scsi: lpfc: Fix RSCN timeout due to incorrect gidft counter

In configs with a large number of initiators in the same zone (>250), RSCN
timeouts are seen when creating or deleting vports:

   lpfc 0000:07:00.1: 5:(0):0231 RSCN timeout Data: x0 x3

During RSCN processing driver issues GID_FT command to nameserver. A
counter for number of simultaneous GID_FT commands is maintained (an
unsigned value). The counter is incremented when the GID_FT is issued.  If
the GID_FT command fails for some reason the driver retries the GID_FT from
the completion call back. But the counter was decremented before the retry
was issued.  When the second GID_FT completes, the callback again tries to
decrement the counter, possibly wrapping to a very large non-zero value,
which causes the RSCN cleanup code to not execute. Thus the RSCN timeout
failure.

Do not decrement the counter on a retry. Also add defensive checks to
ensure the counter is not decremented if already zero.

Link: https://lore.kernel.org/r/20200803210229.23063-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix no message shown for lpfc_hdw_queue out of range value

If module parameters override the default configuration settings for
hardware queues or irqs, the driver was not notifying the change from
defaults.

Revise such that any changes will result in a kernel log message.

Link: https://lore.kernel.org/r/20200803210229.23063-3-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix FCoE speed reporting

Current Link speed was shown as "unknown" in sysfs for FCoE ports. In this
scenario, the port was working in 20G speed, which happens to not be a
speed handled by the driver.

Add support for all possible link speeds that could get reported from
port_speed field in link state ACQE.

Additionally, as supported_speeds can't be manipulated via the FCoE driver
on a converged ethernet port (it must be managed by the nic function),
don't fill out the supported_speeds field for the fc host object in sysfs.

Revise debug logging to report Link speed mgmt valuess.

Link: https://lore.kernel.org/r/20200803210229.23063-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add missing misc_deregister() for lpfc_init()

lpfc_init() misses a call misc_deregister() in an error path. Add a label
'unregister' to fix it.

Link: https://lore.kernel.org/r/20200731065639.190646-1-jingxiangfeng@huawei.com
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport

We cannot wait on a completion object in the lpfc_nvme_targetport structure
in the _destroy_targetport() code path because the NVMe/fc transport will
free that structure immediately after the .targetport_delete() callback.
This results in a use-after-free, and a crash if slub_debug=FZPU is
enabled.

An earlier fix put put the completion on the stack, but commit 2a0fb340fcc8
("scsi: lpfc: Correct localport timeout duration error") subsequently
changed the code to reference the completion through a pointer in the
object rather than the local stack variable.  Fix this by using the stack
variable directly.

Link: https://lore.kernel.org/r/20200729231011.13240-1-emilne@redhat.com
Fixes: 2a0fb340fcc8 ("scsi: lpfc: Correct localport timeout duration error")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_sas: Add spaces around binary operator "|"

According to the kernel coding style, use one space around the binary "|"
operator.

Add spaces around it.

Link: https://lore.kernel.org/r/1596454442-220565-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd_zbc: Improve zone revalidation

Currently, for zoned disks, since blk_revalidate_disk_zones() requires the
disk capacity to be set already to operate correctly, zones revalidation
can only be done on the second revalidate scan once the gendisk capacity is
set at the end of the first scan. As a result, if zone revalidation fails,
there is no second chance to recover from the failure and the disk capacity
is changed to 0, with the disk left unusable.

This can be improved by shuffling around code, specifically, by moving the
call to sd_zbc_revalidate_zones() from sd_zbc_read_zones() to the end of
sd_revalidate_disk(), after set_capacity_revalidate_and_notify() is called
to set the gendisk capacity. With this change, if sd_zbc_revalidate_zones()
fails on the first scan, the second scan will call it again to recover, if
possible.

Using the new struct scsi_disk fields rev_nr_zones and rev_zone_blocks,
sd_zbc_revalidate_zones() does actual work only if it detects a change with
the disk zone configuration. This means that for a successful zones
revalidation on the first scan, the second scan will not cause another
heavy full check.

While at it, remove the unecesary "extern" declaration of
sd_zbc_read_zones().

Link: https://lore.kernel.org/r/20200731054928.668547-1-damien.lemoal@wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases

In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except
for PTR_ERR. However, in some cases it didn't.

This fix is to call fc_frame_free(fp) before function returns.

Link: https://lore.kernel.org/r/20200729081824.30996-2-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Santosh Vernekar <svernekar@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()

In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then
freed it if ctlr_dev was not NULL. This was causing a memory leak.

Free the fcf even if ctlr_dev is NULL.

Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Santosh Vernekar <svernekar@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Make iscsit_register_transport() return void

This function always returns 0. We can make it return void to simplify the
code. Also, no caller ever checks the return value of this function.

Link: https://lore.kernel.org/r/20200803150008.83920-1-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences

The SCSI midlayer does not allow state transitions from SDEV_BLOCK to
SDEV_BLOCK so calling scsi_target_block() from __rport_fast_io_fail() is
wrong as the port is already blocked.  Similarly, we don't need to call
scsi_target_unblock() afterwards as the function has already done this.

Link: https://lore.kernel.org/r/20200728134833.42547-1-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices

Micron UFS devices require DELAY_AFTER_LPM device quirk in MediaTek
platforms.

Link: https://lore.kernel.org/r/20200729051840.31318-3-stanley.chu@mediatek.com
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"

Some UFS devices require delay after VCC power rail is turned off.
Introduce a device quirk "DELAY_AFTER_LPM" to add 5ms delay after VCC
power-off during suspend flow.

Link: https://lore.kernel.org/r/20200729051840.31318-2-stanley.chu@mediatek.com
Reviewed-by: Andy Teng <andy.teng@mediatek.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged

Commit 5ff843721467 ("scsi: virtio_scsi: unplug LUNs when events missed")
missed a corner case in which all the LUNs are unplugged at the same time.

In this case INQUIRY returns DID_BAD_TARGET. Detect this and unplug the
LUN.

Link: https://lore.kernel.org/r/20200729194806.4933-2-mlevitsk@redhat.com
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: Implement tur_ms_to_ready parameter

The current driver responds to TEST UNIT READY (TUR) with a GOOD status
immediately after a scsi_debug device (LU) is created. This is unrealistic
as even SSDs take some time after power-on before accepting media access
commands.

Add the tur_ms_to_ready parameter whose unit is milliseconds (default 0)
and is the period before which a TUR (or any media access command) will set
the CHECK CONDITION status with a sense key of NOT READY and an additional
sense of "Logical unit is in process of becoming ready".  The period starts
when each scsi_debug device is created.

This patch was prompted by T10 proposal 20-061r2 which was accepted on
2020716. It adds that a TUR in the situation described in the previous
paragraph may set the INFO field (or descriptor) in the sense data to the
estimated number in milliseconds before a subsequent TUR will yield a GOOD
status. This patch follows that advice.

Link: https://lore.kernel.org/r/20200724155531.668144-1-dgilbert@interlog.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: Fix request sense

The SCSI REQUEST SENSE command emulation was found to be broken.  It is a
quite complex command so try and make it do a subset of what it should
do. Remove the attempt to mimic SCSI-1 REQUEST SENSE (i.e. return the sense
data for the previous failed command). Add some reporting of "pollable"
sense data [see spc6r02: 5.12.2]. Keep the IEC mode page MRIE=6 TEST=1
predictive failure reporting.

Link: https://lore.kernel.org/r/20200723194819.545573-1-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix typo in comment for ULP

UPL -> ULP for "Upper Layer Protocol"

Link: https://lore.kernel.org/r/20200728145606.1601726-1-ferruh.yigit@intel.com
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC

In some platforms, VCC regulator may not be declared in device tree to keep
itself "always-on". In this case, hba->vreg_info.vcc is NULL and shall not
be operated during any flow.

Prevent possible NULL hba->vreg_info.vcc access in LPM mode by checking
if it is valid first.

Link: https://lore.kernel.org/r/20200724141627.20094-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Do not put host in iscsi_set_flashnode_param()

If scsi_host_lookup() fails we will jump to put_host which may cause a
panic. Jump to exit_set_fnode instead.

Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: Correct ctrl queue depth

Need to set queue depth for controller devices.

Link: https://lore.kernel.org/r/159562590819.17915.12766718094041027754.stgit@brunhilda
Fixes: 30bda7848a23 ("scsi: hpsa: Increase controller error handling timeout")
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Make TMR notification optional

Add "tmr_notification" configfs attribute to tcmu devices.  If the default
value 0 is used, tcmu only removes aborted commands from qfull_queue.  If
user changes tmr_notification to 1, additionally TMR notifications will be
written to the cmd ring.

Link: https://lore.kernel.org/r/20200726153510.13077-9-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Implement tmr_notify callback

This patch implements the tmr_notify callback for tcmu.  When the callback
is called, tcmu checks the list of aborted commands it received as
parameter:

 - aborted commands in the qfull_queue are removed from the queue and
   target_complete_command is called

 - from the cmd_ids of aborted commands currently uncompleted in cmd ring
   it creates a list of aborted cmd_ids.

Finally a TMR notification is written to cmd ring containing TMR type and
cmd_id list. If there is no space in ring, the TMR notification is queued
on a TMR specific queue.

The TMR specific queue 'tmr_queue' can be seen as a extension of the cmd
ring. At the end of each iexecution of tcmu_complete_commands() we check
whether tmr_queue contains TMRs and try to move them onto the ring. If
tmr_queue is not empty after that, we don't call run_qfull_queue() because
commands must not overtake TMRs.

This way we guarantee that cmd_ids in TMR notification received by
userspace either match an active, not yet completed command or are no
longer valid due to userspace having complete some cmd_ids meanwhile.

New commands that were assigned to an aborted cmd_id will always appear on
the cmd ring _after_ the TMR.

Link: https://lore.kernel.org/r/20200726153510.13077-8-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Fix and simplify timeout handling

During cmd timeout handling in check_timedout_devices(), due to a race, it
can happen that tcmu_set_next_deadline() does not start a timer as
expected:

 1) Either tcmu_check_expired_ring_cmd() checks the inflight_queue or
    tcmu_check_expired_queue_cmd() checks the qfull_queue while jiffies has
    the value X

 2) At the end of the check the queue contains one remaining command with
    deadline X (time_after(X, X) is false and thus the command is not
    handled as being timed out).

 3) After tcmu_check_expired_xxxxx_cmd() a timer interrupt happens and
    jiffies is incremented to X+1.

 4) Now tcmu_set_next_deadline() is called, but it skips the command, since
    time_after(X+1, X) is true. Therefore tcmu_set_next_deadline() finds no
    new deadline and stops the timer, which it shouldn't.

Since commands that time out are removed from inflight_queue or
qfull_queue, we don't need the check with time_after() in
tcmu_set_next_deadline() but can use the deadline from the first cmd in
the queue.

Additionally, replace the remaining time_after() calls in
tcmu_check_expired_xxxxx_cmd() with time_after_eq(), because it is not
useful to set the timeout to deadline but then check for jiffies being
greater than deadline.

Simplify the end of tcmu_handle_completions() and change the check for no
more pending commands from

mb->cmd_tail == mb->cmd_head
to

idr_is_empty(&udev->commands)

because the old check doesn't work correctly if paddings or in the future
TMRs are in the ring.

Finally tcmu_set_next_deadline() was shifted in the source as
preparation for later implementation of tmr_notify callback.

Link: https://lore.kernel.org/r/20200726153510.13077-7-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Factor out new helper ring_insert_padding

The new helper ring_insert_padding is split off from and then called by
queue_cmd_ring. It inserts a padding if necessary.  The new helper will in
a subsequent patch be used during writing of TMR notifications to command
ring.

Link: https://lore.kernel.org/r/20200726153510.13077-6-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Do not queue aborted commands

If tcmu receives an already aborted command, tcmu_queue_cmd() should reject
it.

Link: https://lore.kernel.org/r/20200726153510.13077-5-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Use priv pointer in se_cmd

We initialize and clean up the se_cmd's priv pointer under cmd_ring_lock to
point to the corresponding tcmu_cmd.

In the patch that implements tmr_notify callback in tcmu we will use the
priv pointer.

Link: https://lore.kernel.org/r/20200726153510.13077-4-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Add tmr_notify backend function

Target core is modified to call an optional backend callback function if a
TMR is received or commands are aborted implicitly after a PR command was
received.  The backend function takes as parameters the se_dev, the type of
the TMR, and the list of aborted commands.  If no commands were aborted, an
empty list is supplied.

Link: https://lore.kernel.org/r/20200726153510.13077-3-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: Modify core_tmr_abort_task()

This patch modifies core_tmr_abort_task() to use same looping and locking
scheme as core_tmr_drain_state_list() does.

This frees the state_list element in se_cmd for later use by tmr
notification handling.

Note: __target_check_io_state() now is called with param 0 instead of
dev->dev_attrib.emulate_tas, because tas is not relevant since we always
get ABRT on same session like the aborted command.

Link: https://lore.kernel.org/r/20200726153510.13077-2-bstroesser@ts.fujitsu.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: iscsi: Fix inconsistent debug message

Commit 25cdda95fda7 ("iscsi-target: Fix initial login PDU asynchronous
socket close OOPs") changed the return value of
__iscsi_target_sk_check_close(). However, pr_debug is still printing FALSE
when returning TRUE which is a little confusing.

Link: https://lore.kernel.org/r/20200716100212.4237-3-houpu@bytedance.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: iscsi: Fix login error when receiving

iscsi_target_sk_data_ready() could be invoked indirectly by
iscsi_target_do_login_rx() from the workqueue like this:

iscsi_target_do_login_rx()
  iscsi_target_do_login()
    iscsi_target_do_tx_login_io()
      iscsit_put_login_tx()
        iscsi_login_tx_data()
          tx_data()
            sock_sendmsg_nosec()
              tcp_sendmsg()
                release_sock()
                  sk_backlog_rcv()
                    tcp_v4_do_rcv()
                      tcp_data_ready()
                        iscsi_target_sk_data_ready()

At that time LOGIN_FLAGS_READ_ACTIVE is not cleared and
iscsi_target_sk_data_ready will not read data from the socket. Some iscsi
initiators (libiscsi) will wait forever for a reply.

LOGIN_FLAGS_READ_ACTIVE should be cleared early just after doing the
receive and before writing to the socket in iscsi_target_do_login_rx.

Unfortunately, LOGIN_FLAGS_READ_ACTIVE is also used by sk_state_change to
do login cleanup if a socket was closed at login time. It is supposed to be
cleared after the login PDU is successfully processed and replied.

Introduce another flag, LOGIN_FLAGS_WRITE_ACTIVE, to cover the transmit
part.

Link: https://lore.kernel.org/r/20200716100212.4237-2-houpu@bytedance.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvsas: Move 'core_nr' inside #ifdef and remove unused variable 'res_flag'

Only declare 'core_nr' if its conditions for use are met.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mvsas/mv_init.c: In function ‘mvs_interrupt’:
 drivers/scsi/mvsas/mv_init.c:180:6: warning: variable ‘core_nr’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/mvsas/mv_init.c: In function ‘mvs_ioremap’:
 drivers/scsi/mvsas/mv_init.c:302:36: warning: variable ‘res_flag’ set but not used [-Wunused-but-set-variable]

[mkp: applied follow-up fixup patch]

Link: https://lore.kernel.org/r/20200721164148.2617584-40-lee.jones@linaro.org
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Marvell <kewei@marvell.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Demote a few non-conformant kerneldoc headers

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/esas2r/esas2r_log.c:86: warning: Function parameter or member 'level' not described in 'translate_esas2r_event_level_to_kernel'
 drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'level' not described in 'esas2r_log_master'
 drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'dev' not described in 'esas2r_log_master'
 drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'format' not described in 'esas2r_log_master'
 drivers/scsi/esas2r/esas2r_log.c:120: warning: Function parameter or member 'args' not described in 'esas2r_log_master'
 drivers/scsi/esas2r/esas2r_log.c:183: warning: Function parameter or member 'level' not described in 'esas2r_log'
 drivers/scsi/esas2r/esas2r_log.c:183: warning: Function parameter or member 'format' not described in 'esas2r_log'
 drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'level' not described in 'esas2r_log_dev'
 drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'dev' not described in 'esas2r_log_dev'
 drivers/scsi/esas2r/esas2r_log.c:211: warning: Function parameter or member 'format' not described in 'esas2r_log_dev'
 drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'level' not described in 'esas2r_log_hexdump'
 drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'buf' not described in 'esas2r_log_hexdump'
 drivers/scsi/esas2r/esas2r_log.c:237: warning: Function parameter or member 'len' not described in 'esas2r_log_hexdump'

Link: https://lore.kernel.org/r/20200723122446.1329773-41-lee.jones@linaro.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2i: Add parameter description and rename another

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_iscsi.c:1288: warning: Function parameter or member 'cmds_max' not described in 'bnx2i_session_create'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path'

Link: https://lore.kernel.org/r/20200723122446.1329773-40-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Ensure a blank line precedes next function/header

Fixes the following checkpatch warning:

 CHECK: Please use a blank line after function/struct/union/enum declarations
 #129: FILE: drivers/scsi/bfa/bfa_ioc.c:6913:
  }
 +/*

Link: https://lore.kernel.org/r/20200723122446.1329773-39-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Staticify non-external function 'qedi_get_iscsi_error'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qedi/qedi_iscsi.c:1549:7: warning: no previous prototype for ‘qedi_get_iscsi_error’ [-Wmissing-prototypes]

Link: https://lore.kernel.org/r/20200723122446.1329773-38-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Demote seemingly unintentional kerneldoc header

This is the only use of kerneldoc in the source file and no descriptions
are provided.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qedi/qedi_main.c:1969: warning: Function parameter or member 'qedi' not described in 'qedi_get_nvram_block'

Link: https://lore.kernel.org/r/20200723122446.1329773-37-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Demote seemingly unintentional kerneldoc header

This is the only use of kerneldoc in the source file and no descriptions
are provided.

Also demote standard comment.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_svc.c:3847: warning: Function parameter or member 'bfa' not described in 'bfa_fcport_get_cfg_topology'

Link: https://lore.kernel.org/r/20200723122446.1329773-36-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Demote seemingly unintentional kerneldoc header

This is the only use of kerneldoc in the source file and no
descriptions are provided.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_core.c:1245: warning: Function parameter or member 'bfa' not described in 'bfa_iocfc_qreg'
 drivers/scsi/bfa/bfa_core.c:1245: warning: Function parameter or member 'qreg' not described in 'bfa_iocfc_qreg'

Link: https://lore.kernel.org/r/20200723122446.1329773-35-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Demote non-kerneldoc headers down to standard comment blocks

This is probably historical (Doxygen?).

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_ioc.c:6646: warning: Cannot understand  * @brief hardware error definition
 drivers/scsi/bfa/bfa_ioc.c:6661: warning: Cannot understand  * @brief flash command register data structure
 drivers/scsi/bfa/bfa_ioc.c:6685: warning: Cannot understand  * @brief flash device status register data structure
 drivers/scsi/bfa/bfa_ioc.c:6711: warning: Cannot understand  * @brief flash address register data structure
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'pci_bar' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'wr_cnt' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'rd_cnt' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'ad_cnt' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6732: warning: Function parameter or member 'op' not described in 'bfa_flash_set_cmd'
 drivers/scsi/bfa/bfa_ioc.c:6768: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6807: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6852: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6898: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6914: warning: Cannot understand  * @brief
 drivers/scsi/bfa/bfa_ioc.c:6940: warning: Cannot understand  * @brief

Link: https://lore.kernel.org/r/20200723122446.1329773-34-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Add braces around the one-line if()

In certain configurations esas2r_bugon() is sometimes NULLed by the compiler.

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/esas2r/esas2r_log.c:44:
 drivers/scsi/esas2r/esas2r.h: In function ‘esas2r_rq_init_request’:
 drivers/scsi/esas2r/esas2r.h:1229:17: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
 1229 | esas2r_bugon();
 | ^
 NB: Lots of these - snipped for brevity

Link: https://lore.kernel.org/r/20200723122446.1329773-33-lee.jones@linaro.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Remove set but unused variable 'tmp'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qedi/qedi_fw.c: In function ‘qedi_put_rq_bdq_buf’:
 drivers/scsi/qedi/qedi_fw.c:355:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200723122446.1329773-32-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: be2iscsi: Correct misdocumentation of function param 'ep'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/be2iscsi/be_iscsi.c:1042: warning: Function parameter or member 'ep' not described in 'beiscsi_open_conn'
 drivers/scsi/be2iscsi/be_iscsi.c:1042: warning: Excess function parameter 'beiscsi_ep' description in 'beiscsi_open_conn'

Link: https://lore.kernel.org/r/20200723122446.1329773-31-lee.jones@linaro.org
Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com>
Cc: Ketan Mukadam <ketan.mukadam@broadcom.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Cc: linux-drivers@broadcom.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2i: Add, remove and edit some function parameter descriptions

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_bind_conn_to_iscsi_cid'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Excess function parameter 'conn' description in 'bnx2i_bind_conn_to_iscsi_cid'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:470: warning: Excess function parameter 'cmd' description in 'bnx2i_destroy_cmd_pool'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Function parameter or member 'cls_session' not described in 'bnx2i_drop_session'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'hba' description in 'bnx2i_drop_session'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'session' description in 'bnx2i_drop_session'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:1290: warning: Function parameter or member 'ep' not described in 'bnx2i_session_create'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Function parameter or member 'bnx2i_ep' not described in 'bnx2i_ep_tcp_conn_active'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Excess function parameter 'ep' description in 'bnx2i_ep_tcp_conn_active'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'shost' not described in 'bnx2i_nl_set_path'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path'
 drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path'

Link: https://lore.kernel.org/r/20200723122446.1329773-30-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2i: Fix a whole host of kerneldoc issues

Mainly renames and docrot issues.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_get_rq_buf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:194: warning: Excess function parameter 'conn' description in 'bnx2i_get_rq_buf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_put_rq_buf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:232: warning: Excess function parameter 'conn' description in 'bnx2i_put_rq_buf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_sq_dbell'
 drivers/scsi/bnx2i/bnx2i_hwi.c:269: warning: Excess function parameter 'conn' description in 'bnx2i_ring_sq_dbell'
 drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_ring_dbell_update_sq_params'
 drivers/scsi/bnx2i/bnx2i_hwi.c:293: warning: Excess function parameter 'conn' description in 'bnx2i_ring_dbell_update_sq_params'
 drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_login'
 drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_login'
 drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_login'
 drivers/scsi/bnx2i/bnx2i_hwi.c:331: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_login'
 drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_tmf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:384: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_tmf'
 drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_text'
 drivers/scsi/bnx2i/bnx2i_hwi.c:458: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_text'
 drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_scsicmd'
 drivers/scsi/bnx2i/bnx2i_hwi.c:506: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_scsicmd'
 drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_nopout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_nopout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_nopout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:533: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_nopout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_send_iscsi_logout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Function parameter or member 'task' not described in 'bnx2i_send_iscsi_logout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'conn' description in 'bnx2i_send_iscsi_logout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:590: warning: Excess function parameter 'cmd' description in 'bnx2i_send_iscsi_logout'
 drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Function parameter or member 't' not described in 'bnx2i_ep_ofld_timer'
 drivers/scsi/bnx2i/bnx2i_hwi.c:686: warning: Excess function parameter 'data' description in 'bnx2i_ep_ofld_timer'
 drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_unsol_pdu_adjust_rq'
 drivers/scsi/bnx2i/bnx2i_hwi.c:1672: warning: Excess function parameter 'conn' description in 'bnx2i_unsol_pdu_adjust_rq'
 drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'session' not described in 'bnx2i_queue_scsi_cmd_resp'
 drivers/scsi/bnx2i/bnx2i_hwi.c:1900: warning: Function parameter or member 'cqe' not described in 'bnx2i_queue_scsi_cmd_resp'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'context' not described in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'kcqe' not described in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Function parameter or member 'num_cqe' not described in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'hba' description in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2476: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_indicate_kcqe'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_close'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_close'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2624: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_close'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Function parameter or member 'cm_sk' not described in 'bnx2i_cm_remote_abort'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'hba' description in 'bnx2i_cm_remote_abort'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2641: warning: Excess function parameter 'update_kcqe' description in 'bnx2i_cm_remote_abort'
 drivers/scsi/bnx2i/bnx2i_hwi.c:2677: warning: cannot understand function prototype: 'struct cnic_ulp_ops bnx2i_cnic_cb = '

Link: https://lore.kernel.org/r/20200723122446.1329773-29-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Remove unused variable 'adisc'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_fcs_rport.c: In function ‘bfa_fcs_rport_process_adisc’:
 drivers/scsi/bfa/bfa_fcs_rport.c:2243:21: warning: variable ‘adisc’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200723122446.1329773-28-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Demote non-compliant kerneldoc headers to standard comments

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_ioc_ct.c:504: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ctx_hwif'
 drivers/scsi/bfa/bfa_ioc_ct.c:504: warning: Function parameter or member 'hwif' not described in 'bfa_ioc_set_ctx_hwif'
 drivers/scsi/bfa/bfa_ioc_ct.c:525: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ct_hwif'
 drivers/scsi/bfa/bfa_ioc_ct.c:540: warning: Function parameter or member 'ioc' not described in 'bfa_ioc_set_ct2_hwif'

Link: https://lore.kernel.org/r/20200723122446.1329773-26-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Add missing description for csio_rnode_fwevt_handler()'s 'fwevt' param

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_rnode.c:869: warning: Function parameter or member 'fwevt' not described in 'csio_rnode_fwevt_handler'

Link: https://lore.kernel.org/r/20200723122446.1329773-25-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Staticify non-external functions

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_ioc.c:5023:1: warning: no previous prototype for ‘bfa_diag_intr’ [-Wmissing-prototypes]
 5023 | bfa_diag_intr(void *diagarg, struct bfi_mbmsg_s *msg)
 | ^~~~~~~~~~~~~
 drivers/scsi/bfa/bfa_ioc.c:6966:1: warning: no previous prototype for ‘bfa_flash_sem_get’ [-Wmissing-prototypes]
 6966 | bfa_flash_sem_get(void __iomem *bar)
 | ^~~~~~~~~~~~~~~~~
 drivers/scsi/bfa/bfa_ioc.c:6979:1: warning: no previous prototype for ‘bfa_flash_sem_put’ [-Wmissing-prototypes]
 6979 | bfa_flash_sem_put(void __iomem *bar)
 | ^~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-24-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Remove 2 unused variables {mc,edc}_bist_status_rdata_reg

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_hw_t5.c: In function ‘csio_t5_mc_read’:
 drivers/scsi/csiostor/csio_hw_t5.c:151:11: warning: variable ‘mc_bist_status_rdata_reg’ set but not used [-Wunused-but-set-variable]
 151 | uint32_t mc_bist_status_rdata_reg, mc_bist_data_pattern_reg;
 | ^~~~~~~~~~~~~~~~~~~~~~~~
 drivers/scsi/csiostor/csio_hw_t5.c: In function ‘csio_t5_edc_read’:
 drivers/scsi/csiostor/csio_hw_t5.c:199:38: warning: variable ‘edc_bist_status_rdata_reg’ set but not used [-Wunused-but-set-variable]
 199 | uint32_t edc_bist_cmd_data_pattern, edc_bist_status_rdata_reg;
 | ^~~~~~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-23-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Mark known unused variable as __always_unused

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_hw.c: In function ‘csio_hw_get_vpd_params’:
 drivers/scsi/csiostor/csio_hw.c:309:8: warning: variable ‘s’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200723122446.1329773-22-lee.jones@linaro.org
Cc: Arkadiusz Drabczyk <arkadiusz@drabczyk.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Remove a few unused variables 'pgoff' and 't'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_iocpf_sm_fwcheck_entry’:
 drivers/scsi/bfa/bfa_ioc.c:704:27: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_fwver_get’:
 drivers/scsi/bfa/bfa_ioc.c:1443:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_fwsig_invalidate’:
 drivers/scsi/bfa/bfa_ioc.c:1665:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_ioc_download_fw’:
 drivers/scsi/bfa/bfa_ioc.c:1866:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_diag_memtest_done’:
 drivers/scsi/bfa/bfa_ioc.c:4766:13: warning: variable ‘pgoff’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/bfa/bfa_ioc.c: In function ‘bfa_flash_fifo_flush’:
 drivers/scsi/bfa/bfa_ioc.c:6787:6: warning: variable ‘t’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200723122446.1329773-21-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add description for lpfc_release_rpi()'s 'ndlpl param

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_nportdisc.c:1079: warning: Function parameter or member 'ndlp' not described in 'lpfc_release_rpi'

Link: https://lore.kernel.org/r/20200723122446.1329773-20-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix a bunch of kerneldoc misdemeanors

Adding, removing and correcting function parameter descriptions.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Function parameter or member 'vport' not described in 'lpfc_reg_vpi'
 drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'phba' description in 'lpfc_reg_vpi'
 drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'vpi' description in 'lpfc_reg_vpi'
 drivers/scsi/lpfc/lpfc_mbox.c:886: warning: Excess function parameter 'sid' description in 'lpfc_reg_vpi'
 drivers/scsi/lpfc/lpfc_mbox.c:1218: warning: Function parameter or member 'ring' not described in 'lpfc_config_ring'
 drivers/scsi/lpfc/lpfc_mbox.c:1626: warning: Function parameter or member 'mboxq' not described in 'lpfc_mbox_tmo_val'
 drivers/scsi/lpfc/lpfc_mbox.c:1626: warning: Excess function parameter 'cmd' description in 'lpfc_mbox_tmo_val'
 drivers/scsi/lpfc/lpfc_mbox.c:1710: warning: Function parameter or member 'sge' not described in 'lpfc_sli4_mbx_sge_get'
 drivers/scsi/lpfc/lpfc_mbox.c:1780: warning: Function parameter or member 'emb' not described in 'lpfc_sli4_config'
 drivers/scsi/lpfc/lpfc_mbox.c:2027: warning: Function parameter or member 'mboxq' not described in 'lpfc_sli4_mbx_read_fcf_rec'
 drivers/scsi/lpfc/lpfc_mbox.c:2078: warning: Function parameter or member 'phba' not described in 'lpfc_request_features'

Link: https://lore.kernel.org/r/20200723122446.1329773-19-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Rename function parameter descriptions

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_process_vendor_specific'
 drivers/scsi/qla4xxx/ql4_bsg.c:811: warning: Excess function parameter 'job' description in 'qla4xxx_process_vendor_specific'
 drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Function parameter or member 'bsg_job' not described in 'qla4xxx_bsg_request'
 drivers/scsi/qla4xxx/ql4_bsg.c:858: warning: Excess function parameter 'job' description in 'qla4xxx_bsg_request'

Link: https://lore.kernel.org/r/20200723122446.1329773-18-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add and rename a whole bunch of function parameter descriptions

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_init.c:1136: warning: Function parameter or member 't' not described in 'lpfc_hb_timeout'
 drivers/scsi/lpfc/lpfc_init.c:1136: warning: Excess function parameter 'ptr' description in 'lpfc_hb_timeout'
 drivers/scsi/lpfc/lpfc_init.c:1170: warning: Function parameter or member 't' not described in 'lpfc_rrq_timeout'
 drivers/scsi/lpfc/lpfc_init.c:1170: warning: Excess function parameter 'ptr' description in 'lpfc_rrq_timeout'
 drivers/scsi/lpfc/lpfc_init.c:1232: warning: Function parameter or member 'work' not described in 'lpfc_idle_stat_delay_work'
 drivers/scsi/lpfc/lpfc_init.c:1817: warning: Function parameter or member 'en_rn_msg' not described in 'lpfc_sli4_port_sta_fn_reset'
 drivers/scsi/lpfc/lpfc_init.c:3033: warning: Function parameter or member 'mbx_action' not described in 'lpfc_block_mgmt_io'
 drivers/scsi/lpfc/lpfc_init.c:3481: warning: Function parameter or member 'mbx_action' not described in 'lpfc_offline_prep'
 drivers/scsi/lpfc/lpfc_init.c:4150: warning: Function parameter or member 'phba' not described in 'lpfc_new_io_buf'
 drivers/scsi/lpfc/lpfc_init.c:4150: warning: Function parameter or member 'num_to_alloc' not described in 'lpfc_new_io_buf'
 drivers/scsi/lpfc/lpfc_init.c:4150: warning: Excess function parameter 'vport' description in 'lpfc_new_io_buf'
 drivers/scsi/lpfc/lpfc_init.c:4150: warning: Excess function parameter 'num_to_allocate' description in 'lpfc_new_io_buf'
 drivers/scsi/lpfc/lpfc_init.c:4736: warning: Function parameter or member 't' not described in 'lpfc_sli4_fcf_redisc_wait_tmo'
 drivers/scsi/lpfc/lpfc_init.c:4736: warning: Excess function parameter 'ptr' description in 'lpfc_sli4_fcf_redisc_wait_tmo'
 drivers/scsi/lpfc/lpfc_init.c:5103: warning: Excess function parameter 'evt_code' description in 'lpfc_async_link_speed_to_read_top'
 drivers/scsi/lpfc/lpfc_init.c:5377: warning: Function parameter or member 'acqe_sli' not described in 'lpfc_sli4_async_sli_evt'
 drivers/scsi/lpfc/lpfc_init.c:5377: warning: Excess function parameter 'acqe_fc' description in 'lpfc_sli4_async_sli_evt'
 drivers/scsi/lpfc/lpfc_init.c:5634: warning: Function parameter or member 'phba' not described in 'lpfc_sli4_perform_all_vport_cvl'
 drivers/scsi/lpfc/lpfc_init.c:5634: warning: Excess function parameter 'vport' description in 'lpfc_sli4_perform_all_vport_cvl'
 drivers/scsi/lpfc/lpfc_init.c:5655: warning: Function parameter or member 'acqe_fip' not described in 'lpfc_sli4_async_fip_evt'
 drivers/scsi/lpfc/lpfc_init.c:5655: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_fip_evt'
 drivers/scsi/lpfc/lpfc_init.c:5908: warning: Function parameter or member 'acqe_dcbx' not described in 'lpfc_sli4_async_dcbx_evt'
 drivers/scsi/lpfc/lpfc_init.c:5908: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_dcbx_evt'
 drivers/scsi/lpfc/lpfc_init.c:5927: warning: Function parameter or member 'acqe_grp5' not described in 'lpfc_sli4_async_grp5_evt'
 drivers/scsi/lpfc/lpfc_init.c:5927: warning: Excess function parameter 'acqe_link' description in 'lpfc_sli4_async_grp5_evt'
 drivers/scsi/lpfc/lpfc_init.c:7279: warning: Function parameter or member 'iocb_count' not described in 'lpfc_init_iocb_list'
 drivers/scsi/lpfc/lpfc_init.c:8227: warning: Function parameter or member 'if_type' not described in 'lpfc_sli4_bar1_register_memmap'
 drivers/scsi/lpfc/lpfc_init.c:8414: warning: Excess function parameter 'phba' description in 'LINK_FLAGS_DEF'
 drivers/scsi/lpfc/lpfc_init.c:8414: warning: Excess function parameter 'rdconf' description in 'LINK_FLAGS_DEF'
 drivers/scsi/lpfc/lpfc_init.c:10734: warning: Function parameter or member 'cfg_mode' not described in 'lpfc_sli_enable_intr'
 drivers/scsi/lpfc/lpfc_init.c:11241: warning: Function parameter or member 'eqlist' not described in 'lpfc_cpuhp_get_eq'
 drivers/scsi/lpfc/lpfc_init.c:11726: warning: Function parameter or member 'cfg_mode' not described in 'lpfc_sli4_enable_intr'
 drivers/scsi/lpfc/lpfc_init.c:12997: warning: Excess function parameter 'ret' description in 'lpfc_write_firmware'
 drivers/scsi/lpfc/lpfc_init.c:13103: warning: Function parameter or member 'fw_upgrade' not described in 'lpfc_sli4_request_firmware_update'

Link: https://lore.kernel.org/r/20200723122446.1329773-17-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Use __printf() format notation

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_init.c: In function ‘lpfc_dbg_print’:
 drivers/scsi/lpfc/lpfc_init.c:14212:6: warning: function ‘lpfc_dbg_print’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
 14212 | sizeof(phba->dbg_log[idx].log), fmt, args);
 | ^~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-16-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Remove set but unused variable 'status'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_83xx.c: In function ‘qla4_83xx_dump_pause_control_regs’:
 drivers/scsi/qla4xxx/ql4_83xx.c:1409:9: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
 1409 | int i, status = QLA_SUCCESS;
 | ^~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-15-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ips: Convert strnlen() to memcpy() since result should not be NUL terminated

Fixes the following W=1 kernel build warning(s):

 In file included from arch/arm/include/asm/io.h:23,
 from drivers/scsi/ips.c:164:
 In function ‘strncpy’,
 inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6:
 include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output
 truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation]
 297 | #define __underlying_strncpy __builtin_strncpy
 | ^
 include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
 307 | return __underlying_strncpy(p, q, size);
 | ^~~~~~~~~~~~~~~~~~~~
 NB: Lots of these - snipping for brevity

Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: ipslinux@adaptec.com
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ips: Remove some set but unused variables

Intentionally keeping all register reads/writes.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ips.c: In function ‘ips_init_copperhead’:
 drivers/scsi/ips.c:4700:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable]
 4700 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
 | ^~~~~~~~~~
 drivers/scsi/ips.c: In function ‘ips_init_copperhead_memio’:
 drivers/scsi/ips.c:4794:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable]
 4794 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES];
 | ^~~~~~~~~~
 drivers/scsi/ips.c: In function ‘ips_init_phase1’:
 drivers/scsi/ips.c:6839:10: warning: variable ‘func’ set but not used [-Wunused-but-set-variable]
 6839 | uint8_t func;
 | ^~~~
 drivers/scsi/ips.c:6838:10: warning: variable ‘bus’ set but not used [-Wunused-but-set-variable]
 6838 | uint8_t bus;
 | ^~~

Link: https://lore.kernel.org/r/20200723122446.1329773-13-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: ipslinux@adaptec.com
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedi: Remove 2 set but unused variables

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qedi/qedi_main.c: In function ‘qedi_queue_cqe’:
 drivers/scsi/qedi/qedi_main.c:1158:21: warning: variable ‘conn’ set but not used [-Wunused-but-set-variable]
 1158 | struct iscsi_conn *conn;
 | ^~~~
 drivers/scsi/qedi/qedi_main.c: In function ‘__qedi_probe’:
 drivers/scsi/qedi/qedi_main.c:2432:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
 2432 | u16 tmp;
 | ^~~

Link: https://lore.kernel.org/r/20200723122446.1329773-12-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@cavium.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Demote seemingly unintentional kerneldoc header

This is the only use of kerneldoc in the source file and no descriptions
are provided.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_fcpim.c:3829: warning: Function parameter or member 'bfa' not described in 'bfa_fcpim_get_throttle_cfg'
 drivers/scsi/bfa/bfa_fcpim.c:3829: warning: Function parameter or member 'drv_cfg_param' not described in 'bfa_fcpim_get_throttle_cfg'

Link: https://lore.kernel.org/r/20200723122446.1329773-11-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Remove set but unused variable 'rp'

This change subsequently makes 'rp_fcs' unused also.  Remove that too.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_fcpim.c: In function ‘bfa_fcpim_lunmask_delete’:
 drivers/scsi/bfa/bfa_fcpim.c:2338:22: warning: variable ‘rp’ set but not used [-Wunused-but-set-variable]
 2338 | struct bfa_rport_s *rp = NULL;
 | ^~

Link: https://lore.kernel.org/r/20200723122446.1329773-10-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2i: Add missing descriptions for 'attr' parameter

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_sysfs.c:40: warning: Function parameter or member 'attr' not described in 'bnx2i_show_sq_info'
 drivers/scsi/bnx2i/bnx2i_sysfs.c:60: warning: Function parameter or member 'attr' not described in 'bnx2i_set_sq_info'
 drivers/scsi/bnx2i/bnx2i_sysfs.c:96: warning: Function parameter or member 'attr' not described in 'bnx2i_show_ccell_info'
 drivers/scsi/bnx2i/bnx2i_sysfs.c:114: warning: Function parameter or member 'attr' not described in 'bnx2i_set_ccell_info'

Link: https://lore.kernel.org/r/20200723122446.1329773-9-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Staticify local functions

These calls are not invoked externally.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfa_port.c:760:1: warning: no previous prototype for ‘bfa_cee_isr’ [-Wmissing-prototypes]
 760 | bfa_cee_isr(void *cbarg, struct bfi_mbmsg_s *m)
 | ^~~~~~~~~~~
 drivers/scsi/bfa/bfa_port.c:796:1: warning: no previous prototype for ‘bfa_cee_notify’ [-Wmissing-prototypes]
 796 | bfa_cee_notify(void *arg, enum bfa_ioc_event_e event)
 | ^~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200723122446.1329773-8-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Demote seemingly unintentional kerneldoc header

This is the only use of kerneldoc in the source file and no descriptions
are provided.

Fixes the following W=1 kernel build warning(s):

In file included from  drivers/scsi/ufs/ufs-exynos.c:23:
 drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'ufs' not described in 'exynos_ufs_auto_ctrl_hcc'
 drivers/scsi/ufs/ufs-exynos.c:234: warning: Function parameter or member 'en' not described in 'exynos_ufs_auto_ctrl_hcc'

Link: https://lore.kernel.org/r/20200723122446.1329773-7-lee.jones@linaro.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Seungwon Jeon <essuuj@gmail.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2i: Fix parameter misnaming in function header

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Function parameter or member 'dev' not described in 'bnx2i_identify_device'
 drivers/scsi/bnx2i/bnx2i_init.c:83: warning: Excess function parameter 'cnic' description in 'bnx2i_identify_device'

Link: https://lore.kernel.org/r/20200723122446.1329773-5-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Cc: Anil Veerabhadrappa <anilgv@broadcom.com>
Cc: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-qcom: Demote nonconformant kerneldoc headers

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ufs/ufs-qcom.c:253: warning: Function parameter or member 'hba' not described in 'ufs_qcom_host_reset'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'hba' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'gear' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'hs' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'rate' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:383: warning: Function parameter or member 'update_link_startup_timer' not described in 'ufs_qcom_cfg_timers'
 drivers/scsi/ufs/ufs-qcom.c:1738: error: Cannot parse struct or union!

Link: https://lore.kernel.org/r/20200723122446.1329773-4-lee.jones@linaro.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix kerneldoc parameter formatting/misnaming/missing issues

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_hbadisc.c:1209: warning: Function parameter or member 'phba' not described in 'lpfc_sli4_clear_fcf_rr_bmask'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1309: warning: Function parameter or member 'sw_name' not described in 'lpfc_sw_name_match'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1309: warning: Excess function parameter 'fab_name' description in 'lpfc_sw_name_match'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1397: warning: Function parameter or member 'fcf_rec' not described in 'lpfc_copy_fcf_record'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1397: warning: Excess function parameter 'fcf' description in 'lpfc_copy_fcf_record'
 drivers/scsi/lpfc/lpfc_hbadisc.c:1956: warning: Cannot understand  lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF
 on line 1956 - I thought it was a doc line
 drivers/scsi/lpfc/lpfc_hbadisc.c:2078: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_pri_list_del'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2109: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_set_fcf_flogi_fail'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2135: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_pri_list_add'
 drivers/scsi/lpfc/lpfc_hbadisc.c:2135: warning: Function parameter or member 'new_fcf_record' not described in 'lpfc_sli4_fcf_pri_list_add'

Link: https://lore.kernel.org/r/20200723122446.1329773-3-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix some function parameter descriptions

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_els.c:3619: warning: Function parameter or member 't' not described in 'lpfc_els_retry_delay'
 drivers/scsi/lpfc/lpfc_els.c:3619: warning: Excess function parameter 'ptr' description in 'lpfc_els_retry_delay'
 drivers/scsi/lpfc/lpfc_els.c:4877: warning: Function parameter or member 'rejectError' not described in 'lpfc_els_rsp_reject'
 drivers/scsi/lpfc/lpfc_els.c:7900: warning: Function parameter or member 't' not described in 'lpfc_els_timeout'
 drivers/scsi/lpfc/lpfc_els.c:7900: warning: Excess function parameter 'ptr' description in 'lpfc_els_timeout'
 drivers/scsi/lpfc/lpfc_els.c:8272: warning: Function parameter or member 'payload' not described in 'lpfc_send_els_event'
 drivers/scsi/lpfc/lpfc_els.c:8272: warning: Excess function parameter 'cmd' description in 'lpfc_send_els_event'
 drivers/scsi/lpfc/lpfc_els.c:8355: warning: Function parameter or member 'tlv' not described in 'lpfc_els_rcv_fpin_li'
 drivers/scsi/lpfc/lpfc_els.c:8355: warning: Excess function parameter 'lnk_not' description in 'lpfc_els_rcv_fpin_li'
 drivers/scsi/lpfc/lpfc_els.c:9688: warning: Function parameter or member 't' not described in 'lpfc_fabric_block_timeout'
 drivers/scsi/lpfc/lpfc_els.c:9688: warning: Excess function parameter 'ptr' description in 'lpfc_fabric_block_timeout'

Link: https://lore.kernel.org/r/20200723122446.1329773-2-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxgb3i: Remove bad documentation and demote kerneldoc header

Also move the header block above the correct function.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Function parameter or member 'dev' not described in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Function parameter or member 'skb' not described in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Excess function parameter 'c3cn' description in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:390: warning: Excess function parameter 'req_completion' description in 'arp_failure_skb_discard'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:895: warning: Function parameter or member 'csk' not described in 'l2t_put'
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c:895: warning: Excess function parameter 'c3cn' description in 'l2t_put'

Link: https://lore.kernel.org/r/20200721164148.2617584-41-lee.jones@linaro.org
Cc: Karen Xie <kxie@chelsio.com>
Cc: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sym53c8xx_2: Ensure variable has the same stipulations as code using it

Only declare 'tp' and 'lp' if they are going to be used.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sym53c8xx_2/sym_hipd.c: In function ‘sym_complete_error’:
 drivers/scsi/sym53c8xx_2/sym_hipd.c:5356:18: warning: variable ‘lp’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/sym53c8xx_2/sym_hipd.c: In function ‘sym_complete_ok’:
 drivers/scsi/sym53c8xx_2/sym_hipd.c:5485:18: warning: variable ‘lp’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200721164148.2617584-39-lee.jones@linaro.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Gerard Roudier <groudier@free.fr>
Cc: Wolfgang Stanglmeier <wolf@cologne.de>
Cc: Stefan Esser <se@mi.Uni-Koeln.de>
Cc: Richard Waltham <dormouse@farsrobt.demon.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sym53c8xx_2: Add missing description for 'pdev'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/sym53c8xx_2/sym_glue.c:1784: warning: Function parameter or member 'pdev' not described in 'sym2_reset_workarounds'

Link: https://lore.kernel.org/r/20200721164148.2617584-38-lee.jones@linaro.org
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Gerard Roudier <groudier@free.fr>
Cc: Wolfgang Stanglmeier <wolf@cologne.de>
Cc: Stefan Esser <se@mi.Uni-Koeln.de>
Cc: Richard Waltham <dormouse@farsrobt.demon.co.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Ensure variable has the same stipulations as code using it

'pg_addr' is only used when CONFIG_X86 is defined.  So only declare it if
CONFIG_X86 is defined.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_sli.c: In function ‘lpfc_wq_create’:
 drivers/scsi/lpfc/lpfc_sli.c:15813:16: warning: unused variable ‘pg_addr’ [-Wunused-variable]
 15813 | unsigned long pg_addr;
 | ^~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-37-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Staticify all local functions

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/bfa/bfad_bsg.c:19:1: warning: no previous prototype for ‘bfad_iocmd_ioc_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:42:1: warning: no previous prototype for ‘bfad_iocmd_ioc_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:150:1: warning: no previous prototype for ‘bfad_iocmd_ioc_get_fwstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:180:1: warning: no previous prototype for ‘bfad_iocmd_ioc_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:198:1: warning: no previous prototype for ‘bfad_iocmd_ioc_set_name’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:212:1: warning: no previous prototype for ‘bfad_iocmd_iocfc_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:223:1: warning: no previous prototype for ‘bfad_iocmd_ioc_fw_sig_inv’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:235:1: warning: no previous prototype for ‘bfad_iocmd_iocfc_set_intr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:248:1: warning: no previous prototype for ‘bfad_iocmd_port_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:269:1: warning: no previous prototype for ‘bfad_iocmd_port_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:319:1: warning: no previous prototype for ‘bfad_iocmd_port_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:353:1: warning: no previous prototype for ‘bfad_iocmd_port_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:374:1: warning: no previous prototype for ‘bfad_iocmd_set_port_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:394:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_maxfrsize’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:408:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_bbcr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:431:1: warning: no previous prototype for ‘bfad_iocmd_port_get_bbcr_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:469:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:493:1: warning: no previous prototype for ‘bfad_iocmd_lport_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:527:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_iostats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:552:1: warning: no previous prototype for ‘bfad_iocmd_lport_get_rports’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:594:1: warning: no previous prototype for ‘bfad_iocmd_rport_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:680:1: warning: no previous prototype for ‘bfad_iocmd_rport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:721:1: warning: no previous prototype for ‘bfad_iocmd_rport_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:757:1: warning: no previous prototype for ‘bfad_iocmd_rport_set_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:793:1: warning: no previous prototype for ‘bfad_iocmd_vport_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:816:1: warning: no previous prototype for ‘bfad_iocmd_vport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:844:1: warning: no previous prototype for ‘bfad_iocmd_vport_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:911:1: warning: no previous prototype for ‘bfad_iocmd_qos_set_bw’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:924:1: warning: no previous prototype for ‘bfad_iocmd_ratelim’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:953:1: warning: no previous prototype for ‘bfad_iocmd_ratelim_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:982:1: warning: no previous prototype for ‘bfad_iocmd_cfg_fcpim’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:995:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_get_modstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1017:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_clr_modstats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1039:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_get_del_itn_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1164:1: warning: no previous prototype for ‘bfad_iocmd_fcport_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1177:1: warning: no previous prototype for ‘bfad_iocmd_fcport_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1190:1: warning: no previous prototype for ‘bfad_iocmd_ioc_get_pcifn_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1212:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_create’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1235:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_delete’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1257:1: warning: no previous prototype for ‘bfad_iocmd_pcifn_bw’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1281:1: warning: no previous prototype for ‘bfad_iocmd_adapter_cfg_mode’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1304:1: warning: no previous prototype for ‘bfad_iocmd_port_cfg_mode’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1328:1: warning: no previous prototype for ‘bfad_iocmd_ablk_optrom’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1354:1: warning: no previous prototype for ‘bfad_iocmd_faa_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1377:1: warning: no previous prototype for ‘bfad_iocmd_cee_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1413:1: warning: no previous prototype for ‘bfad_iocmd_cee_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1450:1: warning: no previous prototype for ‘bfad_iocmd_cee_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1464:1: warning: no previous prototype for ‘bfad_iocmd_sfp_media’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1486:1: warning: no previous prototype for ‘bfad_iocmd_sfp_speed’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1507:1: warning: no previous prototype for ‘bfad_iocmd_flash_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1528:1: warning: no previous prototype for ‘bfad_iocmd_flash_erase_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1548:1: warning: no previous prototype for ‘bfad_iocmd_flash_update_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1580:1: warning: no previous prototype for ‘bfad_iocmd_flash_read_part’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1612:1: warning: no previous prototype for ‘bfad_iocmd_diag_temp’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1634:1: warning: no previous prototype for ‘bfad_iocmd_diag_memtest’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1657:1: warning: no previous prototype for ‘bfad_iocmd_diag_loopback’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1680:1: warning: no previous prototype for ‘bfad_iocmd_diag_fwping’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1704:1: warning: no previous prototype for ‘bfad_iocmd_diag_queuetest’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1725:1: warning: no previous prototype for ‘bfad_iocmd_diag_sfp’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1748:1: warning: no previous prototype for ‘bfad_iocmd_diag_led’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1761:1: warning: no previous prototype for ‘bfad_iocmd_diag_beacon_lport’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1776:1: warning: no previous prototype for ‘bfad_iocmd_diag_lb_stat’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1791:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_enable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1813:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_disable’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1833:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_start’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1858:1: warning: no previous prototype for ‘bfad_iocmd_diag_dport_show’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1873:1: warning: no previous prototype for ‘bfad_iocmd_phy_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1894:1: warning: no previous prototype for ‘bfad_iocmd_phy_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1915:1: warning: no previous prototype for ‘bfad_iocmd_phy_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1947:1: warning: no previous prototype for ‘bfad_iocmd_vhba_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1966:1: warning: no previous prototype for ‘bfad_iocmd_phy_update’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:1996:1: warning: no previous prototype for ‘bfad_iocmd_porglog_get’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2016:1: warning: no previous prototype for ‘bfad_iocmd_debug_fw_core’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2050:1: warning: no previous prototype for ‘bfad_iocmd_debug_ctl’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2071:1: warning: no previous prototype for ‘bfad_iocmd_porglog_ctl’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2085:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_cfg_profile’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2129:1: warning: no previous prototype for ‘bfad_iocmd_fcport_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2154:1: warning: no previous prototype for ‘bfad_iocmd_fcport_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2178:1: warning: no previous prototype for ‘bfad_iocmd_boot_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2200:1: warning: no previous prototype for ‘bfad_iocmd_boot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2222:1: warning: no previous prototype for ‘bfad_iocmd_preboot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2241:1: warning: no previous prototype for ‘bfad_iocmd_ethboot_cfg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2264:1: warning: no previous prototype for ‘bfad_iocmd_ethboot_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2287:1: warning: no previous prototype for ‘bfad_iocmd_cfg_trunk’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2327:1: warning: no previous prototype for ‘bfad_iocmd_trunk_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2350:1: warning: no previous prototype for ‘bfad_iocmd_qos’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2378:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2404:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_vc_attr’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2436:1: warning: no previous prototype for ‘bfad_iocmd_qos_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2468:1: warning: no previous prototype for ‘bfad_iocmd_qos_reset_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2499:1: warning: no previous prototype for ‘bfad_iocmd_vf_get_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2522:1: warning: no previous prototype for ‘bfad_iocmd_vf_clr_stats’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2559:1: warning: no previous prototype for ‘bfad_iocmd_lunmask’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2582:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_lunmask_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2596:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_cfg_lunmask’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2615:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_throttle_query’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2630:1: warning: no previous prototype for ‘bfad_iocmd_fcpim_throttle_set’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2645:1: warning: no previous prototype for ‘bfad_iocmd_tfru_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2667:1: warning: no previous prototype for ‘bfad_iocmd_tfru_write’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2689:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_read’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2711:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_update’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:2733:1: warning: no previous prototype for ‘bfad_iocmd_fruvpd_get_max_size’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3181:1: warning: no previous prototype for ‘bfad_fcxp_get_req_sgaddr_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3193:1: warning: no previous prototype for ‘bfad_fcxp_get_req_sglen_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3203:1: warning: no previous prototype for ‘bfad_fcxp_get_rsp_sgaddr_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3215:1: warning: no previous prototype for ‘bfad_fcxp_get_rsp_sglen_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3225:1: warning: no previous prototype for ‘bfad_send_fcpt_cb’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3240:1: warning: no previous prototype for ‘bfad_fcxp_map_sg’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3284:1: warning: no previous prototype for ‘bfad_fcxp_free_mem’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3302:1: warning: no previous prototype for ‘bfad_fcxp_bsg_send’ [-Wmissing-prototypes]
 drivers/scsi/bfa/bfad_bsg.c:3342:1: warning: no previous prototype for ‘bfad_im_bsg_els_ct_request’ [-Wmissing-prototypes]

Link: https://lore.kernel.org/r/20200721164148.2617584-36-lee.jones@linaro.org
Cc: Anil Gurumurthy <anil.gurumurthy@qlogic.com>
Cc: Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Demote kerneldoc that fails to meet the criteria

This matches some of the other headers in the file.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_lnode.c:2079: warning: Function parameter or member 'hw' not described in 'csio_lnode_init'
 drivers/scsi/csiostor/csio_lnode.c:2079: warning: Function parameter or member 'pln' not described in 'csio_lnode_init'

Link: https://lore.kernel.org/r/20200721164148.2617584-35-lee.jones@linaro.org
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Supply description for 'code'

Demote other headers which are clearly not kerneldoc.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'ha' not described in 'qla4_82xx_pinit_from_rom'
 drivers/scsi/qla4xxx/ql4_nx.c:983: warning: Function parameter or member 'verbose' not described in 'qla4_82xx_pinit_from_rom'
 drivers/scsi/qla4xxx/ql4_nx.c:3225: warning: Function parameter or member 'code' not described in 'qla4_8xxx_uevent_emit'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'ha' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'buf' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'offset' not described in 'qla4_82xx_read_optrom_data'
 drivers/scsi/qla4xxx/ql4_nx.c:3697: warning: Function parameter or member 'length' not described in 'qla4_82xx_read_optrom_data'

Link: https://lore.kernel.org/r/20200721164148.2617584-34-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Remove three set but unused variables

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_rddfe’:
 drivers/scsi/qla4xxx/ql4_nx.c:2648:23: warning: variable ‘data_size’ set but not used [-Wunused-but-set-variable]
 2648 | uint32_t poll, mask, data_size, modify_mask;
 | ^~~~~~~~~
 drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_rdmdio’:
 drivers/scsi/qla4xxx/ql4_nx.c:2745:11: warning: variable ‘poll’ set but not used [-Wunused-but-set-variable]
 2745 | uint32_t poll, mask;
 | ^~~~
 drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_84xx_minidump_process_pollwr’:
 drivers/scsi/qla4xxx/ql4_nx.c:2816:47: warning: variable ‘mask’ set but not used [-Wunused-but-set-variable]
 2816 | uint32_t addr1, addr2, value1, value2, poll, mask, r_value;
 | ^~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-33-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Fix misnamed function parameter

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/csiostor/csio_init.c:595: warning: Function parameter or member 'pln' not described in 'csio_shost_init'
 drivers/scsi/csiostor/csio_init.c:595: warning: Excess function parameter 'os_pln' description in 'csio_shost_init'

Link: https://lore.kernel.org/r/20200721164148.2617584-32-lee.jones@linaro.org
Cc: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix-up formatting/docrot where appropriate

Other headers have been demoted as they are too far out of sync and ideally
require effort from the authors.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'usr_flg' not described in 'lpfc_gen_req'
 drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'num_entry' not described in 'lpfc_gen_req'
 drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'tmo' not described in 'lpfc_gen_req'
 drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'retry' not described in 'lpfc_gen_req'
 drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'rsp_size' not described in 'lpfc_ct_cmd'
 drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'retry' not described in 'lpfc_ct_cmd'
 drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'cmdcode' not described in 'lpfc_fdmi_cmd'
 drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'new_mask' not described in 'lpfc_fdmi_cmd'
 drivers/scsi/lpfc/lpfc_ct.c:3272: warning: Function parameter or member 't' not described in 'lpfc_delayed_disc_tmo'

Link: https://lore.kernel.org/r/20200721164148.2617584-31-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Document qla4xxx_process_ddb()'s 'conn_err'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_init.c:1170: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed'

Link: https://lore.kernel.org/r/20200721164148.2617584-30-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Provide description for lpfc_mem_alloc()'s 'align' param

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_mem.c:85: warning: Function parameter or member 'align' not described in 'lpfc_mem_alloc'

Link: https://lore.kernel.org/r/20200721164148.2617584-29-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Repair function documentation headers

Fix one formatting issue, one misspelling and three missing descriptions.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_isr.c:588: warning: Excess function parameter 'ret' description in 'qla4_83xx_loopback_in_progress'
 drivers/scsi/qla4xxx/ql4_isr.c:661: warning: Function parameter or member 'mbox_status' not described in 'qla4xxx_isr_decode_mailbox'
 drivers/scsi/qla4xxx/ql4_isr.c:661: warning: Excess function parameter 'mailbox_status' description in 'qla4xxx_isr_decode_mailbox'
 drivers/scsi/qla4xxx/ql4_isr.c:1053: warning: Function parameter or member 'intr_status' not described in 'qla4_82xx_interrupt_service_routine'
 drivers/scsi/qla4xxx/ql4_isr.c:1078: warning: Function parameter or member 'intr_status' not described in 'qla4xxx_interrupt_service_routine'

Link: https://lore.kernel.org/r/20200721164148.2617584-28-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Fix some kerneldoc parameter documentation issues

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_os.c:4551: warning: Function parameter or member 't' not described in 'qla4xxx_timer'
 drivers/scsi/qla4xxx/ql4_os.c:4551: warning: Excess function parameter 'ha' description in 'qla4xxx_timer'
 drivers/scsi/qla4xxx/ql4_os.c:5312: warning: Function parameter or member 'work' not described in 'qla4xxx_do_dpc'
 drivers/scsi/qla4xxx/ql4_os.c:5312: warning: Excess function parameter 'data' description in 'qla4xxx_do_dpc'
 drivers/scsi/qla4xxx/ql4_os.c:8627: warning: Function parameter or member 'ent' not described in 'qla4xxx_probe_adapter'
 drivers/scsi/qla4xxx/ql4_os.c:8627: warning: Excess function parameter 'pci_device_id' description in 'qla4xxx_probe_adapter'
 drivers/scsi/qla4xxx/ql4_os.c:9008: warning: Function parameter or member 'pdev' not described in 'qla4xxx_remove_adapter'
 drivers/scsi/qla4xxx/ql4_os.c:9008: warning: Excess function parameter 'pci_dev' description in 'qla4xxx_remove_adapter'
 drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Function parameter or member 'stgt' not described in 'qla4xxx_eh_wait_for_commands'
 drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Function parameter or member 'sdev' not described in 'qla4xxx_eh_wait_for_commands'
 drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Excess function parameter 't' description in 'qla4xxx_eh_wait_for_commands'
 drivers/scsi/qla4xxx/ql4_os.c:9181: warning: Excess function parameter 'l' description in 'qla4xxx_eh_wait_for_commands'
 drivers/scsi/qla4xxx/ql4_os.c:9646: warning: Function parameter or member 'pdev' not described in 'qla4xxx_pci_mmio_enabled'

Link: https://lore.kernel.org/r/20200721164148.2617584-27-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Staticify 'pm80xx_pci_mem_copy' and 'mpi_set_phy_profile_req'

These are not invoked externally.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm80xx_hwi.c:69:6: warning: no previous prototype for ‘pm80xx_pci_mem_copy’ [-Wmissing-prototypes]
 69 | void pm80xx_pci_mem_copy(struct pm8001_hba_info *pm8001_ha, u32 soffset,
 | ^~~~~~~~~~~~~~~~~~~
 drivers/scsi/pm8001/pm80xx_hwi.c:5016:6: warning: no previous prototype for ‘mpi_set_phy_profile_req’ [-Wmissing-prototypes]
 5016 | void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
 | ^~~~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-26-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix-up around 120 documentation issues

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_sli.c:257: warning: Function parameter or member 'mqe' not described in 'lpfc_sli4_mq_put'
 drivers/scsi/lpfc/lpfc_sli.c:257: warning: Excess function parameter 'wqe' description in 'lpfc_sli4_mq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Function parameter or member 'hq' not described in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Function parameter or member 'dq' not described in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Function parameter or member 'hrqe' not described in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Function parameter or member 'drqe' not described in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Excess function parameter 'q' description in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:675: warning: Excess function parameter 'wqe' description in 'lpfc_sli4_rq_put'
 drivers/scsi/lpfc/lpfc_sli.c:738: warning: Function parameter or member 'hq' not described in 'lpfc_sli4_rq_release'
 drivers/scsi/lpfc/lpfc_sli.c:738: warning: Function parameter or member 'dq' not described in 'lpfc_sli4_rq_release'
 drivers/scsi/lpfc/lpfc_sli.c:738: warning: Excess function parameter 'q' description in 'lpfc_sli4_rq_release'
 drivers/scsi/lpfc/lpfc_sli.c:1021: warning: Function parameter or member 'xritag' not described in 'lpfc_test_rrq_active'
 drivers/scsi/lpfc/lpfc_sli.c:1132: warning: Function parameter or member 'piocbq' not described in '__lpfc_sli_get_els_sglq'
 drivers/scsi/lpfc/lpfc_sli.c:1132: warning: Excess function parameter 'piocb' description in '__lpfc_sli_get_els_sglq'
 drivers/scsi/lpfc/lpfc_sli.c:1207: warning: Function parameter or member 'piocbq' not described in '__lpfc_sli_get_nvmet_sglq'
 drivers/scsi/lpfc/lpfc_sli.c:1207: warning: Excess function parameter 'piocb' description in '__lpfc_sli_get_nvmet_sglq'
 drivers/scsi/lpfc/lpfc_sli.c:2243: warning: Function parameter or member 'rb_list' not described in 'lpfc_sli_hbqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:2243: warning: Excess function parameter 'phba' description in 'lpfc_sli_hbqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:2243: warning: Excess function parameter 'hbqno' description in 'lpfc_sli_hbqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:2262: warning: Function parameter or member 'hrq' not described in 'lpfc_sli_rqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:2262: warning: Excess function parameter 'hbqno' description in 'lpfc_sli_rqbuf_get'
 drivers/scsi/lpfc/lpfc_sli.c:3429: warning: Function parameter or member 't' not described in 'lpfc_poll_eratt'
 drivers/scsi/lpfc/lpfc_sli.c:3429: warning: Excess function parameter 'ptr' description in 'lpfc_poll_eratt'
 drivers/scsi/lpfc/lpfc_sli.c:4115: warning: Excess function parameter 'pring' description in 'lpfc_sli_abort_fcp_rings'
 drivers/scsi/lpfc/lpfc_sli.c:5331: warning: Excess function parameter 'mboxq' description in 'lpfc_sli4_read_fcoe_params'
 drivers/scsi/lpfc/lpfc_sli.c:5879: warning: Function parameter or member 'extnt_cnt' not described in 'lpfc_sli4_cfg_post_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:5879: warning: Function parameter or member 'type' not described in 'lpfc_sli4_cfg_post_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:5879: warning: Function parameter or member 'emb' not described in 'lpfc_sli4_cfg_post_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:5879: warning: Function parameter or member 'mbox' not described in 'lpfc_sli4_cfg_post_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:6459: warning: Function parameter or member 'pmb' not described in 'lpfc_sli4_ras_mbox_cmpl'
 drivers/scsi/lpfc/lpfc_sli.c:6459: warning: Excess function parameter 'pmboxq' description in 'lpfc_sli4_ras_mbox_cmpl'
 drivers/scsi/lpfc/lpfc_sli.c:6912: warning: Function parameter or member 'extnt_cnt' not described in 'lpfc_sli4_get_allocated_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:6912: warning: Excess function parameter 'extnt_count' description in 'lpfc_sli4_get_allocated_extnts'
 drivers/scsi/lpfc/lpfc_sli.c:7064: warning: Excess function parameter 'pring' description in 'lpfc_sli4_repost_sgl_list'
 drivers/scsi/lpfc/lpfc_sli.c:7312: warning: Function parameter or member 'phba' not described in 'lpfc_init_idle_stat_hb'
 drivers/scsi/lpfc/lpfc_sli.c:8022: warning: Function parameter or member 't' not described in 'lpfc_mbox_timeout'
 drivers/scsi/lpfc/lpfc_sli.c:8022: warning: Excess function parameter 'ptr' description in 'lpfc_mbox_timeout'
 drivers/scsi/lpfc/lpfc_sli.c:8902: warning: Function parameter or member 'mboxq' not described in 'lpfc_sli_issue_mbox_s4'
 drivers/scsi/lpfc/lpfc_sli.c:8902: warning: Excess function parameter 'pmbox' description in 'lpfc_sli_issue_mbox_s4'
 drivers/scsi/lpfc/lpfc_sli.c:9413: warning: Function parameter or member 'piocbq' not described in 'lpfc_sli4_bpl2sgl'
 drivers/scsi/lpfc/lpfc_sli.c:9413: warning: Excess function parameter 'piocb' description in 'lpfc_sli4_bpl2sgl'
 drivers/scsi/lpfc/lpfc_sli.c:9518: warning: Function parameter or member 'iocbq' not described in 'lpfc_sli4_iocb2wqe'
 drivers/scsi/lpfc/lpfc_sli.c:9518: warning: Excess function parameter 'piocb' description in 'lpfc_sli4_iocb2wqe'
 drivers/scsi/lpfc/lpfc_sli.c:10212: warning: Function parameter or member 'phba' not described in '__lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10212: warning: Function parameter or member 'ring_number' not described in '__lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10212: warning: Function parameter or member 'piocb' not described in '__lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10212: warning: Function parameter or member 'flag' not described in '__lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10300: warning: Function parameter or member 'ring_number' not described in 'lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:10300: warning: Excess function parameter 'pring' description in 'lpfc_sli_issue_iocb'
 drivers/scsi/lpfc/lpfc_sli.c:11807: warning: Function parameter or member 'cmd' not described in 'lpfc_sli_abort_taskmgmt'
 drivers/scsi/lpfc/lpfc_sli.c:11807: warning: Excess function parameter 'taskmgmt_cmd' description in 'lpfc_sli_abort_taskmgmt'
 drivers/scsi/lpfc/lpfc_sli.c:12067: warning: Function parameter or member 'ring_number' not described in 'lpfc_sli_issue_iocb_wait'
 drivers/scsi/lpfc/lpfc_sli.c:12067: warning: Excess function parameter 'pring' description in 'lpfc_sli_issue_iocb_wait'
 drivers/scsi/lpfc/lpfc_sli.c:12262: warning: Function parameter or member 'mbx_action' not described in 'lpfc_sli_mbox_sys_shutdown'
 drivers/scsi/lpfc/lpfc_sli.c:13219: warning: Function parameter or member 'irspiocbq' not described in 'lpfc_sli4_els_wcqe_to_rspiocbq'
 drivers/scsi/lpfc/lpfc_sli.c:13219: warning: Excess function parameter 'wcqe' description in 'lpfc_sli4_els_wcqe_to_rspiocbq'
 drivers/scsi/lpfc/lpfc_sli.c:13285: warning: Function parameter or member 'mcqe' not described in 'lpfc_sli4_sp_handle_async_event'
 drivers/scsi/lpfc/lpfc_sli.c:13285: warning: Excess function parameter 'cqe' description in 'lpfc_sli4_sp_handle_async_event'
 drivers/scsi/lpfc/lpfc_sli.c:13318: warning: Function parameter or member 'mcqe' not described in 'lpfc_sli4_sp_handle_mbox_event'
 drivers/scsi/lpfc/lpfc_sli.c:13318: warning: Excess function parameter 'cqe' description in 'lpfc_sli4_sp_handle_mbox_event'
 drivers/scsi/lpfc/lpfc_sli.c:13441: warning: Function parameter or member 'cq' not described in 'lpfc_sli4_sp_handle_mcqe'
 drivers/scsi/lpfc/lpfc_sli.c:13768: warning: Function parameter or member 'speq' not described in 'lpfc_sli4_sp_handle_eqe'
 drivers/scsi/lpfc/lpfc_sli.c:14126: warning: Function parameter or member 'cq' not described in 'lpfc_sli4_nvmet_handle_rcqe'
 drivers/scsi/lpfc/lpfc_sli.c:14235: warning: Function parameter or member 'cqe' not described in 'lpfc_sli4_fp_handle_cqe'
 drivers/scsi/lpfc/lpfc_sli.c:14235: warning: Excess function parameter 'eqe' description in 'lpfc_sli4_fp_handle_cqe'
 drivers/scsi/lpfc/lpfc_sli.c:14336: warning: Function parameter or member 'eq' not described in 'lpfc_sli4_hba_handle_eqe'
 drivers/scsi/lpfc/lpfc_sli.c:14808: warning: Function parameter or member 'entry_count' not described in 'lpfc_sli4_queue_alloc'
 drivers/scsi/lpfc/lpfc_sli.c:15185: warning: Function parameter or member 'type' not described in 'lpfc_cq_create'
 drivers/scsi/lpfc/lpfc_sli.c:15185: warning: Function parameter or member 'subtype' not described in 'lpfc_cq_create'
 drivers/scsi/lpfc/lpfc_sli.c:15333: warning: Function parameter or member 'type' not described in 'lpfc_cq_create_set'
 drivers/scsi/lpfc/lpfc_sli.c:15333: warning: Function parameter or member 'subtype' not described in 'lpfc_cq_create_set'
 drivers/scsi/lpfc/lpfc_sli.c:16063: warning: Function parameter or member 'subtype' not described in 'lpfc_rq_create'
 drivers/scsi/lpfc/lpfc_sli.c:16353: warning: Function parameter or member 'subtype' not described in 'lpfc_mrq_create'
 drivers/scsi/lpfc/lpfc_sli.c:16533: warning: Function parameter or member 'phba' not described in 'lpfc_eq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16590: warning: Function parameter or member 'phba' not described in 'lpfc_cq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16644: warning: Function parameter or member 'phba' not described in 'lpfc_mq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16644: warning: Function parameter or member 'mq' not described in 'lpfc_mq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16644: warning: Excess function parameter 'qm' description in 'lpfc_mq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16698: warning: Function parameter or member 'phba' not described in 'lpfc_wq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16754: warning: Function parameter or member 'phba' not described in 'lpfc_rq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16754: warning: Function parameter or member 'hrq' not described in 'lpfc_rq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16754: warning: Function parameter or member 'drq' not described in 'lpfc_rq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16754: warning: Excess function parameter 'rq' description in 'lpfc_rq_destroy'
 drivers/scsi/lpfc/lpfc_sli.c:16940: warning: Function parameter or member 'xri' not described in '__lpfc_sli4_free_xri'
 drivers/scsi/lpfc/lpfc_sli.c:16955: warning: Function parameter or member 'xri' not described in 'lpfc_sli4_free_xri'
 drivers/scsi/lpfc/lpfc_sli.c:17002: warning: Function parameter or member 'post_cnt' not described in 'lpfc_sli4_post_sgl_list'
 drivers/scsi/lpfc/lpfc_sli.c:17002: warning: Excess function parameter 'count' description in 'lpfc_sli4_post_sgl_list'
 drivers/scsi/lpfc/lpfc_sli.c:17221: warning: Function parameter or member 'sb_count' not described in 'lpfc_sli4_post_io_sgl_list'
 drivers/scsi/lpfc/lpfc_sli.c:17451: warning: Function parameter or member 'did' not described in 'lpfc_fc_frame_to_vport'
 drivers/scsi/lpfc/lpfc_sli.c:17590: warning: Function parameter or member 'vport' not described in 'lpfc_fc_frame_add'
 drivers/scsi/lpfc/lpfc_sli.c:17817: warning: Function parameter or member 'vport' not described in 'lpfc_sli4_seq_abort_rsp'
 drivers/scsi/lpfc/lpfc_sli.c:17817: warning: Function parameter or member 'aborted' not described in 'lpfc_sli4_seq_abort_rsp'
 drivers/scsi/lpfc/lpfc_sli.c:17817: warning: Excess function parameter 'phba' description in 'lpfc_sli4_seq_abort_rsp'
 drivers/scsi/lpfc/lpfc_sli.c:18060: warning: Function parameter or member 'seq_dmabuf' not described in 'lpfc_prep_seq'
 drivers/scsi/lpfc/lpfc_sli.c:18060: warning: Excess function parameter 'dmabuf' description in 'lpfc_prep_seq'
 drivers/scsi/lpfc/lpfc_sli.c:18332: warning: Function parameter or member 'dmabuf' not described in 'lpfc_sli4_handle_received_buffer'
 drivers/scsi/lpfc/lpfc_sli.c:18655: warning: Function parameter or member 'rpi' not described in '__lpfc_sli4_free_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18683: warning: Function parameter or member 'rpi' not described in 'lpfc_sli4_free_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18714: warning: Function parameter or member 'ndlp' not described in 'lpfc_sli4_resume_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18714: warning: Function parameter or member 'cmpl' not described in 'lpfc_sli4_resume_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18714: warning: Function parameter or member 'arg' not described in 'lpfc_sli4_resume_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:18714: warning: Excess function parameter 'phba' description in 'lpfc_sli4_resume_rpi'
 drivers/scsi/lpfc/lpfc_sli.c:19103: warning: Function parameter or member 'phba' not described in 'lpfc_check_next_fcf_pri_level'
 drivers/scsi/lpfc/lpfc_sli.c:19266: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_rr_index_set'
 drivers/scsi/lpfc/lpfc_sli.c:19295: warning: Function parameter or member 'fcf_index' not described in 'lpfc_sli4_fcf_rr_index_clear'
 drivers/scsi/lpfc/lpfc_sli.c:19331: warning: Function parameter or member 'mbox' not described in 'lpfc_mbx_cmpl_redisc_fcf_table'
 drivers/scsi/lpfc/lpfc_sli.c:20027: warning: Function parameter or member 'pwqeq' not described in 'lpfc_wqe_bpl2sgl'
 drivers/scsi/lpfc/lpfc_sli.c:20027: warning: Excess function parameter 'pwqe' description in 'lpfc_wqe_bpl2sgl'
 drivers/scsi/lpfc/lpfc_sli.c:20141: warning: Function parameter or member 'qp' not described in 'lpfc_sli4_issue_wqe'
 drivers/scsi/lpfc/lpfc_sli.c:20141: warning: Excess function parameter 'ring_number' description in 'lpfc_sli4_issue_wqe'
 drivers/scsi/lpfc/lpfc_sli.c:20434: warning: Function parameter or member 'qp' not described in '_lpfc_move_xri_pbl_to_pvt'
 drivers/scsi/lpfc/lpfc_sli.c:20552: warning: Function parameter or member 'hwqid' not described in 'lpfc_keep_pvt_pool_above_lowwm'
 drivers/scsi/lpfc/lpfc_sli.c:20552: warning: Excess function parameter 'qp' description in 'lpfc_keep_pvt_pool_above_lowwm'
 drivers/scsi/lpfc/lpfc_sli.c:20682: warning: Function parameter or member 'qp' not described in 'lpfc_get_io_buf_from_private_pool'

Link: https://lore.kernel.org/r/20200721164148.2617584-24-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Fix incorrectly named function parameter

Fixes the following W=1 kernel build warning(s):

from  drivers/scsi/qla4xxx/ql4_iocb.c:8:
 drivers/scsi/qla4xxx/ql4_iocb.c:87: warning: Function parameter or member 'mrkr_mod' not described in 'qla4xxx_send_marker_iocb'
 drivers/scsi/qla4xxx/ql4_iocb.c:87: warning: Excess function parameter 'marker_type' description in 'qla4xxx_send_marker_iocb'

Link: https://lore.kernel.org/r/20200721164148.2617584-23-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Fix-up incorrectly documented parameter

Also demote incomplete header from kerneldoc.

Fixes the following W=1 kernel build warning(s):

from  drivers/scsi/qla4xxx/ql4_mbx.c:9:
 drivers/scsi/qla4xxx/ql4_mbx.c:53: warning: Excess function parameter 'ret' description in 'qla4xxx_is_intr_poll_mode'
 drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'fw_ddb_entry_dma' not described in 'qla4xxx_get_fwddb_entry'
 drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'conn_err_detail' not described in 'qla4xxx_get_fwddb_entry'
 drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'tcp_source_port_num' not described in 'qla4xxx_get_fwddb_entry'
 drivers/scsi/qla4xxx/ql4_mbx.c:832: warning: Function parameter or member 'connection_id' not described in 'qla4xxx_get_fwddb_entry'
 drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Function parameter or member 'ddb_entry' not described in 'qla4xxx_reset_target'
 drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Excess function parameter 'db_entry' description in 'qla4xxx_reset_target'
 drivers/scsi/qla4xxx/ql4_mbx.c:1271: warning: Excess function parameter 'un_entry' description in 'qla4xxx_reset_target'

Link: https://lore.kernel.org/r/20200721164148.2617584-22-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Remove unused variable 'pg_addr'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_sli.c: In function ‘lpfc_wq_create’:
 drivers/scsi/lpfc/lpfc_sli.c:15810:16: warning: variable ‘pg_addr’ set but not used [-Wunused-but-set-variable]
 15810 | unsigned long pg_addr;
 | ^~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-21-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Move 'qla4_82xx_reg_tbl' to the only place its used

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/qla4xxx/ql4_def.h:43,
 from drivers/scsi/qla4xxx/ql4_mbx.c:9:
 drivers/scsi/qla4xxx/ql4_nx.h:602:23: warning: ‘qla4_82xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
 602 | static const uint32_t qla4_82xx_reg_tbl[] = {
 | ^~~~~~~~~~~~~~~~~
 [...]
 NB: Lots of these

Link: https://lore.kernel.org/r/20200721164148.2617584-20-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove a bunch of set but unused variables

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_eh_cmd_timed_out’:
 drivers/scsi/qla4xxx/ql4_os.c:1865:24: warning: variable ‘sess’ set but not used [-Wunused-but-set-variable]
 1865 | struct iscsi_session *sess;
 | ^~~~
 drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_session_create’:
 drivers/scsi/qla4xxx/ql4_os.c:3079:19: warning: variable ‘dst_addr’ set but not used [-Wunused-but-set-variable]
 3079 | struct sockaddr *dst_addr;
 | ^~~~~~~~
 drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4_8xxx_iospace_config’:
 drivers/scsi/qla4xxx/ql4_os.c:5512:44: warning: variable ‘db_len’ set but not used [-Wunused-but-set-variable]
 5512 | unsigned long mem_base, mem_len, db_base, db_len;
 | ^~~~~~
 drivers/scsi/qla4xxx/ql4_os.c:5512:35: warning: variable ‘db_base’ set but not used [-Wunused-but-set-variable]
 5512 | unsigned long mem_base, mem_len, db_base, db_len;
 | ^~~~~~~
 drivers/scsi/qla4xxx/ql4_os.c: In function ‘qla4xxx_get_param_ddb’:
 drivers/scsi/qla4xxx/ql4_os.c:6269:24: warning: variable ‘ha’ set but not used [-Wunused-but-set-variable]
 6269 | struct scsi_qla_host *ha;
 | ^~

Link: https://lore.kernel.org/r/20200721164148.2617584-19-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix some function documentation issues

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm80xx_hwi.c:918: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table'
 drivers/scsi/pm8001/pm80xx_hwi.c:954: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table'
 drivers/scsi/pm8001/pm80xx_hwi.c:1717: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_enable'
 drivers/scsi/pm8001/pm80xx_hwi.c:1735: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_disable'
 drivers/scsi/pm8001/pm80xx_hwi.c:4830: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_start_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4872: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_stop_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_ha' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_dev' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'flag' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phyId' not described in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phy_op' not described in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'phy_id' description in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_isr'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'irq' description in 'pm80xx_chip_isr'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'stat' description in 'pm80xx_chip_isr'

Link: https://lore.kernel.org/r/20200721164148.2617584-18-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix a bunch of kerneldoc issues

Provide lots of missing descriptions, remove some superfluous ones
(probably due to docrot) and demote one header which does not provide many
descriptions, and the ones it does provide are incorrect.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm8001_hwi.c:339: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table'
 drivers/scsi/pm8001/pm8001_hwi.c:360: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table'
 drivers/scsi/pm8001/pm8001_hwi.c:480: warning: Function parameter or member 'interval' not described in 'mpi_set_open_retry_interval_reg'
 drivers/scsi/pm8001/pm8001_hwi.c:1238: warning: Function parameter or member 'int_vec_idx' not described in 'pm8001_chip_msix_interrupt_enable'
 drivers/scsi/pm8001/pm8001_hwi.c:1256: warning: Function parameter or member 'int_vec_idx' not described in 'pm8001_chip_msix_interrupt_disable'
 drivers/scsi/pm8001/pm8001_hwi.c:1270: warning: Function parameter or member 'vec' not described in 'pm8001_chip_interrupt_enable'
 drivers/scsi/pm8001/pm8001_hwi.c:1284: warning: Function parameter or member 'vec' not described in 'pm8001_chip_interrupt_disable'
 drivers/scsi/pm8001/pm8001_hwi.c:4508: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_start_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4544: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_stop_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'pm8001_dev' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'flag' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4624: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_dereg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4624: warning: Function parameter or member 'device_id' not described in 'pm8001_chip_dereg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Function parameter or member 'phyId' not described in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Function parameter or member 'phy_op' not described in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Excess function parameter 'phy_id' description in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Function parameter or member 'vec' not described in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Excess function parameter 'irq' description in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Excess function parameter 'stat' description in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'pm8001_dev' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'task_tag' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'cmd_tag' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Excess function parameter 'task' description in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4966: warning: Function parameter or member 'tag' not described in 'pm8001_chip_fw_flash_update_build'

Link: https://lore.kernel.org/r/20200721164148.2617584-17-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aic7xxx: Remove set but unused variables 'targ_info' and 'value'

Also remove 'tstate' which became unused after this patch.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic7xxx/aic79xx_core.c: In function ‘ahd_handle_seqint’:
 drivers/scsi/aic7xxx/aic79xx_core.c:1907:32: warning: variable ‘targ_info’ set but not used [-Wunused-but-set-variable]
 1907 | struct ahd_initiator_tinfo *targ_info;
 | ^~~~~~~~~
 drivers/scsi/pm8001/pm8001_hwi.c: In function ‘mpi_set_phys_g3_with_ssc’:
 drivers/scsi/pm8001/pm8001_hwi.c:413:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable]
 413 | u32 value, offset, i;
 | ^~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-16-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Move 'qla4_83xx_reg_tbl' from shared header

'qla4_83xx_reg_tbl' is only used in 'drivers/scsi/qla4xxx/ql4_os.c', move
it there.

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/qla4xxx/ql4_def.h:46,
 from drivers/scsi/qla4xxx/ql4_init.c:9:
 At top level:
 drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
 90 | static const uint32_t qla4_83xx_reg_tbl[] = {
 | ^~~~~~~~~~~~~~~~~
 In file included from drivers/scsi/qla4xxx/ql4_def.h:46,
 from drivers/scsi/qla4xxx/ql4_mbx.c:9:
 drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
 90 | static const uint32_t qla4_83xx_reg_tbl[] = {
 | ^~~~~~~~~~~~~~~~~
 [...]
 NB: Lots of these - snipped for brevity.

Link: https://lore.kernel.org/r/20200721164148.2617584-15-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Check return value of pci_set_mwi()

pci_set_mwi() has 'warn_unused_result' so the result should be checked.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
 drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]

And if 'status' is removed:

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
 drivers/scsi/qla4xxx/ql4_init.c:666:2: warning: ignoring return value of ‘pci_set_mwi’, declared with attribute warn_unused_result [-Wunused-result]
 666 | pci_set_mwi(ha->pdev);
 | ^~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-14-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Remove set but unused variable 'func_number'

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’:
 drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200721164148.2617584-13-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Add descriptions for unused 'attr' function parameters

Clean-up some whitespace issues too whilst we're here.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm8001_ctl.c:102: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show'
 drivers/scsi/pm8001/pm8001_ctl.c:331: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show'
 drivers/scsi/pm8001/pm8001_ctl.c:400: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show'
 drivers/scsi/pm8001/pm8001_ctl.c:433: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show'
 drivers/scsi/pm8001/pm8001_ctl.c:464: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show'
 drivers/scsi/pm8001/pm8001_ctl.c:623: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show'

Link: https://lore.kernel.org/r/20200721164148.2617584-12-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Move function header and supply some missing parameter descriptions

Functions must follow directly after the header that documents them.

Fixes the following W=1 kernel build warning(s):

from  drivers/scsi/pm8001/pm8001_sas.c:41:
inlined from ‘pm8001_issue_ssp_tmf’ at  drivers/scsi/pm8001/pm8001_sas.c:919:2:
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Function parameter or member 'pm8001_dev' not described in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'task' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'num' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'gfp_flags' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'is_tmf' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'tmf' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:583: warning: Function parameter or member 'device_id' not described in 'pm8001_find_dev'
 drivers/scsi/pm8001/pm8001_sas.c:1000: warning: Function parameter or member 'dev' not described in 'pm8001_I_T_nexus_reset'

Link: https://lore.kernel.org/r/20200721164148.2617584-11-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aic94xx: Fix kerneldoc formatting issue with 'task'

Kerneldoc expects attributes/parameters to be in '@*.: ' format.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic94xx/aic94xx_tmf.c:685: warning: Function parameter or member 'task' not described in 'asd_query_task'

Link: https://lore.kernel.org/r/20200721164148.2617584-9-lee.jones@linaro.org
Cc: Luben Tuikov <luben_tuikov@adaptec.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Add descriptions for missing parameters

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p2' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p3' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p4' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p5' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p6' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'status' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r1' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r2' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r3' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r4' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Excess function parameter 'ret' description in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:609: warning: Function parameter or member 'dev' not described in 'aac_src_ioremap'
 drivers/scsi/aacraid/src.c:639: warning: Function parameter or member 'dev' not described in 'aac_srcv_ioremap'

Link: https://lore.kernel.org/r/20200721164148.2617584-8-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>