Florian Fainelli [Thu, 18 Jan 2018 23:12:21 +0000 (15:12 -0800)]
net: stmmac: Fix reception of Broadcom switches tags
Broadcom tags inserted by Broadcom switches put a 4 byte header after
the MAC SA and before the EtherType, which may look like some sort of 0
length LLC/SNAP packet (tcpdump and wireshark do think that way). With
ACS enabled in stmmac the packets were truncated to 8 bytes on
reception, whereas clearing this bit allowed normal reception to occur.
In order to make that possible, we need to pass a net_device argument to
the different core_init() functions and we are dependent on the Broadcom
tagger padding packets correctly (which it now does). To be as little
invasive as possible, this is only done for gmac1000 when the network
device is DSA-enabled (netdev_uses_dsa() returns true).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Jan 2018 21:05:50 +0000 (16:05 -0500)]
Merge branch 'hns3-new-features'
Peng Li says:
====================
add some features to hns3 driver
This patchset adds some features to hns3 driver, include the support
for ethtool command -d, -p and support for manager table.
[Patch 1/4] adds support for ethtool command -d, its ops is get_regs.
driver will send command to command queue, and get regs number and
regs value from command queue.
[Patch 2/4] adds manager table initialization for hardware.
[Patch 3/4] adds support for ethtool command -p. For fiber ports, driver
sends command to command queue, and IMP will write SGPIO regs to control
leds.
[Patch 4/4] adds support for net status led for fiber ports. Net status
include port speed, total rx/tx packets and link status. Driver send
the status to command queue, and IMP will write SGPIO to control leds.
---
Change log:
V1 -> V2:
1, fix comments from Andrew Lunn, remove the patch "net: hns3: add
ethtool -p support for phy device".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 19 Jan 2018 06:41:12 +0000 (14:41 +0800)]
net: hns3: add net status led support for fiber port
Check the net status per second, include port speed, total rx/tx packets
and link status. Updating the led status for fiber port.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 19 Jan 2018 06:41:11 +0000 (14:41 +0800)]
net: hns3: add ethtool -p support for fiber port
Add led location support for fiber port. The led will keep blinking
when locating.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fuyun Liang [Fri, 19 Jan 2018 06:41:10 +0000 (14:41 +0800)]
net: hns3: add manager table initialization for hardware
The manager table is empty by default. If it is not initialized, the
management pkgs like LLDP will be dropped by hardware. Default entries
need to be added to manager table.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fuyun Liang [Fri, 19 Jan 2018 06:41:09 +0000 (14:41 +0800)]
net: hns3: add support for get_regs
This patch adds get_regs support for ethtool cmd.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Decotigny [Thu, 18 Jan 2018 17:59:13 +0000 (09:59 -0800)]
net: core: Expose number of link up/down transitions
Expose the number of times the link has been going UP or DOWN, and
update the "carrier_changes" counter to be the sum of these two events.
While at it, also update the sysfs-class-net documentation to cover:
carrier_changes (3.15), carrier_up_count (4.16) and carrier_down_count
(4.16)
Signed-off-by: David Decotigny <decot@googlers.com>
[Florian:
* rebase
* add documentation
* merge carrier_changes with up/down counters]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Thu, 18 Jan 2018 16:48:18 +0000 (17:48 +0100)]
macsec: restore uAPI after addition of GCM-AES-256
Commit
ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite")
changed a few values in the uapi headers for MACsec.
Because of existing userspace implementations, we need to preserve the
value of MACSEC_DEFAULT_CIPHER_ID. Not doing that resulted in
wpa_supplicant segfaults when a secure channel was created using the
default cipher. Thus, swap MACSEC_DEFAULT_CIPHER_{ID,ALT} back to their
original values.
Changing the maximum length of the MACSEC_SA_ATTR_KEY attribute is
unnecessary, as the previous value (MACSEC_MAX_KEY_LEN, which was 128B)
is large enough to carry 32-bytes keys. This patch reverts
MACSEC_MAX_KEY_LEN to 128B and restores the old length check on
MACSEC_SA_ATTR_KEY.
Fixes:
ccfdec908922 ("macsec: Add support for GCM-AES-256 cipher suite")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Thu, 18 Jan 2018 02:37:34 +0000 (10:37 +0800)]
net: hns: Fix for variable may be used uninitialized warnings
When !CONFIG_REGMAP hns throws compiler warnings since
dsaf_read_syscon ignores the return result from regmap_read,
which allows val to be uninitialized.
Fixes:
86897c960b49 ("net: hns: add syscon operation for dsaf")
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lucas Stach [Wed, 17 Jan 2018 18:30:55 +0000 (19:30 +0100)]
net: fec: add necessary defines to work on ARM64
The i.MX8 is a ARMv8 based SoC, that uses the same FEC IP as the
earlier, ARMv7 based, i.MX SoCs. Allow the driver to work on ARM64.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toshiaki Makita [Wed, 17 Jan 2018 06:38:25 +0000 (15:38 +0900)]
virtio_net: Add ethtool stats
The main purpose of this patch is adding a way of checking per-queue stats.
It's useful to debug performance problems on multiqueue environment.
$ ethtool -S ens10
NIC statistics:
rx_queue_0_packets: 2090408
rx_queue_0_bytes:
3164825094
rx_queue_1_packets: 2082531
rx_queue_1_bytes:
3152932314
tx_queue_0_packets: 2770841
tx_queue_0_bytes:
4194955474
tx_queue_1_packets: 3084697
tx_queue_1_bytes:
4670196372
This change converts existing per-cpu stats structure into per-queue one.
This should not impact on performance since each queue counter is not
updated concurrently by multiple cpus.
Performance numbers:
- Guest has 2 vcpus and 2 queues
- Guest runs netserver
- Host runs 100-flow super_netperf
Before After Diff
UDP_STREAM 18byte 86.22 87.00 +0.90%
UDP_STREAM 1472byte 4055.27 4042.18 -0.32%
TCP_STREAM 16956.32 16890.63 -0.39%
UDP_RR 178667.11 185862.70 +4.03%
TCP_RR 128473.04 124985.81 -2.71%
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Jan 2018 15:57:05 +0000 (10:57 -0500)]
Merge branch 'mvpp2-Armada-7k-8k-PP2-ACPI-support'
Marcin Wojtas says:
====================
Armada 7k/8k PP2 ACPI support
I quickly resend the series, thanks to Antoine Tenart's remark,
who spotted !CONFIG_ACPI compilation issue after introducing
the new fwnode_irq_get() routine. Please see the details in the changelog
below and the 3/7 commit log.
mvpp2 driver can work with the ACPI representation, as exposed
on a public branch:
https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/commits/marvell-armada-wip
It was compiled together with the most recent Tianocore EDK2 revision.
Please refer to the firmware build instruction on MacchiatoBin board:
http://wiki.macchiatobin.net/tiki-index.php?page=Build+from+source+-+UEFI+EDK+II
ACPI representation of PP2 controllers (withouth PHY support) can
be viewed in the github:
* MacchiatoBin:
https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/blob/
71ae395da1661374b0f07d1602afb1eee56e9794/Platforms/Marvell/Armada/AcpiTables/Armada80x0McBin/Dsdt.asl#L201
* Armada 7040 DB:
https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/blob/
71ae395da1661374b0f07d1602afb1eee56e9794/Platforms/Marvell/Armada/AcpiTables/Armada70x0/Dsdt.asl#L131
I will appreciate any comments or remarks.
Best regards,
Marcin
Changelog:
v3 -> v4:
* 3/7
- add new macro (ACPI_HANDLE_FWNODE) and fix
compilation with !CONFIG_ACPI
- extend commit log and mention usability of fwnode_irq_get
for the child nodes as well
v2 -> v3:
* 1/7, 2/7
- Add Rafael's Acked-by's
* 3/7, 4/7
- New patches
* 6/7, 7/7
- Update driver with new helper routines usage
- Improve commit log.
v1 -> v2:
* Remove MDIO patches
* Use PP2 ports only with link interrupts
* Release second region resources in mvpp2 driver (code moved from
mvmdio), as explained in details in 5/5 commit message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas [Thu, 18 Jan 2018 12:31:44 +0000 (13:31 +0100)]
net: mvpp2: enable ACPI support in the driver
This patch introduces an alternative way of obtaining resources - via
ACPI tables provided by firmware. Enabling coexistence with the DT
support, in addition to the OF_*->device_*/fwnode_* API replacement,
required following steps to be taken:
* Add mvpp2_acpi_match table
* Omit clock configuration and obtain tclk from the property - in ACPI
world, the firmware is responsible for clock maintenance.
* Disable comphy and syscon handling as they are not available for ACPI.
* Modify way of obtaining interrupts - use newly introduced
fwnode_irq_get() routine
* Until proper MDIO bus and PHY handling with ACPI is established in the
kernel, use only link interrupts feature in the driver. For the RGMII
port it results in depending on GMAC settings done during firmware
stage.
* When booting with ACPI MVPP2_QDIST_MULTI_MODE is picked by
default, as there is no need to keep any kind of the backward
compatibility.
Moreover, a memory region used by mvmdio driver is usually placed in
the middle of the address space of the PP2 network controller.
The MDIO base address is obtained without requesting memory region
(by devm_ioremap() call) in mvmdio.c, later overlapping resources are
requested by the network driver, which is responsible for avoiding
a concurrent access.
In case the MDIO memory region is declared in the ACPI, it can
already appear as 'in-use' in the OS. Because it is overlapped by second
region of the network controller, make sure it is released, before
requesting it again. The care is taken by mvpp2 driver to avoid
concurrent access to this memory region.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas [Thu, 18 Jan 2018 12:31:43 +0000 (13:31 +0100)]
net: mvpp2: use device_*/fwnode_* APIs instead of of_*
OF functions can be used only for the driver using DT.
As a preparation for introducing ACPI support in mvpp2
driver, use struct fwnode_handle in order to obtain
properties from the hardware description.
This patch replaces of_* function with device_*/fwnode_*
where possible in the mvpp2.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas [Thu, 18 Jan 2018 12:31:42 +0000 (13:31 +0100)]
net: mvpp2: simplify maintaining enabled ports' list
'port_count' field of the mvpp2 structure holds an overall amount
of available ports, based on DT nodes status. In order to be prepared
to support other HW description, obtain the value by incrementing it
upon each successful port initialization. This allowed for simplifying
port indexing in the controller's private array, whose size is now not
dynamically allocated, but fixed to MVPP2_MAX_PORTS.
This patch simplifies creating and filling list of enabled ports and
is a part of the preparation for adding ACPI support in the mvpp2 driver.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas [Thu, 18 Jan 2018 12:31:41 +0000 (13:31 +0100)]
device property: Allow iterating over available child fwnodes
Implement a new helper function fwnode_get_next_available_child_node(),
which enables obtaining next enabled child fwnode, which
works on a similar basis to OF's of_get_next_available_child().
This commit also introduces a macro, thanks to which it is
possible to iterate over the available fwnodes, using the
new function described above.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas [Thu, 18 Jan 2018 12:31:40 +0000 (13:31 +0100)]
device property: Introduce fwnode_irq_get()
Until now there were two very similar functions allowing
to get Linux IRQ number from ACPI handle (acpi_irq_get())
and OF node (of_irq_get()). The first one appeared to be used
only as a subroutine of platform_irq_get(), which (in the generic
code) limited IRQ obtaining from _CRS method only to nodes
associated to kernel's struct platform_device.
This patch introduces a new helper routine - fwnode_irq_get(),
which allows to get the IRQ number directly from the fwnode
to be used as common for OF/ACPI worlds. It is usable not
only for the parents fwnodes, but also for the child nodes
comprising their own _CRS methods with interrupts description.
In order to be able o satisfy compilation with !CONFIG_ACPI
and also simplify the new code, introduce a helper macro
(ACPI_HANDLE_FWNODE), with which it is possible to reach
an ACPI handle directly from its fwnode.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas [Thu, 18 Jan 2018 12:31:39 +0000 (13:31 +0100)]
device property: Introduce fwnode_get_phy_mode()
Until now there were two almost identical functions for
obtaining network PHY mode - of_get_phy_mode() and,
more generic, device_get_phy_mode(). However it is not uncommon,
that the network interface is represented as a child
of the actual controller, hence it is not associated
directly to any struct device, required by the latter
routine.
This commit allows for getting the PHY mode for
children nodes in the ACPI world by introducing a new function -
fwnode_get_phy_mode(). This commit also changes
device_get_phy_mode() routine to be its wrapper, in order
to prevent unnecessary duplication.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas [Thu, 18 Jan 2018 12:31:38 +0000 (13:31 +0100)]
device property: Introduce fwnode_get_mac_address()
Until now there were two almost identical functions for
obtaining MAC address - of_get_mac_address() and, more generic,
device_get_mac_address(). However it is not uncommon,
that the network interface is represented as a child
of the actual controller, hence it is not associated
directly to any struct device, required by the latter
routine.
This commit allows for getting the MAC address for
children nodes in the ACPI world by introducing a new function -
fwnode_get_mac_address(). This commit also changes
device_get_mac_address() routine to be its wrapper, in order
to prevent unnecessary duplication.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 22 Jan 2018 15:25:43 +0000 (15:25 +0000)]
net: caif: remove redundant re-assignment of pointer pfrm
The pointer pfrm is initialized and then later re-assigned the same
value and hence the second assignment is redundant and can be removed.
Cleans up clang warning:
drivers/net/caif/caif_hsi.c:222:6: warning: Value stored to 'pfrm'
during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ganesh Goudar [Mon, 22 Jan 2018 13:18:26 +0000 (18:48 +0530)]
cxgb4: add geneve offload support for T6
Add geneve segmentation offload support of T6 cards.
Original work by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Jan 2018 14:36:37 +0000 (09:36 -0500)]
Merge tag 'mac80211-next-for-davem-2018-01-22' of git://git./linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Less than a handful of changes:
* possible memory leak fix in hwsim
* speed up hwsim
* add hwsim userspace rate control API
* code cleanups
====================
A conflict was resolved in mac80211_hwsim.c, mostly of
the simple overlapping changes category. One adding
a rhashtable and another adding a workqueue.
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 22 Jan 2018 10:31:19 +0000 (10:31 +0000)]
devlink: fix memory leak on 'resource'
Currently, if the call to devlink_resource_find returns null then
the error exit path does not free the devlink_resource 'resource'
and a memory leak occurs. Fix this by kfree'ing resource on the
error exit path.
Detected by CoverityScan, CID#1464184 ("Resource leak")
Fixes:
d9f9b9a4d05f ("devlink: Add support for resource abstraction")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 22 Jan 2018 14:22:11 +0000 (09:22 -0500)]
Merge branch 'mlxsw-spectrum_router-Optimize-LPM-trees'
Jiri Pirko says:
====================
mlxsw: spectrum_router: Optimize LPM trees
Ido says:
This set tries to optimize the structure of the LPM trees used for route
lookup by avoiding lookups that are guaranteed not to return a result.
This is done by making sure only used prefix lengths are present in the
tree.
First two patches are small preparatory steps towards the actual change
in the last patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 22 Jan 2018 08:17:42 +0000 (09:17 +0100)]
mlxsw: spectrum_router: Remove unnecessary prefix lengths from LPM tree
In commit
fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for
all virtual routers") I tried to make sure only used prefix lengths are
present in the LPM tree shared between all virtual routers.
However, this optimization had to be removed in commit
a69518cf0b4c
("mlxsw: spectrum_router: Avoid expensive lookup during route removal"),
since determining the used prefix lengths required us to traverse all
the active virtual routers, which could result in a hung task depending
on the number of VRFs and whether routes were removed due to abort or
not.
Re-introduce the optimization by moving the prefix usage accounting from
the virtual routers to the LPM tree, as this accounting is only used in
order to determine the tree's structure.
To make the sharing of the trees more explicit, the two trees (for IPv4
and IPv6) are stored in the shared router struct and upon the creation
of a virtual router it is immediately bound to both.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 22 Jan 2018 08:17:41 +0000 (09:17 +0100)]
mlxsw: spectrum_router: Pass FIB node to LPM tree unlink function
Next patch will try to optimize the LPM tree and make sure only used
prefix lengths are present, to avoid unnecessary look-ups.
Pass the currently removed FIB node to the unlinking function as its
associated prefix length is a potential candidate for removal from the
tree.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 22 Jan 2018 08:17:40 +0000 (09:17 +0100)]
mlxsw: spectrum_router: Use the nodes list as indication for empty FIB
Currently, each FIB (IPv4 / IPv6) in a virtual router holds a prefix
usage that is used to choose a matching LPM tree, but also to check if
the FIB is empty, so that the LPM tree could be unbound.
Next patches will remove the reliance on the per-FIB prefix usage for
LPM tree matching. Keeping it only to check if the FIB is empty is a
waste, since we can use the nodes ({Prefix, Length}) list instead.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Mon, 22 Jan 2018 02:55:38 +0000 (10:55 +0800)]
tun: add missing rcu annotation
This patch fixes the following sparse warnings:
drivers/net/tun.c:2241:15: error: incompatible types in comparison expression (different address spaces)
Fixes:
cd5681d7d890 ("tuntap: rename struct tun_steering_prog to struct tun_prog")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
weiyongjun (A) [Thu, 18 Jan 2018 02:23:34 +0000 (02:23 +0000)]
mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()
'hwname' is malloced in hwsim_new_radio_nl() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.
Fixes:
ff4dd73dd2b4 ("mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Christopher DÃaz Riveros [Wed, 17 Jan 2018 21:03:00 +0000 (16:03 -0500)]
debugfs_sta: Remove unneeded semicolons
Trivial fix removes unneeded semicolons after switch blocks.
Signed-off-by: Christopher DÃaz Riveros <chrisadr@gentoo.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
David S. Miller [Sun, 21 Jan 2018 23:21:31 +0000 (18:21 -0500)]
Merge branch 'mlxsw-Add-support-for-mirror-action-with-flower'
Jiri Pirko says:
====================
mlxsw: Add support for mirror action with flower
Arkadi says:
Add support for mirror action with flower classifier. The first 3 patches
introduce a generic per-block resource infra. The last 4 patches add
support for flow based span.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arkadi Sharshevsky [Fri, 19 Jan 2018 08:24:52 +0000 (09:24 +0100)]
mlxsw: spectrum_acl: Add support for mirror action
Add support for mirror action. Only one mirror action can be set per rule.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arkadi Sharshevsky [Fri, 19 Jan 2018 08:24:51 +0000 (09:24 +0100)]
mlxsw: spectrum: Extend mlxsw_afa_ops for counter index and implement for Spectrum
Introduce extension of mlxsw_afa_ops in order to add/del mirroring and
implement the ops for Spectrum.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arkadi Sharshevsky [Fri, 19 Jan 2018 08:24:50 +0000 (09:24 +0100)]
mlxsw: spectrum: Extend and export SPAN API
Extend SPAN API for ACL case. In case of ACL triggering the MPAR register
shouldn't be configured. This patch also export those helpers for
ACL usage.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arkadi Sharshevsky [Fri, 19 Jan 2018 08:24:49 +0000 (09:24 +0100)]
mlxsw: spectrum_acl: Add support for mirroring action
The patch extends the trap action for mirroring.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 19 Jan 2018 08:24:48 +0000 (09:24 +0100)]
mlxsw: core: Make counter index allocated inside the action append
So far, the caller of mlxsw_afa_block_append_counter needed to allocate
counter index by hand. Benefit from the previously introduced resource
infra and counter_index_get/put callbacks, and allocate the counter
index in place where it is needed, inside the action append function.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 19 Jan 2018 08:24:47 +0000 (09:24 +0100)]
mlxsw: core: Convert fwd_entry_ref list to be generic per-block resource list
Since the resource list needs to be used also for other entries different
to fwd_entry_ref, make the list generic. For that purpose, introduce a
resource structure with couple of helpers that the code which need to
store a per-block resource should use.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 19 Jan 2018 08:24:46 +0000 (09:24 +0100)]
mlxsw: spectrum: Extend mlxsw_afa_ops for counter index and implement for Spectrum
Introduce extension of mlxsw_afa_ops in order to get/put counter indexes
and implement the ops for Spectrum.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 Jan 2018 23:19:04 +0000 (18:19 -0500)]
Merge branch 'Aquantia-atlantic-driver-new-devices-support'
Igor Russkikh says:
====================
Aquantia atlantic driver new devices support
This patchset introduces a support for new Aquantia hardware:
AQC11x family with updated hardware (B1) and firmware (2.x and 3.x branches).
For that, a number of improvements in overall driver model were done:
- Firmware specific ops tables. Firmware 2.x and 3.x series support
functions are now in separate fw2x module.
- PCI module cleanup and simplification done.
- Verified and tested hardware reset process.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:28 +0000 (17:03 +0300)]
net: aquantia: bump driver version to match aquantia internal numbering
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:27 +0000 (17:03 +0300)]
net: aquantia: Report correct mediatype via ethtool
For devices with known capabilities of Fibre media type we now report that
to ethtool.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:26 +0000 (17:03 +0300)]
net: aquantia: Introduce global AQC hardware reset sequence
The detailed reset sequence ensures all HW components are in aligned
state before NIC startup. It also supports cards with signed firmware (RBL)
and checks if their FW is valid.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:25 +0000 (17:03 +0300)]
net: aquantia: Introduce support for new firmware on AQC cards
This defines fw2x operations table and corresponding methods.
Some of the functions are being shared with 1.x firmware
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:24 +0000 (17:03 +0300)]
net: aquantia: Introduce firmware ops callbacks
New AQC cards will have an updated firmware with new binary interface.
This patch extracts firmware specific operations into a separate table
and prepares for the introduction of new fw 2.x and 3.x
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:23 +0000 (17:03 +0300)]
net: aquantia: Change confusing no_ff_addr to more meaningful name
The address to check if HW is not dead/hang could be stored in
capabilities, since it is a constant. Change its name to better reflect
the idea.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:22 +0000 (17:03 +0300)]
net: aquantia: Remove create/destroy from hw ops
These ops are not related to HW and are now implemented in pci module.
Thus, remove these ops pointers and implementation.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:21 +0000 (17:03 +0300)]
net: aquantia: Cleanup pci functions module
Driver contained a dead code of maintaining multiple pci port instances.
That will never be used since for each pci function a separate NIC
instance is created.
Simplify this, making pci module only responsible for pci resource
management.
NIC initialization is also simplified accordingly.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:20 +0000 (17:03 +0300)]
net: aquantia: Convert hw and caps structures to const static pointers
This removes unnecessary structure copying, and prepares the driver for
separate firmware ops table introduction.
We also remove extra copy of capabilities structure (which is const actually)
and also replace it with a const pointer in aq_nic_cfg.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:19 +0000 (17:03 +0300)]
net: aquantia: Introduce new AQC devices and capabilities
A number of new AQC devices is going to be released. To support more
flexible capabilities management a number of static caps instances is now
declared. Devices now are mainly differs by supported speeds, but in future
more parameters will be customized. A set of AQC100 devices have
fibre media, not twisted pair - this is also reflected in
new capabilities definitions.
HW level also now directly exports hw_ops for each of A0/B0 hardware.
PCI configuration now uses a device configuration table where each
device ID is explicitly mapped with hardware OPs and capabilities
structures.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 19 Jan 2018 14:03:18 +0000 (17:03 +0300)]
net: aquantia: Introduce new device ids and constants
New set of aquantia devices has an upgraded hardware (B1).
The hardware interface is identical to B0. The difference will
be in firmware which is incompatible with old one.
Reorganized and removed duplicate speed and devid definitions
Introduced explicit flow control configuration defines
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 Jan 2018 23:13:23 +0000 (18:13 -0500)]
Merge tag 'mlx5-updates-2018-01-19' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2018-01-19
From: Or Gerlitz <ogerlitz@mellanox.com>
=======
First six patches of this series further enhances the mlx5 hairpin support.
The first two patches deal with using different hairpin instances
for flows whose packets have different priorities to align with the port
TX QoS model. The next four patches allow us to do HW spreading
of flows over a set of hairpin pairs using RSS. The last two patches
change the driver to also set the size of the HW hairpin queues.
========
Next four patches from Eran Ben Elisha <eranbe@mellanox.com>:
Add more debug data for TX timeout handling, and further enhance and optimize
TX timeout handling upon lost interrupts, which adds a mechanism for explicitly
polling EQ in case of a TX timeout in order to recover from a lost interrupt.
If this is not the case (no pending EQEs), perform a channels full recovery as
usual.
From Kamal Heib <kamalh@mellanox.com>, Two patches to extend the stats group API
to have an update_stats() callback which will be used to fetch the hardware or
software counters data, this will improve the current API and reduce code
duplication.
From Gal Pressman <galp@mellanox.com>, Last patch, Add likely to the common RX checksum
flow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pieter Jansen van Vuuren [Sat, 20 Jan 2018 01:54:08 +0000 (17:54 -0800)]
nfp: flower: prioritize stats updates
Previously it was possible to interrupt processing stats updates because
they were handled in a work queue. Interrupting the stats updates could
lead to a situation where we backup the control message queue. This patch
moves the stats update processing out of the work queue to be processed as
soon as hardware sends a request.
Reported-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Sun, 21 Jan 2018 13:15:41 +0000 (14:15 +0100)]
net: gemini: Depend on HAS_IOMEM
The zeroday builder notices that since Usermode Linux does not
have IO memory, the build fails for them when selecting everything
it can enable.
As the driver is clearly using memory-mapped registers to access
the network adapter, we add depends on HAS_IOMEM to solve this
problem.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 Jan 2018 16:35:34 +0000 (11:35 -0500)]
Merge git://git./linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree. Basically, a new extension for ip6tables, simplification work of
nf_tables that saves us 500 LoC, allow raw table registration before
defragmentation, conversion of the SNMP helper to use the ASN.1 code
generator, unique 64-bit handle for all nf_tables objects and fixes to
address fallout from previous nf-next batch. More specifically, they
are:
1) Seven patches to remove family abstraction layer (struct nft_af_info)
in nf_tables, this simplifies our codebase and it saves us 64 bytes per
net namespace.
2) Add IPv6 segment routing header matching for ip6tables, from Ahmed
Abdelsalam.
3) Allow to register iptable_raw table before defragmentation, some
people do not want to waste cycles on defragmenting traffic that is
going to be dropped, hence add a new module parameter to enable this
behaviour in iptables and ip6tables. From Subash Abhinov
Kasiviswanathan. This patch needed a couple of follow up patches to
get things tidy from Arnd Bergmann.
4) SNMP helper uses the ASN.1 code generator, from Taehee Yoo. Several
patches for this helper to prepare this change are also part of this
patch series.
5) Add 64-bit handles to uniquely objects in nf_tables, from Harsha
Sharma.
6) Remove log message that several netfilter subsystems print at
boot/load time.
7) Restore x_tables module autoloading, that got broken in a previous
patch to allow singleton NAT hook callback registration per hook
spot, from Florian Westphal. Moreover, return EBUSY to report that
the singleton NAT hook slot is already in instead.
8) Several fixes for the new nf_tables flowtable representation,
including incorrect error check after nf_tables_flowtable_lookup(),
missing Kconfig dependencies that lead to build breakage and missing
initialization of priority and hooknum in flowtable object.
9) Missing NETFILTER_FAMILY_ARP dependency in Kconfig for the clusterip
target. This is due to recent updates in the core to shrink the hook
array size and compile it out if no specific family is enabled via
.config file. Patch from Florian Westphal.
10) Remove duplicated include header files, from Wei Yongjun.
11) Sparse warning fix for the NFPROTO_INET handling from the core
due to missing static function definition, also from Wei Yongjun.
12) Restore ICMPv6 Parameter Problem error reporting when
defragmentation fails, from Subash Abhinov Kasiviswanathan.
13) Remove obsolete owner field initialization from struct
file_operations, patch from Alexey Dobriyan.
14) Use boolean datatype where needed in the Netfilter codebase, from
Gustavo A. R. Silva.
15) Remove double semicolon in dynset nf_tables expression, from
Luis de Bethencourt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 Jan 2018 03:03:46 +0000 (22:03 -0500)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-01-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) bpf array map HW offload, from Jakub.
2) support for bpf_get_next_key() for LPM map, from Yonghong.
3) test_verifier now runs loaded programs, from Alexei.
4) xdp cpumap monitoring, from Jesper.
5) variety of tests, cleanups and small x64 JIT optimization, from Daniel.
6) user space can now retrieve HW JITed program, from Jiong.
Note there is a minor conflict between Russell's arm32 JIT fixes
and removal of bpf_jit_enable variable by Daniel which should
be resolved by keeping Russell's comment and removing that variable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 20 Jan 2018 03:59:33 +0000 (22:59 -0500)]
Merge git://git./linux/kernel/git/davem/net
The BPF verifier conflict was some minor contextual issue.
The TUN conflict was less trivial. Cong Wang fixed a memory leak of
tfile->tx_array in 'net'. This is an skb_array. But meanwhile in
net-next tun changed tfile->tx_arry into tfile->tx_ring which is a
ptr_ring.
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Sat, 20 Jan 2018 02:37:01 +0000 (18:37 -0800)]
Merge branch 'bpf-misc-improvements'
Daniel Borkmann says:
====================
This series adds various misc improvements to BPF: detection
of BPF helper definition misconfiguration for mem/size argument
pairs, csum_diff helper also for XDP, various test cases,
removal of the recently added pure_initcall(), restriction
of the jit sysctls to cap_sys_admin for initns, a minor size
improvement for x86 jit in alu ops, output of complexity limit
to verifier log and last but not least having the event output
more flexible with moving to const_size_or_zero type.
Thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:37 +0000 (01:24 +0100)]
bpf: move event_output to const_size_or_zero for xdp/skb as well
Similar rationale as in
a60dd35d2e39 ("bpf: change bpf_perf_event_output
arg5 type to ARG_CONST_SIZE_OR_ZERO"), change the type to CONST_SIZE_OR_ZERO
such that we can better deal with optimized code. No changes needed in
bpf_event_output() as it can also deal with 0 size entirely (e.g. as only
wake-up signal with empty frame in perf RB, or packet dumps w/o meta data
as another such possibility).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:36 +0000 (01:24 +0100)]
bpf: add upper complexity limit to verifier log
Given the limit could potentially get further adjustments in the
future, add it to the log so it becomes obvious what the current
limit is w/o having to check the source first. This may also be
helpful for debugging complexity related issues on kernels that
backport from upstream.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:35 +0000 (01:24 +0100)]
bpf, x86: small optimization in alu ops with imm
For the BPF_REG_0 (BPF_REG_A in cBPF, respectively), we can use
the short form of the opcode as dst mapping is on eax/rax and
thus save a byte per such operation. Added to add/sub/and/or/xor
for 32/64 bit when K immediate is used. There may be more such
low-hanging fruit to add in future as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:34 +0000 (01:24 +0100)]
bpf: restrict access to core bpf sysctls
Given BPF reaches far beyond just networking these days, it was
never intended to allow setting and in some cases reading those
knobs out of a user namespace root running without CAP_SYS_ADMIN,
thus tighten such access.
Also the bpf_jit_enable = 2 debugging mode should only be allowed
if kptr_restrict is not set since it otherwise can leak addresses
to the kernel log. Dump a note to the kernel log that this is for
debugging JITs only when enabled.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:33 +0000 (01:24 +0100)]
bpf: get rid of pure_initcall dependency to enable jits
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:32 +0000 (01:24 +0100)]
bpf: add couple of test cases for div/mod by zero
Add couple of missing test cases for eBPF div/mod by zero to the
new test_verifier prog runtime feature. Also one for an empty prog
and only exit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:31 +0000 (01:24 +0100)]
bpf: add couple of test cases for signed extended imms
Add a couple of test cases for interpreter and JIT that are
related to an issue we faced some time ago in Cilium [1],
which is fixed in LLVM with commit
e53750e1e086 ("bpf: fix
bug on silently truncating 64-bit immediate").
Test cases were run-time checking kernel to behave as intended
which should also provide some guidance for current or new
JITs in case they should trip over this. Added for cBPF and
eBPF.
[1] https://github.com/cilium/cilium/pull/2162
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:30 +0000 (01:24 +0100)]
bpf: add csum_diff helper to xdp as well
Useful for porting cls_bpf programs w/o increasing program
complexity limits much at the same time, so add the helper
to XDP as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Sat, 20 Jan 2018 00:24:29 +0000 (01:24 +0100)]
bpf, verifier: detect misconfigured mem, size argument pair
I've seen two patch proposals now for helper additions that used
ARG_PTR_TO_MEM or similar in reg_X but no corresponding ARG_CONST_SIZE
in reg_X+1. Verifier won't complain in such case, but it will omit
verifying the memory passed to the helper thus ending up badly.
Detect such buggy helper function signature and bail out during
verification rather than finding them through review.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jesper Dangaard Brouer [Fri, 19 Jan 2018 16:15:50 +0000 (17:15 +0100)]
samples/bpf: xdp_monitor include cpumap tracepoints in monitoring
The xdp_redirect_cpu sample have some "builtin" monitoring of the
tracepoints for xdp_cpumap_*, but it is practical to have an external
tool that can monitor these transpoint as an easy way to troubleshoot
an application using XDP + cpumap.
Specifically I need such external tool when working on Suricata and
XDP cpumap redirect. Extend the xdp_monitor tool sample with
monitoring of these xdp_cpumap_* tracepoints. Model the output format
like xdp_redirect_cpu.
Given I needed to handle per CPU decoding for cpumap, this patch also
add per CPU info on the existing monitor events. This resembles part
of the builtin monitoring output from sample xdp_rxq_info. Thus, also
covering part of that sample in an external monitoring tool.
Performance wise, the cpumap tracepoints uses bulking, which cause
them to have very little overhead. Thus, they are enabled by default.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann [Fri, 19 Jan 2018 22:26:41 +0000 (23:26 +0100)]
Merge branch 'bpf-lpm-get-next-key'
Yonghong Song says:
====================
This patch set implements MAP_GET_NEXT_KEY command for LPM_TRIE map.
This command is really useful for key enumeration, and for key deletion
if what keys in the trie are unknown.
Patch #1 implements the functionality in the kernel and patch #2
adds a test case in tools/testing/selftests/bpf.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Yonghong Song [Thu, 18 Jan 2018 23:08:51 +0000 (15:08 -0800)]
tools/bpf: add a testcase for MAP_GET_NEXT_KEY command of LPM_TRIE map
A test case is added in tools/testing/selftests/bpf/test_lpm_map.c
for MAP_GET_NEXT_KEY command. A four node trie, which
is described in kernel/bpf/lpm_trie.c, is built and the
MAP_GET_NEXT_KEY results are checked.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Yonghong Song [Thu, 18 Jan 2018 23:08:50 +0000 (15:08 -0800)]
bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map
Current LPM_TRIE map type does not implement MAP_GET_NEXT_KEY
command. This command is handy when users want to enumerate
keys. Otherwise, a different map which supports key
enumeration may be required to store the keys. If the
map data is sparse and all map data are to be deleted without
closing file descriptor, using MAP_GET_NEXT_KEY to find
all keys is much faster than enumerating all key space.
This patch implements MAP_GET_NEXT_KEY command for LPM_TRIE map.
If user provided key pointer is NULL or the key does not have
an exact match in the trie, the first key will be returned.
Otherwise, the next key will be returned.
In this implemenation, key enumeration follows a postorder
traversal of internal trie. More specific keys
will be returned first than less specific ones, given
a sequence of MAP_GET_NEXT_KEY syscalls.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Shuah Khan [Fri, 19 Jan 2018 00:36:24 +0000 (17:36 -0700)]
selftests: bpf: update .gitignore with missing generated files
Update .gitignore with missing generated files.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Roman Gushchin [Fri, 19 Jan 2018 14:17:45 +0000 (14:17 +0000)]
bpftool: recognize BPF_MAP_TYPE_CPUMAP maps
Add BPF_MAP_TYPE_CPUMAP map type to the list
of map type recognized by bpftool and define
corresponding text representation.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller [Fri, 19 Jan 2018 20:57:03 +0000 (15:57 -0500)]
Merge branch 'dsa-mv88e6xxx-ATU-VTU-irq-fixes'
Andrew Lunn says:
====================
ATU and VTU irq fixes
Further testing and code review found two sets of bugs.
Core review found a cut/paste error in the irq setup code.
A board which does not have an interrupt line from the switch to the
SoC, and experiancing an EPROBE_DEFER throw a splat when the ATU irq
was freed but never registered.
v2: Fix typ0 chip->chip->vtu_prob_irq to chip->vtu_prob_irq
0-day compile testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 18 Jan 2018 16:42:50 +0000 (17:42 +0100)]
net: dsa: mv88e6xxx: Free ATU/VTU irq only when there is chip irq
We only register the ATU and VTU irq when we have a chip level IRQ.
In the error path, we should only attempt to remove the ATU and VTU
irq if we also have a chip level IRQ.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 18 Jan 2018 16:42:49 +0000 (17:42 +0100)]
net: dsa: mv88e6xxx: Return error from irq_find_mapping()
Fix a cut/paste error. When irq_find_mapping() returns an error for
the ATU or VTU interrupt, return that error, not the value of
chip->device_irq.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Jan 2018 20:52:52 +0000 (15:52 -0500)]
Merge branch 'net-sched-cls-add-extack-support'
Alexander Aring says:
====================
net: sched: cls: add extack support
this patch adds extack support for TC classifier subsystem. The first
patch fixes some code style issues for this patch series pointed out
by checkpatch. The other patches until the last one prepares extack
handling for the TC classifier subsystem and handle generic extack
errors.
The last patch is an example for u32 classifier to add extack support
inside the callbacks delete and change. There exists a init callback as
well, but most classifier implementation run a kalloc() once to allocate
something. Not necessary _yet_ to add extack support now.
- Alex
Cc: David Ahern <dsahern@gmail.com>
changes since v3:
- fix accidentally move of config option mismatch message in PATCH 2/8
correct one is 4/8, detected by kbuildbot (Thank you)
- Removed patch "net: sched: cls: add extack support for tc_setup_cb_call"
PATCH 7/8 in version v2 as suggested by Jakub Kicinski (Thank you)
- changed NL_SET_ERR_MSG to NL_SET_ERR_MSG_MOD as suggested by Jakub Kicinski
in u32 cls (Thank You)
- Removed text from cover letter that I was waiting for Jiri's Patches as
detected by Jamal Hadi Salim (Thank you).
changes since v2:
- rebased on Jiri's patches (Thank you)
- several spelling fixes pointed out by Cong Wang (Thank you)
- several spelling fixes pointed out by David Ahern (Thank you)
- use David Ahern recommendation if config option is mismatch, but
combine it with Cong Wang recommendation to put config name into it
(Thank you)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Thu, 18 Jan 2018 16:20:55 +0000 (11:20 -0500)]
net: sched: cls_u32: add extack support
This patch adds extack support for the u32 classifier as example for
delete and init callback.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Thu, 18 Jan 2018 16:20:54 +0000 (11:20 -0500)]
net: sched: cls: add extack support for tcf_change_indev
This patch adds extack handling for the tcf_change_indev function which
is common used by TC classifier implementations.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Thu, 18 Jan 2018 16:20:53 +0000 (11:20 -0500)]
net: sched: cls: add extack support for delete callback
This patch adds extack support for classifier delete callback api. This
prepares to handle extack support inside each specific classifier
implementation.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Thu, 18 Jan 2018 16:20:52 +0000 (11:20 -0500)]
net: sched: cls: add extack support for tcf_exts_validate
The tcf_exts_validate function calls the act api change callback. For
preparing extack support for act api, this patch adds the extack as
parameter for this function which is common used in cls implementations.
Furthermore the tcf_exts_validate will call action init callback which
prepares the TC action subsystem for extack support.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Thu, 18 Jan 2018 16:20:51 +0000 (11:20 -0500)]
net: sched: cls: add extack support for change callback
This patch adds extack support for classifier change callback api. This
prepares to handle extack support inside each specific classifier
implementation.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Thu, 18 Jan 2018 16:20:50 +0000 (11:20 -0500)]
net: sched: cls_api: handle generic cls errors
This patch adds extack support for generic cls handling. The extack
will be set deeper to each called function which is not part of netdev
core api.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Thu, 18 Jan 2018 16:20:49 +0000 (11:20 -0500)]
net: sched: cls: fix code style issues
This patch changes some code style issues pointed out by checkpatch
inside the TC cls subsystem.
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 18 Jan 2018 11:55:23 +0000 (12:55 +0100)]
mlxsw: spectrum: Upper-bound supported FW version
During initialization the driver checks whether the flashed FW image
suits its requirements by checking that it's sufficiently new.
However, there's only a weak backward compatibility scheme that is
actually guaranteed by the FW, so driver must also upper bound the
version to prevent compatibility issues between current driver and some
possible future fw.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Jan 2018 20:44:19 +0000 (15:44 -0500)]
Merge branch 'nfp-devlink-capabilities-extensions-and-updates'
Jakub Kicinski says:
====================
nfp: devlink, capabilities extensions and updates
This series starts with an improvement to the usability of the device
memory accessors (CPP transactions). Next few patches are devoted to
fixing the devlink locking. After recent patches for mlxsw the locking
scheme of devlink ops has to be reworked. Following patches improve
NFP code dealing with "representors", and expands the error message
printed when driver has no support for loaded FW.
Second part of the series is focused on vNIC capabilities read from
vNIC control memory (often referred to as "BAR0" for historical reasons).
TLV capability format is established and immediately made use of. The
next patches rework parsing of features for control vNIC which allows
apps to mask out features they don't want enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:51:06 +0000 (18:51 -0800)]
nfp: bpf: disable all ctrl vNIC capabilities
BPF firmware currently exposes IRQ moderation capability.
The driver will make use of it by default, inserting 50 usec
delay to every control message exchange. This cuts the number
of messages per second we can exchange by almost half.
None of the other capabilities make much sense for BPF control
vNIC, either. Disable them all.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:51:05 +0000 (18:51 -0800)]
nfp: allow apps to disable ctrl vNIC capabilities
Most vNIC capabilities are netdev related. It makes no sense
to initialize them and waste FW resources. Some are even
counter-productive, like IRQ moderation, which will slow
down exchange of control messages.
Add to nfp_app a mask of enabled control vNIC capabilities
for apps to use. Make flower and BPF enable all capabilities
for now. No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:51:04 +0000 (18:51 -0800)]
nfp: split reading capabilities out of nfp_net_init()
nfp_net_init() is a little long and we are about to add more
code to reading capabilties. Move the capability reading,
parsing and validating out. Only actual initialization
will stay in nfp_net_init().
No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:51:03 +0000 (18:51 -0800)]
nfp: read mailbox address from TLV caps
Allow specifying alternative vNIC mailbox location in TLV caps.
This way we can size the mailbox to the needs and not necessarily
waste 512B of ctrl memory space.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:51:02 +0000 (18:51 -0800)]
nfp: read ME frequency from vNIC ctrl memory
PCIe island clock frequency is used when converting coalescing
parameters from usecs to NFP timestamps. Most chips don't run
at 1200MHz, allow FW to provide us with the real frequency.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:51:01 +0000 (18:51 -0800)]
nfp: add TLV capabilities to the BAR
NFP is entirely programmable, including the PCI data interface.
Using a fixed control BAR layout certainly makes implementations
easier, but require careful considerations when space is allocated.
Once BAR area is allocated to one feature nothing else can use it.
Allocating space statically also requires it to be sized upfront,
which leads to either unnecessary limitation or wastage.
We currently have a 32bit capability word defined which tells drivers
which application FW features are supported. Most of the bits
are exhausted. The same bits are also reused for enabling specific
features. Bulk of capabilities don't have a need for an enable bit,
however, leading to confusion and wastage.
TLVs seems like a better fit for expressing capabilities of applications
running on programmable hardware.
This patch leaves the front of the BAR as is, and declares a TLV
capability start at offset 0x58. Most of the space up to 0x0d90
is already allocated, but the used space can be wrapped with RESERVED
TLVs. E.g.:
Address Type Length
0x0058 RESERVED 0xe00 /* Wrap basic structures */
0x0e5c FEATURE_A 0x004
0x0e64 FEATURE_B 0x004
0x0e6c RESERVED 0x990 /* Wrap qeueue stats */
0x1800 FEATURE_C 0x100
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:51:00 +0000 (18:51 -0800)]
nfp: improve app not found message
When driver app matching loaded FW is not found users are faced with:
nfp: failed to find app with ID 0x%02x
This message does not properly explain that matching driver code is
either not built into the driver or the driver is too old.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:50:59 +0000 (18:50 -0800)]
nfp: protect each repr pointer individually with RCU
Representors are grouped in sets by type. Currently the whole
sets are under RCU protection, but individual representor pointers
are not. This causes some inconveniences when representors have
to be destroyed, because we have to allocate new sets to remove
any representors. Protect the individual pointers with RCU.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:50:58 +0000 (18:50 -0800)]
nfp: add nfp_reprs_get_locked() helper
The write side of repr tables is always done under pf->lock.
Add a helper to dereference repr table pointers under protection
of that lock.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:50:57 +0000 (18:50 -0800)]
nfp: register devlink after app is created
Devlink used to have two global locks: devlink lock and port lock,
our lock ordering looked like this:
devlink lock -> driver's pf->lock -> devlink port lock
After recent changes port lock was replaced with per-instance
lock. Unfortunately, new per-instance lock is taken on most
operations now. This means we can only grab the pf->lock from
the port split/unsplit ops. Lock ordering looks like this:
devlink lock -> driver's pf->lock -> devlink instance lock
Since we can't take pf->lock from most devlink ops, make sure
nfp_apps are prepared to service them as soon as devlink is
registered. Locking the pf must be pushed down after
nfp_app_init() callback.
The init order looks like this:
nfp_app_init
devlink_register
nfp_app_start
netdev/port_register
As soon as app_init is done nfp_apps must be ready to service
devlink-related callbacks. apps can only register their own
devlink objects from nfp_app_start.
Fixes:
2406e7e546b2 ("devlink: Add per devlink instance lock")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:50:56 +0000 (18:50 -0800)]
nfp: release global resources only on the remove path
NFP app is currently shut down as soon as all the vNICs are gone.
This means we can't depend on the app existing throughout the
lifetime of the device. Free the app only from PCI remove path.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 18 Jan 2018 02:50:55 +0000 (18:50 -0800)]
nfp: core: make scalar CPP helpers fail on short accesses
Currently the helpers for accessing 4 or 8 byte values over
the CPP bus return the length of IO on success. If the IO
was short caller has to deal with error handling. The short
IO for 4/8B values is completely impractical. Make the
helpers return an error if full access was not possible.
Fix the few places which are actually dealing with errors
correctly, most call sites already only deal with negative
return codes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Tue, 9 Jan 2018 12:40:21 +0000 (14:40 +0200)]
net/mlx5e: Add likely to the common RX checksum flow
Most of the packets return true for is_last_ethertype_ip, surround it
with likely compiler hint.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Kamal Heib [Tue, 28 Nov 2017 21:52:13 +0000 (23:52 +0200)]
net/mlx5e: Extend the stats group API to have update_stats()
Extend the stats group API to have an update_stats() callback which
will be used to fetch the hardware or software counters data.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Kamal Heib [Tue, 28 Nov 2017 21:18:13 +0000 (23:18 +0200)]
net/mlx5e: Merge per priority stats groups
Merge the per priority traffic and pfc groups into one group, because
both groups share the same update_stats() callback which will be
introduced in the upcoming patch.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>