Chunguang Xu [Tue, 23 Nov 2021 01:17:57 +0000 (09:17 +0800)]
ext4: fix a possible ABBA deadlock due to busy PA
We found on older kernel (3.10) that in the scenario of insufficient
disk space, system may trigger an ABBA deadlock problem, it seems that
this problem still exists in latest kernel, try to fix it here. The
main process triggered by this problem is that task A occupies the PA
and waits for the jbd2 transaction finish, the jbd2 transaction waits
for the completion of task B's IO (plug_list), but task B waits for
the release of PA by task A to finish discard, which indirectly forms
an ABBA deadlock. The related calltrace is as follows:
Task A
vfs_write
ext4_mb_new_blocks()
ext4_mb_mark_diskspace_used() JBD2
jbd2_journal_get_write_access() -> jbd2_journal_commit_transaction()
->schedule() filemap_fdatawait()
| |
| Task B |
| do_unlinkat() |
| ext4_evict_inode() |
| jbd2_journal_begin_ordered_truncate() |
| filemap_fdatawrite_range() |
| ext4_mb_new_blocks() |
-ext4_mb_discard_group_preallocations() <-----
Here, try to cancel ext4_mb_discard_group_preallocations() internal
retry due to PA busy, and do a limited number of retries inside
ext4_mb_discard_preallocations(), which can circumvent the above
problems, but also has some advantages:
1. Since the PA is in a busy state, if other groups have free PAs,
keeping the current PA may help to reduce fragmentation.
2. Continue to traverse forward instead of waiting for the current
group PA to be released. In most scenarios, the PA discard time
can be reduced.
However, in the case of smaller free space, if only a few groups have
space, then due to multiple traversals of the group, it may increase
CPU overhead. But in contrast, I feel that the overall benefit is
better than the cost.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1637630277-23496-1-git-send-email-brookxu.cn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Qing Wang [Wed, 13 Oct 2021 03:28:51 +0000 (20:28 -0700)]
ext4: replace snprintf in show functions with sysfs_emit
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1634095731-4528-1-git-send-email-wangqing@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Thu, 7 Oct 2021 15:53:36 +0000 (17:53 +0200)]
ext4: make sure to reset inode lockdep class when quota enabling fails
When we succeed in enabling some quota type but fail to enable another
one with quota feature, we correctly disable all enabled quota types.
However we forget to reset i_data_sem lockdep class. When the inode gets
freed and reused, it will inherit this lockdep class (i_data_sem is
initialized only when a slab is created) and thus eventually lockdep
barfs about possible deadlocks.
Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jan Kara [Thu, 7 Oct 2021 15:53:35 +0000 (17:53 +0200)]
ext4: make sure quota gets properly shutdown on error
When we hit an error when enabling quotas and setting inode flags, we do
not properly shutdown quota subsystem despite returning error from
Q_QUOTAON quotactl. This can lead to some odd situations like kernel
using quota file while it is still writeable for userspace. Make sure we
properly cleanup the quota subsystem in case of error.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Thu, 23 Dec 2021 01:55:06 +0000 (09:55 +0800)]
ext4: Fix BUG_ON in ext4_bread when write quota data
We got issue as follows when run syzkaller:
[ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user
[ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only
[ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0'
[ 167.983601] ------------[ cut here ]------------
[ 167.984245] kernel BUG at fs/ext4/inode.c:847!
[ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-
20211217+ #123
[ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504
[ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244
[ 167.991679] RSP: 0018:
ffff8881736f7398 EFLAGS:
00010282
[ 167.992385] RAX:
0000000000000094 RBX:
1ffff1102e6dee75 RCX:
0000000000000000
[ 167.993337] RDX:
0000000000000001 RSI:
ffffffff9b6e29e0 RDI:
ffffed102e6dee66
[ 167.994292] RBP:
ffff88816a076210 R08:
0000000000000094 R09:
ffffed107363fa09
[ 167.995252] R10:
ffff88839b1fd047 R11:
ffffed107363fa08 R12:
ffff88816a0761e8
[ 167.996205] R13:
0000000000000000 R14:
0000000000000021 R15:
0000000000000001
[ 167.997158] FS:
00007f6a1428c740(0000) GS:
ffff88839b000000(0000) knlGS:
0000000000000000
[ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 167.999025] CR2:
00007f6a140716c8 CR3:
0000000133216000 CR4:
00000000000006e0
[ 167.999987] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 168.000944] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 168.001899] Call Trace:
[ 168.002235] <TASK>
[ 168.007167] ext4_bread+0xd/0x53
[ 168.007612] ext4_quota_write+0x20c/0x5c0
[ 168.010457] write_blk+0x100/0x220
[ 168.010944] remove_free_dqentry+0x1c6/0x440
[ 168.011525] free_dqentry.isra.0+0x565/0x830
[ 168.012133] remove_tree+0x318/0x6d0
[ 168.014744] remove_tree+0x1eb/0x6d0
[ 168.017346] remove_tree+0x1eb/0x6d0
[ 168.019969] remove_tree+0x1eb/0x6d0
[ 168.022128] qtree_release_dquot+0x291/0x340
[ 168.023297] v2_release_dquot+0xce/0x120
[ 168.023847] dquot_release+0x197/0x3e0
[ 168.024358] ext4_release_dquot+0x22a/0x2d0
[ 168.024932] dqput.part.0+0x1c9/0x900
[ 168.025430] __dquot_drop+0x120/0x190
[ 168.025942] ext4_clear_inode+0x86/0x220
[ 168.026472] ext4_evict_inode+0x9e8/0xa22
[ 168.028200] evict+0x29e/0x4f0
[ 168.028625] dispose_list+0x102/0x1f0
[ 168.029148] evict_inodes+0x2c1/0x3e0
[ 168.030188] generic_shutdown_super+0xa4/0x3b0
[ 168.030817] kill_block_super+0x95/0xd0
[ 168.031360] deactivate_locked_super+0x85/0xd0
[ 168.031977] cleanup_mnt+0x2bc/0x480
[ 168.033062] task_work_run+0xd1/0x170
[ 168.033565] do_exit+0xa4f/0x2b50
[ 168.037155] do_group_exit+0xef/0x2d0
[ 168.037666] __x64_sys_exit_group+0x3a/0x50
[ 168.038237] do_syscall_64+0x3b/0x90
[ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae
In order to reproduce this problem, the following conditions need to be met:
1. Ext4 filesystem with no journal;
2. Filesystem image with incorrect quota data;
3. Abort filesystem forced by user;
4. umount filesystem;
As in ext4_quota_write:
...
if (EXT4_SB(sb)->s_journal && !handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
...
We only check handle if NULL when filesystem has journal. There is need
check handle if NULL even when filesystem has no journal.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Sebastian Andrzej Siewior [Thu, 23 Dec 2021 16:44:36 +0000 (17:44 +0100)]
ext4: destroy ext4_fc_dentry_cachep kmemcache on module removal
The kmemcache for ext4_fc_dentry_cachep remains registered after module
removal.
Destroy ext4_fc_dentry_cachep kmemcache on module removal.
Fixes:
aa75f4d3daaeb ("ext4: main fast-commit commit path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211110134640.lyku5vklvdndw6uk@linutronix.de
Link: https://lore.kernel.org/r/YbiK3JetFFl08bd7@linutronix.de
Link: https://lore.kernel.org/r/20211223164436.2628390-1-bigeasy@linutronix.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Xin Yin [Thu, 23 Dec 2021 03:23:37 +0000 (11:23 +0800)]
ext4: fast commit may miss tracking unwritten range during ftruncate
If use FALLOC_FL_KEEP_SIZE to alloc unwritten range at bottom, the
inode->i_size will not include the unwritten range. When call
ftruncate with fast commit enabled, it will miss to track the
unwritten range.
Change to trace the full range during ftruncate.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-3-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Xin Yin [Thu, 23 Dec 2021 03:23:36 +0000 (11:23 +0800)]
ext4: use ext4_ext_remove_space() for fast commit replay delete range
For now ,we use ext4_punch_hole() during fast commit replay delete range
procedure. But it will be affected by inode->i_size, which may not
correct during fast commit replay procedure. The following test will
failed.
-create & write foo (len 1000K)
-falloc FALLOC_FL_ZERO_RANGE foo (range 400K - 600K)
-create & fsync bar
-falloc FALLOC_FL_PUNCH_HOLE foo (range 300K-500K)
-fsync foo
-crash before a full commit
After the fast_commit reply procedure, the range 400K-500K will not be
removed. Because in this case, when calling ext4_punch_hole() the
inode->i_size is 0, and it just retruns with doing nothing.
Change to use ext4_ext_remove_space() instead of ext4_punch_hole()
to remove blocks of inode directly.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223032337.5198-2-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Xin Yin [Tue, 21 Dec 2021 02:28:39 +0000 (10:28 +0800)]
ext4: fix fast commit may miss tracking range for FALLOC_FL_ZERO_RANGE
when call falloc with FALLOC_FL_ZERO_RANGE, to set an range to unwritten,
which has been already initialized. If the range is align to blocksize,
fast commit will not track range for this change.
Also track range for unwritten range in ext4_map_blocks().
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211221022839.374606-1-yinxin.x@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Harshad Shirwadkar [Thu, 23 Dec 2021 20:21:40 +0000 (12:21 -0800)]
ext4: update fast commit TODOs
This series takes care of a couple of TODOs and adds new ones. Update
the TODOs section to reflect current state and future work that needs
to happen.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-5-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 23 Dec 2021 20:21:39 +0000 (12:21 -0800)]
ext4: simplify updating of fast commit stats
Move fast commit stats updating logic to a separate function from
ext4_fc_commit(). This significantly improves readability of
ext4_fc_commit().
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-4-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 23 Dec 2021 20:21:38 +0000 (12:21 -0800)]
ext4: drop ineligible txn start stop APIs
This patch drops ext4_fc_start_ineligible() and
ext4_fc_stop_ineligible() APIs. Fast commit ineligible transactions
should simply call ext4_fc_mark_ineligible() after starting the
trasaction.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-3-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Harshad Shirwadkar [Thu, 23 Dec 2021 20:21:37 +0000 (12:21 -0800)]
ext4: use ext4_journal_start/stop for fast commit transactions
This patch drops all calls to ext4_fc_start_update() and
ext4_fc_stop_update(). To ensure that there are no ongoing journal
updates during fast commit, we also make jbd2_fc_begin_commit() lock
journal for updates. This way we don't have to maintain two different
transaction start stop APIs for fast commit and full commit. This
patch doesn't remove the functions altogether since in future we want
to have inode level locking for fast commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211223202140.2061101-2-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 22 Dec 2021 10:45:17 +0000 (11:45 +0100)]
ext4: fix i_version handling on remount
i_version mount option is getting lost on remount. This is because the
'i_version' mount option differs from the util-linux mount option
'iversion', but it has exactly the same functionality. We have to
specifically notify the vfs that this is what we want by setting
appropriate flag in fc->sb_flags. Fix it and as a result we can remove
*flags argument from __ext4_remount(); do the same for
__ext4_fill_super().
In addition set out to deprecate ext4 specific 'i_version' mount option
in favor or 'iversion' by kernel version 5.20.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Fixes:
cebe85d570cf ("ext4: switch to the new mount api")
Link: https://lore.kernel.org/r/20211222104517.11187-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 22 Dec 2021 10:45:16 +0000 (11:45 +0100)]
ext4: remove lazytime/nolazytime mount options handled by MS_LAZYTIME
The lazytime and nolazytime mount options were added temporarily back in
2015 with commit
a26f49926da9 ("ext4: add optimization for the lazytime
mount option"). It think it has been enough time for the util-linux with
lazytime support to get widely used. Remove the mount options.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20211222104517.11187-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Mon, 20 Dec 2021 15:26:57 +0000 (16:26 +0100)]
ext4: don't fail remount if journalling mode didn't change
Switching to the new mount api introduced inconsistency in how the
journalling mode mount option (data=) is handled during a remount.
Ext4 always prevented changing the journalling mode during the remount,
however the new code always fails the remount when the journalling mode
is specified, even if it remains unchanged. Fix it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes:
cebe85d570cf ("ext4: switch to the new mount api")
Link: https://lore.kernel.org/r/20211220152657.101599-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:57 +0000 (16:18 +0200)]
ext4: Remove unused match_table_t tokens
Remove unused match_table_t, slim down mount_opts structure by removing
unnecessary definitions, remove redundant MOPT_ flags and clean up
ext4_parse_param() by converting the most of the if/else branching to
switch except for the MOPT_SET/MOPT_CEAR handling.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-14-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:56 +0000 (16:18 +0200)]
ext4: switch to the new mount api
Add the necessary functions for the fs_context_operations. Convert and
rename ext4_remount() and ext4_fill_super() to ext4_get_tree() and
ext4_reconfigure() respectively and switch the ext4 to use the new api.
One user facing change is the fact that we no longer have access to the
entire string of mount options provided by mount(2) since the mount api
does not store it anywhere. As a result we can't print the options to
the log as we did in the past after the successful mount.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-13-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:55 +0000 (16:18 +0200)]
ext4: change token2str() to use ext4_param_specs
Change token2str() to use ext4_param_specs instead of tokens so that we
can get rid of tokens entirely.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-12-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:54 +0000 (16:18 +0200)]
ext4: clean up return values in handle_mount_opt()
Clean up return values in handle_mount_opt() and rename the function to
ext4_parse_param()
Now we can use it in fs_context_operations as .parse_param.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-11-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:53 +0000 (16:18 +0200)]
ext4: Completely separate options parsing and sb setup
The new mount api separates option parsing and super block setup into
two distinct steps and so we need to separate the options parsing out of
the ext4_fill_super() and ext4_remount().
In order to achieve this we have to create new ext4_fill_super() and
ext4_remount() functions which will serve its purpose only until we
actually do convert to the new api (as such they are only temporary for
this patch series) and move the option parsing out of the old function
which will now be renamed to __ext4_fill_super() and __ext4_remount().
There is a small complication in the fact that while the mount option
parsing is going to happen before we get to __ext4_fill_super(), the
mount options stored in the super block itself needs to be applied
first, before the user specified mount options.
So with this patch we're going through the following sequence:
- parse user provided options (including sb block)
- initialize sbi and store s_sb_block if provided
- in __ext4_fill_super()
- read the super block
- parse and apply options specified in s_mount_opts
- check and apply user provided options stored in ctx
- continue with the regular ext4_fill_super operation
It's not exactly the most elegant solution, but if we still want to
support s_mount_opts we have to do it in this order.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-10-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:52 +0000 (16:18 +0200)]
ext4: get rid of super block and sbi from handle_mount_ops()
At the parsing phase of mount in the new mount api sb will not be
available. We've already removed some uses of sb and sbi, but now we
need to get rid of the rest of it.
Use ext4_fs_context to store all of the configuration specification so
that it can be later applied to the super block and sbi.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-9-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:51 +0000 (16:18 +0200)]
ext4: check ext2/3 compatibility outside handle_mount_opt()
At the parsing phase of mount in the new mount api sb will not be
available so move ext2/3 compatibility check outside handle_mount_opt().
Unfortunately we will lose the ability to show exactly which option is
not compatible.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-8-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:50 +0000 (16:18 +0200)]
ext4: move quota configuration out of handle_mount_opt()
At the parsing phase of mount in the new mount api sb will not be
available so move quota confiquration out of handle_mount_opt() by
noting the quota file names in the ext4_fs_context structure to be
able to apply it later.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-7-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:49 +0000 (16:18 +0200)]
ext4: Allow sb to be NULL in ext4_msg()
At the parsing phase of mount in the new mount api sb will not be
available so allow sb to be NULL in ext4_msg and use that in
handle_mount_opt().
Also change return value to appropriate -EINVAL where needed.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-6-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:48 +0000 (16:18 +0200)]
ext4: Change handle_mount_opt() to use fs_parameter
Use the new mount option specifications to parse the options in
handle_mount_opt(). However we're still using the old API to get the
options string.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-5-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:47 +0000 (16:18 +0200)]
ext4: move option validation to a separate function
Move option validation out of parse_options() into a separate function
ext4_validate_options().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-4-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:46 +0000 (16:18 +0200)]
ext4: Add fs parameter specifications for mount options
Create an array of fs_parameter_spec called ext4_param_specs to
hold the mount option specifications we're going to be using with the
new mount api.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-3-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Lukas Czerner [Wed, 27 Oct 2021 14:18:45 +0000 (16:18 +0200)]
fs_parse: allow parameter value to be empty
Allow parameter value to be empty by specifying fs_param_can_be_empty
flag.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Link: https://lore.kernel.org/r/20211027141857.33657-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Sun, 5 Dec 2021 22:08:22 +0000 (14:08 -0800)]
Linux 5.16-rc4
Linus Torvalds [Sun, 5 Dec 2021 20:58:18 +0000 (12:58 -0800)]
Merge tag 'for-5.16/parisc-6' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is
now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
file name
- Fix compiler warnings by annotating parisc agp init functions with
__init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig"
* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
parisc: Fix "make install" on newer debian releases
parisc/agp: Annotate parisc agp init functions with __init
parisc: Enable sata sil, audit and usb support on 64-bit defconfig
parisc: Fix KBUILD_IMAGE for self-extracting kernel
Linus Torvalds [Sun, 5 Dec 2021 17:34:57 +0000 (09:34 -0800)]
Merge tag 'usb-5.16-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for a few reported issues. Included in
here are:
- xhci fix for a _much_ reported regression. I don't think there's a
community distro that has not reported this problem yet :(
- new USB quirk addition
- cdns3 minor fixes
- typec regression fix.
All of these have been in linux-next with no reported problems, and
the xhci fix has been reported by many to resolve their reported
problem"
* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
Linus Torvalds [Sun, 5 Dec 2021 17:13:20 +0000 (09:13 -0800)]
Merge tag 'tty-5.16-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes for 5.16-rc4 to
resolve a number of reported problems.
They include:
- liteuart serial driver fixes
- 8250_pci serial driver fixes for pericom devices
- 8250 RTS line control fix while in RS-485 mode
- tegra serial driver fix
- msm_serial driver fix
- pl011 serial driver new id
- fsl_lpuart revert of broken change
- 8250_bcm7271 serial driver fix
- MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1
- vgacon fix for reported problem
All of these, except for the 8250_bcm7271 fix have been in linux-next
with no reported problem. The 8250_bcm7271 fix was added to the tree
on Friday so no chance to be linux-next yet. But it should be fine as
the affected developers submitted it"
* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_bcm7271: UART errors after resuming from S2
serial: 8250_pci: rewrite pericom_do_set_divisor()
serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
serial: 8250: Fix RTS modem control while in rs485 mode
Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
serial: liteuart: relax compile-test dependencies
serial: liteuart: fix minor-number leak on probe errors
serial: liteuart: fix use-after-free and memleak on unbind
serial: liteuart: Fix NULL pointer dereference in ->remove()
vgacon: Propagate console boot parameters before calling `vc_resize'
tty: serial: msm_serial: Deactivate RX DMA for polling support
serial: pl011: Add ACPI SBSA UART match id
serial: core: fix transmit-buffer reset and memleak
MAINTAINERS: Add rpmsg tty driver maintainer
Linus Torvalds [Sun, 5 Dec 2021 16:58:52 +0000 (08:58 -0800)]
Merge tag 'timers_urgent_for_v5.16_rc4' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
mode runs for prolonged periods with interrupts disabled and ends up
programming the next tick in the past, leading to that storm
* tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/nohz: Last resort update jiffies on nohz_full IRQ entry
Linus Torvalds [Sun, 5 Dec 2021 16:53:31 +0000 (08:53 -0800)]
Merge tag 'sched_urgent_for_v5.16_rc4' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Properly init uclamp_flags of a runqueue, on first enqueuing
- Fix preempt= callback return values
- Correct utime/stime resource usage reporting on nohz_full to return
the proper times instead of shorter ones
* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
preempt/dynamic: Fix setup_preempt_mode() return value
sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
Linus Torvalds [Sun, 5 Dec 2021 16:43:35 +0000 (08:43 -0800)]
Merge tag 'x86_urgent_for_v5.16_rc4' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix a couple of SWAPGS fencing issues in the x86 entry code
- Use the proper operand types in __{get,put}_user() to prevent
truncation in SEV-ES string io
- Make sure the kernel mappings are present in trampoline_pgd in order
to prevent any potential accesses to unmapped memory after switching
to it
- Fix a trivial list corruption in objtool's pv_ops validation
- Disable the clocksource watchdog for TSC on platforms which claim
that the TSC is constant, doesn't stop in sleep states, CPU has TSC
adjust and the number of sockets of the platform are max 2, to
prevent erroneous markings of the TSC as unstable.
- Make sure TSC adjust is always checked not only when going idle
- Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
the FPU code
- Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention
* tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
x86/entry: Use the correct fence macro after swapgs in kernel CR3
x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
x86/64/mm: Map all kernel memory into trampoline_pgd
objtool: Fix pv_ops noinstr validation
x86/tsc: Disable clocksource watchdog for TSC on qualified platorms
x86/tsc: Add a timer to make sure TSC_adjust is always checked
x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog()
x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define
Linus Torvalds [Sun, 5 Dec 2021 16:25:33 +0000 (08:25 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull more kvm fixes from Paolo Bonzini:
- Static analysis fix
- New SEV-ES protocol for communicating invalid VMGEXIT requests
- Ensure APICv is considered inactive if there is no APIC
- Fix reserved bits for AMD PerfEvtSeln register
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
KVM: x86/mmu: Retry page fault if root is invalidated by memslot update
KVM: VMX: Set failure code in prepare_vmcs02()
KVM: ensure APICv is considered inactive if there is no APIC
KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register
Tom Lendacky [Thu, 2 Dec 2021 18:52:05 +0000 (12:52 -0600)]
KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT
exit code or exit parameters fails.
The VMGEXIT instruction can be issued from userspace, even though
userspace (likely) can't update the GHCB. To prevent userspace from being
able to kill the guest, return an error through the GHCB when validation
fails rather than terminating the guest. For cases where the GHCB can't be
updated (e.g. the GHCB can't be mapped, etc.), just return back to the
guest.
The new error codes are documented in the lasest update to the GHCB
specification.
Fixes:
291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <
b57280b5562893e2616257ac9c2d4525a9aeeb42.
1638471124.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 9 Nov 2021 22:23:50 +0000 (22:23 +0000)]
KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so
that KVM falls back to __vmalloc() if physically contiguous memory isn't
available. The buffer is purely a KVM software construct, i.e. there's
no need for it to be physically contiguous.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20211109222350.2266045-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sean Christopherson [Tue, 9 Nov 2021 22:23:49 +0000 (22:23 +0000)]
KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
Return appropriate error codes if setting up the GHCB scratch area for an
SEV-ES guest fails. In particular, returning -EINVAL instead of -ENOMEM
when allocating the kernel buffer could be confusing as userspace would
likely suspect a guest issue.
Fixes:
8f423a80d299 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20211109222350.2266045-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sun, 5 Dec 2021 01:22:53 +0000 (17:22 -0800)]
Merge tag 'xfs-5.16-fixes-2' of git://git./fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Remove an unnecessary (and backwards) rename flags check that
duplicates a VFS level check"
* tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove incorrect ASSERT in xfs_rename
Linus Torvalds [Sat, 4 Dec 2021 21:43:52 +0000 (13:43 -0800)]
Merge tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three SMB3 multichannel/fscache fixes and a DFS fix.
In testing multichannel reconnect scenarios recently various problems
with the cifs.ko implementation of fscache were found (e.g. incorrect
initialization of fscache cookies in some cases)"
* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: avoid use of dstaddr as key for fscache client cookie
cifs: add server conn_id to fscache client cookie
cifs: wait for tcon resource_id before getting fscache super
cifs: fix missed refcounting of ipc tcon
Helge Deller [Sat, 4 Dec 2021 20:21:46 +0000 (21:21 +0100)]
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
In commit
c8c3735997a3 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour. On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.
This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.
Fixes:
c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+
Helge Deller [Sat, 4 Dec 2021 20:14:40 +0000 (21:14 +0100)]
parisc: Fix "make install" on newer debian releases
On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+
Linus Torvalds [Sat, 4 Dec 2021 16:38:25 +0000 (08:38 -0800)]
Merge tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"A single fix for repeated printk spam from loop"
* tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
loop: Use pr_warn_once() for loop_control_remove() warning
Linus Torvalds [Sat, 4 Dec 2021 16:34:59 +0000 (08:34 -0800)]
Merge tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Just a single fix preventing repeated retries of task_work based io-wq
thread creation, fixing a regression from when io-wq was made more (a
bit too much) resilient against signals"
* tag 'io_uring-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
io-wq: don't retry task_work creation failure on fatal conditions
Linus Torvalds [Sat, 4 Dec 2021 16:28:42 +0000 (08:28 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
One is a fix to FC recovery (lpfc) and the other is an enhancement to
support the Intel Alder Motherboard with the UFS driver which comes
under the -rc exception process for hardware enabling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Add support for Intel ADL
scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
Linus Torvalds [Sat, 4 Dec 2021 16:13:20 +0000 (08:13 -0800)]
Merge tag 'gfs2-v5.16-rc4-fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Since commit
486408d690e1 ("gfs2: Cancel remote delete work
asynchronously"), inode create and lookup-by-number can overlap more
easily and we can end up with temporary duplicate inodes. Fix the
code to prevent that.
- Fix a BUG demoting weak glock holders from a remote node.
* tag 'gfs2-v5.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_create_inode rework
gfs2: gfs2_inode_lookup rework
gfs2: gfs2_inode_lookup cleanup
gfs2: Fix remote demote of weak glock holders
Qais Yousef [Thu, 2 Dec 2021 11:20:33 +0000 (11:20 +0000)]
sched/uclamp: Fix rq->uclamp_max not set on first enqueue
Commit
d81ae8aac85c ("sched/uclamp: Fix initialization of struct
uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to
match the woken up task's uclamp_max when the rq is idle.
The code was relying on rq->uclamp_max initialized to zero, so on first
enqueue
static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
enum uclamp_id clamp_id)
{
...
if (uc_se->value > READ_ONCE(uc_rq->value))
WRITE_ONCE(uc_rq->value, uc_se->value);
}
was actually resetting it. But since commit
d81ae8aac85c changed the
default to 1024, this no longer works. And since rq->uclamp_flags is
also initialized to 0, neither above code path nor uclamp_idle_reset()
update the rq->uclamp_max on first wake up from idle.
This is only visible from first wake up(s) until the first dequeue to
idle after enabling the static key. And it only matters if the
uclamp_max of this task is < 1024 since only then its uclamp_max will be
effectively ignored.
Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to
ensure uclamp_idle_reset() is called which then will update the rq
uclamp_max value as expected.
Fixes:
d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
Andrew Halaney [Fri, 3 Dec 2021 23:32:03 +0000 (17:32 -0600)]
preempt/dynamic: Fix setup_preempt_mode() return value
__setup() callbacks expect 1 for success and 0 for failure. Correct the
usage here to reflect that.
Fixes:
826bfeb37bb4 ("preempt/dynamic: Support dynamic preempt with preempt= boot option")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211203233203.133581-1-ahalaney@redhat.com
Linus Torvalds [Fri, 3 Dec 2021 20:27:08 +0000 (12:27 -0800)]
Merge tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fix OpRegion pointer arithmetic (Zhenyu Wang)
- Fix comment format triggering kernel-doc warnings (Randy Dunlap)
* tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio:
vfio/pci: Fix OpRegion read
vfio: remove all kernel-doc notation
Linus Torvalds [Fri, 3 Dec 2021 20:22:56 +0000 (12:22 -0800)]
Merge tag 'pm-5.16-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a CPU hot-add issue in the cpufreq core, fix a comment in
the cpufreq core code and update its documentation, and disable the
DTPM (Dynamic Thermal Power Management) code for the time being to
prevent it from causing issues to appear.
Specifics:
- Disable DTPM for this cycle to prevent it from causing issues to
appear on otherwise functional systems (Daniel Lezcano)
- Fix cpufreq sysfs interface failure related to physical CPU hot-add
(Xiongfeng Wang)
- Fix comment in cpufreq core and update its documentation (Tang
Yizhou)"
* tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: DTPM: Drop unused local variable from init_dtpm()
cpufreq: docs: Update core.rst
cpufreq: Fix a comment in cpufreq_policy_free
powercap/drivers/dtpm: Disable DTPM at boot time
cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()
Linus Torvalds [Fri, 3 Dec 2021 19:46:20 +0000 (11:46 -0800)]
Merge tag 's390-5.16-4' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix potential overlap of pseudo-MMIO addresses with MIO addresses
- Fix stack unwinder test case inline assembly compile error that
happens with LLVM's integrated assembler
- Update defconfigs
* tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/pci: move pseudo-MMIO to prevent MIO overlap
s390/test_unwind: use raw opcode instead of invalid instruction
Linus Torvalds [Fri, 3 Dec 2021 18:50:14 +0000 (10:50 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc4.
One of them is just a trivial documentation fix, whereas the other two
address a warning in the kexec code and a crash in ftrace on systems
implementing BTI.
The latter patch has a couple of ugly ifdefs which Mark plans to clean
up separately, but as-is the patch is straightforward for backporting
to stable kernels.
Summary:
- Add missing BTI landing instructions to the ftrace*_caller
trampolines
- Fix kexec() WARN when DEBUG_VIRTUAL is enabled
- Fix PAC documentation by removing stale references to compiler
flags"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
Linus Torvalds [Fri, 3 Dec 2021 18:44:16 +0000 (10:44 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has another set of driver bugfixes, mostly for the stm32f7 driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: Handle a spurious start completion interrupt flag
i2c: stm32f7: use proper DMAENGINE API for termination
i2c: stm32f7: stop dma transfer in case of NACK
i2c: stm32f7: recover the bus on access timeout
i2c: stm32f7: flush TX FIFO upon transfer errors
i2c: cbus-gpio: set atomic transfer callback
Linus Torvalds [Fri, 3 Dec 2021 18:38:45 +0000 (10:38 -0800)]
Merge tag 'libata-5.16-rc4' of git://git./linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
"Two sparse warning fixes and a couple of patches to fix an issue with
sata_fsl driver module removal:
- A couple of patches to avoid sparse warnings in libata-sata and in
the pata_falcon driver (from Yang and Finn).
- A couple of sata_fsl driver patches fixing IRQ free and proc
unregister on module removal (from Baokun)"
* tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: replace snprintf in show functions with sysfs_emit
sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
pata_falcon: Avoid type warnings from sparse
Shyam Prasad N [Thu, 2 Dec 2021 07:46:54 +0000 (07:46 +0000)]
cifs: avoid use of dstaddr as key for fscache client cookie
server->dstaddr can change when the DNS mapping for the
server hostname changes. But conn_id is a u64 counter
that is incremented each time a new TCP connection
is setup. So use only that as a key.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Thu, 2 Dec 2021 07:30:00 +0000 (07:30 +0000)]
cifs: add server conn_id to fscache client cookie
The fscache client cookie uses the server address
(and port) as the cookie key. This is a problem when
nosharesock is used. Two different connections will
use duplicate cookies. Avoid this by adding
server->conn_id to the key, so that it's guaranteed
that cookie will not be duplicated.
Also, for secondary channels of a session, copy the
fscache pointer from the primary channel. The primary
channel is guaranteed not to go away as long as secondary
channels are in use. Also addresses minor problem found
by kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Shyam Prasad N [Thu, 2 Dec 2021 07:14:42 +0000 (07:14 +0000)]
cifs: wait for tcon resource_id before getting fscache super
The logic for initializing tcon->resource_id is done inside
cifs_root_iget. fscache super cookie relies on this for aux
data. So we need to push the fscache initialization to this
later point during mount.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Thu, 2 Dec 2021 18:29:35 +0000 (15:29 -0300)]
cifs: fix missed refcounting of ipc tcon
Fix missed refcounting of IPC tcon used for getting domain-based DFS
root referrals. We want to keep it alive as long as mount is active
and can be refreshed. For standalone DFS root referrals it wouldn't
be a problem as the client ends up having an IPC tcon for both mount
and cache.
Fixes:
c88f7dcd6d64 ("cifs: support nested dfs links over reconnect")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Lai Jiangshan [Fri, 26 Nov 2021 10:11:23 +0000 (18:11 +0800)]
x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.
In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.
This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.
And, with XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.
[ bp: Massage commit message. ]
Fixes:
7f2590a110b8 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
Lai Jiangshan [Fri, 26 Nov 2021 10:11:22 +0000 (18:11 +0800)]
x86/entry: Use the correct fence macro after swapgs in kernel CR3
The commit
c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching")
removed a CR3 write in the faulting path of load_gs_index().
But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is
enabled, see spectre_v1_select_mitigation().
Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3
and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make
sure speculation is blocked.
[ bp: Massage commit message and comment. ]
Fixes:
c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com
Linus Torvalds [Wed, 1 Dec 2021 18:06:14 +0000 (10:06 -0800)]
fget: check that the fd still exists after getting a ref to it
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit
cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK").
See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.
The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.
This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design. Getting that reference count out of order isn't a problem per
se.
But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.
In commit
cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.
That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lai Jiangshan [Fri, 26 Nov 2021 10:11:21 +0000 (18:11 +0800)]
x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
Commit
18ec54fdd6d18 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")
added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In
paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both
branches. This is because the fence is required for both cases since the
CR3 write is conditional even when PTI is enabled.
But
96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
changed the order of SWAPGS and the CR3 write. And it missed the needed
FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case.
Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY
can cover both branches.
[ bp: Massage, fix typos, remove obsolete comment while at it. ]
Fixes:
96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com
Rafael J. Wysocki [Fri, 3 Dec 2021 17:09:32 +0000 (18:09 +0100)]
Merge branch 'powercap'
Merge DTPM fixes for 5.16-rc4.
* powercap:
powercap: DTPM: Drop unused local variable from init_dtpm()
powercap/drivers/dtpm: Disable DTPM at boot time
Michael Sterritt [Fri, 19 Nov 2021 23:27:57 +0000 (15:27 -0800)]
x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
Properly type the operands being passed to __put_user()/__get_user().
Otherwise, these routines truncate data for dependent instructions
(e.g., INSW) and only read/write one byte.
This has been tested by sending a string with REP OUTSW to a port and
then reading it back in with REP INSW on the same port.
Previous behavior was to only send and receive the first char of the
size. For example, word operations for "abcd" would only read/write
"ac". With change, the full string is now written and read back.
Fixes:
f980f9c31a923 (x86/sev-es: Compile early handler code into kernel image)
Signed-off-by: Michael Sterritt <sterritt@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20211119232757.176201-1-sterritt@google.com
Rafael J. Wysocki [Fri, 3 Dec 2021 16:51:59 +0000 (17:51 +0100)]
powercap: DTPM: Drop unused local variable from init_dtpm()
The dtpm_descr variable in init_dtpm() is not used after commit
f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time"),
so drop it.
Fixes:
f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jens Axboe [Fri, 3 Dec 2021 02:40:15 +0000 (19:40 -0700)]
io-wq: don't retry task_work creation failure on fatal conditions
We don't want to be retrying task_work creation failure if there's
an actual signal pending for the parent task. If we do, then we can
enter an infinite loop of perpetually retrying and each retry failing
with -ERESTARTNOINTR because a signal is pending.
Fixes:
3146cba99aa2 ("io-wq: make worker creation resilient against signals")
Reported-by: Florian Fischer <florian.fl.fischer@fau.de>
Link: https://lore.kernel.org/io-uring/20211202165606.mqryio4yzubl7ms5@pasture/
Tested-by: Florian Fischer <florian.fl.fischer@fau.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Al Cooper [Wed, 1 Dec 2021 20:14:02 +0000 (15:14 -0500)]
serial: 8250_bcm7271: UART errors after resuming from S2
There is a small window in time during resume where the hardware
flow control signal RTS can be asserted (which allows a sender to
resume sending data to the UART) but the baud rate has not yet
been restored. This will cause corrupted data and FRAMING, OVERRUN
and BREAK errors. This is happening because the MCTRL register is
shadowed in uart_port struct and is later used during resume to set
the MCTRL register during both serial8250_do_startup() and
uart_resume_port(). Unfortunately, serial8250_do_startup()
happens before the UART baud rate is restored. The fix is to clear
the shadowed mctrl value at the end of suspend and restore it at the
end of resume.
Fixes:
41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhou Qingyang [Tue, 30 Nov 2021 17:27:00 +0000 (01:27 +0800)]
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring
and there is a dereference of it in cdnsp_endpoint_init(), which could
lead to a NULL pointer dereference on failure of cdnsp_ring_alloc().
Fix this bug by adding a check of pep->ring.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes:
3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@vger.kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Li [Tue, 30 Nov 2021 15:42:39 +0000 (09:42 -0600)]
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
This issue was found at android12 MTP.
1. MTP submit many out urb request.
2. Cancel left requests (>20) when enough data get from host
3. Send ACK by IN endpoint.
4. MTP submit new out urb request.
5. 4's urb never complete.
TRACE LOG:
MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req:
00000000299e6836, req buff
000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0
MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req:
00000000299e6836, req buff
000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0
MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req:
0000000080b7bde6, req buff
000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0
MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req:
0000000080b7bde6, req buff
000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0
....
MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req:
00000000afbccb7d, req buff
0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req:
00000000afbccb7d, req buff
00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard
MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit
MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb
000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0
MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr
ffd50414
....
irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out:
01000408 ISP , ep_traddr:
ffd508ac ep_last_sid:
00000000 use_streams: 0
irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb
0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0
irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req:
00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184
Actually DMA pos already bigger than previous submit request
afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong.
The TRB link is below when irq happen.
DEQ LINK LINK LINK LINK LINK .... TRB(
afbccb7d):START DMA(EP_TRADDR).
Original code check LINK TRB, but DEQ just move one step.
LINK DEQ LINK LINK LINK LINK .... TRB(
afbccb7d):START DMA(EP_TRADDR).
This patch skip all LINK TRB and sync DEQ to trb's start.
LINK LINK LINK LINK LINK .... DEQ = TRB(
afbccb7d):START DMA(EP_TRADDR).
Acked-by: Peter Chen <peter.chen@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Badhri Jagan Sridharan [Tue, 30 Nov 2021 00:18:25 +0000 (16:18 -0800)]
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."
This change makes TCPM to wait in SNK_DEBOUNCED state until
CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously,
TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON.
This causes TCPM to loop continuously when connected to a
faulty power source that does not present vbus. Waiting in
SNK_DEBOUNCED also ensures that TCPM is adherant to
"4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements.
[ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
[ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6169.931296] disable vbus discharge ret:0
[ 6169.931301] Setting usb_comm capable false
[ 6169.932783] Setting voltage/current limit 0 mV 0 mA
[ 6169.932802] polarity 0
[ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0
[ 6169.936689] cc:=0
[ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 6170.036896] Start toggling
[ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6170.693304] disable vbus discharge ret:0
[ 6170.693308] Setting usb_comm capable false
[ 6170.695193] Setting voltage/current limit 0 mV 0 mA
[ 6170.695210] polarity 0
[ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0
[ 6170.701896] cc:=0
[ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
Fixes:
f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ole Ernst [Sat, 27 Nov 2021 09:05:45 +0000 (10:05 +0100)]
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71
Disable LPM to resolve the issue.
Signed-off-by: Ole Ernst <olebowle@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Fri, 26 Nov 2021 12:23:40 +0000 (14:23 +0200)]
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.
The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.
Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.
The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.
Fixes:
ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joerg Roedel [Thu, 2 Dec 2021 15:32:26 +0000 (16:32 +0100)]
x86/64/mm: Map all kernel memory into trampoline_pgd
The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff
range of kernel memory (with 4-level paging). This range contains the
kernel's text+data+bss mappings and the module mapping space but not the
direct mapping and the vmalloc area.
This is enough to get the application processors out of real-mode, but
for code that switches back to real-mode the trampoline_pgd is missing
important parts of the address space. For example, consider this code
from arch/x86/kernel/reboot.c, function machine_real_restart() for a
64-bit kernel:
#ifdef CONFIG_X86_32
load_cr3(initial_page_table);
#else
write_cr3(real_mode_header->trampoline_pgd);
/* Exiting long mode will fail if CR4.PCIDE is set. */
if (boot_cpu_has(X86_FEATURE_PCID))
cr4_clear_bits(X86_CR4_PCIDE);
#endif
/* Jump to the identity-mapped low memory code */
#ifdef CONFIG_X86_32
asm volatile("jmpl *%0" : :
"rm" (real_mode_header->machine_real_restart_asm),
"a" (type));
#else
asm volatile("ljmpl *%0" : :
"m" (real_mode_header->machine_real_restart_asm),
"D" (type));
#endif
The code switches to the trampoline_pgd, which unmaps the direct mapping
and also the kernel stack. The call to cr4_clear_bits() will find no
stack and crash the machine. The real_mode_header pointer below points
into the direct mapping, and dereferencing it also causes a crash.
The reason this does not crash always is only that kernel mappings are
global and the CR3 switch does not flush those mappings. But if theses
mappings are not in the TLB already, the above code will crash before it
can jump to the real-mode stub.
Extend the trampoline_pgd to contain all kernel mappings to prevent
these crashes and to make code which runs on this page-table more
robust.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211202153226.22946-5-joro@8bytes.org
Peter Zijlstra [Thu, 2 Dec 2021 20:45:34 +0000 (21:45 +0100)]
objtool: Fix pv_ops noinstr validation
Boris reported that in one of his randconfig builds, objtool got
infinitely stuck. Turns out there's trivial list corruption in the
pv_ops tracking when a function is both in a static table and in a code
assignment.
Avoid re-adding function to the pv_ops[] lists when they're already on
it.
Fixes:
db2b0c5d7b6f ("objtool: Support pv_opsindirect calls for noinstr")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20211202204534.GA16608@worktop.programming.kicks-ass.net
Linus Torvalds [Thu, 2 Dec 2021 22:38:54 +0000 (14:38 -0800)]
Merge tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit of an uptick in patch count this week, though it's all relatively
small overall.
I suspect msm has been queuing up a few fixes to skew it here.
Otherwise amdgpu has a scattered bunch of small fixes, and then some
vc4, i915.
virtio-gpu changes an rc1 introduced uAPI mistake, and makes it
operate more like other drivers. This should be fine as no userspace
relies on the behaviour yet.
Summary:
dma-buf:
- memory leak fix
msm:
- kasan found memory overwrite
- mmap flags
- fencing error bug
- ioctl NULL ptr
- uninit var
- devfreqless devices fix
- dsi lanes fix
- dp: avoid unpowered aux xfers
amdgpu:
- IP discovery based enumeration fixes
- vkms fixes
- DSC fixes for DP MST
- Audio fix for hotplug with tiled displays
- Misc display fixes
- DP tunneling fix
- DP fix
- Aldebaran fix
amdkfd:
- Locking fix
- Static checker fix
- Fix double free
i915:
- backlight regression
- Intel HDR backlight detection fix
- revert TGL workaround that caused hangs
virtio-gpu:
- switch back to drm_poll
vc4:
- memory leak
- error check fix
- HVS modesetting fixes"
* tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits)
Revert "drm/i915: Implement Wa_1508744258"
drm/amdkfd: process_info lock not needed for svm
drm/amdgpu: adjust the kfd reset sequence in reset sriov function
drm/amd/display: add connector type check for CRC source set
drm/amdkfd: fix double free mem structure
drm/amdkfd: set "r = 0" explicitly before goto
drm/amd/display: Add work around for tunneled MST.
drm/amd/display: Fix for the no Audio bug with Tiled Displays
drm/amd/display: Clear DPCD lane settings after repeater training
drm/amd/display: Allow DSC on supported MST branch devices
drm/amdgpu: Don't halt RLC on GFX suspend
drm/amdgpu: fix the missed handling for SDMA2 and SDMA3
drm/amdgpu: check atomic flag to differeniate with legacy path
drm/amdgpu: cancel the correct hrtimer on exit
drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID
drm/i915/dp: Perform 30ms delay after source OUI write
dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow
drm/i915: Add support for panels with VESA backlights with PWM enable/disable
drm/vc4: kms: Fix previous HVS commit wait
drm/vc4: kms: Don't duplicate pending commit
...
Dave Airlie [Thu, 2 Dec 2021 19:59:26 +0000 (05:59 +1000)]
Merge tag 'drm-intel-fixes-2021-12-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fixing a regression where the backlight brightness control stopped working.
- Fix the Intel HDR backlight support detection.
- Reverting a w/a to fix a gpu Hang in TGL. The w/a itself was also
for a hang, but in a much rarer scenario. The proper solution need
to be done with help from user space and it will be addressed later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yakf9hdnR5or+zNP@intel.com
Dave Airlie [Thu, 2 Dec 2021 19:57:11 +0000 (05:57 +1000)]
Merge tag 'drm-misc-fixes-2021-12-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Switch back to drm_poll for virtio, multiple fixes (memory leak,
improper error check, some functional fixes too) for vc4, memory leak
fix in dma-buf,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202084440.u3b7lbeulj7k3ltg@houat
Linus Torvalds [Thu, 2 Dec 2021 19:22:06 +0000 (11:22 -0800)]
Merge tag 'net-5.16-rc4' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and wireguard.
Mostly scattered driver changes this week, with one big clump in
mv88e6xxx. Nothing of note, really.
Current release - regressions:
- smc: keep smc_close_final()'s error code during active close
Current release - new code bugs:
- iwlwifi: various static checker fixes (int overflow, leaks, missing
error codes)
- rtw89: fix size of firmware header before transfer, avoid crash
- mt76: fix timestamp check in tx_status; fix pktid leak;
- mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set()
Previous releases - regressions:
- smc: fix list corruption in smc_lgr_cleanup_early
- ipv4: convert fib_num_tclassid_users to atomic_t
Previous releases - always broken:
- tls: fix authentication failure in CCM mode
- vrf: reset IPCB/IP6CB when processing outbound pkts, prevent
incorrect processing
- dsa: mv88e6xxx: fixes for various device errata
- rds: correct socket tunable error in rds_tcp_tune()
- ipv6: fix memory leak in fib6_rule_suppress
- wireguard: reset peer src endpoint when netns exits
- wireguard: improve resilience to DoS around incoming handshakes
- tcp: fix page frag corruption on page fault which involves TCP
- mpls: fix missing attributes in delete notifications
- mt7915: fix NULL pointer dereference with ad-hoc mode
Misc:
- rt2x00: be more lenient about EPROTO errors during start
- mlx4_en: update reported link modes for 1/10G"
* tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: dsa: b53: Add SPI ID table
gro: Fix inconsistent indenting
selftests: net: Correct case name
net/rds: correct socket tunable error in rds_tcp_tune()
mctp: Don't let RTM_DELROUTE delete local routes
net/smc: Keep smc_close_final rc during active close
ibmvnic: drop bad optimization in reuse_tx_pools()
ibmvnic: drop bad optimization in reuse_rx_pools()
net/smc: fix wrong list_del in smc_lgr_cleanup_early
Fix Comment of ETH_P_802_3_MIN
ethernet: aquantia: Try MAC address from device tree
ipv4: convert fib_num_tclassid_users to atomic_t
net: avoid uninit-value from tcp_conn_request
net: annotate data-races on txq->xmit_lock_owner
octeontx2-af: Fix a memleak bug in rvu_mbox_init()
net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
...
Linus Torvalds [Thu, 2 Dec 2021 19:07:41 +0000 (11:07 -0800)]
Merge tag 'trace-v5.16-rc3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three tracing fixes:
- Allow compares of strings when using signed and unsigned characters
- Fix kmemleak false positive for histogram entries
- Handle negative numbers for user defined kretprobe data sizes"
* tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kprobes: Limit max data_size of the kretprobe instances
tracing: Fix a kmemleak false positive in tracing_map
tracing/histograms: String compares should not care about signed values
Linus Torvalds [Thu, 2 Dec 2021 18:56:16 +0000 (10:56 -0800)]
Merge tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Some changes that went in 5.16 had issues. When working on the design
a piece was redesigned and things got missed. And the message type was
not being initialized when it was allocated, resulting in crashes.
In addition, the IPMI driver has had a shutdown issue where it could
still have an item in a system workqueue after it had been shutdown.
Move to a private workqueue to avoid that problem"
* tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi:
ipmi:ipmb: Fix unknown command response
ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking
ipmi: fix oob access due to uninit smi_msg type
ipmi: msghandler: Make symbol 'remove_work_wq' static
ipmi: Move remove_work to dedicated workqueue
Heiko Carstens [Fri, 26 Nov 2021 14:16:31 +0000 (15:16 +0100)]
s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
José Roberto de Souza [Fri, 19 Nov 2021 14:09:30 +0000 (06:09 -0800)]
Revert "drm/i915: Implement Wa_1508744258"
This workarounds are causing hangs, because I missed the fact that it
needs to be enabled for all cases and disabled when doing a resolve
pass.
So KMD only needs to whitelist it and UMD will be the one setting it
on per case.
This reverts commit
28ec02c9cbebf3feeaf21a59df9dfbc02bda3362.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes:
28ec02c9cbeb ("drm/i915: Implement Wa_1508744258")
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119140931.32791-1-jose.souza@intel.com
(cherry picked from commit
f3799ff16fcfacd44aee55db162830df461b631f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Frederic Weisbecker [Tue, 26 Oct 2021 14:10:55 +0000 (16:10 +0200)]
sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full
getrusage(RUSAGE_THREAD) with nohz_full may return shorter utime/stime
than the actual time.
task_cputime_adjusted() snapshots utime and stime and then adjust their
sum to match the scheduler maintained cputime.sum_exec_runtime.
Unfortunately in nohz_full, sum_exec_runtime is only updated once per
second in the worst case, causing a discrepancy against utime and stime
that can be updated anytime by the reader using vtime.
To fix this situation, perform an update of cputime.sum_exec_runtime
when the cputime snapshot reports the task as actually running while
the tick is disabled. The related overhead is then contained within the
relevant situations.
Reported-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Hasegawa Hitomi <hasegawa-hitomi@fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Acked-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20211026141055.57358-3-frederic@kernel.org
Frederic Weisbecker [Tue, 26 Oct 2021 14:10:54 +0000 (16:10 +0200)]
timers/nohz: Last resort update jiffies on nohz_full IRQ entry
When at least one CPU runs in nohz_full mode, a dedicated timekeeper CPU
is guaranteed to stay online and to never stop its tick.
Meanwhile on some rare case, the dedicated timekeeper may be running
with interrupts disabled for a while, such as in stop_machine.
If jiffies stop being updated, a nohz_full CPU may end up endlessly
programming the next tick in the past, taking the last jiffies update
monotonic timestamp as a stale base, resulting in an tick storm.
Here is a scenario where it matters:
0) CPU 0 is the timekeeper and CPU 1 a nohz_full CPU.
1) A stop machine callback is queued to execute somewhere.
2) CPU 0 reaches MULTI_STOP_DISABLE_IRQ while CPU 1 is still in
MULTI_STOP_PREPARE. Hence CPU 0 can't do its timekeeping duty. CPU 1
can still take IRQs.
3) CPU 1 receives an IRQ which queues a timer callback one jiffy forward.
4) On IRQ exit, CPU 1 schedules the tick one jiffy forward, taking
last_jiffies_update as a base. But last_jiffies_update hasn't been
updated for 2 jiffies since the timekeeper has interrupts disabled.
5) clockevents_program_event(), which relies on ktime_get(), observes
that the expiration is in the past and therefore programs the min
delta event on the clock.
6) The tick fires immediately, goto 3)
7) Tick storm, the nohz_full CPU is drown and takes ages to reach
MULTI_STOP_DISABLE_IRQ, which is the only way out of this situation.
Solve this with unconditionally updating jiffies if the value is stale
on nohz_full IRQ entry. IRQs and other disturbances are expected to be
rare enough on nohz_full for the unconditional call to ktime_get() to
actually matter.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20211026141055.57358-2-frederic@kernel.org
Florian Fainelli [Thu, 2 Dec 2021 04:17:20 +0000 (20:17 -0800)]
net: dsa: b53: Add SPI ID table
Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.
Fixes:
96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiapeng Chong [Thu, 2 Dec 2021 08:30:42 +0000 (16:30 +0800)]
gro: Fix inconsistent indenting
Eliminate the follow smatch warning:
net/ipv6/ip6_offload.c:249 ipv6_gro_receive() warn: inconsistent
indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zhijian [Thu, 2 Dec 2021 02:28:41 +0000 (10:28 +0800)]
selftests: net: Correct case name
ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names
Fixes:
34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Fixes:
75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
William Kucharski [Wed, 1 Dec 2021 14:45:22 +0000 (07:45 -0700)]
net/rds: correct socket tunable error in rds_tcp_tune()
Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would
instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched.
Fixes:
c6a58ffed536 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Johnston [Wed, 1 Dec 2021 08:07:42 +0000 (16:07 +0800)]
mctp: Don't let RTM_DELROUTE delete local routes
We need to test against the existing route type, not
the rtm_type in the netlink request.
Fixes:
83f0a0b7285b ("mctp: Specify route types, require rtm_type in RTM_*ROUTE messages")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lu [Wed, 1 Dec 2021 06:42:16 +0000 (14:42 +0800)]
net/smc: Keep smc_close_final rc during active close
When smc_close_final() returns error, the return code overwrites by
kernel_sock_shutdown() in smc_close_active(). The return code of
smc_close_final() is more important than kernel_sock_shutdown(), and it
will pass to userspace directly.
Fix it by keeping both return codes, if smc_close_final() raises an
error, return it or kernel_sock_shutdown()'s.
Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes:
606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 1 Dec 2021 05:48:36 +0000 (21:48 -0800)]
ibmvnic: drop bad optimization in reuse_tx_pools()
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes:
bbd809305bc7 ("ibmvnic: Reuse tx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sukadev Bhattiprolu [Wed, 1 Dec 2021 05:48:35 +0000 (21:48 -0800)]
ibmvnic: drop bad optimization in reuse_rx_pools()
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes:
489de956e7a2 ("ibmvnic: Reuse rx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dust Li [Wed, 1 Dec 2021 03:02:30 +0000 (11:02 +0800)]
net/smc: fix wrong list_del in smc_lgr_cleanup_early
smc_lgr_cleanup_early() meant to delete the link
group from the link group list, but it deleted
the list head by mistake.
This may cause memory corruption since we didn't
remove the real link group from the list and later
memseted the link group structure.
We got a list corruption panic when testing:
[ 231.277259] list_del corruption. prev->next should be
ffff8881398a8000, but was
0000000000000000
[ 231.278222] ------------[ cut here ]------------
[ 231.278726] kernel BUG at lib/list_debug.c:53!
[ 231.279326] invalid opcode: 0000 [#1] SMP NOPTI
[ 231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435
[ 231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
[ 231.281248] Workqueue: events smc_link_down_work
[ 231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90
[ 231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c
60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f>
0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc
[ 231.284146] RSP: 0018:
ffffc90000033d58 EFLAGS:
00010292
[ 231.284685] RAX:
0000000000000054 RBX:
ffff8881398a8000 RCX:
0000000000000000
[ 231.285415] RDX:
0000000000000001 RSI:
ffff88813bc18040 RDI:
ffff88813bc18040
[ 231.286141] RBP:
ffffffff8305ad40 R08:
0000000000000003 R09:
0000000000000001
[ 231.286873] R10:
ffffffff82803da0 R11:
ffffc90000033b90 R12:
0000000000000001
[ 231.287606] R13:
0000000000000000 R14:
ffff8881398a8000 R15:
0000000000000003
[ 231.288337] FS:
0000000000000000(0000) GS:
ffff88813bc00000(0000) knlGS:
0000000000000000
[ 231.289160] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 231.289754] CR2:
0000000000e72058 CR3:
000000010fa96006 CR4:
00000000003706f0
[ 231.290485] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 231.291211] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 231.291940] Call Trace:
[ 231.292211] smc_lgr_terminate_sched+0x53/0xa0
[ 231.292677] smc_switch_conns+0x75/0x6b0
[ 231.293085] ? update_load_avg+0x1a6/0x590
[ 231.293517] ? ttwu_do_wakeup+0x17/0x150
[ 231.293907] ? update_load_avg+0x1a6/0x590
[ 231.294317] ? newidle_balance+0xca/0x3d0
[ 231.294716] smcr_link_down+0x50/0x1a0
[ 231.295090] ? __wake_up_common_lock+0x77/0x90
[ 231.295534] smc_link_down_work+0x46/0x60
[ 231.295933] process_one_work+0x18b/0x350
Fixes:
a0a62ee15a829 ("net/smc: separate locks for SMCD and SMCR link group lists")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiayu Zhang [Wed, 1 Dec 2021 02:57:13 +0000 (10:57 +0800)]
Fix Comment of ETH_P_802_3_MIN
The description of ETH_P_802_3_MIN is misleading.
The value of EthernetType in Ethernet II frame is more than 0x0600,
the value of Length in 802.3 frame is less than 0x0600.
Signed-off-by: Xiayu Zhang <Xiayu.Zhang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tianhao Chai [Wed, 1 Dec 2021 02:57:06 +0000 (20:57 -0600)]
ethernet: aquantia: Try MAC address from device tree
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the
card, but instead need to obtain MAC addresses from the device tree. In
this case the hardware will report an invalid MAC.
Currently atlantic driver does not query the DT for MAC address and will
randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in.
This patch causes the driver to perfer a valid MAC address from OF (if
present) over HW self-reported MAC and only fall back to a random MAC
address when neither of them is valid.
Signed-off-by: Tianhao Chai <cth451@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 2 Dec 2021 02:26:35 +0000 (18:26 -0800)]
ipv4: convert fib_num_tclassid_users to atomic_t
Before commit
faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
changes to net->ipv4.fib_num_tclassid_users were protected by RTNL.
After the change, this is no longer the case, as free_fib_info_rcu()
runs after rcu grace period, without rtnl being held.
Fixes:
faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Gruenbacher [Tue, 30 Nov 2021 17:26:15 +0000 (18:26 +0100)]
gfs2: gfs2_create_inode rework
When gfs2_lookup_by_inum() calls gfs2_inode_lookup() for an uncached
inode, gfs2_inode_lookup() will place a new tentative inode into the
inode cache before verifying that there is a valid inode at the given
address. This can race with gfs2_create_inode() which doesn't check for
duplicates inodes. gfs2_create_inode() will try to assign the new inode
to the corresponding inode glock, and glock_set_object() will complain
that the glock is still in use by gfs2_inode_lookup's tentative inode.
We noticed this bug after adding commit
486408d690e1 ("gfs2: Cancel
remote delete work asynchronously") which allowed delete_work_func() to
race with gfs2_create_inode(), but the same race exists for
open-by-handle.
Fix that by switching from insert_inode_hash() to
insert_inode_locked4(), which does check for duplicate inodes. We know
we've just managed to to allocate the new inode, so an inode tentatively
created by gfs2_inode_lookup() will eventually go away and
insert_inode_locked4() will always succeed.
In addition, don't flush the inode glock work anymore (this can now only
make things worse) and clean up glock_{set,clear}_object for the inode
glock somewhat.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Andreas Gruenbacher [Mon, 29 Nov 2021 09:50:41 +0000 (10:50 +0100)]
gfs2: gfs2_inode_lookup rework
Rework gfs2_inode_lookup() to only set up the new inode's glocks after
verifying that the new inode is valid.
There is no need for flushing the inode glock work queue anymore now,
so remove that as well.
While at it, get rid of the useless wrapper around iget5_locked() and
its unnecessary is_bad_inode() check.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>