Sebastian Dröge [Wed, 22 Oct 2014 16:41:55 +0000 (18:41 +0200)]
interaudio: Use GST_DEBUG_OBJECT() instead of GST_DEBUG()
Sebastian Dröge [Wed, 22 Oct 2014 16:40:01 +0000 (18:40 +0200)]
interaudio: Properly pass through caps from the sink to the source
Otherwise a magic capsfilter after the source is required with
exactly the same caps as the input.
Sebastian Dröge [Wed, 22 Oct 2014 16:13:36 +0000 (18:13 +0200)]
inter: Clean up surfaces after the last user is gone
Sebastian Dröge [Wed, 22 Oct 2014 16:07:00 +0000 (18:07 +0200)]
inter: Whitespace cleanup
Sebastian Dröge [Wed, 22 Oct 2014 16:03:13 +0000 (18:03 +0200)]
intervideo: Properly pass through caps from the sink to the source
Otherwise a magic capsfilter after the source is required with
exactly the same caps as the input.
This would've failed before with invalid buffer sizes:
gst-launch-1.0 videotestsrc ! intervideosink intervideosrc ! "video/x-raw,width=640,height=480" ! xvimagesink
Sebastian Dröge [Wed, 22 Oct 2014 13:07:04 +0000 (15:07 +0200)]
rawparse: Check for 0-size after adjusting the size for the frame size
If we don't have a complete raw audio frame we would otherwise still
ask for a 0 sized buffer from the adapter.
Sebastian Dröge [Wed, 22 Oct 2014 12:43:50 +0000 (14:43 +0200)]
rawparse: Don't try to retrieve 0 byte buffers from the adapter in multi-frame mode
Tim-Philipp Müller [Wed, 22 Oct 2014 12:03:30 +0000 (13:03 +0100)]
configure: improve openh264 check
The openh264 API is still unstable, so check for
structure member that we need to prevent building
against an older incompatible version.
Tim-Philipp Müller [Wed, 22 Oct 2014 11:36:36 +0000 (12:36 +0100)]
configure: simplify openh264 check
Of course PTHREADS_CFLAGS is not used anywhere now
for the check, but that was the case before as well.
Sebastian Dröge [Tue, 21 Oct 2014 14:21:08 +0000 (16:21 +0200)]
gl/cocoa: Fix compiler warning
gstglwindow_cocoa.m: In function '-[GstGLNSView drawRect:]':
gstglwindow_cocoa.m:555: warning: 'GstGLNSView' may not respond to '-reshape'
gstglwindow_cocoa.m:555: warning: (Messages without a matching method signature
gstglwindow_cocoa.m:555: warning: will be assumed to return 'id' and accept
gstglwindow_cocoa.m:555: warning: '...' as arguments.)
Sebastian Dröge [Tue, 21 Oct 2014 13:42:32 +0000 (15:42 +0200)]
vtenc: Fix locking
The object lock only protects the session, as we modify
the session from other threads when the bitrate property
is changed. Don't hold it much longer than for session
related things.
And we need to release the video decoder stream lock before
enqueueing a frames. It might wait for our callback to dequeue
a frame from another thread, which will then take the stream
lock too and deadlock.
Tim-Philipp Müller [Tue, 21 Oct 2014 12:01:45 +0000 (13:01 +0100)]
Automatic update of common submodule
From a8c8939 to 84d06cd
Stefan Sauer [Tue, 21 Oct 2014 11:28:50 +0000 (13:28 +0200)]
configure: use a macro to check for pthread
Replace the hardcoded -lpthread in most of the places with $PTHREAD_LIBS. For
openh264 also add $PTHREAD_LIBS to OPENH264_LIBS until upstream ships a .pc
file.
Stefan Sauer [Tue, 21 Oct 2014 10:58:39 +0000 (12:58 +0200)]
Automatic update of common submodule
From 36388a1 to a8c8939
Matthieu Bouron [Tue, 21 Oct 2014 10:39:14 +0000 (12:39 +0200)]
hlsdemux: reset end_of_playlist attribute when we receive a seek
https://bugzilla.gnome.org/show_bug.cgi?id=738696
Vineeth T M [Mon, 20 Oct 2014 12:55:08 +0000 (18:25 +0530)]
audiomixer: critical error for blocksize, timeout min/max values
Audiomixer blocksize, cant be 0, hence adjusting the minimum value to 1
timeout value of aggregator is defined with MAX of MAXINT64,
but it cannot cross G_MAXLONG * GST_SECOND - 1
Hence changed the max value of the same
https://bugzilla.gnome.org/show_bug.cgi?id=738845
Matthew Waters [Mon, 20 Oct 2014 19:04:10 +0000 (06:04 +1100)]
glmixer: fixup eglimage include path
Matthew Waters [Mon, 20 Oct 2014 15:52:05 +0000 (02:52 +1100)]
videoaggregator: fixate the parts of the caps we don't know how to deal with
fixes glvideomixer with video/x-raw,width=foo i.e. no format field.
Matthew Waters [Sat, 18 Oct 2014 08:03:43 +0000 (10:03 +0200)]
glbufferpool: add the GstVideoGLTextureUploadMeta buffer pool option
Matthew Waters [Sun, 19 Oct 2014 23:34:27 +0000 (10:34 +1100)]
videoaggregator: operate on caps rather than video info
Otherwise the CapsFeatures will be lost along with the possibility
of multiple output types and formats.
https://bugzilla.gnome.org/show_bug.cgi?id=738129
Aurélien Zanelli [Fri, 19 Sep 2014 09:37:56 +0000 (11:37 +0200)]
vc1parse: introduce a helper to make sequence-layer
It will be useful to implement stream-format conversion.
https://bugzilla.gnome.org/show_bug.cgi?id=738526
Brendan Long [Mon, 20 Oct 2014 08:27:15 +0000 (02:27 -0600)]
gl: Check for GLU before trying to use it in configure.ac
https://bugzilla.gnome.org/show_bug.cgi?id=738816
Wang Xin-yu (王昕宇) [Mon, 20 Oct 2014 07:02:28 +0000 (15:02 +0800)]
glcolorconvert: support RGB16/BGR16 video format upload
https://bugzilla.gnome.org/show_bug.cgi?id=738842
Aurélien Zanelli [Thu, 9 Oct 2014 13:12:01 +0000 (15:12 +0200)]
vc1parser: fix expected level in sequence-layer parsing unit test
Sequence-layer used for unit test have a level set to 2 which should
match the medium level, not the high.
https://bugzilla.gnome.org/show_bug.cgi?id=738230
Aurélien Zanelli [Thu, 9 Oct 2014 13:05:55 +0000 (15:05 +0200)]
vc1parser: fix level values for simple/main profile
In simple profile, level set to 0 or 2 indicate low and medium level
respectively. In main profile, level set to 0, 2 or 4 indicate low,
medium and high level respectively.
Level values are defined in Annex J.1.2 of the SMPTE 421M.
https://bugzilla.gnome.org/show_bug.cgi?id=738230
Tim-Philipp Müller [Sat, 2 Aug 2014 10:29:37 +0000 (11:29 +0100)]
tsdemux: send initial GAP event on sparse streams for faster startup with playbin
Signal sparse streams properly in stream-start event and force sending
of pending sticky events which have been stored on the pad already and
which otherwise would only be sent on the first buffer or serialized
event (which means very late in case of subtitle streams). Playsink in
playbin waits for stream-start or another serialized event, and if we
don't do this it will wait for the multiqueue to run full before
starting playback, which might take a couple of seconds.
https://bugzilla.gnome.org/show_bug.cgi?id=734040
Edward Hervey [Mon, 20 Oct 2014 10:30:50 +0000 (12:30 +0200)]
tsdemux: GAP detection
All pads of a stream are now added at the beginning. In order to cope with
streams that don't get any data (forever or for a long time) we detect gaps
and push out GAP events when needed.
Cleanups and commenting by Jan Schmidt <jan@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=734040
Aurélien Zanelli [Wed, 1 Oct 2014 14:17:46 +0000 (16:17 +0200)]
vc1parse: select caps according to wmv format at negotiation
Some VC1 decoder can have different caps according to wmv format, ie
WMV3 or WVC1.
So instead of keeping the first available caps, we interserct with
current WMV format.
https://bugzilla.gnome.org/show_bug.cgi?id=738532
Stefan Sauer [Mon, 20 Oct 2014 09:22:54 +0000 (11:22 +0200)]
configure: add pthread to the configure check for openh264
Sebastian Dröge [Mon, 20 Oct 2014 07:47:27 +0000 (09:47 +0200)]
rtmpsink: Declare sink variable that was forgotten in last commit
Havard Graff [Sun, 19 Oct 2014 18:35:41 +0000 (20:35 +0200)]
rtmpsink: Free URI string in finalize()
https://bugzilla.gnome.org/show_bug.cgi?id=738674
Brion Vibber [Sat, 18 Oct 2014 04:26:52 +0000 (21:26 -0700)]
gl/cocoa: Fix for building on Mac OS X 10.10
Using NSApp directly seems to confuse something, as the compiler
was expecting an id<NSFileManagerDelegate>. Switched to using
[NSApplication sharedApplication], and specified the delegate
protocol on the window class as well.
https://bugzilla.gnome.org/show_bug.cgi?id=738740
Sebastian Dröge [Sun, 19 Oct 2014 12:57:43 +0000 (14:57 +0200)]
vtenc: Use kVTProfileLevel_H264_Baseline_AutoLevel only on iOS
It is not required on OSX apparently and was only added in 10.9.6 there.
Calculating the correct level from the configuration is not trivial, so let's
just not set a level at all here.
Sebastian Dröge [Sun, 19 Oct 2014 12:51:40 +0000 (14:51 +0200)]
vtenc: VTCompressionSessionPrepareToEncodeFrames only exists since 10.9.6
Check with configure for it instead of using one of the availability macros
as those wouldn't work as expected with minor versions.
Sebastian Dröge [Sun, 19 Oct 2014 12:32:31 +0000 (14:32 +0200)]
vtenc: Remove unused #define
Sebastian Dröge [Sun, 19 Oct 2014 11:44:38 +0000 (13:44 +0200)]
rtpbad: Fix make dist by removing non-existing file from EXTRA_DIST
It's used by the rtp plugin in gst-plugins-good for VP8 but not needed
or used here.
Thijs Vermeir [Fri, 17 Oct 2014 14:51:27 +0000 (16:51 +0200)]
rtpbad: include plugins base cflags (fix build on jenkins)
Thijs Vermeir [Thu, 16 Oct 2014 08:34:01 +0000 (10:34 +0200)]
rtp: add h265 RTP payloader + depayloader
Stefan Sauer [Wed, 15 Oct 2014 13:25:55 +0000 (15:25 +0200)]
curlbasesink: strip newlines from curl debug messages
The messages we receive in the custom log handler might end with a newline and
are not \0 terminated. Copy the messages, trim and terminate them.
Stefan Sauer [Wed, 15 Oct 2014 13:24:12 +0000 (15:24 +0200)]
curlbasesink: small code cleanup
Use a local var and save a local var.
Thijs Vermeir [Wed, 15 Oct 2014 14:52:09 +0000 (16:52 +0200)]
tests/x265enc: add simple unit test
Thijs Vermeir [Wed, 5 Mar 2014 15:39:30 +0000 (16:39 +0100)]
x265enc: add x265 encoder element
Matthew Waters [Tue, 14 Oct 2014 12:00:11 +0000 (14:00 +0200)]
gldeinterlace: ref the uploaded buffer
Instead of the possibly non-GL input buffer.
Matthew Waters [Tue, 14 Oct 2014 14:41:51 +0000 (16:41 +0200)]
glfilter: add uploaded_buffer field
Aurélien Zanelli [Mon, 22 Sep 2014 07:44:14 +0000 (09:44 +0200)]
vc1parse: parse frame header when stream format is ASF/raw for simple/main profile
When stream-format is ASF or sequence-layer-raw-frame, we basically have
a raw frame so we can parse it to extract some information such the
keyframe flag. The only requirement is to have a valid sequence-header.
This commit parse the frame header and set the DELTA_UNIT buffer flag in
case the frame is not a keyframe.
https://bugzilla.gnome.org/show_bug.cgi?id=738519
Sebastian Dröge [Tue, 14 Oct 2014 08:51:22 +0000 (10:51 +0200)]
libde265: Change rank to SECONDARY, gst-libav has PRIMARY rank
Joachim Bauch [Wed, 17 Sep 2014 08:38:44 +0000 (10:38 +0200)]
Integrate libde265 into gst-plugins-bad.
Aurélien Zanelli [Mon, 13 Oct 2014 12:05:24 +0000 (14:05 +0200)]
vc1parse: just assume none header-format when no codec_data is present
https://bugzilla.gnome.org/show_bug.cgi?id=738449
Sebastian Dröge [Tue, 14 Oct 2014 07:19:59 +0000 (09:19 +0200)]
vtdec: Set reorder length to 0 if we can't calculate it
Instead of leaving it at whatever value it had before.
Sebastian Dröge [Mon, 13 Oct 2014 11:28:57 +0000 (13:28 +0200)]
glimagesink: Only finalize the other context in finalize()
Otherwise we change a value of a property when going to READY state,
which is unexpected behaviour.
Sebastian Dröge [Mon, 13 Oct 2014 11:27:55 +0000 (13:27 +0200)]
glmixer: Call the pad's parent class finalize method
Sebastian Dröge [Mon, 13 Oct 2014 11:27:11 +0000 (13:27 +0200)]
glmixer: Only finalize the other context in finalize()
Otherwise we change a value of a property when going to READY state,
which is unexpected behaviour.
Sebastian Dröge [Mon, 13 Oct 2014 11:25:42 +0000 (13:25 +0200)]
gltestsrc: Add other-context property
Sebastian Dröge [Mon, 13 Oct 2014 09:56:03 +0000 (11:56 +0200)]
glimagesink: Don't leak other-context
Sebastian Dröge [Mon, 13 Oct 2014 09:53:47 +0000 (11:53 +0200)]
glmixer: Add other-context property
Reynaldo H. Verdejo Pinochet [Mon, 13 Oct 2014 00:25:16 +0000 (21:25 -0300)]
dvb: make interleaving a prop and proxy on dvbbasebin
DTV_INTERLEAVING is currently used only for DTBM. This is
congruent with the v4l dvb API where the different interleaving
modes where added for v5.7
Reynaldo H. Verdejo Pinochet [Sun, 12 Oct 2014 21:30:38 +0000 (18:30 -0300)]
dvbsrc: add transmission mode checks for DVB-T/T2
These and every sanity check leading to a warning
(we have a few in place) should come handy when
debuging failed tunning scenarios.
Reynaldo H. Verdejo Pinochet [Sun, 12 Oct 2014 16:34:09 +0000 (13:34 -0300)]
dvbsrc: docs, drop v5 API change history comments < .5
We only support from minor 5 and up now. Also add a
note about the recently added preliminar DTMB support.
Reynaldo H. Verdejo Pinochet [Sun, 12 Oct 2014 16:08:13 +0000 (13:08 -0300)]
dvbsrc: add missing DVB-T2 bandwidth types
DVB-T2 supports 5, 10 and 1.712 MHz
Order of the enum values (new values after _AUTO)
has been kept congruent with the one in the v4l
API for consistency
Benjamin Gaignard [Tue, 7 Oct 2014 08:37:33 +0000 (10:37 +0200)]
waylandsink: do not render twice the same buffer
Do not try to render a buffer that is already being rendered.
This happens typically during the initial rendering stage as the first
buffer is rendered twice: first by preroll(), then by render().
This commit avoids this assertion failure:
CRITICAL: gst_wayland_compositor_acquire_buffer: assertion
'meta->used_by_compositor == FALSE' failed
https://bugzilla.gnome.org/show_bug.cgi?id=738069
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tifaine Inguere [Thu, 24 Jul 2014 14:53:53 +0000 (16:53 +0200)]
waylandsink : Allow surface to catch input events
If waylandsink is the owner of the display then it is in charge
of catching input events on the surface.
https://bugzilla.gnome.org/show_bug.cgi?id=733682
Signed-off-by: Tifaine Inguere <tifaine.inguere@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
George Kiagiadakis [Wed, 2 Jul 2014 10:29:55 +0000 (13:29 +0300)]
waylandsink: take into account the case where a pool may be destroyed together with GstWlDisplay
There are two cases covered here:
1) The GstWlDisplay forces the release of the last buffer and the pool
gets destroyed in this context, which means it unregisters all the
other buffers from the GstWlDisplay as well and the display->buffers
hash table gets corrupted because it is iterating.
2) The pool and its buffers get destroyed concurrently from another
thread while GstWlDisplay is finalizing and many things get corrupted.
George Kiagiadakis [Tue, 1 Jul 2014 08:43:20 +0000 (11:43 +0300)]
waylandsink: stack the video subsurface into another subsurface that covers the whole render rectangle
The main reason behind this is that when the video caps change and the video
subsurface needs to resize and change position, the wl_subsurface.set_position
call needs a commit in its parent in order to take effect. Previously,
the parent was the application's surface, over which there is no control.
Now, the parent is inside the sink, so we can commit it and change size smoothly.
As a side effect, this also allows the sink to draw its black borders on
its own, without the need for the application to do that. And another side
effect is that this can now allow resizing the sink when it is in top-level
mode and have it respect the aspect ratio.
George Kiagiadakis [Fri, 20 Jun 2014 13:24:36 +0000 (16:24 +0300)]
waylandsink: rename video format conversion functions to indicate they are about wl_shm
Needed to add linux_dmabuf format conversion functions later
George Kiagiadakis [Mon, 23 Jun 2014 14:27:01 +0000 (17:27 +0300)]
waylandsink: remove the ugly gst_wl_display_stop() now that this mechanism is not needed anymore
Because we no longer have a custom buffer pool that holds a reference
to the display, there is no way for a cyclic reference to happen like
before, so we no longer need to explicitly call a function from the
display to release the wl_buffers.
However, the general mechanism of registering buffers to the display
and forcibly releasing them when the display is destroyed is still
needed to avoid potential memory leaks. The comment in wlbuffer.c
is updated to reflect the current situation.
George Kiagiadakis [Mon, 23 Jun 2014 13:40:02 +0000 (16:40 +0300)]
waylandsink: replace the custom buffer pool with an allocator
This reduces the complexity of having a custom buffer pool, as
we don't really need it. We only need the custom allocation part.
And since the wl_buffer is no longer saved in a GstMeta, we can
create it and add it on the buffers in the sink's render()
function, which removes the reference cycle caused by the pool
holding a reference to the display and also allows more generic
scenarios (the allocator being used in another pool, or buffers
being allocated without a pool [if anything stupid does that]).
This commit also simplifies the propose_allocation() function,
which doesn't really need to do all these complicated checks,
since there is always a correct buffer pool available, created
in set_caps().
The other side effect of this commit is that a new wl_shm_pool
is now created for every GstMemory, which means that we use
as much shm memory as we actually need and no more. Previously,
the created wl_shm_pool would allocate space for 15 buffers, no
matter if they were being used or not.
George Kiagiadakis [Fri, 20 Jun 2014 11:47:57 +0000 (14:47 +0300)]
waylandsink: rework the mechanism for keeping buffers out of the pool until wl_buffer::release
This also removes the GstWlMeta and adds a wrapper class for wl_buffer
which is saved in the GstBuffer qdata instead of being a GstMeta.
The motivation behind this is mainly to allow attaching wl_buffers on
GstBuffers that have not been allocated inside the GstWaylandBufferPool,
so that if for example an upstream element is sending us a buffer
from a different pool, which however does not need to be copied
to a buffer from our pool because it may be a hardware buffer
(hello dmabuf!), we can create a wl_buffer directly from it and first,
attach it on it so that we don't have to re-create a wl_buffer every
time the same GstBuffer arrives and second, force the whole mechanism
for keeping the buffer out of the pool until there is a wl_buffer::release
on that foreign GstBuffer.
Vineeth T M [Thu, 9 Oct 2014 02:50:15 +0000 (08:20 +0530)]
schrodec: optimize parse logic
Header will be read each and everytime parse function will be called
which is not necessary since until we have complete data,
we need not parse the header again.
https://bugzilla.gnome.org/show_bug.cgi?id=737984
Tim-Philipp Müller [Fri, 10 Oct 2014 12:05:49 +0000 (13:05 +0100)]
fluiddec: don't leak incoming caps event
https://bugzilla.gnome.org/show_bug.cgi?id=738291
Aurélien Zanelli [Thu, 9 Oct 2014 16:18:02 +0000 (18:18 +0200)]
vc1parse: fix framesize when input is frame-layer
frame-layer header is represented as a sequence of 32 bit unsigned
integer serialized in little-endian byte order, so framesize is on the
first 3 bytes.
SMPTE 421M Annex L.
https://bugzilla.gnome.org/show_bug.cgi?id=738243
Antonio Ospite [Tue, 7 Oct 2014 15:05:04 +0000 (17:05 +0200)]
midiparse: mention fluiddec instead of fluidsynth
The element name is actually fluiddec even if it uses fluidsynth.
https://bugzilla.gnome.org/show_bug.cgi?id=738223
Antonio Ospite [Thu, 9 Oct 2014 09:51:16 +0000 (11:51 +0200)]
fluiddec: fix some memory leaks
https://bugzilla.gnome.org/show_bug.cgi?id=738223
David Woodhouse [Thu, 9 Oct 2014 08:11:00 +0000 (04:11 -0400)]
pcapparse: Add support for LINKTYPE_RAW
Also, strictly speaking, these numbers aren't DLT_*; they are LINKTYPE_* because
libpcap translates from internal OS-specific DLT_ numbering to the portable
LINKTYPE_ number space when writing files.
https://bugzilla.gnome.org/show_bug.cgi?id=738206
Aurélien Zanelli [Thu, 9 Oct 2014 12:51:56 +0000 (14:51 +0200)]
test: use G_GSIZE_FORMAT in audiomixer test
https://bugzilla.gnome.org/show_bug.cgi?id=738227
Matthew Waters [Tue, 7 Oct 2014 05:57:27 +0000 (16:57 +1100)]
tests/aggregator: add timeout handling test for the timeout parameter
Matthew Waters [Mon, 6 Oct 2014 10:46:24 +0000 (21:46 +1100)]
aggregator: add latency query handling
Matthew Waters [Mon, 6 Oct 2014 07:33:52 +0000 (18:33 +1100)]
videoaggregator: support unresponsive pads
Render unresponsive pads with the last video frame received.
Matthew Waters [Mon, 6 Oct 2014 07:23:03 +0000 (18:23 +1100)]
aggregator: add a timeout property determining buffer wait time
Determines the amount of time that a pad will wait for a buffer before
being marked unresponsive.
Network sources may fail to produce buffers for an extended period of time,
currently causing the pipeline to stall possibly indefinitely, waiting for
these buffers to appear.
Subclasses should render unresponsive pads with either silence (audio), the
last (video) frame or what makes the most sense in the given context.
Matthew Waters [Mon, 6 Oct 2014 07:10:38 +0000 (18:10 +1100)]
videoaggregator: remove the use of the queued buffer on sink pads
That data is now held by the aggregator class
Sebastian Dröge [Thu, 9 Oct 2014 08:46:23 +0000 (11:46 +0300)]
h265parse: expose parsed profile, tier and level to downstream
https://bugzilla.gnome.org/show_bug.cgi?id=732239
Sreerenj Balachandran [Wed, 8 Oct 2014 22:18:16 +0000 (01:18 +0300)]
h264parse: expose parsed profile and level to downstream
Set parsed profile and level in src caps.
https://bugzilla.gnome.org/show_bug.cgi?id=732239
Sebastian Dröge [Thu, 9 Oct 2014 07:54:35 +0000 (10:54 +0300)]
gl/cocoa: Add support for HiDPI displays
Without this our GL surface would be upscaled after rendering
by Cocoa, which would reduce image quality.
Matthew Waters [Thu, 9 Oct 2014 01:28:11 +0000 (12:28 +1100)]
glcolorconvert: output why we cannot convert a buffer
Matthew Waters [Thu, 9 Oct 2014 01:25:55 +0000 (12:25 +1100)]
glcolorconvert: fix planar YUV download
- sample the u and v planes properly
- output the correctly scaled u and v planes for different chroma block sizes
Vivia Nikolaidou [Wed, 8 Oct 2014 18:51:12 +0000 (21:51 +0300)]
gloverlay: And fix another unused variable compiler warning
Vivia Nikolaidou [Wed, 8 Oct 2014 18:49:25 +0000 (21:49 +0300)]
gloverlay: Fix unused variable compiler warning when compiling without desktop GL
Anuj Jaiswal [Fri, 26 Sep 2014 08:25:20 +0000 (13:55 +0530)]
zbar: Add YVU9 and YUV9 to ZBAR_YUV_CAPS
https://bugzilla.gnome.org/show_bug.cgi?id=737407
Wang Xin-yu (王昕宇) [Sun, 28 Sep 2014 02:51:09 +0000 (10:51 +0800)]
gltestsrc: implement checkers pattern with GLSL
https://bugzilla.gnome.org/show_bug.cgi?id=737505
Sebastian Dröge [Tue, 7 Oct 2014 12:24:10 +0000 (15:24 +0300)]
hlsdemux: Fix M3U8 parsing unit test after API changes
Thomas Bluemel [Thu, 2 Oct 2014 16:37:57 +0000 (10:37 -0600)]
hlsdemux: Fix accessing invalidated memory
In gst_hls_demux_get_next_fragment() the next fragment URI gets
stored in next_fragment_uri, but the gst_hls_demux_updates_loop()
can at any time update the playlist, rendering this string invalid.
Therefore, any data (like key, iv, URIs) that is taken from a
GstM3U8Client needs to be copied. In addition, accessing the
internals of a GstM3U8Client requires locking.
https://bugzilla.gnome.org/show_bug.cgi?id=737793
Felix Schwarz [Tue, 7 Oct 2014 10:12:04 +0000 (12:12 +0200)]
mpegts: fix typos in comments
https://bugzilla.gnome.org/show_bug.cgi?id=738072
Matthew Waters [Tue, 7 Oct 2014 12:04:30 +0000 (23:04 +1100)]
glcolorconvert: fix UYVY download green screen
Matthew Waters [Tue, 7 Oct 2014 11:50:22 +0000 (22:50 +1100)]
glcolrconvert: fix YUY2 download
- The shader was outputing the wrong values compared with raw
videotestsrc.
- deal with the texture edge properly.
- properly sample the 2x1 rectangle for the u and v values
- don't double sample the y value
Vivia Nikolaidou [Mon, 6 Oct 2014 18:25:30 +0000 (21:25 +0300)]
curlsmtpsink: Set CURLOPT_UPLOAD to 1 to not use VRFY and other unneeded commands
Fixes the sink with SMTP servers that disable VRFY for spam protection.
http://sourceforge.net/p/curl/bugs/1389/
Jan Alexander Steffens (heftig) [Wed, 17 Sep 2014 14:48:02 +0000 (16:48 +0200)]
aggregator: Replace GMainContext with GAsyncQueue (v2)
The previous implementation kept accumulating GSources,
slowing down the iteration and leaking memory.
Instead of trying to fix the main context flushing, replace
it with a GAsyncQueue which is simple to flush and has
less overhead.
https://bugzilla.gnome.org/show_bug.cgi?id=736782
Thibault Saunier [Mon, 6 Oct 2014 11:09:00 +0000 (13:09 +0200)]
audiomixer: Handle seek event in READY state
Thibault Saunier [Mon, 21 Jul 2014 09:07:19 +0000 (11:07 +0200)]
audiomixer: Set the sinkpad segments basetime after seeking
Otherwise stream offset and running time comparison will not be
correct, leading to segfaults after seeks
Thibault Saunier [Wed, 28 May 2014 14:29:37 +0000 (16:29 +0200)]
audiomixer: Port to GstAggregator
https://bugzilla.gnome.org/show_bug.cgi?id=737183
Co-Authored by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Thibault Saunier [Tue, 23 Sep 2014 13:59:10 +0000 (15:59 +0200)]
videoaggregator: Do not wrongly set the aggregator.segment
The aggregator.segment is not to be initialized by the subclasses but
by the aggregator itself. Moreover, initializing it on start would make
us loose the information coming from the initial seek.
Thibault Saunier [Wed, 30 Jul 2014 09:57:46 +0000 (11:57 +0200)]
videoaggregator: Make sure not to unref a NULL pointer