Sanghee Kim [Fri, 30 Apr 2010 05:19:36 +0000 (14:19 +0900)]
recovery: onenand: add lock-tight
Sanghee Kim [Fri, 30 Apr 2010 04:37:46 +0000 (13:37 +0900)]
onenand: add lock-tight and lock check
SangHee Kim [Wed, 28 Apr 2010 12:31:53 +0000 (21:31 +0900)]
recovery: code clean up
Lukasz Majewski [Wed, 28 Apr 2010 08:23:47 +0000 (10:23 +0200)]
s5pv210:P1P2:deep_idle deep_idle support for P1P2
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 27 Apr 2010 05:40:31 +0000 (14:40 +0900)]
s5pc1xx: kessler: fix memory init for ACME SDK board
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
SangHee Kim [Mon, 26 Apr 2010 10:56:49 +0000 (19:56 +0900)]
recovery: modify the license
SangHee Kim [Mon, 26 Apr 2010 05:39:45 +0000 (14:39 +0900)]
recovery: serial: typo correct
SangHee Kim [Mon, 26 Apr 2010 05:29:56 +0000 (14:29 +0900)]
recovery: serial: add driver
mv common.h to recovery.h
SangHee Kim [Fri, 23 Apr 2010 08:34:58 +0000 (17:34 +0900)]
recovery: edit config.mk
SangHee Kim [Fri, 23 Apr 2010 06:06:19 +0000 (15:06 +0900)]
recovery: add build dependency for library
SangHee Kim [Fri, 23 Apr 2010 05:40:41 +0000 (14:40 +0900)]
recovery: code trimming
all configs are merged to '$(RECOVERY_BLOCK)/config.mk'
SangHee Kim [Fri, 23 Apr 2010 05:32:15 +0000 (14:32 +0900)]
recovery: code trimming
all configs are merged to '$(RECOVERY_BLOCK)\config.mk'
Minkyu Kang [Thu, 22 Apr 2010 05:27:23 +0000 (14:27 +0900)]
recovery: move usb related codes to driver/usb
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 21 Apr 2010 07:27:33 +0000 (16:27 +0900)]
recovery: usbd: remove unused defines
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 21 Apr 2010 04:48:12 +0000 (13:48 +0900)]
recovery: code clean up (don't use the DOS file format)
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
SangHee Kim [Tue, 20 Apr 2010 06:00:35 +0000 (15:00 +0900)]
recovery: Makefile clean up
SangHee Kim [Tue, 20 Apr 2010 02:04:38 +0000 (11:04 +0900)]
Makefile: rollback
SangHee Kim [Tue, 20 Apr 2010 01:52:43 +0000 (10:52 +0900)]
recovery: code clean up
SangHee Kim [Mon, 19 Apr 2010 09:05:31 +0000 (18:05 +0900)]
recovery: restructure the recovery source tree, add new files
SangHee Kim [Mon, 19 Apr 2010 09:02:19 +0000 (18:02 +0900)]
recovery: restructure the recovery source tree, modify OneNAND driver
Joonyoung Shim [Mon, 19 Apr 2010 04:44:58 +0000 (13:44 +0900)]
s5pc110: universal: Enable always_resume
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Minkyu Kang [Fri, 16 Apr 2010 08:28:18 +0000 (17:28 +0900)]
recovery: usbd: set recovery mode handshake word
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 16 Apr 2010 00:14:10 +0000 (09:14 +0900)]
s5pc110: change APLL lock time to 30us
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 15 Apr 2010 10:45:14 +0000 (19:45 +0900)]
recovery: universal: support the usb downloader
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 15 Apr 2010 10:43:02 +0000 (19:43 +0900)]
gitignore: update for recovery
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 13 Apr 2010 07:28:19 +0000 (16:28 +0900)]
recovery: remove the wrong comment
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Joonyoung Shim [Mon, 12 Apr 2010 02:10:58 +0000 (11:10 +0900)]
s5pc110: universal: Change size for fastboot to 60Mbyte
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 05:56:59 +0000 (14:56 +0900)]
recovery: modify text base and load address
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 04:45:35 +0000 (13:45 +0900)]
build: update for recovery block
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 04:41:18 +0000 (13:41 +0900)]
s5pc1xx: universal: set correct boot part size
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 04:28:31 +0000 (13:28 +0900)]
recovery: initial support the recovery block
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 04:25:21 +0000 (13:25 +0900)]
gitignore: update
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 04:08:10 +0000 (13:08 +0900)]
recovery: fix ifdef condition
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 01:54:14 +0000 (10:54 +0900)]
recovery: BUGFIX: fix boot fail problem
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 01:12:40 +0000 (10:12 +0900)]
recovery: make dependency rule correctly
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 9 Apr 2010 00:27:09 +0000 (09:27 +0900)]
recovery: add some comments
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 8 Apr 2010 12:30:47 +0000 (21:30 +0900)]
recovery: initial commit (DON'T USE IT!!)
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 8 Apr 2010 11:39:00 +0000 (20:39 +0900)]
s5pc1xx: universal: fix env offset
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 8 Apr 2010 10:43:24 +0000 (19:43 +0900)]
ARM Cortex-a8: onenand_ipl: modify ifdef to if defined
prepare for recovery boot
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 8 Apr 2010 10:42:46 +0000 (19:42 +0900)]
s5pc1xx: universal: increase the bootloader partition
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Donggeun Kim [Thu, 8 Apr 2010 09:28:34 +0000 (18:28 +0900)]
s5pc110:bamboo:set number of evt
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Kyungmin Park [Thu, 8 Apr 2010 03:23:18 +0000 (12:23 +0900)]
s5pc110: aquila: Add UBIFS support when UBI on
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Wed, 7 Apr 2010 06:23:56 +0000 (15:23 +0900)]
universal: change printf function to puts function
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 7 Apr 2010 04:28:58 +0000 (13:28 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Wed, 7 Apr 2010 04:28:21 +0000 (13:28 +0900)]
s5pc1xx: sleep: unlock all OneNand blocks when waked up
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Mon, 5 Apr 2010 12:09:49 +0000 (21:09 +0900)]
s5pc110: aquila: Disable ABB block to reduce the sleep current
It's happend at low temperature condition
It goes 1.x mA without this patch
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
daeinki [Fri, 2 Apr 2010 05:22:55 +0000 (14:22 +0900)]
s5pc110: fb: changed source clock frequency for fimd to 222MHz.
Signed-off-by: daeinki <inki.dae@samsung.com>
Kyungmin Park [Fri, 2 Apr 2010 01:34:07 +0000 (10:34 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Fri, 2 Apr 2010 00:58:22 +0000 (09:58 +0900)]
Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Fri, 2 Apr 2010 00:50:42 +0000 (09:50 +0900)]
Merge branch 'master' of git://git.denx.de/u-boot
Wolfgang Denk [Thu, 1 Apr 2010 09:28:32 +0000 (11:28 +0200)]
Merge branch 'next'
Kyungmin Park [Thu, 1 Apr 2010 04:29:41 +0000 (13:29 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Wolfgang Denk [Wed, 31 Mar 2010 21:54:39 +0000 (23:54 +0200)]
Prepare v2010.03
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Wed, 31 Mar 2010 06:34:51 +0000 (08:34 +0200)]
net, doc: How to setup MAC address correctly
As this seems unclear, document how the flow of setting up
the MAC address is correct.
Signed-off-by: Heiko Schocher <hs@denx.de>
Text changed slightly, adding input from Mike Frysinger.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Wed, 31 Mar 2010 06:34:46 +0000 (08:34 +0200)]
net, fec_mxc: only setup the device enetaddr with eeprom value
Only fill the device enetaddr with the contents of the eeprom,
do not program it in MAC address registers
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Felix Radensky [Tue, 30 Mar 2010 12:02:13 +0000 (15:02 +0300)]
doc: Fix ramdisk examples in doc/uImage.FIT/multi.its
The ramdisk sections in doc/uImage.FIT/multi.its lack
load address and entry point properties. Using examples
from this file will result in unbootable image, u-boot
will issue the following error messages:
Can't get ramdisk subimage load address!
Ramdisk image is corrupt or invalid
This patch adds missing properties to ramdisk sections.
Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Heiko Schocher [Wed, 24 Mar 2010 12:22:50 +0000 (13:22 +0100)]
jffs2, suen3: Fix compiler warning
$ ./MAKEALL suen3
jffs2_1pass.c: In function 'get_fl_mem':
jffs2_1pass.c:399: warning: unused variable 'id'
jffs2_1pass.c: In function 'get_node_mem':
jffs2_1pass.c:423: warning: unused variable 'id'
Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Tom <Tom.Rix@windriver.com>
Donghwa Lee [Wed, 31 Mar 2010 10:18:56 +0000 (19:18 +0900)]
s5pc110: acme: auto download added using CAM FULL and VOLDOWN
Kyungmin Park [Wed, 31 Mar 2010 05:56:43 +0000 (14:56 +0900)]
Merge branch 'master' of http://git.denx.de/u-boot
Joonyoung Shim [Wed, 31 Mar 2010 05:23:44 +0000 (14:23 +0900)]
build: Update dofmind's setting
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Wolfgang Denk [Tue, 30 Mar 2010 20:22:47 +0000 (22:22 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Wolfgang Denk [Tue, 30 Mar 2010 20:21:24 +0000 (22:21 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Timur Tabi [Mon, 29 Mar 2010 17:51:07 +0000 (12:51 -0500)]
mpc86xx: set the DDR BATs after calculating true DDR size
After determining how much DDR is actually in the system, set DBAT0 and
IBAT0 accordingly. This ensures that the CPU won't attempt to access
(via speculation) addresses outside of actual memory.
On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB
and kept that way. If the system has less than 2GB of memory (typical for
an MPC8610 HPCD), the CPU may attempt to access this memory during
speculation. The zlib code is notorious for generating such memory reads,
and indeed on the MPC8610, uncompressing the Linux kernel causes a machine
check (without this patch).
Currently we are limited to power of two sized DDR since we only use a
single bat. If a non-power of two size is used that is less than
CONFIG_MAX_MEM_MAPPED u-boot will crash.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 26 Mar 2010 20:14:43 +0000 (15:14 -0500)]
85xx: Fix enabling of L1 cache parity on secondary cores
Use the same code between primary and secondary cores to init the
L1 cache. We were not enabling cache parity on the secondary cores.
Also, reworked the L1 cache init code to match the e500mc L2 init code
that first invalidates the cache and locks. Than enables the cache and
makes sure its enabled before continuing.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Stefan Roese [Mon, 29 Mar 2010 13:30:46 +0000 (15:30 +0200)]
ppc4xx: Fix problem with I2C bus >= 1 initialization
This patch fixes a problem introduced with patch
eb5eb2b0
[ppc4xx: Cleanup PPC4xx I2C infrastructure]. We need to assign the I2C
base address to the "i2c" pointer inside of the controller loop.
Otherwise controller 0 is initialized multiple times instead of
initializing each I2C controller sequentially.
Tested on Katmai.
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Minkyu Kang [Tue, 30 Mar 2010 10:18:37 +0000 (19:18 +0900)]
s5pc1xx: add checking routines for EVT1-Fused
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Heiko Schocher [Mon, 29 Mar 2010 11:15:48 +0000 (13:15 +0200)]
bootm, linux: fix booting Multi-File Image with "kernel+ramdisk+fdt"
Booting a "Multi-File Image" including a linux kernel, ramdisk and
fdt, generated with
mkimage -A ppc \
-O linux \
-T multi \
-C gzip \
-a
00000000 \
-e
00000000 \
-n "kernel-2.6+initrd+dtb" \
-d "vmlinux.bin.gz:ramdisk_image.gz:board.dtb" \
multi.bin
actually fails, because ramdisk start and end addresses
didn;t get initialized. This patch fixes this issue.
Tested on the KUP4K board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:42 +0000 (09:46 +0100)]
i2c: made unused function i2c_mux_add_device static
and removed it from the .h file
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:41 +0000 (09:46 +0100)]
cmd_i2c: introduced get_alen helper function
The code to parse alen appeared 6 times in the function.
Factored this out in a small helper function
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:40 +0000 (09:46 +0100)]
cmd_i2c: moved a define to before the functions
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:39 +0000 (09:46 +0100)]
cmd_i2c: moved mispositioned comment for i2c md
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Frans Meulenbroeks [Fri, 26 Mar 2010 08:46:38 +0000 (09:46 +0100)]
cmd_i2c.c: declared local functions as static
Declared all functions that were not called outside the file as static
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Wolfgang Denk [Mon, 29 Mar 2010 10:33:43 +0000 (12:33 +0200)]
Merge remote branch 'origin/master' into next
Wolfgang Denk [Mon, 29 Mar 2010 10:33:16 +0000 (12:33 +0200)]
Merge branch 'next' of git://denx.de/git/u-boot-cfi-flash into next
Minkyu Kang [Mon, 29 Mar 2010 10:17:57 +0000 (19:17 +0900)]
s5pc1xx: ipl: change binary name secure to evt1-fused
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 29 Mar 2010 08:36:07 +0000 (17:36 +0900)]
s5pc1xx: ipl: rename bl1.bin to bl1.img
prevent for deleting by distclean
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Donghwa Lee [Sun, 28 Mar 2010 02:34:56 +0000 (11:34 +0900)]
s5pc110: neptune: ALS_NRST checked by hw revision
Donghwa Lee [Sun, 28 Mar 2010 02:29:51 +0000 (11:29 +0900)]
s5pc110: neptune: lcd revision checked
Wolfgang Denk [Sat, 27 Mar 2010 23:25:14 +0000 (00:25 +0100)]
Prepare 2010.03-rc3
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 25 Mar 2010 13:07:23 +0000 (14:07 +0100)]
cmd_usb.c: print debug messages only when DEBUG is defined
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 24 Mar 2010 11:19:19 +0000 (12:19 +0100)]
ml300: remove support for broken, orphaned board
The ml300 board has a number of issues, but nobody cares about this
long-orphaned board any more. Remove it.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu>
Wolfgang Denk [Sat, 27 Mar 2010 23:15:20 +0000 (00:15 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Sat, 27 Mar 2010 22:37:46 +0000 (23:37 +0100)]
mkimage: fix Segmentation Fault when run without "-n name" option
The restructuring of the mkimage command in commit
89a4d6b1 ("tools:
mkimage: split code into core, default and FIT image specific")
introduced a bug that caused mkimage to segfault when run without
"-n name" option. Initialize the imagename entry to prevent that.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 27 Mar 2010 23:11:16 +0000 (00:11 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
Wolfgang Denk [Sat, 27 Mar 2010 23:04:18 +0000 (00:04 +0100)]
Merge branch 'next' of git://git.denx.de/u-boot-coldfire into next
Kyungmin Park [Sat, 27 Mar 2010 03:15:07 +0000 (12:15 +0900)]
s5pc110: kessler: S1 board memory detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Thomas Chou [Fri, 26 Mar 2010 00:17:00 +0000 (08:17 +0800)]
cfi flash: add status polling method for amd flash
This patch adds status polling method to offer an alternative to
data toggle method for amd flash chips.
This patch is needed for nios2 cfi flash interface, where the bus
controller performs 4 bytes read cycles for a single byte read
instruction. The data toggle method can not detect chip busy
status correctly. So we have to poll DQ7, which will be inverted
when the chip is busy.
This feature is enabled with the config def,
CONFIG_SYS_CFI_FLASH_STATUS_POLL
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
Minkyu Kang [Fri, 26 Mar 2010 10:31:44 +0000 (19:31 +0900)]
build: update prom's setting
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 26 Mar 2010 10:28:04 +0000 (19:28 +0900)]
s5pc1xx: support secure boot image
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Renato Andreola [Wed, 24 Mar 2010 15:00:47 +0000 (23:00 +0800)]
cfi_flash: precision and underflow problem in tout calculation
With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000.
Signed-off-by: Renato Andreola <renato.andreola@imagos.it>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Stefan Roese <sr@denx.de>
MyungJoo Ham [Thu, 25 Mar 2010 05:16:28 +0000 (14:16 +0900)]
s5pc110 deep idle support: code clean up
MyungJoo Ham [Thu, 25 Mar 2010 03:27:58 +0000 (12:27 +0900)]
s5pc110: goto INFORM0 if it's waking up from deep idle (C110 only)
heeman.jun [Thu, 25 Mar 2010 01:11:48 +0000 (10:11 +0900)]
s5pc110:p1:chagne lcd frame_rate from 60hz to 40hz because the display is unsable using 60hz in P1
Signed-off-by: heeman.jun <heeman.jun@samsung.com>
TsiChung Liew [Tue, 16 Mar 2010 17:39:36 +0000 (12:39 -0500)]
ColdFire: Fix m54455EVB save environment bug
The ATMEL flash does not have buffer write feature. Assgined
buffer_size = 1, so that when there is a write to the flash
will not use buffer write function.
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
TsiChung Liew [Tue, 16 Mar 2010 00:39:21 +0000 (19:39 -0500)]
ColdFire: Fix incorrect M5253DEMO default environment
The flash location is at 0xff800000, not 0
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
TsiChung Liew [Fri, 12 Mar 2010 04:12:53 +0000 (22:12 -0600)]
ColdFire: Cache update for all platforms
The CF will call cache functions in lib_m68/cache.c and the
cache settings are defined in platform configuration file.
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
TsiChung Liew [Thu, 11 Mar 2010 00:50:22 +0000 (18:50 -0600)]
ColdFire: Fix SDRAM size on M5208evb rev E
The proper SDRAM size is 32MB not 64MB
Signed-off-by: Jingchang Lu <b22599@freescale.com>
TsiChung Liew [Thu, 11 Mar 2010 00:24:07 +0000 (18:24 -0600)]
ColdFire: Misc update for M53017
Reside Ethernet buffer descriptors in SRAM instead of DRAM. Add
CONFIG_SYS_TX_ETH_BUFFER in platform configuration file. Update
DRAM control and SRAM control register setting. Update cache
setting where size does not write to proper region.
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
TsiChung Liew [Wed, 10 Mar 2010 23:32:13 +0000 (17:32 -0600)]
ColdFire: Add CPU compile flag for mcf5301x and mcf532x
Add CPU compile flag -mcpu=53015 in cpu/config.mk
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
TsiChung Liew [Wed, 10 Mar 2010 22:33:03 +0000 (16:33 -0600)]
ColdFire: Update Extra environment Data for M5275EVB
Provide extra environment Data. Remove default network
address and MAC address.
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
projects / kernel / u-boot.git / log