Etienne Carriere [Tue, 31 May 2022 16:09:18 +0000 (18:09 +0200)]
firmware: scmi: prepare scmi uclass API to multi-channel
Changes SCMI driver API function devm_scmi_process_msg() to add
an SCMI channel reference argument for when SCMI agent supports
SCMI protocol specific channels. First argument of devm_scmi_process_msg()
is also change to point to the caller SCMI protocol device rather
than its parent device (the SCMI agent device).
The argument is a pointer to opaque struct scmi_channel known from
the SCMI transport drivers. It is currently unused and caller a pass
NULL value. A later change will enable such support once SCMI protocol
drivers have means to get the channel reference during initialization.
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Etienne Carriere [Tue, 31 May 2022 16:09:17 +0000 (18:09 +0200)]
firmware: scmi: optee: fix inline description of PTA_SCMI_CMD_GET_CHANNEL
Removes inaccurate inline description of OP-TEE SCMI PTA command
PTA_SCMI_CMD_GET_CHANNEL.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Etienne Carriere [Tue, 31 May 2022 16:09:16 +0000 (18:09 +0200)]
firmware: scmi: optee: use TEE shared memory for SCMI messages
Changes implementation when using TEE dynamically allocated shared
memory to synchronize with the Linux implementation where the legacy
SMT protocol cannot be used with such memory since it is expected from
device mapped memory whereas OP-TEE shared memory is cached and
hence should not be accessed using memcpy_toio()/memcpy_fromio().
This change implements the MSG shared memory protocol introduced
in Linux [1]. The protocol uses a simplified SMT header of 32bit
named MSG_SMT to carry SCMI protocol information and uses side channel
means to carry exchanged buffer size information, as TEE invocation API
parameters when used in the SCMI OP-TEE transport.
Link: [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=
f301bba0ca7392d16a6ea4f1d264a91f1fadea1a
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Tom Rini [Thu, 23 Jun 2022 12:16:21 +0000 (08:16 -0400)]
Merge branch '2022-06-22-platform-updates-and-additions' into next
- Add hpe gxp architecture and platform, Arm corstone1000 platform.
- ast2600, devkit8000, NPCM7xx improvements
Tom Rini [Wed, 22 Jun 2022 15:25:52 +0000 (11:25 -0400)]
corstone1000: Convert to text file environment
Convert this platform to using the text file environment rather than
defining CONFIG_EXTRA_ENV_SETTINGS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 22 Jun 2022 15:23:03 +0000 (11:23 -0400)]
gxp: Convert to text file environment
Convert this platform to using the text file environment rather than
defining CONFIG_EXTRA_ENV_SETTINGS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Jim Liu [Tue, 7 Jun 2022 08:33:54 +0000 (16:33 +0800)]
misc: nuvoton: Add NPCM7xx otp controller driver
Add Nuvoton BMC npcm750 otp driver
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Jim Liu [Tue, 7 Jun 2022 08:32:09 +0000 (16:32 +0800)]
crypto: nuvoton: Add NPCM7xx SHA driver
add nuvoton BMC npcm750 SHA driver
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Jim Liu [Tue, 7 Jun 2022 08:32:08 +0000 (16:32 +0800)]
crypto: nuvoton: Add NPCM7xx AES driver
add nuvoton BMC npcm750 AES driver
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Chia-Wei Wang [Wed, 1 Jun 2022 08:43:52 +0000 (16:43 +0800)]
ast2600: spl: Add boot mode detection
AST2600 supports boot from SPI(mmap), eMMC, and UART.
This patch adds the boot mode detection and return the
corresponding boot device type.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Chia-Wei Wang [Wed, 1 Jun 2022 08:21:15 +0000 (16:21 +0800)]
configs: ast2600: Move SPL bss section to DRAM space
The commit
b583348ca8c8 ("image: fit: Align hash output buffers") places
the hash output buffer at the .bss section. However, AST2600 by default
executes SPL in the NOR flash XIP way. This results in the hash output
cannot be written to the buffer as it is located at the R/X only region.
We need to move the .bss section out of the SPL body to the DRAM space,
where hash output can be written to. This patch includes:
- Define the .bss section base and size
- A new SPL linker script is added with a separate .bss region specified
- Enable CONFIG_SPL_SEPARATE_BSS kconfig option
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:42 +0000 (16:21 -0500)]
MAINTAINERS: Introduce HPE GXP Architecture
Create a section in MAINTAINERS for the GXP HPE architecture
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:41 +0000 (16:21 -0500)]
configs: gxp: add gxp_defconfig
This is the initial very basic config that enables the U-Boot console on
the hpe gxp soc.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:40 +0000 (16:21 -0500)]
configs: gxp: add core support
Add the include file for the gxp soc.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:39 +0000 (16:21 -0500)]
ARM: dts: Add device tree files for hpe gxp soc
The HPE SoC is new to linux. A basic device tree layout with minimum
required for linux to boot including a timer and watchdog support has
been created.
The dts file is empty at this point but will be updated in subsequent
updates as board specific features are enabled.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:38 +0000 (16:21 -0500)]
dt-bindings: spi: Add hpe gxp spi
Add support for the HPE GXP SPI Controller.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:37 +0000 (16:21 -0500)]
board: hpe: gxp: add HPE GXP soc support
Add basic support for the HPE GXP SoC. Reset the EHCI controller at
boot.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:36 +0000 (16:21 -0500)]
spi: gxp_spi: Add GXP SPI controller driver
The GXP supports 3 separate SPI interfaces to accommodate the system
flash, core flash, and other functions. The SPI engine supports variable
clock frequency, selectable 3-byte or 4-byte addressing and a
configurable x1, x2, and x4 command/address/data modes. The memory
buffer for reading and writing ranges between 256 bytes and 8KB. This
driver supports access to the core flash.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:35 +0000 (16:21 -0500)]
timer: gxp: Add HPE GXP timer support
Add support for the HPE GXP SOC timer. The GXP supports several different
kinds of timers but for the purpose of this driver there is only support
for the General Timer. The timer has a 1us resolution and is 56 bits.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Nick Hawkins [Wed, 8 Jun 2022 21:21:34 +0000 (16:21 -0500)]
ARM: hpe: gxp: add core support
The GXP is the HPE BMC SoC that is used in the majority
of current generation HPE servers. Traditionally the asic will
last multiple generations of server before being replaced.
Info about SoC:
HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC
features at HPE. It supports ARMv7 architecture based on the Cortex A9
core. It is capable of using an AXI bus to whicha memory controller is
attached. It has multiple SPI interfaces to connect boot flash and BIOS
flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple
i2c engines to drive connectivity with a host infrastructure. There
currently are no public specifications but this process is being worked.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Tom Rini [Wed, 22 Jun 2022 20:08:56 +0000 (16:08 -0400)]
cmd/misc: Stop using a function pointer
Currently, enabling CMD_MISC gives:
cmd/misc.c:67:25: warning: assignment to 'int (*)(struct udevice *, int, void *, int)' from incompatible pointer type 'int (*)(struct udevice *, int, const void *, int)' [-Wincompatible-pointer-types]
Because 'misc_read' takes a void * and 'misc_write' takes a const void
*, both of which make sense for their operation. Given there's one
place we make use of the function pointer, just call read or write
directly for the operation we're called with.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Rui Miguel Silva [Wed, 11 May 2022 09:55:41 +0000 (10:55 +0100)]
arm: add support to corstone1000 platform
Corstone1000 is a platform from arm, which includes pre
verified Corstone SSE710 sub-system that combines Cortex-A and
Cortex-M processors [0].
This code adds the support for the Cortex-A35 implementation
at host side, it contains also the necessary bits to support
the Corstone 1000 FVP (Fixed Virtual Platform) [1] and also the
FPGA MPS3 board implementation of this platform. [2]
0: https://developer.arm.com/documentation/102360/0000
1: https://developer.arm.com/tools-and-software/open-source-software/arm-platforms-software/arm-ecosystem-fvps
2: https://developer.arm.com/documentation/dai0550/c/
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Rui Miguel Silva [Wed, 11 May 2022 09:55:40 +0000 (10:55 +0100)]
cmd: load: add load command for memory mapped
cp.b is used a lot as a way to load binaries to memory and execute
them, however we may need to integrate this with the efi subsystem to
set it up as a bootdev.
So, introduce a loadm command that will be consistent with the other
loadX commands and will call the efi API's.
ex: loadm $kernel_addr $kernel_addr_r $kernel_size
with this a kernel with CONFIG_EFI_STUB enabled will be loaded and
then subsequently booted with bootefi command.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Anthoine Bourgeois [Thu, 2 Jun 2022 20:27:08 +0000 (22:27 +0200)]
ARM: dts: omap3-devkit8000: Fix CONFIG_DM_ETH warning
Add the missing ethernet node in u-boot dts.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Anthoine Bourgeois [Thu, 2 Jun 2022 20:27:07 +0000 (22:27 +0200)]
ARM: dts: omap3-devkit8000: Fix CONFIG_DM_I2C warning
Seems that u-boot can't probe i2c bus at 2.6Mhz speed, so lower
the speed to the default value 100Khz.
v2: fix i2c1 frequency in the root omap3-u-boot.dtsi include.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Anthoine Bourgeois [Thu, 2 Jun 2022 20:27:06 +0000 (22:27 +0200)]
ARM: dts: omap3-devkit8000: Add support for Devkit8000
This commit adds OMAP3 BeagleBoard devicetree files from Linux
v5.16.0.
This commit fixes CONFIG_DM_MMC warning.
v3: patch clean-up
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Tom Rini [Mon, 20 Jun 2022 18:40:59 +0000 (14:40 -0400)]
Merge branch 'master' into next
Merge in v2022.07-rc5.
Tom Rini [Mon, 20 Jun 2022 18:30:36 +0000 (14:30 -0400)]
Prepare v2022.07-rc5
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 20 Jun 2022 12:13:12 +0000 (08:13 -0400)]
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 20 Jun 2022 12:09:24 +0000 (08:09 -0400)]
Merge tag 'u-boot-stm32-
20220620' of https://source.denx.de/u-boot/custodians/u-boot-stm into next
- Add STM32MP13 SoCs support with associated board STM32M135F-DK
- Correct livetree support in stm32mp1 boards
- Activate livetree for stm32mp15 DHSOM boards
Tom Rini [Mon, 20 Jun 2022 12:08:29 +0000 (08:08 -0400)]
Merge tag 'fsl-qoriq-2022-6-20-v2' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next
Layerscape:
add sfp driver
Kconfig cleanup
sl28 board update
support hdp firmware loading
powerpc:
dts update for p2020
p1_p2_rdb_pc board update
fsl_esdhc fallback to 1-bit mode support
Michael Walle [Mon, 30 May 2022 21:02:10 +0000 (23:02 +0200)]
board: sl28: rename include guard macro
Avoid name clashes with an include file on board level.
Signed-off-by: Michael Walle <michael@walle.cc>
Michael Walle [Mon, 30 May 2022 21:02:09 +0000 (23:02 +0200)]
board: sl28: support 8 GiB memory
The board supports up to 8 GiB memory. The memory is soldered on the
board but the configuration is equivalent to a dual chip select, dual
rank DIMM module.
Signed-off-by: Michael Walle <michael@walle.cc>
Michael Walle [Mon, 30 May 2022 21:02:08 +0000 (23:02 +0200)]
board: sl28: remove unneeded ddr config parameter
config_2 doesn't need to be set to zero because that is already the
default value.
Signed-off-by: Michael Walle <michael@walle.cc>
Michael Walle [Mon, 30 May 2022 21:02:07 +0000 (23:02 +0200)]
board: sl28: set CPO value
With a 8GiB memory board, it seems that the "very unlikely event" of a
DDR initialization with non-optimal values are not really that unlikely.
It happens in about every other reboot. As described in erratum
A-009942, preset the DEBUG_28 register with an optimal value. The value
iself depends on the memory configuration of the board, but the used
value seems to work well for all variants.
Signed-off-by: Michael Walle <michael@walle.cc>
Michael Walle [Mon, 30 May 2022 21:02:05 +0000 (23:02 +0200)]
armv8: layerscape: add missing RCW source defines
A board might need to get the source of the RCW word, which is also the
boot source in most cases.
These defines are taken from the LS1028A and I expect they are the same
across the SoCs with the same chassis, after all, there was already a
reset source for NOR flash.
Signed-off-by: Michael Walle <michael@walle.cc>
Pali Rohár [Thu, 26 May 2022 12:36:03 +0000 (14:36 +0200)]
powerpc: bootm: Fix sizes in memory adjusting warning
Old size is stored in size variable and new size is in bootm_size variable.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Thu, 26 May 2022 08:52:27 +0000 (10:52 +0200)]
board: freescale: p1_p2_rdb_pc: Move boot reset macros to p1_p2_bootsrc.h
Code for changing boot source is platform generic and can be used by any
P1* and P2* compatible RDB board. Not only by boards which use config
header file p1_p2_rdb_pc.h.
So move this code from p1_p2_rdb_pc.h to p1_p2_bootsrc.h and cleanup macros
for generating boot source env variables in CONFIG_EXTRA_ENV_SETTINGS.
This allows to use code for resetting board and rebooting to other boot
source also by other boards in future.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Tue, 24 May 2022 11:24:59 +0000 (13:24 +0200)]
powerpc: dts: p2020: Define PMC node
Copy definition of PMC node from upstream Linux kernel P2020 dts files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Wed, 11 May 2022 18:27:13 +0000 (20:27 +0200)]
mmc: fsl_esdhc: Add new config option for default fallback mode
Currently default fallback SDHC mode is 1-bit. Add new config option
CONFIG_SYS_FSL_ESDHC_DEFAULT_BUS_WIDTH to allow specifying default fallback
mode. This is useful e.g. for SPL builds which loads other parts from SD
card during boot process.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Pali Rohár [Wed, 11 May 2022 18:27:12 +0000 (20:27 +0200)]
mmc: fsl_esdhc: Set fallback mode to 1-bit
8-bit mode is not supported by SD cards and on P2020 are four SDHC pins
shared with SPI (so if P2020 board have also SPI then only 4-bit SDHC mode
is provided). So 8-bit SDHC mode is really bad default.
When max bus width is not provided then set mode to 1-bit. This mode is
supported by all cards, so it is the best option for fallback mode.
Also P2020 bootrom sets mode to 1-bit when booting from SD/MMC card.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Alison Wang [Tue, 10 May 2022 10:29:10 +0000 (18:29 +0800)]
ls1028a: hdp: Add config support for HDP firmware loading
This patch adds config support for HDP firmware loading on LS1028A.
Signed-off-by: Oliver Brown <oliver.brown@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Pali Rohár [Mon, 2 May 2022 16:29:25 +0000 (18:29 +0200)]
powerpc: mpc85xx: Set default SYS_IMMR value for P1/P2 CPUs
This reduce usage of per-board custom settings.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Mon, 2 May 2022 16:28:08 +0000 (18:28 +0200)]
mtd: rawnand: fsl_elbc: Fix DM support in DTS code path
For proper DM support it is required to fill also mtd->dev member.
Otherwise DM would not see nand device at all.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Sun, 1 May 2022 17:17:35 +0000 (19:17 +0200)]
powerpc: mmu: Fix FSL_BOOKE_MAS2() macro
Effective page number mask for MAS2 register is stored in macro MAS2_EPN.
Fixes:
2146cf56821c ("Reworked FSL Book-E TLB macros to be more readable")
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Sun, 1 May 2022 15:45:58 +0000 (17:45 +0200)]
powerpc: fsl_law: Add definition for first PCIe target interface
Header file asm/fsl_law.h already provides correct definition for second
and third PCIe controller (LAW_TRGT_IF_PCIE_2 and LAW_TRGT_IF_PCIE_3). But
is missing definition for the first PCIe controller (LAW_TRGT_IF_PCIE_1).
Note that existing definition for LAW_TRGT_IF_PCIE_2 and LAW_TRGT_IF_PCIE_3
are slightly complicated, but are really correct for P2020 platform.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Sun, 1 May 2022 12:23:14 +0000 (14:23 +0200)]
board: freescale: p1_p2_rdb_pc: Implement board_reset()
Do board reset via CPLD's system reset register.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Sun, 1 May 2022 12:20:48 +0000 (14:20 +0200)]
board: freescale: p1_p2_rdb_pc: Enable TDM function only for P1010
TDM function is supported only on P1010. P2020 does not have PMUXCR_TDM_ENA
register, so do not enable it.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Thu, 28 Apr 2022 11:31:43 +0000 (13:31 +0200)]
powerpc: mpc85xx: Fix compilation with CONFIG_WDT
When CONFIG_WDT is enabled then non-DM watchdog code cannot be used due to
conflicting functions like watchdog_reset(). So disable compilation of
mpc85xx watchdog_reset() function when CONFIG_WDT is enabled.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Wed, 27 Apr 2022 14:05:01 +0000 (16:05 +0200)]
powerpc: dts: p2020: Define ecm, memory and guts nodes
Copy definition of these nodes from upstream Linux kernel P2020 dts files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Wed, 27 Apr 2022 14:05:00 +0000 (16:05 +0200)]
powerpc: dts: p2020: Define DMA nodes
Copy definition of DMA nodes from upstream Linux kernel P2020 dts files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Wed, 27 Apr 2022 14:04:59 +0000 (16:04 +0200)]
powerpc: dts: p2020: Define crypto node
Copy definition of crypto node from upstream Linux kernel P2020 dts files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Pali Rohár [Wed, 27 Apr 2022 14:04:58 +0000 (16:04 +0200)]
powerpc: dts: p2020: Define MPIC nodes
Copy definition of MPIC nodes from upstream Linux kernel P2020 dts files.
Signed-off-by: Pali Rohár <pali@kernel.org>
Sean Anderson [Tue, 26 Apr 2022 18:31:49 +0000 (14:31 -0400)]
ARM: layerscape: Use ARCH_LS104?A insead of TARGET_LS104?ARDB
These frequency calculations depend on the RCW format, which is not
dependent on any particular board. Switch to using ARCH symbols instead
of TARGET.
This whole function could probably use less ifdefs, but for now just do
a minimal conversion.
Fixes:
24cb6f2295 ("fsl-layerscape: Add fsl_esdhc peripheral clock support")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Sean Anderson [Fri, 22 Apr 2022 18:34:20 +0000 (14:34 -0400)]
arch: layerscape: Add SFP binding
This adds an SFP binding for the processors it is present on. I have
only tested this for the LS1046A.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Sean Anderson [Fri, 22 Apr 2022 18:34:19 +0000 (14:34 -0400)]
ARM: dts: ls1021a: update the clockgen node
QorIQ platforms now use different clock bindings. Although we don't use
the device tree for clocks on this platform, it is helpful to sync it
because then the bindings will more closely match Linux. Additionally,
it allows for using more clock fractions (such as platform/4).
This corresponds to Linux commit
b6f5e7019391 ("ARM: dts: ls1021a:
update the clockgen node").
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Sean Anderson [Fri, 22 Apr 2022 18:34:18 +0000 (14:34 -0400)]
arm: layerscape: Add sfp driver
This adds a driver for the Security Fuse Processor (SFP) present on
LS1012A, LS1021A, LS1043A, and LS1046A processors. It holds the
Super-Root Key (SRK), One-Time-Programmable Master Key (OTPMK), and
other "security" related fuses. Similar devices (sharing the same name)
are present on other processors, but for the moment this just supports
the LS2 variants.
The mirror registers are loaded during power-on reset. All mirror
registers must be programmed or read at once. Because of this, `fuse
prog` will program all fuses, even though only one might be specified.
To prevent accidentally burning through all your fuse programming cycles
with something like `fuse prog 0 0 A B C D`, we limit ourselves to one
programming cycle per reset. Fuses are numbered based on their address.
The fuse at 0x1e80200 is 0, the fuse at 0x1e80204 is 1, etc.
The TA_PROG_SFP supply must be enabled when programming fuses, but must
be disabled when reading them. Typically this supply is enabled by
inserting a jumper or by setting a register in the board's FPGA. I've
also added support for using a regulator. This could be helpful for
automatically issuing the FPGA write, or for toggling a GPIO controlling
the supply.
I suggest using the following procedure for programming:
1. Override the fuses you wish to program
=> fuse override 0 2 A B C D
2. Inspect the values and ensure that they are what you expect
=> fuse sense 0 2 4
3. Enable TA_PROG_SFP
4. Issue a program command using OSPR0 as a dummy. Since it contains the
write-protect bit you will usually want to write it last anyway.
=> fuse prog 0 0 0
5. Disable TA_PROG_SFP
6. Read back the fuses and ensure they are correct
=> fuse read 0 2 4
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Tom Rini [Sun, 19 Jun 2022 15:30:29 +0000 (11:30 -0400)]
Merge tag 'efi-2022-07-rc5-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2020-07-rc5-2
Documentation:
* man-pages for booti and printenv
UEFI
* correct return value for printenv -e command
* initialize console size late
Heinrich Schuchardt [Tue, 14 Jun 2022 06:02:03 +0000 (08:02 +0200)]
efi_loader: initialize console size late
If CONFIG_VIDEO_DM=n we query the display size from the serial console.
Especially when using a remote console the response can be so late that
it interferes with autoboot.
Only query the console size when running an EFI binary.
Add debug output showing the determined console size.
Reported-by: Fabio Estevam <festevam@gmail.com>
Fixes:
a57ad20d07e8 ("efi_loader: split efi_init_obj_list() into two stages")
Fixes:
a9bf024b2933 ("efi_loader: disk: a helper function to create efi_disk objects from udevice")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: Fabio Estevam <festevam@denx.de>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Heinrich Schuchardt [Sun, 19 Jun 2022 12:02:18 +0000 (14:02 +0200)]
test: work around for EFI terminal size probing
When the UEFI sub-system is initialized it sends an escape sequence to the
serial console to determine the terminal size. This stops the
run_command_list() function of the console emulation from recognizing the
U-Boot command line prompt.
Add a 'print -e' command as first command in the command list to work
around this issue.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sun, 19 Jun 2022 11:36:48 +0000 (13:36 +0200)]
cmd: correct return value for printenv -e
If printenv -e is executed and the specified variable is not found, the
return value $? of the command should be 1 (false).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sun, 19 Jun 2022 11:59:22 +0000 (13:59 +0200)]
doc: man-page for the printenv command
Privide a man-page for the printenv command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sat, 11 Jun 2022 06:23:31 +0000 (08:23 +0200)]
doc: man-page for bootz command
Provide a man-page for the bootz command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Fri, 17 Jun 2022 13:41:11 +0000 (09:41 -0400)]
Merge tag 'u-boot-stm32-
20220617' of https://source.denx.de/u-boot/custodians/u-boot-stm
- Fix the stm32prog command for stm32mp platform
- Add stm32mp15x DHCOR based DRC Compact board
Tom Rini [Fri, 17 Jun 2022 13:35:28 +0000 (09:35 -0400)]
Merge commit '
32e0379143b433e29d76404f5f4c279067e48853' of https://github.com/tienfong/uboot_mainline
Tom Rini [Fri, 17 Jun 2022 13:13:50 +0000 (09:13 -0400)]
Merge branch '2022-06-16-assorted-bugfixes'
- A wide array of regression fixes and minor updates
Patrick Delaunay [Fri, 20 May 2022 16:38:10 +0000 (18:38 +0200)]
stm32mp1: fix reference for STMicroelectronics
Replace reference to the correct name STMicroelectronics
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Wed, 15 Jun 2022 17:41:48 +0000 (19:41 +0200)]
configs: stm32mp: cleanup the stm32mp15 file
Remove STM32_SYSRAM_END and clean the comments in stm32mp15_common.h file
after moving some CONFIG to Kconfig: CONFIG_SYS_CBSIZE,
CONFIG_SPL_MAX_FOOTPRINT, CONFIG_SYS_SPL_MALLOC_START and
CONFIG_SYS_SPL_MALLOC_SIZE.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Wed, 1 Jun 2022 16:33:40 +0000 (18:33 +0200)]
stm32mp: stpmic1: remove the debug unit request by debugger
Depending on backup register value, U-Boot SPL maintains the debug unit
powered-on for debugging purpose; only BUCK1 is required for powering
the debug unit, so revert the setting for all the other power lanes,
except BUCK3 that has to be always on.
To be functional this patch requires a modification in the debugger
,openocd for example, to update the STM32MP15 backup register when it is
required to debug SPL after reset. After deeper analysis this behavior
will be never supported in tools so the associated code, will be never
used and the associated code can be removed.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Mon, 6 Jun 2022 14:04:16 +0000 (16:04 +0200)]
ARM: stm32: activate OF_LIVE for DHSOM
Activate the live DT with CONFIG_OF_LIVE to reduce the DT parsing
time.
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Mon, 6 Jun 2022 14:04:15 +0000 (16:04 +0200)]
board: dhelectronics: stm32mp1: convert to livetree
Replace call to fdt_*() functions and access to gd->fdt_blob
with call to ofnode_*() functions to support a live tree.
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Thu, 19 May 2022 07:07:30 +0000 (09:07 +0200)]
board: engicam: stm32mp1: convert to livetree
Replace gd->fdt_blob access with fdt_getprop() function to the
function ofnode_get_property() to support a live tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Thu, 19 May 2022 07:07:29 +0000 (09:07 +0200)]
board: stm32mp1: convert to livetree
Replace gd->fdt_blob access with fdt_getprop() function to the
function ofnode_get_property() to support a live tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Thu, 19 May 2022 15:56:46 +0000 (17:56 +0200)]
misc: stm32mp13: introduce STM32MP13 RCC driver
Add the MISC RCC driver for STM32MP13, and bind it to the RCC reset
driver, required for initial support.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Sean Anderson <seanga2@gmail.com>
Change-Id: Ida11c15462caf140f87b1e3239efa2b8a689acb9
Patrick Delaunay [Thu, 19 May 2022 15:56:45 +0000 (17:56 +0200)]
clk: Add directory for STM32 clock drivers
Add a directory in drivers/clk to regroup the clock drivers for all
STM32 Soc with CONFIG_ARCH_STM32 (MCUs with cortex M) or
CONFIG_ARCH_STM32MP (MPUs with cortex A).
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Acked-by: Sean Anderson <seanga2@gmail.com>
Change-Id: I955af307963f732167396f0157a30cf2fc91f150
Patrick Delaunay [Mon, 9 May 2022 15:13:22 +0000 (17:13 +0200)]
stm32mp: fdt: update etzpc for STM32MP13x
Add support of STM32MP13x the ETZPC part of fdt.c
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Change-Id: If2777fbf66b8525a2a447056780aaa04e6b0a9a0
Patrick Delaunay [Mon, 9 May 2022 15:13:21 +0000 (17:13 +0200)]
stm32mp: fdt: update etzpc for STM32MP15x
Introduce STM32MP15 function and defines to prepare the
STM32MP13 introduction.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Change-Id: I909b205e73dcf207e0216aae5905c3c52472020e
Patrick Delaunay [Fri, 20 May 2022 16:24:54 +0000 (18:24 +0200)]
doc: st: stm32mp1: add STM32MP13x support
Add in U-Boot documentation the quick instruction to
setup the STMicroelectronics STM32MP13x boards.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:53 +0000 (18:24 +0200)]
configs: add stm32mp13 defconfig
Add a initial config for STM32M13x SOC family, using the stm32mp135f-dk
device tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:52 +0000 (18:24 +0200)]
arm: dts: stm32mp: add stm32mp13 device tree for U-Boot
Compile the device tree of STM32MP13x boards and add the needed
U-Boot add-on.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:51 +0000 (18:24 +0200)]
mmc: stm32_sdmmc2: make reset property optional
Although not recommended, the reset property could be made optional.
This way the driver will probe even if no reset property is provided
in an sdmmc node in DT. This reset is already optional in Linux.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:50 +0000 (18:24 +0200)]
ram: stm32mp1: add support of STM32MP13x
Add support for new compatible "st,stm32mp13-ddr" to manage the
DDR sub system (Controller and PHY) in STM32MP13x SOC:
- only one AXI port
- support of 16 port output (MEMC_DRAM_DATA_WIDTH = 2)
The STM32MP15x SOC have 2 AXI ports and 32 bits support.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:49 +0000 (18:24 +0200)]
board: stm32pm1: add stm32mp13 board support
Add stm32mp15x prefix to all STM32MP15x board specific functions,
this patch is a preliminary step for STM32MP13x support.
This patch also adds the RCC probe to avoid circular access with
usbphyc probe as clk provider.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Dinesh Maniyam [Wed, 1 Jun 2022 10:49:02 +0000 (18:49 +0800)]
ddr: altera: soc64: Integer fix overflow that caused DDR size mismatched
Convert the constant integer to 'phys_size_t' to avoid overflow
when calculating the SDRAM size.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Wed, 1 Jun 2022 07:57:25 +0000 (15:57 +0800)]
drivers: cache: ncore: Disable snoop filter
There is hardware bug in NCORE CCU IP and it is causing an issue in the
coherent directory tracking of outstanding cache lines.
The workaround is disabling snoop filter.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Tue, 31 May 2022 08:15:17 +0000 (16:15 +0800)]
arm: dts: socfpga: stratix10: Add freeze controller node
The freeze controller is required for FPGA partial reconfig.
This node is disable on default.
Enable this node via u-boot fdt command when needed.
Signed-off-by: Yau Wai Gan <yau.wai.gan@intel.com>
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Tue, 31 May 2022 08:05:56 +0000 (16:05 +0800)]
arm: dts: socfpga: agilex: Add freeze controller node
The freeze controller is required for FPGA partial reconfig.
This node is disable on default.
Enable this node via u-boot fdt command when needed.
Signed-off-by: Yau Wai Gan <yau.wai.gan@intel.com>
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Wed, 1 Jun 2022 07:54:59 +0000 (15:54 +0800)]
arch: arm: socfpga: timer_s10: Override udelay for secure section
Override __udelay() as 'always inlined' function so that PSCI code
run in '__secure' section can call this delay function as well.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:48 +0000 (18:24 +0200)]
pinctrl: stm32: add support of STM32MP135
Add support for "st,stm32mp135-pinctrl" for STM32MP13x
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:47 +0000 (18:24 +0200)]
arm: stm32mp: support 2 MAC address for STM32MP13
Add support of several MAC address in OTP (3 32bits OTP word for
2 MAC address) for SOCs in STM32MP13x family: STM32MP133 and STM32MP135.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:46 +0000 (18:24 +0200)]
arm: stm32mp: add support of STM32MP13x
Introduce the code in mach-stm32mp and the configuration file
stm32mp13_defconfig for the new STM32MP family.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:45 +0000 (18:24 +0200)]
arm: stm32mp: add CONFIG_STM32MP15_PWR
Add config CONFIG_STM32MP15_PWR to handle the
access to regulators managed by the PWR driver defined in
pwr_regulator.c
This driver is only used in U-Boot by STM32MP15x family.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:44 +0000 (18:24 +0200)]
arm: stm32mp: add sub config Kconfig.15x
Add sub Kconfig for each SOC in the STM32 CPU family.
It is a preliminary step to introduce a new SOC in the STM32MP family.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:43 +0000 (18:24 +0200)]
arm: stm32mp: add choice for STM32MP SOC family
Add mandatory choice for SOC support in ARCH_STM32MP.
This patch is a preliminary step for new SOC introduction
in STM32MP family.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:42 +0000 (18:24 +0200)]
arm: stm32mp: move code for STM32MP15x
Move code and defines only needed for CONFIG_STM32MP15x in stm32mp15x.c
when low level init without TFABOOT is supported.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:41 +0000 (18:24 +0200)]
arm: stm32mp: move the get_otp helper function in bsec
As the get_otp() helper function in bsec are common for all STM32MP family,
move this function in bsec driver
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:40 +0000 (18:24 +0200)]
configs: stm32mp1: move SUPPORT_SPL in STM32MP15x
The SPL is only supported by STM32MP15x not by all the
SOC with STM32MP arch.
Only TFABOOT is supported in next products.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Fri, 20 May 2022 16:24:39 +0000 (18:24 +0200)]
ARM: dts: stm32: add STM32MP13 SoCs support
Add initial support of STM32MP13 family based on v5.18-rc2
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:21 +0000 (11:55 +0200)]
ARM: dts: stm32: Add DHCOR based DRC Compact board
Add DT for DH DRC Compact unit, which is a universal controller device.
The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD
card slot, eMMC and SDIO Wi-Fi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:20 +0000 (11:55 +0200)]
ARM: dts: stm32: Add alternate pinmux for SPI2 pins
Add another mux option for SPI2 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>