drm/amdgpu: Reset OOB table error count info

The OOB table error count info should be reset after reset
eeprom table

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fulfill the support for DriverSmuConfig table

Enable the support for DriverSmuConfig table on Navi1x and
Sienna_Cichlid.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct UMD pstate clocks for Dimgrey Cavefish and Beige Goby

Correct the UMD pstate profiling clocks for Dimgrey Cavefish and Beige
Goby.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Add emit_clock_levels calls

   (v4)
     Modifications to satisfy checkpatch --strict
   (v3)
     Rewrote patchset to order patches as (API, hw impl, usecase)

     - modified amdgpu_get_pp_od_clk_voltage to try
       amdgpu_dpm_emit_clock_levels and fallback to
       amdgpu_dpm_print_clock_levels if emit is not implemented.
     - modified amdgpu_get_pp_dpm_clock to try
       amdgpu_dpm_emit_clock_levels and fallback to
       amdgpu_dpm_print_clock_levels if emit is not implemented.
     - Newline is printed to buf if no output produced

 == Test ==
 LOGFILE=pp_clk.test.log
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display"  > $LOGFILE
 FILES="pp_od_clk_voltage
 pp_dpm_sclk
 pp_dpm_mclk
 pp_dpm_pcie
 pp_dpm_socclk
 pp_dpm_fclk
 pp_dpm_dcefclk
 pp_dpm_vclk
 pp_dpm_dclk "

 for f in $FILES
 do
   echo === $f === >> $LOGFILE
   cat $HWMON_DIR/device/$f >> $LOGFILE
 done
 cat $LOGFILE

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Implement emit_clk_levels for navi10

   (v4)
     Modifications to satisfy checkpatch --strict
   (v3)
     Rewrote patchset to order patches as (API, hw impl, usecase)

     - implement emit_clk_levels for navi10, based on print_clk_levels,
       but using sysfs_emit without smu_cmn_get_sysfs() workaround

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: loose check for umc poison mode

No need to check poison setting for each channel, check for umc0
channel0 is enough.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support for GC 10.1.4

Add basic support for GC 10.1.4,
it uses same IP blocks with GC 10.1.3

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix loop error handling

Clang static analysis reports this problem
kfd_chardev.c:2594:16: warning: The expression is an uninitialized value.
  The computed value will also be garbage
        while (ret && i--) {
                      ^~~

i is a loop variable and this block unwinds a problem in the loop.
When the error happens before the loop, this value is garbage.
Move the initialization of i to its decalaration.

Fixes: be072b06c739 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: extend dcn201 support

Signed-off-by: Oliver Logush <ollogush@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix freeing an unset pointer

clang static analysis reports this problem
kfd_chardev.c:2092:2: warning: 1st function call argument
  is an uninitialized value
        kvfree(bo_privs);
        ^~~~~~~~~~~~~~~~

When bo_buckets alloc fails, it jumps to an error handler
that frees the yet to be allocated bo_privs.  Because
bo_buckets is the first error, return directly.

Fixes: 5ccbb057c0a1 ("drm/amdkfd: CRIU Implement KFD checkpoint ioctl")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU return -EFAULT for copy_to_user() failure

If copy_to_user() fails, it returns the number of bytes remaining to
be copied but we want to return a negative error code (-EFAULT) to the
user.

Fixes: 9d5dabfeff3c ("drm/amdkfd: CRIU Save Shared Virtual Memory ranges")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU fix a NULL vs IS_ERR() check

The kfd_process_device_data_by_id() does not return error pointers,
it returns NULL.

Fixes: bef153b70c6e ("drm/amdkfd: CRIU implement gpu_id remapping")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix enabled features retrieving on Renoir and Cyan Skillfish

For Cyan Skillfish and Renoir, there is no interface provided by PMFW
to retrieve the enabled features. So, we assume all features are enabled.

Fixes: 7ade3ca9cdb5 ("drm/amd/pm: correct the usage for 'supported' member of smu_feature structure")

Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix gmc init fail in sriov mode

"adev->gfx.rlc.rlcg_reg_access_supported = true;"
the above varible were set too late during driver initialization.
it will cause the driver to fail to write/read register during GMC hw init
in sriov mode.

move gfx_xxx_init_rlcg_reg_access_ctrl() function to gfx early init stage
to avoid this issue.

Fixes: 5d447e29670148 ("drm/amdgpu: add helper for rlcg indirect reg access")

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct hwmon power label name

only vangogh has 2 types of hwmon power node: "fastPPT" and "slowPPT",
the other asic only has 1 type of hwmon power node: "PPT".

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/amdgpu_uvd: Fix forgotten unmap buffer object

After the buffer object is successfully mapped,
call amdgpu_bo_kunmap before the function returns.

Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/uvd: Fix forgotten unmap buffer objects

After the buffer object is successfully mapped,
call radeon_bo_kunmap before the function returns.

Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Consolidate MQD manager functions

A few MQD manager functions are duplicated for all versions of
MQD manager. Remove this duplication by moving the common
functions into kfd_mqd_manager.c file.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove unused old debugger implementation

Cleanup the kfd code by removing the unused old debugger
implementation.
The address watch was only ever implemented in the upstream
driver for GFXv7 (Kaveri). The user mode tools runtime using
this API was never open-sourced. Work on the old debugger
prototype that used this API has been discontinued years ago.
Only a small piece of resetting wavefronts is kept and
is moved to kfd_device_queue_manager.c.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix TLB flushing in KFD SVM with no HWS

With no HWS, TLB flushing will not work in SVM code.
Fix this by calling kfd_flush_tlb() which works for both
HWS and no HWS case.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix hwmon node of power1_label create issue

it will cause hwmon node of power1_label is not created.

v2:
the hwmon node of "power1_label" is always needed for all ASICs.
and the patch will remove ASIC type check for "power1_label".

Fixes: ae07970a0621d6 ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh")

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drm/amd/pm: disable GetPptLimit message in sriov mode

PPT limit cannot be queried from VF

Fixes: f3527a6483fbcc ("drm/amd/pm: Enable sysfs required by rocm-smi tool for One VF mode")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: use unmap all queues for poison consumption

Replace reset queue for specific PASID with unmap all queues, reset
queue could break CP scheduler.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: rename kfd_process_vm_fault to kfd_dqm_evict_pasid

As the function is used in more different cases, use a more general
name.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move dpcs_3_0_3 headers from dcn to dpcs

To align with other headers.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move dpcs_3_0_0 headers from dcn to dpcs

To align with other headers.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add missing license to dpcs_3_0_0 headers

MIT.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: change pipe policy for DCN 2.0

Fixes hangs on driver load with multiple displays on
DCN 2.0 parts.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215511
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1877
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1886
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: drop experimental flag on aldebaran

These have been at production level for a while. Drop
the flag.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add missing prototypes to amdgpu_dpm_internal

Include the header with the prototype to silence the following clang
warnings:

drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:29:6: warning: no
previous prototype for function 'amdgpu_dpm_get_active_displays'
[-Wmissing-prototypes]
void amdgpu_dpm_get_active_displays(struct amdgpu_device *adev)
     ^
drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:29:1: note: declare
'static' if the function is not intended to be used outside of this
translation unit
void amdgpu_dpm_get_active_displays(struct amdgpu_device *adev)
^
static
drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:76:5: warning: no
previous prototype for function 'amdgpu_dpm_get_vrefresh'
[-Wmissing-prototypes]
u32 amdgpu_dpm_get_vrefresh(struct amdgpu_device *adev)
    ^
drivers/gpu/drm/amd/amdgpu/../pm/amdgpu_dpm_internal.c:76:1: note: declare
'static' if the function is not intended to be used outside of this
translation unit
u32 amdgpu_dpm_get_vrefresh(struct amdgpu_device *adev)
^
static
2 warnings generated.

Besides that, remove the duplicated prototype of the function
amdgpu_dpm_get_vblank_time in order to keep the consistency of the
headers.

Fixes: 6ddbd37f1074 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix error handling

clang static analysis reports this error
amdgpu_smu.c:2289:9: warning: Called function pointer
  is null (null dereference)
        return smu->ppt_funcs->emit_clk_levels(
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

There is a logic error in the earlier check of
emit_clk_levels.  The error value is set to
the ret variable but ret is never used.  Return
directly and remove the unneeded ret variable.

Fixes: 5d64f9bbb628 ("amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reserve the pd while cleaning up PRTs

We want to have lockdep annotation here, so make sure that we reserve
the PD while removing PRTs even if it isn't strictly necessary since the
VM object is about to be destroyed anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move lockdep assert to the right place.

Since newly added BOs don't have any mappings it's ok to add them
without holding the VM lock. Only when we add per VM BOs the lock is
mandatory.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Bhardwaj, Rajneesh <Rajneesh.Bhardwaj@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: handle null link encoder

[Why]
The link encoder mapping could return a null one and causes system crash.

[How]
Let the mapping can get an available link encoder without endpoint
identification check.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.172

This version brings along the following fixes:
-fix for build failure uninitalized error
-Bug fix for DP2 using uncertified cable
-limit unbounded request to 5k
-fix DP LT sequence on EQ fail
-Bug fixes for S3/S4

Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.103.0

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DP LT sequence on EQ fail

[Why]
The number of lanes wasn't being reset to maximum when reducing link
rate due to an EQ failure. This could result in having fewer lanes in
the verified link capabilities, a lower maximum link bandwidth, and
fewer modes being supported.

[How]
Reset the number of lanes to max when dropping link rate due to EQ
failure during link training.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ilya <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: keep eDP Vdd on when eDP stream is already enabled

[Why]
Even if can_apply_edp_fast_boot is set to 1 at boot, this flag will
be cleared to 0 at S3 resume.

[How]
Keep eDP Vdd on when eDP stream is already enabled.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: change fastboot timing validation

[Why]
VBIOS light up eDP with 6bpc but driver use 8bpc without
disable valid stream then re-enable valid stream. Some
panels can't runtime change color depth.

[How]
Change fastboot timing validation function. Not only check
LANE_COUNT, LINK_RATE...etc

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix yellow carp wm clamping

Fix clamping to match register field size

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display/dc: do blocked MST topology discovery at resume from S3/S4

Why:
When resume from sleep or hiberation, blocked MST Topology discovery might
need to be used.

How:
Added "DETECT_REASON_RESUMEFROMS3S4" to enum dc_detect_reason; use it to
require blocked MST Topology discovery.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Bing Guo <Bing.Guo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove static from optc31_set_drr

remove static from optc31_set_drr

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: limit unbounded requesting to 5k

Unbounded requesting is unsupported on pipe split modes
and this change prevents us running into such a situation
with wide modes.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix stream->link_enc unassigned during stream removal

[Why]
Found when running igt@kms_atomic.

Userspace attempts to do a TEST_COMMIT when 0 streams which calls
dc_remove_stream_from_ctx. This in turn calls link_enc_unassign
which ends up modifying stream->link = NULL directly, causing the
global link_enc to be removed preventing further link activity
and future link validation from passing.

[How]
We take care of link_enc unassignment at the start of
link_enc_cfg_link_encs_assign so this call is no longer necessary.

Fixes global state from being modified while unlocked.

Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix for variable may be used uninitialized error

[Why]
Build failure due to ‘status’ may be used uninitialized

[How]
Initialize status to LINK_TRAINING_SUCCESS

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: revise the implementation of smu_cmn_disable_all_features_with_exception

As there is no internal cache for enabled ppfeatures now. Thus the 2nd
parameter will be not needed any more.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: avoid consecutive retrieving for enabled ppfeatures

As the enabled ppfeatures are just retrieved ahead. We can use
that directly instead of retrieving again and again.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop the cache for enabled ppfeatures

The following scenarios make the driver cache for enabled ppfeatures
outdated and invalid:
  - Other tools interact with PMFW to change the enabled ppfeatures.
  - PMFW may enable/disable some features behind driver's back. E.g.
    for sienna_cichild, on gfxoff entering, PMFW will disable gfx
    related DPM features. All those are performed without driver's
    notice.
Also considering driver does not actually interact with PMFW such
frequently, the benefit brought by such cache is very limited.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the usage for 'supported' member of smu_feature structure

The supported features should be retrieved just after EnableAllDpmFeatures message
complete. And the check(whether some dpm feature is supported) is only needed when we
decide to enable or disable it.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update the data type for retrieving enabled ppfeatures

Use uint64_t instead of an array of uint32_t. This can avoid
some non-necessary intermediate uint32_t -> uint64_t conversions.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: unify the interface for retrieving enabled ppfeatures

Instead of having two which do the same thing.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: correct the way for retrieving enabled ppfeatures on Renoir

As other dGPU asics, Renoir should use smu_cmn_get_enabled_mask() for
that job.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Cap pflip irqs per max otg number

[Why]
pflip interrupt order are mapped 1 to 1 to otg id.
e.g. if irq_src=26 corresponds to otg0 then 27->otg1, 28->otg2...

Linux DM registers pflip interrupts per number of crtcs.
In fused pipe case crtc numbers can be less than otg id.

e.g. if one pipe out of 3(otg#0-2) is fused adev->mode_info.num_crtc=2
so DM only registers irq_src 26,27.
This is a bug since if pipe#2 remains unfused DM never gets
otg2 pflip interrupt (irq_src=28)
That may results in gfx failure due to pflip timeout.

[How]
Register pflip interrupts per max num of otg instead of num_crtc

Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check the GART table before invalidating TLB

Bypass group programming (utcl2_harvest) aims to forbid UTCL2 to send
invalidation command to harvested SE/SA. Once invalidation command comes
into harvested SE/SA, SE/SA has no response and system hang.

This patch is to add checking if the GART table is already allocated before
invalidating TLB. The new procedure is as following:
1. Calling amdgpu_gtt_mgr_init() in amdgpu_ttm_init(). After this step GTT
   BOs can be allocated, but GART mappings are still ignored.
2. Calling amdgpu_gart_table_vram_alloc() from the GMC code. This allocates
   the GART backing store.
3. Initializing the hardware, and programming the backing store into VMID0
   for all VMHUBs.
4. Calling amdgpu_gtt_mgr_recover() to make sure the table is updated with
   the GTT allocations done before it was allocated.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add utcl2_harvest to gc 10.3.1

Confirmed with hardware team, there is harvesting for gc 10.3.1.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix list add issue in vram reserve

The parameter order in the list_add_tail is incorrect, it causes the
reuse of ras reserved page.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Add judgement to avoid infinite loop"

The commit d5e8ff5f7b2a ("drm/amdgpu: Fixed the defect of soft lock caused by infinite loop")
had fixed this defect.

Revert workaround
commit a2170b4af62f ("drm/amdgpu: Add judgement to avoid infinite loop").

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fixed the defect of soft lock caused by infinite loop

1. The infinite loop case only occurs on multiple cards support
   ras functions.
2. The explanation of root cause refer to commit 76641cbbf196
   ("drm/amdgpu: Add judgement to avoid infinite loop").
3. Create new node to manage each unique ras instance to guarantee
   each device .ras_list is completely independent.
4. Fixes: commit 7a6b8ab3231b51 ("drm/amdgpu: Unify ras block
   interface for each ras block").
5. The soft locked logs are as follows:
[  262.165690] CPU: 93 PID: 758 Comm: kworker/93:1 Tainted: G           OE     5.13.0-27-generic #29~20.04.1-Ubuntu
[  262.165695] Hardware name: Supermicro AS -4124GS-TNR/H12DSG-O-CPU, BIOS T20200717143848 07/17/2020
[  262.165698] Workqueue: events amdgpu_ras_do_recovery [amdgpu]
[  262.165980] RIP: 0010:amdgpu_ras_get_ras_block+0x86/0xd0 [amdgpu]
[  262.166239] Code: 68 d8 4c 8d 71 d8 48 39 c3 74 54 49 8b 45 38 48 85 c0 74 32 44 89 fa 44 89 e6 4c 89 ef e8 82 e4 9b dc 85 c0 74 3c 49 8b 46 28 <49> 8d 56 28 4d 89 f5 48 83 e8 28 48 39 d3 74 25 49 89 c6 49 8b 45
[  262.166243] RSP: 0018:ffffac908fa87d80 EFLAGS: 00000202
[  262.166247] RAX: ffffffffc1394248 RBX: ffff91e4ab8d6e20 RCX: ffffffffc1394248
[  262.166249] RDX: ffff91e4aa356e20 RSI: 000000000000000e RDI: ffff91e4ab8c0000
[  262.166252] RBP: ffffac908fa87da8 R08: 0000000000000007 R09: 0000000000000001
[  262.166254] R10: ffff91e4930b64ec R11: 0000000000000000 R12: 000000000000000e
[  262.166256] R13: ffff91e4aa356df8 R14: ffffffffc1394320 R15: 0000000000000003
[  262.166258] FS:  0000000000000000(0000) GS:ffff92238fb40000(0000) knlGS:0000000000000000
[  262.166261] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  262.166264] CR2: 00000001004865d0 CR3: 000000406d796000 CR4: 0000000000350ee0
[  262.166267] Call Trace:
[  262.166272]  amdgpu_ras_do_recovery+0x130/0x290 [amdgpu]
[  262.166529]  ? psi_task_switch+0xd2/0x250
[  262.166537]  ? __switch_to+0x11d/0x460
[  262.166542]  ? __switch_to_asm+0x36/0x70
[  262.166549]  process_one_work+0x220/0x3c0
[  262.166556]  worker_thread+0x4d/0x3f0
[  262.166560]  ? process_one_work+0x3c0/0x3c0
[  262.166563]  kthread+0x12b/0x150
[  262.166568]  ? set_kthread_struct+0x40/0x40
[  262.166571]  ret_from_fork+0x22/0x30

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set FRU bus for Aldebaran and Vega 20

The FRU and RAS EEPROMs share the same I2C bus on Aldebaran and Vega 20
ASICs. Set the FRU bus "pointer" to this single bus, as access to the FRU
is sought through that bus "pointer" and not through the RAS bus "pointer".

Cc: Roy Sun <Roy.Sun@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes: 2f60dd50769efc ("drm/amd: Expose the FRU SMU I2C bus")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix recursive locking warning

Noticed the below warning while running a pytorch workload on vega10
GPUs. Change to trylock to avoid conflicts with already held reservation
locks.

[  +0.000003] WARNING: possible recursive locking detected
[  +0.000003] 5.13.0-kfd-rajneesh #1030 Not tainted
[  +0.000004] --------------------------------------------
[  +0.000002] python/4822 is trying to acquire lock:
[  +0.000004] ffff932cd9a259f8 (reservation_ww_class_mutex){+.+.}-{3:3},
at: amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000203]
              but task is already holding lock:
[  +0.000003] ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3},
at: ttm_eu_reserve_buffers+0x270/0x470 [ttm]
[  +0.000017]
              other info that might help us debug this:
[  +0.000002]  Possible unsafe locking scenario:

[  +0.000003]        CPU0
[  +0.000002]        ----
[  +0.000002]   lock(reservation_ww_class_mutex);
[  +0.000004]   lock(reservation_ww_class_mutex);
[  +0.000003]
               *** DEADLOCK ***

[  +0.000002]  May be due to missing lock nesting notation

[  +0.000003] 7 locks held by python/4822:
[  +0.000003]  #0: ffff932c4ac028d0 (&process->mutex){+.+.}-{3:3}, at:
kfd_ioctl_map_memory_to_gpu+0x10b/0x320 [amdgpu]
[  +0.000232]  #1: ffff932c55e830a8 (&info->lock#2){+.+.}-{3:3}, at:
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x64/0xf60 [amdgpu]
[  +0.000241]  #2: ffff932cc45b5e68 (&(*mem)->lock){+.+.}-{3:3}, at:
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0xdf/0xf60 [amdgpu]
[  +0.000236]  #3: ffffb2b35606fd28
(reservation_ww_class_acquire){+.+.}-{0:0}, at:
amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x232/0xf60 [amdgpu]
[  +0.000235]  #4: ffff932cbb7181f8
(reservation_ww_class_mutex){+.+.}-{3:3}, at:
ttm_eu_reserve_buffers+0x270/0x470 [ttm]
[  +0.000015]  #5: ffffffffc045f700 (*(sspp++)){....}-{0:0}, at:
drm_dev_enter+0x5/0xa0 [drm]
[  +0.000038]  #6: ffff932c52da7078 (&vm->eviction_lock){+.+.}-{3:3},
at: amdgpu_vm_bo_update_mapping+0xd5/0x4f0 [amdgpu]
[  +0.000195]
              stack backtrace:
[  +0.000003] CPU: 11 PID: 4822 Comm: python Not tainted
5.13.0-kfd-rajneesh #1030
[  +0.000005] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F02
08/29/2018
[  +0.000003] Call Trace:
[  +0.000003]  dump_stack+0x6d/0x89
[  +0.000010]  __lock_acquire+0xb93/0x1a90
[  +0.000009]  lock_acquire+0x25d/0x2d0
[  +0.000005]  ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000184]  ? lock_is_held_type+0xa2/0x110
[  +0.000006]  ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000184]  __ww_mutex_lock.constprop.17+0xca/0x1060
[  +0.000007]  ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000183]  ? lock_release+0x13f/0x270
[  +0.000005]  ? lock_is_held_type+0xa2/0x110
[  +0.000006]  ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000183]  amdgpu_bo_release_notify+0xc4/0x160 [amdgpu]
[  +0.000185]  ttm_bo_release+0x4c6/0x580 [ttm]
[  +0.000010]  amdgpu_bo_unref+0x1a/0x30 [amdgpu]
[  +0.000183]  amdgpu_vm_free_table+0x76/0xa0 [amdgpu]
[  +0.000189]  amdgpu_vm_free_pts+0xb8/0xf0 [amdgpu]
[  +0.000189]  amdgpu_vm_update_ptes+0x411/0x770 [amdgpu]
[  +0.000191]  amdgpu_vm_bo_update_mapping+0x324/0x4f0 [amdgpu]
[  +0.000191]  amdgpu_vm_bo_update+0x251/0x610 [amdgpu]
[  +0.000191]  update_gpuvm_pte+0xcc/0x290 [amdgpu]
[  +0.000229]  ? amdgpu_vm_bo_map+0xd7/0x130 [amdgpu]
[  +0.000190]  amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x912/0xf60
[amdgpu]
[  +0.000234]  kfd_ioctl_map_memory_to_gpu+0x182/0x320 [amdgpu]
[  +0.000218]  kfd_ioctl+0x2b9/0x600 [amdgpu]
[  +0.000216]  ? kfd_ioctl_unmap_memory_from_gpu+0x270/0x270 [amdgpu]
[  +0.000216]  ? lock_release+0x13f/0x270
[  +0.000006]  ? __fget_files+0x107/0x1e0
[  +0.000007]  __x64_sys_ioctl+0x8b/0xd0
[  +0.000007]  do_syscall_64+0x36/0x70
[  +0.000004]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  +0.000007] RIP: 0033:0x7fbff90a7317
[  +0.000004] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00
48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
[  +0.000005] RSP: 002b:00007fbe301fe648 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[  +0.000006] RAX: ffffffffffffffda RBX: 00007fbcc402d820 RCX:
00007fbff90a7317
[  +0.000003] RDX: 00007fbe301fe690 RSI: 00000000c0184b18 RDI:
0000000000000004
[  +0.000003] RBP: 00007fbe301fe690 R08: 0000000000000000 R09:
00007fbcc402d880
[  +0.000003] R10: 0000000002001000 R11: 0000000000000246 R12:
00000000c0184b18
[  +0.000003] R13: 0000000000000004 R14: 00007fbf689593a0 R15:
00007fbcc402d820

Cc: Christian König <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Prevent random memory access in FRU code

Prevent random memory access in the FRU EEPROM code by passing the size of
the destination buffer to the reading routine, and reading no more than the
size of the buffer.

Cc: Kent Russell <kent.russell@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Don't offset by 2 in FRU EEPROM

Read buffers no longer expose the I2C address, and so we don't need to
offset by two when we get the read data.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Fixes: bd607166af7fe3 ("drm/amdgpu: Enable reading FRU chip via I2C v3")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Nerf "buff" to "buf"

Buffer is abbreviated "buf" (buf-fer), not "buff" (buff-er).
This is consistent with the rest of the kernel code.

Cc: Kent Russell <kent.russell@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Bump up KFD API version for CRIU

 - Change KFD minor version to 7 for CRIU

Proposed userspace changes:
https://github.com/RadeonOpenCompute/criu

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU resume shared virtual memory ranges

In CRIU resume stage, resume all the shared virtual memory ranges from
the data stored inside the resuming kfd process during CRIU restore
phase. Also setup xnack mode and free up the resources.

KFD_IOCTL_SVM_ATTR_CLR_FLAGS is not available for querying via get_attr
interface but we must clear the flags during restore as there might be
some default flags set when the prange is created. Also handle the
invalid PREFETCH atribute values saved during checkpoint by replacing
them with another dummy KFD_IOCTL_SVM_ATTR_SET_FLAGS attribute.

(rajneesh: Fixed the checkpatch reported problems)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU prepare for svm resume

During CRIU restore phase, the VMAs for the virtual address ranges are
not at their final location yet so in this stage, only cache the data
required to successfully resume the svm ranges during an imminent CRIU
resume phase.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Save Shared Virtual Memory ranges

During checkpoint stage, save the shared virtual memory ranges and
attributes for the target process. A process may contain a number of svm
ranges and each range might contain a number of attributes. While not
all attributes may be applicable for a given prange but during
checkpoint we store all possible values for the max possible attribute
types.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Discover svm ranges

A KFD process may contain a number of virtual address ranges for shared
virtual memory management and each such range can have many SVM
attributes spanning across various nodes within the process boundary.
This change reports the total number of such SVM ranges and
their total private data size by extending the PROCESS_INFO op of the the
CRIU IOCTL to discover the svm ranges in the target process and a future
patches brings in the required support for checkpoint and restore for
SVM ranges.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: use user_gpu_id for svm ranges

Currently the SVM ranges use actual_gpu_id but with Checkpoint Restore
support its possible that the SVM ranges can be resumed on another node
where the actual_gpu_id may not be same as the original (user_gpu_id)
gpu id. So modify svm code to use user_gpu_id.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU allow external mm for svm ranges

Both svm_range_get_attr and svm_range_set_attr helpers use mm struct
from current but for a Checkpoint or Restore operation, the current->mm
will fetch the mm for the CRIU master process. So modify these helpers to
accept the task mm for a target kfd process to support Checkpoint
Restore.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU checkpoint and restore xnack mode

Recoverable page faults are represented by the xnack mode setting inside
a kfd process and are used to represent the device page faults. For CR,
we don't consider negative values which are typically used for querying
the current xnack mode without modifying it.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU export BOs as prime dmabuf objects

KFD buffer objects do not associate a GEM handle with them so cannot
directly be used with libdrm to initiate a system dma (sDMA) operation
to speedup the checkpoint and restore operation so export them as dmabuf
objects and use with libdrm helper (amdgpu_bo_import) to further process
the sdma command submissions.

With sDMA, we see huge improvement in checkpoint and restore operations
compared to the generic pci based access via host data path.

Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU implement gpu_id remapping

When doing a restore on a different node, the gpu_id's on the restore
node may be different. But the user space application will still refer
use the original gpu_id's in the ioctl calls. Adding code to create a
gpu id mapping so that kfd can determine actual gpu_id during the user
ioctl's.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU checkpoint and restore events

Add support to existing CRIU ioctl's to save and restore events during
criu checkpoint and restore.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU checkpoint and restore queue control stack

Checkpoint contents of queue control stacks on CRIU dump and restore them
during CRIU restore.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU checkpoint and restore queue mqds

Checkpoint contents of queue MQD's on CRIU dump and restore them during
CRIU restore.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU restore queue doorbell id

When re-creating queues during CRIU restore, restore the queue with the
same doorbell id value used during CRIU dump.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU restore sdma id for queues

When re-creating queues during CRIU restore, restore the queue with the
same sdma id value used during CRIU dump.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU restore queue ids

When re-creating queues during CRIU restore, restore the queue with the
same queue id value used during CRIU dump.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU add queues support

Add support to existing CRIU ioctl's to save number of queues and queue
properties for each queue during checkpoint and re-create queues on
restore.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Implement KFD unpause operation

Introducing UNPAUSE op. After CRIU amdgpu plugin performs a PROCESS_INFO
op the queues will be stay in an evicted state. Once the plugin is done
draining BO contents, it is safe to perform an UNPAUSE op for the queues
to resume.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Implement KFD resume ioctl

This adds support to create userptr BOs on restore and introduces a new
ioctl op to restart memory notifiers for the restored userptr BOs.
When doing CRIU restore MMU notifications can happen anytime after we call
amdgpu_mn_register. Prevent MMU notifications until we reach stage-4 of the
restore process i.e. criu_resume ioctl op is received, and the process is
ready to be resumed. This ioctl is different from other KFD CRIU ioctls
since its called by CRIU master restore process for all the target
processes being resumed by CRIU.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Implement KFD restore ioctl

This implements the KFD CRIU Restore ioctl that lays the basic
foundation for the CRIU restore operation. It provides support to
create the buffer objects corresponding to the checkpointed image.
This ioctl creates various types of buffer objects such as VRAM,
MMIO, Doorbell, GTT based on the date sent from the userspace plugin.
The data mostly contains the previously checkpointed KFD images from
some KFD processs.

While restoring a criu process, attach old IDR values to newly
created BOs. This also adds the minimal gpu mapping support for a single
gpu checkpoint restore use case.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Implement KFD checkpoint ioctl

This adds support to discover the  buffer objects that belong to a
process being checkpointed. The data corresponding to these buffer
objects is returned to user space plugin running under criu master
context which then stores this info to recreate these buffer objects
during a restore operation.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Implement KFD process_info ioctl

This IOCTL op is expected to be called as a precursor to the actual
Checkpoint operation. This does the basic discovery into the target
process seized by CRIU and relays the information to the userspace that
utilizes it to start the Checkpoint operation via another dedicated
IOCTL op.

The process_info IOCTL op determines the number of GPUs, buffer objects
that are associated with the target process, its process id in
caller's namespace since /proc/pid/mem interface maybe used to drain
the contents of the discovered buffer objects in userspace and getpid
returns the pid of CRIU dumper process. Also the pid of a process
inside a container might be different than its global pid so return
the ns pid.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: CRIU Introduce Checkpoint-Restore APIs

Checkpoint-Restore in userspace (CRIU) is a powerful tool that can
snapshot a running process and later restore it on same or a remote
machine but expects the processes that have a device file (e.g. GPU)
associated with them, provide necessary driver support to assist CRIU
and its extensible plugin interface. Thus, In order to support the
Checkpoint-Restore of any ROCm process, the AMD Radeon Open Compute
Kernel driver, needs to provide a set of new APIs that provide
necessary VRAM metadata and its contents to a userspace component
(CRIU plugin) that can store it in form of image files.

This introduces some new ioctls which will be used to checkpoint-Restore
any KFD bound user process. KFD only allows ioctl calls from the same
process that opened the KFD file descriptor. Since these ioctls are
expected to be called from a KFD criu plugin which has elevated ptrace
attached privileges and CAP_CHECKPOINT_RESTORE capabilities attached with
the file descriptors so modify KFD to allow such calls.

(API redesigned by David Yat Sin)
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Print once if RAS unsupported

MESA polls for errors every 2-3 seconds. Printing with dev_info() causes
the dmesg log to fill up with the same message, e.g,

[18028.206676] amdgpu 0000:0b:00.0: amdgpu: df doesn't config ras function.

Make it dev_dbg_once(), as it isn't something correctible during boot or
thereafter, so printing just once is sufficient. Also sanitize the message.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: yipechai <YiPeng.Chai@amd.com>
Fixes: 8b0fb0e967c1 ("drm/amdgpu: Modify gfx block to fit for the unified ras block data and ops")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rename amdgpu_vm_bo_rmv to _del

Some people complained about the name and this matches much
more Linux naming conventions for object functions.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add some lockdep checks to the VM code

Whenever a bo_va structure is added or removed the VM and eventually
added BO should be locked.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use NULL pointer instead of plain integer

Assigning 0L to a pointer variable caused the following warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/rc_calc_fpu.c:71:40:
warning: Using plain integer as NULL pointer

In order to remove this warning, this commit assigns a NULL pointer to
the pointer variable that caused this issue.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Magali Lemes <magalilemes00@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset

   (v3)
     Rewrote patchset to order patches as (API, hw impl, usecase)

     - added API for new power management function emit_clk_levels
       This function should duplicate the functionality of print_clk_levels,
       but this solution passes the buffer base and write offset down the stack.
     - new powerplay function emit_clock_levels, implemented by smu_emit_ppclk_levels()
       This function parallels the implementation of smu_print_ppclk_levels and
       calls emit_clk_levels, and allows the returns of errors
     - new helper function smu_convert_to_smuclk called by smu_print_ppclk_levels and
       smu_emit_ppclk_levels

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-By: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: limit the number of dst address in trace

trace_amdgpu_vm_update_ptes trace unable to log when nptes too large

Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled

dGPUs connected to Intel systems configured for suspend to idle
will not have the power rails cut at suspend and resetting the GPU
may lead to problematic behaviors.

Fixes: e25443d2765f4 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: restructure amdgpu_fill_buffer v2

We ran into the problem that clearing really larger buffer (60GiB) caused an
SDMA timeout.

Restructure the function to use the dst window instead of mapping the whole
buffer into the GART and then fill only 2MiB/256MiB chunks at a time.

v2: rebase on restructured window map.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rework GART copy window handling

Instead of limiting the size before we call the mapping
function let the function itself limit the size.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: lower BUG_ON into WARN_ON for AMDGPU_PL_PREEMPT

That should never happen, but make sure that we only warn instead of
crash.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix logic inversion in check

We probably never trigger this, but the logic inside the check is
inverted.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels

The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.

For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.

Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.

Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clean up some inconsistent indenting

Eliminate the follow smatch warning:
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c:2246
dp_perform_8b_10b_link_training() warn: inconsistent indenting

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Trigger DP2 Sequence With Uncertified Cable

DP2 sequence is triggered only if VESA certified cable is detected.

Force DP2 sequence with uncertified cable for testing purpose.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>