memblock/nobootmem: allow alloc_bootmem() to take 0 as low limit

The bootmem wrapper with memblock supports top-down now, so we do not need
to set the low limit to __pa(MAX_DMA_ADDRESS).

The logic should be: good to allocate above __pa(MAX_DMA_ADDRESS), but it
is ok if we can not find memory above 16M on system that has a small
amount of RAM.

Signed-off-by: Yinghai LU <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: delete non-atomic mm counter implementation

The problem with having two different types of counters is that developers
adding new code need to keep in mind whether it's safe to use both the
atomic and non-atomic implementations.  For example, when adding new
callers of the *_mm_counter() functions a developer needs to ensure that
those paths are always executed with page_table_lock held, in case we're
using the non-atomic implementation of mm counters.

Hugh Dickins introduced the atomic mm counters in commit f412ac08c986
("[PATCH] mm: fix rss and mmlist locking").  When asked why he left the
non-atomic counters around he said,

  | The only reason was to avoid adding costly atomic operations into a
  | configuration that had no need for them there: the page_table_lock
  | sufficed.
  |
  | Certainly it would be simpler just to delete the non-atomic variant.
  |
  | And I think it's fair to say that any configuration on which we're
  | measuring performance to that degree (rather than "does it boot fast?"
  | type measurements), would already be going the split ptlocks route.

Removing the non-atomic counters eases the maintenance burden because
developers no longer have to mindful of the two implementations when using
*_mm_counter().

Note that all architectures provide a means of atomically updating
atomic_long_t variables, even if they have to revert to the generic
spinlock implementation because they don't support 64-bit atomic
instructions (see lib/atomic64.c).

Signed-off-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fail GFP_DMA allocations when ZONE_DMA is not configured

The page allocator will improperly return a page from ZONE_NORMAL even
when __GFP_DMA is passed if CONFIG_ZONE_DMA is disabled.  The caller
expects DMA memory, perhaps for ISA devices with 16-bit address registers,
and may get higher memory resulting in undefined behavior.

This patch causes the page allocator to return NULL in such circumstances
with a warning emitted to the kernel log on the first occurrence.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: do not define PFN_SECTION_SHIFT if !CONFIG_SPARSEMEM

Do not define PFN_SECTION_SHIFT if !CONFIG_SPARSEMEM.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: pfn_to_section_nr()/section_nr_to_pfn() is valid only in CONFIG_SPARSEMEM context

pfn_to_section_nr()/section_nr_to_pfn() is valid only in CONFIG_SPARSEMEM
context.  Move it to proper place.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: enable set_page_section() only if CONFIG_SPARSEMEM and !CONFIG_SPARSEMEM_VMEMMAP

set_page_section() is meaningful only in CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP context.  Move it to proper place and amend
accordingly functions which are using it.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove dependency on CONFIG_FLATMEM from online_page()

online_pages() is only compiled for CONFIG_MEMORY_HOTPLUG_SPARSE, so there
is no need to support CONFIG_FLATMEM code within it.

This patch removes code that is never used.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: filter unevictable page out in deactivate_page()

It's pointless that deactive_page's operates on unevictable pages.  This
patch removes unnecessary overhead which might be a bit problem in case
that there are many unevictable page in system(ex, mprotect workload)

[akpm@linux-foundation.org: tidy up comment]
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel<riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

readahead: trigger mmap sequential readahead on PG_readahead

Previously the mmap sequential readahead is triggered by updating
ra->prev_pos on each page fault and compare it with current page offset.

It costs dirtying the cache line on each _minor_ page fault.  So remove
the ra->prev_pos recording, and instead tag PG_readahead to trigger the
possible sequential readahead.  It's not only more simple, but also will
work more reliably and reduce cache line bouncing on concurrent page
faults on shared struct file.

In the mosbench exim benchmark which does multi-threaded page faults on
shared struct file, the ra->mmap_miss and ra->prev_pos updates are found
to cause excessive cache line bouncing on tmpfs, which actually disabled
readahead totally (shmem_backing_dev_info.ra_pages == 0).

So remove the ra->prev_pos recording, and instead tag PG_readahead to
trigger the possible sequential readahead.  It's not only more simple, but
also will work more reliably on concurrent reads on shared struct file.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Tim Chen <tim.c.chen@intel.com>
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

readahead: reduce unnecessary mmap_miss increases

The original INT_MAX is too large, reduce it to

- avoid unnecessarily dirtying/bouncing the cache line

- restore mmap read-around faster on changed access pattern

Background: in the mosbench exim benchmark which does multi-threaded page
faults on shared struct file, the ra->mmap_miss updates are found to cause
excessive cache line bouncing on tmpfs.  The ra state updates are needless
for tmpfs because it actually disabled readahead totally
(shmem_backing_dev_info.ra_pages == 0).

Tested-by: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

readahead: return early when readahead is disabled

Reduce readahead overheads by returning early in do_sync_mmap_readahead().

tmpfs has ra_pages=0 and it can page fault really fast (not constraint by
IO if not swapping).

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Tim Chen <tim.c.chen@intel.com>
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: change shrinker API by passing shrink_control struct

Change each shrinker's API by consolidating the existing parameters into
shrink_control struct.  This will simplify any further features added w/o
touching each file of shrinker.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: fix warning]
[kosaki.motohiro@jp.fujitsu.com: fix up new shrinker API]
[akpm@linux-foundation.org: fix xfs warning]
[akpm@linux-foundation.org: update gfs2]
Signed-off-by: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: change shrink_slab() interfaces by passing shrink_control

Consolidate the existing parameters to shrink_slab() into a new
shrink_control struct.  This is needed later to pass the same struct to
shrinkers.

Signed-off-by: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

readahead: readahead page allocations are OK to fail

Pass __GFP_NORETRY|__GFP_NOWARN for readahead page allocations.

readahead page allocations are completely optional.  They are OK to fail
and in particular shall not trigger OOM on themselves.

Reported-by: Dave Young <hidave.darkstar@gmail.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: check if any page in a pageblock is reserved before marking it MIGRATE_RESERVE

This fixes a problem where the first pageblock got marked MIGRATE_RESERVE
even though it only had a few free pages.  eg, On current ARM port, The
kernel starts at offset 0x8000 to leave room for boot parameters, and the
memory is freed later.

This in turn caused no contiguous memory to be reserved and frequent
kswapd wakeups that emptied the caches to get more contiguous memory.

Unfortunatelly, ARM needs order-2 allocation for pgd (see
arm/mm/pgd.c#pgd_alloc()).  Therefore the issue is not minor nor easy
avoidable.

[kosaki.motohiro@jp.fujitsu.com: added some explanation]
[kosaki.motohiro@jp.fujitsu.com: add !pfn_valid_within() to check]
[minchan.kim@gmail.com: check end_pfn in pageblock_is_reserved]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m32r, mm: set all online nodes in N_NORMAL_MEMORY

For m32r, N_NORMAL_MEMORY represents all nodes that have present memory
since it does not support HIGHMEM.  This patch sets the bit at the time
the node is initialized.

If N_NORMAL_MEMORY is not accurate, slub may encounter errors since it
uses this nodemask to setup per-cache kmem_cache_node data structures.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha, mm: set all online nodes in N_NORMAL_MEMORY

For alpha, N_NORMAL_MEMORY represents all nodes that have present memory
since it does not support HIGHMEM.  This patch sets the bit at the time
the node is initialized.

If N_NORMAL_MEMORY is not accurate, slub may encounter errors since it
uses this nodemask to setup per-cache kmem_cache_node data structures.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: strictly require elevated page refcount in isolate_lru_page()

isolate_lru_page() must be called only with stable reference to the page,
this is what is written in the comment above it, this is reasonable.

current isolate_lru_page() users and its page extra reference sources:

 mm/huge_memory.c:
  __collapse_huge_page_isolate() - reference from pte

 mm/memcontrol.c:
  mem_cgroup_move_parent() - get_page_unless_zero()
  mem_cgroup_move_charge_pte_range() - reference from pte

 mm/memory-failure.c:
  soft_offline_page() - fixed, reference from get_any_page()
  delete_from_lru_cache() - reference from caller or get_page_unless_zero()
[ seems like there bug, because __memory_failure() can call
  page_action() for hpages tail, but it is ok for
  isolate_lru_page(), tail getted and not in lru]

 mm/memory_hotplug.c:
  do_migrate_range() - fixed, get_page_unless_zero()

 mm/mempolicy.c:
  migrate_page_add() - reference from pte

 mm/migrate.c:
  do_move_page_to_node_array() - reference from follow_page()

 mlock.c: - various external references

 mm/vmscan.c:
  putback_lru_page() - reference from isolate_lru_page()

It seems that all isolate_lru_page() users are ready now for this
restriction.  So, let's replace redundant get_page_unless_zero() with
get_page() and add page initial reference count check with VM_BUG_ON()

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mem-hwpoison: fix page refcount around isolate_lru_page()

Drop first page reference only after calling isolate_lru_page() to keep
page stable reference while isolating.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mem-hotplug: call isolate_lru_page with elevated refcount

isolate_lru_page() must be called only with stable reference to page.  So,
let's grab normal page reference.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: print vmalloc() state after allocation failures

I was tracking down a page allocation failure that ended up in vmalloc().
Since vmalloc() uses 0-order pages, if somebody asks for an insane amount
of memory, we'll still get a warning with "order:0" in it.  That's not
very useful.

During recovery, vmalloc() also nicely frees all of the memory that it got
up to the point of the failure.  That is wonderful, but it also quickly
hides any issues.  We have a much different sitation if vmalloc()
repeatedly fails 10GB in to:

vmalloc(100 * 1<<30);

versus repeatedly failing 4096 bytes in to a:

vmalloc(8192);

This patch will print out messages that look like this:

[   68.123503] vmalloc: allocation failure, allocated 6680576 of 13426688 bytes
[   68.124218] bash: page allocation failure: order:0, mode:0xd2
[   68.124811] Pid: 3770, comm: bash Not tainted 2.6.39-rc3-00082-g85f2e68-dirty #333
[   68.125579] Call Trace:
[   68.125853]  [<ffffffff810f6da6>] warn_alloc_failed+0x146/0x170
[   68.126464]  [<ffffffff8107e05c>] ? printk+0x6c/0x70
[   68.126791]  [<ffffffff8112b5d4>] ? alloc_pages_current+0x94/0xe0
[   68.127661]  [<ffffffff8111ed37>] __vmalloc_node_range+0x237/0x290
...

The 'order' variable is added for clarity when calling warn_alloc_failed()
to avoid having an unexplained '0' as an argument.

The 'tmp_mask' is because adding an open-coded '| __GFP_NOWARN' would take
us over 80 columns for the alloc_pages_node() call.  If we are going to
add a line, it might as well be one that makes the sucker easier to read.

As a side issue, I also noticed that ctl_ioctl() does vmalloc() based
solely on an unverified value passed in from userspace.  Granted, it's
under CAP_SYS_ADMIN, but it still frightens me a bit.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: break out page allocation warning code

This originally started as a simple patch to give vmalloc() some more
verbose output on failure on top of the plain page allocator messages.
Johannes suggested that it might be nicer to lead with the vmalloc() info
_before_ the page allocator messages.

But, I do think there's a lot of value in what __alloc_pages_slowpath()
does with its filtering and so forth.

This patch creates a new function which other allocators can call instead
of relying on the internal page allocator warnings.  It also gives this
function private rate-limiting which separates it from other
printk_ratelimit() users.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: convert mm->cpu_vm_cpumask into cpumask_var_t

cpumask_t is very big struct and cpu_vm_mask is placed wrong position.
It might lead to reduce cache hit ratio.

This patch has two change.
1) Move the place of cpumask into last of mm_struct. Because usually cpumask
   is accessed only front bits when the system has cpu-hotplug capability
2) Convert cpu_vm_mask into cpumask_var_t. It may help to reduce memory
   footprint if cpumask_size() will use nr_cpumask_bits properly in future.

In addition, this patch change the name of cpu_vm_mask with cpu_vm_mask_var.
It may help to detect out of tree cpu_vm_mask users.

This patch has no functional change.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: thp: optimize memcg charge in khugepaged

We don't need to hold the mmmap_sem through mem_cgroup_newpage_charge(),
the mmap_sem is only hold for keeping the vma stable and we don't need the
vma stable anymore after we return from alloc_hugepage_vma().

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: uninline large generic tlb.h functions

Some of these functions have grown beyond inline sanity, move them
out-of-line.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Requested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: optimize page_lock_anon_vma() fast-path

Optimize the page_lock_anon_vma() fast path to be one atomic op, instead
of two.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: convert anon_vma->lock to a mutex

Straightforward conversion of anon_vma->lock to a mutex.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use refcounts for page_lock_anon_vma()

Convert page_lock_anon_vma() over to use refcounts.  This is done to
prepare for the conversion of anon_vma from spinlock to mutex.

Sadly this inceases the cost of page_lock_anon_vma() from one to two
atomics, a follow up patch addresses this, lets keep that simple for now.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: improve page_lock_anon_vma() comment

A slightly more verbose comment to go along with the trickery in
page_lock_anon_vma().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: revert page_lock_anon_vma() lock annotation

Its beyond ugly and gets in the way.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: Convert i_mmap_lock to a mutex

Straightforward conversion of i_mmap_lock to a mutex.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: Remove i_mmap_lock lockbreak

Hugh says:
 "The only significant loser, I think, would be page reclaim (when
  concurrent with truncation): could spin for a long time waiting for
  the i_mmap_mutex it expects would soon be dropped? "

Counter points:
 - cpu contention makes the spin stop (need_resched())
 - zap pages should be freeing pages at a higher rate than reclaim
   ever can

I think the simplification of the truncate code is definitely worth it.

Effectively reverts: 2aa15890f3c ("mm: prevent concurrent
unmap_mapping_range() on the same inode") and takes out the code that
caused its problem.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lockdep, mutex: provide mutex_lock_nest_lock

In order to convert i_mmap_lock to a mutex we need a mutex equivalent to
spin_lock_nest_lock(), thus provide the mutex_lock_nest_lock() annotation.

As with spin_lock_nest_lock(), mutex_lock_nest_lock() allows annotation of
the locking pattern where an outer lock serializes the acquisition order
of nested locks.  That is, if every time you lock multiple locks A, say A1
and A2 you first acquire N, the order of acquiring A1 and A2 is
irrelevant.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: extended batches for generic mmu_gather

Instead of using a single batch (the small on-stack, or an allocated
page), try and extend the batch every time it runs out and only flush once
either the extend fails or we're done.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Requested-by: Nick Piggin <npiggin@kernel.dk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, powerpc: move the RCU page-table freeing into generic code

In case other architectures require RCU freed page-tables to implement
gup_fast() and software filled hashes and similar things, provide the
means to do so by moving the logic into generic code.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Requested-by: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: now that all old mmu_gather code is gone, remove the storage

Fold all the mmu_gather rework patches into one for submission

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

um: mmu_gather rework

Fix up the um mmu_gather code to conform to the new API.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64: mmu_gather rework

Fix up the ia64 mmu_gather code to conform to the new API.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: mmu_gather rework

Fix up the sh mmu_gather code to conform to the new API.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm: mmu_gather rework

Fix up the arm mmu_gather code to conform to the new API.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s390: mmu_gather rework

Adapt the stand-alone s390 mmu_gather implementation to the new
preemptible mmu_gather interface.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparc: mmu_gather rework

Rework the sparc mmu_gather usage to conform to the new world order :-)

Sparc mmu_gather does two things:
 - tracks vaddrs to unhash
 - tracks pages to free

Split these two things like powerpc has done and keep the vaddrs
in per-cpu data structures and flush them on context switch.

The remaining bits can then use the generic mmu_gather.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc: mmu_gather rework

Fix up powerpc to the new mmu_gather stuff.

PPC has an extra batching queue to RCU free the actual pagetable
allocations, use the ARCH extentions for that for now.

For the ppc64_tlb_batch, which tracks the vaddrs to unhash from the
hardware hash-table, keep using per-cpu arrays but flush on context switch
and use a TLF bit to track the lazy_mmu state.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: mmu_gather rework

Rework the existing mmu_gather infrastructure.

The direct purpose of these patches was to allow preemptible mmu_gather,
but even without that I think these patches provide an improvement to the
status quo.

The first 9 patches rework the mmu_gather infrastructure.  For review
purpose I've split them into generic and per-arch patches with the last of
those a generic cleanup.

The next patch provides generic RCU page-table freeing, and the followup
is a patch converting s390 to use this.  I've also got 4 patches from
DaveM lined up (not included in this series) that uses this to implement
gup_fast() for sparc64.

Then there is one patch that extends the generic mmu_gather batching.

After that follow the mm preemptibility patches, these make part of the mm
a lot more preemptible.  It converts i_mmap_lock and anon_vma->lock to
mutexes which together with the mmu_gather rework makes mmu_gather
preemptible as well.

Making i_mmap_lock a mutex also enables a clean-up of the truncate code.

This also allows for preemptible mmu_notifiers, something that XPMEM I
think wants.

Furthermore, it removes the new and universially detested unmap_mutex.

This patch:

Remove the first obstacle towards a fully preemptible mmu_gather.

The current scheme assumes mmu_gather is always done with preemption
disabled and uses per-cpu storage for the page batches.  Change this to
try and allocate a page for batching and in case of failure, use a small
on-stack array to make some progress.

Preemptible mmu_gather is desired in general and usable once i_mmap_lock
becomes a mutex.  Doing it before the mutex conversion saves us from
having to rework the code by moving the mmu_gather bits inside the
pte_lock.

Also avoid flushing the tlb batches from under the pte lock, this is
useful even without the i_mmap_lock conversion as it significantly reduces
pte lock hold times.

[akpm@linux-foundation.org: fix comment tpyo]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make expand_downwards() symmetrical with expand_upwards()

Currently we have expand_upwards exported while expand_downwards is
accessible only via expand_stack or expand_stack_downwards.

check_stack_guard_page is a nice example of the asymmetry.  It uses
expand_stack for VM_GROWSDOWN while expand_upwards is called for
VM_GROWSUP case.

Let's clean this up by exporting both functions and make those names
consistent.  Let's use expand_{upwards,downwards} because expanding
doesn't always involve stack manipulation (an example is
ia64_do_page_fault which uses expand_upwards for registers backing store
expansion).  expand_downwards has to be defined for both
CONFIG_STACK_GROWS{UP,DOWN} because get_arg_page calls the downwards
version in the early process initialization phase for growsup
configuration.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc: remove guard page from between vmap blocks

The vmap allocator is used to, among other things, allocate per-cpu vmap
blocks, where each vmap block is naturally aligned to its own size.
Obviously, leaving a guard page after each vmap area forbids packing vmap
blocks efficiently and can make the kernel run out of possible vmap blocks
long before overall vmap space is exhausted.

The new interface to map a user-supplied page array into linear vmalloc
space (vm_map_ram) insists on allocating from a vmap block (instead of
falling back to a custom area) when the area size is below a certain
threshold.  With heavy users of this interface (e.g.  XFS) and limited
vmalloc space on 32-bit, vmap block exhaustion is a real problem.

Remove the guard page from the core vmap allocator.  vmalloc and the old
vmap interface enforce a guard page on their own at a higher level.

Note that without this patch, we had accidental guard pages after those
vm_map_ram areas that happened to be at the end of a vmap block, but not
between every area.  This patch removes this accidental guard page only.

If we want guard pages after every vm_map_ram area, this should be done
separately.  And just like with vmalloc and the old interface on a
different level, not in the core allocator.

Mel pointed out: "If necessary, the guard page could be reintroduced as a
debugging-only option (CONFIG_DEBUG_PAGEALLOC?).  Otherwise it seems
reasonable."

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Dave Chinner <david@fromorbit.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/gfp.h: convert BUG_ON() into VM_BUG_ON()

VM_BUG_ON() if effectively a BUG_ON() undef #ifdef CONFIG_DEBUG_VM.  That
is exactly what we have here now, and two different folks have suggested
doing it this way.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/gfp.h: work around apparent sparse confusion

Running sparse on page_alloc.c today, it errors out:
        include/linux/gfp.h:254:17: error: bad constant expression
        include/linux/gfp.h:254:17: error: cannot size expression

which is a line in gfp_zone():

        BUILD_BUG_ON((GFP_ZONE_BAD >> bit) & 1);

That's really unfortunate, because it ends up hiding all of the other
legitimate sparse messages like this:
        mm/page_alloc.c:5315:59: warning: incorrect type in argument 1 (different base types)
        mm/page_alloc.c:5315:59:    expected unsigned long [unsigned] [usertype] size
        mm/page_alloc.c:5315:59:    got restricted gfp_t [usertype] <noident>
...

Having sparse be able to catch these very oopsable bugs is a lot more
important than keeping a BUILD_BUG_ON().  Kill the BUILD_BUG_ON().

Compiles on x86_64 with and without CONFIG_DEBUG_VM=y.  defconfig boots
fine for me.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: replace PF_OOM_ORIGIN with toggling oom_score_adj

There's a kernel-wide shortage of per-process flags, so it's always
helpful to trim one when possible without incurring a significant penalty.
 It's even more important when you're planning on adding a per- process
flag yourself, which I plan to do shortly for transparent hugepages.

PF_OOM_ORIGIN is used by ksm and swapoff to prefer current since it has a
tendency to allocate large amounts of memory and should be preferred for
killing over other tasks.  We'd rather immediately kill the task making
the errant syscall rather than penalizing an innocent task.

This patch removes PF_OOM_ORIGIN since its behavior is equivalent to
setting the process's oom_score_adj to OOM_SCORE_ADJ_MAX.

The process's old oom_score_adj is stored and then set to
OOM_SCORE_ADJ_MAX during the time it used to have PF_OOM_ORIGIN.  The old
value is then reinstated when the process should no longer be considered a
high priority for oom killing.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction: reverse the change that forbade sync migraton with __GFP_NO_KSWAPD

It's uncertain this has been beneficial, so it's safer to undo it.  All
other compaction users would still go in synchronous mode if a first
attempt at async compaction failed.  Hopefully we don't need to force
special behavior for THP (which is the only __GFP_NO_KSWAPD user so far
and it's the easier to exercise and to be noticeable).  This also make
__GFP_NO_KSWAPD return to its original strict semantics specific to bypass
kswapd, as THP allocations have khugepaged for the async THP
allocations/compactions.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alex Villacis Lasso <avillaci@fiec.espol.edu.ec>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, mem-hotplug: update pcp->stat_threshold when memory hotplug occur

Currently, cpu hotplug updates pcp->stat_threshold, but memory hotplug
doesn't.  There is no reason for this.

[akpm@linux-foundation.org: fix CONFIG_SMP=n build]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, mem-hotplug: recalculate lowmem_reserve when memory hotplug occurs

Currently, memory hotplug calls setup_per_zone_wmarks() and
calculate_zone_inactive_ratio(), but doesn't call
setup_per_zone_lowmem_reserve().

It means the number of reserved pages aren't updated even if memory hot
plug occur.  This patch fixes it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, mem-hotplug: fix section mismatch. setup_per_zone_inactive_ratio() should be __meminit.

Commit bce7394a3e ("page-allocator: reset wmark_min and inactive ratio of
zone when hotplug happens") introduced invalid section references.  Now,
setup_per_zone_inactive_ratio() is marked __init and then it can't be
referenced from memory hotplug code.

This patch marks it as __meminit and also marks caller as __ref.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86,mm: make pagefault killable

When an oom killing occurs, almost all processes are getting stuck at the
following two points.

1) __alloc_pages_nodemask
2) __lock_page_or_retry

1) is not very problematic because TIF_MEMDIE leads to an allocation
failure and getting out from page allocator.

2) is more problematic.  In an OOM situation, zones typically don't have
page cache at all and memory starvation might lead to greatly reduced IO
performance.  When a fork bomb occurs, TIF_MEMDIE tasks don't die quickly,
meaning that a fork bomb may create new process quickly rather than the
oom-killer killing it.  Then, the system may become livelocked.

This patch makes the pagefault interruptible by SIGKILL.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: introduce wait_on_page_locked_killable()

commit 2687a356 ("Add lock_page_killable") introduced killable
lock_page().  Similarly this patch introdues killable
wait_on_page_locked().

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: per-node vmstat: show proper vmstats

commit 2ac390370a ("writeback: add
/sys/devices/system/node/<node>/vmstat") added vmstat entry.  But
strangely it only show nr_written and nr_dirtied.

        # cat /sys/devices/system/node/node20/vmstat
        nr_written 0
        nr_dirtied 0

Of course, It's not adequate.  With this patch, the vmstat show all vm
stastics as /proc/vmstat.

        # cat /sys/devices/system/node/node0/vmstat
nr_free_pages 899224
nr_inactive_anon 201
nr_active_anon 17380
nr_inactive_file 31572
nr_active_file 28277
nr_unevictable 0
nr_mlock 0
nr_anon_pages 17321
nr_mapped 8640
nr_file_pages 60107
nr_dirty 33
nr_writeback 0
nr_slab_reclaimable 6850
nr_slab_unreclaimable 7604
nr_page_table_pages 3105
nr_kernel_stack 175
nr_unstable 0
nr_bounce 0
nr_vmscan_write 0
nr_writeback_temp 0
nr_isolated_anon 0
nr_isolated_file 0
nr_shmem 260
nr_dirtied 1050
nr_written 938
numa_hit 962872
numa_miss 0
numa_foreign 0
numa_interleave 8617
numa_local 962872
numa_other 0
nr_anon_transparent_hugepages 0

[akpm@linux-foundation.org: no externs in .c files]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: nommu: fix a compile warning in do_mmap_pgoff()

Because 'ret' is declared as int, not unsigned long, no need to cast the
error contants into unsigned long.  If you compile this code on a 64-bit
machine somehow, you'll see following warning:

    CC      mm/nommu.o
  mm/nommu.c: In function `do_mmap_pgoff':
  mm/nommu.c:1411: warning: overflow in implicit constant conversion

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: nommu: fix a potential memory leak in do_mmap_private()

If f_op->read() fails and sysctl_nr_trim_pages > 1, there could be a
memory leak between @region->vm_end and @region->vm_top.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: nommu: check the vma list when unmapping file-mapped vma

Now we have the sorted vma list, use it in do_munmap() to check that we
have an exact match.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: nommu: find vma using the sorted vma list

Now we have the sorted vma list, use it in the find_vma[_exact]() rather
than doing linear search on the rb-tree.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: nommu: don't scan the vma list when deleting

Since commit 297c5eee3724 ("mm: make the vma list be doubly linked") made
it a doubly linked list, we don't need to scan the list when deleting
@vma.

And the original code didn't update the prev pointer. Fix it too.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: nommu: sort mm->mmap list properly

When I was reading nommu code, I found that it handles the vma list/tree
in an unusual way.  IIUC, because there can be more than one
identical/overrapped vmas in the list/tree, it sorts the tree more
strictly and does a linear search on the tree.  But it doesn't applied to
the list (i.e.  the list could be constructed in a different order than
the tree so that we can't use the list when finding the first vma in that
order).

Since inserting/sorting a vma in the tree and link is done at the same
time, we can easily construct both of them in the same order.  And linear
searching on the tree could be more costly than doing it on the list, it
can be converted to use the list.

Also, after the commit 297c5eee3724 ("mm: make the vma list be doubly
linked") made the list be doubly linked, there were a couple of code need
to be fixed to construct the list properly.

Patch 1/6 is a preparation.  It maintains the list sorted same as the tree
and construct doubly-linked list properly.  Patch 2/6 is a simple
optimization for the vma deletion.  Patch 3/6 and 4/6 convert tree
traversal to list traversal and the rest are simple fixes and cleanups.

This patch:

@vma added into @mm should be sorted by start addr, end addr and VMA
struct addr in that order because we may get identical VMAs in the @mm.
However this was true only for the rbtree, not for the list.

This patch fixes this by remembering 'rb_prev' during the tree traversal
like find_vma_prepare() does and linking the @vma via __vma_link_list().
After this patch, we can iterate the whole VMAs in correct order simply by
using @mm->mmap list.

[akpm@linux-foundation.org: avoid duplicating __vma_link_list()]
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove unused zone_idx variable from set_migratetype_isolate

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap: avoid merging cloned VMAs

Avoid merging a VMA with another VMA which is cloned from the parent process.

The cloned VMA shares the anon_vma lock with the parent process's VMA.  If
we do the merge, more vmas (even the new range is only for current
process) use the perent process's anon_vma lock.  This introduces
scalability issues.  find_mergeable_anon_vma() already considers this
case.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap: avoid unnecessary anon_vma lock

If we only change vma->vm_end, we can avoid taking anon_vma lock even if
'insert' isn't NULL, which is the case of split_vma.

As I understand it, we need the lock before because rmap must get the
'insert' VMA when we adjust old VMA's vm_end (the 'insert' VMA is linked
to anon_vma list in __insert_vm_struct before).

But now this isn't true any more.  The 'insert' VMA is already linked to
anon_vma list in __split_vma(with anon_vma_clone()) instead of
__insert_vm_struct.  There is no race rmap can't get required VMAs.  So
the anon_vma lock is unnecessary, and this can reduce one locking in brk
case and improve scalability.

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap: add alignment for some variables

Make some variables have correct alignment/section to avoid cache issue.
In a workload which heavily does mmap/munmap, the variables will be used
frequently.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch, mm: filter disallowed nodes from arch specific show_mem functions

Architectures that implement their own show_mem() function did not pass
the filter argument to show_free_areas() to appropriately avoid emitting
the state of nodes that are disallowed in the current context.  This patch
now passes the filter argument to show_free_areas() so those nodes are now
avoided.

This patch also removes the show_free_areas() wrapper around
__show_free_areas() and converts existing callers to pass an empty filter.

ia64 emits additional information for each node, so skip_free_areas_zone()
must be made global to filter disallowed nodes and it is converted to use
a nid argument rather than a zone for this use case.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <jejb@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xtensa/mm: remove WANT_PAGE_VIRTUAL

This is not useful: it provides page->virtual and is used with highmem.
xtensa has no support for highmem and those HIGHMEM bits which are found
by grep are partly implemented.  The interesting functions like kmap() are
missing.  If someone actually implements the complete HIGHMEM support he
could use HASHED_PAGE_VIRTUAL like most others do.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Chris Zankel <chris@zankel.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xtensa/mm: remove pgtable.c

It is not referenced by any Makefile.  pte_alloc_one_kernel() and
pte_alloc_one() is implemented in arch/xtensa/include/asm/pgalloc.h.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Chris Zankel <chris@zankel.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/adp5520_bl.c: check strict_strtoul() return value

It should check if strict_strtoul() succeeds.

[akpm@linux-foundation.org: don't override strict_strtoul() return value]
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: correctly check if reclaimer should schedule during shrink_slab

It has been reported on some laptops that kswapd is consuming large
amounts of CPU and not being scheduled when SLUB is enabled during large
amounts of file copying.  It is expected that this is due to kswapd
missing every cond_resched() point because;

shrink_page_list() calls cond_resched() if inactive pages were isolated
        which in turn may not happen if all_unreclaimable is set in
        shrink_zones(). If for whatver reason, all_unreclaimable is
        set on all zones, we can miss calling cond_resched().

balance_pgdat() only calls cond_resched if the zones are not
        balanced. For a high-order allocation that is balanced, it
        checks order-0 again. During that window, order-0 might have
        become unbalanced so it loops again for order-0 and returns
        that it was reclaiming for order-0 to kswapd(). It can then
        find that a caller has rewoken kswapd for a high-order and
        re-enters balance_pgdat() without ever calling cond_resched().

shrink_slab only calls cond_resched() if we are reclaiming slab
pages. If there are a large number of direct reclaimers, the
shrinker_rwsem can be contended and prevent kswapd calling
cond_resched().

This patch modifies the shrink_slab() case.  If the semaphore is
contended, the caller will still check cond_resched().  After each
successful call into a shrinker, the check for cond_resched() remains in
case one shrinker is particularly slow.

[mgorman@suse.de: preserve call to cond_resched after each call into shrinker]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Colin King <colin.king@canonical.com>
Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org> [2.6.38+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: correct use of pgdat_balanced in sleeping_prematurely

There are a few reports of people experiencing hangs when copying large
amounts of data with kswapd using a large amount of CPU which appear to be
due to recent reclaim changes.  SLUB using high orders is the trigger but
not the root cause as SLUB has been using high orders for a while.  The
root cause was bugs introduced into reclaim which are addressed by the
following two patches.

Patch 1 corrects logic introduced by commit 1741c877 ("mm: kswapd:
        keep kswapd awake for high-order allocations until a percentage of
        the node is balanced") to allow kswapd to go to sleep when
        balanced for high orders.

Patch 2 notes that it is possible for kswapd to miss every
        cond_resched() and updates shrink_slab() so it'll at least reach
        that scheduling point.

Chris Wood reports that these two patches in isolation are sufficient to
prevent the system hanging.  AFAIK, they should also resolve similar hangs
experienced by James Bottomley.

This patch:

Johannes Weiner poined out that the logic in commit 1741c877 ("mm: kswapd:
keep kswapd awake for high-order allocations until a percentage of the
node is balanced") is backwards.  Instead of allowing kswapd to go to
sleep when balancing for high order allocations, it keeps it kswapd
running uselessly.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Colin King <colin.king@canonical.com>
Cc: Raghavendra D Prabhu <raghu.prabhu13@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org> [2.6.38+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: Fix double bit unlock in debug mode

Commit 442b06bcea23 ("slub: Remove node check in slab_free") added a
call to deactivate_slab() in the debug case in __slab_alloc(), which
unlocks the current slab used for allocation.  Going to the label
'unlock_out' then does it again.

Also, in the debug case we do not need all the other processing that the
'unlock_out' path does.  We always fall back to the slow path in the
debug case.  So the tid update is useless.

Similarly, ALLOC_SLOWPATH would just be incremented for all allocations.
Also a pretty useless thing.

So simply restore irq flags and return the object.

Signed-off-by: Christoph Lameter <cl@linux.com>
Reported-and-bisected-by: James Morris <jmorris@namei.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Jens Axboe <jaxboe@fusionio.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux

* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits)
  mach-ux500: set proper I2C platform data from MOP500s
  i2c-nomadik: break out single messsage transmission
  i2c-nomadik: reset the hw after status check
  i2c-nomadik: remove the unnecessary delay
  i2c-nomadik: change the TX and RX threshold
  i2c-nomadik: add code to retry on timeout failure
  i2c-nomadik: use pm_runtime API
  i2c-nomadik: print abort cause only on abort tag
  i2c-nomadik: correct adapter timeout initialization
  i2c-nomadik: remove the redundant error message
  i2c-nomadik: corrrect returned error numbers
  i2c-nomadik: fix speed enumerator
  i2c-nomadik: make i2c timeout specific per i2c bus
  i2c-nomadik: add regulator support
  i2c: i2c-sh_mobile bus speed platform data V2
  i2c: i2c-sh_mobile clock string removal
  i2c-eg20t: Support new device ML7223 IOH
  i2c: tegra: Add de-bounce cycles.
  i2c: tegra: fix repeated start handling
  i2c: tegra: recover from spurious interrupt storm
  ...

Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', 'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c

mach-ux500: set proper I2C platform data from MOP500s

This specifies the new per-platform timeout per I2C bus and
switches the I2C buses to fast mode, and increase the FIFO
depth to 8 for reads and writes.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: break out single messsage transmission

Reduce code size in the message transfer function by factoring out
a single-message transfer function.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: reset the hw after status check

In case of I2C timeout, reset the HW only after the HW status
is read, otherwise the staus will be lost.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: remove the unnecessary delay

The delay in the driver seems to be not needed, so remove it.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Markus Grape <markus.grape@stericsson.com>
Tested-by: Per Persson <per.xb.persson@stericsson.com>
Tested-by: Chethan Krishna N <chethan.krishna@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: change the TX and RX threshold

1) Increase RX FIFO threshold so that there is a reduction in
the number of interrupts handled to complete a transaction.

2) Fill TX FIFO in the write function.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: add code to retry on timeout failure

It is seen that i2c-nomadik controller randomly stops generating the
interrupts leading to a i2c timeout. As a workaround to this problem,
add retries to the on going transfer on failure.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: use pm_runtime API

Use the pm_runtime API for pins control.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
[deleted some surplus runtime PM code]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: print abort cause only on abort tag

Modify the code to:
1)Print the cause of i2c failure only if the status is set to ABORT.
2)Print slave address on send/receive fail, will help in which slave
failed.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: correct adapter timeout initialization

Correct the incorrect initialization of adapter timeout not to be
in milliseconds, as it needs to be done in jiffies.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: remove the redundant error message

The abort cause string itself is an error, so remove the redundant
explicit error message.

Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: corrrect returned error numbers

The code was returning bad error numbers or just -1 in some cases.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: fix speed enumerator

The I2C speed enumerators in the i2c-nomadik header file were in
the wrong order.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: make i2c timeout specific per i2c bus

Add option to have different i2c timeout delay for different i2c buses
specified in platform data. Default to the old value unless specified.

Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-nomadik: add regulator support

This on-chip I2C controller needs to fetch the regulator
representing its voltage domain so that it won't be switched off.

Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-parport: Various cleanups
  i2c-i801: Don't depend on other kernel driver config options
  i2c-i801: Check for vendor Fujitsu before probing for apanel
  i2c-i801: Don't probe for slaves on IDF channels
  i2c-i801: SMBus patch for Intel Panther Point DeviceIDs
  i2c/writing-clients: Fix foo_driver.id_table

Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  jbd: Fix comment to match the code in journal_start()
  jbd/jbd2: remove obsolete summarise_journal_usage.
  jbd: Fix forever sleeping process in do_get_write_access()
  ext2: fix error msg when mounting fs with too-large blocksize
  jbd: fix fsync() tid wraparound bug
  ext3: Fix fs corruption when make_indexed_dir() fails
  ext3: Fix lock inversion in ext3_symlink()

Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: make plock operation killable
  dlm: remove shared message stub for recovery
  dlm: delayed reply message warning
  dlm: Remove superfluous call to recalc_sigpending()

Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (43 commits)
  TOMOYO: Fix wrong domainname validation.
  SELINUX: add /sys/fs/selinux mount point to put selinuxfs
  CRED: Fix load_flat_shared_library() to initialise bprm correctly
  SELinux: introduce path_has_perm
  flex_array: allow 0 length elements
  flex_arrays: allow zero length flex arrays
  flex_array: flex_array_prealloc takes a number of elements, not an end
  SELinux: pass last path component in may_create
  SELinux: put name based create rules in a hashtable
  SELinux: generic hashtab entry counter
  SELinux: calculate and print hashtab stats with a generic function
  SELinux: skip filename trans rules if ttype does not match parent dir
  SELinux: rename filename_compute_type argument to *type instead of *con
  SELinux: fix comment to state filename_compute_type takes an objname not a qstr
  SMACK: smack_file_lock can use the struct path
  LSM: separate LSM_AUDIT_DATA_DENTRY from LSM_AUDIT_DATA_PATH
  LSM: split LSM_AUDIT_DATA_FS into _PATH and _INODE
  SELINUX: Make selinux cache VFS RCU walks safe
  SECURITY: Move exec_permission RCU checks into security modules
  SELinux: security_read_policy should take a size_t not ssize_t
  ...

Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o
  scripts/kallsyms.c: fix potential segfault
  scripts/gen_initramfs_list.sh: Convert to a /bin/sh script
  kbuild: Fix GNU make v3.80 compatibility
  kbuild: Fix passing -Wno-* options to gcc 4.4+
  kbuild: move scripts/basic/docproc.c to scripts/docproc.c
  kbuild: Fix Makefile.asm-generic for um
  kbuild: Allow to combine multiple W= levels
  kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0
  Fix handling of backlash character in LINUX_COMPILE_BY name
  kbuild: asm-generic support
  kbuild: implement several W= levels
  kbuild: Fix build with binutils <= 2.19
  initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries
  kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros
  kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros
  kbuild: Use the deterministic mode of ar
  kbuild: Call gzip with -n
  kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile
  Kconfig: improve KALLSYMS_ALL documentation

Fix up trivial conflict in Makefile

Merge git://git./linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: Make struct pcmcia_device_id const, sound drivers edition
  staging: pcmcia: Convert pcmcia_device_id declarations to const
  pcmcia: Convert pcmcia_device_id declarations to const
  pcmcia: Make declaration and uses of struct pcmcia_device_id const
  pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data

Merge branch 'drm-core-next' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits)
  drivers/gpu/drm/radeon/atom.c: fix warning
  drm/radeon/kms: bump kms version number
  drm/radeon/kms: properly set num banks for fusion asics
  drm/radeon/kms/atom: move dig phy init out of modesetting
  drm/radeon/kms/cayman: fix typo in register mask
  drm/radeon/kms: fix typo in spread spectrum code
  drm/radeon/kms: fix tile_config value reported to userspace on cayman.
  drm/radeon/kms: fix incorrect comparison in cayman setup code.
  drm/radeon/kms: add wait idle ioctl for eg->cayman
  drm/radeon/cayman: setup hdp to invalidate and flush when asked
  drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked
  agp/uninorth: Fix lockups with radeon KMS and >1x.
  drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only
  drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices
  drm/radeon/kms: fixup eDP connector handling
  drm/radeon/kms: bail early for eDP in hotplug callback
  drm/radeon/kms: simplify hotplug handler logic
  drm/radeon/kms: rewrite DP handling
  drm/radeon/kms/atom: add support for setting DP panel mode
  drm/radeon/kms: atombios.h updates for DP panel mode
  ...

Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (29 commits)
  [S390] cpu hotplug: fix external interrupt subclass mask handling
  [S390] oprofile: dont access lowcore
  [S390] oprofile: add missing irq stats counter
  [S390] Ignore sendmmsg system call note wired up warning
  [S390] s390,oprofile: fix compile error for !CONFIG_SMP
  [S390] s390,oprofile: fix alert counter increment
  [S390] Remove unused includes in process.c
  [S390] get CPC image name
  [S390] sclp: event buffer dissection
  [S390] chsc: process channel-path-availability information
  [S390] refactor page table functions for better pgste support
  [S390] merge page_test_dirty and page_clear_dirty
  [S390] qdio: prevent compile warning
  [S390] sclp: remove unnecessary sendmask check
  [S390] convert old cpumask API into new one
  [S390] pfault: cleanup code
  [S390] pfault: cpu hotplug vs missing completion interrupts
  [S390] smp: add __noreturn attribute to cpu_die()
  [S390] percpu: implement arch specific irqsafe_cpu_ops
  [S390] vdso: disable gcov profiling
  ...

i2c-parport: Various cleanups

* Fix white space.
* Rename labels to something meaningful.
* Prefix defines with PORT_ to avoid collision with macros from
  <linux/parport.h>.
* Add const markers where possible.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander
  Input: tsc2007 - add X, Y and Z fuzz factors to platform data
  Input: tsc2007 - add poll_period parameter to platform data
  Input: tsc2007 - add poll_delay parameter to platform data
  Input: tsc2007 - add max_rt parameter to platform data
  Input: tsc2007 - debounce pressure measurement
  Input: ad714x - fix captouch wheel option algorithm
  Input: ad714x - allow platform code to specify irqflags
  Input: ad714x - fix threshold and completion interrupt masks
  Input: ad714x - fix up input configuration
  Input: elantech - remove support for proprietary X driver
  Input: elantech - report multitouch with proper ABS_MT messages
  Input: elantech - export pressure and width when supported
  Input: elantech - describe further the protocol
  Input: atmel_tsadcc - correct call to input_free_device
  Input: add driver FSL MPR121 capacitive touch sensor
  Input: remove useless synchronize_rcu() calls
  Input: ads7846 - fix gpio_pendown configuration
  Input: ads7846 - add possibility to use external vref on ads7846
  Input: rotary-encoder - add support for half-period encoders
  ...

i2c-i801: Don't depend on other kernel driver config options

Don't let other driver config options influence us, as it makes the
code more complex and fragile for a small benefit. There's nothing
wrong with instantiating I2C devices even if they don't have a driver.
And we're talking about 835 extra bytes in the binary on x86-64,
that's hardly worth arguing about.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Woodhouse <david.woodhouse@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>