s390/kasan: fix large PMD pages address alignment check

[ Upstream commit ddd63c85ef67ea9ea7282ad35eafb6568047126e ]

It is currently possible to initialize a large PMD page when
the address is not aligned on page boundary.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf_get_extendedattr() had no boundary checks.

[ Upstream commit 58bc6d1be2f3b0ceecb6027dfa17513ec6aa2abb ]

When parsing the ExtendedAttr data, malicous or corrupt attribute length
could cause kernel hangs and buffer overruns in some special cases.

Link: https://lore.kernel.org/r/20210822093332.25234-1-stian.skjelstad@gmail.com
Signed-off-by: Stian Skjelstad <stian.skjelstad@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fcntl: fix potential deadlock for &fasync_struct.fa_lock

[ Upstream commit 2f488f698fda820f8e6fa0407630154eceb145d6 ]

There is an existing lock hierarchy of
&dev->event_lock --> &fasync_struct.fa_lock --> &f->f_owner.lock
from the following call chain:

  input_inject_event():
    spin_lock_irqsave(&dev->event_lock,...);
    input_handle_event():
      input_pass_values():
        input_to_handler():
          evdev_events():
            evdev_pass_values():
              spin_lock(&client->buffer_lock);
              __pass_event():
                kill_fasync():
                  kill_fasync_rcu():
                    read_lock(&fa->fa_lock);
                    send_sigio():
                      read_lock_irqsave(&fown->lock,...);

&dev->event_lock is HARDIRQ-safe, so interrupts have to be disabled
while grabbing &fasync_struct.fa_lock, otherwise we invert the lock
hierarchy. However, since kill_fasync which calls kill_fasync_rcu is
an exported symbol, it may not necessarily be called with interrupts
disabled.

As kill_fasync_rcu may be called with interrupts disabled (for
example, in the call chain above), we replace calls to
read_lock/read_unlock on &fasync_struct.fa_lock in kill_fasync_rcu
with read_lock_irqsave/read_unlock_irqrestore.

Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - do not export adf_iov_putmsg()

[ Upstream commit 645ae0af1840199086c33e4f841892ebee73f615 ]

The function adf_iov_putmsg() is only used inside the intel_qat module
therefore should not be exported.
Remove EXPORT_SYMBOL for the function adf_iov_putmsg().

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix naming for init/shutdown VF to PF notifications

[ Upstream commit b90c1c4d3fa8cd90f4e8245b13564380fd0bfad1 ]

At start and shutdown, VFs notify the PF about their state. These
notifications are carried out through a message exchange using the PFVF
protocol.

Function names lead to believe they do perform init or shutdown logic.
This is to fix the naming to better reflect their purpose.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix reuse of completion variable

[ Upstream commit 3d655732b0199562267a05c7ff69ecdd11632939 ]

Use reinit_completion() to set to a clean state a completion variable,
used to coordinate the VF to PF request-response flow, before every
new VF request.

Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - handle both source of interrupt in VF ISR

[ Upstream commit 0a73c762e1eee33a5e5dc0e3488f1b7cd17249b3 ]

The top half of the VF drivers handled only a source at the time.
If an interrupt for PF2VF and bundle occurred at the same time, the ISR
scheduled only the bottom half for PF2VF.
This patch fixes the VF top half so that if both sources of interrupt
trigger at the same time, both bottom halves are scheduled.

This patch is based on earlier work done by Conor McLoughlin.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - do not ignore errors from enable_vf2pf_comms()

[ Upstream commit 5147f0906d50a9d26f2b8698cd06b5680e9867ff ]

The function adf_dev_init() ignores the error code reported by
enable_vf2pf_comms(). If the latter fails, e.g. the VF is not compatible
with the pf, then the load of the VF driver progresses.
This patch changes adf_dev_init() so that the error code from
enable_vf2pf_comms() is returned to the caller.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: omap - Fix inconsistent locking of device lists

[ Upstream commit fe4d55773b879c785ae61da9b1c2160f0110f67e ]

lockdep complains that in omap-aes, the list_lock is taken both with
softirqs enabled at probe time, and also in softirq context, which
could lead to a deadlock:

    ================================
    WARNING: inconsistent lock state
    5.14.0-rc1-00035-gc836005b01c5-dirty #69 Not tainted
    --------------------------------
    inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
    ksoftirqd/0/7 [HC0[0]:SC1[3]:HE1:SE0] takes:
    bf00e014 (list_lock){+.?.}-{2:2}, at: omap_aes_find_dev+0x18/0x54 [omap_aes_driver]
    {SOFTIRQ-ON-W} state was registered at:
      _raw_spin_lock+0x40/0x50
      omap_aes_probe+0x1d4/0x664 [omap_aes_driver]
      platform_probe+0x58/0xb8
      really_probe+0xbc/0x314
      __driver_probe_device+0x80/0xe4
      driver_probe_device+0x30/0xc8
      __driver_attach+0x70/0xf4
      bus_for_each_dev+0x70/0xb4
      bus_add_driver+0xf0/0x1d4
      driver_register+0x74/0x108
      do_one_initcall+0x84/0x2e4
      do_init_module+0x5c/0x240
      load_module+0x221c/0x2584
      sys_finit_module+0xb0/0xec
      ret_fast_syscall+0x0/0x2c
      0xbed90b30
    irq event stamp: 111800
    hardirqs last  enabled at (111800): [<c02a21e4>] __kmalloc+0x484/0x5ec
    hardirqs last disabled at (111799): [<c02a21f0>] __kmalloc+0x490/0x5ec
    softirqs last  enabled at (111776): [<c01015f0>] __do_softirq+0x2b8/0x4d0
    softirqs last disabled at (111781): [<c0135948>] run_ksoftirqd+0x34/0x50

    other info that might help us debug this:
     Possible unsafe locking scenario:

           CPU0
           ----
      lock(list_lock);
      <Interrupt>
        lock(list_lock);

     *** DEADLOCK ***

    2 locks held by ksoftirqd/0/7:
     #0: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb+0x6c/0x260
     #1: c0f5e8c8 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x2c/0xdc

    stack backtrace:
    CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 5.14.0-rc1-00035-gc836005b01c5-dirty #69
    Hardware name: Generic AM43 (Flattened Device Tree)
    [<c010e6e0>] (unwind_backtrace) from [<c010b9d0>] (show_stack+0x10/0x14)
    [<c010b9d0>] (show_stack) from [<c017c640>] (mark_lock.part.17+0x5bc/0xd04)
    [<c017c640>] (mark_lock.part.17) from [<c017d9e4>] (__lock_acquire+0x960/0x2fa4)
    [<c017d9e4>] (__lock_acquire) from [<c0180980>] (lock_acquire+0x10c/0x358)
    [<c0180980>] (lock_acquire) from [<c093d324>] (_raw_spin_lock_bh+0x44/0x58)
    [<c093d324>] (_raw_spin_lock_bh) from [<bf00b258>] (omap_aes_find_dev+0x18/0x54 [omap_aes_driver])
    [<bf00b258>] (omap_aes_find_dev [omap_aes_driver]) from [<bf00b328>] (omap_aes_crypt+0x94/0xd4 [omap_aes_driver])
    [<bf00b328>] (omap_aes_crypt [omap_aes_driver]) from [<c08ac6d0>] (esp_input+0x1b0/0x2c8)
    [<c08ac6d0>] (esp_input) from [<c08c9e90>] (xfrm_input+0x410/0x1290)
    [<c08c9e90>] (xfrm_input) from [<c08b6374>] (xfrm4_esp_rcv+0x54/0x11c)
    [<c08b6374>] (xfrm4_esp_rcv) from [<c0838840>] (ip_protocol_deliver_rcu+0x48/0x3bc)
    [<c0838840>] (ip_protocol_deliver_rcu) from [<c0838c50>] (ip_local_deliver_finish+0x9c/0xdc)
    [<c0838c50>] (ip_local_deliver_finish) from [<c0838dd8>] (ip_local_deliver+0x148/0x1b0)
    [<c0838dd8>] (ip_local_deliver) from [<c0838f5c>] (ip_rcv+0x11c/0x180)
    [<c0838f5c>] (ip_rcv) from [<c077e3a4>] (__netif_receive_skb_one_core+0x54/0x74)
    [<c077e3a4>] (__netif_receive_skb_one_core) from [<c077e588>] (netif_receive_skb+0xa8/0x260)
    [<c077e588>] (netif_receive_skb) from [<c068d6d4>] (cpsw_rx_handler+0x224/0x2fc)
    [<c068d6d4>] (cpsw_rx_handler) from [<c0688ccc>] (__cpdma_chan_process+0xf4/0x188)
    [<c0688ccc>] (__cpdma_chan_process) from [<c068a0c0>] (cpdma_chan_process+0x3c/0x5c)
    [<c068a0c0>] (cpdma_chan_process) from [<c0690e14>] (cpsw_rx_mq_poll+0x44/0x98)
    [<c0690e14>] (cpsw_rx_mq_poll) from [<c0780810>] (__napi_poll+0x28/0x268)
    [<c0780810>] (__napi_poll) from [<c0780c64>] (net_rx_action+0xcc/0x204)
    [<c0780c64>] (net_rx_action) from [<c0101478>] (__do_softirq+0x140/0x4d0)
    [<c0101478>] (__do_softirq) from [<c0135948>] (run_ksoftirqd+0x34/0x50)
    [<c0135948>] (run_ksoftirqd) from [<c01583b8>] (smpboot_thread_fn+0xf4/0x1d8)
    [<c01583b8>] (smpboot_thread_fn) from [<c01546dc>] (kthread+0x14c/0x174)
    [<c01546dc>] (kthread) from [<c010013c>] (ret_from_fork+0x14/0x38)
    ...

The omap-des and omap-sham drivers appear to have a similar issue.

Fix this by using spin_{,un}lock_bh() around device list access in all
the probe and remove functions.

Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libata: fix ata_host_start()

[ Upstream commit 355a8031dc174450ccad2a61c513ad7222d87a97 ]

The loop on entry of ata_host_start() may not initialize host->ops to a
non NULL value. The test on the host_stop field of host->ops must then
be preceded by a check that host->ops is not NULL.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210816014456.2191776-3-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/zcrypt: fix wrong offset index for APKA master key valid state

[ Upstream commit 8617bb74006252cb2286008afe7d6575a6425857 ]

Tests showed a mismatch between what the CCA tool reports about
the APKA master key state and what's displayed by the zcrypt dd
in sysfs. After some investigation, we found out that the
documentation which was the source for the zcrypt dd implementation
lacks the listing of 3 fields. So this patch now moves the
evaluation of the APKA master key state to the correct offset.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cio: add dev_busid sysfs entry for each subchannel

[ Upstream commit d3683c055212bf910d4e318f7944910ce10dbee6 ]

Introduce dev_busid, which exports the device-id associated with the
io-subchannel (and message-subchannel). The dev_busid indicates that of
the device which may be physically installed on the corrosponding
subchannel. The dev_busid value "none" indicates that the subchannel
is not valid, there is no I/O device currently associated with the
subchannel.

The dev_busid information would be helpful to write device-specific
udev-rules associated with the subchannel. The dev_busid interface would
be available even when the sch is not bound to any driver or if there is
no operational device connected on it. Hence this attribute can be used to
write udev-rules which are specific to the device associated with the
subchannel.

Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: max17042_battery: fix typo in MAx17042_TOFF

[ Upstream commit ed0d0a0506025f06061325cedae1bbebd081620a ]

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: smb347-charger: Add missing pin control activation

[ Upstream commit efe2175478d5237949e33c84d9a722fc084b218c ]

Pin control needs to be activated by setting the enable bit, otherwise
hardware rejects all pin changes. Previously this stayed unnoticed on
Nexus 7 because pin control was enabled by default after rebooting from
downstream kernel, which uses driver that enables the bit and charger
registers are non-volatile until power supply (battery) is disconnected.
Configure the pin control enable bit. This fixes the potentially
never-enabled charging on devices that use pin control.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: pass back cntlid on successful completion

[ Upstream commit e804d5abe2d74cfe23f5f83be580d1cdc9307111 ]

According to the NVMe specification, the response dword 0 value of the
Connect command is based on status code: return cntlid for successful
compeltion return IPO and IATTR for connect invalid parameters.  Fix
a missing error information for a zero sized queue, and return the
cntlid also for I/O queue Connect commands.

Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-rdma: don't update queue count when failing to set io queues

[ Upstream commit 85032874f80ba17bf187de1d14d9603bf3f582b8 ]

We update ctrl->queue_count and schedule another reconnect when io queue
count is zero.But we will never try to create any io queue in next reco-
nnection, because ctrl->queue_count already set to zero.We will end up
having an admin-only session in Live state, which is exactly what we try
to avoid in the original patch.
Update ctrl->queue_count after queue_count zero checking to fix it.

Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-tcp: don't update queue count when failing to set io queues

[ Upstream commit 664227fde63844d69e9ec9e90a8a7801e6ff072d ]

We update ctrl->queue_count and schedule another reconnect when io queue
count is zero.But we will never try to create any io queue in next reco-
nnection, because ctrl->queue_count already set to zero.We will end up
having an admin-only session in Live state, which is exactly what we try
to avoid in the original patch.
Update ctrl->queue_count after queue_count zero checking to fix it.

Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-throtl: optimize IOPS throttle for large IO scenarios

[ Upstream commit 4f1e9630afe6332de7286820fedd019f19eac057 ]

After patch 54efd50 (block: make generic_make_request handle
arbitrarily sized bios), the IO through io-throttle may be larger,
and these IOs may be further split into more small IOs. However,
IOPS throttle does not seem to be aware of this change, which
makes the calculation of IOPS of large IOs incomplete, resulting
in disk-side IOPS that does not meet expectations. Maybe we should
fix this problem.

We can reproduce it by set max_sectors_kb of disk to 128, set
blkio.write_iops_throttle to 100, run a dd instance inside blkio
and use iostat to watch IOPS:

dd if=/dev/zero of=/dev/sdb bs=1M count=1000 oflag=direct

As a result, without this change the average IOPS is 1995, with
this change the IOPS is 98.

Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/65869aaad05475797d63b4c3fed4f529febe3c26.1627876014.git.brookxu@tencent.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: add proper error unwinding in bcache_device_init

[ Upstream commit 224b0683228c5f332f9cee615d85e75e9a347170 ]

Except for the IDA none of the allocations in bcache_device_init is
unwound on error, fix that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

isofs: joliet: Fix iocharset=utf8 mount option

[ Upstream commit 28ce50f8d96ec9035f60c9348294ea26b94db944 ]

Currently iocharset=utf8 mount option is broken. To use UTF-8 as iocharset,
it is required to use utf8 mount option.

Fix iocharset=utf8 mount option to use be equivalent to the utf8 mount
option.

If UTF-8 as iocharset is used then s_nls_iocharset is set to NULL. So
simplify code around, remove s_utf8 field as to distinguish between UTF-8
and non-UTF-8 it is needed just to check if s_nls_iocharset is set to NULL
or not.

Link: https://lore.kernel.org/r/20210808162453.1653-5-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix iocharset=utf8 mount option

[ Upstream commit b645333443712d2613e4e863f81090d5dc509657 ]

Currently iocharset=utf8 mount option is broken. To use UTF-8 as iocharset,
it is required to use utf8 mount option.

Fix iocharset=utf8 mount option to use be equivalent to the utf8 mount
option.

If UTF-8 as iocharset is used then s_nls_map is set to NULL. So simplify
code around, remove UDF_FLAG_NLS_MAP and UDF_FLAG_UTF8 flags as to
distinguish between UTF-8 and non-UTF-8 it is needed just to check if
s_nls_map set to NULL or not.

Link: https://lore.kernel.org/r/20210808162453.1653-4-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Check LVID earlier

[ Upstream commit 781d2a9a2fc7d0be53a072794dc03ef6de770f3d ]

We were checking validity of LVID entries only when getting
implementation use information from LVID in udf_sb_lvidiu(). However if
the LVID is suitably corrupted, it can cause problems also to code such
as udf_count_free() which doesn't use udf_sb_lvidiu(). So check validity
of LVID already when loading it from the disk and just disable LVID
altogether when it is not valid.

Reported-by: syzbot+7fbfe5fed73ebb675748@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hrtimer: Ensure timerfd notification for HIGHRES=n

[ Upstream commit 8c3b5e6ec0fee18bc2ce38d1dfe913413205f908 ]

If high resolution timers are disabled the timerfd notification about a
clock was set event is not happening for all cases which use
clock_was_set_delayed() because that's a NOP for HIGHRES=n, which is wrong.

Make clock_was_set_delayed() unconditially available to fix that.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135158.196661266@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns()

[ Upstream commit 627ef5ae2df8eeccb20d5af0e4cfa4df9e61ed28 ]

If __hrtimer_start_range_ns() is invoked with an already armed hrtimer then
the timer has to be canceled first and then added back. If the timer is the
first expiring timer then on removal the clockevent device is reprogrammed
to the next expiring timer to avoid that the pending expiry fires needlessly.

If the new expiry time ends up to be the first expiry again then the clock
event device has to reprogrammed again.

Avoid this by checking whether the timer is the first to expire and in that
case, keep the timer on the current CPU and delay the reprogramming up to
the point where the timer has been enqueued again.

Reported-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135157.873137732@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

posix-cpu-timers: Force next expiration recalc after itimer reset

[ Upstream commit 406dd42bd1ba0c01babf9cde169bb319e52f6147 ]

When an itimer deactivates a previously armed expiration, it simply doesn't
do anything. As a result the process wide cputime counter keeps running and
the tick dependency stays set until it reaches the old ghost expiration
value.

This can be reproduced with the following snippet:

void trigger_process_counter(void)
{
struct itimerval n = {};

n.it_value.tv_sec = 100;
setitimer(ITIMER_VIRTUAL, &n, NULL);
n.it_value.tv_sec = 0;
setitimer(ITIMER_VIRTUAL, &n, NULL);
}

Fix this with resetting the relevant base expiration. This is similar to
disarming a timer.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210726125513.271824-4-frederic@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/mce_amd: Do not load edac_mce_amd module on guests

[ Upstream commit 767f4b620edadac579c9b8b6660761d4285fa6f9 ]

Hypervisors likely do not expose the SMCA feature to the guest and
loading this module leads to false warnings. This module should not be
loaded in guests to begin with, but people tend to do so, especially
when testing kernels in VMs. And then they complain about those false
warnings.

Do the practical thing and do not load this module when running as a
guest to avoid all that complaining.

 [ bp: Rewrite commit message. ]

Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lkml.kernel.org/r/20210628172740.245689-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu/tree: Handle VM stoppage in stall detection

[ Upstream commit ccfc9dd6914feaa9a81f10f9cce56eb0f7712264 ]

The soft watchdog timer function checks if a virtual machine
was suspended and hence what looks like a lockup in fact
is a false positive.

This is what kvm_check_and_clear_guest_paused() does: it
tests guest PVCLOCK_GUEST_STOPPED (which is set by the host)
and if it's set then we need to touch all watchdogs and bail
out.

Watchdog timer function runs from IRQ, so PVCLOCK_GUEST_STOPPED
check works fine.

There is, however, one more watchdog that runs from IRQ, so
watchdog timer fn races with it, and that watchdog is not aware
of PVCLOCK_GUEST_STOPPED - RCU stall detector.

apic_timer_interrupt()
 smp_apic_timer_interrupt()
  hrtimer_interrupt()
   __hrtimer_run_queues()
    tick_sched_timer()
     tick_sched_handle()
      update_process_times()
       rcu_sched_clock_irq()

This triggers RCU stalls on our devices during VM resume.

If tick_sched_handle()->rcu_sched_clock_irq() runs on a VCPU
before watchdog_timer_fn()->kvm_check_and_clear_guest_paused()
then there is nothing on this VCPU that touches watchdogs and
RCU reads stale gp stall timestamp and new jiffies value, which
makes it think that RCU has stalled.

Make RCU stall watchdog aware of PVCLOCK_GUEST_STOPPED and
don't report RCU stalls when we resume the VM.

Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/deadline: Fix missing clock update in migrate_task_rq_dl()

[ Upstream commit b4da13aa28d4fd0071247b7b41c579ee8a86c81a ]

A missing clock update is causing the following warning:

rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 112 PID: 2041 at kernel/sched/sched.h:1453
sub_running_bw.isra.0+0x190/0x1a0
...
CPU: 112 PID: 2041 Comm: sugov:112 Tainted: G W 5.14.0-rc1 #1
Hardware name: WIWYNN Mt.Jade Server System
B81.030Z1.0007/Mt.Jade Motherboard, BIOS 1.6.20210526 (SCP:
1.06.20210526) 2021/05/26
...
Call trace:
  sub_running_bw.isra.0+0x190/0x1a0
  migrate_task_rq_dl+0xf8/0x1e0
  set_task_cpu+0xa8/0x1f0
  try_to_wake_up+0x150/0x3d4
  wake_up_q+0x64/0xc0
  __up_write+0xd0/0x1c0
  up_write+0x4c/0x2b0
  cppc_set_perf+0x120/0x2d0
  cppc_cpufreq_set_target+0xe0/0x1a4 [cppc_cpufreq]
  __cpufreq_driver_target+0x74/0x140
  sugov_work+0x64/0x80
  kthread_worker_fn+0xe0/0x230
  kthread+0x138/0x140
  ret_from_fork+0x10/0x18

The task causing this is the `cppc_fie` DL task introduced by
commit 1eb5dde674f5 ("cpufreq: CPPC: Add support for frequency
invariance").

With CONFIG_ACPI_CPPC_CPUFREQ_FIE=y and schedutil cpufreq governor on
slow-switching system (like on this Ampere Altra WIWYNN Mt. Jade Arm
Server):

DL task `curr=sugov:112` lets `p=cppc_fie` migrate and since the latter
is in `non_contending` state, migrate_task_rq_dl() calls

  sub_running_bw()->__sub_running_bw()->cpufreq_update_util()->
  rq_clock()->assert_clock_updated()

on p.

Fix this by updating the clock for a non_contending task in
migrate_task_rq_dl() before calling sub_running_bw().

Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20210804135925.3734605-1-dietmar.eggemann@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()

[ Upstream commit fe28140b3393b0ba1eb95cc109f974a7e58b26fd ]

We should not clear FLAGS_DMA_ACTIVE before omap_sham_update_dma_stop() is
done calling dma_unmap_sg(). We already clear FLAGS_DMA_ACTIVE at the
end of omap_sham_update_dma_stop().

The early clearing of FLAGS_DMA_ACTIVE is not causing issues as we do not
need to defer anything based on FLAGS_DMA_ACTIVE currently. So this can be
applied as clean-up.

Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors

[ Upstream commit caa534c3ba40c6e8352b42cbbbca9ba481814ac8 ]

When fuel_gauge_reg_readb()/_writeb() fails, report which register we
were trying to read / write when the error happened.

Also reword the message a bit:
- Drop the axp288 prefix, dev_err() already prints this
- Switch from telegram / abbreviated style to a normal sentence, aligning
  the message with those from fuel_gauge_read_*bit_word()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/deadline: Fix reset_on_fork reporting of DL tasks

[ Upstream commit f95091536f78971b269ec321b057b8d630b0ad8a ]

It is possible for sched_getattr() to incorrectly report the state of
the reset_on_fork flag when called on a deadline task.

Indeed, if the flag was set on a deadline task using sched_setattr()
with flags (SCHED_FLAG_RESET_ON_FORK | SCHED_FLAG_KEEP_PARAMS), then
p->sched_reset_on_fork will be set, but __setscheduler() will bail out
early, which means that the dl_se->flags will not get updated by
__setscheduler_params()->__setparam_dl(). Consequently, if
sched_getattr() is then called on the task, __getparam_dl() will
override kattr.sched_flags with the now out-of-date copy in dl_se->flags
and report the stale value to userspace.

To fix this, make sure to only copy the flags that are relevant to
sched_deadline to and from the dl_se->flags field.

Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210727101103.2729607-2-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: mxs-dcp - Check for DMA mapping errors

[ Upstream commit df6313d707e575a679ada3313358289af24454c0 ]

After calling dma_map_single(), we must also call dma_mapping_error().
This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG:

[  311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c
[  311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single]

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: tps65910: Silence deferred probe error

[ Upstream commit e301df76472cc929fa62d923bc3892931f7ad71d ]

The TPS65910 regulator now gets a deferred probe until supply regulator is
registered. Silence noisy error message about the deferred probe.

Reported-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210705201211.16082-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: fix the offset of register error log

[ Upstream commit 1852f5ed358147095297a09cc3c6f160208a676d ]

This patch fixes the offset of register error log
by using regmap_get_offset().

Signed-off-by: Jeongtae Park <jeongtae.park@gmail.com>
Link: https://lore.kernel.org/r/20210701142630.44936-1-jeongtae.park@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/mutex: Fix HANDOFF condition

[ Upstream commit 048661a1f963e9517630f080687d48af79ed784c ]

Yanfei reported that setting HANDOFF should not depend on recomputing
@first, only on @first state. Which would then give:

  if (ww_ctx || !first)
    first = __mutex_waiter_is_first(lock, &waiter);
  if (first)
    __mutex_set_flag(lock, MUTEX_FLAG_HANDOFF);

But because 'ww_ctx || !first' is basically 'always' and the test for
first is relatively cheap, omit that first branch entirely.

Reported-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Link: https://lore.kernel.org/r/20210630154114.896786297@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.64

Link: https://lore.kernel.org/r/20210910122916.253646001@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Call Max Payload Size-related fixup quirks early

commit b8da302e2955fe4d41eb9d48199242674d77dbe0 upstream.

pci_device_add() calls HEADER fixups after pci_configure_device(), which
configures Max Payload Size.

Convert MPS-related fixups to EARLY fixups so pci_configure_mps() takes
them into account.

Fixes: 27d868b5e6cfa ("PCI: Set MPS to match upstream bridge")
Link: https://lore.kernel.org/r/20210624171418.27194-1-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions

commit a729691b541f6e63043beae72e635635abe5dc09 upstream.

When this platform was relatively new in November 2011, with early BIOS
revisions, a reboot quirk was added in commit 6be30bb7d750 ("x86/reboot:
Blacklist Dell OptiPlex 990 known to require PCI reboot")

However, this quirk (and several others) are open-ended to all BIOS
versions and left no automatic expiry if/when the system BIOS fixed the
issue, meaning that nobody is likely to come along and re-test.

What is really problematic with using PCI reboot as this quirk does, is
that it causes this platform to do a full power down, wait one second,
and then power back on.  This is less than ideal if one is using it for
boot testing and/or bisecting kernels when legacy rotating hard disks
are installed.

It was only by chance that the quirk was noticed in dmesg - and when
disabled it turned out that it wasn't required anymore (BIOS A24), and a
default reboot would work fine without the "harshness" of power cycling the
machine (and disks) down and up like the PCI reboot does.

Doing a bit more research, it seems that the "newest" BIOS for which the
issue was reported[1] was version A06, however Dell[2] seemed to suggest
only up to and including version A05, with the A06 having a large number of
fixes[3] listed.

As is typical with a new platform, the initial BIOS updates come frequently
and then taper off (and in this case, with a revival for CPU CVEs); a
search for O990-A<ver>.exe reveals the following dates:

        A02     16 Mar 2011
        A03     11 May 2011
        A06     14 Sep 2011
        A07     24 Oct 2011
        A10     08 Dec 2011
        A14     06 Sep 2012
        A16     15 Oct 2012
        A18     30 Sep 2013
        A19     23 Sep 2015
        A20     02 Jun 2017
        A23     07 Mar 2018
        A24     21 Aug 2018

While it's overkill to flash and test each of the above, it would seem
likely that the issue was contained within A0x BIOS versions, given the
dates above and the dates of issue reports[4] from distros.  So rather than
just throw out the quirk entirely, limit the scope to just those early BIOS
versions, in case people are still running systems from 2011 with the
original as-shipped early A0x BIOS versions.

[1] https://lore.kernel.org/lkml/1320373471-3942-1-git-send-email-trenn@suse.de/
[2] https://www.dell.com/support/kbdoc/en-ca/000131908/linux-based-operating-systems-stall-upon-reboot-on-optiplex-390-790-990-systems
[3] https://www.dell.com/support/home/en-ca/drivers/driversdetails?driverid=85j10
[4] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/768039

Fixes: 6be30bb7d750 ("x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210530162447.996461-4-paul.gortmaker@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: fix unsafe memory usage in xhci tracing

commit cbf286e8ef8337308c259ff5b9ce2e74d403be5a upstream.

Removes static char buffer usage in the following decode functions:
xhci_decode_trb()
xhci_decode_ptortsc()

Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.

Minor chanes are needed in xhci debugfs code as these functions are also
used there. Changes include moving XHCI_MSG_MAX definititon from
xhci-trace.h to xhci.h

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: fix even more unsafe memory usage in xhci tracing

commit 4843b4b5ec64b875a5e334f280508f1f75e7d3e4 upstream.

Removes static char buffer usage in the following decode functions:
xhci_decode_ctrl_ctx()
xhci_decode_slot_context()
xhci_decode_usbsts()
xhci_decode_doorbell()
xhci_decode_ep_context()

Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.

Minor changes are needed in other xhci code as these functions are also
used elsewhere

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: mtu3: fix the wrong HS mult value

commit 44e4439d8f9f8d0e9da767d1f31e7c211081feca upstream.

usb_endpoint_maxp() returns actual max packet size, @mult will
always be zero, fix it by using usb_endpoint_maxp_mult() instead
to get mult.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-3-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: mtu3: use @mult for HS isoc or intr

commit fd7cb394ec7efccc3985feb0978cee4d352e1817 upstream.

For HS isoc or intr, should use @mult but not @burst
to save mult value.

Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: mtu3: restore HS function when set SS/SSP

commit e88f28514065a6c48aadc367efb0ef6378a01543 upstream.

Due to HS function is disabled when set as FS, need restore
it when set as SS/SSP.

Fixes: dc4c1aa7eae9 ("usb: mtu3: add ->udc_set_speed()")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: tegra-xudc: fix the wrong mult value for HS isoc or intr

commit eeb0cfb6b2b6b731902e68af641e30bd31be3c7b upstream.

usb_endpoint_maxp() only returns the bit[10:0] of wMaxPacketSize
of endpoint descriptor, not includes bit[12:11] anymore, so use
usb_endpoint_maxp_mult() instead.
Meanwhile no need AND 0x7ff when get maxp, remove it.

Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable@vger.kernel.org
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-5-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-rcar: Don't reload firmware after the completion

commit 57f3ffdc11143f56f1314972fe86fe17a0dcde85 upstream.

According to the datasheet, "Upon the completion of FW Download,
there is no need to write or reload FW.". Otherwise, it's possible
to cause unexpected behaviors. So, adds such a condition.

Fixes: 4ac8918f3a73 ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers")
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210827063227.81990-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add registration quirk for JBL Quantum 800

commit c8b177b6e3a005bd8fb0395a4bc5db3470301c28 upstream.

Add another device ID for JBL Quantum 800. It requires the same quirk as
other JBL Quantum devices.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210831002531.116957-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: clearing flush request reference in tags->rqs[]

commit 364b61818f65045479e42e76ed8dd6f051778280 upstream.

Before we free request queue, clearing flush request reference in
tags->rqs[], so that potential UAF can be avoided.

Based on one patch written by David Jeffery.

Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210511152236.763464-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nftables: clone set element expression template

commit 4d8f9065830e526c83199186c5f56a6514f457d2 upstream.

memcpy() breaks when using connlimit in set elements. Use
nft_expr_clone() to initialize the connlimit expression list, otherwise
connlimit garbage collector crashes when walking on the list head copy.

[  493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables]
[  493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount]
[  493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83
[  493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297
[  493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000
[  493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0
[  493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c
[  493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001
[  493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000
[  493.064721] FS:  0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000
[  493.064725] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0
[  493.064733] Call Trace:
[  493.064737]  nf_conncount_gc_list+0x8f/0x150 [nf_conncount]
[  493.064746]  nft_rhash_gc+0x106/0x390 [nf_tables]

Reported-by: Laura Garcia Liebana <nevola@gmail.com>
Fixes: 409444522976 ("netfilter: nf_tables: add elements with stateful expressions")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: initialize set before expression setup

commit ad9f151e560b016b6ad3280b48e42fa11e1a5440 upstream.

nft_set_elem_expr_alloc() needs an initialized set if expression sets on
the NFT_EXPR_GC flag. Move set fields initialization before expression
setup.

[4512935.019450] ==================================================================
[4512935.019456] BUG: KASAN: null-ptr-deref in nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables]
[4512935.019487] Read of size 8 at addr 0000000000000070 by task nft/23532
[4512935.019494] CPU: 1 PID: 23532 Comm: nft Not tainted 5.12.0-rc4+ #48
[...]
[4512935.019502] Call Trace:
[4512935.019505]  dump_stack+0x89/0xb4
[4512935.019512]  ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables]
[4512935.019536]  ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables]
[4512935.019560]  kasan_report.cold.12+0x5f/0xd8
[4512935.019566]  ? nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables]
[4512935.019590]  nft_set_elem_expr_alloc+0x84/0xd0 [nf_tables]
[4512935.019615]  nf_tables_newset+0xc7f/0x1460 [nf_tables]

Reported-by: syzbot+ce96ca2b1d0b37c6422d@syzkaller.appspotmail.com
Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nftables: avoid potential overflows on 32bit arches

commit 6c8774a94e6ad26f29ef103c8671f55c255c6201 upstream.

User space could ask for very large hash tables, we need to make sure
our size computations wont overflow.

nf_tables_newset() needs to double check the u64 size
will fit into size_t field.

Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: fix is_flush_rq

commit a9ed27a764156929efe714033edb3e9023c5f321 upstream.

is_flush_rq() is called from bt_iter()/bt_tags_iter(), and runs the
following check:

hctx->fq->flush_rq == req

but the passed hctx from bt_iter()/bt_tags_iter() may be NULL because:

1) memory re-order in blk_mq_rq_ctx_init():

rq->mq_hctx = data->hctx;
...
refcount_set(&rq->ref, 1);

OR

2) tag re-use and ->rqs[] isn't updated with new request.

Fix the issue by re-writing is_flush_rq() as:

return rq->end_io == flush_end_io;

which turns out simpler to follow and immune to data race since we have
ordered WRITE rq->end_io and refcount_set(&rq->ref, 1).

Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter")
Cc: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de>
Cc: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210818010925.607383-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: fix kernel panic during iterating over flush request

commit c2da19ed50554ce52ecbad3655c98371fe58599f upstream.

For fixing use-after-free during iterating over requests, we grabbed
request's refcount before calling ->fn in commit 2e315dc07df0 ("blk-mq:
grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter").
Turns out this way may cause kernel panic when iterating over one flush
request:

1) old flush request's tag is just released, and this tag is reused by
one new request, but ->rqs[] isn't updated yet

2) the flush request can be re-used for submitting one new flush command,
so blk_rq_init() is called at the same time

3) meantime blk_mq_queue_tag_busy_iter() is called, and old flush request
is retrieved from ->rqs[tag]; when blk_mq_put_rq_ref() is called,
flush_rq->end_io may not be updated yet, so NULL pointer dereference
is triggered in blk_mq_put_rq_ref().

Fix the issue by calling refcount_set(&flush_rq->ref, 1) after
flush_rq->end_io is set. So far the only other caller of blk_rq_init() is
scsi_ioctl_reset() in which the request doesn't enter block IO stack and
the request reference count isn't used, so the change is safe.

Fixes: 2e315dc07df0 ("blk-mq: grab rq->refcount before calling ->fn in blk_mq_tagset_busy_iter")
Reported-by: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de>
Tested-by: "Blank-Burian, Markus, Dr." <blankburian@uni-muenster.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20210811142624.618598-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating

commit e10de314287c2c14b0e6f0e3e961975ce2f4a83d upstream.

On certain AMD platforms, when the IOMMU performance counter source
(csource) field is zero, power-gating for the counter is enabled, which
prevents write access and returns zero for read access.

This can cause invalid perf result especially when event multiplexing
is needed (i.e. more number of events than available counters) since
the current logic keeps track of the previously read counter value,
and subsequently re-program the counter to continue counting the event.
With power-gating enabled, we cannot gurantee successful re-programming
of the counter.

Workaround this issue by :

1. Modifying the ordering of setting/reading counters and enabing/
   disabling csources to only access the counter when the csource
   is set to non-zero.

2. Since AMD IOMMU PMU does not support interrupt mode, the logic
   can be simplified to always start counting with value zero,
   and accumulate the counter value when stopping without the need
   to keep track and reprogram the counter with the previously read
   counter value.

This has been tested on systems with and without power-gating.

Fixes: 994d6608efe4 ("iommu/amd: Remove performance counter pre-initialization test")
Suggested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210504065236.4415-1-suravee.suthikulpanit@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"

commit 2115d3d482656ea702f7cf308c0ded3500282903 upstream.

This reverts commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207.

This is used to re-enable ASPM on RTL8106e, if it is possible.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: drop termiox user definitions

commit c762a2b846b619c0f92f23e2e8e16f70d20df800 upstream.

As was concluded in a follow-up discussion of commit e0efb3168d34 (tty:
Remove dead termiox code) [1], termiox ioctls never worked, so there is
barely anyone using this interface. We can safely remove the user
definitions for this never adopted interface.

[1] https://lore.kernel.org/lkml/c1c9fc04-02eb-2260-195b-44c357f057c0@kernel.org/t/#u

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-12-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handling

commit 97f53a08cba128a724ebbbf34778d3553d559816 upstream.

The previous Kconfig patch led to some other build errors as
reported by the 0day bot and my own overnight build testing.

These are all in <linux/skbuff.h> when KCOV is enabled but
SKB_EXTENSIONS is not enabled, so fix those by combining those conditions
in the header file.

Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions")
Fixes: 85ce50d337d1 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201116212108.32465-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: 8250_omap: Fix unused variable warning

commit 6f991850412963381017cfb0d691cbd4d6a551dc upstream.

With commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable"),
below warning is seen with W=1 and CONFIG_SERIAL_8250_DMA is disabled:

   drivers/tty/serial/8250/8250_omap.c:1199:42: warning: unused variable 'k3_soc_devices' [-Wunused-const-variable]

Fix this by moving the code using k3_soc_devices array to
omap_serial_fill_features_erratas() that handles other errata flags as
well.

Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20201111112653.2710-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: kcov: don't select SKB_EXTENSIONS when there is no NET

commit 85ce50d337d10a6fd328fa70b0a15543bf5c0f64 upstream.

Fix kconfig warning when CONFIG_NET is not set/enabled:

WARNING: unmet direct dependencies detected for SKB_EXTENSIONS
  Depends on [n]: NET [=n]
  Selected by [y]:
  - KCOV [=y] && ARCH_HAS_KCOV [=y] && (CC_HAS_SANCOV_TRACE_PC [=y] || GCC_PLUGINS [=n])

Fixes: 6370cc3bbd8a ("net: add kcov handle to skb extensions")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201110175746.11437-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_alloc: speed up the iteration of max_order

commit 7ad69832f37e3cea8557db6df7c793905f1135e8 upstream.

When we free a page whose order is very close to MAX_ORDER and greater
than pageblock_order, it wastes some CPU cycles to increase max_order to
MAX_ORDER one by one and check the pageblock migratetype of that page
repeatedly especially when MAX_ORDER is much larger than pageblock_order.

We also should not be checking migratetype of buddy when "order ==
MAX_ORDER - 1" as the buddy pfn may be invalid, so adjust the condition.
With the new check, we don't need the max_order check anymore, so we
replace it.

Also adjust max_order initialization so that it's lower by one than
previously, which makes the code hopefully more clear.

Link: https://lkml.kernel.org/r/20201204155109.55451-1-songmuchun@bytedance.com
Fixes: d9dddbf55667 ("mm/page_alloc: prevent merging between isolated and other pageblocks")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ll_temac: Remove left-over debug message

commit ce03b94ba682a67e8233c9ee3066071656ded58f upstream.

Fixes: f63963411942 ("net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY")
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7720: improve OOM-handling in read_mos_reg()

commit 161a582bd1d8681095f158d11bc679a58f1d026b upstream.

clang static analysis reports this problem

mos7720.c:352:2: warning: Undefined or garbage value returned to caller
        return d;
        ^~~~~~~~

In the parport_mos7715_read_data()'s call to read_mos_reg(), 'd' is
only set after the alloc block.

buf = kmalloc(1, GFP_KERNEL);
if (!buf)
return -ENOMEM;

Although the problem is reported in parport_most7715_read_data(),
none of the callee's of read_mos_reg() check the return status.

Make sure to clear the return-value buffer also on allocation failures.

Fixes: 0d130367abf5 ("USB: serial: mos7720: fix control-message error handling")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210111220904.1035957-1-trix@redhat.com
[ johan: only clear the buffer on errors, amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igmp: Add ip_mc_list lock in ip_check_mc_rcu

commit 23d2b94043ca8835bd1e67749020e839f396a1c2 upstream.

I got below panic when doing fuzz test:

Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 4056 Comm: syz-executor.3 Tainted: G    B             5.14.0-rc1-00195-gcff5c4254439-dirty #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x7a/0x9b
panic+0x2cd/0x5af
end_report.cold+0x5a/0x5a
kasan_report+0xec/0x110
ip_check_mc_rcu+0x556/0x5d0
__mkroute_output+0x895/0x1740
ip_route_output_key_hash_rcu+0x2d0/0x1050
ip_route_output_key_hash+0x182/0x2e0
ip_route_output_flow+0x28/0x130
udp_sendmsg+0x165d/0x2280
udpv6_sendmsg+0x121e/0x24f0
inet6_sendmsg+0xf7/0x140
sock_sendmsg+0xe9/0x180
____sys_sendmsg+0x2b8/0x7a0
___sys_sendmsg+0xf0/0x160
__sys_sendmmsg+0x17e/0x3c0
__x64_sys_sendmmsg+0x9e/0x100
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x462eb9
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8
 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48>
 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3df5af1c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462eb9
RDX: 0000000000000312 RSI: 0000000020001700 RDI: 0000000000000007
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3df5af26bc
R13: 00000000004c372d R14: 0000000000700b10 R15: 00000000ffffffff

It is one use-after-free in ip_check_mc_rcu.
In ip_mc_del_src, the ip_sf_list of pmc has been freed under pmc->lock protection.
But access to ip_sf_list in ip_check_mc_rcu is not protected by the lock.

Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.63

Link: https://lore.kernel.org/r/20210906125449.756437409@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>

media: stkwebcam: fix memory leak in stk_camera_probe

commit 514e97674400462cc09c459a1ddfb9bf39017223 upstream.

My local syzbot instance hit memory leak in usb_set_configuration().
The problem was in unputted usb interface. In case of errors after
usb_get_intf() the reference should be putted to correclty free memory
allocated for this interface.

Fixes: ec16dae5453e ("V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix illegal access to inode with reused nodeid

commit 15db16837a35d8007cb8563358787412213db25e upstream.

Server responds to LOOKUP and other ops (READDIRPLUS/CREATE/MKNOD/...)
with ourarg containing nodeid and generation.

If a fuse inode is found in inode cache with the same nodeid but different
generation, the existing fuse inode should be unhashed and marked "bad" and
a new inode with the new generation should be hashed instead.

This can happen, for example, with passhrough fuse filesystem that returns
the real filesystem ino/generation on lookup and where real inode numbers
can get recycled due to real files being unlinked not via the fuse
passthrough filesystem.

With current code, this situation will not be detected and an old fuse
dentry that used to point to an older generation real inode, can be used to
access a completely new inode, which should be accessed only via the new
dentry.

Note that because the FORGET message carries the nodeid w/o generation, the
server should wait to get FORGET counts for the nlookup counts of the old
and reused inodes combined, before it can free the resources associated to
that nodeid.

Stable backport notes:
* This is not a regression. The bug has been in fuse forever, but only
  a certain class of low level fuse filesystems can trigger this bug
* Because there is no way to check if this fix is applied in runtime,
  libfuse test_examples.py tests this fix with hardcoded check for
  kernel version >= 5.14
* After backport to stable kernel(s), the libfuse test can be updated
  to also check minimal stable kernel version(s)
* Depends on "fuse: fix bad inode" which is already applied to stable
  kernels v5.4.y and v5.10.y
* Required backporting helper inode_wrong_type()

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-fsdevel/CAOQ4uxi8DymG=JO_sAU+wS8akFdzh+PuXwW3Ebgahd2Nwnh7zA@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

new helper: inode_wrong_type()

commit 6e3e2c4362e41a2f18e3f7a5ad81bd2f49a47b85 upstream.

inode_wrong_type(inode, mode) returns true if setting inode->i_mode
to given value would've changed the inode type.  We have enough of
those checks open-coded to make a helper worthwhile.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: Switch to signed types for *_native_cs SPI controller fields

commit 35f3f8504c3b60a1ae5576e178b27fc0ddd6157d upstream.

While fixing undefined behaviour the commit f60d7270c8a3 ("spi: Avoid
undefined behaviour when counting unused native CSs") missed the case
when all CSs are GPIOs and thus unused_native_cs will be evaluated to
-1 in unsigned representation. This will falsely trigger a condition
in the spi_get_gpio_descs().

Switch to signed types for *_native_cs SPI controller fields to fix above.

Fixes: f60d7270c8a3 ("spi: Avoid undefined behaviour when counting unused native CSs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131242.49455-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250: 8250_omap: Fix possible array out of bounds access

commit d4548b14dd7e5c698f81ce23ce7b69a896373b45 upstream.

k3_soc_devices array is missing a sentinel entry which may result in out
of bounds access as reported by kernel KASAN.

Fix this by adding a sentinel entry.

Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20201111112653.2710-1-vigneshr@ti.com
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: fix divide error in snd_pcm_lib_ioctl

commit f3eef46f0518a2b32ca1244015820c35a22cfe4a upstream.

Syzkaller reported a divide error in snd_pcm_lib_ioctl. fifo_size
is of type snd_pcm_uframes_t(unsigned long). If frame_size
is 0x100000000, the error occurs.

Fixes: a9960e6a293e ("ALSA: pcm: fix fifo_size frame calculation")
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210827153735.789452-1-zsm@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Workaround for conflicting SSID on ASUS ROG Strix G17

commit 13d9c6b998aaa76fd098133277a28a21f2cc2264 upstream.

ASUS ROG Strix G17 has the very same PCI and codec SSID (1043:103f) as
ASUS TX300, and unfortunately, the existing quirk for TX300 is broken
on ASUS ROG.  Actually the device works without the quirk, so we'll
need to clear the quirk before applying for this device.
Since ASUS ROG has a different codec (ALC294 - while TX300 has
ALC282), this patch adds a workaround for the device, just clearing
the codec->fixup_id by checking the codec vendor_id.

It's a bit ugly to add such a workaround there, but it seems to be the
simplest way.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214101
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210820143214.3654-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup

commit 93ab3eafb0b3551c54175cb38afed3b82356a047 upstream.

This patch extends support for the HP Spectre x360 14
amp enable quirk to support a model of the device with
an additional subdevice ID.

Signed-off-by: Johnathon Clark <john.clark@cantab.net>
Link: https://lore.kernel.org/r/20210823162110.8870-1-john.clark@cantab.net
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cryptoloop: add a deprecation warning

[ Upstream commit 222013f9ac30b9cec44301daa8dbd0aae38abffb ]

Support for cryptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013).  Add a warning and a deprecation schedule.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/amd/power: Assign pmu.module

[ Upstream commit ccf26483416a339c114409f6e7cd02abdeaf8052 ]

Assign pmu.module so the driver can't be unloaded whilst in use.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-4-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/amd/ibs: Work around erratum #1197

[ Upstream commit 26db2e0c51fe83e1dd852c1321407835b481806e ]

Erratum #1197 "IBS (Instruction Based Sampling) Register State May be
Incorrect After Restore From CC6" is published in a document:

  "Revision Guide for AMD Family 19h Models 00h-0Fh Processors" 56683 Rev. 1.04 July 2021

  https://bugzilla.kernel.org/show_bug.cgi?id=206537

Implement the erratum's suggested workaround and ignore IBS samples if
MSRC001_1031 == 0.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-3-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()

[ Upstream commit a9e6ffbc5b7324b6639ee89028908b1e91ceed51 ]

kcalloc() is called to allocate memory for m->m_info, and if it fails,
ceph_mdsmap_destroy() behind the label out_err will be called:
  ceph_mdsmap_destroy(m);

In ceph_mdsmap_destroy(), m->m_info is dereferenced through:
  kfree(m->m_info[i].export_targets);

To fix this possible null-pointer dereference, check m->m_info before the
for loop to free m->m_info[i].export_targets.

[ jlayton: fix up whitespace damage
   only kfree(m->m_info) if it's non-NULL ]

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/pt: Fix mask of num_address_ranges

[ Upstream commit c53c6b7409f4cd9e542991b53d597fbe2751d7db ]

Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of
configurable address ranges for filtering, not bit 1:0.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

qede: Fix memset corruption

[ Upstream commit e543468869e2532f5d7926e8f417782b48eca3dc ]

Thanks to Kees Cook who detected the problem of memset that starting
from not the first member, but sized for the whole struct.
The better change will be to remove the redundant memset and to clear
only the msix_cnt member.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: Add a NULL check on desc_ptp

[ Upstream commit 85520079afce885b80647fbd0d13d8f03d057167 ]

macb_ptp_desc will not return NULL under most circumstances with correct
Kconfig and IP design config register. But for the sake of the extreme
corner case, check for NULL when using the helper. In case of rx_tstamp,
no action is necessary except to return (similar to timestamp disabled)
and warn. In case of TX, return -EINVAL to let the skb be free. Perform
this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix the VF msix vectors flow

[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ]

For VFs we should return with an error in case we didn't get the exact
number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: reset-zynqmp: Fixed the argument data type

[ Upstream commit ed104ca4bd9c405b41e968ad4ece51f6462e90b6 ]

This patch changes the data type of the variable 'val' from
int to u32.

Addresses-Coverity: argument of type "int *" is incompatible with parameter of type "u32 *"
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/925cebbe4eb73c7d0a536da204748d33c7100d8c.1624448778.git.michal.simek@xilinx.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats

[ Upstream commit 7cca7c8096e2c8a4149405438329b5035d0744f0 ]

Video captured in 1400x1050 resolution (bytesperline aka stride = 1408
bytes) is invalid. Fix it.

Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/r/m3y2bmq7a4.fsf@t19.piap.pl
[p.zabel@pengutronix.de: added "gpu: ipu-v3:" prefix to commit description]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power

commit bae989c4bc53f861cc1b706aab0194703e9907a8 upstream.

The ams_delta_camera_power() function is unused as reports
Clang compilation with omap1_defconfig on linux-next:

arch/arm/mach-omap1/board-ams-delta.c:462:12: warning: unused function 'ams_delta_camera_power' [-Wunused-function]
static int ams_delta_camera_power(struct device *dev, int power)
           ^
1 warning generated.

The soc_camera support was dropped without removing
ams_delta_camera_power() function, making it unused.

Fixes: ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies")
Signed-off-by: Maciej Falkowski <maciej.falkowski9@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1326
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG

commit ed5aacc81cd41efc4d561e14af408d1003f7b855 upstream.

XTENSA should only select HAVE_FUTEX_CMPXCHG when FUTEX is
set/enabled. This prevents a kconfig warning.

WARNING: unmet direct dependencies detected for HAVE_FUTEX_CMPXCHG
  Depends on [n]: FUTEX [=n]
  Selected by [y]:
  - XTENSA [=y] && !MMU [=n]

Fixes: d951ba21b959 ("xtensa: nommu: select HAVE_FUTEX_CMPXCHG")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Message-Id: <20210526070337.28130-1-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

static_call: Fix unused variable warn w/o MODULE

commit 7d95f22798ecea513f37b792b39fec4bcf20fec3 upstream.

Here is the warning converted as error and reported by GCC:

  kernel/static_call.c: In function ‘__static_call_update’:
  kernel/static_call.c:153:18: error: unused variable ‘mod’ [-Werror=unused-variable]
    153 |   struct module *mod = site_mod->mod;
        |                  ^~~
  cc1: all warnings being treated as errors
  make[1]: *** [scripts/Makefile.build:271: kernel/static_call.o] Error 1

This is simply because since recently, we no longer use 'mod' variable
elsewhere if MODULE is unset.

When using 'make tinyconfig' to generate the default kconfig, MODULE is
unset.

There are different ways to fix this warning. Here I tried to minimised
the number of modified lines and not add more #ifdef. We could also move
the declaration of the 'mod' variable inside the if-statement or
directly use site_mod->mod.

Fixes: 698bacefe993 ("static_call: Align static_call_is_init() patching condition")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210326105023.2058860-1-matthieu.baerts@tessares.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Add a reference to ucounts for each cred"

This reverts commit b2c4d9a33cc2dec7466f97eba2c4dd571ad798a5 which is
commit 905ae01c4ae2ae3df05bb141801b1db4b7d83c61 upstream.

This commit should not have been applied to the 5.10.y stable tree, so
revert it.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/87v93k4bl6.fsf@disp2133
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "cred: add missing return error code when set_cred_ucounts() failed"

This reverts commit 0855952ed4f1a6861fbb0e5d684efd447d7347c9 which is
commit 5e6b8a50a7cec5686ee2c4bda1d49899c79a7eae upstream.

The "original" commit 905ae01c4ae2 ("Add a reference to ucounts for each
cred"), should not have been applied to the 5.10.y tree, so revert it,
and the follow-on fixup patches as well.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/87v93k4bl6.fsf@disp2133
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ucounts: Increase ucounts reference counter before the security hook"

This reverts commit b493af3a66e067f93e5e03465507866ddeabff9e which is
commit bbb6d0f3e1feb43d663af089c7dedb23be6a04fb upstream.

The "original" commit 905ae01c4ae2 ("Add a reference to ucounts for each
cred"), should not have been applied to the 5.10.y tree, so revert it,
and the follow-on fixup patches as well.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/87v93k4bl6.fsf@disp2133
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: report correct st_size for encrypted symlinks

commit 064c734986011390b4d111f1a99372b7f26c3850 upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after ubifs_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: ca7f85be8d6c ("ubifs: Add support for encrypted symlinks")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: report correct st_size for encrypted symlinks

commit 461b43a8f92e68e96c4424b31e15f2b35f1bbfa9 upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after f2fs_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: cbaf042a3cc6 ("f2fs crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: report correct st_size for encrypted symlinks

commit 8c4bca10ceafc43b1ca0a9fab5fa27e13cbce99e upstream.

The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after ext4_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: f348c252320b ("ext4 crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypt: add fscrypt_symlink_getattr() for computing st_size

commit d18760560593e5af921f51a8c9b64b6109d634c2 upstream.

Add a helper function fscrypt_symlink_getattr() which will be called
from the various filesystems' ->getattr() methods to read and decrypt
the target of encrypted symlinks in order to report the correct st_size.

Detailed explanation:

As required by POSIX and as documented in various man pages, st_size for
a symlink is supposed to be the length of the symlink target.
Unfortunately, st_size has always been wrong for encrypted symlinks
because st_size is populated from i_size from disk, which intentionally
contains the length of the encrypted symlink target.  That's slightly
greater than the length of the decrypted symlink target (which is the
symlink target that userspace usually sees), and usually won't match the
length of the no-key encoded symlink target either.

This hadn't been fixed yet because reporting the correct st_size would
require reading the symlink target from disk and decrypting or encoding
it, which historically has been considered too heavyweight to do in
->getattr().  Also historically, the wrong st_size had only broken a
test (LTP lstat03) and there were no known complaints from real users.
(This is probably because the st_size of symlinks isn't used too often,
and when it is, typically it's for a hint for what buffer size to pass
to readlink() -- which a slightly-too-large size still works for.)

However, a couple things have changed now.  First, there have recently
been complaints about the current behavior from real users:

- Breakage in rpmbuild:
  https://github.com/rpm-software-management/rpm/issues/1682
  https://github.com/google/fscrypt/issues/305

- Breakage in toybox cpio:
  https://www.mail-archive.com/toybox@lists.landley.net/msg07193.html

- Breakage in libgit2: https://issuetracker.google.com/issues/189629152
  (on Android public issue tracker, requires login)

Second, we now cache decrypted symlink targets in ->i_link.  Therefore,
taking the performance hit of reading and decrypting the symlink target
in ->getattr() wouldn't be as big a deal as it used to be, since usually
it will just save having to do the same thing later.

Also note that eCryptfs ended up having to read and decrypt symlink
targets in ->getattr() as well, to fix this same issue; see
commit 3a60a1686f0d ("eCryptfs: Decrypt symlink target for stat size").

So, let's just bite the bullet, and read and decrypt the symlink target
in ->getattr() in order to report the correct st_size.  Add a function
fscrypt_symlink_getattr() which the filesystems will call to do this.

(Alternatively, we could store the decrypted size of symlinks on-disk.
But there isn't a great place to do so, and encryption is meant to hide
the original size to some extent; that property would be lost.)

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix race writing to an inline_data file while its xattrs are changing

commit a54c4613dac1500b40e4ab55199f7c51f028e848 upstream.

The location of the system.data extended attribute can change whenever
xattr_sem is not taken.  So we need to recalculate the i_inline_off
field since it mgiht have changed between ext4_write_begin() and
ext4_write_end().

This means that caching i_inline_off is probably not helpful, so in
the long run we should probably get rid of it and shrink the in-memory
ext4 inode slightly, but let's fix the race the simple way for now.

Cc: stable@kernel.org
Fixes: f19d5870cbf72 ("ext4: add normal write support for inline data")
Reported-by: syzbot+13146364637c7363a7de@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.62

Link: https://lore.kernel.org/r/20210901122300.503008474@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix potentially incorrect results with bpf_get_local_storage()

commit a2baf4e8bb0f306fbed7b5e6197c02896a638ab5 upstream.

Commit b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage()
helper") fixed a bug for bpf_get_local_storage() helper so different tasks
won't mess up with each other's percpu local storage.

The percpu data contains 8 slots so it can hold up to 8 contexts (same or
different tasks), for 8 different program runs, at the same time. This in
general is sufficient. But our internal testing showed the following warning
multiple times:

  [...]
  warning: WARNING: CPU: 13 PID: 41661 at include/linux/bpf-cgroup.h:193
     __cgroup_bpf_run_filter_sock_ops+0x13e/0x180
  RIP: 0010:__cgroup_bpf_run_filter_sock_ops+0x13e/0x180
  <IRQ>
   tcp_call_bpf.constprop.99+0x93/0xc0
   tcp_conn_request+0x41e/0xa50
   ? tcp_rcv_state_process+0x203/0xe00
   tcp_rcv_state_process+0x203/0xe00
   ? sk_filter_trim_cap+0xbc/0x210
   ? tcp_v6_inbound_md5_hash.constprop.41+0x44/0x160
   tcp_v6_do_rcv+0x181/0x3e0
   tcp_v6_rcv+0xc65/0xcb0
   ip6_protocol_deliver_rcu+0xbd/0x450
   ip6_input_finish+0x11/0x20
   ip6_input+0xb5/0xc0
   ip6_sublist_rcv_finish+0x37/0x50
   ip6_sublist_rcv+0x1dc/0x270
   ipv6_list_rcv+0x113/0x140
   __netif_receive_skb_list_core+0x1a0/0x210
   netif_receive_skb_list_internal+0x186/0x2a0
   gro_normal_list.part.170+0x19/0x40
   napi_complete_done+0x65/0x150
   mlx5e_napi_poll+0x1ae/0x680
   __napi_poll+0x25/0x120
   net_rx_action+0x11e/0x280
   __do_softirq+0xbb/0x271
   irq_exit_rcu+0x97/0xa0
   common_interrupt+0x7f/0xa0
   </IRQ>
   asm_common_interrupt+0x1e/0x40
  RIP: 0010:bpf_prog_1835a9241238291a_tw_egress+0x5/0xbac
   ? __cgroup_bpf_run_filter_skb+0x378/0x4e0
   ? do_softirq+0x34/0x70
   ? ip6_finish_output2+0x266/0x590
   ? ip6_finish_output+0x66/0xa0
   ? ip6_output+0x6c/0x130
   ? ip6_xmit+0x279/0x550
   ? ip6_dst_check+0x61/0xd0
  [...]

Using drgn [0] to dump the percpu buffer contents showed that on this CPU
slot 0 is still available, but slots 1-7 are occupied and those tasks in
slots 1-7 mostly don't exist any more. So we might have issues in
bpf_cgroup_storage_unset().

Further debugging confirmed that there is a bug in bpf_cgroup_storage_unset().
Currently, it tries to unset "current" slot with searching from the start.
So the following sequence is possible:

  1. A task is running and claims slot 0
  2. Running BPF program is done, and it checked slot 0 has the "task"
     and ready to reset it to NULL (not yet).
  3. An interrupt happens, another BPF program runs and it claims slot 1
     with the *same* task.
  4. The unset() in interrupt context releases slot 0 since it matches "task".
  5. Interrupt is done, the task in process context reset slot 0.

At the end, slot 1 is not reset and the same process can continue to occupy
slots 2-7 and finally, when the above step 1-5 is repeated again, step 3 BPF
program won't be able to claim an empty slot and a warning will be issued.

To fix the issue, for unset() function, we should traverse from the last slot
to the first. This way, the above issue can be avoided.

The same reverse traversal should also be done in bpf_get_local_storage() helper
itself. Otherwise, incorrect local storage may be returned to BPF program.

  [0] https://github.com/osandov/drgn

Fixes: b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210810010413.1976277-1-yhs@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: move put_tree() to avoid trim_trees refcount underflow and UAF

commit 67d69e9d1a6c889d98951c1d74b19332ce0565af upstream.

AUDIT_TRIM is expected to be idempotent, but multiple executions resulted
in a refcount underflow and use-after-free.

git bisect fingered commit fb041bb7c0a9 ("locking/refcount: Consolidate
implementations of refcount_t") but this patch with its more thorough
checking that wasn't in the x86 assembly code merely exposed a previously
existing tree refcount imbalance in the case of tree trimming code that
was refactored with prune_one() to remove a tree introduced in
commit 8432c7006297 ("audit: Simplify locking around untag_chunk()")

Move the put_tree() to cover only the prune_one() case.

Passes audit-testsuite and 3 passes of "auditctl -t" with at least one
directory watch.

Cc: Jan Kara <jack@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Seiji Nishikawa <snishika@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8432c7006297 ("audit: Simplify locking around untag_chunk()")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
[PM: reformatted/cleaned-up the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: don't unconditionally copy_from_user a struct ifreq for socket ioctls

commit d0efb16294d145d157432feda83877ae9d7cdf37 upstream.

A common implementation of isatty(3) involves calling a ioctl passing
a dummy struct argument and checking whether the syscall failed --
bionic and glibc use TCGETS (passing a struct termios), and musl uses
TIOCGWINSZ (passing a struct winsize). If the FD is a socket, we will
copy sizeof(struct ifreq) bytes of data from the argument and return
-EFAULT if that fails. The result is that the isatty implementations
may return a non-POSIX-compliant value in errno in the case where part
of the dummy struct argument is inaccessible, as both struct termios
and struct winsize are smaller than struct ifreq (at least on arm64).

Although there is usually enough stack space following the argument
on the stack that this did not present a practical problem up to now,
with MTE stack instrumentation it's more likely for the copy to fail,
as the memory following the struct may have a different tag.

Fix the problem by adding an early check for whether the ioctl is a
valid socket ioctl, and return -ENOTTY if it isn't.

Fixes: 44c02a2c3dc5 ("dev_ioctl(): move copyin/copyout to callers")
Link: https://linux-review.googlesource.com/id/I869da6cf6daabc3e4b7b82ac979683ba05e27d4d
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "parisc: Add assembly implementations for memset, strlen, strcpy, strncpy and strcat"

commit f6a3308d6feb351d9854eb8b3f6289a1ac163125 upstream.

This reverts commit 83af58f8068ea3f7b3c537c37a30887bfa585069.

It turns out that at least the assembly implementation for strncpy() was
buggy.  Revert the whole commit and return back to the default coding.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "floppy: reintroduce O_NDELAY fix"

commit c7e9d0020361f4308a70cdfd6d5335e273eb8717 upstream.

The patch breaks userspace implementations (e.g. fdutils) and introduces
regressions in behaviour. Previously, it was possible to O_NDELAY open a
floppy device with no media inserted or with write protected media without
an error. Some userspace tools use this particular behavior for probing.

It's not the first time when we revert this patch. Previous revert is in
commit f2791e7eadf4 (Revert "floppy: refactor open() flags handling").

This reverts commit 8a0c014cd20516ade9654fc13b51345ec58e7be8.

Link: https://lore.kernel.org/linux-block/de10cb47-34d1-5a88-7751-225ca380f735@compro.net/
Reported-by: Mark Hounschell <markh@compro.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Wim Osterholt <wim@djo.tudelft.nl>
Cc: Kurt Garloff <kurt@garloff.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kthread: Fix PF_KTHREAD vs to_kthread() race

commit 3a7956e25e1d7b3c148569e78895e1f3178122a9 upstream.

The kthread_is_per_cpu() construct relies on only being called on
PF_KTHREAD tasks (per the WARN in to_kthread). This gives rise to the
following usage pattern:

if ((p->flags & PF_KTHREAD) && kthread_is_per_cpu(p))

However, as reported by syzcaller, this is broken. The scenario is:

CPU0 CPU1 (running p)

(p->flags & PF_KTHREAD) // true

begin_new_exec()
  me->flags &= ~(PF_KTHREAD|...);
kthread_is_per_cpu(p)
  to_kthread(p)
    WARN(!(p->flags & PF_KTHREAD) <-- *SPLAT*

Introduce __to_kthread() that omits the WARN and is sure to check both
values.

Use this to remove the problematic pattern for kthread_is_per_cpu()
and fix a number of other kthread_*() functions that have similar
issues but are currently not used in ways that would expose the
problem.

Notably kthread_func() is only ever called on 'current', while
kthread_probe_data() is only used for PF_WQ_WORKER, which implies the
task is from kthread_create*().

Fixes: ac687e6e8c26 ("kthread: Extract KTHREAD_IS_PER_CPU")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lkml.kernel.org/r/YH6WJc825C4P0FCK@hirez.programming.kicks-ass.net
[ Drop the balance_push() hunk as it is not needed. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix NULL pointer dereference when deleting device by invalid id

commit e4571b8c5e9ffa1e85c0c671995bd4dcc5c75091 upstream.

[BUG]
It's easy to trigger NULL pointer dereference, just by removing a
non-existing device id:

 # mkfs.btrfs -f -m single -d single /dev/test/scratch1 \
     /dev/test/scratch2
 # mount /dev/test/scratch1 /mnt/btrfs
 # btrfs device remove 3 /mnt/btrfs

Then we have the following kernel NULL pointer dereference:

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 9 PID: 649 Comm: btrfs Not tainted 5.14.0-rc3-custom+ #35
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
 RIP: 0010:btrfs_rm_device+0x4de/0x6b0 [btrfs]
  btrfs_ioctl+0x18bb/0x3190 [btrfs]
  ? lock_is_held_type+0xa5/0x120
  ? find_held_lock.constprop.0+0x2b/0x80
  ? do_user_addr_fault+0x201/0x6a0
  ? lock_release+0xd2/0x2d0
  ? __x64_sys_ioctl+0x83/0xb0
  __x64_sys_ioctl+0x83/0xb0
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

[CAUSE]
Commit a27a94c2b0c7 ("btrfs: Make btrfs_find_device_by_devspec return
btrfs_device directly") moves the "missing" device path check into
btrfs_rm_device().

But btrfs_rm_device() itself can have case where it only receives
@devid, with NULL as @device_path.

In that case, calling strcmp() on NULL will trigger the NULL pointer
dereference.

Before that commit, we handle the "missing" case inside
btrfs_find_device_by_devspec(), which will not check @device_path at all
if @devid is provided, thus no way to trigger the bug.

[FIX]
Before calling strcmp(), also make sure @device_path is not NULL.

Fixes: a27a94c2b0c7 ("btrfs: Make btrfs_find_device_by_devspec return btrfs_device directly")
CC: stable@vger.kernel.org # 5.4+
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>