Tony Luck [Sat, 24 Oct 2009 00:59:06 +0000 (17:59 -0700)]
Pull ticket-spinaphore into release branch
Tony Luck [Sat, 24 Oct 2009 00:58:54 +0000 (17:58 -0700)]
Pull ticket4byte into release branch
Randy Dunlap [Wed, 14 Oct 2009 22:10:03 +0000 (15:10 -0700)]
[IA64] fix percpu warnings
Fix percpu types warning in ia64/sn:
arch/ia64/sn/kernel/setup.c:74: error: conflicting types for '__pcpu_scope___sn_cnodeid_to_nasid'
arch/ia64/include/asm/sn/arch.h:74: error: previous declaration of '__pcpu_scope___sn_cnodeid_to_nasid' was here
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jes Sorensen <jes@sgi.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tony Luck [Mon, 12 Oct 2009 16:51:41 +0000 (09:51 -0700)]
[IA64] SMT friendly version of spin_unlock_wait()
We can be kinder to SMT systems in spin_unlock_wait.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Marcin Slusarz [Fri, 18 Sep 2009 19:48:12 +0000 (12:48 -0700)]
[IA64] use printk_once() unaligned.c/io_common.c
Use printk_once() in a couple of places.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Matthew Wilcox [Mon, 12 Oct 2009 14:24:30 +0000 (08:24 -0600)]
[IA64] Require SAL 3.2 in order to do extended config space ops
We had assumed that SAL firmware would return an error if it didn't
understand extended config space. Unfortunately, the SAL on the SGI 750
doesn't do that, it panics the machine. So, condition the extended PCI
config space accesses on SAL revision 3.2.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Tested-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Roel Kluin [Sat, 10 Oct 2009 20:21:59 +0000 (22:21 +0200)]
[IA64] unsigned cannot be less than 0 in sn_hwperf_ioctl()
struct sn_hwperf_ioctl_args member arg (u64) cannot be less than 0.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Takao Indoh [Thu, 1 Oct 2009 21:55:16 +0000 (17:55 -0400)]
[IA64] Restore registers in the stack on INIT
Registers are not saved anywhere when INIT comes during fsys mode and
we cannot know what happened when we investigate vmcore captured by
kdump. This patch adds new function finish_pt_regs() so registers can
be saved in such a case.
Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Linus Torvalds [Mon, 12 Oct 2009 21:38:34 +0000 (14:38 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: Prevent AER driver from being loaded on non-root port PCIE devices
PCI: get larger bridge ranges when space is available
PCI: pci.c: fix kernel-doc notation
PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers
PCI PM: Read device power state from register after updating it
PCI: remove pci_assign_resource_fixed()
PCI: PCIe portdrv: remove "-driver" from driver name
Linus Torvalds [Mon, 12 Oct 2009 21:37:49 +0000 (14:37 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits)
ARM: force dcache flush if dcache_dirty bit set
[ARM] pxa: workaround errata #37 by not using half turbo switching
[ARM] pxamci: fix printing gpio numbers in pxamci_probe
[ARM] pxa/csb726: adjust duplicate structure field initialization
ARM: Add kmap_atomic type debugging
ARM: boolean bit testing
ARM: update die() output
ARM: Dump code/mem oops lines with the appropriate log level
ARM: Dump memory and backtrace as one printk per line
ARM: 5756/1: ep93xx: introduce clk parent
ARM: 5754/1: ep93xx: update i2c support
ARM: 5753/1: ep93xx: remove old EP93XX_GPIO_* defines
ARM: 5729/1: ep93xx: define EP93XX_*_PHYS_BASE with macros
ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim
ARM: 5750/1: ep93xx/micro9: Update platform code
ARM: 5749/1: ep93xx/micro9: Update maintainer
ARM: 5752/1: SA1100: fix building of h3100
ARM: 5748/1: bcmring: fix build warning messages
ARM: 5747/1: Fix the start_pg value in free_memmap()
ARM: 5746/1: Handle possible translation errors in ARMv6/v7 coherent_user_range
...
Mike Frysinger [Mon, 12 Oct 2009 13:49:56 +0000 (09:49 -0400)]
USB: musb: invert arch depend string
The MUSB code relies on platform implementations that currently only
exists for Arm and Blackfin processors, so have the MUSB Kconfig depend
upon those arches.
This should prevent other arches from building MUSB via randconfig.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefan Richter [Mon, 12 Oct 2009 15:26:12 +0000 (11:26 -0400)]
NFS: suppress a build warning
struct sockaddr_storage * can safely be used as struct sockaddr *.
Suppress an "incompatible pointer type" warning.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 12 Oct 2009 17:13:54 +0000 (19:13 +0200)]
tty, serial: Fix race and NULL check in uart_close()
Commit
46d57a449aa1 ("serial: use tty_port pointers in the core code")
contained two bugs that causes (rare) crashes:
- the rename typoed one site
- a NULL check was missed
Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nitin Gupta [Mon, 12 Oct 2009 08:50:23 +0000 (14:20 +0530)]
ARM: force dcache flush if dcache_dirty bit set
On ARM, update_mmu_cache() does dcache flush for a page only if
it has a kernel mapping (page_mapping(page) != NULL). The correct
behavior would be to force the flush based on dcache_dirty bit only.
One of the cases where present logic would be a problem is when
a RAM based block device[1] is used as a swap disk. In this case,
we would have in-memory data corruption as shown in steps below:
do_swap_page()
{
- Allocate a new page (if not already in swap cache)
- Issue read from swap disk
- Block driver issues flush_dcache_page()
- flush_dcache_page() simply sets PG_dcache_dirty bit and does not
actually issue a flush since this page has no user space mapping yet.
- Now, if swap disk is almost full, this newly read page is removed
from swap cache and corrsponding swap slot is freed.
- Map this page anonymously in user space.
- update_mmu_cache()
- Since this page does not have kernel mapping (its not in page/swap
cache and is mapped anonymously), it does not issue dcache flush
even if dcache_dirty bit is set by flush_dcache_page() above.
<user now gets stale data since dcache was never flushed>
}
Same problem exists on mips too.
[1] example:
- brd (RAM based block device)
- ramzswap (RAM based compressed swap device)
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Mon, 12 Oct 2009 13:38:08 +0000 (14:38 +0100)]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6
Dennis O'Brien [Sat, 10 Oct 2009 07:08:52 +0000 (15:08 +0800)]
[ARM] pxa: workaround errata #37 by not using half turbo switching
PXA27x Errata #37 implies system will hang when switching into or out of
half turbo (HT bit in CLKCFG) mode, workaround this by not using it.
Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net>
Cc: stable-2.6.31 <stable@kernel.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Antonio Ospite [Fri, 2 Oct 2009 14:24:02 +0000 (16:24 +0200)]
[ARM] pxamci: fix printing gpio numbers in pxamci_probe
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Julia Lawall [Wed, 16 Sep 2009 09:06:52 +0000 (11:06 +0200)]
[ARM] pxa/csb726: adjust duplicate structure field initialization
Currently the irq_type field of the csb726_lan_config structure is
initialized twice. The value in the first case,
SMSC911X_IRQ_POLARITY_ACTIVE_LOW, is normally stored in the irq_polarity
field, so I have renamed the field in the first initialization to that.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Linus Torvalds [Sun, 11 Oct 2009 22:57:57 +0000 (15:57 -0700)]
Revert "USB: Work around BIOS bugs by quiescing USB controllers earlier"
This reverts commit
db8be50c4307dac2b37305fc59c8dc0f978d09ea, as per
http://bugzilla.kernel.org/show_bug.cgi?id=14374
http://marc.info/?l=linux-kernel&m=
125446885705223&w=4
We simply can't do the USB handoff at FIXUP_HEADER time, since it will
often require us to have valid IO mappings etc. But that in turn
requires a whole different approach, not this trivial one-liner.
Maybe we could teach all the USB quirk handoff handlers to only do the
quirk if the device has all its registers set up (since if it isn't
initialized, it's unlikely to be active), but regardless that will need
a whole lot more code than just saying "let's do it really early".
The proper fix is almost certainly to just leave the legacy IOMMU
mappings active until after all devices have been initialized.
Reported-by: Nick Piggin <npiggin@suse.de>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Oct 2009 21:43:56 +0000 (14:43 -0700)]
Linux 2.6.32-rc4
Yinghai Lu [Sun, 11 Oct 2009 21:17:16 +0000 (14:17 -0700)]
pci: increase alignment to make more space for hidden code
As reported in
http://bugzilla.kernel.org/show_bug.cgi?id=13940
on some system when acpi are enabled, acpi clears some BAR for some
devices without reason, and kernel will need to allocate devices for
them. It then apparently hits some undocumented resource conflict,
resulting in non-working devices.
Try to increase alignment to get more safe range for unassigned devices.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Oct 2009 18:34:50 +0000 (11:34 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (21 commits)
[S390] dasd: fix race condition in resume code
[S390] Add EX_TABLE for addressing exception in usercopy functions.
[S390] 64-bit register support for 31-bit processes
[S390] hibernate: Use correct place for CPU address in lowcore
[S390] pm: ignore time spend in suspended state
[S390] zcrypt: Improve some comments
[S390] zcrypt: Fix sparse warning.
[S390] perf_counter: fix vdso detection
[S390] ftrace: drop nmi protection
[S390] compat: fix truncate system call wrapper
[S390] Provide arch specific mdelay implementation.
[S390] Fix enabled udelay for short delays.
[S390] cio: allow setting boxed devices offline
[S390] cio: make not operational handling consistent
[S390] cio: make disconnected handling consistent
[S390] Fix memory leak in /proc/cio_ignore
[S390] cio: channel path memory leak
[S390] module: fix memory leak in s390 module loader
[S390] Enable kmemleak on s390.
[S390] 3270 console build fix
...
Bernd Schmidt [Tue, 6 Oct 2009 08:55:26 +0000 (09:55 +0100)]
ROMFS: fix length used with romfs_dev_strnlen() function
An interestingly corrupted romfs file system exposed a problem with the
romfs_dev_strnlen function: it's passing the wrong value to its helpers.
Rather than limit the string to the length passed in by the callers, it
uses the size of the device as the limit.
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Oct 2009 18:24:25 +0000 (11:24 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (32 commits)
USB: serial: no unnecessary GFP_ATOMIC in oti6858
USB: serial: fix race between unthrottle and completion handler in visor
USB: serial: fix assumption that throttle/unthrottle cannot sleep
USB: serial: fix race between unthrottle and completion handler in symbolserial
USB: serial: fix race between unthrottle and completion handler in opticon
USB: ehci: Fix isoc scheduling boundary checking.
USB: storage: When a device returns no sense data, call it a Hardware Error
USB: small fix in error case of suspend in generic usbserial code
USB: visor: fix trivial accounting bug in visor driver
USB: Fix throttling in generic usbserial driver
USB: cp210x: Add support for the DW700 UART
USB: ipaq: fix oops when device is plugged in
USB: isp1362: fix build warnings on 64-bit systems
USB: gadget: imx_udc: Use resource size
USB: storage: iRiver P7 UNUSUAL_DEV patch
USB: musb: make HAVE_CLK support optional
USB: xhci: Fix dropping endpoints from the xHC schedule.
USB: xhci: Don't wait for a disable slot cmd when HC dies.
USB: xhci: Handle canceled URBs when HC dies.
USB: xhci: Stop debugging polling loop when HC dies.
...
Linus Torvalds [Sun, 11 Oct 2009 18:24:05 +0000 (11:24 -0700)]
Merge git://git./linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: comedi: fix build on arches that don't want comedi drivers
Staging: comedi: pcmcia irq fixes
Staging: comedi: ni_pcimio: Added device id for pxi-6225.
Staging: comedi: ni_65xx.c: fix output inversion problem.
Staging: comedi: ni_65xx.c: fix insn_bits shift calculation.
Staging: comedi: s526: fixes for pulse generator
Staging: comedi: s526: Take account of arch's byte order.
Staging: comedi: s526: Get rid of global variable 'cmReg'.
Staging: comedi: s526: Fix number of channels on DIO subdevice
Staging: comedi: cb_pcidio: fix "section mismatch" error
Staging: comedi: jr3_pci: Initialize transf variable fully in jr3_pci_poll_subdevice().
Staging: comedi: Corrected type of a printk argument in resize_async_buffer().
Staging: p9auth: a few fixes
Staging: rtl8192e: Add #include <linux/vmalloc.h>
Staging: iio: Don't build on s390
Staging: winbond: implement prepare_multicast and fix API usage
Staging: w35und: Fix ->beacon_int breakage
Staging: remove cowloop driver
Staging: remove agnx driver
Staging: comedi: serial2002: fix include build issue
Linus Torvalds [Sun, 11 Oct 2009 18:23:33 +0000 (11:23 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (s3c-hwmon) Disable build for S3C64xx
MAINTAINERS: Fix Riku Voipio's address
hwmon: (asus_atk0110) Enable the EC
hwmon: (asus_atk0110) Refactor the code
hwmon: (sht15) Fix spurious section mismatch warning
Linus Torvalds [Sun, 11 Oct 2009 18:23:13 +0000 (11:23 -0700)]
Merge git://git./linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: fix file clone ioctl for bookend extents
Btrfs: fix uninit compiler warning in cow_file_range_nocow
Btrfs: constify dentry_operations
Btrfs: optimize back reference update during btrfs_drop_snapshot
Btrfs: remove negative dentry when deleting subvolumne
Btrfs: optimize fsync for the single writer case
Btrfs: async delalloc flushing under space pressure
Btrfs: release delalloc reservations on extent item insertion
Btrfs: delay clearing EXTENT_DELALLOC for compressed extents
Btrfs: cleanup extent_clear_unlock_delalloc flags
Btrfs: fix possible softlockup in the allocator
Btrfs: fix deadlock on async thread startup
Alexey Dobriyan [Wed, 7 Oct 2009 13:09:06 +0000 (17:09 +0400)]
headers: remove sched.h from interrupt.h
After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Linus Torvalds [Sun, 11 Oct 2009 18:12:33 +0000 (11:12 -0700)]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (34 commits)
[SCSI] qla2xxx: Fix NULL ptr deref bug in fail path during queue create
[SCSI] st: fix possible memory use after free after MTSETBLK ioctl
[SCSI] be2iscsi: Moving to pci_pools v3
[SCSI] libiscsi: iscsi_session_setup to allow for private space
[SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver
[SCSI] zfcp: Fix hang when offlining device with offline chpid
[SCSI] zfcp: Fix lockdep warning when offlining device with offline chpid
[SCSI] zfcp: Fix oops during shutdown of offline device
[SCSI] zfcp: Fix initial device and cfdc for delayed adapter allocation
[SCSI] zfcp: correctly initialize unchained requests
[SCSI] mpt2sas: Bump version 02.100.03.00
[SCSI] mpt2sas: Support dev remove when phy status is MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT
[SCSI] mpt2sas: Timeout occurred within the HANDSHAKE logic while waiting on firmware to ACK.
[SCSI] mpt2sas: Call init_completion on a per request basis.
[SCSI] mpt2sas: Target Reset will be issued from Interrupt context.
[SCSI] mpt2sas: Added SCSIIO, Internal and high priority memory pools to support multiple TM
[SCSI] mpt2sas: Copyright change to 2009.
[SCSI] mpt2sas: Added mpi2_history.txt for MPI2 headers.
[SCSI] mpt2sas: Update driver to MPI2 REV K headers.
[SCSI] bfa: Brocade BFA FC SCSI driver
...
Russell King [Sun, 11 Oct 2009 15:29:48 +0000 (16:29 +0100)]
ARM: Add kmap_atomic type debugging
Seemingly this support was missed when highmem was added, so
DEBUG_HIGHMEM wouldn't have checked the kmap_atomic type.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Johannes Weiner [Tue, 21 Jul 2009 15:08:28 +0000 (17:08 +0200)]
ARM: boolean bit testing
Bit testing (test, testset, testclear, testchange) for bit numbers
known at compile time returns a word with the tested-for bit set.
Change it to return a true boolean value so to make it consistent with
the out-of-line path and all the other bitops implementations.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 11 Oct 2009 14:25:05 +0000 (15:25 +0100)]
ARM: update die() output
Make die() better match x86:
- add printing of the last accessed sysfs file
- ensure console_verbose() is called under the lock
- ensure we panic outside of oops_exit()
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 11 Oct 2009 14:17:53 +0000 (15:17 +0100)]
ARM: Dump code/mem oops lines with the appropriate log level
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sun, 11 Oct 2009 14:03:11 +0000 (15:03 +0100)]
ARM: Dump memory and backtrace as one printk per line
dump_mem and dump_backtrace were both using multiple printk statements
to print each line. With DEBUG_LL enabled, this causes OOPS to become
very difficult to read. Solve this by only using one printk per line.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hartley Sweeten [Thu, 8 Oct 2009 22:44:41 +0000 (23:44 +0100)]
ARM: 5756/1: ep93xx: introduce clk parent
The clock generation system in the ep93xx uses two external oscillator's
and two internal PLLs to derive all the internal clocks. Many of these
internal clocks can be stopped to save power.
This introduces a "parent" hierarchy for the clocks so that the users
count can be correctly tracked for power management.
The "parent" for the video clock can either be one of the PLL outputs
or the external oscillator. In order to correctly track the "parent"
for the video clock calc_clk_div() needed to be modified. It now
returns an error code if the desired rate cannot be generated.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hartley Sweeten [Wed, 7 Oct 2009 23:45:00 +0000 (00:45 +0100)]
ARM: 5754/1: ep93xx: update i2c support
Update the ep93xx i2c support:
1) The platform init code passes the configuration data for the
i2c-gpio driver. This allows any gpio pin do be used for the
sda and scl pins. It also allows the platform to specify the
udelay and timeout.
2) Program the gpio configuration register to enable/disable the
open drain drivers. Note that this really only works if the
sda and scl pins are set to EP93XX_GPIO_LINE_EEDAT and
EP93XX_GPIO_LINE_EECLK.
3) Update the edb93xx.c platform init to use the new support.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Hartley Sweeten [Wed, 7 Oct 2009 22:43:26 +0000 (23:43 +0100)]
ARM: 5753/1: ep93xx: remove old EP93XX_GPIO_* defines
Most of the EP93XX_GPIO_*_INT_* register defines in ep93xx-regs.h
not required due to how the ep93xx core and gpiolib support handle
gpio interrupts. Remove the defines to prevent future confusion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Oliver Neukum [Wed, 7 Oct 2009 16:07:10 +0000 (18:07 +0200)]
USB: serial: no unnecessary GFP_ATOMIC in oti6858
GFP_ATOMIC without good cause is evil.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Wed, 7 Oct 2009 09:01:38 +0000 (11:01 +0200)]
USB: serial: fix race between unthrottle and completion handler in visor
usb:usbserial:visor: fix race between unthrottle and completion handler
visor_unthrottle() mustn't resubmit the URB unconditionally
as the URB may still be running.
the same bug as opticon.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Wed, 7 Oct 2009 08:50:23 +0000 (10:50 +0200)]
USB: serial: fix assumption that throttle/unthrottle cannot sleep
many serial subdrivers are clearly written as if throttle/unthrottle
cannot sleep. This leads to unneeded atomic submissions. This
patch converts affected drivers in a way to makes very clear that
throttle/unthrottle can sleep. Thus future misdesigns can be avoided
and efficiency and reliability improved.
This removes any such assumption using GFP_KERNEL and spin_lock_irq()
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Wed, 7 Oct 2009 07:30:49 +0000 (09:30 +0200)]
USB: serial: fix race between unthrottle and completion handler in symbolserial
usb:usbserial:symbolserial: fix race between unthrottle and completion handler
symbol_unthrottle() mustn't resubmit the URB unconditionally
as the URB may still be running.
the same bug as opticon.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Wed, 7 Oct 2009 07:25:10 +0000 (09:25 +0200)]
USB: serial: fix race between unthrottle and completion handler in opticon
usb:usbserial:opticon: fix race between unthrottle and completion handler
opticon_unthrottle() mustn't resubmit the URB unconditionally
as the URB may still be running.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Tue, 6 Oct 2009 20:45:59 +0000 (13:45 -0700)]
USB: ehci: Fix isoc scheduling boundary checking.
The EHCI driver does some bounds checking when it's scheduling an iTD for
an active endpoint. It sets the local variable start to
stream->next_uframe and moves that variable further in the schedule if
necessary. However, the driver fails to do anything with start before
jumping to the ready label and setting the URB's starting frame to
stream->next_uframe. Alan Stern confirms the EHCI driver should set
stream->next_uframe to start before jumping.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 6 Oct 2009 18:07:57 +0000 (14:07 -0400)]
USB: storage: When a device returns no sense data, call it a Hardware Error
This patch (as1294) fixes a problem that has plagued users for several
kernel releases. Some USB mass-storage devices don't return any sense
data when they encounter certain kinds of errors. The SCSI layer
interprets this to mean that the operation should be retried, and the
same thing happens -- over and over again with no limit. In some
circumstances (such as when a bus reset occurs) that is the right
thing to do, but not here.
The patch checks for this condition (a transport failure with no sense
data) and changes the result code to DID_ERROR and the sense code to
Hardware Error. This does get only a limited number of retries, and
so the command will fail relatively quickly instead of getting stuck
in an infinite loop.
This fixes a large part of Bugzilla #14118.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Mantas Mikulenas <grawity@gmail.com>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Thu, 1 Oct 2009 13:01:17 +0000 (15:01 +0200)]
USB: small fix in error case of suspend in generic usbserial code
usb:usbserial: fix flags in error case of suspension
suspended flag must be reset in error case
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Thu, 1 Oct 2009 12:54:46 +0000 (14:54 +0200)]
USB: visor: fix trivial accounting bug in visor driver
usb:usbserial:visor: fix accounting in error case
data not pushed to the tty layer due to an error mustn't be counted
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Joris van Rantwijk [Thu, 24 Sep 2009 18:20:20 +0000 (20:20 +0200)]
USB: Fix throttling in generic usbserial driver
The generic usbserial driver in Linux 2.6.31 halts its receiving
channel in response to throttle requests from the line discipline.
Unfortunately it drops the contents of the first URB received after
throttling takes effect. This patch corrects that problem.
Signed-off-by: Joris van Rantwijk <jorispubl@xs4all.nl>
Acked-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Éric Piel [Sun, 4 Oct 2009 11:45:07 +0000 (13:45 +0200)]
USB: cp210x: Add support for the DW700 UART
In the Dell inspiron mini 10, the GPS is connected via a cp2102. This patch
adds detection of this USB device. (I haven't managed to use the GPS under
Linux yet, though)
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Mon, 5 Oct 2009 19:53:58 +0000 (15:53 -0400)]
USB: ipaq: fix oops when device is plugged in
This patch (as1293) fixes a problem with the ipaq serial driver. It
tries to bind to all the interfaces, even those that don't have enough
endpoints. The symptom is an invalid memory reference and oops when
the device is plugged in.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: stable <stable@kernel.org>
Tested-by: Matthias Geissert <geissert@mathematik.tu-darmstadt.de>
Tested-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Frysinger [Wed, 7 Oct 2009 08:29:31 +0000 (04:29 -0400)]
USB: isp1362: fix build warnings on 64-bit systems
A bunch of places assumed pointers were 32-bits in size (bit checking and
debug output), but none of these affected runtime functionality.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tobias Klauser [Fri, 18 Sep 2009 07:14:46 +0000 (09:14 +0200)]
USB: gadget: imx_udc: Use resource size
Use the resource_size function instead of manually calculating the
resource size. This reduces the chance of introducing off-by-one errors.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sergey Pinaev [Thu, 17 Sep 2009 13:26:50 +0000 (17:26 +0400)]
USB: storage: iRiver P7 UNUSUAL_DEV patch
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Frysinger [Thu, 17 Sep 2009 01:10:53 +0000 (21:10 -0400)]
USB: musb: make HAVE_CLK support optional
The Blackfin port doesn't support HAVE_CLK and the musb driver works fine
with support stubbed out, so take the existing Blackfin clk stubs and move
them to common musb code so we can drop the Kconfig dependency.
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Fri, 18 Sep 2009 15:55:12 +0000 (08:55 -0700)]
USB: xhci: Fix dropping endpoints from the xHC schedule.
When an endpoint is to be dropped from the hardware bandwidth schedule, we
want to clear its add flag.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Wed, 16 Sep 2009 23:42:39 +0000 (16:42 -0700)]
USB: xhci: Don't wait for a disable slot cmd when HC dies.
When the host controller dies or is removed while a device is plugged in,
the USB core will attempt to deallocate the struct usb_device. That will
call into xhci_free_dev(). This function used to attempt to submit a
disable slot command to the host controller and clean up the device
structures when that command returned. Change xhci_free_dev() to skip the
command submission and just free the memory if the host controller died.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Tue, 29 Sep 2009 00:21:37 +0000 (17:21 -0700)]
USB: xhci: Handle canceled URBs when HC dies.
When the host controller dies (e.g. it is removed from a PCI card slot),
the xHCI driver cannot expect commands to complete. The buggy code this
patch fixes would mark an URB as canceled and then expect the URB to be
completed when the stop endpoint command completed. That would never
happen if the host controller was dead, so the USB core would just hang in
the disconnect code.
If the host controller died, and the driver asks to cancel an URB, free
any structures associated with that URB and immediately give it back.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Wed, 16 Sep 2009 23:42:30 +0000 (16:42 -0700)]
USB: xhci: Stop debugging polling loop when HC dies.
If the host controller card is removed from the system, stop the timer
function to debug the xHCI rings.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gergely Imreh [Tue, 15 Sep 2009 08:03:31 +0000 (16:03 +0800)]
USB: usbtmc: fix timeout increase
The current 10ms timeout is too short for some normal USBTMC device
operation, increase it to a value which was tested with previously
affected Tektronix oscilloscopes.
Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ronnie Furuskog [Mon, 21 Sep 2009 19:20:55 +0000 (21:20 +0200)]
USB: option: Patch for Huawei Mobile Broadband E270+ Modem
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Peter Magdina [Wed, 7 Oct 2009 14:22:17 +0000 (16:22 +0200)]
USB: option: Toshiba G450 device id
Signed-off-by: Peter Magdina <peter@magdina.sk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jiri Slaby [Wed, 23 Sep 2009 14:09:56 +0000 (16:09 +0200)]
USB: usblcd, fix memory leak
Stanse found a memory leak in lcd_probe. Instead of returning without
releasing the memory, jump to the error label which frees it.
http://stanse.fi.muni.cz/
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Elina Pasheva [Thu, 17 Sep 2009 22:26:20 +0000 (15:26 -0700)]
USB: serial: sierra driver version change to 1.3.8
Updated sierra driver version from 1.3.7 to 1.3.8 now that the autosuspend
capabilities were added to the driver.
Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 9 Oct 2009 16:43:12 +0000 (12:43 -0400)]
USB: serial: don't call release without attach
This patch (as1295) fixes a recently-added bug in the USB serial core.
If certain kinds of errors occur during probing, the core may call a
serial driver's release method without previously calling the attach
method. This causes some drivers (io_ti in particular) to perform an
invalid memory access.
The patch adds a new flag to keep track of whether or not attach has
been called.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
CC: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johan Hovold [Tue, 29 Sep 2009 10:39:23 +0000 (12:39 +0200)]
USB: digi_acceleport: Fix broken unthrottle.
This patch fixes a regression introduced in
39892da44b21b5362eb848ca424d73a25ccc488f.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johan Hovold [Thu, 8 Oct 2009 09:36:46 +0000 (11:36 +0200)]
USB: pl2303: fix error characters not being reported to ldisc
Fix regression introduced by commit
d4fc4a7bfc2dee626f4fec1e209e58eaa4312de6 (tty: Fix the PL2303 private
methods for sysrq).
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johan Hovold [Wed, 7 Oct 2009 18:05:07 +0000 (20:05 +0200)]
USB: ftdi_sio: re-implement read processing
- Re-structure read processing.
- Kill obsolete work queue and always push to tty in completion handler.
- Use tty_insert_flip_string instead of per character push when
possible.
- Fix stalled-read regression in 2.6.31 by using urb status to
determine when port is closed rather than port count.
- Fix race with open/close by checking ASYNCB_INITIALIZED in
unthrottle.
- Kill private rx_flag and lock and use throttle flags in
usb_serial_port instead.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johan Hovold [Wed, 7 Oct 2009 18:05:06 +0000 (20:05 +0200)]
USB: ftdi_sio: clean up read completion handler
Remove superfluous error checks in completion handler:
- No need to check private data and urb pointers as we check urb-status
before dereferencing priv (which is not freed until urb has been killed
on close).
- No need to check tty as it is checked again when processing.
- No need to check urb->number_of_packets on bulk urb.
Note that both private data and tty are checked again before processing
(possibly from work queue which also is cancelled on close).
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johan Hovold [Wed, 7 Oct 2009 18:05:05 +0000 (20:05 +0200)]
USB: ftdi_sio: remove unused rx_byte counter
Remove unused rx_byte counter which is never exposed as noted by Alan
Cox.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johan Hovold [Wed, 7 Oct 2009 18:05:04 +0000 (20:05 +0200)]
USB: ftdi_sio: remove tty->low_latency
Fixes tty_flip_buffer_push being called from hard interrupt context with
low_latency set.
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 8 Oct 2009 17:26:11 +0000 (10:26 -0700)]
Staging: comedi: fix build on arches that don't want comedi drivers
This should fix the problem of comedi drivers showing up on arches that
can not support the comedi subsystem (like s390).
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Frank Mori Hess [Tue, 22 Sep 2009 20:32:55 +0000 (16:32 -0400)]
Staging: comedi: pcmcia irq fixes
Replaced IRQ_TYPE_EXCLUSIVE with IRQ_TYPE_DYNAMIC_SHARING for pcmcia
drivers.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Frank Mori Hess [Mon, 21 Sep 2009 20:10:21 +0000 (16:10 -0400)]
Staging: comedi: ni_pcimio: Added device id for pxi-6225.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 20:05:01 +0000 (16:05 -0400)]
Staging: comedi: ni_65xx.c: fix output inversion problem.
When reading DO subdevice with inverted outputs invert the values read
back from the ports to match the inversion of values written.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 20:01:56 +0000 (16:01 -0400)]
Staging: comedi: ni_65xx.c: fix insn_bits shift calculation.
Fix insn_bits bitshift calculation for subdevice with non-zero
base_port.
Thanks to cJ-comedi at zougloub dot eu for spotting the bug.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 19:48:33 +0000 (15:48 -0400)]
Staging: comedi: s526: fixes for pulse generator
Some changes and corrections to handling of
INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR, and
INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR, so they interpret insn->data[]
as per the comments in the code.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 19:38:34 +0000 (15:38 -0400)]
Staging: comedi: s526: Take account of arch's byte order.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 19:35:42 +0000 (15:35 -0400)]
Staging: comedi: s526: Get rid of global variable 'cmReg'.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 19:29:59 +0000 (15:29 -0400)]
Staging: comedi: s526: Fix number of channels on DIO subdevice
Correct operation of INSN_CONFIG_DIO_INPUT and INSN_CONFIG_DIO_OUTPUT
and support INSN_CONFIG_DIO_QUERY. Thanks to Alessio Margan for some
testing.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 19:23:32 +0000 (15:23 -0400)]
Staging: comedi: cb_pcidio: fix "section mismatch" error
Store PCI device IDs in the board info and use this for matching IDs in
the code instead of using the module device table.
This avoids a "section mismatch" error.
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 19:12:32 +0000 (15:12 -0400)]
Staging: comedi: jr3_pci: Initialize transf variable fully in jr3_pci_poll_subdevice().
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ian Abbott [Mon, 21 Sep 2009 18:55:23 +0000 (14:55 -0400)]
Staging: comedi: Corrected type of a printk argument in resize_async_buffer().
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Serge E. Hallyn [Wed, 16 Sep 2009 21:27:41 +0000 (16:27 -0500)]
Staging: p9auth: a few fixes
1. The memory into which we copy 'u1@u2' needs space for u1, @,
u2, and a final \0 which strcat copies in.
2. Strsep changes the value of its first argument. So use a
temporary variable to pass to it, so we pass the original
value to kfree!
3. Allocate an extra char to user_buf, because we need a trailing \0
since we later kstrdup it.
I am about to send out an LTP testcase for this driver, but
in addition the correctness of the hashing can be verified as
follows:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
char in[41], out[20];
unsigned int v;
int i, ret;
ret = read(STDIN_FILENO, in, 40);
if (ret != 40)
exit(1);
in[40] = '\0';
for (i = 0; i < 20; i++) {
sscanf(&in[2*i], "%02x", &v);
out[i] = v;
}
write(STDOUT_FILENO, out, 20);
}
as root, to test userid 501 switching to uid 0, choosing
'random' string 'ab':
echo -n "501@0" > plain
openssl sha1 -hmac 'ab' plain |awk '{ print $2 '} > dgst
./unhex < dgst > dgst.u
mknod /dev/caphash 504 0
mknod /dev/capuse 504 1
chmod ugo+w /dev/capuse
cat dgst.u > /dev/caphash
as uid 501,
echo "501@0@ab" > /dev/capuse
id -u # should now show 0.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Mahoney [Thu, 8 Oct 2009 21:30:40 +0000 (17:30 -0400)]
Staging: rtl8192e: Add #include <linux/vmalloc.h>
This driver uses vmalloc but for whatever reason vmalloc.h isn't included
on ppc.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Mahoney [Thu, 8 Oct 2009 21:32:42 +0000 (17:32 -0400)]
Staging: iio: Don't build on s390
The IIO core expects request_irq to work, which doesn't appear to exist
on s390.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeff Mahoney [Thu, 8 Oct 2009 21:27:51 +0000 (17:27 -0400)]
Staging: winbond: implement prepare_multicast and fix API usage
This patch adds a prepare_multicast callback for the winbond driver
to properly receive mc_count in ->configure_filter.
This also fixes incompatible pointer assignment build errors because
->configure_filter had changed.
This is build tested only, but that's more than the original code received.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pekka Enberg [Mon, 21 Sep 2009 09:52:15 +0000 (12:52 +0300)]
Staging: w35und: Fix ->beacon_int breakage
Commit
f424afa17899408cbd267a4c4534ca6fc9d8f71c ("mac80211: remove
deprecated API") removed ->beacon_int from struct ieee80211_conf. Fix
breakage in w35und by setting beacon period in ->add_interface to
bss_conf.beacon_int.
Cc: Jiri Benc <jbenc@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sandro Bonazzola <sandro.bonazzola@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 8 Oct 2009 18:32:31 +0000 (11:32 -0700)]
Staging: remove cowloop driver
The author has found a number of problems with the current version
of this driver in the current kernel, and is reworking it to get
things working again. Because of that, it would be better to remove
the driver now and add it back in a future kernel release.
Cc: H.J. Thomassen <hjt@ATComputing.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Sat, 19 Sep 2009 17:50:02 +0000 (10:50 -0700)]
Staging: remove agnx driver
The agnx driver in the staging tree is broken, does not work, and
development is dead. The developers have asked for it to be removed
so it now is.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Mon, 5 Oct 2009 20:23:31 +0000 (13:23 -0700)]
Staging: comedi: serial2002: fix include build issue
Now that sched.h was removed from poll.h, serial2002.c needs
to include it otherwise it does not build properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Fri, 9 Oct 2009 20:40:22 +0000 (13:40 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
RDMA/addr: Fix resolution of local IPv6 addresses
RDMA/cxgb3: Handle NULL inetdev pointer in iwch_query_port()
mlx4_core: Add 40GigE device ID
RDMA/iwcm: Don't call provider reject func with irqs disabled
IB: Fix typo in udev rule documentation
Ralf Baechle [Fri, 9 Oct 2009 10:41:30 +0000 (12:41 +0200)]
IRQ: Change __softirq_pending to unsigned int in asm-generic/hardirq.h.
Since the beginnings in
aafe4dbed0bf6cbdb2e9f03e1d42f8a540d8541d
("asm-generic: add generic versions of common headers") the generic
version of <asm/hardirq.h> defined __softirq_pending as unsigned long.
Which is different from other architectures for no apparent good reason
and was causing the following warning:
kernel/time/tick-sched.c: In function 'tick_nohz_stop_sched_tick':
kernel/time/tick-sched.c:261: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'
Reported and initial patch by Wu Zhangjin <wuzhangjin@gmail.com>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[ Arnd points out that we really should make sure parisc and alpha are
ok with this, since they have also been converted to use the generic
hardirq.h file. But neither seems to use it, although parisc does
build a IRQSTAT_SIRQ_PEND #define into asm-offsets - but that also
appears unused.. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 9 Oct 2009 20:32:24 +0000 (13:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - print debug data when testing AUX IRQ delivery
Input: libps2 - fix dependancy on i8042
Input: fix rx51 board keymap
Input: ad7879 - pass up error codes from probe functions
Input: xpad - add BigBen Interactive XBOX 360 Controller
Input: rotary_encoder - fix relative axis support
Input: sparkspkr - move remove() functions to .devexit.text
Input: wistron_btns - add DMI entry for Medion WIM2030 laptop
Linus Torvalds [Fri, 9 Oct 2009 20:31:47 +0000 (13:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
Blackfin: convert to GENERIC_HARDIRQS_NO__DO_IRQ
Blackfin: drop all simple-gpio board resources
Blackfin: fix framebuffer mmap bug for nommu
Blackfin: includecheck fix: mach-bf548, ezkit.c
Blackfin: drop cs_change_per_word setting
Blackfin: bf533-ezkit: convert to physmap/jedec_probe
Blackfin: convert adv7393 resources to new i2c framework
Blackfin: fix missed cache config renames
Blackfin: cplbinfo: drop d_path() hacks
Blackfin: asm/irq.h: pull in mach/anomaly.h for anomaly defines
Blackfin: BF51x: add PTP MMR defines
Blackfin: mass clean up of copyright/licensing info
Blackfin: convert to use arch_gettimeoffset()
Linus Torvalds [Fri, 9 Oct 2009 20:30:50 +0000 (13:30 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
TPM: fix pcrread
Linus Torvalds [Fri, 9 Oct 2009 20:30:14 +0000 (13:30 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
ima: ecryptfs fix imbalance message
eCryptfs: Remove Kconfig NET dependency and select MD5
ecryptfs: depends on CRYPTO
Linus Torvalds [Fri, 9 Oct 2009 20:29:42 +0000 (13:29 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: stop calling filemap_fdatawait inside ->fsync
fix readahead calculations in xfs_dir2_leaf_getdents()
xfs: make sure xfs_sync_fsdata covers the log
xfs: mark inodes dirty before issuing I/O
xfs: cleanup ->sync_fs
xfs: fix xfs_quiesce_data
xfs: implement ->dirty_inode to fix timestamp handling
Catalin Marinas [Fri, 9 Oct 2009 09:30:34 +0000 (10:30 +0100)]
kmemleak: Check for NULL pointer returned by create_object()
This patch adds NULL pointer checking in the early_alloc() function.
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Fri, 9 Oct 2009 09:39:24 +0000 (10:39 +0100)]
kmemleak: Use GFP_ATOMIC for early_alloc().
We can't use GFP_KERNEL inside rcu_read_lock().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Fri, 9 Oct 2009 18:35:21 +0000 (20:35 +0200)]
hwmon: (s3c-hwmon) Disable build for S3C64xx
The s3c-hwmon driver depends on the arch/arm implementation of the core
ADC support for the chip. Since the S3C64xx version has not yet been
merged disable building of the driver on S3C64xx for now.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Fri, 9 Oct 2009 18:35:19 +0000 (20:35 +0200)]
MAINTAINERS: Fix Riku Voipio's address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Riku Voipio <riku.voipio@iki.fi>
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / log