Kim Phillips [Wed, 16 Jan 2013 14:00:11 +0000 (14:00 +0000)]
common/fdt_support.c: sparse fixes
trivial:
fdt_support.c:89:64: warning: Using plain integer as NULL pointer
fdt_support.c:325:65: warning: Using plain integer as NULL pointer
fdt_support.c:352:65: warning: Using plain integer as NULL pointer
For the following bad constant expression, We hardcode the max. number of
memory banks to four for the foreseeable future, and add an error with
instructions on what to do once it's exceeded:
fdt_support.c:397:22: error: bad constant expression
For the rest below, sparse found a couple of wrong endian conversions
in of_bus_default_translate() and fdt_get_base_address(), but
otherwise the rest is mostly annotation fixes:
fdt_support.c:64:24: warning: cast to restricted __be32
fdt_support.c:192:21: warning: incorrect type in assignment (different base types)
fdt_support.c:192:21: expected unsigned int [unsigned] [usertype] tmp
fdt_support.c:192:21: got restricted __be32 [usertype] <noident>
fdt_support.c:201:21: warning: incorrect type in assignment (different base types)
fdt_support.c:201:21: expected unsigned int [unsigned] [addressable] [usertype] tmp
fdt_support.c:201:21: got restricted __be32 [usertype] <noident>
fdt_support.c:304:13: warning: incorrect type in assignment (different base types)
fdt_support.c:304:13: expected unsigned int [unsigned] [usertype] val
fdt_support.c:304:13: got restricted __be32 [usertype] <noident>
fdt_support.c:333:13: warning: incorrect type in assignment (different base types)
fdt_support.c:333:13: expected unsigned int [unsigned] [usertype] val
fdt_support.c:333:13: got restricted __be32 [usertype] <noident>
fdt_support.c:359:13: warning: incorrect type in assignment (different base types)
fdt_support.c:359:13: expected unsigned int [unsigned] [usertype] val
fdt_support.c:359:13: got restricted __be32 [usertype] <noident>
fdt_support.c:373:21: warning: cast to restricted __be32
fdt_support.c:963:48: warning: incorrect type in argument 1 (different base types)
fdt_support.c:963:48: expected restricted __be32 const [usertype] *p
fdt_support.c:963:48: got unsigned int [usertype] *<noident>
fdt_support.c:971:48: warning: incorrect type in argument 1 (different base types)
fdt_support.c:971:48: expected restricted __be32 const [usertype] *p
fdt_support.c:971:48: got unsigned int [usertype] *<noident>
fdt_support.c:984:29: warning: incorrect type in argument 1 (different base types)
fdt_support.c:984:29: expected restricted __be32 const [usertype] *cell
fdt_support.c:984:29: got unsigned int [usertype] *addr
fdt_support.c:996:32: warning: incorrect type in argument 1 (different base types)
fdt_support.c:996:32: expected restricted __be32 const [usertype] *cell
fdt_support.c:996:32: got unsigned int [usertype] *addr
fdt_support.c:1041:41: warning: incorrect type in argument 1 (different base types)
fdt_support.c:1041:41: expected restricted __be32 const [usertype] *cell
fdt_support.c:1041:41: got unsigned int [usertype] *addr
fdt_support.c:1053:41: warning: incorrect type in argument 2 (different base types)
fdt_support.c:1053:41: expected restricted __be32 const [usertype] *range
fdt_support.c:1053:41: got unsigned int const [usertype] *[assigned] ranges
fdt_support.c:1064:53: warning: incorrect type in argument 2 (different base types)
fdt_support.c:1064:53: expected restricted __be32 const [usertype] *addr
fdt_support.c:1064:53: got unsigned int [usertype] *addr
fdt_support.c:1110:50: warning: incorrect type in argument 2 (different base types)
fdt_support.c:1110:50: expected restricted __be32 const [usertype] *addr
fdt_support.c:1110:50: got unsigned int *<noident>
fdt_support.c:1121:49: warning: incorrect type in argument 1 (different base types)
fdt_support.c:1121:49: expected restricted __be32 const [usertype] *cell
fdt_support.c:1121:49: got unsigned int *<noident>
fdt_support.c:1147:60: warning: incorrect type in argument 2 (different base types)
fdt_support.c:1147:60: expected restricted __be32 const [usertype] *addr
fdt_support.c:1147:60: got unsigned int *<noident>
fdt_support.c:1081:5: warning: symbol '__of_translate_address' was not declared. Should it be static?
fdt_support.c:1154:5: error: symbol 'fdt_translate_address' redeclared with different type (originally declared at include/fdt_support.h:95) - incompatible argument 3 (different base types)
fdt_support.c: In function 'fdt_node_offset_by_compat_reg':
fdt_support.c:1173:17: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
See also linux kernel commit
0131d897 "of/address: use proper
endianess in get_flags".
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
Kim Phillips [Wed, 16 Jan 2013 13:59:50 +0000 (13:59 +0000)]
libfdt: update from upstream dtc commit 142419e
commit 142419e "dtc/libfdt: sparse fixes", for u-boot's libfdt copy.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
Kim Phillips [Wed, 16 Jan 2013 13:59:43 +0000 (13:59 +0000)]
libfdt: update fdt.h from upstream dtc
upstream dtc commit
feafcd972cb744750a65728440c99526e6199a6d
"dtc/libfdt: introduce fdt types for annotation by endian checkers".
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
Kim Phillips [Wed, 16 Jan 2013 13:59:34 +0000 (13:59 +0000)]
libfdt_env.h: add fdt type definitions
fdt types are big endian.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
Kim Phillips [Wed, 16 Jan 2013 13:59:04 +0000 (13:59 +0000)]
treewide: include libfdt_env.h before fdt.h
and, if including libfdt.h which includes libfdt_env.h in
the correct order, don't include fdt.h before libfdt.h.
this is needed to get the fdt type definitions set from
the project environment before fdt.h uses them.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Jerry Van Baren <gvb.uboot@gmail.com>
Allen Martin [Tue, 8 Jan 2013 16:07:54 +0000 (16:07 +0000)]
fdt: fix dts preprocessor options
Using "-ansi" preprocessor option will cause dts lines that begin with
'#' to choke the preprocessor. Change to "-x assembler-with-cpp"
instead which is what the kernel uses to preprocess dts files.
Signed-off-by: Allen Martin <amartin@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Jagannadha Sutradharudu Teki [Tue, 29 Jan 2013 11:43:38 +0000 (17:13 +0530)]
sf: stmicro: Add support for N25Q256A
Add support for Numonyx N25Q256A SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Jagannadha Sutradharudu Teki [Tue, 29 Jan 2013 11:43:37 +0000 (17:13 +0530)]
sf: stmicro: Add support for N25Q32A
Add support for Numonyx N25Q32A SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Jagannadha Sutradharudu Teki [Tue, 29 Jan 2013 11:43:36 +0000 (17:13 +0530)]
sf: stmicro: Add support for N25Q32
Add support for Numonyx N25Q32 SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Jagannadha Sutradharudu Teki [Wed, 23 Jan 2013 12:51:45 +0000 (18:21 +0530)]
sf: stmicro: Add support for N25Q64A
Add support for Numonyx N25Q64A SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Jagannadha Sutradharudu Teki [Wed, 23 Jan 2013 12:29:29 +0000 (13:29 +0100)]
sf: winbond: Add W25Q64W
Add support for Winbond's W25Q64W SPI flash.
This device is used on xilinx zynq emulation platform.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Jagannadha Sutradharudu Teki [Fri, 14 Sep 2012 15:16:11 +0000 (20:46 +0530)]
sf: spansion: Correct the first byte of idcode1 for S25FL256S part
This patch corrected the first byte of idcode1 for S25FL256S SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tom Rini [Mon, 4 Feb 2013 22:50:11 +0000 (17:50 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-x86
Tom Rini [Mon, 4 Feb 2013 14:07:34 +0000 (09:07 -0500)]
Merge branch 'master' of git://denx.de/git/u-boot-microblaze
Michal Simek [Tue, 22 Jan 2013 23:40:07 +0000 (23:40 +0000)]
serial: arm_dcc: Fix compilation warning and remove unneeded initialization
- arm_dcc_dev is already initialized.
- Remove unused rc variable
Warning log:
arm_dcc.c: In function 'drv_arm_dcc_init':
arm_dcc.c:145:6: warning: unused variable 'rc' [-Wunused-variable]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Marek Vasut <marex@denx.de>
Michal Simek [Tue, 22 Jan 2013 23:40:06 +0000 (23:40 +0000)]
serial: arm_dcc: Remove CONFIG_ARM_DCC_MULTI option
CONFIG_ARM_DCC_MULTI should be also removed in the patch
"serial: Remove CONFIG_SERIAL_MULTI from serial drivers"
(sha1:
a3827250606895ec2dd4b8d867342b7cabf3692f)
Because the driver defines serial_* functions
which cause conflict with serial.c (multiple definition of serial_*)
Removing CONFIG_SERIAL_MULTI function also require to define
default_serial_console for cases where another serial driver
is not available in the system.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Marek Vasut <marex@denx.de>
Jagannadha Sutradharudu Teki [Wed, 12 Dec 2012 04:48:56 +0000 (04:48 +0000)]
sf: stmicro: add support for N25Q064
Add support for Numonyx N25Q064 SPI flash.
Signed-off-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Richard Genoud [Mon, 3 Dec 2012 06:28:28 +0000 (06:28 +0000)]
cmd_time: merge run_command_and_time_it with cmd_process
As far as every arch has a get_timer function,
run_command_and_time_it code can now disappear.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-By: Che-Liang Chiou <clchiou@chromium.org>
[trini: s/ulong/unsigned long/ in command.h portion]
Signed-off-by: Tom Rini <trini@ti.com>
Jim Lin [Thu, 24 Jan 2013 01:05:55 +0000 (01:05 +0000)]
console: USB: KBD: Fix incorrect autoboot timeout
Autoboot timeout defined by CONFIG_BOOTDELAY will not be accurate if
CONFIG_USB_KEYBOARD and CONFIG_SYS_USB_EVENT_POLL are defined in
configuration file and when tstc() function for checking key pressed
takes longer time than 10 ms (e.g., 50 ms) to finish.
Signed-off-by: Jim Lin <jilin@nvidia.com>
Jeroen Hofstee [Tue, 8 Jan 2013 13:35:53 +0000 (13:35 +0000)]
board sc3: fix warning about nested comment
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
Fabio Estevam [Tue, 8 Jan 2013 05:36:11 +0000 (05:36 +0000)]
common: env_mmc: Use __weak annotation to simplify code
Using the __weak annotation can make the code cleaner.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Gabor Juhos [Sun, 6 Jan 2013 23:04:25 +0000 (23:04 +0000)]
common/cmd_bootm.c: prevent running of subcommands before 'bootm start'
The execution order of the bootm subcommands is fixed.
Although here is a sanity check in the state machine
which should prevent running the subcommands in wrong
order but it does not catch all possible errors.
It is possible to run any subcommand without running
'bootm start' first which leads to unexpected behaviour.
For example, running 'bootm loados' without 'bootm start'
causes a hang:
U-Boot> bootm loados
XIP Invalid Image ... OK
OK
Add a sanity check to 'do_bootm_subcommand' in order
to ensure that no subcommands can be executed before
'bootm start'.
After the patch running of any subcommand without running
'bootm start' will cause an error like this:
U-Boot> bootm loados
Trying to execute a command out of order
bootm - boot application image from memory
Usage:
bootm [addr [arg ...]]
- boot application image stored in memory
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Alexey Brodkin [Thu, 3 Jan 2013 01:02:46 +0000 (01:02 +0000)]
drivers/block/systemace - fixed data type in "systemace_read" to match prototype in "block_dev_desc_t"
Currently we have "unsigned long blkcnt" which is fine with
CONFIG_SYS_64BIT_LBA undefined because "lbaint_t" is basically the same
"unsigned long".
If CONFIG_SYS_64BIT_LBA gets defined "lbaint_t" is defined as "unsigned
long long".
Even though not many embedded systems have CONFIG_SYS_64BIT_LBA defined
it's good to have types in function implementation that match exactly
with prototypes.
Signed-off-by: Alexey Brodkin <alexey.brodkin@gmail.com>
Richard Genoud [Thu, 13 Dec 2012 03:30:10 +0000 (03:30 +0000)]
FAT: remove ifdefs to make the code more readable
ifdefs in the code are making it harder to read.
The use of simple if(vfat_enabled) makes no more code and is cleaner.
(the code is discarded by the compiler instead of the preprocessor.)
NB: if -O0 is used, the code won't be discarded
and bonus, now the code compiles even if CONFIG_SUPPORT_VFAT is not
defined.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Richard Genoud [Thu, 13 Dec 2012 00:47:36 +0000 (00:47 +0000)]
FAT: use toupper/tolower instead of recoding them
toupper/tolower function are already declared, so use them.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Ashok [Wed, 7 Nov 2012 07:39:29 +0000 (07:39 +0000)]
configs:Remove unused macro CONFIG_DISCOVER_PHY
Remove unused macro CONFIG_DISCOVER_PHY from configs.
Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Simon Glass [Thu, 13 Dec 2012 20:49:27 +0000 (20:49 +0000)]
x86: Use generic global_data
Move x86 over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:26 +0000 (20:49 +0000)]
sparc: Use generic global_data
Move sparc over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:25 +0000 (20:49 +0000)]
sh: Use generic global_data
Move sh over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:24 +0000 (20:49 +0000)]
sandbox: Use generic global_data
Move sandbox over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:23 +0000 (20:49 +0000)]
powerpc: Use generic global_data
Move powerpc over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:22 +0000 (20:49 +0000)]
openrisc: Use generic global_data
Move openrisc over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:21 +0000 (20:49 +0000)]
nios2: Use generic global_data
Move nios2 over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
Simon Glass [Thu, 13 Dec 2012 20:49:20 +0000 (20:49 +0000)]
nds32: Use generic global_data
Move nds32 over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:19 +0000 (20:49 +0000)]
mips: Use generic global_data
Move mips over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:18 +0000 (20:49 +0000)]
microblaze: Use generic global_data
Move microblaze over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Simon Glass [Thu, 13 Dec 2012 20:49:17 +0000 (20:49 +0000)]
m68k: Use generic global_data
Move m68k over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:16 +0000 (20:49 +0000)]
blackfin: Use generic global_data
Move blackfin over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:15 +0000 (20:49 +0000)]
avr32: Use generic global_data
Move avr32 over to use generic global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:14 +0000 (20:49 +0000)]
arm: Use generic global_data
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:13 +0000 (20:49 +0000)]
Only use fb_base if we have a display
The ideal of having a frame buffer when there isn't a display is not
that useful. Change the bdinfo command to expect this only when we
have an lcd or video display.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:12 +0000 (20:49 +0000)]
Add generic global_data
Add a generic global_data structure which all archs will eventually
use.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:11 +0000 (20:49 +0000)]
sandbox: Move ram_buf to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:10 +0000 (20:49 +0000)]
avr32: Move cpu_hz to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:09 +0000 (20:49 +0000)]
avr32: Move stack_end to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:08 +0000 (20:49 +0000)]
mips: Move per_clk and dev_clk to arch_global_data
Move these field into arch_global_data and tidy up. The other
CONFIG_JZSOC fields are used by various architectures, so just remove
the #ifdef bracketing for these.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:07 +0000 (20:49 +0000)]
m68k: Move CONFIG_EXTRA_CLOCK to arch_global_data
Move inp_clk, vco_clk and flb_clk into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:06 +0000 (20:49 +0000)]
sparc: Drop kbd_status and reset_status from global_data
These fields is not used on sparc, so punt them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:05 +0000 (20:49 +0000)]
ppc: arm: Move sdhc_clk into arch_global_data
This is used by both powerpc and arm, but I think it still qualifies as
architecture-specific.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:04 +0000 (20:49 +0000)]
ppc: Move kbd_status to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:03 +0000 (20:49 +0000)]
ppc: Move wdt_last to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:02 +0000 (20:49 +0000)]
ppc: Move fpga_state to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:01 +0000 (20:49 +0000)]
ppc: Remove console_addr from global data
This does not appear to be used, so punt it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:49:00 +0000 (20:49 +0000)]
ppc: Move mirror_hack to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:59 +0000 (20:48 +0000)]
arm: Move uart_clk to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:58 +0000 (20:48 +0000)]
ppc: Move dp_alloc_base, dp_alloc_top to arch_global_data
Move these fields into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:57 +0000 (20:48 +0000)]
ppc: Move arbiter fields to arch_global_data
Move arbiter_event_attributes and arbiter_event_address into
arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:56 +0000 (20:48 +0000)]
ppc: Move reset_status to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:55 +0000 (20:48 +0000)]
ppc: Move mpc8220 clocks to arch_global_data
Move these fields into arch_global_data and tidy up. The bExtUart field
does not appear to be used, so punt it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:54 +0000 (20:48 +0000)]
ppc: Move mpc512x clocks to arch_global_data
Move ips_clk and csb_clk into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:53 +0000 (20:48 +0000)]
ppc: Move mpc5xxx clocks to arch_global_data
Move ipb_clk and pci_clk into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:52 +0000 (20:48 +0000)]
ppc: Move used_tlb_cams to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:51 +0000 (20:48 +0000)]
ppc: Move used_laws to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:50 +0000 (20:48 +0000)]
ppc: Move CONFIG_QE to arch_global_data
Move the quantative easing fields into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:49 +0000 (20:48 +0000)]
ppc: m68k: Move i2c1_clk, i2c2_clk to arch_global_data
Move these fields into arch_global_data and tidy up. This is needed for
both ppc and m68k since they share the i2c driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:48 +0000 (20:48 +0000)]
ppc: Move lbc_clk and cpu to arch_global_data
Move these fields into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Update for bsc9132qds.c, b4860qds.c]
Signed-off-by: Tom Rini <trini@ti.com>
Michal Simek [Wed, 23 Jan 2013 13:18:25 +0000 (14:18 +0100)]
microblaze: Remove FSL support from generic board
This code was targetting one specific Microblaze platform
configuration which is obsolete and fsl bus isn't used
in this way.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 23 Jan 2013 13:15:35 +0000 (14:15 +0100)]
common: cmd_bdinfo: Fix compilation warning for microblaze
Fix one printf compilation warning in microblaze bdinfo part.
Warning log:
cmd_bdinfo.c: In function 'do_bdinfo':
cmd_bdinfo.c:219:2: warning: format '%u' expects argument of type
'unsigned int', but argument 2 has type 'long unsigned int' [-Wformat]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 23 Jan 2013 13:11:50 +0000 (14:11 +0100)]
board: xilinx: Remove common folder
All these files was used for ancient xilinx drivers
which are finally gone.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Rommel Custodio <sessyargc@gmail.com>
Michal Simek [Wed, 23 Jan 2013 13:09:35 +0000 (14:09 +0100)]
board: xilinx: Remove unused ancient i2c driver
There is new driver in the driver folder.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Rommel Custodio <sessyargc@gmail.com>
Acked-by: Heiko Schocher <hs@denx.de>
Jason Wu [Fri, 23 Nov 2012 05:05:08 +0000 (15:05 +1000)]
spi: xilinx_spi: Perform software reset during slave setup
to make sure it is in the clear state.
Signed-off-by: Jason Wu <huanyu@xilinx.com>
Michal Simek [Wed, 23 Jan 2013 11:21:18 +0000 (12:21 +0100)]
common: cmd_bdinfo: Fix bdinfo to show all MACs for Microblaze and ARM
- Show all ethernet MACs in the system.
- Show current ethernet device
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
David Holsgrove [Tue, 6 Nov 2012 13:01:24 +0000 (23:01 +1000)]
microblaze: Add muldi3.c which contains routines for _muldi3
Referenced arch/blackfin/lib/muldi3.c and the linux kernel.
Resolves issue seen when building u-boot for HW_MUL=0;
PLATFORM_CPPFLAGS += -mxl-soft-mul
PLATFORM_CPPFLAGS += -mno-xl-multiply-high
which resulted in error while linking to libgcc.a without mul hw (bs / m);
libgcc.a(_muldi3.o): In function `__muldi3':
.... src/gcc-4.6.2/libgcc/libgcc2.c:550: undefined reference to `_GLOBAL_OFFSET_TABLE_'
This link failure would not occur if we used gcc instead of ld directly, as
gcc will correctly use the crt's to resolve this link.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Alexey Brodkin [Thu, 3 Jan 2013 09:35:23 +0000 (13:35 +0400)]
block: systemace: Added missing "else" in "ace_writew"
System ACE compact flash controller supports either 8-bit (default) or
16-bit data transfers. And in corresponding driver we need to implement
read/write of 16-bit data words properly for both modes of operation.
In existing code if width==8 both branches get executed which may cause
unexpected behavior of SystemAce controller.
Addition of "else" fixes described issue and execution is done as
expected for both (8-bit and 16-bit) data bus widths.
Signed-off-by: Alexey Brodkin <alexey.brodkin@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Simon Glass [Thu, 13 Dec 2012 20:48:47 +0000 (20:48 +0000)]
ppc: Move mpc83xx clock fields to arch_global_data
Move al mpc83xx fields into arch_global_data and tidy up. Also indent
the nested #ifdef for clarity.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:46 +0000 (20:48 +0000)]
ppc: Move clock fields to arch_global_data
Move vco_out, cpm_clk, scc_clk, brg_clk into arch_global_data and tidy
up. Leave pci_clk on its own since this should really depend only on
CONFIG_PCI and not any particular chip type.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:45 +0000 (20:48 +0000)]
ppc: Remove extra pci_clk fields from global_data
PPC has several of these fields, selected by chip type, although only one
is ever compiled in.
Instead, use a single field. It would be nice if this could be selected
by CONFIG_PCI, but some chips (e.g. mpc5xxx) use pci_clk even when
CONFIG_PCI is not enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:44 +0000 (20:48 +0000)]
ppc: Move brg_clk to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:43 +0000 (20:48 +0000)]
x86: Remove reset_status, relocoff from global_data
These fields are not used on x86, so punt them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:41 +0000 (20:48 +0000)]
x86: Move gd_addr into arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Add arch/x86/cpu/cpu.c changes after Graeme's comments]
Signed-off-by: Tom Rini <trini@ti.com>
Simon Glass [Thu, 13 Dec 2012 20:48:42 +0000 (20:48 +0000)]
x86: Set up the global data pointer in C instead of asm
We currently assume that the global data pointer is at the start of
struct global_data. We want to remove this restriction, and it is
easiest to do this in C.
Remove the asm code and add equivalent code in C.
This idea was proposed by Graeme Russ here:
http://patchwork.ozlabs.org/patch/199741/
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Apply Graeme Russ' comments
http://patchwork.ozlabs.org/patch/206305/ here, re-order]
Signed-off-by: Tom Rini <trini@ti.com>
Simon Glass [Thu, 13 Dec 2012 20:48:40 +0000 (20:48 +0000)]
x86: Remove gdt_addr from arch_global_data
Remove this unused field.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:39 +0000 (20:48 +0000)]
arm: Move tlb_addr and tlb_size to arch_global_data
Move these fields into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Address tlb_size in this patch as well]
Signed-off-by: Tom Rini <trini@ti.com>
Simon Glass [Thu, 13 Dec 2012 20:48:38 +0000 (20:48 +0000)]
nds32: Drop tlb_addr from global data
This field doesn't appear to be used for anything important, so drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:37 +0000 (20:48 +0000)]
ixp: Move timestamp to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:36 +0000 (20:48 +0000)]
arm: Move timer_reset_value to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:35 +0000 (20:48 +0000)]
arm: Move lastinc to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:34 +0000 (20:48 +0000)]
arm: Move tbl to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:33 +0000 (20:48 +0000)]
arm: Move tbu to arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:32 +0000 (20:48 +0000)]
arm: Move timer_rate_hz into arch_global_data
Move this field into arch_global_data and tidy up.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:31 +0000 (20:48 +0000)]
at91: Move at91 global data into arch_global_data
Move these fields into arch_global_data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 13 Dec 2012 20:48:30 +0000 (20:48 +0000)]
Add architecture-specific global data
We plan to move architecture-specific data into a separate structure so
that we can make the rest of it common.
As a first step, create struct arch_global_data to hold these fields.
Initially it is empty.
This patch applies to all archs at once. I can split it if this is really
a pain.
Signed-off-by: Simon Glass <sjg@chromium.org>
Vadim Bendebury [Wed, 9 Jan 2013 16:00:10 +0000 (16:00 +0000)]
patman: Allow use outside of u-boot tree
To make it usable in git trees not providing a patch checker
implementation, add a command line option, allowing to suppress patch
check. While we are at it, sort debug options alphabetically.
Also, do not raise an exception if checkpatch.pl is not found - just
print an error message suggesting to use the new option, and return
nonzero status.
. unit test passes:
$ ./patman -t
<unittest.result.TestResult run=7 errors=0 failures=0>
. successfully used patman in the autotest tree to generate a patch
email (with --no-check option)
. successfully used patman in the u-boot tree to generate a patch
email
. `patman --help' now shows command line options ordered
alphabetically
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Acked-by: Doug Anderson <dianders@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Doug Anderson [Mon, 3 Dec 2012 14:43:19 +0000 (14:43 +0000)]
patman: Add settings to the list of modules to doctest
The settings modules now has doctests, so run them.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Doug Anderson [Mon, 3 Dec 2012 14:43:18 +0000 (14:43 +0000)]
patman: Add the concept of multiple projects
There are cases that we want to support different settings (or maybe
even different aliases) for different projects. Add support for this
by:
* Adding detection for two big projects: U-Boot and Linux.
* Adding default settings for Linux (U-Boot is already good with the
standard patman defaults).
* Extend the new "settings" feature in .patman to specify per-project
settings.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Doug Anderson [Mon, 3 Dec 2012 14:43:17 +0000 (14:43 +0000)]
patman: Add support for settings in .patman
This patch adds support for a [settings] section in the .patman file.
In this section you can add settings that will affect the default
values for command-line options.
Support is added in a generic way such that any setting can be updated
by just referring to the "dest" of the option that is passed to the
option parser. At the moment options that would make sense to put in
settings are "ignore_errors", "process_tags", and "verbose". You
could override them like:
[settings]
ignore_errors: True
process_tags: False
verbose: True
The settings functionality is also used in a future change which adds
support for per-project settings.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Doug Anderson [Mon, 3 Dec 2012 14:43:16 +0000 (14:43 +0000)]
patman: Add a call to get_maintainer.pl if it exists
For Linux the best way to figure out where to send a patch is with the
"get_maintainer.pl" script. Add support for calling it from patman.
Support is added unconditionally for "scripts/get_maintainer.pl" in
case it is helpful for any other projects.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Doug Anderson [Mon, 3 Dec 2012 14:40:43 +0000 (14:40 +0000)]
patman: Add all CC addresses to the cover letter
If we're sending a cover letter make sure to CC everyone that we're
CCing on each of the individual patches.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Doug Anderson [Mon, 3 Dec 2012 14:40:42 +0000 (14:40 +0000)]
patman: Cache the CC list from MakeCcFile() for use in ShowActions()
Currently we go through and generate the CC list for patches twice.
This gets slow when (in a future CL) we add a call to
get_maintainer.pl on Linux. Instead of doing things twice, just cache
the CC list when it is first generated.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
Doug Anderson [Mon, 26 Nov 2012 15:23:23 +0000 (15:23 +0000)]
patman: Look for checkpatch in the scripts directory
The Linux kernel stores checkpatch.pl in the scripts directory. Add
that to the search path to make things more automatic for kernel
development.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
projects / kernel / u-boot.git / log