review.tizen.org Git - platform/kernel/linux-rpi.git/log

bpftool: make key optional in lookup command

Bpftool expects key for 'lookup' operations. For some map types, key should
not be specified. Support looking up those map types.

Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
Error: did not find key

After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
bpftool map lookup pinned /sys/fs/bpf/q
key: value: 00 01 02 03

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpftool: make key and value optional in update command

Bpftool expects both key and value for 'update' operations. For some
map types, key should not be specified. Support updating those map types.

Before:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3
Error: did not find key

After:
bpftool map create /sys/fs/bpf/q type queue value 4 entries 10 name q
bpftool map update pinned /sys/fs/bpf/q value 0 1 2 3

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Merge branch 'bpf-int128-btf'

Yonghong Song says:

====================
Previous maximum supported integer bit width is 64. But
the __int128 type has been supported by most (if not all)
64bit architectures including bpf for both gcc and clang.

The kernel itself uses __int128 for x64 and arm64. Some bcc
tools are using __int128 in bpf programs to describe ipv6
addresses. Without 128bit int support, the vmlinux BTF won't
work and those bpf programs using __int128 cannot utilize BTF.

This patch set therefore implements BTF __int128 support.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tools/bpf: support __int128 in bpftool map pretty dumper

For formatted output, currently when json is enabled, the decimal
number is required. Similar to kernel bpffs printout,
for int128 numbers, only hex numbers are dumped, which are
quoted as strings.

The below is an example to show plain and json pretty print
based on the map in test_btf pretty print test.

  $ bpftool m s
  75: hash  name pprint_test_has  flags 0x0
        key 4B  value 112B  max_entries 4  memlock 4096B
  $ bpftool m d id 75
  ......
    {
        "key": 3,
        "value": {
            "ui32": 3,
            "ui16": 0,
            "si32": -3,
            "unused_bits2a": 0x3,
            "bits28": 0x3,
            "unused_bits2b": 0x3,
            "": {
                "ui64": 3,
                "ui8a": [3,0,0,0,0,0,0,0
                ]
            },
            "aenum": 3,
            "ui32b": 4,
            "bits2c": 0x1,
            "si128a": 0x3,
            "si128b": 0xfffffffd,
            "bits3": 0x3,
            "bits80": 0x10000000000000003,
            "ui128": 0x20000000000000003
        }
    },
  ......

  $ bptfool -p -j m d id 75
  ......
  {
        "key": ["0x03","0x00","0x00","0x00"
        ],
        "value": ["0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0xfd","0xff","0xff","0xff","0x0f","0x00","0x00","0xc0",
                  "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x03","0x00","0x00","0x00","0x04","0x00","0x00","0x00",
                  "0x01","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0xfd","0xff","0xff","0xff","0x00","0x00","0x00","0x00",
                  "0x00","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x1b","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x08","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x03","0x00","0x00","0x00","0x00","0x00","0x00","0x00",
                  "0x02","0x00","0x00","0x00","0x00","0x00","0x00","0x00"
        ],
        "formatted": {
            "key": 3,
            "value": {
                "ui32": 3,
                "ui16": 0,
                "si32": -3,
                "unused_bits2a": "0x3",
                "bits28": "0x3",
                "unused_bits2b": "0x3",
                "": {
                    "ui64": 3,
                    "ui8a": [3,0,0,0,0,0,0,0
                    ]
                },
                "aenum": 3,
                "ui32b": 4,
                "bits2c": "0x1",
                "si128a": "0x3",
                "si128b": "0xfffffffd",
                "bits3": "0x3",
                "bits80": "0x10000000000000003",
                "ui128": "0x20000000000000003"
            }
        }
    }
  ......

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tools/bpf: add bpffs pretty print test for int128

The bpffs pretty print test is extended to cover int128 types.
Tested on an x64 machine.
  $ test_btf -p
  ......
  BTF pretty print array(#3)......OK
  PASS:9 SKIP:0 FAIL:0

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tools/bpf: refactor test_btf pretty printing for multiple map value formats

The test_btf pretty print is refactored in order to easily
support multiple map value formats. The next patch will
add __int128 type tests which needs macro guard __SIZEOF_INT128__.
There is no functionality change with this patch.

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tools/bpf: add int128 raw test in test_btf

Several int128 raw type tests are added to test_btf.
Currently these tests are enabled only for x64 and arm64
for which kernel has CONFIG_ARCH_SUPPORTS_INT128 set.

  $ test_btf
  ......
  BTF raw test[106] (128-bit int): OK
  BTF raw test[107] (struct, 128-bit int member): OK
  BTF raw test[108] (struct, 120-bit int member bitfield): OK
  BTF raw test[109] (struct, kind_flag, 128-bit int member): OK
  BTF raw test[110] (struct, kind_flag, 120-bit int member bitfield): OK
  ......

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: btf: support 128 bit integer type

Currently, btf only supports up to 64-bit integer.
On the other hand, 128bit support for gcc and clang
has existed for a long time. For example, both gcc 4.8
and llvm 3.7 supports types "__int128" and
"unsigned __int128" for virtually all 64bit architectures
including bpf.

The requirement for __int128 support comes from two areas:
  . bpf program may use __int128. For example, some bcc tools
    (https://github.com/iovisor/bcc/tree/master/tools),
    mostly tcp v6 related, tcpstates.py, tcpaccept.py, etc.,
    are using __int128 to represent the ipv6 addresses.
  . linux itself is using __int128 types. Hence supporting
    __int128 type in BTF is required for vmlinux BTF,
    which will be used by "compile once and run everywhere"
    and other projects.

For 128bit integer, instead of base-10, hex numbers are pretty
printed out as large decimal number is hard to decipher, e.g.,
for ipv6 addresses.

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

libbpf: don't define CC and AR

We are already including tools/scripts/Makefile.include which correctly
handles CROSS_COMPILE, no need to define our own vars.

See related commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering")
for more details.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

networking: Documentation: fix snmp_counters.rst Sphinx warnings

Fix over 100 documentation warnings in snmp_counter.rst by
extending the underline string lengths and inserting a blank line
after bullet items.

Examples:

Documentation/networking/snmp_counter.rst:1: WARNING: Title overline too short.
Documentation/networking/snmp_counter.rst:14: WARNING: Bullet list ends without a blank line; unexpected unindent.

Fixes: 2b96547223e3 ("add document for TCP OFO, PAWS and skip ACK counters")
Fixes: 8e2ea53a83df ("add snmp counters document")
Fixes: 712ee16c230f ("add documents for snmp counters")
Fixes: 80cc49507ba4 ("net: Add part of TCP counts explanations in snmp_counters.rst")
Fixes: b08794a922c4 ("documentation of some IP/ICMP snmp counters")

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net, decnet: use struct_size() in kzalloc()

One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:

struct foo {
int stuff;
struct boo entry[];
};

instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_nve: Use struct_size() in kzalloc()

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
int stuff;
struct boo entry[];
};

instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_acl_bloom_filter: use struct_size() in kzalloc()

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
int stuff;
void *entry[];
};

instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This issue was detected with the help of Coccinelle.

Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: dsa: ksz9477: fix indentation for switch spi bindings

Switch bindings for spi managed mode are using spaces instead of tabs.
Fix them to get a file with a proper kernel indentation style.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix ERROR:do not initialise statics to 0 in af_vsock.c

Found by scripts/checkpatch.pl
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-01-15

This series contains updates to the ice driver only.

Bruce fixes an unused variable build warning, which was introduced with
the commit 2fd527b72bb6 ("net: ndo_bridge_setlink: Add extack").  Added
ethtool support for get_eeprom and get_eeprom_len operations.  Added
support for bringing down the PHY link optional when the interface is
administratively downed.

Anirudh refactors the transmit scheduler functions, which results in
reduced code duplication and adds a helper function, which all the
scheduler functions call instead.  Added an LED blinking handler to
ethtool.  Reworked the queue management code to allow for reuse in
future XDP feature support.  Updates the driver to be able to preserve
the aggregator list after reset by moving it out of port_info and into
ice_hw.  Added the ability to offload SCTP checksum calculation to the
hardware.  Added support for new PHY types, which support higher link
speeds.

Md Fahad makes sure that RSS lookup table and hash key get configured
during the rebuild path after a reset.

Brett updates the driver to set the physical link state according to the
netdev state (up/down).  Added support for adaptive/dynamic interrupt
moderation in the ice driver, along with the ethtool operations needed.

Tony adds software timestamping support by using
ethtool_op_get_ts_info().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ice: add const qualifier to mac_addr parameter

The function ice_aq_manage_mac_write takes a pointer to a MAC address.
The parameter is not marked const, even though the function doesn't need
to modify it. This prevents passing a parameter that is already marked
const. Update the function prototype to take a const pointer, to allow
passing constant pointers to this function.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Add support for new PHY types

This patch adds code for the detection and operation of several
additional PHY types that support higher link speeds.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Offload SCTP checksum

This patch adds the ability to offload SCTP checksum calculations to the
NIC.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Allow for software timestamping

Use ethtool_op_get_ts_info to provide software timestamping.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Implement getting and setting ethtool coalesce

This patch includes the following ethtool operations:

1. get_coalesce
2. set_coalesce
3. get_per_q_coalesce
4. set_per_q_coalesce

Each ITR value (current_itr/target_itr) are stored on a per
ice_ring_container basis. This is because each valid ice_ring_container
can have 1 or more rings that are tied to the same q_vector ITR index.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Add support for adaptive interrupt moderation

Currently the driver does not support adaptive/dynamic interrupt
moderation. This patch adds support for this. Also, adaptive/dynamic
interrupt moderation is turned on by default upon driver load.

In order to support adaptive interrupt moderation, two functions were
added, ice_update_itr() and ice_itr_divisor(). These are used to
determine the current packet load and to determine a divisor based
on link speed respectively.

This patch also adds the ICE_ITR_GRAN_S define that is used in the
hot-path when setting a new ITR value. The shift is used to pet two
birds with one hand, set the ITR value while re-enabling the
interrupt. Also, the ICE_ITR_GRAN_S is defined as 1 because the device
has a ITR granularity of 2usecs.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Move aggregator list into ice_hw instance

The aggregator list needs to be preserved for use after a reset. This
patch moves it out of the port_info instance and into the ice_hw instance.

Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Rework queue management code for reuse

This patch reworks the queue management code to allow for reuse with the
XDP feature (to be added in a future patch).

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Add ethtool private flag to make forcing link down optional

Add new infrastructure for implementing ethtool private flags using the
existing pf->flags bitmap to store them, and add the link-down-on-close
ethtool private flag to optionally bring down the PHY link when the
interface is administratively downed.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Set physical link up/down when an interface is set up/down

When a netdev is set up/down we need to set the phsyical link state
accordingly. This patch adds that functionality by calling
ice_force_phys_link_state(vsi, link_up) in both the ice_stop() and
ice_open() paths.

In order to force link, ice_force_phys_link_state(vsi, link_up) will
first determine the current phy capabilities. If link has not changed
there is nothing to do. If link has changed, previous PHY capabilities
are saved and the "Enable Automatic Link Update" and "Link Establishment
State Machine (LESM)" enable bits are set. Then the new PHY config is
saved. The "Enable Automatic Link Update" will force the FW to execute
Setup link and restart auto-negotiation. This *should* then result in a
"Link Status Event (LSE)" which will cause the driver to get the current
link status.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Implement support for normal get_eeprom[_len] ethtool ops

Add support for get_eeprom and get_eeprom_len ethtool ops

Specification states that PF software accesses NVM (shadow-ram) via AQ
commands (e.g. NVM Read, NVM Write) in the range 0x000000-0x00FFFF (64KB),
so the get_eeprom_len op should return 64KB. If additional regions of the
16MB NVM must be read, another access method must be used.

The ethtool kernel code, by default, will ask for multiple page-size hunks
of the NVM not to exceed the value returned by ice_get_eeprom_len().
ice_read_sr_buf() deals with arch page sizes different than 4KB.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Add ethtool set_phys_id handler

Add led blinking handler to ethtool. Since led blinking is
controlled by FW/HW only ETHTOOL_ID_ACTIVE and ETHTOOL_ID_INACTIVE
are really needed.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Configure RSS LUT and HASH KEY in rebuild path

This patch configures the RSS lookup table and hash key post reset.

Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Refactor a few Tx scheduler functions

The following functions were refactored to call a new common function,
ice_aqc_send_sched_elem_cmd():

- ice_aq_add_sched_elems()
- ice_aq_delete_sched_elems()
- ice_aq_move_sched_elems()
- ice_aq_query_sched_elems()
- ice_aq_cfg_sched_elems()
- ice_aq_suspend_sched_elems()
- ice_aq_resume_sched_elems()

Signed-off-by: Greg Priest <greg.priest@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Merge tag 'trace-v5.0-rc1' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
"Andrea Righi fixed a NULL pointer dereference in trace_kprobe_create()

  It is possible to trigger a NULL pointer dereference by writing an
  incorrectly formatted string to the krpobe_events file"

* tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
    Gautier.

2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.

3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
    Brivio.

4) Use after free in hns driver, from Yonglong Liu.

5) icmp6_send() needs to handle the case of NULL skb, from Eric
    Dumazet.

6) Missing rcu read lock in __inet6_bind() when operating on mapped
    addresses, from David Ahern.

7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.

8) Fix PHY vs r8169 module loading ordering issues, from Heiner
    Kallweit.

9) Fix bridge vlan memory leak, from Ido Schimmel.

10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.

11) Infoleak in ipv6_local_error(), flow label isn't completely
    initialized. From Eric Dumazet.

12) Handle mv88e6390 errata, from Andrew Lunn.

13) Making vhost/vsock CID hashing consistent, from Zha Bin.

14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.

15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  bnxt_en: Fix context memory allocation.
  bnxt_en: Fix ring checking logic on 57500 chips.
  mISDN: hfcsusb: Use struct_size() in kzalloc()
  net: clear skb->tstamp in bridge forwarding path
  net: bpfilter: disallow to remove bpfilter module while being used
  net: bpfilter: restart bpfilter_umh when error occurred
  net: bpfilter: use cleanup callback to release umh_info
  umh: add exit routine for UMH process
  isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
  vhost/vsock: fix vhost vsock cid hashing inconsistent
  net: stmmac: Prevent RX starvation in stmmac_napi_poll()
  net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
  net: stmmac: Check if CBS is supported before configuring
  net: stmmac: dwxgmac2: Only clear interrupts that are active
  net: stmmac: Fix PCI module removal leak
  tools/bpf: fix bpftool map dump with bitfields
  tools/bpf: test btf bitfield with >=256 struct member offset
  bpf: fix bpffs bitfield pretty print
  net: ethernet: mediatek: fix warning in phy_start_aneg
  tcp: change txhash on SYN-data timeout
  ...

ice: Fix unused variable build warning

Commit 2fd527b72bb6 ("net: ndo_bridge_setlink: Add extack") added a new
parameter "extack" to ice_bridge_setlink but this parameter isn't used
by the function. This results in a warning: unused parameter ‘extack’
[-Wunused-parameter]. Fix that by adding an "__always_unused" qualifier.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()

It is possible to trigger a NULL pointer dereference by writing an
incorrectly formatted string to krpobe_events (trying to create a
kretprobe omitting the symbol).

Example:

echo "r:event_1 " >> /sys/kernel/debug/tracing/kprobe_events

That triggers this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 6 PID: 1757 Comm: bash Not tainted 5.0.0-rc1+ #125
Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.5.1 08/09/2018
RIP: 0010:kstrtoull+0x2/0x20
Code: 28 00 00 00 75 17 48 83 c4 18 5b 41 5c 5d c3 b8 ea ff ff ff eb e1 b8 de ff ff ff eb da e8 d6 36 bb ff 66 0f 1f 44 00 00 31 c0 <80> 3f 2b 55 48 89 e5 0f 94 c0 48 01 c7 e8 5c ff ff ff 5d c3 66 2e
RSP: 0018:ffffb5d482e57cb8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff82b12720
RDX: ffffb5d482e57cf8 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffb5d482e57d70 R08: ffffa0c05e5a7080 R09: ffffa0c05e003980
R10: 0000000000000000 R11: 0000000040000000 R12: ffffa0c04fe87b08
R13: 0000000000000001 R14: 000000000000000b R15: ffffa0c058d749e1
FS:  00007f137c7f7740(0000) GS:ffffa0c05e580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000497d46004 CR4: 00000000003606e0
Call Trace:
  ? trace_kprobe_create+0xb6/0x840
  ? _cond_resched+0x19/0x40
  ? _cond_resched+0x19/0x40
  ? __kmalloc+0x62/0x210
  ? argv_split+0x8f/0x140
  ? trace_kprobe_create+0x840/0x840
  ? trace_kprobe_create+0x840/0x840
  create_or_delete_trace_kprobe+0x11/0x30
  trace_run_command+0x50/0x90
  trace_parse_run_command+0xc1/0x160
  probes_write+0x10/0x20
  __vfs_write+0x3a/0x1b0
  ? apparmor_file_permission+0x1a/0x20
  ? security_file_permission+0x31/0xf0
  ? _cond_resched+0x19/0x40
  vfs_write+0xb1/0x1a0
  ksys_write+0x55/0xc0
  __x64_sys_write+0x1a/0x20
  do_syscall_64+0x5a/0x120
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix by doing the proper argument checks in trace_kprobe_create().

Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/lkml/20190111095108.b79a2ee026185cbd62365977@kernel.org
Link: http://lkml.kernel.org/r/20190111060113.GA22841@xps-13
Fixes: 6212dd29683e ("tracing/kprobes: Use dyn_event framework for kprobe events")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

sbitmap: Protect swap_lock from hardirq

Because we may call blk_mq_get_driver_tag() directly from
blk_mq_dispatch_rq_list() without holding any lock, then HARDIRQ may
come and the above DEADLOCK is triggered.

Commit ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") tries to
fix this issue by using 'spin_lock_bh', which isn't enough because we
complete request from hardirq context direclty in case of multiqueue.

Cc: Clark Williams <williams@redhat.com>
Fixes: ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sbitmap: Protect swap_lock from softirqs

The swap_lock used by sbitmap has a chain with locks taken from softirq,
but the swap_lock is not protected from being preempted by softirqs.

A chain exists of:

sbq->ws[i].wait -> dispatch_wait_lock -> swap_lock

Where the sbq->ws[i].wait lock can be taken from softirq context, which
means all locks below it in the chain must also be protected from
softirqs.

Reported-by: Clark Williams <williams@redhat.com>
Fixes: 58ab5e32e6fd ("sbitmap: silence bogus lockdep IRQ warning")
Fixes: ea86ea2cdced ("sbitmap: amortize cost of clearing bits")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'gpio-v5.0-2' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"The patch hitting the MMC/SD subsystem is fixing up my own mess when
  moving semantics from MMC/SD over to gpiolib. Ulf is on vacation but I
  managed to reach him on chat and obtain his ACK.

  The other two are early-rc fixes that are not super serious but pretty
  annoying so I'd like to get rid of them.

  Summary:

   - Get rid of some WARN_ON() from the ACPI code

   - Staticize a symbol

   - Fix MMC polarity detection"

* tag 'gpio-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  mmc: core: don't override the CD GPIO level when "cd-inverted" is set
  gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static
  gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts

Merge tag 'mfd-next-4.21' of git://git./linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"New Device Support
   - Add support for Power Supply to AXP813
   - Add support for GPIO, ADC, AC and Battery Power Supply to AXP803
   - Add support for UART to Exynos LPASS

  Fix-ups:
   - Use supplied MACROS; ti_am335x_tscadc
   - Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp
   - Regmap changes; bd9571mwv, wm5110-tables
   - Kconfig dependencies; MFD_AT91_USART
   - Supply shared data for child-devices; madera-core
   - Use new of_node_name_eq() API call; max77620, stmpe
   - Use managed resources (devm_*); tps65218
   - Comment descriptions; ingenic-tcu
   - Coding style; madera-core

  Bug Fixes:
   - Fix section mismatches; twl-core, db8500-prcmu
   - Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core
   - IRQ related fixes; tps6586x
   - Ensure proper initialisation sequence; qcom_rpm
   - Repair potential memory leak; cros_ec_dev"

* tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
  mfd: exynos-lpass: Enable UART module support
  mfd: mc13xxx: Fix a missing check of a register-read failure
  mfd: cros_ec: Add commands to control codec
  mfd: madera: Remove spurious semicolon in while loop
  mfd: rave-sp: Fix typo in rave_sp_checksum comment
  mfd: ingenic-tcu: Fix bit field description in header
  mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
  mfd: Use of_node_name_eq() for node name comparisons
  mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
  mfd: axp20x: Add supported cells for AXP803
  mfd: axp20x: Re-align MFD cell entries
  mfd: axp20x: Add AC power supply cell for AXP813
  mfd: wm5110: Add missing ASRC rate register
  mfd: qcom_rpm: write fw_version to CTRL_REG
  mfd: tps6586x: Handle interrupts on suspend
  mfd: madera: Add shared data for accessory detection
  mfd: at91-usart: Add platform dependency
  mfd: bd9571mwv: Add volatile register to make DVFS work
  mfd: ab8500-core: Return zero in get_register_interruptible()
  mfd: tmio: Typo s/use use/use/
  ...

Merge tag 'backlight-next-4.21' of git://git./linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
"Fix-ups:
   - Use new of_node_name_eq() API call

  Bug Fixes:
   - Internally track 'enabled' state in pwm_bl
   - Fix auto-generated pwm_bl brightness tables parsed by DT

* tag 'backlight-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: 88pm860x_bl: Use of_node_name_eq for node name comparisons
  backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables
  backlight: pwm_bl: Re-add driver internal enabled tracking

Linux 5.0-rc2

kernel/sys.c: Clarify that UNAME26 does not generate unique versions anymore

UNAME26 is a mechanism to report Linux's version as 2.6.x, for
compatibility with old/broken software.  Due to the way it is
implemented, it would have to be updated after 5.0, to keep the
resulting versions unique.  Linus Torvalds argued:

"Do we actually need this?

  I'd rather let it bitrot, and just let it return random versions. It
  will just start again at 2.4.60, won't it?

  Anybody who uses UNAME26 for a 5.x kernel might as well think it's
  still 4.x. The user space is so old that it can't possibly care about
  differences between 4.x and 5.x, can it?

  The only thing that matters is that it shows "2.4.<largeenough>",
  which it will do regardless"

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"A bigger batch than I anticipated this week, for two reasons:

   - Some fallout on Davinci from board file -> DTB conversion, that
     also includes a few longer-standing fixes (i.e. not recent
     regressions).

   - drivers/reset material that has been in linux-next for a while, but
     didn't get sent to us until now for a variety of reasons
     (maintainer out sick, holidays, etc). There's a functional
     dependency in there such that one platform (Altera's SoCFPGA) won't
     boot without one of the patches; instead of reverting the patch
     that got merged, I looked at this set and decided it was small
     enough that I'll pick it up anyway. If you disagree I can revisit
     with a smaller set.

  That being said, there's also a handful of the usual stuff:

   - Fix for a crash on Armada 7K/8K when the kernel touches
     PSCI-reserved memory

   - Fix for PCIe reset on Macchiatobin (Armada 8K development board,
     what this email is sent from in fact :)

   - Enable a few new-merged modules for Amlogic in arm64 defconfig

   - Error path fixes on Integrator

   - Build fix for Renesas and Qualcomm

   - Initialization fix for Renesas RZ/G2E

  .. plus a few more fixlets"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  ARM: integrator: impd1: use struct_size() in devm_kzalloc()
  qcom-scm: Include <linux/err.h> header
  gpio: pl061: handle failed allocations
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area
  ARM: dts: da850-lcdk: Correct the sound card name
  ARM: dts: da850-lcdk: Correct the audio codec regulators
  ARM: dts: da850-evm: Correct the sound card name
  ARM: dts: da850-evm: Correct the audio codec regulators
  ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
  ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
  ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
  ARM: davinci: da850-evm: fix label names in GPIO lookup entries
  ARM: davinci: da830-evm: fix label names in GPIO lookup entries
  arm64: defconfig: enable modules for amlogic s400 sound card
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ...

Merge tag 'for-5.0-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- two regression fixes in clone/dedupe ioctls, the generic check
   callback needs to lock extents properly and wait for io to avoid
   problems with writeback and relocation

- fix deadlock when using free space tree due to block group creation

- a recently added check refuses a valid fileystem with seeding device,
   make that work again with a quickfix, proper solution needs more
   intrusive changes

* tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Use real device structure to verify dev extent
  Btrfs: fix deadlock when using free space tree due to block group creation
  Btrfs: fix race between reflink/dedupe and relocation
  Btrfs: fix race between cloning range ending at eof and writeback

Merge tag 'driver-core-5.0-rc2' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here is one small sysfs change, and a documentation update for 5.0-rc2

  The sysfs change moves from using BUG_ON to WARN_ON, as discussed in
  an email thread on lkml while trying to track down another driver bug.
  sysfs should not be crashing and preventing people from seeing where
  they went wrong. Now it properly recovers and warns the developer.

  The documentation update removes the use of BUS_ATTR() as the kernel
  is moving away from this to use the specific BUS_ATTR_RW() and friends
  instead. There are pending patches in all of the different subsystems
  to remove the last users of this macro, but for now, don't advertise
  it should be used anymore to keep new ones from being introduced.

  Both have been in linux-next with no reported issues"

* tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: driver core: remove use of BUS_ATTR
  sysfs: convert BUG_ON to WARN_ON

Merge tag 'staging-5.0-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for some reported issues.

  One reverts a patch that was made to the rtl8723bs driver that turned
  out to not be needed at all as it was a bug in clang. The others fix
  up some reported issues in the rtl8188eu driver and update the
  MAINTAINERS file to point to Larry for this driver so he can get the
  bug reports easier.

  All have been in linux-next with no reported issues"

* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
  staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
  staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
  MAINTAINERS: Add entry for staging driver r8188eu

Merge tag 'tty-5.0-rc2' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
"Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
  issues.

  The first is a simple serial driver fix for a regression that showed
  up in 5.0-rc1. The second one resolves a number of reported issues
  with the recent tty locking fixes that went into 5.0-rc1. Lots of
  people have tested the second one and say it resolves their issues.

  Both have been in linux-next with no reported issues"

* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Don't hold ldisc lock in tty_reopen() if ldisc present
  serial: lantiq: Do not swap register read/writes

Merge tag 'usb-5.0-rc2' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and quirk updates for 5.0-rc2.

  The majority here are some quirks for some storage devices to get them
  to work properly. There's also a fix here to resolve the reported
  issues with some audio devices that say they are UAC3 compliant, but
  really are not.

  And a fix up for the MAINTAINERS file to remove a dead url.

  All have been in linux-next with no reported issues"

* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: storage: Remove outdated URL from MAINTAINERS
  USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
  usbcore: Select only first configuration for non-UAC3 compliant devices
  USB: storage: add quirk for SMI SM3350
  USB: storage: don't insert sane sense for SPC3+ when bad sense specified
  usb: cdc-acm: send ZLP for Telit 3G Intel based modems

Merge tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches
  fix an important set of crediting (flow control) problems, and also
  two problems in cifs_writepages, ddressing some large i/o and also
  compounding issues"

* tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  CIFS: Fix error paths in writeback code
  CIFS: Move credit processing to mid callbacks for SMB3
  CIFS: Fix credits calculation for cancelled requests
  cifs: Fix potential OOB access of lock element array
  cifs: Limit memory used by lock request calls to a page
  cifs: move large array from stack to heap
  CIFS: Do not hide EINTR after sending network packets
  CIFS: Fix credit computation for compounded requests
  CIFS: Do not set credits to 1 if the server didn't grant anything
  CIFS: Fix adjustment of credits for MTU requests
  cifs: Fix a tiny potential memory leak
  cifs: Fix a debug message

Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into fixes

Late reset controller changes for v5.0

This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.

* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
  reset: socfpga: add an early reset driver for SoCFPGA
  reset: fix null pointer dereference on dev by dev_name
  reset: Add reset_control_get_count()
  reset: Improve reset controller kernel docs
  ARC: HSDK: improve reset driver

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 5.0

They are all device tree fixes which also worth being in stable:

- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
   this area and crashing while doing it.

- Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)

- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)

* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'integrator-fixes-armsoc' of git://git./linux/kernel/git/linusw/linux-integrator into fixes

Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.

* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
gpio: pl061: handle failed allocations

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-fixes' of https://git./linux/kernel/git/khilman/linux-amlogic into fixes

Amlogic DT fixes for v5.0-rc
- arm64: defconfig: enable modules for amlogic s400 sound card

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: defconfig: enable modules for amlogic s400 sound card

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-fixes-for-5.0-rc1' of git://git./linux/kernel/git/agross/linux into fixes

Qualcomm Driver Fixes for 5.0-rc1

* Add required includes into qcom_scm.h

* tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
qcom-scm: Include <linux/err.h> header

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-fixes-for-v5.0' of git://git./linux/kernel/git/nsekhar/linux-davinci into fixes

This pull request fixes some more regressions on legacy
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.

Also has fixes for some long standing Audio issues on DA850
boards.

* tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-lcdk: Correct the sound card name
  ARM: dts: da850-lcdk: Correct the audio codec regulators
  ARM: dts: da850-evm: Correct the sound card name
  ARM: dts: da850-evm: Correct the audio codec regulators
  ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
  ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
  ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
  ARM: davinci: da850-evm: fix label names in GPIO lookup entries
  ARM: davinci: da830-evm: fix label names in GPIO lookup entries

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-fixes-for-v5.0' of https://git./linux/kernel/git/horms/renesas into fixes

Renesas ARM Based SoC Fixes for v5.0

Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols

RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver

* tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
ARM: shmobile: fix build regressions

Signed-off-by: Olof Johansson <olof@lixom.net>

phy: fix build breakage: add PHY_MODE_SATA

Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.

Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.

Fix the build by:

    1) Renaming Marvell's defined value to a more scoped name,
       in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.

    2) Adding the missing enum, which was going to be added anyway as part
       of [1].

[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com

Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework")

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- NVMe pull request from Christoph, with little fixes all over the map

- Loop caching fix for offset/bs change (Jaegeuk Kim)

- Block documentation tweaks (Jeff, Jon, Weiping, John)

- null_blk zoned tweak (John)

- ahch mvebu suspend/resume support. Should have gone into the merge
   window, but there was some confusion on which tree had it. (Miquel)

* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
  ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
  ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
  ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
  ata: ahci: mvebu: remove stale comment
  ata: libahci_platform: comply to PHY framework
  loop: drop caches if offset or block_size are changed
  block: fix kerneldoc comment for blk_attempt_plug_merge()
  nvme: don't initlialize ctrl->cntlid twice
  nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
  nvme: pad fake subsys NQN vid and ssvid with zeros
  nvme-multipath: zero out ANA log buffer
  nvme-fabrics: unset write/poll queues for discovery controllers
  nvme-tcp: don't ask if controller is fabrics
  nvme-tcp: remove dead code
  nvme-pci: fix out of bounds access in nvme_cqe_pending
  nvme-pci: rerun irq setup on IO queue init errors
  nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
  nvme-pci: fix the wrong setting of nr_maps
  block: doc: add slice_idle_us to bfq documentation
  block: clarify documentation for blk_{start|finish}_plug
  ...

Merge tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping

Pull dma_zalloc_coherent() removal from Christoph Hellwig:
"We've always had a weird situation around dma_zalloc_coherent. To
  safely support mapping the allocations to userspace major
  architectures like x86 and arm have always zeroed allocations from
  dma_alloc_coherent, but a couple other architectures were missing that
  zeroing either always or in corner cases.

  Then later we grew anothe dma_zalloc_coherent interface to explicitly
  request zeroing, but that just added __GFP_ZERO to the allocation
  flags, which for some allocators that didn't end up using the page
  allocator ended up being a no-op and still not zeroing the
  allocations.

  So for this merge window I fixed up all remaining architectures to
  zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
  no-op wrapper around dma_alloc_coherent, which fixes all of the above
  issues.

  dma_zalloc_coherent is now pointless and can go away, and Luis helped
  me writing a cocchinelle script and patch series to kill it, which I
  think we should apply now just after -rc1 to finally settle these
  issue"

* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: remove dma_zalloc_coherent()
  cross-tree: phase out dma_zalloc_coherent() on headers
  cross-tree: phase out dma_zalloc_coherent()

Merge branch 'bnxt_en-Bug-fixes-for-57500-chips'

Michael Chan says:

====================
bnxt_en: Bug fixes for 57500 chips.

Two small bug fixes for ring checking and context memory allocation
that affect the new 57500 chips.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix context memory allocation.

When allocating memory pages for context memory, if the last page table
should be fully populated, the current code will set nr_pages to 0 when
calling bnxt_alloc_ctx_mem_blk(). This will cause the last page table
to be completely blank and causing some RDMA failures.

Fix it by setting the last page table's nr_pages to the remainder only
if it is non-zero.

Fixes: 08fe9d181606 ("bnxt_en: Add Level 2 context memory paging support.")
Reported-by: Eric Davis <eric.davis@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix ring checking logic on 57500 chips.

In bnxt_hwrm_check_pf_rings(), add the proper flag to test the NQ
resources. Without the proper flag, the firmware will change
the NQ resource allocation and remap the IRQ, causing missing
IRQs. This issue shows up when adding MQPRIO TX queues, for example.

Fixes: 36d65be9a880 ("bnxt_en: Disable MSIX before re-reserving NQs/CMPL rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"Minor fixes for new code, corner cases, and documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed
  Documentation/virtual/kvm: Update URL for AMD SEV API specification
  KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()
  kvm: sev: Fail KVM_SEV_INIT if already initialized
  KVM: validate userspace input in kvm_clear_dirty_log_protect()
  KVM: x86: Fix bit shifting in update_intel_pt_cfg

Merge tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm

Pull more drm fixes from Daniel Vetter:
"Dave sends out his pull, everybody remembers holidays are over :-)

  Since Dave's already in weekend mode and it was quite a few patches I
  figured better to apply all the pulls and forward them to you. Hence
  here 2nd part of bugfixes for -rc2.

  nouveau:
   - backlight fix
   - falcon register access fix
   - fan fix.

  i915:
   - Disable PSR for Apple panels
   - Broxton ERR_PTR error state fix
   - Kabylake VECS workaround fix
   - Unwind failure on pinning the gen7 ppgtt
   - GVT workload request allocation fix

  core:
   - Fix fb-helper to work correctly with SDL 1.2 bugs
   - Fix lockdep warning in the atomic ioctl and setproperty"

* tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/falcon: avoid touching registers if engine is off
  drm/nouveau: Don't disable polling in fallback mode
  drm/nouveau: register backlight on pascal and newer
  drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
  drm/i915: init per-engine WAs for all engines
  drm/i915: Unwind failure on pinning the gen7 ppgtt
  drm/i915: Skip the ERR_PTR error state
  drm/i915: Disable PSR in Apple panels
  gpu/drm: Fix lock held when returning to user space.
  drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
  drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
  drm/i915/gvt: Fix workload request allocation before request add

mISDN: hfcsusb: Use struct_size() in kzalloc()

One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:

struct foo {
int stuff;
void *entry[];
};

instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: clear skb->tstamp in bridge forwarding path

Matteo reported forwarding issues inside the linux bridge,
if the enslaved interfaces use the fq qdisc.

Similar to commit 8203e2d844d3 ("net: clear skb->tstamp in
forwarding paths"), we need to clear the tstamp field in
the bridge forwarding path.

Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Reported-and-tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bpfilter-fixes'

Taehee Yoo says:

====================
net: bpfilter: fix two bugs in bpfilter

This patches fix two bugs in the bpfilter_umh which are related in
iptables command.

The first patch adds an exit code for UMH process.
This provides an opportunity to cleanup members of the umh_info
to modules which use the UMH.
In order to identify UMH processes, a new flag PF_UMH is added.

The second patch makes the bpfilter_umh use UMH cleanup callback.

The third patch adds re-start routine for the bpfilter_umh.
The bpfilter_umh does not re-start after error occurred.
because there is no re-start routine in the module.

The fourth patch ensures that the bpfilter.ko module will not removed while
it's being used.
The bpfilter.ko is not protected by locks or module reference counter.
Therefore that can be removed while module is being used.
In order to protect that, mutex is used.

The first and second patch are preparation patches for the third and
fourth patch.

TEST #1
   while :
   do
modprobe bpfilter
kill -9 <pid of the bpfilter_umh>
iptables -vnL
   done

TEST #2
   while :
   do
iptables -I FORWARD -m string --string ap --algo kmp &
iptables -F &
modprobe -rv bpfilter &
   done

TEST #3
   while :
   do
modprobe bpfilter &
modprobe -rv bpfilter &
   done

The TEST1 makes a failure of iptables command.
This is fixed by the third patch.

The TEST2 makes a panic because of a race condition in the bpfilter_umh
module.
This is fixed by the fourth patch.

The TEST3 makes a double-create UMH process.
This is fixed by the third and fourth patch.

v4 :
- declare the exit_umh() as static inline
- check stop flag in the load_umh() to avoid a double-create UMH
v3 :
- Avoid unnecessary list lookup for non-UMH processes
- Add a new PF_UMH flag
v2 : add the first and second patch
v1 : Initial patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: bpfilter: disallow to remove bpfilter module while being used

The bpfilter.ko module can be removed while functions of the bpfilter.ko
are executing. so panic can occurred. in order to protect that, locks can
be used. a bpfilter_lock protects routines in the
__bpfilter_process_sockopt() but it's not enough because __exit routine
can be executed concurrently.

Now, the bpfilter_umh can not run in parallel.
So, the module do not removed while it's being used and it do not
double-create UMH process.
The members of the umh_info and the bpfilter_umh_ops are protected by
the bpfilter_umh_ops.lock.

test commands:
   while :
   do
iptables -I FORWARD -m string --string ap --algo kmp &
modprobe -rv bpfilter &
   done

splat looks like:
[  298.623435] BUG: unable to handle kernel paging request at fffffbfff807440b
[  298.628512] #PF error: [normal kernel read fault]
[  298.633018] PGD 124327067 P4D 124327067 PUD 11c1a3067 PMD 119eb2067 PTE 0
[  298.638859] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  298.638859] CPU: 0 PID: 2997 Comm: iptables Not tainted 4.20.0+ #154
[  298.638859] RIP: 0010:__mutex_lock+0x6b9/0x16a0
[  298.638859] Code: c0 00 00 e8 89 82 ff ff 80 bd 8f fc ff ff 00 0f 85 d9 05 00 00 48 8b 85 80 fc ff ff 48 bf 00 00 00 00 00 fc ff df 48 c1 e8 03 <80> 3c 38 00 0f 85 1d 0e 00 00 48 8b 85 c8 fc ff ff 49 39 47 58 c6
[  298.638859] RSP: 0018:ffff88810e7777a0 EFLAGS: 00010202
[  298.638859] RAX: 1ffffffff807440b RBX: ffff888111bd4d80 RCX: 0000000000000000
[  298.638859] RDX: 1ffff110235ff806 RSI: ffff888111bd5538 RDI: dffffc0000000000
[  298.638859] RBP: ffff88810e777b30 R08: 0000000080000002 R09: 0000000000000000
[  298.638859] R10: 0000000000000000 R11: 0000000000000000 R12: fffffbfff168a42c
[  298.638859] R13: ffff888111bd4d80 R14: ffff8881040e9a05 R15: ffffffffc03a2000
[  298.638859] FS:  00007f39e3758700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
[  298.638859] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  298.638859] CR2: fffffbfff807440b CR3: 000000011243e000 CR4: 00000000001006f0
[  298.638859] Call Trace:
[  298.638859]  ? mutex_lock_io_nested+0x1560/0x1560
[  298.638859]  ? kasan_kmalloc+0xa0/0xd0
[  298.638859]  ? kmem_cache_alloc+0x1c2/0x260
[  298.638859]  ? __alloc_file+0x92/0x3c0
[  298.638859]  ? alloc_empty_file+0x43/0x120
[  298.638859]  ? alloc_file_pseudo+0x220/0x330
[  298.638859]  ? sock_alloc_file+0x39/0x160
[  298.638859]  ? __sys_socket+0x113/0x1d0
[  298.638859]  ? __x64_sys_socket+0x6f/0xb0
[  298.638859]  ? do_syscall_64+0x138/0x560
[  298.638859]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  298.638859]  ? __alloc_file+0x92/0x3c0
[  298.638859]  ? init_object+0x6b/0x80
[  298.638859]  ? cyc2ns_read_end+0x10/0x10
[  298.638859]  ? cyc2ns_read_end+0x10/0x10
[  298.638859]  ? hlock_class+0x140/0x140
[  298.638859]  ? sched_clock_local+0xd4/0x140
[  298.638859]  ? sched_clock_local+0xd4/0x140
[  298.638859]  ? check_flags.part.37+0x440/0x440
[  298.638859]  ? __lock_acquire+0x4f90/0x4f90
[  298.638859]  ? set_rq_offline.part.89+0x140/0x140
[ ... ]

Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bpfilter: restart bpfilter_umh when error occurred

The bpfilter_umh will be stopped via __stop_umh() when the bpfilter
error occurred.
The bpfilter_umh() couldn't start again because there is no restart
routine.

The section of the bpfilter_umh_{start/end} is no longer .init.rodata
because these area should be reused in the restart routine. hence
the section name is changed to .bpfilter_umh.

The bpfilter_ops->start() is restart callback. it will be called when
bpfilter_umh is stopped.
The stop bit means bpfilter_umh is stopped. this bit is set by both
start and stop routine.

Before this patch,
Test commands:
   $ iptables -vnL
   $ kill -9 <pid of bpfilter_umh>
   $ iptables -vnL
   [  480.045136] bpfilter: write fail -32
   $ iptables -vnL

All iptables commands will fail.

After this patch,
Test commands:
   $ iptables -vnL
   $ kill -9 <pid of bpfilter_umh>
   $ iptables -vnL
   $ iptables -vnL

Now, all iptables commands will work.

Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bpfilter: use cleanup callback to release umh_info

Now, UMH process is killed, do_exit() calls the umh_info->cleanup callback
to release members of the umh_info.
This patch makes bpfilter_umh's cleanup routine to use the
umh_info->cleanup callback.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

umh: add exit routine for UMH process

A UMH process which is created by the fork_usermode_blob() such as
bpfilter needs to release members of the umh_info when process is
terminated.
But the do_exit() does not release members of the umh_info. hence module
which uses UMH needs own code to detect whether UMH process is
terminated or not.
But this implementation needs extra code for checking the status of
UMH process. it eventually makes the code more complex.

The new PF_UMH flag is added and it is used to identify UMH processes.
The exit_umh() does not release members of the umh_info.
Hence umh_info->cleanup callback should release both members of the
umh_info and the private data.

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: i4l: isdn_tty: Fix some concurrency double-free bugs

The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be
concurrently executed.

isdn_tty_tiocmset
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

isdn_tty_set_termios
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

Thus, some concurrency double-free bugs may occur.

These possible bugs are found by a static tool written by myself and
my manual code review.

To fix these possible bugs, the mutex lock "modem_info_mutex" used in
isdn_tty_tiocmset() is added in isdn_tty_set_termios().

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: fix vhost vsock cid hashing inconsistent

The vsock core only supports 32bit CID, but the Virtio-vsock spec define
CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as
zero. This inconsistency causes one bug in vhost vsock driver. The
scenarios is:

  0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock
  object. And hash_min() is used to compute the hash key. hash_min() is
  defined as:
  (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)).
  That means the hash algorithm has dependency on the size of macro
  argument 'val'.
  0. In function vhost_vsock_set_cid(), a 64bit CID is passed to
  hash_min() to compute the hash key when inserting a vsock object into
  the hash table.
  0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min()
  to compute the hash key when looking up a vsock for an CID.

Because the different size of the CID, hash_min() returns different hash
key, thus fails to look up the vsock object for an CID.

To fix this bug, we keep CID as u64 in the IOCTLs and virtio message
headers, but explicitly convert u64 to u32 when deal with the hash table
and vsock core.

Fixes: 834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers")
Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.tex
Signed-off-by: Zha Bin <zhabin@linux.alibaba.com>
Reviewed-by: Liu Jiang <gerry@linux.alibaba.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'stmmac-fixes'

Jose Abreu says:

====================
net: stmmac: Misc Fixes

Some small fixes for stmmac targeting -net. Detailed info in commit log.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Prevent RX starvation in stmmac_napi_poll()

Currently, TX is given a budget which is consumed by stmmac_tx_clean()
and stmmac_rx() is given the remaining non-consumed budget.

This is wrong and in case we are sending a large number of packets this
can starve RX because remaining budget will be low.

Let's give always the same budget for RX and TX clean.

While at it, check if we missed any interrupts while we were in NAPI
callback by looking at DMA interrupt status.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fix the logic of checking if RX Watchdog must be enabled

RX Watchdog can be disabled by platform definitions but currently we are
initializing the descriptors before checking if Watchdog must be
disabled or not.

Fix this by checking earlier if user wants Watchdog disabled or not.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Check if CBS is supported before configuring

Check if CBS is currently supported before trying to configure it in HW.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwxgmac2: Only clear interrupts that are active

In DMA interrupt handler we were clearing all interrupts status, even
the ones that were not active. Fix this and only clear the active
interrupts.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fix PCI module removal leak

Since commit b7d0f08e9129, the enable / disable of PCI device is not
managed which will result in IO regions not being automatically unmapped.
As regions continue mapped it is currently not possible to remove and
then probe again the PCI module of stmmac.

Fix this by manually unmapping regions on remove callback.

Changes from v1:
- Fix build error

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ata: ahci: mvebu: request PHY suspend/resume for Armada 3700

A feature has been added in the libahci driver: the possibility to set
a new flag in hpriv->flags to let the core handle PHY suspend/resume
automatically. Make use of this feature to make suspend to RAM work
with SATA drives on A3700.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM

A3700 comphy initialization is done in the firmware (TF-A). Looking at
the SATA PHY initialization routine, there is a comment about "vendor
specific" registers. Two registers are mentioned. They are not
initialized there in the firmware because they are AHCI related, while
the firmware at this location does only PHY configuration. The
solution to avoid doing such initialization is relying on U-Boot.

While this work at boot time, U-Boot is definitely not going to run
during a resume after suspending to RAM.

Two possible solutions were considered:
* Fixing the firmware.
* Fixing the kernel driver.

The first solution would take ages to propagate, while the second
solution is easy to implement as the driver as been a little bit
reworked to prepare for such platform configuration. Hence, this patch
adds an Armada 3700 configuration function to set these two registers
both at boot time (in the probe) and after a suspend (in the resume
path).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs

At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.

Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.

Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: ahci: mvebu: remove stale comment

For Armada-38x (32-bit) SoCs, PM platform support has been added since:
commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the
introduction of Armada 38x support")
commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support")

For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM
platform support has always existed.

There are even suspend/resume hooks in this driver since:
commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")

Remove the stale comment at the end of this driver stating that all
the above does not exist yet.

Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: libahci_platform: comply to PHY framework

Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().

PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2019-01-11

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix TCP-BPF support for correctly setting the initial window
   via TCP_BPF_IW on an active TFO sender, from Yuchung.

2) Fix a panic in BPF's stack_map_get_build_id()'s ELF parsing on
   32 bit archs caused by page_address() returning NULL, from Song.

3) Fix BTF pretty print in kernel and bpftool when bitfield member
   offset is greater than 256. Also add test cases, from Yonghong.

4) Fix improper argument handling in xdp1 sample, from Ioana.

5) Install missing tcp_server.py and tcp_client.py files from
   BPF selftests, from Anders.

6) Add test_libbpf to gitignore in libbpf and BPF selftests,
   from Stanislav.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"I2C has one core and one driver bugfix for you"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Fix Maximum transfer size
i2c: dev: prevent adapter retries and timeout being set as minus value

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Another handful of arm64 fixes here. Most of the complication comes
  from improving our kpti code to avoid lengthy pauses (30+ seconds)
  during boot when we rewrite the page tables. There are also a couple
  of IORT fixes that came in via Lorenzo.

  Summary:

   - Don't error in kexec_file_load if kaslr-seed is missing in
     device-tree

   - Fix incorrect argument type passed to iort_match_node_callback()

   - Fix IORT build failure when CONFIG_IOMMU_API=n

   - Fix kpti performance regression with new rodata default option

   - Typo fix"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
  ACPI/IORT: Fix rc_dma_get_range()
  arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
  arm64: asm-prototypes: Fix fat-fingered typo in comment
  ACPI/IORT: Fix build when CONFIG_IOMMU_API=n

Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
"A patch to allow setting abort_on_full and a fix for an old "rbd
  unmap" edge case, marked for stable"

* tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client:
  rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
  ceph: use vmf_error() in ceph_filemap_fault()
  libceph: allow setting abort_on_full for rbd

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf tooling updates from Ingo Molnar:
"Tooling changes only: fixes and a few stray improvements.

  Most of the diffstat is dominated by a PowerPC related fix of system
  call trace output beautification that allows us to (again) use the
  UAPI header version and sync up with the kernel's version of PowerPC
  system call names in the arch/powerpc/kernel/syscalls/syscall.tbl
  header"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  tools headers powerpc: Remove unistd.h
  perf powerpc: Rework syscall table generation
  perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
  tools include uapi: Sync linux/if_link.h copy with the kernel sources
  tools include uapi: Sync linux/vhost.h with the kernel sources
  tools include uapi: Sync linux/fs.h copy with the kernel sources
  perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
  tools include uapi: Grab a copy of linux/mount.h
  perf top: Lift restriction on using callchains without "sym" in --sort
  tools lib traceevent: Remove tep_data_event_from_type() API
  tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()
  tools lib traceevent: Changed return logic of tep_register_event_handler() API
  tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
  tools lib traceevent: Rename struct cmdline to struct tep_cmdline
  tools lib traceevent: Initialize host_bigendian at tep_handle allocation
  tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
  perf tests: Add a test for the ARM 32-bit [vectors] page
  perf tools: Make find_vdso_map() more modular
  perf trace: Fix alignment for [continued] lines
  perf trace: Fix ')' placement in "interrupted" syscall lines
  ...

x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed

Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction
in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in
kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when
vmptr address is not backed is wrong, we end up advancing RIP twice.

Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Documentation/virtual/kvm: Update URL for AMD SEV API specification

The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst
is no longer valid, replaced space with underscore.

Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()

The "ret" is initialized to be ENOTSUPP. The return value of
__hv_remote_flush_tlb_with_range() will be Or with "ret" when ept
table potiners are mismatched. This will cause return ENOTSUPP even if
flush tlb successfully. This patch is to fix the issue and set
"ret" to 0.

Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.")
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

kvm: sev: Fail KVM_SEV_INIT if already initialized

By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.

Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.

This code is serialized by kvm->lock.

Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: validate userspace input in kvm_clear_dirty_log_protect()

The function at issue does not fully validate the content of the
structure pointed by the log parameter, though its content has just been
copied from userspace and lacks validation. Fix that.

Moreover, change the type of n to unsigned long as that is the type
returned by kvm_dirty_bitmap_bytes().

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com
[Squashed the fix from Paolo. - Radim.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: Fix bit shifting in update_intel_pt_cfg

ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is
being left shifted more than 32 bits, the behavior is undefined.

Fix this by adding suffix ULL to integer 0xf.

Addresses-Coverity-ID: 1476095 ("Bad bit shift operation")
Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL
  to CONFIG_X86_RESCTRL"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
  x86/cache: Rename config option to CONFIG_X86_RESCTRL
  samples/seccomp: Fix 32-bit build

Merge tag 'acpi-5.0-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"Fix a build failure introduced recently, fix the xpower PMIC ACPI
  driver, clean up the handling of duplicate entries in _PRx power
  resource lists and fix addresses in NUMA-related messages on 32-bit
  with PAE.

  Specifics:

   - Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
     can occur since ACPI can be built without PCI now (Sinan Kaya).

   - Clean up the handling of duplicate entries in power resource lists
     returned by _PRx evaluation to avoid triggering WARN_ON() on
     attempts to add duplicate symlinks in sysfs (Hans de Goede).

   - Fix issues with the TS current-source switching on systems using
     the xpower PMIC by avoiding to update unrelated bits in the TS
     pin-ctrl register and avoiding to unconditionally enable TS
     current-source on systems where it is not used (Hans de Goede).

   - Fix addresses in NUMA-related messages on 32-bit with PAE which can
     be truncated due to integer type conversions (Chao Fan)"

* tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: xpower: Fix TS-pin current-source handling
  ACPI: NUMA: Use correct type for printing addresses on i386-PAE
  ACPI: power: Skip duplicate power resource references in _PRx
  ACPI: Fix build failure when CONFIG_NLS is set to 'n'

Merge tag 'pm-5.0-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These fix fallout after starting to use hrtimers in the runtime PM
  framework, fix a few cpufreq issues, fix a recently broken reference
  to cpuidle documentation, update MAINTAINERS entries for cpufreq and
  cpuidle and make the recently added system suspend and resume support
  in devfreq actually work.

  Specifics:

   - Prevent integer overflows from occurring on 32-bit when converting
     milliseconds to nanoseconds in the runtime PM framework and update
     comments that still refer to jiffies in it (Vincent Guittot,
     Ladislav Michl).

   - Fix the SCMI cpufreq driver to always use the same frequency units
     for arch_set_freq_scale() and make the scale-invariant load
     tracking acutally work with this driver (Quentin Perret).

   - Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
     broken during the 4.20 defelopment cycle (Viresh Kumar).

   - Prevent the cpufreq core from attempting to return the current
     frequency of offline CPUs (Sudeep Holla).

   - Add devfreq suspend and resume hooks (missed previously) to the PM
     core to make the recently added system suspend and resume support
     in devfreq actually work (Lukasz Luba).

   - Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
     references to new/current documentation to them (Rafael Wysocki).

   - Fix a recently broken reference to cpuidle documentation (Otto
     Sabart)"

* tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM-runtime: Fix autosuspend_delay on 32bits arch
  PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
  cpufreq: scmi: Fix frequency invariance in slow path
  doc: trace: fix reference to cpuidle documentation file
  cpufreq: check if policy is inactive early in __cpufreq_get()
  cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
  cpuidle / Documentation: Update cpuidle MAINTAINERS entry
  cpufreq / Documentation: Update cpufreq MAINTAINERS entry
  PM: sleep: call devfreq suspend/resume

Merge tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Not a huge amount for rc2, assume the usual quiet period, and rc3 will
  be most of it.

  amdgpu:
   - Powerplay fixes
   - Virtual display pinning fixes
   - Golden register updates for Vega
   - Pitch and gem size validation fixes
   - SR-IOV init error fix
   - Pagetables in system RAM disable for some Raven system
   - DP-MST resume fixes

  tc358767 bridge:
   - fix to work with displayport connector"

* tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits)
  drm/amdgpu: disable system memory page tables for now
  drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang
  drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20
  drm/bridge: tc358767: use DP connector if no panel set
  drm/bridge: tc358767: fix output H/V syncs
  drm/bridge: tc358767: reject modes which require too much BW
  drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value
  drm/bridge: tc358767: fix single lane configuration
  drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE
  drm/bridge: tc358767: add bus flags
  drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume()
  drm/amdgpu: Don't fail resume process if resuming atomic state fails
  drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()
  drm/amdgpu: validate user GEM object size
  drm/amdgpu: validate user pitch alignment
  drm/amd/powerplay: drop the unnecessary uclk hard min setting
  drm/amd/powerplay: avoid possible buffer overflow
  drm/amd/powerplay: create pp_od_clk_voltage device file under OD support
  drm/amd/powerplay: update OD support flag for SKU with no OD capabilities
  drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG
  ...

tty: Don't hold ldisc lock in tty_reopen() if ldisc present

Try to get reference for ldisc during tty_reopen().
If ldisc present, we don't need to do tty_ldisc_reinit() and lock the
write side for line discipline semaphore.
Effectively, it optimizes fast-path for tty_reopen(), but more
importantly it won't interrupt ongoing IO on the tty as no ldisc change
is needed.
Fixes user-visible issue when tty_reopen() interrupted login process for
user with a long password, observed and reported by Lukas.

Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending")
Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()")
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Tested-by: Lukas F. Hartmann <lukas@mntmn.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: don't override the CD GPIO level when "cd-inverted" is set

Since commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") gpiolib-of parses the "cd-gpios" property and flips the polarity
if "cd-inverted" is also set. This results in the "cd-inverted" property
being evaluated twice, which effectively makes it a no-op:
- first in drivers/gpio/gpiolib-of.c (of_xlate_and_get_gpiod_flags) when
setting up the CD GPIO
- then again in drivers/mmc/core/slot-gpio.c (mmc_gpio_get_cd) when
reading the CD GPIO value at runtime

On boards which are using device-tree with the "cd-inverted" property
being set any inserted card are not detected anymore. This is due to the
MMC core treating the CD GPIO with the wrong polarity.

Disable "override_cd_active_level" for the card detection GPIO which is
parsed using mmc_of_parse. This fixes SD card detection on the boards
which are currently using the "cd-inverted" device-tree property (tested
on Meson8b Odroid-C1 and Meson8b EC-100).

This does not remove the CD GPIO inversion logic from the MMC core
because there's at least one driver (sdhci-pci-core for Intel BayTrail
based boards) which still passes "override_cd_active_level = true" to
mmc_gpiod_request_cd(). Due to lack of hardware for testing this is left
untouched.
In the future the GPIO inversion logic for both, card and read-only
detection can be removed once no driver is using it anymore.

Fixes: 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Loys Ollivier <loys.ollivier@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>