mt76: mt7615: fix .add_beacon_offload()

ieee80211_beacon_get_template() returns NULL when beacon state is disabled,
so beacon_offload cannot be disabled for some devices.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: rework mt7921_mcu_debug_msg_event routine

Rework mt7921_mcu_debug_msg_event routing removing unnecessary
assignments and relying on wiphy_info

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: always wake the device in mt7921_remove_interface

Make sure the mcu is not in sleep mode before sending mcu messages in
mt7921_remove_interface routine.

Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix key set/delete issue

Similar to the mt7915 driver, deleting a key with the previous key index
deletes the current key. Rework the code to better keep track of
multiple keys and check for the key index before deleting the current
key

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix txpower init for TSSI off chips

Fix incorrect txpower init value for TSSI off chips which causes
too small txpower.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: remove redundant dev_err call in mt7622_wmac_probe()

There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

dt-bindings:net:wireless:mediatek,mt76: txt to yaml conversion

Convert mt76 dts bindings from .txt to .yaml

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

dt-bindings:net:wireless:ieee80211: txt to yaml conversion

Convert generic ieee80211 dts bindings from .txt to .yaml

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: limit firmware log message printk to buffer length

Avoid including garbage from previous rx data

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: limit firmware log message printk to buffer length

Avoid including garbage from previous rx data

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix chip reset on MT7622 and MT7663e

After chip reset, the DMA scheduler needs to be initialized as well.
Since the code is PCI/SoC specific, move it to pci_mac.c, so that it
can depend on a function in dma.c

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: cleanup mcu tx queue in mt7915_dma_reset()

Cleanup mcu queues in mt7915_mac_reset_work().

Fixes: e637763b606b ("mt76: move mcu queues to mt76_dev q_mcu array")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: keep mcu_add_bss_info enabled till interface removal

The same as mt7615. Keep BSS_INFO_BASIC enabled throughout interfaces
life cycle.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: keep mcu_add_bss_info enabled till interface removal

BSS_INFO_BASIC is never called alone with inactive state, which always
follows beacon offload disable, so keep it enabled throughout interfaces
life cycle. Inactive state also removes sta record of all connected
stations, thurs causes connection lost which defeats the purpose of CSA.

Lastly, this is especially an unexpected behavior that keeping mt7622
failing beacon buffer recyled when scanning channels.

bss_conf change is updated with active state only, so just overwrite it.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7622: trigger hif interrupt for system reset

hif interrupt needs to be triggered after MT_MCU_INT_EVENT.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: cleanup mcu tx queue in mt7615_dma_reset()

With this patch, mt7615_mac_reset_work() can recover system back.

Fixes: e637763b606b ("mt76: move mcu queues to mt76_dev q_mcu array")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: only enable DFS test knobs for mt7615

DFS knobs should not be visible to non-DFS devices.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: properly configure rcpi adding a sta to the fw

Properly configure rcpi based on association process rssi. rcpi is used
by rate controller embedded into the fw to initialize amsdu size.

Tested-by: Jayden.Kuo <jayden.kuo@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: introduce mt76_sta_cmd_info data structure

Introduce mt76_sta_cmd_info data structure to contain parameters passed
to mt76_sta_cmd_info routine. This is preliminary patch to properly
configure rcpi for mt7921 devices.

Tested-by: Jayden.Kuo <jayden.kuo@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: get rid of mt7921_mac_wtbl_lmac_addr

Get rid of mt7921_mac_wtbl_lmac_addr routine since mt7921 wtbl size is
19 entries

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: refresh repeater entry MAC address when setting BSSID

When disassociating and clearing the BSSID of a repeater entry used by a client
mode interface, the corresponding MAC address entry can get lost too, causing
the client interface to not be able to associate anymore.
Fix this by also refreshing the MAC address when setting the BSSID

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix key set/delete issue

Deleting a key with the previous key index deletes the current key
Rework the code to better keep track of multiple keys and check for the
key index before deleting the current key

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: remove duplicated macros in mcu.h

Remove mcu definitions already available in mt76_connac_mcu.h

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: remove redundant check on type

Currently in the switch statement case where type is
NL80211_IFTYPE_STATION there is a check to see if type
is not NL80211_IFTYPE_STATION.  This check is always false
and is redundant dead code that can be removed.

Addresses-Coverity: ("Logically dead code")
Fixes: e0f9fdda81bd ("mt76: mt7921: add ieee80211_ops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: remove leftovers from dbdc configuration

Remove leftovers from dbdc configuration since mt7921
does not support it.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add wifi reset support

Introduce wifi chip reset support for mt7921 device to recover mcu
hangs.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: dma: export mt76_dma_rx_cleanup routine

Export mt76_dma_rx_cleanup routine in mt76_queue_ops data structure.
This is a preliminary patch to introduce mt7921 chip reset support.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: dma: introduce mt76_dma_queue_reset routine

Introduce mt76_dma_queue_reset utility routine to reset a given hw
queue. This is a preliminary patch to introduce mt7921 chip reset
support.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: introduce __mt7921_start utility routine

This is a preliminary patch to introduce mt7921 chip reset support.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: introduce mt7921_run_firmware utility routine.

This is a preliminary patch to introduce chip reset for mt7921 devices.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: introduce mcu_reset function pointer in mt76_mcu_ops structure

Introduce mcu_reset function pointer in mt76_mcu_ops structure in order
to run hw related reset function for the mcu running on the chipset.
This is a preliminary patch to introduce chip reset for mt7921 devices.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: reduce mcu timeouts for suspend, offload and hif_ctrl msg

Reduce mcu timeout for the following uni mcu commands:
- MCU_UNI_CMD_SUSPEND
- MCU_UNI_CMD_OFFLOAD
- MCU_UNI_CMD_HIF_CTRL

This is a preliminary patch to introduce chip reset support

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix possible deadlock while mt7915_register_ext_phy()

ieee80211_register_hw() is called with rtnl_lock held, and this could be
caused lockdep from a work item that's on a workqueue that is flushed
with the rtnl held.

Move mt7915_register_ext_phy() outside the init_work().

Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: add missing capabilities for DBDC

This improves performance for second phy.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: fix the possible device hang in high traffic

Use the additional memory barrier to ensure the skb list up-to-date
between the skb producer and consumer to avoid the invalid skb content
written into sdio controller and then cause device hang due to mcu assert
caught by WR_TIMEOUT_INT.

Fixes: 1522ff731f84 ("mt76: mt7663s: introduce sdio tx aggregation")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation

Each packet should be padded with the additional zero to become 4-bytes
alignment in sdio tx aggregation.

Fixes: 1522ff731f84 ("mt76: mt7663s: introduce sdio tx aggregation")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7663: fix when beacon filter is being applied

HW beacon filter command is being applied until we're in associated state
because the command would rely on the associated access point's beacon
interval and DTIM information.

Fixes: 7124198ab1a4 ("mt76: mt7615: enable beacon filtering by default for offload fw")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: check mcu returned values in mt7615_ops

Properly check returned values from mcu utility routines in
mt7615_ops.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: check mcu returned values in mt7915_ops

Properly check returned values from mcu utility routines in
mt7915_ops.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix txrate reporting

Properly check rate_info to fix unexpected reporting.

[ 1215.161863] Call trace:
[ 1215.164307]  cfg80211_calculate_bitrate+0x124/0x200 [cfg80211]
[ 1215.170139]  ieee80211s_update_metric+0x80/0xc0 [mac80211]
[ 1215.175624]  ieee80211_tx_status_ext+0x508/0x838 [mac80211]
[ 1215.181190]  mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e]
[ 1215.186580]  mt7915_mac_tx_free+0x324/0x7c0 [mt7915e]
[ 1215.191623]  mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e]
[ 1215.196582]  mt76_dma_cleanup+0x7b0/0x11d0 [mt76]
[ 1215.201276]  __napi_poll+0x38/0xf8
[ 1215.204668]  napi_workfn+0x40/0x80
[ 1215.208062]  process_one_work+0x1fc/0x390
[ 1215.212062]  worker_thread+0x48/0x4d0
[ 1215.215715]  kthread+0x120/0x128
[ 1215.218935]  ret_from_fork+0x10/0x1c

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: e4c5ead632ff ("mt76: mt7915: rename mt7915_mcu_get_rate_info to mt7915_mcu_get_tx_rate")
Reported-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix rxrate reporting

Avoid directly updating sinfo->rxrate from firmware since rate_info might
be overwritten by wrong results even mt7915_mcu_get_rx_rate() fails check.

Add more error handlings accordingly.

Fixes: 11553d88d0b9 ("mt76: mt7915: query station rx rate from firmware")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1

There are two variants of TP-Link Archer T2UHP V1, which are US and UN:

https://www.tp-link.com/us/support/download/archer-t2uhp/
https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/

From the driver source code provided by the vendor:

https://www.tp-link.com/hk/support/download/archer-t2uhp/v1/#Driver

eric@eric-VirtualBox:~/src$ grep -n USB_DEVICE.*0x2357 DPA_mt7610u_wifi_sta_v3004_rev1_20140529/NETIF/common/rtusb_dev_id.c
45: {USB_DEVICE(0x2357,0x0105)}, /* T1Uv1 */
46: {USB_DEVICE(0x2357,0x010B)}, /* T2UHP_UN_v1 */
47: {USB_DEVICE(0x2357,0x0123)}, /* T2UHP_US_v1 */

eric@eric-VirtualBox:~/src$ lsusb -d 2357:
Bus 001 Device 003: ID 2357:010b TP-Link WiFi
eric@eric-VirtualBox:~/src$ sudo modprobe mt76x0u
eric@eric-VirtualBox:~/src$ sudo sh -c "echo 2357 010b > /sys/bus/usb/drivers/mt76x0u/new_id"

[snip]

eric@eric-VirtualBox:~/src$ ifconfig -a
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        ether 08:00:27:74:d9:ee  txqueuelen 1000  (Ethernet)
        RX packets 78  bytes 16146 (16.1 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 75  bytes 8413 (8.4 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 56  bytes 5496 (5.4 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 56  bytes 5496 (5.4 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlx18d6c71b6e3e: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.106  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::21c7:2d90:e47d:ee48  prefixlen 64  scopeid 0x20<link>
        ether 18:d6:c7:1b:6e:3e  txqueuelen 1000  (Ethernet)
        RX packets 37  bytes 5345 (5.3 KB)
        RX errors 0  dropped 7  overruns 0  frame 0
        TX packets 77  bytes 10513 (10.5 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eric@eric-VirtualBox:~/src$ dmesg | tail -n 30
               12:51:25.551584 main     Log opened 2021-03-01T12:51:25.551572000Z
[   46.855763] 12:51:25.551995 main     OS Product: Linux
[   46.855838] 12:51:25.552075 main     OS Release: 5.4.0-66-generic
[   46.855897] 12:51:25.552150 main     OS Version: #74-Ubuntu SMP Wed Jan 27 22:54:38 UTC 2021
[   46.855971] 12:51:25.552207 main     Executable: /opt/VBoxGuestAdditions-6.1.16/sbin/VBoxService
               12:51:25.552208 main     Process ID: 898
               12:51:25.552209 main     Package type: LINUX_64BITS_GENERIC
[   46.858699] 12:51:25.554921 main     6.1.16 r140961 started. Verbose level = 0
[   46.863116] 12:51:25.559319 main     vbglR3GuestCtrlDetectPeekGetCancelSupport: Supported (#1)
[  140.687550] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[  140.838279] usb 1-2: New USB device found, idVendor=2357, idProduct=010b, bcdDevice= 1.00
[  140.838281] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  140.838283] usb 1-2: Product: WiFi
[  140.838284] usb 1-2: Manufacturer: MediaTek
[  140.838285] usb 1-2: SerialNumber: 1.0
[  178.374187] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  178.378370] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  178.417507] usbcore: registered new interface driver mt76x0u
[  178.557165] usb 1-2: reset high-speed USB device number 3 using xhci_hcd
[  178.720436] mt76x0u 1-2:1.0: ASIC revision: 76100002 MAC revision: 76502000
[  180.156077] mt76x0u 1-2:1.0: EEPROM ver:02 fae:04
[  181.190558] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  181.225560] mt76x0u 1-2:1.0 wlx18d6c71b6e3e: renamed from wlan0
[  188.660826] wlx18d6c71b6e3e: authenticate with d0:17:c2:e0:d7:9c
[  189.447781] wlx18d6c71b6e3e: send auth to d0:17:c2:e0:d7:9c (try 1/3)
[  189.618282] wlx18d6c71b6e3e: authenticated
[  189.619008] wlx18d6c71b6e3e: associate with d0:17:c2:e0:d7:9c (try 1/3)
[  189.715268] wlx18d6c71b6e3e: RX AssocResp from d0:17:c2:e0:d7:9c (capab=0x1011 status=0 aid=8)
[  189.734720] wlx18d6c71b6e3e: associated
[  190.233239] IPv6: ADDRCONF(NETDEV_CHANGE): wlx18d6c71b6e3e: link becomes ready

Signed-off-by: Eric Y.Y. Wong <eric.wongyeungyan@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix PHY mode for DBDC

Fix PHY mode configuration for DBDC.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: stop ext_phy queue when mac reset happens

Stop Tx burst for ext_phy after mac reset.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix CSA notification for DBDC

Add CSA notification for second phy.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: stop ext_phy queue when mac reset happens

Stop Tx burst for ext_phy after mac reset.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix CSA notification for DBDC

Add CSA notification for second phy.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add missing capabilities for DBDC

This improves dbdc performance.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: check mcu returned values in mt7921_start

Properly check returned values from mcu utility routines in
mt7921_start.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix the base of the dynamic remap

We should change the base for the dynamic remap into another one, because
the current base (0xe0000) have been the one used to operate the device
ownership.

Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix the base of PCIe interrupt

Should use 0x10000 as the base to operate PCIe interrupt according
to the vendor reference driver.

Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: get rid of mt7921_sta_rc_update routine

Since the rate selection is currently managed by the fw, get rid of
empty mt7921_sta_rc_update routine

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list

Since mt76_txq_send_burst routine can report a negative error code,
check the returned value before incrementing the number of transmitted
frames in mt76_txq_schedule_list routine.
Return -EBUSY directly if the device is in reset or in power management.

Fixes: 90fdc1717b186 ("mt76: use mac80211 txq scheduling")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: fix kernel warning adding monitor interface

Fix the following kernel warning adding a monitor interface in
mt76_connac_mcu_uni_add_dev routine.

[  507.984882] ------------[ cut here ]------------
[  507.989515] WARNING: CPU: 1 PID: 3017 at mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[  508.059379] CPU: 1 PID: 3017 Comm: ifconfig Not tainted 5.4.98 #0
[  508.065461] Hardware name: MT7622_MT7531 RFB (DT)
[  508.070156] pstate: 80000005 (Nzcv daif -PAN -UAO)
[  508.074939] pc : mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[  508.081806] lr : mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e]
[  508.087367] sp : ffffffc013a33930
[  508.090671] x29: ffffffc013a33930 x28: ffffff801e628ac0
[  508.095973] x27: ffffff801c7f1200 x26: ffffff801c7eb008
[  508.101275] x25: ffffff801c7eaef0 x24: ffffff801d025610
[  508.106577] x23: ffffff801d022990 x22: ffffff801d024de8
[  508.111879] x21: ffffff801d0226a0 x20: ffffff801c7eaee8
[  508.117181] x19: ffffff801d0226a0 x18: 000000005d00b000
[  508.122482] x17: 00000000ffffffff x16: 0000000000000000
[  508.127785] x15: 0000000000000080 x14: ffffff801d704000
[  508.133087] x13: 0000000000000040 x12: 0000000000000002
[  508.138389] x11: 000000000000000c x10: 0000000000000000
[  508.143691] x9 : 0000000000000020 x8 : 0000000000000001
[  508.148992] x7 : 0000000000000000 x6 : 0000000000000000
[  508.154294] x5 : ffffff801c7eaee8 x4 : 0000000000000006
[  508.159596] x3 : 0000000000000001 x2 : 0000000000000000
[  508.164898] x1 : ffffff801c7eac08 x0 : ffffff801d0226a0
[  508.170200] Call trace:
[  508.172640]  mt76_connac_mcu_uni_add_dev+0x178/0x190 [mt76_connac_lib]
[  508.179159]  mt7921_eeprom_init+0x1288/0x1cb8 [mt7921e]
[  508.184394]  drv_add_interface+0x34/0x88 [mac80211]
[  508.189271]  ieee80211_add_virtual_monitor+0xe0/0xb48 [mac80211]
[  508.195277]  ieee80211_do_open+0x86c/0x918 [mac80211]
[  508.200328]  ieee80211_do_open+0x900/0x918 [mac80211]
[  508.205372]  __dev_open+0xcc/0x150
[  508.208763]  __dev_change_flags+0x134/0x198
[  508.212937]  dev_change_flags+0x20/0x60
[  508.216764]  devinet_ioctl+0x3e8/0x748
[  508.220503]  inet_ioctl+0x1e4/0x350
[  508.223983]  sock_do_ioctl+0x48/0x2a0
[  508.227635]  sock_ioctl+0x310/0x4f8
[  508.231116]  do_vfs_ioctl+0xa4/0xac0
[  508.234681]  ksys_ioctl+0x44/0x90
[  508.237985]  __arm64_sys_ioctl+0x1c/0x48
[  508.241901]  el0_svc_common.constprop.1+0x7c/0x100
[  508.246681]  el0_svc_handler+0x18/0x20
[  508.250421]  el0_svc+0x8/0x1c8
[  508.253465] ---[ end trace c7b90fee13d72c39 ]---
[  508.261278] ------------[ cut here ]------------

Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix mib stats counter reporting to mac80211

In order to properly report MIB counters to mac80211, resets stats in
mt7915_get_stats routine() and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7915_mac_update_mib_stats routine.

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix mib stats counter reporting to mac80211

In order to properly report MIB counters to mac80211, resets stats in
mt7615_get_stats routine and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7615_mac_update_mib_stats routine.

Fixes: c388d8584bc83 ("mt76: mt7615: add a get_stats() callback")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: remove hdr->fw_ver check

Only mt7615 uses v1 version. Also, some of released firmware doesn't
have hdr->fw_ver.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix TSF configuration

The index of TSF counters should follow HWBSSID.

Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix stats register definitions

Fix register definitions for mac80211 stats reporting.
Move mib counter reset to mt7921_get_stats routine.

Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: remove unneeded semicolon

Fix the following coccicheck warnings:

./drivers/net/wireless/mediatek/mt76/mt7921/mac.c:1402:2-3: Unneeded
semicolon.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix aggr len debugfs node

Similar to mt7921, fix 802.11 aggr len debugfs reporting for mt7915 driver.

Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix aggr length histogram

Fix register definitions for 802.11 aggr length histogram estimation.

Fixes: 474a9f21e2e2 ("mt76: mt7921: add debugfs support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix memory leak in mt7615_coredump_work

Similar to the issue fixed in mt7921_coredump_work, fix a possible memory
leak in mt7615_coredump_work routine.

Fixes: d2bf7959d9c0f ("mt76: mt7663: introduce coredump support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: add support for rx decapsulation offload

For AP and Client mode, the hardware can pass received packets
as 802.3 frames that can be passed to the network stack as-is.

Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: add rx checksum offload support

Set skb->ip_summed to CHECKSUM_UNNECESSARY if the hardware has validated
the IP and TCP/UDP checksum

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: enable hw rx-amsdu de-aggregation

Enable hw rx-amsdu de-aggregation support.
This is a preliminary patch to enable rx checksum offload.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: use threaded NAPI

With threaded NAPI, the rx handler function is no longer bound to the CPU that
fired the interrupt, which significantly helps to spread the workload over
multiple CPUs, especially when multiple devices are using threaded NAPI at the
same time.
Exclude the tx handler from threaded NAPI by using a separate dummy netdev.
The work is small and short-lived enough that it makes more sense to run it in
softirq instead of creating a dedicated thread

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: update sched_scan cmd usage

Update sched_scan command usage according to the current firmware
submitted into linux-firmware.git.

Fixes: 80fc1e37c0eb ("mt76: mt7921: rely on mt76_connac_mcu module for sched_scan and hw_scan")
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: add flush operation

add flush operation to make sure cfg80211_mlme_deauth is able to flush
the deauthtication frame into air immediately.

Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fixup rx bitrate statistics

Since the related rx bitrate fields have been moved to group3 in Rxv,
fix rx bitrate statistics in mt7921_mac_fill_rx routine.

Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: fix up the setting for ht40 mode in mt76_connac_mcu_uni_add_bss

Use proper value for ht40 mode configuration in mt76_connac_mcu_uni_add_bss
routine and not ht20 one

Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Co-developed-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Soul Huang <Soul.Huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: switch to new api for hardware beacon filter

Current firmware only supports new api for enabling hardware beacon filter.

Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support")
Beacon filter cmd have to rely on the associatied access point's beacon
interval and DTIM information.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix memory leak in mt7921_coredump_work

Fix possible memory leak in mt7921_coredump_work.

Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: fix suspend/resume sequence

Any pcie access should happen in pci D0 state and we should give ownership
back to the device at the end of the suspend procedure.

Fixes: 1d8efc741df80 ("mt76: mt7921: introduce Runtime PM support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: use PCI_VENDOR_ID_MEDIATEK to avoid open coded

Use PCI standard defines.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: always check return value from mt7915_mcu_alloc_wtbl_req

As done for mt76_connac_mcu_alloc_wtbl_req, even if this is not a real
bug since mt7915_mcu_alloc_wtbl_req routine can fails just if nskb is NULL,
always check return value from mt7915_mcu_alloc_wtbl_req in order to avoid
possible future mistake.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: connac: always check return value from mt76_connac_mcu_alloc_wtbl_req

Even if this is not a real bug since mt76_connac_mcu_alloc_wtbl_req routine
can fails just if nskb is NULL , always check return value from
mt76_connac_mcu_alloc_wtbl_req in order to avoid possible future
mistake.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt76x0: disable GTK offloading

When operating two VAP on a MT7610 with encryption (PSK2, SAE, OWE),
only the first one to be created will transmit properly encrypteded
frames.

All subsequently created VAPs will sent out frames with the payload left
unencrypted, breaking multicast traffic (ICMP6 NDP) and potentially
disclosing information to a third party.

Disable GTK offloading and encrypt these frames in software to
circumvent this issue. THis only seems to be necessary on MT7610 chips,
as MT7612 is not affected from our testing.

Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: always use WTBL_MAX_SIZE for tlv allocation

Simplify WTBL defines.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: removed unused definitions in mcu.h

Get rid of the following definitions in mt7921/mcu.h since they are not
actually used:
- MT7921_WTBL_UPDATE_MAX_SIZE
- MT7921_STA_UPDATE_MAX_SIZE
- MT7921_WTBL_UPDATE_BA_SIZE

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: remove unnecessary variable

In mt7921_pm_set() the variable "ret" is initialized to zero
and then returned. Remove it and return zero.

Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7921: enable random mac addr during scanning

Notify mac80211 mt7921 devices support random mac address during hw
frequency scanning

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: support loading EEPROM for MT7613BE

EEPROM blobs for MT7613BE radios start with (little endian) 0x7663,
which is also the PCI device ID for this device. The EEPROM is required
for the radio to work at useful power levels, otherwise only the lowest
power level is available.

Suggested-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: fix tx skb dma unmap

The first pointer in the txp needs to be unmapped as well, otherwise it will
leak DMA mapping entries

Reported-by: Ben Greear <greearb@candelatech.com>
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix tx skb dma unmap

The first pointer in the txp needs to be unmapped as well, otherwise it will
leak DMA mapping entries

Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915")
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7615: fix key set/delete issues

There were multiple issues in the current key set/remove code:
- deleting a key with the previous key index deletes the current key
- BIP key would only be uploaded correctly initially and corrupted on rekey

Rework the code to better keep track of multiple keys and check for the
key index before deleting the current key

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add support for rx decapsulation offload

For AP and Client mode, the hardware can pass received packets as 802.3 frames
that can be passed to the network stack as-is.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: add rx checksum offload support

Set skb->ip_summed to CHECKSUM_UNNECESSARY if the hardware has validated
the IP and TCP/UDP checksum

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7915: enable hw rx-amsdu de-aggregation

Enable hw rx-amsdu de-aggregation support available in 7915 devices.
This is a preliminary patch to enable rx checksum offload

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add support for 802.3 rx frames

Do not try to access the header when receiving them

Signed-off-by: Felix Fietkau <nbd@nbd.name>

iwlegacy: avoid -Wempty-body warning

There are a couple of warnings in this driver when building with W=1:

drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_power_set_mode':
drivers/net/wireless/intel/iwlegacy/common.c:1195:60: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
 1195 |                                 il->chain_noise_data.state);
      |                                                            ^
drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_do_scan_abort':
drivers/net/wireless/intel/iwlegacy/common.c:1343:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]

Change the empty debug macros to no_printk(), which avoids the
warnings and adds useful format string checks.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210322104343.948660-3-arnd@kernel.org

mt7601u: enable TDLS support

Notify mac80211 the mt7601u chipset support 802.11 TDLS. The feature has
been tested with a mt7610u peer.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/8f9fd662cdbbb70ba896f1bea80e696b15011d3f.1614536496.git.lorenzo@kernel.org

mt7601u: fix always true expression

Currently the expression ~nic_conf1 is always true because nic_conf1
is a u16 and according to 6.5.3.3 of the C standard the ~ operator
promotes the u16 to an integer before flipping all the bits. Thus
the top 16 bits of the integer result are all set so the expression
is always true.  If the intention was to flip all the bits of nic_conf1
then casting the integer result back to a u16 is a suitabel fix.

Interestingly static analyzers seem to thing a bitwise ! should be
used instead of ~ for this scenario, so I think the original intent
of the expression may need some extra consideration.

Addresses-Coverity: ("Logical vs. bitwise operator")
Fixes: c869f77d6abb ("add mt7601u driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com

rtw88: Fix an error code in rtw_debugfs_set_rsvd_page()

The sscanf() function returns the number of matches (0 or 1 in this
case).  It doesn't return error codes.  We should return -EINVAL if the
string is invalid

Fixes: c376c1fc87b7 ("rtw88: add h2c command in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YE8nmatMDBDDWkjq@mwanda

rtw88: coex: fix A2DP stutters while WL busy + WL scan

While WL scan, WL is more high priority than BT. The packets from AP
will be a big interference to A2DP. It will lead to A2DP stutters. Stop
answering CTS to AP to decrease AP's packets Tx while WL scan + WL busy.
Enable BT AFH feature to make BT leave away from WL channel.

Desired BT firmware BT-COEX version: 0x1c
Desired WL firmware version: 9.9.x

Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210319054218.3319-8-pkshih@realtek.com

rtw88: 8822c: add LC calibration for RTL8822C

Fix power tracking issue by replacing unnecessary IQ calibration
with LC calibration.
When thermal difference exceeds limitation, let RF circuit adjsut
its characteristic to fit in current environment.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210319054218.3319-6-pkshih@realtek.com

rtw88: 8822c: update tx power limit table to RF v40.1

update tx power limits to RF v40 and apply fix on FCC's channel 12 and 13,
so change the patch level to 1.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210319054218.3319-5-pkshih@realtek.com

rtw88: fix DIG min setting

DIG min is expected to be set according to chip. And actually we assigned
it under each chip information. However, we didn't use the setting when we
did DIG process. It is unexpected, so we fix it.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210319054218.3319-4-pkshih@realtek.com

rtw88: add flush hci support

Though mac queue flushing has been supported, sometimes data may be waiting
on interface from host to chip. If it occurs, there may still be data that
flows into mac just after we do flush. To avoid that, we add the hci part
of flushing.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210319054218.3319-2-pkshih@realtek.com

rtw88: 8822c: support FW crash dump when FW crash

Although FW crash logs are already supported for dumping in driver, the
logs may not be sufficient to analyze field issues. To improve this part,
we add a support to dump FW memory.

When driver receives FW crash notifications, driver uses DDMA, which is a
HW ability, to copy specified FW memory to FW fifo. Driver can then dump
these information from FW fifo. With this support, not only FW crash log
but also specified FW memory will be dumped while FW crash. Besides,
specified registers are also dumped.

This feature is implemeted on 8822C first due to difference of FW layouts
between ICs. In addition, we add a debugfs to trigger FW crash. It can
simulate the process of crash, dump and reset. Through it, we can also
check if a reset is ongoing.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210309060121.9099-1-pkshih@realtek.com