review.tizen.org Git - platform/kernel/linux-starfive.git/log

media: ti: cal: fix possible memory leak in cal_ctx_create()

[ Upstream commit 7acd650a0484d92985a0d6d867d980c6dd019885 ]

The memory of ctx is allocated in cal_ctx_create(), but it will
not be freed when cal_ctx_v4l2_init() fails, so add kfree() when
cal_ctx_v4l2_init() fails to fix it.

Fixes: d68a94e98a89 ("media: ti-vpe: cal: Split video device initialization and registration")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers

[ Upstream commit 57f72170a2b2a362c35bb9407fc844eac5afdec1 ]

Any access to the dynamically allocated metadata region by the application
processor after assigning it to the remote Q6 will result in a XPU
violation. Fix this by replacing the dynamically allocated memory region
with a no-map carveout and unmap the modem metadata memory region before
passing control to the remote Q6.

Reported-and-tested-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-7-quic_sibis@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"

[ Upstream commit a899d542b687c9b04ccbd9eefabc829ba5fef791 ]

This reverts commit fc156629b23a21181e473e60341e3a78af25a1d4.

This commit manages to do three API violations at once:

- dereference the return value of dma_alloc_attrs with the
   DMA_ATTR_NO_KERNEL_MAPPING mapping, which is clearly forbidden and
   will do the wrong thing on various dma mapping implementations.  The
   fact that dma-direct uses a struct page as a cookie is an undocumented
   implementation detail
- include dma-map-ops.h and use pgprot_dmacoherent despite a clear
   comment documenting that this is not acceptable
- use of the VM_DMA_COHERENT for something that is not the dma-mapping
   code
- use of VM_FLUSH_RESET_PERMS for vmap, while it is only supported for
   vmalloc

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085840.32356-6-quic_sibis@quicinc.com
Stable-dep-of: 57f72170a2b2 ("remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors

[ Upstream commit fd8958efe8779d3db19c9124fce593ce681ac709 ]

Fix three sources of error involving struct sdma_txreq.num_descs.

When _extend_sdma_tx_descs() extends the descriptor array, it uses the
value of tx->num_descs to determine how many existing entries from the
tx's original, internal descriptor array to copy to the newly allocated
one. As this value was incremented before the call, the copy loop will
access one entry past the internal descriptor array, copying its contents
into the corresponding slot in the new array.

If the call to _extend_sdma_tx_descs() fails, _pad_smda_tx_descs() then
invokes __sdma_tx_clean() which uses the value of tx->num_desc to drive a
loop that unmaps all descriptor entries in use. As this value was
incremented before the call, the unmap loop will invoke sdma_unmap_desc()
on a descriptor entry whose contents consist of whatever random data was
copied into it during (1), leading to cascading further calls into the
kernel and driver using arbitrary data.

_sdma_close_tx() was using tx->num_descs instead of tx->num_descs - 1.

Fix all of the above by:
- Only increment .num_descs after .descp is extended.
- Use .num_descs - 1 instead of .num_descs for last .descp entry.

Fixes: f4d26d81ad7f ("staging/rdma/hfi1: Add coalescing support for SDMA TX descriptors")
Link: https://lore.kernel.org/r/167656658879.2223096.10026561343022570690.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Fix math bugs in hfi1_can_pin_pages()

[ Upstream commit a0d198f79a8d033bd46605b779859193649f1f99 ]

Fix arithmetic and logic errors in hfi1_can_pin_pages() that would allow
hfi1 to attempt pinning pages in cases where it should not because of
resource limits or lack of required capability.

Fixes: 2c97ce4f3c29 ("IB/hfi1: Add pin query function")
Link: https://lore.kernel.org/r/167656658362.2223096.10954762619837718026.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Patrick Kelsey <pat.kelsey@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix missing memory barriers in rxe_queue.h

[ Upstream commit a77a52385e9a761f896a88a4162e69fb7ccafe3f ]

An earlier patch which introduced smp_load_acquire/smp_store_release
into rxe_queue.h incorrectly assumed that surrounding spin-locks in
rxe_verbs.c around queue updates for kernel ulps was sufficient to
protect the passing of data through the queues between the ulp and
the rxe tasklets. But this was incorrect. The typical sequence was

ulp rxe requester tasklet
------------------------ ---------------------
spin_lock_irqsave() wqe = queue_head(queue)
if (!queue_full(q)) { if (!wqe)
spin_unlock_irqrestore return;
return -ENOMEM
} <process wqe>
wqe = queue_producer_addr(q)
<fill in wqe> queue_advance_consumer(queue)
queue_advance_producer(q)
spin_unlock_irqrestore()

queue_head() calls queue_empty() which calls smp_load_acquire()
For user space apps queue_advance_producer() calls smp_store_release()
so that there is a memory barrier between the producer and the
consumer but for kernel ulps queue_advance_produce() just incremented
the producer index because the lock function is a release function.
But to work the barrier has to come between filling in the wqe and
updating the producer index. This patch adds the missing barriers.
It also changes the enum names for the ulp queue types to
QUEUE_TYPE_FROM/TO_ULP instead of QUEUE_TYPE_TO/FROM_DRIVER
which is very ambiguous. This bug is suspected as the cause of very
rare lockups in a very high scale storage application. It is a bug
in any case and should be corrected.

Fixes: 0a67c46d2e99 ("RDMA/rxe: Protect user space index loads/stores")
Link: https://lore.kernel.org/r/20230214071053.5395-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: cleanup some error handling in rxe_verbs.c

[ Upstream commit 692373d186205dfb1b56f35f22702412d94d9420 ]

Instead of 'goto and return', just return directly to
simplify the error handling, and avoid some unnecessary
return value check.

Link: https://lore.kernel.org/r/20221028075053.3990467-1-xuhaoyue1@hisilicon.com
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: a77a52385e9a ("RDMA/rxe: Fix missing memory barriers in rxe_queue.h")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Allow to use flush-queue when first level is default

[ Upstream commit 257ec290741924f8df678927d0dfecb1deebb9c5 ]

Commit 29b32839725f ("iommu/vt-d: Do not use flush-queue when caching-mode
is on") forced default domains to be strict mode as long as IOMMU
caching-mode is flagged. The reason for doing this is that when vIOMMU
uses VT-d caching mode to synchronize shadowing page tables, the strict
mode shows better performance.

However, this optimization is orthogonal to the first-level page table
because the Intel VT-d architecture does not define the caching mode of
the first-level page table. Refer to VT-d spec, section 6.1, "When the
CM field is reported as Set, any software updates to remapping
structures other than first-stage mapping (including updates to not-
present entries or present entries whose programming resulted in
translation faults) requires explicit invalidation of the caches."
Exclude the first-level page table from this optimization.

Generally using first-stage translation in vIOMMU implies nested
translation enabled in the physical IOMMU. In this case the first-stage
page table is wholly captured by the guest. The vIOMMU only needs to
transfer the cache invalidations on vIOMMU to the physical IOMMU.
Forcing the default domain to strict mode will cause more frequent
cache invalidations, resulting in performance degradation. In a real
performance benchmark test measured by iperf receive, the performance
result on Sapphire Rapids 100Gb NIC shows:
w/ this fix ~51 Gbits/s, w/o this fix ~39.3 Gbits/s.

Theoretically a first-stage IOMMU page table can still be shadowed
in absence of the caching mode, e.g. with host write-protecting guest
IOMMU page table to synchronize changed PTEs with the physical
IOMMU page table. In this case the shadowing overhead is decoupled
from emulating IOTLB invalidation then the overhead of the latter part
is solely decided by the frequency of IOTLB invalidations. Hence
allowing guest default dma domain to be lazy can also benefit the
overall performance by reducing the total VM-exit numbers.

Fixes: 29b32839725f ("iommu/vt-d: Do not use flush-queue when caching-mode is on")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230214025618.2292889-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix error handling in sva enable/disable paths

[ Upstream commit 60b1daa3b168fbc648ae2ad28a84759223e49e18 ]

Roll back all previous actions in error paths of intel_iommu_enable_sva()
and intel_iommu_disable_sva().

Fixes: d5b9e4bfe0d8 ("iommu/vt-d: Report prq to io-pgfault framework")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230208051559.700109-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ptdma: check for null desc before calling pt_cmd_callback

[ Upstream commit 928469986171a6f763b34b039427f5667ba3fd50 ]

Resolves a panic that can occur on AMD systems, typically during host
shutdown, after the PTDMA driver had been exercised. The issue was
the pt_issue_pending() function is mistakenly assuming that there will
be at least one descriptor in the Submitted queue when the function
is called. However, it is possible that both the Submitted and Issued
queues could be empty, which could result in pt_cmd_callback() being
mistakenly called with a NULL pointer.
Ref: Bugzilla Bug 216856.

Fixes: 6fa7e0e836e2 ("dmaengine: ptdma: fix concurrency issue with multiple dma transfer")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230210075142.58253-1-epilmore@gigaio.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dw-axi-dmac: Do not dereference NULL structure

[ Upstream commit be4d46edeee4b2459d2f53f37ada88bbfb634b6c ]

If "vdesc" is NULL, it cannot be used with vd_to_axi_desc(). Leave
"bytes" unchanged at 0. Seen under GCC 13 with -Warray-bounds:

../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c: In function 'dma_chan_tx_status':
../drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c:329:46: warning: array subscript 0 is outside array bounds of 'struct
virt_dma_desc[46116860184273879]' [-Warray-bounds=]
329 | bytes = vd_to_axi_desc(vdesc)->length;
| ^~

Fixes: 8e55444da65c ("dmaengine: dw-axi-dmac: Support burst residue granularity")
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230127223623.never.507-kees@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: sf-pdma: pdma_desc memory leak fix

[ Upstream commit b02e07015a5ac7bbc029da931ae17914b8ae0339 ]

Commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a
DMA channel") changed sf_pdma_prep_dma_memcpy() to unconditionally
allocate a new sf_pdma_desc each time it is called.

The driver previously recycled descs, by checking the in_use flag, only
allocating additional descs if the existing one was in use. This logic
was removed in commit b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread
support for a DMA channel"), but sf_pdma_free_desc() was not changed to
handle the new behaviour.

As a result, each time sf_pdma_prep_dma_memcpy() is called, the previous
descriptor is leaked, over time leading to memory starvation:

  unreferenced object 0xffffffe008447300 (size 192):
  comm "irq/39-mchp_dsc", pid 343, jiffies 4294906910 (age 981.200s)
  hex dump (first 32 bytes):
    00 00 00 ff 00 00 00 00 b8 c1 00 00 00 00 00 00  ................
    00 00 70 08 10 00 00 00 00 00 00 c0 00 00 00 00  ..p.............
  backtrace:
    [<00000000064a04f4>] kmemleak_alloc+0x1e/0x28
    [<00000000018927a7>] kmem_cache_alloc+0x11e/0x178
    [<000000002aea8d16>] sf_pdma_prep_dma_memcpy+0x40/0x112

Add the missing kfree() to sf_pdma_free_desc(), and remove the redundant
in_use flag.

Fixes: b2cc5c465c2c ("dmaengine: sf-pdma: Add multithread support for a DMA channel")
Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230120100623.3530634-1-shravan.chippa@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Do not identity map v2 capable device when snp is enabled

[ Upstream commit 18792e99ea2fea27c72eb1ecca1879e5e6be304d ]

Flow:
  - Booted system with SNP enabled, memory encryption off and
    IOMMU DMA translation mode
  - AMD driver detects v2 capable device and amd_iommu_def_domain_type()
    returns identity mode
  - amd_iommu_domain_alloc() returns NULL an SNP is enabled
  - System will fail to register device

On SNP enabled system, passthrough mode is not supported. IOMMU default
domain is set to translation mode. We need to return zero from
amd_iommu_def_domain_type() so that it allocates translation domain.

Fixes: fb2accadaa94 ("iommu/amd: Introduce function to check and enable SNP")
CC: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230207091752.7656-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: Fix error unwind in iommu_group_alloc()

[ Upstream commit 4daa861174d56023c2068ddb03de0752f07fa199 ]

If either iommu_group_grate_file() fails then the
iommu_group is leaked.

Destroy it on these error paths.

Found by kselftest/iommu/iommufd_fail_nth

Fixes: bc7d12b91bd3 ("iommu: Implement reserved_regions iommu-group sysfs file")
Fixes: c52c72d3dee8 ("iommu: Add sysfs attribyte for domain type")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-8f616bee028d+8b-iommu_group_alloc_leak_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()

[ Upstream commit 4ca446b127c568b59cb8d9748b6f70499624bb18 ]

This condition needs to match the previous "if (epcp->state == LISTEN) {"
exactly to avoid a NULL dereference of either "listen_ep" or "ep". The
problem is that "epcp" has been re-assigned so just testing
"if (epcp->state == LISTEN) {" a second time is not sufficient.

Fixes: 116aeb887371 ("iw_cxgb4: provide detailed provider-specific CM_ID information")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y+usKuWIKr4dimZh@kili
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom: Fix host-init error handling

[ Upstream commit 997e010de9134474dbfde52be03efd7d1bce902d ]

Implement the new host_deinit() callback so that the PHY is powered off
and regulators and clocks are disabled also on late host-init errors.

Link: https://lore.kernel.org/r/20221017114705.8277-2-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: rockchip-typec: fix tcphy_get_mode error case

[ Upstream commit 4ca651df07183e29cdad7272255e23aec0169a1b ]

The existing logic in tcphy_get_mode() can cause the phy to be
incorrectly configured to USB UFP or DisplayPort mode when
extcon_get_state returns an error code.

extcon_get_state() can return 0, 1, or a negative error code.

It is possible to get into the failing state with an extcon driver
which does not support the extcon connector id specified as the
second argument to extcon_get_state().

tcphy_get_mode()
->extcon_get_state()
-->find_cable_index_by_id()
--->return -EINVAL;

Fixes: e96be45cb84e ("phy: Add USB Type-C PHY driver for rk3399")
Signed-off-by: Neill Kapron <nkapron@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230126001013.3707873-1-nkapron@google.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Fix dropping valid root bus resources with .end = zero

[ Upstream commit 9d8ba74a181b1c81def21168795ed96cbe6f05ed ]

On r8a7791/koelsch:

  kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
  # cat /sys/kernel/debug/kmemleak
  unreferenced object 0xc3a34e00 (size 64):
    comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s)
    hex dump (first 32 bytes):
      b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00  .]...]..........
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<fe3aa979>] __kmalloc+0xf0/0x140
      [<34bd6bc0>] resource_list_create_entry+0x18/0x38
      [<767046bc>] pci_add_resource_offset+0x20/0x68
      [<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390

When coalescing two resources for a contiguous aperture, the second
resource is enlarged to cover the full contiguous range, while the first
resource is marked invalid.  This invalidation is done by clearing the
flags, start, and end members.

When adding the initial resources to the bus later, invalid resources are
skipped.  Unfortunately, the check for an invalid resource considers only
the end member, causing false positives.

E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no
longer registered with pci_bus_insert_busn_res() (causing the memory leak),
nor printed:

   pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges:
   pci-rcar-gen2 ee090000.pci:      MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000
   pci-rcar-gen2 ee090000.pci: PCI: revision 11
   pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
  -pci_bus 0000:00: root bus resource [bus 00]
   pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff]

Fix this by only skipping resources where all of the flags, start, and end
members are zero.

Fixes: 7c3855c423b17f6c ("PCI: Coalesce host bridge contiguous apertures")
Link: https://lore.kernel.org/r/da0fcd5e86c74239be79c7cb03651c0fce31b515.1676036673.git.geert+renesas@glider.be
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dw-edma: Fix readq_ch() return value truncation

[ Upstream commit 5fdca4a995bcd4cf61bda40af154a730589dc524 ]

Previously, readq_ch() did a 64-bit readq(), but truncated the result by
storing it in the u32 "value". Change "value" to u64 to avoid the
truncation.

Note: the method is currently unused, so the bug hasn't caused any problem
so far.

Fixes: 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev

[ Upstream commit e2ffae3ed92a9f768902c1cf82642c3a09cd0345 ]

This sets both of_node fields and takes a of_node reference as well.

Fixes: bb160ee61c04 ("drivers/usb/host/ehci-fsl: Fix interrupt setup in host mode.")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207110531.1060252-4-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: mtdpart: Don't create platform device that'll never probe

[ Upstream commit fb42378dcc7f247df56f0ecddfdae85487495fbc ]

These "nvmem-cells" platform devices never get probed because there's no
platform driver for it and it's never used anywhere else. So it's a
waste of memory. These devices also cause fw_devlink to block nvmem
consumers of "nvmem-cells" partition from probing because the supplier
device never probes.

So stop creating platform devices for nvmem-cells partitions to avoid
wasting memory and to avoid blocking probing of consumers.

Reported-by: Maxim Kiselev <bigunclemax@gmail.com>
Fixes: bcdf0315a61a ("mtd: call of_platform_populate() for MTD partitions")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Maksim Kiselev <bigunclemax@gmail.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-13-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fw_devlink: Make cycle detection more robust

[ Upstream commit 3fb16866b51ded6c016b664caad53f8d4fd9dc56 ]

fw_devlink could only detect a single and simple cycle because it relied
mainly on device link cycle detection code that only checked for cycles
between devices. The expectation was that the firmware wouldn't have
complicated cycles and multiple cycles between devices. That expectation
has been proven to be wrong.

For example, fw_devlink could handle:

+-+        +-+
|A+------> |B+
+-+        +++
^          |
|          |
+----------+

But it couldn't handle even something as "simple" as:

+---------------------+
|                     |
v                     |
+-+        +-+        +++
|A+------> |B+------> |C|
+-+        +++        +-+
^          |
|          |
+----------+

But firmware has even more complicated cycles like:

    +---------------------+
    |                     |
    v                     |
   +-+       +---+       +++
+--+A+------>| B +-----> |C|<--+
|  +-+       ++--+       +++   |
|   ^         | ^         |    |
|   |         | |         |    |
|   +---------+ +---------+    |
|                              |
+------------------------------+

And this is without including parent child dependencies or nodes in the
cycle that are just firmware nodes that'll never have a struct device
created for them.

The proper way to treat these devices it to not force any probe ordering
between them, while still enforce dependencies between node in the
cycles (A, B and C) and their consumers.

So this patch goes all out and just deals with all types of cycles. It
does this by:

1. Following dependencies across device links, parent-child and fwnode
   links.
2. When it find cycles, it mark the device links and fwnode links as
   such instead of just deleting them or making the indistinguishable
   from proxy SYNC_STATE_ONLY device links.

This way, when new nodes get added, we can immediately find and mark any
new cycles whether the new node is a device or firmware node.

Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-9-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fw_devlink: Improve check for fwnode with no device/driver

[ Upstream commit 411c0d58ca6faa9bc4b9f5382118a31c7bb92a6f ]

fw_devlink shouldn't defer the probe of a device to wait on a supplier
that'll never have a struct device or will never be probed by a driver.
We currently check if a supplier falls into this category, but don't
check its ancestors. We need to check the ancestors too because if the
ancestor will never probe, then the supplier will never probe either.

Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fw_devlink: Consolidate device link flag computation

[ Upstream commit cd115c0409f283edde94bd5a9a42dc42bee0aba8 ]

Consolidate the code that computes the flags to be used when creating a
device link from a fwnode link.

Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-8-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle

[ Upstream commit 6a6dfdf8b3ff337be5a447e9f4e71969f18370ad ]

To improve detection and handling of dependency cycles, we need to be
able to mark fwnode links as being part of cycles. fwnode links marked
as being part of a cycle should not block their consumers from probing.

Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-7-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fw_devlink: Don't purge child fwnode's consumer links

[ Upstream commit 3a2dbc510c437ca392516b0105bad8e7970e6614 ]

When a device X is bound successfully to a driver, if it has a child
firmware node Y that doesn't have a struct device created by then, we
delete fwnode links where the child firmware node Y is the supplier. We
did this to avoid blocking the consumers of the child firmware node Y
from deferring probe indefinitely.

While that a step in the right direction, it's better to make the
consumers of the child firmware node Y to be consumers of the device X
because device X is probably implementing whatever functionality is
represented by child firmware node Y. By doing this, we capture the
device dependencies more accurately and ensure better
probe/suspend/resume ordering.

Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 6a6dfdf8b3ff ("driver core: fw_devlink: Allow marking a fwnode link as being part of a cycle")
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links

[ Upstream commit 67cad5c67019c38126b749621665b6723d3ae7e6 ]

fw_devlink uses DL_FLAG_SYNC_STATE_ONLY device link flag for two
purposes:

1. To allow a parent device to proxy its child device's dependency on a
   supplier so that the supplier doesn't get its sync_state() callback
   before the child device/consumer can be added and probed. In this
   usage scenario, we need to ignore cycles for ensure correctness of
   sync_state() callbacks.

2. When there are dependency cycles in firmware, we don't know which of
   those dependencies are valid. So, we have to ignore them all wrt
   probe ordering while still making sure the sync_state() callbacks
   come correctly.

However, when detecting dependency cycles, there can be multiple
dependency cycles between two devices that we need to detect. For
example:

A -> B -> A and A -> C -> B -> A.

To detect multiple cycles correct, we need to be able to differentiate
DL_FLAG_SYNC_STATE_ONLY device links used for (1) vs (2) above.

To allow this differentiation, add a DL_FLAG_CYCLE that can be use to
mark use case (2). We can then use the DL_FLAG_CYCLE to decide which
DL_FLAG_SYNC_STATE_ONLY device links to follow when looking for
dependency cycles.

Fixes: 2de9d8e0d2fe ("driver core: fw_devlink: Improve handling of cyclic dependencies")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # qcom/sm7225-fairphone-fp4
Link: https://lore.kernel.org/r/20230207014207.1678715-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: imx: disable Ageing Timer interrupt request irq

[ Upstream commit ef25e16ea9674b713a68c3bda821556ce9901254 ]

There maybe pending USR interrupt before requesting irq, however
uart_add_one_port has not executed, so there will be kernel panic:
[    0.795668] Unable to handle kernel NULL pointer dereference at virtual addre
ss 0000000000000080
[    0.802701] Mem abort info:
[    0.805367]   ESR = 0x0000000096000004
[    0.808950]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.814033]   SET = 0, FnV = 0
[    0.816950]   EA = 0, S1PTW = 0
[    0.819950]   FSC = 0x04: level 0 translation fault
[    0.824617] Data abort info:
[    0.827367]   ISV = 0, ISS = 0x00000004
[    0.831033]   CM = 0, WnR = 0
[    0.833866] [0000000000000080] user address but active_mm is swapper
[    0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[    0.845953] Modules linked in:
[    0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1
[    0.855617] Hardware name: Freescale i.MX8MP EVK (DT)
[    0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0
[    0.872283] lr : imx_uart_int+0xf8/0x1ec

The issue only happends in the inmate linux when Jailhouse hypervisor
enabled. The test procedure is:
while true; do
jailhouse enable imx8mp.cell
jailhouse cell linux xxxx
sleep 10
jailhouse cell destroy 1
jailhouse disable
sleep 5
done

And during the upper test, press keys to the 2nd linux console.
When `jailhouse cell destroy 1`, the 2nd linux has no chance to put
the uart to a quiese state, so USR1/2 may has pending interrupts. Then
when `jailhosue cell linux xx` to start 2nd linux again, the issue
trigger.

In order to disable irqs before requesting them, both UCR1 and UCR2 irqs
should be disabled, so here fix that, disable the Ageing Timer interrupt
in UCR2 as UCR1 does.

Fixes: 8a61f0c70ae6 ("serial: imx: Disable irqs before requesting them")
Suggested-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Link: https://lore.kernel.org/r/20230206013016.29352-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: imx: Handle RS485 DE signal active high

[ Upstream commit 79d0224f6bf296d04cd843cfc49921b19c97bb09 ]

The default polarity of RS485 DE signal is active high. This driver does
not handle such case properly. Currently, when a pin is multiplexed as a
UART CTS_B on boot, this pin is pulled HIGH by the i.MX UART CTS circuit,
which activates DE signal on the RS485 transceiver and thus behave as if
the RS485 was transmitting data, so the system blocks the RS485 bus when
it starts and until user application takes over. This behavior is not OK.
The problem consists of two separate parts.

First, the i.MX UART IP requires UCR1 UARTEN and UCR2 RXEN to be set for
UCR2 CTSC and CTS bits to have any effect. The UCR2 CTSC bit permits the
driver to set CTS (RTS_B or RS485 DE signal) to either level sychronous
to the internal UART IP clock. Compared to other options, like GPIO CTS
control, this has the benefit of being synchronous to the UART IP clock
and thus without glitches or bus delays. The reason for the CTS design
is likely because when the Receiver is disabled, the UART IP can never
indicate that it is ready to receive data by assering CTS signal, so
the CTS is always pulled HIGH by default.

When the port is closed by user space, imx_uart_stop_rx() clears UCR2
RXEN bit, and imx_uart_shutdown() clears UCR1 UARTEN bit. This disables
UART Receiver and UART itself, and forces CTS signal HIGH, which leads
to the RS485 bus being blocked because RS485 DE is incorrectly active.

The proposed solution for this problem is to keep the Receiver running
even after the port is closed, but in loopback mode. This disconnects
the RX FIFO input from the RXD external signal, and since UCR2 TXEN is
cleared, the UART Transmitter is disabled, so nothing can feed data in
the RX FIFO. Because the Receiver is still enabled, the UCR2 CTSC and
CTS bits still have effect and the CTS (RS485 DE) control is retained.

Note that in case of RS485 DE signal active low, there is no problem and
no special handling is necessary. The CTS signal defaults to HIGH, thus
the RS485 is by default set to Receive and the bus is not blocked.

Note that while there is the possibility to control CTS using GPIO with
either CTS polarity, this has the downside of not being synchronous to
the UART IP clock and thus glitchy and susceptible to slow DE switching.

Second, on boot, before the UART driver probe callback is called, the
driver core triggers pinctrl_init_done() and configures the IOMUXC to
default state. At this point, UCR1 UARTEN and UCR2 RXEN are both still
cleared, but UART CTS_B (RS485 DE) is configured as CTS function, thus
the RTS signal is pulled HIGH by the UART IP CTS circuit.

One part of the solution here is to enable UCR1 UARTEN and UCR2 RXEN and
UTS loopback in this driver probe callback, thus unblocking the CTSC and
CTS control early on. But this is still too late, since the pin control
is already configured and CTS has been pulled HIGH for a short period
of time.

When Linux kernel boots and this driver is bound, the pin control is set
to special "init" state if the state is available, and driver can switch
the "default" state afterward when ready. This state can be used to set
the CTS line as a GPIO in DT temporarily, and a GPIO hog can force such
GPIO to LOW, thus keeping the RS485 DE line LOW early on boot. Once the
driver takes over and UCR1 UARTEN and UCR2 RXEN and UTS loopback are all
enabled, the driver can switch to "default" pin control state and control
the CTS line as function instead. DT binding example is below:

"
&gpio6 {
  rts-init-hog {
    gpio-hog;
    gpios = <5 0>;
    output-low;
    line-name = "rs485-de";
  };
};

&uart5 { /* DHCOM UART2 */
  pinctrl-0 = <&pinctrl_uart5>;
  pinctrl-1 = <&pinctrl_uart5_init>;
  pinctrl-names = "default", "init";
  ...
};
pinctrl_uart5_init: uart5-init-grp {
  fsl,pins = <
...
    MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05       0x30b1
  >;
};

pinctrl_uart5: uart5-grp {
  fsl,pins = <
...
    MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B      0x30b1
  >;
};
"

Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220929144400.13571-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ef25e16ea967 ("tty: serial: imx: disable Ageing Timer interrupt request irq")
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: fsl_lpuart: fix RS485 RTS polariy inverse issue

[ Upstream commit 3957b9501a5a8fa709ae4a47483714491471f6db ]

The previous 'commit 846651eca073 ("serial: fsl_lpuart: RS485 RTS
polariy is inverse")' only fixed the inverse issue on lpuart 8bit
platforms.

This is a follow-up patch to fix the RS485 polarity inverse
issue on lpuart 32bit platforms.

Fixes: 03895cf41d18 ("tty: serial: fsl_lpuart: Add support for RS-485")
Reported-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20230207162420.3647904-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Cap MSIX used to online CPUs + 1

[ Upstream commit 9cd9842c46996ef62173c36619c746f57416bcb0 ]

The irdma driver can use a maximum number of msix vectors equal
to num_online_cpus() + 1 and the kernel warning stack below is shown
if that number is exceeded.

The kernel throws a warning as the driver tries to update the affinity
hint with a CPU mask greater than the max CPU IDs. Fix this by capping
the MSIX vectors to num_online_cpus() + 1.

WARNING: CPU: 7 PID: 23655 at include/linux/cpumask.h:106 irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma]
RIP: 0010:irdma_cfg_ceq_vector+0x34c/0x3f0 [irdma]
Call Trace:
irdma_rt_init_hw+0xa62/0x1290 [irdma]
? irdma_alloc_local_mac_entry+0x1a0/0x1a0 [irdma]
? __is_kernel_percpu_address+0x63/0x310
? rcu_read_lock_held_common+0xe/0xb0
? irdma_lan_unregister_qset+0x280/0x280 [irdma]
? irdma_request_reset+0x80/0x80 [irdma]
? ice_get_qos_params+0x84/0x390 [ice]
irdma_probe+0xa40/0xfc0 [irdma]
? rcu_read_lock_bh_held+0xd0/0xd0
? irdma_remove+0x140/0x140 [irdma]
? rcu_read_lock_sched_held+0x62/0xe0
? down_write+0x187/0x3d0
? auxiliary_match_id+0xf0/0x1a0
? irdma_remove+0x140/0x140 [irdma]
auxiliary_bus_probe+0xa6/0x100
__driver_probe_device+0x4a4/0xd50
? __device_attach_driver+0x2c0/0x2c0
driver_probe_device+0x4a/0x110
__driver_attach+0x1aa/0x350
bus_for_each_dev+0x11d/0x1b0
? subsys_dev_iter_init+0xe0/0xe0
bus_add_driver+0x3b1/0x610
driver_register+0x18e/0x410
? 0xffffffffc0b88000
irdma_init_module+0x50/0xaa [irdma]
do_one_initcall+0x103/0x5f0
? perf_trace_initcall_level+0x420/0x420
? do_init_module+0x4e/0x700
? __kasan_kmalloc+0x7d/0xa0
? kmem_cache_alloc_trace+0x188/0x2b0
? kasan_unpoison+0x21/0x50
do_init_module+0x1d1/0x700
load_module+0x3867/0x5260
? layout_and_allocate+0x3990/0x3990
? rcu_read_lock_held_common+0xe/0xb0
? rcu_read_lock_sched_held+0x62/0xe0
? rcu_read_lock_bh_held+0xd0/0xd0
? __vmalloc_node_range+0x46b/0x890
? lock_release+0x5c8/0xba0
? alloc_vm_area+0x120/0x120
? selinux_kernel_module_from_file+0x2a5/0x300
? __inode_security_revalidate+0xf0/0xf0
? __do_sys_init_module+0x1db/0x260
__do_sys_init_module+0x1db/0x260
? load_module+0x5260/0x5260
? do_syscall_64+0x22/0x450
do_syscall_64+0xa5/0x450
entry_SYSCALL_64_after_hwframe+0x66/0xdb

Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Link: https://lore.kernel.org/r/20230207201938.1329-1-sindhu.devale@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: max-3421: Fix setting of I/O pins

[ Upstream commit a7efe3fc7cbe27c6eb2c2a3ab612194f8f800f4c ]

To update the I/O pins, the registers are read/modified/written. The
read operation incorrectly always read the first register. Although
wrong, there wasn't any impact as all the output pins are always
written, and the inputs are read only anyway.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20230207033337.18112-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()

[ Upstream commit 283861a4c52c1ea4df3dd1b6fc75a50796ce3524 ]

If get_ep_from_tid() fails to lookup non-NULL value for ep, ep is
dereferenced later regardless of whether it is empty.
This patch adds a simple sanity check to fix the issue.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 944661dd97f4 ("RDMA/iw_cxgb4: atomically lookup ep and get a reference")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230202184850.29882-1-n.zhandarovich@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: remove faulty cooling logic

[ Upstream commit c85c191694cb1cf290b11059b3d2de8a2732ffd0 ]

The rn5t618 power driver fails to register
a cooling device because POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX
is missing but availability is not checked before registering
cooling device. After improved error checking in the thermal
code, the registration of the power supply fails entirely.

Checking for availability of _MAX before registering cooling device
fixes the rn5t618 problem. But the whole logic feels questionable.

First, the logic is inverted here:
the code tells: max_current = max_cooling but
0 = max_cooling, so there needs to be some inversion
in the code which cannot be found. Comparing with other
cooling devices, it can be found that value for fan speed is not
inverted, value for cpufreq cooling is inverted (similar situation
as here lowest frequency = max cooling)

Second, analyzing usage of _MAX: it is seems that maximum capabilities
of charging controller are specified and not of the battery. Probably
there is not too much mismatch in the drivers actually implementing
that. So nothing has exploded yet. So there is no easy and safe way
to specifify a max cooling value now.

Conclusion for now (as a regression fix) just remove the cooling device
registration and do it properly later on.

Fixes: e49a1e1ee078 ("thermal/core: fix error code in __thermal_cooling_device_register()")
Fixes: 952aeeb3ee28 ("power_supply: Register power supply for thermal cooling device")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Set No Execute Enable bit in PASID table entry

[ Upstream commit e06d24435596c8afcaa81c0c498f5b0ec4ee2b7c ]

Setup No Execute Enable bit (Bit 133) of a scalable mode PASID entry.
This is to allow the use of XD bit of the first level page table.

Fixes: ddf09b6d43ec ("iommu/vt-d: Setup pasid entries for iova over first level")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230126095438.354205-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/dart: Fix apple_dart_device_group for PCI groups

[ Upstream commit cf5c1c87c2391649e05e58ecc6dfc3dc5ebebc05 ]

pci_device_group() can return an already existing IOMMU group if the PCI
device's pagetables have to be shared with another one due to bus
toplogy, isolation features and/or DMA alias quirks.
apple_dart_device_group() however assumes that the group has just been
created and overwrites its iommudata which will eventually lead to
apple_dart_release_group leaving stale entries in sid2group.
Fix that by merging the iommudata if the returned group already exists.

Fixes: f0b636804c7c ("iommu/dart: Clear sid2group entry when a group is freed")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Link: https://lore.kernel.org/r/20230128113532.94651-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: dart: Support >64 stream IDs

[ Upstream commit 510d4072df7fcf27dcd2dc1942d58b2cc02b03f2 ]

T8110 DARTs have up to 256 SIDs, so we need to switch to a bitmap to
handle them properly.

Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-4-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: cf5c1c87c239 ("iommu/dart: Fix apple_dart_device_group for PCI groups")
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: dart: Add suspend/resume support

[ Upstream commit 3d68bbb81b1a64e279180eee1ed0e2c590b5029e ]

We need to save/restore the TCR/TTBR registers, since they are lost
on power gate.

Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20230113105029.26654-3-marcan@marcan.st
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: cf5c1c87c239 ("iommu/dart: Fix apple_dart_device_group for PCI groups")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: mt7621: Delay phy ports initialization

[ Upstream commit 0cb2a8f3456ff1cc51d571e287a48e8fddc98ec2 ]

Some devices like ZBT WE1326 and ZBT WF3526-P and some Netgear models need
to delay phy port initialization after calling the mt7621_pcie_init_port()
driver function to get into reliable boots for both warm and hard resets.

The delay required to detect the ports seems to be in the range [75-100]
milliseconds.

If the ports are not detected the controller is not functional.

There is no datasheet or something similar to really understand why this
extra delay is needed only for these devices and it is not for most of
the boards that are built on mt7621 SoC.

This issue has been reported by openWRT community and the complete
discussion is in [0]. The 100 milliseconds delay has been tested in all
devices to validate it.

Add the extra 100 milliseconds delay to fix the issue.

[0]: https://github.com/openwrt/openwrt/pull/11220

Link: https://lore.kernel.org/r/20221231074041.264738-1-sergio.paracuellos@gmail.com
Fixes: 2bdd5238e756 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: mediatek: remove temporary variable @mask_

[ Upstream commit 49094d928618309877c50e589f23e639a3b0c453 ]

Remove the temporary @mask_, this may cause build warning when use clang
compiler for powerpc, but can't reproduce it when compile for arm64.
the build warning is caused by:

"warning: result of comparison of constant 18446744073709551615 with
expression of type (aka 'unsigned long') is always false
[-Wtautological-constant-out-of-range-compare]"

More information provided in below lore link.

After removing @mask_, there is a "CHECK:MACRO_ARG_REUSE" when run
checkpatch.pl, but due to @mask is constant, no reuse problem will happen.

Link: https://lore.kernel.org/lkml/202212160357.jJuesD8n-lkp@intel.com/t/
Fixes: 84513eccd678 ("phy: mediatek: fix build warning of FIELD_PREP()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118084343.26913-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: configfs: Restrict symlink creation is UDC already binded

[ Upstream commit 89e7252d6c7e7eeb31971cd7df987316ecc64ff5 ]

During enumeration or composition switch,a userspace process
agnostic of the conventions of configs can try to create function
symlinks even after the UDC is bound to current config which is
not correct. Potentially it can create duplicates within the
current config.

Prevent this by adding a check if udc_name already exists, then bail
out of cfg_link.

Following is an example:

Step1:
ln -s X1 ffs.a
-->cfg_link
--> usb_get_function(ffs.a)
->ffs_alloc

CFG->FUNC_LIST: <ffs.a>
C->FUNCTION: <empty>

Step2:
echo udc.name > /config/usb_gadget/g1/UDC
--> UDC_store
->composite_bind
->usb_add_function

CFG->FUNC_LIST: <empty>
C->FUNCTION: <ffs.a>

Step3:
ln -s Y1 ffs.a
-->cfg_link
-->usb_get_function(ffs.a)
->ffs_alloc

CFG->FUNC_LIST: <ffs.a>
C->FUNCTION: <ffs.a>

both the lists corresponds to the same function instance ffs.a
but the usb_function* pointer is different because in step 3
ffs_alloc has created a new reference to usb_function* for
ffs.a and added it to cfg_list.

Step4:
Now a composition switch involving <ffs.b,ffs.a> is executed.

the composition switch will involve 3 things:
1. unlinking the previous functions existing
2. creating new symlinks
3. writing UDC

However, the composition switch is generally taken care by
userspace process which creates the symlinks in its own
nomenclature(X*) and removes only those.
So it won't be able to remove Y1 which user had created
by own.

Due to this the new symlinks cannot be created for ffs.a
since the entry already exists in CFG->FUNC_LIST.

The state of the CFG->FUNC_LIST is as follows:
CFG->FUNC_LIST: <ffs.a>

Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
Signed-off-by: Udipto Goswami <quic_ugoswami@quicinc.com>
Link: https://lore.kernel.org/r/20230201132308.31523-1-quic_ugoswami@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: mediatek: don't unregister something that wasn't registered

[ Upstream commit ba883de971d1ad018f3083d9195b8abe54d87407 ]

This function only calls mtk_otg_switch_init() when the ->port_mode
is MUSB_OTG so the clean up code should only call mtk_otg_switch_exit()
for that mode.

Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y8/3TqpqiSr0RxFH@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cxgb4: add null-ptr-check after ip_dev_find()

[ Upstream commit ef42520240aacfc0d46c8d780c051d135a8dc9b7 ]

ip_dev_find() may return NULL and assign it to pdev which is
dereferenced later.
Fix this by checking the return value of ip_dev_find() for NULL
similar to the way it is done with other instances of said function.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 1cab775c3e75 ("RDMA/cxgb4: Fix LE hash collision bug for passive open connection")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230201172103.17261-1-n.zhandarovich@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case

[ Upstream commit 9ad9df8447547febe9dd09b040f4528a09e495f0 ]

The RXWATER value must be greater than 0 according to the LPUART
reference manual. And when the number of datawords in the receive
FIFO is greater than RXWATER, an interrupt or a DMA request is
generated, so no need to set the different value for lpuart interrupt
case and dma case. Here delete the wrong RXWATER setting for dma case
directly.

Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230130064449.9564-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: early: xhci-dbc: Fix a potential out-of-bound memory access

[ Upstream commit a4a97ab3db5c081eb6e7dba91306adefb461e0bd ]

If xdbc_bulk_write() fails, the values in 'buf' can be anything. So the
string is not guaranteed to be NULL terminated when xdbc_trace() is called.

Reserve an extra byte, which will be zeroed automatically because 'buf' is
a static variable, in order to avoid troubles, should it happen.

Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d6a7562c5e839a195cee85db6dc81817f9372cb1.1675016180.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fpga: microchip-spi: rewrite status polling in a time measurable way

[ Upstream commit 88e705697e801299a13ecaf2ba54599964fe711c ]

Original busy loop with retries count in mpf_poll_status() is not too
reliable, as it takes different times on different systems. Replace it
with read_poll_timeout() macro.

While at it, fix polling stop condition to met function's original
intention declared in the comment. The issue with original polling stop
condition is that it stops if any of mask bits is set, while intention
was to stop if all mask bits is set. This was not noticible because only
MPF_STATUS_READY is passed as mask argument and it is BIT(1).

Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-3-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fpga: microchip-spi: move SPI I/O buffers out of stack

[ Upstream commit 1da53d23a41c5f77963984d8da5623ed56918ada ]

As spi-summary doc says:
> I/O buffers use the usual Linux rules, and must be DMA-safe.
> You'd normally allocate them from the heap or free page pool.
> Don't use the stack, or anything that's declared "static".

Replace spi_write() with spi_write_then_read(), which is dma-safe for
on-stack buffers. Use cacheline aligned buffers for transfers used in
spi_sync_transfer().

Although everything works OK with stack-located I/O buffers, better
follow the doc to be safe.

Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-2-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dw-edma: Fix missing src/dst address of interleaved xfers

[ Upstream commit 13b6299cf66165a442089fa895a7f70250703584 ]

Interleaved DMA transfer support was added by 85e7518f42c8 ("dmaengine:
dw-edma: Add device_prep_interleave_dma() support"), but depending on the
selected channel, either source or destination address are left
uninitialized which was obviously wrong.

Initialize the destination address of the eDMA burst descriptors for
DEV_TO_MEM interleaved operations and the source address for MEM_TO_DEV
operations.

Link: https://lore.kernel.org/r/20230113171409.30470-5-Sergey.Semin@baikalelectronics.ru
Fixes: 85e7518f42c8 ("dmaengine: dw-edma: Add device_prep_interleave_dma() support")
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Add missing completion handler

[ Upstream commit e55f67391fa986f7357edba0ca59e668d99c3a5f ]

This is used when responding to GET_STATUS requests. Without this, it
crashes on completion.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230123073508.2350402-2-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle

[ Upstream commit 18e126e97c961f7a93823795c879d7c085fe5098 ]

KASAN reported a null-ptr-deref error:

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 1373 Comm: modprobe
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:dmi_sysfs_entry_release
...
Call Trace:
<TASK>
kobject_put
dmi_sysfs_register_handle (drivers/firmware/dmi-sysfs.c:540) dmi_sysfs
dmi_decode_table (drivers/firmware/dmi_scan.c:133)
dmi_walk (drivers/firmware/dmi_scan.c:1115)
dmi_sysfs_init (drivers/firmware/dmi-sysfs.c:149) dmi_sysfs
do_one_initcall (init/main.c:1296)
...
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x4000000 from 0xffffffff81000000
---[ end Kernel panic - not syncing: Fatal exception ]---

It is because previous patch added kobject_put() to release the memory
which will call dmi_sysfs_entry_release() and list_del().

However, list_add_tail(entry->list) is called after the error block,
so the list_head is uninitialized and cannot be deleted.

Move error handling to after list_add_tail to fix this.

Fixes: 660ba678f999 ("firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221111015326.251650-2-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: transport_class: fix resource leak when transport_add_device() fails

[ Upstream commit e5da06b27ff5a148e42265c8e306670a9d913969 ]

The normal call sequence of using transport class is:

Add path:
transport_setup_device()
  transport_setup_classdev()  // call sas_host_setup() here
transport_add_device()       // if fails, need call transport_destroy_device()
transport_configure_device()

Remove path:
transport_remove_device()
  transport_remove_classdev  // call sas_host_remove() here
transport_destroy_device()

If transport_add_device() fails, need call transport_destroy_device()
to free memory, but in this case, ->remove() is not called, and the
resources allocated in ->setup() are leaked. So fix these leaks by
calling ->remove() in transport_add_class_device() if it returns error.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221115031638.3816551-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: transport_class: fix possible memory leak

[ Upstream commit a86367803838b369fe5486ac18771d14723c258c ]

Current some drivers(like iscsi) call transport_register_device()
failed, they don't call transport_destroy_device() to release the
memory allocated in transport_setup_device(), because they don't
know what was done, it should be internal thing to release the
resource in register function. So fix this leak by calling destroy
function inside register function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110102307.3492557-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: location: Free struct acpi_pld_info *pld before return false

[ Upstream commit 0d150f967e8410e1e6712484543eec709356a65d ]

struct acpi_pld_info *pld should be freed before the return of allocation
failure, to prevent memory leak, add the ACPI_FREE() to fix it.

Fixes: bc443c31def5 ("driver core: location: Check for allocations failure")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1669102648-11517-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fix resource leak in device_add()

[ Upstream commit 6977b1a5d67097eaa4d02b0c126c04cc6e8917c0 ]

When calling kobject_add() failed in device_add(), it will call
cleanup_glue_dir() to free resource. But in kobject_add(),
dev->kobj.parent has been set to NULL. This will cause resource leak.

The process is as follows:
device_add()
get_device_parent()
class_dir_create_and_add()
kobject_add() //kobject_get()
...
dev->kobj.parent = kobj;
...
kobject_add() //failed, but set dev->kobj.parent = NULL
...
glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto
//"Error" label
...
cleanup_glue_dir() //becaues glue_dir is NULL, not call
//kobject_put()

The preceding problem may cause insmod mac80211_hwsim.ko to failed.
sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim'
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x224/0x280
kobject_add_internal+0x2aa/0x880
kobject_add+0x135/0x1a0
get_device_parent+0x3d7/0x590
device_add+0x2aa/0x1cb0
device_create_groups_vargs+0x1eb/0x260
device_create+0xdc/0x110
mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim]
init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim]
do_one_initcall+0x10f/0x630
do_init_module+0x19f/0x5e0
load_module+0x64b7/0x6eb0
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to
register things with the same name in the same directory.

Fixes: cebf8fd16900 ("driver core: fix race between creating/querying glue dir and its cleanup")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221123012042.335252-1-shaozhengchao@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: fastrpc: Fix an error handling path in fastrpc_rpmsg_probe()

[ Upstream commit 11819ed2b70da94acc41fec34178a011c4d3d25d ]

If of_platform_populate() fails, some resources need to be freed as already
done in the other error handling paths.

Fixes: 278d56f970ae ("misc: fastrpc: Reference count channel context")
Fixes: 3abe3ab3cdab ("misc: fastrpc: add secure domain support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/b909d2f3273b794ea0f1f78d14bc24affb08ea5f.1669398274.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc/mei/hdcp: Use correct macros to initialize uuid_le

[ Upstream commit 512ba04d8211dd1a54dd36adc3ecc527a28069c5 ]

GUID_INIT() is for internal guid_t type and shouldn't be used
for the uuid_le. I.o.w. relying on the implementation details
is layering violation. Use correct macros to initialize uuid_le.

Fixes: 64e9bbdd9588 ("misc/mei/hdcp: Client driver for HDCP application")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221228160500.21220-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mei: pxp: Use correct macros to initialize uuid_le

[ Upstream commit 503b676dde2780330c90a10b37a844686601a784 ]

GUID_INIT() is for internal guid_t type and shouldn't be used
for the uuid_le. I.o.w. relying on the implementation details
is layering violation. Use correct macros to initialize uuid_le.

Fixes: c2004ce99ed7 ("mei: pxp: export pavp client to me client bus")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20221228160558.21311-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF

[ Upstream commit 1a726cb47fd204109c767409fa9ca15a96328f14 ]

The call to get_user_pages_fast() in vmci_host_setup_notify() can return
NULL context->notify_page causing a GPF. To avoid GPF check if
context->notify_page == NULL and return error if so.

general protection fault, probably for non-canonical address
0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x0005088000000300-
0x0005088000000307]
CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1
Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014
RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0
Call Trace:
<TASK>
vmci_host_unlocked_ioctl+0x362/0x1f40
__x64_sys_ioctl+0x1a1/0x230
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: stratix10-svc: fix error handle while alloc/add device failed

[ Upstream commit d66a4c20ae55ac88136b4a3befd944c093ffa677 ]

If add device "stratix10-rsu" failed in stratix10_svc_drv_probe(),
the 'svc_fifo' and 'genpool' need be freed in the error path.

If allocate or add device "intel-fcs" failed in stratix10_svc_drv_probe(),
the device "stratix10-rsu" need be unregistered in the error path.

Fixes: e6281c26674e ("firmware: stratix10-svc: Add support for FCS")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221129163602.462369-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: stratix10-svc: add missing gen_pool_destroy() in stratix10_svc_drv_probe()

[ Upstream commit 9175ee1a99d57ec07d66ff572e1d5a724477ab37 ]

In error path in stratix10_svc_drv_probe(), gen_pool_destroy() should be called
to destroy the memory pool that created by svc_create_memory_pool().

Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221129163602.462369-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

applicom: Fix PCI device refcount leak in applicom_init()

[ Upstream commit ce4273d89c52167d6fe20572136c58117eae0657 ]

As comment of pci_get_class() says, it returns a pci_device with its
refcount increased and decreased the refcount for the input parameter
@from if it is not NULL.

If we break the loop in applicom_init() with 'dev' not NULL, we need to
call pci_dev_put() to decrease the refcount. Add the missing
pci_dev_put() to avoid refcount leak.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221122114035.24194-1-wangxiongfeng2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eeprom: idt_89hpesx: Fix error handling in idt_init()

[ Upstream commit d717a3ab282f51ec45142f911f7ef8a55c057de5 ]

A problem about idt_89hpesx create debugfs failed is triggered with the
following log given:

[ 4973.269647] debugfs: Directory 'idt_csr' with parent '/' already present!

The reason is that idt_init() returns i2c_add_driver() directly without
checking its return value, if i2c_add_driver() failed, it returns without
destroy the newly created debugfs, resulting the debugfs of idt_csr can
never be created later.

idt_init()
   debugfs_create_dir() # create debugfs directory
   i2c_add_driver()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without destroy debugfs directory

Fix by removing debugfs when i2c_add_driver() returns error.

Fixes: cfad6425382e ("eeprom: Add IDT 89HPESx EEPROM/CSR driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20221110020030.47711-1-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol"

[ Upstream commit 70fae37a09268455b8ab4f64647086b61da6f39c ]

This reverts commit be826ada52f1fcabed5b5217c94609ebf5967211.

The function monitor_card() is a timer handler that runs in an
atomic context, but it calls usleep_range() that can sleep.
As a result, the sleep-in-atomic-context bugs will happen.
The process is shown below:

    (atomic context)
monitor_card()
  set_protocol()
    usleep_range() //sleep

The origin commit c1986ee9bea3 ("[PATCH] New Omnikey Cardman
4000 driver") works fine.

Fixes: be826ada52f1 ("char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20230118141000.5580-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()

[ Upstream commit 38f28cfe9d08e3a47ef008798b275fef8118fc20 ]

Add the missing clk_disable_unprepare() before return from
tegra_uart_hw_init() in the error handling path.
When request_irq() fails in tegra_uart_startup(), 'tup->uart_clk'
has been enabled, fix it by adding clk_disable_unprepare().

Fixes: cc9ca4d95846 ("serial: tegra: Only print FIFO error message when an error occurs")
Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Link: https://lore.kernel.org/r/20221126020852.113378-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown()

[ Upstream commit 4029dfc034febb54f6dd8ea83568accc943bc088 ]

The LPUART Status Register needs to be cleared when closing the uart
port to get a clean environment when reopening the uart.

Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221125101953.18753-4-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()

[ Upstream commit 1d4bd0e4ae4ba95892bef919a8d4d3f08f122d7e ]

UARTBAUD_RDMAE and UARTBAUD_TDMAE are enabled in lpuart32_startup(), but
lpuart32_shutdown() not disable them, only free the dma ring buffer and
release the dma channels, so here disable the Rx/Tx DMA first in
lpuart32_shutdown().

Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221125101953.18753-3-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwtracing: hisi_ptt: Only add the supported devices to the filters list

[ Upstream commit b8d976c7d41a28c0fccf22c7113be9a29dc07e5c ]

The PTT device can only support the devices on the same PCIe core,
within BDF range [lower_bdf, upper_bdf]. It's not correct to assume
the devices on the root bus are from the same PCIe core, there are
cases that root ports from different PCIe core are sharing the same
bus. So check when initializing the filters list.

Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230112112201.16283-1-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc

[ Upstream commit fd858402c6d0a80e0b543886b9f7865c6d76d5d6 ]

8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in
epf_ntb_mw_bar_init()") added a "num_mws" parameter to
epf_ntb_mw_bar_clear() but failed to add kernel-doc for num_mws.

Add kernel-doc for num_mws on epf_ntb_mw_bar_clear().

Fixes: 8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()")
Link: https://lore.kernel.org/r/20230103024907.293853-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning

[ Upstream commit 9298804840457c29c7e115f3a87bec406c262c81 ]

Cleanup warning found by scripts/kernel-doc.

Consolidate terms:

- host, host1 to HOST
- vhost, vHost, Vhost, VHOST2 to VHOST

Link: https://lore.kernel.org/r/20221102141014.1025893-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Stable-dep-of: fd858402c6d0 ("PCI: endpoint: pci-epf-vntb: Add epf_ntb_mw_bar_clear() num_mws kernel-doc")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: switchtec: Return -EFAULT for copy_to_user() errors

[ Upstream commit ddc10938e08cd7aac63d8385f7305f7889df5179 ]

switchtec_dev_read() didn't handle copy_to_user() errors correctly: it
assigned "rc = -EFAULT", but actually returned either "size", -ENXIO, or
-EBADMSG instead.

Update the failure cases to unlock mrpc_mutex and return -EFAULT directly.

Link: https://lore.kernel.org/r/20221216162126.207863-3-helgaas@kernel.org
Fixes: 080b47def5e5 ("MicroSemi Switchtec management interface driver")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/IOV: Enlarge virtfn sysfs name buffer

[ Upstream commit ea0b5aa5f184cf8293c93163f0fb00505190d431 ]

The sysfs link name "virtfn%u" constructed by pci_iov_sysfs_link() requires
17 bytes to contain the longest possible string. Increase VIRTFN_ID_LEN to
accommodate that.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

[bhelgaas: commit log, comment at #define]
Fixes: dd7cc44d0bce ("PCI: add SR-IOV API for Physical Function driver")
Link: https://lore.kernel.org/r/20221218033347.23743-1-gremlin@altlinux.org
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: intel_pmc_mux: Don't leak the ACPI device reference count

[ Upstream commit c3194949ae8fcbe2b7e38670e7c6a5cfd2605edc ]

When acpi_dev_get_memory_resources() fails, the reference count is
left bumped. Drop it as it's done in the other error paths.

Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230102202933.15968-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: cti: Add PM runtime call in enable_store

[ Upstream commit eff674a9b86a6ffdd10c3af3863545acf7f1ce4f ]

In commit 6746eae4bbad ("coresight: cti: Fix hang in cti_disable_hw()")
PM runtime calls are removed from cti_enable_hw/cti_disable_hw. When
enabling CTI by writing enable sysfs node, clock for accessing CTI
register won't be enabled. Device will crash due to register access
issue. Add PM runtime call in enable_store to fix this issue.

Fixes: 6746eae4bbad ("coresight: cti: Fix hang in cti_disable_hw()")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
[Change to only call pm_runtime_put if a disable happened]
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-3-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: cti: Prevent negative values of enable count

[ Upstream commit 3244fb6dbbf1ffc114cdf382cc167bdd8c18088a ]

Writing 0 to the enable control repeatedly results in a negative value
for enable_req_count. After this, writing 1 to the enable control
appears to not work until the count returns to positive.

Change it so that it's impossible for enable_req_count to be < 0.
Return an error to indicate that the disable request was invalid.

Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: etm4x: Fix accesses to TRCSEQRSTEVR and TRCSEQSTR

[ Upstream commit 589d928248b72f8377d45904a14bcf686aa8bbeb ]

The TRCSEQRSTEVR and TRCSEQSTR registers are not implemented if the
TRCIDR5.NUMSEQSTATE == 0. Skip accessing the registers in such cases.

Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114091632.60095-1-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Refactor power_line_frequency_controls_limited

[ Upstream commit 3aa8628eb78a63d0bf93e159846e9c92bccc8f69 ]

Move the control mapping to uvc_ctrl.c. This way we do not have
references to UVC controls or V4L2 controls in uvc_driver.c.

This also fixes a bug introduced in commit 382075604a68 ("media:
uvcvideo: Limit power line control for Quanta UVC Webcam"). The
offending commit caused the power line control menu entries to have
incorrect indices compared to the V4L2_CID_POWER_LINE_FREQUENCY_*
enumeration. Now that the limited mapping reuses the correct menu_info
array, the indices correctly map to the V4L2 control specification.

Fixes: 382075604a68 ("media: uvcvideo: Limit power line control for Quanta UVC Webcam")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Refactor uvc_ctrl_mappings_uvcXX

[ Upstream commit 96a160b068e09b4ed5a32e2179e5219fc3545eca ]

Convert the array of structs into an array of pointers, that way the
mappings can be reused.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Stable-dep-of: 3aa8628eb78a ("media: uvcvideo: Refactor power_line_frequency_controls_limited")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU

[ Upstream commit 40140eda661ea4be219ef194a4f43b7b5e3bbd27 ]

Replace the count with a mask field that lets us choose not only the max
value, but also the minimum value and what values are valid in between.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Stable-dep-of: 3aa8628eb78a ("media: uvcvideo: Refactor power_line_frequency_controls_limited")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Check for INACTIVE in uvc_ctrl_is_accessible()

[ Upstream commit 9f582f0418ed1c18f92c9e4628075d6ec9a7d9fb ]

Check for inactive controls in uvc_ctrl_is_accessible().

Use the new value for the master_id controls if present, otherwise
use the existing value to determine if it is OK to set the control.
Doing this here avoids attempting to set an inactive control, which
will return an error from the USB device, which returns an invalid
errorcode.

This fixes:
  warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO
  warn: v4l2-test-controls.cpp(483): s_ctrl returned EIO
test VIDIOC_G/S_CTRL: OK
  warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO
  warn: v4l2-test-controls.cpp(739): s_ext_ctrls returned EIO
  warn: v4l2-test-controls.cpp(816): s_ext_ctrls returned EIO
test VIDIOC_G/S/TRY_EXT_CTRLS: OK

Tested with:
v4l2-ctl -c auto_exposure=1
OK
v4l2-ctl -c exposure_time_absolute=251
OK
v4l2-ctl -c auto_exposure=3
OK
v4l2-ctl -c exposure_time_absolute=251
VIDIOC_S_EXT_CTRLS: failed: Input/output error
exposure_time_absolute: Input/output error
ERROR
v4l2-ctl -c auto_exposure=3,exposure_time_absolute=251,auto_exposure=1
v4l2-ctl -C auto_exposure,exposure_time_absolute
auto_exposure: 1
exposure_time_absolute: 251

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha/boot/tools/objstrip: fix the check for ELF header

[ Upstream commit 1878787797cbb019eeefe6f905514dcd557302b6 ]

Just memcmp() with ELFMAG - that's the normal way to do it in userland
code, which that thing is. Besides, that has the benefit of actually
building - str_has_prefix() is *NOT* present in <string.h>.

Fixes: 5f14596e55de "alpha: Replace strncmp with str_has_prefix"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kobject: Fix slab-out-of-bounds in fill_kobj_path()

[ Upstream commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 ]

In kobject_get_path(), if kobj->name is changed between calls
get_kobj_path_length() and fill_kobj_path() and the length becomes
longer, then fill_kobj_path() will have an out-of-bounds bug.

The actual current problem occurs when the ixgbe probe.

In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name
length becomes longer, out-of-bounds will occur.

cpu0                                         cpu1
ixgbe_probe
register_netdev(netdev)
  netdev_register_kobject
   device_add
    kobject_uevent // Sending ADD events
                                             systemd-udevd // rename netdev
                                              dev_change_name
                                               device_rename
                                                kobject_rename
ixgbe_mii_bus_init                             |
  mdiobus_register                              |
   __mdiobus_register                           |
    device_register                             |
     device_add                                 |
      kobject_uevent                            |
       kobject_get_path                         |
        len = get_kobj_path_length // old name  |
        path = kzalloc(len, gfp_mask);          |
                                                kobj->name = name;
                                                /* name length becomes
                                                 * longer
                                                 */
        fill_kobj_path /* kobj path length is
                        * longer than path,
                        * resulting in out of
                        * bounds when filling path
                        */

This is the kasan report:

==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0
Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673

Workqueue: events work_for_cpu_fn
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_address_description.constprop.0+0x86/0x1e7
print_report+0x36/0x4f
kasan_report+0xad/0x130
kasan_check_range+0x35/0x1c0
memcpy+0x39/0x60
fill_kobj_path+0x50/0xc0
kobject_get_path+0x5a/0xc0
kobject_uevent_env+0x140/0x460
device_add+0x5c7/0x910
__mdiobus_register+0x14e/0x490
ixgbe_probe.cold+0x441/0x574 [ixgbe]
local_pci_probe+0x78/0xc0
work_for_cpu_fn+0x26/0x40
process_one_work+0x3b6/0x6a0
worker_thread+0x368/0x520
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30

This reproducer triggers that bug:

while:
do
    rmmod ixgbe
    sleep 0.5
    modprobe ixgbe
    sleep 0.5

When calling fill_kobj_path() to fill path, if the name length of
kobj becomes longer, return failure and retry. This fixes the problem.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kobject: modify kobject_get_path() to take a const *

[ Upstream commit 33a0a1e3b3d17445832177981dc7a1c6a5b009f8 ]

kobject_get_path() does not modify the kobject passed to it, so make the
pointer constant.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20221001165315.2690141-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 3bb2a01caa81 ("kobject: Fix slab-out-of-bounds in fill_kobj_path()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: fix potential null-ptr-deref in device_add()

[ Upstream commit f6837f34a34973ef6600c08195ed300e24e97317 ]

I got the following null-ptr-deref report while doing fault injection test:

BUG: kernel NULL pointer dereference, address: 0000000000000058
CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G    B   W        N 6.1.0-rc3+
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x196/0x210
bus_remove_device+0x1bd/0x240
device_add+0xd3d/0x1100
w1_add_master_device+0x476/0x490 [wire]
ds2482_probe+0x303/0x3e0 [ds2482]

This is how it happened:

w1_alloc_dev()
  // The dev->driver is set to w1_master_driver.
  memcpy(&dev->dev, device, sizeof(struct device));
  device_add()
    bus_add_device()
    dpm_sysfs_add() // It fails, calls bus_remove_device.

    // error path
    bus_remove_device()
      // The dev->driver is not null, but driver is not bound.
      __device_release_driver()
        klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref.

    // normal path
    bus_probe_device() // It's not called yet.
      device_bind_driver()

If dev->driver is set, in the error path after calling bus_add_device()
in device_add(), bus_remove_device() is called, then the device will be
detached from driver. But device_bind_driver() is not called yet, so it
causes null-ptr-deref while access the 'knode_driver'. To fix this, set
dev->driver to null in the error path before calling bus_remove_device().

Fixes: 57eee3d23e88 ("Driver core: Call device_pm_add() after bus_add_device() in device_add()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205034904.2077765-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: cadence: Don't overflow the command FIFOs

[ Upstream commit 7cbfee2e2e40d2be54196362a845a3ea0a3f877d ]

The command FIFOs in the Cadence IP can be configured during design
up to 32 entries, and the code in cadence_master.c was assuming the
full 32-entry FIFO. But all current Intel implementations use an 8-entry
FIFO.

Up to now the longest message used was 6 entries so this wasn't
causing any problem. But future Cirrus Logic codecs have downloadable
firmware or tuning blobs. It is more efficient for the codec driver to
issue long transfers that can take advantage of any queuing in the
Soundwire controller and avoid the overhead of repeatedly writing the
page registers.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 2f52a5177caa ("soundwire: cdns: Add cadence library")
Link: https://lore.kernel.org/r/20221202161812.4186897-2-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: designware: fix i2c_dw_clk_rate() return size to be u32

[ Upstream commit f2e1fa99550dd7a882229e2c2cd9ecab4ce773d0 ]

Make i2c_dw_clk_rate() to return u32 instead of unsigned long, as the
function return the value of get_clk_rate_khz() which returns u32.

Fixes: b33af11de236 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe()

[ Upstream commit a8d3392e0e5cfeb03f0cea1f2bc3f5f183c1deb4 ]

When request_irq(ires1->start) failed in w5300_hw_probe(), irq
ires->start has not been freed, and on the clean_up3 error path,
we also need to free ires1->start irq, fix it.

In addition, We should add free_irq in fusb300_remove(), and give
the lables a proper name so that they can be understood easily,
so add free_irq in fusb300_remove(), and update clean_up3 to
err_alloc_request.

Fixes: 0fe6f1d1f612 ("usb: udc: add Faraday fusb300 driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221123014121.1989721-1-cuigaosheng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: light: tsl2563: Do not hardcode interrupt trigger type

[ Upstream commit 027641b52fe37b64af61025298ce160c8b9b7a73 ]

Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_RAISING,
let's respect the settings specified in the firmware description.
To be compatible with the older firmware descriptions, if trigger
type is not set up there, we'll set it to default (raising edge).

Fixes: 388be4883952 ("staging:iio: tsl2563 abi fixes and interrupt handling")
Fixes: bdab1001738f ("staging:iio:light:tsl2563 remove old style event registration.")
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221207190348.9347-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix refcount leak in hns_roce_mmap

[ Upstream commit cf6a05c8494a8ae7fec8e5f1229b45ca5b4bcd30 ]

rdma_user_mmap_entry_get_pgoff() takes the reference.
Add missing rdma_user_mmap_entry_put() to release the reference.

Fixes: 0045e0d3f42e ("RDMA/hns: Support direct wqe of userspace")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20221223072900.802728-1-linmq006@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: HISI_DMA should depend on ARCH_HISI

[ Upstream commit dcca9d045c0852584ad092123c7f6e6526a633b1 ]

The HiSilicon DMA Engine is only present on HiSilicon SoCs. Hence add a
dependency on ARCH_HISI, to prevent asking the user about this driver
when configuring a kernel without HiSilicon SoC support.

Fixes: e9f08b65250d73ab ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/363a1816d36cd3cf604d88ec90f97c75f604de64.1669044190.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/erdma: Fix refcount leak in erdma_mmap

[ Upstream commit ee84146c05ad2316b9a7222d0ec4413e0bf30eeb ]

rdma_user_mmap_entry_get() take reference, we should release it when not
need anymore, add the missing rdma_user_mmap_entry_put() in the error
path to fix it.

Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20221220121139.1540564-1-linmq006@gmail.com
Acked-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Set traffic class values in GRPCFG on DSA 2.0

[ Upstream commit 9735bde36487da43d3c3fc910df49639f72decbf ]

On DSA/IAX 1.0, TC-A and TC-B in GRPCFG are set as 1 to have best
performance and cannot be changed through sysfs knobs unless override
option is given.

The same values should be set on DSA 2.0 as well.

Fixes: ea7c8f598c32 ("dmaengine: idxd: restore traffic class defaults after wq reset")
Fixes: ade8a86b512c ("dmaengine: idxd: Set defaults for GRPCFG traffic class")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221209172141.562648-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()

[ Upstream commit 8b450dcff23aa254844492831a8e2b508a9d522d ]

`req` is allocated in pcf50633_adc_async_read(), but
adc_enqueue_request() could fail to insert the `req` into queue.
We need to check the return value and free it in the case of failure.

Fixes: 08c3e06a5eb2 ("mfd: PCF50633 adc driver")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221208061555.8776-1-linqiheng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: cs5535: Don't build on UML

[ Upstream commit 5ec32a3e4053c1a726b45381d56aa9e39eaf3911 ]

The cs5535-mfd driver uses CPU-specific data that is not available
for ARCH=um builds, so don't allow it to be built for UML.

Prevents these build errors:

In file included from ../arch/x86/include/asm/olpc.h:7,
                 from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
   16 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:46: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
   16 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   17 |                 (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   18 |                 (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
   23 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:46: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
   23 |         return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:31: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   24 |                 (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:31: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   25 |                 (boot_cpu_data.x86_model == 10));

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221201012541.11809-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: add UACCESS exceptions for __tsan_volatile_read/write

[ Upstream commit d5d469247264e56960705dc5ae7e1d014861fe40 ]

A lot of the tsan helpers are already excempt from the UACCESS warnings,
but some more functions were added that need the same thing:

kernel/kcsan/core.o: warning: objtool: __tsan_volatile_read16+0x0: call to __tsan_unaligned_read16() with UACCESS enabled
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_write16+0x0: call to __tsan_unaligned_write16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_read16+0x4: call to __tsan_unaligned_read16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_write16+0x4: call to __tsan_unaligned_write16() with UACCESS enabled

As Marco points out, these functions don't even call each other
explicitly but instead gcc (but not clang) notices the functions
being identical and turns one symbol into a direct branch to the
other.

Link: https://lkml.kernel.org/r/20230215130058.3836177-4-arnd@kernel.org
Fixes: 75d75b7a4d54 ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests stat_all_metrics: Change true workload to sleep workload for system wide check

[ Upstream commit f9fa0778ee7349a9aa3d2ea10e9f2ab843a0b44e ]

Testcase stat_all_metrics.sh fails in powerpc:

98: perf all metrics test : FAILED!

Logs with verbose:

  [command]# ./perf test 98 -vv
   98: perf all metrics test                                           :
   --- start ---
  test child forked, pid 13262
  Testing BRU_STALL_CPI
  Testing COMPLETION_STALL_CPI
   ----
  Testing TOTAL_LOCAL_NODE_PUMPS_P23
  Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
  Error:
  Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'.
  Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
  Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
  Error:
  Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
   ----

Based on above logs, we could see some of the hv-24x7 metric events
fails, and logs suggest to run the metric event with -a option.  This
change happened after the commit a4b8cfcabb1d90ec ("perf stat: Delay
metric parsing"), which delayed the metric parsing phase and now before
metric parsing phase perf tool identifies, whether target is system-wide
or not. With this change, perf_event_open will fails with workload
monitoring for uncore events as expected.

The perf all metric test case fails as some of the hv-24x7 metric events
may need bigger workload with system wide monitoring to get the data.
Fix this issue by changing current system wide check from true workload
to sleep 0.01 workload.

Result with the patch changes in powerpc:

  98: perf all metrics test : Ok

Fixes: a4b8cfcabb1d90ec ("perf stat: Delay metric parsing")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printf: fix errname.c list

[ Upstream commit 0c2baf6509af1d11310ae4c1c839481a6e9a4bc4 ]

On most architectures, gcc -Wextra warns about the list of error
numbers containing both EDEADLK and EDEADLOCK:

lib/errname.c:15:67: warning: initialized field overwritten [-Woverride-init]
   15 | #define E(err) [err + BUILD_BUG_ON_ZERO(err <= 0 || err > 300)] = "-" #err
      |                                                                   ^~~
lib/errname.c:172:2: note: in expansion of macro 'E'
  172 |  E(EDEADLK), /* EDEADLOCK */
      |  ^

On parisc, a similar error happens with -ECANCELLED, which is an
alias for ECANCELED.

Make the EDEADLK printing conditional on the number being distinct
from EDEADLOCK, and remove the -ECANCELLED bit completely as it
can never be hit.

To ensure these are correct, add static_assert lines that verify
all the remaining aliases are in fact identical to the canonical
name.

Fixes: 57f5677e535b ("printf: add support for printing symbolic error names")
Cc: Petr Mladek <pmladek@suse.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/all/20210514213456.745039-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927123409.1109737-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230206194126.380350-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf record: Fix segfault with --overwrite and --max-size

[ Upstream commit 91621be65d6812cd74b2ea09573ff9ee0cbf5666 ]

When --overwrite and --max-size options of perf record are used
together, a segmentation fault occurs. The following is an example:

  # perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1
  [ perf record: Woken up 1 times to write data ]
  perf: Segmentation fault
  Obtained 12 stack frames.
  ./perf/perf(+0x197673) [0x55f99710b673]
  /lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f]
  ./perf/perf(+0x8eb40) [0x55f997002b40]
  ./perf/perf(+0x1f6882) [0x55f99716a882]
  ./perf/perf(+0x794c2) [0x55f996fed4c2]
  ./perf/perf(+0x7b7c7) [0x55f996fef7c7]
  ./perf/perf(+0x9074b) [0x55f99700474b]
  ./perf/perf(+0x12e23c) [0x55f9970a223c]
  ./perf/perf(+0x12e54a) [0x55f9970a254a]
  ./perf/perf(+0x7db60) [0x55f996ff1b60]
  /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86]
  ./perf/perf(+0x7dfe9) [0x55f996ff1fe9]
  Segmentation fault (core dumped)

backtrace of the core file is as follows:

  (gdb) bt
  #0  record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234
  #1  record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242
  #2  record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263
  #3  process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618
  #4  0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658,
      from=from@entry=0) at util/synthetic-events.c:1895
  #5  0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658)
      at util/synthetic-events.c:1905
  #6  0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997
  #7  0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802
  #8  0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258
  #9  0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330
  #10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384
  #11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428
  #12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562

The reason is that record__bytes_written accesses the freed memory rec->thread_data,
The process is as follows:
  __cmd_record
    -> record__free_thread_data
      -> zfree(&rec->thread_data)         // free rec->thread_data
    -> record__synthesize
      -> perf_event__synthesize_id_index
        -> process_synthesized_event
          -> record__write
            -> record__bytes_written      // access rec->thread_data

We add a member variable "thread_bytes_written" in the struct "record"
to save the data size written by the threads.

Fixes: 6d57581659f72299 ("perf record: Add support for limit perf output file size")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: use printf instead of echo -ne

[ Upstream commit 9e34fad00fc889abbb99d751a4c22cf2bded10df ]

Rather than trying to guess which implementation of "echo" to run with
support for "-ne" options, use "printf" instead of "echo -ne". It
handles escape characters as a standard feature and it is widespread
among modern shells.

Reported-by: "kernelci.org bot" <bot@kernelci.org>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Fixes: 3297a4df805d ("kselftests: Enable the echo command to print newlines in Makefile")
Fixes: 79c16b1120fe ("selftests: find echo binary to use -ne options")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: Fix bash specific "==" operator

[ Upstream commit 1e6b485c922fbedf41d5a9f4e6449c5aeb923a32 ]

Since commit a1d6cd88c897 ("selftests/ftrace: event_triggers: wait
longer for test_event_enable") introduced bash specific "=="
comparation operator, that test will fail when we run it on a
posix-shell. `checkbashisms` warned it as below.

possible bashism in ftrace/func_event_triggers.tc line 45 (should be 'b = a'):
if [ "$e" == $val ]; then

This replaces it with "=".

Fixes: a1d6cd88c897 ("selftests/ftrace: event_triggers: wait longer for test_event_enable")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: find echo binary to use -ne options

[ Upstream commit 4ebe33398c40c1118b4d8546978036c0e0032d1b ]

Find the actual echo binary using $(which echo) and use it for
formatted output with -ne. On some systems, the default echo command
doesn't handle the -e option and the output looks like this (arm64
build):

-ne Emit Tests for alsa

-ne Emit Tests for amd-pstate

-ne Emit Tests for arm64

This is for example the case with the KernelCI Docker images
e.g. kernelci/gcc-10:x86-kselftest-kernelci. With the actual echo
binary (e.g. in /bin/echo), the output is formatted as expected (x86
build this time):

Emit Tests for alsa
Emit Tests for amd-pstate
Skipping non-existent dir: arm64

Only the install target is using "echo -ne" so keep the $ECHO variable
local to it.

Reported-by: "kernelci.org bot" <bot@kernelci.org>
Fixes: 3297a4df805d ("kselftests: Enable the echo command to print newlines in Makefile")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>