Kaustubh Raste [Tue, 20 Dec 2016 02:27:07 +0000 (02:27 +0000)]
Merge "Add mips msa vp9 intrapred tests"
Gabriel Marin [Mon, 19 Dec 2016 23:25:38 +0000 (23:25 +0000)]
Merge "Simplify address arithmetic in vp9_optimize_b"
James Zern [Mon, 19 Dec 2016 22:39:01 +0000 (22:39 +0000)]
Merge "vpx_idct32x32_1024_add_neon: quiet uninitialized warning"
Marco Paniconi [Mon, 19 Dec 2016 21:15:36 +0000 (21:15 +0000)]
Merge "vp9 denoiser: Fix the logic for re-evaluating zeromv after denoising."
Gabriel Marin [Wed, 14 Dec 2016 00:22:48 +0000 (16:22 -0800)]
Simplify address arithmetic in vp9_optimize_b
Simplify address arithmetic on token_costs to reduce the number of generated
instructions that are used for address arithmetic inside routine
vp9_optimize_b. It also helps improve instruction scheduling depending on
compiler and optimization level.
Measured a 9.3% reduction in retired instructions and 5.3% reduction in
execution time for this routine with GCC v4.8.4 and optimization flags -O3,
and a reduction of up to 11.6% in execution time with other compilers.
No change in behavior.
TEST=Verified that encoded files match bit for bit, with and without this
change.
BUG=b/
33678225
Change-Id: I6098650fb5cd2aa04e014fe6e68ca20761f3a21f
James Zern [Mon, 19 Dec 2016 18:51:59 +0000 (10:51 -0800)]
vpx_idct32x32_1024_add_neon: quiet uninitialized warning
relocate the assignment to 'in' outside of the for loop. this quiets a
spurious warning in visual studio builds since:
86e340c enable vpx_idct32x32_1024_add_neon in hbd builds
+ give the variable a more descriptive name
BUG=webm:1294
Change-Id: I5c3da5c7939621477e0fc0ad3a1b2a3045c5bffd
Marco [Sat, 17 Dec 2016 00:01:59 +0000 (16:01 -0800)]
vp9: With denoising on, only estimate noise level for higher resolns.
Allow it for resolns above 640x360 for now.
Change-Id: I087d0d8173f96b316164fdd4a499110ce2e7a233
Marco [Mon, 19 Dec 2016 17:22:44 +0000 (09:22 -0800)]
vp9 denoiser: Fix the logic for re-evaluating zeromv after denoising.
Correctly set interp_filter to SWITCHABLE for INTRA mode.
Also reduce threshold on noise level for re-evaluating zeromv.
Change-Id: Id32c01e193209fb380aa07204f0be3babf29f70a
Linfeng Zhang [Mon, 19 Dec 2016 17:09:26 +0000 (17:09 +0000)]
Merge "Clean hbd idct 4x4 neon functions and other"
Kaustubh Raste [Mon, 19 Dec 2016 11:56:17 +0000 (17:26 +0530)]
Add mips msa vp9 intrapred tests
Change-Id: I49b91464a87cad8692f4b1477e45e5f567b4fe87
Johann Koenig [Sat, 17 Dec 2016 01:12:34 +0000 (01:12 +0000)]
Merge "post proc test: add padding for sse2 tests"
Marco Paniconi [Fri, 16 Dec 2016 23:53:32 +0000 (23:53 +0000)]
Merge "vp9: Change condition to enable recheck_zeromv_after_denoising."
Marco [Fri, 16 Dec 2016 19:15:57 +0000 (11:15 -0800)]
vp9: Change condition to enable recheck_zeromv_after_denoising.
For when denoising enabled: change condition to enable
the recheck_zeromv_after_denoising for only very high noise level.
This is causing an issue, so enabling it for very high noise
to effectively shut it off.
Change-Id: Ic40d6025f3f398338cedd270d17c0ccd9a3daa84
Johann [Fri, 16 Dec 2016 22:03:53 +0000 (14:03 -0800)]
post proc test: add padding for sse2 tests
Avoid valgrind warnings for reading out of bounds when the width is not
divisible by 16.
Change-Id: I5670d7cfbbce00874b98cfb7472f99c7936c2c47
Johann [Fri, 16 Dec 2016 20:19:00 +0000 (12:19 -0800)]
postproc test: disable new down and across test
The new test is causing valgrind failures:
[ RUN ] SSE2/VpxPostProcDownAndAcrossMbRowTest.CheckCvsAssembly/0
==28923== Invalid read of size 16
28923== at 0x724016: ??? (deblock_sse2.asm:146)
Disable during investigation. The test is new but the code is not.
Change-Id: I5521e5fd48a595e3798b833bf7e3cc97b81c1975
Jim Bankoski [Fri, 16 Dec 2016 16:50:55 +0000 (08:50 -0800)]
vp8 : use threading mutex's for tsan only.
To avoid decode performance hit of 2% when running on hyperthreaded
cores.
This patch only uses the mutex's when we are running tsan.
This is safe because 32 bit operations like read and store are atomic
on all the platforms we care about. Tsan warns about race situations,
but in this case either situation ( read occurs before write or write
before read) the worst case is that we go around one extra time in the
loop. So the ordering doesn't really matter.
That said a few other things have been tried :
for instance as per here:
webrtc/base/atomicops.h#52
In this patch they use:
__atomic_load_n(i, __ATOMIC_ACQUIRE);
__atomic_store_n(i, value, __ATOMIC_RELEASE);
This code works on gcc, clang ( replacing protected write and read), and
avoids tsan errors. Incurring no penalty in performance. In C11 its
replaced by straight atomic operands.
However there is no equivalent in the visual studio's we support as
int32 on all windows platforms is already atomic. To avoid tsan like
warnings on windows we'd need to use interlocked exchange and the
end result doesn't gain us any thing.
Change-Id: I2066e3c7f42641ebb23d53feb1f16f23f85bcf59
Marco Paniconi [Thu, 15 Dec 2016 19:48:16 +0000 (19:48 +0000)]
Merge "vp9: Fix to usage of flag USE_ALTREF_FOR_ONE_PASS"
Johann [Tue, 13 Dec 2016 00:47:05 +0000 (16:47 -0800)]
postproc: neon down and across macroblock filter
Implement vpx_post_proc_down_and_across_mb_row in NEON.
Runs about 6-7x faster than C.
BUG=webm:1320
Change-Id: Ic5c7d3552a88cfcf999ec5bf2bd46fee460642c2
Marco [Wed, 14 Dec 2016 22:08:09 +0000 (14:08 -0800)]
vp9: Fix to usage of flag USE_ALTREF_FOR_ONE_PASS
The flag USE_ALTREF_FOR_ONE_PASS allows for alt-ref lookahead
in 1 pass vbr (from https://chromium-review.googlesource.com/#/c/365498).
This change is to make sure this macro flag only has effect if
the config flag cpi->oxcf.enable_auto_altef is also on.
No change in ytlive encoding, as USE_ALTREF_FOR_ONE_PASS is not
yet enabled.
Change-Id: I1a69681e4a15c5244581a3dab4587fca08f02e0f
Linfeng Zhang [Wed, 14 Dec 2016 18:42:01 +0000 (10:42 -0800)]
Clean hbd idct 4x4 neon functions and other
BUG=webm:1301
Change-Id: I387b7eae716a7df15c691dc6f368b07602df7342
Yaowu Xu [Wed, 14 Dec 2016 17:37:14 +0000 (09:37 -0800)]
Change order of operation to avoid ubsan warnings
This commit change an order of operation to avoid left shifts of
negative numbers.
Change-Id: I607c7eb91658c7a5ef397fc1504721d1b10e3dd6
Linfeng Zhang [Wed, 14 Dec 2016 17:05:34 +0000 (17:05 +0000)]
Merge "Update idct test code to test 8-bit & high bitdepth simultaneously"
Linfeng Zhang [Mon, 12 Dec 2016 20:53:22 +0000 (12:53 -0800)]
Update idct test code to test 8-bit & high bitdepth simultaneously
Change-Id: Icc0eb9c0ddf2a13ec832877a089450972134e8ec
James Bankoski [Wed, 14 Dec 2016 01:21:49 +0000 (01:21 +0000)]
Merge "Reapply 'Amend and improve VP8 multithreading implementation'"
James Zern [Wed, 7 Dec 2016 04:52:34 +0000 (20:52 -0800)]
enable vpx_idct32x32_1024_add_neon in hbd builds
BUG=webm:1294
Change-Id: Ibdda54e6d1303b0f73bc7bc71417e4041d7618de
Jim Bankoski [Tue, 13 Dec 2016 00:27:21 +0000 (16:27 -0800)]
Reapply 'Amend and improve VP8 multithreading implementation'
Reapply this patch:
ff0107f Amend and improve VP8 multithreading implementation
Amended the patch to add a unit test, and fix an asan error.
BUG=webm:851
Change-Id: I6572c03256169c64e80248bf5a5e99f59a2fc93c
Linfeng Zhang [Mon, 12 Dec 2016 23:13:22 +0000 (15:13 -0800)]
Cosmetics by unifying dest_stride to stride in idct
Change-Id: Ie9336a808a3c3592bb4fd5d4ad3839028bfcafba
James Bankoski [Sat, 10 Dec 2016 00:01:32 +0000 (00:01 +0000)]
Merge "vp8: adds multithread testing."
Marco Paniconi [Fri, 9 Dec 2016 23:47:01 +0000 (23:47 +0000)]
Merge "vp9: Fix to crash in svc code."
Jim Bankoski [Fri, 9 Dec 2016 23:05:59 +0000 (15:05 -0800)]
vp8: adds multithread testing.
The test is disabled because of TSAN errors until we resolve
BUG=webm:851
Change-Id: I0b21c8d815bc1ea365da024b1e2ee5e1fc5715c2
Johann [Fri, 9 Dec 2016 20:54:55 +0000 (12:54 -0800)]
Move load_and_transpose to transpose_neon.h
Allows for use outside the idcts without pulling in idct_neon.h
Change-Id: I4a94c1af3dac3e1b5bc8296ec9eab0ddcc8cfecf
Marco [Wed, 7 Dec 2016 17:50:27 +0000 (09:50 -0800)]
vp9: Fix to crash in svc code.
use_base_mv assumes 2x2 scaling, so fix is to shutoff
this feature unless spatial scale factors are 2.
Added svc unittest for 2 spatial layers with 5x5 scaling,
which generates the issue without this fix.
Also fix some settings in svc unittest:
let the speed setting vary (from 5 to 8), and enable static threshold.
BUG=webm:1344
Change-Id: Idfd0a6c633c21b49a0479601506302cfe974e30e
James Zern [Fri, 9 Dec 2016 03:19:16 +0000 (03:19 +0000)]
Merge "idct16x16_add_neon: fix arm visual studio builds"
Marco [Thu, 8 Dec 2016 23:25:07 +0000 (15:25 -0800)]
vp8 multi_res_encoder: Ajust some settings in sample encoder.
Set #threads to default 1 for all streams, change bit allocaton
for 3 temporal layers, and enable denoiser on middle resolution layer.
Change-Id: I4a57adbfdb2c319002b8f3cf359613842dc00d75
James Zern [Thu, 8 Dec 2016 21:02:30 +0000 (13:02 -0800)]
idct16x16_add_neon: fix arm visual studio builds
after:
2d3d95f enable vpx_idct16x16_256_add_neon in hbd builds
reorder INCLUDEs and fix indent of IF/ENDIFs
remove vpx_config.asm to avoid multiple symbol definitions in windows
builds and shift idct_neon.asm.S to the top to allow use of
CONFIG_VP9_HIGHBITDEPTH in the export list.
Change-Id: I0dacfbae62a6ec8fe4a26940c1a52da2dfad2029
Yunqing Wang [Thu, 8 Dec 2016 22:46:44 +0000 (22:46 +0000)]
Merge "Remove an unused first pass statistic"
Yunqing Wang [Wed, 7 Dec 2016 18:00:36 +0000 (10:00 -0800)]
Remove an unused first pass statistic
One of the first pass stats "new_mv_count" is no longer used in VP9,
and is removed. This also makes it easy to implement a multi-threaded
first pass. This change doesn't affect the coding performance, which
has been verified by borg tests.
Change-Id: I4c7c7bf9465fda838eb230814ef0c631c068c903
Marco Paniconi [Wed, 7 Dec 2016 22:06:01 +0000 (22:06 +0000)]
Merge "vp9: Fix some TODOs in svc code."
Linfeng Zhang [Wed, 7 Dec 2016 21:05:05 +0000 (21:05 +0000)]
Merge "Update TEST_P(PartialIDctTest, RunQuantCheck)"
Linfeng Zhang [Wed, 7 Dec 2016 21:03:21 +0000 (21:03 +0000)]
Merge "Update idct NEON optimization to not use narrowing saturating shift"
Marco [Wed, 7 Dec 2016 21:02:10 +0000 (13:02 -0800)]
vp9: Fix some TODOs in svc code.
Change-Id: Ie9f441245987ade9dab38af69adf4dd1fb38ca3f
James Zern [Wed, 7 Dec 2016 20:26:43 +0000 (20:26 +0000)]
Merge "enable vpx_idct16x16_256_add_neon in hbd builds"
Linfeng Zhang [Wed, 7 Dec 2016 19:34:00 +0000 (11:34 -0800)]
Update TEST_P(PartialIDctTest, RunQuantCheck)
1. Use correct projections when copying real dct/quant outputs.
2. Remove local random number generator and combine loops.
3. Quantization with minimum allowed step sizes instead of maximum.
This may generate larger inputs.
Change-Id: I154afc26230c894d564671cff4b8fd5485b69598
Marco Paniconi [Wed, 7 Dec 2016 19:31:13 +0000 (19:31 +0000)]
Merge "vp9: Adjust the weight factor for segment rate cost for aq-mode=3."
Linfeng Zhang [Tue, 22 Nov 2016 22:21:36 +0000 (14:21 -0800)]
Update idct NEON optimization to not use narrowing saturating shift
Change-Id: Iae517017217dbacd638d40fcfeeb0f4bba7b8b8b
James Zern [Tue, 29 Nov 2016 04:20:28 +0000 (20:20 -0800)]
enable vpx_idct16x16_256_add_neon in hbd builds
BUG=webm:1294
Change-Id: Ib421c150b0d29dee0a81390a612bf01a4a28cff1
James Zern [Wed, 7 Dec 2016 01:40:28 +0000 (01:40 +0000)]
Merge changes Ibad079f2,I7858a0a1
* changes:
enable vpx_idct16x16_10_add_neon in hbd builds
idct16x16,NEON: rm output_stride from pass1 fns
James Zern [Thu, 24 Nov 2016 04:48:00 +0000 (20:48 -0800)]
enable vpx_idct16x16_10_add_neon in hbd builds
BUG=webm:1294
Change-Id: Ibad079f25e673d4f5181961896a8a8333a51e825
James Zern [Wed, 30 Nov 2016 03:47:50 +0000 (19:47 -0800)]
idct16x16,NEON: rm output_stride from pass1 fns
vpx_idct16x16_256_add_neon_pass1, vpx_idct16x16_10_add_neon:
this was a constant 8 in all cases meaning the results are stored
contiguously, this allows the number of stores to be reduced.
Change-Id: I7858a0a15a284883ef45c13dfd97c308df9ea09e
Linfeng Zhang [Wed, 16 Nov 2016 21:22:50 +0000 (13:22 -0800)]
Refine 8-bit 8x8 idct NEON intrinsics
Change-Id: I4ec4ad1928ec2ed87f596f52f097bc52065278dd
Marco [Mon, 5 Dec 2016 20:05:35 +0000 (12:05 -0800)]
vp9: Adjust the weight factor for segment rate cost for aq-mode=3.
Use the segment weight factor based on the target (cr->percent_refresh)
if it less than the current estimate (avergae of past usage and target).
Small improvement at low bitrates.
Change-Id: Iba8fd909e203f94458901366d3a991f7ea854d49
Linfeng Zhang [Fri, 7 Oct 2016 00:01:30 +0000 (17:01 -0700)]
Check in vpx_lpf_vertical_4_dual_neon() assembly
This replaces its C version.
Change-Id: Ie39e9324305fdc0fff610ced608a037e44a85a1a
James Zern [Fri, 2 Dec 2016 04:01:27 +0000 (04:01 +0000)]
Merge changes I4afc130e,Iaa64d23f
* changes:
Add high bitdepth 4x4 idct NEON intrinsics
Update idct x86 intrinsics to not use saturated add and sub
Linfeng Zhang [Tue, 8 Nov 2016 23:20:18 +0000 (15:20 -0800)]
Add high bitdepth 4x4 idct NEON intrinsics
Change-Id: I4afc130effa05b8be2e9f982967216b1beb2ce4b
Linfeng Zhang [Wed, 23 Nov 2016 00:59:17 +0000 (16:59 -0800)]
Update idct x86 intrinsics to not use saturated add and sub
Change-Id: Iaa64d23fdb45ca1f235b0ea57e614516e548eca4
James Zern [Thu, 24 Nov 2016 01:21:26 +0000 (17:21 -0800)]
idct16x16,NEON,cosmetics: normalize fn signatures
+ remove unused parameters from vpx_idct16x16_10_add_neon_pass2
Change-Id: Ie5912a4abdd308fab589380bca054a2e7234a2c4
James Zern [Tue, 29 Nov 2016 00:12:45 +0000 (00:12 +0000)]
Merge changes Ide6d3994,I164cfcbe
* changes:
enable vpx_idct32x32_135_add_neon in hbd builds
idct_neon: rename load_tran_low_to_s16 -> ...s16q
James Zern [Mon, 28 Nov 2016 23:39:37 +0000 (23:39 +0000)]
Merge "build/make/Android.mk: correct rtcd template var refs"
James Bankoski [Mon, 28 Nov 2016 22:27:25 +0000 (22:27 +0000)]
Merge "svc_test: fix two warnings"
Jim Bankoski [Mon, 28 Nov 2016 20:53:39 +0000 (12:53 -0800)]
svc_test: fix two warnings
Use of possibly uninitialized variable and missing test initializer.
Change-Id: I2192c81c39ef4239cc11a309850c0ee8781ef17e
Jerome Jiang [Mon, 28 Nov 2016 18:08:12 +0000 (10:08 -0800)]
Cosmetic changes to variable names in deblocker tests.
Change kExpectedOutput to expected_output in function parameters in
the deblocker test.
Change-Id: I5baf8d1285ac47922950887406c7aa519ddc512a
James Zern [Fri, 25 Nov 2016 01:51:10 +0000 (17:51 -0800)]
build/make/Android.mk: correct rtcd template var refs
the expansion of findstring and rtcd_dep_template_CONFIG_ASM_ABIS needs
to be deferred until the block is parsed as makefile syntax rather than
eval time where rtcd_dep_template_CONFIG_ASM_ABIS will be unset. this
ensures vpx_config.asm is properly created.
Change-Id: I7c38c6c082da78397936467482789dd468adc316
James Zern [Thu, 24 Nov 2016 07:22:04 +0000 (07:22 +0000)]
Merge changes I6b4cd56e,I88f91b92
* changes:
Android.mk,armv7: fix idct_neon.asm.S creation
build/make/Android.mk: set/use qexec appropriately
James Zern [Wed, 23 Nov 2016 01:47:38 +0000 (17:47 -0800)]
enable vpx_idct32x32_135_add_neon in hbd builds
BUG=webm:1294
Change-Id: Ide6d3994fe01c4320c9d143e6d059b49568048e4
James Zern [Sat, 19 Nov 2016 04:25:17 +0000 (20:25 -0800)]
idct_neon: rename load_tran_low_to_s16 -> ...s16q
BUG=webm:1294
Change-Id: I164cfcbe9bc4511d1d04af9206cf351a0ec2957b
James Zern [Thu, 24 Nov 2016 03:31:25 +0000 (03:31 +0000)]
Merge changes Icc4ead05,Ib019964b,I3b5fd3b3,Ieedadee2
* changes:
Update vpx_idct4x4_16_add_neon() to pass SingleExtremeCoeff test
Refine 8-bit 4x4 idct NEON intrinsics
Add idct speed test.
Update partial_idct_test.cc to support high bitdepth
Jerome Jiang [Thu, 24 Nov 2016 01:56:34 +0000 (01:56 +0000)]
Merge "Change C/MSA post proc to match SSE2."
Jerome Jiang [Thu, 24 Nov 2016 01:56:22 +0000 (01:56 +0000)]
Merge "Cover more filter levels in unit tests for post proc."
James Zern [Thu, 24 Nov 2016 00:49:19 +0000 (16:49 -0800)]
Android.mk,armv7: fix idct_neon.asm.S creation
force this to be created before any other .S files. this change
additionally removes the file from the source list as it doesn't need to
be compiled on its own.
Change-Id: I6b4cd56ef6059d08f75f06fb749cddf76e0e165e
James Zern [Thu, 24 Nov 2016 00:46:50 +0000 (16:46 -0800)]
build/make/Android.mk: set/use qexec appropriately
commands are echo'd when V=1; libs.mk depends on this variable as well
Change-Id: I88f91b9260f16686cfccdf6bd3f29d246521b62e
Marco [Tue, 22 Nov 2016 00:37:32 +0000 (16:37 -0800)]
vp9: Adjust cyclic refresh parameters for low bitrates.
Increase the motion threshold and qp-delta for segment#2 boost.
This can increase the frame-drop at low bitrates, but generally
better spatial quality.
Only affects real-time mode with aq-mode=3, at very low bitrates.
Change-Id: I5ccb784667f70d0c27d369806b93b1f93d5605d1
James Zern [Wed, 23 Nov 2016 19:27:20 +0000 (19:27 +0000)]
Merge "use storage.googleapis for testdata download"
Jerome Jiang [Sat, 19 Nov 2016 01:11:59 +0000 (17:11 -0800)]
Change C/MSA post proc to match SSE2.
BUG=webm:1321
Change-Id: I719023375dc48cf7d8ed72188853f0f1ccc4ad7f
Jerome Jiang [Sat, 19 Nov 2016 01:07:20 +0000 (17:07 -0800)]
Cover more filter levels in unit tests for post proc.
For some filter level, the C/MSA doesn't match SSE2. Part of unit tests
are disabled. They will be re-enabled when C/MSA funcs are fixed.
BUG=webm:1321
Change-Id: Ib16b98b5eecb15d2252aa4ea267b782ee2b27533
Marco Paniconi [Wed, 23 Nov 2016 18:15:58 +0000 (18:15 +0000)]
Merge "vp9: Use more aggressive skip when short_circuit_low_temp_var = 1."
James Zern [Wed, 23 Nov 2016 07:03:12 +0000 (23:03 -0800)]
use storage.googleapis for testdata download
replace downloads.webmproject.org with the canonical
storage.googleapis.com/... form. this appears less likely to fail when
dealing with multiple concurrent connections.
Change-Id: I0dcbd04df9e4057fa851f458b3ef7e3589f1f2f1
James Zern [Wed, 23 Nov 2016 00:43:21 +0000 (00:43 +0000)]
Merge "avoid redefining WIN32_LEAN_AND_MEAN"
James Zern [Wed, 23 Nov 2016 00:42:24 +0000 (00:42 +0000)]
Merge "vp9,read_inter_block_mode_info: quiet msan warning"
James Zern [Tue, 22 Nov 2016 02:20:33 +0000 (18:20 -0800)]
vp9,read_inter_block_mode_info: quiet msan warning
best_sub8x8[1] won't be used meaningfully when is_compound is false, but
may trigger an msan warning as the value is copied around and later
clamped.
BUG=667044
Change-Id: Icc24c3b72cdb550bebea44d4aaa4ff8bf3fbab56
Linfeng Zhang [Tue, 22 Nov 2016 23:20:53 +0000 (23:20 +0000)]
Merge "Add 32x32 d45 and 8x8, 16x16, 32x32 d135 NEON intra prediction"
James Zern [Tue, 22 Nov 2016 23:15:53 +0000 (15:15 -0800)]
avoid redefining WIN32_LEAN_AND_MEAN
fixes redef errors when the macro is supplied elsewhere, e.g., the
command line
Change-Id: Ic15726817a43e30595d50562ef1f077060c193cf
Marco [Tue, 22 Nov 2016 18:10:06 +0000 (10:10 -0800)]
vp9: Use more aggressive skip when short_circuit_low_temp_var = 1.
Use the same feature as https://chromium-review.googlesource.com/#/c/411327/,
but allow it to be used for speed = 6 and 7, where
short_circuit_low_temp_var = 1.
Speed up of ~2-3% for speed 7, with little/no loss in compression.
Change-Id: I263a0f261ad9929034392d68f0153dc6376fdb5f
Jerome Jiang [Tue, 22 Nov 2016 21:35:12 +0000 (13:35 -0800)]
Cosmetic changes to post proc unit tests.
Remove unnecessary "virtual" before some functions. Change *_btm_* in
variable names to *_bottom_*.
Change-Id: Ifd4ce667537617f451cdfed47dd8c48817fd983b
James Zern [Tue, 22 Nov 2016 20:14:12 +0000 (20:14 +0000)]
Merge "build/make/Android.mk: use -fPIC w/ENABLE_SHARED=1"
Linfeng Zhang [Tue, 22 Nov 2016 19:35:05 +0000 (11:35 -0800)]
Update vpx_idct4x4_16_add_neon() to pass SingleExtremeCoeff test
Change-Id: Icc4ead05506797d12bf134e8790443676fef5c10
James Bankoski [Tue, 22 Nov 2016 19:34:16 +0000 (19:34 +0000)]
Merge "vp9-tests : split VpxEncoderThreadTest into two tests."
Linfeng Zhang [Tue, 15 Nov 2016 18:21:35 +0000 (10:21 -0800)]
Refine 8-bit 4x4 idct NEON intrinsics
Change-Id: Ib019964bfcbce7aec57d8c3583127f9354d3c11f
Linfeng Zhang [Tue, 8 Nov 2016 01:23:38 +0000 (17:23 -0800)]
Add idct speed test.
Change-Id: I3b5fd3b36cac1fb3a93e27fd8fd0781c91d412ce
Linfeng Zhang [Fri, 4 Nov 2016 18:24:47 +0000 (11:24 -0700)]
Update partial_idct_test.cc to support high bitdepth
BUG=webm:1301
Change-Id: Ieedadee221ce539e39bf806c41331f749f891a3c
Jim Bankoski [Tue, 22 Nov 2016 15:31:04 +0000 (07:31 -0800)]
vp9-tests : split VpxEncoderThreadTest into two tests.
VpxEncoderThreadTest was taking a very long time for some runs and
timing out a lot. This is an attempt to split the test into runs
that can be run nightly ( speeds 2 through 9) and runs that can
be run weekly ( speeds 0-1 ).
Change-Id: Iee6f61a561006d3a30381dd3b52b9a4dce07a70c
Kaustubh Raste [Tue, 22 Nov 2016 12:19:17 +0000 (17:49 +0530)]
Fix mips dspr2 build warning
Change-Id: Ia8fb3ed124f01384e7896e309c9ff22c05b40719
Yaowu Xu [Mon, 21 Nov 2016 18:49:56 +0000 (10:49 -0800)]
Add validation of frame_parallel_decoding_mode
This is a boolean value that is written into bitstream, any value other
than 0 or 1 could have led to unexpected behavior. This commit fix the
issue by adding validation of the value to make sure it is boolean.
BUG=webm:1339
Change-Id: I2d3e69e8dbefcab9a0db9cb39a91a40ce531c5a1
Jingning Han [Sat, 19 Nov 2016 04:12:55 +0000 (04:12 +0000)]
Merge "Enable asymptotic closed-loop encoding decision"
Kaustubh Raste [Sat, 19 Nov 2016 03:37:29 +0000 (03:37 +0000)]
Merge "Fix SingleLargeCoeff idct test"
James Zern [Sat, 19 Nov 2016 03:11:55 +0000 (19:11 -0800)]
vpx_temporal_svc_encoder.sh: fix comment (// -> #)
Change-Id: Ib13152a9ff523b1c29e8519e4f7ed01ad9874525
James Zern [Sat, 19 Nov 2016 02:53:22 +0000 (18:53 -0800)]
build/make/Android.mk: use -fPIC w/ENABLE_SHARED=1
fixes reloc errors like:
R_X86_64_PC32
vpx_dsp/x86/deblock_sse2.o:
requires dynamic R_X86_64_PC32 reloc against 'vpx_rv' which may overflow
at runtime
Change-Id: I218fc0e7c8258197f890d395f335e5a4fe82dccb
James Zern [Sat, 19 Nov 2016 01:29:37 +0000 (01:29 +0000)]
Merge "Clean horizontal intra prediction NEON optimization"
James Zern [Fri, 18 Nov 2016 20:02:43 +0000 (20:02 +0000)]
Merge "partial_idct_test: s/SingleLargeCoef/SingleExtremeCoeff/"
Jerome Jiang [Fri, 18 Nov 2016 00:23:45 +0000 (00:23 +0000)]
Merge "Change *_xmm to *_sse2 in deblocker assembly functions."
Jerome Jiang [Thu, 17 Nov 2016 19:09:29 +0000 (11:09 -0800)]
Change *_xmm to *_sse2 in deblocker assembly functions.
Some cosmetic changes because xmm is an anachronism.
Change-Id: I436a5b78a3c52776c20d6640939311f2a84a9bc7