ixgbe: Combine post-DMA processing of sk_buff fields into single function

This change combines a number of post-DMA Rx packet processing functions
into a single function.  The advantage of this is that it combines most of
the Rx descriptor processing into one spot so it should all be warm in the
cache.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Drop the _ADV of descriptor macros since all ixgbe descriptors are ADV

It doesn't make much sense to differentiate between advanced and legacy
descriptors when the only descriptors that ixgbe uses are advanced
descriptors.  As such we can drop the _ADV suffix since all ixgbe
descriptors are automatically advanced.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Add function for testing status bits in Rx descriptor

This change adds a small function for testing Rx status bits in the
descriptor.  The advantage to this is that we can avoid unnecessary
byte swaps on big endian systems.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Let the Rx buffer allocation clear status bits instead of cleanup

This change makes it so that we always clear the status/error bits in the
Rx descriptor in the allocation path instead of the cleanup path.  The
advantage to this is that we spend less time modifying data.  As such we
can modify the data once and then let it go cold in the cache instead of
writing it, reading it, and then writing it again.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Address fact that RSC was not setting GSO size for incoming frames

This patch is meant to address the fact that RSC has not been setting the
gso_size value on the skb.  As a result performance on lossy TCP
connections was negatively impacted.  This change resolves the issue by
setting gso_size to the average size for incoming packets.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Minor refactor of RSC

This change addresses several issue.

First I had left the use of the next and prev skb pointers floating around
in the code and they were overdue to be pulled since I had rewritten the
RSC code in the out-of-tree driver some time ago to address issues brought
up by David Miller in regards to this.

I am also now defaulting to always leaving the first buffer unmapped on any
packet and then unmapping it after we read the EOP descriptor.  This allows
a simplification of the path with less branching.

Instead of counting packets received the code was changed some time ago to
track the number of buffers received.  This leads to inaccurate counting
when you compare numbers of packets received by the hardware versus what is
tracked by the software.  To correct this I am revising things so that the
append_cnt value for RSC accurately tracks the number of frames received.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: fix warning about unused function

This patch fixes a warning about unused function when CONFIG_PM_SLEEP
is not selected in the kernel config:

igb_main.c: warning: `igb_suspend` defined but not used [W-unused-function]

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: replace '1' with 'true' for boolean get_link_status

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: pass pointer to hw struct for e1000_init_mac_params_XXX()

The e1000_init_mac_params_XXX() functions (where XXX is one of the three
MAC-family types 80003es2lan, 82571 and ich8lan) was not meant to require a
pointer to the adapter struct but does require a pointer to the hw struct.
Pass that pointer in to the functions instead.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: use true/false for bool autoneg_false

v2 - replaced mac->autoneg_failed == false with !mac->autoneg_failed

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: remove unnecessary parentheses

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: remove unnecessary returns from void functions

...and convert some goto's which simply return to just return.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: remove test that is always false

warning: comparison of unsigned expression < 0 is always false

Remove an unnecessary test that is reported when compiling driver with W=1.
The test is unnecessary because Intel wired GbE hardware older (i.e. less)
than 82571 is not supported by this driver.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

cnic: Update VLAN ID during ISCSI_UEVENT_PATH_UPDATE

This will support the new VLAN attribute in the iSCSI iface file.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: set error flag when iSCSI connection fails

to speed up error recovery due to SPQ failures.  The error flag will
expedite the recovery process by skipping the timeouts.

Signed-off-by: Jeffrey Huang <huangjw@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netxen_nic: signedness bug in netxen_md_entry_err_chk()

"esize" should be signed because it can be negative here.  For example,
when we call it in netxen_parse_md_template(), it could be -1 from the
return value of netxen_md_L2Cache().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: add wake_up on write channel

To send commands on the write channel 8 buffers exist. If all
8 buffers are used, a wait is triggered on the write channel. When
such buffer are freed, a wake_up is needed. This patch adds the
missing wake_up in qeth_release_buffer().
This fix is especially important when running Communications
Controller for Linux on System z.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: add query OSA address table support

Add qeth device private ioctl to query the OSA address table.
This helps debugging hw related problems.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_iucv: allow retrieval of maximum message size

For HS transport the maximum message size depends on the MTU-size
of the HS-device bound to the AF_IUCV socket. This patch adds a
getsockopt option MSGSIZE returning the maximum message size that
can be handled for this AF_IUCV socket.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_iucv: change net_device handling for HS transport

This patch saves the net_device in the iucv_sock structure during
bind in order to fasten skb sending.
In addition some other small improvements are made for HS transport:
   - error checking when sending skbs
   - locking changes in afiucv_hs_callback_txnotify
   - skb freeing in afiucv_hs_callback_txnotify
And finally it contains code cleanup to get rid of iucv_skb_queue_purge.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_iucv: block writing if msg limit is exceeded

When polling on an AF_IUCV socket, writing should be blocked if the
number of pending messages exceeds a defined limit.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_iucv: remove IUCV-pathes completely

A SEVER is missing in the callback of a receiving SEVERED. This may
inhibit z/VM to remove the corresponding IUCV-path completely.
This patch adds a SEVER in iucv_callback_connrej (together with
additional locking.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev: ethernet dev_alloc_skb to netdev_alloc_skb

Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet
  - Removed extra skb->dev = dev after netdev_alloc_skb

Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev: ethernet dev_alloc_skb to netdev_alloc_skb

Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet
  - Removed extra skb->dev = dev after netdev_alloc_skb

Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Implement IPV6_UNICAST_IF socket option.

The IPV6_UNICAST_IF feature is the IPv6 compliment to IP_UNICAST_IF.

Signed-off-by: Erich E. Hoover <ehoover@mines.edu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Implement IP_UNICAST_IF socket option.

The IP_UNICAST_IF feature is needed by the Wine project.  This patch
implements the feature by setting the outgoing interface in a similar
fashion to that of IP_MULTICAST_IF.  A separate option is needed to
handle this feature since the existing options do not provide all of
the characteristics required by IP_UNICAST_IF, a summary is provided
below.

SO_BINDTODEVICE:
* SO_BINDTODEVICE requires administrative privileges, IP_UNICAST_IF
does not.  From reading some old mailing list articles my
understanding is that SO_BINDTODEVICE requires administrative
privileges because it can override the administrator's routing
settings.
* The SO_BINDTODEVICE option restricts both outbound and inbound
traffic, IP_UNICAST_IF only impacts outbound traffic.

IP_PKTINFO:
* Since IP_PKTINFO and IP_UNICAST_IF are independent options,
implementing IP_UNICAST_IF with IP_PKTINFO will likely break some
applications.
* Implementing IP_UNICAST_IF on top of IP_PKTINFO significantly
complicates the Wine codebase and reduces the socket performance
(doing this requires a lot of extra communication between the
"server" and "user" layers).

bind():
* bind() does not work on broadcast packets, IP_UNICAST_IF is
specifically intended to work with broadcast packets.
* Like SO_BINDTODEVICE, bind() restricts both outbound and inbound
traffic.

Signed-off-by: Erich E. Hoover <ehoover@mines.edu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gro: more generic L2 header check

Shlomo Pongratz reported GRO L2 header check was suited for Ethernet
only, and failed on IB/ipoib traffic.

He provided a patch faking a zeroed header to let GRO aggregates frames.

Roland Dreier, Herbert Xu, and others suggested we change GRO L2 header
check to be more generic, ie not assuming L2 header is 14 bytes, but
taking into account hard_header_len.

__napi_gro_receive() has special handling for the common case (Ethernet)
to avoid a memcmp() call and use an inline optimized function instead.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Shlomo Pongratz <shlomop@mellanox.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses

Commit a0417fa3a18a ("net: Make qdisc_skb_cb upper size bound
explicit.") made it possible for a netdev driver to use skb->cb
between its header_ops.create method and its .ndo_start_xmit
method.  Use this in ipoib_hard_header() to stash away the LL address
(GID + QPN), instead of the "ipoib_pseudoheader" hack.  This allows
IPoIB to stop lying about its hard_header_len, which will let us fix
the L2 check for GRO.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac: Fix typo in stmmac_pci.c

Correct spelling "regiser" to "register" in
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mace: Fix build for mace due to netdev_alloc_skb

Refs:
1. pmac32_defconfig
http://kisskb.ellerman.id.au/kisskb/buildresult/5583746/
2. ppc6xx_defconfig
http://kisskb.ellerman.id.au/kisskb/buildresult/5584116/

Confirmed any such occurances from all failed defconfigs &
in net-next sources with
grep -nrs "netdev_alloc_skb" drivers/net/ethernet/ | grep -v ","

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sonice: Fix build due to botched netdev_alloc_skb() conversion.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: remove duplicate initialization

"priv" is initialized twice.  I kept the second one, because it is next
to the check for NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sh-eth: use netdev stats structure and fix dma_map_single

No need to maintain a parallel net_device_stats structure in
sh_eth_private, since we have a generic one in netdev

Fix two dma_map_single() incorrect parameters, passing skb->tail instead
of skb->data. Seems that there is no corresponding dmap_unmap_single()
calls for the moment in this driver.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fec: Fix build due to wrong dev annotation

commit 21a4e469 (netdev: ethernet dev_alloc_skb to netdev_alloc_skb)
should have used "ndev" instead of "dev".

This causes the following build errors:

drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_rx':
drivers/net/ethernet/freescale/fec.c:714: error: 'dev' undeclared (first use in this function)
drivers/net/ethernet/freescale/fec.c:714: error: (Each undeclared identifier is reported only once
drivers/net/ethernet/freescale/fec.c:714: error: for each function it appears in.)
drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers':
drivers/net/ethernet/freescale/fec.c:1213: error: 'dev' undeclared (first use in this function)

Fix it, so that fec driver can be built again.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: sch_plug - Queue traffic until an explicit release command

The qdisc supports two operations - plug and unplug. When the
qdisc receives a plug command via netlink request, packets arriving
henceforth are buffered until a corresponding unplug command is received.
Depending on the type of unplug command, the queue can be unplugged
indefinitely or selectively.

This qdisc can be used to implement output buffering, an essential
functionality required for consistent recovery in checkpoint based
fault-tolerance systems. Output buffering enables speculative execution
by allowing generated network traffic to be rolled back. It is used to
provide network protection for Xen Guests in the Remus high availability
project, available as part of Xen.

This module is generic enough to be used by any other system that wishes
to add speculative execution and output buffering to its applications.

This module was originally available in the linux 2.6.32 PV-OPS tree,
used as dom0 for Xen.

For more information, please refer to http://nss.cs.ubc.ca/remus/
and http://wiki.xensource.com/xenwiki/Remus

Changes in V3:
  * Removed debug output (printk) on queue overflow
  * Added TCQ_PLUG_RELEASE_INDEFINITE - that allows the user to
    use this qdisc, for simple plug/unplug operations.
  * Use of packet counts instead of pointers to keep track of
    the buffers in the queue.

Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Brendan Cully <brendan@cs.ubc.ca>
[author of the code in the linux 2.6.32 pvops tree]
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tipc_net-next' of git://git./linux/kernel/git/paulg/linux

e1000e: minor whitespace and indentation cleanup

Cleanup of some whitespace and indentation of a single code block.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: fix sparse warnings with -D__CHECK_ENDIAN__

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: fix checkpatch warning from MINMAX test

WARNING: min() should probably be min_t(unsigned int, 4, skb->data_len)

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: cleanup - use braces in both branches of a conditional statement

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: cleanup e1000_set_phys_id

Use the existing hw pointer.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: cleanup e1000_init_mac_params_82571()

Combine two switch statements into one, convert a nebulous pointer to one
that is a bit more in keeping with the rest of the driver code and cleanup
some coding style.  No change in functionality, just cosmetic changes.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: cleanup e1000_init_mac_params_80003es2lan()

Combine two switch statements into one, convert a nebulous pointer to one
that is a bit more in keeping with the rest of the driver code and remove
some dead code (there are no 80003es2lan devices with fiber).  No change in
functionality, just cosmetic changes.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: cleanup - check return values consistently

The majority of the e1000e code checks most function return values using a
test like 'if (ret_val)' or 'if (!ret_val)' but there are a few instances
of 'if (ret_val == 0)'.  This patch converts the latter to the former for
consistency.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: add missing initializers reported when compiling with W=1

warning: missing initializer

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000: Adding e1000_dump function

When TX hang occurs e1000_dump prints TX ring, RX ring and Device registers.

Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igbvf: refactor Interrupt Throttle Rate code

The existing ITR code is broken and confusing, with lots of similarly-named
variables that do different things. Additionally, after the driver carefully
determines the optimal interrupt rate for the adapter, it then
ignores it and always writes a fixed, suboptimal value.

This patch refactors that code to make variable names more descriptive of
what they actually do, and then actually writes the calculated result to
the hardware.

Preliminary testing shows that netperf TCP_STREAM tests goes from ~918Mbps
to ~940Mbps, and TCP_RR goes from ~2k transactions/sec up to > 8k.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

tipc: Minor optimization to rejection of connection-based messages

Modifies message rejection logic so that TIPC doesn't attempt to
send a FIN message to the rejecting port if it is known in advance
that there is no such message because the rejecting port doesn't exist.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Eliminate alteration of publication key during name table purging

Removes code that alters the publication key of a name table entry
that is being forcibly purged from TIPC's name table after contact
with the publishing node has been lost.

Current TIPC ensures that all defunct names are purged before
re-establishing contact with a failed node.  There used to be a risk
that the publication might be accidentally deleted because it might be
re-added to the name table before the purge operation was completed.
But now there is no longer a need to ensure that the new key is different
than the old one.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Prevent loss of fragmented messages over broadcast link

Modifies broadcast link so that an incoming fragmented message is not
lost if reassembly cannot begin because there currently is no buffer
big enough to hold the entire reassembled message. The broadcast link
now ignores the first fragment completely, which causes the sending node
to retransmit the first fragment so that reassembly can be re-attempted.

Previously, the sender would have had no reason to retransmit the 1st
fragment, so we would never have a chance to re-try the allocation.

To do this cleanly without duplicaton, a new bclink_accept_pkt()
function is introduced.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Prevent loss of fragmented messages over unicast links

Modifies unicast link endpoint logic so an incoming fragmented message
is not lost if reassembly cannot begin because there is no buffer big
enough to hold the entire reassembled message. The link endpoint now
ignores the first fragment completely, which causes the sending node to
retransmit the first fragment so that reassembly can be re-attempted.

Previously, the sender would have had no reason to retransmit the 1st
fragment, so we would never have a chance to re-try the allocation.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>

tipc: Remove obsolete broadcast tag capability

Eliminates support for the broadcast tag field, which is no longer
used by broadcast link NACK messages.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Major redesign of broadcast link ACK/NACK algorithms

Completely redesigns broadcast link ACK and NACK mechanisms to prevent
spurious retransmit requests in dual LAN networks, and to prevent the
broadcast link from stalling due to the failure of a receiving node to
acknowledge receiving a broadcast message or request its retransmission.

Note: These changes only impact the timing of when ACK and NACK messages
are sent, and not the basic broadcast link protocol itself, so inter-
operability with nodes using the "classic" algorithms is maintained.

The revised algorithms are as follows:

1) An explicit ACK message is still sent after receiving 16 in-sequence
messages, and implicit ACK information continues to be carried in other
unicast link message headers (including link state messages).  However,
the timing of explicit ACKs is now based on the receiving node's absolute
network address rather than its relative network address to ensure that
the failure of another node does not delay the ACK beyond its 16 message
target.

2) A NACK message is now typically sent only when a message gap persists
for two consecutive incoming link state messages; this ensures that a
suspected gap is not confirmed until both LANs in a dual LAN network have
had an opportunity to deliver the message, thereby preventing spurious NACKs.
A NACK message can also be generated by the arrival of a single link state
message, if the deferred queue is so big that the current message gap
cannot be the result of "normal" mis-ordering due to the use of dual LANs
(or one LAN using a bonded interface). Since link state messages typically
arrive at different nodes at different times the problem of multiple nodes
issuing identical NACKs simultaneously is inherently avoided.

3) Nodes continue to "peek" at NACK messages sent by other nodes. If
another node requests retransmission of a message gap suspected (but not
yet confirmed) by the peeking node, the peeking node forgets about the
gap and does not generate a duplicate retransmit request. (If the peeking
node subsequently fails to receive the lost message, later link state
messages will cause it to rediscover and confirm the gap and send another
NACK.)

4) Message gap "equality" is now determined by the start of the gap only.
This is sufficient to deal with the most common cases of message loss,
and eliminates the need for complex end of gap computations.

5) A peeking node no longer tries to determine whether it should send a
complementary NACK, since the most common cases of message loss don't
require it to be sent. Consequently, the node no longer examines the
"broadcast tag" field of a NACK message when peeking.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Add missing locks in broadcast link statistics accumulation

Ensures that all attempts to update broadcast link statistics are done
only while holding the lock that protects the link's main data structures,
to prevent interference by simultaneous updates caused by messages
arriving on other interfaces.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Fix bug in broadcast link duplicate message statistics

Modifies broadcast link so that it increments the "received duplicate
message" count if an incoming message cannot be added to the deferred
message queue because it is already present in the queue. (The aligns
broadcast link behavior with that of TIPC's unicast links.)

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Fix node lock reclamation issues in broadcast link reception

Fixes a pair of problems in broadcast link message reception code
relating to the reclamation of the node lock after consuming an
in-sequence message.

1) Now retests to see if the sending node is still up after reclaiming
   the node lock, and bails out if it is non-operational.

2) Now manipulates the node's deferred message queue only after
   reclaiming the node lock, rather than using queue head pointer
   information that was cached previously.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Add missing broadcast link lock when sending NACK

Ensures that any attempt to send a NACK message over TIPC's broadcast
link has exclusive access to the link's main data structures, to prevent
interference with a simultaneous attempt to send other broadcast link
traffic (such as application-generated multicast messages).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Fix problem with broadcast link synchronization between nodes

Corrects a problem in which a link endpoint that activates as the
result of receiving a RESET/STATE sequence of link protocol messages
fails to properly record the broadcast link status information about
the node to which it is now communicating with. (The problem does
not occur with the more common RESET/ACTIVATE sequence of messages.)
The fix ensures that the broadcast link status info is updated after
the RESET message resets the link endpoint, rather than before, thereby
preventing new information from being overwritten by the reset operation.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Ensure broadcast link re-acquires node after link failure

Fix a bug that can prevent TIPC from sending broadcast messages to a node
if contact with the node is lost and then regained. The problem occurs if
the broadcast link first clears the flag indicating the node is part of the
link's distribution set (when it loses contact with the node), and later
fails to restore the flag (when contact is regained); restoration fails
if contact with the node is regained by implicit unicast link activation
triggered by the arrival of a data message, rather than explicitly by the
arrival of a link activation message.

The broadcast link now uses separate fields to track whether a node is
theoretically capable of receiving broadcast messages versus whether it is
actually part of the link's distribution set. The former member is updated
by the receipt of link protocol messages, which can occur at any time; the
latter member is updated only when contact with the node is gained or lost.
This change also permits the simplification of several conditional
expressions since the broadcast link's "supported" field can now only be
set if there are working links to the associated node.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Prevent broadcast link stalling in dual LAN environments

Ensure that sequence number information about incoming broadcast link
messages is initialized only by the activation of the first link to a
given cluster node.  Previously, a race condition allowed reset and/or
activation messages for a second link to re-initialize this sequence
number information with obsolete values. This could trigger TIPC to
request the retransmission of previously acknowledged broadcast link
messages from that node, resulting in broadcast link processing becoming
stalled if the node had already released one or more of those messages
and was unable to perform the required retransmission.

Thanks to Laser <gotolaser@gmail.com> for identifying this problem
and assisting in the development of this fix.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: Prevent transmission of outdated link protocol messages

Ensures that a link endpoint discards any previously deferred link
protocol message whenever it attempts to send a new one.

Previously, it was possible for a link protocol message that was unsent
due to congestion to be transmitted after newer protocol messages had
been sent. The stale link protocol message might then cause the receiving
link endpoint to malfunction because of its outdated conent.

Thanks to Osamu Kaminuma [okaminum@avaya.com] for diagnosing the problem
and contributing a prototype patch.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

tipc: improve the link deferred queue insertion algorithm

Re-code the algorithm for inserting an out-of-sequence message into
a unicast or broadcast link's deferred message queue.  It remains
functionally equivalent but should be easier to understand/maintain.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next

net: Make qdisc_skb_cb upper size bound explicit.

Just like skb->cb[], so that qdisc_skb_cb can be encapsulated inside
of other data structures.

This is intended to be used by IPoIB so that it can remember
addressing information stored at hard_header_ops->create() time that
it can fetch when the packet gets to the transmit routine.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
drivers/net/wireless/rtlwifi/rtl8192se/sw.c

netdev: ethernet dev_alloc_skb to netdev_alloc_skb

Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet
  - Removed extra skb->dev = dev after netdev_alloc_skb

Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev: ethernet dev_alloc_skb to netdev_alloc_skb

Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet
  - Removed extra skb->dev = dev after netdev_alloc_skb

Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev: ethernet dev_alloc_skb to netdev_alloc_skb

Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet
  - Removed extra skb->dev = dev after netdev_alloc_skb

Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Add FCoE parity error recovery

When bnx2x returns error on FCoE SPQ messages, generate an error
completion to bnx2fc immediately to speed up error recovery.  This
will eliminate length timeouts and spped up the reset of the device.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2: Add missing memory barrier in bnx2_start_xmit()

Sync DMA descriptor before hitting the TX mailbox for weak memory model
CPUs.

There has been discussions several years ago about this.  Some believe
that writel() should guarantee ordering.  Others want explicit barriers
if necessary.  Today writel() does not have the ordering guarantee and
many other drivers use explicit barriers.

Signed-off-by: Vlad Zolotarov <vlad@scalemp.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2: Add support for ethtool --show-channels|--set-channels

Allow the user to override the default number of RSS/TSS rings.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: Fix misspelling of "since"

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: caifdev is never used in net/caif/caif_dev.c::transmit() - remove it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

decnet: remove unused variable from dn_output()

The variable 'neigh' is assigned to, but otherwise completely
unused. So let's remove it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/hyperv: Remove the unnecessary memset in rndis_filter_send()

The memory has been allocated by kzalloc, so it's unnecessary to memset
again.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/hyperv: Correct the assignment in netvsc_recv_callback()

The first assignment to variable "net" is wrong, but overridden by the
latter assignments. So the bug isn't manifested.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/hyperv: Convert camel cased variables in rndis_filter.c to lower cases

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://gitorious.org/linux-can/linux-can-next

Conflicts:
drivers/net/can/usb/ems_usb.c

Minor dev_warn --> netdev_warn conversion conflicts.

Merge git://git./linux/kernel/git/davem/net

mlx4: Fix typo in cmd.c

Correct spelling "reseting" to "resetting" in
drivers/net/ethernet/mellanox/mlx4/cmd.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netprio_cgroup: Fix obo in get_prioidx

It was recently pointed out to me that the get_prioidx function sets a bit in
the prioidx map prior to checking to see if the index being set is out of
bounds.  This patch corrects that, avoiding the possiblity of us writing beyond
the end of the array

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
CC: Stanislaw Gruszka <sgruszka@redhat.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

tms380tr: Fix cascading if/else tab abuse

Cascading "if/else if"'s are ugly.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless

be2net: Use new implementation of get mac list command

VFs use get mac list command to get their mac address. The format of
this command has changed. Update driver to use the new format.

Signed-off-by: Mammatha Edhala <mammatha.edhala@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Fix link status query command

Version number in query link status command is getting overwritten in
be_wrb_cmd_hdr_prepare() routine. Move the initialization to fix this
issue. Also initialize the domain field.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif-hsi: Add RX flip buffer

Implement RX flip buffer in the cfhsi_rx_done function,
piggy-backed frames is also supported.
This gives a significant performance gain for CAIF over HSI.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Add drop count for caif_net device.

Count dropped packets in CAIF Netdevice.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Kill debugfs vars for caif socket

Kill off the debug-fs exposed varaibles from caif_socket.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Update enic maintainers

Signed-off-by: Neel Patel <neepatel@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Check firmware capability before issuing firmware commands

Check if firmware supports a particular command by first checking capability
using devcmd CMD_CAPABILITY.

Signed-off-by: Neel Patel <neepatel@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Enable support for multiple hardware receive queues

This patch enables support for multiple receive queues. If multiple receive
queues are used ingress traffic is hashed into one of the receive queues based
on IP or TCP or both headers. The max number of supported receive queues per
vnic is 8.

Signed-off-by: Neel Patel <neepatel@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlge: Bumped driver version to 1.00.00.30.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlge: Fix memory leak in the process of refill

Driver was leaking memory when page allocation failures occurs.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlge: Removing needless print's which are not

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlge: Fixed invalid reference to ip header

we have copied skb into addr(page), skb->data doesn't contain ip
header information.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlge: Updating Schultz LICENSE.qlge file.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Fix API unlock

Log dump status.
Remove unmatched qlcnic_api_unlock call.
Update version to 5.0.26.

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Fix firmware abort code check.

Check bits 8-28 of peg_halt status register for firmware abort code.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: report valid speed and duplex status when link is down

Report valid link statistics when link is down.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: Stop pause ctrl frames on fw hang.

When firmware hang is detected, fw should stop sending pause control frames.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>