iio: accel: bmc150: Get mount-matrix from ACPI

bmc150 accelerometers with an ACPI hardware-id of BOSC0200 have an ACPI
method providing their mount-matrix, add support for retrieving this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201130141954.339805-3-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: bmc150: Check for a second ACPI device for BOSC0200

Some BOSC0200 acpi_device-s describe two accelerometers in a single ACPI
device. Normally we would handle this by letting the special
drivers/platform/x86/i2c-multi-instantiate.c driver handle the BOSC0200
ACPI id and let it instantiate 2 bmc150_accel type i2c_client-s for us.

But doing so changes the modalias for the first accelerometer
(which is already supported and used on many devices) from
acpi:BOSC0200 to i2c:bmc150_accel. The modalias is not only used
to load the driver, but is also used by hwdb matches in
/lib/udev/hwdb.d/60-sensor.hwdb which provide a mountmatrix to
userspace by setting the ACCEL_MOUNT_MATRIX udev property.

Switching the handling of the BOSC0200 over to i2c-multi-instantiate.c
will break the hwdb matches causing the ACCEL_MOUNT_MATRIX udev prop
to no longer be set. So switching over to i2c-multi-instantiate.c is
not an option.

Changes by Hans de Goede:
-Add explanation to the commit message why i2c-multi-instantiate.c
 cannot be used
-Also set the dev_name, fwnode and irq i2c_board_info struct members
 for the 2nd client

Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201130141954.339805-2-hdegoede@redhat.com
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198671
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: bmc150: Removed unused bmc150_accel_dat irq member

The bmc150_accel_dat struct irq member is only ever used inside
bmc150_accel_core_probe, drop it and just use the function argument
directly.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201130141954.339805-1-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up

Inspired by Andy Shevchenko's proposal to use get_unaligned_leXX().

The whole one time programable memory is treated as a single 64bit
little endian value.  Thus we can avoid a lot of messy handling
of fields overlapping byte boundaries by just loading and manipulating
it as an __le64 converted to a u64.  That lets us just use FIELD_GET()
and GENMASK() to extract the values desired.

Note only build tested. We need to use GENMASK_ULL and %llX formatters
to account for the larger types used in computing the various fields.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201128185156.428327-1-jic23@kernel.org
Link: https://lore.kernel.org/r/20201129184459.647538-1-jic23@kernel.org

iio:adc:ti-ads124s08: Fix alignment and data leak issues.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested.  This data is allocated with kzalloc() so no
data can leak apart from previous readings.

In this driver the timestamp can end up in various different locations
depending on what other channels are enabled.  As a result, we don't
use a structure to specify it's position as that would be misleading.

Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-9-jic23@kernel.org

iio:adc:ti-ads124s08: Fix buffer being too long.

The buffer is expressed as a u32 array, yet the extra space for
the s64 timestamp was expressed as sizeof(s64)/sizeof(u16).
This will result in 2 extra u32 elements.
Fix by dividing by sizeof(u32).

Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Jonathan Cameron<Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-8-jic23@kernel.org

iio:pressure:mpl3115: Force alignment of buffer

Whilst this is another case of the issue Lars reported with
an array of elements of smaller than 8 bytes being passed
to iio_push_to_buffers_with_timestamp(), the solution here is
a bit different from the other cases and relies on __aligned
working on the stack (true since 4.6?)

This one is unusual.  We have to do an explicit memset() each time
as we are reading 3 bytes into a potential 4 byte channel which
may sometimes be a 2 byte channel depending on what is enabled.
As such, moving the buffer to the heap in the iio_priv structure
doesn't save us much.  We can't use a nice explicit structure
on the stack either as the data channels have different storage
sizes and are all separately controlled.

Fixes: cc26ad455f57 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-7-jic23@kernel.org

iio:imu:bmi160: Fix alignment and data leak issues

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable array in the iio_priv() data with alignment
explicitly requested.  This data is allocated with kzalloc() so no
data can leak apart from previous readings.

In this driver, depending on which channels are enabled, the timestamp
can be in a number of locations.  Hence we cannot use a structure
to specify the data layout without it being misleading.

Fixes: 77c4ad2d6a9b ("iio: imu: Add initial support for Bosch BMI160")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-6-jic23@kernel.org

iio:imu:bmi160: Fix too large a buffer.

The comment implies this device has 3 sensor types, but it only
has an accelerometer and a gyroscope (both 3D).  As such the
buffer does not need to be as long as stated.

Note I've separated this from the following patch which fixes
the alignment for passing to iio_push_to_buffers_with_timestamp()
as they are different issues even if they affect the same line
of code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-5-jic23@kernel.org

iio:magnetometer:mag3110: Fix alignment and data leak issues.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv() data.
This data is allocated with kzalloc() so no data can leak apart from
previous readings.

The explicit alignment of ts is not necessary in this case but
does make the code slightly less fragile so I have included it.

Fixes: 39631b5f9584 ("iio: Add Freescale mag3110 magnetometer driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-4-jic23@kernel.org

iio:light:st_uvis25: Fix timestamp alignment and prevent data leak.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv()

This data is allocated with kzalloc() so no data can leak apart
from previous readings.

A local unsigned int variable is used for the regmap call so it
is clear there is no potential issue with writing into the padding
of the structure.

Fixes: 3025c8688c1e ("iio: light: add support for UVIS25 sensor")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-3-jic23@kernel.org

iio:light:rpr0521: Fix timestamp alignment and prevent data leak.

One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes).  This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here.  We close both issues by
moving to a suitable structure in the iio_priv().
This data is allocated with kzalloc() so no data can leak apart
from previous readings and in this case the status byte from the device.

The forced alignment of ts is not necessary in this case but it
potentially makes the code less fragile.

>From personal communications with Mikko:

We could probably split the reading of the int register, but it
would mean a significant performance cost of 20 i2c clock cycles.

Fixes: e12ffd241c00 ("iio: light: rpr0521 triggered buffer")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-2-jic23@kernel.org

iio:adc:ti-adc084s021 Tidy up endian types

By adding a few local variables and avoiding a void * for
a parameter we can easily make all the endian types explicit and
get rid of the warnings from sparse:

  CHECK   drivers/iio/adc/ti-adc084s021.c
drivers/iio/adc/ti-adc084s021.c:84:26: warning: incorrect type in assignment (different base types)
drivers/iio/adc/ti-adc084s021.c:84:26:    expected unsigned short [usertype]
drivers/iio/adc/ti-adc084s021.c:84:26:    got restricted __be16
drivers/iio/adc/ti-adc084s021.c:115:24: warning: cast to restricted __be16
drivers/iio/adc/ti-adc084s021.c:115:24: warning: cast to restricted __be16
drivers/iio/adc/ti-adc084s021.c:115:24: warning: cast to restricted __be16
drivers/iio/adc/ti-adc084s021.c:115:24: warning: cast to restricted __be16

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200722155103.979802-23-jic23@kernel.org

iio:trigger: rename try_reenable() to reenable() plus return void

As we no longer support a try again if we cannot reenable the trigger
rename the function to reflect this.   Also we don't do anything with
the value returned so stop it returning anything.  For the few drivers
that didn't already print an error message in this patch, add such
a print.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Christian Oder <me@myself5.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nishant Malpani <nish.malpani25@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Link: https://lore.kernel.org/r/20200920132548.196452-3-jic23@kernel.org

iio: Fix: Do not poll the driver again if try_reenable() callback returns non 0.

The original reason for this behaviour is long gone and no current
drivers are making use of this function correctly. Note however, that
you would be very unlucky to actually hit the problem as it would
require a bus comms failure in the callback.

This dates back a long way.  The original board on which I did a lot
of early IIO development only supported edge interrupts, but some of the
sensors were level interrupt based.  As such, the lis3l02dq driver did
a dance with checking a GPIO to identify if it should retrigger.
That was an unsustainable hack so we later just stopped supporting interrupts
for that particular combination.

There are a number of drivers where a fault on a bus read in the
try_reenable() callback will result in them returning non 0 and
incorrectly then causing iio_trigger_poll() to be called.

Anyhow, this handling is unused and causing issues so let us rip it out.
Link: https://lore.kernel.org/linux-iio/20200813075358.13310-1-lars@metafoo.de/
After this the try_reenable() naming makes no sense, so as a follow up
patch I'll rename it to simply reenable().  I haven't done that here
as it will add noise to the fix for backporting.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Christian Eggers <ceggers@arri.de>
Link: https://lore.kernel.org/r/20200920132548.196452-2-jic23@kernel.org

io:core: In iio_map_array_register() cleanup in case of error

In function iio_map_array_register() properly rewind in case of error.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1606571059-13974-2-git-send-email-LinoSanfilippo@gmx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:core: Introduce unlocked version of iio_map_array_unregister()

Introduce an unlocked version of iio_map_array_unregister(). This function
can help to unwind in case of error while the iio_map_list_lock mutex is
held.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1606571059-13974-1-git-send-email-LinoSanfilippo@gmx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/501ff8187d2df584ec978c7e7ec5c445c3d0741c.1606642528.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: add support to LSM6DSOP

Add support to STM LSM6DSOP (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsop.pdf

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/d3c459ad945ccd1a256f4a217128be214b0c024e.1606642528.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsmdsx: compact st_lsm6dsx_sensor_settings table

Shrink st_lsm6dsx_sensor_settings table size moving wai address info in
id array and remove duplicated code

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c43286938b2fe03ab3abdb5fc095ea6b950abcb1.1606557946.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe

at91_adc_probe_dt is now small enough to be merged back in at91_adc_probe.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-8-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings:iio:adc:remove triggers

The trigger child nodes are not necessary anymore as they are defined
directly by the driver, depending on the compatible string.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lore.kernel.org/r/20201128222818.1910764-7-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: at91_adc: rework trigger definition

Move the available trigger definition back in the driver to stop cluttering
the device tree. There is no functional change except that it actually
fixes the available triggers for at91sam9rl as it inherited the list from
at91sam9260 but actually has the triggers from at91sam9x5.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-6-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings:iio:adc:atmel, sama9260-adc: conversion to yaml from at91_adc.txt

There are a few things we would do differently in an ADC binding if we
were starting from scratch but we are stuck with what we have (which
made sense back when this was written!)

We may be able to tighten up some elements of this binding in the future
by careful checking of what values properties can actually take.

Note the unusual sign off chain is representative of the path this patch
took.

Jonathan wrote the patch, which was then included in a series by
Alexandre and ultimately applied by Jonathan.

[Alexandre Belloni: add sama5d3, remove atmel,adc-res and atmel,adc-res-names]

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-5-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings:iio:adc:remove atmel, adc-res and atmel, adc-res-names

Remove atmel,adc-res and atmel,adc-res-names as they are not necessary and
are handled by the driver. Also add sama5d3 to the list of possible chips.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: https://lore.kernel.org/r/20201128222818.1910764-4-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: at91_adc: rework resolution selection

Move the possible resolution values back to the driver. This removes the
atmel,adc-res and atmel,adc-res-names properties, leaving only
atmel,adc-use-res. As atmel,adc-res-names had to contain "lowres" and
"highres", those where already the only allowed values for
atmel,adc-use-res.

Also introduce a new compatible string for the sama5d3 as this is the only
one with a different resolution. Also it doesn't even have the LOWRES
bit.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-3-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: at91_adc: remove at91_adc_ids

The driver is DT only since commit ead1c9f376db ("iio: adc: at91_adc:
remove platform data and move defs in driver file"). Remove the leftover
platform_device_id array.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-2-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings:iio:potentiostat:ti,lmp91000: txt to yaml conversion.

There were a few parts of the example that did not conform to the
binding description and would not have worked with the Linux driver
as a result.  Fixed them whilst doing this conversion.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20201031181242.742301-11-jic23@kernel.org

dt-bindings:iio:light:capella,cm3605: txt to yaml conversion.

Simple conversion using the new iio-consumers.yaml binding in the
dt-schema.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201031181242.742301-10-jic23@kernel.org

dt-bindings:iio:afe:voltage-divider: txt to yaml conversion

Simple binding so straight forward conversion, though did require
adding a separate binding document for the max1027 to reflect
its abilities to provide channels to consumers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201031181242.742301-9-jic23@kernel.org

dt-bindings:iio:adc:maxim,max1027: Pull out to separate binding doc.

The afe/voltage-divider.yaml example uses this device with 2 properties
not provided by trivial-devices.yaml (spi-max-frequency and #io-channel-cells)

Solve that by creating a more specific binding doc.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Philippe Reynes <tremyfr@yahoo.fr>
Link: https://lore.kernel.org/r/20201031181242.742301-8-jic23@kernel.org

dt-bindings:iio:afe:current-sense-shunt: txt to yaml conversion.

Very simple binding. As such straight forward conversion.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201031181242.742301-7-jic23@kernel.org

dt-bindings:iio:afe:current-sense-amplifier: txt to yaml conversion.

Note this includes a fix in the example where we had *-mul instead of
*-mult.  The binding doc and driver agree that it should be *-mult

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201031181242.742301-6-jic23@kernel.org

dt-bindings:iio:adc:envelope-detector: txt to yaml conversion.

Straight forward format conversion.  The example in here is fun in
that it has 2 separate provider / consumer pairs.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201031181242.742301-5-jic23@kernel.org

dt-bindings:iio:potentiometer: give microchip,mcp4531 its own binding

We use this part in an example for the envelope detector. That showed
that we need to allow for the #io-channel-cells property which
trivial-devices.yaml does not.

It doesn't make sense to add that property to trivial-devices as
it only applies for those devices that can provide some sort of
DAC or ADC service to another device driver.  Hence solution will
be to pull some IIO devices out to have their own file on a case
by case basis.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201031181242.742301-4-jic23@kernel.org

dt-bindings:iio:dac:dpot-dac: yaml conversion.

Txt to yaml format conversion.  I dropped the example section
describing the measurement ADC, as that isn't strictly part
of this binding.

Uses the new dt-schema/schema/iio/iio-consumer.yaml schema.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20201031181242.742301-3-jic23@kernel.org

dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema

File contained generic IIO wide bindings.
Now part of the external dt-schema repository.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031181242.742301-2-jic23@kernel.org

dt-bindings:iio:adc:adi,ad7292: Use new adc.yaml binding for channels.

Also add additionalProperties: false for the child nodes.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20201031182423.742798-4-jic23@kernel.org

dt-bindings:iio:adc:adi,ad7124: Use the new adc.yaml channel binding

This both ensures this binding is compliant with the generic properties
and reduces the amount we need to specify in this separate binding.

Whilst here mark the child node as additionalProperties: false

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Link: https://lore.kernel.org/r/20201031182423.742798-3-jic23@kernel.org

dt-bindings:iio:adc: convert adc.txt to yaml

Each driver that uses this will need to use a $ref
We can't always enable it like most of the generic bindings due to
channel@X matching far more widely than IIO.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031182423.742798-2-jic23@kernel.org

dt-bindings:iio:health:ti,afe4404: txt to yaml conversion

This basically has same questions as for the afe4403.  We could combine
the two bindings, but as the drivers are separate and it would be a little
fiddly due to different buses let's keep the separating.
To repeat questions from the ti,afe4403 binding.

A few questions came up whilst converting this one.
1) What is actually required?
   - Checking Linux driver, interrupt is not, and the tx-supply could
     be supplied by a stub regulator as long as it's always on.
     As such I have reduced the required list to just compatible and reg.
2) What is the regulator called?
   - It's tx-supply in the binding doc, but the driver request tx_sup
     I will shortly send out a fix for the driver to match the binding
     doc which is the better choice of naming.

As Andrew's email is bouncing, I've put myself as temporary maintainer
for this binding until someone else steps up.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-9-jic23@kernel.org

dt-bindings:iio:health:ti,afe4403: txt to yaml binding

A few questions came up whilst converting this one.
1) What is actually required?
  - Checking Linux driver, interrupt is not, and the tx-supply could
    be supplied by a stub regulator as long as it's always on.
    As such I have reduced the required list to just compatible and reg.
2) What is the regulator called?
  - It's tx-supply in the binding doc, but the driver requests tx_sup.
    I'll post a fix patch to change the driver to fix this as it makes
    little sense.

Andrew's email is bouncing so until someone else steps up I have
listed myself as maintainer for this binding.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-8-jic23@kernel.org

iio: buffer: Fix demux update

When updating the buffer demux, we will skip a scan element from the
device in the case `in_ind != out_ind` and we enter the while loop.
in_ind should only be refreshed with `find_next_bit()` in the end of the
loop.

Note, to cause problems we need a situation where we are skippig over
an element (channel not enabled) that happens to not have the same size
as the next element.   Whilst this is a possible situation we haven't
actually identified any cases in mainline where it happens as most drivers
have consistent channel storage sizes with the exception of the timestamp
which is the last element and hence never skipped over.

Fixes: 5ada4ea9be16 ("staging:iio: add demux optionally to path from device to buffer")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20201112144323.28887-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Simplify iio_format_list()

iio_format_list() has two branches in a switch statement that are almost
identical. They only differ in the stride that is used to iterate through
the item list.

Consolidate this into a common code path to simplify the code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201114120000.6533-2-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Consolidate iio_format_avail_{list,range}()

The iio_format_avail_list() and iio_format_avail_range() functions are
almost identical. The only differences are that iio_format_avail_range()
expects a fixed amount of items and adds brackets "[ ]" around the output.

Refactor them into a common helper function. This improves the
maintainability of the code as it makes it easier to modify the
implementation of these functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201114120000.6533-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings:iio:samsung, exynos-adc: drop missuse of io-channel-ranges

io-channel-ranges is a property for consumers of io-channels, not
providers.  Hence it is not relevant in this binding or the examples
given.

Recent changes to dt-schema result in this being reported as an error
as a dependency is enforced between this property and io-channels.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201115192951.1073632-3-jic23@kernel.org

dt-bindings:iio:qcom-spmi-vadc drop incorrect io-channel-ranges from example

io-channel-ranges is a property for io-channel consumers. Here
it is in an example of a provider of channels so doesn't do anything
useful.

Recent additions to dt-schema check this property is only provided
alongside io-channels which is not true here and hence an error is
reported.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Jishnu Prakash <jprakash@codeaurora.org>
Link: https://lore.kernel.org/r/20201115192951.1073632-2-jic23@kernel.org

iio: potentiometer: ad5272: Correct polarity of reset

The driver should assert reset by setting the gpio high, and
then release it by setting it the gpio low. This allows the
device tree (or other hardware definition) to specify how the
gpio is configured.

For example as open drain or push-pull depending on the
connected hardware.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Link: https://lore.kernel.org/r/20201124050014.4453-1-preid@electromag.com.au
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: bmc150-accel: Add rudimentary regulator support

These Bosch accelerometers have two supplies, VDD and VDDIO.
Add some rudimentary support to obtain and enable these
regulators during probe() and disable them during remove()
or on the errorpath.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201115205745.618455-3-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: bmc150-accel: Add support for BMA222

This adds support for the BMA222 version of this sensor,
found in for example the Samsung GT-I9070 mobile phone.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201115205745.618455-2-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: bmc150-accel: Add DT bindings

These accelerometers have bindings used in the kernel and
several device trees but no proper bindings documentation.
Add it.

Also add a compatible for the BMA222 that I am right now
adding support for in the driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20201115205745.618455-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack

Use a heap allocated memory for the SPI transfer buffer. Using stack memory
can corrupt stack memory when using DMA on some systems.

This change moves the buffer from the stack of the trigger handler call to
the heap of the buffer of the state struct. The size increases takes into
account the alignment for the timestamp, which is 8 bytes.

The 'data' buffer is split into 'tx_buf' and 'rx_buf', to make a clearer
separation of which part of the buffer should be used for TX & RX.

Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201124123807.19717-1-alexandru.ardelean@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: Return error if no callback is given

Return error in case no callback is provided to
`iio_channel_get_all_cb()`. There's no point in setting up a buffer-cb
if no callback is provided.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20201121161457.957-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

ASoC: stm32: dfsdm: add stm32_adfsdm_dummy_cb() callback

Adapt STM32 DFSDM driver to a change in iio_channel_get_all_cb() API.
The callback pointer becomes a requested parameter of this API,
so add a dummy callback to be given as parameter of this function.
However, the stm32_dfsdm_get_buff_cb() API is still used instead,
to optimize DMA transfers.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201121161457.957-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: humidity: hts221: introduce vdd regulator bindings

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/9579804f52ccab74a5ca5c7a55b5072b7304bea9.1606045688.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: humidity: hts221: add vdd voltage regulator

Like all other ST sensors, hts221 devices have VDD power line.
Introduce VDD voltage regulator to control it.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/6b3347e78f4f920c48eb6a66936d3b69cb9ff53a.1606045688.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20201121185824.451477-1-vilhelm.gray@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7298: check regulator for null in ad7298_get_ref_voltage()

'st->ext_ref' & 'st->reg' are both non-zero/non-null at the same time, so
logically the code isn't broken.
But it is more correct to check that 'st->reg' is non-null, since we make
sure that the regulator is NULL (in probe) in case one isn't defined.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201127094038.91714-2-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7298: convert probe to device-managed functions

This change converts the probe of this driver to use device-managed
register functions, and a devm_add_action_or_reset() for the regulator
disable.

With this, the exit & error paths can be removed.
Another side-effect is that this should avoid some static-analyzer's check
with respect to a potential null dereference of the regulator. The null
dereference isn't likely to happen (under normal operation), so there isn't
a requirement to have this fixed/backported in other releases.

As a note: this is removing spi_set_drvdata() since there is no other
spi_get_drvdata() (or dev_get_drvdata()) call that need it.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201127094038.91714-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/ae812b48528c48555a753c081acf1c9bb6376cc6.1605631305.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator

Like all other ST sensors, st_lsm6dsx devices have VDD and VDDIO power
lines. Introduce voltage regulators to control them.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/a0427a66360bdec73c3b1fb536a46240f96b2ae7.1605631305.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings:iio:temperature: Drop generic binding file.

So far, the thermocouple-type property described in here is only
used in a single driver.  Whilst I would like it to be more generally
used that hasn't happened yet and I don't see a reason to maintain
this small file in the hope that it happens.

I pushed for this generic binding in the first place.  Hopefully
we can bring it back at somepoint.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Link: https://lore.kernel.org/r/20201031184854.745828-47-jic23@kernel.org

dt-bindings:iio:frequency:adi,adf4350: txt to yaml format conversion.

This is a large but fairly simple binding.
It may well be possible to constrain some of the properties more than
currently done, but that would involve diving into datasheets for the
supported parts.  Hence for this initial conversion just use the
information that was in the txt file.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20201031184854.745828-46-jic23@kernel.org

dt-bindings:iio:st,st-sensors: txt to yaml conversion.

This binding document covers a very large number of different sensors.
As such the existing documentation is less specific than it could
be (such as which devices have 2 interrupt pin options).
That can be improved later.

Denis, are you happy to be listed as maintainer for this one?
If not feel free to suggestion someone else.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Link: https://lore.kernel.org/r/20201031184854.745828-45-jic23@kernel.org

dt-bindings:iio:gyro:bosch,bmg180: txt to yaml format conversion.

Very simple direct conversion of existing txt file.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/20201031184854.745828-44-jic23@kernel.org

dt-bindings:iio:accel:fsl,mma8452: txt to yaml conversion.

Simple binding so mostly straight forward to convert.
Original binding was unclear on how many interrupts there are.
The device has two such lines, whilst I believe the driver currently
only uses one at a time.  The binding should allow both to be specified.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Link: https://lore.kernel.org/r/20201031184854.745828-43-jic23@kernel.org

dt-bindings:iio:accel:kionix,kxcjk1013: txt to yaml format conversion.

Very simple binding hence a straight forward conversion.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Robert Yang <decatf@gmail.com>
Link: https://lore.kernel.org/r/20201031184854.745828-42-jic23@kernel.org

dt-bindings:iio:accel:bosch,bma180: txt to yaml format conversion.

One question in here is whether we want to constrain the number of
interrupts.  Some parts definitely only have 1 such pin, and others
2 pins but I can not find information on the bma254.

Oleksandr's email address is bouncing so I've listed myself as
maintainer for this binding until someone else steps up.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-41-jic23@kernel.org

dt-bindings:iio:dac:ad5592r: txt to yaml format conversion.

This is a more complex binding. Whilst conversion is straight forward
I am unsure if the full nature of required properties has been captured.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20201031184854.745828-39-jic23@kernel.org

dt-binding:iio:adc:ti,ads124s08: txt to yaml format conversion.

Simple binding so straight forward format conversion.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20201031184854.745828-38-jic23@kernel.org

dt-bindings:iio:adc:qcom,spmi-iadc: txt to yaml format conversion.

Straight forward conversion.  Not heard from Ivan in a while so if the
email bounces, I'll change the maintainer to myself for this binding unless
anyone else comes forwards.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-37-jic23@kernel.org

dt-bindings:iio:adc:qcom,pm8018-adc: yaml conversion and rename.

Renamed to match a listed compatible rather than relying on wildcards
with all their usual problems.

Dropped the reference supply as a requirement as at least one dtsi doesn't
include it and the example never did.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201031184854.745828-36-jic23@kernel.org

dt-bindings:iio:adc:ti,palmas-gpadc: txt to yaml format conversion.

Simple conversion of the binding doc for this subnode of the palmas
PMIC.
Given age of driver and lack interaction with original authors,
I've guessed at Tony for a maintainer on this one.  Tony, if you
are happy with that great, otherwise I can default back to myself.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20201031184854.745828-35-jic23@kernel.org

dt-bindings:iio:adc:mediatek,mt2701-auxadc: rename and yaml conversion.

The current driver and indeed binding are named after a part that they
do not list in the compatible.  Hence renamed the binding to reflect
one that does.

>From the driver it looks like there is a lot more backwards compatibility
than the binding currently reflects. We could consider expressing that
more explicitly in the yaml for the compatible property. I have
added one explicit pair that was present in the upstream dtsi files.

I added Matthias alongside Zhiyong Tao because I don't think
Zhiyong Tao has reviewed recent patches.  Please let me know if this
isn't the right thing to do.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20201031184854.745828-34-jic23@kernel.org

dt-bindings:iio:adc:brcm,iproc-static-adc: txt to yaml conversion

A few questions came up in this one.
1) Why does the txt file document io-channel-ranges as a required property.
   That property is for iio-channel consumers, and this is a provider.
   I have dropped it.
2) The example had an @180a6000 for the ADC but given it uses syscon for
   all access, it doesn't have its own reg etc.  I've dropped that from
   the binding example.

Note this example was lifted directly from bcm-cygnus.dtsi so both
issues are present there as well.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Link: https://lore.kernel.org/r/20201031184854.745828-33-jic23@kernel.org

Merge tag 'iio-for-5.11a' of https://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.11 cycle

Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.

Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).

Listed by manufacturer
  - dht11 temperature(drop)
  - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
    adi,adis16480 adi,adf4350
  - ams,as3935
  - asahi-kasei,ak8974
  - atmel,sama5d2-adc
  - avago,apds9300 avago,apds9960
  - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
  - brcm,iproc-static-adc
  - capella,cm36651
  - domintech,dmard06(drop)
  - fsl,mag3110 fsl,mma8452 fsl,vf610-dac
  - hoperf,hp03
  - honeywell,hmc5843
  - kionix,kxcjk1013
  - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
    maxim,max31856 maxim,max31855k maxim,max44009
    maxim,max5481 maxim,max5821
  - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
  - mediatek,mt2701-auxadc
  - melexis,mlx90614 melexis,mlx90632
  - memsic,mmc35240(drop)
  - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
  - murata,zap2326
  - nxp,fxas21002c nxp,lpc1850-dac
  - pni,rm3100
  - qcom,pm8018-adc qcom,spmi-iadc
  - renesas,isl29501 renesas,rcar-gyroadc
  - samsung,sensorhub-rinato
  - sensiron,sgp30
  - sentech,sx9500
  - sharp,gp2ap020a00f
  - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
  - ti,adc084s021 ti,ads124s08
    ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
    ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
  - upisemi,us51882
  - vishay,vcnl4035
  - x-powers,axp209

New device support
* adi,ad5685
  - Add support for AD5338R dual output 10-bit DAC
  - Add DT-binding doc.
* mediatek,mt6360
  - New driver for this SoC ADC with bindings and using new channel label
    support in the IIO core.
* st,lsm6dsx
  - Add support for LSM6DST

Core:
* Add "label" to device channels, provided via a new core callback. Including
  DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
  no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
  any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup

Features
* semtech,sx9310
  - Add control of hardware gain, proximity thresholds, hysteresis and
    debounce.
  - Increase what information on hardware configuration can be provided
    via DT.

Cleanup and minor features
* adi,ad5685
  - Add of_match_table
* adi,ad7292
  - Drop pointless spi_set_drvdata() call
* adi,ad7298
  - Drop platform data and tidy up external reference config.
* adi,ad7303
  - Drop platform data handling as unused.
* adi,ad7768
  - Add new label attribute for channels provided from dt.
* adi,ad7887
  - devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
  - Drop pointless spi_set_drvdata() call
* adi,adis16209
  - Drop pointless spi_set_drvdata() call
* adi,adis16240
  - White space fixup
* adi,adxl372
  - use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
  - Drop pointless semicolon.
* amstaos,tsl2563
  - Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
  - Use of_device_get_match_data() instead of open coding it.
  - Constify some driver data
  - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
  - Drop platform data as mostly dead code.
  - Tidy up reference voltage logic
* atmel-sama5d2
  - Drop a pointless semicolon
  - Merge buffer and trigger init into a separate function
  - Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
  - Drop a pointless semicolon
* bosch,bmc150
  - Drop a pointless semicolon
  - Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
  - Drop a pointless semicolon
* fsl,mma8452
  - Constification
* (google),cros_ec
  - Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
  - Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
  - Drop a pointless semicolon
* invensense,icm426xx
  - Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
  - Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
  - Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
  - Stop relying on users counter form input device in ISR.
* st,lsm6dsx
  - add vdd and vddio regulator control (including binding update)
* st,stm32-adc
  - Tidy up code for dma transfers.
  - Adapt clock duty cycle for proper functioning. Note no known problems
    with existing boards.
* st,vl53l0x-i2c
  - Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
  - Put back i2c_device_id table as needed for greybus probing.

* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
  dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
  dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
  dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
  dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
  dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
  dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
  dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
  dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
  dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
  dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
  dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
  dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
  dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
  dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
  dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
  dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
  dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
  dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
  dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
  ...

dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion

This is a very small binding.  It might make sense at some stage
to just roll it into the parent mfd.  For now, converted as is.
The main advantage of this document is the identification of the
channel index values when this is used as a provider of ADC channels
to consumers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201031184854.745828-32-jic23@kernel.org

staging: dpaa2-switch: pack the firmware command structures

The structures defined in the dpsw-cmd.h header file describe exactly
the layout of commands accepted by the MC firmware. Make sure that all
these structures are packed.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201119165017.806696-4-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dpaa2-switch: make sure that the VLAN is not already configured

When in the PREPARE state of a switchdev transaction, check if the
requested VLAN is not already configured on the switch port. This keeps
us from getting into a WARNING as below.

[ 1389.683296] dpaa2_ethsw dpsw.0 eth0: VLAN 2 already configured
[ 1389.689125] ------------[ cut here ]------------
[ 1389.694084] eth0: Commit of object (id=1) failed.
[ 1389.698863] WARNING: CPU: 0 PID: 613 at net/switchdev/switchdev.c:277 switchdev_port_obj_add_now+0xcc/0x110
[ 1389.708589] Modules linked in:
[ 1389.711634] CPU: 0 PID: 613 Comm: bridge Not tainted 5.9.0-rc2-next-20200828-00112-g7172078477c5 #59
[ 1389.720753] Hardware name: NXP Layerscape LX2160ARDB (DT)
[ 1389.726139] pstate: 40000005 (nZcv daif -PAN -UAO BTYPE=--)
[ 1389.731698] pc : switchdev_port_obj_add_now+0xcc/0x110
[ 1389.736824] lr : switchdev_port_obj_add_now+0xcc/0x110

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201119165017.806696-3-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dpaa2-switch: export the 'no buffer' counter in ethtool

Export the DPSW_CNT_ING_NO_BUFFER_DISCARD counter in ethtool for each
switch interface. This is useful for debugging purposes.

Signed-off-by: Ionut-robert Aron <ionut-robert.aron@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201119165017.806696-2-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove redundant statements

The bool variable is2T is true, so the if statement is redundant.
we can directly set the variable bound to 8 and remove the if
statement.

Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1605961041-12875-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: clean up the useless code

The two bool variables singletone and carrier_sup are always false
and the following if statement can't be true, these code are useless,
so remove them.

Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1605442400-16108-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fieldbus: use kobj_to_dev() to get device

Use kobj_to_dev() instead of container_of()

Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20201117025933.668938-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mfd: hi6421-spmi-pmic: fix error return code in hi6421_spmi_pmic_probe()

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 4524ac56cdca ("staging: mfd: add a PMIC driver for HiSilicon 6421 SPMI version")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201118103724.57451-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hikey9xx: Specify HAS_IOMEM dependency for MFD_HI6421_SPMI

MFD_CORE is selected by MFD_HI6421_SPMI, and MFD_CORE depends on
HAS_IOMEM. If HAS_IOMEM is not set, this can cause a conflict in Kconfig
resolution, yielding the following error:

WARNING: unmet direct dependencies detected for MFD_CORE
  Depends on [n]: HAS_IOMEM [=n]
  Selected by [y]:
  - MFD_HI6421_SPMI [=y] && STAGING [=y] && OF [=y] && SPMI [=y]

By specifying HAS_IOMEM as a dependency for MFD_HI6421_SPMI (as
SPMI_HISI3670 already dows), this issue is resolved, and no such warning
appears when building on architectures without HAS_IOMEM.

Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20201119082903.3601758-1-davidgow@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: trivial: hikey9xx: fix be32<->u32 casting warnings

This patch fixes the following warnings reported by sparse, by adding
missing __force annotations.

drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32
drivers/staging/hikey9xx/hisi-spmi-controller.c:164:24: warning: cast to restricted __be32

drivers/staging/hikey9xx/hisi-spmi-controller.c:239:25: warning: cast from restricted __be32

Rationale for #164:
data is declared as u32, and it is read and then converted by means of
be32_to_cpu(). Said function expects a __be32 but data is u32, therefore
there's a type missmatch here.

Rationale for #239:
Is the dual of #164. This time data going to be  written so it
needs to be converted from cpu to __be32, but writel() expects u32 and the
output of cpu_to_be32 returns a __be32.

Signed-off-by: Juan Antonio Aldea-Armenteros <juant.aldea@gmail.com>
Link: https://lore.kernel.org/r/20201119122737.189675-1-juant.aldea@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/5a5a8f2489fbf61f65f0241c349737f7c9ad59ca.1605896060.git.gustavoars@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: qlge: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/673bd9f27bcc2df8c9d12be94f54001d8066d4ab.1605896060.git.gustavoars@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/863fda60074850bc976974af48fa769c64725e64.1605896059.git.gustavoars@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: core: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/cd07e3ebc11b44a3fe016341438e24cf950994a3.1605896059.git.gustavoars@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.10-rc5 into staging-testing

We want the staging/IIO fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10-rc5

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

 - Various functionality / regression fixes for Logitech devices from
   Hans de Goede

 - Fix for (recently added) GPIO support in mcp2221 driver from Lars
   Povlsen

 - Power management handling fix/quirk in i2c-hid driver for certain
   BIOSes that have strange aproach to power-cycle from Hans de Goede

 - a few device ID additions and device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver
  HID: logitech-dj: Fix an error in mse_bluetooth_descriptor
  HID: Add Logitech Dinovo Edge battery quirk
  HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge
  HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad
  HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices
  HID: mcp2221: Fix GPIO output handling
  HID: hid-sensor-hub: Fix issue with devices with no report ID
  HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
  HID: add support for Sega Saturn
  HID: cypress: Support Varmilo Keyboards' media hotkeys
  HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses
  HID: logitech-hidpp: Add PID for MX Anywhere 2
  HID: uclogic: Add ID for Trust Flex Design Tablet

Merge tag 'sched-urgent-2020-11-22' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
 "A couple of scheduler fixes:

   - Make the conditional update of the overutilized state work
     correctly by caching the relevant flags state before overwriting
     them and checking them afterwards.

   - Fix a data race in the wakeup path which caused loadavg on ARM64
     platforms to become a random number generator.

   - Fix the ordering of the iowaiter accounting operations so it can't
     be decremented before it is incremented.

   - Fix a bug in the deadline scheduler vs. priority inheritance when a
     non-deadline task A has inherited the parameters of a deadline task
     B and then blocks on a non-deadline task C.

     The second inheritance step used the static deadline parameters of
     task A, which are usually 0, instead of further propagating task
     B's parameters. The zero initialized parameters trigger a bug in
     the deadline scheduler"

* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix priority inheritance with multiple scheduling classes
  sched: Fix rq->nr_iowait ordering
  sched: Fix data-race in wakeup
  sched/fair: Fix overutilized update in enqueue_task_fair()

Merge tag 'perf-urgent-2020-11-22' of git://git./linux/kernel/git/tip/tip

Pull perf fix from Thomas Gleixner:
 "A single fix for the x86 perf sysfs interfaces which used kobject
  attributes instead of device attributes and therefore making clang's
  control flow integrity checker upset"

* tag 'perf-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: fix sysfs type mismatches

Merge tag 'locking-urgent-2020-11-22' of git://git./linux/kernel/git/tip/tip

Pull locking fix from Thomas Gleixner:
 "A single fix for lockdep which makes the recursion protection cover
  graph lock/unlock"

* tag 'locking-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Put graph lock/unlock under lock_recursion protection

Merge tag 'efi-urgent-for-v5.10-rc3' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Borislav Petkov:
 "Forwarded EFI fixes from Ard Biesheuvel:

   - fix memory leak in efivarfs driver

   - fix HYP mode issue in 32-bit ARM version of the EFI stub when built
     in Thumb2 mode

   - avoid leaking EFI pgd pages on allocation failure"

* tag 'efi-urgent-for-v5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/x86: Free efi_pgd with free_pages()
  efivarfs: fix memory leak in efivarfs_create()
  efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYP

Merge tag 'x86_urgent_for_v5.10-rc5' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - An IOMMU VT-d build fix when CONFIG_PCI_ATS=n along with a revert of
   same because the proper one is going through the IOMMU tree (Thomas
   Gleixner)

 - An Intel microcode loader fix to save the correct microcode patch to
   apply during resume (Chen Yu)

 - A fix to not access user memory of other processes when dumping
   opcode bytes (Thomas Gleixner)

* tag 'x86_urgent_for_v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "iommu/vt-d: Take CONFIG_PCI_ATS into account"
  x86/dumpstack: Do not try to access user space code of other tasks
  x86/microcode/intel: Check patch signature before saving microcode for early loading
  iommu/vt-d: Take CONFIG_PCI_ATS into account

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: mm (madvise, pagemap,
  readahead, memcg, userfaultfd), kbuild, and vfs"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix madvise WILLNEED performance problem
  libfs: fix error cast of negative value in simple_attr_write()
  mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
  mm: memcg/slab: fix root memcg vmstats
  mm: fix readahead_page_batch for retry entries
  mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
  compiler-clang: remove version check for BPF Tracing
  mm/madvise: fix memory leak from process_madvise

Merge tag 'staging-5.10-rc5' of git://git./linux/kernel/git/gregkh/staging

Pull staging and IIO fixes from Greg KH:
 "Here are some small Staging and IIO driver fixes for 5.10-rc5. They
  include:

   - IIO fixes for reported regressions and problems

   - new device ids for IIO drivers

   - new device id for rtl8723bs driver

   - staging ralink driver Kconfig dependency fix

   - staging mt7621-pci bus resource fix

  All of these have been in linux-next all week with no reported issues"

* tag 'staging-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-mode
  iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enum
  docs: ABI: testing: iio: stm32: remove re-introduced unsupported ABI
  iio: light: fix kconfig dependency bug for VCNL4035
  iio/adc: ingenic: Fix AUX/VBAT readings when touchscreen is used
  iio/adc: ingenic: Fix battery VREF for JZ4770 SoC
  staging: rtl8723bs: Add 024c:0627 to the list of SDIO device-ids
  staging: ralink-gdma: fix kconfig dependency bug for DMA_RALINK
  staging: mt7621-pci: avoid to request pci bus resources
  iio: imu: st_lsm6dsx: set 10ms as min shub slave timeout
  counter/ti-eqep: Fix regmap max_register
  iio: adc: stm32-adc: fix a regression when using dma and irq
  iio: adc: mediatek: fix unset field
  iio: cros_ec: Use default frequencies when EC returns invalid information