staging:iio:cdc:ad7150: Add of_match_table

Rather than using the fallback path in the i2c subsystem and hoping
for no clashes across vendors, lets put in an explicit table for
matching.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon>
Link: https://lore.kernel.org/r/20210314181511.531414-21-jic23@kernel.org

staging:iio:cdc:ad7150: Really basic regulator support.

Given DT docs will include regulators, lets just turn them on and
off with driver probe() and remove().

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-20-jic23@kernel.org

staging:iio:cdc:ad7150: Add scale and offset to info_mask_shared_by_type

The datasheet provides these two values on the assumption they are applied
to unshift raw value.  Hence shift both the offset and scale by 4
to compensate.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-19-jic23@kernel.org

staging:iio:cdc:ad7150: Shift the _raw readings by 4 bits.

Every other register related to raw value on the datasheet is
described as correpsonding to the 12MSB of the actual
data registers + the bottom 4 bits are 0.  So lets treat this
as what it actually is, which is a 12 bit value.
Note that we will have to be a little careful to compensate for
the offset and scale values.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-18-jic23@kernel.org

staging:iio:cdc:ad7150: Drop unnecessary block comments.

These have a habit of not getting updated with driver reorganizations
and don't add much info so drop them.

Also fix a minor comment syntax issue.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-17-jic23@kernel.org

staging:iio:cdc:ad7150: Tidy up local variable positioning.

Where there is no other basis on which to order declarations
let us prefer reverse xmas tree.  Also reduce scope where
sensible.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-16-jic23@kernel.org

staging:iio:cdc:ad7150: Reorganize headers.

Whilst not important, it's nice to have the general headers in
alphabetical order.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-15-jic23@kernel.org

staging:iio:cdc:ad7150: More consistent register and field naming

Add _REG postfix to register addresses to avoid confusion with
fields.  Also add additional field defines and use throughout the
driver in place of magic numbers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-14-jic23@kernel.org

staging:iio:cdc:ad7150: Rework interrupt handling.

Note this doesn't support everything the chip can do as we ignore
window mode for now (in window / out of window).

* Given the chip doesn't have any way of disabling the threshold
  pins, use disable_irq() etc to mask them except when we actually
  want them enabled (previously events were always enabled).
  Note there are race conditions, but using the current state from
  the status register and disabling interrupts across changes in
  type of event should mean those races result in interrupts,
  but no events to userspace.

* Correctly reflect that there is one threshold line per channel.

* Only take notice of rising edge. If anyone wants the other edge
  then they should set the other threshold (they are available for
  rising and falling directions).  This isn't perfect but it makes
  it a lot simpler.

* If insufficient interrupts are specified in firnware, don't support
  events.

* Adaptive events use the same pos/neg values of thrMD as non adaptive
  ones.

Tested against qemu based emulation.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210314181511.531414-13-jic23@kernel.org

staging:iio:cdc:ad7150: Change timeout units to seconds and use core support

Now we have core support for timeouts related to adaptive events, let us
use it.  Note the units of that attribute are seconds, so we also need
to scale the cycles value by the period of each sample.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-12-jic23@kernel.org

iio:event: Add timeout event info type

For adaptive threshold events, the current value is compared with a
(typically) low pass filtered version of the same signal that slowly
tracks large scale changes.  However, sometimes a step change can
result in a large lag before the low pass filtered version begins
to track the signal again.  Timeouts can be used to made an
instantaneous 'correction'.  Documentation of this attribute
is added in a later patch.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-11-jic23@kernel.org

staging:iio:cdc:ad7150: Add sampling_frequency support

Device uses a fixed sampling frequency. Let us expose it to userspace.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-10-jic23@kernel.org

staging:iio:cdc:ad7150: Drop noisy print in probe

Also
* drop i2c_set_client_data() as now unused.
* white space cleanups

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-9-jic23@kernel.org

staging:iio:cdc:ad7150: Simplify event handling by only using rising direction.

The event line is active high and not maskable within the device.
It indicates current state directly.

The device supports separate rising and falling thresholds so rather
than trying to using each bound to detect in both directions just use
IRQF_TRIGGER_RISING.  If a user wants to detect the value falling
back below the threshold, then set the falling threshold appropriately.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-8-jic23@kernel.org

staging:iio:cdc:ad7150: Handle variation in chan_spec across device and irq present or not

The driver supports devices with different numbers of channels and
also can function without provision of an IRQ (with reduced features),
so this patch handles this cleanly by having multiple chan_spec
arrays and iio_info structures to pick between depending on what we
have.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-7-jic23@kernel.org

staging:iio:cdc:ad7150: Drop platform data support

There are no mainline board files using this driver so lets drop
the platform_data support in favour of devicetree and similar.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-6-jic23@kernel.org

staging:iio:cdc:ad7150: Timeout register covers both directions so both need updating

The timeout is treated as one single value, but the datasheet describes
it as two 4 bit values, one for each direction of event.
As such change the driver to support the separate directions.
Also add limit checking to ensure it fits within the 4 bits.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-5-jic23@kernel.org

staging:iio:cdc:ad7150: Refactor event parameter update

Original code was ordered in a fairly unituitive fashion with
the non adaptive threshold handling returning from the switch
statement, whilst the adapative path did the actual writes outside
the switch.   Make it more readable by bringing everything within
the switch statement cases and reducing scope of local variables
as appropriate.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-4-jic23@kernel.org

staging:iio:cdc:ad7150: Remove magnitude adaptive events

The devices support window detection, but that corresponds to
being outside of a range defined by a lower an uppper bound rather
than being related to magnitude as such.   Hence drop this interface
in the interests of making the driver ABI compliant.

We may bring back support for the window mode at somepoint in the future
but it will be in an ABI compliant fashion.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-3-jic23@kernel.org

staging:iio:cdc:ad7150: use swapped reads/writes for i2c rather than open coding

Reduces boilerplate and chances of getting the error handling wrong.
No functional change.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon>
Link: https://lore.kernel.org/r/20210314181511.531414-2-jic23@kernel.org

iio: inv_mpu6050: Make interrupt optional

The inv_mpu6050 driver requires an interrupt for buffered capture. But non
buffered reading for measurements works just fine without an interrupt
connected.

Make the interrupt optional to support this case.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20210325131046.13383-2-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: inv_mpu6050: Remove superfluous indio_dev->modes assignment

The inv_mpu6050 driver manually assigns the indio_dev->modes property. But
this is not necessary since it will be setup in iio_trigger_buffer_setup().

Remove the manual assignment.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20210325131046.13383-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: return 0 for buffer getfd ioctl handler

As Lars pointed out, we could either return the FD vs memcpy-ing it to the
userspace data object.

However, this comment exposed a bug. We should return 0 or negative from
these ioctl() handlers. Because an ioctl() handler can also return
IIO_IOCTL_UNHANDLED (which is positive 1), which means that the ioctl()
handler doesn't support this ioctl number. Positive 1 could also be a valid
FD number in some corner cases.

The reason we did this is to be able to differentiate between an error
code and an unsupported ioctl number; for unsupported ioctl numbers, the
main loop should keep going.

Maybe we should change this to a higher negative number, to avoid such
cases when/if we add more ioctl() handlers.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Fixes: f73f7f4da5818 ("iio: buffer: add ioctl() to support opening extra buffers for IIO device")
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210322084135.17536-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Fix iio_read_channel_processed_scale()

The code was checking if (ret) from the processed
channel readout, not smart, we need to check if (ret < 0)
as this will likely be something like IIO_VAL_INT.

Fixes: 635ef601b238 ("iio: Provide iio_read_channel_processed_scale() API")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210323122705.1326362-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7923: register device with devm_iio_device_register

Registers the device using the devm variant.
This is the final step of converting the ad7923 to only use devm routines,
meaning that the ad7923_remove() function is no longer needed to release
resources on device detach.

Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/b0146465d52f4e259f5f95c83c71e72f065093da.1616966903.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7923: use device-managed function for triggered buffer

Converts the iio_triggered_buffer_setup() call to its device-managed
counterpart.
With this, the error handling routine in the ad7923_probe() function
becomes unnecessary as well as the iio_triggered_buffer_cleanup() call.

Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/fe46a45caaa788f333d78367968272de728f4a6e.1616966903.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7923: use devm_add_action_or_reset for regulator disable

Adds a device-managed action to handle disabling the driver's regulator on
device detach.
This slightly simplifies deinitialization and enables further conversion of
the driver to device-managed routines without breaking the init order.

Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/49a7c0436ca1186313dbccf3d810d0cf38cb5b37.1616966903.git.lucas.p.stankus@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: Rudimentary typo fix

s/concurent/concurrent/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210323012215.451075-1-unixbhaskar@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu6050: Use as standalone trigger

It may happen that the MPU6050 is the only hardware
trigger available on your system such as this:

> lsiio
Device 003: hscdtd008a
Device 001: mpu6050
Device 002: gp2ap002
Device 000: ab8500-gpadc
Trigger 000: mpu6050-dev1

And when you want to use it to read periodically from
your magnetometer like this:

> iio_generic_buffer -a -c 100 -n hscdtd008a -t mpu6050-dev1

Then the following happens:

[  209.951334] Internal error: Oops: 5 [#1] SMP ARM
(...)
[  209.981969] Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
[  209.988925] PC is at inv_scan_query_mpu6050+0x8/0xb8
[  209.993914] LR is at inv_mpu6050_set_enable+0x40/0x194

This is because since we are not using any channels from the
same device, the indio_dev->active_scan_mask is NULL.

Just checking for that and bailing out is however not enough:
we have to enable some kind of FIFO for the readout to work.
So enable the temperature as a dummy FIFO and all works
fine.

Not suitable for backporting to stable.  It is an odd corner case
and does not represent a regression.

Fixes: 09a642b78523 ("Invensense MPU6050 Device Driver.")
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20210322132408.1003443-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:accel:adis16201: Fix wrong axis assignment that prevents loading

Whilst running some basic tests as part of writing up the dt-bindings for
this driver (to follow), it became clear it doesn't actually load
currently.

iio iio:device1: tried to double register : in_incli_x_index
adis16201 spi0.0: Failed to create buffer sysfs interfaces
adis16201: probe of spi0.0 failed with error -16

Looks like a cut and paste / update bug.  Fixes tag obviously not accurate
but we don't want to bother carry thing back to before the driver moved
out of staging.

Fixes: 591298e54cea ("Staging: iio: accel: adis16201: Move adis16201 driver out of staging")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <Stable@vger.kernel.org>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210321182956.844652-1-jic23@kernel.org

iio: dac: Convert powerdown read callbacks to sysfs_emit()

Update DAC drivers powerdown attribute show callback to use the new
sysfs_emit() function.

sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in sanity checks.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210320071405.9347-5-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: __iio_format_value(): Convert to sysfs_emit_at()

sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in sanity checks.

Convert __iio_format_value() and related functions to use this new
interface.

This conversion involves changing the signature of __iio_format_value() so
that it similar to sysfs_emit_at() and takes the buffers start address and
an offset where to write within the buffer.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210320071405.9347-4-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: iio_enum_available_read(): Convert to sysfs_emit_at()

sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in sanity checks.

Convert the iio_enum_available_read() function to use sysfs_emit_at()
instead of scnprintf().

The conversion is straight forward, the only difference is that
sysfs_emit_at() takes the buffers start address and an offset as parameters
and already knows about the buffer's size limit.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210320071405.9347-3-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: Use sysfs_emit() (trivial bits)

sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it
knows about the sysfs buffer specifics and has some built-in sanity checks.

This patch converts the places in the iio core that follow the pattern of

   return s*printf(...)

to

   return sysfs_emit(...)

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210320071405.9347-2-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:imu:mpu6050: Modify matricies to matrices

The plural of "matrix" is "matrices".

Signed-off-by: Guoqing Chi <chiguoqing@yulong.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20210322013024.1849-1-chi962464zy@163.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Merge tag 'iio-for-5.13a' of https://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st set of IIO/counter device support, features and cleanup in the 5.13 cycle

Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.

Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem.  Merge required updating to reflect
some changes in IIO.

Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.

IIO New Device Support
* adi,ad5686
  - Add info to support AD5673R and AD5677R
* bosch,bmi088
  - New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
  - New driver for this proximity sensor that exposes a 'front'
    sensor. Very simple switch like device, but driver allows it
    to share interface with more sophisticated proximity sensors.
* iio_scmi
  - New driver to support ARM SCMI protocol to expose underlying
    accelerometers and gyroscopes via this firmware interface.
* st,st_magn
  - Add ID for IISMDC magnetometer.
* ti,ads131e0
  - New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs

Counter New Device Support
* IRQ or GPIO based counter
  - New driver for a conceptually simple counter that uses interrupts
    to perform the count.

Features
* core
  - Dual buffer supprt including:
     Various helpers to centralize handling of bufferer related elements.
     Document existing and new IOCTLs
     Register the IIO chrdev only if it can actually be used for anything.
     Rework attribute group creation in the core (lots of patches)
     Merge buffer/ and scan_elements/ entries into one list + maintain
     backwards compatible set.
     Introduce the internal logic and IOCTL to allow multiple buffers
     + access to an anon FD per buffer to actually read from it.
     Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
     Update ABI docs.
     A few follow up fixes, unsuprising as this was a huge bit of rework.
  - Move common case setting of trig->parent to the core.
  - Provide an iio_read_channel_processed_scale() to avoid loss of
    precision from iio_read_channel_processed() then applying integer
    scale. Use it in ntc_thermistor driver in hwmon.
  - Allow drivers to specify labels from elsewhere than DT. Use it for
    bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
  - Document label usage for proximity and accelerometer sensors.
  - Some local variable renames for consistency
tools
  - Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
  - Add trigger support for devices that don't support notification method.
* adi,ad7124
  - Allow more than 8 channels.  This is a complex little device, but is
    capable of supporting up to 16 channels if the share certain
    configuration settings.
* hrtimer-trigger
  - Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
  - Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
  - Enable timetamps when not using DMA.
* vishay,vcnl3020
  - Sampling frequency control.

Cleanup and minor fixes:
* treewide
  - Use some getter and setter functions instead of opencoding.
  - Set of fixes for pointless casts in various drivers.
  - Avoid wrong kernel-doc marking on comment blocks.
  - Fix various other minor kernel-doc issues shown by W=1
* core
  - Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
  - Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
  - Add unit tests for iio_format_value()
* docs
  - Fix formatting/typos in iio_configfs.rst and buffers.rst
  - Add documentation of index in buffers.rst
  - Fix scan element description
  - Avoid some issues with HTML generation from ABI docs by moving
    duplicated defintions to more generic files.
  - Drop reference to long dead mailing list.
* 104-quad
  - Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
  - Fix wrong bit of docs.
* adi,ad5791
  - Typos
* adi,ad9834
   - Switch to device managed functions in probe.
* adi,adis*
  - Add and use helpers for locking to reduced duplication.
* adi,adis16480
  - Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
  - Calculate the IMU scaled internal sampling rate and runtime depending
    on sysfs based configuration rather than getting from DT. Drop now
    unnecessary property from DT bindings doc.
* cros_ec
   - Fix result of a series of recent changes that means extended buffer
     attributes turn up in the wrong place. Too complex to revert the
     various patches unfortunately so this is a bit messy.
* fsl,mma3452
  - Indentation cleanup.
* hid-sensors
  - Size of storage needs to increase for some parts when using quaternions.
  - Move the get sensistivity attribute to hid-sensors-common to reduce
    duplication.  Enable it for more device types.
  - Correctly handle relative sensitivity if reported that way including
    documenting the new ABI.
* maxim,max517
  - Use device managed functions in probe.
* mediatek,mt6360-adc
  - Use asm/unaligned.h instead of directly including
    unaligned/be_byteshift.h
* novuton,npcm-adc
  - Local lock instead of missusing mlock.
* semtech,sx9500
  - Typos
* st,sensor
  - typo fix
* st,spear-adc
  - Local lock instead of missusing mlock.
* st,stm32-adc
  - Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
  - Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
  - Local lock instead of missusing mlock.
* ti,tmp007
  - Switch to device managed functions in probe.

Other
* MAINTAINERS
  - Move Peter Meerwald-Stadler to Credits at his request

* tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (119 commits)
  iio: acpi_als: Add trigger support
  iio: acpi_als: Add local variable dev in probe
  iio: acpi_als: Add timestamp channel
  iio: adc: ad7292: Modify the bool initialization assignment
  iio: cros: unify hw fifo attributes without API changes
  iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
  iio: event_monitor: Enable events before monitoring
  dt-bindings: iio: adc: Add compatible for Mediatek MT8195
  iio:magnetometer: Add Support for ST IIS2MDC
  dt-bindings: iio: st,st-sensors add IIS2MDC.
  staging: iio: ad9832: kernel-doc fixes
  iio:dac:max517.c: Use devm_iio_device_register()
  iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
  iio: buffer: kfifo_buf: kernel-doc, typo in function name.
  iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
  iio: adc: adi-axi-adc: Drop false marking for kernel-doc
  iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
  iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
  iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
  iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
  ...

Merge remote-tracking branch 'local/ib-iio-scmi-5.12-rc2-take3' into togreg

Updated to use devm_iio_kfifo_buffer_setup() in place of now
removed devm_iio_kfifo_allocate()

Take3 branch because first 2 versions including wrong version of
patch.

iio: acpi_als: Add trigger support

As some firmware does not notify on illuminance changes, add a
trigger to be able to query light via software (sysfs-trigger or
hrtrigger).
Add a hardware trigger set as the default trigger to maintain backward
compatibility.

Check iio_info reports the sensor as buffer capable:
  iio:device0: acpi-als (buffer capable)

To test, check we can get data on demand on an Intel based chromebook:

  IIO_DEV="iio:device0"
  echo 1 > iio_sysfs_trigger/add_trigger
  cat trigger2/name > ${IIO_DEV}/trigger/current_trigger
  for i in ${IIO_DEV}/scan_elements/*_en ${IIO_DEV}/buffer/enable ; do
    echo 1 > $i
  done
  od -x /dev/${IIO_DEV} &
  echo 1 > trigger2/trigger_now

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210317074012.2336454-4-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: acpi_als: Add local variable dev in probe

Use dev = &device->dev in probe routine for clarity.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210317074012.2336454-3-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: acpi_als: Add timestamp channel

Add timestamp channel in list of channel, to allow retrieving timestamps
when events are produced.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210317074012.2336454-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7292: Modify the bool initialization assignment

A bool initializer is best assigned to false rather than 0.

Signed-off-by: Guoqing Chi <chiguoqing@yulong.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20210319062706.5135-1-chi962464zy@163.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros: unify hw fifo attributes without API changes

Commit 2e2366c2d141 ("iio: cros_ec: unify hw fifo attributes into the core file")
should be reverted as it set buffer extended attributes at
the wrong place. However, to revert it will requires to revert more
commits:
commit 165aea80e2e2 ("iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()")
commit 21232b4456ba ("iio: buffer: remove iio_buffer_set_attrs() helper")).
and we would still have conflict with more recent development.
commit ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers")

Instead, this commit reverts the first 2 commits without re-adding
iio_buffer_set_attrs() and set the buffer extended attributes at the
right place:

1. Instead of adding has_fw_fifo, deduct it from the configuration:
- EC must support FIFO (EC_FEATURE_MOTION_SENSE_FIFO) set.
- sensors send data a regular interval (accelerometer, gyro,
  magnetomer, barometer, light sensor).
- "Legacy accelerometer" is only present on EC without FIFO, so we don't
need to set buffer attributes.

2. devm_iio_triggered_buffer_setup_ext() does not need to be called when
EC does not support FIFO, as there is no FIFO to manage.

3. Use devm_iio_triggered_buffer_setup_ext() when EC has a FIFO to
specify the buffer extended attributes.

Fixes: 2e2366c2d141 ("iio: cros_ec: unify hw fifo attributes into the core file")
Fixes: 165aea80e2e2 ("iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210318184857.2679181-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant

This is similar to the {devm_}iio_triggered_buffer_setup_ext variants added
via commit 5164c7889857 ("iio: triggered-buffer: add
{devm_}iio_triggered_buffer_setup_ext variants").

These can be used to pass extra buffer attributes to the buffer object.
This is a bit of temporary mechanism (hopefully) so that drivers that want
to allocate a kfifo buffer with extra buffer attributes, don't need to
include 'buffer_impl.h' directly. This can also become an API function (in
it's own right, unfortunately), but it may be a little less bad vs drivers
having to include 'buffer_impl.h'.

So, far the drivers that want to pass buffer attributes, all have to do
with some HW FIFO attributes, so there may be a chance of unifying them
into IIO core somehow (as some standard API). But, until that happens, we
just need to let them register their HW FIFO attributes directly (without
having to let them include 'buffer_impl.h' directly).

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210311091042.22417-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: event_monitor: Enable events before monitoring

After some painful sessions with a driver that register an
enable/disable sysfs knob (gp2ap002) and manually going
in and enabling the event before monitoring it:

  cd /sys/bus/iio/devices/iio\:device2/events
  # ls
  in_proximity_thresh_either_en
  # echo 1 > in_proximity_thresh_either_en

I realized that it's better if the iio_event_monitor is
smart enough to enable all events by itself and disable them
after use, if passed the -a flag familiar from the
iio_generic_buffer tool.

Auto-enabling events depend on the hardware being able
to handle all events at the same time which isn't
necessarily the case, so a command line option is required
for this.

Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210319135301.542911-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: Add compatible for Mediatek MT8195

This commit adds dt-binding documentation of auxadc for Mediatek MT8195 SoC
Platform.

Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
Link: https://lore.kernel.org/r/20210319023427.16711-7-seiya.wang@mediatek.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:magnetometer: Add Support for ST IIS2MDC

Add support for ST magnetometer IIS2MDC,
an I2C/SPI interface 3-axis magnetometer.
The patch was tested on the instrument with IIS2MDC via I2C interface.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://lore.kernel.org/r/20210317063902.19300-3-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: st,st-sensors add IIS2MDC.

Add support for ST magnetometer IIS2MDC,
an I2C/SPI interface 3-axis magnetometer sensor.
The patch was tested on the instrument with IIS2MDC via I2C interface.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://lore.kernel.org/r/20210317063902.19300-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad9832: kernel-doc fixes

Fixes a W=1 warning.
-Added ``:`` to lock parameter in 'ad9832_state' description.
-It's a reference comment so removed /**

Signed-off-by: Mugilraj Dhavachelvan <dmugil2000@gmail.com>
Link: https://lore.kernel.org/r/20210315133711.26860-1-dmugil2000@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:dac:max517.c: Use devm_iio_device_register()

Use devm_iio_device_register() to avoid remove function and
drop explicit call to iio_device_unregister().

Signed-off-by: Mugilraj Dhavachelvan <dmugil2000@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210314175709.34301-1-dmugil2000@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:cros_ec_sensors: Fix a wrong function name in kernel doc.

cros_ec_sensors_read_data_unsafe() had wrong function name in kernel-doc
This shows up with W=1 builds.

No fixes tag because I don't want to waste time on this being
backported.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210313145341.116088-1-jic23@kernel.org

iio: buffer: kfifo_buf: kernel-doc, typo in function name.

Should have been _kfifo_ and was _fifo_

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210314164655.408461-9-jic23@kernel.org

iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.

All extremely obvious so nothing to add to patch title.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210314164655.408461-8-jic23@kernel.org

iio: adc: adi-axi-adc: Drop false marking for kernel-doc

This comment block isn't in kernel-doc format so drop the /** marking.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210314164655.408461-7-jic23@kernel.org

iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name

Fixes a W=1 warning.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210314164655.408461-6-jic23@kernel.org

iio: dac: ad5504: fix wrong part number in kernel-doc structure name.

Probably a bit of cut and paste where someone forgot to change the
part number.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210314164655.408461-5-jic23@kernel.org

iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name

Nothing useful to add beyond this causing a warning with W=1

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210314164655.408461-4-jic23@kernel.org

iio: adc: ti-adc084s021: kernel-doc fixes, missing function names

The documentation in this driver was nearly kernel-doc and was marked
as such. Unfortunately the format was wrong and function names were
missing. This patch puts them in with minor edits to keep the resulting
line short.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Mårten Lindahl <martenli@axis.com>
Link: https://lore.kernel.org/r/20210314164655.408461-3-jic23@kernel.org

iio: pressure: zpa2326: kernel-doc fixes

Two comment blocks had wrong naming for function/structures that they
referred to.  Results in warnings when doing a W=1 build.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20210314164655.408461-2-jic23@kernel.org

counter: add IRQ or GPIO based counter

Add simple IRQ or GPIO base counter. This device is used to measure
rotation speed of some agricultural devices, so no high frequency on the
counter pin is expected.

The maximal measurement frequency depends on the CPU and system load. On
the idle iMX6S I was able to measure up to 20kHz without count drops.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20210301080401.22190-3-o.rempel@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: counter: add interrupt-counter binding

Add binding for the interrupt counter node

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210301080401.22190-2-o.rempel@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: ad9834: convert to device-managed functions in probe

This change converts the driver to use device-managed functions in the
probe function. For the clock and regulator disable, some
devm_add_action_or_reset() calls are required, and then
devm_iio_device_register() function can be used register the IIO device.

The final aim here would be for IIO to export only the device-managed
functions of it's API. That's a long way to go and this a small step in
that direction.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210310095131.47476-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: tmp007: use device-managed functions in probe

This change converts the driver to use device-managed functions in the
probe function. The power-down call is handled now via a
devm_add_action_or_reset() hook, and then devm_iio_device_register() can be
used to register the IIO device.

The final aim here would be for IIO to export only the device-managed
functions of it's API. That's a long way to go and this a small step in
that direction.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210310093800.45822-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: buffer: fix use-after-free for attached_buffers array

Thanks to Lars for finding this.
The free of the 'attached_buffers' array should be done as late as
possible. This change moves it to iio_buffers_put(), which looks like
the best place for it, since it takes place right before the IIO device
data is free'd.
The free of this array will be handled by calling iio_device_free().
The iio_buffers_put() function is renamed to iio_device_detach_buffers()
since the role of this function changes a bit.

It looks like this issue was ocurring on the error path of
iio_buffers_alloc_sysfs_and_mask() and in
iio_buffers_free_sysfs_and_mask()

Added a comment in the doc-header of iio_device_attach_buffer() to
mention how this will be free'd in case anyone is reading the code
and becoming confused about it.

Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210307185444.32924-1-ardeleanalex@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

hwmon: (ntc_thermistor): try reading processed

Before trying the custom method of reading the sensor
as raw and then converting, we want to use
iio_read_channel_processed_scale() which first tries to
see if the ADC can provide a processed value directly,
else reads raw and applies scaling inside of IIO
using the scale attributes of the ADC. We need to
multiply the scaled value with 1000 to get to
microvolts from millivolts which is what processed
IIO channels returns.

Keep the code that assumes 12bit ADC around as a
fallback.

This gives correct readings on the AB8500 thermistor
inputs used in the Ux500 HREFP520 platform for reading
battery and board temperature.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Link: https://lore.kernel.org/linux-iio/20201224011607.1059534-1-linus.walleij@linaro.org/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Chris Lesiak <chris.lesiak@licor.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210308100219.2732156-2-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Provide iio_read_channel_processed_scale() API

Since the old iio_read_channel_processed() would
lose precision if we fall back to reading raw and
scaling, we introduce a new API that will pass in
a scale factor when reading a processed channel:
iio_read_channel_processed_scale().

Refactor iio_read_channel_processed() as a special
case with scale factor 1.

Cc: Peter Rosin <peda@axentia.se>
Cc: Chris Lesiak <chris.lesiak@licor.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Link: https://lore.kernel.org/linux-iio/20201224011607.1059534-1-linus.walleij@linaro.org/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210308100219.2732156-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: xilinx-xadc: Remove code to set trigger parent

iio_trigger_set_drvdata() sets the trigger device parent to first
argument of viio_trigger_alloc(), no need to do it again in the driver
code.

In xadc_alloc_trigger, given dev is indio_dev->dev.parent, and we call
devm_iio_trigger_alloc wit dev as argument,  we do not have to set
data->trig->dev.parent to indio_dev->dev.parent anymore.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-9-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: as3935: Remove code to set trigger parent

iio_trigger_set_drvdata() sets the trigger device parent to first
argument of viio_trigger_alloc(), no need to do it again in the driver
code.

Given we call devm_iio_trigger_alloc() and devm_iio_device_alloc() with
dev as parent, we do not have to set data->trig->dev.parent to
indio_dev->dev.parent anymore.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-8-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: chemical: atlas: Remove code to set trigger parent

iio_trigger_set_drvdata() sets the trigger device parent to first
argument of viio_trigger_alloc(), no need to do it again in the driver
code.

Given we call devm_iio_trigger_alloc() and devm_iio_device_alloc() with
&client->dev as parent, we do not have to set data->trig->dev.parent to
indio_dev->dev.parent anymore.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-7-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: lmp91000: Remove code to set trigger parent

iio_trigger_set_drvdata() sets the trigger device parent to first
argument of viio_trigger_alloc(), no need to do it again in the driver
code.

Given data->dev is dev, and we call devm_iio_trigger_alloc with
dev instead of data->dev, we do not have to set data->trig->dev.parent to
dev anymore.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-6-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: gp2ap020a00f: Remove code to set trigger parent

iio_trigger_set_drvdata() sets the trigger device parent to first
argument of viio_trigger_alloc(), no need to do it again in the driver
code.

Given data->client is client, and we call devm_iio_trigger_alloc() with
&client->dev, we do not have to set data->trig->dev.parent to
&data->client->dev anymore.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-5-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adis_trigger: Remove code to set trigger parent

iio_trigger_set_drvdata() sets the trigger device parent to first
argument of viio_trigger_alloc(), no need to do it again in the driver
code.
Remove adis_trigger_setup() to match other drivers where setting the
trigger is usually done in the probe() routine.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-4-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: fix devm_iio_trigger_alloc with parent.cocci

Use cocci semantic patch:
@@
expression trigger, P;
@@
   trigger = devm_iio_trigger_alloc(P, ...);
   ...
-  trigger->dev.parent = P;

To remove trigger->dev.parent, since it is set by default.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-3-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: set default trig->dev.parent

When allocated with [devm_]iio_trigger_alloc(), set trig device parent to
the device the trigger is allocated for by default.

It can always be reassigned in the probe routine.

Change iio_trigger_alloc() API to add the device pointer to be coherent
with devm_iio_trigger_alloc, using similar interface to
iio_device_alloc().

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210309193620.2176163-2-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7124: allow more than 8 channels

Currently AD7124-8 driver cannot use more than 8 IIO channels
because it was assigning the channel configurations bijectively
to channels specified in the device-tree. This is not possible
to do when using more than 8 channels as AD7124-8 has only 8
configuration registers.

To allow the user to use all channels at once the driver
will keep in memory configurations for all channels but
will program only 8 of them at a time on the device.
If multiple channels have the same configuration, only
one configuration register will be used. If there
are more configurations than available registers only
the last 8 used configurations will be allowed to exist
on the device in a LRU fashion.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210311091154.47785-2-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: gp2ap002: Drop unneeded explicit casting

The unnecessary explicit casting is being used. Drop it for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210312134903.4296-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: Drop unneeded explicit castings

In a few places the unnecessary explicit castings are being used.
Drop them for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210312134743.4055-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: fxos8700: Drop unneeded explicit castings

In a few places the unnecessary explicit castings are being used.
Drop them for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210312134538.3759-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: chemical: bmp680: Drop unneeded explicit castings

In few places the unnecessary explicit castings are being used.
Drop them for good.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210312134349.3472-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: Add a ChromeOS EC MKBP proximity driver

Add support for a ChromeOS EC proximity driver that exposes a "front"
proximity sensor via the IIO subsystem. The EC decides when front
proximity is near and sets an MKBP switch 'EC_MKBP_FRONT_PROXIMITY' to
notify the kernel of proximity. Similarly, when proximity detects
something far away it sets the switch bit to 0. For now this driver
exposes a single sensor, but it could be expanded in the future via more
MKBP bits if desired.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20210211024601.1963379-4-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: Add cros ec proximity yaml doc

Some cros ECs support a front proximity MKBP event via
'EC_MKBP_FRONT_PROXIMITY'. Add a DT binding to document this feature via
a node that is a child of the main cros_ec device node. Devices that
have this ability will describe this in firmware.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: <devicetree@vger.kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210211024601.1963379-3-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

platform/chrome: cros_ec: Add SW_FRONT_PROXIMITY MKBP define

Some cros ECs support a front proximity MKBP event via
'EC_MKBP_FRONT_PROXIMITY'. Add this define so it can be used in a
future patch.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210211024601.1963379-2-swboyd@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Remove kernel-doc keyword in file header comment

Remove kernel-doc keyword from function header comment.
It fixes issues spotted by scripts/kernel-doc like:
drivers/iio/<driver>.c:3: info: Scanning doc for function <component name>
drivers/iio/<driver>.c:X: warning: expecting prototype for <component name>.
  Prototype was for <function>() instead

To reproduce the errors:
scripts/kernel-doc -v -none $(find drivers/iio/ -name \*.c \
-exec head -2 {} \+ | grep -B2 -e '\*\*' | grep '==' | cut -d ' ' -f 2)

After, confirm these errors are gone with:
scripts/kernel-doc -v -none $(git show --name-only  | grep -e "^driver")

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20210309234314.2208256-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: kfifo: mask flags without zero-check in devm_iio_kfifo_buffer_setup()

As pointed by Lars, this doesn't require a zero-check. Also, while looking
at this a little closer at it (again), the masking can be done later, as
there is a zero-check for 'mode_flags' anyway, which returns -EINVAL. And
we only need the 'mode_flags' later in the logic.

This change is more of a tweak.

Fixes: e36db6a06937 ("iio: kfifo: add devm_iio_kfifo_buffer_setup() helper")
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210306162834.7339-1-ardeleanalex@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: hrtimer: Allow sub Hz granularity

Allow setting frequency below 1Hz or sub 1Hz precision.
Useful for slow sensors like ALS.

Test frequency is set properly:
modprobe iio-trig-hrtimer && \
mkdir /sys/kernel/config/iio/triggers/hrtimer/t1 && \
cd /sys/bus/iio/devices/triggerX ;
for i in 1 .1 .01 .001 ; do
  echo $i > sampling_frequency
  cat sampling_frequency
done

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210226014733.2108544-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: iio: remove mention of defunct list

The ADI device-drivers-devel list no longer exists.

Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/69b3e45e7666a1dd74a83df0b84ef8a63bf090ea.1614082343.git.baruch@tkos.co.il
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: mma8452: fix indentation

Improve readability by fixing indentation.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20210301080029.1974797-1-sean@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: vcnl3020: add proximity rate

Add the proximity rate optional option and handling of it for
vishay vcnl3020.

Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210225201444.12983-2-i.mikhaylov@yadro.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: npcm_adc: Replace indio_dev->mlock with own device lock

As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state structure.

This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Link: https://lore.kernel.org/r/20200928131333.36646-3-mircea.caprioru@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: palmas_gpadc: Replace indio_dev->mlock with own device lock

As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state structure.

This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Link: https://lore.kernel.org/r/20200928131333.36646-2-mircea.caprioru@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: spear_adc: Replace indio_dev->mlock with own device lock

As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state structure.

This is part of a bigger cleanup.
Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Link: https://lore.kernel.org/r/20200928131333.36646-1-mircea.caprioru@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:ABI docs: Combine the two instances of docs for sensor_sensitivity

This control on the gain of a measurement used for time of flight sensing
is standard but the expected values for different enviroments may not be.
As we cannot have the same ABI element documented in two files, add a
generic version to sysfs-bus-iio-proximity and a note on the expected
value vs measuring environment for the as3935.

Fixes
$ scripts/get_abi.pl validate
Warning: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity is defined 2 times:  ./Documentation/ABI/testing/sysfs-bus-iio-distance-srf08:0  ./Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935:8

Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210117153816.696693-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:ABI docs: Combine sysfs-bus-iio-humidity-hdc2010/hdc100x into one file

These contain only one entry for out_current_heater_raw (_available).
Document this in a new sysfs-bus-iio-humidity file, and make it a little
more generic by allowing for non 0/1 values.

Fixes
$ scripts/get_abi.pl validate
Warning: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw is defined 2 times:  ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010:0  ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x:0
Warning: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available is defined 2 times:  ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010:1  ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x:1

Cc: Eugene Zaikonnikov <ez@norphonic.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20210117153816.696693-6-jic23@kernel.org

staging: rtl8723bs: remove blank line os_dep/os_intfs.c

remove blank line

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/ae5671883e9a869aced3eece40b587c51e15d520.1616503354.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove unnecessary extern in os_dep/sdio_intf.c

remove unnecessary extern.

The function is defined static in os_dep/os_intfs.c and used only once
in the same file

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/f3a7b2c00221aa09ed782fb30ce55936f443a12d.1616503354.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove undefined function prototype in of os_dep/sdio_intf.c

fix the following checkpatch issue:

WARNING: externs should be avoided in .c files
486: FILE: drivers/staging/rtl8723bs/os_dep/sdio_intf.c:486:
+extern int pm_netdev_close(struct net_device *pnetdev, u8 bnormal);

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/06d61465fd33b6cf6d9428ac983e55f50afd448b.1616503354.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: move function prototypes out of os_dep/int_fs.c

fix the following checkpatch issues:

WARNING: externs should be avoided in .c files
196: FILE: drivers/staging/rtl8723bs/os_dep/os_intfs.c:196:
+int _netdev_open(struct net_device *pnetdev);
--
WARNING: externs should be avoided in .c files
197: FILE: drivers/staging/rtl8723bs/os_dep/os_intfs.c:197:
+int netdev_open(struct net_device *pnetdev);

moved function prototype in include/osdep_intf.h
removed function prototype and made a static
removed unnecessary extern declaration in os_dep/ioctl_cfg80211.c

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/4604b856b9c20f1141e19894f46934cb860eebd4.1616503354.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: remove function prototypes in hal/odm.c

fix the following checkpatch issues:

WARNING: externs should be avoided in .c files
285: FILE: drivers/staging/rtl8723bs/hal/odm.c:285:
+void odm_CommonInfoSelfInit(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
287: FILE: drivers/staging/rtl8723bs/hal/odm.c:287:
+void odm_CommonInfoSelfUpdate(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
289: FILE: drivers/staging/rtl8723bs/hal/odm.c:289:
+void odm_CmnInfoInit_Debug(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
291: FILE: drivers/staging/rtl8723bs/hal/odm.c:291:
+void odm_BasicDbgMessage(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
305: FILE: drivers/staging/rtl8723bs/hal/odm.c:305:
+void odm_RefreshRateAdaptiveMaskCE(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
309: FILE: drivers/staging/rtl8723bs/hal/odm.c:309:
+void odm_RSSIMonitorInit(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
311: FILE: drivers/staging/rtl8723bs/hal/odm.c:311:
+void odm_RSSIMonitorCheckCE(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
313: FILE: drivers/staging/rtl8723bs/hal/odm.c:313:
+void odm_RSSIMonitorCheck(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
315: FILE: drivers/staging/rtl8723bs/hal/odm.c:315:
+void odm_SwAntDetectInit(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
317: FILE: drivers/staging/rtl8723bs/hal/odm.c:317:
+void odm_SwAntDivChkAntSwitchCallback(void *FunctionContext);
--
WARNING: externs should be avoided in .c files
321: FILE: drivers/staging/rtl8723bs/hal/odm.c:321:
+void odm_GlobalAdapterCheck(void);
--
WARNING: externs should be avoided in .c files
323: FILE: drivers/staging/rtl8723bs/hal/odm.c:323:
+void odm_RefreshRateAdaptiveMask(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
325: FILE: drivers/staging/rtl8723bs/hal/odm.c:325:
+void ODM_TXPowerTrackingCheck(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
327: FILE: drivers/staging/rtl8723bs/hal/odm.c:327:
+void odm_RateAdaptiveMaskInit(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
330: FILE: drivers/staging/rtl8723bs/hal/odm.c:330:
+void odm_TXPowerTrackingInit(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
338: FILE: drivers/staging/rtl8723bs/hal/odm.c:338:
+void odm_InitHybridAntDiv(struct dm_odm_t *pDM_Odm);
--
WARNING: externs should be avoided in .c files
340: FILE: drivers/staging/rtl8723bs/hal/odm.c:340:
+bool odm_StaDefAntSel(
--
WARNING: externs should be avoided in .c files
349: FILE: drivers/staging/rtl8723bs/hal/odm.c:349:
+void odm_SetRxIdleAnt(struct dm_odm_t *pDM_Odm, u8 Ant, bool bDualPath);
--
WARNING: externs should be avoided in .c files
353: FILE: drivers/staging/rtl8723bs/hal/odm.c:353:
+void odm_HwAntDiv(struct dm_odm_t *pDM_Odm);

removed function prototypes  and made staics where needed
in hal/odm.c

moved function definition in file to let the compiler work

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/9a92a2f29c2c9fb3c386a3c1d0d25f628845c563.1616503354.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: delete extern declarations in core/rtw_wlan_util.c

fix the following checkpatch issues:

WARNING: externs should be avoided in .c files
28: FILE: drivers/staging/rtl8723bs/core/rtw_wlan_util.c:28:
+extern unsigned char RTW_WPA_OUI[];
--
WARNING: externs should be avoided in .c files
29: FILE: drivers/staging/rtl8723bs/core/rtw_wlan_util.c:29:
+extern unsigned char WPA_TKIP_CIPHER[4];

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/0fa08b70af86b2ee88564179a22d908a643bed1f.1616503354.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: removed function prototypes and made statics in core/rtw_recv.c

fix the following checkpatch issue:

WARNING: externs should be avoided in .c files
1190: FILE: drivers/staging/rtl8723bs/core/rtw_recv.c:1190:
+signed int validate_recv_mgnt_frame(struct adapter *padapter, union recv_frame *precv_frame);

removed function prototypes and made statics

moved two static function definitions before their usage
to make code compile

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/e40951ad0d3ba103b1551e8f2e54c7bc45563346.1616503354.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: moved function prototype out of core/rtw_ioctl_set.c and core/rtw_mlme.c

fix the following checkpatch issues:

WARNING: externs should be avoided in .c files
40: FILE: drivers/staging/rtl8723bs/core/rtw_ioctl_set.c:40:
+u8 rtw_do_join(struct adapter *padapter);

WARNING: externs should be avoided in .c files
15: FILE: drivers/staging/rtl8723bs/core/rtw_mlme.c:15:
+extern u8 rtw_do_join(struct adapter *padapter);

moved function prototype in include/rtw_ioctl_set.h

Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/da654adf1295123adca07e3e5809e256dd4def69.1616503354.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>