radeon/winsys: introduce radeon_winsys_cs_chunk

We will chain multiple chunks together and will keep pointers to the older
chunks to support IB dumping.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi/sid: add packet definitions for IB chaining

While we're at it, add packet printing in si_debug.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

winsys/amdgpu: start with smaller IBs, growing as necessary

This avoids allocating giant IBs from the outset, especially for CE and DMA.

Since we now limit max_dw only by the size that the buffer happens to be
(which, due to the buffer cache, can be even larger than the rounded-up size
we request), the new function amdgpu_ib_max_submit_dwords controls when we
submit an IB.

With this change, we effectively never flush prematurely due to the CE IB,
after an initial warm-up phase.

v2:
- clean up buffer_size calculation

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

winsys/amdgpu: add amdgpu_ib and amdgpu_cs_from_ib helper functions

The latter function allows getting the containing amdgpu_cs from any IB
(including non-main ones).

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

winsys/amdgpu: extract IB big buffer allocation for re-use

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

winsys/amdgpu: add IB buffer in amdgpu_get_new_ib

Adding the buffer when we start using it for the IB makes the logic for
chaining a bit simpler.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: use cs_check_space throughout

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeon/winsys: add cs_check_space

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

winsys/amdgpu: simplify interface of amdgpu_get_new_ib

We'll want to have an amdgpu_cs pointer for future changes.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

winsys/amdgpu: add amdgpu_cs_has_user_fence

v2: style change

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

i965: Fix isoline reads in scalar TES.

Isolines aren't reversed.  commit 5b2d8c2273c6f fixed this for the vec4
TES backend, but not the scalar one.

Found while debugging GL45-CTS.tessellation_shader.
tessellation_control_to_tessellation_evaluation.gl_tessLevel.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org

st/mesa: implement PBO downloads for ReadPixels

v2: require PIPE_CAP_SAMPLER_VIEW_TARGET; technically only needed for some of
    the texture targets, but all hardware that has shader images should also
    have this cap.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: hook up a no-op try_pbo_readpixels

For better bisectability given that the order of some of the fallback tests
in the blit path are rearranged.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: add layer_offset to PBO fragment shader

This will be used to select a slice of a 3D texture.

v2: fix a comment (Marek)

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: create PBO download fragment shaders

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: add PBO download enable bit and fragment shaders

For downloads, the fragment shader must know the source texture target, hence
we may cache multiple fragment shaders.

v2: break long line (Marek)

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: move shareable parts of PBO upload state and draw to st_pbo.c

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: move PBO buffer address calculation to st_pbo.c

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: move PBO upload fs creation to st_pbo.c

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: rename pbo_upload to pbo

At the same time, rename members that are upload-specific to say so.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: move PBO vertex and geometry shader creation to st_pbo.c

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

st/mesa: begin moving PBO functions into their own file

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/cso: allow saving the first fragment shader image slot

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/u_inlines: allow NULL src in util_copy_image_view

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add PIPE_BARRIER_ALL define

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: Use Geom.VerticesOut == -1 to specify unset

Because apparently layout(max_vertices=0) is a thing.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

i965: If control_data_header_size_bits is zero, don't do EndPrimitive

This can occur when max_vertices=0 is explicitly specified.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

mesa: Fix bogus strncmp

The string "[0]\0" is the same as "[0]" as far as the C string datatype
is concerned.  That string has length 3.  strncmp(s, length_3_string, 4)
is the same as strcmp(s, length_3_string), so make it be strcmp.

v2: Not the same as strncmp(..., 3).  Noticed by Ilia.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

radeonsi: set correct stencil tile mode for texturing

Sadly, this doesn't affect SI and VI in any way.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

winsys/amdgpu: set flags correctly when allocating depth-stencil buffers

This mimics Vulkan. It also documents how to fix stencil texturing.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/radeon: lower memory usage during texture transfers

This improves throughput by keeping TTM overhead down.

Some piglit tests such as texelFetch and streaming-texture-leak will
use less memory now.

v2: use gart_size / 4 as the threshold

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/radeon: invalidate busy linear textures for whole-texture uploads

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

gallium/radeon: degrade tiled textures mapped often to linear

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

gallium/radeon: clean up and better comment use_staging_texture

Next commits will add other things around this.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: set some colorbuffer register fields at emit time

to allow reallocating the texture storage with different parameters

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: implement global resetting of texture descriptors

it will be used by texture reallocation

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: move code for setting one shader image into separate function

v2: fix set_shader_images(..., NULL). Found by Christoph Haag.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: set some image descriptor fields at bind time

mainly the fields that can change by reallocating a texture and changing
the tile mode

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

gallium/radeon: strenghten some checking for DMA preparation

Just for consistency. This doesn't fix anything, because DCC is not
supported with non-mipmapped textures.

v1.1: fix the comment about DCC

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

gallium/util: add util_texrange_covers_whole_level from radeon

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nir: allow sat on all float destination types

With the introduction of fp64 and fp16 to nir, there are now a bunch of
float types running around. A F1 2015 shader ends up with an i2f.sat
operation, which has a nir_type_float32 destination. Allow sat on all
the float destination types.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radeonsi: fix the raster config setup for 1 RB iceland chips

I didn't realize there were 1 and 2 RB variants when this code
was originally added.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>

mesa/sampler: fix error codes for sampler parameters.

The initial ARB_sampler_objects spec had GL_INVALID_VALUE in it,
however version 8 of it fixed this, and the GL specs also have
the fixed value in them.

Fixes:
GL45-CTS.texture_border_clamp.samplerparameteri_non_gen_sampler_error

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glsl: define some GLES3 constants in GLSL 4.1

The GLSL 4.1 spec adds:
gl_MaxVertexUniformVectors
gl_MaxFragmentUniformVectors
gl_MaxVaryingVectors

This fixes:
GL45-CTS.gtf31.GL3Tests.uniform_buffer_object.uniform_buffer_object_build_in_constants

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965: Add norbc debug option

This INTEL_DEBUG option disables lossless compression (also known
as render buffer compression).

v2: (Matt) Use likely(!lossless_compression_disabled) instead of
           !likely(lossless_compression_disabled)
    (Grazvydas) Update docs/envvars.html

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/gen9: Configure rbc buffers as plain for non-rbc tex views

Fixes rendering in Shadow of Mordor with rbc. Application writes
RGBA_UNORM texture filling it with values the application wants to
later on treat as SRGB_ALPHA.
Intel driver enables lossless compression for the buffer by the time
of writing. However, the driver fails to make sure the buffer can be
sampled as something else later on and unfortunately there is
restriction in the hardware for using lossless compression for srgb
formats which looks to extend itself to the sampling engine also.
Requesting srgb to linear conversion on top of compressed buffer
results the color values to be pretty much garbage.

Fortunately none of tracked benchmarks showed a regression with
this.

v2 (Matt): Add missing space

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix the passthrough TCS for isolines.

We weren't setting up several of the uniform values for the patch
header, so we'd crash when uploading push constants.  We at least
need to initialize them to zero.  We also had the isoline parameters
reversed, so it would also render incorrectly (if it didn't crash).

Fixes a new Piglit test(*) (isoline-no-tcs), as well as crashes in
GL44-CTS.tessellation_shader.single.max_patch_vertices.

(*) https://lists.freedesktop.org/archives/piglit/2016-May/019866.html

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: mesa-stable@lists.freedesktop.org

i965/xfb: skip components in correct buffer.

The driver was adding the skip components but always for buffer 0.

This fixes:
GL45-CTS.gtf40.GL3Tests.transform_feedback3.transform_feedback3_skip_multiple_buffers

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glsl/linker: fix multiple streams transform feedback.

e2791b38b42f83add5b07298c39741bf0a6d7d4b
mesa/program_interface_query: fix transform feedback varyings.

caused a regression in
GL45-CTS.gtf40.GL3Tests.transform_feedback3.transform_feedback3_multiple_streams
on radeonsi.

The problem was it was using the skip components varying to set
the stream id, when it should wait until a varying was written,
this just adds the varying checks in the right place.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa/bufferobj: use mapping range in BufferSubData.

According to GL4.5 spec:
An INVALID_OPERATION error is generated if any part of the speci-
fied buffer range is mapped with MapBufferRange or MapBuffer (see sec-
tion 6.3), unless it was mapped with MAP_PERSISTENT_BIT set in the Map-
BufferRange access flags.

So we should use the if range is mapped path.

This fixes:
GL45-CTS.buffer_storage.map_persistent_buffer_sub_data

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: "12.0, 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

nv50/ir: fix error finding free element in bitset in some situations

This really only hits for bitsets with a size of a multiple of 32. We
can end up with pos = -1 as a result of the ffs, which we in turn decide
is a valid position (since we fall through the loop and i == 1, we end
up adding 32 to it, so end up returning 31 again).

Up until recently this was largely unreachable, as the register file
sizes were all 63 or 255. However with the advent of compute shaders
which can restrict the number of registers, this can now happen.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

nv50/ir: print relevant file's bitset when showing RA info

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

Revert "glsl: fix xfb_offset unsized array validation"

This reverts commit aac90ba2920cf5ceb4df6dba776dd3952780e456.

The commit caused a regression in:
piglit.spec.glsl-1_50.compiler.gs-input-nonarray-named-block.geom

Also the CTS test it was meant to fix seems like it may be bogus.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>

i965/fs: Allow scalar source regions on SNB math instructions.

I haven't found any evidence that this isn't supported by the
hardware, in fact according to the SNB hardware spec:

 "The supported regioning modes for math instructions are align16,
  align1 with the following restrictions:
   - Scalar source is supported.
  [...]
   - Source and destination offset must be the same, except the case of
     scalar source."

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/fs: Fix constant combining for instructions that cannot accept source mods.

This is the case for SNB math instructions so we need to be careful
and insert the literal value of the immediate into the table (rather
than its absolute value) if the instruction is unable to invert the
sign of the constant on the fly.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/fs: Extend remove_duplicate_mrf_writes() to handle non-VGRF to MRF copies.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/fs: Fix compute_to_mrf() to coalesce VGRFs initialized by multiple single-GRF writes.

Which requires using a bitset instead of a boolean flag to keep track
of the GRFs we've seen a generating instruction for already.  The
search loop continues until all instructions initializing the value of
the source VGRF have been found, or it is determined that coalescing
is not possible.

Fixes a few piglit test cases on Gen4-6 which were regressed by
6956015aa514f2d06d0e4b33bfe6bca83142fbf0 due to the different (yet
perfectly valid) ordering in which copy instructions are emitted now
by the simd lowering pass, which had the side effect of causing this
optimization pass to start corrupting the program in cases where a
VGRF-to-MRF copy instruction would be eliminated but only the last
instruction writing to the source VGRF region would be rewritten to
point to the target MRF.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/fs: Teach compute_to_mrf() about the COMPR4 address transformation.

This will be required to correctly transform the destination of 8-wide
instructions that write a single GRF of a VGRF to MRF copy marked
COMPR4.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/fs: Refactor compute_to_mrf() to split search and rewrite into separate loops.

This will allow compute_to_mrf to handle cases where the source of the
VGRF-to-MRF copy is initialized by more than one instruction.  In such
cases we cannot rewrite the destination of any of the generating
instructions until it's known whether the whole VGRF source region can
be coalesced into the destination MRF, which will imply continuing the
search until all generating instructions have been found or it has
been determined that the VGRF and MRF registers cannot be coalesced.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/fs: Fix compute-to-mrf VGRF region coverage condition.

Compute-to-mrf was checking whether the destination of scan_inst is
more than one component (making assumptions about the instruction data
type) in order to find out whether the result is being fully copied
into the MRF destination, which is rather inaccurate in cases where a
single-component instruction is only partially contained in the source
region, or when the execution size of the copy and scan_inst
instructions differ.  Instead check whether the destination region of
the instruction is really contained within the bounds of the source
region of the copy.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/fs: Simplify and improve accuracy of compute_to_mrf() by using regions_overlap().

Compute-to-mrf was being rather heavy-handed about checking whether
instruction source or destination regions interfere with the copy
instruction, which could conceivably lead to program miscompilation.
Fix it by using regions_overlap() instead of the open-coded and
dubiously correct overlap checks.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965/fs: Teach regions_overlap() about COMPR4 MRF regions.

Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

Don't use python 3

Now there are not files that require python 3, so for now just remove
the python 3 dependency and use python 2. I think the right plan is to
just get all of the python ready for python 3, and then use whatever
python is available.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>

genxml: change chbang to python 2

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>

genxml: use the isalpha method rather than str.isalpha.

This fixes gen_pack_header to work on python 2, where name[0] is unicode
not str.

Signed-off-by: Dylan Bake <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>

genxml: require future imports for python2 compatibility.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>

genxml: mark re strings as raw

This is a correctness issue.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>

genxml: Make classes descendants of object

This is the default in python3, but in python2 you get old style
classes. No one likes old-style classes.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>

genxml: mark gen_pack_header.py as encoded in utf-8

There is unicode in this file, and I'm actually surprised that the
python interpreter hasn't gotten grumpy.

Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>

radeonsi: Decompress DCC textures in a render feedback loop.

By using a counter to quickly reject textures that are not
bound to a framebuffer, the performance impact when binding
sampler_views/images is not too large.

Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Add counter to check if a texture is bound to a framebuffer.

Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

vc4: Fix compiler warnings in fail_instr path of QIR validate pass

Introduced in 8e2d0843c02daf5280184f179ae8ed440ac90d7f.

Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

anv: let anv_entrypoints_gen.py generate proper Wayland/Xcb guards

The generated sources should follow the example set by the vulkan
headers and our non-generated code. Namely: the code for all supported
platforms should be available, each one guarded by its respective
VK_USE_PLATFORM_*_KHR macro.

v2: Reword commit message.

Cc: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96285
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1 over IRC)

svga: change enum pipe_resource_usage back to unsigned

This parameter is actually a bitmask of PIPE_TRANSFER_x flags.
Change it back to a simple unsigned type.  IIRC, some compilers
complain about masks of enum values.  Also, this make the function
signature match u_resource_vtbl::transfer_map() again.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

radeonsi: fix CP DMA hazard with index buffer fetches

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

r600g: do GL-compliant integer resolves

The GL spec has been clarified and the new rule says we should just
copy 1 sample. u_blitter does the right thing.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: do GL-compliant integer resolves

The GL spec has been clarified and the new rule says we should just
copy 1 sample. u_blitter does the right thing.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/u_blitter: do GL-compliant integer resolves

The GL spec has been clarified and the new rule says we should just
copy 1 sample.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

mesa: fix crash in driver_RenderTexture_is_safe

This just fixed the crash with the apitrace in bug report.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95246

Cc: 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: don't flush TC at the end of IBs on DRM >= 3.2.0

It's not needed since it was fixed in the kernel.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

gallium/radeon: fixed division by zero

Coverity is getting a false positive that a division by zero can occur
here. This change will silence the Coverity warnings as a division by zero
cannot occur in this case.

Signed-off-by: Jakob Sinclair <sinclair.jakob@openmailbox.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

st/glsl_to_tgsi: prevent infinite loop

`unsigned j` would never fail `j >= 0`, leading to an infinite loop as
`j--` wraps around.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

glsl/images: bounds check image unit assignment

The CTS test:
GL45-CTS.multi_bind.dispatch_bind_image_textures
binds 192 image uniforms, we reject this later,
but not until after we trash the contents of the
struct gl_shader.

Error now reads:
Too many compute shader image uniforms (192 > 16)
instead of
Too many compute shader image uniforms (2745344416 > 16)

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

nvc0/ir: fix spilling predicates to registers

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cc: "11.1 11.2 12.0" <mesa-stable@lists.freedesktop.org>

nvc0/ir: limit max number of regs based on availability in SM

This effectively limits registers to 32 and 64 for fermi and kepler when
1024 threads are used, but allows the full amount to be used with
smaller thread sizes.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nv50/ir: record number of threads in a compute shader

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nv50/ir: Add missing handling of U64/S64 in inlines

Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

docs: rename release notes to 12.0.0

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 7ad2cb6f08bf318219ceb02d297f794db9221efa)

docs: move nvc0 out of individual lines of GL 4.2, 4.3, ES 3.1

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

docs: add 12.1.0-devel release notes template, bump version

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

docs/GL3: mark radeonsi as all done up to GL 4.3 and GLES 3.1

nir: add the SConscript.nir to the tarball

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

vc4: Fix doxygen warnings

Now that vc4 automated code documentation can be generated with
doxygen, fix the warnings issued by Doxygen 1.8.11.

Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

doxygen: Plumb through gallium/ to automated documentation

Add Gallium and the Gallium-based drivers to doxygen's automated
code documentation infrastructure.

Can be individually created with:

  cd $MESA_TOP_LEVEL/
  make -C doxygen/ gallium.tag

Benefits from the existing doxygen Makefile runners to clean up
afterwards with 'make clean'.

Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

Revert "osmesa: don't try to bundle osmesa.def SConscript"

This reverts commit c07df0f2014636b601cdbaff63214296599b1ad5.

Now that the SCons build is back we need to include the files in the
tarball.

scons: build osmesa swrast and gallium

This patch makes it possible to build classic osmesa/swrast on windows
again. It was removed in commit 69db422218b0264b5b8eef45bd003a2544e9cbd6.
Although there is a gallium version of osmesa now, the swrast version
still has more features lacking in llvmpipe, e.g. anisotropic filtering.

Tested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
[Emil Velikov: remove trailing whitespace]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

automake: rework the git_sha1.h rule, include in tarball

As we'll need the file in the release tarball, rework the rule so that
the file is regenerated _only_ if we're in a git repository.

With this in place we can build vulkan (anv) from a release tarball.

Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Kristian Høgsberg Kristensen <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

automake: move the git_sha1.h rule a level up

This way we can reuse the header from other places like -
src/intel/vulkan and src/gallium. Only the former is hooked up atm.

Make sure .gitignore is updated, as well as all the users (the mesa
code does not need any changes).

Also ensure that the file is always created by adding it to the
BUILT_SOURCES target.

Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Kristian Høgsberg Kristensen <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

mesa_glinterop: remove mesa_glinterop typedefs

As is there are two places that do the typedefs - dri_interface.h and
this header. As we cannot include the former in here, just drop the
typedefs and use the struct directly (as needed).

This is required because typedef redefinition is C11 feature which is
not supported on all the versions of GCC used to build mesa.

v2: Kill the typedef alltogether, as per Marek.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96236
Cc: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glx/glvnd: automake: include all the sources in libglx_la_SOURCES

Otherwise the headers will be missing from the release tarball.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>