staging: comedi: pcmuio: introduce pcmuio_read()

Introduce a helper function to handle reading a 24-bit value from the
three 8-bit registers associated with a "port" or "page".

Simplify the for() loop in pcmuio_handle_asic_interrupt() that finds
which channels have triggered the interrupt.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: simplify interrupt subdevice init

Only subdevices 0 and 2 support interrupts. Simplify the attach
a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'iobases' from subdevice private data

The 'asic' and 'port' associated with a given subdevice can easily be
found based on the subdevice 'index'. With that information we can
then calculate the correct iobase and register offset needed to read/
write the 8-bit ports.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'iobase' from private data

It's simple enough to calculate the iobase when needed. Remove this
member from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: simplify 'n_subdevs' and 's->n_chan'

The number of subdevices needed by the driver is based on the
'num_asics' reported by the boardinfo and each subdevice always
has 24 channels. Simplify the attach a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove unused boardinfo

These members of the boardinfo are not used by the driver. Remove
them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: kzalloc'ed data does not need cleared

The 'subpriv' pointer is kzalloc'ed during the attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'asic_chan'

This member of the subdevice private data is always initialize to
'0' due to the 'thisasic_chanct' always being zero when it is set
during the attach. Simplify the driver a bit by removing it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'num_asic_chans'

This member of the subdevice private data is always initialize to
s->n_chan if the subdevice supports interrupts and is only used
in functions that can be called by the interrupt subdevice.

Simplyfy the driver a bit  by removing it and just using s->n_chan.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'first_chan'

This member of the subdevice private data is always initialize to
'0' due to the 'byte_no' always being zero when it is set during
the attach. Simplify the driver a bit by removing it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove unused private data variables

These members of the private data are either not referenced or are set
but never used by the driver. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: introduce pcmuio_write()

Introduce a helper function to handle writing a 24-bit value to the
three 8-bit registers associated with a "port" or "page".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: tidy up switch_page()

All the I/O ports are left unlocked in the driver so the 'pagelock'
in the private data is not necessary. The paranoia sanity checks
are also unnecessary, Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: tidy up the register map defines

Add namespace to the register map defines. Gather them together
and tidy them up a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove unused {lock,unlock}_port()

These functions are #ifdef'ed out and not needed in the driver.
Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: have comedi_set_spriv() allocate the memory

As suggested by Ian Abbott, comedi_set_spriv() can only be used to
set the subdevice->private pointer to something that can be kfree()'d.
Rename the function to comedi_alloc_spriv() and have it kzalloc() the
memory as well as set the private pointer. This saves a function call
in the drivers and avoids the possibility of incorrectly calling
comedi_set_spriv() for some pointer that is not meant to be kfree()'d.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove unused 'i_NbrTTLChannel' boardinfo

None of the addi-data drivers that still use the "common" code have
ttl digital i/o. Remove the unnecessary boardinfo as well as the
subdevice initialization code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove unused 'i_Dma' present flag

None of the addi-data drivers that still use the "common" code support
dma. Remove the unnecessaary boardinfo and private data flags.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove unused vars from boardinfo

Due to the on-going cleanup of the addi-data drivers, the boardinfo
used in the "common" code has a number of variables that are not
used. Remove the cruft.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove unused defines in addi_common.h

Due to the on-going cleanup of the addi-data drivers, there are a
number of unused defines in addi_common.h. Remove the cruft.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: simplify the PCI bar reading

All of the remaining addi-data drivers that use the "common" code
either do not have an eeprom or the PCI controller chip is not a
PLX PCI 9054. Knowing this we can simplify the common code that
reads the PCI bars to get the iobase addresses.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: remove unused vars from private data

Due to the on-going cleanup of the addi-data drivers, the private
data used in the "common" code has a number of variables that
either are not used at all or or set but never used.

Remove all of them from the private data and the unnecessary use
in the drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix comments in r819xU_phy.c

This patch fixes the comments in r819xU_phy.c by:
- replacing "// ..." with "/* .... */"
- removing unnecessary comments, the dates and names of
  developers from comments
- fixing some inconsistent comments
- fixing some typos
- fixing alignment issues

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spaces around ',' in r819xU_phy.c

This patch fixes the whitespace around ',' to meet the
linux kernel coding style.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove variable 'Ret' in r819xU_phy.c

This patch removes variable 'Ret' from rtl8192_QueryBBReg()
since its value is returned immediately after it is
assigned. The name 'Ret', anyway, does not give any
insight and the function description comment is sufficiently
informative regarding the returned value.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: netlogic: fix missing free_netdev() on error in xlr_net_probe()

Fix missing free_netdev() before return from function xlr_net_probe()
in the devm_ioremap_resource() error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: move more assignments out of if conditions

Remove more assignments from if-statement conditions in bpctl_mod.c,
resolving checkpatch.pl errors. Those that remain need more attention
than I'm presently prepared to give them.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: move assignments out of if conditions

Remove a bunch of assignments from if-statement conditions in
bpctl_mod.c, resolving checkpatch.pl errors. (This isn't all of
them, but the patch is getting rather long...)

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: remove unnecessary braces in bpctl_mod.c

Remove unnecessary braces in bpctl_mod.c, resolving checkpatch.pl
warnings.

Signed-off-by: Chad Williamson <chad@dahc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: rename general variables in r819xU_phy.c

This patch renames the following variables:
- dwRegAddr and RegAddr into reg_addr
- dwData and Data       into data
- BitShift              into bitshift
- Offset                into offset
- NewOffset             into new_offset
- Bandwidth             into bandwidth

The renaming was done to remove camel case and
unnecessary 'dw' prefix from the above variable names.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: rename *BitMask variables in r819xU_phy.c

This patch renames BitMask and dwBitMask variables into
bitmask to remove camel case.
dwBitMask in the given context can be renamed into simply
bitmask since its number of bits (dw->32) can be deduced
by its type which is u32.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: replace *Value variables in r819xU_phy.c

This patch renames the variables OriginalValue, NewValue,
Original_Value, New_Value and retValue to reg, and
the variables bRegValue and dwRegValue to reg_u8 and
reg_u32, respectively. This is done primarily in
order to reduce the variable name length and consequently
line length.

Also, it replaces the pair of Original and New variables
with one variable.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spaces around relational operators in r819xU_phy.c

This patch fixes the whitespace around relational operators
to meet the linux kernel coding style.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spaces around ';' in r819xU_phy.c

This patch fixes the whitespace around ';' to meet the
linux kernel coding style.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spaces around '=' in r819xU_phy.c

This patch fixes the whitespace around the assignment
operator to meet linux kernel coding style.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx_drm: imx_ldb: fix 18 bit format

Since 18 bit is supported as datawidth in device tree it should be
supported in driver. Beside the LDB channel the IPU channel has also
to be configured to use BGR666.

Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/imx: Add LDB support

This adds support for the LVDS Display Bridge contained
in i.MX5 and i.MX6 SoCs.

Bit mapping, data width, and video timings are configurable
via device tree. Dual-channel mode is supported for a single
high-resolution source.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: remove commented out __list_for_each usage

Also remove another commented out open-coded list manipulation while we're there.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8187se: Convert __list_for_each use to list_for_each

Also remove commented out list manipulation

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: octeon-hcd: eliminate printk()s

Replace one printk() with dev_dbg(), and delete the other.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: octeon-hcd: delete commented-out code

Delete commented-out code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: octeon-hcd: reformat long comments

Fix some comments to fit into 80 colums.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: octeon-hcd: use dev_dbg

Replace DEBUG macros with dev_dbg. Some less useful are completely
deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

silicom: checkpatch: trailing statements

fixed checkpatch error:
trailing statements that should be on next line

Signed-off-by: Lorenz Haspel <lorenz@badgers.com>
Signed-off-by: Michael Banken <michael.banken@mathe.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

silicom: checkpatch: fixed whitespace errors

started cleanfile
also fixed some other whitespace errors cleanfile didn't find

Signed-off-by: Lorenz Haspel <lorenz@badgers.com>
Signed-off-by: Michael Banken <michael.banken@mathe.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: lines over 80 characters fixed

Changed name of one variable, so that all lines are now below 80
characters.

Signed-off-by: Bernd Bassimir <bassimir.kernel@gmx.de>
Signed-off-by: Nico Doerr <nico.doerr@hawo.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: Fixed coding style CamelCases

Changed names of several variables, that contained CamelCases.

Signed-off-by: Bernd Bassimir <bassimir.kernel@gmx.de>
Signed-off-by: Nico Doerr <nico.doerr@hawo.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix function arguments position in r819xU_phy.c

This patch fixes the alignment of function arguments to make
it uniform across the driver trying to keep the line size
below 80 characters.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spaces around ( and ) in r819xU_phy.c

This patch removes whitespace after ')' and before ')'
following the linux kernel coding style conventions.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove commented-out code in r819xU_phy.c

This patch removes commented-out code to improve code
readability.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spaces around for and while in r819xU_phy.c

This patch fixes whitespace around 'for' and 'while'
following the linux kernel coding style conventions.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spaces around 'if' in r819xU_phy.c

This patch fixes whitepace around 'if' following the linux
kernel coding style convention.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix return statements in r819xU_phy.c

This patch fixes the following checkpatch error:
ERROR: return is not a function, parentheses are not required

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix braces in r819xU_phy.c

This patch fixes the brace position and the whitespace
around braces.

That corrects the following checkpatch errors:
ERROR: that open brace { should be on the previous line
ERROR: else should follow close brace '}'
ERROR: space required after that close brace '}'

Also, it removes completely an if(0) statement,
instead of correcting its braces.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix bitshift calculation in r819xU_phy.c

This patch uses the ffs linux built-in routine in the
computation of the bitshift to take advantage of
architecture specific instructions that implement this
computation more efficiently.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: mac.c MACvDisableKeyEntry remove dead code wOffset

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: mac.c Remove commented out dead code

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: mac.c pbyData Remove magic number array size

Array size always equals ARRAY_SIZE of pbyData

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: octeon-hcd: make internal variable static

Make an internal variable static.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: octeon-hcd: fix some includes

Avoid including from "asm/".

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: octeon-hcd: add missing braces

One else branch was missing braces.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: octeon-hcd: use tabs for code indent

Replace spaces with tabs where possible.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: Fix obvious logic error in staging/csr

In uf_process_ma_packet_req() (staging/csr/unifi_pdu_processing.c), the
test for
(staInfo->timSet != CSR_WIFI_TIM_RESET) || (staInfo->timSet !=
CSR_WIFI_TIM_RESETTING)
obviously makes no sense and causes GCC to emit a warning if
-Wlogical-op is enabled.
As suggested in the referenced bug report, || was replaced by &&.

References: https://bugzilla.kernel.org/show_bug.cgi?id=46571
Reported-By: David Binderman <dcb314@hotmail.com>
Signed-off-by: Tobias Polzer <tobias.polzer@fau.de>
Signed-off-by: Dominik Paulus <dominik.paulus@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: csr: fix the reset of skb mac header

mac_header can be offset if NET_SKBUFF_DATA_USES_OFFSET is set, so
we should call skb_reset_mac_header to reset mac_header.

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: remove event tracing code.

Removes event tracing code as it can be replaced
by in-kernel tracing infrastructure.

Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: keucr: removed unnecessary variables and comments

blen and bn were only used in commented code fragments.
since comments should be informative and not for storing old
code, both, commented code and variables, were removed.

Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: only allocate needed subdevices

The number of subdevices needed by a given board supported by this
driver can cary from 2 (for the apci3500) to a maximum of 5. Currently
this driver always allocates 7 subdevices and sets the subdevice type
to COMEDI_SUBD_UNUSED for the ones that are not needed.

Calculate the actual number of needed subdevices from the boardinfo
and only allocate and setup the ones that are used.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: fix the analog input subdevice

The analog input subdevice support functions in hwdrv_apci3xxx.c
do not follow the comedi API.

The (*insn_config) function overrides the INSN_CONFIG_DIO_INPUT
instruction as an internal APCI3XXX_CONFIGURATION instruction. The
APCI3XXX_CONFIGURATION instruction requires 4 data parameters but
the comedi core sanity checks the INSN_CONFIG_DIO_INPUT instruction
which only has 1 data parameter. Because of this the (*insn_config)
function can never be called.

The (*insn_read) function is supposed to do "one-shot" or "software-
triggered" reads and return the data. The function in hwdrv_apci3xxx.c
does do this but it also is used to optionally start a "hardware-
triggered" conversion. Hardware-triggered conversions should be done
with the comedi_async command functions.

Delete the hwrdv_apci3xxx.c file and fix the analog input subdevice
in the driver by:

1) add a new (*insn_read) function for "one-shot" reads
2) implement the (*do_cmdtest) and (*do_cmd) functions for
   "hardware-triggered" asyncronous reads
3) fix the interrupt handler to return the read data via the
   comedi_async buffer

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: stub in analog input command support

The analog input subdevice in this driver is broken. The attach of
this driver requests the irq and sets the dev->read_subdev to the
analog input subdevice but it does not setup the subdevice to support
commands.

Stub in the command support functions so we can fix the subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: tidy up analog input subdevice init

For aesthetic reasnons, add some whitespace to the analog input
subdevice initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove 'b_SingleDiff' private data

The analog reference desired for the acquisition is stored in the
insn->chanspec that is passed to the (*insn_read) function. There is
no need to use a private data variable to hold the desired analog
reference that is set in the (*insn_config).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove 'i_NbrAiChannelDiff' boardinfo

The number of differential analog input channels is always half the
number of single-ended channels, 'ai_n_chan', or all the channels
if the board does not support single-ended channels. We can use the
'ai_subdev_flags' boardinfo to determine if the board does not support
single-ended channels.

To simplify the boardinfo, remove the 'i_NbrAiChannelDiff' and just
use 'ai_n_chan' to specify the number of channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: rename 'i_NbrAiChannel'

Rename this CamelCase boardinfo variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: rename 'ui_MinAcquisitiontimeNs'

Rename this CamelCase boardinfo variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: clarify 'b_AvailableConvertUnit'

This boardinfo defines the conversion time bases that the analog input
subdevice supports (ns, us, ms).

Add some defines to get rid of the magic numbers and clarify the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: tidy up i_APCI3XXX_AnalogInputConfigOperatingMode()

The analog input subdevice is broken in this driver. To help fix
it, tidy up this (*insn_config) helper function.

Rename the CamelCase function and all the CamelCase local variables.

Refactor the sanity checks to make the function a bit more concise
and remove the printk noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: tidy up i_APCI3XXX_InsnConfigAnalogInput()

The analog input subdevice is broken in this driver. To help fix
it, tidy up this (*insn_config) function.

Rename the CamelCase function.

Move the (insn->n == 4) test from i_APCI3XXX_AnalogInputConfigOperatingMode()
to this function.

Make the function a bit more concise and remove the printk noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: properly set the analog input subdev_flags

Some of the boards supported by this driver only have differential
analog inputs. Add a new boardinfo, 'ai_subdev_flags', to allow
properly setting the subdev_flags for the analog input subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: rename boardinfo 'i_AiMaxData'

Rename this CamelCase boardinfo. Also, change its type to match
the type of comedi_subdevice 'maxdata'.

For aesthetic reasons, change the values to hex since this is more
common for the 'maxdata' values in comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: rename boardinfo 'pc_DriverName'

Rename this CamelCase boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove 'i_AiChannelList' from the boardinfo

The analog input s->len_chanlist for the boards supported by this driver
should always be the number of channels (s->n_chan). Use that instead
and remove the 'i_AiChannelList' from the boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove 'tsk_Current' from private data

The interrupt function should be using comedi_event() to let the user
know data is available from the analog input subdevice.

The analog input subdevice is currently broken and nothing sets
tsk_Current anyway so just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: rename 'dw_AiBase' in private data

This variable holds the ioremap'ed PCI bar 3 used to read/write the
analog input and output registers. Rename it to simply 'mmio'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove 'iobase' from private data

The private data 'iobase' is the same as the comedi_device 'iobase'.
Use the one in the comedi_device instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove 'i_IobaseReserved' from private data

This variable is not used by the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: tidy up i_APCI3XXX_InsnReadAnalogInput()

The analog input subdevice in this driver is broken. It abuses the
comedi API and will not work as-is. Start cleaning it up so it can
be fixed.

Rename the CamelCase function and the local variables.

Refactor the function to remove the indents. Most of the indents are
left over from the previous patches.

Invert the early tests to provide a quick exit from the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove sanity checks in i_APCI3XXX_InsnReadAnalogInput()

The comedi core validates the insn->chanspec channel and range before
calling the subdevice (*insn_read) function.

Remove the unnecessary sanity checks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove 'b_AiInitialisation' from private data

This variable is set during the attach of the board and never cleared
so the test in i_APCI3XXX_InsnReadAnalogInput() will always succeed.
Just remove the variable to help with cleaning up this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove unused define

This define is not used by the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: refactor the ttl digital i/o support

Currently, the subdevice functions used to configure and read/write the
ttl digital i/o ports is way over to complicated. The (*insn_config)
function also abuses the comedi API by overriding the instruction
command passed in data[0].

Fix the ttl digital i/o support to work like the comedi core expects.

The (*insn_config) function supports the three instructions common for
COMEDI_SUBD_DIO subdevices:

    INSN_CONFIG_DIO_INPUT - configure the specified channel as input
    INSN_CONFIG_DIO_OUTPUT - configure the specified channel as output
    INSN_CONFIG_DIO_QUERY - returns the status of the specified channel

    Port 0 (channels 0-7) is always input
    Port 1 (channels 8-15) is always output
    Port 2 (channels 9-23) are programmable i/o (all channels are input or output)

The (*insn_bits) function allows writing to the output channels and returns
the state of all channels.

The (*insn_read) and (*insn_write) functions are not required. The comedi
core will emulate them using the (*insn_bits) function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: absorb i_APCI3XXX_InsnWriteAnalogOutput()

Rename this CamelCase function and absorb it from hwdrv_apci3xxx.c
directly into the driver.

Tidy up the analog output subdevice init by adding some whitespace.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: refactor 'i_NbrAoChannel' boardinfo

The boards that have analog outputs always have 4 channels.

Remove the 'i_NbrAoChannel' data from the boardinfo and add a bit
field to indicate that the board 'has_ao'. Use that to conditionally
initialize the subdevice and open code the s->n_chan value of 4.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: refactor i_APCI3XXX_InsnWriteAnalogOutput()

Rename the CamelCase local variables.

The comedi core validates the insn->chanspec to make sure the channel
number and range are valid for the subdevice. The extra checks in this
function are not required.

(*insn_write) functions are supposed to write all the data passed
in the data pointer (insn->n values) then return the number of data
values written of an errno. Fix this function to work like the core
expects.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: tidy up the ttl digital i/o subdevice init

For aesthetic reasons, add some whitespace to the initialization of the
ttl digital i/o subdevices.

Fix the subdev_flags for the subdevice. The SDF_GROUND and SDF_COMMON
flags only apply to analog subdevices.

Fix the s->iobits for the subdevice. According to the datasheet:
Port 0 (channels 0-7) are always outputs
Port 1 (channels 8-15) are always inputs
Port 2 (channels 9-23) are programmable i/o (default to inputs)

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: tidy up the digital in and out subdevice init

For aesthetic reasons, add some whitespace to the initialization of the
digital input and output subdevices.

Fix the subdev_flags for both subdevices. The SDF_GROUND and SDF_COMMON
flags only apply to analog subdevices. Digital output subdevices do not
need the SDF_READABLE flag set.

Remove the initialization of s->io_bits. It only has meaning for
COMEDI_SUBD_DIO subdevices.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: analog output 'maxdata' is always 12-bit

The boards that have analog outputs always have 12-bit resolution.

Remove the 'i_AoMaxdata' data from the boardinfo and open code the
s->maxdata. Use the hex value for the resolution since that is more
common in comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: refactor 'i_NbrTTLChannel' boardinfo

The boards that have ttl input and output channels always have 24
channels.

Remove the 'i_NbrTTLChannel' data from the boardinfo and add a bit
field to indicate that the board 'has_ttl_io'. Use that to conditionally
initialize the subdevice and open code the s->n_chan value of 24.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: refactor 'i_NbrD[io]Channel' boardinfo

The boards that have digital input and output channels always have
4 inputs and 4 outputs.

Remove the 'i_NbrD[io]Channel' data from the boardinfo and add two
bit fields to indicate that the board 'has_dig_in' and 'has_dig_out'.
Use those to conditionally initialize the subdevices and open code
the s->n_chan value of 4 for both subdevices.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: remove 'i_IorangeBase1' from boardinfo

This data in the boardinfo is not used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: move the copyright info to the driver

Move the copyright information from hwdrv_apci3xxx.c to the actual
driver, addi_apci_3xxx.c.

Reformat the information to follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>