Maciej W. Rozycki [Mon, 5 Feb 2018 14:05:51 +0000 (14:05 +0000)]
RISC-V/GAS: Correct an `expr' global shadowing error for pre-4.8 GCC
Correct a commit
f0531ed6a429 ("Compress loads/stores with implicit 0
offset.") regression and remove a `-Wshadow' compilation error:
cc1: warnings being treated as errors
.../gas/config/tc-riscv.c: In function 'riscv_handle_implicit_zero_offset':
.../gas/config/tc-riscv.c:1194: error: declaration of 'expr' shadows a global declaration
.../gas/expr.h:180: error: shadowed declaration is here
make[4]: *** [tc-riscv.o] Error 1
which for versions of GCC before 4.8 prevents GAS for RISC-V targets
from being built. See also GCC PR c/53066.
gas/
* config/tc-riscv.c (riscv_handle_implicit_zero_offset): Rename
`expr' parameter to `ep'.
Maciej W. Rozycki [Mon, 5 Feb 2018 14:05:51 +0000 (14:05 +0000)]
RISC-V/BFD: Correct a missing initializer error with pre-4.7 GCC
Correct a commit
9d06997adb88 ("RISC-V: Relax RISCV_PCREL_* to
RISCV_GPREL_*") regression and remove a `-Wmissing-field-initializers'
compilation error:
cc1: warnings being treated as errors
.../bfd/elfnn-riscv.c: In function '_bfd_riscv_relax_pc':
.../bfd/elfnn-riscv.c:3117: error: missing initializer
.../bfd/elfnn-riscv.c:3117: error: (near initialization for 'hi_reloc.hi_addend')
make[4]: *** [elf64-riscv.lo] Error 1
which for versions of GCC before 4.7 prevents support for RISC-V targets
from being built. See also GCC PR c/36750.
bfd/
* elfnn-riscv.c (_bfd_riscv_relax_pc): Use `memset' to
initialize `hi_reloc'.
Maciej W. Rozycki [Mon, 5 Feb 2018 14:00:21 +0000 (14:00 +0000)]
MIPS/BFD: Correctly report unsupported `.reginfo' section size
Report an error when an unsupported `.reginfo' section size is found in
`_bfd_mips_elf_section_processing', removing an assertion that triggers
at elfxx-mips.c:7105 in GAS when assembling input like:
.section .reginfo
.word 0xdeadbeef
and in `objcopy --rename-section' when renaming an incorrectly sized
section to `.reginfo'.
bfd/
* elfxx-mips.c (_bfd_mips_elf_section_processing): For
SHT_MIPS_REGINFO sections don't assert the correct size and
report an error instead.
binutils/
* testsuite/binutils-all/mips/mips-reginfo.d: New test.
* testsuite/binutils-all/mips/mips-reginfo-n32.d: New test.
* testsuite/binutils-all/mips/mips-reginfo.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/reginfo-2.d: New test.
* testsuite/gas/mips/reginfo-2-n32.d: New test.
* testsuite/gas/mips/reginfo-2.l: New test stderr output.
* testsuite/gas/mips/reginfo-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Maciej W. Rozycki [Mon, 5 Feb 2018 14:00:21 +0000 (14:00 +0000)]
ELF/BFD: Propagate the return status from backend section processing
Fix the issue of any failure from `->elf_backend_section_processing'
not being propagated by `_bfd_elf_write_object_contents'. The MIPS
`_bfd_mips_elf_section_processing' handler can actually potentially
fail, however the caller currently ignores that.
bfd/
* elf.c (_bfd_elf_write_object_contents): Propagate a failure
status from `->elf_backend_section_processing'.
Maciej W. Rozycki [Mon, 5 Feb 2018 14:00:21 +0000 (14:00 +0000)]
binutils/testsuite: Support stderr options with `run_dump_test'
Add support for the `error', `error_output', `warning' and
`warning_output' options for `run_dump_test' input files, based on the
version of the procedure in ld/testsuite/lib/ld-lib.exp and providing
compatible semantics. These options apply to PROG under test and let
test cases specify output expected on stderr as well as express a
requirement for PROG to exit unsuccessfully. Messages to match against
can be supplied either inline or fetched from a named file. Update
procedure description in the introductory comment accordingly.
As the exit status from `remote_exec' is regrettably lost in our default
implementation of `binutils_run', which is user-overridable, avoid
changing this procedure's API and use a global `binutils_run_status'
variable to pass the status up to the caller, similarly to how
`binutils_run_failed' is handled. Document the new variable in the
respective introductory comments.
binutils/
* testsuite/config/default.exp (binutils_run): Document
`binutils_run_status'.
* testsuite/lib/utils-lib.exp (default_binutils_run): Likewise,
and set it.
(run_dump_test): Add `error', `error_output', `warning' and
`warning_output' options. Update documentation accordingly.
Nick Clifton [Mon, 5 Feb 2018 13:09:15 +0000 (13:09 +0000)]
Updated Brazillian portuguese and Russian translation
Ruslan Kabatsayev [Fri, 19 Jan 2018 06:15:39 +0000 (09:15 +0300)]
Align natural-format register values to the same column
Currently, commands such as "info reg", "info all-reg", as well as register
window in the TUI print badly aligned columns, like here:
eax 0x1 1
ecx 0xffffd3e0 -11296
edx 0xffffd404 -11260
ebx 0xf7fa5ff4 -
134586380
esp 0xffffd390 0xffffd390
ebp 0xffffd3c8 0xffffd3c8
esi 0x0 0
edi 0x0 0
eip 0x8048b60 0x8048b60 <main+16>
eflags 0x286 [ PF SF IF ]
cs 0x23 35
ss 0x2b 43
ds 0x2b 43
es 0x2b 43
fs 0x0 0
gs 0x63 99
After this patch, these commands print the third column values consistently
aligned one under another, provided the second column is not too long.
Originally, the third column was (attempted to be) aligned using a simple tab
character. This patch changes the alignment to spaces only. The tests checking
the output and expecting the single tab have been fixed in a previous patch, so
this change doesn't break any.
gdb/ChangeLog:
* infcmd.c (default_print_one_register_info): Align natural-format
column values consistently one under another.
(pad_to_column): New function.
Joel Brobecker [Mon, 5 Feb 2018 04:45:06 +0000 (23:45 -0500)]
Move comment in gdb/dwarf2read.c::dwarf2_physname
This commit just moves a comment right next to where it is actually
relevant. No actual code change.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_physname): Move commment.
Tested by rebuilding GDB.
GDB Administrator [Mon, 5 Feb 2018 00:00:32 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Sun, 4 Feb 2018 15:51:10 +0000 (07:51 -0800)]
ld/testsuite: Replace -Sw with -SW for readelf
-Sw is a typo. It should be -SW for readelf.
* testsuite/ld-i386/lea1d.d: Replace -Sw with -SW.
* testsuite/ld-i386/lea1e.d: Likewise.
* testsuite/ld-i386/lea1f.d: Likewise.
* testsuite/ld-x86-64/lea1g.d: Likewise.
* testsuite/ld-x86-64/lea1h.d: Likewise.
* testsuite/ld-x86-64/lea1i.d: Likewise.
* testsuite/ld-x86-64/lea1j.d: Likewise.
* testsuite/ld-x86-64/lea1k.d: Likewise.
* testsuite/ld-x86-64/lea1l.d: Likewise.
GDB Administrator [Sun, 4 Feb 2018 00:01:03 +0000 (00:01 +0000)]
Automatic date update in version.in
Andrew Burgess [Fri, 2 Feb 2018 12:51:10 +0000 (12:51 +0000)]
gdb/testsuite: Remove use of dejagnu cleanup proc
The 'cleanup' proc has been removed from dejagnu (Feb 15 2016). The
proc has not done anything useful since at least 2001 so removing
these calls should be harmless.
gdb/testsuite/ChangeLog:
* config/sid.exp (gdb_target_sid): Remove use of cleanup.
* config/sim.exp (gdb_target_sim): Remove use of cleanup.
Nick Clifton [Sat, 3 Feb 2018 13:11:35 +0000 (13:11 +0000)]
Remove PROVIDE() qualifiers from definition of __CTOR_LIST__ and __DTOR_LIST__ symbols in PE linker scripts.
PR 22762
* scripttempl/pe.sc: Remove PROVIDE()s from __CTOR_LIST__ and
__DTOR_LIST__ symbols. Add a comment explaining why this is
necessary.
* scripttemp/pep.sc: Likewise.
* ld.texinfo (PROVIDE): Add a note about the effect of common
symbols.
Sandra Loosemore [Sat, 3 Feb 2018 07:00:02 +0000 (23:00 -0800)]
Disable -shared support in nios2-elf-ld.
2018-02-03 Sandra Loosemore <sandra@codesourcery.com>
* emulparams/nios2elf.sh (GENERATE_SHLIB_SCRIPT): Don't set.
Cary Coutant [Sat, 3 Feb 2018 01:44:27 +0000 (17:44 -0800)]
Add support for DWARF-4 line number tables.
Reads the maximum_operations_per_instruction field, added in DWARF-4 to the
line number program header.
gold/
* PR gold/22776
* dwarf_reader.cc (Sized_dwarf_line_info::read_header_prolog): Add
support for DWARF-4 line number tables.
* dwarf_reader.h (Sized_dwarf_line_info::max_ops_per_insn): New field.
GDB Administrator [Sat, 3 Feb 2018 00:00:31 +0000 (00:00 +0000)]
Automatic date update in version.in
Jim Wilson [Fri, 2 Feb 2018 20:43:09 +0000 (12:43 -0800)]
RISC-V: Fix --wrap and relaxation conflict.
bfd/
PR ld/22756
* elfnn-riscv.c (riscv_relax_delete_bytes): New parameter link_info.
If link_info->wrap_hash, check for a duplicate symbol and ignore.
(_bfd_riscv_relax_call, bfd_riscv_relax_lui, _bfd_riscv_relax_tls_le):
Pass new argument to riscv_relax_delete_bytes.
(_bfd_riscv_relax_align, _bfd_riscv_relax_delete): Likewise. Remove
ATTRIBUTE_UNUSED from link_info parameter.
Leszek Swirski via gdb-patches [Fri, 2 Feb 2018 04:23:28 +0000 (23:23 -0500)]
MI: Allow non-raw varobj evaluation
Make the MI variable object expression evaluation, with the
-var-evaluate-expression command, recursively call pretty printers, to
match the output of normal expression printing.
Consider the following code:
struct Foo { int val; };
struct Wrapper { Foo foo; };
int main() {
Wrapper w;
w.foo.val = 23;
}
and this pretty printer file:
import gdb.printing
class FooPrinter:
def __init__(self, val):
self.val = val
def to_string(self):
return "Foo" + str(self.val["val"])
class WrapperPrinter:
def __init__(self, val):
self.val = val
def to_string(self):
return self.val["foo"]
test_printer = gdb.printing.RegexpCollectionPrettyPrinter("test")
test_printer.add_printer('Foo', '^Foo$', FooPrinter)
test_printer.add_printer('Wrapper', '^Wrapper$', WrapperPrinter)
gdb.printing.register_pretty_printer(None, test_printer)
Setting a breakpoint at the end of the function, we call the following commands:
-enable-pretty-printing
^done
-var-create var_w @ w
^done,name="var_w",numchild="0",value="{val = 23}",type="Wrapper",dynamic="1",has_more="0"
-var-create var_w_foo @ w.foo
^done,name="var_w_foo",numchild="0",value="Foo23",type="Foo",dynamic="1",has_more="0"
-var-evaluate-expression var_w
^done,value="{val = 23}"
-var-evaluate-expression var_w_foo
^done,value="Foo23"
-data-evaluate-expression w
^done,value="Foo23"
-data-evaluate-expression w.foo
^done,value="Foo23"
So, in the -var-evaluate-expression var_w case, we print the "raw" value
of w.foo, while in the -data-evaluate-expression w case, we print the
pretty printed w.foo value. After this patch, all of the above print
"Foo23".
gdb/ChangeLog:
* varobj.c (varobj_formatted_print_options): Allow recursive
pretty printing if pretty printing is enabled.
gdb/testsuite/ChangeLog:
* gdb.python/py-prettyprint.c
(struct to_string_returns_value_inner,
struct to_string_returns_value_wrapper): New.
(main): Add tsrvw variable.
* gdb.python/py-prettyprint.py (ToStringReturnsValueInner,
ToStringReturnsValueWrapper): New classes.
(register_pretty_printers): Register new pretty-printers.
* gdb.python/py-prettyprint.exp (run_lang_tests): Test printing
recursive pretty printer.
* gdb.python/py-mi.exp: Likewise.
Andrew Burgess [Fri, 2 Feb 2018 15:25:31 +0000 (15:25 +0000)]
binutils/riscv: Register names in DWARF output
Adds a register name table for RiscV so that objdump and readelf can
both use better register names.
binutils/ChangeLog:
* dwarf.c (dwarf_regnames_riscv): New register name table.
(init_dwarf_regnames_riscv): New function.
(init_dwarf_regnames): Add call to initialise RiscV register
names.
* dwarf.h (init_dwarf_regnames_riscv): Declare.
* objdump.c (dump_dwarf): Add call to initialise RiscV register
names.
Maciej W. Rozycki [Fri, 2 Feb 2018 18:08:04 +0000 (18:08 +0000)]
LD/testsuite: Pass $AFLAGS_PIC to GAS for PIC assembly
Add $AFLAGS_PIC flags for PIC assembly to a number of tests missing them
and remove `tic6x-*-*' XFAIL annotations from them, previously added to
paper over:
.../ld-new: warning: generating a shared library containing non-PID code
error messages produced due to `-mpic -mpid=near' GAS options having not
been used. Such errors now do not happen anymore, removing:
XFAIL: Build shared library for pr14170
XFAIL: PR ld/21703 shared
XFAIL: Build shared library for broken linker script test
XFAIL: Build pr17068.so
XFAIL: -Bsymbolic-functions
XFAIL: Build pr20995.so
XFAIL: Build pr22374 shared library
with `tic6x-elf' and `tic6x-uclinux' targets. These tests now pass all
except for:
FAIL: PR ld/21703 shared
which is now due to a different reason, as follows:
extra regexps in .../ld/testsuite/ld-elf/pr21703-shared.sd starting with "^Symbol table '\.dynsym' contains [0-9]+ entries:$"
EOF from dump.out
FAIL: PR ld/21703 shared
The addition of $AFLAGS_PIC requires the affected test cases to use the
`list' command rather than `{}' characters to create a list, to avoid
the quoting property `{}' also have in TCL. Consequently the change is
slightly more extensive than it could otherwise be.
ld/
* testsuite/ld-elf/shared.exp: Add $AFLAGS_PIC throughout to PIC
assembly builds where missing and remove `tic6x-*-*' XFAIL
markings accordingly.
Alan Modra [Fri, 2 Feb 2018 06:25:21 +0000 (16:55 +1030)]
PowerPC64, don't relocate nops
This fixes a "bug" in that nops emitted as part of code optimization
were being relocated. As it happens the relocation value was always
zero so the nop wasn't changed. Whew! I've also moved the use of
"howto" later since I was caught out in some recent code changes with
the howto not matching r_type.
* elf64-ppc.c (ppc64_elf_relocate_section): Don't relocate nops
emitted for toc sequence optimization. Set and use "howto" later.
Leszek Swirski [Thu, 25 Jan 2018 16:20:47 +0000 (16:20 +0000)]
Do not classify C struct members as a filename
There is existing logic in C/C++ expression parsing to avoid classifying
names as a filename when they are a field on the this object. This
change extends this logic to also avoid classifying names after a
struct-op (-> or .) as a filename, which otherwise causes a syntax
error.
Thus, it is now possible in the file
#include <map>
struct D {
void map();
}
D d;
to call
(gdb) print d.map()
where previously this would have been a syntax error.
Tested on gdb.cp/*.exp
gdb/ChangeLog:
* c-exp.y (lex_one_token, classify_name, yylex): Don't classify
names after a structop as a filename
gdb/testsuite/ChangeLog:
* gdb.cp/filename.cc, gdb.cp/filename.exp: Test that member
functions with the same name as an include file are parsed
correctly.
GDB Administrator [Fri, 2 Feb 2018 00:00:29 +0000 (00:00 +0000)]
Automatic date update in version.in
Yao Qi [Thu, 1 Feb 2018 15:51:01 +0000 (15:51 +0000)]
Rewrite arm_record_coproc_data_proc and arm_record_data_proc_misc_ld_str
When I triage some reverse debugging test fails on arm-linux, I find
arm_record_coproc_data_proc and arm_record_data_proc_misc_ld_str is not
friendly to instruction encoding on ARM ARM. This patch rewrites them, in
a way match more closely to the manual.
gdb:
2018-02-01 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_data_proc_misc_ld_str): Rewrite it.
(arm_record_coproc_data_proc): Likewise.
Yao Qi [Thu, 1 Feb 2018 15:09:44 +0000 (15:09 +0000)]
set ret signed in arm_record_extension_space
Variable 'ret' should be int rather than unsigned, as it can be -1.
gdb:
2018-02-01 Yao Qi <yao.qi@linaro.org>
* arm-tdep.c (arm_record_extension_space): Change ret to signed.
Yao Qi [Thu, 1 Feb 2018 14:50:23 +0000 (14:50 +0000)]
Fix gdb.base/attach.exp fails when gdb is configured --with-sysroot=/
I see some test fails in gdb.base/attach.exp when gdb is configured
--with-sysroot=/.
FAIL: gdb.base/attach.exp: attach2, with no file
FAIL: gdb.base/attach.exp: load file manually, after attach2 (re-read) (got interactive prompt)
FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
If gdb is configured this way, sysroot is "/" in default, and if binfile
is a absolute path, the regexp pattern $sysroot$escapedbinfile is
incorrect.
There are different ways to fix it, but I don't want to complicate the
test, so I choose this naive way.
gdb/testsuite:
2018-02-01 Yao Qi <yao.qi@linaro.org>
* gdb.base/attach.exp (do_attach_tests): Set sysroot to
"\[^\r\n\]*".
Simon Marchi [Thu, 1 Feb 2018 13:21:41 +0000 (13:21 +0000)]
Fix compile time warnings building the binutils with clang.
bfdI would like to fix instances of the following warning, when building
with clang with no special CFLAGS other than -g3 -O0.
/home/emaisin/src/binutils-gdb/bfd/elflink.c:5425:45: error: performing pointer arithmetic on a null pointer has undefined behavior [-Werror,-Wnull-pointer-arithmetic]
return (struct elf_link_hash_entry *) 0 - 1;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
Replacing those with "(struct elf_link_hash_entry *) -1" gets rid of the
warning. I wanted to check that it didn't change the resulting code, so
I tried to build this:
$ cat test.c
int *before()
{
return (int *) 0 - 1;
}
int *after()
{
return (int *) - 1;
}
$ gcc -c test.c -g
$ objdump -d test.o
test.o: file format elf64-x86-64
Disassembly of section .text:
0000000000000000 <before>:
0: 55 push %rbp
1: 48 89 e5 mov %rsp,%rbp
4: 48 c7 c0 fc ff ff ff mov $0xfffffffffffffffc,%rax
b: 5d pop %rbp
c: c3 retq
000000000000000d <after>:
d: 55 push %rbp
e: 48 89 e5 mov %rsp,%rbp
11: 48 c7 c0 ff ff ff ff mov $0xffffffffffffffff,%rax
18: 5d pop %rbp
19: c3 retq
This shows that the previous code doesn't actually return -1 as the
function documentation says, but the new one does, so it's kind of a
bugfix.
bfd * elf64-ppc.c (ppc64_elf_archive_symbol_lookup): Avoid pointer
arithmetic on NULL pointer.
* elflink.c (_bfd_elf_archive_symbol_lookup,
elf_link_add_archive_symbols): Likewise.
ld * ldexp.c (fold_name, exp_fold_tree_1): Avoid pointer arithmetic
on NULL pointer.
Alan Modra [Thu, 1 Feb 2018 07:31:00 +0000 (18:01 +1030)]
PR22769, crash when running 32-bit objdump on corrupted file
PR 22769
* objdump.c (load_specific_debug_section): Check for overflow
when adding one to section size for a string section terminator.
GDB Administrator [Thu, 1 Feb 2018 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Wed, 31 Jan 2018 20:42:28 +0000 (12:42 -0800)]
Fix testsuite/ld-elf/pr21964-5.c
Mark my_var as used. Otherwise it fails at -O2.
* testsuite/ld-elf/pr21964-5.c (my_var): Mark as used.
Nikola Prica [Wed, 31 Jan 2018 18:23:00 +0000 (19:23 +0100)]
Fix for prologue processing on PowerPC
One of conditions in skip_prologue() was never visited if there was mflr
instruction that moves the link register to a register different than r0.
This condition expects non shifted value of `lr_reg`. Previously offset
of link register was never saved for registers different than r0.
gdb/ChangeLog:
2018-01-31 Nikola Prica <nikola.prica@rt-rk.com>
* rs6000-tdep.c (skip_prologue): Remove shifting for lr_reg and
assign shifted lr_reg to fdata->lr_register when lr_reg is set.
gdb/testsuite/ChangeLog:
2018-01-31 Nikola Prica <nikola.prica@rt-rk.com>
* gdb.arch/powerpc-prologue-frame.s: New file.
* gdb.arch/powerpc-prologue-frame.c: Likewise.
* gdb.arch/powerpc-prologue-frame.exp: Likewise.
Maciej W. Rozycki [Wed, 31 Jan 2018 14:47:12 +0000 (14:47 +0000)]
LD/testsuite: Fix a typo s/scrip/script/ in `note-3.so' build test name
ld/
* testsuite/ld-elf/shared.exp: Fix a typo s/scrip/script/.
Maciej W. Rozycki [Wed, 31 Jan 2018 14:47:12 +0000 (14:47 +0000)]
MIPS/LD/testsuite: Correct dynamic links with VR4100, VR4300 and VR5000
Correct LD test suite failures with VR4100, VR4300 and VR5000 bare metal
MIPS/ELF targets which do not default to linking with shared libraries,
which leads to link failures like:
.../ld/ld-new: cannot find -lcomm-data
FAIL: Common symbol override test
or:
.../ld/ld-new: attempted static link of dynamic object `tmpdir/pr14170.so'
FAIL: PR ld/14170
removing:
FAIL: Build pr22471b.so
FAIL: Build pr22471
FAIL: Build pr22649-2b.so
FAIL: Build pr22649-2d.so
FAIL: Build pr22150
FAIL: PR ld/14170
FAIL: --gc-sections with __gxx_personality
test failures.
ld/
* testsuite/ld-elf/comm-data.exp: Pass `-call_shared' to links
involving a shared library for `mips*vr4100*-*-elf*',
`mips*vr4300*-*-elf*' and `mips*vr5000*-*-elf*' targets.
* testsuite/ld-elf/provide-hidden.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-mips-elf/comm-data.exp: Likewise.
Maciej W. Rozycki [Wed, 31 Jan 2018 14:47:12 +0000 (14:47 +0000)]
LD/testsuite: Move ELF shared library tests from elf.exp to shared.exp
Move those ELF shared library tests that are in ld-elf/elf.exp over to
ld-elf/shared.exp, to keep them all together and make the maintenance of
extra flags needed with some targets and shared library builds easier,
and also removing the need for the large:
if { [check_shared_lib_support] } then {
[...]
}
conditional block and consequently reducing indentation, which always
helps with TCL code. No functional change, except for the order of
individual test case execution which has changed accordingly, i.e. the
test results are shuffled.
ld/
* testsuite/ld-elf/elf.exp: Move shared library tests over to...
* testsuite/ld-elf/shared.exp: ... here.
Pedro Alves [Wed, 31 Jan 2018 13:50:34 +0000 (13:50 +0000)]
gdb: Fix remote-sim/MinGW/Darwin builds
(Add missing ChangeLog entry)
The recent commit
e671cd59 ("Per-inferior target_terminal state, fix
PR gdb/13211, more") missed adjusting a few targets to the new
target_ops->to_interrupt interface, breaking the build for those
targets. This fixes it.
Note: remote-sim doesn't really support async execution, so I don't
think gdbsim_interrupt is ever reached via target_interrupt. (It is
reached via gdbsim_cntrl_c though).
The inflow.c changes are a bit ugly, but they're just doing what other
parts of the file already do to handle the same missing functions.
Targets that don't have 'kill', like mingw have their own
target_ops->to_interrupt implementation, so it's fine to make
child_interrupt be a nop.
gdb/ChangeLog:
2018-01-31 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_interrupt): Remove ptid_t parameter.
* inflow.c (child_terminal_save_inferior): Wrap reference to
tcgetpgrp in HAVE_TERMIOS_H.
(child_interrupt, child_pass_ctrlc): Wrap references to signal in
_WIN32.
* remote-sim.c (gdbsim_interrupt): Remove ptid_t parameter and
always iterate over all inferiors.
(gdbsim_cntrl_c): Adjust.
* windows-nat.c (windows_interrupt): Remove 'ptid_t' parameter.
Pedro Alves [Wed, 31 Jan 2018 13:45:06 +0000 (13:45 +0000)]
gdb: Fix remote-sim/MinGW/Darwin builds
The recent commit
e671cd59 ("Per-inferior target_terminal state, fix
PR gdb/13211, more") missed adjusting a few targets to the new
target_ops->to_interrupt interface, breaking the build for those
targets. This fixes it.
Note: remote-sim doesn't really support async execution, so I don't
think gdbsim_interrupt is ever reached via target_interrupt. (It is
reached via gdbsim_cntrl_c though).
The inflow.c changes are a bit ugly, but they're just doing what other
parts of the file already do to handle the same missing functions.
Targets that don't have 'kill', like mingw have their own
target_ops->to_interrupt implementation, so it's fine to make
child_interrupt be a nop.
gdb/ChangeLog:
2018-01-31 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_interrupt): Remove ptid_t parameter.
* inflow.c (child_terminal_save_inferior): Wrap reference to
tcgetpgrp in HAVE_TERMIOS_H.
(child_interrupt, child_pass_ctrlc): Wrap references to signal in
_WIN32.
* remote-sim.c (gdbsim_interrupt): Remove ptid_t parameter and
always iterate over all inferiors.
(gdbsim_cntrl_c): Adjust.
* windows-nat.c (windows_interrupt): Remove 'ptid_t' parameter.
Michael Matz [Wed, 31 Jan 2018 13:26:46 +0000 (14:26 +0100)]
bfd_elf_define_start_stop: Fix check
We really need to check for a dynamic def, not only a ref.
See added testcase.
bfd/
* elflink.c (bfd_elf_define_start_stop): Fix check of
def_dynamic.
ld/
* testsuite/ld-elf/pr21964-5.c: New test.
* testsuite/ld-elf/shared.exp: Run it.
H.J. Lu [Wed, 31 Jan 2018 13:10:40 +0000 (05:10 -0800)]
Check if __start/__stop symbols are referenced by shared objects
Define __start/__stop symbols if they are referenced by shared objects,
not if they are also defined in shared objects.
bfd/
PR ld/21964
* elflink.c (bfd_elf_define_start_stop): Check if __start and
__stop symbols are referenced by shared objects.
ld/
PR ld/21964
* testsuite/ld-elf/pr21964-4.c: New file.
* testsuite/ld-elf/shared.exp: Run pr21964-4 test on Linux.
Xavier Roirand [Fri, 26 Jan 2018 10:13:11 +0000 (11:13 +0100)]
(Ada) Add gdb-mi support for stopping at start of exception handler.
Following my previous commit which add support for stopping at start of
exception handler, this commit adds required gdb-mi support for this
feature.
gdb/ChangeLog:
* mi/mi-cmd-catch.c (mi_cmd_catch_handlers): New function.
* mi/mi-cmds.c (mi_cmds): Add catch-handlers command.
* mi/mi-cmds.h (mi_cmd_catch_handlers): Add external declaration.
* NEWS: Document "-catch-handlers" command.
gdb/doc/ChangeLog:
* gdb.texinfo (Ada Exception gdb/mi Catchpoints): Add
documentation for new "-catch-handlers" command.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_catch_ex_hand.exp: New testcase.
* gdb.ada/mi_catch_ex_hand/foo.adb: New file.
Tested on x86_64-linux.
Xavier Roirand [Thu, 25 Jan 2018 10:09:23 +0000 (11:09 +0100)]
(Ada) C++fy conditional string when catching exception.
This commit C++fy the conditional string used when catching Ada exception.
gdb/ChangeLog:
* ada-lang.c (catch_ada_exception_command_split)
(create_ada_exception_catchpoint) <cond_string>: Change parameter
type. Update code accordingly.
(catch_ada_exception_command, catch_ada_handlers_command): Use
C++ string instead of char* for conditional var.
(catch_ada_assert_command_split) <cond_string>: Change parameter
type. Update code accordingly.
(catch_assert_command): Use C++ string instead of char* for
conditional var.
* ada-lang.h (create_ada_exception_catchpoint) <cond_string>:
Update declaration.
* mi/mi-cmd-catch.c (mi_cmd_catch_assert, mi_cmd_catch_exception):
Use std::string instead of char* for condition string.
Tested on x86_64-linux.
Xavier Roirand [Mon, 29 Jan 2018 12:31:58 +0000 (13:31 +0100)]
(Ada/MI) Add testcase for mi catch assert with condition
gdb/testsuite/ChangeLog:
* gdb.ada/mi_catch_assert.exp: New testcase.
* gdb.ada/mi_catch_assert/bla.adb: New file.
* gdb.ada/mi_catch_assert/pck.ads: New file.
Tested on x86_64-linux.
Xavier Roirand [Mon, 29 Jan 2018 09:43:21 +0000 (10:43 +0100)]
(Ada) Add testcase for catch assert with condition
gdb/testsuite/ChangeLog:
* gdb.ada/catch_assert_if.exp: New testcase.
* gdb.ada/catch_assert_if/bla.adb: New file.
* gdb.ada/catch_assert_if/pck.ads: New file.
Tested on x86_64-linux.
Joel Brobecker [Wed, 31 Jan 2018 07:18:56 +0000 (02:18 -0500)]
internal-error using '@' (repeat) operator on array of dynamic objects
Using the following Ada declarations (the same as in
gdb.ada/dyn_stride.exp)...
subtype Small_Type is Integer range L .. U;
type Record_Type (I : Small_Type := L) is record
S : String (1 .. I);
end record;
type Array_Type is array (Integer range <>) of Record_Type;
A1 : Array_Type :=
(1 => (I => U, S => (others => ASCII.NUL)),
2 => (I => 1, S => "A"),
3 => (I => 2, S => "AB"));
... where "L" and "U" are variables, trying to apply the repeat
operator to "A1(1)" yields to an internal error:
| (gdb) print a1(1)@3
| $5 = /[...]/gdbtypes.c:4883: internal-error: type* copy_type(const type*):
| Assertion `TYPE_OBJFILE_OWNED (type)' failed.
What happens first is that the ada-lang module evaluated the "A1(1)"
sub-expression returning a structure where "I" (one of the fields
in that structure) has a type which is dynamic, because it is
a range type whose bounds are not statically known.
Next, we apply the repeat ('@') operator, which is done via
allocate_repeat_value, which creates an array type with the correct
bounds to associate to our value, by calling lookup_array_range_type:
| struct type *
| lookup_array_range_type (struct type *element_type,
| LONGEST low_bound, LONGEST high_bound)
| {
| struct gdbarch *gdbarch = get_type_arch (element_type);
| struct type *index_type = builtin_type (gdbarch)->builtin_int;
| struct type *range_type
| = create_static_range_type (NULL, index_type, low_bound, high_bound);
|
| return create_array_type (NULL, element_type, range_type);
| }
As we can see, this creates an array type whose index type is
always owned by the gdbarch. This is where the problem lies.
Next, we use that type to construct a struct value. That value
then gets passed to the valprint module, which then checks
whether our object is dynamic or not. And because field "I" above
had a dynamic range type, we end up determining by association
that the artificial repeat array itself is also dynamic. So
we attempt to resolve the type, which leads to trying to copying
that type. And because the artifical array created by
lookup_array_range_type has an index which is not objfile-owned,
we trip the assertion.
This patch fixes the issue by enhancing lookup_array_range_type
to create an index type which has the same owner as the element
type.
gdb/ChangeLog:
* gdbtypes.c (lookup_array_range_type): Make sure the array's
index type is objfile-owned if the element type is as well.
gdb/testsuite/ChangeLog:
* testsuite/gdb.ada/dyn_stride.exp: Add "print a1(1)@3" test.
Alan Modra [Wed, 31 Jan 2018 03:04:18 +0000 (13:34 +1030)]
PR22714, Assembler preprocessor loses track of \@
The PR22714 testcase is such that the input buffer processed by
do_scrub_chars ends on this line
1: bug "Returning to usermode but unexpected PSR bits set?", \@
right at the backslash. (The line is part of a macro definition.)
The next input buffer then starts with '@' which starts a comment on
ARM, and the check for \@ fails due to to == tostart. Now it would be
possible to simply access to[-1] in this particular case, but that's
ugly, and to be absolutely safe from people deliberately trying to
crash gas we'd need the read.c:read_a_source_file buffer passed to
do_scrub_chars to have a single byte pad at the start.
PR 22714
* app.c (last_char): New static var.
(struct app_save): Add last_char field.
(app_push, app_pop): Handle it.
(do_scrub_chars): Use last_char in test for "\@". Set last_char.
Joel Brobecker [Wed, 31 Jan 2018 03:08:07 +0000 (07:08 +0400)]
Document the GDB 8.1 release in gdb/ChangeLog
gdb/ChangeLog:
GDB 8.1 released.
GDB Administrator [Wed, 31 Jan 2018 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in
Nick Clifton [Tue, 30 Jan 2018 17:48:24 +0000 (17:48 +0000)]
Improve junk file removal in source tarball creation script.
* src-release.sh (do_proto_toplev): Add patterns for more junk files
to delete before creating the tarball.
Nick Clifton [Tue, 30 Jan 2018 17:22:41 +0000 (17:22 +0000)]
Update description of nm's symbol bss type letters.
PR 22734
* doc/binutils.texi (nm): Update description to point out that
zero-initialized values can also be shown as type B, b, S or s
since they can be stored in the BSS section.
Philipp Rudo [Tue, 30 Jan 2018 16:10:08 +0000 (17:10 +0100)]
s390: Fix gdb.base/all-architectures.exp with --enable-targets=all
With
7042632bf79 (s390: Hook s390 into OSABI mechanism) assigning a
default target description was moved from s390_gdbarch_init to
s390_linux_init_abi_*. This causes problems when GDB is built with
--enable-targets=all and the user sets an unsupported OSABI, e.g. "set
osabi AIX". In this case there is no valid tdesc, and GDB crashes with an
internal error. Fix this by reverting parts of
7042632bf79.
gdb/ChangeLog:
* s390-linux-tdep.c: Remove includes "features/s390-linux32.c" and
"features/s390x-linux64.c".
(_initialize_s390_linux_tdep): Remove initialization of tdescs
s390_linux32 and s390x_linux64.
(s390_linux_init_abi_31, s390_linux_init_abi_64): Don't set
default tdesc.
* s390-tdep.c: Include "features/s390-linux32.c" and
"features/s390x-linux64.c".
(s390_tdesc_valid): Add check for tdesc_has_registers.
(s390_gdbarch_init): Make sure there is always a valid tdesc.
(_initialize_s390_tdep): Initialize tdesc_s390_linux32 and
tdesc_s390x_linux64.
* s390-linux-tdep.h: Move export of tdesc_s390_linux32 and
tdesc_s390x_linux64 to...
* s390-tdep.h: ...here.
Pedro Alves [Tue, 30 Jan 2018 14:23:51 +0000 (14:23 +0000)]
Per-inferior target_terminal state, fix PR gdb/13211, more
In my multi-target branch I ran into problems with GDB's terminal
handling that exist in master as well, with multi-inferior debugging.
This patch adds a testcase for said problems
(gdb.multi/multi-term-settings.exp), fixes the problems, fixes PR
gdb/13211 as well (and adds a testcase for that too,
gdb.base/interrupt-daemon.exp).
The basis of the problem I ran into is the following. Consider a
scenario where you have:
- inferior 1 - started with "attach", process is running on some
other terminal.
- inferior 2 - started with "run", process is sharing gdb's terminal.
In this scenario, when you stop/resume both inferiors, you want GDB to
save/restore the terminal settings of inferior 2, the one that is
sharing GDB's terminal. I.e., you want inferior 2 to "own" the
terminal (in target_terminal::is_ours/target_terminal::is_inferior
sense).
Unfortunately, that's not what you get currently. Because GDB doesn't
know whether an attached inferior is actually sharing GDB's terminal,
it tries to save/restore its settings anyway, ignoring errors. In
this case, this is pointless, because inferior 1 is running on a
different terminal, but GDB doesn't know better.
And then, because it is only possible to have the terminal settings of
a single inferior be in effect at a time, or make one inferior/pgrp be
the terminal's foreground pgrp (aka, only one inferior can "own" the
terminal, ignoring fork children here), if GDB happens to try to
restore the terminal settings of inferior 1 first, then GDB never
restores the terminal settings of inferior 2.
This patch fixes that and a few things more along the way:
- Moves enum target_terminal::terminal_state out of the
target_terminal class (it's currently private) and makes it a
scoped enum so that it can be easily used elsewhere.
- Replaces the inflow.c:terminal_is_ours boolean with a
target_terminal_state variable. This allows distinguishing is_ours
and is_ours_for_output states. This allows finally making
child_terminal_ours_1 do something with its "output_only"
parameter.
- Makes each inferior have its own copy of the
is_ours/is_ours_for_output/is_inferior state.
- Adds a way for GDB to tell whether the inferior is sharing GDB's
terminal. Works best on Linux and Solaris; the fallback works just
as well as currently.
- With that, we can remove the inf->attach_flag tests from
child_terminal_inferior/child_terminal_ours.
- Currently target_ops.to_ours is responsible for both saving the
current inferior's terminal state, and restoring gdb's state.
Because each inferior has its own terminal state (possibly handled
by different targets in a multi-target world, even), we need to
split the inferior-saving part from the gdb-restoring part. The
patch adds a new target_ops.to_save_inferior target method for
that.
- Adds a new target_terminal::save_inferior() function, so that
sequences like:
scoped_restore_terminal_state save_state;
target_terminal::ours_for_output ();
... restore back inferiors that were
target_terminal_state::is_inferior before back to is_inferior, and
leaves inferiors that were is_ours alone.
- Along the way, this adds a default implementation of
target_pass_ctrlc to inflow.c (for inf-child.c), that handles
passing the Ctrl-C to a process running on GDB's terminal or to
some other process otherwise.
- Similarly, adds a new target default implementation of
target_interrupt, for the "interrupt" command. The current
implementation of this hook in inf-ptrace.c kills the whole process
group, but that's incorrect/undesirable because we may not be
attached to all processes in the process group. And also, it's
incorrect because inferior_process_group() doesn't really return
the inferior's real process group id if the inferior is not a
process group leader... This is the cause of PR gdb/13211 [1],
which this patch fixes. While at it, that target method's "ptid"
parameter is eliminated, because it's not really used.
- A new test is included that exercises and fixes PR gdb/13211, and
also fixes a GDB issue reported on stackoverflow that I ran into
while working on this [2]. The problem is similar to PR gdb/13211,
except that it also triggers with Ctrl-C. When debugging a daemon
(i.e., a process that disconnects from the controlling terminal and
is not a process group leader, then Ctrl-C doesn't work, you just
can't interrupt the inferior at all, resulting in a hung debug
session. The problem is that since the inferior is no longer
associated with gdb's session / controlling terminal, then trying
to put the inferior in the foreground fails. And so Ctrl-C never
reaches the inferior directly. pass_signal is only used when the
inferior is attached, but that is not the case here. This is fixed
by the new child_pass_ctrlc. Without the fix, the new
interrupt-daemon.exp testcase fails with timeout waiting for a
SIGINT that never arrives.
[1] PR gdb/13211 - Async / Process group and interrupt not working
https://sourceware.org/bugzilla/show_bug.cgi?id=13211
[2] GDB not reacting Ctrl-C when after fork() and setsid()
https://stackoverflow.com/questions/
46101292/gdb-not-reacting-ctrl-c-when-after-fork-and-setsid
Note this patch does _not_ fix:
- PR gdb/14559 - The 'interrupt' command does not work if sigwait is in use
https://sourceware.org/bugzilla/show_bug.cgi?id=14559
- PR gdb/9425 - When using "sigwait" GDB doesn't trap SIGINT. Ctrl+C terminates program when should break gdb.
https://sourceware.org/bugzilla/show_bug.cgi?id=9425
The only way to fix that that I know of (without changing the kernel)
is to make GDB put inferiors in a separate session (create a
pseudo-tty master/slave pair, make the inferior run with the slave as
its terminal, and have gdb pump output/input on the master end).
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* config.in, configure: Regenerate.
* configure.ac: Check for getpgid.
* go32-nat.c (go32_pass_ctrlc): New.
(go32_target): Install it.
* inf-child.c (inf_child_target): Install
child_terminal_save_inferior, child_pass_ctrlc and
child_interrupt.
* inf-ptrace.c (inf_ptrace_interrupt): Delete.
(inf_ptrace_target): No longer install it.
* infcmd.c (interrupt_target_1): Adjust.
* inferior.h (child_terminal_save_inferior, child_pass_ctrlc)
(child_interrupt): Declare.
(inferior::terminal_state): New.
* inflow.c (struct terminal_info): Update comments.
(inferior_process_group): Delete.
(terminal_is_ours): Delete.
(gdb_tty_state): New.
(child_terminal_init): Adjust.
(is_gdb_terminal, sharing_input_terminal_1)
(sharing_input_terminal): New functions.
(child_terminal_inferior): Adjust. Use sharing_input_terminal.
Set the process's actual process group in the foreground if
possible. Handle is_ours_for_output/is_ours distinction. Don't
mark terminal as the inferior's if not sharing GDB's terminal.
Don't check attach_flag.
(child_terminal_ours_for_output, child_terminal_ours): Adjust to
pass down a target_terminal_state.
(child_terminal_save_inferior): New, factored out from ...
(child_terminal_ours_1): ... this. Handle
target_terminal_state::is_ours_for_output.
(child_interrupt, child_pass_ctrlc): New.
(inflow_inferior_exit): Clear the inferior's terminal_state.
(copy_terminal_info): Copy the inferior's terminal state.
(_initialize_inflow): Remove reference to terminal_is_ours.
* inflow.h (inferior_process_group): Delete.
* nto-procfs.c (nto_handle_sigint, procfs_interrupt): Adjust.
* procfs.c (procfs_target): Don't install procfs_interrupt.
(procfs_interrupt): Delete.
* remote.c (remote_serial_quit_handler): Adjust.
(remote_interrupt): Remove ptid parameter. Adjust.
* target-delegates.c: Regenerate.
* target.c: Include "terminal.h".
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
(target_terminal::init): Adjust.
(target_terminal::inferior): Adjust to per-inferior
terminal_state.
(target_terminal::restore_inferior, target_terminal_is_ours_kind): New.
(target_terminal::ours, target_terminal::ours_for_output): Use
target_terminal_is_ours_kind.
(target_interrupt): Remove ptid parameter. Adjust.
(default_target_pass_ctrlc): Adjust.
* target.h (target_ops::to_terminal_save_inferior): New field.
(target_ops::to_interrupt): Remove ptid_t parameter.
(target_interrupt): Remove ptid_t parameter. Update comment.
(target_pass_ctrlc): Update comment.
* target/target.h (target_terminal_state): New scoped enum,
factored out of ...
(target_terminal::terminal_state): ... here.
(target_terminal::inferior): Update comments.
(target_terminal::restore_inferior): New.
(target_terminal::is_inferior, target_terminal::is_ours)
(target_terminal::is_ours_for_output): Adjust.
(target_terminal::scoped_restore_terminal_state): Adjust to
rename, and call restore_inferior() instead of inferior().
(target_terminal::scoped_restore_terminal_state::m_state): Change
type.
(target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this and change type.
gdb/gdbserver/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* target.c (target_terminal::terminal_state): Rename to ...
(target_terminal::m_terminal_state): ... this.
gdb/testsuite/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
PR gdb/13211
* gdb.base/interrupt-daemon.c: New.
* gdb.base/interrupt-daemon.exp: New.
* gdb.multi/multi-term-settings.c: New.
* gdb.multi/multi-term-settings.exp: New.
Pedro Alves [Tue, 30 Jan 2018 14:23:51 +0000 (14:23 +0000)]
linux-nat: Eliminate custom target_terminal_{inferior,ours}, stop using set_sigint_trap
This patch gets rid of linux-nat.c's custom
target_terminal_inferior/target_terminal_ours implementations.
The only remaining reason those overrides exist is to install
clear_sigint_trap in order to pass Ctrl-C/SIGINT to the inferior
process in case the inferior is not sharing GDB's terminal (and
target_wait was called without TARGET_WNOHANG).
However, I think that's better handled by QUIT / target_pass_ctrlc
nowadays. Going that route avoids the issue with set_sigint_trap only
looking at the current inferior to know whether to override SIGINT or
not, which doesn't really work correctly with multi-inferior in the
picture. Also centralizing on a single SIGINT handler as much as
possible seems better considering a future multi-target world.
Tested on x86-64 GNU/Linux.
gdb/ChangeLog:
2018-01-30 Pedro Alves <palves@redhat.com>
* linux-nat.c (wait_for_signal): New function.
(wait_lwp, linux_nat_wait_1): Use it instead of calling sigsuspend
directly.
(async_terminal_is_ours)
(linux_nat_terminal_inferior, linux_nat_terminal_ours): Delete.
(linux_nat_add_target): Don't override
to_terminal_inferior/to_terminal_ours.
Alan Modra [Tue, 30 Jan 2018 11:41:00 +0000 (22:11 +1030)]
Add --gc-sections test checking removal of __start/__stop symbols.
Well, just __stop__foo but that should be good enough.
* testsuite/ld-gc/stop.d,
* testsuite/ld-gc/stop.s: New test.
* testsuite/ld-gc/gc.exp: Run it.
Alan Modra [Tue, 30 Jan 2018 05:32:32 +0000 (16:02 +1030)]
PR22758, FAIL: Run pr22393-2
We can't map different disk pages into the same memory page; The last
page mapped will simply overwrite any previous pages. The
executable/non-executable new_segment test ignored this fact, leading
to a ld.so segfault on hppa when .dynamic is overwritten with zeros.
This patch moves existing tests for demand paging with lma on the same
memory page, to a new test performed before any case where we want a
new segment due to protection or loadable conflicts.
PR 22758
* elf.c (_bfd_elf_map_sections_to_segments): Don't start a new
segment when demand paged with lma on the same page. Test this
before load/non-load, executable/non-executable,
writable/non-writable tests and simplify. Delete bogus relro
condition in writable/non-writable test. Delete outdated
comment. Formatting.
Joel Brobecker [Tue, 30 Jan 2018 04:03:09 +0000 (23:03 -0500)]
gdb.base/break.exp: fix last "info break" test failure on Ubuntu 16.04
The last test of this testcase fails when run on Ubuntu 16.04 using
the system compiler (16.04):
FAIL: gdb.base/break.exp: verify that they were cleared
This is because the testcase expected that a breakpoint on line 47 of break.c...
printf ("%d\n", factorial (atoi ("6"))); /* set breakpoint 1 here */
... would actually be inserted on an instruction belonging to
that line. However, what actually happens is that system GCC on
that version of Ubuntu ends up inlining everything, including
the call to printf, thus reporting every instruction of generated
for this line of code as belonging to a different function. As
a result, GDB ends up insering the breakpoint on the next line
of code, which is line 49:
(gdb) break break.c:$l
Breakpoint 3 at 0x4005c1: file /[...]/gdb.base/break.c, line 49.
This causes a spurious failure in the "info break" test later on,
as it assumed that the breakpoint above is inserted on line 47:
gdb_test "info break" "$srcfile:$line" "verify that they were cleared"
This patch fixes the issue by saving the actual source location where
the breakpoint was inserted.
gdb/testsuite/ChangeLog:
* gdb.base/break.exp: Save the location where the breakpoint
on break.c:47 was actually inserted when debugging the version
compiled at -O2 and use it in the expected output of the "info
break" test performed soon after.
tested on x86_64-linux, with two configurations:
- Ubuntu 16.04 with the system compiler (breakpoint lands on line 49)
- Ubuntu 16.04 with GCC 7.3.1 (breakpoint lands on line 47)
Maciej W. Rozycki [Tue, 30 Jan 2018 01:31:23 +0000 (01:31 +0000)]
MIPS/LD/testsuite: Correct PR ld/22649 test case failures
Fix commit
d664fd41e15f ("Ignore dynamic references on forced local
symbols") and use alternative test actions and match patterns to
correctly handle messages like:
.../ld/ld-new: Removing unused section '.reginfo' in file 'tmpdir/pr22649-2b.o'
or:
.../ld/ld-new: Removing unused section '.MIPS.options' in file 'tmpdir/pr22649-2b.o'
produced by LD on MIPS targets, removing:
FAIL: Build pr22649-2c.so
FAIL: Build pr22649-2d.so
test suite failures and tightening checks made with `pr22649-2a.so' and
`pr22649-2b.so' test cases.
Keep the original empty action with `pr22649-2c.so' and `pr22649-2d.so'
links and MIPS/ELF targets though, because for them the linker does not
garbage-collect the `.reginfo' section. This is because the section has
its flags set differently by code in GAS in `md_begin':
if (strncmp (TARGET_OS, "elf", 3) != 0)
flags |= SEC_ALLOC | SEC_LOAD;
and consequently BFD linker code in `_bfd_elf_gc_mark_extra_sections':
else if (((isec->flags & SEC_DEBUGGING) != 0
|| (isec->flags & (SEC_ALLOC | SEC_LOAD | SEC_RELOC)) == 0)
&& elf_next_in_group (isec) == NULL)
isec->gc_mark = 1;
marks these sections to be kept due to their SEC_ALLOC, SEC_LOAD and
SEC_RELOC flags all being zero (`.reginfo' sections never have
relocations attached).
ld/
PR ld/22649
* testsuite/ld-elf/pr22649-2ab-mips.msg: New stderr output.
* testsuite/ld-elf/pr22649-2cd-mips.msg: New stderr output.
* testsuite/ld-elf/shared.exp: Use the new outputs with
`mips*-*-*' targets.
Maciej W. Rozycki [Tue, 30 Jan 2018 00:38:12 +0000 (00:38 +0000)]
MIPS/LD/testsuite: Adjust match patterns for special section indexes
Update `readelf' symbol table dump match patterns to handle SHN_MIPS_DATA
and SHN_MIPS_TEXT special section indexes produced by the IRIX ELF format
variation used with a number of MIPS targets and printed by `readelf' as
PRC[0xff02] and PRC[0xff01] respectively, correcting LD test suite
failures:
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: Common symbol override test (auxiliary shared object build)
extra regexps in .../ld/testsuite/ld-elf/pr21703-shared.sd starting with "^ +[0-9]+: +[0-9a-f]+ +4 +FUNC +GLOBAL +DEFAULT +[0-9] +foo@FOO$"
EOF from dump.out
FAIL: PR ld/21703 shared
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
extra regexps in .../ld/testsuite/ld-elf/comm-data1.sd starting with "^ +[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo$"
EOF from dump.out
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared object build)
observed due to file contents like:
7:
5ffe02e8 0 OBJECT GLOBAL DEFAULT PRC[0xff02] foo
shown by `readelf -s' vs:
+[0-9]+: +[0-9a-f]+ +0 +OBJECT +GLOBAL +DEFAULT +[0-9]+ +foo
pattern expected, triggered by widening testing to these targets by commit
05a5feafdd38 ("Rewrite check_shared_lib_support").
ld/
* testsuite/ld-elf/comm-data1.sd: Alternatively accept
`PRC[0xff02]' in place of a regular section index.
* testsuite/ld-elf/pr21703-shared.sd: Likewise `PRC[0xff01]'.
Alan Modra [Mon, 29 Jan 2018 05:18:03 +0000 (15:48 +1030)]
32-bit objcopy build fail
* objcopy.c (merge_gnu_build_notes): Use (bfd_vma) -1 as
"artificially large" end address.
GDB Administrator [Tue, 30 Jan 2018 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Mon, 29 Jan 2018 11:15:09 +0000 (21:45 +1030)]
Make __start/__stop symbols dynamic and add testcase
bfd/
* elflink.c (bfd_elf_define_start_stop): Make __start and __stop
symbols dynamic.
ld/
* testsuite/ld-elf/pr21964-3a.c: New file.
* testsuite/ld-elf/pr21964-3c.c: New file.
* testsuite/ld-elf/shared.exp: Run new __start/__stop testcase.
Eric Botcazou [Mon, 29 Jan 2018 23:21:57 +0000 (00:21 +0100)]
Adjust test for PR ld/22269.
On the SPARC architecture, you need to pass a special flag to GNU as
when you're assembling PIC/PIE code or else you get a wrong relocation
for the GOT symbol.
ld/
* testsuite/ld-elf/shared.exp (AFLAGS_PIC): Define on SPARC.
(pr22269-1): Pass AFLAGS_PIC to the assembler.
Eric Botcazou [Mon, 29 Jan 2018 23:13:51 +0000 (00:13 +0100)]
Fix PR gas/22738 (.dc.a directive has wrong size on SPARC 64-bit).
The .dc.a directive has wrong size (32 bits) on SPARC 64-bit because
the assembler sets the correct BFD architecture only at the very end
of the processing and it's too late for the directive. It's fixed by
defining TARGET_MACH and making it return a sensible default value.
gas/
* config/tc-sparc.h (sparc_mach): Declare.
(TARGET_MACH): Define to above.
* config/tc-sparc.c (sparc_mach): New function.
(sparc_md_end): Minor tweak.
ld/
* testsuite/ld-elf/pr22450.d: Remove reference to SPARC64.
Maciej W. Rozycki [Mon, 29 Jan 2018 20:10:19 +0000 (12:10 -0800)]
MIPS/LD/testsuite: Correct comm-data.exp test ABI/emul/endian arrangement
Update the ld-mips-elf/comm-data.exp test script to correctly select
emulations for targets using non-traditional MIPS emulation and also
correctly select ABIs for targets that do not support all of them, and
finally use the default endianness selection to benefit targets which
support only one, complementing commit
05a5feafdd38 ("Rewrite
check_shared_lib_support") and removing numerous test failures such as:
FAIL: MIPS o32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS o32/copyreloc common symbol override test
FAIL: MIPS o32/nocopyreloc common symbol override test (auxiliary shared objectbuild)
FAIL: MIPS o32/nocopyreloc common symbol override test
FAIL: MIPS n32/copyreloc common symbol override test (auxiliary shared object build)
FAIL: MIPS n32/copyreloc common symbol override test
FAIL: MIPS n32/nocopyreloc common symbol override test (auxiliary shared objectbuild)
FAIL: MIPS n32/nocopyreloc common symbol override test
due to:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf64btsmip elf64ltsmip
or:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf32ebmip
or:
.../ld/ld-new: unrecognised emulation mode: elf32btsmip
Supported emulations: elf32l4300
etc., and:
ERROR: -n32 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n32/copyreloc common symbol override test (auxiliary shared object build)
ERROR: -n32 -march=mips3 -EB -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s: assembly failed
UNRESOLVED: MIPS n32/copyreloc common symbol override test
ERROR: -n32 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n32/nocopyreloc common symbol override test (auxiliary shared object build)
ERROR: -n32 -march=mips3 -EB -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s: assembly failed
UNRESOLVED: MIPS n32/nocopyreloc common symbol override test
due to:
Assembler messages:
Fatal error: selected target format 'elf32-nbigmips' unknown
and:
ERROR: -64 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n64/copyreloc common symbol override test (auxiliary shared object build)
ERROR: -64 -march=mips3 -EB --defsym ELF64=1 -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s:assembly failed
UNRESOLVED: MIPS n64/copyreloc common symbol override test
ERROR: -64 -march=mips3 -EB -call_shared .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data1.s: assembly failed
UNRESOLVED: MIPS n64/nocopyreloc common symbol override test (auxiliary shared object build)
ERROR: -64 -march=mips3 -EB --defsym ELF64=1 -call_nonpic .../ld/testsuite/ld-mips-elf/../ld-elf/comm-data2.s:assembly failed
UNRESOLVED: MIPS n64/nocopyreloc common symbol override test
due to:
Assembler messages:
Fatal error: no compiled in support for 64 bit object file format
ld/
* testsuite/ld-mips-elf/comm-data.exp: Correct support for
targets using non-traditional MIPS emulation or having a limited
selection of ABIs available. Don't force big endianness, use
defaults.
Sergio Durigan Junior [Mon, 29 Jan 2018 17:29:21 +0000 (12:29 -0500)]
Don't call "detach_inferior" on "remote_follow_fork"
This patch fixes a regression that has been introduced by:
commit
bc09b0c14fb713a9aec25e09b78499f3bc2441b5
Date: Fri Jan 19 11:48:11 2018 -0500
Make linux_nat_detach/thread_db_detach use the inferior parameter
It is possible to trigger this failure with gdb.base/foll-fork.exp (in
which case a bunch of ERROR's will be printed), but one can also use
the test below.
Consider the following example program:
#include <unistd.h>
int
main (int argc, char *argv[])
{
fork ();
return 0;
}
When running it under gdbserver:
# ./gdb/gdbserver/gdbserver --multi --once :2345
And debugging it under GDB, we see a segmentation fault:
# ./gdb/gdb -q -batch -ex 'set remote exec-file ./a.out' -ex 'tar extended-remote :2345' -ex r ./a.out
Starting program:
...
[Detaching after fork from child process 16102.]
Segmentation fault (core dumped)
The problem happens on inferior.c:detach_inferior:
void
detach_inferior (inferior *inf)
{
/* Save the pid, since exit_inferior_1 will reset it. */
int pid = inf->pid;
^^^^^^^^^
exit_inferior_1 (inf, 0);
if (print_inferior_events)
printf_unfiltered (_("[Inferior %d detached]\n"), pid);
}
When this code is called from remote.c:remote_follow_fork, the PID is
valid but there is no 'inferior' associated with it, which means that
'inf == NULL'.
The proper fix here is to not call "detach_inferior" when doing remote
follow-fork, because we don't have an inferior to detach on the host
side.
Before
bc09b0c1, that call was already a nop (exit_inferior_1 bails
out early if you pass it a NULL inferior), except that it printed
"Inferior PID detached" when "set print inferior-events" is on. Since
native debugging doesn't call detach_inferior in this case, removing
the call from remote aligns remote debugging output with native
debugging output further.
This has been regtested using BuildBot and no regressions were found.
gdb/ChangeLog:
2018-01-29 Sergio Durigan Junior <sergiodj@redhat.com>
* remote.c (remote_follow_fork): Don't call "detach_inferior".
Nick Clifton [Mon, 29 Jan 2018 13:51:47 +0000 (13:51 +0000)]
Update Russian translation for the gas sub-directory
Nick Clifton [Mon, 29 Jan 2018 13:19:02 +0000 (13:19 +0000)]
Prevent patch remnants from being included in release tarballs.
* src-release.sh (do_proto_toplev): Strip patch remnant files from
the sources before creating the tarball.
H.J. Lu [Mon, 29 Jan 2018 12:54:57 +0000 (04:54 -0800)]
ld: Skip unsupported static executable tests
Skip static executable tests if static executable is unsupported.
Tested on Linux/x86 without libc.a.
PR ld/22732
* testsuite/config/default.exp (STATIC_LDFLAGS): New. Set to
"-static" if target compiler supports it.
* testsuite/ld-bootstrap/bootstrap.exp: Skip static executable
tests if target compiler doesn't support it.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Likewise.
(run_cc_link_tests): Likewise.
Alan Modra [Fri, 26 Jan 2018 21:49:33 +0000 (08:19 +1030)]
PR22741, objcopy segfault on fuzzed COFF object
PR 22741
* coffgen.c (coff_pointerize_aux): Ensure auxent tagndx is in
range before converting to a symbol table pointer.
GDB Administrator [Mon, 29 Jan 2018 00:00:28 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Sun, 28 Jan 2018 17:07:30 +0000 (12:07 -0500)]
Remove dwarf2_per_objfile_free and use after free of dwarf2_per_objfile
I got some crashes while doing some work with dwarf2_per_objfile. It
turns out that dwarf2_per_objfile_free is using the dwarf2_per_objfile
objects after their destructor has ran.
The easiest way to reproduce this is to run the inferior twice (do
"start" twice). Currently, it goes unnoticed, but when I tried to
change all_comp_units and all_type_units to std::vectors, things started
crashing.
The dwarf2_per_objfile objects get destroyed here:
#0 dwarf2_per_objfile::~dwarf2_per_objfile (this=0x35afe70, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/dwarf2read.c:2422
#1 0x0000000000833282 in dwarf2_free_objfile (objfile=0x356cff0) at /home/emaisin/src/binutils-gdb/gdb/dwarf2read.c:25363
#2 0x0000000000699255 in elf_symfile_finish (objfile=0x356cff0) at /home/emaisin/src/binutils-gdb/gdb/elfread.c:1309
#3 0x0000000000911ed3 in objfile::~objfile (this=0x356cff0, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/objfiles.c:674
and just after that the dwarf2read per-objfile registry cleanup function
gets called:
#0 dwarf2_per_objfile_free (objfile=0x356cff0, d=0x35afe70) at /home/emaisin/src/binutils-gdb/gdb/dwarf2read.c:25667
... registry boilerplate ...
#4 0x00000000009103ea in objfile_free_data (container=0x356cff0) at /home/emaisin/src/binutils-gdb/gdb/objfiles.c:61
#5 0x0000000000911ee2 in objfile::~objfile (this=0x356cff0, __in_chrg=<optimized out>) at /home/emaisin/src/binutils-gdb/gdb/objfiles.c:678
In dwarf2_per_objfile_free, we access fields of the dwarf2_per_objfile
object, which is invalid since its destructor has been executed.
This patch moves the content of dwarf2_per_objfile_free to the
destructor of dwarf2_per_objfile. The call to
register_objfile_data_with_cleanup in _initialize_dwarf2_read can be
changed to the simpler register_objfile_data.
gdb/ChangeLog:
* dwarf2read.c (free_dwo_files): Add forward-declaration.
(dwarf2_per_objfile::~dwarf2_per_objfile): Move content from
dwarf2_per_objfile_free here.
(dwarf2_per_objfile_free): Remove.
(_initialize_dwarf2_read): Don't register
dwarf2_per_objfile_free as a registry cleanup.
Nick Clifton [Sun, 28 Jan 2018 16:35:37 +0000 (16:35 +0000)]
Update release notes with a reminder to check the gpg key being used.
* README-how-to-make-a-release: Add note about checking gpg key
and the results of gnupload.
H.J. Lu [Sun, 28 Jan 2018 00:04:34 +0000 (16:04 -0800)]
Add a testcase for PR ld/22751
Since dummy.o must be placed before
-Wl,--whole-archive tmpdir/pr22751.a -Wl,--no-whole-archive
to trigger the bug, this patch adds an optional trailing ld options to
run_ld_link_exec_tests.
PR ld/22751
* testsuite/config/default.exp (INT128_CFLAGS): New.
* testsuite/ld-plugin/lto.exp (INT128_CFLAGS): New.
Run ld/22751 tests.
* testsuite/ld-plugin/pr22751.c: New file.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Add
ld trailing options.
GDB Administrator [Sun, 28 Jan 2018 00:00:32 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Sat, 27 Jan 2018 21:33:26 +0000 (08:03 +1030)]
PR22751, LTO broken for libgcc libcalls
So what was happening was that the file added from libgcc.a during the
rescan was not put on file_chain. map_input_to_output_sections then
doesn't see the file and its sections are treated as discarded.
The file_chain list pointer bug was caused by that fact that an
archive element claimed by the plugin does not have my_archive set.
Or more correctly, the actual archive element does have my_archive
set, but this bfd is replaced with a dummy bfd that doesn't have
my_archive set.
PR 22751
* ldlang.c (find_rescan_insertion): Look past bfds with claim_archive
set.
Nick Clifton [Sat, 27 Jan 2018 16:37:24 +0000 (16:37 +0000)]
Update documentation on making a release
Eli Zaretskii [Sat, 27 Jan 2018 16:34:46 +0000 (18:34 +0200)]
Avoid compilation errors in MinGW native builds of GDB
The error is triggered by including python-internal.h, and the
error message is:
In file included from d:\usr\lib\gcc\mingw32\6.3.0\include\c++\math.h:36:0,
from build-gnulib/import/math.h:27,
from d:/usr/Python26/include/pyport.h:235,
from d:/usr/Python26/include/Python.h:58,
from python/python-internal.h:94,
from python/py-arch.c:24:
d:\usr\lib\gcc\mingw32\6.3.0\include\c++\cmath:1157:11: error: '::hypot' has not been declared
using ::hypot;
^~~~~
This happens because Python headers define 'hypot' to expand to
'_hypot' in the Windows builds.
gdb/ChangeLog:
2018-01-27 Eli Zaretskii <eliz@gnu.org>
* python/python-internal.h (_hypot) [__MINGW32__]: Define back to
'hypoth'. This avoids a compilation error.
Eli Zaretskii [Sat, 27 Jan 2018 16:25:06 +0000 (18:25 +0200)]
Avoid compilation warning in libiberty/simple-object-xcoff.c
gdb/ChangeLog:
2018-01-27 Eli Zaretskii <eliz@gnu.org>
* simple-object-xcoff.c (simple_object_xcoff_find_sections): Avoid
compilation warning in 32-bit builds not supported by
AC_SYS_LARGEFILE.
Nick Clifton [Sat, 27 Jan 2018 14:25:50 +0000 (14:25 +0000)]
Updated Russian translation for the bfd sub-directory
GDB Administrator [Sat, 27 Jan 2018 00:01:04 +0000 (00:01 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Fri, 26 Jan 2018 23:05:06 +0000 (23:05 +0000)]
MIPS/LD: Correct `mips-*-windiss' target emulation configuration
Fix an issue with commit
73934d319dae ("Disable .gnu.hash on MIPS
targets"), <https://sourceware.org/ml/binutils/2006-07/msg00341.html>,
which in turn caused a regression with commit
861fb55ab50a ("Defer
allocation of R_MIPS_REL32 GOT slots"),
<https://sourceware.org/ml/binutils/2008-08/msg00096.html>, and use
`mipself.em' as the extra emulation file for `mips-*-windiss' targets,
removing a segmentation fault triggered as `_bfd_mips_elf_final_link'
calls `htab_traverse' to process LA25 stubs with `htab->la25_stubs'
being NULL. This is in turn due to `_bfd_mips_elf_init_stubs' not
having been called, which is only done by `mipself.em'. No LA25 stubs
are supposed to be produced for `mips-*-windiss' targets, however the
internal data structures have to be initialized.
ld/
* emulparams/elf32mipswindiss.sh (EXTRA_EM_FILE): Set to
`mipself'.
Maciej W. Rozycki [Fri, 26 Jan 2018 23:05:05 +0000 (23:05 +0000)]
MIPS/GAS: Correct `mips-*-windiss' target emulation configuration
Fix a commit
0a44bf6950b3 ("mips-vxworks support"),
<https://sourceware.org/ml/binutils/2006-03/msg00179.html>, regression
and override the choice of the `vxworks' target environment introduced
with commit
ea3eed15006f ("Add generic vxworks GAS target."),
<https://sourceware.org/ml/binutils/2005-01/msg00052.html>, for
`mips-*-windiss' targets as they have not been converted to the VxWorks
target format introduced with the former commit, removing a GAS target
format selection failure:
Assembler messages:
Fatal error: selected target format 'elf32-bigmips-vxworks' unknown
on any assembly attempt with `mips-windiss' and equivalent target
configurations.
gas/
* configure.tgt: Use generic emulation for `mips-*-windiss',
overriding the blanket choice made for `*-*-windiss'.
Maciej W. Rozycki [Fri, 26 Jan 2018 23:05:05 +0000 (23:05 +0000)]
MIPS/GAS: Correct `mips-*-sysv4*' target emulation configuration
Use `mips-*-sysv4*' rather than `mips-*-sysv4*MP*' to match the system
type for System V Release 4 MIPS targets, removing a GAS target
selection failure:
Assembler messages:
Fatal error: selected target format 'elf32-bigmips' unknown
on any assembly attempt with `mips-sysv4' and equivalent target
configurations. These would typically be called `mips-sni-sysv4'
(Sinix) vs `mips-dde-sysv4.2MP' (Supermax).
This corrects commit
8614eeee67f9 ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, making GAS
target selection match commit
dd745cfae548 ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, and commit
3548145dcbf6 ("Traditional MIPS patches"),
<https://sourceware.org/ml/binutils/2000-07/msg00018.html>, which added
support for these targets to BFD and LD respectively.
gas/
* configure.tgt: Use `mips-*-sysv4*' rather than
`mips-*-sysv4*MP*'.
Alan Hayward [Fri, 26 Jan 2018 14:34:52 +0000 (14:34 +0000)]
Add myself as a write-after-approval GDB maintainer.
gdb/
* MAINTAINERS (Write After Approval): Add Alan Hayward.
Alan Hayward [Fri, 26 Jan 2018 14:34:52 +0000 (14:34 +0000)]
Add myself as a write-after-approval GDB maintainer.
gdb/
* MAINTAINERS (Write After Approval): Add Alan Hayward.
Nick Clifton [Fri, 26 Jan 2018 11:14:26 +0000 (11:14 +0000)]
Update notes on making a release
Alan Modra [Wed, 24 Jan 2018 04:52:17 +0000 (15:22 +1030)]
PowerPC PLT stub matching
This patch fixes a number of bugs in ppc32 plt stub matching code.
1) The 4-insn stubs for shared libs and PIEs weren't matched.
2) The executable stub miscalculated PLT entry address (by oring a
sign-extended quantity rather than adding).
3) Comments were not accurate.
In addition, the insn arrays are made const.
* ppc-linux-tdep.c (powerpc32_plt_stub): Make const.
(powerpc32_plt_stub_so_1): Rename from powerpc32_plt_stub_so.
Remove nop. Make const. Comment.
(powerpc32_plt_stub_so_2): New.
(POWERPC32_PLT_CHECK_LEN): Rename from POWERPC32_PLT_STUB_LEN.
Correct count. Update uses.
(ppc_skip_trampoline_code): Match powerpc32_plt_stub_so_2 too.
Move common code reading PLT entry word. Correct
powerpc32_plt_stub PLT address calculation.
* ppc64-tdep.c (ppc64_standard_linkage1): Make const.
(ppc64_standard_linkage2, ppc64_standard_linkage3): Likewise.
(ppc64_standard_linkage4, ppc64_standard_linkage5): Likewise.
(ppc64_standard_linkage6, ppc64_standard_linkage7): Likewise.
(ppc64_standard_linkage8): Likewise.
* rs6000-tdep.c (ppc_insns_match_pattern): Make pattern const.
Correct insns description.
* ppc-tdep.h (ppc_insns_match_pattern): Update prototype.
Reviewed-By: Yao Qi <qiyaoltc@gmail.com>
Alan Modra [Tue, 23 Jan 2018 00:20:02 +0000 (10:50 +1030)]
Define __start/__stop symbols when there is only a dynamic def
This patch fixes a case where a user had a C-representable named
section in both the executable and shared libraries, and of course
wanted the size of the local section in the executable, not the
dynamic section. It does mean that __start and __stop symbols don't
behave exactly like PROVIDEd symbols, but I think that's a reasonable
difference particularly since this is the way they used to behave.
* elflink.c (bfd_elf_define_start_stop): Override symbols when
they are defined dynamically.
Alan Modra [Fri, 26 Jan 2018 01:55:09 +0000 (12:25 +1030)]
PowerPC64 .branch_lt size change leads to "stubs don't match calculated size"
https://bugzilla.redhat.com/show_bug.cgi?id=1523457
I haven't analyzed this myself, I'm relying on Nick's excellent
analysis. What I believe is happening is that after some number of
stub sizing iterations, a long-branch stub needs to be converted to a
plt-branch, but either due to stub alignment or other stubs shrinking
in size, the stub group section size doesn't change.
That means we exit from ppc64_elf_size_stubs after sizing with an
incorrect layout, in fact the additional .branch_lt entry overlays
.got! Since .TOC. is normally set to .got + 0x8000 the stub sizing
code decides that entry is within +/-32k of the TOC pointer and so a
three insn stub is sufficient. When we come to build the stubs using
a correct non-overlaying layout, a four insn plt-branch stub is
generated and the stub group size doesn't match that calculated
earlier.
* elf64-ppc.c (ppc64_elf_size_stubs): Iterate sizing when
.branch_lt changes size.
GDB Administrator [Fri, 26 Jan 2018 00:00:35 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Thu, 25 Jan 2018 11:17:41 +0000 (21:47 +1030)]
PR22746, crash when running 32-bit objdump on corrupted file
Avoid unsigned int overflow by performing bfd_size_type multiplication.
PR 22746
* elfcode.h (elf_object_p): Avoid integer overflow.
Eric Botcazou [Thu, 25 Jan 2018 11:16:06 +0000 (12:16 +0100)]
Fix PR ld/22727 (TLS breakage in PIC/PIE mode on SPARC).
There are actually 2 different bugs:
1. TLS transition is broken in PIE mode.
2. TLS is broken in PIC/PIE mode when the __tls_get_addr symbol
is versioned (as is the case on Linux and Solaris at least).
The 1st bug is fixed by reverting the problematic change for now
(note that the associated test doesn't pass on SPARC because of another
issue so there is no formal regression in the testsuite). The 2nd bug
is fixed by changing the call to _bfd_generic_link_add_one_symbol
on __tls_get_addr into a mere lookup in _bfd_sparc_elf_check_relocs.
bfd/
* elfxx-sparc.c (_bfd_sparc_elf_check_relocs) <R_SPARC_TLS_GD_CALL>:
Do a mere lookup of the __tls_get_addr symbol instead of adding it.
Revert
2017-10-19 H.J. Lu <hongjiu.lu@intel.com>
PR ld/22263
* elfxx-sparc.c (sparc_elf_tls_transition): Replace
bfd_link_pic with !bfd_link_executable, !bfd_link_pic with
bfd_link_executable for TLS check.
(_bfd_sparc_elf_check_relocs): Likewise.
(allocate_dynrelocs): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
ld/
* testsuite/ld-sparc/sparc.exp (32-bit: Helper shared library):
Link with a version script.
(32-bit: TLS -fpie): New test.
(64-bit: Helper shared library): Link with a version script.
(64-bit: TLS -fpie): New test.
(64-bit: GOTDATA relocations): Pass -Av9 to the assembler.
* testsuite/ld-sparc/tlslib.ver: New file.
* testsuite/ld-sparc/tlspie32.dd: Likewise.
* testsuite/ld-sparc/tlspie32.s: Likewise.
* testsuite/ld-sparc/tlspie64.dd: Likewise.
* testsuite/ld-sparc/tlspie64.s: Likewise.
* testsuite/ld-sparc/tlssunbin32.dd: Adjust for versioned symbol.
* testsuite/ld-sparc/tlssunbin32.rd: Likewise.
* testsuite/ld-sparc/tlssunbin32.sd: Likewise.
* testsuite/ld-sparc/tlssunbin64.dd: Likewise.
* testsuite/ld-sparc/tlssunbin64.rd: Likewise.
* testsuite/ld-sparc/tlssunbin64.sd: Likewise.
GDB Administrator [Thu, 25 Jan 2018 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Wed, 24 Jan 2018 17:22:05 +0000 (17:22 +0000)]
Fix GCC PR83906 - [8 Regression] Random FAIL: libstdc++-prettyprinters/80276.cc whatis p4
GCC PR83906 [1] is about a GCC/libstdc++ GDB/Python type printer
testcase failing randomly, as shown by running (in libstdc++'s
testsuite):
make check RUNTESTFLAGS=prettyprinters.exp=80276.cc
in a loop. Sometimes you get this:
FAIL: libstdc++-prettyprinters/80276.cc whatis p4
I.e., this:
type = std::unique_ptr<std::vector<std::unique_ptr<std::list<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >>[]>>[99]>
instead of this:
type = std::unique_ptr<std::vector<std::unique_ptr<std::list<std::string>[]>>[99]>
Jonathan Wakely tracked it on the printer side to this bit in
libstdc++'s type printer:
if self.type_obj == type_obj:
return strip_inline_namespaces(self.name)
This assumes the two types resolve to the same gdb.Type but some times
the comparison unexpectedly fails.
Running the testcase manually under Valgrind finds the problem in GDB:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
==6118== Conditional jump or move depends on uninitialised value(s)
==6118== at 0x4C35CB0: bcmp (vg_replace_strmem.c:1100)
==6118== by 0x6F773A: check_types_equal(type*, type*, VEC_type_equality_entry_d**) (gdbtypes.c:3515)
==6118== by 0x6F7B00: check_types_worklist(VEC_type_equality_entry_d**, bcache*) (gdbtypes.c:3618)
==6118== by 0x6F7C03: types_deeply_equal(type*, type*) (gdbtypes.c:3655)
==6118== by 0x4D5B06: typy_richcompare(_object*, _object*, int) (py-type.c:1007)
==6118== by 0x63D7E6C: PyObject_RichCompare (object.c:961)
==6118== by 0x646EAEC: PyEval_EvalFrameEx (ceval.c:4960)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
==6118== by 0x646DC08: PyEval_EvalFrameEx (ceval.c:4519)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
That "bcmp" call is really a memcmp call in check_types_equal. The
problem is that gdb is memcmp'ing two objects that are equal in value:
(top-gdb) p *TYPE_RANGE_DATA (type1)
$1 = {low = {kind = PROP_CONST, data = {const_val = 0, baton = 0x0}}, high = {kind = PROP_CONST, data = {const_val = 15, baton = 0xf}}, flag_upper_bound_is_count = 0,
flag_bound_evaluated = 0}
(top-gdb) p *TYPE_RANGE_DATA (type2)
$2 = {low = {kind = PROP_CONST, data = {const_val = 0, baton = 0x0}}, high = {kind = PROP_CONST, data = {const_val = 15, baton = 0xf}}, flag_upper_bound_is_count = 0,
flag_bound_evaluated = 0}
but differ in padding. Notice the 4-byte hole:
(top-gdb) ptype /o range_bounds
/* offset | size */ type = struct range_bounds {
/* 0 | 16 */ struct dynamic_prop {
/* 0 | 4 */ dynamic_prop_kind kind;
/* XXX 4-byte hole */
/* 8 | 8 */ union dynamic_prop_data {
/* 8 */ LONGEST const_val;
/* 8 */ void *baton;
/* total size (bytes): 8 */
} data;
which is filled with garbage:
(top-gdb) x /40bx TYPE_RANGE_DATA (type1)
0x2fa7ea0: 0x01 0x00 0x00 0x00 0x43 0x01 0x00 0x00
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0x2fa7ea8: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x2fa7eb0: 0x01 0x00 0x00 0x00 0xfe 0x7f 0x00 0x00
0x2fa7eb8: 0x0f 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x2fa7ec0: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
(top-gdb) x /40bx TYPE_RANGE_DATA (type2)
0x20379b0: 0x01 0x00 0x00 0x00 0xfe 0x7f 0x00 0x00
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0x20379b8: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x20379c0: 0x01 0x00 0x00 0x00 0xfe 0x7f 0x00 0x00
0x20379c8: 0x0f 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x20379d0: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
(top-gdb) p memcmp (TYPE_RANGE_DATA (type1), TYPE_RANGE_DATA (type2), sizeof (*TYPE_RANGE_DATA (type1)))
$3 = -187
In some cases objects of type range_bounds are memset when allocated,
but then their dynamic_prop low/high fields are copied over from some
template dynamic_prop object that wasn't memset. E.g.,
create_static_range_type's low/high locals are left with garbage in
the padding, and then that padding is copied over to the range_bounds
object's low/high fields.
At first, I considered making sure to always memset range_bounds
objects, thinking that maybe type objects are being put in some bcache
instance somewhere. But then I hacked bcache/bcache_full to poison
non-pod types, and made dynamic_prop a non-pod, and GDB still
compiled.
So given that, it seems safest to not assume padding will always be
memset, and instead treat them as regular value types, implementing
(in)equality operators and using those instead of memcmp.
This fixes the random FAILs in GCC's testcase.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83906
gdb/ChangeLog:
2018-01-24 Pedro Alves <palves@redhat.com>
GCC PR libstdc++/83906
* gdbtypes.c (operator==(const dynamic_prop &,
const dynamic_prop &)): New.
(operator==(const range_bounds &, const range_bounds &)): New.
(check_types_equal): Use them instead of memcmp.
* gdbtypes.h (operator==(const dynamic_prop &,
const dynamic_prop &)): Declare.
(operator!=(const dynamic_prop &, const dynamic_prop &)): Declare.
(operator==(const range_bounds &, const range_bounds &)): Declare.
(operator!=(const range_bounds &, const range_bounds &)): Declare.
Renlin Li [Thu, 18 Jan 2018 12:17:55 +0000 (12:17 +0000)]
[LD][AARCH64]Add group relocations to create PC-relative offset.
This is a patch to add linker support for group relocations to create a
16, 32, 48, or 64 bit PC-relative offset inline.
The following relocations are added along with the test cases:
BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G3.
bfd/
2018-01-24 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Add support for
BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G3.
* elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise.
(_bfd_aarch64_elf_resolve_relocation): Likewise.
ld/
2018-01-24 Renlin Li <renlin.li@arm.com>
* testsuite/ld-aarch64/aarch64-elf.exp: Run new testes.
* testsuite/ld-aarch64/emit-relocs-287.s: Fix test case.
* testsuite/ld-aarch64/emit-relocs-287.d: Fix expected output.
* testsuite/ld-aarch64/emit-relocs-287-overflow.s: New.
* testsuite/ld-aarch64/emit-relocs-287-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-288.d: New.
* testsuite/ld-aarch64/emit-relocs-288.s: New.
* testsuite/ld-aarch64/emit-relocs-289.d: New.
* testsuite/ld-aarch64/emit-relocs-289.s: New.
* testsuite/ld-aarch64/emit-relocs-289-overflow.s: New.
* testsuite/ld-aarch64/emit-relocs-289-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-290.d: New.
* testsuite/ld-aarch64/emit-relocs-290.s: New.
* testsuite/ld-aarch64/emit-relocs-291.d: New.
* testsuite/ld-aarch64/emit-relocs-291.s: New.
* testsuite/ld-aarch64/emit-relocs-291-overflow.s: New.
* testsuite/ld-aarch64/emit-relocs-291-overflow.d: New.
* testsuite/ld-aarch64/emit-relocs-292.d: New.
* testsuite/ld-aarch64/emit-relocs-292.s: New.
* testsuite/ld-aarch64/emit-relocs-293.d: New.
* testsuite/ld-aarch64/emit-relocs-293.s: New.
Renlin Li [Thu, 18 Jan 2018 12:08:40 +0000 (12:08 +0000)]
[GAS][AARCH64]Add group relocations to create PC-relative offset.
This is a patch to add the gas support for group relocations to create a
16, 32, 48, or 64 bit PC-relative offset inline.
The following relocations are added along with the test cases:
BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G3.
bfd/
2018-01-24 Renlin Li <renlin.li@arm.com>
* reloc.c: Add BFD_RELOC_AARCH64_MOVW_PREL_G0,
BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1,
BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2,
BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Add entries for
BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G3.
gas/
2018-01-24 Renlin Li <renlin.li@arm.com>
* config/tc-aarch64.c (reloc_table): add entries for
BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC,
BFD_RELOC_AARCH64_MOVW_PREL_G3.
(process_movw_reloc_info): Supports newly added MOVW_PREL relocations.
(md_apply_fix): Likewise
* testsuite/gas/aarch64/prel_g0.s: New.
* testsuite/gas/aarch64/prel_g0.d: New.
* testsuite/gas/aarch64/prel_g0_nc.s: New.
* testsuite/gas/aarch64/prel_g0_nc.d: New.
* testsuite/gas/aarch64/prel_g1.s: New.
* testsuite/gas/aarch64/prel_g1.d: New.
* testsuite/gas/aarch64/prel_g1_nc.s: New.
* testsuite/gas/aarch64/prel_g1_nc.d: New.
* testsuite/gas/aarch64/prel_g2.s: New.
* testsuite/gas/aarch64/prel_g2.d: New.
* testsuite/gas/aarch64/prel_g2_nc.s: New.
* testsuite/gas/aarch64/prel_g2_nc.d: New.
* testsuite/gas/aarch64/prel_g3.s: New.
* testsuite/gas/aarch64/prel_g3.d: New.
GDB Administrator [Wed, 24 Jan 2018 00:00:19 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Tue, 23 Jan 2018 21:18:24 +0000 (21:18 +0000)]
MIPS/GAS: Correct default ABI selection for `mips64*-ps2-elf*'
Correct an issue with the `mips64*-ps2-elf*' target introduced with
commit
e407c74b5b60 ("Support for MIPS R5900 (Sony Playstation 2)"),
<https://sourceware.org/ml/binutils/2012-12/msg00240.html> and make
the n32 ABI the default for GAS, consistently with how BFD and LD
are configured for this target.
gas/
* configure.ac: Also set `mips_default_abi' to N32_ABI for
`mips64*-ps2-elf*'.
* configure: Regenerate.
Maciej W. Rozycki [Tue, 23 Jan 2018 19:01:35 +0000 (19:01 +0000)]
MIPS/GAS: Remove a stale OPTION_COMPAT_ARCH_BASE option marker
Complement commit
23fce1e31156 ("MIPS16 intermix test failure"),
<https://sourceware.org/ml/binutils/2009-01/msg00335.html>, and
remove a stale option marker entry.
gas/
* config/tc-mips.c (options): Remove OPTION_COMPAT_ARCH_BASE
enum value.
Maciej W. Rozycki [Tue, 23 Jan 2018 19:01:34 +0000 (19:01 +0000)]
MIPS/BFD: Update a stale `mips_elf32_section_processing' reference
Update a stale reference to `mips_elf32_section_processing', following a
merge of the function into `_bfd_mips_elf_section_processing' made with
commit
103186c62b99 ("PATCH for MIPS 64-bit ABI suport"),
<https://sourceware.org/ml/binutils/1999-q3/msg00072.html>.
bfd/
* elfxx-mips.c (_bfd_mips_elf_final_link): Update a stale
`mips_elf32_section_processing' comment reference.
Igor Tsimbalist [Tue, 23 Jan 2018 16:56:30 +0000 (19:56 +0300)]
Enable Intel PCONFIG instruction.
Intel has disclosed a set of new instructions for Icelake processor.
The spec is
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
This patch enables Intel PCONFIG instruction.
gas/
* config/tc-i386.c (cpu_arch): Add .pconfig.
* doc/c-i386.texi: Document .pconfig.
* testsuite/gas/i386/i386.exp: Add PCONFIG tests.
* testsuite/gas/i386/pconfig-intel.d: New test.
* testsuite/gas/i386/pconfig.d: Likewise.
* testsuite/gas/i386/pconfig.s: Likewise.
* testsuite/gas/i386/x86-64-pconfig-intel.d: Likewise.
* testsuite/gas/i386/x86-64-pconfig.d: Likewise.
* testsuite/gas/i386/x86-64-pconfig.s: Likewise.
opcodes/
* i386-dis.c (enum): Add pconfig.
* i386-gen.c (cpu_flag_init): Add CPU_PCONFIG_FLAGS.
(cpu_flags): Add CpuPCONFIG.
* i386-opc.h (enum): Add CpuPCONFIG.
(i386_cpu_flags): Add cpupconfig.
* i386-opc.tbl: Add PCONFIG instruction.
* i386-init.h: Regenerate.
* i386-tbl.h: Likewise.
Igor Tsimbalist [Tue, 23 Jan 2018 16:39:05 +0000 (19:39 +0300)]
Enable Intel WBNOINVD instruction.
Intel has disclosed a set of new instructions for Icelake processor.
The spec is
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
This patch enables Intel WBNOINVD instruction.
gas/
* config/tc-i386.c (cpu_arch): Add .wbnoinvd.
* doc/c-i386.texi: Document .wbnoinvd.
* testsuite/gas/i386/i386.exp: Add WBNOINVD tests.
* testsuite/gas/i386/wbnoinvd-intel.d: New test.
* testsuite/gas/i386/wbnoinvd.d: Likewise.
* testsuite/gas/i386/wbnoinvd.s: Likewise.
* testsuite/gas/i386/x86-64-wbnoinvd-intel.d: Likewise.
* testsuite/gas/i386/x86-64-wbnoinvd.d: Likewise.
* testsuite/gas/i386/x86-64-wbnoinvd.s: Likewise.
opcodes/
* i386-dis.c (enum): Add PREFIX_0F09.
* i386-gen.c (cpu_flag_init): Add CPU_WBNOINVD_FLAGS.
(cpu_flags): Add CpuWBNOINVD.
* i386-opc.h (enum): Add CpuWBNOINVD.
(i386_cpu_flags): Add cpuwbnoinvd.
* i386-opc.tbl: Add WBNOINVD instruction.
* i386-init.h: Regenerate.
* i386-tbl.h: Likewise.