Liang He [Thu, 14 Jul 2022 15:31:38 +0000 (23:31 +0800)]
net: dsa: microchip: ksz_common: Fix refcount leak bug
[ Upstream commit
a14bd7475452c51835dd5a0cee4c8fa48dd0b539 ]
In ksz_switch_register(), we should call of_node_put() for the
reference returned by of_get_child_by_name() which has increased
the refcount.
Fixes:
912aae27c6af ("net: dsa: microchip: really look for phy-mode in port nodes")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220714153138.375919-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sascha Hauer [Fri, 1 Jul 2022 11:03:41 +0000 (13:03 +0200)]
mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times
[ Upstream commit
0fddf9ad06fd9f439f137139861556671673e31c ]
06781a5026350 Fixes the calculation of the DEVICE_BUSY_TIMEOUT register
value from busy_timeout_cycles. busy_timeout_cycles is calculated wrong
though: It is calculated based on the maximum page read time, but the
timeout is also used for page write and block erase operations which
require orders of magnitude bigger timeouts.
Fix this by calculating busy_timeout_cycles from the maximum of
tBERS_max and tPROG_max.
This is for now the easiest and most obvious way to fix the driver.
There's room for improvements though: The NAND_OP_WAITRDY_INSTR tells us
the desired timeout for the current operation, so we could program the
timeout dynamically for each operation instead of setting a fixed
timeout. Also we could wire up the interrupt handler to actually detect
and forward timeouts occurred when waiting for the chip being ready.
As a sidenote I verified that the change in
06781a5026350 is really
correct. I wired up the interrupt handler in my tree and measured the
time between starting the operation and the timeout interrupt handler
coming in. The time increases 41us with each step in the timeout
register which corresponds to 4096 clock cycles with the 99MHz clock
that I have.
Fixes:
06781a5026350 ("mtd: rawnand: gpmi: Fix setting busy timeout setting")
Fixes:
b1206122069aa ("mtd: rawniand: gpmi: use core timings instead of an empirical derivation")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Han Xu <han.xu@nxp.com>
Tested-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dario Binacchi [Tue, 18 Jan 2022 09:54:33 +0000 (10:54 +0100)]
mtd: rawnand: gpmi: validate controller clock rate
[ Upstream commit
15e27d197a7ea69b4643791ca2f8467fdd998359 ]
What to do when the real rate of the gpmi clock is not equal to the
required one? The solutions proposed in [1] did not lead to a conclusion
on how to validate the clock rate, so, inspired by the document [2], I
consider the rate correct only if not lower or equal to the rate of the
previous edo mode. In fact, in chapter 4.16.2 (NV-DDR) of the document [2],
it is written that "If the host selects timing mode n, then its clock
period shall be faster than the clock period of timing mode n-1 and
slower than or equal to the clock period of timing mode n.". I thought
that it could therefore also be used in this case, without therefore
having to define the valid rate ranges empirically.
For example, suppose that gpmi_nfc_compute_timings() is called to set
edo mode 5 (100MHz) but the rate returned by clk_round_rate() is 80MHz
(edo mode 4). In this case gpmi_nfc_compute_timings() will return error,
and will be called again to set edo mode 4, which this time will be
successful.
[1] https://lore.kernel.org/r/
20210702065350.209646-5-ebiggers@kernel.org
[2] http://www.onfi.org/-/media/client/onfi/specs/onfi_3_0_gold.pdf?la=en
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220118095434.35081-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biao Huang [Thu, 14 Jul 2022 06:00:14 +0000 (14:00 +0800)]
net: stmmac: fix unbalanced ptp clock issue in suspend/resume flow
[ Upstream commit
f4c7d8948e866918d61493264dbbd67e45ef2bda ]
Current stmmac driver will prepare/enable ptp_ref clock in
stmmac_init_tstamp_counter().
The stmmac_pltfr_noirq_suspend will disable it once in suspend flow.
But in resume flow,
stmmac_pltfr_noirq_resume --> stmmac_init_tstamp_counter
stmmac_resume --> stmmac_hw_setup --> stmmac_init_ptp --> stmmac_init_tstamp_counter
ptp_ref clock reference counter increases twice, which leads to unbalance
ptp clock when resume back.
Move ptp_ref clock prepare/enable out of stmmac_init_tstamp_counter to fix it.
Fixes:
0735e639f129d ("net: stmmac: skip only stmmac_ptp_register when resume from suspend")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biao Huang [Thu, 14 Jul 2022 06:00:13 +0000 (14:00 +0800)]
net: stmmac: fix pm runtime issue in stmmac_dvr_remove()
[ Upstream commit
0d9a15913b871e03fdd3b3d90a2e665fb22f9bcf ]
If netif is running when stmmac_dvr_remove is invoked,
the unregister_netdev will call ndo_stop(stmmac_release) and
vlan_kill_rx_filter(stmmac_vlan_rx_kill_vid).
Currently, stmmac_dvr_remove() will disable pm runtime before
unregister_netdev. When stmmac_vlan_rx_kill_vid is invoked,
pm_runtime_resume_and_get in it returns EACCESS error number,
and reports:
dwmac-mediatek
11021000.ethernet eth0: stmmac_dvr_remove: removing driver
dwmac-mediatek
11021000.ethernet eth0: FPE workqueue stop
dwmac-mediatek
11021000.ethernet eth0: failed to kill vid 0081/0
Move the pm_runtime_disable to the end of stmmac_dvr_remove
to fix this issue.
Fixes:
6449520391dfc ("net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:52:05 +0000 (13:52 -0700)]
tcp: Fix a data-race around sysctl_tcp_probe_interval.
[ Upstream commit
2a85388f1d94a9f8b5a529118a2c5eaa0520d85c ]
While reading sysctl_tcp_probe_interval, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes:
05cbc0db03e8 ("ipv4: Create probe timer for tcp PMTU as per RFC4821")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:52:04 +0000 (13:52 -0700)]
tcp: Fix a data-race around sysctl_tcp_probe_threshold.
[ Upstream commit
92c0aa4175474483d6cf373314343d4e624e882a ]
While reading sysctl_tcp_probe_threshold, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes:
6b58e0a5f32d ("ipv4: Use binary search to choose tcp PMTU probe_size")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:52:03 +0000 (13:52 -0700)]
tcp: Fix a data-race around sysctl_tcp_mtu_probe_floor.
[ Upstream commit
8e92d4423615a5257d0d871fc067aa561f597deb ]
While reading sysctl_tcp_mtu_probe_floor, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes:
c04b79b6cfd7 ("tcp: add new tcp_mtu_probe_floor sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:52:02 +0000 (13:52 -0700)]
tcp: Fix data-races around sysctl_tcp_min_snd_mss.
[ Upstream commit
78eb166cdefcc3221c8c7c1e2d514e91a2eb5014 ]
While reading sysctl_tcp_min_snd_mss, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
5f3e2bf008c2 ("tcp: add tcp_min_snd_mss sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:52:01 +0000 (13:52 -0700)]
tcp: Fix data-races around sysctl_tcp_base_mss.
[ Upstream commit
88d78bc097cd8ebc6541e93316c9d9bf651b13e8 ]
While reading sysctl_tcp_base_mss, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
5d424d5a674f ("[TCP]: MTU probing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:52:00 +0000 (13:52 -0700)]
tcp: Fix data-races around sysctl_tcp_mtu_probing.
[ Upstream commit
f47d00e077e7d61baf69e46dde3210c886360207 ]
While reading sysctl_tcp_mtu_probing, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
5d424d5a674f ("[TCP]: MTU probing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:59 +0000 (13:51 -0700)]
tcp: Fix data-races around sysctl_tcp_l3mdev_accept.
[ Upstream commit
08a75f10679470552a3a443f9aefd1399604d31d ]
While reading sysctl_tcp_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
6dd9a14e92e5 ("net: Allow accepted sockets to be bound to l3mdev domain")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Fri, 13 May 2022 18:55:43 +0000 (11:55 -0700)]
tcp: sk->sk_bound_dev_if once in inet_request_bound_dev_if()
[ Upstream commit
fdb5fd7f736ec7ae9fb36d2842ea6d9ebc4e7269 ]
inet_request_bound_dev_if() reads sk->sk_bound_dev_if twice
while listener socket is not locked.
Another cpu could change this field under us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:58 +0000 (13:51 -0700)]
tcp/dccp: Fix a data-race around sysctl_tcp_fwmark_accept.
[ Upstream commit
1a0008f9df59451d0a17806c1ee1a19857032fa8 ]
While reading sysctl_tcp_fwmark_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes:
84f39b08d786 ("net: support marking accepting TCP sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:57 +0000 (13:51 -0700)]
ip: Fix a data-race around sysctl_fwmark_reflect.
[ Upstream commit
85d0b4dbd74b95cc492b1f4e34497d3f894f5d9a ]
While reading sysctl_fwmark_reflect, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes:
e110861f8609 ("net: add a sysctl to reflect the fwmark on replies")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:56 +0000 (13:51 -0700)]
ip: Fix a data-race around sysctl_ip_autobind_reuse.
[ Upstream commit
0db232765887d9807df8bcb7b6f29b2871539eab ]
While reading sysctl_ip_autobind_reuse, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes:
4b01a9674231 ("tcp: bind(0) remove the SO_REUSEADDR restriction when ephemeral ports are exhausted.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:55 +0000 (13:51 -0700)]
ip: Fix data-races around sysctl_ip_nonlocal_bind.
[ Upstream commit
289d3b21fb0bfc94c4e98f10635bba1824e5f83c ]
While reading sysctl_ip_nonlocal_bind, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:54 +0000 (13:51 -0700)]
ip: Fix data-races around sysctl_ip_fwd_update_priority.
[ Upstream commit
7bf9e18d9a5e99e3c83482973557e9f047b051e7 ]
While reading sysctl_ip_fwd_update_priority, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes:
432e05d32892 ("net: ipv4: Control SKB reprioritization after forwarding")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:53 +0000 (13:51 -0700)]
ip: Fix data-races around sysctl_ip_fwd_use_pmtu.
[ Upstream commit
60c158dc7b1f0558f6cadd5b50d0386da0000d50 ]
While reading sysctl_ip_fwd_use_pmtu, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
f87c10a8aa1e ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:52 +0000 (13:51 -0700)]
ip: Fix data-races around sysctl_ip_no_pmtu_disc.
[ Upstream commit
0968d2a441bf6afb551fd99e60fa65ed67068963 ]
While reading sysctl_ip_no_pmtu_disc, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lennert Buytenhek [Thu, 2 Jun 2022 15:58:11 +0000 (18:58 +0300)]
igc: Reinstate IGC_REMOVED logic and implement it properly
[ Upstream commit
7c1ddcee5311f3315096217881d2dbe47cc683f9 ]
The initially merged version of the igc driver code (via commit
146740f9abc4, "igc: Add support for PF") contained the following
IGC_REMOVED checks in the igc_rd32/wr32() MMIO accessors:
u32 igc_rd32(struct igc_hw *hw, u32 reg)
{
u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
u32 value = 0;
if (IGC_REMOVED(hw_addr))
return ~value;
value = readl(&hw_addr[reg]);
/* reads should not return all F's */
if (!(~value) && (!reg || !(~readl(hw_addr))))
hw->hw_addr = NULL;
return value;
}
And:
#define wr32(reg, val) \
do { \
u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \
if (!IGC_REMOVED(hw_addr)) \
writel((val), &hw_addr[(reg)]); \
} while (0)
E.g. igb has similar checks in its MMIO accessors, and has a similar
macro E1000_REMOVED, which is implemented as follows:
#define E1000_REMOVED(h) unlikely(!(h))
These checks serve to detect and take note of an 0xffffffff MMIO read
return from the device, which can be caused by a PCIe link flap or some
other kind of PCI bus error, and to avoid performing MMIO reads and
writes from that point onwards.
However, the IGC_REMOVED macro was not originally implemented:
#ifndef IGC_REMOVED
#define IGC_REMOVED(a) (0)
#endif /* IGC_REMOVED */
This led to the IGC_REMOVED logic to be removed entirely in a
subsequent commit (commit
3c215fb18e70, "igc: remove IGC_REMOVED
function"), with the rationale that such checks matter only for
virtualization and that igc does not support virtualization -- but a
PCIe device can become detached even without virtualization being in
use, and without proper checks, a PCIe bus error affecting an igc
adapter will lead to various NULL pointer dereferences, as the first
access after the error will set hw->hw_addr to NULL, and subsequent
accesses will blindly dereference this now-NULL pointer.
This patch reinstates the IGC_REMOVED checks in igc_rd32/wr32(), and
implements IGC_REMOVED the way it is done for igb, by checking for the
unlikely() case of hw_addr being NULL. This change prevents the oopses
seen when a PCIe link flap occurs on an igc adapter.
Fixes:
146740f9abc4 ("igc: Add support for PF")
Signed-off-by: Lennert Buytenhek <buytenh@arista.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Neftin [Mon, 9 May 2022 08:52:54 +0000 (11:52 +0300)]
Revert "e1000e: Fix possible HW unit hang after an s0ix exit"
[ Upstream commit
6cfa45361d3eac31ba67d7d0bbef547151450106 ]
This reverts commit
1866aa0d0d6492bc2f8d22d0df49abaccf50cddd.
Commit
1866aa0d0d64 ("e1000e: Fix possible HW unit hang after an s0ix
exit") was a workaround for CSME problem to handle messages comes via H2ME
mailbox. This problem has been fixed by patch "e1000e: Enable the GPT
clock before sending message to the CSME".
Fixes:
3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Neftin [Sun, 8 May 2022 07:09:05 +0000 (10:09 +0300)]
e1000e: Enable GPT clock before sending message to CSME
[ Upstream commit
b49feacbeffc7635cc6692cbcc6a1eae2c17da6f ]
On corporate (CSME) ADL systems, the Ethernet Controller may stop working
("HW unit hang") after exiting from the s0ix state. The reason is that
CSME misses the message sent by the host. Enabling the dynamic GPT clock
solves this problem. This clock is cleared upon HW initialization.
Fixes:
3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Israel Rukshin [Thu, 14 Jul 2022 12:42:10 +0000 (12:42 +0000)]
nvme: fix block device naming collision
[ Upstream commit
6961b5e02876b3b47f030a1f1ee8fd3e631ac270 ]
The issue exists when multipath is enabled and the namespace is
shared, but all the other controller checks at nvme_is_unique_nsid()
are false. The reason for this issue is that nvme_is_unique_nsid()
returns false when is called from nvme_mpath_alloc_disk() due to an
uninitialized value of head->shared. The patch fixes it by setting
head->shared before nvme_mpath_alloc_disk() is called.
Fixes:
5974ea7ce0f9 ("nvme: allow duplicate NSIDs for private namespaces")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Thu, 24 Feb 2022 16:46:50 +0000 (17:46 +0100)]
nvme: check for duplicate identifiers earlier
[ Upstream commit
e2d77d2e11c4f1e70a1a24cc8fe63ff3dc9b53ef ]
Lift the check for duplicate identifiers into nvme_init_ns_head, which
avoids pointless error unwinding in case they don't match, and also
matches where we check identifier validity for the multipath case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Andersson [Sat, 9 Jul 2022 00:00:27 +0000 (17:00 -0700)]
scsi: ufs: core: Drop loglevel of WriteBoost message
[ Upstream commit
2ae57c995003a7840cb6b5ec5f0c06193695321b ]
Commit '
3b5f3c0d0548 ("scsi: ufs: core: Tidy up WB configuration code")'
changed the log level of the write boost enable/disable notification from
debug to info. This results in a lot of noise in the kernel log during
normal operation.
Drop it back to debug level to avoid this.
Link: https://lore.kernel.org/r/20220709000027.3929970-1-bjorn.andersson@linaro.org
Fixes:
3b5f3c0d0548 ("scsi: ufs: core: Tidy up WB configuration code")
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Wed, 6 Jul 2022 12:59:42 +0000 (20:59 +0800)]
scsi: megaraid: Clear READ queue map's nr_queues
[ Upstream commit
8312cd3a7b835ae3033a679e5f0014a40e7891c5 ]
The megaraid SCSI driver sets set->nr_maps as 3 if poll_queues is > 0, and
blk-mq actually initializes each map's nr_queues as nr_hw_queues.
Consequently the driver has to clear READ queue map's nr_queues, otherwise
the queue map becomes broken if poll_queues is set as non-zero.
Link: https://lore.kernel.org/r/20220706125942.528533-1-ming.lei@redhat.com
Fixes:
9e4bec5b2a23 ("scsi: megaraid_sas: mq_poll support")
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: sumit.saxena@broadcom.com
Cc: chandrakanth.patil@broadcom.com
Cc: linux-block@vger.kernel.org
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fangzhi Zuo [Wed, 6 Jul 2022 19:52:46 +0000 (15:52 -0400)]
drm/amd/display: Ignore First MST Sideband Message Return Error
[ Upstream commit
acea108fa067d140bd155161a79b1fcd967f4137 ]
[why]
First MST sideband message returns AUX_RET_ERROR_HPD_DISCON
on certain intel platform. Aux transaction considered failure
if HPD unexpected pulled low. The actual aux transaction success
in such case, hence do not return error.
[how]
Not returning error when AUX_RET_ERROR_HPD_DISCON detected
on the first sideband message.
v2: squash in additional DMI entries
v3: squash in static fix
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Wed, 20 Oct 2021 20:45:00 +0000 (16:45 -0400)]
drm/amdgpu/display: add quirk handling for stutter mode
[ Upstream commit
3ce51649cdf23ab463494df2bd6d1e9529ebdc6a ]
Stutter mode is a power saving feature on GPUs, however at
least one early raven system exhibits stability issues with
it. Add a quirk to disable it for that system.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214417
Fixes:
005440066f929b ("drm/amdgpu: enable gfxoff again on raven series (v2)")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wayne Lin [Fri, 23 Jul 2021 03:50:28 +0000 (11:50 +0800)]
drm/amd/display: Fork thread to offload work of hpd_rx_irq
[ Upstream commit
8e794421bc981586d0af4e959ec76d668c793a55 ]
[Why]
Currently, we will try to get dm.dc_lock in handle_hpd_rx_irq() when
link lost happened, which is risky and could cause deadlock.
e.g. If we are under procedure to enable MST streams and then monitor
happens to toggle short hpd to notify link lost, then
handle_hpd_rx_irq() will get blocked due to stream enabling flow has
dc_lock. However, under MST, enabling streams involves communication
with remote sinks which need to use handle_hpd_rx_irq() to handle
sideband messages. Thus, we have deadlock here.
[How]
Target is to have handle_hpd_rx_irq() finished as soon as possilble.
Hence we can react to interrupt quickly. Besides, we should avoid to
grabe dm.dc_lock within handle_hpd_rx_irq() to avoid deadlock situation.
Firstly, revert patches which introduced to use dm.dc_lock in
handle_hpd_rx_irq():
* commit ("drm/amd/display: NULL pointer error during ")
* commit ("drm/amd/display: Only one display lights up while using MST")
* commit ("drm/amd/display: take dc_lock in short pulse handler only")
Instead, create work to handle irq events which needs dm.dc_lock.
Besides:
* Create struct hpd_rx_irq_offload_work_queue for each link to handle
its short hpd events
* Avoid to handle link lost/ automated test if the link is disconnected
* Defer dc_lock needed works in dc_link_handle_hpd_rx_irq(). This
function should just handle simple stuff for us (e.g. DPCD R/W).
However, deferred works should still be handled by the order that
dc_link_handle_hpd_rx_irq() used to be.
* Change function name dm_handle_hpd_rx_irq() to
dm_handle_mst_sideband_msg() to be more specific
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wayne Lin [Fri, 13 Aug 2021 07:54:47 +0000 (15:54 +0800)]
drm/amd/display: Add option to defer works of hpd_rx_irq
[ Upstream commit
410ad92d7fecd30de7456c19e326e272c2153ff2 ]
[Why & How]
Due to some code flow constraints, we need to defer dc_lock needed works
from dc_link_handle_hpd_rx_irq(). Thus, do following changes:
* Change allow_hpd_rx_irq() from static to public
* Change handle_automated_test() from static to public
* Extract link lost handling flow out from dc_link_handle_hpd_rx_irq()
and put those into a new function dc_link_dp_handle_link_loss()
* Add one option parameter to decide whether defer works within
dc_link_handle_hpd_rx_irq()
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jude Shih [Sun, 25 Jul 2021 05:55:02 +0000 (13:55 +0800)]
drm/amd/display: Support for DMUB HPD interrupt handling
[ Upstream commit
e27c41d5b0681c597ac1894f4e02cf626e062250 ]
[WHY]
To add support for HPD interrupt handling from DMUB.
HPD interrupt could be triggered from outbox1 from DMUB
[HOW]
1) Use queue_work to handle hpd task from outbox1
2) Add handle_hpd_irq_helper to share interrupt handling code
between legacy and DMUB HPD from outbox1
3) Added DMUB HPD handling in dmub_srv_stat_get_notification().
HPD handling callback function and wake up the DMUB thread.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jude Shih <shenshih@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Tue, 12 Jul 2022 00:15:30 +0000 (17:15 -0700)]
tcp: Fix data-races around sysctl_tcp_ecn.
[ Upstream commit
4785a66702f086cf2ea84bdbe6ec921f274bd9f2 ]
While reading sysctl_tcp_ecn, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaoming Ni [Sat, 22 Jan 2022 06:10:55 +0000 (22:10 -0800)]
sysctl: move some boundary constants from sysctl.c to sysctl_vals
[ Upstream commit
78e36f3b0dae586f623c4a37ec5eb5496f5abbe1 ]
sysctl has helpers which let us specify boundary values for a min or max
int value. Since these are used for a boundary check only they don't
change, so move these variables to sysctl_vals to avoid adding duplicate
variables. This will help with our cleanup of kernel/sysctl.c.
[akpm@linux-foundation.org: update it for "mm/pagealloc: sysctl: change watermark_scale_factor max limit to 30%"]
[mcgrof@kernel.org: major rebase]
Link: https://lkml.kernel.org/r/20211123202347.818157-3-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suren Baghdasaryan [Fri, 14 Jan 2022 22:07:17 +0000 (14:07 -0800)]
mm/pagealloc: sysctl: change watermark_scale_factor max limit to 30%
[ Upstream commit
39c65a94cd9661532be150e88f8b02f4a6844a35 ]
For embedded systems with low total memory, having to run applications
with relatively large memory requirements, 10% max limitation for
watermark_scale_factor poses an issue of triggering direct reclaim every
time such application is started. This results in slow application
startup times and bad end-user experience.
By increasing watermark_scale_factor max limit we allow vendors more
flexibility to choose the right level of kswapd aggressiveness for their
device and workload requirements.
Link: https://lkml.kernel.org/r/20211124193604.2758863-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Fengfei Xi <xi.fengfei@h3c.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongli Zhang [Fri, 4 Mar 2022 14:55:06 +0000 (06:55 -0800)]
net: tun: split run_ebpf_filter() and pskb_trim() into different "if statement"
[ Upstream commit
45a15d89fbcd280571eba8e5ca309e14ba6afa8f ]
No functional change.
Just to split the if statement into different conditions to use
kfree_skb_reason() to trace the reason later.
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Mon, 24 Jan 2022 20:24:57 +0000 (12:24 -0800)]
ipv4/tcp: do not use per netns ctl sockets
[ Upstream commit
37ba017dcc3b1123206808979834655ddcf93251 ]
TCP ipv4 uses per-cpu/per-netns ctl sockets in order to send
RST and some ACK packets (on behalf of TIMEWAIT sockets).
This adds memory and cpu costs, which do not seem needed.
Now typical servers have 256 or more cores, this adds considerable
tax to netns users.
tcp sockets are used from BH context, are not receiving packets,
and do not store any persistent state but the 'struct net' pointer
in order to be able to use IPv4 output functions.
Note that I attempted a related change in the past, that had
to be hot-fixed in commit
bdbbb8527b6f ("ipv4: tcp: get rid of ugly unicast_sock")
This patch could very well surface old bugs, on layers not
taking care of sk->sk_kern_sock properly.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Tue, 5 Jul 2022 13:07:26 +0000 (15:07 +0200)]
perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()
[ Upstream commit
68e3c69803dada336893640110cb87221bb01dcf ]
Yang Jihing reported a race between perf_event_set_output() and
perf_mmap_close():
CPU1 CPU2
perf_mmap_close(e2)
if (atomic_dec_and_test(&e2->rb->mmap_count)) // 1 - > 0
detach_rest = true
ioctl(e1, IOC_SET_OUTPUT, e2)
perf_event_set_output(e1, e2)
...
list_for_each_entry_rcu(e, &e2->rb->event_list, rb_entry)
ring_buffer_attach(e, NULL);
// e1 isn't yet added and
// therefore not detached
ring_buffer_attach(e1, e2->rb)
list_add_rcu(&e1->rb_entry,
&e2->rb->event_list)
After this; e1 is attached to an unmapped rb and a subsequent
perf_mmap() will loop forever more:
again:
mutex_lock(&e->mmap_mutex);
if (event->rb) {
...
if (!atomic_inc_not_zero(&e->rb->mmap_count)) {
...
mutex_unlock(&e->mmap_mutex);
goto again;
}
}
The loop in perf_mmap_close() holds e2->mmap_mutex, while the attach
in perf_event_set_output() holds e1->mmap_mutex. As such there is no
serialization to avoid this race.
Change perf_event_set_output() to take both e1->mmap_mutex and
e2->mmap_mutex to alleviate that problem. Additionally, have the loop
in perf_mmap() detach the rb directly, this avoids having to wait for
the concurrent perf_mmap_close() to get around to doing it to make
progress.
Fixes:
9bb5d40cd93c ("perf: Fix mmap() accounting hole")
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lkml.kernel.org/r/YsQ3jm2GR38SW7uD@worktop.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
William Dean [Sun, 10 Jul 2022 15:49:22 +0000 (23:49 +0800)]
pinctrl: ralink: Check for null return of devm_kcalloc
[ Upstream commit
c3b821e8e406d5650e587b7ac624ac24e9b780a8 ]
Because of the possible failure of the allocation, data->domains might
be NULL pointer and will cause the dereference of the NULL pointer
later.
Therefore, it might be better to check it and directly return -ENOMEM
without releasing data manually if fails, because the comment of the
devm_kmalloc() says "Memory allocated with this function is
automatically freed on driver detach.".
Fixes:
a86854d0c599b ("treewide: devm_kzalloc() -> devm_kcalloc()")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Link: https://lore.kernel.org/r/20220710154922.2610876-1-williamsukatube@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arınç ÜNAL [Thu, 14 Apr 2022 17:39:04 +0000 (20:39 +0300)]
pinctrl: ralink: rename pinctrl-rt2880 to pinctrl-ralink
[ Upstream commit
6b3dd85b0bdec1a8308fa5dcbafcd5d55b5f3608 ]
pinctrl-rt2880.c and pinmux.h make up the Ralink pinctrl driver. Rename
pinctrl-rt2880.c to pinctrl-ralink.c. Rename pinmux.h to pinctrl-ralink.h.
Fix references to it. Rename functions that include "rt2880" to "ralink".
Remove PINCTRL_RT2880 symbol and make the existing PINCTRL_RALINK symbol
compile pinctrl-ralink.c. Change the bool to "Ralink pinctrl driver".
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-3-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arınç ÜNAL [Thu, 14 Apr 2022 17:39:03 +0000 (20:39 +0300)]
pinctrl: ralink: rename MT7628(an) functions to MT76X8
[ Upstream commit
150438c86f55989632005b92c94f4aa2ec562ed6 ]
The functions that include "MT7628(an)" are for MT7628 and MT7688 SoCs.
Rename them to MT76X8 to refer to both of the SoCs.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mustafa Ismail [Tue, 5 Jul 2022 23:08:37 +0000 (18:08 -0500)]
RDMA/irdma: Fix sleep from invalid context BUG
[ Upstream commit
cc0315564d6eec91c716d314b743321be24c70b3 ]
Taking the qos_mutex to process RoCEv2 QP's on netdev events causes a
kernel splat.
Fix this by removing the handling for RoCEv2 in
irdma_cm_teardown_connections that uses the mutex. This handling is only
needed for iWARP to avoid having connections established while the link is
down or having connections remain functional after the IP address is
removed.
BUG: sleeping function called from invalid context at kernel/locking/mutex.
Call Trace:
kernel: dump_stack+0x66/0x90
kernel: ___might_sleep.cold.92+0x8d/0x9a
kernel: mutex_lock+0x1c/0x40
kernel: irdma_cm_teardown_connections+0x28e/0x4d0 [irdma]
kernel: ? check_preempt_curr+0x7a/0x90
kernel: ? select_idle_sibling+0x22/0x3c0
kernel: ? select_task_rq_fair+0x94c/0xc90
kernel: ? irdma_exec_cqp_cmd+0xc27/0x17c0 [irdma]
kernel: ? __wake_up_common+0x7a/0x190
kernel: irdma_if_notify+0x3cc/0x450 [irdma]
kernel: ? sched_clock_cpu+0xc/0xb0
kernel: irdma_inet6addr_event+0xc6/0x150 [irdma]
Fixes:
146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mustafa Ismail [Tue, 5 Jul 2022 23:08:36 +0000 (18:08 -0500)]
RDMA/irdma: Do not advertise 1GB page size for x722
[ Upstream commit
5e8afb8792f3b6ae7ccf700f8c19225382636401 ]
x722 does not support 1GB page size but the irdma driver incorrectly
advertises 1GB page size support for x722 device to ib_core to compute the
best page size to use on this MR. This could lead to incorrect start
offsets computed by hardware on the MR.
Fixes:
b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Mon, 23 May 2022 14:10:09 +0000 (18:10 +0400)]
power/reset: arm-versatile: Fix refcount leak in versatile_reboot_probe
[ Upstream commit
80192eff64eee9b3bc0594a47381937b94b9d65a ]
of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
0e545f57b708 ("power: reset: driver for the Versatile syscon reboot")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangyu Hua [Wed, 1 Jun 2022 06:46:25 +0000 (14:46 +0800)]
xfrm: xfrm_policy: fix a possible double xfrm_pols_put() in xfrm_bundle_lookup()
[ Upstream commit
f85daf0e725358be78dfd208dea5fd665d8cb901 ]
xfrm_policy_lookup() will call xfrm_pol_hold_rcu() to get a refcount of
pols[0]. This refcount can be dropped in xfrm_expand_policies() when
xfrm_expand_policies() return error. pols[0]'s refcount is balanced in
here. But xfrm_bundle_lookup() will also call xfrm_pols_put() with
num_pols == 1 to drop this refcount when xfrm_expand_policies() return
error.
This patch also fix an illegal address access. pols[0] will save a error
point when xfrm_policy_lookup fails. This lead to xfrm_pols_put to resolve
an illegal address in xfrm_bundle_lookup's error path.
Fix these by setting num_pols = 0 in xfrm_expand_policies()'s error path.
Fixes:
80c802f3073e ("xfrm: cache bundles instead of policies for outgoing flows")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Wed, 13 Jul 2022 20:51:51 +0000 (13:51 -0700)]
ip: Fix data-races around sysctl_ip_default_ttl.
commit
8281b7ec5c56b71cb2cc5a1728b41607be66959c upstream.
While reading sysctl_ip_default_ttl, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hayes Wang [Mon, 18 Jul 2022 08:21:20 +0000 (16:21 +0800)]
r8152: fix a WOL issue
commit
cdf0b86b250fd3c1c3e120c86583ea510c52e4ce upstream.
This fixes that the platform is waked by an unexpected packet. The
size and range of FIFO is different when the device enters S3 state,
so it is necessary to correct some settings when suspending.
Regardless of jumbo frame, set RMS to 1522 and MTPS to MTPS_DEFAULT.
Besides, enable MCU_BORW_EN to update the method of calculating the
pointer of data. Then, the hardware could get the correct data.
Fixes:
195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20220718082120.10957-391-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 21 Jul 2022 21:36:10 +0000 (14:36 -0700)]
xfs: prevent a WARN_ONCE() in xfs_ioc_attr_list()
[ Upstream commit
6ed6356b07714e0198be3bc3ecccc8b40a212de4 ]
The "bufsize" comes from the root user. If "bufsize" is negative then,
because of type promotion, neither of the validation checks at the start
of the function are able to catch it:
if (bufsize < sizeof(struct xfs_attrlist) ||
bufsize > XFS_XATTR_LIST_MAX)
return -EINVAL;
This means "bufsize" will trigger (WARN_ON_ONCE(size > INT_MAX)) in
kvmalloc_node(). Fix this by changing the type from int to size_t.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Foster [Thu, 21 Jul 2022 21:36:09 +0000 (14:36 -0700)]
xfs: fix perag reference leak on iteration race with growfs
[ Upstream commit
892a666fafa19ab04b5e948f6c92f98f1dafb489 ]
The for_each_perag*() set of macros are hacky in that some (i.e.
those based on sb_agcount) rely on the assumption that perag
iteration terminates naturally with a NULL perag at the specified
end_agno. Others allow for the final AG to have a valid perag and
require the calling function to clean up any potential leftover
xfs_perag reference on termination of the loop.
Aside from providing a subtly inconsistent interface, the former
variant is racy with growfs because growfs can create discoverable
post-eofs perags before the final superblock update that completes
the grow operation and increases sb_agcount. This leads to the
following assert failure (reproduced by xfs/104) in the perag free
path during unmount:
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/libxfs/xfs_ag.c, line: 195
This occurs because one of the many for_each_perag() loops in the
code that is expected to terminate with a NULL pag (and thus has no
post-loop xfs_perag_put() check) raced with a growfs and found a
non-NULL post-EOFS perag, but terminated naturally based on the
end_agno check without releasing the post-EOFS perag.
Rework the iteration logic to lift the agno check from the main for
loop conditional to the iteration helper function. The for loop now
purely terminates on a NULL pag and xfs_perag_next() avoids taking a
reference to any perag beyond end_agno in the first place.
Fixes:
f250eedcf762 ("xfs: make for_each_perag... a first class citizen")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Foster [Thu, 21 Jul 2022 21:36:08 +0000 (14:36 -0700)]
xfs: terminate perag iteration reliably on agcount
[ Upstream commit
8ed004eb9d07a5d6114db3e97a166707c186262d ]
The for_each_perag_from() iteration macro relies on sb_agcount to
process every perag currently within EOFS from a given starting
point. It's perfectly valid to have perag structures beyond
sb_agcount, however, such as if a growfs is in progress. If a perag
loop happens to race with growfs in this manner, it will actually
attempt to process the post-EOFS perag where ->pag_agno ==
sb_agcount. This is reproduced by xfs/104 and manifests as the
following assert failure in superblock write verifier context:
XFS: Assertion failed: agno < mp->m_sb.sb_agcount, file: fs/xfs/libxfs/xfs_types.c, line: 22
Update the corresponding macro to only process perags that are
within the current sb_agcount.
Fixes:
58d43a7e3263 ("xfs: pass perags around in fsmap data dev functions")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Foster [Thu, 21 Jul 2022 21:36:07 +0000 (14:36 -0700)]
xfs: rename the next_agno perag iteration variable
[ Upstream commit
f1788b5e5ee25bedf00bb4d25f82b93820d61189 ]
Rename the next_agno variable to be consistent across the several
iteration macros and shorten line length.
[backport: dependency for
8ed004eb9d07a5d6114db3e97a166707c186262d]
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Foster [Thu, 21 Jul 2022 21:36:06 +0000 (14:36 -0700)]
xfs: fold perag loop iteration logic into helper function
[ Upstream commit
bf2307b195135ed9c95eebb38920d8bd41843092 ]
Fold the loop iteration logic into a helper in preparation for
further fixups. No functional change in this patch.
[backport: dependency for
f1788b5e5ee25bedf00bb4d25f82b93820d61189]
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Darrick J. Wong [Thu, 21 Jul 2022 21:36:05 +0000 (14:36 -0700)]
xfs: fix maxlevels comparisons in the btree staging code
[ Upstream commit
78e8ec83a404d63dcc86b251f42e4ee8aff27465 ]
The btree geometry computation function has an off-by-one error in that
it does not allow maximally tall btrees (nlevels == XFS_BTREE_MAXLEVELS).
This can result in repairs failing unnecessarily on very fragmented
filesystems. Subsequent patches to remove MAXLEVELS usage in favor of
the per-btree type computations will make this a much more likely
occurrence.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Fri, 15 Jul 2022 19:59:26 +0000 (12:59 -0700)]
mt76: mt7921: Fix the error handling path of mt7921_pci_probe()
commit
4e90db5e21eb3bb272fe47386dc3506755e209e9 upstream.
In case of error, some resources must be freed, as already done above and
below the devm_kmemdup() and __mt7921e_mcu_drv_pmctrl() calls added in the
commit in Fixes:.
Fixes:
602cc0c9618a ("mt76: mt7921e: fix possible probe failure after reboot")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Wang [Fri, 15 Jul 2022 19:59:25 +0000 (12:59 -0700)]
mt76: mt7921e: fix possible probe failure after reboot
commit
602cc0c9618a819ab00ea3c9400742a0ca318380 upstream.
It doesn't guarantee the mt7921e gets started with ASPM L0 after each
machine reboot on every platform.
If mt7921e gets started with not ASPM L0, it would be possible that the
driver encounters time to time failure in mt7921_pci_probe, like a
weird chip identifier is read
[ 215.514503] mt7921e 0000:05:00.0: ASIC revision:
feed0000
[ 216.604741] mt7921e: probe of 0000:05:00.0 failed with error -110
or failing to init hardware because the driver is not allowed to access the
register until the device is in ASPM L0 state. So, we call
__mt7921e_mcu_drv_pmctrl in early mt7921_pci_probe to force the device
to bring back to the L0 state for we can safely access registers in any
case.
In the patch, we move all functions from dma.c to pci.c and register mt76
bus operation earilier, that is the __mt7921e_mcu_drv_pmctrl depends on.
Fixes:
bf3747ae2e25 ("mt76: mt7921: enable aspm by default")
Reported-by: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Wang [Fri, 15 Jul 2022 19:59:24 +0000 (12:59 -0700)]
mt76: mt7921: use physical addr to unify register access
commit
f1e2eef111018a4f0d280656be4351c37e9e554b upstream.
Use physical address to unify the register access and reorder the
entries in fixed_map table to accelerate the address lookup for
MT7921e. Cosmetics the patch with adding an extra space to make all
entries in the array style consistent.
Tested-by: Deren Wu <deren.wu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Wang [Fri, 15 Jul 2022 19:59:23 +0000 (12:59 -0700)]
Revert "mt76: mt7921e: fix possible probe failure after reboot"
This reverts commit
649178c0493e4080b2b226b0ef9fa2d834b1b412 that is the
commit
602cc0c9618a819ab00ea3c9400742a0ca318380 upstream.
Because there was mistake in
'
649178c0493e ("mt76: mt7921e: fix possible probe failure after reboot")'
that caused WiFi reset cannot work well as the reported issue
"PROBLEM: [Stable v5.15.42+] [mt7921] Wake after suspend locks up system
when mt7921-driver is used on a Lenovo ThinkPad E15 G3" described in
http://lists.infradead.org/pipermail/linux-mediatek/2022-June/042668.html
So, we need to revert it before fixing and landing it again on the stable
tree from upstream.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Wang [Fri, 15 Jul 2022 19:59:22 +0000 (12:59 -0700)]
Revert "mt76: mt7921: Fix the error handling path of mt7921_pci_probe()"
This reverts commit
663457f421d41e9d2fcb1e84baf43d1433f80c08 that is the
commit
44c4237cf3436bda2b185ff728123651ad133f69 upstream.
Because there was mistake in
'
649178c0493e ("mt76: mt7921e: fix possible probe failure after reboot")'
that caused WiFi reset cannot work well as the reported issue
"PROBLEM: [Stable v5.15.42+] [mt7921] Wake after suspend locks up system
when mt7921-driver is used on a Lenovo ThinkPad E15 G3" described in
http://lists.infradead.org/pipermail/linux-mediatek/2022-June/042668.html
So we need to revert the patch first to avoid the conflict of reverting
'
649178c0493e ("mt76: mt7921e: fix possible probe failure after reboot")'
and will be applied back later after fixing.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Andrzej Siewior [Tue, 19 Jul 2022 16:08:12 +0000 (18:08 +0200)]
batman-adv: Use netif_rx_any_context() any.
This reverts the stable commit
e65d78b12fbc0 ("batman-adv: Use netif_rx().")
The commit message says:
| Since commit
|
baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.")
|
| the function netif_rx() can be used in preemptible/thread context as
| well as in interrupt context.
This commit (
baebdf48c3600) has not been backported to the 5.15 stable
series and therefore, the commit which builds upon it, must not be
backported either.
Revert the backport and use netif_rx_any_context() again.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Tue, 28 Jun 2022 10:09:22 +0000 (12:09 +0200)]
serial: mvebu-uart: correctly report configured baudrate value
commit
4f532c1e25319e42996ec18a1f473fd50c8e575d upstream.
Functions tty_termios_encode_baud_rate() and uart_update_timeout() should
be called with the baudrate value which was set to hardware. Linux then
report exact values via ioctl(TCGETS2) to userspace.
Change mvebu_uart_baud_rate_set() function to return baudrate value which
was set to hardware and propagate this value to above mentioned functions.
With this change userspace would see precise value in termios c_ospeed
field.
Fixes:
68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
Cc: stable <stable@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220628100922.10717-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeffrey Hugo [Mon, 18 Jul 2022 15:20:32 +0000 (15:20 +0000)]
PCI: hv: Fix interrupt mapping for multi-MSI
commit
a2bad844a67b1c7740bda63e87453baf63c3a7f7 upstream.
According to Dexuan, the hypervisor folks beleive that multi-msi
allocations are not correct. compose_msi_msg() will allocate multi-msi
one by one. However, multi-msi is a block of related MSIs, with alignment
requirements. In order for the hypervisor to allocate properly aligned
and consecutive entries in the IOMMU Interrupt Remapping Table, there
should be a single mapping request that requests all of the multi-msi
vectors in one shot.
Dexuan suggests detecting the multi-msi case and composing a single
request related to the first MSI. Then for the other MSIs in the same
block, use the cached information. This appears to be viable, so do it.
5.15 backport - add hv_msi_get_int_vector helper function. Fixed merge
conflict due to delivery_mode name change (APIC_DELIVERY_MODE_FIXED
is the value given to DELIVERY_MODE on x86). Removed unused variable
in hv_compose_msi_msg. Fixed reference to msi_desc->pci to point to
the same is_msix variable.
Suggested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1652282599-21643-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeffrey Hugo [Mon, 18 Jul 2022 15:20:31 +0000 (15:20 +0000)]
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
commit
b4b77778ecc5bfbd4e77de1b2fd5c1dd3c655f1f upstream.
Currently if compose_msi_msg() is called multiple times, it will free any
previous IRTE allocation, and generate a new allocation. While nothing
prevents this from occurring, it is extraneous when Linux could just reuse
the existing allocation and avoid a bunch of overhead.
However, when future IRTE allocations operate on blocks of MSIs instead of
a single line, freeing the allocation will impact all of the lines. This
could cause an issue where an allocation of N MSIs occurs, then some of
the lines are retargeted, and finally the allocation is freed/reallocated.
The freeing of the allocation removes all of the configuration for the
entire block, which requires all the lines to be retargeted, which might
not happen since some lines might already be unmasked/active.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1652282582-21595-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeffrey Hugo [Mon, 18 Jul 2022 15:20:30 +0000 (15:20 +0000)]
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
commit
455880dfe292a2bdd3b4ad6a107299fce610e64b upstream.
In the multi-MSI case, hv_arch_irq_unmask() will only operate on the first
MSI of the N allocated. This is because only the first msi_desc is cached
and it is shared by all the MSIs of the multi-MSI block. This means that
hv_arch_irq_unmask() gets the correct address, but the wrong data (always
0).
This can break MSIs.
Lets assume MSI0 is vector 34 on CPU0, and MSI1 is vector 33 on CPU0.
hv_arch_irq_unmask() is called on MSI0. It uses a hypercall to configure
the MSI address and data (0) to vector 34 of CPU0. This is correct. Then
hv_arch_irq_unmask is called on MSI1. It uses another hypercall to
configure the MSI address and data (0) to vector 33 of CPU0. This is
wrong, and results in both MSI0 and MSI1 being routed to vector 33. Linux
will observe extra instances of MSI1 and no instances of MSI0 despite the
endpoint device behaving correctly.
For the multi-MSI case, we need unique address and data info for each MSI,
but the cached msi_desc does not provide that. However, that information
can be gotten from the int_desc cached in the chip_data by
compose_msi_msg(). Fix the multi-MSI case to use that cached information
instead. Since hv_set_msi_entry_from_desc() is no longer applicable,
remove it.
5.15 backport - no changes to code, but merge conflict due to refactor.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1651068453-29588-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeffrey Hugo [Mon, 18 Jul 2022 15:20:29 +0000 (15:20 +0000)]
PCI: hv: Fix multi-MSI to allow more than one MSI vector
commit
08e61e861a0e47e5e1a3fb78406afd6b0cea6b6d upstream.
If the allocation of multiple MSI vectors for multi-MSI fails in the core
PCI framework, the framework will retry the allocation as a single MSI
vector, assuming that meets the min_vecs specified by the requesting
driver.
Hyper-V advertises that multi-MSI is supported, but reuses the VECTOR
domain to implement that for x86. The VECTOR domain does not support
multi-MSI, so the alloc will always fail and fallback to a single MSI
allocation.
In short, Hyper-V advertises a capability it does not implement.
Hyper-V can support multi-MSI because it coordinates with the hypervisor
to map the MSIs in the IOMMU's interrupt remapper, which is something the
VECTOR domain does not have. Therefore the fix is simple - copy what the
x86 IOMMU drivers (AMD/Intel-IR) do by removing
X86_IRQ_ALLOC_CONTIGUOUS_VECTORS after calling the VECTOR domain's
pci_msi_prepare().
5.15 backport - adds the hv_msi_prepare wrapper function
Fixes:
4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1649856981-14649-1-git-send-email-quic_jhugo@quicinc.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleksandr Tymoshenko [Fri, 15 Jul 2022 23:15:42 +0000 (23:15 +0000)]
Revert "selftest/vm: verify mmap addr in mremap_test"
This reverts commit
e8b9989597daac896b3400b7005f24bf15233d9a.
The upstream commit
9c85a9bae267 ("selftest/vm: verify mmap addr in
mremap_test") was backported as commit
a17404fcbfd0 ("selftest/vm:
verify mmap addr in mremap_test"). Repeated backport introduced the
duplicate of function get_mmap_min_addr to the file breakign the vm
selftest build.
Fixes:
e8b9989597da ("selftest/vm: verify mmap addr in mremap_test")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleksandr Tymoshenko [Fri, 15 Jul 2022 23:15:41 +0000 (23:15 +0000)]
Revert "selftest/vm: verify remap destination address in mremap_test"
This reverts commit
0b4e16093e081a3ab08b0d6cedf79b249f41b248.
The upstream commit
18d609daa546 ("selftest/vm: verify remap destination
address in mremap_test") was backported as commit
2688d967ec65
("selftest/vm: verify remap destination address in mremap_test").
Repeated backport introduced the duplicate of function
is_remap_region_valid to the file breakign the vm selftest build.
Fixes:
0b4e16093e08 ("selftest/vm: verify remap destination address in mremap_test")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Mon, 2 May 2022 11:20:36 +0000 (13:20 +0200)]
bus: mhi: host: pci_generic: add Telit FN990
commit
77fc41204734042861210b9d05338c9b8360affb upstream.
Add Telit FN990:
01:00.0 Unassigned class [ff00]: Qualcomm Device 0308
Subsystem: Device 1c5d:2010
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220502112036.443618-1-dnlplm@gmail.com
[mani: Added "host" to the subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Wed, 27 Apr 2022 07:26:48 +0000 (09:26 +0200)]
bus: mhi: host: pci_generic: add Telit FN980 v1 hardware revision
commit
a96ef8b504efb2ad445dfb6d54f9488c3ddf23d2 upstream.
Add Telit FN980 v1 hardware revision:
01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
Subsystem: Device [1c5d:2000]
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220427072648.17635-1-dnlplm@gmail.com
[mani: Added "host" to the subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian König [Fri, 15 Jul 2022 07:57:22 +0000 (09:57 +0200)]
drm/ttm: fix locking in vmap/vunmap TTM GEM helpers
commit
dbd0da2453c694f2f74651834d90fb280b57f151 upstream.
I've stumbled over this while reviewing patches for DMA-buf and it looks
like we completely messed the locking up here.
In general most TTM function should only be called while holding the
appropriate BO resv lock. Without this we could break the internal
buffer object state here.
Only compile tested!
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes:
43676605f890 ("drm/ttm: Add vmap/vunmap to TTM and TTM GEM helpers")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715111533.467012-1-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Snowberg [Wed, 20 Jul 2022 16:40:27 +0000 (12:40 -0400)]
lockdown: Fix kexec lockdown bypass with ima policy
commit
543ce63b664e2c2f9533d089a4664b559c3e6b5b upstream.
The lockdown LSM is primarily used in conjunction with UEFI Secure Boot.
This LSM may also be used on machines without UEFI. It can also be
enabled when UEFI Secure Boot is disabled. One of lockdown's features
is to prevent kexec from loading untrusted kernels. Lockdown can be
enabled through a bootparam or after the kernel has booted through
securityfs.
If IMA appraisal is used with the "ima_appraise=log" boot param,
lockdown can be defeated with kexec on any machine when Secure Boot is
disabled or unavailable. IMA prevents setting "ima_appraise=log" from
the boot param when Secure Boot is enabled, but this does not cover
cases where lockdown is used without Secure Boot.
To defeat lockdown, boot without Secure Boot and add ima_appraise=log to
the kernel command line; then:
$ echo "integrity" > /sys/kernel/security/lockdown
$ echo "appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig" > \
/sys/kernel/security/ima/policy
$ kexec -ls unsigned-kernel
Add a call to verify ima appraisal is set to "enforce" whenever lockdown
is enabled. This fixes CVE-2022-21505.
Cc: stable@vger.kernel.org
Fixes:
29d3c1c8dfe7 ("kexec: Allow kexec_file() with appropriate IMA policy when locked down")
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: John Haxby <john.haxby@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ido Schimmel [Tue, 19 Jul 2022 12:26:26 +0000 (15:26 +0300)]
mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
commit
e5ec6a2513383fe2ecc2ee3b5f51d97acbbcd4d8 upstream.
mlxsw needs to distinguish nexthops with a gateway from connected
nexthops in order to write the former to the adjacency table of the
device. The check used to rely on the fact that nexthops with a gateway
have a 'link' scope whereas connected nexthops have a 'host' scope. This
is no longer correct after commit
747c14307214 ("ip: fix dflt addr
selection for connected nexthop").
Fix that by instead checking the address family of the gateway IP. This
is a more direct way and also consistent with the IPv6 counterpart in
mlxsw_sp_rt6_is_gateway().
Cc: stable@vger.kernel.org
Fixes:
747c14307214 ("ip: fix dflt addr selection for connected nexthop")
Fixes:
597cfe4fc339 ("nexthop: Add support for IPv4 nexthops")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Dooks [Sun, 29 May 2022 15:22:00 +0000 (16:22 +0100)]
riscv: add as-options for modules with assembly compontents
commit
c1f6eff304e4dfa4558b6a8c6b2d26a91db6c998 upstream.
When trying to load modules built for RISC-V which include assembly files
the kernel loader errors with "unexpected relocation type 'R_RISCV_ALIGN'"
due to R_RISCV_ALIGN relocations being generated by the assembler.
The R_RISCV_ALIGN relocations can be removed at the expense of code space
by adding -mno-relax to gcc and as. In commit
7a8e7da42250138
("RISC-V: Fixes to module loading") -mno-relax is added to the build
variable KBUILD_CFLAGS_MODULE. See [1] for more info.
The issue is that when kbuild builds a .S file, it invokes gcc with
the -mno-relax flag, but this is not being passed through to the
assembler. Adding -Wa,-mno-relax to KBUILD_AFLAGS_MODULE ensures that
the assembler is invoked correctly. This may have now been fixed in
gcc[2] and this addition should not stop newer gcc and as from working.
[1] https://github.com/riscv/riscv-elf-psabi-doc/issues/183
[2] https://github.com/gcc-mirror/gcc/commit/
3b0a7d624e64eeb81e4d5e8c62c46d86ef521857
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Link: https://lore.kernel.org/r/20220529152200.609809-1-ben.dooks@codethink.co.uk
Fixes:
ab1ef68e5401 ("RISC-V: Add sections of PLT and GOT for kernel module")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabien Dessenne [Mon, 27 Jun 2022 14:23:50 +0000 (16:23 +0200)]
pinctrl: stm32: fix optional IRQ support to gpios
commit
a1d4ef1adf8bbd302067534ead671a94759687ed upstream.
To act as an interrupt controller, a gpio bank relies on the
"interrupt-parent" of the pin controller.
When this optional "interrupt-parent" misses, do not create any IRQ domain.
This fixes a "NULL pointer in stm32_gpio_domain_alloc()" kernel crash when
the interrupt-parent = <exti> property is not declared in the Device Tree.
Fixes:
0eb9f683336d ("pinctrl: Add IRQ support to STM32 gpios")
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220627142350.742973-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 23 Jul 2022 10:54:14 +0000 (12:54 +0200)]
Linux 5.15.57
Link: https://lore.kernel.org/r/20220722091133.320803732@linuxfoundation.org
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Fri, 19 Nov 2021 16:50:25 +0000 (17:50 +0100)]
x86: Use -mindirect-branch-cs-prefix for RETPOLINE builds
commit
68cf4f2a72ef8786e6b7af6fd9a89f27ac0f520d upstream.
In order to further enable commit:
bbe2df3f6b6d ("x86/alternative: Try inline spectre_v2=retpoline,amd")
add the new GCC flag -mindirect-branch-cs-prefix:
https://gcc.gnu.org/g:
2196a681d7810ad8b227bf983f38ba716620545e
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102952
https://bugs.llvm.org/show_bug.cgi?id=52323
to RETPOLINE=y builds. This should allow fully inlining retpoline,amd
for GCC builds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20211119165630.276205624@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Thu, 14 Jul 2022 10:20:19 +0000 (12:20 +0200)]
um: Add missing apply_returns()
commit
564d998106397394b6aad260f219b882b3347e62 upstream.
Implement apply_returns() stub for UM, just like all the other patching
routines.
Fixes:
15e67227c49a ("x86: Undo return-thunk damage")
Reported-by: Randy Dunlap <rdunlap@infradead.org)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/Ys%2Ft45l%2FgarIrD0u@worktop.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kim Phillips [Fri, 8 Jul 2022 21:21:28 +0000 (16:21 -0500)]
x86/bugs: Remove apostrophe typo
commit
bcf163150cd37348a0cb59e95c916a83a9344b0e upstream.
Remove a superfluous ' in the mitigation string.
Fixes:
e8ec1b6e08a2 ("x86/bugs: Enable STIBP for JMP2RET")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:39:15 +0000 (13:39 -0300)]
tools headers cpufeatures: Sync with the kernel sources
commit
f098addbdb44c8a565367f5162f3ab170ed9404a upstream.
To pick the changes from:
f43b9876e857c739 ("x86/retbleed: Add fine grained Kconfig knobs")
a149180fbcf336e9 ("x86: Add magic AMD return-thunk")
15e67227c49a5783 ("x86: Undo return-thunk damage")
369ae6ffc41a3c11 ("x86/retpoline: Cleanup some #ifdefery")
4ad3278df6fe2b08 x86/speculation: Disable RRSBA behavior
26aae8ccbc197223 x86/cpu/amd: Enumerate BTC_NO
9756bba28470722d x86/speculation: Fill RSB on vmexit for IBRS
3ebc170068885b6f x86/bugs: Add retbleed=ibpb
2dbb887e875b1de3 x86/entry: Add kernel IBRS implementation
6b80b59b35557065 x86/bugs: Report AMD retbleed vulnerability
a149180fbcf336e9 x86: Add magic AMD return-thunk
15e67227c49a5783 x86: Undo return-thunk damage
a883d624aed463c8 x86/cpufeatures: Move RETPOLINE flags to word 11
51802186158c74a0 x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org
Link: https://lore.kernel.org/lkml/YtQM40VmiLTkPND2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnaldo Carvalho de Melo [Thu, 1 Jul 2021 16:32:18 +0000 (13:32 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
commit
91d248c3b903b46a58cbc7e8d38d684d3e4007c2 upstream.
To pick up the changes from these csets:
4ad3278df6fe2b08 ("x86/speculation: Disable RRSBA behavior")
d7caac991feeef1b ("x86/cpu/amd: Add Spectral Chicken")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YtQTm9wsB3hxQWvy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Fri, 15 Jul 2022 11:34:55 +0000 (07:34 -0400)]
KVM: emulate: do not adjust size of fastop and setcc subroutines
commit
79629181607e801c0b41b8790ac4ee2eb5d7bc3e upstream.
Instead of doing complicated calculations to find the size of the subroutines
(which are even more complicated because they need to be stringified into
an asm statement), just hardcode to 16.
It is less dense for a few combinations of IBT/SLS/retbleed, but it has
the advantage of being really simple.
Cc: stable@vger.kernel.org # 5.15.x: 84e7051c0bc1: x86/kvm: fix FASTOP_SIZE when return thunks are enabled
Cc: stable@vger.kernel.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thadeu Lima de Souza Cascardo [Wed, 13 Jul 2022 17:12:41 +0000 (14:12 -0300)]
x86/kvm: fix FASTOP_SIZE when return thunks are enabled
commit
84e7051c0bc1f2a13101553959b3a9d9a8e24939 upstream.
The return thunk call makes the fastop functions larger, just like IBT
does. Consider a 16-byte FASTOP_SIZE when CONFIG_RETHUNK is enabled.
Otherwise, functions will be incorrectly aligned and when computing their
position for differently sized operators, they will executed in the middle
or end of a function, which may as well be an int3, leading to a crash
like:
[ 36.091116] int3: 0000 [#1] SMP NOPTI
[ 36.091119] CPU: 3 PID: 1371 Comm: qemu-system-x86 Not tainted 5.15.0-41-generic #44
[ 36.091120] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 36.091121] RIP: 0010:xaddw_ax_dx+0x9/0x10 [kvm]
[ 36.091185] Code: 00 0f bb d0 c3 cc cc cc cc 48 0f bb d0 c3 cc cc cc cc 0f 1f 80 00 00 00 00 0f c0 d0 c3 cc cc cc cc 66 0f c1 d0 c3 cc cc cc cc <0f> 1f 80 00 00 00 00 0f c1 d0 c3 cc cc cc cc 48 0f c1 d0 c3 cc cc
[ 36.091186] RSP: 0018:
ffffb1f541143c98 EFLAGS:
00000202
[ 36.091188] RAX:
0000000089abcdef RBX:
0000000000000001 RCX:
0000000000000000
[ 36.091188] RDX:
0000000076543210 RSI:
ffffffffc073c6d0 RDI:
0000000000000200
[ 36.091189] RBP:
ffffb1f541143ca0 R08:
ffff9f1803350a70 R09:
0000000000000002
[ 36.091190] R10:
ffff9f1803350a70 R11:
0000000000000000 R12:
ffff9f1803350a70
[ 36.091190] R13:
ffffffffc077fee0 R14:
0000000000000000 R15:
0000000000000000
[ 36.091191] FS:
00007efdfce8d640(0000) GS:
ffff9f187dd80000(0000) knlGS:
0000000000000000
[ 36.091192] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 36.091192] CR2:
0000000000000000 CR3:
0000000009b62002 CR4:
0000000000772ee0
[ 36.091195] PKRU:
55555554
[ 36.091195] Call Trace:
[ 36.091197] <TASK>
[ 36.091198] ? fastop+0x5a/0xa0 [kvm]
[ 36.091222] x86_emulate_insn+0x7b8/0xe90 [kvm]
[ 36.091244] x86_emulate_instruction+0x2f4/0x630 [kvm]
[ 36.091263] ? kvm_arch_vcpu_load+0x7c/0x230 [kvm]
[ 36.091283] ? vmx_prepare_switch_to_host+0xf7/0x190 [kvm_intel]
[ 36.091290] complete_emulated_mmio+0x297/0x320 [kvm]
[ 36.091310] kvm_arch_vcpu_ioctl_run+0x32f/0x550 [kvm]
[ 36.091330] kvm_vcpu_ioctl+0x29e/0x6d0 [kvm]
[ 36.091344] ? kvm_vcpu_ioctl+0x120/0x6d0 [kvm]
[ 36.091357] ? __fget_files+0x86/0xc0
[ 36.091362] ? __fget_files+0x86/0xc0
[ 36.091363] __x64_sys_ioctl+0x92/0xd0
[ 36.091366] do_syscall_64+0x59/0xc0
[ 36.091369] ? syscall_exit_to_user_mode+0x27/0x50
[ 36.091370] ? do_syscall_64+0x69/0xc0
[ 36.091371] ? syscall_exit_to_user_mode+0x27/0x50
[ 36.091372] ? __x64_sys_writev+0x1c/0x30
[ 36.091374] ? do_syscall_64+0x69/0xc0
[ 36.091374] ? exit_to_user_mode_prepare+0x37/0xb0
[ 36.091378] ? syscall_exit_to_user_mode+0x27/0x50
[ 36.091379] ? do_syscall_64+0x69/0xc0
[ 36.091379] ? do_syscall_64+0x69/0xc0
[ 36.091380] ? do_syscall_64+0x69/0xc0
[ 36.091381] ? do_syscall_64+0x69/0xc0
[ 36.091381] entry_SYSCALL_64_after_hwframe+0x61/0xcb
[ 36.091384] RIP: 0033:0x7efdfe6d1aff
[ 36.091390] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 36.091391] RSP: 002b:
00007efdfce8c460 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 36.091393] RAX:
ffffffffffffffda RBX:
000000000000ae80 RCX:
00007efdfe6d1aff
[ 36.091393] RDX:
0000000000000000 RSI:
000000000000ae80 RDI:
000000000000000c
[ 36.091394] RBP:
0000558f1609e220 R08:
0000558f13fb8190 R09:
00000000ffffffff
[ 36.091394] R10:
0000558f16b5e950 R11:
0000000000000246 R12:
0000000000000000
[ 36.091394] R13:
0000000000000001 R14:
0000000000000000 R15:
0000000000000000
[ 36.091396] </TASK>
[ 36.091397] Modules linked in: isofs nls_iso8859_1 kvm_intel joydev kvm input_leds serio_raw sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua ipmi_devintf ipmi_msghandler drm msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net net_failover crypto_simd ahci xhci_pci cryptd psmouse virtio_blk libahci xhci_pci_renesas failover
[ 36.123271] ---[ end trace
db3c0ab5a48fabcc ]---
[ 36.123272] RIP: 0010:xaddw_ax_dx+0x9/0x10 [kvm]
[ 36.123319] Code: 00 0f bb d0 c3 cc cc cc cc 48 0f bb d0 c3 cc cc cc cc 0f 1f 80 00 00 00 00 0f c0 d0 c3 cc cc cc cc 66 0f c1 d0 c3 cc cc cc cc <0f> 1f 80 00 00 00 00 0f c1 d0 c3 cc cc cc cc 48 0f c1 d0 c3 cc cc
[ 36.123320] RSP: 0018:
ffffb1f541143c98 EFLAGS:
00000202
[ 36.123321] RAX:
0000000089abcdef RBX:
0000000000000001 RCX:
0000000000000000
[ 36.123321] RDX:
0000000076543210 RSI:
ffffffffc073c6d0 RDI:
0000000000000200
[ 36.123322] RBP:
ffffb1f541143ca0 R08:
ffff9f1803350a70 R09:
0000000000000002
[ 36.123322] R10:
ffff9f1803350a70 R11:
0000000000000000 R12:
ffff9f1803350a70
[ 36.123323] R13:
ffffffffc077fee0 R14:
0000000000000000 R15:
0000000000000000
[ 36.123323] FS:
00007efdfce8d640(0000) GS:
ffff9f187dd80000(0000) knlGS:
0000000000000000
[ 36.123324] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 36.123325] CR2:
0000000000000000 CR3:
0000000009b62002 CR4:
0000000000772ee0
[ 36.123327] PKRU:
55555554
[ 36.123328] Kernel panic - not syncing: Fatal exception in interrupt
[ 36.123410] Kernel Offset: 0x1400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 36.135305] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes:
aa3d480315ba ("x86: Use return-thunk in asm code")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Co-developed-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Message-Id: <
20220713171241.184026-1-cascardo@canonical.com>
Tested-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thadeu Lima de Souza Cascardo [Fri, 15 Jul 2022 19:45:50 +0000 (16:45 -0300)]
efi/x86: use naked RET on mixed mode call wrapper
commit
51a6fa0732d6be6a44e0032752ad2ac10d67c796 upstream.
When running with return thunks enabled under 32-bit EFI, the system
crashes with:
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address:
000000005bc02900
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0011) - permissions violation
PGD 18f7063 P4D 18f7063 PUD 18ff063 PMD 190e063 PTE
800000005bc02063
Oops: 0011 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc6+ #166
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:0x5bc02900
Code: Unable to access opcode bytes at RIP 0x5bc028d6.
RSP: 0018:
ffffffffb3203e10 EFLAGS:
00010046
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000048
RDX:
000000000190dfac RSI:
0000000000001710 RDI:
000000007eae823b
RBP:
ffffffffb3203e70 R08:
0000000001970000 R09:
ffffffffb3203e28
R10:
747563657865206c R11:
6c6977203a696665 R12:
0000000000001710
R13:
0000000000000030 R14:
0000000001970000 R15:
0000000000000001
FS:
0000000000000000(0000) GS:
ffff8e013ca00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0:
0000000080050033
CR2:
000000005bc02900 CR3:
0000000001930000 CR4:
00000000000006f0
Call Trace:
? efi_set_virtual_address_map+0x9c/0x175
efi_enter_virtual_mode+0x4a6/0x53e
start_kernel+0x67c/0x71e
x86_64_start_reservations+0x24/0x2a
x86_64_start_kernel+0xe9/0xf4
secondary_startup_64_no_verify+0xe5/0xeb
That's because it cannot jump to the return thunk from the 32-bit code.
Using a naked RET and marking it as safe allows the system to proceed
booting.
Fixes:
aa3d480315ba ("x86: Use return-thunk in asm code")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: <stable@vger.kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 13 Jul 2022 15:24:37 +0000 (08:24 -0700)]
x86/speculation: Use DECLARE_PER_CPU for x86_spec_ctrl_current
commit
db886979683a8360ced9b24ab1125ad0c4d2cf76 upstream.
Clang warns:
arch/x86/kernel/cpu/bugs.c:58:21: error: section attribute is specified on redeclared variable [-Werror,-Wsection]
DEFINE_PER_CPU(u64, x86_spec_ctrl_current);
^
arch/x86/include/asm/nospec-branch.h:283:12: note: previous declaration is here
extern u64 x86_spec_ctrl_current;
^
1 error generated.
The declaration should be using DECLARE_PER_CPU instead so all
attributes stay in sync.
Cc: stable@vger.kernel.org
Fixes:
fc02735b14ff ("KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Wed, 13 Jul 2022 09:50:46 +0000 (11:50 +0200)]
x86/asm/32: Fix ANNOTATE_UNRET_SAFE use on 32-bit
commit
3131ef39fb03bbde237d0b8260445898f3dfda5b upstream.
The build on x86_32 currently fails after commit
9bb2ec608a20 (objtool: Update Retpoline validation)
with:
arch/x86/kernel/../../x86/xen/xen-head.S:35: Error: no such instruction: `annotate_unret_safe'
ANNOTATE_UNRET_SAFE is defined in nospec-branch.h. And head_32.S is
missing this include. Fix this.
Fixes:
9bb2ec608a20 ("objtool: Update Retpoline validation")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/63e23f80-033f-f64e-7522-2816debbc367@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Wed, 13 Jul 2022 22:39:33 +0000 (00:39 +0200)]
x86/xen: Fix initialisation in hypercall_page after rethunk
The hypercall_page is special and the RETs there should not be changed
into rethunk calls (but can have SLS mitigation). Change the initial
instructions to ret + int3 padding, as was done in upstream commit
5b2fc51576ef "x86/ibt,xen: Sprinkle the ENDBR".
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Tue, 12 Jul 2022 12:01:06 +0000 (14:01 +0200)]
x86/static_call: Serialize __static_call_fixup() properly
commit
c27c753ea6fd1237f4f96abf8b623d7bab505513 upstream.
__static_call_fixup() invokes __static_call_transform() without holding
text_mutex, which causes lockdep to complain in text_poke_bp().
Adding the proper locking cures that, but as this is either used during
early boot or during module finalizing, it's not required to use
text_poke_bp(). Add an argument to __static_call_transform() which tells
it to use text_poke_early() for it.
Fixes:
ee88d363d156 ("x86,static_call: Use alternative RET encoding")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Fri, 8 Jul 2022 20:36:09 +0000 (13:36 -0700)]
x86/speculation: Disable RRSBA behavior
commit
4ad3278df6fe2b0852b00d5757fc2ccd8e92c26e upstream.
Some Intel processors may use alternate predictors for RETs on
RSB-underflow. This condition may be vulnerable to Branch History
Injection (BHI) and intramode-BTI.
Kernel earlier added spectre_v2 mitigation modes (eIBRS+Retpolines,
eIBRS+LFENCE, Retpolines) which protect indirect CALLs and JMPs against
such attacks. However, on RSB-underflow, RET target prediction may
fallback to alternate predictors. As a result, RET's predicted target
may get influenced by branch history.
A new MSR_IA32_SPEC_CTRL bit (RRSBA_DIS_S) controls this fallback
behavior when in kernel mode. When set, RETs will not take predictions
from alternate predictors, hence mitigating RETs as well. Support for
this is enumerated by CPUID.7.2.EDX[RRSBA_CTRL] (bit2).
For spectre v2 mitigation, when a user selects a mitigation that
protects indirect CALLs and JMPs against BHI and intramode-BTI, set
RRSBA_DIS_S also to protect RETs for RSB-underflow case.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: no X86_FEATURE_INTEL_PPIN]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konrad Rzeszutek Wilk [Fri, 8 Jul 2022 17:10:11 +0000 (19:10 +0200)]
x86/kexec: Disable RET on kexec
commit
697977d8415d61f3acbc4ee6d564c9dcf0309507 upstream.
All the invocations unroll to __x86_return_thunk and this file
must be PIC independent.
This fixes kexec on 64-bit AMD boxes.
[ bp: Fix 32-bit build. ]
Reported-by: Edward Tran <edward.tran@oracle.com>
Reported-by: Awais Tanveer <awais.tanveer@oracle.com>
Suggested-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thadeu Lima de Souza Cascardo [Thu, 7 Jul 2022 16:41:52 +0000 (13:41 -0300)]
x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
commit
2259da159fbe5dba8ac00b560cf00b6a6537fa18 upstream.
There are some VM configurations which have Skylake model but do not
support IBPB. In those cases, when using retbleed=ibpb, userspace is going
to be killed and kernel is going to panic.
If the CPU does not support IBPB, warn and proceed with the auto option. Also,
do not fallback to IBPB on AMD/Hygon systems if it is not supported.
Fixes:
3ebc17006888 ("x86/bugs: Add retbleed=ibpb")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Wed, 6 Jul 2022 13:33:30 +0000 (15:33 +0200)]
x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
commit
2c08b9b38f5b0f4a6c2d29be22b695e4ec4a556b upstream.
Commit
ee774dac0da1 ("x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()")
moved PUSH_AND_CLEAR_REGS out of error_entry, into its own function, in
part to avoid calling error_entry() for XenPV.
However, commit
7c81c0c9210c ("x86/entry: Avoid very early RET")
had to change that because the 'ret' was too early and moved it into
idtentry, bloating the text size, since idtentry is expanded for every
exception vector.
However, with the advent of xen_error_entry() in commit
d147553b64bad ("x86/xen: Add UNTRAIN_RET")
it became possible to remove PUSH_AND_CLEAR_REGS from idtentry, back
into *error_entry().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: error_entry still does cld]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 6 Jul 2022 22:01:15 +0000 (15:01 -0700)]
x86/bugs: Add Cannon lake to RETBleed affected CPU list
commit
f54d45372c6ac9c993451de5e51312485f7d10bc upstream.
Cannon lake is also affected by RETBleed, add it to the list.
Fixes:
6ad0ad2bf8a6 ("x86/bugs: Report Intel retbleed vulnerability")
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Mon, 27 Jun 2022 22:21:17 +0000 (22:21 +0000)]
x86/retbleed: Add fine grained Kconfig knobs
commit
f43b9876e857c739d407bc56df288b0ebe1a9164 upstream.
Do fine-grained Kconfig for all the various retbleed parts.
NOTE: if your compiler doesn't support return thunks this will
silently 'upgrade' your mitigation to IBPB, you might not like this.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: there is no CONFIG_OBJTOOL]
[cascardo: objtool calling and option parsing has changed]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Cooper [Fri, 24 Jun 2022 13:41:21 +0000 (14:41 +0100)]
x86/cpu/amd: Enumerate BTC_NO
commit
26aae8ccbc1972233afd08fb3f368947c0314265 upstream.
BTC_NO indicates that hardware is not susceptible to Branch Type Confusion.
Zen3 CPUs don't suffer BTC.
Hypervisors are expected to synthesise BTC_NO when it is appropriate
given the migration pool, to prevent kernels using heuristics.
[ bp: Massage. ]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: no X86_FEATURE_BRS]
[cascardo: no X86_FEATURE_CPPC]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Fri, 24 Jun 2022 12:03:25 +0000 (14:03 +0200)]
x86/common: Stamp out the stepping madness
commit
7a05bc95ed1c5a59e47aaade9fb4083c27de9e62 upstream.
The whole MMIO/RETBLEED enumeration went overboard on steppings. Get
rid of all that and simply use ANY.
If a future stepping of these models would not be affected, it had
better set the relevant ARCH_CAP_$FOO_NO bit in
IA32_ARCH_CAPABILITIES.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Tue, 14 Jun 2022 21:16:15 +0000 (23:16 +0200)]
x86/speculation: Fill RSB on vmexit for IBRS
commit
9756bba28470722dacb79ffce554336dd1f6a6cd upstream.
Prevent RSB underflow/poisoning attacks with RSB. While at it, add a
bunch of comments to attempt to document the current state of tribal
knowledge about RSB attacks and what exactly is being mitigated.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Tue, 14 Jun 2022 21:16:14 +0000 (23:16 +0200)]
KVM: VMX: Fix IBRS handling after vmexit
commit
bea7e31a5caccb6fe8ed989c065072354f0ecb52 upstream.
For legacy IBRS to work, the IBRS bit needs to be always re-written
after vmexit, even if it's already on.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Tue, 14 Jun 2022 21:16:13 +0000 (23:16 +0200)]
KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
commit
fc02735b14fff8c6678b521d324ade27b1a3d4cf upstream.
On eIBRS systems, the returns in the vmexit return path from
__vmx_vcpu_run() to vmx_vcpu_run() are exposed to RSB poisoning attacks.
Fix that by moving the post-vmexit spec_ctrl handling to immediately
after the vmexit.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Tue, 14 Jun 2022 21:16:12 +0000 (23:16 +0200)]
KVM: VMX: Convert launched argument to flags
commit
bb06650634d3552c0f8557e9d16aa1a408040e28 upstream.
Convert __vmx_vcpu_run()'s 'launched' argument to 'flags', in
preparation for doing SPEC_CTRL handling immediately after vmexit, which
will need another flag.
This is much easier than adding a fourth argument, because this code
supports both 32-bit and 64-bit, and the fourth argument on 32-bit would
have to be pushed on the stack.
Note that __vmx_vcpu_run_flags() is called outside of the noinstr
critical section because it will soon start calling potentially
traceable functions.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Tue, 14 Jun 2022 21:16:11 +0000 (23:16 +0200)]
KVM: VMX: Flatten __vmx_vcpu_run()
commit
8bd200d23ec42d66ccd517a72dd0b9cc6132d2fd upstream.
Move the vmx_vm{enter,exit}() functionality into __vmx_vcpu_run(). This
will make it easier to do the spec_ctrl handling before the first RET.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
[cascardo: remove ENDBR]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Fri, 24 Jun 2022 10:52:40 +0000 (12:52 +0200)]
objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
commit
8faea26e611189e933ea2281975ff4dc7c1106b6 upstream.
Commit
c536ed2fffd5 ("objtool: Remove SAVE/RESTORE hints")
removed the save/restore unwind hints because they were no longer
needed. Now they're going to be needed again so re-add them.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>