media: rockchip: rga: fix rga offset lookup

commit 11de3582675cc0b7136e12f3971f1da3e5a05382 upstream.

The arguments to rga_lookup_draw_pos() are passed in the wrong order,
rotate mode should be before mirror mode.

Fixes: 558c248f930e6 ("media: rockchip: rga: split src and dst buffer setup")
Cc: stable@vger.kernel.org
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: siano: Fix error handling in smsdvb_module_init()

commit 734ac57e47b3bdd140a1119e2c4e8e6f8ef8b33d upstream.

The smsdvb_module_init() returns without checking the retval from
smscore_register_hotplug().
If the smscore_register_hotplug() failed, the module failed to install,
leaving the smsdvb_debugfs not unregistered.

Fixes: 3f6b87cff66b ("[media] siano: allow showing the complete statistics via debugfs")
Cc: stable@vger.kernel.org
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vim2m: print device name after registering device

commit 143d75583f2427f3a97dba62413c4f0604867ebf upstream.

Move the v4l2_info() call displaying the video device name after the
device is actually registered.

This fixes a bug where the driver was always displaying "/dev/video0"
since it was reading from the vfd before it was registered.

Fixes: cf7f34777a5b ("media: vim2m: Register video device after setting up internals")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi: add check to handle incorrect queue size

commit 69baf245b23e20efda0079238b27fc63ecf13de1 upstream.

qsize represents size of shared queued between driver and video
firmware. Firmware can modify this value to an invalid large value. In
such situation, empty_space will be bigger than the space actually
available. Since new_wr_idx is not checked, so the following code will
result in an OOB write.
...
qsize = qhdr->q_size

if (wr_idx >= rd_idx)
 empty_space = qsize - (wr_idx - rd_idx)
....
if (new_wr_idx < qsize) {
 memcpy(wr_ptr, packet, dwords << 2) --> OOB write

Add check to ensure qsize is within the allocated size while
reading and writing packets into the queue.

Cc: stable@vger.kernel.org
Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: venus: hfi: add a check to handle OOB in sfr region

commit f4b211714bcc70effa60c34d9fa613d182e3ef1e upstream.

sfr->buf_size is in shared memory and can be modified by malicious user.
OOB write is possible when the size is made higher than actual sfr data
buffer. Cap the size to allocated size for such cases.

Cc: stable@vger.kernel.org
Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: intel/ipu6: set the dev_parent of video device to pdev

commit 6f0ab5d3671f7cbb326c8cab6fb69cb7ab9901cc upstream.

The bus_info in v4l2_capability of IPU6 isys v4l2_dev is missing.
The driver didn't set the dev_parent of v4l2_dev, its parent is set
to its parent auxdev which is neither platform nor PCI device, thus
media_set_bus_info() will not set the bus_info of v4l2_capability, then
`v4l2-ctl --all` cannot show the bus_info.

This patch fixes it by setting the dev_parent of video_device and v4l2
framework can detect the device type and set the bus_info instead.

Fixes: 3c1dfb5a69cf ("media: intel/ipu6: input system video nodes and buffer queues")
Cc: stable@vger.kernel.org
Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mgb4: Fix switched CMT frequency range "magic values" sets

commit 450acf0840232eaf6eb7a80da11cf492e57498e8 upstream.

The reason why this passed unnoticed is that most infotainment systems
use frequencies near enough the middle (50MHz) where both sets work.

Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: i2c: adv748x: Fix test pattern selection mask

commit 9e38acacb9d809b97a0bdc5c76e725355a47158a upstream.

The mask to select the test-pattern in register ADV748X_SDP_FRP is
incorrect, it's the lower 3 bits which controls the pattern. The
GENMASK() macro is used incorrectly and the generated mask is 0x0e
instead of 0x07.

The result is that not all test patterns are selectable, and that in
some cases the wrong test pattern is activated. Fix this by correcting
the GENMASK().

Fixes: 3e89586a64df ("media: i2c: adv748x: add adv748x driver")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fixed tiny typo in commit log: my -> by]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mgb4: Fix CMT registers update logic

commit dd05443189f9ae175dd806594b67bf55ddb6539e upstream.

The CMT "magic values" registers must be updated while the CMT reset
registers are active.

Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: uapi: rkisp1-config: Fix typo in extensible params example

commit 7b0ee2de7c76e5518e2235a927fd211bc785d320 upstream.

The define used for the version in the example diagram does not match what
is defined in enum rksip1_ext_param_buffer_version, nor the description
above it. Correct the typo to make it clear which define to use.

Fixes: e9d05e9d5db1 ("media: uapi: rkisp1-config: Add extensible params format")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mtk-vcodec: venc: avoid -Wenum-compare-conditional warning

commit 07df4f23ef3ffe6fee697cd2e03623ad27108843 upstream.

This is one of three clang warnings about incompatible enum types
in a conditional expression:

drivers/media/platform/mediatek/vcodec/encoder/venc/venc_h264_if.c:597:29: error: conditional expression between different enumeration types ('enum scp_ipi_id' and 'enum ipi_id') [-Werror,-Wenum-compare-conditional]
  597 |         inst->vpu_inst.id = is_ext ? SCP_IPI_VENC_H264 : IPI_VENC_H264;
      |                                    ^ ~~~~~~~~~~~~~~~~~   ~~~~~~~~~~~~~

The code is correct, so just rework it to avoid the warning.

Fixes: 0dc4b3286125 ("media: mtk-vcodec: venc: support SCP firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@google.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mediatek: vcodec: Fix a resource leak related to the scp device in FW initialization

commit 4936cd5817af35d23e4d283f48fa59a18ef481e4 upstream.

On Mediatek devices with a system companion processor (SCP) the mtk_scp
structure has to be removed explicitly to avoid a resource leak.
Free the structure in case the allocation of the firmware structure fails
during the firmware initialization.

Fixes: 53dbe0850444 ("media: mtk-vcodec: potential null pointer deference in SCP")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: media: st,stmipid02: correct lane-polarities maxItems

commit 3a544a39e0a4c492e3026dfbed018321d2bd6caa upstream.

The MIPID02 can use up to 2 data lanes which leads to having a maximum
item number of 3 for the lane-polarities since this also contains the
clock lane.

CC: stable@vger.kernel.org
Fixes: c2741cbe7f8a ("dt-bindings: media: st,stmipid02: Convert the text bindings to YAML")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

auxdisplay: hd44780: Fix an API misuse in hd44780.c

commit 9b98a7d2e5f4e2beeff88f6571da0cdc5883c7fb upstream.

Variable allocated by charlcd_alloc() should be released
by charlcd_free(). The following patch changed kfree() to
charlcd_free() to fix an API misuse.

Fixes: 718e05ed92ec ("auxdisplay: Introduce hd44780_common.[ch]")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: pidff: Fix set_device_control()

[ Upstream commit e2fa0bdf08a70623f24ed52f2037a330999d9800 ]

As the search for Device Control report is permissive, make sure the
desired field was actually found, before trying to set it.

Fix bitmask clearing as it was erronously using index instead of
index - 1 (HID arrays index is 1-based).

Add last two missing Device Control usages to the defined array.
PID_PAUSE and PID_CONTINUE.

Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Fix 90 degrees direction name North -> East

[ Upstream commit f98ecedbeca34a8df1460c3a03cce32639c99a9d ]

Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff

[ Upstream commit 1a575044d516972a1d036d54c0180b9085e21dc6 ]

As per USB PID standard:
INFINITE - Referrers to the maximum value of a range. i.e. if in an 8
bit unsigned field the value of 255 would indicate INFINITE.

Detecting 0xffff (U16_MAX) is still important as we MIGHT get this value
as infinite from some native software as 0 was never actually defined
in Linux' FF api as the infinite value. I'm working on it though.

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Clamp effect playback LOOP_COUNT value

[ Upstream commit 0c6673e3d17b258b8c5c7331d28bf6c49f25ed30 ]

Ensures the loop count will never exceed the logical_maximum.

Fixes implementation errors happening when applications use the max
value of int32/DWORD as the effect iterations. This could be observed
when running software both native and in wine.

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Rename two functions to align them with naming convention

[ Upstream commit bbeface1051142bcb0473fdcc89102ea5b31607d ]

Driver uses "set" everywhere to indicate setting report values and
requesting HID_REQ_SET_REPORT

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Remove redundant call to pidff_find_special_keys

[ Upstream commit 1bd55e79cbc0ea2d6a65f51e06c891806359c2f2 ]

Probably left out as a mistake after Anssi created the helper macro

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Support device error response from PID_BLOCK_LOAD

[ Upstream commit 9d4174dc4a234408d91fd83725e1899766cd1731 ]

If an error happens on the device, the driver will no longer fall
into the trap of reading this status 60 times before it decides that
this reply won't change to success/memory full.

Greatly reduces communication overhead during device error situation.

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Comment and code style update

[ Upstream commit e19675c2477491401b236ed939ad5a43ddc339af ]

Update comments to fully conform to the Linux comment styling.
Define Linux infinite effect duration (0) as FF_INFINITE

Chanage Oleg's name order

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: hid-universal-pidff: Add Asetek wheelbases support

[ Upstream commit c385f61108d403633e8cfbdae15b35ccf7cee686 ]

Adds Asetek vendor id and product ids for:
- Invicta
- Forte
- La Prima
- Tony Kanaan

v2:
- Misc spelling fix in driver loaded info

v3:
- Chanage Oleg's name order

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Make sure to fetch pool before checking SIMULTANEOUS_MAX

[ Upstream commit 1f650dcec32d22deb1d6db12300a2b98483099a9 ]

As noted by Anssi some 20 years ago, pool report is sometimes messed up.
This worked fine on many devices but casued oops on VRS DirectForce PRO.

Here, we're making sure pool report is refetched before trying to access
any of it's fields. While loop was replaced with a for loop + exit
conditions were moved aroud to decrease the possibility of creating an
infinite loop scenario.

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Factor out pool report fetch and remove excess declaration

[ Upstream commit 5d98079b2d0186e1f586301a9c00144a669416a8 ]

We only want to refetch the pool report during device init. Reset
function is now called when uploading effects to an empty device so
extract pool fetch to separate function and call it from init before
autocenter check (autocenter check triggered reset during init).

Remove a superfluous pointer declaration and assigment as well.

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Use macros instead of hardcoded min/max values for shorts

[ Upstream commit 21755162456902998f8d9897086b8c980c540df5 ]

Makes it obvious these magic values ARE in fact derived from min and
max values for s16 and u16

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Simplify pidff_rescale_signed

[ Upstream commit 4eb9c2ee538b62dc5dcae192297c3a4044b7ade5 ]

This function overrelies on ternary operators and makes it hard to parse
it mentally. New version makes it very easy to understand.

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Move all hid-pidff definitions to a dedicated header

[ Upstream commit 0d24d4b1da96df9fc5ff36966f40f980ef864d46 ]

Do not clutter hid includes with stuff not needed outside of
the kernel.

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Factor out code for setting gain

[ Upstream commit f7ebf0b11b9e04bf59c438ad14f0115b12aa2f44 ]

Makes it possible to easily set gain from inside hid-pidff.c

Changes in v7:
- Check if device gain field exists before setting device gain

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Rescale time values to match field units

[ Upstream commit 8713107221a8ce4021ec5fa12bb50ecc8165cf08 ]

PID devices can use different exponents for time fields, while Linux
Force Feedback API only supports miliseconds.

Read the exponent of a given time field and scale its value accordingly.

Changes in v7:
- Rescale all time fields, not only period

changes in v9:
- Properly assign fade_lenght, not attack_length to PID_FADE_TIME

Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Define values used in pidff_find_special_fields

[ Upstream commit 1c12f136891cf4d2d4e6aa202d671a9d2171a716 ]

Makes it clear where did these values came from

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Simplify pidff_upload_effect function

[ Upstream commit e4bdc80ef14272ef56c38d8ca2f365fdf59cd0ba ]

Merge a bit of code that reqeusts conditional effects upload.
Makes it clear, that effect handling should be identical for
SPRING, DAMPER, INERTIA and FRICTION.

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Completely rework and fix pidff_reset function

[ Upstream commit cb3fd788e3fa5358602a49809c4eb4911539c9d0 ]

Previously, it was assumed that DEVICE_CONTROL usage is always an array
but a lot of devices implements it as a bitmask variable. This led to
the pidff_reset function not working and causing errors in such cases.

Selectors can come in three types. One selection of a set, N selections
and Any selection in form of bitmask as from USB Hid Usage Tables v1.5,
subsection 3.4.2.1

Added pidff_send_device_control which handles usage flag check which
decides whether DEVICE_CONTROL should be handled as "One selection of a
set" or "Any selection of a set".

Reset was triggered once, on device initialization. Now, it's triggered
every time when uploading an effect to an empty device (no currently
stored effects), tracked by pidff->effect_count variable.

Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Stop all effects before enabling actuators

[ Upstream commit ce52c0c939fcb568d1abe454821d5623de38b424 ]

Some PID compliant devices automatically play effects after boot (i.e.
autocenter spring) that prevent the rendering of other effects since
it is done outside the kernel driver.

This makes sure all the effects currently played are stopped after
resetting the device.
It brings compatibility to the Brunner CLS-P joystick and others

Reported-by: Jules Noirant <jules.noirant@orange.fr>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: pidff: Clamp PERIODIC effect period to device's logical range

[ Upstream commit f538183e997a9fb6087e94e71e372de967b9e56a ]

This ensures the effect can actually be played on the connected force
feedback device. Adds clamping functions used instead of rescaling, as we
don't want to change the characteristics of the periodic effects.

Fixes edge cases found on Moza Racing and some other hardware where
the effects would not play if the period is outside the defined
logical range.

Changes in v6:
- Use in-kernel clamp macro instead of a custom solution

Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/pci: Fix s390_mmio_read/write syscall page fault handling

[ Upstream commit 41a0926e82f4963046876ed9a1b5f681be8087a8 ]

The s390 MMIO syscalls when using the classic PCI instructions do not
cause a page fault when follow_pfnmap_start() fails due to the page not
being present. Besides being a general deficiency this breaks vfio-pci's
mmap() handling once VFIO_PCI_MMAP gets enabled as this lazily maps on
first access. Fix this by following a failed follow_pfnmap_start() with
fixup_user_page() and retrying the follow_pfnmap_start(). Also fix
a VM_READ vs VM_WRITE mixup in the read syscall.

Link: https://lore.kernel.org/r/20250226-vfio_pci_mmap-v7-1-c5c0f1d26efd@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: don't treat fhandle lookup of ea_inode as FS corruption

[ Upstream commit 642335f3ea2b3fd6dba03e57e01fa9587843a497 ]

A file handle that userspace provides to open_by_handle_at() can
legitimately contain an outdated inode number that has since been reused
for another purpose - that's why the file handle also contains a generation
number.

But if the inode number has been reused for an ea_inode, check_igot_inode()
will notice, __ext4_iget() will go through ext4_error_inode(), and if the
inode was newly created, it will also be marked as bad by iget_failed().
This all happens before the point where the inode generation is checked.

ext4_error_inode() is supposed to only be used on filesystem corruption; it
should not be used when userspace just got unlucky with a stale file
handle. So when this happens, let __ext4_iget() just return an error.

Fixes: b3e6bcb94590 ("ext4: add EA_INODE checking to ext4_iget()")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241129-ext4-ignore-ea-fhandle-v1-1-e532c0d1cee0@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags

[ Upstream commit d4bac0288a2b444e468e6df9cb4ed69479ddf14a ]

Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to
read when these offsets extend into frags.

This has been observed with iwlwifi and reproduced with tun with
IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port,
applied to a RAW socket, will silently miss matching packets.

    const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt);
    const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest);
    struct sock_filter filter_code[] = {
            BPF_STMT(BPF_LD  + BPF_B   + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE),
            BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4),
            BPF_STMT(BPF_LD  + BPF_B   + BPF_ABS, SKF_NET_OFF + offset_proto),
            BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2),
            BPF_STMT(BPF_LD  + BPF_H   + BPF_ABS, SKF_NET_OFF + offset_dport),

This is unexpected behavior. Socket filter programs should be
consistent regardless of environment. Silent misses are
particularly concerning as hard to detect.

Use skb_copy_bits for offsets outside linear, same as done for
non-SKF_(LL|NET) offsets.

Offset is always positive after subtracting the reference threshold
SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of
the two is an offset against skb->data, and may be negative, but it
cannot point before skb->head, as skb_(mac|network)_offset would too.

This appears to go back to when frag support was introduced to
sk_run_filter in linux-2.4.4, before the introduction of git.

The amount of code change and 8/16/32 bit duplication are unfortunate.
But any attempt I made to be smarter saved very few LoC while
complicating the code.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/
Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244
Reported-by: Matt Moeller <moeller.matt@gmail.com>
Co-developed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

erofs: set error to bio if file-backed IO fails

[ Upstream commit 1595f15391b81815e4ef91c339991913d556c1b6 ]

If a file-backed IO fails before submitting the bio to the lower
filesystem, an error is returned, but the bio->bi_status is not
marked as an error. However, the error information should be passed
to the end_io handler. Otherwise, the IO request will be treated as
successful.

Fixes: 283213718f5d ("erofs: support compressed inodes for fileio")
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250408122351.2104507-1-shengyong1@xiaomi.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: fsl-ftm: Handle clk_get_rate() returning 0

[ Upstream commit 928446a5302eee30ebb32075c0db5dda5a138fb7 ]

Considering that the driver doesn't enable the used clocks (and also
that clk_get_rate() returns 0 if CONFIG_HAVE_CLK is unset) better check
the return value of clk_get_rate() for being non-zero before dividing by
it.

Fixes: 3479bbd1e1f8 ("pwm: fsl-ftm: More relaxed permissions for updating period")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b68351a51017035651bc62ad3146afcb706874f0.1743501688.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: rcar: Improve register calculation

[ Upstream commit e7327c193014a4d8666e9c1cda09cf2c060518e8 ]

There were several issues in the function rcar_pwm_set_counter():

 - The u64 values period_ns and duty_ns were cast to int on function
   call which might loose bits on 32 bit architectures.
   Fix: Make parameters to rcar_pwm_set_counter() u64
 - The algorithm divided by the result of a division which looses
   precision.
   Fix: Make use of mul_u64_u64_div_u64()
 - The calculated values were just masked to fit the respective register
   fields which again might loose bits.
   Fix: Explicitly check for overlow

Implement the respective fixes.

A side effect of fixing the 2nd issue is that there is no division by 0
if clk_get_rate() returns 0.

Fixes: ed6c1476bf7f ("pwm: Add support for R-Car PWM Timer")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/ab3dac794b2216cc1cc56d65c93dd164f8bd461b.1743501688.git.u.kleine-koenig@baylibre.com
[ukleinek: Added an explicit #include <linux/bitfield.h> to please the
0day build bot]
Link: https://lore.kernel.org/oe-kbuild-all/202504031354.VJtxScP5-lkp@intel.com/
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()

[ Upstream commit 7ca59947b5fcf94e7ea4029d1bd0f7c41500a161 ]

With CONFIG_COMPILE_TEST && !CONFIG_HAVE_CLK, pwm_mediatek_config() has a
divide-by-zero in the following line:

do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm]));

due to the fact that the !CONFIG_HAVE_CLK version of clk_get_rate()
returns zero.

This is presumably just a theoretical problem: COMPILE_TEST overrides
the dependency on RALINK which would select COMMON_CLK.  Regardless it's
a good idea to check for the error explicitly to avoid divide-by-zero.

Fixes the following warning:

  drivers/pwm/pwm-mediatek.o: warning: objtool: .text: unexpected end of section

Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/fb56444939325cc173e752ba199abd7aeae3bf12.1742852847.git.jpoimboe@kernel.org
[ukleinek: s/CONFIG_CLK/CONFIG_HAVE_CLK/]
Fixes: caf065f8fd58 ("pwm: Add MediaTek PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/9e78a0796acba3435553ed7db1c7965dcffa6215.1743501688.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm: End any active auth session before shutdown

[ Upstream commit 1dbf74e00a5f882b04b398399b6def65cd51ef21 ]

Lazy flushing of TPM auth sessions can interact badly with IMA + kexec,
resulting in loaded session handles being leaked across the kexec and
not cleaned up. Fix by ensuring any active auth session is ended before
the TPM is told about the shutdown, matching what is done when
suspending.

Before:

root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~# kexec --load --kexec-file-syscall …
root@debian-qemu-efi:~# systemctl kexec
…
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
- 0x2000000
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#
(repeat kexec steps)
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
- 0x2000000
- 0x2000001
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#

After:

root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~# kexec --load --kexec-file-syscall …
root@debian-qemu-efi:~# systemctl kexec
…
root@debian-qemu-efi:~# tpm2_getcap handles-loaded-session
root@debian-qemu-efi:~# tpm2_getcap handles-saved-session
root@debian-qemu-efi:~#

Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm, tpm_tis: Workaround failed command reception on Infineon devices

[ Upstream commit de9e33df7762abbfc2a1568291f2c3a3154c6a9d ]

Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.

This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.

Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:

  https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go

It can take several hours to reproduce, and several million operations.

Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ktest: Fix Test Failures Due to Missing LOG_FILE Directories

[ Upstream commit 5a1bed232781d356f842576daacc260f0d0c8d2e ]

Handle missing parent directories for LOG_FILE path to prevent test
failures. If the parent directories don't exist, create them to ensure
the tests proceed successfully.

Cc: <warthog9@eaglescrag.net>
Link: https://lore.kernel.org/20250307043854.2518539-1-Ayush.jain3@amd.com
Signed-off-by: Ayush Jain <Ayush.jain3@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: probe-events: Add comments about entry data storing code

[ Upstream commit bb9c6020f4c3a07a90dc36826cb5fbe83f09efd5 ]

Add comments about entry data storing code to __store_entry_arg() and
traceprobe_get_entry_data_size(). These are a bit complicated because of
building the entry data storing code and scanning it.

This just add comments, no behavior change.

Link: https://lore.kernel.org/all/174061715004.501424.333819546601401102.stgit@devnote2/
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20250226102223.586d7119@gandalf.local.home/
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: omapfb: Add 'plane' value check

[ Upstream commit 3e411827f31db7f938a30a3c7a7599839401ec30 ]

Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.

The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.

For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.

For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.

Add check for this value.

Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.

Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: grab an additional reference on the gang fence v2

[ Upstream commit 0d9a95099dcb05b5f4719c830d15bf4fdcad0dc2 ]

We keep the gang submission fence around in adev, make sure that it
stays alive.

v2: fix memory leak on retry

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type

[ Upstream commit 18056a48669a040bef491e63b25896561ee14d90 ]

The access to the PCI config space via pci_ops::read and pci_ops::write is
a low-level hardware access. The functions can be accessed with disabled
interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this
purpose.

A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be
acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in
the same context as the pci_lock.

Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with
interrupts disabled.

This was reported as:

  BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
  Call Trace:
   rt_spin_lock+0x4e/0x130
   vmd_pci_read+0x8d/0x100 [vmd]
   pci_user_read_config_byte+0x6f/0xe0
   pci_read_config+0xfe/0x290
   sysfs_kf_bin_read+0x68/0x90

Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Tested-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Acked-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
[bigeasy: reword commit message]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/r/20250218080830.ufw3IgyX@linutronix.de
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: add back report info from
https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Check BAR index for validity

[ Upstream commit b1a7f99967fc0c052db8e65b449c7b32b1e9177f ]

Many functions in PCI use accessor macros such as pci_resource_len(),
which take a BAR index. That index, however, is never checked for
validity, potentially resulting in undefined behavior by overflowing the
array pci_dev.resource in the macro pci_resource_n().

Since many users of those macros directly assign the accessed value to
an unsigned integer, the macros cannot be changed easily anymore to
return -EINVAL for invalid indexes. Consequently, the problem has to be
mitigated in higher layers.

Add pci_bar_index_valid(). Use it where appropriate.

Link: https://lore.kernel.org/r/20250312080634.13731-4-phasta@kernel.org
Closes: https://lore.kernel.org/all/adb53b1f-29e1-3d14-0e61-351fd2d3ff0d@linux.intel.com/
Reported-by: Bingbu Cao <bingbu.cao@linux.intel.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
[kwilczynski: correct if-statement condition the pci_bar_index_is_valid()
helper function uses, tidy up code comments]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: fix typo]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix the race condition for draining retry fault

[ Upstream commit f844732e3ad9c4b78df7436232949b8d2096d1a6 ]

Issue:
In the scenario where svm_range_restore_pages is called, but
svm->checkpoint_ts has not been set and the retry fault has not been
drained, svm_range_unmap_from_cpu is triggered and calls svm_range_free.
Meanwhile, svm_range_restore_pages continues execution and reaches
svm_range_from_addr. This results in a "failed to find prange..." error,
 causing the page recovery to fail.

How to fix:
Move the timestamp check code under the protection of svm->lock.

v2:
Make sure all right locks are released before go out.

v3:
Directly goto out_unlock_svms, and return -EAGAIN.

v4:
Refine code.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Enable Configuration RRS SV early

[ Upstream commit 3f8c4959fc18e477801386a625e726c59f52a2c4 ]

Following a reset, a Function may respond to Config Requests with Request
Retry Status (RRS) Completion Status to indicate that it is temporarily
unable to process the Request, but will be able to process the Request in
the future (PCIe r6.0, sec 2.3.1).

If the Configuration RRS Software Visibility feature is enabled and a Root
Complex receives RRS for a config read of the Vendor ID, the Root Complex
completes the Request to the host by returning PCI_VENDOR_ID_PCI_SIG,
0x0001 (sec 2.3.2).

The Config RRS SV feature applies only to Root Ports and is not directly
related to pci_scan_bridge_extend().  Move the RRS SV enable to
set_pcie_port_type() where we handle other PCIe-specific configuration.

Link: https://lore.kernel.org/r/20250303210217.199504-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: handle amdgpu_cgs_create_device() errors in amd_powerplay_create()

[ Upstream commit 1435e895d4fc967d64e9f5bf81e992ac32f5ac76 ]

Add error handling to propagate amdgpu_cgs_create_device() failures
to the caller. When amdgpu_cgs_create_device() fails, release hwmgr
and return -ENOMEM to prevent null pointer dereference.

[v1]->[v2]: Change error code from -EINVAL to -ENOMEM. Free hwmgr.

Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add Rockchip Vendor ID

[ Upstream commit 20bbb083bbc9d3f8db390f2e35e168f1b23dae8a ]

Move PCI_VENDOR_ID_ROCKCHIP from pci_endpoint_test.c to pci_ids.h and
reuse it in pcie-rockchip-host.c.

Link: https://lore.kernel.org/r/20250218092120.2322784-2-cassel@kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: mtk_dpi: Explicitly manage TVD clock in power on/off

[ Upstream commit 473c33f5ce651365468503c76f33158aaa1c7dd2 ]

In preparation for adding support for MT8195's HDMI reserved
DPI, add calls to clk_prepare_enable() / clk_disable_unprepare()
for the TVD clock: in this particular case, the aforementioned
clock is not (and cannot be) parented to neither pixel or engine
clocks hence it won't get enabled automatically by the clock
framework.

Please note that on all of the currently supported MediaTek
platforms, the TVD clock is always a parent of either pixel or
engine clocks, and this means that the common clock framework
is already enabling this clock before the children.
On such platforms, this commit will only increase the refcount
of the TVD clock without any functional change.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: mtk_dpi: Move the input_2p_en bit to platform data

[ Upstream commit c90876a695dd83e76680b88b40067275a5982811 ]

In preparation for adding support for MT8195's HDMI reserved DPI
instance, move the input_2p_en bit for DP_INTF to platform data.

While at it, remove the input_2pixel member from platform data as
having this bit implies that the 2pixel feature must be enabled.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-7-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/xe/xelp: Move Wa_16011163337 from tunings to workarounds

[ Upstream commit d9b5d83c5a4d720af6ddbefe2825c78f0325a3fd ]

Workaround database specifies 16011163337 as a workaround so lets move it
there.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-3-tvrtko.ursulin@igalia.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: debugfs hang_hws skip GPU with MES

[ Upstream commit fe9d0061c413f8fb8c529b18b592b04170850ded ]

debugfs hang_hws is used by GPU reset test with HWS, for MES this crash
the kernel with NULL pointer access because dqm->packet_mgr is not setup
for MES path.

Skip GPU with MES for now, MES hang_hws debugfs interface will be
supported later.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix pqm_destroy_queue race with GPU reset

[ Upstream commit 7919b4cad5545ed93778f11881ceee72e4dbed66 ]

If GPU in reset, destroy_queue return -EIO, pqm_destroy_queue should
delete the queue from process_queue_list and free the resource.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix mode1 reset crash issue

[ Upstream commit f0b4440cdc1807bb6ec3dce0d6de81170803569b ]

If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal
user space to abort the processes. After process abort exit, user queues
still use the GPU to access system memory before h/w is reset while KFD
cleanup worker free system memory and free VRAM.

There is use-after-free race bug that KFD allocate and reuse the freed
system memory, and user queue write to the same system memory to corrupt
the data structure and cause driver crash.

To fix this race, KFD cleanup worker terminate user queues, then flush
reset_domain wq to wait for any GPU ongoing reset complete, and then
free outstanding BOs.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: clamp queue size to minimum

[ Upstream commit e90711946b53590371ecce32e8fcc381a99d6333 ]

If queue size is less than minimum, clamp it to minimum to prevent
underflow when writing queue mqd.

Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: devres: Allow to release group on device release

[ Upstream commit 8e1ddfada4530939a8cb64ee9251aef780474274 ]

When releasing a device, if the release action causes a group to be
released, a warning is emitted because it can't find the group. This
happens because devres_release_all() moves the entire list to a todo
list and also move the group markers. Considering r* normal resource
nodes and g1 a group resource node:

    g1 -----------.
    v   v
r1 -> r2 -> g1[0] -> r3-> g[1] -> r4

After devres_release_all(), dev->devres_head becomes empty and the todo
list it iterates on becomes:

       g1
       v
r1 -> r2 -> r3-> r4 -> g1[0]

When a call to component_del() is made and takes down the aggregate
device, a warning like this happen:

RIP: 0010:devres_release_group+0x362/0x530
...
Call Trace:
 <TASK>
 component_unbind+0x156/0x380
 component_unbind_all+0x1d0/0x270
 mei_component_master_unbind+0x28/0x80 [mei_hdcp]
 take_down_aggregate_device+0xc1/0x160
 component_del+0x1c6/0x3e0
 intel_hdcp_component_fini+0xf1/0x170 [xe]
 xe_display_fini+0x1e/0x40 [xe]

Because the devres group corresponding to the hdcp component cannot be
found. Just ignore this corner case: if the dev->devres_head is empty
and the caller is trying to remove a group, it's likely in the process
of device cleanup so just ignore it instead of warning.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250222001051.3012936-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: stop DML2 from removing pipes based on planes

[ Upstream commit 8adeff83a3b07fa6d0958ed51e1b38ba7469e448 ]

[Why]
Transitioning from low to high resolutions at high refresh rates caused grey corruption.
During the transition state, there is a period where plane size is based on low resultion
state and ODM slices are based on high resoultion state, causing the entire plane to be
contained in one ODM slice. DML2 would turn off the pipe for the ODM slice with no plane,
causing an underflow since the pixel rate for the higher resolution cannot be supported on
one pipe. This change stops DML2 from turning off pipes that are mapped to an ODM slice
with no plane. This is possible to do without negative consequences because pipes can now
take the minimum viewport and draw with zero recout size, removing the need to have the
pipe turned off.

[How]
In map_pipes_from_plane(), remove "check" that skips ODM slices that are not covered by
the plane. This prevents the pipes for those ODM slices from being freed.

Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: panel: forbid initializing a panel with unknown connector type

[ Upstream commit b296955b3a740ecc8b3b08e34fd64f1ceabb8fb4 ]

Having an DRM_MODE_CONNECTOR_Unknown connector type is considered bad, and
drm_panel_bridge_add_typed() and derivatives are deprecated for this.

drm_panel_init() won't prevent initializing a panel with a
DRM_MODE_CONNECTOR_Unknown connector type. Luckily there are no in-tree
users doing it, so take this as an opportinuty to document a valid
connector type must be passed.

Returning an error if this rule is violated is not possible because
drm_panel_init() is a void function. Add at least a warning to make any
violations noticeable, especially to non-upstream drivers.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-5-88ca5827d7af@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/debugfs: fix printk format for bridge index

[ Upstream commit 72443c730b7a7b5670a921ea928e17b9b99bd934 ]

idx is an unsigned int, use %u for printk-style strings.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-1-88ca5827d7af@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for OneXPlayer Mini (Intel)

[ Upstream commit b24dcc183583fc360ae0f0899e286a68f46abbd0 ]

The Intel model of the OneXPlayer Mini uses a 1200x1920 portrait LCD panel.
The DMI strings are the same as the OneXPlayer, which already has a DMI
quirk, but the panel is different.

Add a DMI match to correctly rotate this panel.

Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Co-developed-by: John Edwards <uejji@uejji.net>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: João Pedro Kurtz <joexkurtz@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-6-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add new quirk for GPD Win 2

[ Upstream commit a860eb9c6ba6cdbf32e3e01a606556e5a90a2931 ]

Some GPD Win 2 units shipped with the correct DMI strings.

Add a DMI match to correctly rotate the panel on these units.

Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: Paco Avelar <pacoavelar@hotmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-5-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for AYA NEO Slide

[ Upstream commit 132c89ef8872e602cfb909377815111d121fe8d7 ]

The AYANEO Slide uses a 1080x1920 portrait LCD panel.  This is the same
panel used on the AYANEO Air Plus, but the DMI data is too different to
match both with one entry.

Add a DMI match to correctly rotate the panel on the AYANEO Slide.

This also covers the Antec Core HS, which is a rebranded AYANEO Slide with
the exact same hardware and DMI strings.

Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: John Edwards <uejji@uejji.net>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-4-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirks for AYA NEO Flip DS and KB

[ Upstream commit 529741c331da1fbf54f86c6ec3a4558b9b0b16dc ]

The AYA NEO Flip DS and KB both use a 1080x1920 portrait LCD panel.  The
Flip DS additionally uses a 640x960 portrait LCD panel as a second display.

Add DMI matches to correctly rotate these panels.

Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Co-developed-by: John Edwards <uejji@uejji.net>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: Paco Avelar <pacoavelar@hotmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-3-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add support for AYANEO 2S

[ Upstream commit eb8f1e3e8ee10cff591d4a47437dfd34d850d454 ]

AYANEO 2S uses the same panel and orientation as the AYANEO 2.

Update the AYANEO 2 DMI match to also match AYANEO 2S.

Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: John Edwards <uejji@uejji.net>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-2-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Unlocked unmap only clear page table leaves

[ Upstream commit 23b645231eeffdaf44021debac881d2f26824150 ]

SVM migration unmap pages from GPU and then update mapping to GPU to
recover page fault. Currently unmap clears the PDE entry for range
length >= huge page and free PTB bo, update mapping to alloc new PT bo.
There is race bug that the freed entry bo maybe still on the pt_free
list, reused when updating mapping and then freed, leave invalid PDE
entry and cause GPU page fault.

By setting the update to clear only one PDE entry or clear PTB, to
avoid unmap to free PTE bo. This fixes the race bug and improve the
unmap and map to GPU performance. Update mapping to huge page will
still free the PTB bo.

With this change, the vm->pt_freed list and work is not needed. Add
WARN_ON(unlocked) in amdgpu_vm_pt_free_dfs to catch if unmap to free the
PTB.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Update Cursor request mode to the beginning prefetch always

[ Upstream commit 4a4077b4b63a8404efd6d37fc2926f03fb25bace ]

[Why]
The double buffer cursor registers is updated by the cursor
vupdate event. There is a gap between vupdate and cursor data
fetch if cursor fetch data reletive to cursor position.
Cursor corruption will happen if we update the cursor surface
in this gap.

[How]
Modify the cursor request mode to the beginning prefetch always
and avoid wraparound calculation issues.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/xe/vf: Don't try to trigger a full GT reset if VF

[ Upstream commit 459777724d306315070d24608fcd89aea85516d6 ]

VFs don't have access to the GDRST(0x941c) register that driver
uses to reset a GT. Attempt to trigger a reset using debugfs:

 $ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset

or due to a hang condition detected by the driver leads to:

 [ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe]
 [ ] xe 0000:00:02.1: [drm] GT0: reset queued
 [ ] xe 0000:00:02.1: [drm] GT0: reset started
 [ ] ------------[ cut here ]------------
 [ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0
 [ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
 [ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
 [ ] Call Trace:
 [ ]  <TASK>
 [ ]  ? show_regs+0x6c/0x80
 [ ]  ? __warn+0x93/0x1c0
 [ ]  ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
 [ ]  ? report_bug+0x182/0x1b0
 [ ]  ? handle_bug+0x6e/0xb0
 [ ]  ? exc_invalid_op+0x18/0x80
 [ ]  ? asm_exc_invalid_op+0x1b/0x20
 [ ]  ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
 [ ]  ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
 [ ]  ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe]
 [ ]  ? __mutex_unlock_slowpath+0x41/0x2e0
 [ ]  xe_mmio_write32+0x64/0x150 [xe]
 [ ]  do_gt_reset+0x2f/0xa0 [xe]
 [ ]  gt_reset_worker+0x14e/0x1e0 [xe]
 [ ]  process_one_work+0x21c/0x740
 [ ]  worker_thread+0x1db/0x3c0

Fix that by sending H2G VF_RESET(0x5507) action instead.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4078
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131182502.852-1-michal.wajdeczko@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/xe/bmg: Add new PCI IDs

[ Upstream commit fa8ffaae1b15236b8afb0fbbc04117ff7c900a83 ]

Add 3 new PCI IDs for BMG.

v2: Fix typo -> Replace '.' with ','

Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128162015.3288675-1-shekhar.chauhan@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: allow encoder mode_set even when connectors change for crtc

[ Upstream commit 7e182cb4f5567f53417b762ec0d679f0b6f0039d ]

In certain use-cases, a CRTC could switch between two encoders
and because the mode being programmed on the CRTC remains
the same during this switch, the CRTC's mode_changed remains false.
In such cases, the encoder's mode_set also gets skipped.

Skipping mode_set on the encoder for such cases could cause an issue
because even though the same CRTC mode was being used, the encoder
type could have changed like the CRTC could have switched from a
real time encoder to a writeback encoder OR vice-versa.

Allow encoder's mode_set to happen even when connectors changed on a
CRTC and not just when the mode changed.

Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211-abhinavk-modeset-fix-v3-1-0de4bf3e7c32@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE

[ Upstream commit 127881334eaad639e0a19a399ee8c91d6c9dc982 ]

Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_PAGE_SCAN_TYPE.

Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Add quirk for broken READ_VOICE_SETTING

[ Upstream commit ff26b2dd6568392f60fa67a4e58279938025c3af ]

Some fake controllers cannot be initialized because they return a smaller
report than expected for READ_VOICE_SETTING.

Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: qca: simplify WCN399x NVM loading

[ Upstream commit 1cc41b5092e3aa511454ec882c525af311bee631 ]

The WCN399x code has two separate cases for loading the NVM data. In
preparation to adding support for WCN3950, which also requires similar
quirk, split the "variant" to be specified explicitly and merge two
snprintfs into a single one.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: use the power sequencer for wcn6750

[ Upstream commit 852cfdc7a5a5af54358325c1e0f490cc178d9664 ]

Older boards are having entry "enable-gpios" in dts, we can safely assume
latest boards which are supporting PMU node enrty will support power
sequencer.

Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Add 2 HWIDs for MT7922

[ Upstream commit a88643b7e48506777e175e80c902c727ddd90851 ]

Add below HWIDs for MediaTek MT7922 USB Bluetooth chip.
VID 0x0489, PID 0xe152
VID 0x0489, PID 0xe153

Patch has been tested successfully and controller is recognized
device pair successfully.

MT7922 module bring up message as below.
Bluetooth: Core ver 2.22
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
Bluetooth: hci0: Device setup in 2284925 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
Bluetooth: hci0: AOSP extensions version v1.00
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11

Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_uart: fix race during initialization

[ Upstream commit 366ceff495f902182d42b6f41525c2474caf3f9a ]

'hci_register_dev()' calls power up function, which is executed by
kworker - 'hci_power_on()'. This function does access to bluetooth chip
using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'.
Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and
if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after
'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will
be executed before setting this bit. In that case HCI init logic fails.

Patch moves setting of 'HCI_UART_PROTO_READY' before calling function
'hci_uart_register_dev()'.

Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btintel_pcie: Add device id of Whale Peak

[ Upstream commit 6b8c05e52d66e4fe4ab1df4c6e15f339ecd9aa51 ]

Add device of Whale Peak.

Output of sudo lspci -v  -s 00:14.7:

00:14.7 Bluetooth: Intel Corporation Device e476
        Subsystem: Intel Corporation Device 0011
        Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 11
        Memory at 11011c30000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 3
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [80] MSI-X: Enable+ Count=32 Masked-
        Capabilities: [100] Latency Tolerance Reporting
        Kernel driver in use: btintel_pcie
        Kernel modules: btintel_pcie

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER

[ Upstream commit 0c588ac0ca6c22b774d9ad4a6594681fdfa57d9d ]

When __ftrace_event_enable_disable invokes the class callback to
unregister the event, the return value is not reported up to the
caller, hence leading to event unregister failures being silently
ignored.

This patch assigns the ret variable to the invocation of the
event unregister callback, so that its return value is stored
and reported to the caller, and it raises a warning in case
of error.

Link: https://lore.kernel.org/20250321170821.101403-1-gpaoloni@redhat.com
Signed-off-by: Gabriele Paoloni <gpaoloni@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: vlan: don't propagate flags on open

[ Upstream commit 27b918007d96402aba10ed52a6af8015230f1793 ]

With the device instance lock, there is now a possibility of a deadlock:

[    1.211455] ============================================
[    1.211571] WARNING: possible recursive locking detected
[    1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[    1.211823] --------------------------------------------
[    1.211936] ip/184 is trying to acquire lock:
[    1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[    1.212207]
[    1.212207] but task is already holding lock:
[    1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[    1.212487]
[    1.212487] other info that might help us debug this:
[    1.212626]  Possible unsafe locking scenario:
[    1.212626]
[    1.212751]        CPU0
[    1.212815]        ----
[    1.212871]   lock(&dev->lock);
[    1.212944]   lock(&dev->lock);
[    1.213016]
[    1.213016]  *** DEADLOCK ***
[    1.213016]
[    1.213143]  May be due to missing lock nesting notation
[    1.213143]
[    1.213294] 3 locks held by ip/184:
[    1.213371]  #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[    1.213543]  #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[    1.213727]  #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[    1.213895]
[    1.213895] stack backtrace:
[    1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[    1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[    1.213994] Call Trace:
[    1.213995]  <TASK>
[    1.213996]  dump_stack_lvl+0x8e/0xd0
[    1.214000]  print_deadlock_bug+0x28b/0x2a0
[    1.214020]  lock_acquire+0xea/0x2a0
[    1.214027]  __mutex_lock+0xbf/0xd40
[    1.214038]  dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[    1.214040]  vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[    1.214042]  __dev_open+0x145/0x270
[    1.214046]  __dev_change_flags+0xb0/0x1e0
[    1.214051]  netif_change_flags+0x22/0x60 # IFF_UP vlandev
[    1.214053]  dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[    1.214055]  vlan_device_event+0x766/0x7c0 # on netdevsim0
[    1.214058]  notifier_call_chain+0x78/0x120
[    1.214062]  netif_open+0x6d/0x90
[    1.214064]  dev_open+0x5b/0xb0 # locks netdevsim0
[    1.214066]  bond_enslave+0x64c/0x1230
[    1.214075]  do_set_master+0x175/0x1e0 # on netdevsim0
[    1.214077]  do_setlink+0x516/0x13b0
[    1.214094]  rtnl_newlink+0xaba/0xb80
[    1.214132]  rtnetlink_rcv_msg+0x440/0x490
[    1.214144]  netlink_rcv_skb+0xeb/0x120
[    1.214150]  netlink_unicast+0x1f9/0x320
[    1.214153]  netlink_sendmsg+0x346/0x3f0
[    1.214157]  __sock_sendmsg+0x86/0xb0
[    1.214160]  ____sys_sendmsg+0x1c8/0x220
[    1.214164]  ___sys_sendmsg+0x28f/0x2d0
[    1.214179]  __x64_sys_sendmsg+0xef/0x140
[    1.214184]  do_syscall_64+0xec/0x1d0
[    1.214190]  entry_SYSCALL_64_after_hwframe+0x77/0x7f
[    1.214191] RIP: 0033:0x7f2d1b4a7e56

Device setup:

     netdevsim0 (down)
     ^        ^
  bond        netdevsim1.100@netdevsim1 allmulticast=on (down)

When we enslave the lower device (netdevsim0) which has a vlan, we
propagate vlan's allmuti/promisc flags during ndo_open. This causes
(re)locking on of the real_dev.

Propagate allmulti/promisc on flags change, not on the open. There
is a slight semantics change that vlans that are down now propagate
the flags, but this seems unlikely to result in the real issues.

Reproducer:

  echo 0 1 > /sys/bus/netdevsim/new_device

  dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
  dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)

  ip link set dev $dev name netdevsim0
  ip link set dev netdevsim0 up

  ip link add link netdevsim0 name netdevsim0.100 type vlan id 100
  ip link set dev netdevsim0.100 allmulticast on down
  ip link add name bond1 type bond mode 802.3ad
  ip link set dev netdevsim0 down
  ip link set dev netdevsim0 master bond1
  ip link set dev bond1 up
  ip link show

Reported-by: syzbot+b0c03d76056ef6cd12a6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/Z9CfXjLMKn6VLG5d@mini-arch/T/#m15ba130f53227c883e79fb969687d69d670337a0
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313100657.2287455-1-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table

[ Upstream commit 06cccc2ebbe6c8a20f714f3a0ff3ff489d3004bb ]

The TP-Link TL-WDN6200 "Driverless" version cards use a MT7612U chipset.

Add the USB ID to mt76x2u driver.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250317102235.1421726-1-uwu@icenowy.me
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: harden block_group::bg_list against list_del() races

[ Upstream commit 7511e29cf1355b2c47d0effb39e463119913e2f6 ]

As far as I can tell, these calls of list_del_init() on bg_list cannot
run concurrently with btrfs_mark_bg_unused() or btrfs_mark_bg_to_reclaim(),
as they are in transaction error paths and situations where the block
group is readonly.

However, if there is any chance at all of racing with mark_bg_unused(),
or a different future user of bg_list, better to be safe than sorry.

Otherwise we risk the following interleaving (bg_list refcount in parens)

T1 (some random op)                       T2 (btrfs_mark_bg_unused)
                                        !list_empty(&bg->bg_list); (1)
list_del_init(&bg->bg_list); (1)
                                        list_move_tail (1)
btrfs_put_block_group (0)
                                        btrfs_delete_unused_bgs
                                             bg = list_first_entry
                                             list_del_init(&bg->bg_list);
                                             btrfs_put_block_group(bg); (-1)

Ultimately, this results in a broken ref count that hits zero one deref
early and the real final deref underflows the refcount, resulting in a WARNING.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ahci: Marvell 88SE9215 controllers prefer DMA for ATAPI

[ Upstream commit 0507c777f5d8f9e34b137d28ee263599a7b81242 ]

We use CD/DVD drives under Marvell 88SE9215 SATA controller on many
Loongson-based machines. We found its PIO doesn't work well, and on the
opposite its DMA seems work very well.

We don't know the detail of the 88SE9215 SATA controller, but we have
tested different CD/DVD drives and they all have problems under 88SE9215
(but they all work well under an Intel SATA controller). So, we consider
this problem is bound to 88SE9215 SATA controller rather than bound to
CD/DVD drives.

As a solution, we define a new dedicated AHCI board id which is named
board_ahci_yes_fbs_atapi_dma for 88SE9215, and for this id we set the
AHCI_HFLAG_ATAPI_DMA_QUIRK and ATA_QUIRK_ATAPI_MOD16_DMA flags on the
SATA controller in order to prefer ATAPI DMA.

Reported-by: Yuli Wang <wangyuli@uniontech.com>
Tested-by: Jie Fan <fanjie@uniontech.com>
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250318104314.2160526-1-chenhuacai@loongson.cn
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: st: Fix array overflow in st_setup()

[ Upstream commit a018d1cf990d0c339fe0e29b762ea5dc10567d67 ]

Change the array size to follow parms size instead of a fixed value.

Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/linux-scsi/CALGdzuoubbra4xKOJcsyThdk5Y1BrAmZs==wbqjbkAgmKS39Aw@mail.gmail.com/
Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250311112516.5548-2-Kai.Makisara@kolumbus.fi
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cdc_ether|r8152: ThinkPad Hybrid USB-C/A Dock quirk

[ Upstream commit a07f23ad9baf716cbf7746e452c92960536ceae6 ]

Lenovo ThinkPad Hybrid USB-C with USB-A Dock (17ef:a359) is affected by
the same problem as the Lenovo Powered USB-C Travel Hub (17ef:721e):
Both are based on the Realtek RTL8153B chip used to use the cdc_ether
driver. However, using this driver, with the system suspended the device
constantly sends pause-frames as soon as the receive buffer fills up.
This causes issues with other devices, where some Ethernet switches stop
forwarding packets altogether.

Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.

Cc: Leon Schuermann <leon@is.currently.online>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Oliver Neukum <oliver@neukum.org> (maintainer:USB CDC ETHERNET DRIVER)
Cc: netdev@vger.kernel.org (open list:NETWORKING DRIVERS)
Link: https://git.kernel.org/netdev/net/c/cb82a54904a9
Link: https://git.kernel.org/netdev/net/c/2284bbd0cf39
Link: https://www.lenovo.com/de/de/p/accessories-and-software/docking/docking-usb-docks/40af0135eu
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/484336aad52d14ccf061b535bc19ef6396ef5120.1741601523.git.p.hahn@avm.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: ignore xattrs past end

[ Upstream commit c8e008b60492cf6fd31ef127aea6d02fd3d314cd ]

Once inside 'ext4_xattr_inode_dec_ref_all' we should
ignore xattrs entries past the 'end' entry.

This fixes the following KASAN reported issue:

==================================================================
BUG: KASAN: slab-use-after-free in ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
Read of size 4 at addr ffff888012c120c4 by task repro/2065

CPU: 1 UID: 0 PID: 2065 Comm: repro Not tainted 6.13.0-rc2+ #11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1fd/0x300
 ? tcp_gro_dev_warn+0x260/0x260
 ? _printk+0xc0/0x100
 ? read_lock_is_recursive+0x10/0x10
 ? irq_work_queue+0x72/0xf0
 ? __virt_addr_valid+0x17b/0x4b0
 print_address_description+0x78/0x390
 print_report+0x107/0x1f0
 ? __virt_addr_valid+0x17b/0x4b0
 ? __virt_addr_valid+0x3ff/0x4b0
 ? __phys_addr+0xb5/0x160
 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 kasan_report+0xcc/0x100
 ? ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 ext4_xattr_inode_dec_ref_all+0xb8c/0xe90
 ? ext4_xattr_delete_inode+0xd30/0xd30
 ? __ext4_journal_ensure_credits+0x5f0/0x5f0
 ? __ext4_journal_ensure_credits+0x2b/0x5f0
 ? inode_update_timestamps+0x410/0x410
 ext4_xattr_delete_inode+0xb64/0xd30
 ? ext4_truncate+0xb70/0xdc0
 ? ext4_expand_extra_isize_ea+0x1d20/0x1d20
 ? __ext4_mark_inode_dirty+0x670/0x670
 ? ext4_journal_check_start+0x16f/0x240
 ? ext4_inode_is_fast_symlink+0x2f2/0x3a0
 ext4_evict_inode+0xc8c/0xff0
 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0
 ? do_raw_spin_unlock+0x53/0x8a0
 ? ext4_inode_is_fast_symlink+0x3a0/0x3a0
 evict+0x4ac/0x950
 ? proc_nr_inodes+0x310/0x310
 ? trace_ext4_drop_inode+0xa2/0x220
 ? _raw_spin_unlock+0x1a/0x30
 ? iput+0x4cb/0x7e0
 do_unlinkat+0x495/0x7c0
 ? try_break_deleg+0x120/0x120
 ? 0xffffffff81000000
 ? __check_object_size+0x15a/0x210
 ? strncpy_from_user+0x13e/0x250
 ? getname_flags+0x1dc/0x530
 __x64_sys_unlinkat+0xc8/0xf0
 do_syscall_64+0x65/0x110
 entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x434ffd
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 8
RSP: 002b:00007ffc50fa7b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000107
RAX: ffffffffffffffda RBX: 00007ffc50fa7e18 RCX: 0000000000434ffd
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 00007ffc50fa7be0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffc50fa7e08 R14: 00000000004bbf30 R15: 0000000000000001
 </TASK>

The buggy address belongs to the object at ffff888012c12000
 which belongs to the cache filp of size 360
The buggy address is located 196 bytes inside of
 freed 360-byte region [ffff888012c12000, ffff888012c12168)

The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12c12
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x40(head|node=0|zone=0)
page_type: f5(slab)
raw: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
raw: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000040 ffff888000ad7640 ffffea0000497a00 dead000000000004
head: 0000000000000000 0000000000100010 00000001f5000000 0000000000000000
head: 0000000000000001 ffffea00004b0481 ffffffffffffffff 0000000000000000
head: 0000000000000002 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888012c11f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff888012c12000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888012c12080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                           ^
 ffff888012c12100: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
 ffff888012c12180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Reported-by: syzbot+b244bda78289b00204ed@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b244bda78289b00204ed
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Bhupesh <bhupesh@igalia.com>
Link: https://patch.msgid.link/20250128082751.124948-2-bhupesh@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "f2fs: rebuild nat_bits during umount"

[ Upstream commit 19426c4988aa85298c1b4caf2889d37ec5c80fea ]

This reverts commit 94c821fb286b545d37549ff30a0c341e066f0d6c.

It reports that there is potential corruption in node footer,
the most suspious feature is nat_bits, let's revert recovery
related code.

Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: protect ext4_release_dquot against freezing

[ Upstream commit 530fea29ef82e169cd7fe048c2b7baaeb85a0028 ]

Protect ext4_release_dquot against freezing so that we
don't try to start a transaction when FS is frozen, leading
to warnings.

Further, avoid taking the freeze protection if a transaction
is already running so that we don't need end up in a deadlock
as described in

  46e294efc355 ext4: fix deadlock with fs freezing and EA inodes

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241121123855.645335-3-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ahci: add PCI ID for Marvell 88SE9215 SATA Controller

[ Upstream commit 885251dc35767b1c992f6909532ca366c830814a ]

Add support for Marvell Technology Group Ltd. 88SE9215 SATA 6 Gb/s
controller, which is e.g. used in the DAWICONTROL DC-614e RAID bus
controller and was not automatically recognized before.

Tested with a DAWICONTROL DC-614e RAID bus controller.

Signed-off-by: Daniel Kral <d.kral@proxmox.com>
Link: https://lore.kernel.org/r/20250304092030.37108-1-d.kral@proxmox.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfp: add quirk for FS SFP-10GM-T copper SFP+ module

[ Upstream commit 05ec5c085eb7ae044d49e04a3cff194a0b2a3251 ]

Add quirk for a copper SFP that identifies itself as "FS" "SFP-10GM-T".
It uses RollBall protocol to talk to the PHY and needs 4 sec wait before
probing the PHY.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20250227071058.1520027-1-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks()

[ Upstream commit e6494977bd4a83862118a05f57a8df40256951c0 ]

syzbot reports an UBSAN issue as below:

------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in fs/f2fs/node.h:381:10
index 18446744073709550692 is out of range for type '__le32[5]' (aka 'unsigned int[5]')
CPU: 0 UID: 0 PID: 5318 Comm: syz.0.0 Not tainted 6.14.0-rc3-syzkaller-00060-g6537cfb395f3 #0
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:231 [inline]
 __ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429
 get_nid fs/f2fs/node.h:381 [inline]
 f2fs_truncate_inode_blocks+0xa5e/0xf60 fs/f2fs/node.c:1181
 f2fs_do_truncate_blocks+0x782/0x1030 fs/f2fs/file.c:808
 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:836
 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:886
 f2fs_file_write_iter+0x1bdb/0x2550 fs/f2fs/file.c:5093
 aio_write+0x56b/0x7c0 fs/aio.c:1633
 io_submit_one+0x8a7/0x18a0 fs/aio.c:2052
 __do_sys_io_submit fs/aio.c:2111 [inline]
 __se_sys_io_submit+0x171/0x2e0 fs/aio.c:2081
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f238798cde9

index 18446744073709550692 (decimal, unsigned long long)
= 0xfffffffffffffc64 (hexadecimal, unsigned long long)
= -924 (decimal, long long)

In f2fs_truncate_inode_blocks(), UBSAN detects that get_nid() tries to
access .i_nid[-924], it means both offset[0] and level should zero.

The possible case should be in f2fs_do_truncate_blocks(), we try to
truncate inode size to zero, however, dn.ofs_in_node is zero and
dn.node_page is not an inode page, so it fails to truncate inode page,
and then pass zeroed free_from to f2fs_truncate_inode_blocks(), result
in this issue.

if (dn.ofs_in_node || IS_INODE(dn.node_page)) {
f2fs_truncate_data_blocks_range(&dn, count);
free_from += count;
}

I guess the reason why dn.node_page is not an inode page could be: there
are multiple nat entries share the same node block address, once the node
block address was reused, f2fs_get_node_page() may load a non-inode block.

Let's add a sanity check for such condition to avoid out-of-bounds access
issue.

Reported-by: syzbot+6653f10281a1badc749e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/66fdcdf3.050a0220.40bef.0025.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi

[ Upstream commit 9a0dddfb30f120db3851627935851d262e4e7acb ]

In certain cases, hardware might provide packets with a
length greater than the maximum native Wi-Fi header length.
This can lead to accessing and modifying fields in the header
within the ath12k_dp_rx_h_undecap_nwifi function for
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and
potentially resulting in invalid data access and memory corruption.

Add a sanity check before processing the SKB to prevent invalid
data access in the undecap native Wi-Fi function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20250211090302.4105141-1-tamizh.raja@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfp: add quirk for 2.5G OEM BX SFP

[ Upstream commit a85035561025063125f81090e4f2bd65da368c83 ]

The OEM SFP-2.5G-BX10-D/U SFP module pair is meant to operate with
2500Base-X. However, in their EEPROM they incorrectly specify:
Transceiver codes   : 0x00 0x12 0x00 0x00 0x12 0x00 0x01 0x05 0x00
BR, Nominal         : 2500MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
Tested on BananaPi R3.

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20250218-b4-lkmsub-v1-1-1e51dcabed90@birger-koblitz.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: libata-eh: Do not use ATAPI DMA for a device limited to PIO mode

[ Upstream commit 91ec84f8eaddbc93d7c62e363d68aeb7b89879c7 ]

atapi_eh_request_sense() currently uses ATAPI DMA if the SATA controller
has ATA_FLAG_PIO_DMA (PIO cmds via DMA) set.

However, ATA_FLAG_PIO_DMA is a flag that can be set by a low-level driver
on a port at initialization time, before any devices are scanned.

If a controller detects a connected device that only supports PIO, we set
the flag ATA_DFLAG_PIO.

Modify atapi_eh_request_sense() to not use ATAPI DMA if the connected
device only supports PIO.

Reported-by: Philip Pemberton <lists@philpem.me.uk>
Closes: https://lore.kernel.org/linux-ide/c6722ee8-5e21-4169-af59-cbbae9edc02f@philpem.me.uk/
Tested-by: Philip Pemberton <lists@philpem.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250221015422.20687-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: add sanity check for agwidth in dbMount

[ Upstream commit ddf2846f22e8575d6b4b6a66f2100f168b8cd73d ]

The width in dmapctl of the AG is zero, it trigger a divide error when
calculating the control page level in dbAllocAG.

To avoid this issue, add a check for agwidth in dbAllocAG.

Reported-and-tested-by: syzbot+7c808908291a569281a9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7c808908291a569281a9
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: Prevent copying of nlink with value 0 from disk inode

[ Upstream commit b61e69bb1c049cf507e3c654fa3dc1568231bd07 ]

syzbot report a deadlock in diFree. [1]

When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4,
which does not match the mounted loop device, causing the mapping of the
mounted loop device to be invalidated.

When creating the directory and creating the inode of iag in diReadSpecial(),
read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the
metapage data it returns is corrupted, which causes the nlink value of 0 to be
assigned to the iag inode when executing copy_from_dinode(), which ultimately
causes a deadlock when entering diFree().

To avoid this, first check the nlink value of dinode before setting iag inode.

[1]
WARNING: possible recursive locking detected
6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted
--------------------------------------------
syz-executor301/5309 is trying to acquire lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889

but task is already holding lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(imap->im_aglock[index]));
  lock(&(imap->im_aglock[index]));

 *** DEADLOCK ***

 May be due to missing lock nesting notation

5 locks held by syz-executor301/5309:
 #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515
 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline]
 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026
 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline]
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline]
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669

stack backtrace:
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037
 check_deadlock kernel/locking/lockdep.c:3089 [inline]
 validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891
 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202
 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
 __mutex_lock_common kernel/locking/mutex.c:608 [inline]
 __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156
 evict+0x4e8/0x9b0 fs/inode.c:725
 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline]
 duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022
 diNewIAG fs/jfs/jfs_imap.c:2597 [inline]
 diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
 diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669
 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590
 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225
 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
 do_mkdirat+0x264/0x3a0 fs/namei.c:4280
 __do_sys_mkdirat fs/namei.c:4295 [inline]
 __se_sys_mkdirat fs/namei.c:4293 [inline]
 __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Reported-by: syzbot+355da3b3a74881008e8f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=355da3b3a74881008e8f
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>