ALSA: pci: lx6464es: fix a debug loop

[ Upstream commit 5dac9f8dc25fefd9d928b98f6477ff3daefd73e3 ]

This loop accidentally reuses the "i" iterator for both the inside and
the outside loop.  The value of MAX_STREAM_BUFFER is 5.  I believe that
chip->rmh.stat_len is in the 2-12 range.  If the value of .stat_len is
4 or more then it will loop exactly one time, but if it's less then it
is a forever loop.

It looks like it was supposed to combined into one loop where
conditions are checked.

Fixes: 8e6320064c33 ("ALSA: lx_core: Remove useless #if 0 .. #endif")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y9jnJTis/mRFJAQp@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a

[ Upstream commit bc121b707e816616567683e51fd9194c2309977a ]

As other rk336x based devices, the Rock 3 Model A has issues with high
speed SD cards, so lower the speed to 50 instead of 104 in the same
manor has the Quartz64 Model B has.

Fixes: 22a442e6586c ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")
Signed-off-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20230128112432.132302-1-strit@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: fix input enable pinconf on rk3399

[ Upstream commit 6f515b663d49a14fb63f8c5d0a2a4ae53d44790a ]

When the input enable pinconf was introduced, a default drive-strength
value of 2 was set for the pull up/down configs. However, this parameter
is unneeded when configuring the pin as input, and having a single
hardcoded value here is actually harmful: GPIOs on the RK3399 have
various same drive-strength capabilities depending on the bank and port
they belong to.

As an example, trying to configure the GPIO4_PD3 pin as an input with
pull-up enabled fails with the following output:

  [   10.706542] rockchip-pinctrl pinctrl: unsupported driver strength 2
  [   10.713661] rockchip-pinctrl pinctrl: pin_config_set op failed for pin 155

(acceptable drive-strength values for this pin being 3, 6, 9 and 12)

Let's drop the drive-strength property from all input pinconfs in order
to solve this issue.

Fixes: ec48c3e82ca3 ("arm64: dts: rockchip: add an input enable pinconf to rk3399")
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20221215101947.254896-1-arnaud.ferraris@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: forwarding: lib: quote the sysctl values

[ Upstream commit 3a082086aa200852545cf15159213582c0c80eba ]

When set/restore sysctl value, we should quote the value as some keys
may have multi values, e.g. net.ipv4.ping_group_range

Fixes: f5ae57784ba8 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used

[ Upstream commit 2fcde9fe258ec8b88d41def38e43ca4da32c0a9a ]

While running this selftest which usually passes:

~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

if I start PTP timestamping then run it again (debug prints added by me),
the unknown IPv6 MC traffic is seen by the CPU port even when it should
have been dropped:

~/selftests/drivers/net/dsa# ptp4l -i swp0 -2 -P -m
ptp4l[225.410]: selected /dev/ptp1 as PTP clock
[  225.445746] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_add: port 0 adding L2 PTP trap
[  225.453815] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP event trap
[  225.462703] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP general trap
[  225.471768] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP event trap
[  225.480651] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP general trap
ptp4l[225.488]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
ptp4l[225.488]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
^C
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [FAIL]
        reception succeeded, but should have failed
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

The PGID_MCIPV6 is configured correctly to not flood to the CPU,
I checked that.

Furthermore, when I disable back PTP RX timestamping (ptp4l doesn't do
that when it exists), packets are RX filtered again as they should be:

~/selftests/drivers/net/dsa# hwstamp_ctl -i swp0 -r 0
[  218.202854] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_del: port 0 removing L2 PTP trap
[  218.212656] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP event trap
[  218.222975] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP general trap
[  218.233133] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP event trap
[  218.242251] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP general trap
current settings:
tx_type 1
rx_filter 12
new settings:
tx_type 1
rx_filter 0
~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0
TEST: swp0: Unicast IPv4 to primary MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to macvlan MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address                     [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, promisc            [ OK ]
TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti           [ OK ]
TEST: swp0: Multicast IPv4 to joined group                          [ OK ]
TEST: swp0: Multicast IPv4 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv4 to unknown group, allmulti               [ OK ]
TEST: swp0: Multicast IPv6 to joined group                          [ OK ]
TEST: swp0: Multicast IPv6 to unknown group                         [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, promisc                [ OK ]
TEST: swp0: Multicast IPv6 to unknown group, allmulti               [ OK ]

So it's clear that something in the PTP RX trapping logic went wrong.

Looking a bit at the code, I can see that there are 4 typos, which
populate "ipv4" VCAP IS2 key filter fields for IPv6 keys.

VCAP IS2 keys of type OCELOT_VCAP_KEY_IPV4 and OCELOT_VCAP_KEY_IPV6 are
handled by is2_entry_set(). OCELOT_VCAP_KEY_IPV4 looks at
&filter->key.ipv4, and OCELOT_VCAP_KEY_IPV6 at &filter->key.ipv6.
Simply put, when we populate the wrong key field, &filter->key.ipv6
fields "proto.mask" and "proto.value" remain all zeroes (or "don't care").
So is2_entry_set() will enter the "else" of this "if" condition:

if (msk == 0xff && (val == IPPROTO_TCP || val == IPPROTO_UDP))

and proceed to ignore the "proto" field. The resulting rule will match
on all IPv6 traffic, trapping it to the CPU.

This is the reason why the local_termination.sh selftest sees it,
because control traps are stronger than the PGID_MCIPV6 used for
flooding (from the forwarding data path).

But the problem is in fact much deeper. We trap all IPv6 traffic to the
CPU, but if we're bridged, we set skb->offload_fwd_mark = 1, so software
forwarding will not take place and IPv6 traffic will never reach its
destination.

The fix is simple - correct the typos.

I was intentionally inaccurate in the commit message about the breakage
occurring when any PTP timestamping is enabled. In fact it only happens
when L4 timestamping is requested (HWTSTAMP_FILTER_PTP_V2_EVENT or
HWTSTAMP_FILTER_PTP_V2_L4_EVENT). But ptp4l requests a larger RX
timestamping filter than it needs for "-2": HWTSTAMP_FILTER_PTP_V2_EVENT.
I wanted people skimming through git logs to not think that the bug
doesn't affect them because they only use ptp4l in L2 mode.

Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230207183117.1745754-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rds: rds_rm_zerocopy_callback() use list_first_entry()

[ Upstream commit f753a68980cf4b59a80fe677619da2b1804f526d ]

rds_rm_zerocopy_callback() uses list_entry() on the head of a list
causing a type confusion.
Use list_first_entry() to actually access the first element of the
rs_zcookie_queue list.

Fixes: 9426bbc6de99 ("rds: use list structure to track information for zerocopy completion notification")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Link: https://lore.kernel.org/r/20230202-rds-zerocopy-v3-1-83b0df974f9a@diag.uniroma1.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: Fix failing VXLAN VNI filtering test

[ Upstream commit b963d9d5b9437a6b99504987310f98537c9e77d4 ]

iproute2 does not recognize the "group6" and "remote6" keywords. Fix by
using "group" and "remote" instead.

Before:

 # ./test_vxlan_vnifiltering.sh
 [...]
 Tests passed:  25
 Tests failed:   2

After:

 # ./test_vxlan_vnifiltering.sh
 [...]
 Tests passed:  27
 Tests failed:   0

Fixes: 3edf5f66c12a ("selftests: add new tests for vxlan vnifiltering")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230207141819.256689-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

txhash: fix sk->sk_txrehash default

[ Upstream commit c11204c78d6966c5bda6dd05c3ac5cbb193f93e3 ]

This code fix a bug that sk->sk_txrehash gets its default enable
value from sysctl_txrehash only when the socket is a TCP listener.

We should have sysctl_txrehash to set the default sk->sk_txrehash,
no matter TCP, nor listerner/connector.

Tested by following packetdrill:
  0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
  +0 socket(..., SOCK_DGRAM, IPPROTO_UDP) = 4
  // SO_TXREHASH == 74, default to sysctl_txrehash == 1
  +0 getsockopt(3, SOL_SOCKET, 74, [1], [4]) = 0
  +0 getsockopt(4, SOL_SOCKET, 74, [1], [4]) = 0

Fixes: 26859240e4ee ("txhash: Add socket option to control TX hash rethink behavior")
Signed-off-by: Kevin Yang <yyd@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()

[ Upstream commit c966153d120222cd4e85e1e1601584d7d4d91dcb ]

Parameters 'queue_index' and 'napi_id' are passed in a swapped order.
Fix it here.

Fixes: 23233e577ef9 ("net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Add ndo_tx_timeout support

[ Upstream commit 9b275176270efd18f2f4e328b32be1bad34c4c0d ]

On some platforms, 100/1000/2500 speeds seem to have sometimes problems
reporting false positive tx unit hang during stressful UDP traffic. Likely
other Intel drivers introduce responses to a tx hang. Update the 'tx hang'
comparator with the comparison of the head and tail of ring pointers and
restore the tx_timeout_factor to the previous value (one).

This can be test by using netperf or iperf3 applications.
Example:
iperf3 -s -p 5001
iperf3 -c 192.168.0.2 --udp -p 5001 --time 600 -b 0

netserver -p 16604
netperf -H 192.168.0.2 -l 600 -p 16604 -t UDP_STREAM -- -m 64000

Fixes: b27b8dc77b5e ("igc: Increase timeout value for Speed 100/1000/2500")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230206235818.662384-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Serialize module cleanup with reload and remove

[ Upstream commit 8f0d1451ecf7b3bd5a06ffc866c753d0f3ab4683 ]

Currently, remove and reload flows can run in parallel to module cleanup.
This design is error prone. For example: aux_drivers callbacks are called
from both cleanup and remove flows with different lockings, which can
cause a deadlock[1].
Hence, serialize module cleanup with reload and remove.

[1]
       cleanup                        remove
       -------                        ------
   auxiliary_driver_unregister();
                                     devl_lock()
                                      auxiliary_device_delete(mlx5e_aux)
    device_lock(mlx5e_aux)
     devl_lock()
                                       device_lock(mlx5e_aux)

Fixes: 912cebf420c2 ("net/mlx5e: Connect ethernet part to auxiliary bus")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fw_tracer, Zero consumer index when reloading the tracer

[ Upstream commit 184e1e4474dbcfebc4dbd1fa823a329978f25506 ]

When tracer is reloaded, the device will log the traces at the
beginning of the log buffer. Also, driver is reading the log buffer in
chunks in accordance to the consumer index.
Hence, zero consumer index when reloading the tracer.

Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers

[ Upstream commit db561fed6b8fa3878e74d5df6512a4a38152b63e ]

Whenever the driver is reading the string DBs into buffers, the driver
is setting the load bit, but the driver never clears this bit.
As a result, in case load bit is on and the driver query the device for
new string DBs, the driver won't read again the string DBs.
Fix it by clearing the load bit when query the device for new string
DBs.

Fixes: 2d69356752ff ("net/mlx5: Add support for fw live patch event")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Expose SF firmware pages counter

[ Upstream commit 9965bbebae59b3563a4d95e4aed121e8965dfdc2 ]

Currently, each core device has VF pages counter which stores number of
fw pages used by its VFs and SFs.

The current design led to a hang when performing firmware reset on DPU,
where the DPU PFs stalled in sriov unload flow due to waiting on release
of SFs pages instead of waiting on only VFs pages.

Thus, Add a separate counter for SF firmware pages, which will prevent
the stall scenario described above.

Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Store page counters in a single array

[ Upstream commit c3bdbaea654d8df39112de33037106134a520dc7 ]

Currently, an independent page counter is used for tracking memory usage
for each function type such as VF, PF and host PF (DPU).

For better code-readibilty, use a single array that stores
the number of allocated memory pages for each function type.

Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Stable-dep-of: 9965bbebae59 ("net/mlx5: Expose SF firmware pages counter")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: IPoIB, Show unknown speed instead of error

[ Upstream commit 8aa5f171d51c1cb69e5e3106df4dd1a446102823 ]

ethtool is returning an error for unknown speeds for the IPoIB interface:

$ ethtool ib0
netlink error: failed to retrieve link settings
netlink error: Invalid argument
netlink error: failed to retrieve link settings
netlink error: Invalid argument
Settings for ib0:
Link detected: no

After this change, ethtool will return success and show "unknown speed":

$ ethtool ib0
Settings for ib0:
Supported ports: [  ]
Supported link modes:   Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes:  Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: no

Fixes: eb234ee9d541 ("net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev mode

[ Upstream commit 8974aa9638df557f4642acef707af15648a03555 ]

Moving to switchdev mode with rx-vlan-filter on and then setting it off
causes the kernel to crash since fs->vlan is freed during nic profile
cleanup flow.

RX VLAN filtering is not supported in switchdev mode so unset it when
changing to switchdev and restore its value when switching back to
legacy.

trace:
[] RIP: 0010:mlx5e_disable_cvlan_filter+0x43/0x70
[] set_feature_cvlan_filter+0x37/0x40 [mlx5_core]
[] mlx5e_handle_feature+0x3a/0x60 [mlx5_core]
[] mlx5e_set_features+0x6d/0x160 [mlx5_core]
[] __netdev_update_features+0x288/0xa70
[] ethnl_set_features+0x309/0x380
[] ? __nla_parse+0x21/0x30
[] genl_family_rcv_msg_doit.isra.17+0x110/0x150
[] genl_rcv_msg+0x112/0x260
[] ? features_reply_size+0xe0/0xe0
[] ? genl_family_rcv_msg_doit.isra.17+0x150/0x150
[] netlink_rcv_skb+0x4e/0x100
[] genl_rcv+0x24/0x40
[] netlink_unicast+0x1ab/0x290
[] netlink_sendmsg+0x257/0x4f0
[] sock_sendmsg+0x5c/0x70

Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Bridge, fix ageing of peer FDB entries

[ Upstream commit da0c52426cd23f8728eff72c2b2d2a3eb6b451f5 ]

SWITCHDEV_FDB_ADD_TO_BRIDGE event handler that updates FDB entry 'lastuse'
field is only executed for eswitch that owns the entry. However, if peer
entry processed packets at least once it will have hardware counter 'used'
value greater than entry 'lastuse' from that point on, which will cause FDB
entry not being aged out.

Process the event on all eswitch instances.

Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change

[ Upstream commit 1e66220948df815d7b37e0ff8b4627ce10433738 ]

rq->hw_mtu is used in function en_rx.c/mlx5e_skb_from_cqe_mpwrq_linear()
to catch oversized packets. If FCS is concatenated to the end of the
packet then the check should be updated accordingly.

Rx rings initialization (mlx5e_init_rxq_rq()) invoked for every new set
of channels, as part of mlx5e_safe_switch_params(), unknowingly if it
runs with default configuration or not. Current rq->hw_mtu
initialization assumes default configuration and ignores
params->scatter_fcs_en flag state.
Fix this, by accounting for params->scatter_fcs_en flag state during
rq->hw_mtu initialization.

In addition, updating rq->hw_mtu value during ingress traffic might
lead to packets drop and oversize_pkts_sw_drop counter increase with no
good reason. Hence we remove this optimization and switch the set of
channels with a new one, to make sure we don't get false positives on
the oversize_pkts_sw_drop counter.

Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: fix VCAP filters not matching on MAC with "protocol 802.1Q"

[ Upstream commit f964f8399df29d3e3ced77177cf35131cd2491bf ]

Alternative short title: don't instruct the hardware to match on
EtherType with "protocol 802.1Q" flower filters. It doesn't work for the
reasons detailed below.

With a command such as the following:

tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \
action vlan modify id 300 \
action goto chain $(IS2 0 0)

the created filter is set by ocelot_flower_parse_key() to be of type
OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}.
This gets propagated all the way to is1_entry_set() which commits it to
hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the
case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY,
and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE.

The problem is that for VLAN-tagged frames, the hardware interprets the
ETYPE field as holding the encapsulated VLAN protocol. So the above
filter will only match those packets which have an encapsulated protocol
of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac.

The reason why this is allowed to occur is because, although we have a
block of code in ocelot_flower_parse_key() which sets "match_protocol"
to false when VLAN keys are present, that code executes too late.
There is another block of code, which executes for Ethernet addresses,
and has a "goto finished_key_parsing" and skips the VLAN header parsing.
By skipping it, "match_protocol" remains with the value it was
initialized with, i.e. "true", and "proto" is set to f->common.protocol,
or 0x8100.

The concept of ignoring some keys rather than erroring out when they are
present but can't be offloaded is dubious in itself, but is present
since the initial commit fe3490e6107e ("net: mscc: ocelot: Hardware
ofload for tc flower filter"), and it's outside of the scope of this
patch to change that.

The problem was introduced when the driver started to interpret the
flower filter's protocol, and populate the VCAP filter's ETYPE field
based on it.

To fix this, it is sufficient to move the code that parses the VLAN keys
earlier than the "goto finished_key_parsing" instruction. This will
ensure that if we have a flower filter with both VLAN and Ethernet
address keys, it won't match on ETYPE 0x8100, because the VLAN key
parsing sets "match_protocol = false".

Fixes: 86b956de119c ("net: mscc: ocelot: support matching on EtherType")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-aware

[ Upstream commit 0b6d6425103a676e2b6a81f3fd35d7ea4f9b90ec ]

Frank reports that in a mt7530 setup where some ports are standalone and
some are in a VLAN-aware bridge, 8021q uppers of the standalone ports
lose their VLAN tag on xmit, as seen by the link partner.

This seems to occur because once the other ports join the VLAN-aware
bridge, mt7530_port_vlan_filtering() also calls
mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way
that the switch processes the traffic of the standalone port.

Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it:

EG_TAG: Incoming Port Egress Tag VLAN Attribution
0: disabled (system default)
1: consistent (keep the original ingress tag attribute)

My interpretation is that this setting applies on the ingress port, and
"disabled" is basically the normal behavior, where the egress tag format
of the packet (tagged or untagged) is decided by the VLAN table
(MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG).

But there is also an option of overriding the system default behavior,
and for the egress tagging format of packets to be decided not by the
VLAN table, but simply by copying the ingress tag format (if ingress was
tagged, egress is tagged; if ingress was untagged, egress is untagged;
aka "consistent). This is useful in 2 scenarios:

- VLAN-unaware bridge ports will always encounter a miss in the VLAN
  table. They should forward a packet as-is, though. So we use
  "consistent" there. See commit e045124e9399 ("net: dsa: mt7530: fix
  tagged frames pass-through in VLAN-unaware mode").

- Traffic injected from the CPU port. The operating system is in god
  mode; if it wants a packet to exit as VLAN-tagged, it sends it as
  VLAN-tagged. Otherwise it sends it as VLAN-untagged*.

*This is true only if we don't consider the bridge TX forwarding offload
feature, which mt7530 doesn't support.

So for now, make the CPU port always stay in "consistent" mode to allow
software VLANs to be forwarded to their egress ports with the VLAN tag
intact, and not stripped.

Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/
Fixes: e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230205140713.1609281-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: switch: fix potential memleak in ice_add_adv_recipe()

[ Upstream commit 4a606ce68426c88ff2563382b33cc34f3485fe57 ]

When ice_add_special_words() fails, the 'rm' is not released, which will
lead to a memory leak. Fix this up by going to 'err_unroll' label.

Compile tested only.

Fixes: 8b032a55c1bd ("ice: low level support for tunnels")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix disabling Rx VLAN filtering with port VLAN enabled

[ Upstream commit c793f8ea15e312789b5b6b4a5e7b0b92315be5cb ]

If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN
filtering will be disabled if the VF requests to enable promiscuous
mode. When the VF is in a port VLAN, this is the incorrect behavior
because it will allow the VF to receive traffic outside of its port VLAN
domain. Fortunately this only resulted in the VF(s) receiving broadcast
traffic outside of the VLAN domain because all of the VLAN promiscuous
rules are based on the port VLAN ID. Fix this by setting the
.disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on
the VF.

Also, make sure to make this fix for both Single VLAN Mode and Double
VLAN Mode enabled devices.

Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Do not use WQ_MEM_RECLAIM flag for workqueue

[ Upstream commit 4d159f7884f78b1aacb99b4fc37d1e3cb1194e39 ]

When both ice and the irdma driver are loaded, a warning in
check_flush_dependency is being triggered. This is due to ice driver
workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one
is not.

According to kernel documentation, this flag should be set if the
workqueue will be involved in the kernel's memory reclamation flow.
Since it is not, there is no need for the ice driver's WQ to have this
flag set so remove it.

Example trace:

[  +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0
[  +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0
[  +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha
in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel
_rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1
0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_
core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs
ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter
acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba
ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[  +0.000161]  [last unloaded: bonding]
[  +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S                 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1
[  +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020
[  +0.000003] Workqueue: ice ice_service_task [ice]
[  +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0
[  +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08
9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06
[  +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282
[  +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000
[  +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80
[  +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112
[  +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000
[  +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400
[  +0.000004] FS:  0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000
[  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0
[  +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  +0.000002] PKRU: 55555554
[  +0.000003] Call Trace:
[  +0.000002]  <TASK>
[  +0.000003]  __flush_workqueue+0x203/0x840
[  +0.000006]  ? mutex_unlock+0x84/0xd0
[  +0.000008]  ? __pfx_mutex_unlock+0x10/0x10
[  +0.000004]  ? __pfx___flush_workqueue+0x10/0x10
[  +0.000006]  ? mutex_lock+0xa3/0xf0
[  +0.000005]  ib_cache_cleanup_one+0x39/0x190 [ib_core]
[  +0.000174]  __ib_unregister_device+0x84/0xf0 [ib_core]
[  +0.000094]  ib_unregister_device+0x25/0x30 [ib_core]
[  +0.000093]  irdma_ib_unregister_device+0x97/0xc0 [irdma]
[  +0.000064]  ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma]
[  +0.000059]  ? up_write+0x5c/0x90
[  +0.000005]  irdma_remove+0x36/0x90 [irdma]
[  +0.000062]  auxiliary_bus_remove+0x32/0x50
[  +0.000007]  device_release_driver_internal+0xfa/0x1c0
[  +0.000005]  bus_remove_device+0x18a/0x260
[  +0.000007]  device_del+0x2e5/0x650
[  +0.000005]  ? __pfx_device_del+0x10/0x10
[  +0.000003]  ? mutex_unlock+0x84/0xd0
[  +0.000004]  ? __pfx_mutex_unlock+0x10/0x10
[  +0.000004]  ? _raw_spin_unlock+0x18/0x40
[  +0.000005]  ice_unplug_aux_dev+0x52/0x70 [ice]
[  +0.000160]  ice_service_task+0x1309/0x14f0 [ice]
[  +0.000134]  ? __pfx___schedule+0x10/0x10
[  +0.000006]  process_one_work+0x3b1/0x6c0
[  +0.000008]  worker_thread+0x69/0x670
[  +0.000005]  ? __kthread_parkme+0xec/0x110
[  +0.000007]  ? __pfx_worker_thread+0x10/0x10
[  +0.000005]  kthread+0x17f/0x1b0
[  +0.000005]  ? __pfx_kthread+0x10/0x10
[  +0.000004]  ret_from_fork+0x29/0x50
[  +0.000009]  </TASK>

Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvidiafb: detect the hardware support before removing console.

[ Upstream commit 04119ab1a49fc41cb70f0472be5455af268fa260 ]

This driver removed the console, but hasn't yet decided if it could
take over the console yet. Instead of doing that, probe the hw for
support and then remove the console afterwards.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216859
Fixes: 145eed48de27 ("fbdev: Remove conflicting devices on PCI bus")
Reported-by: Zeno Davatz <zdavatz@gmail.com>
Tested-by: Zeno Davatz <zdavatz@gmail.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205210751.3842103-1-airlied@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task

[ Upstream commit 7a2127e66a00e073db8d90f9aac308f4a8a64226 ]

set_cpus_allowed_ptr() will fail with -EINVAL if the requested
affinity mask is not a subset of the task_cpu_possible_mask() for the
task being updated. Consequently, on a heterogeneous system with cpusets
spanning the different CPU types, updates to the cgroup hierarchy can
silently fail to update task affinities when the effective affinity
mask for the cpuset is expanded.

For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are
the only cores capable of executing 32-bit tasks. Attaching a 32-bit
task to a cpuset containing CPUs 0-2 will correctly affine the task to
CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend
the affinity mask of the 32-bit task because update_tasks_cpumask() will
pass the full 0-3 mask to set_cpus_allowed_ptr().

Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater
and use it to mask the 'effective_cpus' mask with the possible mask for
each task being updated.

Fixes: 431c69fac05b ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/virtio: exbuf->fence_fd unmodified on interrupted wait

[ Upstream commit 8f20660f053cefd4693e69cfff9cf58f4f7c4929 ]

An interrupted dma_fence_wait() becomes an -ERESTARTSYS returned
to userspace ioctl(DRM_IOCTL_VIRTGPU_EXECBUFFER) calls, prompting to
retry the ioctl(), but the passed exbuf->fence_fd has been reset to -1,
making the retry attempt fail at sync_file_get_fence().

The uapi for DRM_IOCTL_VIRTGPU_EXECBUFFER is changed to retain the
passed value for exbuf->fence_fd when returning anything besides a
successful result from the ioctl.

Fixes: 2cd7b6f08bc4 ("drm/virtio: add in/out fence support for explicit synchronization")
Signed-off-by: Ryan Neph <ryanneph@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203233345.2477767-1-ryanneph@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Don't do the WM0->WM1 copy w/a if WM1 is already enabled

[ Upstream commit 90d5e8301ac24550be80d193aa5582cab56c29fc ]

Due to a workaround we have to make sure the WM1 watermarks block/lines
values are sensible even when WM1 is disabled. To that end we copy those
values from WM0.

However since we now keep each wm level enabled on a per-plane basis
it doesn't seem necessary to do that copy when we already have an
enabled WM1 on the current plane. That is, we might be in a situation
where another plane can only do WM0 (and thus needs the copy) but
the current plane's WM1 is still perfectly valid (ie. fits into the
current DDB allocation).

Skipping the copy could avoid reprogramming the plane's registers
needlessly in some cases.

Fixes: a301cb0fca2d ("drm/i915: Keep plane watermarks enabled more aggressively")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit c580c2d27ac8754cc6f01da1d715b7272f5f9cbb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: amd_sfh: if no sensors are enabled, clean up

[ Upstream commit 7bcfdab3f0c6672ca52be3cb65a0550d8b99554b ]

It was reported that commit b300667b33b2 ("HID: amd_sfh: Disable the
interrupt for all command") had caused increased resume time on HP Envy
x360.

Before this commit 3 sensors were reported, but they were not actually
functional.  After this commit the sensors are no longer reported, but
also the resume time increased.

To avoid this problem explicitly look for the number of disabled sensors.
If all the sensors are disabled, clean everything up.

Fixes: b300667b33b2 ("HID: amd_sfh: Disable the interrupt for all command")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2115
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20230203220850.13924-1-mario.limonciello@amd.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: microchip: sparx5: fix PTP init/deinit not checking all ports

[ Upstream commit d7d94b2612f5dc25d61dc7bf58aafe7b31f40191 ]

Check all ports instead of just port_count ports. PTP init was only
checking ports 0 to port_count. If the hardware ports are not mapped
starting from 0 then they would be missed, e.g. if only ports 20-30 were
mapped it would attempt to init ports 0-10, resulting in NULL pointers
when attempting to timestamp. Now it will init all mapped ports.

Fixes: 70dfe25cd866 ("net: sparx5: Update extraction/injection for timestamping")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uapi: add missing ip/ipv6 header dependencies for linux/stddef.h

[ Upstream commit 03702d4d29be4e2510ec80b248dbbde4e57030d9 ]

Since commit 58e0be1ef6118 ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:

$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
  103 |         __struct_group(/* no tag */, addrs, /* no attrs */,
      |         ^~~~~~~~~~~~~~
...

Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.

Fixes: 58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems

[ Upstream commit 51be2fffd65d9f9cb427030ab0ee85d791b4437d ]

On a sc7180-based Chromebook, when I go to
/sys/devices/system/cpu/cpu0/cpufreq I can see:

  cpuinfo_cur_freq:2995200
  cpuinfo_max_freq:1804800
  scaling_available_frequencies:300000 576000 ... 1708800 1804800
  scaling_cur_freq:1804800
  scaling_max_freq:1804800

As you can see the `cpuinfo_cur_freq` is bogus. It turns out that this
bogus info started showing up as of commit c72cf0cb1d77 ("cpufreq:
qcom-hw: Fix the frequency returned by cpufreq_driver->get()"). That
commit seems to assume that everyone is on the LMH bandwagon, but
sc7180 isn't.

Let's go back to the old code in the case where LMH isn't used.

Fixes: c72cf0cb1d77 ("cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
[ Viresh: Fixed the 'fixes' tag ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: missed doorbell workaround

[ Upstream commit b69585bfceceeffda940906cabfdaee4b47bde92 ]

In one version of the HW there is a remote possibility that it
will miss the doorbell ring.  This adds a bit of protection to
be sure we don't stall a queue from a missed doorbell.

Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: refactor use of ionic_rx_fill()

[ Upstream commit e55f0f5befc26e2ba6bb8c1f945ea8e37ee0e334 ]

The same pre-work code is used before each call to
ionic_rx_fill(), so bring it in and make it a part of
the routine.

Signed-off-by: Neel Patel <neel@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b69585bfcece ("ionic: missed doorbell workaround")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: clean interrupt before enabling queue to avoid credit race

[ Upstream commit e8797a058466b60fc5a3291b92430c93ba90eaff ]

Clear the interrupt credits before enabling the queue rather
than after to be sure that the enabled queue starts at 0 and
that we don't wipe away possible credits after enabling the
queue.

Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling")
Signed-off-by: Neel Patel <neel.patel@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: meson-gxl: use MMD access dummy stubs for GXL, internal PHY

[ Upstream commit 69ff53e4a4c9498eeed7d1441f68a1481dc69251 ]

Jerome provided the information that also the GXL internal PHY doesn't
support MMD register access and EEE. MMD reads return 0xffff, what
results in e.g. completely wrong ethtool --show-eee output.
Therefore use the MMD dummy stubs.

Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement")
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/84432fe4-0be4-bc82-4e5c-557206b40f56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: Perform zynqmp dynamic configuration only for SGMII interface

[ Upstream commit c9011b028e956c3b6baa6f131d9eec43e4e52020 ]

In zynqmp platforms where firmware supports dynamic SGMII configuration
but has other non-SGMII ethernet devices, it fails them with no packets
received at the RX interface.

To fix this behaviour perform SGMII dynamic configuration only
for the SGMII phy interface.

Fixes: 32cee7818111 ("net: macb: Add zynqmp SGMII dynamic configuration support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reported-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1675340779-27499-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix error checking in bond_debug_reregister()

[ Upstream commit cbe83191d40d8925b7a99969d037d2a0caf69294 ]

Since commit ff9fb72bc077 ("debugfs: return error values,
not NULL") changed return value of debugfs_rename() in
error cases from %NULL to %ERR_PTR(-ERROR), we should
also check error values instead of NULL.

Fixes: ff9fb72bc077 ("debugfs: return error values, not NULL")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230202093256.32458-1-zhengqi.arch@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylink: move phy_device_free() to correctly release phy device

[ Upstream commit ce93fdb5f2ca5c9e2a9668411cc39091507f8dc9 ]

After calling fwnode_phy_find_device(), the phy device refcount is
incremented. Then, when the phy device is attached to a netdev with
phy_attach_direct(), the refcount is also incremented but only
decremented in the caller if phy_attach_direct() fails. Move
phy_device_free() before the "if" to always release it correctly.
Indeed, either phy_attach_direct() failed and we don't want to keep a
reference to the phydev or it succeeded and a reference has been taken
internally.

Fixes: 25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: Make OF framebuffer device names unique

[ Upstream commit 241d2fb56a18473af5f2ff0d512992a996eb64dd ]

Since Linux 5.19 this error is observed:

sysfs: cannot create duplicate filename '/devices/platform/of-display'

This is because multiple devices with the same name 'of-display' are
created on the same bus. Update the code to create numbered device names
for the displays.

Also, fix a node refcounting issue when exiting the boot display loop.

cc: linuxppc-dev@lists.ozlabs.org
References: https://bugzilla.kernel.org/show_bug.cgi?id=216095
Fixes: 52b1b46c39ae ("of: Create platform devices for OF framebuffers")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230201162247.3575506-1-robh@kernel.org
[robh: Rework to avoid node refcount leaks]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: fix bug with DSCP copy to v6 from v4 tunnel

[ Upstream commit 6028da3f125fec34425dbd5fec18e85d372b2af6 ]

When copying the DSCP bits for decap-dscp into IPv6 don't assume the
outer encap is always IPv6. Instead, as with the inner IPv4 case, copy
the DSCP bits from the correctly saved "tos" value in the control block.

Fixes: 227620e29509 ("[IPSEC]: Separate inner/outer mode processing on input")
Signed-off-by: Christian Hopps <chopps@chopps.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/usnic: use iommu_map_atomic() under spin_lock()

[ Upstream commit b7e08a5a63a11627601915473c3b569c1f6c6c06 ]

usnic_uiom_map_sorted_intervals() is called under spin_lock(), iommu_map()
might sleep, use iommu_map_atomic() to avoid potential sleep in atomic
context.

Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230129093757.637354-1-yangyingliang@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Fix potential NULL-ptr-dereference

[ Upstream commit 5d9745cead1f121974322b94ceadfb4d1e67960e ]

in_dev_get() can return NULL which will cause a failure once idev is
dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a
check for NULL value in idev beforehand.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230126185230.62464-1-n.zhandarovich@fintech.ru
Reviewed-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: annotate data-race around use_time

[ Upstream commit 0a9e5794b21e2d1303759ff8fe5f9215db7757ba ]

KCSAN reported multiple cpus can update use_time
at the same time.

Adds READ_ONCE()/WRITE_ONCE() annotations.

Note that 32bit arches are not fully protected,
but they will probably no longer be supported/used in 2106.

BUG: KCSAN: data-race in __xfrm_policy_check / __xfrm_policy_check

write to 0xffff88813e7ec108 of 8 bytes by interrupt on cpu 0:
__xfrm_policy_check+0x6ae/0x17f0 net/xfrm/xfrm_policy.c:3664
__xfrm_policy_check2 include/net/xfrm.h:1174 [inline]
xfrm_policy_check include/net/xfrm.h:1179 [inline]
xfrm6_policy_check+0x2e9/0x320 include/net/xfrm.h:1189
udpv6_queue_rcv_one_skb+0x48/0xa30 net/ipv6/udp.c:703
udpv6_queue_rcv_skb+0x2d6/0x310 net/ipv6/udp.c:792
udp6_unicast_rcv_skb+0x16b/0x190 net/ipv6/udp.c:935
__udp6_lib_rcv+0x84b/0x9b0 net/ipv6/udp.c:1020
udpv6_rcv+0x4b/0x50 net/ipv6/udp.c:1133
ip6_protocol_deliver_rcu+0x99e/0x1020 net/ipv6/ip6_input.c:439
ip6_input_finish net/ipv6/ip6_input.c:484 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
ip6_input+0xca/0x180 net/ipv6/ip6_input.c:493
dst_input include/net/dst.h:454 [inline]
ip6_rcv_finish+0x1e9/0x2d0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:302 [inline]
ipv6_rcv+0x85/0x140 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5482 [inline]
__netif_receive_skb+0x8b/0x1b0 net/core/dev.c:5596
process_backlog+0x23f/0x3b0 net/core/dev.c:5924
__napi_poll+0x65/0x390 net/core/dev.c:6485
napi_poll net/core/dev.c:6552 [inline]
net_rx_action+0x37e/0x730 net/core/dev.c:6663
__do_softirq+0xf2/0x2c7 kernel/softirq.c:571
do_softirq+0xb1/0xf0 kernel/softirq.c:472
__local_bh_enable_ip+0x6f/0x80 kernel/softirq.c:396
__raw_read_unlock_bh include/linux/rwlock_api_smp.h:257 [inline]
_raw_read_unlock_bh+0x17/0x20 kernel/locking/spinlock.c:284
wg_socket_send_skb_to_peer+0x107/0x120 drivers/net/wireguard/socket.c:184
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

write to 0xffff88813e7ec108 of 8 bytes by interrupt on cpu 1:
__xfrm_policy_check+0x6ae/0x17f0 net/xfrm/xfrm_policy.c:3664
__xfrm_policy_check2 include/net/xfrm.h:1174 [inline]
xfrm_policy_check include/net/xfrm.h:1179 [inline]
xfrm6_policy_check+0x2e9/0x320 include/net/xfrm.h:1189
udpv6_queue_rcv_one_skb+0x48/0xa30 net/ipv6/udp.c:703
udpv6_queue_rcv_skb+0x2d6/0x310 net/ipv6/udp.c:792
udp6_unicast_rcv_skb+0x16b/0x190 net/ipv6/udp.c:935
__udp6_lib_rcv+0x84b/0x9b0 net/ipv6/udp.c:1020
udpv6_rcv+0x4b/0x50 net/ipv6/udp.c:1133
ip6_protocol_deliver_rcu+0x99e/0x1020 net/ipv6/ip6_input.c:439
ip6_input_finish net/ipv6/ip6_input.c:484 [inline]
NF_HOOK include/linux/netfilter.h:302 [inline]
ip6_input+0xca/0x180 net/ipv6/ip6_input.c:493
dst_input include/net/dst.h:454 [inline]
ip6_rcv_finish+0x1e9/0x2d0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:302 [inline]
ipv6_rcv+0x85/0x140 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5482 [inline]
__netif_receive_skb+0x8b/0x1b0 net/core/dev.c:5596
process_backlog+0x23f/0x3b0 net/core/dev.c:5924
__napi_poll+0x65/0x390 net/core/dev.c:6485
napi_poll net/core/dev.c:6552 [inline]
net_rx_action+0x37e/0x730 net/core/dev.c:6663
__do_softirq+0xf2/0x2c7 kernel/softirq.c:571
do_softirq+0xb1/0xf0 kernel/softirq.c:472
__local_bh_enable_ip+0x6f/0x80 kernel/softirq.c:396
__raw_read_unlock_bh include/linux/rwlock_api_smp.h:257 [inline]
_raw_read_unlock_bh+0x17/0x20 kernel/locking/spinlock.c:284
wg_socket_send_skb_to_peer+0x107/0x120 drivers/net/wireguard/socket.c:184
wg_packet_create_data_done drivers/net/wireguard/send.c:251 [inline]
wg_packet_tx_worker+0x142/0x360 drivers/net/wireguard/send.c:276
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308

value changed: 0x0000000063c62d6f -> 0x0000000063c62d70

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4185 Comm: kworker/1:2 Tainted: G W 6.2.0-rc4-syzkaller-00009-gd532dd102151-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: wg-crypt-wg0 wg_packet_tx_worker

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/IPoIB: Fix legacy IPoIB due to wrong number of queues

[ Upstream commit e632291a2dbce45a24cddeb5fe28fe71d724ba43 ]

The cited commit creates child PKEY interfaces over netlink will
multiple tx and rx queues, but some devices doesn't support more than 1
tx and 1 rx queues. This causes to a crash when traffic is sent over the
PKEY interface due to the parent having a single queue but the child
having multiple queues.

This patch fixes the number of queues to 1 for legacy IPoIB at the
earliest possible point in time.

BUG: kernel NULL pointer dereference, address: 000000000000036b
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 209665 Comm: python3 Not tainted 6.1.0_for_upstream_min_debug_2022_12_12_17_02 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:kmem_cache_alloc+0xcb/0x450
Code: ce 7e 49 8b 50 08 49 83 78 10 00 4d 8b 28 0f 84 cb 02 00 00 4d 85 ed 0f 84 c2 02 00 00 41 8b 44 24 28 48 8d 4a
01 49 8b 3c 24 <49> 8b 5c 05 00 4c 89 e8 65 48 0f c7 0f 0f 94 c0 84 c0 74 b8 41 8b
RSP: 0018:ffff88822acbbab8 EFLAGS: 00010202
RAX: 0000000000000070 RBX: ffff8881c28e3e00 RCX: 00000000064f8dae
RDX: 00000000064f8dad RSI: 0000000000000a20 RDI: 0000000000030d00
RBP: 0000000000000a20 R08: ffff8882f5d30d00 R09: ffff888104032f40
R10: ffff88810fade828 R11: 736f6d6570736575 R12: ffff88810081c000
R13: 00000000000002fb R14: ffffffff817fc865 R15: 0000000000000000
FS:  00007f9324ff9700(0000) GS:ffff8882f5d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000036b CR3: 00000001125af004 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 skb_clone+0x55/0xd0
 ip6_finish_output2+0x3fe/0x690
 ip6_finish_output+0xfa/0x310
 ip6_send_skb+0x1e/0x60
 udp_v6_send_skb+0x1e5/0x420
 udpv6_sendmsg+0xb3c/0xe60
 ? ip_mc_finish_output+0x180/0x180
 ? __switch_to_asm+0x3a/0x60
 ? __switch_to_asm+0x34/0x60
 sock_sendmsg+0x33/0x40
 __sys_sendto+0x103/0x160
 ? _copy_to_user+0x21/0x30
 ? kvm_clock_get_cycles+0xd/0x10
 ? ktime_get_ts64+0x49/0xe0
 __x64_sys_sendto+0x25/0x30
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f9374f1ed14
Code: 42 41 f8 ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b
7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 68 41 f8 ff 48 8b
RSP: 002b:00007f9324ff7bd0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f9324ff7cc8 RCX: 00007f9374f1ed14
RDX: 00000000000002fb RSI: 00007f93000052f0 RDI: 0000000000000030
RBP: 0000000000000000 R08: 00007f9324ff7d40 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
R13: 000000012a05f200 R14: 0000000000000001 R15: 00007f9374d57bdc
 </TASK>

Fixes: dbc94a0fb817 ("IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/95eb6b74c7cf49fa46281f9d056d685c9fa11d38.1674584576.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr()

[ Upstream commit b6ee896385380aa621102e8ea402ba12db1cabff ]

  int type = nla_type(nla);

  if (type > XFRMA_MAX) {
            return -EOPNOTSUPP;
  }

@type is then used as an array index and can be used
as a Spectre v1 gadget.

  if (nla_len(nla) < compat_policy[type].len) {

array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.

Fixes: 5106f4a8acff ("xfrm/compat: Add 32=>64-bit messages translator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Restore allocated resources on failed copyout

[ Upstream commit 6601fc0d15ffc20654e39486f9bef35567106d68 ]

Fix a resource leak if an error occurs.

Fixes: f404ca4c7ea8 ("IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTL")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/167354736291.2132367.10894218740150168180.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: compat: change expression for switch in xfrm_xlate64

[ Upstream commit eb6c59b735aa6cca77cdbb59cc69d69a0d63d986 ]

Compare XFRM_MSG_NEWSPDINFO (value from netlink
configuration messages enum) with nlh_src->nlmsg_type
instead of nlh_src->nlmsg_type - XFRM_MSG_BASE.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4e9505064f58 ("net/xfrm/compat: Copy xfrm_spdattr_type_t atributes")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Dmitry Safonov <0x7f454c46@gmail.com>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech: Disable hi-res scrolling on USB

commit 690eb7dec72ae52d1d710d14a451844b4d0f4f19 upstream.

On some Logitech mice, such as the G903, and possibly the G403, the HID
events are generated on a different interface to the HID++ one.

If we enable hi-res through the HID++ interface, the HID interface
wouldn't know anything about it, and handle the events as if they were
regular scroll events, making the mouse unusable.

Disable hi-res scrolling on those devices until we implement scroll
events through HID++.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216885
Fixes: 908d325e1665 ("HID: logitech-hidpp: Detect hi-res scrolling support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230203101800.139380-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: j1939: do not wait 250 ms if the same addr was already claimed

commit 4ae5e1e97c44f4654516c1d41591a462ed62fa7b upstream.

The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states:
  d) No CF shall begin, or resume, transmission on the network until 250
     ms after it has successfully claimed an address except when
     responding to a request for address-claimed.

But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim
prioritization" show that the CF begins the transmission after 250 ms
from the first AC (address-claimed) message even if it sends another AC
message during that time window to resolve the address contention with
another CF.

As stated in "4.4.2.3 - Address-claimed message":
  In order to successfully claim an address, the CF sending an address
  claimed message shall not receive a contending claim from another CF
  for at least 250 ms.

As stated in "4.4.3.2 - NAME management (NM) message":
  1) A commanding CF can
     d) request that a CF with a specified NAME transmit the address-
        claimed message with its current NAME.
  2) A target CF shall
     d) send an address-claimed message in response to a request for a
        matching NAME

Taking the above arguments into account, the 250 ms wait is requested
only during network initialization.

Do not restart the timer on AC message if both the NAME and the address
match and so if the address has already been claimed (timer has expired)
or the AC message has been sent to resolve the contention with another
CF (timer is still running).

Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/address: Return an error when no valid dma-ranges are found

commit f6933c01e42d2fc83b9133ed755609e4aac6eadd upstream.

Commit 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.

This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.

Fixes: 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Luca Di Stefano <luca.distefano@linaro.org>
Cc: 993612@bugs.debian.org
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230126-synquacer-boot-v2-1-cb80fd23c4e2@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw

commit 3e46d910d8acf94e5360126593b68bf4fee4c4a1 upstream.

poll() and select() on per_cpu trace_pipe and trace_pipe_raw do not work
since kernel 6.1-rc6. This issue is seen after the commit
42fb0a1e84ff525ebe560e2baf9451ab69127e2b ("tracing/ring-buffer: Have
polling block on watermark").

This issue is firstly detected and reported, when testing the CXL error
events in the rasdaemon and also erified using the test application for poll()
and select().

This issue occurs for the per_cpu case, when calling the ring_buffer_poll_wait(),
in kernel/trace/ring_buffer.c, with the buffer_percent > 0 and then wait until the
percentage of pages are available. The default value set for the buffer_percent is 50
in the kernel/trace/trace.c.

As a fix, allow userspace application could set buffer_percent as 0 through
the buffer_percent_fops, so that the task will wake up as soon as data is added
to any of the specific cpu buffer.

Link: https://lore.kernel.org/linux-trace-kernel/20230202182309.742-2-shiju.jose@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mchehab@kernel.org>
Cc: <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 42fb0a1e84ff5 ("tracing/ring-buffer: Have polling block on watermark")
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI/ASPM: Refactor L1 PM Substates Control Register programming"

commit ff209ecc376a2ea8dd106a1f594427a5d94b7dd3 upstream.

This reverts commit 5e85eba6f50dc288c22083a7e213152bcc4b8208.

Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates
Control Register programming") broke suspend/resume on a Tuxedo
Infinitybook S 14 v5, which seems to use a Clevo L140CU Mainboard.

The main symptom is:

  iwlwifi 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
  nvme 0000:03:00.0: Unable to change power state from D3hot to D0, device inaccessible

and the machine is only partially usable after resume.  It can't run dmesg
and can't do a clean reboot.  This happens on every suspend/resume cycle.

Revert 5e85eba6f50d until we can figure out the root cause.

Fixes: 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates Control Register programming")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"

commit a7152be79b627428c628da2a887ca4b2512a78fd upstream.

This reverts commit 4ff116d0d5fd8a025604b0802d93a2d5f4e465d1.

Tasev Nikola and Mark Enriquez reported that resume from suspend was broken
in v6.1-rc1.  Tasev bisected to a47126ec29f5 ("PCI/PTM: Cache PTM
Capability offset"), but we can't figure out how that could be related.

Mark saw the same symptoms and bisected to 4ff116d0d5fd ("PCI/ASPM: Save L1
PM Substates Capability for suspend/resume"), which does have a connection:
it restores L1 Substates configuration while ASPM L1 may be enabled:

  pci_restore_state
    pci_restore_aspm_l1ss_state
      aspm_program_l1ss
        pci_write_config_dword(PCI_L1SS_CTL1, ctl1)         # L1SS restore
    pci_restore_pcie_state
      pcie_capability_write_word(PCI_EXP_LNKCTL, cap[i++])  # L1 restore

which is a problem because PCIe r6.0, sec 5.5.4, requires that:

  If setting either or both of the enable bits for ASPM L1 PM
  Substates, both ports must be configured as described in this
  section while ASPM L1 is disabled.

Separately, Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1
PM Substates Control Register programming") broke suspend/resume, and it
depends on 4ff116d0d5fd.

Revert 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") to fix the resume issue and enable revert of 5e85eba6f50d
to fix the issue Thomas reported.

Note that reverting 4ff116d0d5fd means L1 Substates config may be lost on
suspend/resume.  As far as we know the system will use more power but will
still *work* correctly.

Fixes: 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Tasev Nikola <tasev.stefanoska@skynet.be>
Reported-by: Mark Enriquez <enriquezmark36@gmail.com>
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Mark Enriquez <enriquezmark36@gmail.com>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.

commit 6c4715aa5b0ab1c0d35780b7c552e952dbb5515d upstream.

There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to
make mic-mute/audio-mute working.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207083011.100189-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41

commit 7a17e8423a133a6ac238462126d7f88faaccc681 upstream.

This Asus Zenbook laptop use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230206150019.3825120-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9

commit 9a6804aa1c92cd28e89e746ace44d5ba101db76c upstream.

The HP Elitebook 645 G9 laptop (with motherboard model 89D2) uses the
ALC236 codec and requires the alc236_fixup_hp_mute_led_micmute_vref
fixup in order to enable mute/micmute LEDs.

Note: the alc236_fixup_hp_gpio_led fixup, which is used by the Elitebook
640 G9, does not work with the 645 G9.

[ rearranged the entry in SSID order -- tiwai ]

Signed-off-by: Elvis Angelaccio <elvis.angelaccio@kde.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4055cb48-e228-8a13-524d-afbb7aaafebe@kde.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360

commit bd401fd730cbcb0717bbc5438f15084db10f9259 upstream.

Samsung Galaxy Book2 Pro 360 (13" 2022 NP930QED-KA1FR) with codec SSID
144d:ca03 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.

Cc: <stable@vger.kernel.org>
Signed-off-by: Guillaume Pinot <texitoi@texitoi.eu>
Link: https://lore.kernel.org/r/20230129171338.17249-1-texitoi@texitoi.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()

commit 6a32425f953b955b4ff82f339d01df0b713caa5d upstream.

snd_emux_xg_control() can be called with an argument 'param' greater
than size of 'control' array. It may lead to accessing 'control'
array at a wrong index.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207132026.2870-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add Positivo N14KP6-TG

commit 88d18b8896bd98e636b632f805b7e84e61458255 upstream.

Positivo N14KP6-TG (1c6c:1251)
require quirk for enabling headset-mic

Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207183720.2519-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zlib: zero-initialize zlib workspace

commit eadd7deca0ad8a83edb2b894d8326c78e78635d6 upstream.

KMSAN reports uses of uninitialized memory in zlib's longest_match()
called on memory originating from zlib_alloc_workspace().
This issue is known by zlib maintainers and is claimed to be harmless,
but to be on the safe side we'd better initialize the memory.

Link: https://zlib.net/zlib_faq.html#faq36
Reported-by: syzbot+14d9e7602ebdf7ec0a60@syzkaller.appspotmail.com
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: limit device extents to the device size

commit 3c538de0f2a74d50aff7278c092f88ae59cee688 upstream.

There was a recent regression in btrfs/177 that started happening with
the size class patches ("btrfs: introduce size class to block group
allocator").  This however isn't a regression introduced by those
patches, but rather the bug was uncovered by a change in behavior in
these patches.  The patches triggered more chunk allocations in the
^free-space-tree case, which uncovered a race with device shrink.

The problem is we will set the device total size to the new size, and
use this to find a hole for a device extent.  However during shrink we
may have device extents allocated past this range, so we could
potentially find a hole in a range past our new shrink size.  We don't
actually limit our found extent to the device size anywhere, we assume
that we will not find a hole past our device size.  This isn't true with
shrink as we're relocating block groups and thus creating holes past the
device size.

Fix this by making sure we do not search past the new device size, and
if we wander into any device extents that start after our device size
simply break from the loop and use whatever hole we've already found.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC

commit c6aa9d3b43cd11ac13a8220368a3b0483c6751d4 upstream.

Memory allocations in the network transmit path must use GFP_ATOMIC
so they won't sleep.

Reported-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/lkml/8a4d08f94d3e6fe8b6da68440eaa89a088ad84f9.camel@redhat.com/
Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1675714317-48577-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.11

Link: https://lore.kernel.org/r/20230207125634.292109991@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Skip invalid kfunc call in backtrack_insn

commit d3178e8a434b58678d99257c0387810a24042fb6 upstream.

The verifier skips invalid kfunc call in check_kfunc_call(), which
would be captured in fixup_kfunc_call() if such insn is not eliminated
by dead code elimination. However, this can lead to the following
warning in backtrack_insn(), also see [1]:

  ------------[ cut here ]------------
  verifier backtracking bug
  WARNING: CPU: 6 PID: 8646 at kernel/bpf/verifier.c:2756 backtrack_insn
  kernel/bpf/verifier.c:2756
__mark_chain_precision kernel/bpf/verifier.c:3065
mark_chain_precision kernel/bpf/verifier.c:3165
adjust_reg_min_max_vals kernel/bpf/verifier.c:10715
check_alu_op kernel/bpf/verifier.c:10928
do_check kernel/bpf/verifier.c:13821 [inline]
do_check_common kernel/bpf/verifier.c:16289
  [...]

So make backtracking conservative with this by returning ENOTSUPP.

  [1] https://lore.kernel.org/bpf/CACkBjsaXNceR8ZjkLG=dT3P=4A8SBsg0Z5h5PWLryF5=ghKq=g@mail.gmail.com/

Reported-by: syzbot+4da3ff23081bafe74fc2@syzkaller.appspotmail.com
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230104014709.9375-1-sunhao.th@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Always check inode size of inline inodes

commit 70376c7ff31221f1d21db5611d8209e677781d3a upstream.

Check if the inode size of stuffed (inline) inodes is within the allowed
range when reading inodes from disk (gfs2_dinode_in()).  This prevents
us from on-disk corruption.

The two checks in stuffed_readpage() and gfs2_unstuffer_page() that just
truncate inline data to the maximum allowed size don't actually make
sense, and they can be removed now as well.

Reported-by: syzbot+7bb81dfa9cda07d9cd9d@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Cosmetic gfs2_dinode_{in,out} cleanup

commit 7db354444ad8429e660b0f8145d425285d4f90ff upstream.

In each of the two functions, add an inode variable that points to
&ip->i_inode and use that throughout the rest of the function.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: brcmfmac: Check the count value of channel spec to prevent out-of-bounds reads

commit 4920ab131b2dbae7464b72bdcac465d070254209 upstream.

This patch fixes slab-out-of-bounds reads in brcmfmac that occur in
brcmf_construct_chaninfo() and brcmf_enable_bw40_2g() when the count
value of channel specifications provided by the device is greater than
the length of 'list->element[]', decided by the size of the 'list'
allocated with kzalloc(). The patch adds checks that make the functions
free the buffer and return -EINVAL if that is the case. Note that the
negative return is handled by the caller, brcmf_setup_wiphybands() or
brcmf_cfg80211_attach().

Found by a modified version of syzkaller.

Crash Report from brcmf_construct_chaninfo():
==================================================================
BUG: KASAN: slab-out-of-bounds in brcmf_setup_wiphybands+0x1238/0x1430
Read of size 4 at addr ffff888115f24600 by task kworker/0:2/1896

CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G        W  O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 print_address_description.constprop.0.cold+0x93/0x334
 kasan_report.cold+0x83/0xdf
 brcmf_setup_wiphybands+0x1238/0x1430
 brcmf_cfg80211_attach+0x2118/0x3fd0
 brcmf_attach+0x389/0xd40
 brcmf_usb_probe+0x12de/0x1690
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_set_configuration+0x984/0x1770
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_new_device.cold+0x463/0xf66
 hub_event+0x10d5/0x3330
 process_one_work+0x873/0x13e0
 worker_thread+0x8b/0xd10
 kthread+0x379/0x450
 ret_from_fork+0x1f/0x30

Allocated by task 1896:
 kasan_save_stack+0x1b/0x40
 __kasan_kmalloc+0x7c/0x90
 kmem_cache_alloc_trace+0x19e/0x330
 brcmf_setup_wiphybands+0x290/0x1430
 brcmf_cfg80211_attach+0x2118/0x3fd0
 brcmf_attach+0x389/0xd40
 brcmf_usb_probe+0x12de/0x1690
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_set_configuration+0x984/0x1770
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_new_device.cold+0x463/0xf66
 hub_event+0x10d5/0x3330
 process_one_work+0x873/0x13e0
 worker_thread+0x8b/0xd10
 kthread+0x379/0x450
 ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff888115f24000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1536 bytes inside of
 2048-byte region [ffff888115f24000, ffff888115f24800)

Memory state around the buggy address:
 ffff888115f24500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff888115f24580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888115f24600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffff888115f24680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888115f24700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Crash Report from brcmf_enable_bw40_2g():
==================================================================
BUG: KASAN: slab-out-of-bounds in brcmf_cfg80211_attach+0x3d11/0x3fd0
Read of size 4 at addr ffff888103787600 by task kworker/0:2/1896

CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G        W  O      5.14.0+ #132
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack_lvl+0x57/0x7d
 print_address_description.constprop.0.cold+0x93/0x334
 kasan_report.cold+0x83/0xdf
 brcmf_cfg80211_attach+0x3d11/0x3fd0
 brcmf_attach+0x389/0xd40
 brcmf_usb_probe+0x12de/0x1690
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_set_configuration+0x984/0x1770
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_new_device.cold+0x463/0xf66
 hub_event+0x10d5/0x3330
 process_one_work+0x873/0x13e0
 worker_thread+0x8b/0xd10
 kthread+0x379/0x450
 ret_from_fork+0x1f/0x30

Allocated by task 1896:
 kasan_save_stack+0x1b/0x40
 __kasan_kmalloc+0x7c/0x90
 kmem_cache_alloc_trace+0x19e/0x330
 brcmf_cfg80211_attach+0x3302/0x3fd0
 brcmf_attach+0x389/0xd40
 brcmf_usb_probe+0x12de/0x1690
 usb_probe_interface+0x25f/0x710
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_set_configuration+0x984/0x1770
 usb_generic_driver_probe+0x69/0x90
 usb_probe_device+0x9c/0x220
 really_probe+0x1be/0xa90
 __driver_probe_device+0x2ab/0x460
 driver_probe_device+0x49/0x120
 __device_attach_driver+0x18a/0x250
 bus_for_each_drv+0x123/0x1a0
 __device_attach+0x207/0x330
 bus_probe_device+0x1a2/0x260
 device_add+0xa61/0x1ce0
 usb_new_device.cold+0x463/0xf66
 hub_event+0x10d5/0x3330
 process_one_work+0x873/0x13e0
 worker_thread+0x8b/0xd10
 kthread+0x379/0x450
 ret_from_fork+0x1f/0x30

The buggy address belongs to the object at ffff888103787000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1536 bytes inside of
 2048-byte region [ffff888103787000, ffff888103787800)

Memory state around the buggy address:
 ffff888103787500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff888103787580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888103787600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffff888103787680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff888103787700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr>
Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr>
Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221116142952.518241-1-linuxlovemin@yonsei.ac.kr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix to do sanity check on i_extra_isize in is_alive()

commit d3b7b4afd6b2c344eabf9cc26b8bfa903c164c7c upstream.

syzbot found a f2fs bug:

BUG: KASAN: slab-out-of-bounds in data_blkaddr fs/f2fs/f2fs.h:2891 [inline]
BUG: KASAN: slab-out-of-bounds in is_alive fs/f2fs/gc.c:1117 [inline]
BUG: KASAN: slab-out-of-bounds in gc_data_segment fs/f2fs/gc.c:1520 [inline]
BUG: KASAN: slab-out-of-bounds in do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734
Read of size 4 at addr ffff888076557568 by task kworker/u4:3/52

CPU: 1 PID: 52 Comm: kworker/u4:3 Not tainted 6.1.0-rc4-syzkaller-00362-gfef7fd48922d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: writeback wb_workfn (flush-7:0)
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x45d mm/kasan/report.c:395
kasan_report+0xbb/0x1f0 mm/kasan/report.c:495
data_blkaddr fs/f2fs/f2fs.h:2891 [inline]
is_alive fs/f2fs/gc.c:1117 [inline]
gc_data_segment fs/f2fs/gc.c:1520 [inline]
do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734
f2fs_gc+0x88c/0x20a0 fs/f2fs/gc.c:1831
f2fs_balance_fs+0x544/0x6b0 fs/f2fs/segment.c:410
f2fs_write_inode+0x57e/0xe20 fs/f2fs/inode.c:753
write_inode fs/fs-writeback.c:1440 [inline]
__writeback_single_inode+0xcfc/0x1440 fs/fs-writeback.c:1652
writeback_sb_inodes+0x54d/0xf90 fs/fs-writeback.c:1870
wb_writeback+0x2c5/0xd70 fs/fs-writeback.c:2044
wb_do_writeback fs/fs-writeback.c:2187 [inline]
wb_workfn+0x2dc/0x12f0 fs/fs-writeback.c:2227
process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306

The root cause is that we forgot to do sanity check on .i_extra_isize
in below path, result in accessing invalid address later, fix it.
- gc_data_segment
 - is_alive
  - data_blkaddr
   - offset_in_addr

Reported-by: syzbot+f8f3dfa4abc489e768a1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-f2fs-devel/0000000000003cb3c405ed5c17f9@google.com/T/#u
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: smscufx: fix error handling code in ufx_usb_probe

commit b76449ee75e21acfe9fa4c653d8598f191ed7d68 upstream.

The current error handling code in ufx_usb_probe have many unmatching
issues, e.g., missing ufx_free_usb_list, destroy_modedb label should
only include framebuffer_release, fb_dealloc_cmap only matches
fb_alloc_cmap.

My local syzkaller reports a memory leak bug:

memory leak in ufx_usb_probe

BUG: memory leak
unreferenced object 0xffff88802f879580 (size 128):
  comm "kworker/0:7", pid 17416, jiffies 4295067474 (age 46.710s)
  hex dump (first 32 bytes):
    80 21 7c 2e 80 88 ff ff 18 d0 d0 0c 80 88 ff ff  .!|.............
    00 d0 d0 0c 80 88 ff ff e0 ff ff ff 0f 00 00 00  ................
  backtrace:
    [<ffffffff814c99a0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1045
    [<ffffffff824d219c>] kmalloc include/linux/slab.h:553 [inline]
    [<ffffffff824d219c>] kzalloc include/linux/slab.h:689 [inline]
    [<ffffffff824d219c>] ufx_alloc_urb_list drivers/video/fbdev/smscufx.c:1873 [inline]
    [<ffffffff824d219c>] ufx_usb_probe+0x11c/0x15a0 drivers/video/fbdev/smscufx.c:1655
    [<ffffffff82d17927>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
    [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
    [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778
    [<ffffffff827132da>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:808
    [<ffffffff82713c27>] __device_attach_driver+0xf7/0x150 drivers/base/dd.c:936
    [<ffffffff82710137>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff827136b5>] __device_attach+0x105/0x2d0 drivers/base/dd.c:1008
    [<ffffffff82711d36>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff8270e242>] device_add+0x642/0xdc0 drivers/base/core.c:3517
    [<ffffffff82d14d5f>] usb_set_configuration+0x8ef/0xb80 drivers/usb/core/message.c:2170
    [<ffffffff82d2576c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<ffffffff82d16ffc>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
    [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
    [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778

Fix this bug by rewriting the error handling code in ufx_usb_probe.

Reported-by: syzkaller <syzkaller@googlegroups.com>
Tested-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: initialize locks earlier in f2fs_fill_super()

commit 92b4cf5b48955a4bdd15fe4e2067db8ebd87f04c upstream.

syzbot is reporting lockdep warning at f2fs_handle_error() [1], for
spin_lock(&sbi->error_lock) is called before spin_lock_init() is called.
For safe locking in error handling, move initialization of locks (and
obvious structures) in f2fs_fill_super() to immediately after memory
allocation.

Link: https://syzkaller.appspot.com/bug?extid=40642be9b7e0bb28e0df
Reported-by: syzbot <syzbot+40642be9b7e0bb28e0df@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+40642be9b7e0bb28e0df@syzkaller.appspotmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: Use "buf" flexible array for memcpy() destination

commit cf8aa9bf97cadf85745506c6a3e244b22c268d63 upstream.

The "buf" flexible array needs to be the memcpy() destination to avoid
false positive run-time warning from the recent FORTIFY_SOURCE
hardening:

  memcpy: detected field-spanning write (size 93) of single field "&fh->fb"
  at fs/overlayfs/export.c:799 (size 21)

Reported-by: syzbot+9d14351a171d0d1c7955@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000763a6c05e95a5985@google.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Validate attribute data and valid sizes

commit 019d22eb0eb707fc099e6e8fad9b3933236a06d0 upstream.

The data_size and valid_size fields of non resident attributes should be
less than the its alloc_size field, but this is not checked in
ntfs_read_mft function.

Syzbot reports a allocation order warning due to a large unchecked value
of data_size getting assigned to inode->i_size which is then passed to
kcalloc.

Add sanity check for ensuring that the data_size and valid_size fields
are not larger than alloc_size field.

Link: https://syzkaller.appspot.com/bug?extid=fa4648a5446460b7b963
Reported-and-tested-by: syzbot+fa4648a5446460b7b963@syzkaller.appspotmail.com
Fixes: (82cae269cfa95) fs/ntfs3: Add initialization of super block
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/imc-pmu: Revert nest_init_lock to being a mutex

commit ad53db4acb415976761d7302f5b02e97f2bd097e upstream.

The recent commit 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in
IRQs disabled section") fixed warnings (and possible deadlocks) in the
IMC PMU driver by converting the locking to use spinlocks.

It also converted the init-time nest_init_lock to a spinlock, even
though it's not used at runtime in IRQ disabled sections or while
holding other spinlocks.

This leads to warnings such as:

  BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:49
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
  preempt_count: 1, expected: 0
  CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc2-14719-gf12cd06109f4-dirty #1
  Hardware name: Mambo,Simulated-System POWER9 0x4e1203 opal:v6.6.6 PowerNV
  Call Trace:
    dump_stack_lvl+0x74/0xa8 (unreliable)
    __might_resched+0x178/0x1a0
    __cpuhp_setup_state+0x64/0x1e0
    init_imc_pmu+0xe48/0x1250
    opal_imc_counters_probe+0x30c/0x6a0
    platform_probe+0x78/0x110
    really_probe+0x104/0x420
    __driver_probe_device+0xb0/0x170
    driver_probe_device+0x58/0x180
    __driver_attach+0xd8/0x250
    bus_for_each_dev+0xb4/0x140
    driver_attach+0x34/0x50
    bus_add_driver+0x1e8/0x2d0
    driver_register+0xb4/0x1c0
    __platform_driver_register+0x38/0x50
    opal_imc_driver_init+0x2c/0x40
    do_one_initcall+0x80/0x360
    kernel_init_freeable+0x310/0x3b8
    kernel_init+0x30/0x1a0
    ret_from_kernel_thread+0x5c/0x64

Fix it by converting nest_init_lock back to a mutex, so that we can call
sleeping functions while holding it. There is no interaction between
nest_init_lock and the runtime spinlocks used by the actual PMU routines.

Fixes: 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Tested-by: Kajol Jain<kjain@linux.ibm.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230130014401.540543-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Fix local irq disable when PMIs are disabled

commit bc88ef663265676419555df2dc469a471c0add31 upstream.

When PMI interrupts are soft-masked, local_irq_save() will clear the PMI
mask bit, allowing PMIs in and causing a race condition. This causes a
deadlock in native_hpte_insert via hash_preload, which depends on PMIs
being disabled since commit 8b91cee5eadd ("powerpc/64s/hash: Make hash
faults work in NMI context"). native_hpte_insert calls local_irq_save().
It's possible the lpar hash code is also affected when tracing is
enabled because __trace_hcall_entry() calls local_irq_save().

Fix this by making arch_local_irq_save() _or_ the IRQS_DISABLED bit into
the mask.

This was found with the stress_hpt option with a kbuild workload running
together with `perf record -g`.

Fixes: f442d004806e ("powerpc/64s: Add support to mask perf interrupts and replay them")
Fixes: 8b91cee5eadd ("powerpc/64s/hash: Make hash faults work in NMI context")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Just take the fix without the new warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230121095352.2823517-1-npiggin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s/radix: Fix crash with unaligned relocated kernel

commit 98d0219e043e09013e883eacde3b93e0b2bf944d upstream.

If a relocatable kernel is loaded at an address that is not 2MB aligned
and told not to relocate to zero, the kernel can crash due to
mark_rodata_ro() incorrectly changing some read-write data to read-only.

Scenarios where the misalignment can occur are when the kernel is
loaded by kdump or using the RELOCATABLE_TEST config option.

Example crash with the kernel loaded at 5MB:

  Run /sbin/init as init process
  BUG: Unable to handle kernel data access on write at 0xc000000000452000
  Faulting instruction address: 0xc0000000005b6730
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
  CPU: 1 PID: 1 Comm: init Not tainted 6.2.0-rc1-00011-g349188be4841 #166
  Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,git-5b4c5a hv:linux,kvm pSeries
  NIP:  c0000000005b6730 LR: c000000000ae9ab8 CTR: 0000000000000380
  REGS: c000000004503250 TRAP: 0300   Not tainted  (6.2.0-rc1-00011-g349188be4841)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 44288480  XER: 00000000
  CFAR: c0000000005b66ec DAR: c000000000452000 DSISR: 0a000000 IRQMASK: 0
  ...
  NIP memset+0x68/0x104
  LR  zero_user_segments.constprop.0+0xa8/0xf0
  Call Trace:
    ext4_mpage_readpages+0x7f8/0x830
    ext4_readahead+0x48/0x60
    read_pages+0xb8/0x380
    page_cache_ra_unbounded+0x19c/0x250
    filemap_fault+0x58c/0xae0
    __do_fault+0x60/0x100
    __handle_mm_fault+0x1230/0x1a40
    handle_mm_fault+0x120/0x300
    ___do_page_fault+0x20c/0xa80
    do_page_fault+0x30/0xc0
    data_access_common_virt+0x210/0x220

This happens because mark_rodata_ro() tries to change permissions on the
range _stext..__end_rodata, but _stext sits in the middle of the 2MB
page from 4MB to 6MB:

  radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
  radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
  radix-mmu: Mapped 0x0000000000400000-0x0000000002400000 with 2.00 MiB pages (exec)

The logic that changes the permissions assumes the linear mapping was
split correctly at boot, so it marks the entire 2MB page read-only. That
leads to the write fault above.

To fix it, the boot time mapping logic needs to consider that if the
kernel is running at a non-zero address then _stext is a boundary where
it must split the mapping.

That leads to the mapping being split correctly, allowing the rodata
permission change to take happen correctly, with no spillover:

  radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
  radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
  radix-mmu: Mapped 0x0000000000400000-0x0000000000500000 with 64.0 KiB pages
  radix-mmu: Mapped 0x0000000000500000-0x0000000000600000 with 64.0 KiB pages (exec)
  radix-mmu: Mapped 0x0000000000600000-0x0000000002400000 with 2.00 MiB pages (exec)

If the kernel is loaded at a 2MB aligned address, the mapping continues
to use 2MB pages as before:

  radix-mmu: Mapped 0x0000000000000000-0x0000000000200000 with 2.00 MiB pages (exec)
  radix-mmu: Mapped 0x0000000000200000-0x0000000000400000 with 2.00 MiB pages
  radix-mmu: Mapped 0x0000000000400000-0x0000000002c00000 with 2.00 MiB pages (exec)
  radix-mmu: Mapped 0x0000000002c00000-0x0000000100000000 with 2.00 MiB pages

Fixes: c55d7b5e6426 ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230110124753.1325426-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:twl6030: Enable measurement of VAC

commit bffb7d9d1a3dbd09e083b88aefd093b3b10abbfb upstream.

VAC needs to be wired up to produce proper measurements,
without this change only near zero values are reported.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 1696f36482e7 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: sof-audio: prepare_widgets: Check swidget for NULL on sink failure

commit fb4293600cc651cfe4d48ec489f1d175adf6e2f8 upstream.

If the swidget is NULL we skip the preparing of the widget and jump to
handle the sink path of the widget.
If the prepare fails in this case we would undo the prepare but the swidget
is NULL (we skipped the prepare for the widget).

To avoid NULL pointer dereference in this case we must check swidget
against NULL pointer once again.

Fixes: 0ad84b11f2f8 ("ASoC: SOF: sof-audio: skip prepare/unprepare if swidget is NULL")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230120102125.30653-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86/amd: pmc: add CONFIG_SERIO dependency

commit abce209d18fd26e865b2406cc68819289db973f9 upstream.

Using the serio subsystem now requires the code to be reachable:

x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler':
pmc.c:(.text+0x86c): undefined reference to `serio_bus'

Add the usual dependency: as other users of serio use 'select'
rather than 'depends on', use the same here.

Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dma: Fix DMA Rx rearm race

commit 57e9af7831dcf211c5c689c2a6f209f4abdf0bce upstream.

As DMA Rx can be completed from two places, it is possible that DMA Rx
completes before DMA completion callback had a chance to complete it.
Once the previous DMA Rx has been completed, a new one can be started
on the next UART interrupt. The following race is possible
(uart_unlock_and_check_sysrq_irqrestore() replaced with
spin_unlock_irqrestore() for simplicity/clarity):

CPU0 CPU1
dma_rx_complete()
serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma_flush()
      __dma_rx_complete()
        dma->rx_running = 0
        // Complete DMA Rx
  spin_unlock_irqrestore(&port->lock)

serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma()
      dma->rx_running = 1
      // Setup a new DMA Rx
  spin_unlock_irqrestore(&port->lock)

  spin_lock_irqsave(&port->lock)
  // sees dma->rx_running = 1
  __dma_rx_complete()
    dma->rx_running = 0
    // Incorrectly complete
    // running DMA Rx

This race seems somewhat theoretical to occur for real but handle it
correctly regardless. Check what is the DMA status before complething
anything in __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dma: Fix DMA Rx completion race

commit 31352811e13dc2313f101b890fd4b1ce760b5fe7 upstream.

__dma_rx_complete() is called from two places:
  - Through the DMA completion callback dma_rx_complete()
  - From serial8250_rx_dma_flush() after IIR_RLSI or IIR_RX_TIMEOUT
The former does not hold port's lock during __dma_rx_complete() which
allows these two to race and potentially insert the same data twice.

Extend port's lock coverage in dma_rx_complete() to prevent the race
and check if the DMA Rx is still pending completion before calling
into __dma_rx_complete().

Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Tested-by: Gilles BULOZ <gilles.buloz@kontron.com>
Fixes: 9ee4b83e51f7 ("serial: 8250: Add support for dmaengine")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230130114841.25749-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-combo: fix runtime suspend

commit c7b98de745cffdceefc077ad5cf9cda032ef8959 upstream.

Drop the confused runtime-suspend type check which effectively broke
runtime PM if the DP child node happens to be parsed before the USB
child node during probe (e.g. due to order of child nodes in the
devicetree).

Instead use the new driver data USB PHY pointer to access the USB
configuration and resources.

Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix return value

commit 0c4862b1c1465e473bc961a02765490578bf5c20 upstream.

Dan Carpenter points out that the return code was not set in commit
60c8b4aebd8e ("nvmem: core: fix cleanup after dev_set_name()"), but
this is not the only issue - we also need to zero wp_gpio to prevent
gpiod_put() being called on an error value.

Fixes: 560181d3ace6 ("nvmem: core: fix cleanup after dev_set_name()")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix cell removal on error

commit db3546d58b5a0fa581d9c9f2bdc2856fa6c5e43e upstream.

nvmem_add_cells() could return an error after some cells are already
added to the provider. In this case, the added cells are not removed.
Remove any registered cells if nvmem_add_cells() fails.

Fixes: fa72d847d68d7 ("nvmem: check the return value of nvmem_add_cells()")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix device node refcounting

commit edcf2fb660526b5ed29f93bd17328a2b4835c8b2 upstream.

In of_nvmem_cell_get(), of_get_next_parent() is used on cell_np. This
will decrement the refcount on cell_np, but cell_np is still used later
in the code. Use of_get_parent() instead and of_node_put() in the
appropriate places.

Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers")
Fixes: 7ae6478b304b ("nvmem: core: rework nvmem cell instance creation")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix registration vs use race

commit ab3428cfd9aa2f3463ee4b2909b5bb2193bd0c4a upstream.

The i.MX6 CPU frequency driver sometimes fails to register at boot time
due to nvmem_cell_read_u32() sporadically returning -ENOENT.

This happens because there is a window where __nvmem_device_get() in
of_nvmem_cell_get() is able to return the nvmem device, but as cells
have been setup, nvmem_find_cell_entry_by_node() returns NULL.

The occurs because the nvmem core registration code violates one of the
fundamental principles of kernel programming: do not publish data
structures before their setup is complete.

Fix this by making nvmem core code conform with this principle.

Fixes: eace75cfdcf7 ("nvmem: Add a simple NVMEM framework for nvmem providers")
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: fix cleanup after dev_set_name()

commit 560181d3ace61825f4ca9dd3481d6c0ee6709fa8 upstream.

If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not
put this. While a minimal fix for this would be to add the gpiod_put()
call, we can do better if we split device_register(), and use the
tested nvmem_release() cleanup code by initialising the device early,
and putting the device.

This results in a slightly larger fix, but results in clear code.

Note: this patch depends on "nvmem: core: initialise nvmem->id early"
and "nvmem: core: remove nvmem_config wp_gpio".

Fixes: 5544e90c8126 ("nvmem: core: add error handling for dev_set_name")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[Srini: Fixed subject line and error code handing with wp_gpio while applying.]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: remove nvmem_config wp_gpio

commit 569653f022a29a1a44ea9de5308b657228303fa5 upstream.

No one provides wp_gpio, so let's remove it to avoid issues with
the nvmem core putting this gpio.

Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvmem: core: initialise nvmem->id early

commit 3bd747c7ea13cb145f0d84444e00df928b0842d9 upstream.

The error path for wp_gpio attempts to free the IDA nvmem->id, but
this has yet to be assigned, so will always be zero - leaking the
ID allocated by ida_alloc(). Fix this by moving the initialisation
of nvmem->id earlier.

Fixes: f7d8d7dcd978 ("nvmem: fix memory leak in error path")
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: update wave data type to 3 for gfx11

commit ed8e793c65e4c6633e8577e40d574da8a56d2e0f upstream.

SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update
wave data type to signify a difference.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11

commit 1538709c9f1c207d30afd95ea41b3aeb973f67e7 upstream.

PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.

Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: Fix initialization for nbio 4.3.0

commit 5048fa1ebf89d03cf0ceca13fab8f800399e9ee3 upstream.

A mistake has been made on some boards with NBIO 4.3.0 where some
NBIO registers aren't properly set by the hardware.

Ensure that they're set during initialization.

Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com>
Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com>
Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix potential bit_17 double-free

commit 7057a8f126f14f14b040faecfa220fd27c6c2f85 upstream.

A userspace with multiple threads racing I915_GEM_SET_TILING to set the
tiling to I915_TILING_NONE could trigger a double free of the bit_17
bitmask.  (Or conversely leak memory on the transition to tiled.)  Move
allocation/free'ing of the bitmask within the section protected by the
obj lock.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Cc: <stable@vger.kernel.org> # v5.5+
[tursulin: Correct fixes tag and added cc stable.]
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127200550.3531984-1-robdclark@gmail.com
(cherry picked from commit 10e0cbaaf1104f449d695c80bcacf930dcd3c42e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Avoid potential vm use-after-free

commit 41d419382ec7e257e54b7b6ff0d3623aafb1316d upstream.

Adding the vm to the vm_xa table makes it visible to userspace, which
could try to race with us to close the vm.  So we need to take our extra
reference before putting it in the table.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 9ec8795e7d91 ("drm/i915: Drop __rcu from gem_context->vm")
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119173321.2825472-1-robdclark@gmail.com
(cherry picked from commit 99343c46d4e2b34c285d3d5f68ff04274c2f9fb4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler

commit 3f6c02fa712bd453871877fe1d1969625617471e upstream.

Requesting an interrupt with IRQF_ONESHOT will run the primary handler
in the hard-IRQ context even in the force-threaded mode. The
force-threaded mode is used by PREEMPT_RT in order to avoid acquiring
sleeping locks (spinlock_t) in hard-IRQ context. This combination
makes it impossible and leads to "sleeping while atomic" warnings.

Use one interrupt handler for both handlers (primary and secondary)
and drop the IRQF_ONESHOT flag which is not needed.

Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Valentin Caron <valentin.caron@foss.st.com> # V3
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230120160332.57930-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: actually set signaling bit for private stub fences

commit d2ceea0eb6e17bb37d8b85cb4c16797c0d683d1c upstream.

In dma_fence_allocate_private_stub() set the signaling bit of the newly
allocated private stub fence rather than the signaling bit of the
shared dma_fence_stub.

Cc: <stable@vger.kernel.org> # v6.1
Fixes: c85d00d4fd8b ("dma-buf: set signaling bit for the stub fence")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126002844.339593-1-dakr@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

migrate: hugetlb: check for hugetlb shared PMD in node migration

commit 73bdf65ea74857d7fb2ec3067a3cec0e261b1462 upstream.

migrate_pages/mempolicy semantics state that CAP_SYS_NICE is required to
move pages shared with another process to a different node.  page_mapcount
> 1 is being used to determine if a hugetlb page is shared.  However, a
hugetlb page will have a mapcount of 1 if mapped by multiple processes via
a shared PMD.  As a result, hugetlb pages shared by multiple processes and
mapped with a shared PMD can be moved by a process without CAP_SYS_NICE.

To fix, check for a shared PMD if mapcount is 1.  If a shared PMD is found
consider the page shared.

Link: https://lkml.kernel.org/r/20230126222721.222195-3-mike.kravetz@oracle.com
Fixes: e2d8cf405525 ("migrate: add hugepage migration code to migrate_pages()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix mas_empty_area_rev() lower bound validation

commit 7327e8111adb315423035fb5233533016dfd3f2e upstream.

mas_empty_area_rev() was not correctly validating the start of a gap
against the lower limit.  This could lead to the range starting lower than
the requested minimum.

Fix the issue by better validating a gap once one is found.

This commit also adds tests to the maple tree test suite for this issue
and tests the mas_empty_area() function for similar bound checking.

Link: https://lkml.kernel.org/r/20230111200136.1851322-1-Liam.Howlett@oracle.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216911
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: <amanieu@gmail.com>
Link: https://lore.kernel.org/linux-mm/0b9f5425-08d4-8013-aa4c-e620c3b10bb2@leemhuis.info/
Tested-by: Holger Hoffsttte <holger@applied-asynchrony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Squashfs: fix handling and sanity checking of xattr_ids count

commit f65c4bbbd682b0877b669828b4e033b8d5d0a2dc upstream.

A Sysbot [1] corrupted filesystem exposes two flaws in the handling and
sanity checking of the xattr_ids count in the filesystem.  Both of these
flaws cause computation overflow due to incorrect typing.

In the corrupted filesystem the xattr_ids value is 4294967071, which
stored in a signed variable becomes the negative number -225.

Flaw 1 (64-bit systems only):

The signed integer xattr_ids variable causes sign extension.

This causes variable overflow in the SQUASHFS_XATTR_*(A) macros.  The
variable is first multiplied by sizeof(struct squashfs_xattr_id) where the
type of the sizeof operator is "unsigned long".

On a 64-bit system this is 64-bits in size, and causes the negative number
to be sign extended and widened to 64-bits and then become unsigned.  This
produces the very large number 18446744073709548016 or 2^64 - 3600.  This
number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and
divided by SQUASHFS_METADATA_SIZE overflows and produces a length of 0
(stored in len).

Flaw 2 (32-bit systems only):

On a 32-bit system the integer variable is not widened by the unsigned
long type of the sizeof operator (32-bits), and the signedness of the
variable has no effect due it always being treated as unsigned.

The above corrupted xattr_ids value of 4294967071, when multiplied
overflows and produces the number 4294963696 or 2^32 - 3400.  This number
when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by
SQUASHFS_METADATA_SIZE overflows again and produces a length of 0.

The effect of the 0 length computation:

In conjunction with the corrupted xattr_ids field, the filesystem also has
a corrupted xattr_table_start value, where it matches the end of
filesystem value of 850.

This causes the following sanity check code to fail because the
incorrectly computed len of 0 matches the incorrect size of the table
reported by the superblock (0 bytes).

    len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids);
    indexes = SQUASHFS_XATTR_BLOCKS(*xattr_ids);

    /*
     * The computed size of the index table (len bytes) should exactly
     * match the table start and end points
    */
    start = table_start + sizeof(*id_table);
    end = msblk->bytes_used;

    if (len != (end - start))
            return ERR_PTR(-EINVAL);

Changing the xattr_ids variable to be "usigned int" fixes the flaw on a
64-bit system.  This relies on the fact the computation is widened by the
unsigned long type of the sizeof operator.

Casting the variable to u64 in the above macro fixes this flaw on a 32-bit
system.

It also means 64-bit systems do not implicitly rely on the type of the
sizeof operator to widen the computation.

[1] https://lore.kernel.org/lkml/000000000000cd44f005f1a0f17f@google.com/

Link: https://lkml.kernel.org/r/20230127061842.10965-1-phillip@squashfs.org.uk
Fixes: 506220d2ba21 ("squashfs: add more sanity checks in xattr id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: <syzbot+082fa4af80a5bb1a9843@syzkaller.appspotmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ia64: fix build error due to switch case label appearing next to declaration

commit 6f28a2613497fc587e347afa99fa2c52230678a7 upstream.

Since commit aa06a9bd8533 ("ia64: fix clock_getres(CLOCK_MONOTONIC) to
report ITC frequency"), gcc 10.1.0 fails to build ia64 with the gnomic:
| ../arch/ia64/kernel/sys_ia64.c: In function 'ia64_clock_getres':
| ../arch/ia64/kernel/sys_ia64.c:189:3: error: a label can only be part of a statement and a declaration is not a statement
|   189 |   s64 tick_ns = DIV_ROUND_UP(NSEC_PER_SEC, local_cpu_data->itc_freq);

This line appears immediately after a case label in a switch.

Move the declarations out of the case, to the top of the function.

Link: https://lkml.kernel.org/r/20230117151632.393836-1-james.morse@arm.com
Fixes: aa06a9bd8533 ("ia64: fix clock_getres(CLOCK_MONOTONIC) to report ITC frequency")
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Sergei Trofimovich <slyich@gmail.com>
Cc: Émeric Maschino <emeric.maschino@gmail.com>
Cc: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>