Florian Westphal [Thu, 28 Apr 2022 07:39:21 +0000 (09:39 +0200)]
netfilter: nft_socket: only do sk lookups when indev is available
commit
743b83f15d4069ea57c3e40996bf4a1077e0cdc1 upstream.
Check if the incoming interface is available and NFT_BREAK
in case neither skb->sk nor input device are set.
Because nf_sk_lookup_slow*() assume packet headers are in the
'in' direction, use in postrouting is not going to yield a meaningful
result. Same is true for the forward chain, so restrict the use
to prerouting, input and output.
Use in output work if a socket is already attached to the skb.
Fixes:
554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching")
Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Starke [Thu, 14 Apr 2022 09:42:12 +0000 (02:42 -0700)]
tty: n_gsm: fix malformed counter for out of frame data
commit
a24b4b2f660b7ddf3f484b37600bba382cb28a9d upstream.
The gsm_mux field 'malformed' represents the number of malformed frames
received. However, gsm1_receive() also increases this counter for any out
of frame byte.
Fix this by ignoring out of frame data for the malformed counter.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Starke [Thu, 14 Apr 2022 09:42:10 +0000 (02:42 -0700)]
tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2
commit
06d5afd4d640eea67f5623e76cd5fc03359b7f3c upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in
convergence layer type 2 can be either one or two bytes. The length is
encoded in the EA bit. This is set 1 for the last byte in the sequence.
gsmtty_modem_update() handles this correctly but gsm_dlci_data_output()
fails to set EA to 1. There is no case in which we encode two signal octets
as there is no case in which we send out a break signal.
Therefore, always set the EA bit to 1 for the signal octet to fix this.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Starke [Thu, 14 Apr 2022 09:42:09 +0000 (02:42 -0700)]
tty: n_gsm: fix mux cleanup after unregister tty device
commit
284260f278b706364fb4c88a7b56ba5298d5973c upstream.
Internally, we manage the alive state of the mux channels and mux itself
with the field member 'dead'. This makes it possible to notify the user
if the accessed underlying link is already gone. On the other hand,
however, removing the virtual ttys before terminating the channels may
result in peer messages being received without any internal target. Move
the mux cleanup procedure from gsmld_detach_gsm() to gsmld_close() to fix
this by keeping the virtual ttys open until the mux has been cleaned up.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Starke [Thu, 14 Apr 2022 09:42:08 +0000 (02:42 -0700)]
tty: n_gsm: fix decoupled mux resource
commit
1ec92e9742774bf42614fceea3bf6b50c9409225 upstream.
The active mux instances are managed in the gsm_mux array and via mux_get()
and mux_put() functions separately. This gives a very loose coupling
between the actual instance and the gsm_mux array which manages it. It also
results in unnecessary lockings which makes it prone to failures. And it
creates a race condition if more than the maximum number of mux instances
are requested while the user changes the parameters of an active instance.
The user may loose ownership of the current mux instance in this case.
Fix this by moving the gsm_mux array handling to the mux allocation and
deallocation functions.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Starke [Thu, 14 Apr 2022 09:42:07 +0000 (02:42 -0700)]
tty: n_gsm: fix restart handling via CLD command
commit
aa371e96f05dcb36a88298f5cb70aa7234d5e8b8 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.8.2 states that both sides will revert to
the non-multiplexed mode via a close-down message (CLD). The usual program
flow is as following:
- start multiplex mode by sending AT+CMUX to the mobile
- establish the control channel (DLCI 0)
- establish user channels (DLCI >0)
- terminate user channels
- send close-down message (CLD)
- revert to AT protocol (i.e. leave multiplexed mode)
The AT protocol is out of scope of the n_gsm driver. However,
gsm_disconnect() sends CLD if gsm_config() detects that the requested
parameters require the mux protocol to restart. The next immediate action
is to start the mux protocol by opening DLCI 0 again. Any responder side
which handles CLD commands correctly forces us to fail at this point
because AT+CMUX needs to be sent to the mobile to start the mux again.
Therefore, remove the CLD command in this phase and keep both sides in
multiplexed mode.
Remove the gsm_disconnect() function as it become unnecessary and merge the
remaining parts into gsm_cleanup_mux() to handle the termination order and
locking correctly.
Fixes:
71e077915396 ("tty: n_gsm: do not send/receive in ldisc close path")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namhyung Kim [Sat, 16 Apr 2022 00:40:47 +0000 (17:40 -0700)]
perf symbol: Update symbols__fixup_end()
commit
8799ebce84d672aae1dc3170510f6a3e66f96b11 upstream.
Now arch-specific functions all do the same thing. When it fixes the
symbol address it needs to check the boundary between the kernel image
and modules. For the last symbol in the previous region, it cannot
know the exact size as it's discarded already. Thus it just uses a
small page size (4096) and rounds it up like the last symbol.
Fixes:
3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namhyung Kim [Sat, 16 Apr 2022 00:40:46 +0000 (17:40 -0700)]
perf symbol: Pass is_kallsyms to symbols__fixup_end()
commit
838425f2defe5262906b698752d28fd2fca1aac2 upstream.
The symbol fixup is necessary for symbols in kallsyms since they don't
have size info. So we use the next symbol's address to calculate the
size. Now it's also used for user binaries because sometimes they miss
size for hand-written asm functions.
There's a arch-specific function to handle kallsyms differently but
currently it cannot distinguish kallsyms from others. Pass this
information explicitly to handle it properly. Note that those arch
functions will be moved to the generic function so I didn't added it to
the arch-functions.
Fixes:
3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov [Tue, 19 Apr 2022 16:52:41 +0000 (09:52 -0700)]
x86/cpu: Load microcode during restore_processor_state()
commit
f9e14dbbd454581061c736bf70bf5cbb15ac927c upstream.
When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:
...
PM: Calling lapic_suspend+0x0/0x210
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
Call Trace:
<TASK>
? restore_processor_state
x86_acpi_suspend_lowlevel
acpi_suspend_enter
suspend_devices_and_enter
pm_suspend.cold
state_store
kobj_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
__x64_sys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
RIP: 0033:0x7fda13c260a7
To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.
[ Pawan: write commit message and productize it. ]
Fixes:
e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Harvey [Tue, 5 Apr 2022 19:35:09 +0000 (12:35 -0700)]
ARM: dts: imx8mm-venice-gw{71xx,72xx,73xx}: fix OTG controller OC mode
commit
4c79865f3e8a2db93ec1e844509edfebe5a6ae56 upstream.
The GW71xx, GW72xx and GW73xx boards have USB1 routed to a USB OTG
connectors and USB2 routed to a USB hub.
The OTG connector has a over-currently protection with an active-low
pin and the USB1 to HUB connection has no over-current protection (as
the HUB itself implements this for its downstream ports).
Add proper dt nodes to specify the over-current pin polarity for USB1
and disable over-current protection for USB2.
Fixes:
6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Cc: stable@vger.kernel.org
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eugen Hristev [Mon, 7 Mar 2022 11:38:27 +0000 (13:38 +0200)]
ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
commit
3f7ce6d7091765ed6c67c5d78aa364b9d17e3aab upstream.
Flexcom3 is used as board console serial. There are no pull-ups on these
lines on the board. This means that if a cable is not connected (that has
pull-ups included), stray characters could appear on the console as the
floating pins voltage levels are interpreted as incoming characters.
To avoid this problem, enable the internal pull-ups on these lines.
Fixes:
7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220307113827.2419331-1-eugen.hristev@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Wed, 6 Apr 2022 16:07:54 +0000 (17:07 +0100)]
btrfs: fix leaked plug after failure syncing log on zoned filesystems
commit
50ff57888d0b13440e7f4cde05dc339ee8d0f1f8 upstream.
On a zoned filesystem, if we fail to allocate the root node for the log
root tree while syncing the log, we end up returning without finishing
the IO plug we started before, resulting in leaking resources as we
have started writeback for extent buffers of a log tree before. That
allocation failure, which typically is either -ENOMEM or -ENOSPC, is not
fatal and the fsync can safely fallback to a full transaction commit.
So release the IO plug if we fail to allocate the extent buffer for the
root of the log root tree when syncing the log on a zoned filesystem.
Fixes:
3ddebf27fcd3a9 ("btrfs: zoned: reorder log node allocation on zoned filesystem")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Thu, 21 Apr 2022 16:55:04 +0000 (09:55 -0700)]
thermal: int340x: Fix attr.show callback prototype
commit
d0f6cfb2bd165b0aa307750e07e03420859bd554 upstream.
Control Flow Integrity (CFI) instrumentation of the kernel noticed that
the caller, dev_attr_show(), and the callback, odvp_show(), did not have
matching function prototypes, which would cause a CFI exception to be
raised. Correct the prototype by using struct device_attribute instead
of struct kobj_attribute.
Reported-and-tested-by: Joao Moreira <joao@overdrivepizza.com>
Link: https://lore.kernel.org/lkml/067ce8bd4c3968054509831fa2347f4f@overdrivepizza.com/
Fixes:
006f006f1e5c ("thermal/int340x_thermal: Export OEM vendor variables")
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Thu, 21 Apr 2022 13:36:34 +0000 (16:36 +0300)]
ACPI: processor: idle: Avoid falling back to C3 type C-states
commit
fc45e55ebc58dbf622cb89ddbf797589c7a5510b upstream.
The "safe state" index is used by acpi_idle_enter_bm() to avoid
entering a C-state that may require bus mastering to be disabled
on entry in the cases when this is not going to happen. For this
reason, it should not be set to point to C3 type of C-states, because
they may require bus mastering to be disabled on entry in principle.
This was broken by commit
d6b88ce2eb9d ("ACPI: processor idle: Allow
playing dead in C3 state") which inadvertently allowed the "safe
state" index to point to C3 type of C-states.
This results in a machine that won't boot past the point when it first
enters C3. Restore the correct behaviour (either demote to C1/C2, or
use C3 but also set ARB_DIS=1).
I hit this on a Fujitsu Siemens Lifebook S6010 (P3) machine.
Fixes:
d6b88ce2eb9d ("ACPI: processor idle: Allow playing dead in C3 state")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Woody Suwalski <wsuwalski@gmail.com>
[ rjw: Subject and changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dinh Nguyen [Wed, 20 Apr 2022 15:23:45 +0000 (10:23 -0500)]
net: ethernet: stmmac: fix write to sgmii_adapter_base
commit
5fd1fe4807f91ea0cca043114d929faa11bd4190 upstream.
I made a mistake with the commit
a6aaa0032424 ("net: ethernet: stmmac:
fix altr_tse_pcs function when using a fixed-link"). I should have
tested against both scenario of having a SGMII interface and one
without.
Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is
NULL, thus a write to this address will fail.
Cc: stable@vger.kernel.org
Fixes:
a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Thu, 21 Apr 2022 16:22:21 +0000 (19:22 +0300)]
drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses
commit
4ae4dd2e26fdfebf0b8c6af6c325383eadfefdb4 upstream.
Fix typo in the _SEL_FETCH_PLANE_BASE_1_B register base address.
Fixes:
a5523e2ff074a5 ("drm/i915: Add PSR2 selective fetch registers")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/5400
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220421162221.2261895-1-imre.deak@intel.com
(cherry picked from commit
af2cbc6ef967f61711a3c40fca5366ea0bc7fecc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jouni Högander [Wed, 13 Apr 2022 08:28:26 +0000 (11:28 +0300)]
drm/i915: Check EDID for HDR static metadata when choosing blc
commit
c05d8332f5d23fa3b521911cbe55a2b67fb21248 upstream.
We have now seen panel (XMG Core 15 e21 laptop) advertizing support
for Intel proprietary eDP backlight control via DPCD registers, but
actually working only with legacy pwm control.
This patch adds panel EDID check for possible HDR static metadata and
Intel proprietary eDP backlight control is used only if that exists.
Missing HDR static metadata is ignored if user specifically asks for
Intel proprietary eDP backlight control via enable_dpcd_backlight
parameter.
v2 :
- Ignore missing HDR static metadata if Intel proprietary eDP
backlight control is forced via i915.enable_dpcd_backlight
- Printout info message if panel is missing HDR static metadata and
support for Intel proprietary eDP backlight control is detected
Fixes:
4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Filippo Falezza <filippo.falezza@outlook.it>
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413082826.120634-1-jouni.hogander@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
(cherry picked from commit
b4b157577cb1de13bee8bebc3576f1de6799a921)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Willi [Tue, 19 Apr 2022 13:47:00 +0000 (15:47 +0200)]
netfilter: Update ip6_route_me_harder to consider L3 domain
commit
8ddffdb9442a9d60b4a6e679ac48d7d21403a674 upstream.
The commit referenced below fixed packet re-routing if Netfilter mangles
a routing key property of a packet and the packet is routed in a VRF L3
domain. The fix, however, addressed IPv4 re-routing, only.
This commit applies the same behavior for IPv6. While at it, untangle
the nested ternary operator to make the code more readable.
Fixes:
6d8b49c3a3a3 ("netfilter: Update ip_route_me_harder to consider L3 domain")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Willi <martin@strongswan.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Md Sadre Alam [Mon, 18 Apr 2022 07:48:27 +0000 (13:18 +0530)]
mtd: rawnand: qcom: fix memory corruption that causes panic
commit
ba7542eb2dd5dfc75c457198b88986642e602065 upstream.
This patch fixes a memory corruption that occurred in the
nand_scan() path for Hynix nand device.
On boot, for Hynix nand device will panic at a weird place:
| Unable to handle kernel NULL pointer dereference at virtual
address
00000070
| [
00000070] *pgd=
00000000
| Internal error: Oops: 5 [#1] PREEMPT SMP ARM
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0
#38
| Hardware name: Generic DT based system
| PC is at nandc_set_reg+0x8/0x1c
| LR is at qcom_nandc_command+0x20c/0x5d0
| pc : [<
c088b74c>] lr : [<
c088d9c8>] psr:
00000113
| sp :
c14adc50 ip :
c14ee208 fp :
c0cc970c
| r10:
000000a3 r9 :
00000000 r8 :
00000040
| r7 :
c16f6a00 r6 :
00000090 r5 :
00000004 r4 :
c14ee040
| r3 :
00000000 r2 :
0000000b r1 :
00000000 r0 :
c14ee040
| Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
| Control:
10c5387d Table:
8020406a DAC:
00000051
| Register r0 information: slab kmalloc-2k start
c14ee000 pointer offset
64 size 2048
| Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
| nandc_set_reg from qcom_nandc_command+0x20c/0x5d0
| qcom_nandc_command from nand_readid_op+0x198/0x1e8
| nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78
| hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454
| hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8
| nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0
| qcom_nandc_probe from platform_probe+0x58/0xac
The problem is that the nand_scan()'s qcom_nand_attach_chip callback
is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size.
This causes the sg_init_table of clear_bam_transaction() in the driver's
qcom_nandc_command() to memset much more than what was initially
allocated by alloc_bam_transaction().
This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page
size in qcom_nand_attach_chip call back after freeing the previously
allocated memory for bam txn as per nandc->max_cwperpage = 1 and then
again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on
page size in qcom_nand_attach_chip call back itself.
Cc: stable@vger.kernel.org
Fixes:
6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()")
Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1650268107-5363-1-git-send-email-quic_mdalam@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zqiang [Wed, 27 Apr 2022 19:41:56 +0000 (12:41 -0700)]
kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time
commit
31fa985b4196f8a66f027672e9bf2b81fea0417c upstream.
kasan_quarantine_remove_cache() is called in kmem_cache_shrink()/
destroy(). The kasan_quarantine_remove_cache() call is protected by
cpuslock in kmem_cache_destroy() to ensure serialization with
kasan_cpu_offline().
However the kasan_quarantine_remove_cache() call is not protected by
cpuslock in kmem_cache_shrink(). When a CPU is going offline and cache
shrink occurs at same time, the cpu_quarantine may be corrupted by
interrupt (per_cpu_remove_cache operation).
So add a cpu_quarantine offline flags check in per_cpu_remove_cache().
[akpm@linux-foundation.org: add comment, per Zqiang]
Link: https://lkml.kernel.org/r/20220414025925.2423818-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Tue, 12 Apr 2022 11:52:35 +0000 (20:52 +0900)]
zonefs: Clear inode information flags on inode creation
commit
694852ead287a3433126e7ebda397b242dc99624 upstream.
Ensure that the i_flags field of struct zonefs_inode_info is cleared to
0 when initializing a zone file inode, avoiding seeing the flag
ZONEFS_ZONE_OPEN being incorrectly set.
Fixes:
b5c00e975779 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Damien Le Moal [Tue, 12 Apr 2022 08:41:37 +0000 (17:41 +0900)]
zonefs: Fix management of open zones
commit
1da18a296f5ba4f99429e62a7cf4fdbefa598902 upstream.
The mount option "explicit_open" manages the device open zone
resources to ensure that if an application opens a sequential file for
writing, the file zone can always be written by explicitly opening
the zone and accounting for that state with the s_open_zones counter.
However, if some zones are already open when mounting, the device open
zone resource usage status will be larger than the initial s_open_zones
value of 0. Ensure that this inconsistency does not happen by closing
any sequential zone that is open when mounting.
Furthermore, with ZNS drives, closing an explicitly open zone that has
not been written will change the zone state to "closed", that is, the
zone will remain in an active state. Since this can then cause failures
of explicit open operations on other zones if the drive active zone
resources are exceeded, we need to make sure that the zone is not
active anymore by resetting it instead of closing it. To address this,
zonefs_zone_mgmt() is modified to change a REQ_OP_ZONE_CLOSE request
into a REQ_OP_ZONE_RESET for sequential zones that have not been
written.
Fixes:
b5c00e975779 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Wed, 20 Apr 2022 13:44:17 +0000 (16:44 +0300)]
Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"
commit
20e582e16af24b074e583f9551fad557882a3c9d upstream.
This reverts commit
bfe55a1f7fd6bfede16078bf04c6250fbca11588.
This was presumably misdiagnosed as an inability to use C3 at
all when I suspect the real problem is just misconfiguration of
C3 vs. ARB_DIS.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Tested-by: Woody Suwalski <wsuwalski@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sidhartha Kumar [Thu, 21 Apr 2022 23:35:52 +0000 (16:35 -0700)]
selftest/vm: verify remap destination address in mremap_test
[ Upstream commit
18d609daa546c919fd36b62a7b510c18de4b4af8 ]
Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy
existing mappings. This causes a segfault when regions such as text are
remapped and the permissions are changed.
Verify the requested mremap destination address does not overlap any
existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep
incrementing the destination address until a valid mapping is found or
fail the current test once the max address is reached.
Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sidhartha Kumar [Thu, 21 Apr 2022 23:35:49 +0000 (16:35 -0700)]
selftest/vm: verify mmap addr in mremap_test
[ Upstream commit
9c85a9bae267f6b5e5e374d0d023bbbe9db096d3 ]
Avoid calling mmap with requested addresses that are less than the
system's mmap_min_addr. When run as root, mmap returns EACCES when
trying to map addresses < mmap_min_addr. This is not one of the error
codes for the condition to retry the mmap in the test.
Rather than arbitrarily retrying on EACCES, don't attempt an mmap until
addr > vm.mmap_min_addr.
Add a munmap call after an alignment check as the mappings are retained
after the retry and can reach the vm.max_map_count sysctl.
Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Kardashevskiy [Thu, 21 Apr 2022 02:57:56 +0000 (12:57 +1000)]
powerpc/perf: Fix 32bit compile
[ Upstream commit
bb82c574691daf8f7fa9a160264d15c5804cb769 ]
The "read_bhrb" global symbol is only called under CONFIG_PPC64 of
arch/powerpc/perf/core-book3s.c but it is compiled for both 32 and 64 bit
anyway (and LLVM fails to link this on 32bit).
This fixes it by moving bhrb.o to obj64 targets.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220421025756.571995-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Duoming Zhou [Sun, 17 Apr 2022 12:55:19 +0000 (20:55 +0800)]
drivers: net: hippi: Fix deadlock in rr_close()
[ Upstream commit
bc6de2878429e85c1f1afaa566f7b5abb2243eef ]
There is a deadlock in rr_close(), which is shown below:
(Thread 1) | (Thread 2)
| rr_open()
rr_close() | add_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rr_timer()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ronnie Sahlberg [Thu, 21 Apr 2022 01:15:36 +0000 (11:15 +1000)]
cifs: destage any unwritten data to the server before calling copychunk_write
[ Upstream commit
f5d0f921ea362636e4a2efb7c38d1ead373a8700 ]
because the copychunk_write might cover a region of the file that has not yet
been sent to the server and thus fail.
A simple way to reproduce this is:
truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile
the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with
the 'fcollapse 16k 24k' due to write-back caching.
fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call
and it will fail serverside since the file is still 0b in size serverside
until the writes have been destaged.
To avoid this we must ensure that we destage any unwritten data to the
server before calling COPYCHUNK_WRITE.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mikulas Patocka [Tue, 19 Apr 2022 13:56:23 +0000 (09:56 -0400)]
x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
[ Upstream commit
a6823e4e360fe975bd3da4ab156df7c74c8b07f3 ]
The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment. However,
this condition may misbehave if "size" is greater than 4GiB.
The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one. However, the
cast truncates high bits in "size" and it results in misbehavior.
For example:
suppose that size == 0x100000001, dest == 0x200000002
min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
...
dest += 0x1;
so we copy just one byte "and" dest remains unaligned.
This patch fixes the bug by replacing unsigned with size_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
suresh kumar [Sat, 16 Apr 2022 11:14:10 +0000 (16:44 +0530)]
bonding: do not discard lowest hash bit for non layer3+4 hashing
[ Upstream commit
49aefd131739df552f83c566d0665744c30b1d70 ]
Commit
b5f862180d70 was introduced to discard lowest hash bit for layer3+4 hashing
but it also removes last bit from non layer3+4 hashing
Below script shows layer2+3 hashing will result in same slave to be used with above commit.
$ cat hash.py
#/usr/bin/python3.6
h_dests=[0xa0, 0xa1]
h_source=0xe3
hproto=0x8
saddr=0x1e7aa8c0
daddr=0x17aa8c0
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
hash ^= hash >> 16
hash ^= hash >> 8
print(hash)
print("with last bit removed")
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
hash ^= hash >> 16
hash ^= hash >> 8
hash = hash >> 1
print(hash)
Output:
$ python3.6 hash.py
522133332
522133333 <-------------- will result in both slaves being used
with last bit removed
261066666
261066666 <-------------- only single slave used
Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namjae Jeon [Wed, 13 Apr 2022 01:01:36 +0000 (10:01 +0900)]
ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION
[ Upstream commit
02655a70b7cc0f534531ee65fa72692f4d31a944 ]
Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size.
If fat/exfat is a local share, ->f_bsize is a cluster size that is too
large to be used as a sector size. Sector sizes larger than 4K cause
problem occurs when mounting an iso file through windows client.
The error message can be obtained using Mount-DiskImage command,
the error is:
"Mount-DiskImage : The sector size of the physical disk on which the
virtual disk resides is not supported."
This patch reports fixed 4KB sector size if ->s_blocksize is bigger
than 4KB.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namjae Jeon [Tue, 5 Apr 2022 03:04:43 +0000 (12:04 +0900)]
ksmbd: increment reference count of parent fp
[ Upstream commit
8510a043d334ecdf83d4604782f288db6bf21d60 ]
Add missing increment reference count of parent fp in
ksmbd_lookup_fd_inode().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Duoming Zhou [Thu, 7 Apr 2022 15:44:30 +0000 (23:44 +0800)]
arch: xtensa: platforms: Fix deadlock in rs_close()
[ Upstream commit
eb5adc70754d26a260f8b42d39db42da0d0af500 ]
There is a deadlock in rs_close(), which is shown
below:
(Thread 1) | (Thread 2)
| rs_open()
rs_close() | mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rs_poll()
del_timer_sync() | spin_lock() //(2)
(wait timer to stop) | ...
We hold timer_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need timer_lock in position (2) of thread 2.
As a result, rs_close() will block forever.
This patch deletes the redundant timer_lock in order to
prevent the deadlock. Because there is no race condition
between rs_close, rs_open and rs_poll.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Message-Id: <
20220407154430.22387-1-duoming@zju.edu.cn>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ye Bin [Tue, 22 Mar 2022 01:24:19 +0000 (09:24 +0800)]
ext4: fix bug_on in start_this_handle during umount filesystem
[ Upstream commit
b98535d091795a79336f520b0708457aacf55c67 ]
We got issue as follows:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:389!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197
Workqueue: events flush_stashed_error_work
RIP: 0010:start_this_handle+0x41c/0x1160
RSP: 0018:
ffff888106b47c20 EFLAGS:
00010202
RAX:
ffffed10251b8400 RBX:
ffff888128dc204c RCX:
ffffffffb52972ac
RDX:
0000000000000200 RSI:
0000000000000004 RDI:
ffff888128dc2050
RBP:
0000000000000039 R08:
0000000000000001 R09:
ffffed10251b840a
R10:
ffff888128dc204f R11:
ffffed10251b8409 R12:
ffff888116d78000
R13:
0000000000000000 R14:
dffffc0000000000 R15:
ffff888128dc2000
FS:
0000000000000000(0000) GS:
ffff88839d680000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000001620068 CR3:
0000000376c0e000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
jbd2__journal_start+0x38a/0x790
jbd2_journal_start+0x19/0x20
flush_stashed_error_work+0x110/0x2b3
process_one_work+0x688/0x1080
worker_thread+0x8b/0xc50
kthread+0x26f/0x310
ret_from_fork+0x22/0x30
</TASK>
Modules linked in:
---[ end trace
0000000000000000 ]---
Above issue may happen as follows:
umount read procfs error_work
ext4_put_super
flush_work(&sbi->s_error_work);
ext4_mb_seq_groups_show
ext4_mb_load_buddy_gfp
ext4_mb_init_group
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_validate_block_bitmap
ext4_error
ext4_handle_error
schedule_work(&EXT4_SB(sb)->s_error_work);
ext4_unregister_sysfs(sb);
jbd2_journal_destroy(sbi->s_journal);
journal_kill_thread
journal->j_flags |= JBD2_UNMOUNT;
flush_stashed_error_work
jbd2_journal_start
start_this_handle
BUG_ON(journal->j_flags & JBD2_UNMOUNT);
To solve this issue, we call 'ext4_unregister_sysfs() before flushing
s_error_work in ext4_put_super().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheyu Ma [Tue, 5 Apr 2022 12:10:38 +0000 (20:10 +0800)]
ASoC: wm8731: Disable the regulator when probing fails
[ Upstream commit
92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]
When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().
The following log reveals it:
[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 17.824467] Call Trace:
[ 17.824774] <TASK>
[ 17.825040] regulator_bulk_free+0x82/0xe0
[ 17.825514] devres_release_group+0x319/0x3d0
[ 17.825882] i2c_device_probe+0x766/0x940
[ 17.829198] i2c_register_driver+0xb5/0x130
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Song [Wed, 6 Apr 2022 19:23:41 +0000 (14:23 -0500)]
ASoC: Intel: soc-acpi: correct device endpoints for max98373
[ Upstream commit
97326be14df7bacc6ba5c62c0556298c27ea0432 ]
The left speaker of max98373 uses spk_r_endpoint, and right
speaker uses spk_l_endpoint, this is obviously wrong.
This patch corrects the endpoints for max98373 codec.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pengcheng Yang [Tue, 26 Apr 2022 10:03:39 +0000 (18:03 +0800)]
tcp: fix F-RTO may not work correctly when receiving DSACK
[ Upstream commit
d9157f6806d1499e173770df1f1b234763de5c79 ]
Currently DSACK is regarded as a dupack, which may cause
F-RTO to incorrectly enter "loss was real" when receiving
DSACK.
Packetdrill to demonstrate:
// Enable F-RTO and TLP
0 `sysctl -q net.ipv4.tcp_frto=2`
0 `sysctl -q net.ipv4.tcp_early_retrans=3`
0 `sysctl -q net.ipv4.tcp_congestion_control=cubic`
// Establish a connection
+0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// RTT 10ms, RTO 210ms
+.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <...>
+.01 < . 1:1(0) ack 1 win 257
+0 accept(3, ..., ...) = 4
// Send 2 data segments
+0 write(4, ..., 2000) = 2000
+0 > P. 1:2001(2000) ack 1
// TLP
+.022 > P. 1001:2001(1000) ack 1
// Continue to send 8 data segments
+0 write(4, ..., 10000) = 10000
+0 > P. 2001:10001(8000) ack 1
// RTO
+.188 > . 1:1001(1000) ack 1
// The original data is acked and new data is sent(F-RTO step 2.b)
+0 < . 1:1(0) ack 2001 win 257
+0 > P. 10001:12001(2000) ack 1
// D-SACK caused by TLP is regarded as a dupack, this results in
// the incorrect judgment of "loss was real"(F-RTO step 3.a)
+.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop>
// Never-retransmitted data(3001:4001) are acked and
// expect to switch to open state(F-RTO step 3.b)
+0 < . 1:1(0) ack 4001 win 257
+0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }%
Fixes:
e33099f96d99 ("tcp: implement RFC5682 F-RTO")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dany Madden [Wed, 27 Apr 2022 23:51:46 +0000 (18:51 -0500)]
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
[ Upstream commit
aeaf59b78712c7a1827c76f086acff4f586e072f ]
This reverts commit
723ad916134784b317b72f3f6cf0f7ba774e5dae
When client requests channel or ring size larger than what the server
can support the server will cap the request to the supported max. So,
the client would not be able to successfully request resources that
exceed the server limit.
Fixes:
723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Wed, 27 Apr 2022 17:31:52 +0000 (10:31 -0700)]
ixgbe: ensure IPsec VF<->PF compatibility
[ Upstream commit
f049efc7f7cd2f3c419f55040928eaefb13b3636 ]
The VF driver can forward any IPsec flags and such makes the function
is not extendable and prone to backward/forward incompatibility.
If new software runs on VF, it won't know that PF configured something
completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag.
Fixes:
eda0333ac293 ("ixgbe: add VF IPsec management")
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Timothy Hayes [Thu, 21 Apr 2022 16:52:03 +0000 (17:52 +0100)]
perf arm-spe: Fix addresses of synthesized SPE events
[ Upstream commit
4e13f6706d5aee1a6b835a44f6cf4971a921dcb8 ]
This patch corrects a bug whereby synthesized events from SPE
samples are missing virtual addresses.
Fixes:
54f7815efef7fad9 ("perf arm-spe: Fill address info for samples")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220421165205.117662-2-timothy.hayes@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Thu, 28 Apr 2022 12:51:33 +0000 (14:51 +0200)]
gfs2: No short reads or writes upon glock contention
[ Upstream commit
296abc0d91d8b65d42224dd33452ace14491ad08 ]
Commit
00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered
I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to
allow dropping the inode glock while faulting in user buffers. When the
lock was dropped, a short result was returned to indicate that the
operation was interrupted.
As pointed out by Linus (see the link below), this behavior is broken
and the operations should always re-acquire the inode glock and resume
the operation instead.
Link: https://lore.kernel.org/lkml/CAHk-=whaz-g_nOOoo8RRiWNjnv2R+h6_xk2F1J4TuSRxk1MtLw@mail.gmail.com/
Fixes:
00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered I/O")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Thu, 24 Mar 2022 22:13:26 +0000 (23:13 +0100)]
gfs2: Make sure not to return short direct writes
[ Upstream commit
3bde4c48586074202044456285a97ccdf9048988 ]
When direct writes fail with -ENOTBLK because we're writing into a
hole (gfs2_iomap_begin()) or because of a page invalidation failure
(iomap_dio_rw()), we're falling back to buffered writes. In that case,
when we lose the inode glock in gfs2_file_buffered_write(), we want to
re-acquire it instead of returning a short write.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Thu, 17 Mar 2022 13:20:38 +0000 (14:20 +0100)]
gfs2: Minor retry logic cleanup
[ Upstream commit
124c458a401a2497f796e4f2d6cafac6edbea8e9 ]
Clean up the retry logic in the read and write functions somewhat.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Tue, 9 Nov 2021 12:57:17 +0000 (13:57 +0100)]
gfs2: Prevent endless loops in gfs2_file_buffered_write
[ Upstream commit
554c577cee95bdc1d03d9f457e57dc96eb791845 ]
Currently, instead of performing a short write,
iomap_file_buffered_write will fail when part of its iov iterator cannot
be read. In contrast, gfs2_file_buffered_write will loop around if it
can read part of the iov iterator, so we can end up in an endless loop.
This should be fixed in iomap_file_buffered_write (and also
generic_perform_write), but this comes a bit late in the 5.16
development cycle, so work around it in the filesystem by
trimming the iov iterator to the known-good size for now.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 26 Apr 2022 12:52:31 +0000 (20:52 +0800)]
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
[ Upstream commit
d2b52ec056d5bddb055c8f21d7489a23548d0838 ]
Put device node in error path in fec_enet_init_stop_mode().
Fixes:
8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manish Chopra [Tue, 26 Apr 2022 15:39:13 +0000 (08:39 -0700)]
bnx2x: fix napi API usage sequence
[ Upstream commit
af68656d66eda219b7f55ce8313a1da0312c79e1 ]
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.
System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor:
168e14e4 [ 3222.583557] EEH: PCI cmd/status register:
00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00:
00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10:
10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20:
00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00:
13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10:
00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20:
00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30:
00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor:
168e14e4 [ 3222.584491] EEH: PCI cmd/status register:
00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00:
00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10:
10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20:
00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00:
13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10:
00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20:
00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30:
00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload
Uninterruptible tasks
=====================
crash> ps | grep UN
213 2 11
c000000004c89e00 UN 0.0 0 0 [eehd]
215 2 0
c000000004c80000 UN 0.0 0 0
[kworker/0:2]
2196 1 28
c000000004504f00 UN 0.1 15936 11136 wickedd
4287 1 9
c00000020d076800 UN 0.0 4032 3008 agetty
4289 1 20
c00000020d056680 UN 0.0 7232 3840 agetty
32423 2 26
c00000020038c580 UN 0.0 0 0
[kworker/26:3]
32871 4241 27
c0000002609ddd00 UN 0.1 18624 11648 sshd
32920 10130 16
c00000027284a100 UN 0.1 48512 12608 sendmail
33092 32987 0
c000000205218b00 UN 0.1 48512 12608 sendmail
33154 4567 16
c000000260e51780 UN 0.1 48832 12864 pickup
33209 4241 36
c000000270cb6500 UN 0.1 18624 11712 sshd
33473 33283 0
c000000205211480 UN 0.1 48512 12672 sendmail
33531 4241 37
c00000023c902780 UN 0.1 18624 11648 sshd
EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213 TASK:
c000000004c89e00 CPU: 11 COMMAND: "eehd"
#0 [
c000000004d477e0] __schedule at
c000000000c70808
#1 [
c000000004d478b0] schedule at
c000000000c70ee0
#2 [
c000000004d478e0] schedule_timeout at
c000000000c76dec
#3 [
c000000004d479c0] msleep at
c0000000002120cc
#4 [
c000000004d479f0] napi_disable at
c000000000a06448
^^^^^^^^^^^^^^^^
#5 [
c000000004d47a30] bnx2x_netif_stop at
c0080000018dba94 [bnx2x]
#6 [
c000000004d47a60] bnx2x_io_slot_reset at
c0080000018a551c [bnx2x]
#7 [
c000000004d47b20] eeh_report_reset at
c00000000004c9bc
#8 [
c000000004d47b90] eeh_pe_report at
c00000000004d1a8
#9 [
c000000004d47c40] eeh_handle_normal_event at
c00000000004da64
And the sleeping source code
============================
crash> dis -ls
c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702
6697 {
6698 might_sleep();
6699 set_bit(NAPI_STATE_DISABLE, &n->state);
6700
6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702 msleep(1);
6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
6704 msleep(1);
6705
6706 hrtimer_cancel(&n->timer);
6707
6708 clear_bit(NAPI_STATE_DISABLE, &n->state);
6709 }
EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:
bnx2x_io_error_detected()
+-> bnx2x_eeh_nic_unload()
+-> bnx2x_del_all_napi()
+-> __netif_napi_del()
bnx2x_io_slot_reset()
+-> bnx2x_netif_stop()
+-> bnx2x_napi_disable()
+->napi_disable()
Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.
Fixes:
7fa6f34081f1 ("bnx2x: AER revised")
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Mikityanskiy [Tue, 26 Apr 2022 15:49:49 +0000 (18:49 +0300)]
tls: Skip tls_append_frag on zero copy size
[ Upstream commit
a0df71948e9548de819a6f1da68f5f1742258a52 ]
Calling tls_append_frag when max_open_record_len == record->len might
add an empty fragment to the TLS record if the call happens to be on the
page boundary. Normally tls_append_frag coalesces the zero-sized
fragment to the previous one, but not if it's on page boundary.
If a resync happens then, the mlx5 driver posts dump WQEs in
tx_post_resync_dump, and the empty fragment may become a data segment
with byte_count == 0, which will confuse the NIC and lead to a CQE
error.
This commit fixes the described issue by skipping tls_append_frag on
zero size to avoid adding empty fragments. The fix is not in the driver,
because an empty fragment is hardly the desired behavior.
Fixes:
e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Thu, 21 Apr 2022 09:03:09 +0000 (17:03 +0800)]
drm/amd/display: Fix memory leak in dcn21_clock_source_create
[ Upstream commit
65e54987508b6f0771f56bdfa3ee1926d52785ae ]
When dcn20_clk_src_construct() fails, we need to release clk_src.
Fixes:
6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Yat Sin [Mon, 18 Apr 2022 15:55:58 +0000 (11:55 -0400)]
drm/amdkfd: Fix GWS queue count
[ Upstream commit
7c6b6e18c890f30965b0589b0a57645e1dbccfde ]
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.
Fixes:
b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue")
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Volodymyr Mytnyk [Wed, 27 Apr 2022 11:09:00 +0000 (14:09 +0300)]
netfilter: conntrack: fix udp offload timeout sysctl
[ Upstream commit
626873c446f7559d5af8b48cefad903ffd85cf4e ]
`nf_flowtable_udp_timeout` sysctl option is available only
if CONFIG_NFT_FLOW_OFFLOAD enabled. But infra for this flow
offload UDP timeout was added under CONFIG_NF_FLOW_TABLE
config option. So, if you have CONFIG_NFT_FLOW_OFFLOAD
disabled and CONFIG_NF_FLOW_TABLE enabled, the
`nf_flowtable_udp_timeout` is not present in sysfs.
Please note, that TCP flow offload timeout sysctl option
is present even CONFIG_NFT_FLOW_OFFLOAD is disabled.
I suppose it was a typo in commit that adds UDP flow offload
timeout and CONFIG_NF_FLOW_TABLE should be used instead.
Fixes:
975c57504da1 ("netfilter: conntrack: Introduce udp offload timeout configuration")
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jens Axboe [Wed, 27 Apr 2022 01:34:57 +0000 (19:34 -0600)]
io_uring: check reserved fields for recv/recvmsg
[ Upstream commit
5a1e99b61b0c81388cde0c808b3e4173907df19f ]
We should check unused fields for non-zero and -EINVAL if they are set,
making it consistent with other opcodes.
Fixes:
aa1fa28fc73e ("io_uring: add support for recvmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jens Axboe [Wed, 27 Apr 2022 01:34:11 +0000 (19:34 -0600)]
io_uring: check reserved fields for send/sendmsg
[ Upstream commit
588faa1ea5eecb351100ee5d187b9be99210f70d ]
We should check unused fields for non-zero and -EINVAL if they are set,
making it consistent with other opcodes.
Fixes:
0fa03c624d8f ("io_uring: add support for sendmsg()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Mon, 25 Apr 2022 15:20:27 +0000 (17:20 +0200)]
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
[ Upstream commit
71cffebf6358a7f5031f5b208bbdc1cb4db6e539 ]
Commit
4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.
Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).
At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.
Fixes:
4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
Tested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Samuel Holland [Sun, 24 Apr 2022 16:26:21 +0000 (11:26 -0500)]
drm/sun4i: Remove obsolete references to PHYS_OFFSET
[ Upstream commit
dc3ae06c5f2170d879ff58696f629d8c3868aec3 ]
commit
b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a
central place") added a platform device notifier that sets the DMA
offset for all of the display engine frontend and backend devices.
The code applying the offset to DMA buffer physical addresses was then
removed from the backend driver in commit
756668ba682e ("drm/sun4i:
backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET
was left in the frontend driver.
As a result, the offset was applied twice in the frontend driver. This
likely went unnoticed because it only affects specific configurations
(scaling or certain pixel formats) where the frontend is used, on boards
with both one of these older SoCs and more than 1 GB of DRAM.
In addition, the references to PHYS_OFFSET prevent compiling the driver
on architectures where PHYS_OFFSET is not defined.
Fixes:
b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-4-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Rossi [Mon, 25 Apr 2022 07:04:54 +0000 (07:04 +0000)]
net: dsa: mv88e6xxx: Fix port_hidden_wait to account for port_base_addr
[ Upstream commit
24cbdb910bb62b5be3865275e5682be1a7708c0f ]
The other port_hidden functions rely on the port_read/port_write
functions to access the hidden control port. These functions apply the
offset for port_base_addr where applicable. Update port_hidden_wait to
use the port_wait_bit so that port_base_addr offsets are accounted for
when waiting for the busy bit to change.
Without the offset the port_hidden_wait function would timeout on
devices that have a non-zero port_base_addr (e.g. MV88E6141), however
devices that have a zero port_base_addr would operate correctly (e.g.
MV88E6390).
Fixes:
609070133aff ("net: dsa: mv88e6xxx: update code operating on hidden registers")
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baruch Siach [Mon, 25 Apr 2022 06:27:38 +0000 (09:27 +0300)]
net: phy: marvell10g: fix return value on error
[ Upstream commit
0ed9704b660b259b54743cad8a84a11148f60f0a ]
Return back the error value that we get from phy_read_mmd().
Fixes:
c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1")
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Lemon [Sun, 24 Apr 2022 16:53:07 +0000 (09:53 -0700)]
net: bcmgenet: hide status block before TX timestamping
[ Upstream commit
acac0541d1d65e81e599ec399d34d184d2424401 ]
The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '
9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")'
However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.
Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.
As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes:
d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Zapolskiy [Thu, 7 Apr 2022 20:09:19 +0000 (23:09 +0300)]
cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
[ Upstream commit
e4e6448638a01905faeda9bf96aa9df7c8ef463c ]
It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.
Fixes:
275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 21 Apr 2022 13:43:08 +0000 (21:43 +0800)]
clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
[ Upstream commit
f58ca215cda1975f77b2b762903684a3c101bec9 ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Fixes:
7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 21 Apr 2022 14:35:49 +0000 (16:35 +0200)]
bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
[ Upstream commit
fff8c10368e64e7f8960f149375c12ca5f3b30af ]
This code is really spurious.
It always returns an ERR_PTR, even when err is known to be 0 and calls
put_device() after a successful device_register() call.
It is likely that the return statement in the normal path is missing.
Add 'return rdev;' to fix it.
Fixes:
d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Sun, 24 Apr 2022 20:35:09 +0000 (13:35 -0700)]
tcp: make sure treq->af_specific is initialized
[ Upstream commit
ba5a4fdd63ae0c575707030db0b634b160baddd7 ]
syzbot complained about a recent change in TCP stack,
hitting a NULL pointer [1]
tcp request sockets have an af_specific pointer, which
was used before the blamed change only for SYNACK generation
in non SYNCOOKIE mode.
tcp requests sockets momentarily created when third packet
coming from client in SYNCOOKIE mode were not using
treq->af_specific.
Make sure this field is populated, in the same way normal
TCP requests sockets do in tcp_conn_request().
[1]
TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters.
general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534
Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48
RSP: 0018:
ffffc90000de0588 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
ffff888076490330 RCX:
0000000000000100
RDX:
0000000000000001 RSI:
ffffffff87d67ff0 RDI:
0000000000000008
RBP:
ffff88806ee1c7f8 R08:
0000000000000000 R09:
0000000000000000
R10:
ffffffff87d67f00 R11:
0000000000000000 R12:
ffff88806ee1bfc0
R13:
ffff88801b0e0368 R14:
0000000000000000 R15:
0000000000000000
FS:
00007f517fe58700(0000) GS:
ffff8880b9d00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffcead76960 CR3:
000000006f97b000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<IRQ>
tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267
tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207
cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258
tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline]
tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486
tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725
ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422
ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473
dst_input include/net/dst.h:461 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297
__netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405
__netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519
process_backlog+0x3a0/0x7c0 net/core/dev.c:5847
__napi_poll+0xb3/0x6e0 net/core/dev.c:6413
napi_poll net/core/dev.c:6480 [inline]
net_rx_action+0x8ec/0xc60 net/core/dev.c:6567
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097
Fixes:
5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Mon, 25 Apr 2022 00:34:07 +0000 (17:34 -0700)]
tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
[ Upstream commit
4bfe744ff1644fbc0a991a2677dc874475dd6776 ]
I had this bug sitting for too long in my pile, it is time to fix it.
Thanks to Doug Porter for reminding me of it!
We had various attempts in the past, including commit
0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"),
but the issue is that TCP stack currently only generates
EPOLLOUT from input path, when tp->snd_una has advanced
and skb(s) cleaned from rtx queue.
If a flow has a big RTT, and/or receives SACKs, it is possible
that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0
and no more data can be sent until tp->snd_una finally advances.
What is needed is to also check if POLLOUT needs to be generated
whenever tp->snd_nxt is advanced, from output path.
This bug triggers more often after an idle period, as
we do not receive ACK for at least one RTT. tcp_notsent_lowat
could be a fraction of what CWND and pacing rate would allow to
send during this RTT.
In a followup patch, I will remove the bogus call
to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED)
from tcp_check_space(). Fact that we have decided to generate
an EPOLLOUT does not mean the application has immediately
refilled the transmit queue. This optimistic call
might have been the reason the bug seemed not too serious.
Tested:
200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2]
$ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat
$ cat bench_rr.sh
SUM=0
for i in {1..10}
do
V=`netperf -H remote_host -l30 -t TCP_RR -- -r
10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"`
echo $V
SUM=$(($SUM + $V))
done
echo SUM=$SUM
Before patch:
$ bench_rr.sh
130000000
80000000
140000000
140000000
140000000
140000000
130000000
40000000
90000000
110000000
SUM=
1140000000
After patch:
$ bench_rr.sh
430000000
590000000
530000000
450000000
450000000
350000000
450000000
490000000
480000000
460000000
SUM=
4680000000 # This is 410 % of the value before patch.
Fixes:
c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Doug Porter <dsp@fb.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peilin Ye [Thu, 21 Apr 2022 22:09:02 +0000 (15:09 -0700)]
ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode
[ Upstream commit
31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]
As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the
following sequence of events:
1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
add ... external". "ip" ignores "[o]seq" if "external" is specified,
so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:
gre_build_header(skb, tun_hlen,
flags, protocol,
tunnel_id_to_key32(tun_info->key.tun_id),
(flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
: 0); ^^^^^^^^^^^^^^^^^
Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by
making o_seqno atomic_t.
As mentioned by Eric Dumazet in commit
b790e01aee74 ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.
Maybe a better fix would be:
1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if
they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
with "oseq".
Unfortunately, that would break userspace.
We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes:
77a5196a804e ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peilin Ye [Thu, 21 Apr 2022 22:08:38 +0000 (15:08 -0700)]
ip6_gre: Make o_seqno start from 0 in native mode
[ Upstream commit
fde98ae91f79cab4e020f40c35ed23cbdc59661c ]
For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in
native mode. According to RFC 2890 2.2., "The first datagram is sent
with a sequence number of 0." Fix it.
It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(),
where tunnel->o_seqno is passed to gre_build_header() before getting
incremented.
Fixes:
c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peilin Ye [Thu, 21 Apr 2022 22:07:57 +0000 (15:07 -0700)]
ip_gre: Make o_seqno start from 0 in native mode
[ Upstream commit
ff827beb706ed719c766acf36449801ded0c17fc ]
For GRE and GRETAP devices, currently o_seqno starts from 1 in native
mode. According to RFC 2890 2.2., "The first datagram is sent with a
sequence number of 0." Fix it.
It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to
gre_build_header() before getting incremented.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
liuyacan [Thu, 21 Apr 2022 09:40:27 +0000 (17:40 +0800)]
net/smc: sync err code when tcp connection was refused
[ Upstream commit
4e2e65e2e56c6ceb4ea1719360080c0af083229e ]
In the current implementation, when TCP initiates a connection
to an unavailable [ip,port], ECONNREFUSED will be stored in the
TCP socket, but SMC will not. However, some apps (like curl) use
getsockopt(,,SO_ERROR,,) to get the error information, which makes
them miss the error message and behave strangely.
Fixes:
50717a37db03 ("net/smc: nonblocking connect rework")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jian Shen [Sun, 24 Apr 2022 12:57:25 +0000 (20:57 +0800)]
net: hns3: add return value for mailbox handling in PF
[ Upstream commit
c59d606296842409a6e5a4828235b0bd46b12bc4 ]
Currently, there are some querying mailboxes sent from VF to PF,
and VF will wait the PF's handling result. For mailbox
HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail
when the input parameter is invalid, but the prototype of their
handler function is void. In this case, PF always return success
to VF, which may cause the VF get incorrect result.
Fixes it by adding return value for these function.
Fixes:
63b1279d9905 ("net: hns3: check queue id range before using")
Fixes:
532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jian Shen [Sun, 24 Apr 2022 12:57:24 +0000 (20:57 +0800)]
net: hns3: add validity check for message data length
[ Upstream commit
7d413735cb18ff73aaba3457b16b08332e8d3cc4 ]
Add validity check for message data length in function
hclge_send_mbx_msg(), avoid unexpected overflow.
Fixes:
dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Wang [Sun, 24 Apr 2022 12:57:23 +0000 (20:57 +0800)]
net: hns3: modify the return code of hclge_get_ring_chain_from_mbx
[ Upstream commit
48009e9972974c52a5f649f761862dd67bce3d13 ]
Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if
ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to
return -EINVAL for the invalid parameter case.
So this patch fixes it by return -EINVAL in this abnormal branch.
Fixes:
5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jian Shen [Sun, 24 Apr 2022 12:57:20 +0000 (20:57 +0800)]
net: hns3: clear inited state and stop client after failed to register netdev
[ Upstream commit
e98365afc1e94ea1609268866a44112b3572c58b ]
If failed to register netdev, it needs to clear INITED state and stop
client in case of cause problem when concurrency with uninitialized
process of driver.
Fixes:
a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaobing Luo [Sat, 23 Apr 2022 15:12:04 +0000 (15:12 +0000)]
cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
[ Upstream commit
1aa24a8f3b5133dae4bc1e57427e345445f3e902 ]
--------------------------------------------
unreferenced object 0xffff000010742a00 (size 128):
comm "swapper/0", pid 1, jiffies
4294902015 (age 1187.652s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000b4dfebaa>] __kmalloc+0x338/0x474
[<
00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c
[<
000000007d6082a0>] platform_probe+0x98/0x11c
[<
00000000c990f549>] really_probe+0x234/0x5a0
[<
000000002d9fecc6>] __driver_probe_device+0x194/0x224
[<
00000000cf0b94fa>] driver_probe_device+0x64/0x13c
[<
00000000f238e4cf>] __device_attach_driver+0xf8/0x180
[<
000000006720e418>] bus_for_each_drv+0xf8/0x160
[<
00000000df4f14f6>] __device_attach+0x174/0x29c
[<
00000000782002fb>] device_initial_probe+0x20/0x30
[<
00000000c2681b06>] bus_probe_device+0xfc/0x110
[<
00000000964cf3bd>] device_add+0x5f0/0xcd0
[<
000000004b9264e3>] platform_device_add+0x198/0x390
[<
00000000fa82a9d0>] platform_device_register_full+0x178/0x210
[<
000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168
[<
000000000377cc7c>] do_one_initcall+0xe4/0x570
--------------------------------------------
if sun50i_cpufreq_get_efuse failed, then opp_tables leak.
Fixes:
f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Ruyi [Sun, 24 Apr 2022 03:14:30 +0000 (03:14 +0000)]
pinctrl: pistachio: fix use of irq_of_parse_and_map()
[ Upstream commit
0c9843a74a85224a89daa81fa66891dae2f930e1 ]
The irq_of_parse_and_map() function returns 0 on failure, and does not
return an negative value.
Fixes:
cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220424031430.3170759-1-lv.ruyi@zte.com.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Mon, 18 Apr 2022 17:47:31 +0000 (14:47 -0300)]
arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
[ Upstream commit
0310b5aa0656a94102344f1e9ae2892e342a665d ]
The ROHM BD71847 PMIC has a 32.768 kHz clock.
Describe the PMIC clock to fix the following boot errors:
bd718xx-clk bd71847-clk.1.auto: No parent clk found
bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22
Based on the same fix done for imx8mm-evk as per commit
a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")
Fixes:
3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Krummenacher [Thu, 14 Apr 2022 08:50:54 +0000 (10:50 +0200)]
ARM: dts: imx6ull-colibri: fix vqmmc regulator
[ Upstream commit
45974e4276a8d6653394f66666fc57d8ffa6de9a ]
The correct spelling for the property is gpios. Otherwise, the regulator
will neither reserve nor control any GPIOs. Thus, any SD/MMC card which
can use UHS-I modes will fail.
Fixes:
c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xin Long [Wed, 20 Apr 2022 20:52:41 +0000 (16:52 -0400)]
sctp: check asoc strreset_chunk in sctp_generate_reconf_event
[ Upstream commit
165e3e17fe8fe6a8aab319bc6e631a2e23b9a857 ]
A null pointer reference issue can be triggered when the response of a
stream reconf request arrives after the timer is triggered, such as:
send Incoming SSN Reset Request --->
CPU0:
reconf timer is triggered,
go to the handler code before hold sk lock
<--- reply with Outgoing SSN Reset Request
CPU1:
process Outgoing SSN Reset Request,
and set asoc->strreset_chunk to NULL
CPU0:
continue the handler code, hold sk lock,
and try to hold asoc->strreset_chunk, crash!
In Ying Xu's testing, the call trace is:
[ ] BUG: kernel NULL pointer dereference, address:
0000000000000010
[ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp]
[ ] Call Trace:
[ ] <IRQ>
[ ] sctp_sf_send_reconf+0x2c/0x100 [sctp]
[ ] sctp_do_sm+0xa4/0x220 [sctp]
[ ] sctp_generate_reconf_event+0xbd/0xe0 [sctp]
[ ] call_timer_fn+0x26/0x130
This patch is to fix it by returning from the timer handler if asoc
strreset_chunk is already set to NULL.
Fixes:
7b9438de0cd4 ("sctp: add stream reconf timer")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nikolay Aleksandrov [Thu, 21 Apr 2022 13:48:05 +0000 (15:48 +0200)]
wireguard: device: check for metadata_dst with skb_valid_dst()
[ Upstream commit
45ac774c33d834fe9d4de06ab5f1022fe8cd2071 ]
When we try to transmit an skb with md_dst attached through wireguard
we hit a null pointer dereference in wg_xmit() due to the use of
dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to
dereference dst->dev.
Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which
checks for DST_METADATA flag, and if it's set, then falls back to
wireguard's device mtu. That gives us the best chance of transmitting
the packet; otherwise if the blackhole netdev is used we'd get
ETH_MIN_MTU.
[ 263.693506] BUG: kernel NULL pointer dereference, address:
00000000000000e0
[ 263.693908] #PF: supervisor read access in kernel mode
[ 263.694174] #PF: error_code(0x0000) - not-present page
[ 263.694424] PGD 0 P4D 0
[ 263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522
[ 263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
[ 263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20
[ 263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00
[ 263.696339] RSP: 0018:
ffffa4a4422fbb28 EFLAGS:
00010246
[ 263.696600] RAX:
0000000000000000 RBX:
ffff8ac9c3553000 RCX:
0000000000000000
[ 263.696891] RDX:
0000000000000401 RSI:
00000000fffffe01 RDI:
ffffc4a43fb48900
[ 263.697178] RBP:
ffffa4a4422fbb90 R08:
ffffffff9622635e R09:
0000000000000002
[ 263.697469] R10:
ffffffff9b69a6c0 R11:
ffffa4a4422fbd0c R12:
ffff8ac9d18b1a00
[ 263.697766] R13:
ffff8ac9d0ce1840 R14:
ffff8ac9d18b1a00 R15:
ffff8ac9c3553000
[ 263.698054] FS:
00007f3704c337c0(0000) GS:
ffff8acaebf40000(0000) knlGS:
0000000000000000
[ 263.698470] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 263.698826] CR2:
00000000000000e0 CR3:
0000000117a5c000 CR4:
00000000000006e0
[ 263.699214] Call Trace:
[ 263.699505] <TASK>
[ 263.699759] wg_xmit+0x411/0x450
[ 263.700059] ? bpf_skb_set_tunnel_key+0x46/0x2d0
[ 263.700382] ? dev_queue_xmit_nit+0x31/0x2b0
[ 263.700719] dev_hard_start_xmit+0xd9/0x220
[ 263.701047] __dev_queue_xmit+0x8b9/0xd30
[ 263.701344] __bpf_redirect+0x1a4/0x380
[ 263.701664] __dev_queue_xmit+0x83b/0xd30
[ 263.701961] ? packet_parse_headers+0xb4/0xf0
[ 263.702275] packet_sendmsg+0x9a8/0x16a0
[ 263.702596] ? _raw_spin_unlock_irqrestore+0x23/0x40
[ 263.702933] sock_sendmsg+0x5e/0x60
[ 263.703239] __sys_sendto+0xf0/0x160
[ 263.703549] __x64_sys_sendto+0x20/0x30
[ 263.703853] do_syscall_64+0x3b/0x90
[ 263.704162] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 263.704494] RIP: 0033:0x7f3704d50506
[ 263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89
[ 263.705652] RSP: 002b:
00007ffe954b0b88 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
[ 263.706141] RAX:
ffffffffffffffda RBX:
0000558bb259b490 RCX:
00007f3704d50506
[ 263.706544] RDX:
000000000000004a RSI:
0000558bb259b7b2 RDI:
0000000000000003
[ 263.706952] RBP:
0000000000000000 R08:
00007ffe954b0b90 R09:
0000000000000014
[ 263.707339] R10:
0000000000000000 R11:
0000000000000246 R12:
00007ffe954b0b90
[ 263.707735] R13:
000000000000004a R14:
0000558bb259b7b2 R15:
0000000000000001
[ 263.708132] </TASK>
[ 263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge]
[ 263.708942] CR2:
00000000000000e0
Fixes:
e7096c131e51 ("net: WireGuard secure network tunnel")
Link: https://github.com/cilium/cilium/issues/19428
Reported-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pengcheng Yang [Wed, 20 Apr 2022 02:34:41 +0000 (10:34 +0800)]
tcp: ensure to use the most recently sent skb when filling the rate sample
[ Upstream commit
b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]
If an ACK (s)acks multiple skbs, we favor the information
from the most recently sent skb by choosing the skb with
the highest prior_delivered count. But in the interval
between receiving ACKs, we send multiple skbs with the same
prior_delivered, because the tp->delivered only changes
when we receive an ACK.
We used RACK's solution, copying tcp_rack_sent_after() as
tcp_skb_sent_after() helper to determine "which packet was
sent last?". Later, we will use tcp_skb_sent_after() instead
in RACK.
Fixes:
b9f64820fb22 ("tcp: track data delivery rate for a TCP connection")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Thu, 21 Apr 2022 14:08:27 +0000 (16:08 +0200)]
pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested
[ Upstream commit
05d8af449d93e04547b4c6b328e39c890bc803f4 ]
The current EOI handler for LEVEL triggered interrupts calls clk_enable(),
register IO, clk_disable(). The clock manipulation requires locking which
happens with IRQs disabled in clk_enable_lock(). Instead of turning the
clock on and off all the time, enable the clock in case LEVEL interrupt is
requested and keep the clock enabled until all LEVEL interrupts are freed.
The LEVEL interrupts are an exception on this platform and seldom used, so
this does not affect the common case.
This simplifies the LEVEL interrupt handling considerably and also fixes
the following splat found when using preempt-rt:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85
Hardware name: STM32 (Device Tree Support)
[<
c010a45d>] (unwind_backtrace) from [<
c010766f>] (show_stack+0xb/0xc)
[<
c010766f>] (show_stack) from [<
c06353ab>] (dump_stack+0x6f/0x84)
[<
c06353ab>] (dump_stack) from [<
c01145e3>] (__warn+0x7f/0xa4)
[<
c01145e3>] (__warn) from [<
c063386f>] (warn_slowpath_fmt+0x3b/0x74)
[<
c063386f>] (warn_slowpath_fmt) from [<
c063b43d>] (__rt_mutex_trylock+0x37/0x62)
[<
c063b43d>] (__rt_mutex_trylock) from [<
c063c053>] (rt_spin_trylock+0x7/0x16)
[<
c063c053>] (rt_spin_trylock) from [<
c036a2f3>] (clk_enable_lock+0xb/0x80)
[<
c036a2f3>] (clk_enable_lock) from [<
c036ba69>] (clk_core_enable_lock+0x9/0x18)
[<
c036ba69>] (clk_core_enable_lock) from [<
c034e9f3>] (stm32_gpio_get+0x11/0x24)
[<
c034e9f3>] (stm32_gpio_get) from [<
c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48)
[<
c034ef43>] (stm32_gpio_irq_trigger) from [<
c014aa53>] (handle_fasteoi_irq+0x71/0xa8)
[<
c014aa53>] (handle_fasteoi_irq) from [<
c0147111>] (generic_handle_irq+0x19/0x22)
[<
c0147111>] (generic_handle_irq) from [<
c014752d>] (__handle_domain_irq+0x55/0x64)
[<
c014752d>] (__handle_domain_irq) from [<
c0346f13>] (gic_handle_irq+0x53/0x64)
[<
c0346f13>] (gic_handle_irq) from [<
c0100ba5>] (__irq_svc+0x65/0xc0)
Exception stack(0xc0e01f18 to 0xc0e01f60)
1f00:
0000300c 00000000
1f20:
0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78
1f40:
c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff
[<
c0100ba5>] (__irq_svc) from [<
c0105542>] (arch_cpu_idle+0xc/0x1e)
[<
c0105542>] (arch_cpu_idle) from [<
c063be95>] (default_idle_call+0x21/0x3c)
[<
c063be95>] (default_idle_call) from [<
c01324f7>] (do_idle+0xe3/0x1e4)
[<
c01324f7>] (do_idle) from [<
c01327b3>] (cpu_startup_entry+0x13/0x14)
[<
c01327b3>] (cpu_startup_entry) from [<
c0a00c13>] (start_kernel+0x397/0x3d4)
[<
c0a00c13>] (start_kernel) from [<
00000000>] (0x0)
---[ end trace
0000000000000002 ]---
Power consumption measured on STM32MP157C DHCOM SoM is not increased or
is below noise threshold.
Fixes:
47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Francesco Ruggeri [Thu, 21 Apr 2022 00:50:26 +0000 (17:50 -0700)]
tcp: md5: incorrect tcp_header_len for incoming connections
[ Upstream commit
5b0b9e4c2c895227c8852488b3f09839233bba54 ]
In tcp_create_openreq_child we adjust tcp_header_len for md5 using the
remote address in newsk. But that address is still 0 in newsk at this
point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock).
Use the address from the request socket instead.
Fixes:
cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luca Ceresoli [Wed, 20 Apr 2022 14:24:31 +0000 (16:24 +0200)]
pinctrl: rockchip: fix RK3308 pinmux bits
[ Upstream commit
1f3e25a068832f8892a5ff71467622d012f5bc9f ]
Some of the pinmuxing bits described in rk3308_mux_recalced_data are wrong,
pointing to non-existing registers.
Fix the entire table.
Also add a comment in front of each entry with the same string that appears
in the datasheet to make the table easier to compare with the docs.
This fix has been tested on real hardware for the gpio3b3_sel entry.
Fixes:
7825aeb7b208 ("pinctrl: rockchip: add rk3308 SoC support")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220420142432.248565-1-luca.ceresoli@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eyal Birger [Wed, 20 Apr 2022 16:52:19 +0000 (19:52 +0300)]
bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
[ Upstream commit
b02d196c44ead1a5949729be9ff08fe781c3e48a ]
xmit_check_hhlen() observes the dst for getting the device hard header
length to make sure a modified packet can fit. When a helper which changes
the dst - such as bpf_skb_set_tunnel_key() - is called as part of the
xmit program the accessed dst is no longer valid.
This leads to the following splat:
BUG: kernel NULL pointer dereference, address:
00000000000000de
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:bpf_xmit+0xfb/0x17f
Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89
RSP: 0018:
ffffb148c0bc7b98 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
0000000000240008 RCX:
0000000000000000
RDX:
0000000000000010 RSI:
00000000ffffffea RDI:
00000000ffffffff
RBP:
ffff922a828a4e00 R08:
ffffffff8f1350e8 R09:
00000000ffffdfff
R10:
ffffffff8f055100 R11:
ffffffff8f105100 R12:
0000000000000000
R13:
ffff922a828a4e00 R14:
0000000000000040 R15:
0000000000000000
FS:
00007f414e8f0080(0000) GS:
ffff922afdc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000000000de CR3:
0000000002d80006 CR4:
0000000000370ef0
Call Trace:
<TASK>
lwtunnel_xmit.cold+0x71/0xc8
ip_finish_output2+0x279/0x520
? __ip_finish_output.part.0+0x21/0x130
Fix by fetching the device hard header length before running the BPF code.
Fixes:
3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Mon, 18 Apr 2022 10:21:05 +0000 (12:21 +0200)]
netfilter: nft_set_rbtree: overlap detection with element re-addition after deletion
[ Upstream commit
babc3dc9524f0bcb5a0ec61f3c3639b11508fad6 ]
This patch fixes spurious EEXIST errors.
Extend
d2df92e98a34 ("netfilter: nft_set_rbtree: handle element
re-addition after deletion") to deal with elements with same end flags
in the same transation.
Reset the overlap flag as described by
7c84d41416d8 ("netfilter:
nft_set_rbtree: Detect partial overlaps on insertion").
Fixes:
7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion")
Fixes:
d2df92e98a34 ("netfilter: nft_set_rbtree: handle element re-addition after deletion")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Wed, 20 Apr 2022 11:04:08 +0000 (19:04 +0800)]
net: dsa: Add missing of_node_put() in dsa_port_link_register_of
[ Upstream commit
fc06b2867f4cea543505acfb194c2be4ebf0c7d3 ]
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
of_node_put() will check for NULL value.
Fixes:
a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 20 Apr 2022 07:05:26 +0000 (09:05 +0200)]
memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
[ Upstream commit
7e842d70fe599bc13594b650b2144c4b6e6d6bf1 ]
HyperFlash devices fail to probe:
rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed
In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
(SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
from half of the transfer size, cfr. the rpcif_bits_set() helper
function. However, rpcif_reg_{read,write}() does not take the bus size
into account, and does not double all Manual Mode Data Register access
sizes when communicating with a HyperFlash or Octal-SPI Flash device.
Fix this, and avoid the back-and-forth conversion between transfer size
and Transfer Data Enable bits, by explicitly storing the transfer size
in struct rpcif, and using that value to determine access size in
rpcif_reg_{read,write}().
Enforce that the "high" Manual Mode Read/Write Data Registers
(SM[RW]DR1) are only used for 8-byte data accesses.
While at it, forbid writing to the Manual Mode Read Data Registers,
as they are read-only.
Fixes:
fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be
Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Fri, 15 Apr 2022 21:54:10 +0000 (23:54 +0200)]
pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI
[ Upstream commit
e74200ebf7c4f6a7a7d1be9f63833ddba251effa ]
The stm32_gpio_get() should only be called for LEVEL triggered interrupts,
skip calling it for EDGE triggered interrupts altogether to avoid wasting
CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are
the majority and LEVEL triggered interrupts are the exception no less, and
the CPU cycles are not abundant.
Fixes:
47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20220415215410.498349-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oleksandr Ocheretnyi [Sun, 17 Apr 2022 18:46:47 +0000 (11:46 -0700)]
mtd: fix 'part' field data corruption in mtd_info
[ Upstream commit
37c5f9e80e015d0df17d0c377c18523002986851 ]
Commit
46b5889cc2c5 ("mtd: implement proper partition handling")
started using "mtd_get_master_ofs()" in mtd callbacks to determine
memory offsets by means of 'part' field from mtd_info, what previously
was smashed accessing 'master' field in the mtd_set_dev_defaults() method.
That provides wrong offset what causes hardware access errors.
Just make 'part', 'master' as separate fields, rather than using
union type to avoid 'part' data corruption when mtd_set_dev_defaults()
is called.
Fixes:
46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220417184649.449289-1-oocheret@cisco.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 12 Apr 2022 08:34:31 +0000 (08:34 +0000)]
mtd: rawnand: Fix return value check of wait_for_completion_timeout
[ Upstream commit
084c16ab423a8890121b902b405823bfec5b4365 ]
wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.
Fixes:
83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Sat, 9 Apr 2022 10:59:58 +0000 (18:59 +0800)]
pinctrl: mediatek: moore: Fix build error
[ Upstream commit
87950929e2ff2236207bdbe14bff8230558b541b ]
If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails:
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config':
pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce'
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq':
pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq'
Select EINT_MTK for PINCTRL_MTK_V2 to fix this.
Fixes:
8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220409105958.37412-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Fri, 15 Apr 2022 14:03:10 +0000 (16:03 +0200)]
phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()
[ Upstream commit
2c8045d48dee703ad8eab2be7d6547765a89c069 ]
If clk_prepare_enable() fails we call clk_disable_unprepare()
in the error path what results in a warning that the clock
is disabled and unprepared already.
And if we fail later in phy_g12a_usb3_pcie_probe() then we
bail out w/o calling clk_disable_unprepare().
This patch fixes both errors.
Fixes:
36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pengcheng Yang [Tue, 12 Apr 2022 11:05:45 +0000 (19:05 +0800)]
ipvs: correctly print the memory size of ip_vs_conn_tab
[ Upstream commit
eba1a872cb73314280d5448d934935b23e30b7ca ]
The memory size of ip_vs_conn_tab changed after we use hlist
instead of list.
Fixes:
731109e78415 ("ipvs: use hlist instead of list")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adam Ford [Thu, 3 Mar 2022 17:18:17 +0000 (11:18 -0600)]
ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
[ Upstream commit
46ff3df87215ff42c0cd2c4bdb7d74540384a69c ]
The pinout of the OMAP35 and DM37 variants of the SOM-LV are the
same, but the macros which define the pinmuxing are different
between OMAP3530 and DM3730. The pinmuxing was correct for
for the DM3730, but wrong for the OMAP3530. Since the boot loader
was correctly pin-muxing the pins, this was not obvious. As the
bootloader not guaranteed to pinmux all the pins any more, this
causes an issue, so the pinmux needs to be moved from a common
file to their respective board files.
Fixes:
f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <
20220303171818.11060-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Adam Ford [Sat, 26 Feb 2022 21:48:19 +0000 (15:48 -0600)]
ARM: dts: am3517-evm: Fix misc pinmuxing
[ Upstream commit
942da3af32b2288e674736eb159d1fc676261691 ]
The bootloader for the AM3517 has previously done much of the pin
muxing, but as the bootloader is moving more and more to a model
based on the device tree, it may no longer automatically mux the
pins, so it is necessary to add the pinmuxing to the Linux device
trees so the respective peripherals can remain functional.
Fixes:
6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio")
Signed-off-by: Adam Ford <aford173@gmail.com>
Message-Id: <
20220226214820.747847-1-aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
H. Nikolaus Schaller [Tue, 8 Mar 2022 13:00:20 +0000 (14:00 +0100)]
ARM: dts: Fix mmc order for omap3-gta04
[ Upstream commit
09269dd050094593fc747f2a5853d189fefcb6b5 ]
Commit
a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
introduces general mmc aliases. Let's tailor them to the need
of the GTA04 board which does not make use of mmc2 and mmc3 interfaces.
Fixes:
a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Message-Id: <
dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.
1646744420.git.hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Boyd [Tue, 12 Apr 2022 22:00:33 +0000 (15:00 -0700)]
interconnect: qcom: sdx55: Drop IP0 interconnects
[ Upstream commit
2fb251c265608636fc961b7d38e1a03937e57371 ]
Similar to the sc7180 commit, let's drop the IP0 interconnects here
because the IP0 resource is also used in the clk-rpmh driver on sdx55.
It's bad to have the clk framework and interconnect framework control
the same RPMh resource without any coordination. The rpmh driver in the
kernel doesn't aggregate resources between clients either, so leaving
control to clk-rpmh avoids any issues with unused interconnects turning
off IP0 behind the back of the clk framework.
Cc: Alex Elder <elder@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Fixes:
b2150cab9a97 ("clk: qcom: rpmh: add support for SDX55 rpmh IPA clock")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412220033.1273607-3-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 1 Mar 2022 02:58:49 +0000 (02:58 +0000)]
phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe
[ Upstream commit
ce88613e5bd579478653a028291098143f2a5bdf ]
The pm_runtime_enable() will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for serdes_am654_probe().
Fixes:
71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 1 Mar 2022 02:46:11 +0000 (02:46 +0000)]
phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe
[ Upstream commit
d644e0d79829b1b9a14beedbdb0dc1256fc3677d ]
The pm_runtime_enable will increase power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to
undo pm_runtime_use_autosuspend()
In the PM Runtime docs:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
We should do this in error handling.
Fixes:
f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Thu, 31 Mar 2022 14:13:23 +0000 (17:13 +0300)]
ARM: dts: at91: fix pinctrl phandles
[ Upstream commit
0c640d9544d0109da3889d71ae77301e556db977 ]
Commit
bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all
gpios") introduces pinctrl phandles for pins used by individual
controllers to avoid failures due to commit
2ab73c6d8323 ("gpio:
Support GPIO controllers without pin-ranges"). For SPI controllers
available on SAMA5D4 and SAMA5D3 some of the pins are defined in
SoC specific dtsi on behalf of pinctrl-0. Adding extra pinctrl phandles
on board specific dts also on behalf of pinctrl-0 overwrite the pinctrl-0
phandle specified in SoC specific dtsi. Thus add the board specific
pinctrl to pinctrl-1.
Fixes:
bf781869e5cf ("ARM: dts: at91: add pinctrl-{names, 0} for all gpios")
Depends-on:
5c8b49852910 ("ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name")
Reported-by: Ajay Kathat <ajay.kathat@microchip.com>
Co-developed-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Ajay Kathat <ajay.kathat@microchip.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220331141323.194355-2-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Thu, 31 Mar 2022 14:13:22 +0000 (17:13 +0300)]
ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
[ Upstream commit
5c8b49852910caffeebb1ce541fdd264ffc691b8 ]
Pinctrl phandle is for spi1 so rename it to reflect this.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220331141323.194355-1-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Mon, 4 Apr 2022 10:28:05 +0000 (11:28 +0100)]
ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
[ Upstream commit
0e486fe341fabd8e583f3d601a874cd394979c45 ]
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC and is expected to be set to 12MHz. Previously
this was mapped using pre-common clock API calls in the audio machine
driver but the conversion to the common clock framework broke that so
describe things in the DT instead.
Fixes:
ff78a189b0ae55f ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220404102806.581374-2-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Fri, 18 Mar 2022 10:57:46 +0000 (10:57 +0000)]
phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks
[ Upstream commit
3588060befff75ff39fab7122b94c6fb3148fcda ]
The corresponding API for clk_prepare_enable is clk_disable_unprepare.
Make sure that the clock is unprepared on exit by changing clk_disable
to clk_disable_unprepare.
Fixes:
ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>