Douglas Anderson [Fri, 15 Jan 2021 22:44:18 +0000 (14:44 -0800)]
drm/panel-simple: Retry if we timeout waiting for HPD
On an Innolux N116BCA panel that I have in front of me, sometimes HPD
simply doesn't assert no matter how long you wait for it. As per the
very wise advice of The IT Crowd ("Have you tried turning it off and
on again?") it appears that power cycling is enough to kick this panel
back into a sane state.
>From tests on this panel, it appears that leaving it powered off for a
while stimulates the problem. Adding a 6 second sleep at the start of
panel_simple_prepare_once() makes it happen fairly reliably and, with
this delay, I saw up to 3 retries needed sometimes. Without the 6
second sleep, however, the panel came up much more reliably the first
time or after only 1 retry.
While it's unknown what the problems are with this panel (and probably
the hardware should be debugged), adding a few retries to the power on
routine doesn't seem insane. Even if this panel's problems are
attributed to the fact that it's pre-production and/or can be fixed,
retries clearly can help in some cases and really don't hurt.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.3.I6916959daa7c5c915e889442268d23338de17923@changeid
Douglas Anderson [Fri, 15 Jan 2021 22:44:17 +0000 (14:44 -0800)]
drm/panel-simple: Don't wait longer for HPD than hpd_absent_delay
If a panel has an hpd_absent_delay specified then we know exactly how
long the maximum time is before HPD must be asserted. That means we
can use it as a timeout for polling the HPD pin instead of using an
arbitrary timeout. This is especially useful for dealing with panels
that periodically fail to power on and need to be retried. We can
detect the problem sooner.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.2.I183b1817610d7a82fdd3bc852e96d2985df9623f@changeid
Douglas Anderson [Fri, 15 Jan 2021 22:44:16 +0000 (14:44 -0800)]
drm/panel-simple: Undo enable if HPD never asserts
If the HPD signal never asserts in panel_simple_prepare() and we
return an error, we should unset the enable GPIO and disable the
regulator to make it consistent for the caller.
At the moment I have some hardware where HPD sometimes doesn't assert.
Obviously that needs to be debugged, but this patch makes it so that
if I add a retry that I can make things work.
Fixes:
48834e6084f1 ("drm/panel-simple: Support hpd-gpios for delaying prepare()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.1.I33fcbd64ab409cfe4f9491bf449f51925a4d3281@changeid
Tian Tao [Wed, 3 Mar 2021 01:39:46 +0000 (09:39 +0800)]
drm/vboxvideo: Use managed VRAM-helper initialization
updated to use drmm_vram_helper_init().
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1614735587-6621-1-git-send-email-tiantao6@hisilicon.com
Simon Ser [Thu, 4 Mar 2021 22:08:37 +0000 (23:08 +0100)]
drm/uapi: document kernel capabilities
Document all of the DRM_CAP_* defines.
v2 (Pekka):
- Describe what the bit depth is
- Expand on preferred dumb buffer memory access patterns
- Explain what a PRIME buffer is
- Mention DRM_IOCTL_PRIME_FD_TO_HANDLE and DRM_IOCTL_PRIME_HANDLE_TO_FD
- Explicitly reference CLOCK_REALTIME and CLOCK_MONOTONIC
- Make it clear DRM_CAP_CRTC_IN_VBLANK_EVENT applies to both DRM_EVENT_VBLANK
and DRM_EVENT_FLIP_COMPLETE
v3 (Daniel):
- Specify kernel versions for caps that don't depend on drivers
- Make it clear dumb buffers caps are only about dumb buffers
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210308123421.747836-1-contact@emersion.fr
xndcn [Fri, 5 Mar 2021 15:18:19 +0000 (23:18 +0800)]
drm/virtio: fix possible leak/unlock virtio_gpu_object_array
virtio_gpu_object array is not freed or unlocked in some
failed cases.
Signed-off-by: xndcn <xndchn@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210305151819.14330-1-xndchn@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Yannick Fertre [Mon, 22 Feb 2021 09:22:57 +0000 (09:22 +0000)]
drm/stm: dsi: Avoid printing errors for -EPROBE_DEFER
Don't print error when probe deferred error is returned.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222092205.32086-2-raphael.gallais-pou@foss.st.com
Christian König [Sat, 20 Feb 2021 08:50:42 +0000 (09:50 +0100)]
drm/sched: select new rq even if there is only one v3
This is necessary when changing priorities of an entity.
v2: test the sched_list instead of num_sched.
v3: set the sched_list to NULL when there is only one entry
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305125155.2312-1-christian.koenig@amd.com
Jagan Teki [Tue, 2 Mar 2021 17:57:00 +0000 (23:27 +0530)]
drm/stm: ltdc: Use simple encoder
STM ltdc driver uses an empty implementation for its encoder.
Replace the code with the generic simple encoder.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302175700.28640-1-jagan@amarulasolutions.com
Jianhui Zhao [Mon, 8 Mar 2021 06:42:50 +0000 (14:42 +0800)]
docs: gpu: fix typo
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210308064250.3681707-1-zhaojh329@gmail.com
Paul Cercueil [Sun, 24 Jan 2021 08:55:52 +0000 (08:55 +0000)]
drm/ingenic: Fix non-OSD mode
Even though the JZ4740 did not have the OSD mode, it had (according to
the documentation) two DMA channels, but there is absolutely no
information about how to select the second DMA channel.
Make the ingenic-drm driver work in non-OSD mode by using the
foreground0 plane (which is bound to the DMA0 channel) as the primary
plane, instead of the foreground1 plane, which is the primary plane
when in OSD mode.
Fixes:
3c9bea4ef32b ("drm/ingenic: Add support for OSD mode")
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210124085552.29146-5-paul@crapouillou.net
Linus Walleij [Thu, 4 Mar 2021 00:41:38 +0000 (01:41 +0100)]
drm/mcde/panel: Inverse misunderstood flag
A recent patch renaming MIPI_DSI_MODE_EOT_PACKET to
MIPI_DSI_MODE_NO_EOT_PACKET brought to light the
misunderstanding in the current MCDE driver and all
its associated panel drivers that MIPI_DSI_MODE_EOT_PACKET
would mean "use EOT packet" when in fact it means the
reverse.
Fix it up by implementing the flag right in the MCDE
DSI driver and remove the flag from panels that actually
want the EOT packet.
Suggested-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Fixes:
5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Fixes:
899f24ed8d3a ("drm/panel: Add driver for Novatek NT35510-based panels")
Fixes:
ac1d6d74884e ("drm/panel: Add driver for Samsung S6D16D0 panel")
Fixes:
435e06c06cb2 ("drm/panel: s6e63m0: Add DSI transport")
Fixes:
8152c2bfd780 ("drm/panel: Add driver for Sony ACX424AKP panel")
Link: https://patchwork.freedesktop.org/patch/msgid/20210304004138.1785057-1-linus.walleij@linaro.org
Lionel Landwerlin [Tue, 2 Mar 2021 18:44:27 +0000 (20:44 +0200)]
drm: fix drm_mode_create_blob comment
Just a silly mistake
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210302184427.1301264-1-lionel.g.landwerlin@intel.com
Daniel Vetter [Fri, 26 Feb 2021 13:36:47 +0000 (14:36 +0100)]
drm/arcpgu: Really delete file
Somehow this got forgotten when I applied the patch in
commit
e2c406ea0b0d398a4afda5702957064cc74f8c25
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jan 12 09:43:54 2021 +0100
drm/arc: Inline arcpgu_crtc.c
Fixes:
e2c406ea0b0d ("drm/arc: Inline arcpgu_crtc.c")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210226133647.1403642-1-daniel.vetter@ffwll.ch
Jan Beulich [Tue, 23 Feb 2021 16:41:03 +0000 (17:41 +0100)]
drm/xen: adjust Kconfig
By having selected DRM_XEN, I was assuming I would build the frontend
driver. As it turns out this is a dummy option, and I have really not
been building this (because I had DRM disabled). Make it a promptless
one, moving the "depends on" to the other, real option, and "select"ing
the dummy one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/54ae54f9-1ba9-900b-a56f-f48e2c9a82b0@suse.com
Zack Rusin [Wed, 17 Feb 2021 18:55:21 +0000 (13:55 -0500)]
drm/vmwgfx: Bump the minor version and cleanup logging
We should advertise the reworked fifo/cmd handling and huge pages
support. Also while bumping the version number lets cleanup
the logging, there's no point in logging whether we're atomic
(we always are) or what repo we use (it's always in kernel now).
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224163034.918430-1-zackr@vmware.com
Daniel Vetter [Mon, 22 Feb 2021 10:06:08 +0000 (11:06 +0100)]
drm/compat: more dummy implementations
drm_noop really doesn't do much, and who cares about the permission checks.
So let's delete some code.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222100608.400730-1-daniel.vetter@ffwll.ch
Daniel Vetter [Mon, 22 Feb 2021 10:06:43 +0000 (11:06 +0100)]
drm/compat: Clear bounce structures
Some of them have gaps, or fields we don't clear. Native ioctl code
does full copies plus zero-extends on size mismatch, so nothing can
leak. But compat is more hand-rolled so need to be careful.
None of these matter for performance, so just memset.
Also I didn't fix up the CONFIG_DRM_LEGACY or CONFIG_DRM_AGP ioctl, those
are security holes anyway.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reported-by: syzbot+620cf21140fc7e772a5d@syzkaller.appspotmail.com # vblank ioctl
Cc: syzbot+620cf21140fc7e772a5d@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222100643.400935-1-daniel.vetter@ffwll.ch
Rikard Falkeborn [Tue, 9 Feb 2021 23:48:17 +0000 (00:48 +0100)]
drm/nouveau/ttm: constify static vm_operations_struct
The only usage of nouveau_ttm_vm_ops is to assign its address to the
vm_ops field in the vm_area_struct struct. Make it const to allow the
compiler to put it in read-only memory
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209234817.55112-4-rikard.falkeborn@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Rikard Falkeborn [Tue, 9 Feb 2021 23:48:16 +0000 (00:48 +0100)]
drm/radeon/ttm: constify static vm_operations_struct
The only usage of radeon_ttm_vm_ops is to assign its address to the
vm_ops field in the vm_area_struct struct. Make it const to allow the
compiler to put it in read-only memory
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209234817.55112-3-rikard.falkeborn@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Rikard Falkeborn [Tue, 9 Feb 2021 23:48:15 +0000 (00:48 +0100)]
drm/amdgpu/ttm: constify static vm_operations_struct
The only usage of amdgpu_ttm_vm_ops is to assign its address to the
vm_ops field in the vm_area_struct struct. Make it const to allow the
compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209234817.55112-2-rikard.falkeborn@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
John Stultz [Tue, 9 Feb 2021 19:48:18 +0000 (19:48 +0000)]
dma-buf: heaps: Fix the name used when exporting dmabufs to be the actual heap name
By default dma_buf_export() sets the exporter name to be
KBUILD_MODNAME. Unfortunately this may not be identical to the
string used as the heap name (ie: "system" vs "system_heap").
This can cause some minor confusion with tooling, and there is
the future potential where multiple heap types may be exported
by the same module (but would all have the same name).
So to avoid all this, set the exporter exp_name to the heap name.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209194818.2459062-2-john.stultz@linaro.org
John Stultz [Tue, 9 Feb 2021 19:48:17 +0000 (19:48 +0000)]
dma-buf: dma-heap: Provide accessor to get heap name
It can be useful to access the name for the heap,
so provide an accessor to do so.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209194818.2459062-1-john.stultz@linaro.org
xinhui pan [Wed, 24 Feb 2021 03:28:08 +0000 (11:28 +0800)]
drm/ttm: Do not add non-system domain BO into swap list
BO would be added into swap list if it is validated into system domain.
If BO is validated again into non-system domain, say, VRAM domain. It
actually should not be in the swap list.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224032808.150465-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Daniel Vetter [Tue, 12 Jan 2021 08:43:58 +0000 (09:43 +0100)]
drm/arc: Move to drm/tiny
Because it is.
v2: Delete now unused crtc funcs (0day)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-15-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:57 +0000 (09:43 +0100)]
drm/arc: Initialize sim connector before display pipe
That way we can get rid of this final piece of init code, and use the
simple pipe helpers as intended.
v2: Fix indent (Sam)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-14-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:56 +0000 (09:43 +0100)]
drm/arc: Inline remaining files
At less than 500 lines total feels like the right thing to do.
Also noticed that the simple wrapper around drm_connector_cleanup can
be dropped.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-13-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:55 +0000 (09:43 +0100)]
drm/arc: Inline arcpgu_drm_hdmi_init
Really not worth the function, much less the separate file now that
almost all the code is gone.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-12-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:54 +0000 (09:43 +0100)]
drm/arc: Inline arcpgu_crtc.c
Really not big anymore.
Note that we no longer clamp all errors to ENODEV, highlighted by Sam.
v2: Fixup update function, bug reported by Eugeniy
v3: Delete now unused crtc funcs (0day)
v4: Move encoder removal to right patch (Sam).
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-11-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:53 +0000 (09:43 +0100)]
drm/arc: Drop crtc check in arc_pgu_update
It's redundant, drm core guarantees that state->fb is set iff
state->crtc is set.
v2: I had a misconception about simple helpers here and thought they
filter this out. They don't. Issue reported by Eugeniy.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-10-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:52 +0000 (09:43 +0100)]
drm/arc: Convert to drm_simple_kms_pipe_helper
Really straighforward, only slight issue is that the sim connector is
created after the pipe is set up, so can't use the helpers perfectly
yet. Subsequent patches will fix that.
Aside from lots of deleting code no functional changes in here.
v2: Delete now unused crtc funcs (0day)
v3: Move endcoder setup removal to right patch (Sam)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-9-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:51 +0000 (09:43 +0100)]
drm/arc: Align with simple pipe helpers
Simple pipe helpers only have an enable and disable hook, no more
mode_set_nofb. Call it from our enable hook to align with that
conversions.
Atomic helpers always call mode_set_nofb and enable together, so
there's no functional change here.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-8-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:50 +0000 (09:43 +0100)]
drm/arc: Use drmm_mode_config_cleanup
With autocleanup through drm_device management we can delete all the
code. Possible now that there's no confusion against devm_kzalloc'ed
structures anymore.
I inlined arcpgu_setup_mode_config because it's tiny and the newly
needed return value handling would have been more ...
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-7-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:49 +0000 (09:43 +0100)]
drm/arc: Drop surplus connector registration
drm_connector_register does nothing before drm_dev_register(), it
is meant for hotpluggable connectors only. Same for the unregister side.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-6-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:48 +0000 (09:43 +0100)]
drm/arc: Embedd a drm_connector for sim case
Removes the last devm_kzalloc, which means we're now prepared to use
drmm_mode_config_cleanup!
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-5-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:47 +0000 (09:43 +0100)]
drm/arc: Embedded a drm_simple_display_pipe
This is a prep step to convert arc over to the simple kms helpers, for
now we just use this as an embedding container to drop all the various
allocations. Big change is the removal of the various devm_kzalloc,
which have the wrong lifetimes anyway.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-4-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:46 +0000 (09:43 +0100)]
drm/arc: Delete arcpgu_priv->fb
Leftover from the conversion to the generic fbdev emulation.
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-3-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:45 +0000 (09:43 +0100)]
drm/arc: Stop using drm_device->dev_private
Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-2-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 12 Jan 2021 08:43:44 +0000 (09:43 +0100)]
drm/arc: Switch to devm_drm_dev_alloc
- Need to embedded the drm_device, but for now we keep the usual
pointer chasing.
- No more devm_kzalloc, which fixes a lifetime issues on driver
remove.
- No more drm_dev_put, that's done by devm_ now.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112084358.2771527-1-daniel.vetter@ffwll.ch
Noralf Trønnes [Fri, 19 Feb 2021 12:22:03 +0000 (13:22 +0100)]
drm/shmem-helpers: vunmap: Don't put pages for dma-buf
dma-buf importing was reworked in commit
7d2cd72a9aa3
("drm/shmem-helpers: Simplify dma-buf importing"). Before that commit
drm_gem_shmem_prime_import_sg_table() did set ->pages_use_count=1 and
drm_gem_shmem_vunmap_locked() could call drm_gem_shmem_put_pages()
unconditionally. Now without the use count set, put pages is called also
on dma-bufs. Fix this by only putting pages if it's not imported.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Fixes:
7d2cd72a9aa3 ("drm/shmem-helpers: Simplify dma-buf importing")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219122203.51130-1-noralf@tronnes.org
Maxime Ripard [Fri, 19 Feb 2021 12:00:31 +0000 (13:00 +0100)]
drm/todo: Remove the drm_atomic_state todo item
Only planes' prepare_fb and cleanup_fb, and encoders' atomic_check and
atomic_mode_set hooks remain with an object state and not the global
drm_atomic_state.
prepare_fb and cleanup_fb operate by design on a given state and
depending on the calling site can operate on either the old or new
state, so it doesn't really make much sense to convert them.
The encoders' atomic_check and atomic_mode_set operate on the CRTC and
connector state connected to them since encoders don't have a state of
their own. Without those state pointers, we would need to get the CRTC
through the drm_connector_state crtc pointer.
However, in order to get the drm_connector_state pointer, we would need
to get the connector itself and while usually we have a single connector
connected to the encoder, we can't really get it from the encoder at
the moment since it could be behind any number of bridges.
While this could be addressed by (for example) listing all the
connectors and finding the one that has the encoder as its source, it
feels like an unnecessary rework for something that is slowly getting
replaced by bridges.
Since all the users that matter have been converted, let's remove the
TODO item.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-11-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:30 +0000 (13:00 +0100)]
drm: Use state helper instead of the plane state pointer
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.
Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:29 +0000 (13:00 +0100)]
drm/atomic: Pass the full state to planes atomic disable and update
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert the remaining helpers to provide a consistent interface,
this time with the planes atomic_update and atomic_disable.
The conversion was done using the coccinelle script below, built tested on
all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
void (*atomic_update)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
void (*atomic_disable)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier crtc_state;
identifier plane, plane_state, state;
expression e;
@@
f(struct drm_crtc_state *crtc_state)
{
...
struct drm_atomic_state *state = e;
<+...
(
- FUNCS->atomic_disable(plane, plane_state)
+ FUNCS->atomic_disable(plane, state)
|
- FUNCS->atomic_update(plane, plane_state)
+ FUNCS->atomic_update(plane, state)
)
...+>
}
@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *state)
+ struct drm_plane_state *old_plane_state)
{
<...
- state
+ old_plane_state
...>
}
@ ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, old_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
... when != old_state
}
@ adds_old_state depends on plane_atomic_func && !ignores_old_state @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *plane_state)
{
+ struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_old_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_old_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
<+...
- plane_state->state
+ state
...+>
}
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:28 +0000 (13:00 +0100)]
drm: Rename plane->state variables in atomic update and disable
Some drivers are storing the plane->state pointer in atomic_update and
atomic_disable in a variable simply called state, while the state passed
as an argument is called old_state.
In order to ease subsequent reworks and to avoid confusing or
inconsistent names, let's rename those variables to new_state.
This was done using the following coccinelle script, plus some manual
changes for mtk and tegra.
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ moves_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *new_state = plane->state;
...
}
@ depends on moves_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
identifier old_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
<...
- state
+ new_state
...>
}
@ moves_new_state_oldstate @
identifier plane_atomic_func.func;
identifier plane;
symbol oldstate;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *oldstate)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *newstate = plane->state;
...
}
@ depends on moves_new_state_oldstate @
identifier plane_atomic_func.func;
identifier plane;
identifier old_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
<...
- state
+ newstate
...>
}
@ moves_new_state_old_pstate @
identifier plane_atomic_func.func;
identifier plane;
symbol old_pstate;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_pstate)
{
...
- struct drm_plane_state *state = plane->state;
+ struct drm_plane_state *new_pstate = plane->state;
...
}
@ depends on moves_new_state_old_pstate @
identifier plane_atomic_func.func;
identifier plane;
identifier old_pstate;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_pstate)
{
<...
- state
+ new_pstate
...>
}
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:27 +0000 (13:00 +0100)]
drm: Store new plane state in a variable for atomic_update and disable
In order to store the new plane state in a subsequent helper, let's move
the plane->state dereferences into a variable.
This was done using the following coccinelle script, plus some hand
changes for vmwgfx:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ has_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
identifier new_state;
symbol old_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
...
struct drm_plane_state *new_state = plane->state;
...
}
@ depends on !has_new_state_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_state)
{
+ struct drm_plane_state *new_state = plane->state;
<+...
- plane->state
+ new_state
...+>
}
@ has_new_state_state @
identifier plane_atomic_func.func;
identifier plane;
identifier new_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
struct drm_plane_state *new_state = plane->state;
...
}
@ depends on !has_new_state_state @
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *state)
{
+ struct drm_plane_state *new_plane_state = plane->state;
<+...
- plane->state
+ new_plane_state
...+>
}
@ has_new_state_old_s @
identifier plane_atomic_func.func;
identifier plane;
identifier new_state;
symbol old_s;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_s)
{
...
struct drm_plane_state *new_state = plane->state;
...
}
@ depends on !has_new_state_old_s @
identifier plane_atomic_func.func;
identifier plane;
symbol old_s;
@@
func(struct drm_plane *plane, struct drm_plane_state *old_s)
{
+ struct drm_plane_state *new_s = plane->state;
<+...
- plane->state
+ new_s
...+>
}
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:26 +0000 (13:00 +0100)]
drm: Use state helper instead of plane state pointer in atomic_check
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_check hook, which would be the old
plane state in the global atomic state since _swap_state hasn't happened
when atomic_check is run.
Use the drm_atomic_get_old_plane_state helper to get that state to make
it more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@ replaces_old_state @
identifier plane_atomic_func.func;
identifier plane, state, plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
- struct drm_plane_state *plane_state = plane->state;
+ struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
...
}
@@
identifier plane_atomic_func.func;
identifier plane, state, plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane);
<...
- plane->state
+ plane_state
...>
}
@ adds_old_state @
identifier plane_atomic_func.func;
identifier plane, state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
+ struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane);
<...
- plane->state
+ old_plane_state
...>
}
@ include depends on adds_old_state || replaces_old_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && (adds_old_state || replaces_old_state) @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-6-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:25 +0000 (13:00 +0100)]
drm: Use the state pointer directly in planes atomic_check
Now that atomic_check takes the global atomic state as a parameter, we
don't need to go through the pointer in the plane state.
This was done using the following coccinelle script:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
- struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
<... when != plane_state
- plane_state->state
+ state
...>
}
@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
<...
- plane_state->state
+ state
...>
}
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:24 +0000 (13:00 +0100)]
drm/atomic: Pass the full state to planes atomic_check
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.
The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}
@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}
@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:23 +0000 (13:00 +0100)]
drm/atmel-hlcdc: Rename custom plane state variable
Subsequent reworks will pass the global atomic state in the function
prototype, and atomic_check and atomic_update already have such a
variable already. Let's change them to ease the rework.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-3-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:22 +0000 (13:00 +0100)]
drm: Rename plane atomic_check state names
Most drivers call the argument to the plane atomic_check hook simply
state, which is going to conflict with the global atomic state in a
later rework. Let's rename it to new_plane_state (or new_state depending
on the convention used in the driver).
This was done using the coccinelle script below, and built tested:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
.atomic_check = func,
};
@ has_old_state @
identifier plane_atomic_func.func;
identifier plane;
expression e;
symbol old_state;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
struct drm_plane_state *old_state = e;
...
}
@ depends on has_old_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *state
+ struct drm_plane_state *new_state
)
{
<+...
- state
+ new_state
...+>
}
@ has_state @
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@
func(struct drm_plane *plane, struct drm_plane_state *state)
{
...
}
@ depends on has_state @
identifier plane_atomic_func.func;
identifier plane;
symbol old_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *state
+ struct drm_plane_state *new_plane_state
)
{
<+...
- state
+ new_plane_state
...+>
}
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
Maxime Ripard [Fri, 19 Feb 2021 12:00:21 +0000 (13:00 +0100)]
drm/atomic: Pass the full state to planes async atomic check and update
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's start convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_async_check and
atomic_async_update.
The conversion was done using the coccinelle script below, built tested on
all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
int (*atomic_async_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
void (*atomic_async_update)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_async_check = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_async_update = func,
...,
};
)
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_async_check(plane, plane_state)
+ FUNCS->atomic_async_check(plane, state)
...+>
}
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_async_update(plane, plane_state)
+ FUNCS->atomic_async_update(plane, state)
...+>
}
@@
identifier mtk_plane_atomic_async_update;
identifier plane;
symbol new_state, state;
expression e;
@@
void mtk_plane_atomic_async_update(struct drm_plane *plane, struct drm_plane_state *new_state)
{
...
- struct mtk_plane_state *state = e;
+ struct mtk_plane_state *new_plane_state = e;
<+...
- state
+ new_plane_state
...+>
}
@@
identifier plane_atomic_func.func;
identifier plane;
symbol state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *state)
+ struct drm_plane_state *new_plane_state)
{
<...
- state
+ new_plane_state
...>
}
@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}
@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
@@
identifier plane_atomic_func.func;
identifier plane, state;
identifier plane_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state) {
...
struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
<+...
- plane_state->state
+ state
...+>
}
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-1-maxime@cerno.tech
Wayne Lin [Wed, 24 Feb 2021 10:15:21 +0000 (18:15 +0800)]
drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcast
[Why & How]
According to DP spec, CLEAR_PAYLOAD_ID_TABLE is a path broadcast request
message and current implementation is incorrect. Fix it.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224101521.6713-3-Wayne.Lin@amd.com
Wayne Lin [Wed, 24 Feb 2021 10:15:20 +0000 (18:15 +0800)]
drm/dp_mst: Revise broadcast msg lct & lcr
[Why & How]
According to DP spec, broadcast message LCT equals to 1 and LCR equals
to 6. Current implementation is incorrect. Fix it.
In addition, revise a bit the hdr->rad handling to include broadcast
case.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224101521.6713-2-Wayne.Lin@amd.com
Mario Kleiner [Sun, 24 Jan 2021 04:40:10 +0000 (05:40 +0100)]
drm: Fix HDMI_STATIC_METADATA_TYPE1 constant
According to the CTA 861.G spec, HDMI_STATIC_METADATA_TYPE1 is
not 1, but zero, so fix this enum.
While this doesn't cause problems in the kernel yet, as the
constant isn't actively used by drivers yet, it did create
confusion while debugging HDR problems in yours truly, and
also potential bugs in userspace components, as the wrong
enum propagates to components, e.g., like it did already
into intel-gpu-tools (tests/kms_hdr.c) or is used as wrong
reference when writing future new userspace HDR components
like compositors.
Fixes:
fbb5d0353c62 ("drm: Add HDR source metadata property")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210124044010.18678-1-mario.kleiner.de@gmail.com
Daniel Vetter [Thu, 21 Jan 2021 15:29:50 +0000 (16:29 +0100)]
drm/vkms: Annotate vblank timer
This is needed to signal the fences from page flips, annotate it
accordingly. We need to annotate entire timer callback since if we get
stuck anywhere in there, then the timer stops, and hence fences stop.
Just annotating the top part that does the vblank handling isn't
enough.
Tested-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-3-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 21 Jan 2021 15:29:52 +0000 (16:29 +0100)]
drm/komeda: Annotate dma-fence critical section in commit path
Like the helpers, nothing special. Well except not, because we the
critical section extends until after hw_done(), since that's the last
thing which could hold up a subsequent atomic commit. That means the
wait_for_flip_done is included, but that's not a problem, we're
allowed to call dma_fence_wait() from signalling critical sections.
Even on our own fence (which this does), it's just a bit confusing.
But in a way those last 2 function calls are already part of the fence
signalling critical section for the next atomic commit.
Reading this I'm wondering why komeda waits for flip_done() before
calling hw_done(), which is a bit backwards (but hey hw can be
special). Might be good to throw a comment in there that explains why,
because the original commit that added this just doesn't.
v2: Small rebase
Reviewed-by: James Qian Wang <james.qian.wang@arm.com> (v1)
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-5-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 21 Jan 2021 15:29:53 +0000 (16:29 +0100)]
drm/malidp: Annotate dma-fence critical section in commit path
Again needs to be put right after the call to
drm_atomic_helper_commit_hw_done(), since that's the last thing which
can hold up a subsequent atomic commit.
No surprises here.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-6-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 21 Jan 2021 15:29:54 +0000 (16:29 +0100)]
drm/atmel: Use drm_atomic_helper_commit
One of these drivers that predates the nonblocking support in helpers,
and hand-rolled its own thing. Entirely not anything specific here, we
can just delete it all and replace it with the helper version.
Could also perhaps use the drm_mode_config_helper_suspend/resume
stuff, for another few lines deleted. But I'm not looking at that
stuff, I'm just going through all the atomic commit functions and make
sure they have properly annotated dma-fence critical sections
everywhere.
v2:
- Also delete the workqueue (Sam)
- drop the @commit kerneldoc, I missed that one.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-7-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 21 Jan 2021 15:29:56 +0000 (16:29 +0100)]
drm/omapdrm: Annotate dma-fence critical section in commit path
Nothing special, just put the end right after hw_done(). Note that in
one path there's a wait for the flip/update to complete. But as far as
I understand from comments and code that's only relevant for modesets,
and skipped if there wasn't a modeset done on a given crtc.
For a bit more clarity pull the hw_done() call out of the if/else,
that way it's a bit clearer flow. But happy to shuffle this around as
is seen fit.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-9-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 21 Jan 2021 15:29:58 +0000 (16:29 +0100)]
drm/tegra: Annotate dma-fence critical section in commit path
Again ends just after drm_atomic_helper_commit_hw_done(), but with the
twist that we need to make sure we're only annotate the custom
version. And not the other clause which just calls
drm_atomic_helper_commit_tail_rpm(), which is already annotated.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-11-daniel.vetter@ffwll.ch
Daniel Vetter [Thu, 21 Jan 2021 15:29:59 +0000 (16:29 +0100)]
drm/tidss: Annotate dma-fence critical section in commit path
Ends right after hw_done(), totally standard case.
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-12-daniel.vetter@ffwll.ch
Thomas Zimmermann [Mon, 22 Feb 2021 14:17:56 +0000 (15:17 +0100)]
drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpers
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting,
but currently located next to framebuffer helpers. Move it to GEM atomic
helpers, rename it slightly and adopt the drivers. Same for the rsp
simple-pipe helper.
Compile-tested with x86-64, aarch64 and arm. The patch is fairly large,
but there are no functional changes.
v3:
* remove out-comented line in drm_gem_framebuffer_helper.h
(Maxime)
v2:
* rename to drm_gem_plane_helper_prepare_fb() (Daniel)
* add tutorial-style documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
Tong Zhang [Mon, 22 Feb 2021 02:33:22 +0000 (21:33 -0500)]
drm/ast: fix memory leak when unload the driver
a connector is leaked upon module unload, it seems that we should do
similar to sample driver as suggested in drm_drv.c.
Adding drm_atomic_helper_shutdown() in ast_pci_remove to prevent leaking.
[ 153.822134] WARNING: CPU: 0 PID: 173 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cle0
[ 153.822698] Modules linked in: ast(-) drm_vram_helper drm_ttm_helper ttm [last unloaded: ttm]
[ 153.823197] CPU: 0 PID: 173 Comm: modprobe Tainted: G W 5.11.0-03615-g55f62bc873474
[ 153.823708] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4
[ 153.824333] RIP: 0010:drm_mode_config_cleanup+0x418/0x470
[ 153.824637] Code: 0c 00 00 00 00 48 8b 84 24 a8 00 00 00 65 48 33 04 25 28 00 00 00 75 65 48 81 c0
[ 153.825668] RSP: 0018:
ffff888103c9fb70 EFLAGS:
00010212
[ 153.825962] RAX:
ffff888102b0d100 RBX:
ffff888102b0c298 RCX:
ffffffff818d8b2b
[ 153.826356] RDX:
dffffc0000000000 RSI:
000000007fffffff RDI:
ffff888102b0c298
[ 153.826748] RBP:
ffff888103c9fba0 R08:
0000000000000001 R09:
ffffed1020561857
[ 153.827146] R10:
ffff888102b0c2b7 R11:
ffffed1020561856 R12:
ffff888102b0c000
[ 153.827538] R13:
ffff888102b0c2d8 R14:
ffff888102b0c2d8 R15:
1ffff11020793f70
[ 153.827935] FS:
00007f24bff456a0(0000) GS:
ffff88815b400000(0000) knlGS:
0000000000000000
[ 153.828380] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 153.828697] CR2:
0000000001c39018 CR3:
0000000103c90000 CR4:
00000000000006f0
[ 153.829096] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 153.829486] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 153.829883] Call Trace:
[ 153.830024] ? drmm_mode_config_init+0x930/0x930
[ 153.830281] ? cpumask_next+0x16/0x20
[ 153.830488] ? mnt_get_count+0x66/0x80
[ 153.830699] ? drm_mode_config_cleanup+0x470/0x470
[ 153.830972] drm_managed_release+0xed/0x1c0
[ 153.831208] drm_dev_release+0x3a/0x50
[ 153.831420] release_nodes+0x39e/0x410
[ 153.831631] ? devres_release+0x40/0x40
[ 153.831852] device_release_driver_internal+0x158/0x270
[ 153.832143] driver_detach+0x76/0xe0
[ 153.832344] bus_remove_driver+0x7e/0x100
[ 153.832568] pci_unregister_driver+0x28/0xf0
[ 153.832821] __x64_sys_delete_module+0x268/0x300
[ 153.833086] ? __ia32_sys_delete_module+0x300/0x300
[ 153.833357] ? call_rcu+0x372/0x4f0
[ 153.833553] ? fpregs_assert_state_consistent+0x4d/0x60
[ 153.833840] ? exit_to_user_mode_prepare+0x2f/0x130
[ 153.834118] do_syscall_64+0x33/0x40
[ 153.834317] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 153.834597] RIP: 0033:0x7f24bfec7cf7
[ 153.834797] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41
[ 153.835812] RSP: 002b:
00007fff72e6cb58 EFLAGS:
00000202 ORIG_RAX:
00000000000000b0
[ 153.836234] RAX:
ffffffffffffffda RBX:
00007f24bff45690 RCX:
00007f24bfec7cf7
[ 153.836623] RDX:
00000000ffffffff RSI:
0000000000000080 RDI:
0000000001c2fb10
[ 153.837018] RBP:
0000000001c2fac0 R08:
2f2f2f2f2f2f2f2f R09:
0000000001c2fac0
[ 153.837408] R10:
fefefefefefefeff R11:
0000000000000202 R12:
0000000001c2fac0
[ 153.837798] R13:
0000000001c2f9d0 R14:
0000000000000000 R15:
0000000000000001
[ 153.838194] ---[ end trace
b92031513bbe596c ]---
[ 153.838441] [drm:drm_mode_config_cleanup] *ERROR* connector VGA-1 leaked!
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222023322.984885-1-ztong0001@gmail.com
Kai-Heng Feng [Fri, 29 Jan 2021 08:43:27 +0000 (16:43 +0800)]
efifb: Ensure graphics device for efifb stays at PCI D0
We are seeing root ports on some desktop boards support D3cold for
discrete graphics card. So when efifb is in use while graphics device
isn't bound to a driver, PCI and ACPI will put the graphics to D3cold
when runtime suspend kicks in, makes efifb stop working.
So ensure the graphics device won't be runtime suspended, to keep efifb
work all the time.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129084327.986630-1-kai.heng.feng@canonical.com
Tian Tao [Fri, 19 Feb 2021 02:30:11 +0000 (10:30 +0800)]
drm/drv: Remove initialization of static variables
Address the following checkpatch errors:
ERROR: do not initialise statics to false
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1613701811-32037-1-git-send-email-tiantao6@hisilicon.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:13 +0000 (13:32 +0100)]
drm/qxl: add lock asserts to qxl_bo_vmap_locked + qxl_bo_vunmap_locked
Try avoid re-introducing locking bugs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-12-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:12 +0000 (13:32 +0100)]
drm/qxl: rework cursor plane
Add helper functions to create and move the cursor.
Create the cursor_bo in prepare_fb callback, in the
atomic_commit callback we only send the update command
to the host.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-11-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:11 +0000 (13:32 +0100)]
drm/qxl: move shadow handling to new qxl_prepare_shadow()
Pure code motion, no functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-10-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:10 +0000 (13:32 +0100)]
drm/qxl: fix monitors object vmap
Use the correct vmap variant. We don't hold a reservation here,
so we can't use the _locked variant. We can drop the pin because
qxl_bo_vmap will do that for us.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-9-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:09 +0000 (13:32 +0100)]
drm/qxl: fix prime vmap
Use the correct vmap variant. We don't have a reservation here,
so we can't use the _locked version.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-8-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:08 +0000 (13:32 +0100)]
drm/qxl: add qxl_bo_vmap/qxl_bo_vunmap
Add vmap/vunmap variants which reserve (and pin) the bo.
They can be used in case the caller doesn't hold a reservation
for the bo.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-7-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:07 +0000 (13:32 +0100)]
drm/qxl: rename qxl_bo_kmap -> qxl_bo_vmap_locked
Append _locked to Make clear that these functions should be called with
reserved bo's only. While being at it also rename kmap -> vmap.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-6-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:06 +0000 (13:32 +0100)]
drm/qxl: fix lockdep issue in qxl_alloc_release_reserved
Call qxl_bo_unpin (which does a reservation) without holding the
release_mutex lock. Fixes lockdep (correctly) warning on a possible
deadlock.
Fixes:
65ffea3c6e73 ("drm/qxl: unpin release objects")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-5-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:05 +0000 (13:32 +0100)]
drm/qxl: use ttm bo priorities
Allow to set priorities for buffer objects. Use priority 1 for surface
and cursor command releases. Use priority 0 for drawing command
releases. That way the short-living drawing commands are first in line
when it comes to eviction, making it *much* less likely that
ttm_bo_mem_force_space() picks something which can't be evicted and
throws an error after waiting a while without success.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-4-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:04 +0000 (13:32 +0100)]
drm/qxl: more fence wait rework
Move qxl_io_notify_oom() call into wait condition.
That way the driver will call it again if one call
wasn't enough.
Also allows to remove the extra dma_fence_is_signaled()
check and the goto.
Fixes:
5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-3-kraxel@redhat.com
Gerd Hoffmann [Wed, 17 Feb 2021 12:32:03 +0000 (13:32 +0100)]
drm/qxl: properly handle device init failures
Specifically do not try release resources which where
not allocated in the first place.
Cc: Tong Zhang <ztong0001@gmail.com>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-2-kraxel@redhat.com
Dario Binacchi [Tue, 16 Feb 2021 20:22:25 +0000 (21:22 +0100)]
drm/tilcdc: fix raster control register setting
The fdd property of the tilcdc_panel_info structure must set the reqdly
bit field (bit 12 to 19) of the raster control register. The previous
statement set the least significant bit instead.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216202225.12861-1-dariobin@libero.it
Tian Tao [Mon, 8 Feb 2021 02:32:56 +0000 (10:32 +0800)]
drm/tilcdc: replace spin_lock_irqsave by spin_lock in hard IRQ
The code has been in a irq-disabled context since it is hard IRQ. There
is no necessity to do it again.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/1612751576-42512-1-git-send-email-tiantao6@hisilicon.com
Imre Deak [Tue, 16 Feb 2021 12:34:48 +0000 (14:34 +0200)]
drm/dp_mst: Tune down the WARN modesetting a port with full_pbn=0
It's possible to modeset a connector/mst port that has a 0 full_pbn
value: if the sink on the port deasserts its HPD and a branch device
reports this via a CSN with the port's ddps=0 and pdt!=NONE the driver
clears full_pbn, but the corresponding connector can be still
modesetted.
This happened on a DELL U2719D monitor as the branch device and an LG
27UL650-W daisy-chained to it, the LG monitor generating a long HPD
pulse (doing this for some reason always when waking up from some power
saving state).
Tune down the WARN about this scenario to a debug message.
v2: Use the correct atomic debug message level. (Lyude)
References: https://gitlab.freedesktop.org/drm/intel/-/issues/1917
Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216123448.410545-1-imre.deak@intel.com
Sebastian Andrzej Siewior [Mon, 8 Feb 2021 22:38:10 +0000 (23:38 +0100)]
video: fbdev: amba-clcd: Always use msleep() for waiting
The driver uses in_atomic() to distinguish between mdelay() and msleep().
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
I traced the usage of in_interrupt() back to its initial merge:
bfe694f833643 ("[ARM] Add ARM AMBA CLCD framebuffer driver.")
https://git.kernel.org/history/history/c/
bfe694f833643
The driver has been removed and added back in the meantime.
I've been looking for the IRQ context as described in the comment and
couldn't find it. The functions calling clcdfb_sleep() also call
conditionally backlight_update_status() which acquires a mutex. If it is
okay to acquire a mutex then it is okay to use msleep() since both
functions must be used in preemptible context.
Replace clcdfb_sleep() with msleep().
Cc: Peter Collingbourne <pcc@google.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-4-bigeasy@linutronix.de
Ahmed S. Darwish [Mon, 8 Feb 2021 22:38:09 +0000 (23:38 +0100)]
video: omapfb: Remove WARN_ON(in_interrupt()).
dsi_sync_vc() uses in_interrupt() to create a warning if the function is
used in non-preemptible context.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The wait_for_completion() function (used in dsi_sync_vc_vp() and
dsi_sync_vc_l4() has already a check if it is invoked from proper
context.
Remove WARN_ON(in_interrupt()) from the driver.
Cc: linux-omap@vger.kernel.org
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-3-bigeasy@linutronix.de
Ahmed S. Darwish [Mon, 8 Feb 2021 22:38:08 +0000 (23:38 +0100)]
video: omap: Remove in_interrupt() usage.
alloc_req() uses in_interrupt() to detect if it is safe to use down().
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The semaphore is used as a counting semaphore, initialized with the
number of slots in the request pool minus IRQ_REQ_POOL_SIZE - which are
reserved for the in_interrupt() user to ensure that a request is always
available. The preemptible user will block on the semphore waiting for a
request to become available in case there are no requests available.
Replace in_interrupt() with a `can_sleep' argument to indicate if it is
safe to block on the sempahore.
Cc: linux-omap@vger.kernel.org
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-2-bigeasy@linutronix.de
Sakari Ailus [Tue, 16 Feb 2021 15:57:22 +0000 (17:57 +0200)]
drm: Switch to %p4cc format modifier
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a
large number of temporary variables at the same time.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
Sakari Ailus [Tue, 16 Feb 2021 15:57:21 +0000 (17:57 +0200)]
v4l: ioctl: Use %p4cc printk modifier to print FourCC codes
Now that we can print FourCC codes directly using printk, make use of the
feature in V4L2 core.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-3-sakari.ailus@linux.intel.com
Sakari Ailus [Tue, 16 Feb 2021 15:57:20 +0000 (17:57 +0200)]
lib/vsprintf: Add support for printing V4L2 and DRM fourccs
Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM
pixel formats denoted by fourccs. The fourcc encoding is the same for both
so the same implementation can be used.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-2-sakari.ailus@linux.intel.com
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:32 +0000 (14:46 +0100)]
drm/ast: Move all of the cursor-update functionality to atomic_update
We used to update the cursor image in prepare_fb. Move all this code to
atomic_update (where it belongs). The generic helper for shadow-buffered
planes now implement the cursor plane's prepare_fb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-11-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:31 +0000 (14:46 +0100)]
drm/ast: Store each HW cursor offset after pinning the rsp BO
As HW cursor BOs never move, we can store the offset in VRAM in the
cursor-plane's HWC state. This removes the last possible source of
runtime errors from atomic_update.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:30 +0000 (14:46 +0100)]
drm/ast: Map HW cursor BOs permanently
The BOs of the hardware cursor are now mapped permanently while the
cursor plane is being used. This reduces the CPU overhead of the cursor
plane's atomic_update function.
The change also resolves a problem with the vmap call in the commit tail.
The vmap implementation could acquire the DMA reservation lock on the
BO, which is not allowed that late in the atomic update. Removing the
vmap call from atomic_update fixes the issue.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:29 +0000 (14:46 +0100)]
drm/ast: Store cursor BOs in cursor plane
The cursor uses two BOs in video RAM to implement double buffering. Store
both in struct ast_cursor_plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-8-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:28 +0000 (14:46 +0100)]
drm/ast: Add cursor-plane data structure
Cursor state is currently located throughout struct ast_private. Having
struct ast_cursor_plane as dedicated data structure for cursors helps to
organize the modesetting code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-7-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:27 +0000 (14:46 +0100)]
drm/ast: Inline ast cursor-update functions into modesetting code
The logic for cursor updates is now located in the cursor plane's
modesetting code. A number of helper functions remain to modify the
rsp registers and image.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-6-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:26 +0000 (14:46 +0100)]
drm/ast: Allocate HW cursor BOs during cursor-plane initialization
The BOs are eventually released by the cursor plane's destroy callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-5-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:25 +0000 (14:46 +0100)]
drm/ast: Initialize planes in helper functions
This change will help with inlining cursor functions into modesetting
code. The primary plane's field used to be cleared with memset(). This
has been dropped as the memory is always allocated with kzalloc().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-4-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:24 +0000 (14:46 +0100)]
drm/ast: Fix invalid usage of AST_MAX_HWC_WIDTH in cursor atomic_check
Use AST_MAX_HWC_HEIGHT for setting offset_y in the cursor plane's
atomic_check. The code used AST_MAX_HWC_WIDTH instead. This worked
because both constants has the same value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-3-tzimmermann@suse.de
Thomas Zimmermann [Tue, 9 Feb 2021 13:46:23 +0000 (14:46 +0100)]
drm/ast: Add constants for VGACRCB register bits
Set the bits in VGACRCB with constants. Alo move the rsp code into a
helper function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-2-tzimmermann@suse.de
Marek Vasut [Wed, 27 Jan 2021 11:07:56 +0000 (12:07 +0100)]
drm/stm: Fix bus_flags handling
The drm_display_mode_to_videomode() does not populate DISPLAY_FLAGS_DE_LOW
or DISPLAY_FLAGS_PIXDATA_NEGEDGE flags in struct videomode. Therefore, no
matter what polarity the next bridge or display might require, these flags
are never set, and thus the LTDC GCR_DEPOL and GCR_PCPOL bits are never set
and the LTDC behaves as if both DISPLAY_FLAGS_PIXDATA_POSEDGE and
DISPLAY_FLAGS_DE_HIGH were always set.
The fix for this problem is taken almost verbatim from MXSFB driver. In
case there is a bridge attached to the LTDC, the bridge might have extra
polarity requirements, so extract bus_flags from the bridge and use them
for LTDC configuration. Otherwise, extract bus_flags from the connector,
which is the display.
Fixes:
b759012c5fa7 ("drm/stm: Add STM32 LTDC driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Antonio Borneo <antonio.borneo@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: dri-devel@lists.freedesktop.org
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127110756.125570-1-marex@denx.de
Boris Brezillon [Fri, 5 Feb 2021 11:17:57 +0000 (12:17 +0100)]
drm/panfrost: Stay in the threaded MMU IRQ handler until we've handled all IRQs
Doing a hw-irq -> threaded-irq round-trip is counter-productive, stay
in the threaded irq handler as long as we can.
v2:
* Rework the loop to avoid a goto
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-4-boris.brezillon@collabora.com
Boris Brezillon [Fri, 5 Feb 2021 11:17:56 +0000 (12:17 +0100)]
drm/panfrost: Don't try to map pages that are already mapped
We allocate 2MB chunks at a time, so it might appear that a page fault
has already been handled by a previous page fault when we reach
panfrost_mmu_map_fault_addr(). Bail out in that case to avoid mapping the
same area twice.
Cc: <stable@vger.kernel.org>
Fixes:
187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-3-boris.brezillon@collabora.com
Boris Brezillon [Fri, 5 Feb 2021 11:17:55 +0000 (12:17 +0100)]
drm/panfrost: Clear MMU irqs before handling the fault
When a fault is handled it will unblock the GPU which will continue
executing its shader and might fault almost immediately on a different
page. If we clear interrupts after handling the fault we might miss new
faults, so clear them before.
Cc: <stable@vger.kernel.org>
Fixes:
187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205111757.585248-2-boris.brezillon@collabora.com
Christian König [Thu, 11 Feb 2021 10:04:23 +0000 (11:04 +0100)]
drm/vram-helper: cleanup drm_gem_vram_bo_driver_move_notify
Swapping bo->mem was completely unecessary. Cleanup the function which
is just a leftover from a TTM cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210211131659.276275-1-christian.koenig@amd.com
projects / platform / kernel / linux-rpi.git / log