Eizan Miyamoto [Thu, 7 May 2020 10:23:48 +0000 (12:23 +0200)]
media: mtk-mdp: convert mtk_mdp_dev.comp array to list
The functions mtk_mdp_register/unregister_component have been created to
add / remove items from the list of components.
This will eventually enable us to specify a list of components in the
device tree instead of hardcoding them into this driver.
The list is modified by a single thread at driver probe time, and will
not be traversed by another thread until the call to pm_runtime_enable
at the end of probing.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eizan Miyamoto [Thu, 7 May 2020 10:23:46 +0000 (12:23 +0200)]
media: mtk-mdp: handle vpu_wdt_reg_handler() errors during probe
This is a cleanup to better handle errors during MDP probe.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eizan Miyamoto [Thu, 7 May 2020 10:23:44 +0000 (12:23 +0200)]
media: mtk-mdp: handle vb2_dma_contig_set_max_seg_size errors during probe
This is a cleanup to better handle errors during MDP probe.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eizan Miyamoto [Thu, 7 May 2020 10:23:42 +0000 (12:23 +0200)]
media: mtk-mdp: remove mtk_mdp_comp.regs from mtk_mdp_comp.h
These fields are not used and can be removed.
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Francois Buergisser [Wed, 6 May 2020 05:01:37 +0000 (07:01 +0200)]
media: mtk-mdp: Remove states for format checks
The mtk-mdp driver uses states to check if the formats have been set
on the capture and output when turning the streaming on, setting
controls or setting the selection rectangles.
Those states are reset when 0 buffers are requested like when checking
capabilities.
This patch removes all format checks and set one by default as queues in
V4L2 are expected to always have a format set.
https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-streamon.html
https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-g-ctrl.html
https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/vidioc-g-selection.html
Signed-off-by: Francois Buergisser <fbuergisser@chromium.org>
Signed-off-by: Eizan Miyamoto <eizan@chromium.org>
Reviewed-by: Enric Balletbo I Serra <enric.balletbo@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dan Carpenter [Fri, 8 May 2020 14:40:22 +0000 (16:40 +0200)]
media: firewire: Using uninitialized values in node_probe()
If fw_csr_string() returns -ENOENT, then "name" is uninitialized. So
then the "strlen(model_names[i]) <= name_len" is true because strlen()
is unsigned and -ENOENT is type promoted to a very high positive value.
Then the "strncmp(name, model_names[i], name_len)" uses uninitialized
data because "name" is uninitialized.
Fixes:
92374e886c75 ("[media] firedtv: drop obsolete backend abstraction")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chen Zhou [Sat, 9 May 2020 02:07:11 +0000 (04:07 +0200)]
media: coda: jpeg: add NULL check after kmalloc
Fixes coccicheck warning:
./drivers/media/platform/coda/coda-jpeg.c:331:3-31:
alloc with no test, possible model on line 354
Add NULL check after kmalloc.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Eugen Hristev [Fri, 12 Jun 2020 10:56:02 +0000 (12:56 +0200)]
media: atmel: atmel-sama5d2-isc: fix warning in configs without OF
All warnings (new ones prefixed by >>, old ones prefixed by <<):
>> drivers/media/platform/atmel/atmel-sama5d2-isc.c:323:34: warning: unused variable 'atmel_isc_of_match' [-Wunused-const-variable]
static const struct of_device_id atmel_isc_of_match[] = {
^
1 warning generated.
vim +/atmel_isc_of_match +323 drivers/media/platform/atmel/atmel-sama5d2-isc.c
322
> 323 static const struct of_device_id atmel_isc_of_match[] = {
324 { .compatible = "atmel,sama5d2-isc" },
325 { }
326 };
327 MODULE_DEVICE_TABLE(of, atmel_isc_of_match);
328
Fixed warning by guarding the atmel_isc_of_match by CONFIG_OF.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Gustavo A. R. Silva [Thu, 19 Mar 2020 22:23:52 +0000 (23:23 +0100)]
media: usb: pwc: pwc.h: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Thu, 9 Apr 2020 11:24:04 +0000 (13:24 +0200)]
media: camss: use proper media entity function for subdevices
Currently for msm_csiphy, msm_csid, and msm_ispif subdevices the media
entity function field is set to MEDIA_ENT_F_IO_V4L. This is incorrect
as MEDIA_ENT_F_IO_V4L implies V4L2 video node.
Change it to MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER as this is the best
fit from the functions defined in include/uapi/linux/media.h.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Tested-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Fri, 15 May 2020 14:29:52 +0000 (16:29 +0200)]
media: staging: rkisp1: cap: remove support of BGR666 format
The rkisp1 supports RGB encoding with 6 bits per
color with the following format:
- - b5 b4 b3 b2 b1 b0 - - g5 g4 g3 g2 g1 g0 - - r5 r4 r3 r2 r1 r0 - - - - - - - -
This is not how V4L2_PIX_FMT_BGR666 is defined, so remove
this format from the driver's formats list.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tuomas Tynkkynen [Sun, 21 Jun 2020 11:30:40 +0000 (13:30 +0200)]
media: media-request: Fix crash if memory allocation fails
Syzbot reports a NULL-ptr deref in the kref_put() call:
BUG: KASAN: null-ptr-deref in media_request_put drivers/media/mc/mc-request.c:81 [inline]
kref_put include/linux/kref.h:64 [inline]
media_request_put drivers/media/mc/mc-request.c:81 [inline]
media_request_close+0x4d/0x170 drivers/media/mc/mc-request.c:89
__fput+0x2ed/0x750 fs/file_table.c:281
task_work_run+0x147/0x1d0 kernel/task_work.c:123
tracehook_notify_resume include/linux/tracehook.h:188 [inline]
exit_to_usermode_loop arch/x86/entry/common.c:165 [inline]
prepare_exit_to_usermode+0x48e/0x600 arch/x86/entry/common.c:196
What led to this crash was an injected memory allocation failure in
media_request_alloc():
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
should_failslab+0x5/0x20
kmem_cache_alloc_trace+0x57/0x300
? anon_inode_getfile+0xe5/0x170
media_request_alloc+0x339/0x440
media_device_request_alloc+0x94/0xc0
media_device_ioctl+0x1fb/0x330
? do_vfs_ioctl+0x6ea/0x1a00
? media_ioctl+0x101/0x120
? __media_device_usb_init+0x430/0x430
? media_poll+0x110/0x110
__se_sys_ioctl+0xf9/0x160
do_syscall_64+0xf3/0x1b0
When that allocation fails, filp->private_data is left uninitialized
which media_request_close() does not expect and crashes.
To avoid this, reorder media_request_alloc() such that
allocating the struct file happens as the last step thus
media_request_close() will no longer get called for a partially created
media request.
Reported-by: syzbot+6bed2d543cf7e48b822b@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Fixes:
10905d70d788 ("media: media-request: implement media requests")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Qingwu Zhang [Fri, 12 Jun 2020 09:42:02 +0000 (11:42 +0200)]
media: ov2740: add NVMEM interface to read customized OTP data
ov2740 includes 512bytes of one-time programmable memory and
256 bytes are reserved for customers which can be used to store
customized information. This patch provide an NVMEM interface
to support read out the customized data in OTP.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Qingwu Zhang <qingwu.zhang@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Fri, 12 Jun 2020 13:53:55 +0000 (15:53 +0200)]
media: i2c: imx290: set bus_type before calling v4l2_fwnode_endpoint_alloc_parse()
The bus_type field of v4l2_fwnode_endpoint structure passed as the argument
to v4l2_fwnode_endpoint_alloc_parse() function must be initiaized.
Set it to V4L2_MBUS_CSI2_DPHY, and check for -ENXIO which is returned
when the requested media bus type doesn't match the fwnode.
Also remove v4l2_fwnode_endpoint field from struct imx290 as it is only
needed in the probe function: use the local variable for this purpose.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:54 +0000 (15:53 +0200)]
media: i2c: imx290: Move the settle time delay out of loop
The 10ms settle time is needed only at the end of all consecutive
register writes. So move the delay to outside of the for loop of
imx290_set_register_array().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:53 +0000 (15:53 +0200)]
media: i2c: imx290: Add support to enumerate all frame sizes
Add support to enumerate all frame sizes supported by IMX290. This is
required for using with userspace tools such as libcamera.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:52 +0000 (15:53 +0200)]
media: i2c: imx290: Add RAW12 mode support
IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and
12 bit formats. Since the driver already supports RAW10 mode, let's add
the missing RAW12 mode as well.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:51 +0000 (15:53 +0200)]
media: i2c: imx290: Add support for test pattern generation
Add support for generating following test patterns by IMX290:
* Sequence Pattern 1
* Horizontal Color-bar Chart
* Vertical Color-bar Chart
* Sequence Pattern 2
* Gradation Pattern 1
* Gradation Pattern 2
* 000/555h Toggle Pattern
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:50 +0000 (15:53 +0200)]
media: i2c: imx290: Add configurable link frequency and pixel rate
IMX290 operates with multiple link frequency and pixel rate combinations.
The initial driver used a single setting for both but since we now have
the lane count support in place, let's add configurable link frequency
and pixel rate.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Manivannan Sadhasivam [Fri, 12 Jun 2020 13:53:49 +0000 (15:53 +0200)]
media: i2c: imx290: Add support for 2 data lanes
The IMX290 sensor can output frames with 2/4 CSI2 data lanes. This commit
adds support for 2 lane mode in addition to the 4 lane and also
configuring the data lane settings in the driver based on system
configuration.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Fri, 12 Jun 2020 13:53:48 +0000 (15:53 +0200)]
media: i2c: imx290: fix reset GPIO pin handling
According to https://www.kernel.org/doc/Documentation/gpio/consumer.txt,
- all of the gpiod_set_value_xxx() functions operate with the *logical*
value. So in imx290_power_on() the reset signal should be cleared
(de-asserted) with gpiod_set_value_cansleep(imx290->rst_gpio, 0), and in
imx290_power_off() the value of 1 must be used to apply/assert the reset
to the sensor. In the device tree the reset pin is described as
GPIO_ACTIVE_LOW, and gpiod_set_value_xxx() functions take this into
account,
- when devm_gpiod_get_optional() is called with GPIOD_ASIS, the GPIO is
not initialized, and the direction must be set later; using a GPIO
without setting its direction first is illegal and will result in undefined
behavior. Fix this by using GPIOD_OUT_HIGH instead of GPIOD_ASIS (this
asserts the reset signal to the sensor initially).
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Fri, 12 Jun 2020 13:53:47 +0000 (15:53 +0200)]
media: i2c: imx290: fix the order of the args in SET_RUNTIME_PM_OPS()
The macro is defined as SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn),
so imx290_power_off must be the 1st arg, and imx290_power_on the 2nd.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Andrey Konovalov [Fri, 12 Jun 2020 13:53:46 +0000 (15:53 +0200)]
media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
With the current driver 'media-ctl -p' issued right after the imx290 driver
is loaded prints:
pad0: Source
[fmt:unknown/0x0]
The format value of zero is due to the current_format field of the imx290
struct not being initialized yet.
As imx290_entity_init_cfg() calls imx290_set_fmt(), the current_mode field
is also initialized, so the line which set current_mode to a default value
in driver's probe() function is no longer needed.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chuhong Yuan [Wed, 3 Jun 2020 16:41:22 +0000 (18:41 +0200)]
media: omap3isp: Add missed v4l2_ctrl_handler_free() for preview_init_entities()
preview_init_entities() does not call v4l2_ctrl_handler_free() when
it fails.
Add the missed function to fix it.
Fixes:
de1135d44f4f ("[media] omap3isp: CCDC, preview engine and resizer")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chuhong Yuan [Wed, 3 Jun 2020 16:40:48 +0000 (18:40 +0200)]
media: marvell-ccic: Add missed v4l2_async_notifier_cleanup()
mccic_register() forgets to cleanup the notifier in its error handler.
mccic_shutdown() also misses calling v4l2_async_notifier_cleanup().
Add the missed calls to fix them.
Fixes:
3eefe36cc00c ("media: marvell-ccic: use async notifier to get the sensor")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Bingbu Cao [Thu, 4 Jun 2020 01:25:19 +0000 (03:25 +0200)]
media: ov2740: make ov2740 driver only work with ACPI
As the ACPI id of ov2740 camera sensor was registered as "INT3474",
current ov2740 driver is supposed to be working with ACPI only.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sakari Ailus [Wed, 16 Oct 2019 11:19:30 +0000 (13:19 +0200)]
media: smiapp: Use pm_runtime_get_if_active
Use the convenience function pm_runtime_get_if_active() instead of a
number of calls to runtime PM to figure out if the device was already
powered up.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Mon, 25 May 2020 08:19:58 +0000 (10:19 +0200)]
media: smiapp: Fix runtime PM imbalance on error
When v4l2_async_register_subdev_sensor_common() returns
an error code, a pairing runtime PM usage counter
decrement is needed to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Sat, 20 Jun 2020 10:16:41 +0000 (12:16 +0200)]
media: media/cec.h: document cec_adapter fields
Document this core CEC structure.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Sat, 20 Jun 2020 10:16:40 +0000 (12:16 +0200)]
media: cec: remove unused waitq and phys_addrs fields
The cec_adapter struct contained a waitq field that isn't used
anywhere, so drop this.
It also contained a phys_addrs array to store any reported physical
addresses. However, this was never actually used, so this field is
removed as well. The original idea was to let the core keep track of
this information, but nothing was ever done with this. Should this
be needed in the future then it is easy enough to resurrect this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Sat, 20 Jun 2020 09:33:01 +0000 (11:33 +0200)]
media: cec-ioc-adap-g-caps.rst: document available_log_addrs
The CEC_ADAP_G_CAPS documentation of the cec_caps struct was missing
the available_log_addrs field. Add this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Chuhong Yuan [Fri, 5 Jun 2020 16:17:28 +0000 (18:17 +0200)]
media: budget-core: Improve exception handling in budget_register()
budget_register() has no error handling after its failure.
Add the missed undo functions for error handling to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jia-Ju Bai [Sat, 30 May 2020 14:42:08 +0000 (16:42 +0200)]
media: pci: ttpci: av7110: fix possible buffer overflow caused by bad DMA value in debiirq()
The value av7110->debi_virt is stored in DMA memory, and it is assigned
to data, and thus data[0] can be modified at any time by malicious
hardware. In this case, "if (data[0] < 2)" can be passed, but then
data[0] can be changed into a large number, which may cause buffer
overflow when the code "av7110->ci_slot[data[0]]" is used.
To fix this possible bug, data[0] is assigned to a local variable, which
replaces the use of data[0].
Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Jan Pieter van Woerkom [Wed, 3 Jun 2020 03:58:40 +0000 (05:58 +0200)]
media: dvbsky: MyGica T230* receivers also do DVB-C and DVB-T
MyGica T230* receivers also do DVB-C and DVB-T: change their names.
Signed-off-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Arnd Bergmann [Thu, 7 May 2020 21:33:14 +0000 (23:33 +0200)]
media: cxusb-analog: fix V4L2 dependency
CONFIG_DVB_USB_CXUSB_ANALOG is a 'bool' symbol with a dependency on the
tristate CONFIG_VIDEO_V4L2, which means it can be enabled as =y even
when its dependency is =m. This leads to a link failure:
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_analog_init':
cxusb-analog.c:(.text+0x92): undefined reference to `v4l2_subdev_call_wrappers'
drivers/media/usb/dvb-usb/cxusb-analog.o: In function `cxusb_medion_register_analog':
cxusb-analog.c:(.text+0x466): undefined reference to `v4l2_device_register'
cxusb-analog.c:(.text+0x4c3): undefined reference to `v4l2_i2c_new_subdev'
cxusb-analog.c:(.text+0x4fb): undefined reference to `v4l2_subdev_call_wrappers'
...
Change the dependency only disallow the analog portion of the driver
in that configuration.
Fixes:
e478d4054054 ("media: cxusb: add analog mode support for Medion MD95700")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 27 May 2020 09:27:48 +0000 (11:27 +0200)]
media: MAINTAINERS: rc-core and lirc maintainership
This has been maintained for some time, update MAINTAINERS to reflect.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Wed, 27 May 2020 09:22:16 +0000 (11:22 +0200)]
media: USB: cdc-acm: blacklist IR Droid / IR Toy device
The IR Droid / IR Toy device used custom protocol over serial
line, so it is presenting itself as CDC ACM device.
Now that we have proper in-kernel driver for it we need to black-list the
device in cdc-acm driver.
http://dangerousprototypes.com/docs/USB_Infrared_Toy
https://www.irdroid.com/irdroid-usb-ir-transceiver/
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sean Young [Sun, 3 May 2020 09:27:55 +0000 (11:27 +0200)]
media: rc: add support for Infrared Toy and IR Droid devices
http://dangerousprototypes.com/docs/USB_Infrared_Toy
https://www.irdroid.com/irdroid-usb-ir-transceiver/
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Mauro Carvalho Chehab [Tue, 23 Jun 2020 12:03:58 +0000 (14:03 +0200)]
media: dev-encoder.rst: add GFDL-1-1+ to SPDX header
The media documents under the uAPI should be GFDL compatible.
So, make this one dual-licensed GPL-2.0 or GFDL-1.1+ with
no-invariant sections.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 26 May 2020 09:00:51 +0000 (11:00 +0200)]
media: dev-encoder.rst: add reference to V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL
Setting the stateful encoder capture frame interval is only supported
if this flag is set. Document this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 26 May 2020 08:59:53 +0000 (10:59 +0200)]
media: videodev2.h: add V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL flag
Add the V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL flag to signal that
the coded frame interval can be set separately from the raw frame
interval for stateful encoders.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Tue, 26 May 2020 08:40:01 +0000 (10:40 +0200)]
media: dev-decoder.rst: small fixes
Add missing periods at the end of two sentences.
Although mandatory -> Although not mandatory
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Wed, 20 May 2020 09:42:23 +0000 (11:42 +0200)]
media: vidioc-g-parm.rst: update the VIDIOC_G/S_PARM documentation
This documentation is very outdated. In particular, it is
not obvious at all that this is used to change the framerate of
sensors.
Fix it, and include references to the stateful encoder API where
this works slightly different.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tomasz Figa [Tue, 19 Nov 2019 11:34:57 +0000 (12:34 +0100)]
media: docs-rst: Document memory-to-memory video encoder interface
Due to complexity of the video encoding process, the V4L2 drivers of
stateful encoder hardware require specific sequences of V4L2 API calls
to be followed. These include capability enumeration, initialization,
encoding, encode parameters change, drain and reset.
Specifics of the above have been discussed during Media Workshops at
LinuxCon Europe 2012 in Barcelona and then later Embedded Linux
Conference Europe 2014 in Düsseldorf. The de facto Codec API that
originated at those events was later implemented by the drivers we already
have merged in mainline, such as s5p-mfc or coda.
The only thing missing was the real specification included as a part of
Linux Media documentation. Fix it now and document the encoder part of
the Codec API.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:53 +0000 (18:01 +0200)]
media: vivid: add cache_hints module param
Add a cache_hints module param to control per-queue user space cache
hints support.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:52 +0000 (18:01 +0200)]
media: videobuf2: remove redundant if-statement
That if-statement seems to be unneeded.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:51 +0000 (18:01 +0200)]
media: videobuf2: don't test db_attach in dma-contig prepare and finish
We moved cache management decision making to the upper layer and
rely on buffer's need_cache_sync flags and videobuf2 core. If the
upper layer (core) has decided to invoke ->prepare() or ->finish()
then we must sync.
For DMABUF ->need_cache_sync_on_prepare and ->need_cache_sync_on_flush
are always false so videobuf core does not call ->prepare() and
->finish() on such buffers.
Additionally, scratch the DMABUF comment.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:50 +0000 (18:01 +0200)]
media: videobuf2: add begin/end cpu_access callbacks to dma-sg
Provide begin_cpu_access() and end_cpu_access() dma_buf_ops
callbacks for cache synchronisation on exported buffers.
V4L2_FLAG_MEMORY_NON_CONSISTENT has no effect on dma-sg buffers.
dma-sg allocates memory using the page allocator directly, so
there is no memory consistency guarantee.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:49 +0000 (18:01 +0200)]
media: videobuf2: add begin/end cpu_access callbacks to dma-contig
Provide begin_cpu_access() and end_cpu_access() callbacks for
cache synchronisation on exported buffers.
The patch also adds a new helper function - vb2_dc_buffer_consistent(),
which returns true is if the buffer is consistent (DMA_ATTR_NON_CONSISTENT
bit cleared), so then we don't need to sync anything.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:48 +0000 (18:01 +0200)]
media: videobuf2: check ->synced flag in prepare() and finish()
This simplifies the code a tiny bit and let's us to avoid
unneeded ->prepare()/->finish() calls.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:47 +0000 (18:01 +0200)]
media: videobuf2: do not sync caches when we are allowed not to
Skip ->prepare() or/and ->finish() cache synchronisation if
user-space requested us to do so (or when queue dma direction
permits us to skip cache syncs).
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:46 +0000 (18:01 +0200)]
media: videobuf2: factor out planes prepare/finish functions
Factor out the code, no functional changes.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:45 +0000 (18:01 +0200)]
media: videobuf2: handle V4L2_FLAG_MEMORY_NON_CONSISTENT flag
This patch lets user-space to request a non-consistent memory
allocation during CREATE_BUFS and REQBUFS ioctl calls.
= CREATE_BUFS
struct v4l2_create_buffers has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= CREATE_BUFS32
struct v4l2_create_buffers32 has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= REQBUFS
We use one bit of a ->reserved[1] member of struct v4l2_requestbuffers,
which is now renamed to ->flags. Unlike v4l2_create_buffers, struct
v4l2_requestbuffers does not have enough reserved room. Therefore for
backward compatibility ->reserved and ->flags were put into anonymous
union.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:44 +0000 (18:01 +0200)]
media: videobuf2: add queue memory consistency parameter
Preparations for future V4L2_FLAG_MEMORY_NON_CONSISTENT support.
Extend vb2_core_reqbufs() parameters list to accept requests'
->flags, which will be used for memory consistency configuration.
An attempt to allocate a buffer with consistency requirements
which don't match queue's consistency model will fail.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:43 +0000 (18:01 +0200)]
media: videobuf2: add V4L2_FLAG_MEMORY_NON_CONSISTENT flag
By setting or clearing V4L2_FLAG_MEMORY_NON_CONSISTENT flag
user-space should be able to set or clear queue's NON_CONSISTENT
->dma_attrs. Queue's ->dma_attrs are passed to the underlying
allocator in __vb2_buf_mem_alloc(), so thus user-space is able
to request vb2 buffer's memory to be either consistent (coherent)
or non-consistent.
The patch set also adds a corresponding capability flag:
fill_buf_caps() reports V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
when queue supports user-space cache management hints. Note,
however, that MMAP_CACHE_HINTS capability only valid when the
queue is used for memory MMAP-ed streaming I/O.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:42 +0000 (18:01 +0200)]
media: videobuf2: handle V4L2 buffer cache flags
Set video buffer cache management flags corresponding to V4L2 cache
flags.
Both ->prepare() and ->finish() cache management hints should be
passed during this stage (buffer preparation), because there is
no other way for user-space to tell V4L2 to avoid ->finish() cache
flush.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:41 +0000 (18:01 +0200)]
media: videobuf2: add cache management members
Extend vb2_buffer and vb2_queue structs with cache management
members.
V4L2 UAPI already contains two buffer flags which user-space,
supposedly, can use to control buffer cache sync:
- V4L2_BUF_FLAG_NO_CACHE_INVALIDATE
- V4L2_BUF_FLAG_NO_CACHE_CLEAN
None of these, however, do anything at the moment. This patch
set is intended to change it.
Since user-space cache management hints are supposed to be
implemented on a per-buffer basis we need to extend vb2_buffer
struct with two new members ->need_cache_sync_on_prepare and
->need_cache_sync_on_finish, which will store corresponding
user-space hints.
In order to preserve the existing behaviour, user-space cache
managements flags will be handled only by those drivers that
permit user-space cache hints. That's the purpose of vb2_queue
->allow_cache_hints member. Driver must set ->allow_cache_hints
during queue initialisation to enable cache management hints
mechanism.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sergey Senozhatsky [Thu, 14 May 2020 16:01:40 +0000 (18:01 +0200)]
media: videobuf2: use explicit unsigned int in vb2_queue
Switch from 'unsigned' to 'unsigned int' so that checkpatch doesn't
complain.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Niklas Söderlund [Fri, 22 May 2020 00:50:07 +0000 (02:50 +0200)]
media: doc-rst: Fix typos in packed Bayer raw14 pixel formats diagram
There are two typos in the byte order diagram. On row 1 and 3 the low
bits for the 3rd pixel B02 and B22 are labeled as R02 and R22. On row 2
the row index is 0 for all pixels where it should be 1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Colin Ian King [Sun, 24 May 2020 16:25:03 +0000 (18:25 +0200)]
media: gspca: remove redundant assignment to variable retval
The variable retval is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Sat, 23 May 2020 11:49:17 +0000 (13:49 +0200)]
media: vpif: Fix runtime PM imbalance in vpif_probe
When platform_get_resource() returns an error code, a
pairing runtime PM usage counter decrement is needed
to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Sun, 24 May 2020 02:59:02 +0000 (04:59 +0200)]
media: exynos4-is: Fix runtime PM imbalance in fimc_is_probe
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced. For all error
paths after pm_runtime_get_sync(), things are the same.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Sun, 24 May 2020 03:34:04 +0000 (05:34 +0200)]
media: exynos4-is: Fix runtime PM imbalance in isp_video_open
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Thu, 21 May 2020 11:56:07 +0000 (13:56 +0200)]
media: camss: vfe: Fix runtime PM imbalance on error
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Thu, 21 May 2020 12:06:21 +0000 (14:06 +0200)]
media: camss: ispif: Fix runtime PM imbalance on error
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Sat, 23 May 2020 07:36:39 +0000 (09:36 +0200)]
media: camss: csid: Fix runtime PM imbalance in csid_set_power
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Thu, 21 May 2020 10:17:35 +0000 (12:17 +0200)]
media: coda: Fix runtime PM imbalance on error
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Thu, 21 May 2020 10:22:04 +0000 (12:22 +0200)]
media: fimc-capture: Fix runtime PM imbalance on error
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Thu, 21 May 2020 11:07:47 +0000 (13:07 +0200)]
media: s5k6a3: Fix runtime PM imbalance on error
pm_runtime_get() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dinghao Liu [Thu, 21 May 2020 06:27:45 +0000 (08:27 +0200)]
media: staging: tegra-vde: fix runtime pm imbalance on error
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Fri, 22 May 2020 11:56:33 +0000 (13:56 +0200)]
media: staging: rkisp1: fix dev param for dev_* debugs
In some debug prints a wrong 'dev' argument is used
for the dev_(dbg/err/warn), this cause a prefix
"(NULL device *)" to the prints.
In some prints the 'dev' of the sensor subdevice is used
which is also wrong.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[hverkuil-cisco@xs4all.nl: s/in subdev/in sensor subdev/ as per Laurent's comment]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Sat, 9 May 2020 15:29:04 +0000 (17:29 +0200)]
media: staging: rkisp1: stats: don't set stats flags in rkisp1_stats_send_measurement
The flags that indicate which statistics are read are already
set in the functions that read them so there is no need to
set them in the function rkisp1_stats_send_measurement.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Dafna Hirschfeld [Sat, 9 May 2020 15:29:03 +0000 (17:29 +0200)]
media: staging: rkisp1 stats: set a measure flag with '|=' instead of '='
The flag RKISP1_CIF_ISP_STAT_AFM_FIN that indicates a type of
statistics is mistakenly set with '=' instead of '|='
this might set off previous flags.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Vishal Sagar [Wed, 27 May 2020 13:57:19 +0000 (15:57 +0200)]
media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem driver
The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to capture images
from MIPI CSI-2 camera sensors and output AXI4-Stream video data ready
for image processing. Please refer to PG232 for details.
The CSI2 Rx controller filters out all packets except for the packets
with data type fixed in hardware. RAW8 packets are always allowed to
pass through.
It is also used to setup and handle interrupts and enable the core. It
logs all the events in respective counters between streaming on and off.
The driver supports only the video format bridge enabled configuration.
Some data types like YUV 422 10bpc, RAW16, RAW20 are supported when the
CSI v2.0 feature is enabled in design. When the VCX feature is enabled,
the maximum number of virtual channels becomes 16 from 4.
Signed-off-by: Vishal Sagar <vishal.sagar@xilinx.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Vishal Sagar [Wed, 27 May 2020 13:57:18 +0000 (15:57 +0200)]
media: dt-bindings: media: xilinx: Add Xilinx MIPI CSI-2 Rx Subsystem
Add bindings documentation for Xilinx MIPI CSI-2 Rx Subsystem.
The Xilinx MIPI CSI-2 Rx Subsystem consists of a CSI-2 Rx controller, a
D-PHY in Rx mode and a Video Format Bridge.
[Fix indentation error in if...then...else]
[Fix number of cells in reg property]
Signed-off-by: Vishal Sagar <vishal.sagar@xilinx.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linus Torvalds [Sun, 14 Jun 2020 19:45:04 +0000 (12:45 -0700)]
Linux 5.8-rc1
Linus Torvalds [Sun, 14 Jun 2020 18:39:31 +0000 (11:39 -0700)]
Merge tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux
Pull SafeSetID update from Micah Morton:
"Add additional LSM hooks for SafeSetID
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls.
The work to do that is not yet complete, so probably won't make it in
for v5.8, but we are looking to get this simple patch in for v5.8
since we have it ready.
We are planning on the rest of the work for extending the SafeSetID
LSM being merged during the v5.9 merge window"
* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
security: Add LSM hooks to set*gid syscalls
Thomas Cedeno [Tue, 9 Jun 2020 17:22:13 +0000 (10:22 -0700)]
security: Add LSM hooks to set*gid syscalls
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
Linus Torvalds [Sun, 14 Jun 2020 16:47:25 +0000 (09:47 -0700)]
Merge tag 'for-5.8-part2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This reverts the direct io port to iomap infrastructure of btrfs
merged in the first pull request. We found problems in invalidate page
that don't seem to be fixable as regressions or without changing iomap
code that would not affect other filesystems.
There are four reverts in total, but three of them are followup
cleanups needed to revert
a43a67a2d715 cleanly. The result is the
buffer head based implementation of direct io.
Reverts are not great, but under current circumstances I don't see
better options"
* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: switch to iomap_dio_rw() for dio"
Revert "fs: remove dio_end_io()"
Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
Revert "btrfs: split btrfs_direct_IO to read and write part"
Linus Torvalds [Sat, 13 Jun 2020 23:27:13 +0000 (16:27 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
David Sterba [Tue, 9 Jun 2020 17:56:06 +0000 (19:56 +0200)]
Revert "btrfs: switch to iomap_dio_rw() for dio"
This reverts commit
a43a67a2d715540c1368b9501a22b0373b5874c0.
This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.
The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.
Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.
There have been discussions how to fix that, but revert seems to be the
least intrusive option.
Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/
Signed-off-by: David Sterba <dsterba@suse.com>
Grygorii Strashko [Sat, 13 Jun 2020 14:54:14 +0000 (17:54 +0300)]
net: ethernet: ti: ale: fix allmulti for nu type ale
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit
9d1f6447274f ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").
Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
Fixes:
9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grygorii Strashko [Sat, 13 Jun 2020 14:52:59 +0000 (17:52 +0300)]
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.
Fixes:
93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 13 Jun 2020 22:28:08 +0000 (15:28 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Liao Pingfang [Sat, 13 Jun 2020 06:03:26 +0000 (14:03 +0800)]
net: atm: Remove the error message according to the atomic context
Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 13 Jun 2020 20:43:56 +0000 (13:43 -0700)]
Merge tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
"12 cifs/smb3 fixes, 2 for stable.
- add support for idsfromsid on create and chgrp/chown allowing
ability to save owner information more naturally for some workloads
- improve query info (getattr) when SMB3.1.1 posix extensions are
negotiated by using new query info level"
* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add debug message for new file creation with idsfromsid mount option
cifs: fix chown and chgrp when idsfromsid mount option enabled
smb3: allow uid and gid owners to be set on create with idsfromsid mount option
smb311: Add tracepoints for new compound posix query info
smb311: add support for using info level for posix extensions query
smb311: Add support for lookup with posix extensions query info
smb311: Add support for SMB311 query info (non-compounded)
SMB311: Add support for query info using posix extensions (level 100)
smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
smb3: fix typo in mount options displayed in /proc/mounts
cifs: Add get_security_type_str function to return sec type.
smb3: extend fscache mount volume coherency check
Linus Torvalds [Sat, 13 Jun 2020 20:41:24 +0000 (13:41 -0700)]
binderfs: add gitignore for generated sample program
Let's keep "git status" happy and quiet.
Fixes:
9762dc1432e1 ("samples: add binderfs sample program
Fixes:
fca5e94921d5 ("samples: binderfs: really compile this sample and fix build issues")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Jun 2020 20:32:40 +0000 (13:32 -0700)]
doc: don't use deprecated "---help---" markers in target docs
I'm not convinced the script makes useful automaed help lines anyway,
but since we're trying to deprecate the use of "---help---" in Kconfig
files, let's fix the doc example code too.
See commit
a7f7f6248d97 ("treewide: replace '---help---' in Kconfig
files with 'help'")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Jun 2020 20:29:16 +0000 (13:29 -0700)]
Merge tag 'kbuild-v5.8-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
Linus Torvalds [Sat, 13 Jun 2020 20:17:49 +0000 (13:17 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is the set of changes collected since just before the merge
window opened. It's mostly minor fixes in drivers.
The one non-driver set is the three optical disk (sr) changes where
two are error path fixes and one is a helper conversion.
The big driver change is the hpsa compat_alloc_userspace rework by Al
so he can kill the remaining user. This has been tested and acked by
the maintainer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
scsi: cxlflash: Remove an unnecessary NULL check
scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
scsi: sr: Fix sr_probe() missing deallocate of device minor
scsi: sr: Fix sr_probe() missing mutex_destroy
scsi: st: Convert convert get_user_pages() --> pin_user_pages()
scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
scsi: target: Fix NULL pointer dereference
scsi: target: Initialize LUN in transport_init_se_cmd()
scsi: target: Factor out a new helper, target_cmd_init_cdb()
scsi: hpsa: hpsa_ioctl(): Tidy up a bit
scsi: hpsa: Get rid of compat_alloc_user_space()
scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
scsi: ufs: Remove redundant urgent_bkop_lvl initialization
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
scsi: qedf: Remove redundant initialization of variable rc
scsi: mpt3sas: Fix memset() in non-RDPQ mode
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
...
Linus Torvalds [Sat, 13 Jun 2020 20:12:38 +0000 (13:12 -0700)]
Merge branch 'i2c/for-5.8' of git://git./linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has quite some patches for you this time. I hope it is the move to
per-driver-maintainers which is now showing results. We will see.
The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
larger refactoring of the Designware, Tegra, and PXA drivers, the
Cadence driver supports being a slave now, and there is support to
instanciate SPD eeproms for well-known cases (which will be
user-visible because the i801 driver supports it), and some
devm_platform_ioremap_resource() conversions which blow up the
diffstat.
Note that I applied the Nuvoton driver quite late, so some minor fixup
patches arrived during the merge window. I chose to apply them right
away because they were trivial"
* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
i2c: Drop stray comma in MODULE_AUTHOR statements
i2c: npcm7xx: npcm_i2caddr[] can be static
MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
i2c: npcm7xx: Fix a couple of error codes in probe
i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
i2c: npcm7xx: Remove unnecessary parentheses
i2c: npcm7xx: Add support for slave mode for Nuvoton
i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
dt-bindings: i2c: npcm7xx: add NPCM I2C controller
i2c: pxa: don't error out if there's no pinctrl
i2c: add 'single-master' property to generic bindings
i2c: designware: Add Baikal-T1 System I2C support
i2c: designware: Move reg-space remapping into a dedicated function
i2c: designware: Retrieve quirk flags as early as possible
i2c: designware: Convert driver to using regmap API
i2c: designware: Discard Cherry Trail model flag
i2c: designware: Add Baytrail sem config DW I2C platform dependency
i2c: designware: slave: Set DW I2C core module dependency
i2c: designware: Use `-y` to build multi-object modules
dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
...
Linus Torvalds [Sat, 13 Jun 2020 20:09:38 +0000 (13:09 -0700)]
Merge tag 'media/v5.8-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull more media updates from Mauro Carvalho Chehab:
- a set of atomisp patches. They remove several abstraction layers, and
fixes clang and gcc warnings (that were hidden via some macros that
were disabling 4 or 5 types of warnings there). There are also some
important fixes and sensor auto-detection on newer BIOSes via ACPI
_DCM tables.
- some fixes
* tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
media: rkvdec: Fix H264 scaling list order
media: v4l2-ctrls: Unset correct HEVC loop filter flag
media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
media: v4l2-subdev.rst: correct information about v4l2 events
media: s5p-mfc: Properly handle dma_parms for the allocated devices
media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
media: cedrus: Implement runtime PM
media: cedrus: Program output format during each run
media: atomisp: improve ACPI/DMI detection logs
media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
media: Revert "media: atomisp: Add some ACPI detection info"
media: atomisp: improve sensor detection code to use _DSM table
media: atomisp: get rid of an iomem abstraction layer
media: atomisp: get rid of a string_support.h abstraction layer
media: atomisp: use strscpy() instead of less secure variants
media: atomisp: set DFS to MAX if sensor doesn't report fps
media: atomisp: use different dfs failed messages
media: atomisp: change the detection of ISP2401 at runtime
media: atomisp: use macros from intel-family.h
media: atomisp: don't set hpll_freq twice with different values
...
Linus Torvalds [Sat, 13 Jun 2020 20:04:36 +0000 (13:04 -0700)]
Merge tag 'libnvdimm-for-5.8' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Small collection of cleanups to rework usage of ->queuedata and the
GUID api"
* tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: stop using ->queuedata
nvdimm/btt: stop using ->queuedata
nvdimm/blk: stop using ->queuedata
libnvdimm: Replace guid_copy() with import_guid() where it makes sense
Linus Torvalds [Sat, 13 Jun 2020 20:00:54 +0000 (13:00 -0700)]
watch_queue: add gitignore for generated sample program
Let's keep "git status" happy and quiet.
Fixes:
f5b5a164f9a1 ("Add sample notification program")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Jun 2020 19:44:30 +0000 (12:44 -0700)]
Merge tag 'iomap-5.8-merge-1' of git://git./fs/xfs/xfs-linux
Pull iomap fix from Darrick Wong:
"A single iomap bug fix for a variable type mistake on 32-bit
architectures, fixing an integer overflow problem in the unshare
actor"
* tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Fix unsharing of an extent >2GB on a 32-bit machine
Linus Torvalds [Sat, 13 Jun 2020 19:40:24 +0000 (12:40 -0700)]
Merge tag 'xfs-5.8-merge-9' of git://git./fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"We've settled down into the bugfix phase; this one fixes a resource
leak on an error bailout path"
* tag 'xfs-5.8-merge-9' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add the missed xfs_perag_put() for xfs_ifree_cluster()
Linus Torvalds [Sat, 13 Jun 2020 19:38:57 +0000 (12:38 -0700)]
Merge tag '9p-for-5.8' of git://github.com/martinetd/linux
Pull 9p update from Dominique Martinet:
"Another very quiet cycle... Only one commit: increase the size of the
ring used for xen transport"
* tag '9p-for-5.8' of git://github.com/martinetd/linux:
9p/xen: increase XEN_9PFS_RING_ORDER
Linus Torvalds [Sat, 13 Jun 2020 17:56:31 +0000 (10:56 -0700)]
Merge tag 'powerpc-5.8-2' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a recent change which broke nested KVM guests on Power9.
Thanks to Alexey Kardashevskiy"
* tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Fix nested guest RC bits update
Linus Torvalds [Sat, 13 Jun 2020 17:55:29 +0000 (10:55 -0700)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- fix for "hex" Kconfig default to use 0x0 rather than 0 to allow these
to be removed from defconfigs
- fix from Ard Biesheuvel for EFI HYP mode booting
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully
ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0
Linus Torvalds [Sat, 13 Jun 2020 17:54:09 +0000 (10:54 -0700)]
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC update from Stafford Horne:
"One patch found wile I was getting the glibc port ready: fix issue
with clone TLS arg getting overwritten"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Fix issue with argument clobbering for clone/fork