Peter Zijlstra [Tue, 10 Oct 2023 18:57:39 +0000 (20:57 +0200)]
sched: Fix stop_one_cpu_nowait() vs hotplug
[ Upstream commit
f0498d2a54e7966ce23cd7c7ff42c64fa0059b07 ]
Kuyo reported sporadic failures on a sched_setaffinity() vs CPU
hotplug stress-test -- notably affine_move_task() remains stuck in
wait_for_completion(), leading to a hung-task detector warning.
Specifically, it was reported that stop_one_cpu_nowait(.fn =
migration_cpu_stop) returns false -- this stopper is responsible for
the matching complete().
The race scenario is:
CPU0 CPU1
// doing _cpu_down()
__set_cpus_allowed_ptr()
task_rq_lock();
takedown_cpu()
stop_machine_cpuslocked(take_cpu_down..)
<PREEMPT: cpu_stopper_thread()
MULTI_STOP_PREPARE
...
__set_cpus_allowed_ptr_locked()
affine_move_task()
task_rq_unlock();
<PREEMPT: cpu_stopper_thread()\>
ack_state()
MULTI_STOP_RUN
take_cpu_down()
__cpu_disable();
stop_machine_park();
stopper->enabled = false;
/>
/>
stop_one_cpu_nowait(.fn = migration_cpu_stop);
if (stopper->enabled) // false!!!
That is, by doing stop_one_cpu_nowait() after dropping rq-lock, the
stopper thread gets a chance to preempt and allows the cpu-down for
the target CPU to complete.
OTOH, since stop_one_cpu_nowait() / cpu_stop_queue_work() needs to
issue a wakeup, it must not be ran under the scheduler locks.
Solve this apparent contradiction by keeping preemption disabled over
the unlock + queue_stopper combination:
preempt_disable();
task_rq_unlock(...);
if (!stop_pending)
stop_one_cpu_nowait(...)
preempt_enable();
This respects the lock ordering contraints while still avoiding the
above race. That is, if we find the CPU is online under rq-lock, the
targeted stop_one_cpu_nowait() must succeed.
Apply this pattern to all similar stop_one_cpu_nowait() invocations.
Fixes:
6d337eab041d ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Reported-by: "Kuyo Chang (張建文)" <Kuyo.Chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Kuyo Chang (張建文)" <Kuyo.Chang@mediatek.com>
Link: https://lkml.kernel.org/r/20231010200442.GA16515@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaron Plattner [Thu, 5 Oct 2023 00:08:18 +0000 (17:08 -0700)]
objtool: Propagate early errors
[ Upstream commit
e959c279d391c10b35ce300fb4b0fe3b98e86bd2 ]
If objtool runs into a problem that causes it to exit early, the overall
tool still returns a status code of 0, which causes the build to
continue as if nothing went wrong.
Note this only affects early errors, as later errors are still ignored
by check().
Fixes:
b51277eb9775 ("objtool: Ditch subcommands")
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/cb6a28832d24b2ebfafd26da9abb95f874c83045.1696355111.git.aplattner@nvidia.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Sat, 16 Sep 2023 23:29:54 +0000 (00:29 +0100)]
sched/uclamp: Ignore (util == 0) optimization in feec() when p_util_max = 0
[ Upstream commit
23c9519def98ee0fa97ea5871535e9b136f522fc ]
find_energy_efficient_cpu() bails out early if effective util of the
task is 0 as the delta at this point will be zero and there's nothing
for EAS to do. When uclamp is being used, this could lead to wrong
decisions when uclamp_max is set to 0. In this case the task is capped
to performance point 0, but it is actually running and consuming energy
and we can benefit from EAS energy calculations.
Rework the condition so that it bails out when both util and uclamp_min
are 0.
We can do that without needing to use uclamp_task_util(); remove it.
Fixes:
d81304bc6193 ("sched/uclamp: Cater for uclamp in find_energy_efficient_cpu()'s early exit condition")
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230916232955.2099394-3-qyousef@layalina.io
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Sat, 16 Sep 2023 23:29:53 +0000 (00:29 +0100)]
sched/uclamp: Set max_spare_cap_cpu even if max_spare_cap is 0
[ Upstream commit
6b00a40147653c8ea748e8f4396510f252763364 ]
When uclamp_max is being used, the util of the task could be higher than
the spare capacity of the CPU, but due to uclamp_max value we force-fit
it there.
The way the condition for checking for max_spare_cap in
find_energy_efficient_cpu() was constructed; it ignored any CPU that has
its spare_cap less than or _equal_ to max_spare_cap. Since we initialize
max_spare_cap to 0; this lead to never setting max_spare_cap_cpu and
hence ending up never performing compute_energy() for this cluster and
missing an opportunity for a better energy efficient placement to honour
uclamp_max setting.
max_spare_cap = 0;
cpu_cap = capacity_of(cpu) - cpu_util(p); // 0 if cpu_util(p) is high
...
util_fits_cpu(...); // will return true if uclamp_max forces it to fit
...
// this logic will fail to update max_spare_cap_cpu if cpu_cap is 0
if (cpu_cap > max_spare_cap) {
max_spare_cap = cpu_cap;
max_spare_cap_cpu = cpu;
}
prev_spare_cap suffers from a similar problem.
Fix the logic by converting the variables into long and treating -1
value as 'not populated' instead of 0 which is a viable and correct
spare capacity value. We need to be careful signed comparison is used
when comparing with cpu_cap in one of the conditions.
Fixes:
1d42509e475c ("sched/fair: Make EAS wakeup placement consider uclamp restrictions")
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230916232955.2099394-2-qyousef@layalina.io
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Mon, 25 Sep 2023 12:02:59 +0000 (13:02 +0100)]
iov_iter, x86: Be consistent about the __user tag on copy_mc_to_user()
[ Upstream commit
066baf92bed934c9fb4bcee97a193f47aa63431c ]
copy_mc_to_user() has the destination marked __user on powerpc, but not on
x86; the latter results in a sparse warning in lib/iov_iter.c.
Fix this by applying the tag on x86 too.
Fixes:
ec6347bb4339 ("x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230925120309.1731676-3-dhowells@redhat.com
cc: Dan Williams <dan.j.williams@intel.com>
cc: Thomas Gleixner <tglx@linutronix.de>
cc: Ingo Molnar <mingo@redhat.com>
cc: Borislav Petkov <bp@alien8.de>
cc: Dave Hansen <dave.hansen@linux.intel.com>
cc: "H. Peter Anvin" <hpa@zytor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Christian Brauner <christian@brauner.io>
cc: Matthew Wilcox <willy@infradead.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: David Laight <David.Laight@ACULAB.COM>
cc: x86@kernel.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengming Zhou [Wed, 13 Sep 2023 13:20:31 +0000 (13:20 +0000)]
sched/fair: Fix cfs_rq_is_decayed() on !SMP
[ Upstream commit
c0490bc9bb62d9376f3dd4ec28e03ca0fef97152 ]
We don't need to maintain per-queue leaf_cfs_rq_list on !SMP, since
it's used for cfs_rq load tracking & balancing on SMP.
But sched debug interface uses it to print per-cfs_rq stats.
This patch fixes the !SMP version of cfs_rq_is_decayed(), so the
per-queue leaf_cfs_rq_list is also maintained correctly on !SMP,
to fix the warning in assert_list_leaf_cfs_rq().
Fixes:
0a00a354644e ("sched/fair: Delete useless condition in tg_unthrottle_up()")
Reported-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Closes: https://lore.kernel.org/all/ZN87UsqkWcFLDxea@swlinux02/
Link: https://lore.kernel.org/r/20230913132031.2242151-1-chengming.zhou@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zev Weiss [Fri, 29 Sep 2023 20:08:23 +0000 (13:08 -0700)]
hwmon: (nct6775) Fix incorrect variable reuse in fan_div calculation
commit
920057ad521dc8669e534736c2a12c14ec9fb2d7 upstream.
In the regmap conversion in commit
4ef2774511dc ("hwmon: (nct6775)
Convert register access to regmap API") I reused the 'reg' variable
for all three register reads in the fan speed calculation loop in
nct6775_update_device(), but failed to notice that the value from the
first one (data->REG_FAN[i]) is actually used in the call to
nct6775_select_fan_div() at the end of the loop body. Since that
patch the register value passed to nct6775_select_fan_div() has been
(conditionally) incorrectly clobbered with the value of a different
register than intended, which has in at least some cases resulted in
fan speeds being adjusted down to zero.
Fix this by using dedicated temporaries for the two intermediate
register reads instead of 'reg'.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes:
4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Reported-by: Thomas Zajic <zlatko@gmx.at>
Tested-by: Thomas Zajic <zlatko@gmx.at>
Cc: stable@vger.kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230929200822.964-2-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 8 Nov 2023 13:11:05 +0000 (14:11 +0100)]
Linux 6.1.62
Link: https://lore.kernel.org/r/20231106130301.807965064@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hasemeyer [Fri, 20 Oct 2023 20:59:53 +0000 (14:59 -0600)]
ASoC: SOF: sof-pci-dev: Fix community key quirk detection
commit
7dd692217b861a8292ff8ac2c9d4458538fd6b96 upstream.
Some Chromebooks do not populate the product family DMI value resulting
in firmware load failures.
Add another quirk detection entry that looks for "Google" in the BIOS
version. Theoretically, PRODUCT_FAMILY could be replaced with
BIOS_VERSION, but it is left as a quirk to be conservative.
Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20231020145953.v1.1.Iaf5702dc3f8af0fd2f81a22ba2da1a5e15b3604c@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Hasemeyer [Wed, 18 Oct 2023 23:59:31 +0000 (17:59 -0600)]
ALSA: hda: intel-dsp-config: Fix JSL Chromebook quirk detection
commit
7c05b44e1a50d9cbfc4f731dddc436a24ddc129a upstream.
Some Jasperlake Chromebooks overwrite the system vendor DMI value to the
name of the OEM that manufactured the device. This breaks Chromebook
quirk detection as it expects the system vendor to be "Google".
Add another quirk detection entry that looks for "Google" in the BIOS
version.
Cc: stable@vger.kernel.org
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231018235944.1860717-1-markhas@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Siddharth Vadapalli [Fri, 20 Oct 2023 12:02:48 +0000 (17:32 +0530)]
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
commit
8293703a492ae97c86af27c75b76e6239ec86483 upstream.
Add DEVICE_ID for J721S2 and enable support for endpoints configured
with this DEVICE_ID in the pci_endpoint_test driver.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231020120248.3168406-1-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:17 +0000 (17:03 +0100)]
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
commit
e4876dacaca46a1b09f9b417480924ab12019a5b upstream.
Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.
Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.
Fixes:
ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:16 +0000 (17:03 +0100)]
tty: 8250: Add support for Intashield IX cards
commit
62d2ec2ded278c7512d91ca7bf8eb9bac46baf90 upstream.
Add support for the IX-100, IX-200 and IX-400 serial cards.
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899614E5837E82A03272A4BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:15 +0000 (17:03 +0100)]
tty: 8250: Add support for additional Brainboxes PX cards
commit
9604884e592cd04ead024c9737c67a77f175cab9 upstream.
Add support for some more of the Brainboxes PX (PCIe) range
of serial cards, namely
PX-275/PX-279, PX-475 (serial port, not LPT), PX-820,
PX-803/PX-857 (additional ID).
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB78996BEC353FB346FC35444BC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:13 +0000 (17:03 +0100)]
tty: 8250: Fix up PX-803/PX-857
commit
ee61337b934c99c2611e0a945d592019b2e00c82 upstream.
The PX-803/PX-857 are variants of each other, add a note.
Additionally fix up the port counts for the card (2, not 1).
Fixes:
ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB789978C8ED872FB4B014E132C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:12 +0000 (17:03 +0100)]
tty: 8250: Fix port count of PX-257
commit
d0ff5b24c2f112f29dea4c38b3bac9597b1be9ba upstream.
The port count of the PX-257 Rev3 is actually 2, not 4.
Fixes:
ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899C804D9F04E727B5A0E8FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:11 +0000 (17:03 +0100)]
tty: 8250: Add support for Intashield IS-100
commit
4d994e3cf1b541ff32dfb03fbbc60eea68f9645b upstream.
Add support for the Intashield IS-100 1 port serial card.
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899A0E0CDAA505AF5A874CDC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:10 +0000 (17:03 +0100)]
tty: 8250: Add support for Brainboxes UP cards
commit
2c6fec1e1532f15350be7e14ba6b88a39d289fe4 upstream.
Add support for the Brainboxes UP (powered PCI) range of
cards, namely UP-189, UP-200, UP-869 and UP-880.
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB7899B5B59FF3D8587E88C117C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:09 +0000 (17:03 +0100)]
tty: 8250: Add support for additional Brainboxes UC cards
commit
c563db486db7d245c0e2f319443417ae8e692f7f upstream.
Add device IDs for some more Brainboxes UC cards, namely
UC-235/UC-246, UC-253/UC-734, UC-302, UC-313, UC-346, UC-357,
UC-607 and UC-836.
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB789969998A6C3FAFCD95C85DC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Williams [Fri, 20 Oct 2023 16:03:08 +0000 (17:03 +0100)]
tty: 8250: Remove UC-257 and UC-431
commit
33092fb3af51deb80849e90a17bada44bbcde6b3 upstream.
The UC-257 is a serial + LPT card, so remove it from this driver.
A patch has been submitted to add it to parport_serial instead.
Additionaly, the UC-431 does not use this card ID, only the UC-420
does. The 431 is a 3-port card and there is no generic 3-port configuration
available, so remove reference to it from this driver.
Fixes:
152d1afa834c ("tty: Add support for Brainboxes UC cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Link: https://lore.kernel.org/r/DU0PR02MB78995ADF7394C74AD4CF3357C4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Starke [Thu, 26 Oct 2023 05:58:43 +0000 (07:58 +0200)]
tty: n_gsm: fix race condition in status line change on dead connections
commit
3a75b205de43365f80a33b98ec9289785da56243 upstream.
gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all
timers, removing the virtual tty devices and clearing the data queues.
This procedure, however, may cause subsequent changes of the virtual modem
status lines of a DLCI. More data is being added the outgoing data queue
and the deleted kick timer is restarted to handle this. At this point many
resources have already been removed by the cleanup procedure. Thus, a
kernel panic occurs.
Fix this by proving in gsm_modem_update() that the cleanup procedure has
not been started and the mux is still alive.
Note that writing to a virtual tty is already protected by checks against
the DLCI specific connection state.
Fixes:
c568f7086c6e ("tty: n_gsm: fix missing timer to handle stalled links")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20231026055844.3127-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Konovalov [Thu, 26 Oct 2023 20:01:12 +0000 (22:01 +0200)]
usb: raw-gadget: properly handle interrupted requests
commit
e8033bde451eddfb9b1bbd6e2d848c1b5c277222 upstream.
Currently, if a USB request that was queued by Raw Gadget is interrupted
(via a signal), wait_for_completion_interruptible returns -ERESTARTSYS.
Raw Gadget then attempts to propagate this value to userspace as a return
value from its ioctls. However, when -ERESTARTSYS is returned by a syscall
handler, the kernel internally restarts the syscall.
This doesn't allow userspace applications to interrupt requests queued by
Raw Gadget (which is required when the emulated device is asked to switch
altsettings). It also violates the implied interface of Raw Gadget that a
single ioctl must only queue a single USB request.
Instead, make Raw Gadget do what GadgetFS does: check whether the request
was interrupted (dequeued with status == -ECONNRESET) and report -EINTR to
userspace.
Fixes:
f2c2e717642c ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/0db45b1d7cc466e3d4d1ab353f61d63c977fbbc5.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jimmy Hu [Fri, 20 Oct 2023 01:21:32 +0000 (01:21 +0000)]
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
commit
4987daf86c152ff882d51572d154ad12e4ff3a4b upstream.
It is possible that typec_register_partner() returns ERR_PTR on failure.
When port->partner is an error, a NULL pointer dereference may occur as
shown below.
[91222.095236][ T319] typec port0: failed to register partner (-17)
...
[91225.061491][ T319] Unable to handle kernel NULL pointer dereference
at virtual address
000000000000039f
[91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc
[91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc
[91225.308067][ T319] Call trace:
[91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc
[91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8
[91225.355900][ T319] kthread_worker_fn+0x178/0x58c
[91225.355902][ T319] kthread+0x150/0x200
[91225.355905][ T319] ret_from_fork+0x10/0x30
Add a check for port->partner to avoid dereferencing a NULL pointer.
Fixes:
5e1d4c49fbc8 ("usb: typec: tcpm: Determine common SVDM Version")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://lore.kernel.org/r/20231020012132.100960-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LihaSika [Fri, 27 Oct 2023 17:28:04 +0000 (20:28 +0300)]
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
commit
0e3139e6543b241b3e65956a55c712333bef48ac upstream.
Change lower bcdDevice value for "Super Top USB 2.0 SATA BRIDGE" to match
1.50. I have such an older device with bcdDevice=1.50 and it will not work
otherwise.
Cc: stable@vger.kernel.org
Signed-off-by: Liha Sikanen <lihasika@gmail.com>
Link: https://lore.kernel.org/r/ccf7d12a-8362-4916-b3e0-f4150f54affd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vicki Pfau [Wed, 27 Sep 2023 20:22:12 +0000 (13:22 -0700)]
PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
commit
7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 upstream.
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be
operated as either a USB Host or a USB Device, similar to on the AMD Nolan
platform.
be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD
device") added a quirk to let the dwc3 driver claim the Nolan device since
it provides more specific support.
Extend that quirk to include the VanGogh SoC USB3 device.
Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com
Signed-off-by: Vicki Pfau <vi@endrift.com>
[bhelgaas: include
be6646bfbaec reference, add stable tag]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max McCarthy [Tue, 24 Oct 2023 12:30:19 +0000 (12:30 +0000)]
ALSA: usb-audio: add quirk flag to enable native DSD for McIntosh devices
commit
99248c8902f505ec064cf2b0f74629016f2f4c82 upstream.
McIntosh devices supporting native DSD require the feature to be
explicitly exposed. Add a flag that fixes an issue where DSD audio was
defaulting to DSD over PCM instead of delivering raw DSD data.
Signed-off-by: Max McCarthy <mmccarthy@mcintoshlabs.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BL0PR13MB4433226005162D186A8DFF4AD6DFA@BL0PR13MB4433.namprd13.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam R. Howlett [Fri, 29 Sep 2023 18:30:40 +0000 (14:30 -0400)]
mmap: fix error paths with dup_anon_vma()
commit
824135c46b00df7fb369ec7f1f8607427bbebeb0 upstream.
When the calling function fails after the dup_anon_vma(), the
duplication of the anon_vma is not being undone. Add the necessary
unlink_anon_vma() call to the error paths that are missing them.
This issue showed up during inspection of the error path in vma_merge()
for an unrelated vma iterator issue.
Users may experience increased memory usage, which may be problematic as
the failure would likely be caused by a low memory situation.
Link: https://lkml.kernel.org/r/20230929183041.2835469-3-Liam.Howlett@oracle.com
Fixes:
d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam R. Howlett [Thu, 28 Sep 2023 17:24:32 +0000 (13:24 -0400)]
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
commit
51f625377561e5b167da2db5aafb7ee268f691c5 upstream.
The two users of mbind_range() are expecting that mbind_range() will
update the pointer to the previous VMA, or return an error. However,
set_mempolicy_home_node() does not call mbind_range() if there is no VMA
policy. The fix is to update the pointer to the previous VMA prior to
continuing iterating the VMAs when there is no policy.
Users may experience a WARN_ON() during VMA policy updates when updating
a range of VMAs on the home node.
Link: https://lkml.kernel.org/r/20230928172432.2246534-1-Liam.Howlett@oracle.com
Link: https://lore.kernel.org/linux-mm/CALcu4rbT+fMVNaO_F2izaCT+e7jzcAciFkOvk21HGJsmLcUuwQ@mail.gmail.com/
Fixes:
f4e9e0e69468 ("mm/mempolicy: fix use-after-free of VMA iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
Closes: https://lore.kernel.org/linux-mm/CALcu4rbT+fMVNaO_F2izaCT+e7jzcAciFkOvk21HGJsmLcUuwQ@mail.gmail.com/
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxim Levitsky [Thu, 28 Sep 2023 17:33:51 +0000 (20:33 +0300)]
x86: KVM: SVM: always update the x2avic msr interception
commit
b65235f6e102354ccafda601eaa1c5bef5284d21 upstream.
The following problem exists since x2avic was enabled in the KVM:
svm_set_x2apic_msr_interception is called to enable the interception of
the x2apic msrs.
In particular it is called at the moment the guest resets its apic.
Assuming that the guest's apic was in x2apic mode, the reset will bring
it back to the xapic mode.
The svm_set_x2apic_msr_interception however has an erroneous check for
'!apic_x2apic_mode()' which prevents it from doing anything in this case.
As a result of this, all x2apic msrs are left unintercepted, and that
exposes the bare metal x2apic (if enabled) to the guest.
Oops.
Remove the erroneous '!apic_x2apic_mode()' check to fix that.
This fixes CVE-2023-5090
Fixes:
4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20230928173354.217464-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Rogers [Sat, 16 Sep 2023 03:56:40 +0000 (20:56 -0700)]
perf evlist: Avoid frequency mode for the dummy event
[ Upstream commit
f9cdeb58a9cf46c09b56f5f661ea8da24b6458c3 ]
Dummy events are created with an attribute where the period and freq
are zero. evsel__config will then see the uninitialized values and
initialize them in evsel__default_freq_period. As fequency mode is
used by default the dummy event would be set to use frequency
mode. However, this has no effect on the dummy event but does cause
unnecessary timers/interrupts. Avoid this overhead by setting the
period to 1 for dummy events.
evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and
period=1. This isn't necessary after this change and so the setting is
removed.
From Stephane:
The dummy event is not counting anything. It is used to collect mmap
records and avoid a race condition during the synthesize mmap phase of
perf record. As such, it should not cause any overhead during active
profiling. Yet, it did. Because of a bug the dummy event was
programmed as a sampling event in frequency mode. Events in that mode
incur more kernel overheads because on timer tick, the kernel has to
look at the number of samples for each event and potentially adjust
the sampling period to achieve the desired frequency. The dummy event
was therefore adding a frequency event to task and ctx contexts we may
otherwise not have any, e.g.,
perf record -a -e cpu/event=0x3c,period=
10000000/.
On each timer tick the perf_adjust_freq_unthr_context() is invoked and
if ctx->nr_freq is non-zero, then the kernel will loop over ALL the
events of the context looking for frequency mode ones. In doing, so it
locks the context, and enable/disable the PMU of each hw event. If all
the events of the context are in period mode, the kernel will have to
traverse the list for nothing incurring overhead. The overhead is
multiplied by a very large factor when this happens in a guest kernel.
There is no need for the dummy event to be in frequency mode, it does
not count anything and therefore should not cause extra overhead for
no reason.
Fixes:
5bae0250237f ("perf evlist: Introduce perf_evlist__new_dummy constructor")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Wed, 13 Sep 2023 03:32:33 +0000 (11:32 +0800)]
power: supply: core: Use blocking_notifier_call_chain to avoid RCU complaint
[ Upstream commit
bbaa6ffa5b6c9609d3b3c431c389b407eea5441f ]
AMD PMF driver can cause the following warning:
[ 196.159546] ------------[ cut here ]------------
[ 196.159556] Voluntary context switch within RCU read-side critical section!
[ 196.159571] WARNING: CPU: 0 PID: 9 at kernel/rcu/tree_plugin.h:320 rcu_note_context_switch+0x43d/0x560
[ 196.159604] Modules linked in: nvme_fabrics ccm rfcomm snd_hda_scodec_cs35l41_spi cmac algif_hash algif_skcipher af_alg bnep joydev btusb btrtl uvcvideo btintel btbcm videobuf2_vmalloc intel_rapl_msr btmtk videobuf2_memops uvc videobuf2_v4l2 intel_rapl_common binfmt_misc hid_sensor_als snd_sof_amd_vangogh hid_sensor_trigger bluetooth industrialio_triggered_buffer videodev snd_sof_amd_rembrandt hid_sensor_iio_common amdgpu ecdh_generic kfifo_buf videobuf2_common hp_wmi kvm_amd sparse_keymap snd_sof_amd_renoir wmi_bmof industrialio ecc mc nls_iso8859_1 kvm snd_sof_amd_acp irqbypass snd_sof_xtensa_dsp crct10dif_pclmul crc32_pclmul mt7921e snd_sof_pci snd_ctl_led polyval_clmulni mt7921_common polyval_generic snd_sof ghash_clmulni_intel mt792x_lib mt76_connac_lib sha512_ssse3 snd_sof_utils aesni_intel snd_hda_codec_realtek crypto_simd mt76 snd_hda_codec_generic cryptd snd_soc_core snd_hda_codec_hdmi rapl ledtrig_audio input_leds snd_compress i2c_algo_bit drm_ttm_helper mac80211 snd_pci_ps hid_multitouch ttm drm_exec
[ 196.159970] drm_suballoc_helper snd_rpl_pci_acp6x amdxcp drm_buddy snd_hda_intel snd_acp_pci snd_hda_scodec_cs35l41_i2c serio_raw gpu_sched snd_hda_scodec_cs35l41 snd_acp_legacy_common snd_intel_dspcfg snd_hda_cs_dsp_ctls snd_hda_codec libarc4 drm_display_helper snd_pci_acp6x cs_dsp snd_hwdep snd_soc_cs35l41_lib video k10temp snd_pci_acp5x thunderbolt snd_hda_core drm_kms_helper cfg80211 snd_seq snd_rn_pci_acp3x snd_pcm snd_acp_config cec snd_soc_acpi snd_seq_device rc_core ccp snd_pci_acp3x snd_timer snd soundcore wmi amd_pmf platform_profile amd_pmc mac_hid serial_multi_instantiate wireless_hotkey hid_sensor_hub sch_fq_codel msr parport_pc ppdev lp parport efi_pstore ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log cdc_ether usbnet r8152 mii hid_generic nvme i2c_hid_acpi i2c_hid nvme_core i2c_piix4 xhci_pci amd_sfh drm xhci_pci_renesas nvme_common hid
[ 196.160382] CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1 #4
[ 196.160397] Hardware name: HP HP EliteBook 845 14 inch G10 Notebook PC/8B6E, BIOS V82 Ver. 01.02.00 08/24/2023
[ 196.160405] Workqueue: events power_supply_changed_work
[ 196.160426] RIP: 0010:rcu_note_context_switch+0x43d/0x560
[ 196.160440] Code: 00 48 89 be 40 08 00 00 48 89 86 48 08 00 00 48 89 10 e9 63 fe ff ff 48 c7 c7 10 e7 b0 9e c6 05 e8 d8 20 02 01 e8 13 0f f3 ff <0f> 0b e9 27 fc ff ff a9 ff ff ff 7f 0f 84 cf fc ff ff 65 48 8b 3c
[ 196.160450] RSP: 0018:
ffffc900001878f0 EFLAGS:
00010046
[ 196.160462] RAX:
0000000000000000 RBX:
ffff88885e834040 RCX:
0000000000000000
[ 196.160470] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
[ 196.160476] RBP:
ffffc90000187910 R08:
0000000000000000 R09:
0000000000000000
[ 196.160482] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
[ 196.160488] R13:
0000000000000000 R14:
ffff888100990000 R15:
ffff888100990000
[ 196.160495] FS:
0000000000000000(0000) GS:
ffff88885e800000(0000) knlGS:
0000000000000000
[ 196.160504] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 196.160512] CR2:
000055cb053c8246 CR3:
000000013443a000 CR4:
0000000000750ef0
[ 196.160520] PKRU:
55555554
[ 196.160526] Call Trace:
[ 196.160532] <TASK>
[ 196.160548] ? show_regs+0x72/0x90
[ 196.160570] ? rcu_note_context_switch+0x43d/0x560
[ 196.160580] ? __warn+0x8d/0x160
[ 196.160600] ? rcu_note_context_switch+0x43d/0x560
[ 196.160613] ? report_bug+0x1bb/0x1d0
[ 196.160637] ? handle_bug+0x46/0x90
[ 196.160658] ? exc_invalid_op+0x19/0x80
[ 196.160675] ? asm_exc_invalid_op+0x1b/0x20
[ 196.160709] ? rcu_note_context_switch+0x43d/0x560
[ 196.160727] __schedule+0xb9/0x15f0
[ 196.160746] ? srso_alias_return_thunk+0x5/0x7f
[ 196.160765] ? srso_alias_return_thunk+0x5/0x7f
[ 196.160778] ? acpi_ns_search_one_scope+0xbe/0x270
[ 196.160806] schedule+0x68/0x110
[ 196.160820] schedule_timeout+0x151/0x160
[ 196.160829] ? srso_alias_return_thunk+0x5/0x7f
[ 196.160842] ? srso_alias_return_thunk+0x5/0x7f
[ 196.160855] ? acpi_ns_lookup+0x3c5/0xa90
[ 196.160878] __down_common+0xff/0x220
[ 196.160905] __down_timeout+0x16/0x30
[ 196.160920] down_timeout+0x64/0x70
[ 196.160938] acpi_os_wait_semaphore+0x85/0x200
[ 196.160959] acpi_ut_acquire_mutex+0x9e/0x280
[ 196.160979] acpi_ex_enter_interpreter+0x2d/0xb0
[ 196.160992] acpi_ns_evaluate+0x2f0/0x5f0
[ 196.161005] acpi_evaluate_object+0x172/0x490
[ 196.161018] ? acpi_os_signal_semaphore+0x8a/0xd0
[ 196.161038] acpi_evaluate_integer+0x52/0xe0
[ 196.161055] ? kfree+0x79/0x120
[ 196.161071] ? srso_alias_return_thunk+0x5/0x7f
[ 196.161089] acpi_ac_get_state.part.0+0x27/0x80
[ 196.161110] get_ac_property+0x5c/0x70
[ 196.161127] ? __pfx___power_supply_is_system_supplied+0x10/0x10
[ 196.161146] __power_supply_is_system_supplied+0x44/0xb0
[ 196.161166] class_for_each_device+0x124/0x160
[ 196.161184] ? acpi_ac_get_state.part.0+0x27/0x80
[ 196.161203] ? srso_alias_return_thunk+0x5/0x7f
[ 196.161223] power_supply_is_system_supplied+0x3c/0x70
[ 196.161243] amd_pmf_get_power_source+0xe/0x20 [amd_pmf]
[ 196.161276] amd_pmf_power_slider_update_event+0x49/0x90 [amd_pmf]
[ 196.161310] amd_pmf_pwr_src_notify_call+0xe7/0x100 [amd_pmf]
[ 196.161340] notifier_call_chain+0x5f/0xe0
[ 196.161362] atomic_notifier_call_chain+0x33/0x60
[ 196.161378] power_supply_changed_work+0x84/0x110
[ 196.161394] process_one_work+0x178/0x360
[ 196.161412] ? __pfx_worker_thread+0x10/0x10
[ 196.161424] worker_thread+0x307/0x430
[ 196.161440] ? __pfx_worker_thread+0x10/0x10
[ 196.161451] kthread+0xf4/0x130
[ 196.161467] ? __pfx_kthread+0x10/0x10
[ 196.161486] ret_from_fork+0x43/0x70
[ 196.161502] ? __pfx_kthread+0x10/0x10
[ 196.161518] ret_from_fork_asm+0x1b/0x30
[ 196.161558] </TASK>
[ 196.161562] ---[ end trace
0000000000000000 ]---
Since there's no guarantee that all the callbacks can work in atomic
context, switch to use blocking_notifier_call_chain to relax the
constraint.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Allen Zhong <allen@atr.me>
Fixes:
4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230913033233.602986-1-kai.heng.feng@canonical.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Al Viro [Fri, 15 Sep 2023 01:55:29 +0000 (21:55 -0400)]
ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
[ Upstream commit
dc32464a5fe4946fe1a4d8f8e29961dc411933c5 ]
Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Al Viro [Mon, 28 Aug 2023 22:47:31 +0000 (18:47 -0400)]
io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
[ Upstream commit
1939316bf988f3e49a07d9c4dd6f660bf4daa53d ]
->ki_pos value is unreliable in such cases. For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed. Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Mon, 23 Oct 2023 11:25:00 +0000 (22:25 +1100)]
powerpc/mm: Fix boot crash with FLATMEM
[ Upstream commit
daa9ada2093ed23d52b4c1fe6e13cf78f55cc85f ]
Erhard reported that his G5 was crashing with v6.6-rc kernels:
mpic: Setting up HT PICs workarounds for U3/U4
BUG: Unable to handle kernel data access at 0xfeffbb62ffec65fe
Faulting instruction address: 0xc00000000005dc40
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G T 6.6.0-rc3-PMacGS #1
Hardware name: PowerMac11,2 PPC970MP 0x440101 PowerMac
NIP:
c00000000005dc40 LR:
c000000000066660 CTR:
c000000000007730
REGS:
c0000000022bf510 TRAP: 0380 Tainted: G T (6.6.0-rc3-PMacGS)
MSR:
9000000000001032 <SF,HV,ME,IR,DR,RI> CR:
44004242 XER:
00000000
IRQMASK: 3
GPR00:
0000000000000000 c0000000022bf7b0 c0000000010c0b00 00000000000001ac
GPR04:
0000000003c80000 0000000000000300 c0000000f20001ae 0000000000000300
GPR08:
0000000000000006 feffbb62ffec65ff 0000000000000001 0000000000000000
GPR12:
9000000000001032 c000000002362000 c000000000f76b80 000000000349ecd8
GPR16:
0000000002367ba8 0000000002367f08 0000000000000006 0000000000000000
GPR20:
00000000000001ac c000000000f6f920 c0000000022cd985 000000000000000c
GPR24:
0000000000000300 00000003b0a3691d c0003e008030000e 0000000000000000
GPR28:
c00000000000000c c0000000f20001ee feffbb62ffec65fe 00000000000001ac
NIP hash_page_do_lazy_icache+0x50/0x100
LR __hash_page_4K+0x420/0x590
Call Trace:
hash_page_mm+0x364/0x6f0
do_hash_fault+0x114/0x2b0
data_access_common_virt+0x198/0x1f0
--- interrupt: 300 at mpic_init+0x4bc/0x10c4
NIP:
c000000002020a5c LR:
c000000002020a04 CTR:
0000000000000000
REGS:
c0000000022bf9f0 TRAP: 0300 Tainted: G T (6.6.0-rc3-PMacGS)
MSR:
9000000000001032 <SF,HV,ME,IR,DR,RI> CR:
24004248 XER:
00000000
DAR:
c0003e008030000e DSISR:
40000000 IRQMASK: 1
...
NIP mpic_init+0x4bc/0x10c4
LR mpic_init+0x464/0x10c4
--- interrupt: 300
pmac_setup_one_mpic+0x258/0x2dc
pmac_pic_init+0x28c/0x3d8
init_IRQ+0x90/0x140
start_kernel+0x57c/0x78c
start_here_common+0x1c/0x20
A bisect pointed to the breakage beginning with commit
9fee28baa601 ("powerpc:
implement the new page table range API").
Analysis of the oops pointed to a struct page with a corrupted
compound_head being loaded via page_folio() -> _compound_head() in
hash_page_do_lazy_icache().
The access by the mpic code is to an MMIO address, so the expectation
is that the struct page for that address would be initialised by
init_unavailable_range(), as pointed out by Aneesh.
Instrumentation showed that was not the case, which eventually lead to
the realisation that pfn_valid() was returning false for that address,
causing the struct page to not be initialised.
Because the system is using FLATMEM, the version of pfn_valid() in
memory_model.h is used:
static inline int pfn_valid(unsigned long pfn)
{
...
return pfn >= pfn_offset && (pfn - pfn_offset) < max_mapnr;
}
Which relies on max_mapnr being initialised. Early in boot max_mapnr is
zero meaning no PFNs are valid.
max_mapnr is initialised in mem_init() called via:
start_kernel()
mm_core_init() # init/main.c:928
mem_init()
But that is too late for the usage in init_unavailable_range() called via:
start_kernel()
setup_arch() # init/main.c:893
paging_init()
free_area_init()
init_unavailable_range()
Although max_mapnr is currently set in mem_init(), the value is actually
already available much earlier, as soon as mem_topology_setup() has
completed, which is also before paging_init() is called. So move the
initialisation there, which causes paging_init() to correctly initialise
the struct page and fixes the bug.
This bug seems to have been lurking for years, but went unnoticed
because the pre-folio code was inspecting the uninitialised page->flags
but not dereferencing it.
Thanks to Erhard and Aneesh for help debugging.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/
20230929132750.
3cd98452@yea/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023112500.1550208-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 20 Oct 2023 21:06:57 +0000 (14:06 -0700)]
r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en()
[ Upstream commit
bc65cc42af737a5a35f83842408ef2c6c79ba025 ]
If the adapter is unplugged while we're looping in r8153b_ups_en() /
r8153c_ups_en() we could end up looping for 10 seconds (20 ms * 500
loops). Add code similar to what's done in other places in the driver
to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 20 Oct 2023 21:06:56 +0000 (14:06 -0700)]
r8152: Check for unplug in rtl_phy_patch_request()
[ Upstream commit
dc90ba37a8c37042407fa6970b9830890cfe6047 ]
If the adapter is unplugged while we're looping in
rtl_phy_patch_request() we could end up looping for 10 seconds (2 ms *
5000 loops). Add code similar to what's done in other places in the
driver to check for unplug and bail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Su Hui [Fri, 20 Oct 2023 09:27:59 +0000 (17:27 +0800)]
net: chelsio: cxgb4: add an error code check in t4_load_phy_fw
[ Upstream commit
9f771493da935299c6393ad3563b581255d01a37 ]
t4_set_params_timeout() can return -EINVAL if failed, add check
for this.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Felix Kuehling [Mon, 17 Jul 2023 19:28:52 +0000 (15:28 -0400)]
drm/amdgpu: Reserve fences for VM update
[ Upstream commit
316baf09d355aec1179981b6dfe28eba50c5ee5b ]
In amdgpu_dma_buf_move_notify reserve fences for the page table updates
in amdgpu_vm_clear_freed and amdgpu_vm_handle_moved. This fixes a BUG_ON
in dma_resv_add_fence when using SDMA for page table updates.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liming Sun [Thu, 12 Oct 2023 23:02:35 +0000 (19:02 -0400)]
platform/mellanox: mlxbf-tmfifo: Fix a warning message
[ Upstream commit
99c09c985e5973c8f0ad976ebae069548dd86f12 ]
This commit fixes the smatch static checker warning in function
mlxbf_tmfifo_rxtx_word() which complains data not initialized at
line 634 when IS_VRING_DROP() is TRUE.
Signed-off-by: Liming Sun <limings@nvidia.com>
Link: https://lore.kernel.org/r/20231012230235.219861-1-limings@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phil Sutter [Wed, 11 Oct 2023 15:06:59 +0000 (17:06 +0200)]
netfilter: nf_tables: audit log object reset once per table
[ Upstream commit
1baf0152f7707c6c7e4ea815dcc1f431c0e603f9 ]
When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.
To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huacai Chen [Wed, 18 Oct 2023 00:42:52 +0000 (08:42 +0800)]
LoongArch: Replace kmap_atomic() with kmap_local_page() in copy_user_highpage()
[ Upstream commit
477a0ebec101359f49d92796e3b609857d564b52 ]
Replace kmap_atomic()/kunmap_atomic() calls with kmap_local_page()/
kunmap_local() in copy_user_highpage() which can be invoked from both
preemptible and atomic context [1].
[1] https://lore.kernel.org/all/
20201029222652.
302358281@linutronix.de/
Suggested-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Huacai Chen [Wed, 18 Oct 2023 00:42:52 +0000 (08:42 +0800)]
LoongArch: Export symbol invalid_pud_table for modules building
[ Upstream commit
449c2756c2323c9e32b2a2fa9c8b59ce91b5819d ]
Export symbol invalid_pud_table for modules building (such as the KVM
module) if 4-level page tables enabled. Otherwise we get:
ERROR: modpost: "invalid_pud_table" [arch/loongarch/kvm/kvm.ko] undefined!
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luben Tuikov [Tue, 17 Oct 2023 02:48:56 +0000 (22:48 -0400)]
gpu/drm: Eliminate DRM_SCHED_PRIORITY_UNSET
[ Upstream commit
fa8391ad68c16716e2c06ada397e99ceed2fb647 ]
Eliminate DRM_SCHED_PRIORITY_UNSET, value of -2, whose only user was
amdgpu. Furthermore, eliminate an index bug, in that when amdgpu boots, it
calls drm_sched_entity_init() with DRM_SCHED_PRIORITY_UNSET, which uses it to
index sched->sched_rq[].
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231017035656.8211-2-luben.tuikov@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luben Tuikov [Tue, 17 Oct 2023 02:24:39 +0000 (22:24 -0400)]
drm/amdgpu: Unset context priority is now invalid
[ Upstream commit
eab0261967aeab528db4d0a51806df8209aec179 ]
A context priority value of AMD_CTX_PRIORITY_UNSET is now invalid--instead of
carrying it around and passing it to the Direct Rendering Manager--and it
becomes AMD_CTX_PRIORITY_NORMAL in amdgpu_ctx_ioctl(), the gateway to context
creation.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231017035656.8211-1-luben.tuikov@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomas Henzl [Sun, 15 Oct 2023 11:45:29 +0000 (13:45 +0200)]
scsi: mpt3sas: Fix in error path
[ Upstream commit
e40c04ade0e2f3916b78211d747317843b11ce10 ]
The driver should be deregistered as misc driver after PCI registration
failure.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20231015114529.10725-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jorge Maidana [Fri, 6 Oct 2023 20:43:47 +0000 (17:43 -0300)]
fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()
[ Upstream commit
1022e7e2f40574c74ed32c3811b03d26b0b81daf ]
Delete the v86d netlink only after all the VBE tasks have been
completed.
Fixes initial state restore on module unload:
uvesafb: VBE state restore call failed (eax=0x4f04, err=-19)
Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 16 Oct 2023 11:19:52 +0000 (14:19 +0300)]
fbdev: omapfb: fix some error codes
[ Upstream commit
dc608db793731426938baa2f0e75a4a3cce5f5cf ]
Return negative -ENXIO instead of positive ENXIO.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Karolina Stolarek [Mon, 16 Oct 2023 12:15:25 +0000 (14:15 +0200)]
drm/ttm: Reorder sys manager cleanup step
[ Upstream commit
3b401e30c249849d803de6c332dad2a595a58658 ]
With the current cleanup flow, we could trigger a NULL pointer
dereference if there is a delayed destruction of a BO with a
system resource that gets executed on drain_workqueue() call,
as we attempt to free a resource using an already released
resource manager.
Remove the device from the device list and drain its workqueue
before releasing the system domain manager in ttm_device_fini().
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231016121525.2237838-1-karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roy Chateau [Fri, 13 Oct 2023 11:02:39 +0000 (13:02 +0200)]
ASoC: codecs: tas2780: Fix log of failed reset via I2C.
[ Upstream commit
4e9a429ae80657bdc502d3f5078e2073656ec5fd ]
Correctly log failures of reset via I2C.
Signed-off-by: Roy Chateau <roy.chateau@mep-info.com>
Link: https://lore.kernel.org/r/20231013110239.473123-1-roy.chateau@mep-info.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shuming Fan [Fri, 13 Oct 2023 09:45:25 +0000 (17:45 +0800)]
ASoC: rt5650: fix the wrong result of key button
[ Upstream commit
f88dfbf333b3661faff996bb03af2024d907b76a ]
The RT5650 should enable a power setting for button detection to avoid the wrong result.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuan-Wei Chiu [Sun, 24 Sep 2023 14:26:33 +0000 (22:26 +0800)]
efi: fix memory leak in krealloc failure handling
[ Upstream commit
0d3ad1917996839a5042d18f04e41915cfa1b74a ]
In the previous code, there was a memory leak issue where the
previously allocated memory was not freed upon a failed krealloc
operation. This patch addresses the problem by releasing the old memory
before setting the pointer to NULL in case of a krealloc failure. This
ensures that memory is properly managed and avoids potential memory
leaks.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Thu, 5 Oct 2023 08:53:08 +0000 (10:53 +0200)]
netfilter: nfnetlink_log: silence bogus compiler warning
[ Upstream commit
2e1d175410972285333193837a4250a74cd472e6 ]
net/netfilter/nfnetlink_log.c:800:18: warning: variable 'ctinfo' is uninitialized
The warning is bogus, the variable is only used if ct is non-NULL and
always initialised in that case. Init to 0 too to silence this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202309100514.ndBFebXN-lkp@intel.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
William A. Kennington III [Fri, 22 Sep 2023 18:28:12 +0000 (11:28 -0700)]
spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0
[ Upstream commit
2ec8b010979036c2fe79a64adb6ecc0bd11e91d1 ]
We don't want to use the value of ilog2(0) as dummy.buswidth is 0 when
dummy.nbytes is 0. Since we have no dummy bytes, we don't need to
configure the dummy byte bits per clock register value anyway.
Signed-off-by: "William A. Kennington III" <william@wkennington.com>
Link: https://lore.kernel.org/r/20230922182812.2728066-1-william@wkennington.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Su Hui [Mon, 25 Sep 2023 04:48:07 +0000 (12:48 +0800)]
fs/ntfs3: Avoid possible memory leak
[ Upstream commit
e4494770a5cad3c9d1d2a65ed15d07656c0d9b82 ]
smatch warn:
fs/ntfs3/fslog.c:2172 last_log_lsn() warn: possible memory leak of 'page_bufs'
Jump to label 'out' to free 'page_bufs' and is more consistent with
other code.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gabriel Marcano [Wed, 13 Sep 2023 04:50:32 +0000 (21:50 -0700)]
fs/ntfs3: Fix directory element type detection
[ Upstream commit
85a4780dc96ed9dd643bbadf236552b3320fae26 ]
Calling stat() from userspace correctly identified junctions in an NTFS
partition as symlinks, but using readdir() and iterating through the
directory containing the same junction did not identify the junction
as a symlink.
When emitting directory contents, check FILE_ATTRIBUTE_REPARSE_POINT
attribute to detect junctions and report them as links.
Signed-off-by: Gabriel Marcano <gabemarcano@yahoo.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Komarov [Tue, 26 Sep 2023 08:28:11 +0000 (11:28 +0300)]
fs/ntfs3: Fix NULL pointer dereference on error in attr_allocate_frame()
[ Upstream commit
9c689c8dc86f8ca99bf91c05f24c8bab38fe7d5f ]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Komarov [Tue, 26 Sep 2023 08:19:08 +0000 (11:19 +0300)]
fs/ntfs3: Fix possible NULL-ptr-deref in ni_readpage_cmpr()
[ Upstream commit
32e9212256b88f35466642f9c939bb40cfb2c2de ]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Komarov [Fri, 30 Jun 2023 12:12:58 +0000 (16:12 +0400)]
fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)
[ Upstream commit
fc471e39e38fea6677017cbdd6d928088a59fc67 ]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Komarov [Fri, 30 Jun 2023 11:57:19 +0000 (15:57 +0400)]
fs/ntfs3: Write immediately updated ntfs state
[ Upstream commit
06ccfb00645990a9fcc14249e6d1c25921ecb836 ]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konstantin Komarov [Fri, 30 Jun 2023 11:52:19 +0000 (15:52 +0400)]
fs/ntfs3: Add ckeck in ni_update_parent()
[ Upstream commit
87d1888aa40f25773fa0b948bcb2545f97e2cb15 ]
Check simple case when parent inode equals current inode.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 21 Sep 2023 11:04:21 +0000 (19:04 +0800)]
fbdev: atyfb: only use ioremap_uc() on i386 and ia64
[ Upstream commit
c1a8d1d0edb71dec15c9649cb56866c71c1ecd9e ]
ioremap_uc() is only meaningful on old x86-32 systems with the PAT
extension, and on ia64 with its slightly unconventional ioremap()
behavior, everywhere else this is the same as ioremap() anyway.
Change the only driver that still references ioremap_uc() to only do so
on x86-32/ia64 in order to allow removing that interface at some
point in the future for the other architectures.
On some architectures, ioremap_uc() just returns NULL, changing
the driver to call ioremap() means that they now have a chance
of working correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Sat, 14 Oct 2023 00:29:57 +0000 (17:29 -0700)]
Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
[ Upstream commit
5030b2fe6aab37fe42d14f31842ea38be7c55c57 ]
Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in
92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.
Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Mon, 25 Sep 2023 15:55:51 +0000 (17:55 +0200)]
powerpc/85xx: Fix math emulation exception
[ Upstream commit
8e8a12ecbc86700b5e1a3596ce2b3c43dafad336 ]
Booting mpc85xx_defconfig kernel on QEMU leads to:
Bad trap at PC: fe9bab0, SR: 2d000, vector=800
awk[82]: unhandled trap (5) at 0 nip fe9bab0 lr fe9e01c code 5 in libc-2.27.so[fe5a000+17a000]
awk[82]: code:
3aa00000 3a800010 4bffe03c 9421fff0 7ca62b78 38a00000 93c10008 83c10008
awk[82]: code:
38210010 4bffdec8 9421ffc0 7c0802a6 <
fc00048e>
d8010008 4815190d 93810030
Trace/breakpoint trap
WARNING: no useful console
This is because allthough CONFIG_MATH_EMULATION is selected,
Exception 800 calls unknown_exception().
Call emulation_assist_interrupt() instead.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/066caa6d9480365da9b8ed83692d7101e10ac5f8.1695657339.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Shurong [Thu, 5 Oct 2023 14:28:35 +0000 (22:28 +0800)]
dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
[ Upstream commit
0618c077a8c20e8c81e367988f70f7e32bb5a717 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
We fix it by calling pm_runtime_disable when error returns.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/tencent_DD2D371DB5925B4B602B1E1D0A5FA88F1208@qq.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Wolsieffer [Tue, 3 Oct 2023 16:20:03 +0000 (12:20 -0400)]
irqchip/stm32-exti: add missing DT IRQ flag translation
[ Upstream commit
8554cba1d6dbd3c74e0549e28ddbaccbb1d6b30a ]
The STM32F4/7 EXTI driver was missing the xlate callback, so IRQ trigger
flags specified in the device tree were being ignored. This was
preventing the RTC alarm interrupt from working, because it must be set
to trigger on the rising edge to function correctly.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003162003.1649967-1-ben.wolsieffer@hefring.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anup Patel [Tue, 3 Oct 2023 04:43:51 +0000 (10:13 +0530)]
irqchip/riscv-intc: Mark all INTC nodes as initialized
[ Upstream commit
e13cd66bd821be417c498a34928652db4ac6b436 ]
The RISC-V INTC local interrupts are per-HART (or per-CPU) so we
create INTC IRQ domain only for the INTC node belonging to the boot
HART. This means only the boot HART INTC node will be marked as
initialized and other INTC nodes won't be marked which results
downstream interrupt controllers (such as PLIC, IMSIC and APLIC
direct-mode) not being probed due to missing device suppliers.
To address this issue, we mark all INTC node for which we don't
create IRQ domain as initialized.
Reported-by: Dmitry Dunaev <dunaev@tecon.ru>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230926102801.1591126-1-dunaev@tecon.ru
Link: https://lore.kernel.org/r/20231003044403.1974628-4-apatel@ventanamicro.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Wed, 4 Oct 2023 13:19:37 +0000 (15:19 +0200)]
net: sched: cls_u32: Fix allocation size in u32_init()
[ Upstream commit
c4d49196ceec80e30e8d981410d73331b49b7850 ]
commit
d61491a51f7e ("net/sched: cls_u32: Replace one-element array
with flexible-array member") incorrecly replaced an instance of
`sizeof(*tp_c)` with `struct_size(tp_c, hlist->ht, 1)`. This results
in a an over-allocation of 8 bytes.
This change is wrong because `hlist` in `struct tc_u_common` is a
pointer:
net/sched/cls_u32.c:
struct tc_u_common {
struct tc_u_hnode __rcu *hlist;
void *ptr;
int refcnt;
struct idr handle_idr;
struct hlist_node hnode;
long knodes;
};
So, the use of `struct_size()` makes no sense: we don't need to allocate
any extra space for a flexible-array member. `sizeof(*tp_c)` is just fine.
So, `struct_size(tp_c, hlist->ht, 1)` translates to:
sizeof(*tp_c) + sizeof(tp_c->hlist->ht) ==
sizeof(struct tc_u_common) + sizeof(struct tc_u_knode *) ==
144 + 8 == 0x98 (byes)
^^^
|
unnecessary extra
allocation size
$ pahole -C tc_u_common net/sched/cls_u32.o
struct tc_u_common {
struct tc_u_hnode * hlist; /* 0 8 */
void * ptr; /* 8 8 */
int refcnt; /* 16 4 */
/* XXX 4 bytes hole, try to pack */
struct idr handle_idr; /* 24 96 */
/* --- cacheline 1 boundary (64 bytes) was 56 bytes ago --- */
struct hlist_node hnode; /* 120 16 */
/* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */
long int knodes; /* 136 8 */
/* size: 144, cachelines: 3, members: 6 */
/* sum members: 140, holes: 1, sum holes: 4 */
/* last cacheline: 16 bytes */
};
And with `sizeof(*tp_c)`, we have:
sizeof(*tp_c) == sizeof(struct tc_u_common) == 144 == 0x90 (bytes)
which is the correct and original allocation size.
Fix this issue by replacing `struct_size(tp_c, hlist->ht, 1)` with
`sizeof(*tp_c)`, and avoid allocating 8 too many bytes.
The following difference in binary output is expected and reflects the
desired change:
| net/sched/cls_u32.o
| @@ -6148,7 +6148,7 @@
| include/linux/slab.h:599
| 2cf5: mov 0x0(%rip),%rdi # 2cfc <u32_init+0xfc>
| 2cf8: R_X86_64_PC32 kmalloc_caches+0xc
|- 2cfc: mov $0x98,%edx
|+ 2cfc: mov $0x90,%edx
Reported-by: Alejandro Colomar <alx@kernel.org>
Closes: https://lore.kernel.org/lkml/
09b4a2ce-da74-3a19-6961-
67883f634d98@kernel.org/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Antoine Gennart [Fri, 29 Sep 2023 13:01:17 +0000 (15:01 +0200)]
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
[ Upstream commit
e930bea4124b8a4a47ba4092d99da30099b9242d ]
The micbias setting for tlv320adc can also have the value '3' which
means that the micbias ouput pin is connected to the input pin AVDD.
Signed-off-by: Antoine Gennart <gennartan@disroot.org>
Link: https://lore.kernel.org/r/20230929130117.77661-1-gennartan@disroot.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suzuki K Poulose [Thu, 17 Aug 2023 16:19:51 +0000 (17:19 +0100)]
coresight: tmc-etr: Disable warnings for allocation failures
[ Upstream commit
e5028011885a85032aa3c1b7e3e493bcdacb4a0a ]
Running the following command on Juno triggers the warning:
$ perf record -e cs_etm// -m ,128M ...
------------[ cut here ]------------
WARNING: CPU: 1 PID: 412 at mm/page_alloc.c:4453 __alloc_pages+0x334/0x1420
CPU: 1 PID: 412 Comm: perf Not tainted 6.5.0-rc3+ #181
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
pstate:
20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __alloc_pages+0x334/0x1420
lr : dma_common_alloc_pages+0x108/0x138
sp :
ffffffc087fb7440
x29:
ffffffc087fb7440 x28:
0000000000000000 x27:
ffffffc07e48fba0
x26:
0000000000000001 x25:
000000000000000f x24:
ffffffc081f24880
x23:
0000000000000cc0 x22:
ffffff88012b6f08 x21:
0000000008000000
x20:
ffffff8801433000 x19:
0000000000000000 x18:
0000000000000000
x17:
ffffffc080316e5c x16:
ffffffc07e46406c x15:
ffffffc0803af580
x14:
ffffffc08036b460 x13:
ffffffc080025cbc x12:
ffffffb8108c3fc4
x11:
1ffffff8108c3fc3 x10:
1ffffff810ff6eac x9 :
00000000f204f204
x8 :
000000000000f204 x7 :
00000000f2f2f2f2 x6 :
00000000f3f3f3f3
x5 :
0000000000000001 x4 :
0000000000000000 x3 :
0000000000000000
x2 :
0000000000000cc0 x1 :
0000000000000000 x0 :
ffffffc085333000
Call trace:
__alloc_pages+0x334/0x1420
dma_common_alloc_pages+0x108/0x138
__dma_alloc_pages+0xf4/0x108
dma_alloc_pages+0x18/0x30
tmc_etr_alloc_flat_buf+0xa0/0x190 [coresight_tmc]
tmc_alloc_etr_buf.constprop.0+0x124/0x298 [coresight_tmc]
alloc_etr_buf.constprop.0.isra.0+0x88/0xc8 [coresight_tmc]
tmc_alloc_etr_buffer+0x164/0x2f0 [coresight_tmc]
etm_setup_aux+0x32c/0x520 [coresight]
rb_alloc_aux+0x29c/0x3f8
perf_mmap+0x59c/0xce0
mmap_region+0x340/0x10e0
do_mmap+0x48c/0x580
vm_mmap_pgoff+0x160/0x248
ksys_mmap_pgoff+0x1e8/0x278
__arm64_sys_mmap+0x8c/0xb8
With the flat mode, we only attempt to allocate large memory if there is an IOMMU
connected to the ETR. If the allocation fails, we always have a fallback path
and return an error if nothing else worked. So, suppress the warning for flat
mode allocations.
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20230817161951.658534-1-suzuki.poulose@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuninori Morimoto [Tue, 19 Sep 2023 05:34:18 +0000 (05:34 +0000)]
ASoC: simple-card: fixup asoc_simple_probe() error handling
[ Upstream commit
41bae58df411f9accf01ea660730649b2fab1dab ]
asoc_simple_probe() is used for both "DT probe" (A) and "platform probe"
(B). It uses "goto err" when error case, but it is not needed for
"platform probe" case (B). Thus it is using "return" directly there.
static int asoc_simple_probe(...)
{
^ if (...) {
| ...
(A) if (ret < 0)
| goto err;
v } else {
^ ...
| if (ret < 0)
(B) return -Exxx;
v }
...
^ if (ret < 0)
(C) goto err;
v ...
err:
(D) simple_util_clean_reference(card);
return ret;
}
Both case are using (C) part, and it calls (D) when err case.
But (D) will do nothing for (B) case.
Because of these behavior, current code itself is not wrong,
but is confusable, and more, static analyzing tool will warning on
(B) part (should use goto err).
To avoid static analyzing tool warning, this patch uses "goto err"
on (B) part.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7hy7mlh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Thu, 2 Nov 2023 08:35:33 +0000 (09:35 +0100)]
Linux 6.1.61
Link: https://lore.kernel.org/r/20231031165918.608547597@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Sperbeck [Sat, 28 Oct 2023 18:41:31 +0000 (18:41 +0000)]
objtool/x86: add missing embedded_insn check
When
dbf460087755 ("objtool/x86: Fixup frame-pointer vs rethunk")
was backported to some stable branches, the check for dest->embedded_insn
in is_special_call() was missed. The result is that the warning it
was intended to suppress still appears. For example on 6.1 (on kernels
before 6.1, the '-s' argument would instead be 'check'):
$ tools/objtool/objtool -s arch/x86/lib/retpoline.o
arch/x86/lib/retpoline.o: warning: objtool: srso_untrain_ret+0xd:
call without frame pointer save/setup
With this patch, the warning is correctly suppressed, and the
kernel still passes the normal Google kernel developer tests.
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Sat, 28 Oct 2023 06:47:49 +0000 (14:47 +0800)]
ext4: avoid overlapping preallocations due to overflow
commit
bedc5d34632c21b5adb8ca7143d4c1f794507e4c upstream.
Let's say we want to allocate 2 blocks starting from
4294966386, after
predicting the file size, start is aligned to
4294965248, len is changed
to 2048, then end = start + size = 0x100000000. Since end is of
type ext4_lblk_t, i.e. uint, end is truncated to 0.
This causes (pa->pa_lstart >= end) to always hold when checking if the
current extent to be allocated crosses already preallocated blocks, so the
resulting ac_g_ex may cross already preallocated blocks. Hence we convert
the end type to loff_t and use pa_logical_end() to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Sat, 28 Oct 2023 06:47:48 +0000 (14:47 +0800)]
ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow
commit
bc056e7163ac7db945366de219745cf94f32a3e6 upstream.
When we calculate the end position of ext4_free_extent, this position may
be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if
ac_g_ex.fe_logical is
4294965248 and ac_orig_goal_len is 2048, then the
computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not
the first case of adjusting the best extent, that is, new_bex_end > 0, the
following BUG_ON will be triggered:
=========================================================
kernel BUG at fs/ext4/mballoc.c:5116!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279
RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430
Call Trace:
<TASK>
ext4_mb_use_best_found+0x203/0x2f0
ext4_mb_try_best_found+0x163/0x240
ext4_mb_regular_allocator+0x158/0x1550
ext4_mb_new_blocks+0x86a/0xe10
ext4_ext_map_blocks+0xb0c/0x13a0
ext4_map_blocks+0x2cd/0x8f0
ext4_iomap_begin+0x27b/0x400
iomap_iter+0x222/0x3d0
__iomap_dio_rw+0x243/0xcb0
iomap_dio_rw+0x16/0x80
=========================================================
A simple reproducer demonstrating the problem:
mkfs.ext4 -F /dev/sda -b 4096 100M
mount /dev/sda /tmp/test
fallocate -l1M /tmp/test/tmp
fallocate -l10M /tmp/test/file
fallocate -i -o 1M -l16777203M /tmp/test/file
fsstress -d /tmp/test -l 0 -n 100000 -p 8 &
sleep 10 && killall -9 fsstress
rm -f /tmp/test/tmp
xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"
We simply refactor the logic for adjusting the best extent by adding
a temporary ext4_free_extent ex and use extent_logical_end() to avoid
overflow, which also simplifies the code.
Cc: stable@kernel.org # 6.4
Fixes:
93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baokun Li [Sat, 28 Oct 2023 06:47:47 +0000 (14:47 +0800)]
ext4: add two helper functions extent_logical_end() and pa_logical_end()
commit
43bbddc067883d94de7a43d5756a295439fbe37d upstream.
When we use lstart + len to calculate the end of free extent or prealloc
space, it may exceed the maximum value of
4294967295(0xffffffff) supported
by ext4_lblk_t and cause overflow, which may lead to various problems.
Therefore, we add two helper functions, extent_logical_end() and
pa_logical_end(), to limit the type of end to loff_t, and also convert
lstart to loff_t for calculation to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Lazar [Wed, 25 Oct 2023 19:30:16 +0000 (21:30 +0200)]
platform/x86: Add s2idle quirk for more Lenovo laptops
commit
3bde7ec13c971445faade32172cb0b4370b841d9 upstream.
When suspending to idle and resuming on some Lenovo laptops using the
Mendocino APU, multiple NVME IOMMU page faults occur, showing up in
dmesg as repeated errors:
nvme 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000b
address=0xb6674000 flags=0x0000]
The system is unstable afterwards.
Applying the s2idle quirk introduced by commit
455cd867b85b ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
allows these systems to work with the IOMMU enabled and s2idle
resume to work.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218024
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/ZTlsyOaFucF2pWrL@localhost
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alessandro Carminati [Thu, 21 Sep 2023 07:32:17 +0000 (07:32 +0000)]
clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name
commit
ceb87a361d0b079ecbc7d2831618c19087f304a9 upstream.
In the possible_parent_show function, ensure proper handling of the return
value from of_clk_get_parent_name to prevent potential issues arising from
a NULL return.
The current implementation invokes seq_puts directly on the result of
of_clk_get_parent_name without verifying the return value, which can lead
to kernel panic if the function returns NULL.
This patch addresses the concern by introducing a check on the return
value of of_clk_get_parent_name. If the return value is not NULL, the
function proceeds to call seq_puts, providing the returned value as
argument.
However, if of_clk_get_parent_name returns NULL, the function provides a
static string as argument, avoiding the panic.
Fixes:
1ccc0ddf046a ("clk: Use seq_puts() in possible_parent_show()")
Reported-by: Philip Daly <pdaly@redhat.com>
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Link: https://lore.kernel.org/r/20230921073217.572151-1-alessandro.carminati@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 22 Oct 2023 23:34:28 +0000 (19:34 -0400)]
sparc32: fix a braino in fault handling in csum_and_copy_..._user()
commit
1f36cd05e0081f2c75769a551d584c4ffb2a5660 upstream.
Fault handler used to make non-trivial calls, so it needed
to set a stack frame up. Used to be
save ... - grab a stack frame, old %o... become %i...
....
ret - go back to address originally in %o7, currently %i7
restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since
ab5e8b331244 and that code should
have become
retl - go back to address in %o7
clr %o0 - have return value set to 0
What it had become instead was
ret - go back to address in %i7 - return address of *caller*
clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter(). Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Fixes:
ab5e8b331244 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Tue, 24 Oct 2023 09:42:21 +0000 (11:42 +0200)]
perf/core: Fix potential NULL deref
commit
a71ef31485bb51b846e8db8b3a35e432cc15afb5 upstream.
Smatch is awesome.
Fixes:
32671e3799ca ("perf: Disallow mis-matched inherited group reads")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tony Luck [Wed, 25 Oct 2023 20:25:13 +0000 (13:25 -0700)]
x86/cpu: Add model number for Intel Arrow Lake mobile processor
commit
b99d70c0d1380f1368fd4a82271280c4fd28558b upstream.
For "reasons" Intel has code-named this CPU with a "_H" suffix.
[ dhansen: As usual, apply this and send it upstream quickly to
make it easier for anyone who is doing work that
consumes this. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231025202513.12358-1-tony.luck%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Wed, 25 Oct 2023 21:04:15 +0000 (23:04 +0200)]
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
commit
128b0c9781c9f2651bea163cb85e52a6c7be0f9e upstream.
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes:
e179f6914152 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Fan [Fri, 13 Oct 2023 12:49:03 +0000 (13:49 +0100)]
nvmem: imx: correct nregs for i.MX6UL
commit
7d6e10f5d254681983b53d979422c8de3fadbefb upstream.
The nregs for i.MX6UL should be 144 per fuse map, correct it.
Fixes:
4aa2b4802046 ("nvmem: octop: Add support for imx6ul")
Cc: Stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013124904.175782-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Fan [Fri, 13 Oct 2023 12:49:02 +0000 (13:49 +0100)]
nvmem: imx: correct nregs for i.MX6SLL
commit
414a98abbefd82d591f4e2d1efd2917bcd3b6f6d upstream.
The nregs for i.MX6SLL should be 80 per fuse map, correct it.
Fixes:
6da27821a6f5 ("nvmem: imx-ocotp: add support for imx6sll")
Cc: Stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013124904.175782-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peng Fan [Fri, 13 Oct 2023 12:49:04 +0000 (13:49 +0100)]
nvmem: imx: correct nregs for i.MX6ULL
commit
2382c1b044231fd49eaf9aa82bc7113fc55487b8 upstream.
The nregs for i.MX6ULL should be 80 per fuse map, correct it.
Fixes:
ffbc34bf0e9c ("nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support")
Cc: Stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013124904.175782-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ekansh Gupta [Fri, 13 Oct 2023 12:20:07 +0000 (13:20 +0100)]
misc: fastrpc: Unmap only if buffer is unmapped from DSP
commit
509143385db364c67556a914bef6c9a42fd2c74c upstream.
For unmapping any buffer from kernel, it should first be unmapped
from DSP. In case unmap from DSP request fails, the map should not
be removed from kernel as it might lead to SMMU faults and other
memory issues.
Fixes:
5c1b97c7d7b7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ekansh Gupta [Fri, 13 Oct 2023 12:20:06 +0000 (13:20 +0100)]
misc: fastrpc: Clean buffers on remote invocation failures
commit
1c8093591d1e372d700fe65423e7315a8ecf721b upstream.
With current design, buffers and dma handles are not freed in case
of remote invocation failures returned from DSP. This could result
in buffer leakings and dma handle pointing to wrong memory in the
fastrpc kernel. Adding changes to clean buffers and dma handles
even when remote invocation to DSP returns failures.
Fixes:
c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ekansh Gupta [Fri, 13 Oct 2023 12:20:05 +0000 (13:20 +0100)]
misc: fastrpc: Free DMA handles for RPC calls with no arguments
commit
206484303892a2a36c0c3414030ddfef658a4e70 upstream.
The FDs for DMA handles to be freed is updated in fdlist by DSP over
a remote call. This holds true even for remote calls with no
arguments. To handle this, get_args and put_args are needed to
be called for remote calls with no arguments also as fdlist
is allocated in get_args and FDs updated in fdlist is freed
in put_args.
Fixes:
8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ekansh Gupta [Fri, 13 Oct 2023 12:20:04 +0000 (13:20 +0100)]
misc: fastrpc: Reset metadata buffer to avoid incorrect free
commit
1c29d80134ac116e0196c7bad58a2121381b679c upstream.
Metadata buffer is allocated during get_args for any remote call.
This buffer carries buffers, fdlists and other payload information
for the call. If the buffer is not reset, put_args might find some
garbage FDs in the fdlist which might have an existing mapping in
the list. This could result in improper freeing of FD map when DSP
might still be using the buffer. Added change to reset the metadata
buffer after allocation.
Fixes:
8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231013122007.174464-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yujie Liu [Fri, 27 Oct 2023 04:13:14 +0000 (12:13 +0800)]
tracing/kprobes: Fix the description of variable length arguments
commit
e0f831836cead677fb07d54bd6bf499df35640c2 upstream.
Fix the following kernel-doc warnings:
kernel/trace/trace_kprobe.c:1029: warning: Excess function parameter 'args' description in '__kprobe_event_gen_cmd_start'
kernel/trace/trace_kprobe.c:1097: warning: Excess function parameter 'args' description in '__kprobe_event_add_fields'
Refer to the usage of variable length arguments elsewhere in the kernel
code, "@..." is the proper way to express it in the description.
Link: https://lore.kernel.org/all/20231027041315.2613166-1-yujie.liu@intel.com/
Fixes:
2a588dd1d5d6 ("tracing: Add kprobe event command generation functions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202310190437.paI6LYJF-lkp@intel.com/
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian Zhang [Fri, 6 Oct 2023 02:22:33 +0000 (10:22 +0800)]
i2c: aspeed: Fix i2c bus hang in slave read
commit
54f1840ddee9bbdc8dd89fbbfdfa632401244146 upstream.
When the `CONFIG_I2C_SLAVE` option is enabled and the device operates
as a slave, a situation arises where the master sends a START signal
without the accompanying STOP signal. This action results in a
persistent I2C bus timeout. The core issue stems from the fact that
the i2c controller remains in a slave read state without a timeout
mechanism. As a consequence, the bus perpetually experiences timeouts.
In this case, the i2c bus will be reset, but the slave_state reset is
missing.
Fixes:
fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs")
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alain Volmat [Tue, 10 Oct 2023 08:44:54 +0000 (10:44 +0200)]
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
commit
c896ff2dd8f30a6b0a922c83a96f6d43f05f0e92 upstream.
In case of SMBUS byte read with PEC enabled, the whole transfer
is split into two commands. A first write command, followed by
a read command. The write command does not have any PEC byte
and a PEC byte is appended at the end of the read command.
(cf Read byte protocol with PEC in SMBUS specification)
Within the STM32 I2C controller, handling (either sending
or receiving) of the PEC byte is done via the PECBYTE bit in
register CR2.
Currently, the PECBYTE is set at the beginning of a transfer,
which lead to sending a PEC byte at the end of the write command
(hence losing the real last byte), and also does not check the
PEC byte received during the read command.
This patch corrects the function stm32f7_i2c_smbus_xfer_msg
in order to only set the PECBYTE during the read command.
Fixes:
9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herve Codina [Fri, 20 Oct 2023 15:30:12 +0000 (17:30 +0200)]
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
commit
0fb118de5003028ad092a4e66fc6d07b86c3bc94 upstream.
i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes:
50a5ba876908 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herve Codina [Fri, 20 Oct 2023 15:30:13 +0000 (17:30 +0200)]
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
commit
3dc0ec46f6e7511fc4fdf6b6cda439382bc957f1 upstream.
i2c-mux-gpmux uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes:
ac8498f0ce53 ("i2c: i2c-mux-gpmux: new driver")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Herve Codina [Fri, 20 Oct 2023 15:30:11 +0000 (17:30 +0200)]
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
commit
3171d37b58a76e1febbf3f4af2d06234a98cf88b upstream.
i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() /
i2c_put_adapter(). These pair alone is not correct to properly lock the
I2C parent adapter.
Indeed, i2c_put_adapter() decrements the module refcount while
of_find_i2c_adapter_by_node() does not increment it. This leads to an
underflow of the parent module refcount.
Use the dedicated function, of_get_i2c_adapter_by_node(), to handle
correctly the module refcount.
Fixes:
c4aee3e1b0de ("i2c: mux: pinctrl: remove platform_data")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Fri, 15 Sep 2023 00:10:19 +0000 (18:10 -0600)]
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
commit
e2bd8c28b9bd835077eb65715d416d667694a80d upstream.
The driver was previously using offset and scale values for the
temperature sensor readings which were only valid for 7-series devices.
Add per-device-type values for offset and scale and set them appropriately
for each device type.
Note that the values used for the UltraScale family are for UltraScale+
(i.e. the SYSMONE4 primitive) using the internal reference, as that seems
to be the most common configuration and the device tree values Xilinx's
device tree generator produces don't seem to give us anything to tell us
which configuration is used. However, the differences within the UltraScale
family seem fairly minor and it's closer than using the 7-series values
instead in any case.
Fixes:
c2b7720a7905 ("iio: xilinx-xadc: Add basic support for Ultrascale System Monitor")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-3-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Fri, 15 Sep 2023 00:10:18 +0000 (18:10 -0600)]
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
commit
8d6b3ea4d9eaca80982442b68a292ce50ce0a135 upstream.
In the probe function, the driver was reading out the thresholds already
set in the core, which can be configured by the user in the Vivado tools
when the FPGA image is built. However, it later clobbered those values
with zero or maximum values. In particular, the overtemperature shutdown
threshold register was overwritten with the max value, which effectively
prevents the FPGA from shutting down when the desired threshold was
eached, potentially risking hardware damage in that case.
Remove this code to leave the preconfigured default threshold values
intact.
The code was also disabling all alarms regardless of what enable state
they were left in by the FPGA image, including the overtemperature
shutdown feature. Leave these bits in their original state so they are
not unconditionally disabled.
Fixes:
bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Tested-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://lore.kernel.org/r/20230915001019.2862964-2-robert.hancock@calian.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Mon, 9 Oct 2023 10:14:12 +0000 (12:14 +0200)]
iio: exynos-adc: request second interupt only when touchscreen mode is used
commit
865b080e3229102f160889328ce2e8e97aa65ea0 upstream.
Second interrupt is needed only when touchscreen mode is used, so don't
request it unconditionally. This removes the following annoying warning
during boot:
exynos-adc
14d10000.adc: error -ENXIO: IRQ index 1 not found
Fixes:
2bb8ad9b44c5 ("iio: exynos-adc: add experimental touchscreen support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20231009101412.916922-1-m.szyprowski@samsung.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Sat, 2 Sep 2023 19:46:20 +0000 (21:46 +0200)]
iio: afe: rescale: Accept only offset channels
commit
bee448390e5166d019e9e037194d487ee94399d9 upstream.
As noted by Jonathan Cameron: it is perfectly legal for a channel
to have an offset but no scale in addition to the raw interface.
The conversion will imply that scale is 1:1.
Make rescale_configure_channel() accept just scale, or just offset
to process a channel.
When a user asks for IIO_CHAN_INFO_OFFSET in rescale_read_raw()
we now have to deal with the fact that OFFSET could be present
but SCALE missing. Add code to simply scale 1:1 in this case.
Link: https://lore.kernel.org/linux-iio/CACRpkdZXBjHU4t-GVOCFxRO-AHGxKnxMeHD2s4Y4PuC29gBq6g@mail.gmail.com/
Fixes:
53ebee949980 ("iio: afe: iio-rescale: Support processed channels")
Fixes:
9decacd8b3a4 ("iio: afe: rescale: Fix boolean logic bug")
Reported-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20230902-iio-rescale-only-offset-v2-1-988b807754c8@linaro.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Sat, 28 Oct 2023 13:30:27 +0000 (07:30 -0600)]
io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid
commit
7644b1a1c9a7ae8ab99175989bfc8676055edb46 upstream.
We could race with SQ thread exit, and if we do, we'll hit a NULL pointer
dereference when the thread is cleared. Grab the SQPOLL data lock before
attempting to get the task cpu and pid for fdinfo, this ensures we have a
stable view of it.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218032
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haibo Li [Mon, 9 Oct 2023 07:37:48 +0000 (15:37 +0800)]
kasan: print the original fault addr when access invalid shadow
commit
babddbfb7d7d70ae7f10fedd75a45d8ad75fdddf upstream.
when the checked address is illegal,the corresponding shadow address from
kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow
address causes kernel oops. Here is a sample about oops on arm64(VA
39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on:
[
ffffffb80aaaaaaa] pgd=
000000005d3ce003, p4d=
000000005d3ce003,
pud=
000000005d3ce003, pmd=
0000000000000000
Internal error: Oops:
0000000096000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43
Hardware name: linux,dummy-virt (DT)
pstate:
80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __hwasan_load8_noabort+0x5c/0x90
lr : do_ib_ob+0xf4/0x110
ffffffb80aaaaaaa is the shadow address for
efffff80aaaaaaaa.
The problem is reading invalid shadow in kasan_check_range.
The generic kasan also has similar oops.
It only reports the shadow address which causes oops but not
the original address.
Commit
2f004eea0fc8("x86/kasan: Print original address on #GP")
introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE.
This patch extends it to KASAN_OUTLINE mode.
Link: https://lkml.kernel.org/r/20231009073748.159228-1-haibo.li@mediatek.com
Fixes:
2f004eea0fc8("x86/kasan: Print original address on #GP")
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-starfive.git / log