Ville Syrjälä [Mon, 7 Sep 2015 15:22:56 +0000 (18:22 +0300)]
drm: Make some modes const when iterating through them
valid_inferred_mode() don't change the modes over which it iterates,
so make the iterator const.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 27 Aug 2015 14:23:30 +0000 (17:23 +0300)]
drm/dp: Use I2C_WRITE_STATUS_UPDATE to drain partial I2C_WRITE requests
When an i2c WRITE gets an i2c defer or short i2c ack reply, we are
supposed to switch the request from I2C_WRITE to I2C_WRITE_STATUS_UPDATE
when we continue to poll for the completion of the request.
v2: Don't assume DP_AUX_I2C_WRITE is 0 even though it is, to make the
code more obvious to the casual reader (Jani)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Resolve conflict due to changed context.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 27 Aug 2015 14:23:29 +0000 (17:23 +0300)]
drm/tegra: Handle I2C_WRITE_STATUS_UPDATE for address only writes
A address-only I2C_WRITE can't be replied with a short i2c ack, but I
suppose it could be replied with an i2c defer. So the code should be
prepared for an address-only I2C_WRITE_STATUS_UPDATE.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: "Terje Bergström" <tbergstrom@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 27 Aug 2015 14:23:28 +0000 (17:23 +0300)]
drm/radeon: Handle DP_AUX_I2C_WRITE_STATUS_UPDATE
When we get an i2c defer or short ack for i2c-over-aux write we need
to switch to WRITE_STATUS_UPDATE to poll for the completion of the
original request.
Looks like radeon doesn't do anything special with the request type,
so hopefully just treating it the same as a i2c write is enough.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 27 Aug 2015 14:23:27 +0000 (17:23 +0300)]
drm/i915: Handle DP_AUX_I2C_WRITE_STATUS_UPDATE
When we get an i2c defer or short ack for i2c-over-aux write we need
to switch to WRITE_STATUS_UPDATE to poll for the completion of the
original request.
i915 doesn't try to interpret wht request type apart from separating
reads from writes, and so we should be able to treat this the same as
a normal i2c write.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Ville Syrjälä [Thu, 27 Aug 2015 14:23:26 +0000 (17:23 +0300)]
drm/dp: s/I2C_STATUS/I2C_WRITE_STATUS_UPDATE/
Rename the I2C_STATUS request to I2C_WRITE_STATUS_UPDATE to match the
spec.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Thierry Reding [Tue, 8 Sep 2015 13:00:45 +0000 (15:00 +0200)]
drm/atomic-helper: Implement drm_atomic_helper_duplicate_state()
This function can be used to duplicate an atomic state object. This is
useful for example to implement suspend/resume, where the state before
suspend can be saved and restored upon resume.
v2: move locking to caller, be more explicit about prerequisites
v3: explicitly pass lock acquisition context, improve kerneldoc
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 8 Sep 2015 11:52:45 +0000 (13:52 +0200)]
drm/atomic-helper: Pimp docs with recommendations for rpm drivers
Requested by Laurent.
Note that this uses the new markdown support which will only land in
kernel 4.4 (for the code snippet).
v2: A few spelling fixes I spotted myself.
v3: Big reword for commit_planes() kerneldoc based on a text from
Laurent.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com> (v1 on irc)
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Tue, 8 Sep 2015 10:02:07 +0000 (12:02 +0200)]
drm/atomic-helper: Add option to update planes only on active crtc
With drivers supporting runtime pm it's generally not a good idea to
touch the hardware when it's off. Add an option to the commit_planes
helper to support this case.
Note that the helpers already add all planes on a crtc when a modeset
happens, hence plane updates will not be lost if drivers set this to
true.
v2: Check for NULL state->crtc before chasing the pointer. Also check
both old and new crtc if there's a switch. Finally just outright
disallow switching crtcs for a plane if the plane is in active use, on
most hardware that doesn't make sense.
v3: Since commit_planes(active_only = true) is for enabling things
only after all the crtc are on we should only look at the new crtc to
decide whether to call the plane hooks - if the current CRTC isn't on
then skip. If the old crtc (when moving a plane) went down then the
plane should have been disabled as part of the pipe shutdown work
already. For which there's currently no helper really unfortunately.
Also move the check for wether a plane gets a new CRTC assigned while
still in active use out of this patch.
v4: Rebase over exynos changes.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Maarten Lankhorst [Wed, 2 Sep 2015 08:42:40 +0000 (10:42 +0200)]
drm/atomic: Make prepare_fb/cleanup_fb only take state, v3.
This removes the need to separately track fb changes i915.
That will be done as a separate commit, however.
Changes since v1:
- Add dri-devel to cc.
- Fix a check in intel's prepare and cleanup fb to take rotation
into account.
Changes since v2:
- Split out i915 changes to a separate commit.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[danvet: Squash in msm fixup from Maarten.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Maarten Lankhorst [Thu, 27 Aug 2015 11:58:09 +0000 (13:58 +0200)]
drm/atomic: Make sure lock is held in trylock contexts.
This will make sure we get a lockdep spat in all cases
even if the context is a complete garbage pointer.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 31 Aug 2015 12:09:27 +0000 (15:09 +0300)]
drm/i2c/ch7006: Constify ch7006_tv_norms[] and ch7006_modes[]
drivers/gpu/drm/i2c/ch7006.ko:
-.text 5913
+.text 5897
-.rodata 664
+.rodata 7256
-.data 6992
+.data 416
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 31 Aug 2015 12:09:26 +0000 (15:09 +0300)]
drm: Constify TV mode names
Make the mode names passed to drm_mode_create_tv_properties() const.
drivers/gpu/drm/i2c/ch7006.ko:
-.rodata 596
+.rodata 664
-.data 7064
+.data 6992
drivers/gpu/drm/nouveau/nouveau.ko:
-.rodata 146808
+.rodata 146904
-.data 178624
+.data 178528
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Mon, 31 Aug 2015 12:09:25 +0000 (15:09 +0300)]
drm: Constify generic_edid_names[]
Make generic_edid_names[] const since it's supposed to be immutable.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bob Paauwe [Thu, 27 Aug 2015 17:04:13 +0000 (10:04 -0700)]
dtrm/edid: Allow comma separated edid binaries. (v3)
Allow comma separated filenames in the edid_firmware parameter.
For example:
edid_firmware=eDP-1:edid/1280x480.bin,DP-2:edid/1920x1080.bin
v2: Use strsep() to simplify parsing of comma seperated string. (Matt)
Move initial bail before strdup. (Matt)
v3: Changed conditionals after while loop to make more readable (Jani)
Updated kernel-parameters.txt to reflect changes (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
[danvet: Flatten else control flow and appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 26 Aug 2015 19:49:42 +0000 (21:49 +0200)]
drm/atomic: refuse changing CRTC for planes directly
Very strictly speaking this is possible if you have special hw and
genlocked CRTCs. In general switching a plane between two active CRTC
just won't work so well and is probably not tested at all. Just forbid
it.
I've put this into the core since right now no helper or driver copes
with it, no userspace has code for it and no one asks for it. Yes
there's piles of corner-cases where this would be possible to do this
like:
- switch from inactive crtc to active crtc
- switch from active crtc to inactive crtc
- genlocked display
- invisible plane (to do whatever)
- idle plane hw due to dsi cmd mode/psr
- whatever
but looking at details it's not that easy to implement this correctly.
Hence just put it into the core and add a comment, since the only
userspace we have right now for atomic (weston) doesn't want to use
direct plane switching either.
v2: don't bother with complexity and just outright disallow plane
switching without the intermediate OFF state. Simplifies drivers, we
don't have any hw that could do it anyway and current atomic userspace
(weston) works like this already anyway.
v3: Bikeshed function name (Ville) and add comment (Rob).
v4: Also bikeshed commit message (Rob).
v5: Fix compile warnings reported by 0-day.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Tue, 25 Aug 2015 13:45:13 +0000 (15:45 +0200)]
drm/fb-helper: Add module option to disable fbdev emulation
Faster than recompiling.
Note that restore_fbdev_mode_unlocked is a bit special and the only
one which returns an error code when fbdev isn't there - i915 needs
that one to not fall over with some additional fbcon related restore
code. Everyone else just ignores the return value or only prints a
DRM_DEBUG level message.
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 25 Aug 2015 13:45:11 +0000 (15:45 +0200)]
drm: Make drm_fb_unregister/remove accept NULL fb
These functions are used by drivers to release fbdev emulation
buffers. We need to make them resilient to NULL pointers to
make the fbdev compile/runtime knobs not cause Oopses on module
unload.
Cc: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 25 Aug 2015 15:20:28 +0000 (17:20 +0200)]
drm/fb-helper: Use -errno return in restore_mode_unlocked
Using bool and returning true upon error is very uncommon. Also an int
return value is actually what all the callers which did check it seem
to have expected.
v2: Restore hunk misplaced in a rebase, spotted by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 25 Aug 2015 14:26:03 +0000 (16:26 +0200)]
drm/atomic-helper: properly annotate functions in kerneldoc
Without the () the markup and more important hyperlinking wont happen.
v2: Also fix nearby type Laurent spotted.
v3: Actually git add. Argh!
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Danilo Cesar Lemes de Paula [Fri, 21 Aug 2015 19:46:14 +0000 (16:46 -0300)]
drm/doc: Fixing xml documentation warning
"/**" should be used for kernel-doc documentation only.
It causes a warning with the new "in struct body" format.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Graham Whaley <graham.whaley@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 19 Aug 2015 23:21:14 +0000 (19:21 -0400)]
drm: cleanup modesetting ioctls, one param per line
Since this already confused me once when adding addfb2.1, let's clean up
the header to split params one per line.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Sun, 16 Aug 2015 03:02:28 +0000 (04:02 +0100)]
drm/mm: Do DRM_MM_CREATE_TOP adj_start calculation after color_adjust
The adj_start calculation for DRM_MM_CREATE_TOP should happen after
mm->color_adjust. There was an inconsistency between
drm_mm_insert_helper_range
and drm_mm_insert_helper, as the later was already updating after
color_adjust.
Didn't spot it before, as color_adjust is only done in systems without
LLC. But I'm not aware of anybody using this test case yet.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Gustavo Padovan [Thu, 13 Aug 2015 20:06:39 +0000 (17:06 -0300)]
drm: WARN_ON if a modeset driver uses legacy suspend/resume helpers
Legacy s/r hooks are only used for shadow-attaching drivers, warn
when a KMS driver tries to use them.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Fri, 4 Sep 2015 21:46:09 +0000 (07:46 +1000)]
Merge branch 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more fixes for amdgpu from the last few days:
- Fix several copy paste typos
- Resume from suspend fixes for VCE
- Fix the GPU scheduler warning in kfifo_out
- Re-enable GPUVM fault interrupts which were inadvertently disabled
- GPUVM page table hang fix when paging
* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
drm/amdgpu: fix vce3 instance handling
drm/amdgpu: remove ib test for the second VCE Ring
drm/amdgpu: properly enable VM fault interrupts
drm/amdgpu: fix warning in scheduler
drm/amdgpu: fix buffer placement under memory pressure
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
drm/amdgpu: fix typo in dce11 watermark setup
drm/amdgpu: fix typo in dce10 watermark setup
drm/amdgpu: use top down allocation for non-CPU accessible vram
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
Alex Deucher [Thu, 3 Sep 2015 22:01:00 +0000 (18:01 -0400)]
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
It should be gfx_v8_0_init_compute_vmid since it's
part of the gfx block.
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 3 Sep 2015 23:03:11 +0000 (19:03 -0400)]
drm/amdgpu: fix vce3 instance handling
Need to properly handle the instances for the idle
checks and soft reset.
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Fri, 4 Sep 2015 19:08:55 +0000 (15:08 -0400)]
drm/amdgpu: remove ib test for the second VCE Ring
it seems the VCE ring 1 ib test not reliable, remove it for now.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-and-Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Christian König [Fri, 4 Sep 2015 16:48:29 +0000 (18:48 +0200)]
drm/amdgpu: properly enable VM fault interrupts
This fixes not printing VM faults.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 4 Sep 2015 04:11:54 +0000 (00:11 -0400)]
drm/amdgpu: fix warning in scheduler
This should never happen so warn when the count does
not equal the expected size.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 4 Sep 2015 03:09:20 +0000 (13:09 +1000)]
Merge tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel into drm-next
i915 display fixes headed for v4.3. Mostly SKL, but some regression
fixes too.
* tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel:
i915: Set ddi_pll_sel in DP MST path
drm/i915: Don't use link_bw for PLL setup
drm/i915: Preserve SSC earlier
drm/i915/skl: Adding DDI_E power well domain
drm/i915: eDP can be present on DDI-E
drm/i915/skl: Enable DDI-E
drm/i915: Enable HDMI on DDI-E
drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6
drm/i915: Check DP link status on long hpd too
drm/i915: set CDCLK if DPLL0 enabled during resuming from S3
Dave Airlie [Fri, 4 Sep 2015 03:08:40 +0000 (13:08 +1000)]
Merge branch 'drm-rockchip-2015-08-26' of https://github.com/markyzq/kernel-drm-rockchip into drm-next
Here are some fixes and some new features for rockchip drm,
tested on popmetal rk3288 board, can you land them?
* 'drm-rockchip-2015-08-26' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: vop: support plane scale
drm/rockchip: vop: restore vop registers when resume
drm/rockchip: vop: Default enable win2/3 area0 bit
drm/rockchip: vop: Add yuv plane support
drm/rockchip: vop: Fix window dest start point
drm/rockchip: vop: Fix virtual stride calculation
Dave Airlie [Fri, 4 Sep 2015 03:08:08 +0000 (13:08 +1000)]
Merge tag 'vmwgfx-next-15-09-01' of git://people.freedesktop.org/~thomash/linux into drm-next
Pull request of 2015-09-01
A single commit. Workaround for
https://bugzilla.redhat.com/show_bug.cgi?id=1227193
* tag 'vmwgfx-next-15-09-01' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Allow dropped masters render-node like access on legacy nodes v2
Dave Airlie [Fri, 4 Sep 2015 03:07:18 +0000 (13:07 +1000)]
Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
This is a last pull request, which includes two g2d patches
I missed, and more cleanup series of Exynos drm driver.
The cleanup series makes Exynos drm driver more simple,
and removes unnecessary codes, and considers multiple plane format
of framebuffer. I hope this not to be late.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: remove buf_cnt from struct exynos_drm_fb
drm/exynos: remove exynos_drm_fb_get_buf_cnt()
drm/exynos: cleanup exynos_user_fb_create()
drm/exynos: update exynos_drm_framebuffer_init() for multiple buffers
drm/exynos: cleanup to get gem object for fb
drm/exynos: update fb_info via only one function
drm/exynos: cleanup exynos_drm_fbdev_update()
drm/exynos: s/exynos_gem_obj/obj in exynos_drm_fbdev.c
drm/exynos: remove exynos_drm_fb_set_buf_cnt()
drm/exynos: remove superfluous checks in g2d_check_reg_offset()
drm/exynos: fix size check in g2d_check_buf_desc_is_valid()
Dave Airlie [Fri, 4 Sep 2015 03:06:29 +0000 (13:06 +1000)]
Merge branch 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux into drm-next
More fixes for radeon and amdgpu for 4.3:
- Send full DP aux address fixes for radeon and amdgpu
- Fix an HDMI display regression for pre-DCE5 parts
- UVD suspend fixes for amdgpu
- Add an rs480 suspend quirk
- Fix bo reserve handling in amdgpu GEM_OP ioctl
- GPU scheduler fixes
- SDMA optimizations
- MEC fix for Fiji
* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amdgpu: set MEC doorbell range for Fiji
drm/amdgpu: implement burst NOP for SDMA
drm/amdgpu: add insert_nop ring func and default implementation
drm/amdgpu: add amdgpu_get_sdma_instance helper function
drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
drm/amdgpu: add burst_nop flag for sdma
drm/amdgpu: add count field for the SDMA NOP packet v2
drm/amdgpu: use PT for VM sync on unmap
drm/amdgpu: make wait_event uninterruptible in push_job
drm/amdgpu: fix amdgpu_bo_unreserve order in GEM_OP IOCTL v2
drm/amdgpu: partially revert "modify amdgpu_fence_wait_any() to amdgpu_fence_wait_multiple()" v2
Add radeon suspend/resume quirk for HP Compaq dc5750.
drm/amdgpu: re-work sync_resv
drm/amdgpu/atom: Send out the full AUX address
drm/radeon/native: Send out the full AUX address
drm/radeon/atom: Send out the full AUX address
drm/amdgpu: use IB for fill_buffer instead of direct command
drm/amdgpu: stop trying to suspend UVD sessions v2
drm/amdgpu: add scheduler dependency callback v2
drm/amdgpu: let the scheduler work more with jobs v2
...
Christian König [Wed, 2 Sep 2015 18:25:48 +0000 (20:25 +0200)]
drm/amdgpu: fix buffer placement under memory pressure
Some buffers (UVD/VM page tables) must be placed in VRAM,
but the byte restriction for moving buffers didn't took this
into account.
Port of radeon commit
4b09556660bfe1b43d72ca858524c6baf2c6cb1d.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Alex Deucher [Thu, 3 Sep 2015 04:53:24 +0000 (00:53 -0400)]
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
The logic was reversed. This feature is not enabled
at the moment, but fix it now for the future.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 3 Sep 2015 14:16:23 +0000 (10:16 -0400)]
drm/amdgpu: fix typo in dce11 watermark setup
Using the wrong watermwark value for the secondary
watermark. Copy paste typo. Noticed by Mykola.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Thu, 3 Sep 2015 14:19:03 +0000 (10:19 -0400)]
drm/amdgpu: fix typo in dce10 watermark setup
Using the wrong watermwark value for the secondary
watermark. Copy paste typo. Noticed by Mykola.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Wed, 2 Sep 2015 19:06:08 +0000 (15:06 -0400)]
drm/amdgpu: use top down allocation for non-CPU accessible vram
Should help avoid fragmentation of vram due to CPU access
requirements.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 27 Aug 2015 04:14:16 +0000 (00:14 -0400)]
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
For kernel driver BOs, be explicit about whether we need
vram access up front. This avoids unecessary migrations and
avoids using visible vram for buffers were it's not needed.
v2: line wrap fixes
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jammy Zhou [Tue, 1 Sep 2015 08:44:11 +0000 (16:44 +0800)]
drm/amdgpu: set MEC doorbell range for Fiji
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Jammy Zhou [Tue, 1 Sep 2015 05:13:54 +0000 (13:13 +0800)]
drm/amdgpu: implement burst NOP for SDMA
Customize the insert_nop func for SDMA rings, and use burst NOP for
ring/IB submissions in other places as well
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Jammy Zhou [Tue, 1 Sep 2015 05:04:08 +0000 (13:04 +0800)]
drm/amdgpu: add insert_nop ring func and default implementation
The insert_nop function is added to amdgpu_ring_funcs structure as
well as the default implementation
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Jammy Zhou [Tue, 1 Sep 2015 04:56:17 +0000 (12:56 +0800)]
drm/amdgpu: add amdgpu_get_sdma_instance helper function
This function is added to map the ring to sdma instance
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Jammy Zhou [Tue, 1 Sep 2015 04:54:27 +0000 (12:54 +0800)]
drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
Remove the hardcoded usage
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Jammy Zhou [Mon, 31 Aug 2015 06:06:39 +0000 (14:06 +0800)]
drm/amdgpu: add burst_nop flag for sdma
The burst NOP is supported for SDMA when feature_version is >= 20.
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Jammy Zhou [Mon, 31 Aug 2015 06:01:05 +0000 (14:01 +0800)]
drm/amdgpu: add count field for the SDMA NOP packet v2
This is added to support the burst NOP
v2: squash the typo fix
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 1 Sep 2015 13:33:25 +0000 (15:33 +0200)]
drm/amdgpu: use PT for VM sync on unmap
Instead of the array which is used for ID management.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Chunming Zhou [Mon, 31 Aug 2015 07:46:12 +0000 (15:46 +0800)]
drm/amdgpu: make wait_event uninterruptible in push_job
with interruptible, the push_job maybe return -ERESTARTSYS,
then result in push_job error.
E.g. bug trace:
[ 181.618860] *****amdgpu_copy_buffer:fence->seq:0x0000000048d8758b, contxt:
1207959552, ref:
683967304, r:-512
[ 181.618929] BUG: unable to handle kernel paging request at
ffffffff811aa266
[ 181.625887] IP: [<
ffffffff81548ffc>] reservation_object_add_excl_fence+0x3c/0x120
...
[ 181.859767] [<
ffffffff811aa266>] ? unmap_mapping_range+0x66/0x110
[ 181.865928] [<
ffffffffc0608ac1>] ttm_bo_move_accel_cleanup+0x41/0x3c0 [ttm]
[ 181.872971] [<
ffffffffc062d382>] amdgpu_move_blit.isra.18+0x122/0x150 [amdgpu]
[ 181.880254] [<
ffffffff811aa266>] ? unmap_mapping_range+0x66/0x110
[ 181.886420] [<
ffffffffc062d709>] amdgpu_bo_move+0xa9/0x200 [amdgpu]
[ 181.892753] [<
ffffffffc0606e8d>] ttm_bo_handle_move_mem+0x26d/0x5c0 [ttm]
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Christian König [Fri, 28 Aug 2015 15:27:54 +0000 (17:27 +0200)]
drm/amdgpu: fix amdgpu_bo_unreserve order in GEM_OP IOCTL v2
No copy_(to|from)_user while BO is reserved.
v2: handle default path as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Christian König [Wed, 2 Sep 2015 16:14:57 +0000 (12:14 -0400)]
drm/amdgpu: partially revert "modify amdgpu_fence_wait_any() to amdgpu_fence_wait_multiple()" v2
That isn't used any more.
v2: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jeffery Miller [Tue, 1 Sep 2015 15:23:02 +0000 (11:23 -0400)]
Add radeon suspend/resume quirk for HP Compaq dc5750.
With the radeon driver loaded the HP Compaq dc5750
Small Form Factor machine fails to resume from suspend.
Adding a quirk similar to other devices avoids
the problem and the system resumes properly.
Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Chunming Zhou [Mon, 24 Aug 2015 08:59:54 +0000 (16:59 +0800)]
drm/amdgpu: re-work sync_resv
sync_resv is to handle both amdgpu_fence and sched_fence.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Alex Deucher [Mon, 31 Aug 2015 15:08:44 +0000 (11:08 -0400)]
drm/amdgpu/atom: Send out the full AUX address
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.
Port of:
drm/radeon/atom: Send out the full AUX address
to amdgpu
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Joonyoung Shim [Tue, 1 Sep 2015 07:22:55 +0000 (16:22 +0900)]
drm/exynos: remove buf_cnt from struct exynos_drm_fb
Looking other drm drivers, there is no the restriction that framebuffer
has only one buffer in .create_handle() callback. They use just first
buffer.
If this limitation is removed, there is no reason keeping buffer count
for framebuffer, so we can remove buf_cnt from struct exynos_drm_fb.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Tue, 1 Sep 2015 07:22:54 +0000 (16:22 +0900)]
drm/exynos: remove exynos_drm_fb_get_buf_cnt()
We can get buffer count of framebuffer using drm_format_num_planes(), so
keeping exynos_drm_fb_get_buf_cnt() is unnecessary.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Tue, 1 Sep 2015 07:22:53 +0000 (16:22 +0900)]
drm/exynos: cleanup exynos_user_fb_create()
Using exynos_drm_framebuffer_init(), redundant codes can be removed.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Tue, 1 Sep 2015 07:22:52 +0000 (16:22 +0900)]
drm/exynos: update exynos_drm_framebuffer_init() for multiple buffers
This modifies exynos_drm_framebuffer_init() to be possible to support
multiple buffers. Then it can be used by exynos_user_fb_create().
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Tue, 1 Sep 2015 07:22:51 +0000 (16:22 +0900)]
drm/exynos: cleanup to get gem object for fb
Current codes get first gem object and then again get remain gem
objects. They can be unified to one routine.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Tue, 1 Sep 2015 07:22:50 +0000 (16:22 +0900)]
drm/exynos: update fb_info via only one function
This patch moves codes to update fb_info into exynos_drm_fbdev_update(),
so fb_info is updated via only one function.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Tue, 1 Sep 2015 07:22:49 +0000 (16:22 +0900)]
drm/exynos: cleanup exynos_drm_fbdev_update()
It can get exynos_gem object via function argument, so no need to call
exynos_drm_fb_gem_obj() in exynos_drm_fbdev_update.
It also can get struct drm_framebuffer *fb via helper->fb, so can remove
a function argument for it.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Tue, 1 Sep 2015 07:22:48 +0000 (16:22 +0900)]
drm/exynos: s/exynos_gem_obj/obj in exynos_drm_fbdev.c
The variable name "exynos_gem_obj" is too long, so some lines exceed 80
characters. It's simple to use "obj" instead of "exynos_gem_obj".
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Tue, 1 Sep 2015 07:22:47 +0000 (16:22 +0900)]
drm/exynos: remove exynos_drm_fb_set_buf_cnt()
The exynos_drm_fb_set_buf_cnt() is used to set buffer count only in
exynos_drm_fbdev_update(). This patch sets directly buffer count in
exynos_drm_framebuffer_init() without using exynos_drm_fb_set_buf_cnt(),
so there is no any reason to keep exynos_drm_fb_set_buf_cnt().
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Tobias Jakobi [Mon, 17 Aug 2015 22:51:23 +0000 (00:51 +0200)]
drm/exynos: remove superfluous checks in g2d_check_reg_offset()
The cases of the switch statement ensure that reg_type
can never be REG_TYPE_NONE here.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Tobias Jakobi [Mon, 17 Aug 2015 22:51:24 +0000 (00:51 +0200)]
drm/exynos: fix size check in g2d_check_buf_desc_is_valid()
The size check was incomplete. It only computed the
size of area of the drawing rectangle and checked if
the size still fit inside the buffer.
The correct check is to compute the position of the
last byte that the G2D engine is going to access and
then check if that position is still contained in the
buffer. In particular we need the stride information
to determine this.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Ander Conselvan de Oliveira [Mon, 31 Aug 2015 08:23:28 +0000 (11:23 +0300)]
i915: Set ddi_pll_sel in DP MST path
The DP MST encoder config function never sets ddi_pll_sel, even though
its value is programmed in its ->pre_enable() hook. That used to work
because a new pipe_config was kzalloc'ed at every modeset, and the value
of zero selects the highest clock for the PLL. Starting with the commit
below, the value of ddi_pll_sel is preserved through modesets, and since
the correct value wasn't properly setup by the MST code, it could lead
to warnings and blank screens.
commit
8504c74c7ae48b4b8ed1f1c0acf67482a7f45c93
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Fri May 15 11:51:50 2015 +0300
drm/i915: Preserve ddi_pll_sel when allocating new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91628
Cc: stable@vger.kernel.org # 7e6313a2516d drm/i915: Don't use link_bw for PLL setup
Cc: stable@vger.kernel.org
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Tue, 11 Aug 2015 17:21:46 +0000 (20:21 +0300)]
drm/i915: Don't use link_bw for PLL setup
Use port_clock instead of link_bw when picking the PLL parameters for
DP. link_bw may be zero with an eDP 1.4 sink that supports
DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it
to the sink appropriately.
v2: Fix typo in commit message (Sivakumar)
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: cherry-picked from future.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Thomas Hellstrom [Thu, 27 Aug 2015 17:06:24 +0000 (10:06 -0700)]
drm/vmwgfx: Allow dropped masters render-node like access on legacy nodes v2
Applications like gnome-shell may try to render after dropping master
privileges. Since the driver should now be safe against this scenario,
allow those applications to use their legacy node like a render node.
v2: Add missing return statement.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Lukas Wunner [Wed, 15 Jul 2015 11:57:35 +0000 (13:57 +0200)]
drm/i915: Preserve SSC earlier
Commit
92122789b2d6 ("drm/i915: preserve SSC if previously set v3")
added code to intel_modeset_gem_init to override the SSC status read
from VBT with the SSC status set by BIOS.
However, intel_modeset_gem_init is invoked *after* intel_modeset_init,
which calls intel_setup_outputs, which *modifies* SSC status by way of
intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init
doesn't preserve the SSC status set by BIOS but whatever
intel_init_pch_refclk decided on.
This is a problem on dual gpu laptops such as the MacBook Pro which
require either a handler to switch DDC lines, or the discrete gpu
to proxy DDC/AUX communication: Both the handler and the discrete
gpu may initialize after the i915 driver, and consequently, an LVDS
connector may initially seem disconnected and the SSC therefore
is disabled by intel_init_pch_refclk, but on reprobe the connector
may turn out to be connected and the SSC must then be enabled.
Due to
92122789b2d6 however, the SSC is not enabled on reprobe since
it is assumed BIOS disabled it while in fact it was disabled by
intel_init_pch_refclk.
Also, because the SSC status is preserved so late, the preserved value
only ever gets used on resume but not on panel initialization:
intel_modeset_init calls intel_init_display which indirectly calls
intel_panel_use_ssc via multiple subroutines, *before* the BIOS value
overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc
is the sole user of dev_priv->vbt.lvds_use_ssc).
Fix this by moving the code introduced by
92122789b2d6 from
intel_modeset_gem_init to intel_modeset_init before the invocation
of intel_setup_outputs and intel_init_display.
Add a DRM_DEBUG_KMS as suggested way back by Jani:
http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Paul Hordiienko <pvt.gord@gmail.com>
[MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina]
Tested-by: William Brown <william@blackhats.net.au>
[MBP 8,2 2011 intel SNB + amd turks pre-retina]
Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina]
Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net>
[MBP 11,3 2013 intel HSW + nvidia GK107 retina -- work in progress]
Fixes:
92122789b2d6 ("drm/i915: preserve SSC if previously set v3")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Xiong Zhang [Thu, 13 Aug 2015 10:00:12 +0000 (18:00 +0800)]
drm/i915/skl: Adding DDI_E power well domain
From B spec, DDI_E port belong to PowerWell 2, but
DDI_E share the powerwell_req/staus register bit with
DDI_A which belong to DDI_A_E_POWER_WELL.
In order to communicate with the connector on DDI-E, both
DDI_A_E_POWER_WELL and POWER_WELL_2 must be enabled.
Currently intel_dp_power_get(DDI_E) only enable
DDI_A_E_POWER_WELL, this patch will not only enable
DDI_a_E_POWER_WELL but also enable POWER_WELL_2.
This patch also fix the DDI-E hotplug function.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Alex Deucher [Mon, 31 Aug 2015 15:15:05 +0000 (11:15 -0400)]
drm/radeon/native: Send out the full AUX address
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.
Port of:
drm/radeon/atom: Send out the full AUX address
to radeon non-atom aux path
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Ville Syrjälä [Thu, 27 Aug 2015 14:23:31 +0000 (17:23 +0300)]
drm/radeon/atom: Send out the full AUX address
AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Rodrigo Vivi [Thu, 6 Aug 2015 07:51:39 +0000 (15:51 +0800)]
drm/i915: eDP can be present on DDI-E
Enable eDP on DDI-E.
Also let's remove duplicated definitions to avoid later confusion.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Rodrigo Vivi [Sat, 8 Aug 2015 00:35:21 +0000 (17:35 -0700)]
drm/i915/skl: Enable DDI-E
There are OEMs using DDI-E out there,
so let's enable it.
Unfortunately there is no detection bit for DDI-E
So we need to rely on VBT for that.
I also need to give credits to Xiong since before seing
his approach to check info->support_* I was creating an ugly
vbt->ddie_sfuse_strap in order to propagate the ddi presence info
v2: Rebased as last patch in the series. since all other patches
in this series are needed for anything working propperly on DDI-E.
Credits-to: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Cc: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Xiong Zhang [Mon, 17 Aug 2015 08:04:04 +0000 (16:04 +0800)]
drm/i915: Enable HDMI on DDI-E
DDI-E doesn't have the correspondent GMBUS pin.
We rely on VBT to tell us which one it being used instead.
The DVI/HDMI on shared port couldn't exist.
This patch isn't tested without hardware wchich has HDMI
on DDI-E.
v2: fix trailing whitespace
v3: MISSING_CASE take place of BUG()
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Imre Deak [Tue, 30 Jun 2015 14:06:47 +0000 (17:06 +0300)]
drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6
commit
da2bc1b9db3351addd293e5b82757efe1f77ed1d
Author: Imre Deak <imre.deak@intel.com>
Date: Thu Oct 23 19:23:26 2014 +0300
drm/i915: add poweroff_late handler
introduced a regression on old platforms during hibernation. A workaround was
added in
commit
ab3be73fa7b43f4c3648ce29b5fd649ea54d3adb
Author: Imre Deak <imre.deak@intel.com>
Date: Mon Mar 2 13:04:41 2015 +0200
drm/i915: gen4: work around hang during hibernation
using an explicit blacklist for the GENs/BIOS vendors where the issue was
reported. Later there we had reports of the same failure on platforms not on
this list.
To my best knowledge the correct thing to do is still to put the device to PCI
D3 state during hibernation, see [1] and [2] for the reasons. This also aligns
with our future plans to unify more the runtime and system suspend/resume
paths. Since an exact blacklist seems to be impractical (multiple GENs and
BIOS vendors are affected) apply the workaround on everything pre GEN6.
[1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/060710.html
[2] https://lkml.org/lkml/2015/6/22/274
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95061
Reported-by: Ilya Tumaykin <itumaykin@gmail.com>
Reported-by: Dirk Griesbach <spamthis@freenet.de>
Reported-by: Pavel Machek <pavel@ucw.cz>
Reported-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
CC: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Thu, 20 Aug 2015 16:37:29 +0000 (19:37 +0300)]
drm/i915: Check DP link status on long hpd too
We are no longer checkling the DP link status on long hpd. We used to do
that from the .hot_plug() handler, but it was removed when MST got
introduced.
If there's no userspace we now fail to retrain the link if the sink
power is toggled (or cable yanked and replugged), meaning the user is
left staring at a blank screen. With the retraining put back that should
be fixed.
Also remove the leftover comment that referred to the old retraining
from .hot_plug().
Fixes a regression introduced in:
commit
0e32b39ceed665bfa4a77a4bc307b6652b991632
Author: Dave Airlie <airlied@redhat.com>
Date: Fri May 2 14:02:48 2014 +1000
drm/i915: add DP 1.2 MST support (v0.7)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89453
Tested-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91407
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89461
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85641
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Dave Airlie [Mon, 31 Aug 2015 00:25:45 +0000 (10:25 +1000)]
Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
This is a second pull-request which adds last part of
atomic modeset/pageflip support, render node support,
clean-up, and fix-up.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix build warning to exynos_drm_gem.c
drm/exynos: Properly report supported formats for each device
drm/exynos: add render node support
drm/exynos: implement atomic_{begin/flush} of DECON
drm/exynos: remove legacy ->suspend()/resume()
drm/exynos: Enable atomic modesetting feature
drm/exynos: remove wait queue for pending page flip
drm/exynos: wait all planes updates to finish
drm/exynos: add atomic asynchronous commit
drm/exynos: fimd: only finish update if START == START_S
drm/exynos: add macro to get the address of START_S reg
drm/exynos: check for pending fb before finish update
drm/exynos: fimd: move window protect code to prepare/cleanup_plane
drm/exynos: add prepare and cleanup phases for planes
drm/exynos: fimd: unify call to exynos_drm_crtc_finish_pageflip()
drm/exynos: don't track enabled state at exynos_crtc
Dave Airlie [Mon, 31 Aug 2015 00:06:22 +0000 (10:06 +1000)]
Merge tag 'drm-intel-next-fixes-2015-08-28' of git://anongit.freedesktop.org/drm-intel into drm-next
Some i915 fixes headed for v4.3. SKL DDI-E is a wip, but here's the
first in a series.
* tag 'drm-intel-next-fixes-2015-08-28' of git://anongit.freedesktop.org/drm-intel:
drm/i915/skl: enable DDI-E hotplug
drm/i915: Fix build warning on 32-bit
drm/i915/skl: Update DDI buffer translation programming.
drm/i915: Allow parsing of variable size child device entries from VBT
drm/i915: fix link rates reported for SKL
drm/i915: fix VBT parsing for SDVO child device mapping
Dave Airlie [Mon, 31 Aug 2015 00:05:37 +0000 (10:05 +1000)]
Merge tag 'drm-amdkfd-next-fixes-2015-08-30' of git://people.freedesktop.org/~gabbayo/linux into drm-next
Just one small fix before 4.3 merge window:
- Use linux/mman.h instead of uapi's mman-common.h inside the driver.
* tag 'drm-amdkfd-next-fixes-2015-08-30' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: use <linux/mman.h> instead of <uapi/asm-generic/mman-common.h>
Inki Dae [Sun, 30 Aug 2015 16:11:53 +0000 (01:11 +0900)]
drm/exynos: fix build warning to exynos_drm_gem.c
Signed-off-by: Inki Dae <daeinki@gmail.com>
Marek Szyprowski [Sun, 30 Aug 2015 15:53:57 +0000 (00:53 +0900)]
drm/exynos: Properly report supported formats for each device
Exynos DRM reported that all planes for all supported sub-devices supports
only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each
Exynos DRM sub-drivers to provide the list of supported pixel formats
and registers this list to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Joonyoung Shim [Sun, 30 Aug 2015 15:45:56 +0000 (00:45 +0900)]
drm/exynos: add render node support
This patch allows clients who want to use render node to access
rendering relevant ioctls - g2d, post processor and gem allocation.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Hyungwon Hwang [Thu, 27 Aug 2015 09:21:14 +0000 (18:21 +0900)]
drm/exynos: implement atomic_{begin/flush} of DECON
Each CRTC's atomic_{begin/flush} must stop/start the update of shadow
registers to active register in the functions. This patch achieves these
purpose by moving the setting of protection bits to those functions from
decon_update_plane.
v2: rebased to the branch exynos-drm-next
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sun, 30 Aug 2015 15:33:57 +0000 (00:33 +0900)]
drm/exynos: remove legacy ->suspend()/resume()
These legacy helpers should only be used by shadow-attaching drivers.
KMS drivers has its own way to handle suspend/resume and don't need to
use these two helpers.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <daeinki@gmail.com>
Gustavo Padovan [Mon, 24 Aug 2015 11:52:19 +0000 (20:52 +0900)]
drm/exynos: Enable atomic modesetting feature
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Now that atomic modesetting is implemented for exynos enable the
DRIVER_ATOMIC flag on the driver's features.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:19 +0000 (13:26 -0300)]
drm/exynos: remove wait queue for pending page flip
Exynos atomic commit procedures already does this job of waiting for
pending updates to finish, that means using pending_flip_queue is
pointless now because the disable CRTC procedure will never happen
during a page_flip.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:18 +0000 (13:26 -0300)]
drm/exynos: wait all planes updates to finish
Add infrastructure to wait for all planes updates to finish by using
an atomic_t variable to track how many pending updates we are waiting
plus a wait_queue for the wait part.
It also changes vblank behaviour and keeps it enabled for all types
of updates
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:17 +0000 (13:26 -0300)]
drm/exynos: add atomic asynchronous commit
The atomic modesetting interfaces supports async commits that should be
implemented by the drivers. If drm core requests an async commit
exynos_atomic_commit() will now schedule a work task to run the update later.
It also serializes commits that needs to run on the same crtc, putting the
following commit to wait until the current one is finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:16 +0000 (13:26 -0300)]
drm/exynos: fimd: only finish update if START == START_S
fimd_update_plane() programs BUF_START[win] and during the update
BUF_START[win] is copied to BUF_START_S[win] (its shadow register)
and starts scanning out, then it raises a irq.
The fimd_irq_handler, in the case we have a pending_fb, will check
the fb value was copied to START_S register and finish the update
in case of success.
Based on patch from Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:15 +0000 (13:26 -0300)]
drm/exynos: add macro to get the address of START_S reg
This macro is need to get the value of the START shadow register, that
will tell if an framebuffer is currently displayed on the screen or not.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:14 +0000 (13:26 -0300)]
drm/exynos: check for pending fb before finish update
The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.
This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fixup! drm/exynos: check for pending fb before finish update
Gustavo Padovan [Sat, 15 Aug 2015 16:26:13 +0000 (13:26 -0300)]
drm/exynos: fimd: move window protect code to prepare/cleanup_plane
Only set/clear the update bit in the CRTC's .atomic_begin()/flush()
so all planes are really committed at the same time.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Mon, 24 Aug 2015 11:36:59 +0000 (20:36 +0900)]
drm/exynos: add prepare and cleanup phases for planes
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
.prepare_plane() and .cleanup_plane() allows to perform extra operations
before and after the update of planes. For FIMD for example this will
be used to enable disable the shadow protection bit.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:11 +0000 (13:26 -0300)]
drm/exynos: fimd: unify call to exynos_drm_crtc_finish_pageflip()
Unify handling of finished plane update to prepare for a following patch
that will check for the START and START_S regs to really make sure that
the plane was updated.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Gustavo Padovan [Sat, 15 Aug 2015 16:26:10 +0000 (13:26 -0300)]
drm/exynos: don't track enabled state at exynos_crtc
struct drm_crtc already stores the enabled state of the crtc
thus we don't need to replicate enabled in exynos_drm_crtc.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Christoph Hellwig [Fri, 28 Aug 2015 07:27:16 +0000 (09:27 +0200)]
amdkfd: use <linux/mman.h> instead of <uapi/asm-generic/mman-common.h>
The latter is a default version of <asm/mman.h> and not for driver use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Chunming Zhou [Thu, 27 Aug 2015 05:46:09 +0000 (13:46 +0800)]
drm/amdgpu: use IB for fill_buffer instead of direct command
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 7 May 2015 13:19:25 +0000 (15:19 +0200)]
drm/amdgpu: stop trying to suspend UVD sessions v2
Saving the current UVD state on suspend and restoring it on resume
just doesn't work reliable. Just close cleanup all sessions on suspend.
Ported from radeon commit "
12e49feadff6d7b7ebbe852b36943a71524d8d34".
v2: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
projects / platform / kernel / linux-amlogic.git / log