Steven Rostedt (VMware) [Sun, 14 Nov 2021 18:28:34 +0000 (13:28 -0500)]
tracing: Add length protection to histogram string copies
[ Upstream commit
938aa33f14657c9ed9deea348b7d6f14b6d69cb7 ]
The string copies to the histogram storage has a max size of 256 bytes
(defined by MAX_FILTER_STR_VAL). Only the string size of the event field
needs to be copied to the event storage, but no more than what is in the
event storage. Although nothing should be bigger than 256 bytes, there's
no protection against overwriting of the storage if one day there is.
Copy no more than the destination size, and enforce it.
Also had to turn MAX_FILTER_STR_VAL into an unsigned int, to keep the
min() comparison of the string sizes of comparable types.
Link: https://lore.kernel.org/all/CAHk-=wjREUihCGrtRBwfX47y_KrLCGjiq3t6QtoNJpmVrAEb1w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211114132834.183429a4@rorschach.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
63f84ae6b82b ("tracing/histogram: Do not copy the fixed-size char array field over the field size")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arjun Roy [Thu, 11 Nov 2021 23:52:15 +0000 (15:52 -0800)]
tcp: Fix uninitialized access in skb frags array for Rx 0cp.
[ Upstream commit
70701b83e208767f2720d8cd3e6a62cddafb3a30 ]
TCP Receive zerocopy iterates through the SKB queue via
tcp_recv_skb(), acquiring a pointer to an SKB and an offset within
that SKB to read from. From there, it iterates the SKB frags array to
determine which offset to start remapping pages from.
However, this is built on the assumption that the offset read so far
within the SKB is smaller than the SKB length. If this assumption is
violated, we can attempt to read an invalid frags array element, which
would cause a fault.
tcp_recv_skb() can cause such an SKB to be returned when the TCP FIN
flag is set. Therefore, we must guard against this occurrence inside
skb_advance_frag().
One way that we can reproduce this error follows:
1) In a receiver program, call getsockopt(TCP_ZEROCOPY_RECEIVE) with:
char some_array[32 * 1024];
struct tcp_zerocopy_receive zc = {
.copybuf_address = (__u64) &some_array[0],
.copybuf_len = 32 * 1024,
};
2) In a sender program, after a TCP handshake, send the following
sequence of packets:
i) Seq = [X, X+4000]
ii) Seq = [X+4000, X+5000]
iii) Seq = [X+4000, X+5000], Flags = FIN | URG, urgptr=1000
(This can happen without URG, if we have a signal pending, but URG is
a convenient way to reproduce the behaviour).
In this case, the following event sequence will occur on the receiver:
tcp_zerocopy_receive():
-> receive_fallback_to_copy() // copybuf_len >= inq
-> tcp_recvmsg_locked() // reads 5000 bytes, then breaks due to URG
-> tcp_recv_skb() // yields skb with skb->len == offset
-> tcp_zerocopy_set_hint_for_skb()
-> skb_advance_to_frag() // will returns a frags ptr. >= nr_frags
-> find_next_mappable_frag() // will dereference this bad frags ptr.
With this patch, skb_advance_to_frag() will no longer return an
invalid frags pointer, and will return NULL instead, fixing the issue.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes:
05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Link: https://lore.kernel.org/r/20211111235215.2605384-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Thu, 11 Nov 2021 18:37:24 +0000 (19:37 +0100)]
net/ipa: ipa_resource: Fix wrong for loop range
[ Upstream commit
27df68d579c67ef6c39a5047559b6a7c08c96219 ]
The source group count was mistakenly assigned to both dst and src loops.
Fix it to make IPA probe and work again.
Fixes:
4fd704b3608a ("net: ipa: record number of groups in data")
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20211111183724.593478-1-konrad.dybcio@somainline.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Thu, 11 Nov 2021 16:29:29 +0000 (08:29 -0800)]
selftests: net: switch to socat in the GSO GRE test
[ Upstream commit
0cda7d4bac5fd29dceb13df26083333fa99d6bb4 ]
Commit
a985442fdecb ("selftests: net: properly support IPv6 in GSO GRE test")
is not compatible with:
Ncat: Version 7.80 ( https://nmap.org/ncat )
(which is distributed with Fedora/Red Hat), tests fail with:
nc: invalid option -- 'N'
Let's switch to socat which is far more dependable.
Fixes:
025efa0a82df ("selftests: add simple GSO GRE test")
Fixes:
a985442fdecb ("selftests: net: properly support IPv6 in GSO GRE test")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Link: https://lore.kernel.org/r/20211111162929.530470-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kumar Kartikeya Dwivedi [Fri, 12 Nov 2021 02:03:01 +0000 (07:33 +0530)]
samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
[ Upstream commit
2453afe3845523d9dfe89dbfb3d71abfa095e260 ]
Commit
b599015f044d ("samples/bpf: Fix application of sizeof to pointer")
tried to fix a bug where sizeof was incorrectly applied to a pointer instead
of the array string was being copied to, to find the destination buffer size,
but ended up using strlen, which is still incorrect. However, on closer look
ifname_buf has no other use, hence directly use optarg.
Fixes:
b599015f044d ("samples/bpf: Fix application of sizeof to pointer")
Fixes:
e531a220cc59 ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20211112020301.528357-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Lobakin [Thu, 11 Nov 2021 21:57:03 +0000 (22:57 +0100)]
samples/bpf: Fix summary per-sec stats in xdp_sample_user
[ Upstream commit
dc14ca4644f48b1cfa93631e35c28bdc011ad109 ]
sample_summary_print() uses accumulated period to calculate and display
per-sec averages. This period gets incremented by sampling interval each
time a new sample is formed, and thus equals to the number of samples
collected multiplied by this interval.
However, the totals are being calculated differently, they receive current
sample statistics already divided by the interval gotten as a difference
between sample timestamps for better precision -- in other words, they are
being incremented by the per-sec values each sample.
This leads to the excessive division of summary per-secs when interval != 1
sec. It is obvious pps couldn't become two times lower just from picking a
different sampling interval value:
$ samples/bpf/xdp_redirect_cpu -p xdp_prognum_n1_inverse_qnum -c all
-s -d 6 -i 1
< snip >
Packets received : 2,197,230,321
Average packets/s : 22,887,816
Packets redirected : 2,197,230,472
Average redir/s : 22,887,817
$ samples/bpf/xdp_redirect_cpu -p xdp_prognum_n1_inverse_qnum -c all
-s -d 6 -i 2
< snip >
Packets received : 159,566,498
Average packets/s : 11,397,607
Packets redirected : 159,566,995
Average redir/s : 11,397,642
This can be easily fixed by treating the divisor not as a period, but rather
as a total number of samples, and thus incrementing it by 1 instead of
interval. As a nice side effect, we can now remove so-named argument from a
couple of functions. Let us also create an "alias" for sample_output::rx_cnt::pps
named 'num' using a union since this field is used to store this number (period
previously) as well, and the resulting counter-intuitive code might've been a
reason for this bug.
Fixes:
156f886cf697 ("samples: bpf: Add basic infrastructure for XDP samples")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211111215703.690-1-alexandr.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexei Starovoitov [Wed, 10 Nov 2021 17:25:56 +0000 (09:25 -0800)]
bpf: Fix inner map state pruning regression.
[ Upstream commit
34d11a440c6167133201b7374065b59f259730d7 ]
Introduction of map_uid made two lookups from outer map to be distinct.
That distinction is only necessary when inner map has an embedded timer.
Otherwise it will make the verifier state pruning to be conservative
which will cause complex programs to hit 1M insn_processed limit.
Tighten map_uid logic to apply to inner maps with timers only.
Fixes:
3e8ce29850f1 ("bpf: Prevent pointer mismatch in bpf_timer_init.")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsUH28w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20211110172556.20754-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil [Wed, 10 Nov 2021 15:36:04 +0000 (16:36 +0100)]
drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
[ Upstream commit
3cc1ae1fa70ab369e4645e38ce335a19438093ad ]
gv100_hdmi_ctrl() writes vendor_infoframe.subpack0_high to 0x6f0110, and
then overwrites it with 0. Just drop the overwrite with 0, that's clearly
a mistake.
Because of this issue the HDMI VIC is 0 instead of 1 in the HDMI Vendor
InfoFrame when transmitting 4kp30.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes:
290ffeafcc1a ("drm/nouveau/disp/gv100: initial support")
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d3bd0f7-c150-2479-9350-35d394ee772d@xs4all.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Clark [Thu, 28 Oct 2021 13:48:26 +0000 (14:48 +0100)]
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
[ Upstream commit
a9cdc1c5e3700a5200e5ca1f90b6958b6483845b ]
Commit
463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:
$ ./perf test -v 85
85: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 50643
Collecting compressed record file:
./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found
Fixes:
463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sohaib Mohamed [Fri, 12 Nov 2021 20:11:33 +0000 (22:11 +0200)]
perf bench futex: Fix memory leak of perf_cpu_map__new()
[ Upstream commit
88e48238d53682281c9de2a0b65d24d3b64542a0 ]
ASan reports memory leaks while running:
$ sudo ./perf bench futex all
The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.
Fixes:
9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Fri, 12 Nov 2021 07:45:25 +0000 (23:45 -0800)]
perf bpf: Avoid memory leak from perf_env__insert_btf()
[ Upstream commit
4924b1f7c46711762fd0e65c135ccfbcfd6ded1f ]
perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.
v2. Adds a return -1 when the insertion error occurs in
perf_env__fetch_btf. This doesn't affect anything as the result is
never checked.
Fixes:
3792cb2ff43b1b19 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Fri, 12 Nov 2021 16:02:08 +0000 (01:02 +0900)]
tracing/histogram: Do not copy the fixed-size char array field over the field size
[ Upstream commit
63f84ae6b82bb4dff672f76f30c6fd7b9d3766bc ]
Do not copy the fixed-size char array field of the events over
the field size. The histogram treats char array as a string and
there are 2 types of char array in the event, fixed-size and
dynamic string. The dynamic string (__data_loc) field must be
null terminated, but the fixed-size char array field may not
be null terminated (not a string, but just a data).
In that case, histogram can copy the data after the field.
This uses the original field size for fixed-size char array
field to restrict the histogram not to access over the original
field size.
Link: https://lkml.kernel.org/r/163673292822.195747.3696966210526410250.stgit@devnote2
Fixes:
02205a6752f2 (tracing: Add support for 'field variables')
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laibin Qiu [Fri, 12 Nov 2021 09:33:54 +0000 (17:33 +0800)]
blkcg: Remove extra blkcg_bio_issue_init
[ Upstream commit
b781d8db580c058ecd54ed7d5dde7f8270b25f5b ]
KASAN reports a use-after-free report when doing block test:
==================================================================
[10050.967049] BUG: KASAN: use-after-free in
submit_bio_checks+0x1539/0x1550
[10050.977638] Call Trace:
[10050.978190] dump_stack+0x9b/0xce
[10050.979674] print_address_description.constprop.6+0x3e/0x60
[10050.983510] kasan_report.cold.9+0x22/0x3a
[10050.986089] submit_bio_checks+0x1539/0x1550
[10050.989576] submit_bio_noacct+0x83/0xc80
[10050.993714] submit_bio+0xa7/0x330
[10050.994435] mpage_readahead+0x380/0x500
[10050.998009] read_pages+0x1c1/0xbf0
[10051.002057] page_cache_ra_unbounded+0x4c2/0x6f0
[10051.007413] do_page_cache_ra+0xda/0x110
[10051.008207] force_page_cache_ra+0x23d/0x3d0
[10051.009087] page_cache_sync_ra+0xca/0x300
[10051.009970] generic_file_buffered_read+0xbea/0x2130
[10051.012685] generic_file_read_iter+0x315/0x490
[10051.014472] blkdev_read_iter+0x113/0x1b0
[10051.015300] aio_read+0x2ad/0x450
[10051.023786] io_submit_one+0xc8e/0x1d60
[10051.029855] __se_sys_io_submit+0x125/0x350
[10051.033442] do_syscall_64+0x2d/0x40
[10051.034156] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[10051.048733] Allocated by task 18598:
[10051.049482] kasan_save_stack+0x19/0x40
[10051.050263] __kasan_kmalloc.constprop.1+0xc1/0xd0
[10051.051230] kmem_cache_alloc+0x146/0x440
[10051.052060] mempool_alloc+0x125/0x2f0
[10051.052818] bio_alloc_bioset+0x353/0x590
[10051.053658] mpage_alloc+0x3b/0x240
[10051.054382] do_mpage_readpage+0xddf/0x1ef0
[10051.055250] mpage_readahead+0x264/0x500
[10051.056060] read_pages+0x1c1/0xbf0
[10051.056758] page_cache_ra_unbounded+0x4c2/0x6f0
[10051.057702] do_page_cache_ra+0xda/0x110
[10051.058511] force_page_cache_ra+0x23d/0x3d0
[10051.059373] page_cache_sync_ra+0xca/0x300
[10051.060198] generic_file_buffered_read+0xbea/0x2130
[10051.061195] generic_file_read_iter+0x315/0x490
[10051.062189] blkdev_read_iter+0x113/0x1b0
[10051.063015] aio_read+0x2ad/0x450
[10051.063686] io_submit_one+0xc8e/0x1d60
[10051.064467] __se_sys_io_submit+0x125/0x350
[10051.065318] do_syscall_64+0x2d/0x40
[10051.066082] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[10051.067455] Freed by task 13307:
[10051.068136] kasan_save_stack+0x19/0x40
[10051.068931] kasan_set_track+0x1c/0x30
[10051.069726] kasan_set_free_info+0x1b/0x30
[10051.070621] __kasan_slab_free+0x111/0x160
[10051.071480] kmem_cache_free+0x94/0x460
[10051.072256] mempool_free+0xd6/0x320
[10051.072985] bio_free+0xe0/0x130
[10051.073630] bio_put+0xab/0xe0
[10051.074252] bio_endio+0x3a6/0x5d0
[10051.074984] blk_update_request+0x590/0x1370
[10051.075870] scsi_end_request+0x7d/0x400
[10051.076667] scsi_io_completion+0x1aa/0xe50
[10051.077503] scsi_softirq_done+0x11b/0x240
[10051.078344] blk_mq_complete_request+0xd4/0x120
[10051.079275] scsi_mq_done+0xf0/0x200
[10051.080036] virtscsi_vq_done+0xbc/0x150
[10051.080850] vring_interrupt+0x179/0x390
[10051.081650] __handle_irq_event_percpu+0xf7/0x490
[10051.082626] handle_irq_event_percpu+0x7b/0x160
[10051.083527] handle_irq_event+0xcc/0x170
[10051.084297] handle_edge_irq+0x215/0xb20
[10051.085122] asm_call_irq_on_stack+0xf/0x20
[10051.085986] common_interrupt+0xae/0x120
[10051.086830] asm_common_interrupt+0x1e/0x40
==================================================================
Bio will be checked at beginning of submit_bio_noacct(). If bio needs
to be throttled, it will start the timer and stop submit bio directly.
Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.
But in the current process, if bio is throttled, it will still set bio
issue->value by blkcg_bio_issue_init(). This is redundant and may cause
the above use-after-free.
CPU0 CPU1
submit_bio
submit_bio_noacct
submit_bio_checks
blk_throtl_bio()
<=mod_timer(&sq->pending_timer
blk_throtl_dispatch_work_fn
submit_bio_noacct() <= bio have
throttle tag, will throw directly
and bio issue->value will be set
here
bio_endio()
bio_put()
bio_free() <= free this bio
blkcg_bio_issue_init(bio)
<= bio has been freed and
will lead to UAF
return BLK_QC_T_NONE
Fix this by remove extra blkcg_bio_issue_init.
Fixes:
e439bedf6b24 (blkcg: consolidate bio_issue_init() to be a part of core)
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Link: https://lore.kernel.org/r/20211112093354.3581504-1-qiulaibin@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Like Xu [Wed, 3 Nov 2021 09:17:16 +0000 (17:17 +0800)]
perf/x86/vlbr: Add c->flags to vlbr event constraints
[ Upstream commit
5863702561e625903ec678551cb056a4b19e0b8a ]
Just like what we do in the x86_get_event_constraints(), the
PERF_X86_EVENT_LBR_SELECT flag should also be propagated
to event->hw.flags so that the host lbr driver can save/restore
MSR_LBR_SELECT for the special vlbr event created by KVM or BPF.
Fixes:
097e4311cda9 ("perf/x86: Add constraint to create guest LBR event without hw counter")
Reported-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Wanpeng Li <wanpengli@tencent.com>
Link: https://lore.kernel.org/r/20211103091716.59906-1-likexu@tencent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mathias Krause [Wed, 3 Nov 2021 19:06:13 +0000 (20:06 +0100)]
sched/fair: Prevent dead task groups from regaining cfs_rq's
[ Upstream commit
b027789e5e50494c2325cc70c8642e7fd6059479 ]
Kevin is reporting crashes which point to a use-after-free of a cfs_rq
in update_blocked_averages(). Initial debugging revealed that we've
live cfs_rq's (on_list=1) in an about to be kfree()'d task group in
free_fair_sched_group(). However, it was unclear how that can happen.
His kernel config happened to lead to a layout of struct sched_entity
that put the 'my_q' member directly into the middle of the object
which makes it incidentally overlap with SLUB's freelist pointer.
That, in combination with SLAB_FREELIST_HARDENED's freelist pointer
mangling, leads to a reliable access violation in form of a #GP which
made the UAF fail fast.
Michal seems to have run into the same issue[1]. He already correctly
diagnosed that commit
a7b359fc6a37 ("sched/fair: Correctly insert
cfs_rq's to list on unthrottle") is causing the preconditions for the
UAF to happen by re-adding cfs_rq's also to task groups that have no
more running tasks, i.e. also to dead ones. His analysis, however,
misses the real root cause and it cannot be seen from the crash
backtrace only, as the real offender is tg_unthrottle_up() getting
called via sched_cfs_period_timer() via the timer interrupt at an
inconvenient time.
When unregister_fair_sched_group() unlinks all cfs_rq's from the dying
task group, it doesn't protect itself from getting interrupted. If the
timer interrupt triggers while we iterate over all CPUs or after
unregister_fair_sched_group() has finished but prior to unlinking the
task group, sched_cfs_period_timer() will execute and walk the list of
task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the
dying task group. These will later -- in free_fair_sched_group() -- be
kfree()'ed while still being linked, leading to the fireworks Kevin
and Michal are seeing.
To fix this race, ensure the dying task group gets unlinked first.
However, simply switching the order of unregistering and unlinking the
task group isn't sufficient, as concurrent RCU walkers might still see
it, as can be seen below:
CPU1: CPU2:
: timer IRQ:
: do_sched_cfs_period_timer():
: :
: distribute_cfs_runtime():
: rcu_read_lock();
: :
: unthrottle_cfs_rq():
sched_offline_group(): :
: walk_tg_tree_from(…,tg_unthrottle_up,…):
list_del_rcu(&tg->list); :
(1) : list_for_each_entry_rcu(child, &parent->children, siblings)
: :
(2) list_del_rcu(&tg->siblings); :
: tg_unthrottle_up():
unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)];
: :
list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); :
: :
: if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running)
(3) : list_add_leaf_cfs_rq(cfs_rq);
: :
: :
: :
: :
: :
(4) : rcu_read_unlock();
CPU 2 walks the task group list in parallel to sched_offline_group(),
specifically, it'll read the soon to be unlinked task group entry at
(1). Unlinking it on CPU 1 at (2) therefore won't prevent CPU 2 from
still passing it on to tg_unthrottle_up(). CPU 1 now tries to unlink
all cfs_rq's via list_del_leaf_cfs_rq() in
unregister_fair_sched_group(). Meanwhile CPU 2 will re-add some of
these at (3), which is the cause of the UAF later on.
To prevent this additional race from happening, we need to wait until
walk_tg_tree_from() has finished traversing the task groups, i.e.
after the RCU read critical section ends in (4). Afterwards we're safe
to call unregister_fair_sched_group(), as each new walk won't see the
dying task group any more.
On top of that, we need to wait yet another RCU grace period after
unregister_fair_sched_group() to ensure print_cfs_stats(), which might
run concurrently, always sees valid objects, i.e. not already free'd
ones.
This patch survives Michal's reproducer[2] for 8h+ now, which used to
trigger within minutes before.
[1] https://lore.kernel.org/lkml/
20211011172236.11223-1-mkoutny@suse.com/
[2] https://lore.kernel.org/lkml/
20211102160228.GA57072@blackbody.suse.cz/
Fixes:
a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
[peterz: shuffle code around a bit]
Reported-by: Kevin Tanguy <kevin.tanguy@corp.ovh.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Donnefort [Thu, 4 Nov 2021 17:51:20 +0000 (17:51 +0000)]
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
[ Upstream commit
42dc938a590c96eeb429e1830123fef2366d9c80 ]
Nothing protects the access to the per_cpu variable sd_llc_id. When testing
the same CPU (i.e. this_cpu == that_cpu), a race condition exists with
update_top_cache_domain(). One scenario being:
CPU1 CPU2
==================================================================
per_cpu(sd_llc_id, CPUX) => 0
partition_sched_domains_locked()
detach_destroy_domains()
cpus_share_cache(CPUX, CPUX) update_top_cache_domain(CPUX)
per_cpu(sd_llc_id, CPUX) => 0
per_cpu(sd_llc_id, CPUX) = CPUX
per_cpu(sd_llc_id, CPUX) => CPUX
return false
ttwu_queue_cond() wouldn't catch smp_processor_id() == cpu and the result
is a warning triggered from ttwu_queue_wakelist().
Avoid a such race in cpus_share_cache() by always returning true when
this_cpu == that_cpu.
Fixes:
518cd6234178 ("sched: Only queue remote wakeups when crossing cache boundaries")
Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20211104175120.857087-1-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Wed, 10 Nov 2021 03:09:44 +0000 (19:09 -0800)]
MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression
[ Upstream commit
e2f4b3be1d3c73176db734565b160250cc1300dd ]
For MIPS pre-boot, when CONFIG_KERNEL_ZSTD=y, the decompressor
function uses __bswapdi2(), so this object file should be added to
the target object file.
Fixes these build errors:
mips-linux-ld: arch/mips/boot/compressed/decompress.o: in function `xxh64':
decompress.c:(.text+0x8be0): undefined reference to `__bswapdi2'
mips-linux-ld: decompress.c:(.text+0x8c78): undefined reference to `__bswapdi2'
mips-linux-ld: decompress.c:(.text+0x8d04): undefined reference to `__bswapdi2'
mips-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0xa010): more undefined references to `__bswapdi2' follow
Fixes:
0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Fixes:
cddc40f5617e ("mips: always link byteswap helpers into decompressor")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sat, 6 Nov 2021 15:49:11 +0000 (08:49 -0700)]
mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
[ Upstream commit
5eeaafc8d69373c095e461bdb39e5c9b62228ac5 ]
Several header files need info on CONFIG_32BIT or CONFIG_64BIT,
but kconfig symbol BCM63XX does not provide that info. This leads
to many build errors, e.g.:
arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE'
return x - PAGE_OFFSET + PHYS_OFFSET;
arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE'
return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT'
return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0;
Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be
set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes
CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].)
Fixes:
e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton <paulburton@kernel.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quentin Perret [Mon, 8 Nov 2021 15:46:32 +0000 (15:46 +0000)]
KVM: arm64: Fix host stage-2 finalization
[ Upstream commit
50a8d3315960c74095c59e204db44abd937d4b5d ]
We currently walk the hypervisor stage-1 page-table towards the end of
hyp init in nVHE protected mode and adjust the host page ownership
attributes in its stage-2 in order to get a consistent state from both
point of views. The walk is done on the entire hyp VA space, and expects
to only ever find page-level mappings. While this expectation is
reasonable in the half of hyp VA space that maps memory with a fixed
offset (see the loop in pkvm_create_mappings_locked()), it can be
incorrect in the other half where nothing prevents the usage of block
mappings. For instance, on systems where memory is physically aligned at
an address that happens to maps to a PMD aligned VA in the hyp_vmemmap,
kvm_pgtable_hyp_map() will install block mappings when backing the
hyp_vmemmap, which will later cause finalize_host_mappings() to fail.
Furthermore, it should be noted that all pages backing the hyp_vmemmap
are also mapped in the 'fixed offset range' of the hypervisor, which
implies that finalize_host_mappings() will walk both aliases and update
the host stage-2 attributes twice. The order in which this happens is
unpredictable, though, since the hyp VA layout is highly dependent on
the position of the idmap page, hence resulting in a fragile mess at
best.
In order to fix all of this, let's restrict the finalization walk to
only cover memory regions in the 'fixed-offset range' of the hyp VA
space and nothing else. This not only fixes a correctness issue, but
will also result in a slighlty faster hyp initialization overall.
Fixes:
2c50166c62ba ("KVM: arm64: Mark host bss and rodata section as shared")
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211108154636.393384-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 4 Nov 2021 01:11:55 +0000 (04:11 +0300)]
clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
[ Upstream commit
05cf3ec00d460b50088d421fb878a0f83f57e262 ]
The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096
functioning. If it gets disabled, several subsytems will stop working
(including eMMC/SDCC and USB). There are no in-kernel users of this
clock, so it is much simpler to remove from the kernel.
The clock was first removed in the commit
9e60de1cf270 ("clk: qcom:
Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got
added back in the commit
b567752144e3 ("clk: qcom: Add some missing gcc
clks for msm8996") by Rajendra Nayak.
Let's remove it again in hope that nobody adds it back.
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes:
b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Wed, 22 Sep 2021 23:54:49 +0000 (09:24 +0930)]
clk/ast2600: Fix soc revision for AHB
[ Upstream commit
f45c5b1c27293f834682e89003f88b3512329ab4 ]
Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.
Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.
Fixes:
2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Cercueil [Fri, 1 Oct 2021 17:20:33 +0000 (18:20 +0100)]
clk: ingenic: Fix bugs with divided dividers
[ Upstream commit
ed84ef1cd7eddf933d4ffce2caa8161d6f947245 ]
Two fixes in one:
- In the "impose hardware constraints" block, the "logical" divider
value (aka. not translated to the hardware) was clamped to fit in the
register area, but this totally ignored the fact that the divider
value can itself have a fixed divider.
- The code that made sure that the divider value returned by the
function was a multiple of its own fixed divider could result in a
wrong value being calculated, because it was rounded down instead of
rounded up.
Fixes:
4afe2d1a6ed5 ("clk: ingenic: Allow divider value to be divided")
Co-developed-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211001172033.122329-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Thu, 28 Oct 2021 12:45:08 +0000 (20:45 +0800)]
f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()
[ Upstream commit
ca98d72141dd81f42893a9a43d7ededab3355fba ]
As Pavel Machek reported in [1]
This code looks quite confused: part of function returns 1 on
corruption, part returns -errno. The problem is not stable-specific.
[1] https://lkml.org/lkml/2021/9/19/207
Let's fix to make 'insane cp_payload case' to return 1 rater than
EFSCORRUPTED, so that return value can be kept consistent for all
error cases, it can avoid confusion of code logic.
Fixes:
65ddf6564843 ("f2fs: fix to do sanity check for sb/cp fields correctly")
Reported-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hyeong-Jun Kim [Wed, 27 Oct 2021 04:16:00 +0000 (13:16 +0900)]
f2fs: compress: disallow disabling compress on non-empty compressed file
[ Upstream commit
02d58cd253d7536c412993573fc6b3b4454960eb ]
Compresse file and normal file has differ in i_addr addressing,
specifically addrs per inode/block. So, we will face data loss, if we
disable the compression flag on non-empty files. Therefore we should
disallow not only enabling but disabling the compression flag on
non-empty files.
Fixes:
4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 5 Oct 2021 00:19:13 +0000 (17:19 -0700)]
sh: define __BIG_ENDIAN for math-emu
[ Upstream commit
b929926f01f2d14635345d22eafcf60feed1085e ]
Fix this by defining both ENDIAN macros in
<asm/sfp-machine.h> so that they can be utilized in
<math-emu/soft-fp.h> according to the latter's comment:
/* Allow sfp-machine to have its own byte order definitions. */
(This is what is done in arch/nds32/include/asm/sfp-machine.h.)
This placates these build warnings:
In file included from ../arch/sh/math-emu/math.c:23:
.../include/math-emu/single.h:50:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
50 | #if __BYTE_ORDER == __BIG_ENDIAN
In file included from ../arch/sh/math-emu/math.c:24:
.../include/math-emu/double.h:59:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
59 | #if __BYTE_ORDER == __BIG_ENDIAN
Fixes:
4b565680d163 ("sh: math-emu support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 5 Oct 2021 00:19:12 +0000 (17:19 -0700)]
sh: math-emu: drop unused functions
[ Upstream commit
e25c252a9b033523c626f039d4b9a304f12f6775 ]
Delete ieee_fpe_handler() since it is not used. After that is done,
delete denormal_to_double() since it is not used:
.../arch/sh/math-emu/math.c:505:12: error: 'ieee_fpe_handler' defined but not used [-Werror=unused-function]
505 | static int ieee_fpe_handler(struct pt_regs *regs)
.../arch/sh/math-emu/math.c:477:13: error: 'denormal_to_double' defined but not used [-Werror=unused-function]
477 | static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)
Fixes:
7caf62de25554da3 ("sh: remove unused do_fpu_error")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Tue, 5 Oct 2021 00:19:10 +0000 (17:19 -0700)]
sh: fix kconfig unmet dependency warning for FRAME_POINTER
[ Upstream commit
fda1bc533094a7db68b11e7503d2c6c73993d12a ]
FRAME_POINTER depends on DEBUG_KERNEL so DWARF_UNWINDER should
depend on DEBUG_KERNEL before selecting FRAME_POINTER.
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on [n]: DEBUG_KERNEL [=n] && (M68K || UML || SUPERH [=y]) || ARCH_WANT_FRAME_POINTERS [=n]
Selected by [y]:
- DWARF_UNWINDER [=y]
Fixes:
bd353861c735 ("sh: dwarf unwinder support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Tue, 28 Sep 2021 19:19:14 +0000 (03:19 +0800)]
f2fs: fix wrong condition to trigger background checkpoint correctly
[ Upstream commit
cd6d697a6e2013a0a85f8b261b16c8cfd50c1f5f ]
In f2fs_balance_fs_bg(), it needs to check both NAT_ENTRIES and INO_ENTRIES
memory usage to decide whether we should skip background checkpoint, otherwise
we may always skip checking INO_ENTRIES memory usage, so that INO_ENTRIES may
potentially cause high memory footprint.
Fixes:
493720a48543 ("f2fs: fix to avoid REQ_TIME and CP_TIME collision")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Keoseong Park [Mon, 27 Sep 2021 06:06:48 +0000 (15:06 +0900)]
f2fs: fix to use WHINT_MODE
[ Upstream commit
011e0868e0cf1237675b22e36fffa958fb08f46e ]
Since active_logs can be set to 2 or 4 or NR_CURSEG_PERSIST_TYPE(6),
it cannot be set to NR_CURSEG_TYPE(8).
That is, whint_mode is always off.
Therefore, the condition is changed from NR_CURSEG_TYPE to NR_CURSEG_PERSIST_TYPE.
Cc: Chao Yu <chao@kernel.org>
Fixes:
d0b9e42ab615 (f2fs: introduce inmem curseg)
Reported-by: tanghuan <tanghuan@vivo.com>
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gao Xiang [Tue, 21 Sep 2021 14:37:30 +0000 (22:37 +0800)]
f2fs: fix up f2fs_lookup tracepoints
[ Upstream commit
70a9ac36ffd807ac506ed0b849f3e8ce3c6623f2 ]
Fix up a misuse that the filename pointer isn't always valid in
the ring buffer, and we should copy the content instead.
Fixes:
0c5e36db17f5 ("f2fs: trace f2fs_lookup")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lu Wei [Thu, 26 Nov 2020 02:43:11 +0000 (10:43 +0800)]
maple: fix wrong return value of maple_bus_init().
[ Upstream commit
bde82ee391fa6d3ad054313c4aa7b726d32515ce ]
If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0
rather than error, because the retval is not changed after KMEM_CACHE or
maple_alloc_dev failed.
Fixes:
17be2d2b1c33 ("sh: Add maple bus support for the SEGA Dreamcast.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nick Desaulniers [Tue, 22 Dec 2020 20:54:01 +0000 (12:54 -0800)]
sh: check return code of request_irq
[ Upstream commit
0e38225c92c7964482a8bb6b3e37fde4319e965c ]
request_irq is marked __must_check, but the call in shx3_prepare_cpus
has a void return type, so it can't propagate failure to the caller.
Follow cues from hexagon and just print an error.
Fixes:
c7936b9abcf5 ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.")
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Fri, 29 Oct 2021 15:10:45 +0000 (17:10 +0200)]
powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
[ Upstream commit
c12ab8dbc492b992e1ea717db933cee568780c47 ]
Until now, all tests involving CONFIG_STRICT_KERNEL_RWX were done with
DEBUG_RODATA_TEST to check the result. But now that
CONFIG_STRICT_KERNEL_RWX is selected by default, it came without
CONFIG_DEBUG_RODATA_TEST and led to the following Oops
[ 6.830908] Freeing unused kernel image (initmem) memory: 352K
[ 6.840077] BUG: Unable to handle kernel data access on write at 0xc1285200
[ 6.846836] Faulting instruction address: 0xc0004b6c
[ 6.851745] Oops: Kernel access of bad area, sig: 11 [#1]
[ 6.857075] BE PAGE_SIZE=16K PREEMPT CMPC885
[ 6.861348] SAF3000 DIE NOTIFICATION
[ 6.864830] CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0-rc5-s3k-dev-02255-g2747d7b7916f #451
[ 6.873429] NIP:
c0004b6c LR:
c0004b60 CTR:
00000000
[ 6.878419] REGS:
c902be60 TRAP: 0300 Not tainted (5.15.0-rc5-s3k-dev-02255-g2747d7b7916f)
[ 6.886852] MSR:
00009032 <EE,ME,IR,DR,RI> CR:
53000335 XER:
8000ff40
[ 6.893564] DAR:
c1285200 DSISR:
82000000
[ 6.893564] GPR00:
0c000000 c902bf20 c20f4000 08000000 00000001 04001f00 c1800000 00000035
[ 6.893564] GPR08:
ff0001ff c1280000 00000002 c0004b60 00001000 00000000 c0004b1c 00000000
[ 6.893564] GPR16:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.893564] GPR24:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 c1060000
[ 6.932034] NIP [
c0004b6c] kernel_init+0x50/0x138
[ 6.936682] LR [
c0004b60] kernel_init+0x44/0x138
[ 6.941245] Call Trace:
[ 6.943653] [
c902bf20] [
c0004b60] kernel_init+0x44/0x138 (unreliable)
[ 6.950022] [
c902bf30] [
c001122c] ret_from_kernel_thread+0x5c/0x64
[ 6.956135] Instruction dump:
[ 6.959060]
48ffc521 48045469 4800d8cd 3d20c086 89295fa0 2c090000 41820058 480796c9
[ 6.966890]
4800e48d 3d20c128 39400002 3fe0c106 <
91495200>
3bff8000 4806fa1d 481f7d75
[ 6.974902] ---[ end trace
1e397bacba4aa610 ]---
0xc1285200 corresponds to 'system_state' global var that the kernel is trying to set to
SYSTEM_RUNNING. This var is above the RO/RW limit so it shouldn't Oops.
It oopses because the dirty bit is missing.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3d5800b0bbcd7b19761b98f50421358667b45331.1635520232.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Thu, 14 Oct 2021 02:44:24 +0000 (13:44 +1100)]
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
[ Upstream commit
fef071be57dc43679a32d5b0e6ee176d6f12e9f2 ]
In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:
cmpli cr0,r3,1024
This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.
It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.
dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.
Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:
arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
cmpli 0,%r3,1024; ...
^
Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Peter [Tue, 19 Oct 2021 16:22:53 +0000 (18:22 +0200)]
iommu/dart: Initialize DART_STREAMS_ENABLE
[ Upstream commit
5a009fc1364170b240a4d351b345e69bb3728b3e ]
DART has an additional global register to control which streams are
isolated. This register is a bit redundant since DART_TCR can already
be used to control isolation and is usually initialized to DART_STREAM_ALL
by the time we get control. Some DARTs (namely the one used for the audio
controller) however have some streams disabled initially. Make sure those
work by initializing DART_STREAMS_ENABLE during reset.
Reported-by: Martin Povišer <povik@protonmail.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20211019162253.45919-1-sven@svenpeter.dev
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudiu Beznea [Mon, 11 Oct 2021 11:27:17 +0000 (14:27 +0300)]
clk: at91: sama7g5: remove prescaler part of master clock
[ Upstream commit
facb87ad75603813bc3b1314f5a87377f020fcb8 ]
On SAMA7G5 the prescaler part of master clock has been implemented as a
changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit
must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is
done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has
been discovered that in some conditions the PMC_SR.MCKRDY is not rising
but the rate it provides it's stable. The workaround is to add a timeout
when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler
will be removed from Linux clock tree as all the frequencies for CPU could
be obtained from PLL and also there will be less overhead when changing
frequency via DVFS.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-14-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengfeng Ye [Sun, 24 Oct 2021 11:17:36 +0000 (04:17 -0700)]
ALSA: usb-audio: fix null pointer dereference on pointer cs_desc
[ Upstream commit
b97053df0f04747c3c1e021ecbe99db675342954 ]
The pointer cs_desc return from snd_usb_find_clock_source could
be null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Link: https://lore.kernel.org/r/20211024111736.11342-1-cyeaa@connect.ust.hk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengfeng Ye [Sun, 24 Oct 2021 10:46:11 +0000 (03:46 -0700)]
ALSA: gus: fix null pointer dereference on pointer block
[ Upstream commit
a0d21bb3279476c777434c40d969ea88ca64f9aa ]
The pointer block return from snd_gf1_dma_next_block could be
null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Link: https://lore.kernel.org/r/20211024104611.9919-1-cyeaa@connect.ust.hk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephan Gerhold [Mon, 18 Oct 2021 11:00:08 +0000 (13:00 +0200)]
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
[ Upstream commit
179811bebc7b91e0f9d0adee9bfa3d2af9c43869 ]
According to the new DT schema for qcom,rpm-msg-ram the node name
should be sram@. memory@ is reserved for definition of physical RAM
(usable by Linux).
This fixes the following dtbs_check error on various device trees:
memory@60000: 'device_type' is a required property
From schema: dtschema/schemas/memory.yaml
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Heidelberg [Wed, 20 Oct 2021 21:47:41 +0000 (23:47 +0200)]
ARM: dts: qcom: fix memory and mdio nodes naming for RB3011
[ Upstream commit
14a1f6c9d8017ffbf388e82e1a1f023196d98612 ]
Fixes warnings regarding to memory and mdio nodes and
apply new naming following dt-schema.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anatolij Gustschin [Wed, 13 Oct 2021 22:05:31 +0000 (00:05 +0200)]
powerpc/5200: dts: fix memory node unit name
[ Upstream commit
aed2886a5e9ffc8269a4220bff1e9e030d3d2eb1 ]
Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Osipenko [Tue, 19 Oct 2021 23:15:24 +0000 (02:15 +0300)]
memory: tegra20-emc: Add runtime dependency on devfreq governor module
[ Upstream commit
14b43c20c283de36131da0cb44f3170b9ffa7630 ]
Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq
governor to the list of the Tegra20 EMC driver module softdeps to allow
userspace initramfs tools like dracut to automatically pull the devfreq
module into ramfs image together with the EMC module.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211019231524.888-1-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Wed, 20 Oct 2021 21:14:16 +0000 (14:14 -0700)]
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
[ Upstream commit
af984c87293b19dccbd0b16afc57c5c9a4a279c7 ]
A link bounce to a slow fabric may observe FDISC response delays lasting
longer than devloss tmo. Current logic decrements the final fabric node
kref during a devloss tmo event. This results in a NULL ptr dereference
crash if the FDISC completes for that fabric node after devloss tmo.
Fix by adding the NLP_IN_RECOV_POST_DEV_LOSS flag, which is set when
devloss tmo triggers and we've noticed that fabric node recovery has
already started or finished in between the time lpfc_dev_loss_tmo_callbk
queues lpfc_dev_loss_tmo_handler. If fabric node recovery succeeds, then
the driver reverses the devloss tmo marked kref put with a kref get. If
fabric node recovery fails, then the final kref put relies on the ELS
timing out or the REG_LOGIN cmpl routine.
Link: https://lore.kernel.org/r/20211020211417.88754-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Wed, 20 Oct 2021 21:14:15 +0000 (14:14 -0700)]
scsi: lpfc: Fix link down processing to address NULL pointer dereference
[ Upstream commit
1854f53ccd88ad4e7568ddfafafffe71f1ceb0a6 ]
If an FC link down transition while PLOGIs are outstanding to fabric well
known addresses, outstanding ABTS requests may result in a NULL pointer
dereference. Driver unload requests may hang with repeated "2878" log
messages.
The Link down processing results in ABTS requests for outstanding ELS
requests. The Abort WQEs are sent for the ELSs before the driver had set
the link state to down. Thus the driver is sending the Abort with the
expectation that an ABTS will be sent on the wire. The Abort request is
stalled waiting for the link to come up. In some conditions the driver may
auto-complete the ELSs thus if the link does come up, the Abort completions
may reference an invalid structure.
Fix by ensuring that Abort set the flag to avoid link traffic if issued due
to conditions where the link failed.
Link: https://lore.kernel.org/r/20211020211417.88754-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Wed, 20 Oct 2021 21:14:13 +0000 (14:14 -0700)]
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
[ Upstream commit
79b20beccea3a3938a8500acef4e6b9d7c66142f ]
An error is detected with the following report when unloading the driver:
"KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b"
The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the
flag is not cleared upon completion of the login.
This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set
to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used
as an rpi_ids array index.
Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in
lpfc_mbx_cmpl_fc_reg_login().
Link: https://lore.kernel.org/r/20211020211417.88754-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
wangyugui [Tue, 19 Oct 2021 00:26:56 +0000 (08:26 +0800)]
RDMA/core: Use kvzalloc when allocating the struct ib_port
[ Upstream commit
911a81c9c7092bfd75432ce79b2ef879127ea065 ]
The 'struct attribute' flex array contains some struct lock_class_key's
which become big when lockdep is turned on. Big enough that some drivers
will not load when CONFIG_PROVE_LOCKING=y because they cannot allocate
enough memory:
WARNING: CPU: 36 PID: 8 at mm/page_alloc.c:5350 __alloc_pages+0x27e/0x3e0
Call Trace:
kmalloc_order+0x2a/0xb0
kmalloc_order_trace+0x19/0xf0
__kmalloc+0x231/0x270
ib_setup_port_attrs+0xd8/0x870 [ib_core]
ib_register_device+0x419/0x4e0 [ib_core]
bnxt_re_task+0x208/0x2d0 [bnxt_re]
Link: https://lore.kernel.org/r/20211019002656.17745-1-wangyugui@e16-tech.com
Signed-off-by: wangyugui <wangyugui@e16-tech.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Teng Qi [Mon, 11 Oct 2021 11:40:03 +0000 (19:40 +0800)]
iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()
[ Upstream commit
94be878c882d8d784ff44c639bf55f3b029f85af ]
The length of hw->settings->odr_table is 2 and ref_sensor->id is an enum
variable whose value is between 0 and 5.
However, the value ST_LSM6DSX_ID_MAX (i.e. 5) is not caught properly in
switch (sensor->id) {
If ref_sensor->id is ST_LSM6DSX_ID_MAX, an array overflow will ocurrs in
function st_lsm6dsx_check_odr():
odr_table = &sensor->hw->settings->odr_table[sensor->id];
and in function st_lsm6dsx_set_odr():
reg = &hw->settings->odr_table[ref_sensor->id].reg;
To avoid this array overflow, handle ST_LSM6DSX_ID_GYRO explicitly and
return -EINVAL for the default case.
The enum value ST_LSM6DSX_ID_MAX is only present as an easy way to check
the limit and as such is never used, however this is not locally obvious.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20211011114003.976221-1-starmiku1207184332@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Thu, 30 Sep 2021 02:04:20 +0000 (21:04 -0500)]
scsi: target: Fix alua_tg_pt_gps_count tracking
[ Upstream commit
1283c0d1a32bb924324481586b5d6e8e76f676ba ]
We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.
The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.
It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.
Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Christie [Thu, 30 Sep 2021 02:04:19 +0000 (21:04 -0500)]
scsi: target: Fix ordered tag handling
[ Upstream commit
ed1227e080990ffec5bf39006ec8a57358e6689a ]
This patch fixes the following bugs:
1. If there are multiple ordered cmds queued and multiple simple cmds
completing, target_restart_delayed_cmds() could be called on different
CPUs and each instance could start a ordered cmd. They could then run in
different orders than they were queued.
2. target_restart_delayed_cmds() and target_handle_task_attr() can race
where:
1. target_handle_task_attr() has passed the simple_cmds == 0 check.
2. transport_complete_task_attr() then decrements simple_cmds to 0.
3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
it does not see any cmds on the delayed_cmd_list.
4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.
The cmd will then end up timing out.
3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
them out of order, because target_handle_task_attr() will hit that
simple_cmds check first and return false for all ordered cmds sent.
4. We run target_restart_delayed_cmds() after every cmd completion, so if
there is more than 1 simple cmd running, we start executing ordered cmds
after that first cmd instead of waiting for all of them to complete.
5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
cmds have completed, and not just simple.
6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
for every cmd completion when ordered cmds are almost never used. Just
replacing that lock with an atomic increases IOPs by up to 10% when
completions are spread over multiple CPUs and there are multiple
sessions/ mqs/thread accessing the same device.
This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.
Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ye Bin [Wed, 13 Oct 2021 03:39:13 +0000 (11:39 +0800)]
scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()
[ Upstream commit
f347c26836c270199de1599c3cd466bb7747caa9 ]
The following issue was observed running syzkaller:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr
ffff8880aea95dc8 by task syz-executor.0/9815
CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe4/0x14a lib/dump_stack.c:118
print_address_description+0x73/0x280 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:352 [inline]
kasan_report+0x272/0x370 mm/kasan/report.c:410
memcpy+0x1f/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:377 [inline]
sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
__blk_run_queue_uncond block/blk-core.c:464 [inline]
__blk_run_queue+0x1a4/0x380 block/blk-core.c:484
blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
sg_write+0x64/0xa0 drivers/scsi/sg.c:622
__vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:
00000000e138492c
vfs_write+0x184/0x4c0 fs/read_write.c:549
ksys_write+0x107/0x240 fs/read_write.c:599
do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.
Switch n, alen, and rlen to u32.
Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ye Bin [Wed, 13 Oct 2021 03:39:12 +0000 (11:39 +0800)]
scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()
[ Upstream commit
4e3ace0051e7e504b55d239daab8789dd89b863c ]
The following warning was observed running syzkaller:
[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724] program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr
ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995] dump_stack+0x108/0x15f
[ 3813.847524] print_address_description+0xa5/0x372
[ 3813.848243] kasan_report.cold+0x236/0x2a8
[ 3813.849439] check_memory_region+0x240/0x270
[ 3813.850094] memcpy+0x30/0x80
[ 3813.850553] sg_copy_buffer+0x157/0x1e0
[ 3813.853032] sg_copy_from_buffer+0x13/0x20
[ 3813.853660] fill_from_dev_buffer+0x135/0x370
[ 3813.854329] resp_readcap16+0x1ac/0x280
[ 3813.856917] schedule_resp+0x41f/0x1630
[ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699] scsi_dispatch_cmd+0x330/0x950
[ 3813.863329] scsi_request_fn+0xd8e/0x1710
[ 3813.863946] __blk_run_queue+0x10b/0x230
[ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220] sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637] sg_write+0x6c8/0xef0
[ 3813.878853] __vfs_write+0xe4/0x800
[ 3813.883487] vfs_write+0x17b/0x530
[ 3813.884008] ksys_write+0x103/0x270
[ 3813.886268] __x64_sys_write+0x77/0xc0
[ 3813.886841] do_syscall_64+0x106/0x360
[ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This issue can be reproduced with the following syzkaller log:
r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)
In resp_readcap16() we get "int alloc_len" value -
1104926854, and then pass
the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This
leads to OOB in sg_copy_buffer().
To solve this issue, define alloc_len as u32.
Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Tue, 12 Oct 2021 22:23:12 +0000 (15:23 -0700)]
MIPS: sni: Fix the build
[ Upstream commit
c91cf42f61dc77b289784ea7b15a8531defa41c0 ]
This patch fixes the following gcc 10 build error:
arch/mips/sni/time.c: In function ‘a20r_set_periodic’:
arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow]
15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
| ^
arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’
21 | *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
| ^~~~~~~~~~~~~~~~
Cc: linux-mips@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guanghui Feng [Mon, 11 Oct 2021 14:08:24 +0000 (22:08 +0800)]
tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
[ Upstream commit
3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ]
When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:
Workqueue: events_unbound flush_to_ldisc
Call trace:
dump_backtrace+0x0/0x1ec
show_stack+0x24/0x30
dump_stack+0xd0/0x128
panic+0x15c/0x374
watchdog_timer_fn+0x2b8/0x304
__run_hrtimer+0x88/0x2c0
__hrtimer_run_queues+0xa4/0x120
hrtimer_interrupt+0xfc/0x270
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x84/0xfc
el1_irq+0xc8/0x180
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120
In the testcase pty04, The first process call the write syscall to send
data to the pty master. At the same time, the workqueue will do the
flush_to_ldisc to pop data in a loop until there is no more data left.
When the sender and workqueue running in different core, the sender sends
data fastly in full time which will result in workqueue doing work in loop
for a long time and occuring softlockup in flush_to_ldisc with kernel
configured without preempt. So I add need_resched check and cond_resched
in the flush_to_ldisc loop to avoid it.
Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tvrtko Ursulin [Thu, 14 Oct 2021 05:38:31 +0000 (13:38 +0800)]
iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option
[ Upstream commit
5240aed2cd2594fb392239f11b9681e5e1591619 ]
Handling of intel_iommu kernel command line option should return "true" to
indicate option is valid and so avoid logging it as unknown by the core
parsing code.
Also log unknown sub-options at the notice level to let user know of
potential typos or similar.
Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://lore.kernel.org/r/20210831112947.310080-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20211014053839.727419-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Sat, 16 Oct 2021 06:26:02 +0000 (23:26 -0700)]
ALSA: ISA: not for M68K
[ Upstream commit
3c05f1477e62ea5a0a8797ba6a545b1dc751fb31 ]
On m68k, compiling drivers under SND_ISA causes build errors:
../sound/core/isadma.c: In function 'snd_dma_program':
../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
33 | flags = claim_dma_lock();
| ^~~~~~~~~~~~~~
../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration]
41 | release_dma_lock(flags);
| ^~~~~~~~~~~~~~~~
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare':
../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function)
253 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
| ^~~~~~~~~~~~
../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare':
../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function)
322 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
| ^~~~~~~~~~~~
and more...
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211016062602.3588-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Yang [Tue, 12 Oct 2021 23:58:23 +0000 (18:58 -0500)]
ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
[ Upstream commit
05e63b48b20fa70726be505a7660d1a07bc1cffb ]
We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead. This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Yang [Tue, 12 Oct 2021 23:58:22 +0000 (18:58 -0500)]
ARM: dts: ls1021a: move thermal-zones node out of soc/
[ Upstream commit
1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ]
This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Derek Fang [Thu, 14 Oct 2021 09:40:54 +0000 (17:40 +0800)]
ASoC: rt5682: fix a little pop while playback
[ Upstream commit
4b19e4a77cc6baa0f840e8bae62ab974667f6207 ]
A little pop can be heard obviously from HP while playing a silent.
This patch fixes it by using two functions:
1. Enable HP 1bit output mode.
2. Change the charge pump switch size during playback on and off.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211014094054.811-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Mon, 11 Oct 2021 13:49:20 +0000 (21:49 +0800)]
usb: host: ohci-tmio: check return value after calling platform_get_resource()
[ Upstream commit
9eff2b2e59fda25051ab36cd1cb5014661df657b ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roger Quadros [Thu, 7 Oct 2021 12:08:30 +0000 (15:08 +0300)]
ARM: dts: omap: fix gpmc,mux-add-data type
[ Upstream commit
51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ]
gpmc,mux-add-data is not boolean.
Fixes the below errors flagged by dtbs_check.
"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
William Overton [Sun, 10 Oct 2021 14:58:41 +0000 (15:58 +0100)]
ALSA: usb-audio: Add support for the Pioneer DJM 750MK2 Mixer/Soundcard
[ Upstream commit
6d27788160362a7ee6c0d317636fe4b1ddbe59a7 ]
The kernel already has support for very similar Pioneer djm products
and this work is based on that.
Added device to quirks-table.h and added control info to
mixer_quirks.c.
Tested on my hardware and all working.
Signed-off-by: William Overton <willovertonuk@gmail.com>
Link: https://lore.kernel.org/r/20211010145841.11907-1-willovertonuk@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
José Expósito [Fri, 1 Oct 2021 17:25:14 +0000 (19:25 +0200)]
HID: multitouch: disable sticky fingers for UPERFECT Y
[ Upstream commit
08b9a61a87bc339a73c584d8924c86ab36d204a7 ]
When a finger is on the screen, the UPERFECT Y portable touchscreen
monitor reports a contact in the first place. However, after this
initial report, contacts are not reported at the refresh rate of the
screen as required by the Windows 8 specs.
This behaviour triggers the release_timer, removing the fingers even
though they are still present.
To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the
MT_QUIRK_STICKY_FINGERS quirk for this device.
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luis Chamberlain [Fri, 17 Sep 2021 18:22:13 +0000 (11:22 -0700)]
firmware_loader: fix pre-allocated buf built-in firmware use
[ Upstream commit
f7a07f7b96033df7709042ff38e998720a3f7119 ]
The firmware_loader can be used with a pre-allocated buffer
through the use of the API calls:
o request_firmware_into_buf()
o request_partial_firmware_into_buf()
If the firmware was built-in and present, our current check
for if the built-in firmware fits into the pre-allocated buffer
does not return any errors, and we proceed to tell the caller
that everything worked fine. It's a lie and no firmware would
end up being copied into the pre-allocated buffer. So if the
caller trust the result it may end up writing a bunch of 0's
to a device!
Fix this by making the function that checks for the pre-allocated
buffer return non-void. Since the typical use case is when no
pre-allocated buffer is provided make this return successfully
for that case. If the built-in firmware does *not* fit into the
pre-allocated buffer size return a failure as we should have
been doing before.
I'm not aware of users of the built-in firmware using the API
calls with a pre-allocated buffer, as such I doubt this fixes
any real life issue. But you never know... perhaps some oddball
private tree might use it.
In so far as upstream is concerned this just fixes our code for
correctness.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 21:35:12 +0000 (16:35 -0500)]
ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45
[ Upstream commit
64ba6d2ce72ffde70dc5a1794917bf1573203716 ]
This device is based on SDCA codecs but with a single amplifier
instead of two.
BugLink: https://github.com/thesofproject/linux/issues/3161
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 21:35:11 +0000 (16:35 -0500)]
ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp
[ Upstream commit
f2470679b070a77ea22f8b791fae7084c2340c7d ]
We don't have a configuration for a single amp on link1.
BugLink: https://github.com/thesofproject/linux/issues/3161
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Mon, 4 Oct 2021 21:35:09 +0000 (16:35 -0500)]
ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec
[ Upstream commit
9d36ceab94151f07cf3fcb067213ac87937adf12 ]
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
Co-developed-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Frieder Schrempf [Thu, 30 Sep 2021 15:56:30 +0000 (17:56 +0200)]
arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY
[ Upstream commit
315e7b884190a6c9c28e95ad3b724dde9e922b99 ]
According to the datasheet the VSC8531 PHY expects a reset pulse of 100 ns
and a delay of 15 ms after the reset has been deasserted. Set the matching
values in the devicetree.
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mahesh Rajashekhara [Tue, 28 Sep 2021 23:54:33 +0000 (18:54 -0500)]
scsi: smartpqi: Add controller handshake during kdump
[ Upstream commit
9ee5d6e9ac52a3c8625697535f8e35864d9fd38c ]
Correct kdump hangs when controller is locked up.
There are occasions when a controller reboot (controller soft reset) is
issued when a controller firmware crash dump is in progress.
This leads to incomplete controller firmware crash dump:
- When the controller crash dump is in progress, and a kdump is initiated,
the driver issues inbound doorbell reset to bring back the controller in
SIS mode.
- If the controller is in locked up state, the inbound doorbell reset does
not work causing controller initialization failures. This results in the
driver hanging waiting for SIS mode.
To avoid an incomplete controller crash dump, add in a controller crash
dump handshake:
- Controller will indicate start and end of the controller crash dump by
setting some register bits.
- Driver will look these bits when a kdump is initiated. If a controller
crash dump is in progress, the driver will wait for the controller crash
dump to complete before issuing the controller soft reset then complete
driver initialization.
Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guo Zhi [Wed, 29 Sep 2021 12:25:37 +0000 (20:25 +0800)]
scsi: advansys: Fix kernel pointer leak
[ Upstream commit
d4996c6eac4c81b8872043e9391563f67f13e406 ]
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.
Change %lx to %p to print the hashed pointer.
Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 2 Oct 2021 21:14:57 +0000 (23:14 +0200)]
ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect
[ Upstream commit
92d3360108f1839ca40451bad20ff67dd24a1964 ]
Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.
And add an entry for the Cyberbook T116 tablet to the DMI table, so that
jack-detection will work properly on this tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211002211459.110124-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 3 Oct 2021 13:22:55 +0000 (15:22 +0200)]
ASoC: rt5651: Use IRQF_NO_AUTOEN when requesting the IRQ
[ Upstream commit
6e037b72cf4ea6c28a131ea021d63ee4e7e6fa64 ]
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.
This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 3 Oct 2021 13:22:54 +0000 (15:22 +0200)]
ASoC: es8316: Use IRQF_NO_AUTOEN when requesting the IRQ
[ Upstream commit
1cf2aa665901054b140eb71748661ceae99b6b5a ]
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.
This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Riedmueller [Mon, 27 Sep 2021 07:28:56 +0000 (09:28 +0200)]
clk: imx: imx6ul: Move csi_sel mux to correct base register
[ Upstream commit
2f9d61869640f732599ec36b984c2b5c46067519 ]
The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.
Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.
Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geraldo Nascimento [Thu, 30 Sep 2021 19:40:14 +0000 (16:40 -0300)]
ALSA: usb-audio: disable implicit feedback sync for Behringer UFX1204 and UFX1604
[ Upstream commit
28c369e60827f706cef4604a3e2848198f25bd26 ]
Behringer UFX1204 and UFX1604 have Synchronous endpoints to which
current ALSA code applies implicit feedback sync as if they were
Asynchronous endpoints. This breaks UAC compliance and is unneeded.
The commit
5e35dc0338d85ccebacf3f77eca1e5dea73155e8 and subsequent
1a15718b41df026cffd0e42cfdc38a1384ce19f9 were meant to clear up noise.
Unfortunately, noise persisted for those using higher sample rates and
this was only solved by commit
d2e8f641257d0d3af6e45d6ac2d6f9d56b8ea964
Since there are no more reports of noise, let's get rid of the
implicit-fb quirks breaking UAC compliance.
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/YVYSnoQ7nxLXT0Dq@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Damien Le Moal [Fri, 20 Aug 2021 07:02:53 +0000 (16:02 +0900)]
scsi: core: Fix scsi_mode_sense() buffer length handling
[ Upstream commit
17b49bcbf8351d3dbe57204468ac34f033ed60bc ]
Several problems exist with scsi_mode_sense() buffer length handling:
1) The allocation length field of the MODE SENSE(10) command is 16-bits,
occupying bytes 7 and 8 of the CDB. With this command, access to mode
pages larger than 255 bytes is thus possible. However, the CDB
allocation length field is set by assigning len to byte 8 only, thus
truncating buffer length larger than 255.
2) If scsi_mode_sense() is called with len smaller than 8 with
sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length
is increased to 8 and 4 respectively, and the buffer is zero filled
with these increased values, thus corrupting the memory following the
buffer.
Fix these 2 problems by using put_unaligned_be16() to set the allocation
length field of MODE SENSE(10) CDB and by returning an error when len is
too small.
Furthermore, if len is larger than 255B, always try MODE SENSE(10) first,
even if the device driver did not set sdev->use_10_for_ms. In case of
invalid opcode error for MODE SENSE(10), access to mode pages larger than
255 bytes are not retried using MODE SENSE(6). To avoid buffer length
overflows for the MODE_SENSE(10) case, check that len is smaller than 65535
bytes.
While at it, also fix the folowing:
* Use get_unaligned_be16() to retrieve the mode data length and block
descriptor length fields of the mode sense reply header instead of using
an open coded calculation.
* Fix the kdoc dbd argument explanation: the DBD bit stands for Disable
Block Descriptor, which is the opposite of what the dbd argument
description was.
Link: https://lore.kernel.org/r/20210820070255.682775-2-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Fri, 24 Sep 2021 19:24:17 +0000 (14:24 -0500)]
ASoC: SOF: Intel: hda-dai: fix potential locking issue
[ Upstream commit
a20f3b10de61add5e14b6ce4df982f4df2a4cbbc ]
The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210924192417.169243-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Pearson [Tue, 14 Sep 2021 16:42:05 +0000 (11:42 -0500)]
RDMA/rxe: Separate HW and SW l/rkeys
[ Upstream commit
001345339f4ca85790a1644a74e33ae77ac116be ]
Separate software and simulated hardware lkeys and rkeys for MRs and MWs.
This makes struct ib_mr and struct ib_mw isolated from hardware changes
triggered by executing work requests.
This change fixes a bug seen in blktest.
Link: https://lore.kernel.org/r/20210914164206.19768-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuldeep Singh [Thu, 9 Sep 2021 11:12:29 +0000 (16:42 +0530)]
arm64: dts: ls1012a: Add serial alias for ls1012a-rdb
[ Upstream commit
7f31ae6e01da140e34d6513815253e811019f016 ]
U-boot atempts to read serial alias value for ls1012a-rdb but couldn't
do so as it is not initialised and thus, FDT_ERR_NOTFOUND error is
reported while booting linux.
Loading fdt from FIT Image at
a0000000 ...
Description: ls1012ardb-dtb
Type: Flat Device Tree
Data Start: 0xab111474
Data Size: 11285 Bytes = 11 KiB
Architecture: AArch64
Load Address: 0x90000000
Loading fdt from 0xab111474 to 0x90000000
Booting using the fdt blob at 0x90000000
Uncompressing Kernel Image
Loading Device Tree to
000000008fffa000, end
000000008ffffc14 ... OK
WARNING: fdt_fixup_stdout: could not read serial0 alias: FDT_ERR_NOTFOUND
NOTICE: RNG: INSTANTIATED
Starting kernel ...
Fix the above error by specifying serial value to duart.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Thu, 26 Aug 2021 12:35:28 +0000 (14:35 +0200)]
arm64: dts: freescale: fix arm,sp805 compatible string
[ Upstream commit
99a7cacc66cae92db40139b57689be2af75fc6b8 ]
According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
compatible = "arm,sp805", "arm,primecell";
The current compatible string doesn't exist at all. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shawn Guo [Sun, 29 Aug 2021 11:16:28 +0000 (19:16 +0800)]
arm64: dts: qcom: sdm845: Fix qcom,controlled-remotely property
[ Upstream commit
1c8bf398b6b51eb085a49036ad8f9c000171cce1 ]
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-4-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shawn Guo [Sun, 29 Aug 2021 11:16:27 +0000 (19:16 +0800)]
arm64: dts: qcom: ipq8074: Fix qcom,controlled-remotely property
[ Upstream commit
8c97f0ac4dc8f1743eb8e8a49f66189e13ae45e9 ]
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-3-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shawn Guo [Sun, 29 Aug 2021 11:16:26 +0000 (19:16 +0800)]
arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property
[ Upstream commit
3509de752ea14c7e5781b3a56a4a0bf832f5723a ]
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-2-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
AngeloGioacchino Del Regno [Wed, 1 Sep 2021 18:31:21 +0000 (20:31 +0200)]
arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency
[ Upstream commit
3f1dcaff642e75c1d2ad03f783fa8a3b1f56dd50 ]
The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.
This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.
This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Lamparter [Sat, 18 Sep 2021 17:29:30 +0000 (19:29 +0200)]
ARM: BCM53016: Specify switch ports for Meraki MR32
[ Upstream commit
6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ]
the switch identifies itself as a BCM53012 (rev 5)...
This patch has been tested & verified on OpenWrt's
snapshot with Linux 5.10 (didn't test any older kernels).
The MR32 is able to "talk to the network" as before with
OpenWrt's SWITCHDEV b53 driver.
| b53-srab-switch
18007000.ethernet-switch: found switch: BCM53012, rev 5
| libphy: dsa slave smi: probed
| b53-srab-switch
18007000.ethernet-switch poe (uninitialized):
| PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
| b53-srab-switch
18007000.ethernet-switch: Using legacy PHYLIB callbacks.
| Please migrate to PHYLINK!
| DSA: tree 0 setup
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 20 Sep 2021 14:55:02 +0000 (16:55 +0200)]
staging: rtl8723bs: remove a third possible deadlock
[ Upstream commit
bdc1bbdbaa92df19a14d4c1902088c8432b46c6f ]
The assoc_timer takes the pmlmepriv->lock and various functions which
take the pmlmepriv->scanned_queue.lock first take the pmlmepriv->lock,
this means that we cannot have code which waits for the timer
(timer_del_sync) while holding the pmlmepriv->scanned_queue.lock
to avoid a triangle deadlock:
[ 363.139361] ======================================================
[ 363.139377] WARNING: possible circular locking dependency detected
[ 363.139396] 5.15.0-rc1+ #470 Tainted: G C E
[ 363.139413] ------------------------------------------------------
[ 363.139424] RTW_CMD_THREAD/2466 is trying to acquire lock:
[ 363.139441]
ffffbacd00699038 (&pmlmepriv->lock){+.-.}-{2:2}, at: _rtw_join_timeout_handler+0x3c/0x160 [r8723bs]
[ 363.139598]
but task is already holding lock:
[ 363.139610]
ffffbacd00128ea0 ((&pmlmepriv->assoc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x260
[ 363.139673]
which lock already depends on the new lock.
[ 363.139684]
the existing dependency chain (in reverse order) is:
[ 363.139696]
-> #2 ((&pmlmepriv->assoc_timer)){+.-.}-{0:0}:
[ 363.139734] del_timer_sync+0x59/0x100
[ 363.139762] rtw_joinbss_event_prehandle+0x342/0x640 [r8723bs]
[ 363.139870] report_join_res+0xdf/0x110 [r8723bs]
[ 363.139980] OnAssocRsp+0x17a/0x200 [r8723bs]
[ 363.140092] rtw_recv_entry+0x190/0x1120 [r8723bs]
[ 363.140209] rtl8723b_process_phy_info+0x3f9/0x750 [r8723bs]
[ 363.140318] tasklet_action_common.constprop.0+0xe8/0x110
[ 363.140345] __do_softirq+0xde/0x485
[ 363.140372] __irq_exit_rcu+0xd0/0x100
[ 363.140393] irq_exit_rcu+0xa/0x20
[ 363.140413] common_interrupt+0x83/0xa0
[ 363.140440] asm_common_interrupt+0x1e/0x40
[ 363.140463] finish_task_switch.isra.0+0x157/0x3d0
[ 363.140492] __schedule+0x447/0x1880
[ 363.140516] schedule+0x59/0xc0
[ 363.140537] smpboot_thread_fn+0x161/0x1c0
[ 363.140565] kthread+0x143/0x160
[ 363.140585] ret_from_fork+0x22/0x30
[ 363.140614]
-> #1 (&pmlmepriv->scanned_queue.lock){+.-.}-{2:2}:
[ 363.140653] _raw_spin_lock_bh+0x34/0x40
[ 363.140675] rtw_free_network_queue+0x31/0x80 [r8723bs]
[ 363.140776] rtw_sitesurvey_cmd+0x79/0x1e0 [r8723bs]
[ 363.140869] rtw_cfg80211_surveydone_event_callback+0x3cf/0x470 [r8723bs]
[ 363.140973] rdev_scan+0x42/0x1a0 [cfg80211]
[ 363.141307] nl80211_trigger_scan+0x566/0x660 [cfg80211]
[ 363.141635] genl_family_rcv_msg_doit+0xcd/0x110
[ 363.141661] genl_rcv_msg+0xce/0x1c0
[ 363.141680] netlink_rcv_skb+0x50/0xf0
[ 363.141699] genl_rcv+0x24/0x40
[ 363.141717] netlink_unicast+0x16d/0x230
[ 363.141736] netlink_sendmsg+0x22b/0x450
[ 363.141755] sock_sendmsg+0x5e/0x60
[ 363.141781] ____sys_sendmsg+0x22f/0x270
[ 363.141803] ___sys_sendmsg+0x81/0xc0
[ 363.141828] __sys_sendmsg+0x49/0x80
[ 363.141851] do_syscall_64+0x3b/0x90
[ 363.141873] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 363.141895]
-> #0 (&pmlmepriv->lock){+.-.}-{2:2}:
[ 363.141930] __lock_acquire+0x1158/0x1de0
[ 363.141954] lock_acquire+0xb5/0x2b0
[ 363.141974] _raw_spin_lock_bh+0x34/0x40
[ 363.141993] _rtw_join_timeout_handler+0x3c/0x160 [r8723bs]
[ 363.142097] call_timer_fn+0x94/0x260
[ 363.142122] __run_timers.part.0+0x1bf/0x290
[ 363.142147] run_timer_softirq+0x26/0x50
[ 363.142171] __do_softirq+0xde/0x485
[ 363.142193] __irq_exit_rcu+0xd0/0x100
[ 363.142215] irq_exit_rcu+0xa/0x20
[ 363.142235] sysvec_apic_timer_interrupt+0x72/0x90
[ 363.142260] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 363.142283] __module_address.part.0+0x0/0xd0
[ 363.142309] is_module_address+0x25/0x40
[ 363.142334] static_obj+0x4f/0x60
[ 363.142361] lockdep_init_map_type+0x47/0x220
[ 363.142382] __init_swait_queue_head+0x45/0x60
[ 363.142408] mmc_wait_for_req+0x4a/0xc0 [mmc_core]
[ 363.142504] mmc_wait_for_cmd+0x55/0x70 [mmc_core]
[ 363.142592] mmc_io_rw_direct+0x75/0xe0 [mmc_core]
[ 363.142691] sdio_writeb+0x2e/0x50 [mmc_core]
[ 363.142788] _sd_cmd52_write+0x62/0x80 [r8723bs]
[ 363.142885] sd_cmd52_write+0x6c/0xb0 [r8723bs]
[ 363.142981] rtl8723bs_set_hal_ops+0x982/0x9b0 [r8723bs]
[ 363.143089] rtw_write16+0x1e/0x30 [r8723bs]
[ 363.143184] SetHwReg8723B+0xcc9/0xd30 [r8723bs]
[ 363.143294] mlmeext_joinbss_event_callback+0x17a/0x1a0 [r8723bs]
[ 363.143405] rtw_joinbss_event_callback+0x11/0x20 [r8723bs]
[ 363.143507] mlme_evt_hdl+0x4d/0x70 [r8723bs]
[ 363.143620] rtw_cmd_thread+0x168/0x3c0 [r8723bs]
[ 363.143712] kthread+0x143/0x160
[ 363.143732] ret_from_fork+0x22/0x30
[ 363.143757]
other info that might help us debug this:
[ 363.143768] Chain exists of:
&pmlmepriv->lock --> &pmlmepriv->scanned_queue.lock --> (&pmlmepriv->assoc_timer)
[ 363.143809] Possible unsafe locking scenario:
[ 363.143819] CPU0 CPU1
[ 363.143831] ---- ----
[ 363.143841] lock((&pmlmepriv->assoc_timer));
[ 363.143862] lock(&pmlmepriv->scanned_queue.lock);
[ 363.143882] lock((&pmlmepriv->assoc_timer));
[ 363.143902] lock(&pmlmepriv->lock);
[ 363.143921]
*** DEADLOCK ***
Make rtw_joinbss_event_prehandle() release the scanned_queue.lock before
it deletes the timer to avoid this (it is still holding pmlmepriv->lock
protecting against racing the timer).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 20 Sep 2021 14:55:01 +0000 (16:55 +0200)]
staging: rtl8723bs: remove a second possible deadlock
[ Upstream commit
a7ac783c338bafc04d3259600646350dba989043 ]
Lockdep complains about rtw_free_assoc_resources() taking the sta_hash_lock
followed by it calling rtw_free_stainfo() which takes xmitpriv->lock.
While the rtl8723bs_xmit_thread takes the sta_hash_lock while already
holding the xmitpriv->lock:
[ 103.849756] ======================================================
[ 103.849761] WARNING: possible circular locking dependency detected
[ 103.849767] 5.15.0-rc1+ #470 Tainted: G C E
[ 103.849773] ------------------------------------------------------
[ 103.849776] wpa_supplicant/695 is trying to acquire lock:
[ 103.849781]
ffffa5d0c0562b00 (&pxmitpriv->lock){+.-.}-{2:2}, at: rtw_free_stainfo+0x8a/0x510 [r8723bs]
[ 103.849840]
but task is already holding lock:
[ 103.849843]
ffffa5d0c05636a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2}, at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[ 103.849881]
which lock already depends on the new lock.
[ 103.849884]
the existing dependency chain (in reverse order) is:
[ 103.849887]
-> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[ 103.849898] _raw_spin_lock_bh+0x34/0x40
[ 103.849913] rtw_get_stainfo+0x93/0x110 [r8723bs]
[ 103.849948] rtw_make_wlanhdr+0x14a/0x270 [r8723bs]
[ 103.849983] rtw_xmitframe_coalesce+0x5c/0x6c0 [r8723bs]
[ 103.850019] rtl8723bs_xmit_thread+0x4ac/0x620 [r8723bs]
[ 103.850050] kthread+0x143/0x160
[ 103.850058] ret_from_fork+0x22/0x30
[ 103.850067]
-> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[ 103.850077] __lock_acquire+0x1158/0x1de0
[ 103.850084] lock_acquire+0xb5/0x2b0
[ 103.850090] _raw_spin_lock_bh+0x34/0x40
[ 103.850095] rtw_free_stainfo+0x8a/0x510 [r8723bs]
[ 103.850130] rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[ 103.850159] PHY_IQCalibrate_8723B+0x122b/0x36a0 [r8723bs]
[ 103.850189] cfg80211_disconnect+0x173/0x320 [cfg80211]
[ 103.850331] nl80211_disconnect+0x6e/0xb0 [cfg80211]
[ 103.850422] genl_family_rcv_msg_doit+0xcd/0x110
[ 103.850430] genl_rcv_msg+0xce/0x1c0
[ 103.850435] netlink_rcv_skb+0x50/0xf0
[ 103.850441] genl_rcv+0x24/0x40
[ 103.850446] netlink_unicast+0x16d/0x230
[ 103.850452] netlink_sendmsg+0x22b/0x450
[ 103.850457] sock_sendmsg+0x5e/0x60
[ 103.850465] ____sys_sendmsg+0x22f/0x270
[ 103.850472] ___sys_sendmsg+0x81/0xc0
[ 103.850479] __sys_sendmsg+0x49/0x80
[ 103.850485] do_syscall_64+0x3b/0x90
[ 103.850493] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 103.850500]
other info that might help us debug this:
[ 103.850504] Possible unsafe locking scenario:
[ 103.850507] CPU0 CPU1
[ 103.850510] ---- ----
[ 103.850512] lock(&pstapriv->sta_hash_lock);
[ 103.850518] lock(&pxmitpriv->lock);
[ 103.850524] lock(&pstapriv->sta_hash_lock);
[ 103.850530] lock(&pxmitpriv->lock);
[ 103.850535]
*** DEADLOCK ***
Push the taking of sta_hash_lock down into rtw_free_stainfo(),
where the critical section is, this allows taking the lock after
rtw_free_stainfo() has released pxmitpriv->lock.
This requires changing rtw_free_all_stainfo() so that it does its freeing
in 2 steps, first moving all stainfo-s to free to a local list while
holding the sta_hash_lock and then walking that list to call
rtw_free_stainfo() on them without holding the sta_hash_lock.
Pushing the taking of sta_hash_lock down into rtw_free_stainfo(),
also fixes a whole bunch of callers of rtw_free_stainfo() which
were not holding that lock even though they should.
Note that this also fixes the deadlock from the "remove possible
deadlock when disconnect" patch in a different way. But the
changes from that patch offer a nice locking cleanup regardless.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Aiuto [Mon, 20 Sep 2021 14:55:00 +0000 (16:55 +0200)]
staging: rtl8723bs: remove possible deadlock when disconnect (v2)
[ Upstream commit
54659ca026e586bbb33a7e60daa6443a3ac6b5df ]
when turning off a connection, lockdep complains with the
following warning (a modprobe has been done but the same
happens with a disconnection from NetworkManager,
it's enough to trigger a cfg80211_disconnect call):
[ 682.855867] ======================================================
[ 682.855877] WARNING: possible circular locking dependency detected
[ 682.855887] 5.14.0-rc6+ #16 Tainted: G C OE
[ 682.855898] ------------------------------------------------------
[ 682.855906] modprobe/1770 is trying to acquire lock:
[ 682.855916]
ffffb6d000332b00 (&pxmitpriv->lock){+.-.}-{2:2},
at: rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.856073]
but task is already holding lock:
[ 682.856081]
ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[ 682.856207]
which lock already depends on the new lock.
[ 682.856215]
the existing dependency chain (in reverse order) is:
[ 682.856223]
-> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[ 682.856247] _raw_spin_lock_bh+0x34/0x40
[ 682.856265] rtw_get_stainfo+0x9a/0x110 [r8723bs]
[ 682.856389] rtw_xmit_classifier+0x27/0x130 [r8723bs]
[ 682.856515] rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[ 682.856642] rtl8723bs_hal_xmit+0x3b/0xb0 [r8723bs]
[ 682.856752] rtw_xmit+0x4ef/0x890 [r8723bs]
[ 682.856879] _rtw_xmit_entry+0xba/0x350 [r8723bs]
[ 682.856981] dev_hard_start_xmit+0xee/0x320
[ 682.856999] sch_direct_xmit+0x8c/0x330
[ 682.857014] __dev_queue_xmit+0xba5/0xf00
[ 682.857030] packet_sendmsg+0x981/0x1b80
[ 682.857047] sock_sendmsg+0x5b/0x60
[ 682.857060] __sys_sendto+0xf1/0x160
[ 682.857073] __x64_sys_sendto+0x24/0x30
[ 682.857087] do_syscall_64+0x3a/0x80
[ 682.857102] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 682.857117]
-> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[ 682.857142] __lock_acquire+0xfd9/0x1b50
[ 682.857158] lock_acquire+0xb4/0x2c0
[ 682.857172] _raw_spin_lock_bh+0x34/0x40
[ 682.857185] rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.857308] rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[ 682.857415] cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[ 682.857522] cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[ 682.857759] cfg80211_leave+0x2b/0x40 [cfg80211]
[ 682.857961] cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[ 682.858163] raw_notifier_call_chain+0x41/0x50
[ 682.858180] __dev_close_many+0x62/0x100
[ 682.858195] dev_close_many+0x7d/0x120
[ 682.858209] unregister_netdevice_many+0x416/0x680
[ 682.858225] unregister_netdevice_queue+0xab/0xf0
[ 682.858240] unregister_netdev+0x18/0x20
[ 682.858255] rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[ 682.858360] rtw_dev_remove+0x24/0xd0 [r8723bs]
[ 682.858463] sdio_bus_remove+0x31/0xd0 [mmc_core]
[ 682.858532] device_release_driver_internal+0xf7/0x1d0
[ 682.858550] driver_detach+0x47/0x90
[ 682.858564] bus_remove_driver+0x77/0xd0
[ 682.858579] rtw_drv_halt+0xc/0x678 [r8723bs]
[ 682.858685] __x64_sys_delete_module+0x13f/0x250
[ 682.858699] do_syscall_64+0x3a/0x80
[ 682.858715] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 682.858729]
other info that might help us debug this:
[ 682.858737] Possible unsafe locking scenario:
[ 682.858744] CPU0 CPU1
[ 682.858751] ---- ----
[ 682.858758] lock(&pstapriv->sta_hash_lock);
[ 682.858772] lock(&pxmitpriv->lock);
[ 682.858786] lock(&pstapriv->sta_hash_lock);
[ 682.858799] lock(&pxmitpriv->lock);
[ 682.858812]
*** DEADLOCK ***
[ 682.858820] 5 locks held by modprobe/1770:
[ 682.858831] #0:
ffff8d870697d980 (&dev->mutex){....}-{3:3},
at: device_release_driver_internal+0x1a/0x1d0
[ 682.858869] #1:
ffffffffbdbbf1c8 (rtnl_mutex){+.+.}-{3:3},
at: unregister_netdev+0xe/0x20
[ 682.858906] #2:
ffff8d87054ee5e8 (&rdev->wiphy.mtx){+.+.}-{3:3},
at: cfg80211_netdev_notifier_call+0x9e/0x560 [cfg80211]
[ 682.859131] #3:
ffff8d870f2bc8f0 (&wdev->mtx){+.+.}-{3:3},
at: cfg80211_leave+0x20/0x40 [cfg80211]
[ 682.859354] #4:
ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[ 682.859482]
stack backtrace:
[ 682.859491] CPU: 1 PID: 1770 Comm: modprobe Tainted: G
C OE 5.14.0-rc6+ #16
[ 682.859507] Hardware name: LENOVO 80NR/Madrid, BIOS DACN25WW 08/20/2015
[ 682.859517] Call Trace:
[ 682.859531] dump_stack_lvl+0x56/0x6f
[ 682.859551] check_noncircular+0xdb/0xf0
[ 682.859579] __lock_acquire+0xfd9/0x1b50
[ 682.859606] lock_acquire+0xb4/0x2c0
[ 682.859623] ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.859752] ? mark_held_locks+0x48/0x70
[ 682.859769] ? rtw_free_stainfo+0x4a/0x4a0 [r8723bs]
[ 682.859898] _raw_spin_lock_bh+0x34/0x40
[ 682.859914] ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.860039] rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.860171] rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[ 682.860286] cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[ 682.860397] cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[ 682.860629] cfg80211_leave+0x2b/0x40 [cfg80211]
[ 682.860836] cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[ 682.861048] ? __lock_acquire+0x4dc/0x1b50
[ 682.861070] ? lock_is_held_type+0xa8/0x110
[ 682.861089] ? lock_is_held_type+0xa8/0x110
[ 682.861104] ? find_held_lock+0x2d/0x90
[ 682.861120] ? packet_notifier+0x173/0x300
[ 682.861141] ? lock_release+0xb3/0x250
[ 682.861160] ? packet_notifier+0x192/0x300
[ 682.861184] raw_notifier_call_chain+0x41/0x50
[ 682.861205] __dev_close_many+0x62/0x100
[ 682.861224] dev_close_many+0x7d/0x120
[ 682.861245] unregister_netdevice_many+0x416/0x680
[ 682.861264] ? find_held_lock+0x2d/0x90
[ 682.861284] unregister_netdevice_queue+0xab/0xf0
[ 682.861306] unregister_netdev+0x18/0x20
[ 682.861325] rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[ 682.861434] rtw_dev_remove+0x24/0xd0 [r8723bs]
[ 682.861542] sdio_bus_remove+0x31/0xd0 [mmc_core]
[ 682.861615] device_release_driver_internal+0xf7/0x1d0
[ 682.861637] driver_detach+0x47/0x90
[ 682.861656] bus_remove_driver+0x77/0xd0
[ 682.861674] rtw_drv_halt+0xc/0x678 [r8723bs]
[ 682.861782] __x64_sys_delete_module+0x13f/0x250
[ 682.861801] ? lockdep_hardirqs_on_prepare+0xf3/0x170
[ 682.861817] ? syscall_enter_from_user_mode+0x20/0x70
[ 682.861836] do_syscall_64+0x3a/0x80
[ 682.861855] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 682.861873] RIP: 0033:0x7f6dbe85400b
[ 682.861890] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89
01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa
b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d
1e 0c 00 f7 d8 64 89 01 48
[ 682.861906] RSP: 002b:
00007ffe7a82f538 EFLAGS:
00000206 ORIG_RAX:
00000000000000b0
[ 682.861923] RAX:
ffffffffffffffda RBX:
000055a64693bd20 RCX:
00007f6dbe85400b
[ 682.861935] RDX:
0000000000000000 RSI:
0000000000000800 RDI:
000055a64693bd88
[ 682.861946] RBP:
000055a64693bd20 R08:
0000000000000000 R09:
0000000000000000
[ 682.861957] R10:
00007f6dbe8c7ac0 R11:
0000000000000206 R12:
000055a64693bd88
[ 682.861967] R13:
0000000000000000 R14:
000055a64693bd88 R15:
00007ffe7a831848
This happens because when we enqueue a frame for
transmission we do it under xmit_priv lock, then calling
rtw_get_stainfo (needed for enqueuing) takes sta_hash_lock
and this leads to the following lock dependency:
xmit_priv->lock -> sta_hash_lock
Turning off a connection will bring to call
rtw_free_assoc_resources which will set up
the inverse dependency:
sta_hash_lock -> xmit_priv_lock
This could lead to a deadlock as lockdep complains.
Fix it by removing the xmit_priv->lock around
rtw_xmitframe_enqueue call inside rtl8723bs_hal_xmit
and put it in a smaller critical section inside
rtw_xmit_classifier, the only place where
xmit_priv data are actually accessed.
Replace spin_{lock,unlock}_bh(pxmitpriv->lock)
in other tx paths leading to rtw_xmitframe_enqueue
call with spin_{lock,unlock}_bh(psta->sleep_q.lock)
- it's not clear why accessing a sleep_q was protected
by a spinlock on xmitpriv->lock.
This way is avoided the same faulty lock nesting
order.
Extra changes in v2 by Hans de Goede:
-Lift the taking of the struct __queue.lock spinlock out of
rtw_free_xmitframe_queue() into the callers this allows also
protecting a bunch of related state in rtw_free_stainfo():
-Protect psta->sleepq_len on rtw_free_xmitframe_queue(&psta->sleep_q);
-Protect struct tx_servq.tx_pending and tx_servq.qcnt when
calling rtw_free_xmitframe_queue(&tx_servq.sta_pending)
-This also allows moving the spin_lock_bh(&pxmitpriv->lock); to below
the sleep_q free-ing code, avoiding another ABBA locking issue
CC: Larry Finger <Larry.Finger@lwfinger.net>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Tested-on: Lenovo Ideapad MiiX 300-10IBY
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Thu, 3 Jun 2021 22:00:04 +0000 (00:00 +0200)]
ARM: dts: ux500: Skomer regulator fixes
[ Upstream commit
7aee0288beab72cdfa35af51f62e94373fca595d ]
AUX2 has slightly wrong voltage and AUX5 doesn't need to be
always on.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Peter [Tue, 14 Sep 2021 14:02:35 +0000 (16:02 +0200)]
usb: typec: tipd: Remove WARN_ON in tps6598x_block_read
[ Upstream commit
b7a0a63f3fed57d413bb857de164ea9c3984bc4e ]
Calling tps6598x_block_read with a higher than allowed len can be
handled by just returning an error. There's no need to crash systems
with panic-on-warn enabled.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210914140235.65955-3-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 15 Sep 2021 03:49:25 +0000 (11:49 +0800)]
usb: musb: tusb6010: check return value after calling platform_get_resource()
[ Upstream commit
14651496a3de6807a17c310f63c894ea0c5d858e ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210915034925.2399823-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 21 Sep 2021 09:42:25 +0000 (12:42 +0300)]
bus: ti-sysc: Use context lost quirk for otg
[ Upstream commit
9067839ff45a528bcb015cc2f24f656126b91e3f ]
Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of
SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss
in a more generic way.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 21 Sep 2021 09:42:25 +0000 (12:42 +0300)]
bus: ti-sysc: Add quirk handling for reinit on context lost
[ Upstream commit
9d881361206ebcf6285c2ec2ef275aff80875347 ]
Some interconnect target modules such as otg and gpmc on am335x need a
re-init after resume. As we also have PM runtime cases where the context
may be lost, let's handle these all with cpu_pm.
For the am335x resume path, we already have cpu_pm_resume() call
cpu_pm_cluster_exit().
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Selvin Xavier [Wed, 15 Sep 2021 12:32:42 +0000 (05:32 -0700)]
RDMA/bnxt_re: Check if the vlan is valid before reporting
[ Upstream commit
6bda39149d4b8920fdb8744090653aca3daa792d ]
When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.
Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Mon, 30 Aug 2021 16:51:13 +0000 (18:51 +0200)]
arm64: dts: hisilicon: fix arm,sp805 compatible string
[ Upstream commit
894d4f1f77d0e88f1f81af2e1e37333c1c41b631 ]
According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
compatible = "arm,sp805", "arm,primecell";
The current compatible string doesn't exist at all. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthias Brugger [Thu, 15 Jul 2021 16:41:01 +0000 (18:41 +0200)]
arm64: dts: rockchip: Disable CDN DP on Pinebook Pro
[ Upstream commit
2513fa5c25d42f55ca5f0f0ab247af7c9fbfa3b1 ]
The CDN DP needs a PHY and a extcon to work correctly. But no extcon is
provided by the device-tree, which leads to an error:
cdn-dp
fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
cdn-dp: probe of
fec00000.dp failed with error -22
Disable the CDN DP to make graphic work on the Pinebook Pro.
Reported-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20210715164101.11486-1-matthias.bgg@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bixuan Cui [Sat, 11 Sep 2021 08:12:46 +0000 (16:12 +0800)]
ASoC: mediatek: mt8195: Add missing of_node_put()
[ Upstream commit
b2fc2c92d2fd34d93268f677e514936f50dd6b5c ]
The platform_node is returned by of_parse_phandle() should have
of_node_put() before return.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210911081246.33867-1-cuibixuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Smart [Fri, 10 Sep 2021 23:31:46 +0000 (16:31 -0700)]
scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
[ Upstream commit
99154581b05c8fb22607afb7c3d66c1bace6aa5d ]
When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output. The job is then added to a
completions list for cancellation.
Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter. If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.
Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.
Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ajish Koshy [Mon, 6 Sep 2021 17:04:04 +0000 (22:34 +0530)]
scsi: pm80xx: Fix memory leak during rmmod
[ Upstream commit
51e6ed83bb4ade7c360551fa4ae55c4eacea354b ]
Driver failed to release all memory allocated. This would lead to memory
leak during driver removal.
Properly free memory when the module is removed.
Link: https://lore.kernel.org/r/20210906170404.5682-5-Ajish.Koshy@microchip.com
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Thu, 19 Aug 2021 12:26:06 +0000 (14:26 +0200)]
arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus
[ Upstream commit
6cf9f70255b90b540b9cbde062f18fea29024a75 ]
This fixes following error for every bcm4908 DTS file:
bus@
ff800000: reboot: {'type': 'object'} is not allowed for {'compatible': ['syscon-reboot'], 'regmap': [[15]], 'offset': [[52]], 'mask': [[1]]}
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthew Hagan [Sun, 29 Aug 2021 22:37:48 +0000 (22:37 +0000)]
ARM: dts: NSP: Fix mpcore, mmc node names
[ Upstream commit
15a563d008ef9d04df525f0c476cd7d7127bb883 ]
Running dtbs_check yielded the issues with bcm-nsp.dtsi.
Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@
19000000: $nodename:0: 'mpcore@
19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log