drm/bridge: tc358767: give VSDELAY some positive value

The documentation is not clear about how this delay works.
Empirical tests have shown that with a VSDELAY of 0, the first
scanline is not properly formatted in the output stream when
DSI->DP mode is used. The calculation spreadsheets from Toshiba
seem to always make this value equal to the HFP + 10 for DSI->DP
use-case. For DSI->DPI this value should be > 2 and for DPI->DP
it seems to always be 0x64.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Marek Vasut <marex@denx.de> # TC9595
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230721165328.3968759-2-l.stach@pengutronix.de

drm/bridge: tc358767: increase PLL lock time delay

The PLL often fails to lock with this delay. The new value was
determined by trial and error increasing the delay bit by bit
until the error did not occurr anymore even after several tries.
Then double that value was taken as the minimum delay to be safe.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de> # TC9595
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230721165328.3968759-1-l.stach@pengutronix.de

drm/arm/komeda: Remove component framework and add a simple encoder

The Komeda driver always expects the remote connector node to initialize
an encoder. It uses the component aggregator framework which consists
of component->bind() calls used to initialize the remote encoder and attach
it to the crtc. This makes it incompatible with connector drivers which
implement drm_bridge APIs.

Remove all component framework calls from the komeda driver and declare and
attach an encoder inside komeda_crtc_add().

The remote connector driver has to implement the DRM bridge APIs which
can be used to glue the encoder to the remote connector. Since we
usually pair this with a component encoder that also implements a
drm_bridge, dropping support is not expected to affect users of this
driver.

Signed-off-by: Faiz Abbas <faiz.abbas@arm.com>
Message-ID: <20230712064937.25192-1-faiz.abbas@arm.com>
[small white space fixes flagged by checkpatch.pl]
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712064937.25192-1-faiz.abbas@arm.com

drm: adv7511: Fix low refresh rate register for ADV7533/5

For ADV7533 and ADV7535 low refresh rate is selected using
bits [3:2] of 0x4a main register.
So depending on ADV model write 0xfb or 0x4a register.

Fixes: 2437e7cd88e8 ("drm/bridge: adv7533: Initial support for ADV7533")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719060143.63649-1-alex@shruggie.ro

drm: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org

gpu/host1x: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174549.4056675-1-robh@kernel.org

gpu: host1x: Stop open-coding of_device_uevent()

There is apparently no reasons to open-code of_device_uevent() besides:
- The helper receives a struct device while we want to use the of_node
  member of the struct device *parent*.
- of_device_uevent() could not be called by modules because of a missing
  EXPORT_SYMBOL*().

In practice, the former point is not very constraining, just calling
of_device_uevent(dev->parent, ...) would have made the trick.

The latter point is more an observation rather than a real blocking
point because nothing prevented of_uevent() (called by the inline
function of_device_uevent()) to be exported to modules. In practice,
this helper is now exported, so nothing prevent us from using
of_device_uevent() anymore.

Let's use the core helper directly instead of open-coding it.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230622213214.3586530-3-miquel.raynal@bootlin.com

of: module: Export of_device_uevent()

The content of of_device_uevent() is currently hardcoded in a driver
that can be compiled as a module. Nothing prevents of_device_uevent() to
be exported to modules, most of the other helpers in of/device.c
actually are. The reason why this helper was not exported is because it
has been so far only useful in drivers/base, which is built-in anyway.

With the idea of getting rid of the hardcoded implementation of
of_device_uevent() in other places in the kernel, let's export it to GPL
modules (very much like its cousins in the same file).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230622213214.3586530-2-miquel.raynal@bootlin.com

drm: debugfs: Silence warning from cast

Casting a pointer to an integer of a different size generates a warning
from the compiler. First cast the pointer to a pointer-sized type to
keep the compiler happy.

Fixes: 4f66feeab173 ("drm: debugfs: provide infrastructure to dump a DRM GPU VA space")
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/010b58cd-1225-02f7-33f0-c678e5cd349d@arm.com

drm: manager: Fix printk format for size_t

sizeof() returns a size_t which may be different to an unsigned long.
Use the correct format specifier of '%zu' to prevent compiler warnings.

Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings")
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2bf64010-c40a-8b84-144c-5387412b579e@arm.com

drm/panel: simple: Drop prepared_time

This has been superseded by RPM in commit
3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare")
and the last user of the non-RPM case has been dropped in commit
b6d5ffce11dd ("drm/panel-simple: Non-eDP panels don't need "HPD" handling")
whatever is left in this driver is just assigned and never used.
Drop the remaining parts.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709162253.464299-1-marex@denx.de

drm/syncobj: add IOCTL to register an eventfd

Introduce a new DRM_IOCTL_SYNCOBJ_EVENTFD IOCTL which signals an
eventfd from a syncobj.

This is useful for Wayland compositors to handle wait-before-submit.
Wayland clients can send a timeline point to the compositor
before the point has materialized yet, then compositors can wait
for the point to materialize via this new IOCTL.

The existing DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT IOCTL is not suitable
because it blocks. Compositors want to integrate the wait with
their poll(2)-based event loop.

Requirements for new uAPI:

- User-space patch: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4262
- IGT: https://lists.freedesktop.org/archives/igt-dev/2023-July/057893.html

v2:
- Wait for fence when flags is zero
- Improve documentation (Pekka)
- Rename IOCTL (Christian)
- Fix typo in drm_syncobj_add_eventfd() (Christian)

v3:
- Link user-space + IGT patches
- Add reference from overview docs

v4: fix IOCTL number conflict with GETFB2 (Nicholas Choi, Vitaly Prosyak)

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: James Jones <jajones@nvidia.com>
Cc: Austin Shafer <ashafer@nvidia.com>
Cc: Vitaly Prosyak <vprosyak@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714111257.11940-1-contact@emersion.fr

drm: debugfs: provide infrastructure to dump a DRM GPU VA space

This commit adds a function to dump a DRM GPU VA space and a macro for
drivers to register the struct drm_info_list 'gpuvas' entry.

Most likely, most drivers might maintain one DRM GPU VA space per struct
drm_file, but there might also be drivers not having a fixed relation
between DRM GPU VA spaces and a DRM core infrastructure, hence we need the
indirection via the driver iterating it's maintained DRM GPU VA spaces.

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-3-dakr@redhat.com

drm: manager to keep track of GPUs VA mappings

Add infrastructure to keep track of GPU virtual address (VA) mappings
with a decicated VA space manager implementation.

New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers
start implementing, allow userspace applications to request multiple and
arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is
intended to serve the following purposes in this context.

1) Provide infrastructure to track GPU VA allocations and mappings,
   using an interval tree (RB-tree).

2) Generically connect GPU VA mappings to their backing buffers, in
   particular DRM GEM objects.

3) Provide a common implementation to perform more complex mapping
   operations on the GPU VA space. In particular splitting and merging
   of GPU VA mappings, e.g. for intersecting mapping requests or partial
   unmap requests.

Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Donald Robson <donald.robson@imgtec.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-2-dakr@redhat.com

drm/bridge: anx7625: Use common macros for HDCP capabilities

The DRM DP code has macros for the DP HDCP capabilities. Use them in the
anx7625 driver instead of raw numbers.

Fixes: cd1637c7e480 ("drm/bridge: anx7625: add HDCP support")
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091203.1874317-1-wenst@chromium.org

drm/bridge: anx7625: Use common macros for DP power sequencing commands

The DRM DP code has macros for the DP power sequencing commands. Use
them in the anx7625 driver instead of raw numbers.

Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream")
Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal status")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710090929.1873646-1-wenst@chromium.org

drm/file: use explicit values for enum drm_minor_type

This makes it clearer that the values cannot be changed because
they are ABI.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by:James Zhu <James.Zhu@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714104557.518457-2-contact@emersion.fr

drm/drv: use enum drm_minor_type when appropriate

This makes it easier to figure out what the "type" variable can be
set to when reading the implementation of these functions.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by:James Zhu <James.Zhu@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714104557.518457-1-contact@emersion.fr

drm/panel: ld9040: Register a backlight device

Register a backlight device to be able to switch between all the gamma
levels.

v2: Remove .get_brightness() callback, use bl_get_data() and
    backlight_get_brightness()

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230708084027.18352-3-paul@crapouillou.net

drm/panel: ld9040: Use better magic values

I have no idea what the prior magic values mean, and I have no idea
what my replacement (extracted from [1]) magic values mean.

What I do know, is that these new values result in a much better
picture, where the blacks are really black (as you would expect on an
AMOLED display) instead of grey-ish.

[1]: https://github.com/dorimanx/Dorimanx-SG2-I9100-Kernel/blob/master-jelly-bean/arch/arm/mach-exynos/u1-panel.h

v2: Remove spurious new line

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230708084027.18352-2-paul@crapouillou.net

drm/ssd130x: Change pixel format used to compute the buffer size

The commit e254b584dbc0 ("drm/ssd130x: Remove hardcoded bits-per-pixel in
ssd130x_buf_alloc()") used a pixel format info rather than a hardcoded bpp
to calculate the size of the buffer allocated to store the native pixels.

But it wrongly used the DRM_FORMAT_C1 fourcc pixel format. That is for
color-indexed frame buffer formats, while the ssd103x controllers don't
support different single-channel colors nor a Color Lookup Table (CLUT).

So the correct pixel format to use in this case is DRM_FORMAT_R1 instead.

Since both formats use a eight pixels/byte, there is no functional change
in practice by this patch. Still, the correct pixel format should be used.

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713085859.907127-1-javierm@redhat.com

drm/loongson: Remove a useless check in cursor_plane_atomic_async_check()

Because smatch warnings:

drivers/gpu/drm/loongson/lsdc_plane.c:199
lsdc_cursor_plane_atomic_async_check()
warn: variable dereferenced before check 'state' (see line 180)

vim +/state +199 drivers/gpu/drm/loongson/lsdc_plane.c

174  static int
     lsdc_cursor_plane_atomic_async_check(struct drm_plane *plane,
175                                       struct drm_atomic_state *state)
176  {
177          struct drm_plane_state *new_state;
178          struct drm_crtc_state *crtc_state;
179
180          new_state = drm_atomic_get_new_plane_state(state, plane);
                                                        ^^^^^
state is dereferenced inside this function

181
182  if (!plane->state || !plane->state->fb) {
183          drm_dbg(plane->dev, "%s: state is NULL\n", plane->name);
184                  return -EINVAL;
185  }
186
187  if (new_state->crtc_w != new_state->crtc_h) {
188          drm_dbg(plane->dev, "unsupported cursor size: %ux%u\n",
189                  new_state->crtc_w, new_state->crtc_h);
190          return -EINVAL;
191  }
192
193  if (new_state->crtc_w != 64 && new_state->crtc_w != 32) {
194          drm_dbg(plane->dev, "unsupported cursor size: %ux%u\n",
195                  new_state->crtc_w, new_state->crtc_h);
196          return -EINVAL;
197  }
198
199  if (state) {
         ^^^^^
Checked too late!

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202307100423.rV7D05Uq-lkp@intel.com/
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710102411.257970-1-suijingfeng@loongson.cn

drm/amdgpu: use the new drm_exec object for CS v3

Use the new component here as well and remove the old handling.

v2: drop dupplicate handling
v3: fix memory leak pointed out by Tatsuyuki

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-7-christian.koenig@amd.com

drm/amdgpu: use drm_exec for MES testing

Start using the new component here as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-6-christian.koenig@amd.com

drm/amdgpu: use drm_exec for GEM and CSA handling v2

Start using the new component here as well.

v2: ignore duplicates to allow per VM BO mappings

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-5-christian.koenig@amd.com

drm/amdkfd: switch over to using drm_exec v3

Avoids quite a bit of logic and kmalloc overhead.

v2: fix multiple problems pointed out by Felix
v3: two more nit picks from Felix fixed

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-4-christian.koenig@amd.com

drm: add drm_exec selftests v4

Exercise at least all driver facing functions of this new component.

v2: add array test as well
v3: some kunit cleanups
v4: more tests and cleanups

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-3-christian.koenig@amd.com

drm: execution context for GEM buffers v7

This adds the infrastructure for an execution context for GEM buffers
which is similar to the existing TTMs execbuf util and intended to replace
it in the long term.

The basic functionality is that we abstracts the necessary loop to lock
many different GEM buffers with automated deadlock and duplicate handling.

v2: drop xarray and use dynamic resized array instead, the locking
    overhead is unnecessary and measurable.
v3: drop duplicate tracking, radeon is really the only one needing that.
v4: fixes issues pointed out by Danilo, some typos in comments and a
    helper for lock arrays of GEM objects.
v5: some suggestions by Boris Brezillon, especially just use one retry
    macro, drop loop in prepare_array, use flags instead of bool
v6: minor changes suggested by Thomas, Boris and Danilo
v7: minor typos pointed out by checkpatch.pl fixed

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711133122.3710-2-christian.koenig@amd.com

fbdev/hyperv_fb: Include <linux/screen_info.h>

Include <linux/screen_info.h> to get the global screen_info state.
Fixes the following errors:

>> drivers/video/fbdev/hyperv_fb.c:1033:10: error: use of undeclared identifier 'screen_info'
    1033 |                 base = screen_info.lfb_base;
         |                        ^
   drivers/video/fbdev/hyperv_fb.c:1034:10: error: use of undeclared identifier 'screen_info'
    1034 |                 size = screen_info.lfb_size;
 |                        ^
>> drivers/video/fbdev/hyperv_fb.c:1080:3: error: must use 'struct' tag to refer to type 'screen_info'
    1080 |                 screen_info.lfb_size = 0;
 |                 ^
 |                 struct
>> drivers/video/fbdev/hyperv_fb.c:1080:14: error: expected identifier or '('
    1080 |                 screen_info.lfb_size = 0;
 |                            ^
   drivers/video/fbdev/hyperv_fb.c:1081:3: error: must use 'struct' tag to refer to type 'screen_info'
    1081 |                 screen_info.lfb_base = 0;
 |                 ^
 |                 struct
   drivers/video/fbdev/hyperv_fb.c:1081:14: error: expected identifier or '('
    1081 |                 screen_info.lfb_base = 0;
 |                            ^
   drivers/video/fbdev/hyperv_fb.c:1082:3: error: must use 'struct' tag to refer to type 'screen_info'
    1082 |                 screen_info.orig_video_isVGA = 0;
 |                 ^
 |                 struct
    drivers/video/fbdev/hyperv_fb.c:1082:14: error: expected identifier or '('
    1082 |                 screen_info.orig_video_isVGA = 0;
 |                            ^
    8 errors generated.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307101042.rqehuauj-lkp@intel.com/
Fixes: 8b0d13545b09 ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "K. Y. Srinivasan" <kys@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Haiyang Zhang <haiyangz@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Wei Liu <wei.liu@kernel.org> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Dexuan Cui <decui@microsoft.com> (supporter:Hyper-V/Azure CORE AND DRIVERS)
Cc: Helge Deller <deller@gmx.de> (maintainer:FRAMEBUFFER LAYER)
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-efi@vger.kernel.org
Cc: linux-hyperv@vger.kernel.org (open list:Hyper-V/Azure CORE AND DRIVERS)
Cc: linux-fbdev@vger.kernel.org (open list:FRAMEBUFFER LAYER)
Cc: dri-devel@lists.freedesktop.org (open list:FRAMEBUFFER LAYER)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710075848.23087-1-tzimmermann@suse.de

drm/arm: Make ARM devices menu depend on DRM

Otherwise if CONFIG_DRM is disabled, menuconfig will show an empty menu.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230703230534.997525-4-javierm@redhat.com

drm/ttm: Use init_on_free to delay release TTM BOs

Delay release TTM BOs when the kernel default setting is init_on_free.
This offloads the overhead of clearing the system memory to the work
item and potentially a different CPU. This could be very beneficial when
the application does a lot of malloc/free style allocations of system
memory.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Link: https://patchwork.freedesktop.org/patch/msgid/20230708011355.853-1-rajneesh.bhardwaj@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/bridge: cdns-mhdp8546: Fix the interrupt enable/disable

When removing the tidss driver, there is a warning reported by
kernel about an unhandled interrupt for mhdp driver.

[   43.238895] irq 31: nobody cared (try booting with the "irqpoll" option)
... [snipped backtrace]
[   43.330735] handlers:
[   43.333020] [<000000005367c4f9>] irq_default_primary_handler threaded [<000000007e02b601>]
cdns_mhdp_irq_handler [cdns_mhdp8546]
[   43.344607] Disabling IRQ #31

This happens because as part of cdns_mhdp_bridge_hpd_disable, driver tries
to disable the interrupts. While disabling the SW_EVENT interrupts,
it accidentally enables the MBOX interrupts, which are not handled by
the driver.

Fix this with a read-modify-write to update only required bits.
Use the enable / disable function as required in other places.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-9-a-bhatia1@ti.com

drm/tidss: Update encoder/bridge chain connect model

With the new encoder/bridge chain model, the display controller driver
is required to create a drm_connector entity instead of asking the
bridge to do so during drm_bridge_attach. Moreover, the controller
driver should create a drm_bridge entity to negotiate bus formats and a
'simple' drm_encoder entity to expose it to userspace.

Update the encoder/bridge initialization sequence in tidss as per the
new model.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-8-a-bhatia1@ti.com

drm/bridge: sii902x: Set input_bus_flags in atomic_check

input_bus_flags are specified in drm_bridge_timings (legacy) as well
as drm_bridge_state->input_bus_cfg.flags

The flags from the timings will be deprecated. Bridges are supposed
to validate and set the bridge state flags from atomic_check.

Implement atomic_check hook for the same.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-7-a-bhatia1@ti.com

drm/bridge: sii902x: Support format negotiation hooks

With new connector model, sii902x will not create the connector, when
DRM_BRIDGE_ATTACH_NO_CONNECTOR is set and SoC driver will rely on format
negotiation to setup the encoder format.

Support format negotiations hooks in the drm_bridge_funcs.
Use helper functions for state management.

Input format is selected to MEDIA_BUS_FMT_RGB888_1X24 as default, as is
the case with older model.

Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-6-a-bhatia1@ti.com

drm/bridge: mhdp8546: Set input_bus_flags from atomic_check

input_bus_flags are specified in drm_bridge_timings (legacy) as well
as drm_bridge_state->input_bus_cfg.flags

The flags from the timings will be deprecated. Bridges are supposed
to validate and set the bridge state flags from atomic_check.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
[a-bhatia1: replace timings in cdns_mhdp_platform_info by input_bus_flags]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-5-a-bhatia1@ti.com

drm/bridge: mhdp8546: Add minimal format negotiation

With new connector model, mhdp bridge will not create the connector and
SoC driver will rely on format negotiation to setup the encoder format.

Support minimal format negotiations hooks in the drm_bridge_funcs.
Complete format negotiation can be added based on EDID data.
This patch adds the minimal required support to avoid failure
after moving to new connector model.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
[a-bhatia1: Drop the output_fmt check condition]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-4-a-bhatia1@ti.com

drm/bridge: tfp410: Set input_bus_flags in atomic_check

input_bus_flags are specified in drm_bridge_timings (legacy) as well
as drm_bridge_state->input_bus_cfg.flags

The flags from the timings will be deprecated. Bridges are supposed
to validate and set the bridge state flags from atomic_check.

Implement atomic_check hook for the same.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-3-a-bhatia1@ti.com

drm/bridge: tfp410: Support format negotiation hooks

With new connector model, tfp410 will not create the connector and
SoC driver will rely on format negotiation to setup the encoder format.

Support format negotiations hooks in the drm_bridge_funcs.
Use helper functions for state management.

Input format is the one selected by the bridge from DT properties.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
[a-bhatia1: Removed output fmt condition check]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-2-a-bhatia1@ti.com

drm/bridge: tc358767: Use devm_clk_get_enabled() helper

The devm_clk_get_enabled() helper:
   - calls devm_clk_get()
   - calls clk_prepare_enable() and registers what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids the need of a dedicated function used
with devm_add_action_or_reset().

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/208a15ce4e01973daf039ad7bc0f9241f650b3af.1672415956.git.christophe.jaillet@wanadoo.fr

drm/nouveau/disp: use drm_kms_helper_connector_hotplug_event()

This adds more information to the hotplug uevent and lets user-space
know that it's about a particular connector only.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230620181547.272476-1-contact@emersion.fr

nouveau/dispnv50: add cursor pitch check

The hardware needs a FB which is packed. Add checks to make sure
this is the case.

While at it, add debug logs for the existing checks. This allows
user-space to more easily figure out why a configuration is
rejected.

v2:
- Use drm_format_info instead of hardcoding bytes-per-pixel (Ilia)
- Remove unnecessary size check (Ilia)

v3:
- Add missing newlines in debug messages (Lyude)
- Use NV_ATOMIC (Lyude)
- Add missing debug log for invalid format (Ilia)

v4: add plane name in debug messages (Ilia)

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205224140.28174-1-contact@emersion.fr

drm/virtio: Conditionally allocate virtio_gpu_fence

We don't want to create a fence for every command submission.  It's
only necessary when userspace provides a waitable token for submission.
This could be:

1) bo_handles, to be used with VIRTGPU_WAIT
2) out_fence_fd, to be used with dma_fence apis
3) a ring_idx provided with VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK
   + DRM event API
4) syncobjs in the future

The use case for just submitting a command to the host, and expecting
no response.  For example, gfxstream has GFXSTREAM_CONTEXT_PING that
just wakes up the host side worker threads.  There's also
CROSS_DOMAIN_CMD_SEND which just sends data to the Wayland server.

This prevents the need to signal the automatically created
virtio_gpu_fence.

In addition, VIRTGPU_EXECBUF_RING_IDX is checked when creating a
DRM event object.  VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK is
already defined in terms of per-context rings.  It was theoretically
possible to create a DRM event on the global timeline (ring_idx == 0),
if the context enabled DRM event polling.  However, that wouldn't
work and userspace (Sommelier).  Explicitly disallow it for
clarity.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # edited coding style
Link: https://patchwork.freedesktop.org/patch/msgid/20230707213124.494-1-gurchetansingh@chromium.org

drm/hyperv: Fix a compilation issue because of not including screen_info.h

Fixes the following build errors on arm64:

drivers/video/fbdev/hyperv_fb.c: In function 'hvfb_getmem':
>> drivers/video/fbdev/hyperv_fb.c:1033:24: error: 'screen_info' undeclared (first use in this function)
    1033 |                 base = screen_info.lfb_base;
         |                        ^~~~~~~~~~~
drivers/video/fbdev/hyperv_fb.c:1033:24: note: each undeclared identifier is reported only once for each function it appears in

>> drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: error: 'screen_info' undeclared (first use in this function)
      75 |         drm_aperture_remove_conflicting_framebuffers(screen_info.lfb_base,
 |                                                      ^~~~~~~~~~~
drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: note: each undeclared identifier is reported only once for each function it appears in

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307090823.nxnT8Kk5-lkp@intel.com/
Fixes: 81d2393485f0 ("fbdev/hyperv-fb: Do not set struct fb_info.apertures")
Fixes: 8b0d13545b09 ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709100514.703759-1-suijingfeng@loongson.cn

fbdev/xen-fbfront: Generate deferred I/O ops

Use the existing generator macros to create deferred-I/O helpers
for xen-fbfront and set them in the fb_ops structure. Functions
for damage handling on memory ranges and areas are provided by
the driver.

Xen-fbfront's implementation of fb_write writes to system memory,
so the generated code can use the respective helper internally.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-11-tzimmermann@suse.de

fbdev/xen-fbfront: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from XEN_FBDEV_FRONTEND in favor of the existing identical selection.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-10-tzimmermann@suse.de

fbdev/ssd1307fb: Generate deferred I/O ops

Use the existing generator macros to create deferred-I/O helpers
for ssd1307fb and set them in the fb_ops structure. Functions
for damage handling on memory ranges and areas are provided by
the driver.

Ssd1307fb's implementation of fb_write writes to system memory,
so the generated code can use the respective helper internally.
This also fixes a long-standing bug where fb_write returned an
errno code instead of the number of written bytes. See the commit
message of commit 921b7383f348 ("fbdev: Return number of bytes
read or written") for more details.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-9-tzimmermann@suse.de

fbdev/ssd1307fb: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from FB_SSD1307 in favor of the existing identical selection.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-8-tzimmermann@suse.de

fbdev/metronomefb: Generate deferred I/O ops

Use the existing generator macros to create deferred-I/O helpers
for metronomefb and set them in the fb_ops structure. Functions
for damage handling on memory ranges and areas are provided by
the driver.

Metronomefb's implementation of fb_write writes to system memory,
so the generated code can use the respective helper internally.
This also fixes a long-standing bug where fb_write returned an
errno code instead of the number of written bytes. See the commit
message of commit 921b7383f348 ("fbdev: Return number of bytes
read or written") for more details.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-7-tzimmermann@suse.de

fbdev/metronomefb: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from FB_METRONOME in favor of the existing identical selection.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-6-tzimmermann@suse.de

fbdev/hecubafb: Generate deferred I/O ops

Use the existing generator macros to create deferred-I/O helpers
for hecubafb and set them in the fb_ops structure. Functions
for damage handling on memory ranges and areas are provided by
the driver.

Hecubafb's implementation of fb_write writes to system memory,
so the generated code can use the respective helper internally.
This also fixes a long-standing bug where fb_write returned an
errno code instead of the number of written bytes. See the commit
message of commit 921b7383f348 ("fbdev: Return number of bytes
read or written") for more details.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-5-tzimmermann@suse.de

fbdev/hecubafb: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from FB_HECUBA.

Deferred I/O helpers were previously selected by n411, which builds
upon hecubafb. Remove these select statements in favor of the new one.
N411 does not implement any framebuffer I/O by itself.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-4-tzimmermann@suse.de

fbdev/broadsheetfb: Generate deferred I/O ops

Use the existing generator macros to create deferred-I/O helpers
for broadsheetfb and set them in the fb_ops structure. Functions
for damage handling on memory ranges and areas are provided by
the driver.

Broadsheedfb's implementation of fb_write writes to system memory,
so the generated code can use the respective helper internally.
This also fixes a long-standing bug where fb_write returned an
errno code instead of the number of written bytes. See the commit
message of commit 921b7383f348 ("fbdev: Return number of bytes
read or written") for more details.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-3-tzimmermann@suse.de

fbdev/broadsheetfb: Select FB_SYS_HELPERS_DEFERRED

The Kconfig token FB_SYS_HELPERS_DEFERRED selects everything that
is required for deferred I/O on system-memory framebuffers. Select
it from FB_BROADSHEET in favor of the existing identical selection.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706151432.20674-2-tzimmermann@suse.de

staging/sm750fb: Do not include <linux/screen_info.h>

The sm750fb driver does not need anything from <linux/screen_info.h>.
Remove the include statements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706104852.27451-5-tzimmermann@suse.de

sysfb: Do not include <linux/screen_info.h> from sysfb header

The header file <linux/sysfb.h> does not need anything from
<linux/screen_info.h>. Declare struct screen_info and remove
the include statements.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706104852.27451-4-tzimmermann@suse.de

fbdev/sm712fb: Do not include <linux/screen_info.h>

Sm712fb's dependency on <linux/screen_info.h> is artificial in that
it only uses struct screen_info for its internals. Replace the use of
struct screen_info with a custom data structure and remove the include
of <linux/screen_info.h>.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706104852.27451-3-tzimmermann@suse.de

efi: Do not include <linux/screen_info.h> from EFI header

The header file <linux/efi.h> does not need anything from
<linux/screen_info.h>. Declare struct screen_info and remove
the include statements. Update a number of source files that
require struct screen_info's definition.

v2:
* update loongarch (Jingfeng)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706104852.27451-2-tzimmermann@suse.de

accel/ivpu: Add fw_name file to debugfs

Add information about currently used firmware, makes test
automation of different firmware images easier.

Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524074847.866711-6-stanislaw.gruszka@linux.intel.com

accel/ivpu: Print firmware name and version

Firmware file name and version are very important for debugging
customer issues - print them as INFO level message instead
of DEBUG message that is turned off by default.

Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524074847.866711-5-stanislaw.gruszka@linux.intel.com

accel/ivpu: Add debugfs files for testing device reset

Add new debugfs files to validate device recovery functionality.

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524074847.866711-4-stanislaw.gruszka@linux.intel.com

accel/ivpu: Add firmware tracing support

Add support for firmware tracing and logging via debugfs.

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524074847.866711-3-stanislaw.gruszka@linux.intel.com

accel/ivpu: Initial debugfs support

Add initial debugfs support. Provide below functionality:

- print buffer objects
- print latest boot mode
- trigger vpu engine reset

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524074847.866711-2-stanislaw.gruszka@linux.intel.com

drm/nouveau/disp: drop unused argument in nv50_dp_mode_valid

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628212248.3798605-2-kherbst@redhat.com

drm/nouveau/kms: don't call drm_dp_cec_set_edid() on TMDS

RM complains very loudly at the aux transaction attempts.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-10-skeggsb@gmail.com

drm/nouveau/nvif: fix potential double-free

DRM cleanup paths unconditionally call nvif_mmu_dtor() for clients,
which would result in a double-free if nvif_mmu_ctor()'d previously
failed.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-9-skeggsb@gmail.com

drm/nouveau/fifo/ga100-: add per-runlist nonstall intr handling

GSP-RM will enforce this, so implement on HW too so we can share code.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-8-skeggsb@gmail.com

drm/nouveau/fifo/ga100-: remove individual runlists rather than failing oneinit

We're adding better support for the non-stall interrupt, which will need
to fetch the interrupt vector from the runlist's primary engine.

NVKM doesn't support all target engines (ie. NVDEC etc), and it wouldn't
be ideal to completely fail initialisation in this case.

Instead.  Remove runlists where we can't determine all the needed info.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-7-skeggsb@gmail.com

drm/nouveau/fifo: return ERR_PTR from nvkm_runl_new()

Callers expect this - not NULL.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-6-skeggsb@gmail.com

drm/nouveau/fifo: remove left-over references to nvkm_fifo_chan

This was renamed to nvkm_chan in the host rework.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-5-skeggsb@gmail.com

drm/nouveau/fb/ga102-: construct vidmem heap via new gp102 paths

No need for custom implementation anymore.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-4-skeggsb@gmail.com

drm/nouveau/fb/gp102-ga100: switch to simpler vram size detection method

Also exposes this for use by upcoming GSP-RM initialisation code.

v2: add SPDX header

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-3-skeggsb@gmail.com

drm/nouveau/nvkm: punt spurious irq messages to debug level

This can be completely normal in some situations (ie. non-stall intrs
when nothing is waiting on them).

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-2-skeggsb@gmail.com

drm/nouveau/nvkm: fini object children in reverse order

Turns out, we're currently tearing down the disp core channel *before*
the satellite channels (wndw, etc) during suspend.

This makes RM return NV_ERR_NOT_SUPPORTED on attempting to reallocate
the core channel on resume for some reason, but we probably shouldn't
be doing it on HW either.

Tear down children in the reverse of allocation order instead.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525003106.3853741-1-skeggsb@gmail.com

MAINTAINERS: Remove Laura Abbott from DMA-BUF HEAPS FRAMEWORK

Laura's email address has not been valid for quite awhile now,
so wanted to clean up the reviewer list here.

I reached out to Laura who said it made sense to drop her from
the list, so this patch does that.

I do want to recognize Laura's long time contribution to this
area and her previous ION maintainership, as this couldn't
have gone upstream without her prior efforts. Many thanks!

Cc: Laura Abbott <labbott@kernel.org>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: John Stultz <jstultz@google.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: kernel-team@android.com
Acked-by: Laura Abbott <labbott@kernel.org>
Signed-off-by: John Stultz <jstultz@google.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630162111.3051783-1-jstultz@google.com

MAINTAINERS: add maintainers for DRM LOONGSON driver

This patch add Sui Jingfeng as maintainer to drm/loongson driver.

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-3-15330273260@189.cn

drm: Add kms driver for loongson display controller

Loongson display controller IP has been integrated in both Loongson north
bridge chipset (ls7a1000/ls7a2000) and Loongson SoCs (ls2k1000/ls2k2000).
It has even been included in Loongson's BMC products. It has two display
pipes, and each display pipe supports a primary plane and a cursor plane.

For the DC in the LS7a1000, each display pipe has a DVO output interface,
which is able to support 1920x1080@60Hz. For the DC in the LS7A2000, each
display pipe is equipped with a built-in HDMI encoder, which is compliant
with the HDMI 1.4 specification. The first display pipe is also equipped
with a transparent VGA encoder, which is parallel with the HDMI encoder.
To get a decent performance for writing framebuffer data to the VRAM, the
write combine support should be enabled.

v1 -> v2:
 1) Use hpd status reg when polling for ls7a2000.
 2) Fix all warnings that emerged when compiling with W=1.

v2 -> v3:
 1) Add COMPILE_TEST to Kconfig and make the driver off by default
 2) Alphabetical sorting headers (Thomas)
 3) Untangle register access functions as much as possible (Thomas)
 4) Switch to TTM-based memory manager (Thomas)
 5) Add the chip ID detection function which can be used to distinguish
    chip models
 6) Revise the built-in HDMI phy driver, nearly all main stream mode below
    4K@30Hz is tested, and this driver supports clone(mirror) display mode
    and extend(joint) display mode.

v3 -> v4:
 1) Quickly fix a small mistake.

v4 -> v5:
 1) Add per display pipe debugfs support to the builtin HDMI encoder.

v5 -> v6:
 1) Remove stray code which didn't get used, say lsdc_of_get_reserved_ram
 2) Fix all typos I could found, make sentences and code more readable
 3) Untangle lsdc_hdmi*_connector_detect() function according to the pipe
 4) Rename this driver as loongson.

v6 -> v7:
1) Add prime support for buffer self-sharing, sharing buffer with
   drm/etnaviv is also tested and it works with limitations.
2) Implement buffer object tracking with list_head.
3) Add S3(sleep to RAM) support
4) Rewrite lsdc_bo_move since TTM core stop allocating resources
    during BO creation. Patch V1 ~ V6 of this series no longer work.
    Thus, we send V7.

v7 -> v8:
 1) Zero a compile warning on a 32-bit platform, compile with W=1
 2) Revise lsdc_bo_gpu_offset() and make minor cleanups.
 3) Pageflip tested on the virtual terminal with the following commands:

    modetest -M loongson -s 32:1920x1080 -v
    modetest -M loongson -s 34:1920x1080 -v -F tiles

   It works like a charm, when running the pageflip test with dual screens
   configuration, another two additional BOs were created by the modetest,
   VRAM usage up to 40+ MB, well we have at least 64MB, still enough.

   # cat bos

       bo[0000]: size:     8112kB VRAM
       bo[0001]: size:       16kB VRAM
       bo[0002]: size:       16kB VRAM
       bo[0003]: size:    16208kB VRAM
       bo[0004]: size:     8112kB VRAM
       bo[0005]: size:     8112kB VRAM

v8 -> v9:
 1) Select I2C and I2C_ALGOBIT in Kconfig, should depend on MMU.
 2) Using pci_get_domain_bus_and_slot to get the GPU device.

v9 -> v10:
 1) Revise lsdc_drm_freeze() to implement S3 correctly. We realized that
    the pinned BO could not be moved, the VRAM lost power when sleeping
    to RAM. Thus, the data in the buffer who is pinned in VRAM will get
    lost when resumed. Yet it's not a big problem because this driver
    relies on the CPU to update the front framebuffer. We can see the
    garbage data when resume from S3, but the screen will show the right
    image as I move the cursor. This is due to the CPU repaint. v10 of
    this patch makes S3 perfect by unpin all of the BOs in VRAM, evict
    them all to system RAM in lsdc_drm_freeze().

v10 -> v11:
 1) On a double-screen case, The buffer object backing the single giant
    framebuffer is referenced by two GEM objects; hence, it will be
    pinned at least twice by prepare_fb() function. This causes its pin
    count > 1. V10 of this patch only unpins VRAM BOs once when suspend,
    which is not correct on double-screen case. V11 of this patch unpin
    the BOs until its pin count reaches zero when suspend. Then, we make
    the S3 support complete finally. With v11, I can't see any garbage
    data when resume.

 2) Fix vblank wait timeout when disable CRTC.
 3) Test against IGT, at least fbdev test and kms_flip test passed.
 4) Rewrite pixel PLL update function, magic numbers eliminated (Emil)
 5) Drop a few common hardware features description in lsdc_desc (Emil)
 6) Drop lsdc_mode_config_mode_valid(), instead add restrictions in dumb
    create function. (Emil)
 7) Untangle the ls7a1000 case and ls7a2000 case completely (Thomas)

v11 -> v12:
 none

v12 -> v13:
 1) Add benchmarks to figure out the bandwidth of the hardware platform.
    Usage:
    # cd /sys/kernel/debug/dri/0/
    # cat benchmark

 2) VRAM is filled with garbage data if uninitialized, add a buffer
    clearing procedure (lsdc_bo_clear), clear the BO on creation time.
 3) Update copyrights and adjust coding style (Huacai)

v13 -> v14:
 1) Trying to add async update support for cursor plane.

v14 -> v15:
 1) Add lsdc_vga_set_decode() funciton, which allow us remove multi-video
    cards workaround, now it allow drm/loongson, drm/amdgpu, drm/etnaviv
    co-exist in the system, more is also possible (Emil and Xuerui)
 2) Fix typos and grammar mistakes as much as possible (Xuerui)
 3) Unify copyrights as GPL-2.0+ (Xuerui)
 4) Fix a bug introduce since V13, TTM may import BO from other drivers,
    we shouldn't clear it on such a case.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: loongson-kernel@lists.loongnix.cn
Tested-by: Liu Peibao <liupeibao@loongson.cn>
Tested-by: Li Yi  <liyi@loongson.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615143613.1236245-2-15330273260@189.cn

drm/drm_gem.c: Remove surplus else after return

else is not generally useful after return

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230622101857.2298773-1-suijingfeng@loongson.cn

drm/gud: use vmalloc_array and vcalloc

Use vmalloc_array and vcalloc to protect against
multiplication overflows.

The changes were done using the following Coccinelle
semantic patch:

// <smpl>
@initialize:ocaml@
@@

let rename alloc =
  match alloc with
    "vmalloc" -> "vmalloc_array"
  | "vzalloc" -> "vcalloc"
  | _ -> failwith "unknown"

@@
    size_t e1,e2;
    constant C1, C2;
    expression E1, E2, COUNT, x1, x2, x3;
    typedef u8;
    typedef __u8;
    type t = {u8,__u8,char,unsigned char};
    identifier alloc = {vmalloc,vzalloc};
    fresh identifier realloc = script:ocaml(alloc) { rename alloc };
@@

(
      alloc(x1*x2*x3)
|
      alloc(C1 * C2)
|
      alloc((sizeof(t)) * (COUNT), ...)
|
-     alloc((e1) * (e2))
+     realloc(e1, e2)
|
-     alloc((e1) * (COUNT))
+     realloc(COUNT, e1)
|
-     alloc((E1) * (E2))
+     realloc(E1, E2)
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230627144339.144478-4-Julia.Lawall@inria.fr

drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer

Wait until the command transfer FIFO is empty before loading in the next
command. The previous behavior where the code waited until command transfer
FIFO was not full suffered from transfer corruption, where the last command
in the FIFO could be overwritten in case the FIFO indicates not full, but
also does not have enough space to store another transfer yet.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201511.565923-1-marex@denx.de

MAINTAINERS: Add T.J. Mercier as reviewer for DMA-BUF HEAPS FRAMEWORK

T.J. has been responsible for dmab-buf items on the Android team
for awhile now, so it would be great to have him on as a reviewer.

Cc: T.J. Mercier <tjmercier@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: John Stultz <jstultz@google.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: kernel-team@android.com
Signed-off-by: John Stultz <jstultz@google.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630045246.1674919-1-jstultz@google.com

MAINTAINERS: Remove Liam Mark from DMA-BUF HEAPS FRAMEWORK

@codeaurora.org email addresses are no longer valid and will bounce.

I reached out to Liam about updating his entry under DMA-BUF HEAPS
FRAMEWORK with an @codeaurora.org address.  His response:

"I am not a maintainer anymore, that should be removed."

Liam currently does not have an email address that can be used to remove
this entry, so I offered to submit a cleanup on his behalf with Liam's
consent.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230628180534.31819-1-quic_jhugo@quicinc.com

drm/edid: Add quirk for OSVR HDK 2.0

The OSVR virtual reality headset HDK 2.0 uses a different EDID
vendor and device identifier than the HDK 1.1 - 1.4 headsets.
Add the HDK 2.0 vendor and device identifier to the quirks table so
that window managers do not try to display the desktop screen on the
headset display.

Closes: https://gitlab.freedesktop.org/drm/misc/-/issues/30
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Tested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621061903.3422648-1-rcampbell@nvidia.com

drm/tests: Fix swapped drm_framebuffer tests parameter names

Swap tests parameters names so they actually reflect what is being tested.

Signed-off-by: Carlos Eduardo Gallo Filho <gcarlos@disroot.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230624212905.21338-1-gcarlos@disroot.org

drm/edid: make read-only const array static

Don't populate the const array on the stack, instead make it static.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230627170109.751829-1-colin.i.king@gmail.com

drm/ast: Merge config and chip detection

Detection of the configuration mode and the chipset model are
linked to each other. One uses values from the other; namely the
PCI device revision and the SCU revision. Merge this code into
a single function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-15-tzimmermann@suse.de

drm/ast: Move widescreen and tx-chip detection into separate helpers

Split ast_detect_chip() into three functions and call them one by
one. The new functions detect the transmitter chip and widescreen
support. This will allow for further refactoring.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> # AST2400
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-14-tzimmermann@suse.de

drm/ast: Detect AST 2510 model

Detect the 6th-generation AST 2510. Allows to simplify the code
for widescreen support.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-13-tzimmermann@suse.de

drm/ast: Detect AST 1400 model

Detect the 5th-generation AST 1400. Allows to simplify the code
for widescreen support.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-12-tzimmermann@suse.de

drm/ast: Detect AST 1300 model

Detect the 4th-generation AST 1300. Allows to simplify the code
for widescreen support.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-11-tzimmermann@suse.de

drm/ast: Distinguish among chip generations

ASpeed distinguishes among various generations of the AST graphics
chipset with various models. [1] The most-recent model AST 2600 is
of the 7th generation, the AST 2500 is of the 6th generation, and so
on.

The ast driver simply picks one of the models as representative for
the whole generation. In several places, individual models of the
same generation need to be handled differently, which then requires
additional code for detecting the model.

Introduce different generations of the Aspeed chipset. In the source
code, refer to the generation instead of the representation model where
possible. The few places that require per-model handling are now clearly
marked.

In the enum ast_chip, we arrange each model's value such that it
encodes the generation. This allows for an easy test. The actual values
are ordered, but not of interest to the driver.

v2:
* use __ast_gen_is_eq() (Jingfeng)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://web.archive.org/web/20141007093258/http://www.aspeedtech.com/products.php?fPath=20
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-10-tzimmermann@suse.de

drm/ast: Set up release action right after enabling MMIO

Ast sets up a managed release of the MMIO access flags. Move this
code next to the MMIO access code, so that it runs if other errors
occur during the device initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> # AST2400
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-9-tzimmermann@suse.de

drm/ast: Enable and unlock device access early during init

POST and memory management contains code to enable access to the
device's memory spaces. This is too late. Consolidate this code at
the beginning of the device initialization.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-8-tzimmermann@suse.de

drm/ast: Set PCI config before accessing I/O registers

Access to I/O registers is required to detect and set up the
device. Enable the rsp PCI config bits before. While at it,
convert the magic number to macro constants.

Enabling the PCI config bits was done after trying to detect
the device. It was probably too late at this point.

v2:
* use standard 16-bit PCI r/w access (Jingfeng)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-7-tzimmermann@suse.de

drm/ast: Remove device POSTing and config from chip detection

There's way too much going on in ast_detect_chip(). Move the POST
and config code from the top of the function into the caller. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-6-tzimmermann@suse.de

drm/ast: Remove dead else branch in POST code

According to the chip detection in ast_detect_chip(), AST2300 and
later always have a PCI revision of 0x20 or higher. Therefore the
code in ast_set_def_ext_reg() can not use the else branch when
selecing the EXT register values. Remove the dead branch and the
related values.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-5-tzimmermann@suse.de

drm/ast: Implement register helpers in ast_drv.h

There are already a number of register I/O functions in ast_drv.h.
For consistency, move the remaining functions there as well. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-4-tzimmermann@suse.de

drm/ast: Remove vga2_clone field

Remove the unused field vga2_clone from struct ast_device. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-3-tzimmermann@suse.de

drm/ast: Fix DRAM init on AST2200

Fix the test for the AST2200 in the DRAM initialization. The value
in ast->chip has to be compared against an enum constant instead of
a numerical value.

This bug got introduced when the driver was first imported into the
kernel.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 312fec1405dd ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-2-tzimmermann@suse.de

drm/ttm: Don't shadow the operation context

ttm_bo_swapout() shadows the ttm operation context which may cause
major confusion in driver callbacks when swapping out !TTM_PL_SYSTEM
memory. Fix this by reusing the operation context argument to
ttm_bo_swapout().

Cc: "Christian König" <christian.koenig@amd.com>
Cc: Roger He <Hongbo.He@amd.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: <intel-gfx@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626091450.14757-3-thomas.hellstrom@linux.intel.com