review.tizen.org Git - platform/kernel/linux-rpi.git/log

ASoC: wcd9335: Use correct version to initialize Class H

[ Upstream commit a270bd9abdc3cd04ec194f1f3164823cbb5a905c ]

The versioning scheme was changed in an earlier patch, which caused the version
being used to initialize WCD9335 to be interpreted as if it was WCD937X, which
changed code paths causing broken headphones output. Pass WCD9335 instead of
WCD9335_VERSION_2_0 to wcd_clsh_ctrl_alloc to fix it.

Fixes: 19c5d1f6a0c3 ("ASoC: codecs: wcd-clsh: add new version support")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210925022339.786296-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzg2l: Fix missing port register 21h

[ Upstream commit fcfb63148c241adad54ed99fc318167176d7254b ]

Remove the duplicate port register 22h and replace it with missing port
register 21h.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922074140.22178-1-biju.das.jz@bp.renesas.com
Fixes: c4c4637eb57f2a25 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

JFS: fix memleak in jfs_mount

[ Upstream commit c48a14dca2cb57527dde6b960adbe69953935f10 ]

In jfs_mount, when diMount(ipaimap2) fails, it goes to errout35. However,
the following code does not free ipaimap2 allocated by diReadSpecial.

Fix this by refactoring the error handling code of jfs_mount. To be
specific, modify the lable name and free ipaimap2 when the above error
ocurrs.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT

[ Upstream commit 7f3b3c2bfa9c93ab9b5595543496f570983dc330 ]

mach/loongson64 fails to build when the FPU support is disabled:

arch/mips/loongson64/cop2-ex.c:45:15: error: implicit declaration of function ‘__is_fpu_owner’; did you mean ‘is_fpu_owner’? [-Werror=implicit-function-declaration]
arch/mips/loongson64/cop2-ex.c:98:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:99:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:131:43: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:137:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:203:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:219:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:283:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:301:38: error: ‘struct thread_struct’ has no member named ‘fpu’

Fixes: ef2f826c8f2f ("MIPS: Loongson-3: Enable the COP2 usage")
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reported-by: k2ci robot <kernel-bot@kylinos.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: dc395: Fix error case unwinding

[ Upstream commit cbd9a3347c757383f3d2b50cf7cfd03eb479c481 ]

dc395x_init_one()->adapter_init() might fail. In this case, the acb is
already cleaned up by adapter_init(), no need to do that in
adapter_uninit(acb) again.

[    1.252251] dc395x: adapter init failed
[    1.254900] RIP: 0010:adapter_uninit+0x94/0x170 [dc395x]
[    1.260307] Call Trace:
[    1.260442]  dc395x_init_one.cold+0x72a/0x9bb [dc395x]

Link: https://lore.kernel.org/r/20210907040702.1846409-1-ztong0001@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: fix display port phy reg property

[ Upstream commit 425f30cc843c727bc7753a0d33710d1e4a999168 ]

Existing display port phy reg property is derived from usb phy which
map display port phy pcs to wrong address which cause aux init
with wrong address and prevent both dpcd read and write from working.
Fix this problem by assigning correct pcs address to display port
phy reg property.

Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631216998-10049-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: llcc: Disable MMUHWT retention

[ Upstream commit 3a461009e195c3c17f6af73da310b886991309fd ]

Disable MMUHWT retention for SC7280 as done for other platforms
to avoid more power burn.

Fixes: f6a07be63301 ("soc: qcom: llcc: Add configuration data for SC7280")
Signed-off-by: Naina Mehta <nainmeht@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921055942.30600-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7180: Base dynamic CPU power coefficients in reality

[ Upstream commit 82ea7d411d43f60dce878252558e926f957109f0 ]

The sc7180's dynamic-power-coefficient violates the device tree bindings.
The bindings (arm/cpus.yaml) say that the units for the
dynamic-power-coefficient are supposed to be "uW/MHz/V^2". The ones for
sc7180 aren't this. Qualcomm arbitrarily picked 100 for the "little" CPUs
and then picked a number for the big CPU based on this.

At the time, there was a giant dicussion about this. Apparently Qualcomm
Engineers were instructed not to share the actual numbers here. As part
of the discussion, I pointed out [1] that these numbers shouldn't really
be secret since once a device is shipping anyone can just run a script
and produce them. This patch is the result of running the script I posted
in that discussion on sc7180-trogdor-coachz, which is currently available
for purchase by consumers.

[1] https://lore.kernel.org/r/CAD=FV=U1FP0e3_AVHpauUUZtD-5X3XCwh5aT9fH_8S_FFML2Uw@mail.gmail.com/

I ran the script four times, measuring little, big, little, big. I used
the 64-bit version of dhrystone 2.2 in my test. I got these results:

576 kHz, 596 mV, 20 mW, 88 Cx
768 kHz, 596 mV, 32 mW, 122 Cx
1017 kHz, 660 mV, 45 mW, 97 Cx
1248 kHz, 720 mV, 87 mW, 139 Cx
1324 kHz, 756 mV, 109 mW, 148 Cx
1516 kHz, 828 mV, 150 mW, 148 Cx
1612 kHz, 884 mV, 182 mW, 147 Cx
1708 kHz, 884 mV, 192 mW, 146 Cx
1804 kHz, 884 mV, 207 mW, 149 Cx
Your dynamic-power-coefficient for cpu 0: 132

825 kHz, 596 mV, 142 mW, 401 Cx
979 kHz, 628 mV, 183 mW, 427 Cx
1113 kHz, 656 mV, 224 mW, 433 Cx
1267 kHz, 688 mV, 282 mW, 449 Cx
1555 kHz, 812 mV, 475 mW, 450 Cx
1708 kHz, 828 mV, 566 mW, 478 Cx
1843 kHz, 884 mV, 692 mW, 476 Cx
1900 kHz, 884 mV, 722 mW, 482 Cx
1996 kHz, 916 mV, 814 mW, 482 Cx
2112 kHz, 916 mV, 862 mW, 483 Cx
2208 kHz, 916 mV, 962 mW, 521 Cx
2323 kHz, 940 mV, 1060 mW, 517 Cx
2400 kHz, 956 mV, 1133 mW, 518 Cx
Your dynamic-power-coefficient for cpu 6: 471

576 kHz, 596 mV, 26 mW, 103 Cx
768 kHz, 596 mV, 40 mW, 147 Cx
1017 kHz, 660 mV, 54 mW, 114 Cx
1248 kHz, 720 mV, 97 mW, 151 Cx
1324 kHz, 756 mV, 113 mW, 150 Cx
1516 kHz, 828 mV, 154 mW, 148 Cx
1612 kHz, 884 mV, 194 mW, 155 Cx
1708 kHz, 884 mV, 203 mW, 152 Cx
1804 kHz, 884 mV, 219 mW, 155 Cx
Your dynamic-power-coefficient for cpu 0: 142

825 kHz, 596 mV, 148 mW, 530 Cx
979 kHz, 628 mV, 189 mW, 475 Cx
1113 kHz, 656 mV, 230 mW, 461 Cx
1267 kHz, 688 mV, 287 mW, 466 Cx
1555 kHz, 812 mV, 469 mW, 445 Cx
1708 kHz, 828 mV, 567 mW, 480 Cx
1843 kHz, 884 mV, 699 mW, 482 Cx
1900 kHz, 884 mV, 719 mW, 480 Cx
1996 kHz, 916 mV, 814 mW, 484 Cx
2112 kHz, 916 mV, 861 mW, 483 Cx
2208 kHz, 916 mV, 963 mW, 522 Cx
2323 kHz, 940 mV, 1063 mW, 520 Cx
2400 kHz, 956 mV, 1135 mW, 519 Cx
Your dynamic-power-coefficient for cpu 6: 489

As you can see, the calculations aren't perfectly consistent but
roughly you could say about 480 for big and 137 for little.

The ratio between these numbers isn't quite the same as the ratio
between the two numbers that Qualcomm used. Perhaps this is because
Qualcomm measured something slightly different than the 64-bit version
of dhrystone 2.2 or perhaps it's because they fudged these numbers a
bit (and fudged the capacity-dmips-mhz). As per discussion [2], let's
use the numbers I came up with and also un-fudge
capacity-dmips-mhz. While unfudging capacity-dmips-mhz, let's scale it
so that bigs are 1024 which seems to be the common practice.

In general these numbers don't need to be perfectly exact. In fact,
they can't be since the CPU power depends a lot on what's being run on
the CPU and the big/little CPUs are each more or less efficient in
different operations. Historically running the 32-bit vs. 64-bit
versions of dhrystone produced notably different numbers, though I
didn't test this time.

We also need to scale all of the sustainable-power numbers by the same
amount. I scale ones related to the big CPUs by the adjustment I made
to the big dynamic-power-coefficient and the ones related to the
little CPUs by the adjustment I made to the little
dynamic-power-coefficient.

[2] https://lore.kernel.org/r/0a865b6e-be34-6371-f9f2-9913ee1c5608@codeaurora.org/

Fixes: 71f873169a80 ("arm64: dts: qcom: sc7180: Add dynamic CPU power coefficients")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210902145127.v2.1.I049b30065f3c715234b6303f55d72c059c8625eb@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: tse850: the emac<->phy interface is rmii

[ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ]

This went unnoticed until commit 7897b071ac3b ("net: macb: convert
to phylink") which tickled the problem. The sama5d3 emac has never
been capable of rgmii, and it all just happened to work before that
commit.

Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix timekeeping_suspended warning on resume

[ Upstream commit b3e9431854e8f305385d5de225441c0477b936cb ]

On resume we can get a warning at kernel/time/timekeeping.c:824 for
timekeeping_suspended.

Let's fix this by adding separate functions for sysc_poll_reset_sysstatus()
and sysc_poll_reset_sysconfig() and have the new functions handle also
timekeeping_suspended.

If iopoll at some point supports timekeeping_suspended, we can just drop
the custom handling from these functions.

Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1: Fix the pwm regulator supply properties

[ Upstream commit 0b26fa8a02c2834f1fa8a206a285b9f84c4ad764 ]

After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VDDCPU pwm regulator to 12V regulator supply
instead of dummy regulator.

[   11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property
               in node /regulator-vddcpu failed
[   11.602344] VDDCPU: supplied by regulator-dummy
[   11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT
[   11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled

Fixes: 88d537bc92ca ("arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi")
Fixes: 700ab8d83927 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L")
Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-4-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-g12b: Fix the pwm regulator supply properties

[ Upstream commit 62183863f708c2464769e0d477c8ce9f3d326feb ]

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VDDCP_A and VDDCPU_B pwm regulator to 12V regulator
supply instead of dummy regulator.

[    4.147196] VDDCPU_A: will resolve supply early: pwm
[    4.147216] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply from device tree
[    4.147227] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply property in node /regulator-vddcpu-a failed
[    4.147258] VDDCPU_A: supplied by regulator-dummy
[    4.147288] regulator-dummy: could not add device link regulator.12: -ENOENT
[    4.147353] VDDCPU_A: 721 <--> 1022 mV at 871 mV, enabled
[    4.152014] VDDCPU_B: will resolve supply early: pwm
[    4.152035] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply from device tree
[    4.152047] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply property in node /regulator-vddcpu-b failed
[    4.152079] VDDCPU_B: supplied by regulator-dummy
[    4.152108] regulator-dummy: could not add device link regulator.13: -ENOENT

Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
Fixes: d14734a04a8a ("arm64: dts: meson-g12b-odroid-n2: enable DVFS")
Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-3-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-g12a: Fix the pwm regulator supply properties

[ Upstream commit 085675117ecf5e02c4220698fd549024ec64ad2c ]

After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VDDCPU pwm regulator to 12V regulator supply
instead of dummy regulator.

[   11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property
               in node /regulator-vddcpu failed
[   11.602344] VDDCPU: supplied by regulator-dummy
[   11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT
[   11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled

Fixes: e9bc0765cc12 ("arm64: dts: meson-g12a: enable DVFS on G12A boards")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-2-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: j7200-main: Fix "bus-range" upto 256 bus number for PCIe

[ Upstream commit 8bb8429290c0043a78804ae48294b53f781ee426 ]

commit 3276d9f53cf6 ("arm64: dts: ti: k3-j7200-main: Add PCIe device
tree node") incorrectly added PCIe bus numbers from 0 to 15 (copy-paste
from J721E node). Enable all the supported bus numbers from 0 to 255
defined in PCIe spec here.

Fixes: 3276d9f53cf6 ("arm64: dts: ti: k3-j7200-main: Add PCIe device tree node")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915055358.19997-5-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: j7200-main: Fix "vendor-id"/"device-id" properties of pcie node

[ Upstream commit 0d553792726a61ced760422e74ea67552ac69cdb ]

commit 3276d9f53cf6 ("arm64: dts: ti: k3-j7200-main: Add PCIe device
tree node") incorrectly added "vendor-id" and "device-id" as 16-bit
properties though both of them are 32-bit properties. Fix it here.

Fixes: 3276d9f53cf6 ("arm64: dts: ti: k3-j7200-main: Add PCIe device tree node")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915055358.19997-4-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721e-main: Fix "bus-range" upto 256 bus number for PCIe

[ Upstream commit 5f46633565b1c1e1840a927676065d72b442dac4 ]

commit 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device
tree nodes") restricted PCIe bus numbers from 0 to 15 (due to SMMU
restriction in J721E). However since SMMU is not enabled, allow the full
supported bus numbers from 0 to 255.

Fixes: 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915055358.19997-3-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721e-main: Fix "max-virtual-functions" in PCIe EP nodes

[ Upstream commit 9af3ef954975c383eeb667aee207d9ce6fbef8c4 ]

commit 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device
tree nodes") added "max-virtual-functions" to have 16 bit values.
Fix "max-virtual-functions" in PCIe endpoint (EP) nodes to have 8 bit
values instead of 16.

Fixes: 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915055358.19997-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Fix query SRQ failure

[ Upstream commit 598d16fa1bf93431ad35bbab3ed1affe4fb7b562 ]

Fill the missing parameters for the FW command while querying SRQ.

Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/1631709163-2287-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY

[ Upstream commit 8ccecf6c710b8c048eecc65709640642e5357d6e ]

According to YAML validation, and for a future patchset putting this
xo_board reference clock to use as VCO reference parent, add the missing
clock to dsi_phy0.

Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Fix GPU register width for RK3328

[ Upstream commit 932b4610f55b49f3a158b0db451137bab7ed0e1f ]

As can be seen in RK3328's TRM the register range for the GPU is
0xff300000 to 0xff330000.
It would (and does in vendor kernel) overlap with the registers of
the HEVC encoder (node/driver do not exist yet in upstream kernel).
See already existing h265e_mmu node.

Fixes: 752fbc0c8da7 ("arm64: dts: rockchip: add rk3328 mali gpu node")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210623115926.164861-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()

[ Upstream commit 2aa717473ce96c93ae43a5dc8c23cedc8ce7dd9f ]

The s3c24xx_init_intc() returns an error pointer upon failure, not NULL.
let's add an error pointer check in s3c24xx_handle_irq.

s3c_intc[0] is not NULL or ERR, we can simplify the code.

Fixes: 1f629b7a3ced ("ARM: S3C24XX: transform irq handling into a declarative form")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://lore.kernel.org/r/20210901123557.1043953-1-liu.yun@linux.dev
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix NVMe I/O failover to non-optimized path

[ Upstream commit b507357f79171fb4fb4e732ca43a1f30bc5aab1d ]

Currently, we hold off unregistering with NVMe transport layer until GID_FT
or ADISC completes upon receipt of RSCN. In the ADISC discovery routine,
for nodes not found in the GID_FT response, the nodes are unregistered from
the SCSI transport but not UNREG_RPI'd. Meaning outstanding WQEs continue
to be outstanding and were not failed back to the OS. If an NVMe device,
this mean there wasn't initial termination of the I/Os so they could be
issued on a different NVMe path.

Fix by unregistering the RPI so that I/O is cancelled.

Link: https://lore.kernel.org/r/20210910233159.115896-8-jsmart2021@gmail.com
Fixes: 0614568361b0 ("scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Use link event to wake up app

[ Upstream commit 527d46e0b0147f2b32b78ba49c6a231835b24a41 ]

Authentication application may be running and in the past tried to probe
driver (app_start) but was unsuccessful. This could be due to the bsg layer
not being ready to service the request. On a successful link up, driver
will use the netlink Link Up event to notify the app to retry the app_start
call.

In another case, app does not poll for new NPIV host. This link up event
would notify app of the presence of a new SCSI host.

Link: https://lore.kernel.org/r/20210908164622.19240-6-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix lockup in outbound queue management

[ Upstream commit b27a40534ef76a22628a5c12f98ea489823a8ba5 ]

Commit 1f02beff224e ("scsi: pm80xx: Remove global lock from outbound queue
processing") introduced a lock per outbound queue. Prior to that change the
driver was using a global lock for all outbound queues.

While processing the I/O responses and events the driver takes the outbound
queue spinlock and is supposed to release it in pm8001_ccb_task_free_done()
before calling command done(). Since the older code was using a global
lock, pm8001_ccb_task_free_done() was releasing the global spin lock. The
change that split the lock per outbound queue did not consider this and
pm8001_ccb_task_free_done() was still releasing the global lock.

Link: https://lore.kernel.org/r/20210906170404.5682-3-Ajish.Koshy@microchip.com
Fixes: 1f02beff224e ("scsi: pm80xx: Remove global lock from outbound queue processing")
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling paths

[ Upstream commit af9617b419f77cf0b99702a7b2b0519da0d27715 ]

If we exit the for_each_of_cpu_node loop early, the reference on the
current node must be decremented, otherwise there is a leak.

Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/545df946044fc1fc05a4217cdf0054be7a79e49e.1619161112.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcm4908: Fix UART clock name

[ Upstream commit 6c38c39ab2141f53786d73e706675e8819a3f2cb ]

According to the binding the correct clock name is "refclk".

Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Fix memory nodes names

[ Upstream commit c5e1df3276d7a500678da9453be31a66ad115150 ]

Thix fixes:
arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']}
arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix wrong port_cap_flags

[ Upstream commit dcd3f985b20ffcc375f82ca0ca9f241c7025eb5e ]

The port->attr.port_cap_flags should be set to enum
ib_port_capability_mask_bits in ib_mad.h, not
RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210831083223.65797-1-weijunji@bytedance.com
Signed-off-by: Junji Wei <weijunji@bytedance.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: st_sensors: disable regulators after device unregistration

[ Upstream commit 9f0b3e0cc0c88618aa9e5cecef747b1337ae0a5d ]

Up until commit ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal
to core") only the ST pressure driver seems to have had any regulator
disable. After that commit, the regulator handling was moved into the
common st_sensors logic.

In all instances of this regulator handling, the regulators were disabled
before unregistering the IIO device.
This can cause issues where the device would be powered down and still be
available to userspace, allowing it to send invalid/garbage data.

This change moves the st_sensors_power_disable() after the common probe
functions. These common probe functions also handle unregistering the IIO
device.

Fixes: 774487611c949 ("iio: pressure-core: st: Provide support for the Vdd power supply")
Fixes: ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal to core")
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210823112204.243255-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: sm1: add Ethernet PHY reset line for ODROID-C4/HC4

[ Upstream commit 9d02214f8332d5dbbcce3d6c5c915e54d43a0c46 ]

This patch is to fix an issue that the ethernet link doesn't come up
when using ip link set down/up:
   [   11.428114] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
   [   14.428595] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
   [   14.428610] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
   [   14.428974] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
   [   14.711185] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed

This fix refers to two commits applied for ODROID-N2 (G12B).
    commit 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
    commit 1c7412530d5d0 ("arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements")

Fixes: 88d537bc92ca ("arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi")
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: added fixes tag and typo in commit log]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YScKYFWlYymgGw3l@anyang-linuxfactory-or-kr
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: r8188eu: fix memory leak in rtw_set_key

[ Upstream commit 393db0f6827f96054a769ba3a38aa382d137d3c7 ]

Before returning with an error we should free allocated buffers, since
they are not assigned to anywhere.

Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/ee783fbb71abb549505b84542223be7a7c905eea.1630692375.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: Fix parameter in parse_perf_domain()

[ Upstream commit 4a08e3271c55f8b5d56906a8aa5bd041911cf897 ]

Pass cpu to parse_perf_domain() instead of pcpu.

Fixes: 8486a32dd484 ("cpufreq: Add of_perf_domain_get_sharing_cpumask")
Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com>
[ Viresh: Massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: fix EXPECT text for gpio hog errors

[ Upstream commit e85860e5bc077865a04f0a88d0b0335d3200484a ]

The console message text for gpio hog errors does not match
what unittest expects.

Fixes: f4056e705b2ef ("of: unittest: add overlay gpio test to catch gpio hog problem")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211029013225.2048695-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.

[ Upstream commit 388e2c0b978339dee9b0a81a2e546f8979e021e2 ]

Similar to unsigned bounds propagation fix signed bounds.
The 'Fixes' tag is a hint. There is no security bug here.
The verifier was too conservative.

Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-2-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.

[ Upstream commit b9979db8340154526d9ab38a1883d6f6ba9b6d47 ]

Before this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0xffffffff))

After this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0x1))

While processing BPF_JLE the reg_set_min_max() would set true_reg->umax_value = 1
and call __reg_combine_64_into_32(true_reg).

Without the fix it would not pass the condition:
if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value))

since umin_value == 0 at this point.
Before commit 10bf4e83167c the umin was incorrectly ingored.
The commit 10bf4e83167c fixed the correctness issue, but pessimized
propagation of 64-bit min max into 32-bit min max and corresponding var_off.

Fixes: 10bf4e83167c ("bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: Fix rootcg cpu.stat guest double counting

[ Upstream commit 81c49d39aea8a10e6d05d3aa1cb65ceb721e19b0 ]

In account_guest_time in kernel/sched/cputime.c guest time is
attributed to both CPUTIME_NICE and CPUTIME_USER in addition to
CPUTIME_GUEST_NICE and CPUTIME_GUEST respectively. Therefore, adding
both to calculate usage results in double counting any guest time at
the rootcg.

Fixes: 936f2a70f207 ("cgroup: add cpu.stat file to root cgroup")
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

skmsg: Lose offset info in sk_psock_skb_ingress

[ Upstream commit 7303524e04af49a47991e19f895c3b8cdc3796c7 ]

If sockmap enable strparser, there are lose offset info in
sk_psock_skb_ingress(). If the length determined by parse_msg function is not
skb->len, the skb will be converted to sk_msg multiple times, and userspace
app will get the data multiple times.

Fix this by get the offset and length from strp_msg. And as Cong suggested,
add one bit in skb->_sk_redir to distinguish enable or disable strparser.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211029141216.211899-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: mptcp: fix proto type in link_failure tests

[ Upstream commit 7c909a98042ce403c8497c5d6ff94dd53bdd2131 ]

In listener_ns, we should pass srv_proto argument to mptcp_connect command,
not cl_proto.

Fixes: 7d1e6f1639044 ("selftests: mptcp: add testcase for active-back")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: delay complete()

[ Upstream commit 6b278c0cb378079f3c0c61ae4a369c09ff1a4188 ]

If we get CRQ_INIT, we set errno to -EIO and first call complete() to
notify the waiter. Then we try to schedule a FAILOVER reset. If this
occurs while adapter is in PROBING state, ibmvnic_reset() changes the
error code to EAGAIN and returns without scheduling the FAILOVER. The
purpose of setting error code to EAGAIN is to ask the waiter to retry.

But due to the earlier complete() call, the waiter may already have seen
the -EIO response and decided not to retry. This can cause intermittent
failures when bringing up ibmvnic adapters during boot, specially in
in kexec/kdump kernels.

Defer the complete() call until after scheduling the reset.

Also streamline the error code to EAGAIN. Don't see why we need EIO
sometimes. All 3 callers of ibmvnic_reset_init() can handle EAGAIN.

Fixes: 17c8705838a5 ("ibmvnic: Return error code if init interrupted by transport event")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: Process crqs after enabling interrupts

[ Upstream commit 6e20d00158f31f7631d68b86996b7e951c4451c8 ]

Soon after registering a CRQ it is possible that we get a fail over or
maybe a CRQ_INIT from the VIOS while interrupts were disabled.

Look for any such CRQs after enabling interrupts.

Otherwise we can intermittently fail to bring up ibmvnic adapters during
boot, specially in kexec/kdump kernels.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: don't stop queue in xmit

[ Upstream commit 8878e46fcfd46b19964bd90e13b25dd94cbfc9be ]

If adapter's resetting bit is on, discard the packet but don't stop the
transmit queue - instead leave that to the reset code. With this change,
it is possible that we may get several calls to ibmvnic_xmit() that simply
discard packets and return.

But if we stop the queue here, we might end up doing so just after
__ibmvnic_open() started the queues (during a hard/soft reset) and before
the ->resetting bit was cleared. If that happens, there will be no one to
restart queue and transmissions will be blocked indefinitely.

This can cause a TIMEOUT reset and with auto priority failover enabled,
an unnecessary FAILOVER reset to less favored backing device and then a
FAILOVER back to the most favored backing device. If we hit the window
repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER
resets leaving the adapter unusable for extended periods of time.

Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit")
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp6: allow SO_MARK ctrl msg to affect routing

[ Upstream commit 42dcfd850e514b229d616a53dec06d0f2533217c ]

Commit c6af0c227a22 ("ip: support SO_MARK cmsg")
added propagation of SO_MARK from cmsg to skb->mark.
For IPv4 and raw sockets the mark also affects route
lookup, but in case of IPv6 the flow info is
initialized before cmsg is parsed.

Fixes: c6af0c227a22 ("ip: support SO_MARK cmsg")
Reported-and-tested-by: Xintong Hu <huxintong@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix fclose/pclose mismatch in test_progs

[ Upstream commit f48ad69097fe79d1de13c4d8fef556d4c11c5e68 ]

Make sure to use pclose() to properly close the pipe opened by popen().

Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211026143409.42666-1-andrea.righi@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: pcrypt - Delay write to padata->info

[ Upstream commit 68b6dea802cea0dbdd8bd7ccc60716b5a32a5d8a ]

These three events can race when pcrypt is used multiple times in a
template ("pcrypt(pcrypt(...))"):

  1.  [taskA] The caller makes the crypto request via crypto_aead_encrypt()
  2.  [kworkerB] padata serializes the inner pcrypt request
  3.  [kworkerC] padata serializes the outer pcrypt request

3 might finish before the call to crypto_aead_encrypt() returns in 1,
resulting in two possible issues.

First, a use-after-free of the crypto request's memory when, for
example, taskA writes to the outer pcrypt request's padata->info in
pcrypt_aead_enc() after kworkerC completes the request.

Second, the outer pcrypt request overwrites the inner pcrypt request's
return code with -EINPROGRESS, making a successful request appear to
fail.  For instance, kworkerB writes the outer pcrypt request's
padata->info in pcrypt_aead_done() and then taskA overwrites it
in pcrypt_aead_enc().

Avoid both situations by delaying the write of padata->info until after
the inner crypto request's return code is checked.  This prevents the
use-after-free by not touching the crypto request's memory after the
next-inner crypto request is made, and stops padata->info from being
overwritten.

Fixes: 5068c7a883d16 ("crypto: pcrypt - Add pcrypt crypto parallelization wrapper")
Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: bridge: update IGMP/MLD membership interval value

[ Upstream commit 34d7ecb3d4f772eb00ce1f7195ae30886ddf4d2e ]

When I fixed IGMPv3/MLDv2 to use the bridge's multicast_membership_interval
value which is chosen by user-space instead of calculating it based on
multicast_query_interval and multicast_query_response_interval I forgot
to update the selftests relying on that behaviour. Now we have to
manually set the expected GMI value to perform the tests correctly and get
proper results (similar to IGMPv2 behaviour).

Fixes: fac3cb82a54a ("net: bridge: mcast: use multicast_membership_interval for IGMPv3")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: fix uninitialized variables when BRIDGE_CFM is disabled

[ Upstream commit 829e050eea69c7442441b714b6f5b339b5b8c367 ]

Function br_get_link_af_size_filtered() calls br_cfm_{,peer}_mep_count()
that return a count. When BRIDGE_CFM is not enabled these functions
simply return -EOPNOTSUPP but do not modify count parameter and
calling function then works with uninitialized variables.
Modify these inline functions to return zero in count parameter.

Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.")
Cc: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylink: avoid mvneta warning when setting pause parameters

[ Upstream commit fd8d9731bcdfb22d28e45bce789bcb211c868c78 ]

mvneta does not support asymetric pause modes, and it flags this by the
lack of AsymPause in the supported field. When setting pause modes, we
check that pause->rx_pause == pause->tx_pause, but only when pause
autoneg is enabled. When pause autoneg is disabled, we still allow
pause->rx_pause != pause->tx_pause, which is incorrect when the MAC
does not support asymetric pause, and causes mvneta to issue a warning.

Fix this by removing the test for pause->autoneg, so we always check
that pause->rx_pause == pause->tx_pause for network devices that do not
support AsymPause.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: fix potential deadlock when canceling dim work

[ Upstream commit 17e712c6a1bade9dac02a7bf2b464746faa7e9a0 ]

When port is linked down, the process which has acquired rtnl_lock
will wait for the in-progress dim work to finish, and the work also
acquires rtnl_lock, which may cause deadlock.

Currently IRQ_MOD registers can be configured by `ethtool -C` and
dim work, and which will take effect depends on the execution order,
rtnl_lock is useless here, so remove them.

Fixes: 9d32e4e7e9e1 ("nfp: add support for coalesce adaptive feature")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: fix NULL pointer access when scheduling dim work

[ Upstream commit f8d384a640dd32aaf0a05fec137ccbf0e986b09f ]

Each rx/tx ring has a related dim work, when rx/tx ring number is
decreased by `ethtool -L`, the corresponding rx_ring or tx_ring is
assigned NULL, while its related work is not destroyed. When scheduled,
the work will access NULL pointer.

Fixes: 9d32e4e7e9e1 ("nfp: add support for coalesce adaptive feature")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: kcs_bmc: Fix a memory leak in the error handling path of 'kcs_bmc_serio_add_device()'

[ Upstream commit f281d010b87454e72475b668ad66e34961f744e0 ]

In the unlikely event where 'devm_kzalloc()' fails and 'kzalloc()'
succeeds, 'port' would be leaking.

Test each allocation separately to avoid the leak.

Fixes: 3a3d2f6a4c64 ("ipmi: kcs_bmc: Add serio adaptor")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <ecbfa15e94e64f4b878ecab1541ea46c74807670.1631048724.git.christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: Toggle PLL settings during rate change

[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]

For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.

Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.

Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: return true only for pathmtu update in sctp_transport_pl_toobig

[ Upstream commit 75cf662c64dd8543f56c329c69eba18141c8fd9f ]

sctp_transport_pl_toobig() supposes to return true only if there's
pathmtu update, so that in sctp_icmp_frag_needed() it would call
sctp_assoc_sync_pmtu() and sctp_retransmit(). This patch is to fix
these return places in sctp_transport_pl_toobig().

Fixes: 836964083177 ("sctp: do state transition when receiving an icmp TOOBIG packet")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: subtract sctphdr len in sctp_transport_pl_hlen

[ Upstream commit cc4665ca646c96181a7c00198aa72c59e0c576e8 ]

sctp_transport_pl_hlen() is called to calculate the outer header length
for PL. However, as the Figure in rfc8899#section-4.4:

   Any additional
     headers         .--- MPS -----.
            |        |             |
            v        v             v
     +------------------------------+
     | IP | ** | PL | protocol data |
     +------------------------------+

                <----- PLPMTU ----->
     <---------- PMTU -------------->

Outer header are IP + Any additional headers, which doesn't include
Packetization Layer itself header, namely sctphdr, whereas sctphdr
is counted by __sctp_mtu_payload().

The incorrect calculation caused the link pathmtu to be set larger
than expected by t->pl.pmtu + sctp_transport_pl_hlen(). This patch
is to fix it by subtracting sctphdr len in sctp_transport_pl_hlen().

Fixes: d9e2e410ae30 ("sctp: add the constants/variables and states and some APIs for transport")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: reset probe_timer in sctp_transport_pl_update

[ Upstream commit c6ea04ea692fa0d8e7faeb133fcd28e3acf470a0 ]

sctp_transport_pl_update() is called when transport update its dst and
pathmtu, instead of stopping the PLPMTUD probe timer, PLPMTUD should
start over and reset the probe timer. Otherwise, the PLPMTUD service
would stop.

Fixes: 92548ec2f1f9 ("sctp: add the probe timer in transport for PLPMTUD")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: allow IP fragmentation when PLPMTUD enters Error state

[ Upstream commit 40171248bb8934537fec8fbaf718e57c8add187c ]

Currently when PLPMTUD enters Error state, transport pathmtu will be set
to MIN_PLPMTU(512) while probe is continuing with BASE_PLPMTU(1200). It
will cause pathmtu to stay in a very small value, even if the real pmtu
is some value like 1000.

RFC8899 doesn't clearly say how to set the value in Error state. But one
possibility could be keep using BASE_PLPMTU for the real pmtu, but allow
to do IP fragmentation when it's in Error state.

As it says in rfc8899#section-5.4:

   Some paths could be unable to sustain packets of the BASE_PLPMTU
   size.  The Error State could be implemented to provide robustness to
   such paths.  This allows fallback to a smaller than desired PLPMTU
   rather than suffer connectivity failure.  This could utilize methods
   such as endpoint IP fragmentation to enable the PL sender to
   communicate using packets smaller than the BASE_PLPMTU.

This patch is to set pmtu to BASE_PLPMTU instead of MIN_PLPMTU for Error
state in sctp_transport_pl_send/toobig(), and set packet ipfragok for
non-probe packets when it's in Error state.

Fixes: 1dc68c194571 ("sctp: do state transition when PROBE_COUNT == MAX_PROBES on HB send path")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix memory leak in test_ima

[ Upstream commit efadf2ad17a2d5dc90bda4e6e8b2f96af4c62dae ]

The allocated ring buffer is never freed, do so in the cleanup path.

Fixes: f446b570ac7e ("bpf/selftests: Update the IMA test to use BPF ring buffer")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-9-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix fd cleanup in sk_lookup test

[ Upstream commit c3fc706e94f5653def2783ffcd809a38676b7551 ]

Similar to the fix in commit:
e31eec77e4ab ("bpf: selftests: Fix fd cleanup in get_branch_snapshot")

We use designated initializer to set fds to -1 without breaking on
future changes to MAX_SERVER constant denoting the array size.

The particular close(0) occurs on non-reuseport tests, so it can be seen
with -n 115/{2,3} but not 115/4. This can cause problems with future
tests if they depend on BTF fd never being acquired as fd 0, breaking
internal libbpf assumptions.

Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-8-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits

[ Upstream commit 403475be6d8b122c3e6b8a47e075926d7299e5ef ]

The DMA mask on SI parts is 40 bits not 44. Copy
paste typo.

Fixes: 244511f386ccb9 ("drm/amdgpu: simplify and cleanup setting the dma mask")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1762
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix a potential memory leak in amdgpu_device_fini_sw()

[ Upstream commit a5c5d8d50ecf5874be90a76e1557279ff8a30c9e ]

amdgpu_fence_driver_sw_fini() should be executed before
amdgpu_device_ip_fini(), otherwise fence driver resource
won't be properly freed as adev->rings have been tore down.

Fixes: 72c8c97b1522 ("drm/amdgpu: Split amdgpu_device_fini into early and late")

Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wcn36xx: Channel list update before hardware scan

[ Upstream commit d707f812bb0513ea0030d0c9fe2a456bae5a4583 ]

The channel scan list must be updated before triggering a hardware scan
so that firmware takes into account the regulatory info for each single
channel such as active/passive config, power, DFS, etc... Without this
the firmware uses its own internal default channel configuration, which
is not aligned with mac80211 regulatory rules, and misses several
channels (e.g. 144).

Fixes: 2f3bef4b247e ("wcn36xx: Add hardware scan offload support")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635175328-25642-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fixes possible race in update_prog_stats() for 32bit arches

[ Upstream commit d979617aa84d96acca44c2f5778892b4565e322f ]

It seems update_prog_stats() suffers from same issue fixed
in the prior patch:

As it can run while interrupts are enabled, it could
be re-entered and the u64_stats syncp could be mangled.

Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-3-eric.dumazet@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Avoid races in __bpf_prog_run() for 32bit arches

[ Upstream commit f941eadd8d6d4ee2f8c9aeab8e1da5e647533a7d ]

__bpf_prog_run() can run from non IRQ contexts, meaning
it could be re entered if interrupted.

This calls for the irq safe variant of u64_stats_update_{begin|end},
or risk a deadlock.

This patch is a nop on 64bit arches, fortunately.

syzbot report:

WARNING: inconsistent lock state
5.12.0-rc3-syzkaller #0 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
udevd/4013 [HC0[0]:SC0[0]:HE1:SE1] takes:
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: sk_filter include/linux/filter.h:867 [inline]
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: do_one_broadcast net/netlink/af_netlink.c:1468 [inline]
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: netlink_broadcast_filtered+0x27c/0x4fc net/netlink/af_netlink.c:1520
{IN-SOFTIRQ-W} state was registered at:
  lock_acquire.part.0+0xf0/0x41c kernel/locking/lockdep.c:5510
  lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5483
  do_write_seqcount_begin_nested include/linux/seqlock.h:520 [inline]
  do_write_seqcount_begin include/linux/seqlock.h:545 [inline]
  u64_stats_update_begin include/linux/u64_stats_sync.h:129 [inline]
  bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline]
  bpf_prog_run_clear_cb+0x1bc/0x270 include/linux/filter.h:755
  run_filter+0xa0/0x17c net/packet/af_packet.c:2031
  packet_rcv+0xc0/0x3e0 net/packet/af_packet.c:2104
  dev_queue_xmit_nit+0x2bc/0x39c net/core/dev.c:2387
  xmit_one net/core/dev.c:3588 [inline]
  dev_hard_start_xmit+0x94/0x518 net/core/dev.c:3609
  sch_direct_xmit+0x11c/0x1f0 net/sched/sch_generic.c:313
  qdisc_restart net/sched/sch_generic.c:376 [inline]
  __qdisc_run+0x194/0x7f8 net/sched/sch_generic.c:384
  qdisc_run include/net/pkt_sched.h:136 [inline]
  qdisc_run include/net/pkt_sched.h:128 [inline]
  __dev_xmit_skb net/core/dev.c:3795 [inline]
  __dev_queue_xmit+0x65c/0xf84 net/core/dev.c:4150
  dev_queue_xmit+0x14/0x18 net/core/dev.c:4215
  neigh_resolve_output net/core/neighbour.c:1491 [inline]
  neigh_resolve_output+0x170/0x228 net/core/neighbour.c:1471
  neigh_output include/net/neighbour.h:510 [inline]
  ip6_finish_output2+0x2e4/0x9fc net/ipv6/ip6_output.c:117
  __ip6_finish_output net/ipv6/ip6_output.c:182 [inline]
  __ip6_finish_output+0x164/0x3f8 net/ipv6/ip6_output.c:161
  ip6_finish_output+0x2c/0xb0 net/ipv6/ip6_output.c:192
  NF_HOOK_COND include/linux/netfilter.h:290 [inline]
  ip6_output+0x74/0x294 net/ipv6/ip6_output.c:215
  dst_output include/net/dst.h:448 [inline]
  NF_HOOK include/linux/netfilter.h:301 [inline]
  NF_HOOK include/linux/netfilter.h:295 [inline]
  mld_sendpack+0x2a8/0x7e4 net/ipv6/mcast.c:1679
  mld_send_cr net/ipv6/mcast.c:1975 [inline]
  mld_ifc_timer_expire+0x1e8/0x494 net/ipv6/mcast.c:2474
  call_timer_fn+0xd0/0x570 kernel/time/timer.c:1431
  expire_timers kernel/time/timer.c:1476 [inline]
  __run_timers kernel/time/timer.c:1745 [inline]
  run_timer_softirq+0x2e4/0x384 kernel/time/timer.c:1758
  __do_softirq+0x204/0x7ac kernel/softirq.c:345
  do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline]
  invoke_softirq kernel/softirq.c:228 [inline]
  __irq_exit_rcu+0x1d8/0x200 kernel/softirq.c:422
  irq_exit+0x10/0x3c kernel/softirq.c:446
  __handle_domain_irq+0xb4/0x120 kernel/irq/irqdesc.c:692
  handle_domain_irq include/linux/irqdesc.h:176 [inline]
  gic_handle_irq+0x84/0xac drivers/irqchip/irq-gic.c:370
  __irq_svc+0x5c/0x94 arch/arm/kernel/entry-armv.S:205
  debug_smp_processor_id+0x0/0x24 lib/smp_processor_id.c:53
  rcu_read_lock_held_common kernel/rcu/update.c:108 [inline]
  rcu_read_lock_sched_held+0x24/0x7c kernel/rcu/update.c:123
  trace_lock_acquire+0x24c/0x278 include/trace/events/lock.h:13
  lock_acquire+0x3c/0x74 kernel/locking/lockdep.c:5481
  rcu_lock_acquire include/linux/rcupdate.h:267 [inline]
  rcu_read_lock include/linux/rcupdate.h:656 [inline]
  avc_has_perm_noaudit+0x6c/0x260 security/selinux/avc.c:1150
  selinux_inode_permission+0x140/0x220 security/selinux/hooks.c:3141
  security_inode_permission+0x44/0x60 security/security.c:1268
  inode_permission.part.0+0x5c/0x13c fs/namei.c:521
  inode_permission fs/namei.c:494 [inline]
  may_lookup fs/namei.c:1652 [inline]
  link_path_walk.part.0+0xd4/0x38c fs/namei.c:2208
  link_path_walk fs/namei.c:2189 [inline]
  path_lookupat+0x3c/0x1b8 fs/namei.c:2419
  filename_lookup+0xa8/0x1a4 fs/namei.c:2453
  user_path_at_empty+0x74/0x90 fs/namei.c:2733
  do_readlinkat+0x5c/0x12c fs/stat.c:417
  __do_sys_readlink fs/stat.c:450 [inline]
  sys_readlink+0x24/0x28 fs/stat.c:447
  ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64
  0x7eaa4974
irq event stamp: 298277
hardirqs last  enabled at (298277): [<802000d0>] no_work_pending+0x4/0x34
hardirqs last disabled at (298276): [<8020c9b8>] do_work_pending+0x9c/0x648 arch/arm/kernel/signal.c:676
softirqs last  enabled at (298216): [<8020167c>] __do_softirq+0x584/0x7ac kernel/softirq.c:372
softirqs last disabled at (298201): [<8024dff4>] do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline]
softirqs last disabled at (298201): [<8024dff4>] invoke_softirq kernel/softirq.c:228 [inline]
softirqs last disabled at (298201): [<8024dff4>] __irq_exit_rcu+0x1d8/0x200 kernel/softirq.c:422

other info that might help us debug this:
Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&pstats->syncp)->seq);
  <Interrupt>
    lock(&(&pstats->syncp)->seq);

*** DEADLOCK ***

1 lock held by udevd/4013:
#0: 82b09c5c (rcu_read_lock){....}-{1:2}, at: sk_filter_trim_cap+0x54/0x434 net/core/filter.c:139

stack backtrace:
CPU: 1 PID: 4013 Comm: udevd Not tainted 5.12.0-rc3-syzkaller #0
Hardware name: ARM-Versatile Express
Backtrace:
[<81802550>] (dump_backtrace) from [<818027c4>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
r7:00000080 r6:600d0093 r5:00000000 r4:82b58344
[<818027ac>] (show_stack) from [<81809e98>] (__dump_stack lib/dump_stack.c:79 [inline])
[<818027ac>] (show_stack) from [<81809e98>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120)
[<81809de0>] (dump_stack) from [<81804a00>] (print_usage_bug.part.0+0x228/0x230 kernel/locking/lockdep.c:3806)
r7:86bcb768 r6:81a0326c r5:830f96a8 r4:86bcb0c0
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (print_usage_bug kernel/locking/lockdep.c:3776 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (valid_state kernel/locking/lockdep.c:3818 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (mark_lock_irq kernel/locking/lockdep.c:4021 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (mark_lock.part.0+0xc34/0x136c kernel/locking/lockdep.c:4478)
r10:83278fe8 r9:82c6d748 r8:00000000 r7:82c6d2d4 r6:00000004 r5:86bcb768
r4:00000006
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (mark_lock kernel/locking/lockdep.c:4442 [inline])
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (mark_usage kernel/locking/lockdep.c:4391 [inline])
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (__lock_acquire+0x9bc/0x3318 kernel/locking/lockdep.c:4854)
r10:86bcb768 r9:86bcb0c0 r8:00000001 r7:00040000 r6:0000075a r5:830f96a8
r4:00000000
[<802bbc88>] (__lock_acquire) from [<802bfb90>] (lock_acquire.part.0+0xf0/0x41c kernel/locking/lockdep.c:5510)
r10:00000000 r9:600d0013 r8:00000000 r7:00000000 r6:828a2680 r5:828a2680
r4:861e5bc8
[<802bfaa0>] (lock_acquire.part.0) from [<802bff28>] (lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5483)
r10:8146137c r9:00000000 r8:00000001 r7:00000000 r6:00000000 r5:00000000
r4:ff7c9dec
[<802bfebc>] (lock_acquire) from [<81381eb4>] (do_write_seqcount_begin_nested include/linux/seqlock.h:520 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (do_write_seqcount_begin include/linux/seqlock.h:545 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (u64_stats_update_begin include/linux/u64_stats_sync.h:129 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (__bpf_prog_run_save_cb include/linux/filter.h:727 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (bpf_prog_run_save_cb include/linux/filter.h:741 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (sk_filter_trim_cap+0x26c/0x434 net/core/filter.c:149)
r10:a4095dd0 r9:ff7c9dd0 r8:e44be000 r7:8146137c r6:00000001 r5:8611ba80
r4:00000000
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (sk_filter include/linux/filter.h:867 [inline])
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (do_one_broadcast net/netlink/af_netlink.c:1468 [inline])
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (netlink_broadcast_filtered+0x27c/0x4fc net/netlink/af_netlink.c:1520)
r10:00000001 r9:833d6b1c r8:00000000 r7:8572f864 r6:8611ba80 r5:8698d800
r4:8572f800
[<81461100>] (netlink_broadcast_filtered) from [<81463e60>] (netlink_broadcast net/netlink/af_netlink.c:1544 [inline])
[<81461100>] (netlink_broadcast_filtered) from [<81463e60>] (netlink_sendmsg+0x3d0/0x478 net/netlink/af_netlink.c:1925)
r10:00000000 r9:00000002 r8:8698d800 r7:000000b7 r6:8611b900 r5:861e5f50
r4:86aa3000
[<81463a90>] (netlink_sendmsg) from [<81321f54>] (sock_sendmsg_nosec net/socket.c:654 [inline])
[<81463a90>] (netlink_sendmsg) from [<81321f54>] (sock_sendmsg+0x3c/0x4c net/socket.c:674)
r10:00000000 r9:861e5dd4 r8:00000000 r7:86570000 r6:00000000 r5:86570000
r4:861e5f50
[<81321f18>] (sock_sendmsg) from [<813234d0>] (____sys_sendmsg+0x230/0x29c net/socket.c:2350)
r5:00000040 r4:861e5f50
[<813232a0>] (____sys_sendmsg) from [<8132549c>] (___sys_sendmsg+0xac/0xe4 net/socket.c:2404)
r10:00000128 r9:861e4000 r8:00000000 r7:00000000 r6:86570000 r5:861e5f50
r4:00000000
[<813253f0>] (___sys_sendmsg) from [<81325684>] (__sys_sendmsg net/socket.c:2433 [inline])
[<813253f0>] (___sys_sendmsg) from [<81325684>] (__do_sys_sendmsg net/socket.c:2442 [inline])
[<813253f0>] (___sys_sendmsg) from [<81325684>] (sys_sendmsg+0x58/0xa0 net/socket.c:2440)
r8:80200224 r7:00000128 r6:00000000 r5:7eaa541c r4:86570000
[<8132562c>] (sys_sendmsg) from [<80200060>] (ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64)
Exception stack(0x861e5fa8 to 0x861e5ff0)
5fa0:                   00000000 00000000 0000000c 7eaa541c 00000000 00000000
5fc0: 00000000 00000000 76fbf840 00000128 00000000 0000008f 7eaa541c 000563f8
5fe0: 00056110 7eaa53e0 00036cec 76c9bf44
r6:76fbf840 r5:00000000 r4:00000000

Fixes: 492ecee892c2 ("bpf: enable program stats")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-2-eric.dumazet@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wcn36xx: Fix discarded frames due to wrong sequence number

[ Upstream commit 113f304dbc1627c6ec9d5329d839964095768980 ]

The firmware is offering features such as ARP offload, for which
firmware crafts its own (QoS)packets without waking up the host.
Point is that the sequence numbers generated by the firmware are
not in sync with the host mac80211 layer and can cause packets
such as firmware ARP reponses to be dropped by the AP (too old SN).

To fix this we need to let the firmware manages the sequence
numbers by its own (except for QoS null frames). There is a SN
counter for each QoS queue and one global/baseline counter for
Non-QoS.

Fixes: 84aff52e4f57 ("wcn36xx: Use sequence number allocated by mac80211")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635150336-18736-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

wcn36xx: add proper DMA memory barriers in rx path

[ Upstream commit 9bfe38e064af5decba2ffce66a2958ab8b10eaa4 ]

This is essentially exactly following the dma_wmb()/dma_rmb() usage
instructions in Documentation/memory-barriers.txt.

The theoretical races here are:

1. DXE (the DMA Transfer Engine in the Wi-Fi subsystem) seeing the
dxe->ctrl & WCN36xx_DXE_CTRL_VLD write before the dxe->dst_addr_l
write, thus performing DMA into the wrong address.

2. CPU reading dxe->dst_addr_l before DXE unsets dxe->ctrl &
WCN36xx_DXE_CTRL_VLD. This should generally be harmless since DXE
doesn't write dxe->dst_addr_l (no risk of freeing the wrong skb).

Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211023001528.3077822-1-benl@squareup.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

libertas: Fix possible memory leak in probe and disconnect

[ Upstream commit 9692151e2fe7a326bafe99836fd1f20a2cc3a049 ]

I got memory leak as follows when doing fault injection test:

unreferenced object 0xffff88812c7d7400 (size 512):
  comm "kworker/6:1", pid 176, jiffies 4295003332 (age 822.830s)
  hex dump (first 32 bytes):
    00 68 1e 04 81 88 ff ff 01 00 00 00 00 00 00 00  .h..............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
    [<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
    [<ffffffffa02c9873>] if_usb_probe+0x63/0x446 [usb8xxx]
    [<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
    [<ffffffff82b59630>] really_probe+0x190/0x480
    [<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180
    [<ffffffff82b59af3>] driver_probe_device+0x53/0x130
    [<ffffffff82b5a075>] __device_attach_driver+0x105/0x130
    [<ffffffff82b55949>] bus_for_each_drv+0x129/0x190
    [<ffffffff82b593c9>] __device_attach+0x1c9/0x270
    [<ffffffff82b5a250>] device_initial_probe+0x20/0x30
    [<ffffffff82b579c2>] bus_probe_device+0x142/0x160
    [<ffffffff82b52e49>] device_add+0x829/0x1300
    [<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore]
    [<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore]
    [<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore]

cardp is missing being freed in the error handling path of the probe
and the path of the disconnect, which will cause memory leak.

This patch adds the missing kfree().

Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211020120345.2016045-3-wanghai38@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

libertas_tf: Fix possible memory leak in probe and disconnect

[ Upstream commit d549107305b4634c81223a853701c06bcf657bc3 ]

I got memory leak as follows when doing fault injection test:

unreferenced object 0xffff88810a2ddc00 (size 512):
  comm "kworker/6:1", pid 176, jiffies 4295009893 (age 757.220s)
  hex dump (first 32 bytes):
    00 50 05 18 81 88 ff ff 00 00 00 00 00 00 00 00  .P..............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490
    [<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470
    [<ffffffffa02a1530>] if_usb_probe+0x60/0x37c [libertas_tf_usb]
    [<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore]
    [<ffffffff82b59630>] really_probe+0x190/0x480
    [<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180
    [<ffffffff82b59af3>] driver_probe_device+0x53/0x130
    [<ffffffff82b5a075>] __device_attach_driver+0x105/0x130
    [<ffffffff82b55949>] bus_for_each_drv+0x129/0x190
    [<ffffffff82b593c9>] __device_attach+0x1c9/0x270
    [<ffffffff82b5a250>] device_initial_probe+0x20/0x30
    [<ffffffff82b579c2>] bus_probe_device+0x142/0x160
    [<ffffffff82b52e49>] device_add+0x829/0x1300
    [<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore]
    [<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore]
    [<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore]

cardp is missing being freed in the error handling path of the probe
and the path of the disconnect, which will cause memory leak.

This patch adds the missing kfree().

Fixes: c305a19a0d0a ("libertas_tf: usb specific functions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211020120345.2016045-2-wanghai38@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: Fix handle_sske page fault handling

[ Upstream commit 85f517b29418158d3e6e90c3f0fc01b306d2f1a1 ]

If handle_sske cannot set the storage key, because there is no
page table entry or no present large page entry, it calls
fixup_user_fault.
However, currently, if the call succeeds, handle_sske returns
-EAGAIN, without having set the storage key.
Instead, retry by continue'ing the loop without incrementing the
address.
The same issue in handle_pfmf was fixed by
a11bdb1a6b78 ("KVM: s390: Fix pfmf and conditional skey emulation").

Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20211022152648.26536-1-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/kretprobes: Fix return value if register_kretprobe() failed

[ Upstream commit f76fbbbb5061fe14824ba5807c44bd7400a6b4e1 ]

Use the actual return value instead of always -1 if register_kretprobe()
failed.

E.g. without this patch:

# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Operation not permitted

With this patch:

# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Unknown symbol in module

Link: https://lkml.kernel.org/r/1635213091-24387-2-git-send-email-yangtiezhu@loongson.cn
Fixes: 804defea1c02 ("Kprobes: move kprobe examples to samples/")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-rpc-if: Check return value of rpcif_sw_init()

[ Upstream commit 0b0a281ed7001d4c4f4c47bdc84680c4997761ca ]

rpcif_sw_init() can fail so make sure we check the return value
of it and on error exit rpcif_spi_probe() callback with error code.

Fixes: eb8d6d464a27 ("spi: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211025205631.21151-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: intel_pstate: Fix cpu->pstate.turbo_freq initialization

[ Upstream commit c72bcf0ab87a92634e58af62e89af0f40dfd0b88 ]

Fix a problem in active mode that cpu->pstate.turbo_freq is initialized
only if HWP-to-frequency scaling factor is refined.

In passive mode, this problem is not exposed, because
cpu->pstate.turbo_freq is set again, later in
intel_cpufreq_cpu_init()->intel_pstate_get_hwp_cap().

Fixes: eb3693f0521e ("cpufreq: intel_pstate: hybrid: CPU-specific scaling factor")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix missing trace_boot_init_histograms kstrdup NULL checks

[ Upstream commit 3c20bd3af535d64771b193bb4dd41ed662c464ce ]

trace_boot_init_histograms misses NULL pointer checks for kstrdup
failure.

Link: https://lkml.kernel.org/r/20211015195550.22742-1-mathieu.desnoyers@efficios.com
Fixes: 64dc7f6958ef5 ("tracing/boot: Show correct histogram error command")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: don't free a FIN sk_buff in tcp_remove_empty_skb()

[ Upstream commit cf12e6f9124629b18a6182deefc0315f0a73a199 ]

v1: Implement a more general statement as recommended by Eric Dumazet. The
sequence number will be advanced, so this check will fix the FIN case and
other cases.

A customer reported sockets stuck in the CLOSING state. A Vmcore revealed that
the write_queue was not empty as determined by tcp_write_queue_empty() but the
sk_buff containing the FIN flag had been freed and the socket was zombied in
that state. Corresponding pcaps show no FIN from the Linux kernel on the wire.

Some instrumentation was added to the kernel and it was found that there is a
timing window where tcp_sendmsg() can run after tcp_send_fin().

tcp_sendmsg() will hit an error, for example:

1269 ▹ if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN))↩
1270 ▹ ▹ goto do_error;↩

tcp_remove_empty_skb() will then free the FIN sk_buff as "skb->len == 0". The
TCP socket is now wedged in the FIN-WAIT-1 state because the FIN is never sent.

If the other side sends a FIN packet the socket will transition to CLOSING and
remain that way until the system is rebooted.

Fix this by checking for the FIN flag in the sk_buff and don't free it if that
is the case. Testing confirmed that fixed the issue.

Fixes: fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Reported-by: Monir Zouaoui <Monir.Zouaoui@mail.schwarz>
Reported-by: Simon Stier <simon.stier@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix endianness detection in BPF_CORE_READ_BITFIELD_PROBED()

[ Upstream commit 45f2bebc8079788f62f22d9e8b2819afb1789d7b ]

__BYTE_ORDER is supposed to be defined by a libc, and __BYTE_ORDER__ -
by a compiler. bpf_core_read.h checks __BYTE_ORDER == __LITTLE_ENDIAN,
which is true if neither are defined, leading to incorrect behavior on
big-endian hosts if libc headers are not included, which is often the
case.

Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-2-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm_tis_spi: Add missing SPI ID

[ Upstream commit 7eba41fe8c7bb01ff3d4b757bd622375792bc720 ]

In commit c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
we added SPI IDs for all the DT aliases to handle the fact that we always
use SPI modaliases to load modules even when probed via DT however the
mentioned commit missed that the SPI and OF device ID entries did not
match and were different and so DT nodes with compatible
"tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi
rather than just fix the existing one since what's currently there is
going to be better for anyone actually using SPI IDs to instantiate.

Fixes: c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm: fix Atmel TPM crash caused by too frequent queries

[ Upstream commit 79ca6f74dae067681a779fd573c2eb59649989bc ]

The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```

The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0  TPM 1.2 Version Info:
  Chip Version:        1.2.66.1
  Spec Level:          2
  Errata Revision:     3
  TPM Vendor ID:       ATML
  TPM Version:         01010000
  Manufacturer Info:   41544d4c
```

The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.

A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.

To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.

References:
[1] 9f3fc7bcddcb tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2] cf151a9a44d5 tpm: reduce tpm polling delay in tpm_tis_core
[3] 59f5a6b07f64 tpm: reduce poll sleep time in tpm_transmit()
[4] 424eaf910c32 tpm: reduce polling time to usecs for even finer
granularity

Fixes: 9f3fc7bcddcb ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/
Signed-off-by: Hao Wu <hao.wu@rubrik.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix off-by-one bug in bpf_core_apply_relo()

[ Upstream commit de5d0dcef602de39070c31c7e56c58249c56ba37 ]

Fix instruction index validity check which has off-by-one error.

Fixes: 3ee4f5335511 ("libbpf: Split bpf_core_apply_relo() into bpf_program independent helper.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-cgroup: synchronize blkg creation against policy deactivation

[ Upstream commit 0c9d338c8443b06da8e8d3bfce824c5ea6d3488f ]

Our test reports a null pointer dereference:

[  168.534653] ==================================================================
[  168.535614] Disabling lock debugging due to kernel taint
[  168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008
[  168.537274] #PF: supervisor read access in kernel mode
[  168.537964] #PF: error_code(0x0000) - not-present page
[  168.538667] PGD 0 P4D 0
[  168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN
[  168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G    B             5.15.0-rc2-next-202100
[  168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364
[  168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0
[  168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0
[  168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002
[  168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000
[  168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428
[  168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001
[  168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000
[  168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0
[  168.551221] FS:  00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000
[  168.552278] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0
[  168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  168.555888] Call Trace:
[  168.556221]  <TASK>
[  168.556510]  blkg_create+0x1c0/0x8c0
[  168.556989]  blkg_conf_prep+0x574/0x650
[  168.557502]  ? stack_trace_save+0x99/0xd0
[  168.558033]  ? blkcg_conf_open_bdev+0x1b0/0x1b0
[  168.558629]  tg_set_conf.constprop.0+0xb9/0x280
[  168.559231]  ? kasan_set_track+0x29/0x40
[  168.559758]  ? kasan_set_free_info+0x30/0x60
[  168.560344]  ? tg_set_limit+0xae0/0xae0
[  168.560853]  ? do_sys_openat2+0x33b/0x640
[  168.561383]  ? do_sys_open+0xa2/0x100
[  168.561877]  ? __x64_sys_open+0x4e/0x60
[  168.562383]  ? __kasan_check_write+0x20/0x30
[  168.562951]  ? copyin+0x48/0x70
[  168.563390]  ? _copy_from_iter+0x234/0x9e0
[  168.563948]  tg_set_conf_u64+0x17/0x20
[  168.564467]  cgroup_file_write+0x1ad/0x380
[  168.565014]  ? cgroup_file_poll+0x80/0x80
[  168.565568]  ? __mutex_lock_slowpath+0x30/0x30
[  168.566165]  ? pgd_free+0x100/0x160
[  168.566649]  kernfs_fop_write_iter+0x21d/0x340
[  168.567246]  ? cgroup_file_poll+0x80/0x80
[  168.567796]  new_sync_write+0x29f/0x3c0
[  168.568314]  ? new_sync_read+0x410/0x410
[  168.568840]  ? __handle_mm_fault+0x1c97/0x2d80
[  168.569425]  ? copy_page_range+0x2b10/0x2b10
[  168.570007]  ? _raw_read_lock_bh+0xa0/0xa0
[  168.570622]  vfs_write+0x46e/0x630
[  168.571091]  ksys_write+0xcd/0x1e0
[  168.571563]  ? __x64_sys_read+0x60/0x60
[  168.572081]  ? __kasan_check_write+0x20/0x30
[  168.572659]  ? do_user_addr_fault+0x446/0xff0
[  168.573264]  __x64_sys_write+0x46/0x60
[  168.573774]  do_syscall_64+0x35/0x80
[  168.574264]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  168.574960] RIP: 0033:0x7fac74915130
[  168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444
[  168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130
[  168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001
[  168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700
[  168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009
[  168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0
[  168.583757]  </TASK>
[  168.584063] Modules linked in:
[  168.584494] CR2: 0000000000000008
[  168.584964] ---[ end trace 2475611ad0f77a1a ]---

This is because blkg_alloc() is called from blkg_conf_prep() without
holding 'q->queue_lock', and elevator is exited before blkg_create():

thread 1                            thread 2
blkg_conf_prep
spin_lock_irq(&q->queue_lock);
blkg_lookup_check -> return NULL
spin_unlock_irq(&q->queue_lock);

blkg_alloc
  blkcg_policy_enabled -> true
  pd = ->pd_alloc_fn
  blkg->pd[i] = pd
                                   blk_mq_exit_sched
                                    bfq_exit_queue
                                     blkcg_deactivate_policy
                                      spin_lock_irq(&q->queue_lock);
                                      __clear_bit(pol->plid, q->blkcg_pols);
                                      spin_unlock_irq(&q->queue_lock);
                                    q->elevator = NULL;
  spin_lock_irq(&q->queue_lock);
   blkg_create
    if (blkg->pd[i])
     ->pd_init_fn -> q->elevator is NULL
  spin_unlock_irq(&q->queue_lock);

Because blkcg_deactivate_policy() requires queue to be frozen, we can
grab q_usage_counter to synchoronize blkg_conf_prep() against
blkcg_deactivate_policy().

Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20211020014036.2141723-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: ataflop: more blk-mq refactoring fixes

[ Upstream commit d28e4dff085c5a87025c9a0a85fb798bd8e9ca17 ]

As it turns out, my earlier patch in commit 86d46fdaa12a (block:
ataflop: fix breakage introduced at blk-mq refactoring) was
incomplete. This patch fixes any remaining issues found during
more testing and code review.

Requests exceeding 4 k are handled in 4k segments but
__blk_mq_end_request() is never called on these (still
sectors outstanding on the request). With redo_fd_request()
removed, there is no provision to kick off processing of the
next segment, causing requests exceeding 4k to hang. (By
setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround,
this behaviour can be avoided).

Instead of reintroducing redo_fd_request(), requeue the remainder
of the request by calling blk_mq_requeue_request() on incomplete
requests (i.e. when blk_update_request() still returns true), and
rely on the block layer to queue the residual as new request.

Both error handling and formatting needs to release the
ST-DMA lock, so call finish_fdc() on these (this was previously
handled by redo_fd_request()). finish_fdc() may be called
legitimately without the ST-DMA lock held - make sure we only
release the lock if we actually held it. In a similar way,
early exit due to errors in ataflop_queue_rq() must release
the lock.

After minor errors, fd_error sets up to recalibrate the drive
but never re-runs the current operation (another task handled by
redo_fd_request() before). Call do_fd_action() to get the next
steps (seek, retry read/write) underway.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff95f (ataflop: convert to blk-mq)
CC: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20211024002013.9332-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: fix module load regression with iram-recovery feature

[ Upstream commit 6f8c8bf4c7c9be1c42088689fd4370e06b46608a ]

Commit 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support")
introduced a new firmware feature flag ATH10K_FW_FEATURE_IRAM_RECOVERY. But
this caused ath10k_pci module load to fail if ATH10K_FW_CRASH_DUMP_RAM_DATA bit
was not enabled in the ath10k coredump_mask module parameter:

[ 2209.328190] ath10k_pci 0000:02:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 2209.434414] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1
[ 2209.547191] ath10k_pci 0000:02:00.0: firmware ver 10.4-3.9.0.2-00099 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate,iram-recovery crc32 cbade90a
[ 2210.896485] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id 0:1 crc32 a040efc2
[ 2213.603339] ath10k_pci 0000:02:00.0: failed to copy target iram contents: -12
[ 2213.839027] ath10k_pci 0000:02:00.0: could not init core (-12)
[ 2213.933910] ath10k_pci 0000:02:00.0: could not probe fw (-12)

And by default coredump_mask does not have ATH10K_FW_CRASH_DUMP_RAM_DATA
enabled so anyone using a firmware with iram-recovery feature would fail. To my
knowledge only QCA9984 firmwares starting from release 10.4-3.9.0.2-00099
enabled the feature.

The reason for regression was that ath10k_core_copy_target_iram() used
ath10k_coredump_get_mem_layout() to get the memory layout, but when
ATH10K_FW_CRASH_DUMP_RAM_DATA was disabled it would get just NULL and bail out
with an error.

While looking at all this I noticed another bug: if CONFIG_DEV_COREDUMP is
disabled but the firmware has iram-recovery enabled the module load fails with
similar error messages. I fixed that by returning 0 from
ath10k_core_copy_target_iram() when _ath10k_coredump_get_mem_layout() returns
NULL.

Tested-on: QCA9984 hw2.0 PCI 10.4-3.9.0.2-00139

Fixes: 9af7c32ceca8 ("ath10k: add target IRAM recovery feature support")
Signed-off-by: Abinaya Kalaiselvan <akalaise@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211020075054.23061-1-kvalo@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9142/1: kasan: work around LPAE build warning

[ Upstream commit c2e6df3eaaf120cde5e7c3a70590dd82e427458a ]

pgd_page_vaddr() returns an 'unsigned long' address, causing a warning
with the memcpy() call in kasan_init():

arch/arm/mm/kasan_init.c: In function 'kasan_init':
include/asm-generic/pgtable-nop4d.h:44:50: error: passing argument 2 of '__memcpy' makes pointer from integer without a cast [-Werror=int-conversion]
   44 | #define pgd_page_vaddr(pgd)                     ((unsigned long)(p4d_pgtable((p4d_t){ pgd })))
      |                                                 ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      |                                                  |
      |                                                  long unsigned int
arch/arm/include/asm/string.h:58:45: note: in definition of macro 'memcpy'
   58 | #define memcpy(dst, src, len) __memcpy(dst, src, len)
      |                                             ^~~
arch/arm/mm/kasan_init.c:229:16: note: in expansion of macro 'pgd_page_vaddr'
  229 |                pgd_page_vaddr(*pgd_offset_k(KASAN_SHADOW_START)),
      |                ^~~~~~~~~~~~~~
arch/arm/include/asm/string.h:21:47: note: expected 'const void *' but argument is of type 'long unsigned int'
   21 | extern void *__memcpy(void *dest, const void *src, __kernel_size_t n);
      |                                   ~~~~~~~~~~~~^~~

Avoid this by adding an explicit typecast.

Link: https://lore.kernel.org/all/CACRpkdb3DMvof3-xdtss0Pc6KM36pJA-iy=WhvtNVnsDpeJ24Q@mail.gmail.com/
Fixes: 5615f69bc209 ("ARM: 9016/2: Initialize the mapping of KASan shadow memory")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: avoid refcount warnings when ->port_{fdb,mdb}_del returns error

[ Upstream commit 232deb3f9567ce37d99b8616a6c07c1fc0436abf ]

At present, when either of ds->ops->port_fdb_del() or ds->ops->port_mdb_del()
return a non-zero error code, we attempt to save the day and keep the
data structure associated with that switchdev object, as the deletion
procedure did not complete.

However, the way in which we do this is suspicious to the checker in
lib/refcount.c, who thinks it is buggy to increment a refcount that
became zero, and that this is indicative of a use-after-free.

Fixes: 161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irq: mips: avoid nested irq_enter()

[ Upstream commit c65b52d02f6c1a06ddb20cba175ad49eccd6410d ]

As bcm6345_l1_irq_handle() is a chained irqchip handler, it will be
invoked within the context of the root irqchip handler, which must have
entered IRQ context already.

When bcm6345_l1_irq_handle() calls arch/mips's do_IRQ() , this will nest
another call to irq_enter(), and the resulting nested increment to
`rcu_data.dynticks_nmi_nesting` will cause rcu_is_cpu_rrupt_from_idle()
to fail to identify wakeups from idle, resulting in failure to preempt,
and RCU stalls.

Chained irqchip handlers must invoke IRQ handlers by way of thee core
irqchip code, i.e. generic_handle_irq() or generic_handle_domain_irq()
and should not call do_IRQ(), which is intended only for root irqchip
handlers.

Fix bcm6345_l1_irq_handle() by calling generic_handle_irq() directly.

Fixes: c7c42ec2baa1de7a ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm

[ Upstream commit 1e2aa46de526a5adafe580bca4c25856bb06f09e ]

When the system is heavily overcommitted, kvm_s390_pv_init_vm might
generate stall notifications.

Fix this by using uv_call_sched instead of just uv_call. This is ok because
we are not holding spinlocks.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 214d9bbcd3a672 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20210920132502.36111-4-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: pv: avoid double free of sida page

[ Upstream commit d4074324b07a94a1fca476d452dfbb3a4e7bf656 ]

If kvm_s390_pv_destroy_cpu is called more than once, we risk calling
free_page on a random page, since the sidad field is aliased with the
gbea, which is not guaranteed to be zero.

This can happen, for example, if userspace calls the KVM_PV_DISABLE
IOCTL, and it fails, and then userspace calls the same IOCTL again.
This scenario is only possible if KVM has some serious bug or if the
hardware is broken.

The solution is to simply return successfully immediately if the vCPU
was already non secure.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 19e1227768863a1469797c13ef8fea1af7beac2c ("KVM: S390: protvirt: Introduce instruction data area bounce buffer")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210920132502.36111-3-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/uv: fully validate the VMA before calling follow_page()

[ Upstream commit 46c22ffd2772201662350bc7b94b9ea9d3ee5ac2 ]

We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap").

find_vma() does not check if the address is >= the VMA start address;
use vma_lookup() instead.

Fixes: 214d9bbcd3a6 ("s390/mm: provide memory management functions for protected KVM guests")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/r/20210909162248.14969-6-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: fix VMA and page table handling code in storage key handling functions

[ Upstream commit 949f5c1244ee6c36d2e81c588d1200eaa83a3df6 ]

There are multiple things broken about our storage key handling
functions:

1. We should not walk/touch page tables outside of VMA boundaries when
   holding only the mmap sem in read mode. Evil user space can modify the
   VMA layout just before this function runs and e.g., trigger races with
   page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
   with read mmap_sem in munmap"). gfn_to_hva() will only translate using
   KVM memory regions, but won't validate the VMA.

2. We should not allocate page tables outside of VMA boundaries: if
   evil user space decides to map hugetlbfs to these ranges, bad things
   will happen because we suddenly have PTE or PMD page tables where we
   shouldn't have them.

3. We don't handle large PUDs that might suddenly appeared inside our page
   table hierarchy.

Don't manually allocate page tables, properly validate that we have VMA and
bail out on pud_large().

All callers of page table handling functions, except
get_guest_storage_key(), call fixup_user_fault() in case they
receive an -EFAULT and retry; this will allocate the necessary page tables
if required.

To keep get_guest_storage_key() working as expected and not requiring
kvm_s390_get_skeys() to call fixup_user_fault() distinguish between
"there is simply no page table or huge page yet and the key is assumed
to be 0" and "this is a fault to be reported".

Although commit 637ff9efe5ea ("s390/mm: Add huge pmd storage key handling")
introduced most of the affected code, it was actually already broken
before when using get_locked_pte() without any VMA checks.

Note: Ever since commit 637ff9efe5ea ("s390/mm: Add huge pmd storage key
handling") we can no longer set a guest storage key (for example from
QEMU during VM live migration) without actually resolving a fault.
Although we would have created most page tables, we would choke on the
!pmd_present(), requiring a call to fixup_user_fault(). I would
have thought that this is problematic in combination with postcopy life
migration ... but nobody noticed and this patch doesn't change the
situation. So maybe it's just fine.

Fixes: 9fcf93b5de06 ("KVM: S390: Create helper function get_guest_storage_key")
Fixes: 24d5dd0208ed ("s390/kvm: Provide function for setting the guest storage key")
Fixes: a7e19ab55ffd ("KVM: s390: handle missing storage-key facility")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-5-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: validate VMA in PGSTE manipulation functions

[ Upstream commit fe3d10024073f06f04c74b9674bd71ccc1d787cf ]

We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap"). gfn_to_hva() will only translate using
KVM memory regions, but won't validate the VMA.

Further, we should not allocate page tables outside of VMA boundaries: if
evil user space decides to map hugetlbfs to these ranges, bad things will
happen because we suddenly have PTE or PMD page tables where we
shouldn't have them.

Similarly, we have to check if we suddenly find a hugetlbfs VMA, before
calling get_locked_pte().

Fixes: 2d42f9477320 ("s390/kvm: Add PGSTE manipulation functions")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-4-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()

[ Upstream commit b159f94c86b43cf7e73e654bc527255b1f4eafc4 ]

... otherwise we will try unlocking a spinlock that was never locked via a
garbage pointer.

At the time we reach this code path, we usually successfully looked up
a PGSTE already; however, evil user space could have manipulated the VMA
layout in the meantime and triggered removal of the page table.

Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-3-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/gmap: validate VMA in __gmap_zap()

[ Upstream commit 2d8fb8f3914b40e3cc12f8cbb74daefd5245349d ]

We should not walk/touch page tables outside of VMA boundaries when
holding only the mmap sem in read mode. Evil user space can modify the
VMA layout just before this function runs and e.g., trigger races with
page table removal code since commit dd2283f2605e ("mm: mmap: zap pages
with read mmap_sem in munmap"). The pure prescence in our guest_to_host
radix tree does not imply that there is a VMA.

Further, we should not allocate page tables (via get_locked_pte()) outside
of VMA boundaries: if evil user space decides to map hugetlbfs to these
ranges, bad things will happen because we suddenly have PTE or PMD page
tables where we shouldn't have them.

Similarly, we have to check if we suddenly find a hugetlbfs VMA, before
calling get_locked_pte().

Note that gmap_discard() is different:
zap_page_range()->unmap_single_vma() makes sure to stay within VMA
boundaries.

Fixes: b31288fa83b2 ("s390/kvm: support collaborative memory management")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-2-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: mt7622: fix ibss and meshpoint

[ Upstream commit 753453afacc0243bd45de45e34218a8d17493e8f ]

commit 7f4b7920318b ("mt76: mt7615: add ibss support") introduced IBSS
and commit f4ec7fdf7f83 ("mt76: mt7615: enable support for mesh")
meshpoint support.

Both used in the "get_omac_idx"-function:

if (~mask & BIT(HW_BSSID_0))
return HW_BSSID_0;

With commit d8d59f66d136 ("mt76: mt7615: support 16 interfaces") the
ibss and meshpoint mode should "prefer hw bssid slot 1-3". However,
with that change the ibss or meshpoint mode will not send any beacon on
the mt7622 wifi anymore. Devices were still able to exchange data but
only if a bssid already existed. Two mt7622 devices will never be able
to communicate.

This commits reverts the preferation of slot 1-3 for ibss and
meshpoint. Only NL80211_IFTYPE_STATION will still prefer slot 1-3.

Tested on Banana Pi R64.

Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces")
Signed-off-by: Nick Hainke <vincent@systemli.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211007225725.2615-1-vincent@systemli.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix BTF header parsing checks

[ Upstream commit c825f5fee19caf301d9821cd79abaa734322de26 ]

Original code assumed fixed and correct BTF header length. That's not
always the case, though, so fix this bug with a proper additional check.
And use actual header length instead of sizeof(struct btf_header) in
sanity checks.

Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix overflow in BTF sanity checks

[ Upstream commit 5245dafe3d49efba4d3285cf27ee1cc1eeafafc6 ]

btf_header's str_off+str_len or type_off+type_len can overflow as they
are u32s. This will lead to bypassing the sanity checks during BTF
parsing, resulting in crashes afterwards. Fix by using 64-bit signed
integers for comparison.

Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Avoid leaking the JSON writer prepared for program metadata

[ Upstream commit e89ef634f81c9d90e1824ab183721f3b361472e6 ]

Bpftool creates a new JSON object for writing program metadata in plain
text mode, regardless of metadata being present or not. Then this writer
is freed if any metadata has been found and printed, but it leaks
otherwise. We cannot destroy the object unconditionally, because the
destructor prints an undesirable line break. Instead, make sure the
writer is created only after we have found program metadata to print.

Found with valgrind.

Fixes: aff52e685eb3 ("bpftool: Support dumping metadata")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022094743.11052-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix memory leak in btf__dedup()

[ Upstream commit 1000298c76830bc291358e98e8fa5baa3baa9b3a ]

Free btf_dedup if btf_ensure_modifiable() returns error.

Fixes: 919d2b1dbb07 ("libbpf: Allow modification of BTF and add btf__add_str API")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022202035.48868-1-mauricio@kinvolk.io
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: selftests: Fix nested SVM tests when built with clang

[ Upstream commit ed290e1c20da19fa100a3e0f421aa31b65984960 ]

Though gcc conveniently compiles a simple memset to "rep stos," clang
prefers to call the libc version of memset. If a test is dynamically
linked, the libc memset isn't available in L1 (nor is the PLT or the
GOT, for that matter). Even if the test is statically linked, the libc
memset may choose to use some CPU features, like AVX, which may not be
enabled in L1. Note that __builtin_memset doesn't solve the problem,
because (a) the compiler is free to call memset anyway, and (b)
__builtin_memset may also choose to use features like AVX, which may
not be available in L1.

To avoid a myriad of problems, use an explicit "rep stos" to clear the
VMCB in generic_svm_setup(), which is called both from L0 and L1.

Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes: 20ba262f8631a ("selftests: KVM: AMD Nested test infrastructure")
Message-Id: <20210930003649.4026553-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi

[ Upstream commit 0934ad42bb2c5df90a1b9de690f93de735b622fe ]

syzbot is reporting UAF at cipso_v4_doi_search() [1], for smk_cipso_doi()
is calling kfree() without removing from the cipso_v4_doi_list list after
netlbl_cfg_cipsov4_map_add() returned an error. We need to use
netlbl_cfg_cipsov4_del() in order to remove from the list and wait for
RCU grace period before kfree().

Link: https://syzkaller.appspot.com/bug?extid=93dba5b91f0fed312cbd
Reported-by: syzbot <syzbot+93dba5b91f0fed312cbd@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6c2e8ac0953fccdd ("netlabel: Update kernel configuration API")
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks

[ Upstream commit 3ae88f676aa63366ffa9eebb8ae787c7e19f0c57 ]

Commit ad6d66bcac77e ("crypto: tcrypt - include 1420 byte blocks in aead and skcipher benchmarks")
mentions:
> power-of-2 block size. So let's add 1420 bytes explicitly, and round
> it up to the next blocksize multiple of the algo in question if it
> does not support 1420 byte blocks.
but misses updating skcipher multi-buffer tests.

Fix this by using the proper (rounded) input size.

Fixes: ad6d66bcac77e ("crypto: tcrypt - include 1420 byte blocks in aead and skcipher benchmarks")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: fix wrong type in msm_dsi_host

[ Upstream commit 409af447c2a0a6e08ba190993a1153c91d3b11bd ]

Change byte_clk_rate, pixel_clk_rate, esc_clk_rate, and src_clk_rate
from u32 to unsigned long, since clk_get_rate() returns an unsigned long.

Fixes: a6bcddbc2ee1 ("drm/msm: dsi: Handle dual-channel for 6G as well")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>
Link: https://lore.kernel.org/r/20211020183438.32263-1-jesszhan@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Fix potential NULL dereference in DPU SSPP

[ Upstream commit 8bf71a5719b6cc5b6ba358096081e5d50ea23ab6 ]

Move initialization of sblk in _sspp_subblk_offset() after NULL check to
avoid potential NULL pointer dereference.

Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>
Link: https://lore.kernel.org/r/20211020175733.3379-1-jesszhan@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/sev: Fix stack type check in vc_switch_off_ist()

[ Upstream commit 5681981fb788281b09a4ea14d310d30b2bd89132 ]

The value of STACK_TYPE_EXCEPTION_LAST points to the last _valid_
exception stack. Reflect that in the check done in the
vc_switch_off_ist() function.

Fixes: a13644f3a53de ("x86/entry/64: Add entry code for #VC handler")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021080833.30875-2-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>