Jaehoon Chung [Mon, 5 Aug 2019 07:00:00 +0000 (16:00 +0900)]
board: samsung: add set_board_revision()
Add set_board_revision() function.
When build with tizen_defconfig, it can't refer to set_board_revision().
This function is taken from odroid.c.
Change-Id: I84897de5077860c0a1c81ad60e289e6cc8dcd05a
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 14 Mar 2019 08:14:27 +0000 (17:14 +0900)]
configs: rpi: enable MMC_BCM2835 configuration
Enable MMC_BCM2835 configuration.
Change-Id: Ic5cd05df99fc86157efd686ec6f5f69fd090ec72
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 5 Mar 2019 07:02:05 +0000 (16:02 +0900)]
configs: samsung: tizen_rpi: change SPL_ATF_TEXT_BASE to 0x08400000
Change SPL_ATF_TEXT_BASE form 0x8000 to 0x08400000.
In fit_spl_atf.its, it was defined to 0x08400000.
Change-Id: I4aa13f329ed61930f779f2b179fe8200073b9919
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 5 Mar 2019 02:14:17 +0000 (11:14 +0900)]
configs: samsung: tizen_rpi: add CONFIG_SPL_ATF_TEXT_BASE
Add CONFIG_SPL_ATF_TEXT_BASE as 0x8000.
Change-Id: I01c7488e81b0d27d9e35d86ff2910e531201ca75
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 3 Mar 2019 23:30:09 +0000 (08:30 +0900)]
config: samsung: tizen_rpi: remove redefined configuratins
Remove redefined configurations.
It was already defined in rpi header.
Change-Id: I3a5fc90b5f8176ab723dfce53a9c67e0cceab18b
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 26 Feb 2019 06:45:25 +0000 (15:45 +0900)]
rpi: tizen-boot: rpi3: remove unnecessary comment
Remove unnecessary comment.
Change-Id: I8eebe6b7e24101556ee444d0cebc75edb0d8e454
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 25 Feb 2019 05:01:16 +0000 (14:01 +0900)]
config: tizen_rpi: move some bootarg values to tizen_rpi header
Some bootargs values can be located to tizen_rpi header.
Because it's used same value in script of rpi3 and rpi3 32b.
Change-Id: I73d2d473d624f2ffa37f1fe0ed959ff098bb9247
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 22 Feb 2019 08:08:23 +0000 (17:08 +0900)]
config: tizen_rpi: support to enter the flash mode with command
Support to enter the flash mode with command.
- Refer to below command:
U-boot> run tfm
Change-Id: Ie5835573cdefb3ccfe3b67d3d20a4e301672251c
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 22 Feb 2019 05:57:54 +0000 (14:57 +0900)]
config: tizen_rpi: move env values from boot script to tizen_rpi.h
Some environment values are used with same value.
It can be moved to tizen_rpi header.
Change-Id: I679491fc03e0381df94025044e80e476f0953db2
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 20 Feb 2019 05:43:35 +0000 (14:43 +0900)]
configs: rpi: move from rpi to tizen_rpi about tizen specific config
Tizen specific configs can be located to tizen_rpi header.
It's more easier to maintain config relevant to tizen.
Change-Id: I6aff98fd9cc4ed1d812ba217c655ce5e0ea59035
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 19 Feb 2019 05:21:20 +0000 (14:21 +0900)]
config: tizen_rpi: add tizen_rpi header file for tizen
Add the tizen_rpi header file for tizen.
It can be included tizen specific configuration for rpi boards.
Someone wants to change loglevel, follow the below command :
U-Boot> edit opts
edit : loglevel=7
- Change the loglevel value what you want.
Change-Id: I60157dd380a447ce1757921810e0b942be3d2843
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Dongwoo Lee [Fri, 1 Feb 2019 04:44:54 +0000 (13:44 +0900)]
rpi: tizen-boot: rpi3: remove dhcp as default network configuration
If there is no ip setup on environmental variable, dhcp is used as
default. But, in this case, if dhcp server is not set on connected
network neither, kernel waits dhcp server for a long time (about 3
minutes). So this patch removes dhcp option. After this, tfm handles
unconfigured network.
Change-Id: I513503d2ba81b2342c42967fc1b8cb74f17ce215
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Dongwoo Lee [Wed, 12 Dec 2018 08:19:40 +0000 (17:19 +0900)]
rpi: tizen-boot: rpi3: pass network arguments on flash mode
To setup network environment for flash manager, this patch makes
passing parameters such as 'ipaddr', 'netmask', and 'gateway' through
kernel bootcmd.Those parameters can be assigned by user-self before
using flash mode.
Change-Id: Ifda261598978b4cc985fe43e2e612fd58c49fdd1
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Jaehoon Chung [Mon, 17 Dec 2018 22:57:02 +0000 (07:57 +0900)]
samsung: platform_boot: increase space for kernel from 8MiB to 16MiB
This patch is based on "samsung: common: increase space for kernel from
8MiB to 16MiB".
Tizen is using platform_boot header file, not autocmd.cmd.
Change-Id: I5d245a51bf975d4a1ca51f6dbf6dba1ab8ef72fd
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Marek Szyprowski [Thu, 13 Dec 2018 12:53:08 +0000 (13:53 +0100)]
samsung: common: increase space for kernel from 8MiB to 16MiB
v4.14 kernel for Odroid easily exceeds 8MiB, thus loading kernel with the
default configuration corrupts previously loaded dtb. Increase ${fdtaddr}
to 0x41000000 to avoid this issue, what gives about 16MiB space for kernel.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I33e897d259f4428602fdd476db3cc0adf700f33c
Jaehoon Chung [Mon, 12 Nov 2018 02:27:09 +0000 (11:27 +0900)]
packaging: added a comment how to build with gbs for rpi3
Added a comment how to build with gbs for rpi3.
If there is no comment for this, it's difficult to know how to make
u-boot image with gbs system.
(There is dependent on arm-trusted-firmware-rpi3 repository.)
Change-Id: Iee14253dd011c171104273d7285fff969e68e077
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Fri, 5 Oct 2018 08:14:51 +0000 (17:14 +0900)]
scripts: sd_fusing_xu4: remove not necessary tmp variable and comment
Remove not necessary tmp variable and comment.
Note: it is partial revert of the commit
e560d71f0d64 ("scripts:
odroid-xu4: add ramdisk.img flashing support") to flash ramdisk.img
at the last time. Almost all of revert is done with the commit
de355221bf93 ("scripts: sd_fusing_xu4: add the ramdisk partition")
but there was remaining variable and comment.
Change-Id: I1b28fa8ab5852fefa1d83b68b498e89ddafe5660
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Mon, 1 Oct 2018 04:05:49 +0000 (13:05 +0900)]
scripts: sd_fusing_xu4: add the ramdisk partition
Add the ramdisk partition as number 7.
Change-Id: Ie3a833bbe85fe27e0f751a426e09f8e4616fd09b
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 1 Oct 2018 04:00:43 +0000 (13:00 +0900)]
board: samsung: exynos5-dt: modify the get_dfu_alt_system information
If there is a partition7, set to dfu_alt_system_2.
Otherwise, just use the dfu_alt_system.
(It's relevant to thor download.)
- change from getenv() to env_get().
Change-Id: I1ff7b5a6c97ad7eed2b6cd489260cfdc902c2a73
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 1 Oct 2018 03:55:57 +0000 (12:55 +0900)]
config: odroid-xu3: add dfu_alt_system information version 2
Add the dfu_alt_system information version 2.
It's used to flash a ramdisk.img at partition 7.
If there is no partition 7, it will load from mmcbootpart as mmcblk0p1.
Change-Id: I2830a950ab87e80c66e4d5dc134c12523011252e
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Fri, 21 Sep 2018 07:59:42 +0000 (16:59 +0900)]
scripts: tizen: change modules parition size as 32MB
Currently, odroid boot image has 20MB modules.img and exact 20MB
modules partition size causes thor flash failure because it is in
extended parition. Change modules partition size as 32MB.
Change-Id: I1c383f359acf3d415c823ff991901a55e647dfd6
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Thu, 20 Sep 2018 06:50:03 +0000 (15:50 +0900)]
rpi: tizen-boot: rpi3/rpi3-32b: add dwc_otg option like raspbian cmdline
From raspbian cmdline.txt, from kernel related otpion, there is
dwc_otg.lpm_enable=0 which is not in Tizen u-boot booting script.
Add dwc_otg option line raspbian.
Change-Id: I37a723f63bae288f9d9d3e0b88adca01398f3c22
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 12 Sep 2018 04:28:26 +0000 (13:28 +0900)]
config: rpi3: update dtb file names in dfu_alt_info
There are wrong dtb file names. Update the wrong dtb file names
and add rpi 3 b plus model dtb.
Change-Id: I61f8833c08443ad8514b6f3bd785653baf609960
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 3 Sep 2018 02:48:13 +0000 (11:48 +0900)]
rpi: tizen-boot: rpi3/rpi3-32b: set dt filename by its model
To identify rpi3 b model and rpi3 b+ model, set dt filename by
its model.
Note: Tizen uses raspbian vendor kernel, so raspbian dt name is
used instead of mainline file name set by booting.
Change-Id: I84dc4a38e5f21527912749eee28d784245123340
Reference:
7fe77226aa29 ("rpi: Add identifier for the new RPi3 B+")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Thu, 10 May 2018 04:13:00 +0000 (13:13 +0900)]
rpi: tizen-boot: rpi2: Add boot param for support flash mode
This patch adds support for flash bootmode. If boot-param.bin is
set to 'dwnl', bootmode will be set to flash to invoke flash-init.
Change-Id: I17bda3435176c992d9b457bec14f5aded804f0dc
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Thu, 10 May 2018 04:13:00 +0000 (13:13 +0900)]
rpi: tizen-boot: rpi3-32b: Add boot param for support flash mode
This patch adds support for flash bootmode. If boot-param.bin is
set to 'dwnl', bootmode will be set to flash to invoke flash-init.
Change-Id: I41955d2b2dd08edd23897df4e458ca8f59eaf9a5
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Dongwoo Lee [Thu, 5 Apr 2018 05:40:01 +0000 (14:40 +0900)]
rpi: tizen-boot: Add boot parameter for support flash mode
This patch adds support for flash bootmode. If boot-param.bin is set
to 'dwnl', bootmode will be set to flash to invoke flash-init.
Change-Id: I5fe1554c4ad431f6275c0118d25a36e1f3a8ffc4
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Seung-Woo Kim [Tue, 8 May 2018 05:41:32 +0000 (14:41 +0900)]
rpi: tizen-boot: rpi2: set console in cmdline as u-boot environment
The console in cmdline will be used by kernel as printk console
and tizen-boot script always sets console with UART device. Set
console in cmdline as u-boot environment value console and set
default uart if nothing is set.
Change-Id: I36f58c0532e0a10efb7844c14caeb21258c9b792
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 8 May 2018 05:39:09 +0000 (14:39 +0900)]
rpi: tizen-boot: rpi3: set console in cmdline as u-boot environment
The console in cmdline will be used by kernel as printk console
and tizen-boot script always sets console with UART device. Set
console in cmdline as u-boot environment value console and set
default uart if nothing is set.
Change-Id: I0d2743d445de8c8cf4bd43600fbc8c28a07cd0ea
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Mon, 25 Feb 2019 10:57:16 +0000 (19:57 +0900)]
packaging: spec: update u-boot version to v2019.01
Update u-boot version to v2019.01.
- This branch is based on sandbox/jaehoon/rebase-v2018.03.
Change-Id: I100e24eaa361f61b66d3b81e6529e9790c6786b4
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 25 Feb 2019 10:38:09 +0000 (19:38 +0900)]
usb: gadget: f_thor: fix wrong type format
Fix wrong type format about buidling wanring.
Change-Id: I161651ffa9427611ef4e095bebca095d6bbf153d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 21 Feb 2019 11:05:45 +0000 (20:05 +0900)]
configs: rpi3: remove redfined configuration
Remove redefined configuration.
Change-Id: If74ca366e22290714ade37763f93a39544aa4ee1
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Mon, 8 Oct 2018 09:08:18 +0000 (18:08 +0900)]
configs: rpi3: move CONFIG_SPL_DRIVERS_MISC_SUPPORT option
Move CONFIG_SPL_DRIVERS_MISC_SUPPORT option configs/rpi_3_defconfig
because the option is not in scripts/config_whitelist.txt.
Change-Id: Ia883f5521430a915943dbf00c8043cea6deec1ad
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Fri, 29 Jun 2018 09:35:42 +0000 (18:35 +0900)]
configs: rpi3: enable CONFIG_SPL_ATF configuration
Enable CONFIG_SPL_ATF config and defined ATF_TEXT_BASE in configs/rpi.h.
Change-Id: I24f2115b6386232fb53eb105dcbeffd3495fb55e
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 29 Jun 2018 06:44:38 +0000 (15:44 +0900)]
gpio: bcm2835: remove the unnecessary CONFIG_SPL_BUILD ifdef
Remove the unnecessary CONFIG_SPL_BUILD ifdef.
Change-Id: I6509cecadf17e1daa9c938a4611a1a703cffb373
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 29 Jun 2018 06:35:12 +0000 (15:35 +0900)]
serial: bcm283x: remove the CONFIG_SPL_BUILD ifdef
Remove the CONFIG_SPL_BUILD ifdef to use the pinctrl.
Change-Id: I0685b7fbd15896e991bdb3c68e79554bde67c57f
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 29 Jun 2018 05:58:10 +0000 (14:58 +0900)]
configs: rpi3: enable the SPL_PINCTRL config
Enable the SPL_PINCTRL configuration to control the pinctrl.
Change-Id: Ie1dfb37c3d27b33f894521dd2ae5907f78bcccdb
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 29 Jun 2018 05:28:07 +0000 (14:28 +0900)]
configs: rpi3: move the SPL_BOARD_INIT into defconfig
Move the SPL_BOARD_INIT configuration into defconfig.
Change-Id: I81b10c1224a0725b78d478bd252a1a9f8735532a
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Mon, 4 Jun 2018 07:04:51 +0000 (16:04 +0900)]
cmd: add missing line breaks for pr_err()
After the commit
9b643e312d52 ("treewide: replace with error() with
pr_err()"), there are some pr_err() with no line break. Add missing
line breaks.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
[sw0312.kim: cherry-pick from mainline to fix error log]
Change-Id: I8aa616cb4c1e6d4ab250ba89cb75214f33488a6f
Seung-Woo Kim [Fri, 25 May 2018 05:21:01 +0000 (14:21 +0900)]
gadget: f_thor: Fix memory leaks of usb request and its buffer
There are memory leaks of usb request and its buffer for ep0,
in_ep, and out ep. Fix memory leaks of usb request and its buffer.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
[sw0312.kim: fix conflict about int_ep from thor_eps_setup()]
Change-Id: I606d039d53847d0e0850c5bcbceca451bdbb1c02
Jaehoon Chung [Tue, 8 May 2018 10:57:15 +0000 (19:57 +0900)]
packaging: change from 'env' to 'envtools' for building envtool
Change a name from "env" to "envtools" for building envtools.
(Fix the compile error during obs/gbs system.)
Change-Id: I5717142528d88993134f1219dba2bb0a7e928efe
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 8 May 2018 10:09:20 +0000 (19:09 +0900)]
packaging: change from env_common to built-in for generating param.bin
environemnt codes had moved to env directory from common.
It's changed to get the default environment from build-in.o.
Change-Id: I15f8c0115fab426ed35547e0063d3361385d1712
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 8 May 2018 02:28:06 +0000 (11:28 +0900)]
configs: tizen: remove the unused configurations
Remove the unused configurations.
(CONFIG_UHB_HCI is replaced to CONFIG_USB_EHCI_HCD.)
Change-Id: I132d04517193544523230429dd6d373725ea32f2
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Tue, 8 May 2018 02:09:20 +0000 (11:09 +0900)]
rpi3: fix the spl build error
Fix the spl build error.
This is a workaround for building a rpi3 spl image.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 3 May 2018 12:09:10 +0000 (21:09 +0900)]
packaging: change the version infomation from 2017.03 to 2018.03
Upadte the U-boot version information to v2018.03.
Change-Id: I357b173a68f80b9879e2e9acc9c665df30e7e9d9
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 3 May 2018 11:56:46 +0000 (20:56 +0900)]
configs: rpi: remove the CONFIG_SPL_FRAMEWORK
Remove the CONFIG_SPL_FRAMEWORK config in include/configs/rpi.h.
Change-Id: Iff3f2740ddaaa4be16766e66cea29eca140dee02
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 3 May 2018 11:54:22 +0000 (20:54 +0900)]
cmd: nfsdown: support the nfsdown when CONFIG_BLK is enabled
If CONFIG_BLK is enabled, it means that device driver is using the
driver-model.
Change-Id: I235deb6208c558a6584560e1638d05f93ac795aa
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 3 May 2018 07:22:20 +0000 (16:22 +0900)]
Revert "bootstage: Require timer_get_boot_us() to be defined"
This reverts commit
c87dc38d8f860710f5f624d9dae6cefded285b8d.
(This revert is workaround.)
Change-Id: I8febf78aa41f1124775359278380fbb35d9dcc4b
Jaehoon Chung [Wed, 2 May 2018 11:16:24 +0000 (20:16 +0900)]
configs: remove the duplicated configurations
Remove the duplicated configurations.
It needs to define the CONGIT_SYS_TEXT_BASE in configs/tizen_defconfig.
Change-Id: I77137e03580020e211d3286fac8d8da6f82829b0
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 3 May 2018 04:05:48 +0000 (13:05 +0900)]
configs: tizen: enable the CONFIG_USB_EHCI_HCD config
Enable the CONFIG_USB_EHCI_HCD config.
Change-Id: Id51d97fac39a180eebc871f57a04dc8a71795afc
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 3 May 2018 02:41:52 +0000 (11:41 +0900)]
board: samsung: fix the compile error with tizen_defconfig
Fix the compile error during rebase on v2018.03.
Change-Id: I6207c86b495cb064591bd6d9dec8a0ef1ef527e9
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 12 Feb 2018 06:08:18 +0000 (15:08 +0900)]
configs: rpi_3: enable the CMD_TIME configuration
To check the time, enable the CMD_TIME configuration.
Change-Id: I4be99bf8b311bf55e6ecf1d74e8d67f47bea8847
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 12 Feb 2018 05:47:19 +0000 (14:47 +0900)]
config: rpi3: enable the configurations relevant to NFSDOWN
Enable the configurations relevant to nfsdown command for rpi3.
Change-Id: Ic050057e75f4e92b1507ca84c642ba3c798ba6fc
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 12 Feb 2018 05:48:28 +0000 (14:48 +0900)]
cmd: nfsdown: add the update_image_names for rpi3
RPi3 has the names of different file with other exynos boards.
Add the update_image_names for rpi3.
Change-Id: I133f8eb65279629b912aab3715101b46cbf16b4d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Tue, 23 Jan 2018 01:34:57 +0000 (10:34 +0900)]
rpi: tizen-boot: add rpi2 script
Add rpi2 tizen-boot script.
For rpi2, serial console is different from rpi3.
Change-Id: I4548468a3c052361b389be0fb6bdee72187b5e33
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 23 Jan 2018 01:31:45 +0000 (10:31 +0900)]
rpi: tizen-boot: add rpi3 32bit script
Add rpi3 32bit tizen-boot script.
For 32bit, kernel dt image should be loaded to $fdt_addr instead of
$fdt_addr_r and kernel image name is zImage instead of Image. Also,
boot command should be bootz instead of booti.
Change-Id: Ia7a942837dd7a9ed398567f82aa89a81784a7591
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 23 Jan 2018 01:24:23 +0000 (10:24 +0900)]
rpi: tizen-boot: Rename tizen-boot script for rpi3
The tizen-boot script is for rpi3 64bit mode. Rename the script for
rpi3 to support other rpi board family.
Change-Id: Ic05c2bf94deb9381460c0de4e4a31a31c8f615b6
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 15 Jan 2018 07:48:21 +0000 (16:48 +0900)]
rpi: tizen-boot: add note about kernel size limitation.
There is kernel size limitation to support ramdisk. Add note
about the size limitation.
Change-Id: I77366008ee2a3649b9d9c366c756206784c240cb
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Thu, 11 Jan 2018 04:54:20 +0000 (13:54 +0900)]
rpi: tizen-boot: change the kernel loading address
Tizen kernel image can be over than 16MB.
It should be overlapped with other image address.
To avoid this behavior, change to 0x02d00000 from 0x01000000.
Change-Id: I8cf142c55d6afedd1186f58181251df39d1e9cc5
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Thu, 11 Jan 2018 03:51:51 +0000 (12:51 +0900)]
scripts: tizen: call sync before umount
After writing files on mounted directory, umount can fail with busy
state. Call sync before umount to clear the busy state instead of
sleep.
Change-Id: I7985ab3688a64b072c9a992957acdf124f925a34
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 9 Jan 2018 05:39:57 +0000 (14:39 +0900)]
rpi: tizen-boot: Add earlycon option to bootargs
Add earlycon option to show early uart message. Also, remove
unnecessary earlyprintk option in bootargs.
Change-Id: Ie0d88914b7ee5bbd2bf7a67db37b772b1a937454
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Mon, 6 Nov 2017 10:41:58 +0000 (19:41 +0900)]
arm: bcm283x: bcm283x-board-spl: display the SPL version
Remove the unuseful log message.
Instead, display the SPL version for providing the build information.
Change-Id: Ibe877ec03fb73a5c0027c3db579344d839d19acc
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Fri, 3 Nov 2017 09:33:39 +0000 (18:33 +0900)]
spl: serial_bcm283x: remove unnecessary gpio setting
The config.txt has enable_uart=1 option, so bootcode.bin will set
register to enable uart, so spl of rpi3 does not need to set uart
register. Remove the unnecessary setting to remove garbage in uart
rx.
This fixes unexpected hang-up on u-boot prompt without connection
uart to serial console.
Change-Id: I813b4304e434c0f3d51d06078b38d09adb7b993d
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Thu, 2 Nov 2017 07:08:18 +0000 (16:08 +0900)]
Revert "spl: serial_bcm283x: set GPIO before enabling uart to remove rx"
This reverts commit
d1dac2248ae24ba833069679734f966f0e481b5a.
The commit fixes hang on u-boot console with serial connection, but
it blocks all serial rx communication, so it is not possible to send
any command via uart. So reverting it and the original issue will be
handled later.
Change-Id: I216375c8bbfcbd47b960182bfcd79d452d32e1f8
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
r.tyminski [Mon, 30 Oct 2017 11:56:18 +0000 (12:56 +0100)]
spl: serial_bcm283x: set GPIO before enabling uart to remove rx
There was some garbage on uart input during boot, so if uart wasn't
connected, we end up in u-boot command line.
Set GPIO before enabling uart to remove uart Rx setup and this makes
SPL use only Tx.
Note: Chip documentation warns that order of commands is important.
Change-Id: I896d8b719c7b9170ad481767f8b27835d81f4af1
Signed-off-by: Rafal Tyminski <r.tyminski@partner.samsung.com>
[sw0312.kim: adjust commit-msg]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 17 Oct 2017 10:12:15 +0000 (19:12 +0900)]
configs: odroid_xu3: add missing CONFIG_MMC_DEFAULT_DEV
For dfu/thordown command, default mmc device number should be set
as CONFIG_MMC_DEFAULT_DEV. Add the missing CONFIG_MMC_DEFAULT_DEV.
Note: before this patch, CONFIG_MMC_DEFAULT_DEV string itself is
used for parsing mmc device number and anyway it was parsed as 0.
Change-Id: I233c59f810acf37ace57abed99f30c1897595d2b
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Marek Szyprowski [Fri, 29 Sep 2017 11:49:31 +0000 (13:49 +0200)]
configs: odroid-xu3: remove bootstage support
Bootstage slows down boot and sometimes shows message "bootstage: Failed
to add to device tree", which confuses users.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I1134f440d006506ab9fbdc4cbc1cddb61eb31c6c
Łukasz Stelmach [Mon, 16 Oct 2017 08:43:12 +0000 (10:43 +0200)]
rpi: support flashing an image of the INFORM partition
Change-Id: I3a48b84454eccc1b5382f47930d40fd55f67ac6d
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Łukasz Stelmach [Tue, 10 Oct 2017 11:11:54 +0000 (13:11 +0200)]
rpi: Read the value of RSTS register
RSTS register allows passing information from OS too bootloader upon
reboot.
Change-Id: I2fa04fa0e63e5c81f78901c06ca8884f7e89f8e8
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Łukasz Stelmach [Thu, 21 Sep 2017 08:20:38 +0000 (10:20 +0200)]
rpi: tizen-boot: enable runtime customisation of bootargs with ${opts}
Facilitate development of kernel and low level system components, by
making it easier for developers to add kernel command line arguments
via the ${opts} u-boot environment variable.
Change-Id: I4883cc5d29e4edaaa9ed17a3801808672ad66661
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Jaehoon Chung [Fri, 22 Sep 2017 15:48:47 +0000 (00:48 +0900)]
rpi: tizen-boot: remove the ramdiskdev variable
'ramdiskdev' can be replaced to 'mmcrootdev'.
It should be used the same device.
Change-Id: I9951f955e591a9761fba537b282fa4748d5dc2f5
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Junghoon Kim [Thu, 14 Sep 2017 11:57:24 +0000 (20:57 +0900)]
rpi: tizen-boot: modify the parameter check logic
Modify the parameter check logic to support all cases of reboot commands
including "reboot", "reboot fota", "reboot recovery", and undefined reboot
parameter.
Change-Id: I00c7cec03bdd8d9364bda3e8c7142a76ed9b4bd9
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
egukim [Tue, 12 Sep 2017 08:33:00 +0000 (17:33 +0900)]
packaging: add spl-atf and u-boot raw files
Add spl-atf file, u-boot-spl.bin and u-boot raw files including
fit_spl_atf.its, u-boot-nodtb.bin, and bcm2873-rpi-3-b.dtb.
To make fit style image from fit_spl_atf.its, it should run mkimage
with proper optee.bin.
In Tizen RPI 3 image case, this will be done from mic kickstarter.
Change-Id: Ie0ec56b211c198af57da10b971a90ffb2acb9c52
Signed-off-by: egukim <egukim@dignsys.com>
egukim [Mon, 4 Sep 2017 06:37:09 +0000 (15:37 +0900)]
ARM: bcm283x: apply SUPPORT_SPL
apply SUPPORT_SPL to support spl loading atf on raspberry pi 3
with bcm2835.
Change-Id: I200a2a7673db5eceaf94abb4c68377a1912e00cb
Signed-off-by: egukim <egukim@dignsys.com>
egukim [Mon, 4 Sep 2017 05:25:30 +0000 (14:25 +0900)]
spl: implement spl-atf on raspberry 3 b
add implementation of spl-atf on raspberry 3 b board to support
atf optee secure world.
To execute u-boot-spl.bin, it should append built binary from
head.S to u-boot-spl.bin as binary header.
Change-Id: I74883a9e7d7476f9f814660b74a5e68d953aff1b
Signed-off-by: egukim <egukim@dignsys.com>
Jaehoon Chung [Wed, 30 Aug 2017 08:39:04 +0000 (17:39 +0900)]
rpi3: tizen-boot: Add the ethernet macaddr
Add the smsc95xx.macaddr for using the unique macaddr.
Change-Id: I5d74c2d44372ca19d4776c3dd12504f888500748
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Wed, 23 Aug 2017 09:22:22 +0000 (18:22 +0900)]
rpi3: tizen-boot: remove duplicated kernel image loading
There are unnecessary duplicated kernel image loading steps in
tizen-boot script. Remove the duplicated loading.
Change-Id: I9f6b98f870dcfb5503513e3ca481335531fc0b96
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Fri, 11 Aug 2017 13:23:16 +0000 (22:23 +0900)]
rpi3: tizen-boot: Disable to display the log from HDMI
"console=tty1" is provided that displayed the log from HDMI.
After finishing the kernel booting, it should not be displayed from HDMI.
(when applied this patch.)
There is no requirement about using HDMI serial log.
Disable the log from HDMI.
Change-Id: I7c6576ba15f6a183ab8c82ca5b2114f9cc1e604c
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 8 Aug 2017 06:14:03 +0000 (15:14 +0900)]
rpi: tizen-boot: add the 'ramdisksize' as 12MB for ramdisk-recovery
Size of Ramdisk-recovery is 12MB.
It needs to load the 12MB, not 8MB.
Add the 'ramdisksize' as 12MB for ramdisk-recovery.
Change-Id: Idc9111a5b0d7ef150376ee241d39129e114ce368
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 7 Aug 2017 07:22:50 +0000 (16:22 +0900)]
configs: tizen: enable the CONFIG_NET_RANDOM_ETHADDR
To use the random macaddr, enable the CONFIG_NET_RANDOM_ETHADDR in
tizeh.h.
In future, it needs to move into configs/tizen_defconfig.
Change-Id: I47ef585a78b06f0ac334fc52e4400140392231cc
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Thu, 3 Aug 2017 09:38:13 +0000 (18:38 +0900)]
cmd: usbdown: fix build error without CONFIG_SET_DFU_ALT_INFO
If CONFIG_SET_DFU_ALT_INFO is not set, there is build error. Fix
the build error with moving dfu related variables and macros to
inside of the config defined area.
Change-Id: Ife977d8cc4da8e3d84a53c8e9cb27280e80d1464
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 2 Aug 2017 10:26:56 +0000 (19:26 +0900)]
tizen: enable nfsdown command support
Enable nfsdown command support for odroid-u3.
Change-Id: I395ee791ed4da7ed75f84d4357949641622f2148
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 2 Aug 2017 10:21:46 +0000 (19:21 +0900)]
tizen: enable usb host ethernet support
Enable usb host ethernet support from tizen config for odroid-u3.
NOTE: to use ethernet card on odroid-u3, it is required to set
usbethaddr on u-boot env.
Change-Id: Ic92f74b45c291ba61efd6630450f050ed3a6909c
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 2 Aug 2017 10:13:41 +0000 (19:13 +0900)]
tizen: add default dfu macro for nfsdown
The nfsdown without CONFIG_DFU_ALT_SYSTEM causes build error.
Add default dfu macro, CONFIG_DFU_ALT_SYSTEM to tizen.h to support
nfsdown on odroid-u3 family boards.
Change-Id: I716b9235f1b40f4d3b0b19a75ccf67e73375acea
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 2 Aug 2017 10:09:53 +0000 (19:09 +0900)]
cmd: nfsdown: add image file name as optional argument
The nfsdown command takes too much time because it tries to get
all possible image files. Add image file name as optional argument.
With the optional argument, nfsdown command will get only the file
and it reduces time consumption for case of flashing one file.
Change-Id: If2995d128c219d100074153ba00be3f4dc5ee1e6
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 2 Aug 2017 10:04:23 +0000 (19:04 +0900)]
cmd: nfsdown: fix memory corruption with global memory free
Calling free() for result of getenv() causes memory corruption
because getenv() returns global memory area. Fix the corruption
with copying result of getenv() because parsing it with strtok()
changes the string.
Change-Id: I21374e7d622b603de9f8d3d036561d00b1e26c23
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 2 Aug 2017 09:34:08 +0000 (18:34 +0900)]
cmd: nfsdown: update usage description
The nfsdown has optional argument part for server ip address and
precondition to use nfs command but it is not described from command
usage. Update nfsdown usage description with required steps and
optional argument part.
Change-Id: I16e941ef386e1301f4e1581956e1b0b06dc33246
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Thu, 3 Aug 2017 07:47:23 +0000 (16:47 +0900)]
scripts: sd_fusing_rpi3: add the sleep before umounting
When umounting "mnt_tmp", it's appeared "device is busy".
To ensure the unmounting, add the "sleep 1" before unmounting.
Change-Id: Ibab0700f7ef112591576b53c5706b8f850821742
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Junghoon Kim [Tue, 25 Jul 2017 06:36:18 +0000 (15:36 +0900)]
rpi: tizen-boot: check reboot parameter to determine booting mode
The "reboot-param.bin" file is used for passing reboot parameter. For
example, the word "upgr" means that target should be booted with upgrade
mode.
Check the contents of "reboot-param.bin" file to determine booting mode.
Change-Id: I62a6598f84c677c251df3559da9dd58a545e859c
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Junghoon Kim [Wed, 26 Jul 2017 05:22:33 +0000 (14:22 +0900)]
scripts: sd_fusing_rpi3.sh: add inform partition support
To implement Tizen upgrade solution, reboot parameter should be
delivered into u-boot so that u-boot can jump to proper partition. But,
new SoC on RPI3 does not support any specific registers (e.g., INFORM
register of Exynos) to store reboot parameter upon SW reset.
Add inform partition and make "reboot-param.bin" file for passing reboot
parameter.
Change-Id: Ic98df1b4ad4aeab9152d3ad5007b97a0e20d8be7
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Seung-Woo Kim [Wed, 26 Jul 2017 02:18:55 +0000 (11:18 +0900)]
tizen: add default dfu macros
There is CONFIG_SET_DFU_ALT_INFO, but CONFIG_DFU_ALT_BOOT_EMMC is not
set, and it causes build error for usbdown and nfsdown commands.
Add default dfu macros, CONFIG_DFU_ALT_BOOT_EMMC and
CONFIG_DFU_ALT_BOOT_SD to tizen.h which is used odroid-u3 family and
trats2 boards.
The usbdown and nfsdown commands are only possible on odroid-u3
family boards, so default dfu macros are set as odroid dfu macro.
Change-Id: Ic6ea1549492a073b6434e20f7ffcf329475f6670
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 26 Jul 2017 01:53:06 +0000 (10:53 +0900)]
exynos4-dt: fix build error caused by rebase
There are build errors, caused by rebase, with not defiend macro and
not matched function definition with specific config options.
Replace with proper macro and add proper build macro check for pmic
fuinctions to fix the build errors.
Change-Id: Id5e2cf5b87681af22cc362c67262545457130280
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 25 Jul 2017 05:29:47 +0000 (14:29 +0900)]
cmd: usbdown: use full path of loaded file for writing fat part
The update command to FAT partition has wrong file load command
with file name without path which causes reading failure always.
Use full path of loaded file instead of file name for the case
of writing fat partition.
Change-Id: Iee12f440bd4539c5c7a2ec8d197f067ce1fe34d3
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 25 Jul 2017 05:20:23 +0000 (14:20 +0900)]
cmd: usbdown: handle error of file load command during update
The error of file load command from usb storage during update command
is not handled, so wrong data is stored in the file for the case.
Handle error of file load command during update not to store
bad file.
Change-Id: I4c7338eaea538e656ef52ce8c7214f71d0089b4a
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Tue, 25 Jul 2017 06:30:02 +0000 (15:30 +0900)]
cmd: usbdown: remove memory leak on usbdown_get_alt()
The string name_bkp is duplicated but never deallocated and it
causes memory leak. Remove the memory leak on usb_don_get_alt()
with adding goto label 'out' which calls free.
Change-Id: Iae5a111c3ca4e6e81526374daa06e8be1f6de252
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Thu, 27 Jul 2017 03:13:22 +0000 (12:13 +0900)]
cmd: usbdown: remove overflow possiblity on fill_entity_usbdown()
The file name parsed from dfu_alo_info can be longer than NAME_SIZE,
so strcpy function has possiblity of overflow.
Remove the possible overflow using strncpy with less length than
NAME_SIZE.
Change-Id: Ib70f539a810e553136421c7faa576144811c3112
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Junghoon Kim [Wed, 26 Jul 2017 05:18:49 +0000 (14:18 +0900)]
scripts: sd_fusing_rpi3.sh: fix typo in ramdisk-recovery partition
Fix typo in ramdisk-recovery partition description.
Change-Id: Iaecd73bd2443ed30484159d69f9b90e44ea8966b
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Jaehoon Chung [Tue, 25 Jul 2017 02:02:04 +0000 (11:02 +0900)]
scripts: tizen: move the fusing scripts to tizen directory
Move the tizen specific scripts to tizen directory.
Change-Id: I50f004ac078cd7f610e78d668acc94f2aa6b5e0e
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 25 Jul 2017 01:59:18 +0000 (10:59 +0900)]
scripts: rpi3: add the fusing script for rpi3
Add the fusing script for rpi3.
Move from kernel git repository to u-boot repository.
Change-Id: I12d83aa9f5347fb07b4e4bd04471fa800cea9e8d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Wed, 19 Jul 2017 05:03:57 +0000 (14:03 +0900)]
cmd: usbdown: add ramdisk.img file
For Tizen 4.0, new ramdisk.img file is added but usbdown command
does not support the file. So add ramdisk.img into usbdown file
list.
Change-Id: Ib3d4a17e34ca9c1089923c80c448fc929e8d437c
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>