net: dsa: sja1105: allow SGMII PCS configuration to be per port

The SJA1105 R and S switches have 1 SGMII port (port 4). Because there
is only one such port, there is no "port" parameter in the configuration
code for the SGMII PCS.

However, the SJA1110 can have up to 4 SGMII ports, each with its own
SGMII register map. So we need to generalize the logic.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: sja1105: be compatible with "ethernet-ports" OF node name

Since commit f2f3e09396be ("net: dsa: sja1105: be compatible with
"ethernet-ports" OF node name"), DSA supports the "ethernet-ports" name
for the container node of the ports, but the sja1105 driver doesn't,
because it handles some device tree parsing of its own.

Add the second node name as a fallback.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnx2x: Remove the repeated declaration

Function 'bnx2x_vfpf_release' is declared twice, so remove the
repeated declaration.

Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Link: https://lore.kernel.org/r/1622449756-2627-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: align code with context

The Tab key is used three times, causing the code block to
be out of alignment with the context.

Signed-off-by: Rocco Yue <rocco.yue@mediatek.com>
Link: https://lore.kernel.org/r/20210530113811.8817-1-rocco.yue@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-sealevel-clean-up-some-code-style-issues'

Guangbin Huang says:

====================
net: sealevel: clean up some code style issues

This patchset clean up some code style issues.
====================

Link: https://lore.kernel.org/r/1622355874-18933-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: fix the alignment issue

Alignment should match open parenthesis.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: fix the comments style issue

Networking block comments don't use an empty /* line,
use /* Comment...

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

This patch fixes the comments style issues.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: remove meaningless comments

Remove the meaningless stylistically wrong comment.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: fix a code style issue about switch and case

According to the chackpatch.pl, switch and case should be
at the same indent.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: remove redundant initialization for statics

Should not initialise statics to false.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: add some required spaces

Add spaces required around that '='.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: open brace '{' following struct go on the same line

Fix the checkpatch error as open brace '{' following struct should
go on the same line.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: fix the code style issue about "foo* bar"

Fix the checkpatch error as "(foo*)" should be "(foo *)".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: add blank line after declarations

This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sealevel: remove redundant blank lines

This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: use prandom_u32() for ID generation

This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash
table for IP ID generation"), but focusing on some specific aspects
of IPv6.

Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a
minimum MTU of 1280, it's much less easy to force a remote peer to
produce many fragments to explore its ID sequence. In addition packet
IDs are 32-bit in IPv6, which further complicates their analysis. On
the other hand, it is often easier to choose among plenty of possible
source addresses and partially work around the bigger hash table the
commit above permits, which leaves IPv6 partially exposed to some
possibilities of remote analysis at the risk of weakening some
protocols like DNS if some IDs can be predicted with a good enough
probability.

Given the wide range of permitted IDs, the risk of collision is extremely
low so there's no need to rely on the positive increment algorithm that
is shared with the IPv4 code via ip_idents_reserve(). We have a fast
PRNG, so let's simply call prandom_u32() and be done with it.

Performance measurements at 10 Gbps couldn't show any difference with
the previous code, even when using a single core, because due to the
large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost
of the random generation is completely offset by other operations and by
the network transfer time. In addition, this change removes the need to
update a shared entry in the idents table so it may even end up being
slightly faster on large scale systems where this matters.

The risk of at least one collision here is about 1/80 million among
10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs,
which remains very low compared to IPv4 where all IDs are reused
every 4 to 80ms on a 10 Gbps flow depending on packet sizes.

Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210529110746.6796-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

virtio-net: Add validation for used length

This adds validation for used length (might come
from an untrusted device) to avoid data corruption
or loss.

Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210531135852.113-1-xieyongji@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: st95hf: fix indentation to tabs

Use tabs to indent instead of spaces. No functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073902.7111-7-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: st-nci: drop ftrace-like debugging messages

Now that the kernel has ftrace, any debugging calls that just do "made
it to this function!" and "leaving this function!" can be removed.
Better to use standard debugging tools.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073902.7111-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: st21nfca: drop ftrace-like debugging messages

Now that the kernel has ftrace, any debugging calls that just do "made
it to this function!" and "leaving this function!" can be removed.
Better to use standard debugging tools.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073902.7111-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: pn544: drop ftrace-like debugging messages

Now that the kernel has ftrace, any debugging calls that just do "made
it to this function!" and "leaving this function!" can be removed.
Better to use standard debugging tools.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073902.7111-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: pn533: drop unneeded braces {} in if

{} braces are not needed over single if-statement.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073902.7111-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: pn533: drop ftrace-like debugging messages

Now that the kernel has ftrace, any debugging calls that just do "made
it to this function!" and "leaving this function!" can be removed.
Better to use standard debugging tools.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073902.7111-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: mrvl: simplify with module_driver

Remove standard module init/exit boilerplate with module_driver() which
also annotates the functions with __init.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073902.7111-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: mrvl: correct minor coding style violations

Correct block comments and usage of tab in function definition.  No
functional change.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073522.6720-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: mrvl: use SPDX-License-Identifier

Use SPDX-License-Identifier: GPL-2.0-only, instead of hand writing it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073522.6720-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: mei_phy: drop ftrace-like debugging messages

Now that the kernel has ftrace, any debugging calls that just do "made
it to this function!" and "leaving this function!" can be removed.
Better to use standard debugging tools.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073522.6720-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: fdp: drop ftrace-like debugging messages

Now that the kernel has ftrace, any debugging calls that just do "made
it to this function!" and "leaving this function!" can be removed.
Better to use standard debugging tools.

This allows also to remove several local variables and entire
fdp_nci_recv_frame() function (whose purpose was only to log).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210531073522.6720-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fixes-for-yt8511-phy-driver'

Peter Geis says:

====================
fixes for yt8511 phy driver

The Intel clang bot caught a few uninitialized variables in the new
Motorcomm driver. While investigating the issue, it was found that the
driver would have unintended effects when used in an unsupported mode.

Fixed the uninitialized ret variable and abort loading the driver in
unsupported modes.
====================

Link: https://lore.kernel.org/r/20210529110556.202531-1-pgwipeout@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: abort loading yt8511 driver in unsupported modes

While investigating the clang `ge` uninitialized variable report, it was
discovered the default switch would have unintended consequences. Due to
the switch to __phy_modify, the driver would modify the ID values in the
default scenario.

Fix this by promoting the interface mode switch and aborting when the
mode is not a supported RGMII mode.

This prevents the `ge` and `fe` variables from ever being used
uninitialized.

Fixes: 48e8c6f1612b ("net: phy: add driver for Motorcomm yt8511 phy")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: fix yt8511 clang uninitialized variable warning

clang doesn't preinitialize variables. If phy_select_page failed and
returned an error, phy_restore_page would be called with `ret` being
uninitialized.
Even though phy_restore_page won't use `ret` in this scenario,
initialize `ret` to silence the warning.

Fixes: 48e8c6f1612b ("net: phy: add driver for Motorcomm yt8511 phy")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-dsa-qca8k-check-return-value-of-read-functions-correctly'

Yang Yingliang says:

====================
net: dsa: qca8k: check return value of read functions correctly

patch #1 - Change return type and add output parameter to make check
return value of read  functions correctly.

patch #2 - Add missing check return value in qca8k_phylink_mac_config().
====================

Link: https://lore.kernel.org/r/20210529030439.1723306-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: qca8k: add missing check return value in qca8k_phylink_mac_config()

Now we can check qca8k_read() return value correctly, so if
it fails, we need return directly.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: qca8k: check return value of read functions correctly

Current return type of qca8k_mii_read32() and qca8k_read() are
unsigned, it can't be negative, so the return value check is
unuseful. For check the return value correctly, change return
type of the read functions and add a output parameter to store
the read value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-pf: Fix fall-through warning for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210528202225.GA39855@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: axienet: Fix fall-through warning for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding a fallthrough statement instead of just
letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210528195831.GA39131@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'npc-kpu-updates'

George Cherian says:

====================
NPC KPU updates

Add support for
 - Loading Custom KPU profile entries
 - Add NPC profile Load from System Firmware DB
 - Add Support fo Coalescing KPU profiles
 - General Updates/Fixes to default KPU profile
====================

Link: https://lore.kernel.org/r/20210527094439.1910013-1-george.cherian@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: Update the default KPU profile and fixes

Add support for parsing following
 1. NGIO
 2. PPPOE
 3. 24 byte custom L2 header
 4. CPT Header
 5. Fragmented CPT packets
 6. VLAN EXDSA

Fix for
 1. EDSA VLAN parsing
 2. Enhance FDSA
 3. CPT Header parsing

Remove ITAG support

Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: support for coalescing KPU profiles

Adding support to load a new type of KPU image, known as coalesced/
consolidated KPU image via firmware database. This image is a
consolidation of multiple KPU profiles into a single image.

During kernel bootup this coalesced image will be read via
firmware database and only the relevant KPU profile will be loaded.
Existing functionality of loading single KPU/MKEX profile
is intact as the images are differentiated based on the image signature.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: adding new lt def registers support

CN10k introduces following new LT DEF registers:
1. APAD (alignment padding) LT DEF registers are
enhancement to existing apad calculation algorithm
where not just ipv4 and ipv6 but also other protocols
can be matched and required alignment can be added by NIX.

2. ET LT DEF register defines layer information in NPC_RESULT_S
to identify the Ethertype location in L2 header. Used for
Ethertype overwriting in inline IPsec flow.

This patch adds required structures and some header changes. Also
strict version check (based on minor field) is imposed to highlight
version mismatch between the kernel headers and KPU profile.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Jerin Jacob Kollanukkaran <jerinj@marvell.com>
Signed-off-by: Kiran Kumar Kokkilagadda <kirankumark@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: load NPC profile via firmware database

Currently NPC profile (KPU + MKEX) can be loaded using firmware
binary in filesystem scheme. Enhancing the functionality to load
NPC profile image from system firmware database. It uses the same
technique as used for loading MKEX profile. Firstly firmware binary
in kernel is checked for a valid image else tries to load NPC profile
from firmware database and at last uses default profile if no proper
image found.

Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

octeontx2-af: add support for custom KPU entries

Add ability to load a set of custom KPU entries. This
allows for flexible support for custom protocol parsing.

AF driver will attempt to load the profile and verify if it can fit
hardware capabilities. If not, it will revert to the built-in profile.

Next it will replace the first KPU_MAX_CST_LT (2) entries in each KPU
in default profile with entries read from the profile image.
The built-in profile should always contain KPU_MAX_CSR_LT first no-match
entries and AF driver will disable those in the KPU unless custom
profile is loaded.

Profile file contains also a list of default protocol overrides to
allow for custom protocols to be used there.

Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ehea: fix error return code in ehea_restart_qps()

Fix to return -EFAULT from the error handling case instead of 0, as done
elsewhere in this function.

By the way, when get_zeroed_page() fails, directly return -ENOMEM to
simplify code.

Fixes: 2c69448bbced ("ehea: DLPAR memory add fix")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210528085555.9390-1-thunder.leizhen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

r8169: Fix fall-through warning for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20210528202327.GA39994@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: the XPCS obscures a potential "PHY not found" error

stmmac_mdio_register() has logic to search for PHYs on the MDIO bus and
assign them IRQ lines, as well as to set priv->plat->phy_addr.

If no PHY is found, the "found" variable remains set to 0 and the
function errors out.

After the introduction of commit f213bbe8a9d6 ("net: stmmac: Integrate
it with DesignWare XPCS"), the "found" variable was immediately reused
for searching for a PCS on the same MDIO bus.

This can result in 2 types of potential problems (none of them seems to
be seen on the only Intel system that sets has_xpcs = true, otherwise it
would have been reported):

1. If a PCS is found but a PHY is not, then the code happily exits with
   no error. One might say "yes, but this is not possible, because
   of_mdiobus_register will probe a PHY for all MDIO addresses,
   including for the XPCS, so if an XPCS exists, then a PHY certainly
   exists too". Well, that is not true, see intel_mgbe_common_data():

/* Ensure mdio bus scan skips intel serdes and pcs-xpcs */
plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR;
plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR;

2. A PHY is found but an MDIO device with the XPCS PHY ID isn't, and in
   that case, the error message will be "No PHY found". Confusing.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210527155959.3270478-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: st95hf: mark ACPI and OF device ID tables as maybe unused

The driver can match either via OF or ACPI ID tables.  If one
configuration is disabled, the table will be unused:

    drivers/nfc/st95hf/core.c:1059:34: warning:
        ‘st95hf_spi_of_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-12-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: st21nfca: mark ACPI and OF device ID tables as maybe unused

The driver can match either via OF or ACPI ID tables.  If one
configuration is disabled, the table will be unused:

    drivers/nfc/st21nfca/i2c.c:593:34: warning:
        ‘of_st21nfca_i2c_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-11-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: st-nci: mark ACPI and OF device ID tables as maybe unused

The driver can match either via OF or ACPI ID tables.  If one
configuration is disabled, the table will be unused:

    drivers/nfc/st-nci/spi.c:296:34: warning:
        ‘of_st_nci_spi_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-10-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: pn544: mark ACPI and OF device ID tables as maybe unused

The driver can match either via OF or ACPI ID tables.  If one
configuration is disabled, the table will be unused:

    drivers/nfc/pn544/i2c.c:53:36: warning:
        ‘pn544_hci_i2c_acpi_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-9-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: s3fwrn5: mark OF device ID tables as maybe unused

The driver can match either via OF or I2C ID tables.  If OF is disabled,
the table will be unused:

    drivers/nfc/s3fwrn5/i2c.c:265:34: warning:
        ‘of_s3fwrn5_i2c_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-8-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: pn533: mark OF device ID tables as maybe unused

The driver can match either via OF or I2C ID tables.  If OF is disabled,
the table will be unused:

    drivers/nfc/pn533/i2c.c:252:34: warning:
        ‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-7-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: mrvl: skip impossible NCI_MAX_PAYLOAD_SIZE check

The nci_ctrl_hdr.plen field us u8, so checkign if it is bigger than
NCI_MAX_PAYLOAD_SIZE does not make any sense.  Fix warning reported by
Smatch:

    drivers/nfc/nfcmrvl/i2c.c:52 nfcmrvl_i2c_read() warn:
        impossible condition '(nci_hdr.plen > 255) => (0-255 > 255)'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: mrvl: mark OF device ID tables as maybe unused

The driver can match either via OF or I2C ID tables.  If OF is disabled,
the table will be unused:

    drivers/nfc/nfcmrvl/spi.c:199:34: warning:
        ‘of_nfcmrvl_spi_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: pn533: drop of_match_ptr from device ID table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here).  This
fixes compile warning (!CONFIG_OF):

    drivers/nfc/pn533/i2c.c:252:34: warning:
      ‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: port100: correct kerneldoc for structure

The port100_in_rf_setting structure does not contain valid kerneldoc
docummentation, unlike the port100_tg_rf_setting structure.  Correct the
kerneldoc to fix W=1 warnings:

    warning: This comment starts with '/**', but isn't a kernel-doc comment.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: fdp: drop ACPI_PTR from device ID table

The driver can match only via the ACPI ID table so the table should be
always used and the ACPI_PTR does not have any sense.  This fixes fixes
compile warning (!CONFIG_ACPI):

    drivers/nfc/fdp/i2c.c:362:36: warning:
        ‘fdp_nci_i2c_acpi_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

nfc: fdp: correct kerneldoc for structure

Since structure comments are not kerneldoc, remove the double ** to fix
W=1 warnings:

    warning: This comment starts with '/**', but isn't a kernel-doc comment.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

samples: pktgen: add UDP tx checksum support

Introduce k parameter in pktgen samples in order to toggle UDP tx
checksum

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/cf16417902062c6ea2fd3c79e00510e36a40c31a.1622210713.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-hdlc_fr-clean-up-some-code-style-issues'

Peng Li says:

====================
net: hdlc_fr: clean up some code style issues

V1 -> V2:
1, Use appropriate commit prefix suggested by Jakub Kicinski,
   replace commit prefix "net: wan" by "net: hdlc_fr".
====================

Link: https://lore.kernel.org/r/1622160769-6678-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: remove unnecessary out of memory message

This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: remove redundant braces {}

This patch removes redundant braces {}, to fix the
checkpatch.pl warning:
"braces {} are not necessary for any arm of this statement"

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: add braces {} to all arms of the statement

Braces {} should be used on all arms of this statement.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: remove space after '!'

According to the chackpatch.pl, space prohibited after that '!'.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: code indent use tabs where possible

Code indent should use tabs where possible.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: move out assignment in if condition

Should not use assignment in if condition.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: add some required spaces

Add spaces required after that close brace '}'.
Add spaces required before the open parenthesis '('.
Add spaces required after that ','.
Add spaces required around that '='.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: fix an code style issue about "foo* bar"

Fix the checkpatch error as "foo* bar" and should be "foo *bar",
and "(foo*)" should be "(foo *)".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: add blank line after declarations

This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hdlc_fr: remove redundant blank lines

This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mptcp-miscellaneous-cleanup'

Mat Martineau says:

====================
mptcp: Miscellaneous cleanup

Here are some cleanup patches we've collected in the MPTCP tree.

Patches 1-4 do some general tidying.

Patch 5 adds an explicit check at netlink command parsing time to
require a port number when the 'signal' flag is set, to catch the error
earlier.

Patches 6 & 7 fix up the MPTCP 'enabled' sysctl, enforcing it as a
boolean value, and ensuring that the !CONFIG_SYSCTL build still works
after the boolean change.
====================

Link: https://lore.kernel.org/r/20210527235430.183465-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: restrict values of 'enabled' sysctl

To avoid confusions, it seems better to parse this sysctl parameter as a
boolean. We use it as a boolean, no need to parse an integer and bring
confusions if we see a value different from 0 and 1, especially with
this parameter name: enabled.

It seems fine to do this modification because the default value is 1
(enabled). Then the only other interesting value to set is 0 (disabled).
All other values would not have changed the default behaviour.

Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: support SYSCTL only if enabled

Since the introduction of the sysctl support in MPTCP with
commit 784325e9f037 ("mptcp: new sysctl to control the activation per NS"),
we don't check CONFIG_SYSCTL.

Until now, that was not an issue: the register and unregister functions
were replaced by NO-OP one if SYSCTL was not enabled in the config. The
only thing we could have avoid is not to reserve memory for the table
but that's for the moment only a small table per net-ns.

But the following commit is going to use SYSCTL_ZERO and SYSCTL_ONE
which are not be defined if SYSCTL is not enabled in the config. This
causes 'undefined reference' errors from the linker.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: make sure flag signal is set when add addr with port

When add address with port, it is mean to create a listening socket,
and send an ADD_ADDR to remote, so it must have flag signal set,
add this check in mptcp_pm_parse_addr().

Fixes: a77e9179c7651 ("mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink")
Acked-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: remove redundant initialization in pm_nl_init_net()

Memory of struct pm_nl_pernet{} is allocated by kzalloc()
in setup_net()->ops_init(), so it's no need to reset counters
and zero bitmap in pm_nl_init_net().

Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: generate subflow hmac after mptcp_finish_join()

For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().

Fixes: ec3edaa7ca6c ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: using TOKEN_MAX_RETRIES instead of magic number

We have macro TOKEN_MAX_RETRIES for the number of token generate retries,
so using TOKEN_MAX_RETRIES in subflow_check_req().

And rename TOKEN_MAX_RETRIES to MPTCP_TOKEN_MAX_RETRIES as it is now
exposed.

Fixes: 535fb8152f31 ("mptcp: token: move retry to caller")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mptcp: fix pr_debug in mptcp_token_new_connect

After commit 2c5ebd001d4f ("mptcp: refactor token container"),
pr_debug() is called before mptcp_crypto_key_gen_sha() in
mptcp_token_new_connect(), so the output local_key, token and
idsn are 0, like:

  MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0

Move pr_debug() after mptcp_crypto_key_gen_sha().

Fixes: 2c5ebd001d4f ("mptcp: refactor token container")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mlx5-updates-2021-05-26' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2021-05-26

Misc update for mlx5 driver,

1) Clean up patches for lag and SF

2) Reserve bit 31 in steering register C1 for IPSec offload usage

3) Move steering tables pool logic into the steering core and
  increase the maximum table size to 2G entries when software steering
  is enabled.

* tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Fix lag port remapping logic
  net/mlx5: Use boolean arithmetic to evaluate roce_lag
  net/mlx5: Remove unnecessary spin lock protection
  net/mlx5: Cap the maximum flow group size to 16M entries
  net/mlx5: DR, Set max table size to 2G entries
  net/mlx5: Move chains ft pool to be used by all firmware steering
  net/mlx5: Move table size calculation to steering cmd layer
  net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE
  net/mlx5: DR, Remove unused field of send_ring struct
  net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling
  net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
  net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
  net/mlx5e: TC: Use bit counts for register mapping
  net/mlx5: CT: Avoid reusing modify header context for natted entries
  net/mlx5e: CT, Remove newline from ct_dbg call
====================

Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ixgbe: Fix out-bounds warning in ixgbe_host_interface_command()

Replace union with a couple of pointers in order to fix the following
out-of-bounds warning:

  CC [M]  drivers/net/ethernet/intel/ixgbe/ixgbe_common.o
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c: In function ‘ixgbe_host_interface_command’:
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3729:13: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 3729 |   bp->u32arr[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
      |   ~~~~~~~~~~^~~~
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3682:7: note: while referencing ‘u32arr’
 3682 |   u32 u32arr[1];
      |       ^~~~~~

This helps with the ongoing efforts to globally enable -Warray-bounds.

Link: https://github.com/KSPP/linux/issues/109
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210527173424.362456-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'add-4-rx-tx-queue-support-for-mikrotik-10-25g-nic'

Gatis Peisenieks says:

====================
add 4 RX/TX queue support for Mikrotik 10/25G NIC

More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance.
This patch set adds support for 4 RX/TX queues available on
Mikrotik 10/25G NIC.

v4:
    - addressed comments from Jakub Kicinski:
      - split up the change in more manageable chunks
      - changed member order in structs for tighter packing
      - fixed style issues
    - reverted to calling napi_alloc_skb only from within poll
      as before
v3:
    - fix kernel-doc complaints on comments as pointed out by
      David Miller
v2:
    - rebase on net-next master as requested by David Miller
====================

Link: https://lore.kernel.org/r/20210527144423.3395719-1-gatis@mikrotik.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NIC

More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance. The new
Mikrotik 10/25G NIC supports 4 RX and 4 TX queues. TX queues are
treated with equal priority. RX queue balancing is fixed based on
L2/L3/L4 hash.

This adds support for 4 RX/TX queues while maintaining backwards
compatibility with older hardware.

Simultaneous TX + RX performance on AMD Threadripper 3960X
with Mikrotik 10/25G NIC improved from 1.6Mpps to 3.2Mpps per port.

Backwards compatiblitiy was verified with AR8151 and AR8131 based
NICs.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

atl1c: prepare for multiple rx queues

Move napi and other per queue members into per rx queue struct.
Allocate max rx queues that any hw supported by the driver might have.
Patch that actually enables multiple rx queues will follow.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

atl1c: move tx napi into tpd_ring

To get more performance from using multiple tx queues one needs
a per tx queue napi.

Move tx napi from per adapter struct into per tx queue struct.
Patch that actually enables multiple tx queues will follow.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

atl1c: detect NIC type early

To support NICs that allow for more than one tx queue it is
required to detect NIC type early during probe. This is moves
NIC type detection before netdev_alloc to prepare for that.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'mlx-devlink-dev-info-versions-adjustments'

Jiri Pirko says:

====================
mlx*: devlink dev info versions adjustments

Couple of adjustments in Mellanox drivers regarding devlink dev
versions fill-up.
====================

Link: https://lore.kernel.org/r/20210526104509.761807-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: core: use PSID string define in devlink info

Instead of having the string spelled out in the driver, use the global
define with the same value.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mlxsw: core: Expose FW version over defined keyword

To be aligned with the rest of the drivers, expose FW version under "fw"
keyword in devlink dev info, in addition to the existing "fw.version",
which is currently Mellanox-specific.

devlink output before:
       running:
         fw.version 30.2008.2018
after:
       running:
         fw.version 30.2008.2018
         fw 30.2008.2018

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Expose FW version over defined keyword

To be aligned with the rest of the drivers, expose FW version under "fw"
keyword in devlink dev info, in addition to the existing "fw.version",
which is currently Mellanox-specific.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests: devlink_lib: add check for devlink device existence

If user passes devlink handle over DEVLINK_DEV variable, check if the
device exists.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210527105515.790330-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.14-20210527' of git://git./linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
can-next 2021-05-27

The first 2 patches are by Geert Uytterhoeven and convert the rcan_can
and rcan_canfd device tree bindings to yaml.

The next 2 patches are by Oliver Hartkopp and me and update the CAN
uapi headers.

zuoqilin's patch removes an unnecessary variable from the CAN proc
code.

Patrick Menschel contributes 3 patches for CAN ISOTP to enhance the
error messages.

Jiapeng Chong's patch removes two dead stores from the softing driver.

The next 4 patches are by me and silence several warnings found by
clang compiler.

Jimmy Assarsson's patches for the kvaser_usb driver add support for
the Kvaser hydra devices.

Dario Binacchi provides 2 patches for the c_can driver, first removing
an unused variable, then adding basic ethtool support to query driver
and ring parameter info.

The last 4 patches are by Torin Cooper-Bennun and clean up the m_can
driver.

* tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (21 commits)
  can: m_can: fix whitespace in a few comments
  can: m_can: make TXESC, RXESC config more explicit
  can: m_can: clean up CCCR reg defs, order by revs
  can: m_can: use bits.h macros for all regmasks
  can: c_can: add ethtool support
  can: c_can: remove unused variable struct c_can_priv::rxmasked
  can: kvaser_usb: Add new Kvaser hydra devices
  can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID
  can: at91_can: silence clang warning
  can: mcp251xfd: silence clang warning
  can: mcp251x: mcp251x_can_probe(): silence clang warning
  can: hi311x: hi3110_can_probe(): silence clang warning
  can: softing: Remove redundant variable ptr
  can: isotp: Add error message if txqueuelen is too small
  can: isotp: add symbolic error message to isotp_module_init()
  can: isotp: change error format from decimal to symbolic error names
  can: proc: remove unnecessary variables
  can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame
  can: uapi: update CAN-FD frame description
  dt-bindings: can: rcar_canfd: Convert to json-schema
  ...
====================

Link: https://lore.kernel.org/r/20210527084532.1384031-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

devlink: append split port number to the port name

Instead of doing sprintf twice in case the port is split or not, append
the split port suffix in case the port is split.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210527104819.789840-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/mlx5: Fix lag port remapping logic

Fix the logic so that if both ports netdevices are enabled or disabled,
use the trivial mapping without swapping.

If only one of the netdevice's tx is enabled, use it to remap traffic to
that port.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Use boolean arithmetic to evaluate roce_lag

Avoid mixing boolean and bit arithmetic when evaluating validity of
roce_lag.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Remove unnecessary spin lock protection

Taking lag_lock to access ldev->tracker is meaningless in the context of
do_bond() and mlx5_lag_netdev_event().

Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Cap the maximum flow group size to 16M entries

The maximum number of large flow groups applies to both small and large
tables. For very large tables (such as the 2G SW steering tables) this may
create a small number of flow groups each with an unrealistic entries
domain (> 16M).

Set the maximum number of large flow groups to at least what user
requested, but with a maximum per group size of 16M entries.
For software steering, if user requested less than 128 large flow
groups, it will gives us about 128 16M groups in a 2G
entries tables.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Set max table size to 2G entries

SW steering has no table size limitations.
However, fs_core API is size aware.

Set SW steering tables to the maximum possible table size (INT_MAX).

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Move chains ft pool to be used by all firmware steering

Firmware FT pool is per device, but the software tracking of this pool
only services fs_chains users, and if another layer takes a flow table,
the pool will not be updated, and fs_chains will fail creating a flow
table, with no recovery till the flow table is returned.

Move FT pool to be global per device, and stored at the cmd level,
so all layers can use it.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Move table size calculation to steering cmd layer

Currently the table size is calculated by the fs_core layer. However, each
steering cmd instance has a different allocation logic. FW steering uses
a predefined pools of multiple sizes. SW steering doesn't have a pool,
and can allocate any size of tables.

Move the table size calculation to the steering cmd layer as a pre-step
for moving fs_chains pool logic globally to firmware steering, and
increasing table sizes for software steering. In addition, change the
size parameter to absolute size to allow the special zero value to
mean "get next available maximum size".

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE

Commit 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow
counters") added MLX5_CAP_FLOWTABLE_TYPE but forgot to account
for FS_FT_NIC_TX case in the expression.

Although the expression will return 1 for this case instead of the
actual cap, there isn't currently no known side affects of
missing this case.

Add the FS_FT_NIC_TX case.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: DR, Remove unused field of send_ring struct

Remove unused field of struct mlx5dr_send_ring

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>