drm/msm/gpu: Map the ringbuffer in the iova at create time

For reasons that I'm sure made perfect sense at the time we were
opting to defer the iova alloc / pin on the ringbuffer until HW
init time so when we moved to iova reference counting we ended
up adding a reference count every time the hardware started.
Not that it mattered (because the ring is always around) but
it did make the debug output look odd. Allocate and pin the iova
at create time instead.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Add a name field for gem objects

For debugging purposes it is useful to assign descriptions
to buffers so that we know what they are used for. Add
a field to the buffer object and use that to name the various
kernel side allocations which ends up looking like like this
in /d/dri/X/gem:

   flags       id ref  offset   kaddr            size     madv      name
   00040000: I  0 ( 1) 00000000 0000000070b79eca 00004096           memptrs
      vmas: [gpu: 01000000,mapped,inuse=1]
   00020000: I  0 ( 1) 00000000 0000000031ed4074 00032768           ring0

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Count how many times iova memory is pinned

Add a reference count to track how many times a particular
chunk of iova memory is pinned (mapped) in the iomu and
add msm_gem_unpin_iova to give up references.

It is important to note that msm_gem_unpin_iova replaces
msm_gem_put_iova because the new implicit behavior
that an assigned iova in a given vma is now valid for the
life of the buffer and what we are really focusing on is
the use of that iova.

For now the unmappings are lazy; once the reference counts
go to zero they *COULD* be unmapped dynamically but that
will require an outside force such as a shrinker or
mm_notifiers.  For now, we're just focusing on getting
the counting right and setting ourselves up to be ready
for the future.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Add msm_gem_get_and_pin_iova()

Add a new function to get and pin the iova memory in one
step (basically renaming the old msm_gem_get_iova function)
and switch msm_gem_get_iova() to only allocate an iova but
not map it in the IOMMU. This is only currently used by
msm_ioctl_gem_info() since all other users of of the iova
expect that the memory be immediately available.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Clean up and enhance the output of the 'gem' debugfs node

Add headers for the 'gem' debugfs file to make it easier to remember
what all the values mean and move the list of virtual address regions
to the next line and add the name and map status to make it clearer
what we are looking at.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Split msm_gem_get_iova into two steps

Split the operation of msm_gem_get_iova into two operations:
1) allocate an iova and 2) map (pin) the backing memory int the
iommu. This is the first step toward allowing memory pinning
to occur independently of the iova management.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Remove sgt from the mmu unmap function

The scatter gather table doesn't need to be passed in for the
MMU unmap function.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Add a common function to free kernel buffer objects

Buffer objects allocated with msm_gem_kernel_new() are mostly
freed the same way so we can save a few lines of code with a
common function.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/a6xx: Track and manage a6xx state memory

The a6xx GPU state allocates a LOT of memory. Add a bit of
infrastructure to track the memory allocations in the GPU structure
and delete them when the state is destroyed much the same way
that devm works with the device model as a whole.  This protects
against the developer accidentally forgetting to add a kfree() to
an ever growing list.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/a6xx: Add a6xx gpu state

Add support for gathering and dumping the a6xx GPU state including
registers, GMU registers, indexed registers, shader blocks,
context clusters and debugbus.

v2: Fix bugs discovered by Sharat Masetty

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/adreno: Don't capture register values if target doesn't define them

If the GPU target doesn't define a list of registers then gracefully skip
capturing and/or printing them. This is used by more complex targets like
6xx that have other means of capturing register values.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/gpu: Move gpu_poll_timeout() to adreno_gpu.h

The gpu_poll_timeout() function can be useful to multiple targets so
mvoe it into adreno_gpu.h from the a5xx code.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/gpu: Only store local command buffers in the GPU state

Instead of trying to store all the tagged buffers from a hanging
submit only store the command buffers that were not imported.
This cuts down on the amount of data stored in the GPU state to
the base minimum of useful information.

The downside is that this will make it more difficult to
successfully replay a hang with just the GPU state but there
isn't any reason why that functionality can't be added back
in later once we've figured out how to better communicate
such massive amounts of data.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/gpu: Add trace events for tracking GPU submissions

Add trace events to track the progress of a GPU submission
msm_gpu_submit occurs at the beginning of the submissions,
msm_gpu_submit_flush happens when the submission is put on
the ringbuffer and msm_submit_flush_retired is sent when
the operation is retired.

To make it easier to track the operations a unique sequence
number is assigned to each submission and displayed in each
event output so a human or a script can easily associate
the events related to a specific submission.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/gpu: Add per-submission statistics

Add infrastructure to track statistics for GPU submissions
by sampling certain perfcounters before and after a submission.

To store the statistics, the per-ring memptrs region is
expanded to include room for up to 64 entries - this should
cover a reasonable amount of inflight submissions without
worrying about losing data. The target specific code inserts
PM4 commands to sample the counters before and after
submission and store them in the data region. The CPU can
access the data after the submission retires to make sense
of the statistics and communicate them to the user.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Gracefully handle failure in _msm_gem_kernel_new

If any of the function calls in _msm_gem_kernel_new fail we need
to make sure to dereference the GEM object with the appropriate
function for the current locking state.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/gpu: Allocate the correct size for the GPU memptrs

Allocate the correct buffer size for the GPU memptrs. The incorrect
size hasn't affected us thus far since the incorrect size was larger
than the intended size and we're still stuck on page sized
granularity anyway but technically correct is the best kind of
correct.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: update generated headers

Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: set geometry for iommu domain

Specify geometry for DPU iommu domain which sets
the address space for gem allocations.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Suggested-by: Jordan Crouse <jcrouse@codeaurora.org>
Suggested-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm: msm: Use DRM_DEV_* instead of dev_*

Use DRM_DEV_INFO/ERROR/WARN instead of dev_info/err/debug to generate
drm-formatted specific log messages so that it will be easy to
differentiate in case of multiple instances of driver.

Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove checks from dpu_plane_destroy_state()

They're not needed.

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Clean up _dpu_core_video_mode_intf_connected()

Local variable is not needed and condition can't be hit.

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove empty/useless labels

I noticed an empty label while driving by and decided to use
coccinelle to see if there were any more. Here's the spatch and the
invocation:
---

@@
identifier lbl;
expression E;
@@

- goto lbl;
+ return E;
...
- lbl:
        return E;

@@
identifier lbl;
@@

- goto lbl;
+ return;
...
- lbl:
-       return;

---
spatch --allow-inconsistent-paths --sp-file file.spatch --dir
drivers/gpu/drm/msm/disp/dpu1 --in-place
---

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove 'inline' from several functions

Per chapter 15 of coding-style, removing 'inline' keyword from functions
that are larger than a typical macro. In a couple of cases I've
simplified the function and kept the inline.

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove _dpu_encoder_power_enable()

It's unused, remove it.

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Remove unused functions from msm_media_info.h

These functions aren't used anywhere, remove them.

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Remove dpu_encoder_phys_ops->hw_reset()

We call out of the virt encoder into phys only to call back into the
virt for hw reset. So remove the indirection and just call the virt
function directly.

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Replace dpu_crtc_reset by atomic helper

Since we removed all suspend logic from the crtc code (see patch 3/4),
dpu_crtc_reset does the same things as drm_atomic_helper_crtc_reset, so let's
just replace it with a call to the atomic helper.

v3: added patch to patchset

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Remove suspend state tracking from crtc

Since drm core's modeset locks serialize atomic commits, we don't need to
track whether or not we're in a suspended state from inside the crtc for
dpu_crtc_enable/disable. This patch removes the suspend logic from the crtc and
removes the relevant tracing from dpu_trace. Since we removed all calls
to dpu_kms_is_suspend_state, we can remove that function and the
suspend_state field of dpu_kms as well.

v2: added patch to patchset
v3: reworded commit body and moved deletion of dpu_kms_is_suspend_state and
suspend_state to this patch

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Cut dpu_kms hooks from msm_pm_suspend/resume

Removes the traces of the non-atomic helper calls in
msm_pm_suspend/resume since we just deleted those functions (see patch
1). Also removes the drm_kms_helper_poll_disable/enable calls, since
the DRM_CONNECTOR_POLL_CONNECT flag is never set so periodic polling
doesn't happen anyways.

v2: reorganized patch order
v3: made error checks less severe

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/dpu: Remove dpu_kms_pm_suspend/resume

PM resume was crashing during dpu_kms_pm_resume. This patch removes
dpu_kms_pm_suspend/resume so that msm_pm_suspend/resume uses the atomic
helpers instead (see next patch). This patch also removes
dpu_kms_is_suspend_blocked since it is never called.

v2: Reorganized patches in patchset

Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: dpu: Add tracing around CTL_FLUSH

I found these tracepoints useful for debugging cursor/ctl, someone else
might find them useful too

Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Merge tag 'drm-misc-next-2018-12-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Final changes to drm-misc-next for v4.21:

UAPI Changes:

Core Changes:
- Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj.
- Add and use DRM_MODESET_LOCK_BEGIN/END helpers.
- Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and
  drm_atomic_helper_commit_duplicated_state()
- Fix drm_atomic_state_helper.[c] extraction.

Driver Changes:
- Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms,
  v3d, and pl111.
- vc4: Allow scaling and YUV formats on cursor planes.
- v3d: Enable use of the Texture Formatting Unit, and fix
  prime imports of buffers from other drivers.
- Add support for the AUO G101EVN010 panel.
- sun4i: Enable support for the H6 display engine.

Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: added drm/v3d: fix broken build to the merge commit]
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/321be9d3-ab75-5f92-8193-e5113662edef@linux.intel.com

Merge tag 'vmwgfx-next-2018-12-05' of git://people.freedesktop.org/~thomash/linux into drm-next

Pull request of 2018-12-05

Page flip with damage by Deepak and others,
Various vmwgfx minor fixes anc cleanups.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205103554.3675-1-thellstrom@vmware.com

Merge tag 'exynos-drm-next-for-v4.21' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

- Refactoring of DMA and IOMMU code
  . This patch series simplifies DMA mapping creation by avoiding looping
    all components to get dma device object, reduces code size by merging
    IOMMU and DMA code.
- Enhance plane alpha and blend mode support
  . This patch series adds configurable plane and pixel blend mode support
    for Exynos5433 DECON device.
- Fix color format setting of Mixer driver
  . This patch series fixes color format and range setting by splitting
    range and format.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1544002853-11661-1-git-send-email-inki.dae@samsung.com

Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux into drm-next

amdgpu and amdkfd:
- Freesync support
- ABM support in DC
- KFD support for vega12 and polaris12
- Add sdma paging queue support for vega
- Use ACPI to query backlight range on supported platforms
- Clean up doorbell handling
- KFD fix for pasid handling under non-HWS
- Misc cleanups and fixes

scheduler:
- Revert "fix timeout handling v2"

radeon:
- Fix possible overflow on 32 bit

ttm:
- Fix for LRU handling for ghost objects

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130192505.2946-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-2018-12-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Final drm/i915 changes for v4.21:
- ICL DSI video mode enabling (Madhav, Vandita, Jani, Imre)
- eDP sink count fix (José)
- PSR fixes (José)
- DRM DP helper and i915 DSC enabling (Manasi, Gaurav, Anusha)
- DP FEC enabling (Anusha)
- SKL+ watermark/ddb programming improvements (Ville)
- Pixel format fixes (Ville)
- Selftest updates (Chris, Tvrtko)
- GT and engine workaround improvements (Tvrtko)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87va496uoe.fsf@intel.com

drm: revert "expand replace_fence to support timeline point v2"

This reverts commit 9a09a42369a4a37a959c051d8e1a1f948c1529a4.

The whole interface isn't thought through. Since this function can't
fail we actually can't allocate an object to store the sync point.

Sorry, I should have taken the lead on this from the very beginning and
reviewed it more thoughtfully. Going to propose a new interface as a
follow up change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265580/

drm/vmwgfx: Use the standard atomic helpers for page-flip

Our wrappers don't do anything useful anymore except calling the
atomic helpers.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Remove set but not used variable 'file_priv'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/vmwgfx/vmwgfx_fence.c: In function 'vmw_event_fence_action_seq_passed':
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c:909:19: warning:
 variable 'file_priv' set but not used [-Wunused-but-set-variable]
  struct drm_file *file_priv;

It not used any more since
commit fb740cf2492c ("drm: Create drm_send_event helpers")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: remove redundant return ret statement

The return statement is redundant as there is a return statement
immediately before it so we have dead code that can be removed.
Also remove the unused declaration of ret.

Detected by CoverityScan, CID#1473793 ("Structurally dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Fix a layout race condition

This fixes a layout update race condition. We make sure
the crtc mutex is locked before we dereference crtc->state. Otherwise the
state might change under us.

Since now we're already holding the crtc mutexes when reading the gui
coordinates, protect them with the crtc mutexes rather than with the
requested_layout mutex.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Fix up the implicit display unit handling

Make the connector is_implicit property immutable.
As far as we know, no user-space application is writing to it.

Also move the verification that all implicit display units scan out
from the same framebuffer to atomic_check().

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

MAINTAINERS: Update vmwgfx maintainers

It's been fun! To be continued.....

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Don't clear mode::type anymore

With kernel commit "drm/modes: Kill off the oddball DRM_MODE_TYPE_CRTC_C
vs. DRM_MODE_TYPE_BUILTIN handling", no need to clear mode::type for
user-space bug.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Use atomic helper function for dirty fb IOCTL

USe new atomic helper for dirty fb IOCTL which make use of damage
interface. Note that this is only done for STDU and SOU, for legacy
display unit still using old interface.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Enable FB_DAMAGE_CLIPS property for SOU primary plane

SOU primary plane now support damage clips, enable it for user-space.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Update comments for sou plane update function

Update comments to sync with code.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Use the new interface for SOU plane update

With new interface to do plane update on SOU available, use that instead
of old kms_dirty.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Implement SOU plane update for BO backed fb

Using the new interface implement SOU plane update for BO backed fb.

v2: Rebase to new resource validation.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Implement SOU plane update for surface backed fb

Using the new interface implement SOU plane update for surface backed
fb.

v2: Rebase to new resource validation.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Enable FB_DAMAGE_CLIPS property for STDU primary plane

STDU primary plane now support damage clips, enable it for user-space.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Update comments for stdu plane update

Update the comments to sync with code.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Use the new interface for STDU plane update

With new interface to do plane update on STDU available, use that
instead of old kms_dirty.

v2: Use fence from new resource validation.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Implement STDU plane update for BO backed fb

Using the new interface implement STDU plane update for BO backed fb.

v2: Rebase to new resource validation.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Implement STDU plane update for surface backed fb

Using the new interface implement STDU plane update for surface backed
fb.

v2: Rebase to new resource validation.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Add a new interface for plane update on a display unit

Add a new struct vmw_du_update_plane similar to vmw_kms_dirty which
represent the flow of operations needed to update a display unit from
surface or bo (blit a new framebuffer).

v2:
- Kernel doc correction.
- Rebase.

v3: Rebase to new resource validation.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm: Add helper to implement legacy dirtyfb

Add an atomic helper to implement dirtyfb support.  This is needed to
support DSI command-mode panels with x11 userspace (ie. when we can't
rely on pageflips to trigger a flush to the panel).

v2: Modified the helper to use plane fb_damage_clips property and
removed plane_state::dirty flag.

v3:
- Use uapi drm_mode_rect.
- Support annotate flags.

v4: Correct kernel doc.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/selftest: Add drm damage helper selftest

Selftest for drm damage helper iterator functions.

v2: Rebase to new test-drm_modeset.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm: Add helper iterator functions for plane fb_damage_clips blob

With fb_damage_clips blob property in drm_plane_state, this patch adds
helper iterator to traverse the damage clips that lie inside plane src.
Iterator will return full plane src as damage in case need full plane
update or damage is not specified.

v2:
- Plane src clipping correction
- Handle no plane update case in iter_next

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm: Add a new helper to validate damage during atomic_check

This helper function makes sure that damage from plane state is
discarded for full modeset.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm: Add a new plane property to send damage during plane update

FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions
on the plane in framebuffer coordinates of the framebuffer attached to
the plane.

The layout of blob data is simply an array of "struct drm_mode_rect".
Unlike plane src coordinates, damage clips are not in 16.16 fixed point.
As plane src in framebuffer cannot be negative so are damage clips. In
damage clip, x1/y1 are inclusive and x2/y2 are exclusive.

This patch also exports the kernel internal drm_rect to userspace as
drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient
to represent damage for current plane size.

Driver which are interested in enabling FB_DAMAGE_CLIPS property for a
plane should enable this property using drm_plane_enable_damage_clips.

v2:
- Input validation on damage clips against framebuffer size.
- Doc update, other minor changes.

Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/exynos: mixer: Fix color range setting

Color format and color range was set based on resolution. Change that,
by splitting range and format. Leave color format setting as it is,
set color range based on drm_display_mode using
drm_default_quant_range helper function.

Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20181128
using modetest.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mixer: Fix color format setting

Fix color format decision based on height(pixels).

According to CEA-861-E:
"High Definition (HD) - A CE video format that, inclusively, has between
720 to 1080 active vertical lines (Vactive) lines per video frame."

Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20181128
using modetest.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: decon: Make pixel blend mode configurable

The decon hardware supports different blend modes. Add pixel blend mode
property and make it configurable, by modifying the blend equation.

Tested on TM2 with Exynos 5433 CPU, on top of linux-next-20181019.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: decon: Make plane alpha configurable

The decon hardware supports variable plane alpha. Currently planes
are opaque, make this configurable.

Tested on TM2 with Exynos 5433 CPU, on top of linux-next-20181019.

Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'imx-drm-next-2018-12-03' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: update image-convert with fixes for multi-tiled scaling

Update the ipu-v3 mem2mem image-convert code, with some fixes for race
conditions, alignment issues, and visual artifacts due to tile alignment
and scaling factor issues when scaling images larger than hardware
limitations in multiple tiles. This will allow the V4L2 mem2mem scaler
driver to write output images larger than 1024x1024 pixels.

Also switch drm/imx source files to SPDX license identifiers, constify
struct clk_ops in imx-tve, and add a timeout warning to the busy wait in
ipu_plane_disable().

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1543835266.5647.1.camel@pengutronix.de

drm/i915: Update DRIVER_DATE to 20181204

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/icl: fix transcoder state readout

Commit 2ca711caeca2 ("drm/i915/icl: Consider DSI for getting transcoder
state") clobbers the previously read TRANS_DDI_FUNC_CTL_EDP register
contents with TRANS_DDI_FUNC_CTL_DSI0 contents. Fix the state readout,
and handle DSI 1 while at it.

Use a bitmask for iterating and logging transcoders, because the allowed
combinations are a bit funky.

Fixes: 2ca711caeca2 ("drm/i915/icl: Consider DSI for getting transcoder state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108928
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204101926.17174-1-jani.nikula@intel.com

drm/i915: Allocate a common scratch page

Currently we allocate a scratch page for each engine, but since we only
ever write into it for post-sync operations, it is not exposed to
userspace nor do we care for coherency. As we then do not care about its
contents, we can use one page for all, reducing our allocations and
avoid complications by not assuming per-engine isolation.

For later use, it simplifies engine initialisation (by removing the
allocation that required struct_mutex!) and means that we can always rely
on there being a scratch page.

v2: Check that we allocated a large enough scratch for I830 w/a

Fixes: 06e562e7f515 ("drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5") # v4.18.20
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108850
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204141522.13640-1-chris@chris-wilson.co.uk
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.18.20+

drm/tinydrm: Use kmemdup rather than duplicating its implementation in repaper_spi_transfer()

use kmemdup rather than duplicating its implementation

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1543471233-159568-1-git-send-email-yuehaibing@huawei.com

drm/i915: Trim unused workaround list entries

The new workaround list allocator grows the list in chunks so will end up
with some unused space. Trim it when the initialization phase is done to
free up a tiny bit of slab.

v2:
 * Simplify with kmemdup. (Chris Wilson)

v3:
 * Refactor for __size removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203125014.3219-8-tvrtko.ursulin@linux.intel.com

drm/i915: Fuse per-context workaround handling with the common framework

Convert the per context workaround handling code to run against the newly
introduced common workaround framework and fuse the two to use the
existing smarter list add helper, the one which does the sorted insert and
merges registers where possible.

This completes migration of all four classes of workarounds onto the
common framework.

Existing macros are kept untouched for smaller code churn.

v2:
 * Rename to list name ctx_wa_list and move from dev_priv to engine.

v3:
 * API rename and parameters tweaking. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203133357.10341-1-tvrtko.ursulin@linux.intel.com

drm/i915: Move register white-listing to the common workaround framework

Instead of having a separate list of white-listed registers we can
trivially move this to the common workarounds framework.

This brings us one step closer to the goal of driving all workaround
classes using the same code.

v2:
 * Use GEM_DEBUG_WARN_ON for the sanity check. (Chris Wilson)

v3:
 * API rename. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203125014.3219-6-tvrtko.ursulin@linux.intel.com

drm/i915/selftests: Add tests for GT and engine workaround verification

Two simple selftests which test that both GT and engine workarounds are
not lost after either a full GPU reset, or after the per-engine ones.

(Including checks that one engine reset is not affecting workarounds not
belonging to itself.)

v2:
 * Rebase for series refactoring.
 * Add spinner for actual engine reset!
 * Add idle reset test as well. (Chris Wilson)
 * Share existing global_reset_lock. (Chris Wilson)

v3:
 * intel_engine_verify_workarounds can be static.
 * API rename. (Chris Wilson)
 * Move global reset lock out of the loop. (Chris Wilson)

v4:
 * Add missing rpm puts. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203125014.3219-5-tvrtko.ursulin@linux.intel.com

drm/i915: Verify GT workaround state after GPU init

Since we now have all the GT workarounds in a table, by adding a simple
shared helper function we can now verify that their values are still
applied after some interesting events in the lifetime of the driver.

Initially we only do this after GPU initialization.

v2:
 Chris Wilson:
 * Simplify verification by realizing it's a simple xor and and.
 * Remove verification from engine reset path.
 * Return bool straight away from the verify API.

v3:
 * API rename. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203125014.3219-4-tvrtko.ursulin@linux.intel.com

drm/i915: Introduce per-engine workarounds

We stopped re-applying the GT workarounds after engine reset since commit
59b449d5c82a ("drm/i915: Split out functions for different kinds of
workarounds").

Issue with this is that some of the GT workarounds live in the MMIO space
which gets lost during engine resets. So far the registers in 0x2xxx and
0xbxxx address range have been identified to be affected.

This losing of applied workarounds has obvious negative effects and can
even lead to hard system hangs (see the linked Bugzilla).

Rather than just restoring this re-application, because we have also
observed that it is not safe to just re-write all GT workarounds after
engine resets (GPU might be live and weird hardware states can happen),
we introduce a new class of per-engine workarounds and move only the
affected GT workarounds over.

Using the framework introduced in the previous patch, we therefore after
engine reset, re-apply only the workarounds living in the affected MMIO
address ranges.

v2:
 * Move Wa_1406609255:icl to engine workarounds as well.
 * Rename API. (Chris Wilson)
 * Drop redundant IS_KABYLAKE. (Chris Wilson)
 * Re-order engine wa/ init so latest platforms are first. (Rodrigo Vivi)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=107945
Fixes: 59b449d5c82a ("drm/i915: Split out functions for different kinds of workarounds")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203133341.10258-1-tvrtko.ursulin@linux.intel.com

drm/i915: Record GT workarounds in a list

To enable later verification of GT workaround state at various stages of
driver lifetime, we record the list of applicable ones per platforms to a
list, from which they are also applied.

The added data structure is a simple array of register, mask and value
items, which is allocated on demand as workarounds are added to the list.

This is a temporary implementation which later in the series gets fused
with the existing per context workaround list handling. It is separated at
this stage since the following patch fixes a bug which needs to be as easy
to backport as possible.

Also, since in the following patch we will be adding a new class of
workarounds (per engine) which can be applied from interrupt context, we
straight away make the provision for safe read-modify-write cycle.

v2:
 * Change dev_priv to i915 along the init path. (Chris Wilson)
 * API rename. (Chris Wilson)

v3:
 * Remove explicit list size tracking in favour of growing the allocation
   in power of two chunks. (Chris Wilson)

v4:
 Chris Wilson:
 * Change wa_list_finish to early return.
 * Copy workarounds using the compiler for static checking.
 * Do not bother zeroing unused entries.
 * Re-order struct i915_wa_list.

v5:
 * kmalloc_array.
 * Whitespace cleanup.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203133319.10174-1-tvrtko.ursulin@linux.intel.com

drm/i915: change i915_sw_fence license to MIT

Change the license of the i915_sw_fence files to MIT matching
most of the other i915 files.  This makes it possible to use them
in a new port of i915 to OpenBSD.

Besides some mechanical tree wide changes Chris Wilson is the sole
author of these files with Intel holding the copyright.

Intel's legal team have given permission to change the license according
to Joonas Lahtinen.

v2: expand commit message and note permission from Intel legal

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129013051.17525-1-jsg@jsg.id.au

drm/i915: Complete the fences as they are cancelled due to wedging

We inspect the requests under the assumption that they will be marked as
completed when they are removed from the queue. Currently however, in the
process of wedging the requests will be removed from the queue before they
are completed, so rearrange the code to complete the fences before the
locks are dropped.

<1>[  354.473346] BUG: unable to handle kernel NULL pointer dereference at 0000000000000250
<6>[  354.473363] PGD 0 P4D 0
<4>[  354.473370] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[  354.473380] CPU: 0 PID: 4470 Comm: gem_eio Tainted: G     U            4.20.0-rc4-CI-CI_DRM_5216+ #1
<4>[  354.473393] Hardware name: Intel Corporation NUC7CJYH/NUC7JYB, BIOS JYGLKCPX.86A.0027.2018.0125.1347 01/25/2018
<4>[  354.473480] RIP: 0010:__i915_schedule+0x311/0x5e0 [i915]
<4>[  354.473490] Code: 49 89 44 24 20 4d 89 4c 24 28 4d 89 29 44 39 b3 a0 04 00 00 7d 3a 41 8b 44 24 78 85 c0 74 13 48 8b 93 78 04 00 00 48 83 e2 fc <39> 82 50 02 00 00 79 1e 44 89 b3 a0 04 00 00 48 8d bb d0 03 00 00
<4>[  354.473515] RSP: 0018:ffffc900001bba90 EFLAGS: 00010046
<4>[  354.473524] RAX: 0000000000000003 RBX: ffff8882624c8008 RCX: f34a737800000000
<4>[  354.473535] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8882624c8048
<4>[  354.473545] RBP: ffffc900001bbab0 R08: 000000005963f1f1 R09: 0000000000000000
<4>[  354.473556] R10: ffffc900001bba10 R11: ffff8882624c8060 R12: ffff88824fdd7b98
<4>[  354.473567] R13: ffff88824fdd7bb8 R14: 0000000000000001 R15: ffff88824fdd7750
<4>[  354.473578] FS:  00007f44b4b5b980(0000) GS:ffff888277e00000(0000) knlGS:0000000000000000
<4>[  354.473590] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  354.473599] CR2: 0000000000000250 CR3: 000000026976e000 CR4: 0000000000340ef0
<4>[  354.473611] Call Trace:
<4>[  354.473622]  ? lock_acquire+0xa6/0x1c0
<4>[  354.473677]  ? i915_schedule_bump_priority+0x57/0xd0 [i915]
<4>[  354.473736]  i915_schedule_bump_priority+0x72/0xd0 [i915]
<4>[  354.473792]  i915_request_wait+0x4db/0x840 [i915]
<4>[  354.473804]  ? get_pwq.isra.4+0x2c/0x50
<4>[  354.473813]  ? ___preempt_schedule+0x16/0x18
<4>[  354.473824]  ? wake_up_q+0x70/0x70
<4>[  354.473831]  ? wake_up_q+0x70/0x70
<4>[  354.473882]  ? gen6_rps_boost+0x118/0x120 [i915]
<4>[  354.473936]  i915_gem_object_wait_fence+0x8a/0x110 [i915]
<4>[  354.473991]  i915_gem_object_wait+0x113/0x500 [i915]
<4>[  354.474047]  i915_gem_wait_ioctl+0x11c/0x2f0 [i915]
<4>[  354.474101]  ? i915_gem_unset_wedged+0x210/0x210 [i915]
<4>[  354.474113]  drm_ioctl_kernel+0x81/0xf0
<4>[  354.474123]  drm_ioctl+0x2de/0x390
<4>[  354.474175]  ? i915_gem_unset_wedged+0x210/0x210 [i915]
<4>[  354.474187]  ? finish_task_switch+0x95/0x260
<4>[  354.474197]  ? lock_acquire+0xa6/0x1c0
<4>[  354.474207]  do_vfs_ioctl+0xa0/0x6e0
<4>[  354.474217]  ? __fget+0xfc/0x1e0
<4>[  354.474225]  ksys_ioctl+0x35/0x60
<4>[  354.474233]  __x64_sys_ioctl+0x11/0x20
<4>[  354.474241]  do_syscall_64+0x55/0x190
<4>[  354.474251]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[  354.474260] RIP: 0033:0x7f44b3de65d7
<4>[  354.474267] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48
<4>[  354.474293] RSP: 002b:00007fff974948e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
<4>[  354.474305] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f44b3de65d7
<4>[  354.474316] RDX: 00007fff97494940 RSI: 00000000c010646c RDI: 0000000000000007
<4>[  354.474327] RBP: 00007fff97494940 R08: 0000000000000000 R09: 00007f44b40bbc40
<4>[  354.474337] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c010646c
<4>[  354.474348] R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000

v2: Avoid floating requests.
v3: Can't call dma_fence_signal() under the timeline lock!
v4: Can't call dma_fence_signal() from inside another fence either.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203113701.12106-2-chris@chris-wilson.co.uk

drm/vkms: Remove set but not used variable 'vkms_obj'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/vkms/vkms_plane.c: In function 'vkms_prepare_fb':
drivers/gpu/drm/vkms/vkms_plane.c:144:26: warning:
 variable 'vkms_obj' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit
8ce1bb0b5337 ("drm/vkms: map/unmap buffers in [prepare/cleanup]_fb hooks")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1543634444-186448-1-git-send-email-yuehaibing@huawei.com

drm/i915/dp: Fix inconsistent indenting

Always show the FEC capability as it is initialised to 0 before error.
Fixing,

drivers/gpu/drm/i915/intel_dp.c:3846 intel_dp_get_dsc_sink_cap() warn: inconsistent indenting

Fixes: 08cadae8e157 ("i915/dp/fec: Cache the FEC_CAPABLE DPCD register")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181120202439.13017-2-chris@chris-wilson.co.uk

drm/sun4i: Add compatible for H6 display engine

H6 is first Allwinner SoC which supports 10 bit colors, HDR and AFBC.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-9-jernej.skrabec@siol.net

drm/exynos/iommu: merge IOMMU and DMA code

As DMA code is the only user of IOMMU code both files can be merged.
It allows to remove stub functions, after slight adjustment of
exynos_drm_register_dma. Since IOMMU functions are used locally they
can be marked static.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/iommu: replace preprocessor conditionals with C conditionals

Using C conditionals is preferred solution - it provides better code
coverage, makes code more clear.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/iommu: move IOMMU specific stuff into exynos_drm_iommu.c

Since __exynos_iommu* functions are used only in exynos_drm_iommu.c we can
move them there.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/iommu: integrate IOMMU/DMA internal API

Exynos DRM drivers should work with and without IOMMU. Providing common
API generic to both scenarios should make code cleaner and allow further
code improvements.
The patch removes including of exynos_drm_iommu.h as the file contains
mostly IOMMU specific stuff, instead it exposes exynos_drm_*_dma functions
and puts them into exynos_drm_dma.c.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/iommu: remove DRM_EXYNOS_IOMMU Kconfig symbol

DRM_EXYNOS_IOMMU symbol is not configurable, it is always equal to
EXYNOS_IOMMU.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: simplify DMA mapping

Moving DMA mapping creation to drm_iommu_attach_device allows to avoid
looping through all components and maintaining DMA device flags.

v2: take care of configurations without IOMMU

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/i915: Move display device info capabilities to its own struct

This helps separate what capabilities are display capabilities.

v3: Moving display struct right after flags (Lucas)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130232048.14216-2-jose.souza@intel.com

drm/i915: Add HAS_DISPLAY() and use it

Right now it is decided if GEN has display by checking the num_pipes,
so lets make it explicit and use a macro.

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130232048.14216-1-jose.souza@intel.com

drm/i915/dp: Fix link compute m_n calc for DSC

Fix the intel_link_compute_m_n in case of display stream
compression. This patch passes the compressed_bpp to
intel_link_compute_m_n if compression is enabled.

Fixes: a4a157777c80 ("drm/i915/dp: Compute DSC pipe config in atomic check")
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201010412.32372-1-manasi.d.navare@intel.com

drm/v3d: Add more tracepoints for V3D GPU rendering.

The core scheduler tells us when the job is pushed to the scheduler's
queue, and I had the job_run functions saying when they actually queue
the job to the hardware.  By adding tracepoints for the very top of
the ioctls and the IRQs signaling job completion, "perf record -a -e
v3d:.\* -e gpu_scheduler:.\* <job>; perf script" gets you a pretty
decent timeline.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-5-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

drm/v3d: Add missing fence timeline name for TFU.

We shouldn't be returning v3d-render for our new queue.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 83d5139982db ("drm/v3d: Add support for submitting jobs to the TFU.")
Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-6-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>

drm/syncobj: use dma_fence_get_stub

Extract of useful code from the timeline work. Let's use just a single
stub fence instance instead of allocating a new one all the time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265248/

dma-buf: add dma_fence_get_stub

Extract of useful code from the timeline work. This provides a function
to return a stub or dummy fence which is always signaled.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265248/

drm/i915/sysfs: make attrs arrays const

They don't need to be modified.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004143750.30880-2-jani.nikula@intel.com

sysfs: constify sysfs create/remove files harder

Let the passed in array be const (and thus placed in rodata) instead of
a mutable array of const pointers.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004143750.30880-1-jani.nikula@intel.com

drm/i915/vgpu: Disallow loading on old vGPU hosts

Since commit fd8526e50902 ("drm/i915/execlists: Trust the CSB") we
actually broke the force-mmio mode for our execlists implementation. No
one noticed, so ergo no one is actually using an old vGPU host (where we
required the older method) and so can simply remove the broken support.

v2: csb_read can go as well (Mika)

Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: fd8526e50902 ("drm/i915/execlists: Trust the CSB")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130125954.11924-1-chris@chris-wilson.co.uk

drm/panel: simple: Add AUO G101EVN010 panel support

The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
panel.

Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[treding@nvidia.com: sort new entry alphabetically]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540480173-12009-2-git-send-email-alex.gonzalez@digi.com