Linus Torvalds [Fri, 19 Jun 2020 19:19:12 +0000 (12:19 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Unfortunately, we still have a number of outstanding issues so there
will be more fixes to come, but this lot are a good start.
- Fix handling of watchpoints triggered by uaccess routines
- Fix initialisation of gigantic pages for CMA buffers
- Raise minimum clang version for BTI to avoid miscompilation
- Fix data race in SVE vector length configuration code
- Ensure address tags are ignored in kern_addr_valid()
- Dump register state on fatal BTI exception
- kexec_file() cleanup to use struct_size() macro"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
arm64: kexec_file: Use struct_size() in kmalloc()
arm64: mm: reserve hugetlb CMA after numa_init
arm64: bti: Require clang >= 10.0.1 for in-kernel BTI support
arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n
arm64: pgtable: Clear the GP bit for non-executable kernel pages
arm64: mm: reset address tag set by kasan sw tagging
arm64: traps: Dump registers prior to panic() in bad_mode()
arm64/sve: Eliminate data races on sve_default_vl
docs/arm64: Fix typo'd #define in sve.rst
arm64: remove TEXT_OFFSET randomization
Linus Torvalds [Fri, 19 Jun 2020 18:45:03 +0000 (11:45 -0700)]
Merge tag 'overflow-v5.8-rc2' of git://git./linux/kernel/git/kees/linux
Pull flex-array size helper from Kees Cook:
"During the treewide clean-ups of zero-length "flexible arrays", the
struct_size() helper was heavily used, but it was noticed that many
times it would have been nice to have an additional helper to get the
size of just the flexible array itself.
This need appears to be even more common when cleaning up the 1-byte
array "flexible arrays", so Gustavo implemented it.
I'd love to get this landed early so it can be used during the v5.9
dev cycle to ease the 1-byte array cleanups."
* tag 'overflow-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
overflow.h: Add flex_array_size() helper
Linus Torvalds [Fri, 19 Jun 2020 18:39:57 +0000 (11:39 -0700)]
Merge tag 'perf-tools-fixes-2020-06-02' of git://git./linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Update various UAPI headers, some automatically adding support for a
new MSR and the faccess2 syscall.
- Fix corner case NULL deref in the histograms code.
- Fix corner case NULL deref in 'perf stat' aggregation code.
- Fix array pointer deref and old style declaration in the parsing of
events.
- Fix segfault when processing ZSTD compressed perf.data files in 'perf
script' due to lack of initialization of the ZSTD library.
- Handle __attribute__((user)) in libtraceevent fixing the parsing of
syscall tracepoints with user buffers.
- Make libtraevent aware of __builtin_expect() appearing in tracepoint
fields.
- Make the BPF prologue generation use bpf_probe_read_{user,kernel}().
- Fix the '@user' attribute parsing in kprobes variables in 'perf
probe'.
- Fix error message when asking for -fsanitize=address without required
libraries.
* tag 'perf-tools-fixes-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (22 commits)
perf build: Fix error message when asking for -fsanitize=address without required libraries
tools lib traceevent: Add handler for __builtin_expect()
tools lib traceevent: Handle __attribute__((user)) in field names
tools lib traceevent: Add append() function helper for appending strings
tools headers UAPI: Sync linux/fs.h with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf script: Initialize zstd_data
perf pmu: Remove unused declaration
perf parse-events: Fix an old style declaration
perf parse-events: Fix an incompatible pointer
perf bpf: Fix bpf prologue generation
perf probe: Fix user attribute access in kprobes
perf stat: Fix NULL pointer dereference
perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events()
tools headers UAPI: Sync kvm.h headers with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
perf beauty: Add support to STATX_MNT_ID in the 'statx' syscall 'mask' argument
tools headers uapi: Sync linux/stat.h with the kernel sources
...
Linus Torvalds [Thu, 18 Jun 2020 19:35:51 +0000 (12:35 -0700)]
Merge branch 'hch' (maccess patches from Christoph Hellwig)
Merge non-faulting memory access cleanups from Christoph Hellwig:
"Andrew and I decided to drop the patches implementing your suggested
rename of the probe_kernel_* and probe_user_* helpers from -mm as
there were way to many conflicts.
After -rc1 might be a good time for this as all the conflicts are
resolved now"
This also adds a type safety checking patch on top of the renaming
series to make the subtle behavioral difference between 'get_user()' and
'get_kernel_nofault()' less potentially dangerous and surprising.
* emailed patches from Christoph Hellwig <hch@lst.de>:
maccess: make get_kernel_nofault() check for minimal type compatibility
maccess: rename probe_kernel_address to get_kernel_nofault
maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault
maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault
Linus Torvalds [Thu, 18 Jun 2020 19:10:37 +0000 (12:10 -0700)]
maccess: make get_kernel_nofault() check for minimal type compatibility
Now that we've renamed probe_kernel_address() to get_kernel_nofault()
and made it look and behave more in line with get_user(), some of the
subtle type behavior differences end up being more obvious and possibly
dangerous.
When you do
get_user(val, user_ptr);
the type of the access comes from the "user_ptr" part, and the above
basically acts as
val = *user_ptr;
by design (except, of course, for the fact that the actual dereference
is done with a user access).
Note how in the above case, the type of the end result comes from the
pointer argument, and then the value is cast to the type of 'val' as
part of the assignment.
So the type of the pointer is ultimately the more important type both
for the access itself.
But 'get_kernel_nofault()' may now _look_ similar, but it behaves very
differently. When you do
get_kernel_nofault(val, kernel_ptr);
it behaves like
val = *(typeof(val) *)kernel_ptr;
except, of course, for the fact that the actual dereference is done with
exception handling so that a faulting access is suppressed and returned
as the error code.
But note how different the casting behavior of the two superficially
similar accesses are: one does the actual access in the size of the type
the pointer points to, while the other does the access in the size of
the target, and ignores the pointer type entirely.
Actually changing get_kernel_nofault() to act like get_user() is almost
certainly the right thing to do eventually, but in the meantime this
patch adds logit to at least verify that the pointer type is compatible
with the type of the result.
In many cases, this involves just casting the pointer to 'void *' to
make it obvious that the type of the pointer is not the important part.
It's not how 'get_user()' acts, but at least the behavioral difference
is now obvious and explicit.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Wed, 17 Jun 2020 07:37:55 +0000 (09:37 +0200)]
maccess: rename probe_kernel_address to get_kernel_nofault
Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.
Also switch the argument order around, so that it acts and looks
like get_user().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luc Van Oostenryck [Wed, 17 Jun 2020 22:02:26 +0000 (00:02 +0200)]
sparse: use identifiers to define address spaces
Currently, address spaces in warnings are displayed as '<asn:X>' with
'X' being the address space's arbitrary number.
But since sparse v0.6.0-rc1 (late December 2018), sparse allows you to
define the address spaces using an identifier instead of a number. This
identifier is then directly used in the warnings.
So, use the identifiers '__user', '__iomem', '__percpu' & '__rcu' for
the corresponding address spaces. The default address space, __kernel,
being not displayed in warnings, stays defined as '0'.
With this change, warnings that used to be displayed as:
cast removes address space '<asn:1>' of expression
... void [noderef] <asn:2> *
will now be displayed as:
cast removes address space '__user' of expression
... void [noderef] __iomem *
This also moves the __kernel annotation to be the first one, since it is
quite different from the others because it's the default one, and so:
- it's never displayed
- it's normally not needed, nor in type annotations, nor in cast
between address spaces. The only time it's needed is when it's
combined with a typeof to express "the same type as this one but
without the address space"
- it can't be defined with a name, '0' must be used.
So, it seemed strange to me to have it in the middle of the other
ones.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tiezhu Yang [Thu, 18 Jun 2020 02:06:01 +0000 (10:06 +0800)]
perf build: Fix error message when asking for -fsanitize=address without required libraries
When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.
[yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
BUILD: Doing 'make -j4' parallel build
HOSTCC fixdep.o
HOSTLD fixdep-in.o
LINK fixdep
<stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
<stdin>:1:0: warning: -fsanitize=address not supported for this target
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:224: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
[yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
/usr/include/gnu/libc-version.h
After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.
Committer testing:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:401: *** No libasan found, please install libasan. Stop.
make[1]: *** [Makefile.perf:231: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
$
$ sudo dnf install libasan
<SNIP>
Installed:
libasan-9.3.1-2.fc31.x86_64
$
$
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
<SNIP>
CC /tmp/build/perf/util/pmu-flex.o
FLEX /tmp/build/perf/util/expr-flex.c
CC /tmp/build/perf/util/expr-bison.o
CC /tmp/build/perf/util/expr.o
CC /tmp/build/perf/util/expr-flex.o
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/parse-events.o
LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
INSTALL python-scripts
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
$
And if we rebuild without -fsanitize-address:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
CC /tmp/build/perf/exec-cmd.o
<SNIP>
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
$
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tiezhu yang <yangtiezhu@loongson.cn>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (VMware) [Tue, 24 Mar 2020 20:08:48 +0000 (16:08 -0400)]
tools lib traceevent: Add handler for __builtin_expect()
In order to move pointer checks like IS_ERR_VALUE() out of the hotpath
and into the reader path of a trace event, user space tools need to be
able to parse that. IS_ERR_VALUE() is defined as:
#define IS_ERR_VALUE() unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO)
Which eventually turns into:
__builtin_expect(!!((unsigned long)(void *)(x) >= (unsigned long)-4095), 0)
Now the traceevent parser can handle most of that except for the
__builtin_expect(), which needs to be added.
Link: https://lore.kernel.org/linux-mm/20200320055823.27089-3-jaewon31.kim@samsung.com/
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.821799393@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (VMware) [Tue, 24 Mar 2020 20:08:47 +0000 (16:08 -0400)]
tools lib traceevent: Handle __attribute__((user)) in field names
Commit
c61f13eaa1ee1 ("gcc-plugins: Add structleak for more stack
initialization") added "__attribute__((user))" to the user when
stackleak detector is enabled. This now appears in the field format of
system call trace events for system calls that have user buffers. The
"__attribute__((user))" breaks the parsing in libtraceevent. That needs
to be handled.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.663647256@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (VMware) [Tue, 24 Mar 2020 20:08:46 +0000 (16:08 -0400)]
tools lib traceevent: Add append() function helper for appending strings
There's several locations that open code realloc and strcat() to append
text to strings. Add an append() function that takes a delimiter and a
string to append to another string.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Lim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lore.kernel.org/lkml/20200324200956.515118403@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will Deacon [Fri, 29 May 2020 13:12:18 +0000 (14:12 +0100)]
arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
Unprivileged memory accesses generated by the so-called "translated"
instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire
unexpectedly if kernel debugging is enabled. In such cases, the
hw_breakpoint logic will invoke the user overflow handler which will
typically raise a SIGTRAP back to the current task. This is futile when
returning back to the kernel because (a) the signal won't have been
delivered and (b) userspace can't handle the thing anyway.
Avoid invoking the user overflow handler for watchpoints triggered by
kernel uaccess routines, and instead single-step over the faulting
instruction as we would if no overflow handler had been installed.
(Fixes tag identifies the introduction of unprivileged memory accesses,
which exposed this latent bug in the hw_breakpoint code)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Fixes:
57f4959bad0a ("arm64: kernel: Add support for User Access Override")
Reported-by: Luis Machado <luis.machado@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Gustavo A. R. Silva [Wed, 17 Jun 2020 21:34:07 +0000 (16:34 -0500)]
arm64: kexec_file: Use struct_size() in kmalloc()
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200617213407.GA1385@embeddedor
Signed-off-by: Will Deacon <will@kernel.org>
Barry Song [Wed, 17 Jun 2020 21:58:28 +0000 (09:58 +1200)]
arm64: mm: reserve hugetlb CMA after numa_init
hugetlb_cma_reserve() is called at the wrong place. numa_init has not been
done yet. so all reserved memory will be located at node0.
Fixes:
cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200617215828.25296-1-song.bao.hua@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Linus Torvalds [Wed, 17 Jun 2020 18:29:37 +0000 (11:29 -0700)]
Merge tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fixes for the SEV atomic pool (Geert Uytterhoeven and David Rientjes)"
* tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: decouple DMA_REMAP from DMA_COHERENT_POOL
dma-pool: fix too large DMA pools on medium memory size systems
Christoph Hellwig [Wed, 17 Jun 2020 07:37:54 +0000 (09:37 +0200)]
maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault
Better describe what these functions do.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Wed, 17 Jun 2020 07:37:53 +0000 (09:37 +0200)]
maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault
Better describe what these functions do.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnaldo Carvalho de Melo [Wed, 17 Jun 2020 13:23:51 +0000 (10:23 -0300)]
tools headers UAPI: Sync linux/fs.h with the kernel sources
To pick the changes from:
b383a73f2b83 ("fs/ext4: Introduce DAX inode flag")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
It causes various beautifiers for things like fspick, fsmount, etc (see
below) to get rebuilt, but this specific change doesn't make 'perf
trace' be capable of decoding anything new, as we still don't decode
what comes from ioctls, just its cmds.
Details about the update:
$ cp include/uapi/linux/fs.h tools/include/uapi/linux/fs.h
$ git diff
diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h
index
379a612f8f1d..
f44eb0a04afd 100644
--- a/tools/include/uapi/linux/fs.h
+++ b/tools/include/uapi/linux/fs.h
@@ -262,6 +262,7 @@ struct fsxattr {
#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_DAX_FL 0x02000000 /* Inode is DAX */
#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */
$ m
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
INSTALL GTK UI
CC /tmp/build/perf/builtin-trace.o
DESCEND plugins
CC /tmp/build/perf/trace/beauty/fsmount.o
CC /tmp/build/perf/trace/beauty/fspick.o
CC /tmp/build/perf/trace/beauty/mount_flags.o
CC /tmp/build/perf/trace/beauty/move_mount.o
CC /tmp/build/perf/trace/beauty/renameat.o
CC /tmp/build/perf/trace/beauty/sync_file_range.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 17 Jun 2020 13:16:53 +0000 (10:16 -0300)]
tools include UAPI: Sync linux/vhost.h with the kernel sources
To get the changes in:
776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
This automatically picks the new ioctl introduced in the above patch,
making tools such as 'perf trace' aware of them and possibly allowing to
use the strings in filters, etc:
# perf trace -e ioctl --pid 7951
<SNIP>
0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0
370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0
<SNIP>
#
Details about the update:
$ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
--- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.
056763843 -0300
+++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.
532056428 -0300
@@ -15,6 +15,8 @@
#include <linux/types.h>
#include <linux/ioctl.h>
+#define VHOST_FILE_UNBIND -1
+
/* ioctls */
#define VHOST_VIRTIO 0xAF
@@ -140,4 +142,6 @@
/* Get the max ring size. */
#define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16)
+/* Set event fd for config interrupt*/
+#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int)
#endif
$
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2020-06-17 10:15:35.
123275966 -0300
+++ after 2020-06-17 10:15:51.
812482117 -0300
@@ -27,6 +27,7 @@
[0x72] = "VDPA_SET_STATUS",
[0x74] = "VDPA_SET_CONFIG",
[0x75] = "VDPA_SET_VRING_ENABLE",
+ [0x77] = "VDPA_SET_CONFIG_CALL",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
$
This causes these parts to get rebuilt:
CC /tmp/build/perf/trace/beauty/ioctl.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 17 Jun 2020 13:07:59 +0000 (10:07 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
7e5b3c267d25 ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation")
Addressing these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
With this one will be able to use these new AMD MSRs in filters, by
name, e.g.:
# perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
^C#
Using -v we can see how it sets up the tracepoint filters, converting
from the string in the filter to the numeric value:
# perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
Using CPUID GenuineIntel-6-8E-A
0x123
New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
mmap size 528384B
^C#
The updating process shows how this affects tooling in more detail:
$ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
--- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.
959910238 -0300
+++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.
235052901 -0300
@@ -128,6 +128,10 @@
#define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */
#define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */
+/* SRBDS support */
+#define MSR_IA32_MCU_OPT_CTRL 0x00000123
+#define RNGDS_MITG_DIS BIT(0)
+
#define MSR_IA32_SYSENTER_CS 0x00000174
#define MSR_IA32_SYSENTER_ESP 0x00000175
#define MSR_IA32_SYSENTER_EIP 0x00000176
$ set -o vi
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2020-06-17 10:05:49.
653114752 -0300
+++ after 2020-06-17 10:06:01.
777258731 -0300
@@ -51,6 +51,7 @@
[0x0000011e] = "IA32_BBL_CR_CTL3",
[0x00000120] = "IDT_MCR_CTRL",
[0x00000122] = "IA32_TSX_CTRL",
+ [0x00000123] = "IA32_MCU_OPT_CTRL",
[0x00000140] = "MISC_FEATURES_ENABLES",
[0x00000174] = "IA32_SYSENTER_CS",
[0x00000175] = "IA32_SYSENTER_ESP",
$
The related change to cpu-features.h affects this:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
This shouldn't be affecting that 'perf bench' entry:
$ find tools/perf/ -type f | xargs grep SRBDS
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 17 Jun 2020 16:20:14 +0000 (13:20 -0300)]
Merge remote-tracking branch 'torvalds/master' into perf/urgent
To get some newer headers that got out of sync with the copies in tools/
so that we can try to have the tools/perf/ build clean for v5.8 with
fewer pull requests.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Milian Wolff [Fri, 12 Jun 2020 23:03:33 +0000 (01:03 +0200)]
perf script: Initialize zstd_data
Fixes segmentation fault when trying to interpret zstd-compressed data
with perf script:
```
$ perf record -z ls
...
[ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ]
$ memcheck perf script
...
==67911== Invalid read of size 4
==67911== at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5)
==67911== by 0x6E726B: zstd_decompress_stream (zstd.c:100)
==67911== by 0x65729C: perf_session__process_compressed_event (session.c:72)
==67911== by 0x6598E8: perf_session__process_user_event (session.c:1583)
==67911== by 0x65BA59: reader__process_events (session.c:2177)
==67911== by 0x65BA59: __perf_session__process_events (session.c:2234)
==67911== by 0x65BA59: perf_session__process_events (session.c:2267)
==67911== by 0x5A7397: __cmd_script (builtin-script.c:2447)
==67911== by 0x5A7397: cmd_script (builtin-script.c:3840)
==67911== by 0x5FE9D2: run_builtin (perf.c:312)
==67911== by 0x711627: handle_internal_command (perf.c:364)
==67911== by 0x711627: run_argv (perf.c:408)
==67911== by 0x711627: main (perf.c:538)
==67911== Address 0x71d8 is not stack'd, malloc'd or (recently) free'd
```
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference:
20200612230333.72140-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will Deacon [Tue, 16 Jun 2020 18:03:49 +0000 (19:03 +0100)]
arm64: bti: Require clang >= 10.0.1 for in-kernel BTI support
Unfortunately, most versions of clang that support BTI are capable of
miscompiling the kernel when converting a switch statement into a jump
table. As an example, attempting to spawn a KVM guest results in a panic:
[ 56.253312] Kernel panic - not syncing: bad mode
[ 56.253834] CPU: 0 PID: 279 Comm: lkvm Not tainted 5.8.0-rc1 #2
[ 56.254225] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[ 56.254712] Call trace:
[ 56.254952] dump_backtrace+0x0/0x1d4
[ 56.255305] show_stack+0x1c/0x28
[ 56.255647] dump_stack+0xc4/0x128
[ 56.255905] panic+0x16c/0x35c
[ 56.256146] bad_el0_sync+0x0/0x58
[ 56.256403] el1_sync_handler+0xb4/0xe0
[ 56.256674] el1_sync+0x7c/0x100
[ 56.256928] kvm_vm_ioctl_check_extension_generic+0x74/0x98
[ 56.257286] __arm64_sys_ioctl+0x94/0xcc
[ 56.257569] el0_svc_common+0x9c/0x150
[ 56.257836] do_el0_svc+0x84/0x90
[ 56.258083] el0_sync_handler+0xf8/0x298
[ 56.258361] el0_sync+0x158/0x180
This is because the switch in kvm_vm_ioctl_check_extension_generic()
is executed as an indirect branch to tail-call through a jump table:
ffff800010032dc8:
3869694c ldrb w12, [x10, x9]
ffff800010032dcc:
8b0c096b add x11, x11, x12, lsl #2
ffff800010032dd0:
d61f0160 br x11
However, where the target case uses the stack, the landing pad is elided
due to the presence of a paciasp instruction:
ffff800010032e14:
d503233f paciasp
ffff800010032e18:
a9bf7bfd stp x29, x30, [sp, #-16]!
ffff800010032e1c:
910003fd mov x29, sp
ffff800010032e20:
aa0803e0 mov x0, x8
ffff800010032e24:
940017c0 bl
ffff800010038d24 <kvm_vm_ioctl_check_extension>
ffff800010032e28:
93407c00 sxtw x0, w0
ffff800010032e2c:
a8c17bfd ldp x29, x30, [sp], #16
ffff800010032e30:
d50323bf autiasp
ffff800010032e34:
d65f03c0 ret
Unfortunately, this results in a fatal exception because paciasp is
compatible only with branch-and-link (call) instructions and not simple
indirect branches.
A fix is being merged into Clang 10.0.1 so that a 'bti j' instruction is
emitted as an explicit landing pad in this situation. Make in-kernel
BTI depend on that compiler version when building with clang.
Cc: Tom Stellard <tstellar@redhat.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20200615105524.GA2694@willie-the-truck
Link: https://lore.kernel.org/r/20200616183630.2445-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Gustavo A. R. Silva [Tue, 9 Jun 2020 01:22:33 +0000 (20:22 -0500)]
overflow.h: Add flex_array_size() helper
Add flex_array_size() helper for the calculation of the size, in bytes,
of a flexible array member contained within an enclosing structure.
Example of usage:
struct something {
size_t count;
struct foo items[];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
memcpy(instance->items, src, flex_array_size(instance, items, instance->count));
The helper returns SIZE_MAX on overflow instead of wrapping around.
Additionally replaces parameter "n" with "count" in struct_size() helper
for greater clarity and unification.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200609012233.GA3371@embeddedor
Signed-off-by: Kees Cook <keescook@chromium.org>
Linus Torvalds [Wed, 17 Jun 2020 00:44:54 +0000 (17:44 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo,
fix from Stefano Brivio.
2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso.
3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang.
4) Accidently disabling NAPI in non-error paths of macb_open(), from
Charles Keepax.
5) Fix races between alx_stop and alx_remove, from Zekun Shen.
6) We forget to re-enable SRIOV during resume in bnxt_en driver, from
Michael Chan.
7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai.
8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen.
9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei
Yongjun.
10) We should not adjust the TCP window advertised when sending dup acks
in non-SACK mode, because it won't be counted as a dup by the sender
if the window size changes. From Eric Dumazet.
11) Destroy the right number of queues during remove in mvpp2 driver,
from Sven Auhagen.
12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav
Gupta, and Arnd Bergmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
e1000e: fix unused-function warning
e1000: use generic power management
e1000e: Do not wake up the system via WOL if device wakeup is disabled
lan743x: add MODULE_DEVICE_TABLE for module loading alias
mlxsw: spectrum: Adjust headroom buffers for 8x ports
bareudp: Fixed configuration to avoid having garbage values
mvpp2: remove module bugfix
tcp: grow window for OOO packets only for SACK flows
mptcp: fix memory leak in mptcp_subflow_create_socket()
netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline
net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline
net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles
mvpp2: ethtool rxtx stats fix
MAINTAINERS: switch to my private email for Renesas Ethernet drivers
rocker: fix incorrect error handling in dma_rings_init
test_objagg: Fix potential memory leak in error handling
net: ethernet: mtk-star-emac: simplify interrupt handling
mld: fix memory leak in ipv6_mc_destroy_dev()
bnxt_en: Return from timer if interface is not in open state.
bnxt_en: Fix AER reset logic on 57500 chips.
...
Linus Torvalds [Wed, 17 Jun 2020 00:40:51 +0000 (17:40 -0700)]
Merge tag 'afs-fixes-
20200616' of git://git./linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"I've managed to get xfstests kind of working with afs. Here are a set
of patches that fix most of the bugs found.
There are a number of primary issues:
- Incorrect handling of mtime and non-handling of ctime. It might be
argued, that the latter isn't a bug since the AFS protocol doesn't
support ctime, but I should probably still update it locally.
- Shared-write mmap, truncate and writeback bugs. This includes not
changing i_size under the callback lock, overwriting local i_size
with the reply from the server after a partial writeback, not
limiting the writeback from an mmapped page to EOF.
- Checks for an abort code indicating that the primary vnode in an
operation was deleted by a third-party are done in the wrong place.
- Silly rename bugs. This includes an incomplete conversion to the
new operation handling, duplicate nlink handling, nlink changing
not being done inside the callback lock and insufficient handling
of third-party conflicting directory changes.
And some secondary ones:
- The UAEOVERFLOW abort code should map to EOVERFLOW not EREMOTEIO.
- Remove a couple of unused or incompletely used bits.
- Remove a couple of redundant success checks.
These seem to fix all the data-corruption bugs found by
./check -afs -g quick
along with the obvious silly rename bugs and time bugs.
There are still some test failures, but they seem to fall into two
classes: firstly, the authentication/security model is different to
the standard UNIX model and permission is arbitrated by the server and
cached locally; and secondly, there are a number of features that AFS
does not support (such as mknod). But in these cases, the tests
themselves need to be adapted or skipped.
Using the in-kernel afs client with xfstests also found a bug in the
AuriStor AFS server that has been fixed for a future release"
* tag 'afs-fixes-
20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix silly rename
afs: afs_vnode_commit_status() doesn't need to check the RPC error
afs: Fix use of afs_check_for_remote_deletion()
afs: Remove afs_operation::abort_code
afs: Fix yfs_fs_fetch_status() to honour vnode selector
afs: Remove yfs_fs_fetch_file_status() as it's not used
afs: Fix the mapping of the UAEOVERFLOW abort code
afs: Fix truncation issues and mmap writeback size
afs: Concoct ctimes
afs: Fix EOF corruption
afs: afs_write_end() should change i_size under the right lock
afs: Fix non-setting of mtime when writing into mmap
Randy Dunlap [Mon, 15 Jun 2020 02:59:07 +0000 (19:59 -0700)]
Documentation: remove SH-5 index entries
Remove SH-5 documentation index entries following the removal
of SH-5 source code.
Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h
Fixes:
3b69e8b45711 ("Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Rich Felker <dalias@libc.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: ysato@users.sourceforge.jp
Cc: linux-sh@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 17 Jun 2020 00:23:57 +0000 (17:23 -0700)]
Merge tag 'flex-array-conversions-5.8-rc2' of git://git./linux/kernel/git/gustavoars/linux
Pull flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members.
Notice that all of these patches have been baking in linux-next for
two development cycles now.
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should no
longer be used[2].
C99 introduced “flexible array members”, which lacks a numeric size
for the array declaration entirely:
struct something {
size_t count;
struct foo items[];
};
This is the way the kernel expects dynamically sized trailing elements
to be declared. It allows the compiler to generate errors when the
flexible array does not occur last in the structure, which helps to
prevent some kind of undefined behavior[3] bugs from being
inadvertently introduced to the codebase.
It also allows the compiler to correctly analyze array sizes (via
sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For
instance, there is no mechanism that warns us that the following
application of the sizeof() operator to a zero-length array always
results in zero:
struct something {
size_t count;
struct foo items[0];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items) * instance->count;
memcpy(instance->items, source, size);
At the last line of code above, size turns out to be zero, when one
might have thought it represents the total size in bytes of the
dynamic memory recently allocated for the trailing array items. Here
are a couple examples of this issue[4][5].
Instead, flexible array members have incomplete type, and so the
sizeof() operator may not be applied[6], so any misuse of such
operators will be immediately noticed at build time.
The cleanest and least error-prone way to implement this is through
the use of a flexible array member:
struct something {
size_t count;
struct foo items[];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items[0]) * instance->count;
memcpy(instance->items, source, size);
instead"
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
[3] commit
76497732932f ("cxgb3/l2t: Fix undefined behaviour")
[4] commit
f2cd32a443da ("rndis_wlan: Remove logically dead code")
[5] commit
ab91c2a89f86 ("tpm: eventlog: Replace zero-length array with flexible-array member")
[6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
* tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (41 commits)
w1: Replace zero-length array with flexible-array
tracing/probe: Replace zero-length array with flexible-array
soc: ti: Replace zero-length array with flexible-array
tifm: Replace zero-length array with flexible-array
dmaengine: tegra-apb: Replace zero-length array with flexible-array
stm class: Replace zero-length array with flexible-array
Squashfs: Replace zero-length array with flexible-array
ASoC: SOF: Replace zero-length array with flexible-array
ima: Replace zero-length array with flexible-array
sctp: Replace zero-length array with flexible-array
phy: samsung: Replace zero-length array with flexible-array
RxRPC: Replace zero-length array with flexible-array
rapidio: Replace zero-length array with flexible-array
media: pwc: Replace zero-length array with flexible-array
firmware: pcdp: Replace zero-length array with flexible-array
oprofile: Replace zero-length array with flexible-array
block: Replace zero-length array with flexible-array
tools/testing/nvdimm: Replace zero-length array with flexible-array
libata: Replace zero-length array with flexible-array
kprobes: Replace zero-length array with flexible-array
...
Arvind Sankar [Tue, 16 Jun 2020 22:25:47 +0000 (18:25 -0400)]
x86/purgatory: Add -fno-stack-protector
The purgatory Makefile removes -fstack-protector options if they were
configured in, but does not currently add -fno-stack-protector.
If gcc was configured with the --enable-default-ssp configure option,
this results in the stack protector still being enabled for the
purgatory (absent distro-specific specs files that might disable it
again for freestanding compilations), if the main kernel is being
compiled with stack protection enabled (if it's disabled for the main
kernel, the top-level Makefile will add -fno-stack-protector).
This will break the build since commit
e4160b2e4b02 ("x86/purgatory: Fail the build if purgatory.ro has missing symbols")
and prior to that would have caused runtime failure when trying to use
kexec.
Explicitly add -fno-stack-protector to avoid this, as done in other
Makefiles that need to disable the stack protector.
Reported-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Tue, 16 Jun 2020 23:16:24 +0000 (16:16 -0700)]
Merge branch '1GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-06-16
This series contains fixes to e1000 and e1000e.
Chen fixes an e1000e issue where systems could be waken via WoL, even
though the user has disabled the wakeup bit via sysfs.
Vaibhav Gupta updates the e1000 driver to clean up the legacy Power
Management hooks.
Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP
preprocessor tags, which also resolves the compiler warnings about the
possibility of unused structure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 27 May 2020 13:47:00 +0000 (15:47 +0200)]
e1000e: fix unused-function warning
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent,
leading to a warning about sometimes unused function:
drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function]
Rather than adding more #ifdefs, just remove them completely
and mark the PM functions as __maybe_unused to let the compiler
work it out on it own.
Fixes:
e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Vaibhav Gupta [Mon, 25 May 2020 12:27:10 +0000 (17:57 +0530)]
e1000: use generic power management
With legacy PM hooks, it was the responsibility of a driver to manage PCI
states and also the device's power state. The generic approach is to let PCI
core handle the work.
e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks.
__e1000_shutdown() modifies the value of "wake" (device should be wakeup
enabled or not), responsible for controlling the flow of legacy PM.
Since, PCI core has no idea about the value of "wake", new code for generic
PM may produce unexpected results. Thus, use "device_set_wakeup_enable()"
to wakeup-enable the device accordingly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Chen Yu [Thu, 21 May 2020 17:59:00 +0000 (01:59 +0800)]
e1000e: Do not wake up the system via WOL if device wakeup is disabled
Currently the system will be woken up via WOL(Wake On LAN) even if the
device wakeup ability has been disabled via sysfs:
cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup
disabled
The system should not be woken up if the user has explicitly
disabled the wake up ability for this device.
This patch clears the WOL ability of this network device if the
user has disabled the wake up ability in sysfs.
Fixes:
bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver")
Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tim Harvey [Tue, 16 Jun 2020 15:31:58 +0000 (08:31 -0700)]
lan743x: add MODULE_DEVICE_TABLE for module loading alias
Without a MODULE_DEVICE_TABLE the attributes are missing that create
an alias for auto-loading the module in userspace via hotplug.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Mon, 15 Jun 2020 16:36:58 +0000 (17:36 +0100)]
afs: Fix silly rename
Fix AFS's silly rename by the following means:
(1) Set the destination directory in afs_do_silly_rename() so as to avoid
misbehaviour and indicate that the directory data version will
increment by 1 so as to avoid warnings about unexpected changes in the
DV. Also indicate that the ctime should be updated to avoid xfstest
grumbling.
(2) Note when the server indicates that a directory changed more than we
expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a
third party change, checking on successful completion of unlink and
rename.
The problem is that the FS.RemoveFile RPC op doesn't report the status
of the unlinked file, though YFS.RemoveFile2 does. This can be
mitigated by the assumption that if the directory DV cranked by
exactly 1, we can be sure we removed one link from the file; further,
ordinarily in AFS, files cannot be hardlinked across directories, so
if we reduce nlink to 0, the file is deleted.
However, if the directory DV jumps by more than 1, we cannot know if a
third party intervened by adding or removing a link on the file we
just removed a link from.
The same also goes for any vnode that is at the destination of the
FS.Rename RPC op.
(3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock
section along with the other attribute updates if ->op_unlinked is set
on the descriptor for the appropriate vnode.
(4) Issue a follow up status fetch to the unlinked file in the event of a
third party conflict that makes it impossible for us to know if we
actually deleted the file or not.
(5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to
the user about the nlink of a silly deleted file so that it appears as
0, not 1.
Found with the generic/035 and generic/084 xfstests.
Fixes:
e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Ido Schimmel [Tue, 16 Jun 2020 07:14:58 +0000 (10:14 +0300)]
mlxsw: spectrum: Adjust headroom buffers for 8x ports
The port's headroom buffers are used to store packets while they
traverse the device's pipeline and also to store packets that are egress
mirrored.
On Spectrum-3, ports with eight lanes use two headroom buffers between
which the configured headroom size is split.
In order to prevent packet loss, multiply the calculated headroom size
by two for 8x ports.
Fixes:
da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin [Tue, 16 Jun 2020 05:48:58 +0000 (11:18 +0530)]
bareudp: Fixed configuration to avoid having garbage values
Code to initialize the conf structure while gathering the configuration
of the device was missing.
Fixes:
571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Martin <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Auhagen [Tue, 16 Jun 2020 04:35:29 +0000 (06:35 +0200)]
mvpp2: remove module bugfix
The remove function does not destroy all
BM Pools when per cpu pool is active.
When reloading the mvpp2 as a module the BM Pools
are still active in hardware and due to the bug
have twice the size now old + new.
This eventually leads to a kernel crash.
v2:
* add Fixes tag
Fixes:
7d04b0b13b11 ("mvpp2: percpu buffers")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 16 Jun 2020 03:37:07 +0000 (20:37 -0700)]
tcp: grow window for OOO packets only for SACK flows
Back in 2013, we made a change that broke fast retransmit
for non SACK flows.
Indeed, for these flows, a sender needs to receive three duplicate
ACK before starting fast retransmit. Sending ACK with different
receive window do not count.
Even if enabling SACK is strongly recommended these days,
there still are some cases where it has to be disabled.
Not increasing the window seems better than having to
rely on RTO.
After the fix, following packetdrill test gives :
// Initialize connection
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 8>
+0 < . 1:1(0) ack 1 win 514
+0 accept(3, ..., ...) = 4
+0 < . 1:1001(1000) ack 1 win 514
// Quick ack
+0 > . 1:1(0) ack 1001 win 264
+0 < . 2001:3001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 3001:4001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 4001:5001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 1001:2001(1000) ack 1 win 514
// Hole is repaired.
+0 > . 1:1(0) ack 5001 win 272
Fixes:
4e4f1fc22681 ("tcp: properly increase rcv_ssthresh for ofo packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 16 Jun 2020 18:07:02 +0000 (11:07 -0700)]
Merge tag 'mfd-fixes-5.8' of git://git./linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
"Fix NULL pointer dereference in mt6360 driver"
* tag 'mfd-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: mt6360: Fix register driver NULL pointer by adding driver name
Will Deacon [Tue, 16 Jun 2020 17:29:11 +0000 (18:29 +0100)]
arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n
When I squashed the 'allnoconfig' compiler warning about the
set_sve_default_vl() function being defined but not used in commit
1e570f512cbd ("arm64/sve: Eliminate data races on sve_default_vl"), I
accidentally broke the build for configs where ARM64_SVE is enabled, but
SYSCTL is not.
Fix this by only compiling the SVE sysctl support if both CONFIG_SVE=y
and CONFIG_SYSCTL=y.
Cc: Dave Martin <Dave.Martin@arm.com>
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200616131808.GA1040@lca.pw
Signed-off-by: Will Deacon <will@kernel.org>
Will Deacon [Mon, 15 Jun 2020 15:27:43 +0000 (16:27 +0100)]
arm64: pgtable: Clear the GP bit for non-executable kernel pages
Commit
cca98e9f8b5e ("mm: enforce that vmap can't map pages executable")
introduced 'pgprot_nx(prot)' for arm64 but collided silently with the
BTI support during the merge window, which endeavours to clear the GP
bit for non-executable kernel mappings in set_memory_nx().
For consistency between the two APIs, clear the GP bit in pgprot_nx().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200615154642.3579-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
David Howells [Mon, 15 Jun 2020 23:52:30 +0000 (00:52 +0100)]
afs: afs_vnode_commit_status() doesn't need to check the RPC error
afs_vnode_commit_status() is only ever called if op->error is 0, so remove
the op->error checks from the function.
Fixes:
e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 15 Jun 2020 23:34:09 +0000 (00:34 +0100)]
afs: Fix use of afs_check_for_remote_deletion()
afs_check_for_remote_deletion() checks to see if error ENOENT is returned
by the server in response to an operation and, if so, marks the primary
vnode as having been deleted as the FID is no longer valid.
However, it's being called from the operation success functions, where no
abort has happened - and if an inline abort is recorded, it's handled by
afs_vnode_commit_status().
Fix this by actually calling the operation aborted method if provided and
having that point to afs_check_for_remote_deletion().
Fixes:
e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 15 Jun 2020 23:25:56 +0000 (00:25 +0100)]
afs: Remove afs_operation::abort_code
Remove afs_operation::abort_code as it's read but never set. Use
ac.abort_code instead.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 15 Jun 2020 23:23:12 +0000 (00:23 +0100)]
afs: Fix yfs_fs_fetch_status() to honour vnode selector
Fix yfs_fs_fetch_status() to honour the vnode selector in
op->fetch_status.which as does afs_fs_fetch_status() that allows
afs_do_lookup() to use this as an alternative to the InlineBulkStatus RPC
call if not implemented by the server.
This doesn't matter in the current code as YFS servers always implement
InlineBulkStatus, but a subsequent will call it on YFS servers too in some
circumstances.
Fixes:
e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 15 Jun 2020 23:18:09 +0000 (00:18 +0100)]
afs: Remove yfs_fs_fetch_file_status() as it's not used
Remove yfs_fs_fetch_file_status() as it's no longer used.
Signed-off-by: David Howells <dhowells@redhat.com>
Gene Chen [Mon, 8 Jun 2020 09:38:45 +0000 (17:38 +0800)]
mfd: mt6360: Fix register driver NULL pointer by adding driver name
The driver name was accidentally removed when .probe() by was replaced
by .probe_new() during an early patch review.
[ 121.243012] EAX:
c2a8bc64 EBX:
00000000 ECX:
00000000 EDX:
00000000
[ 121.243012] ESI:
c2a8bc79 EDI:
00000000 EBP:
e54bdea8 ESP:
e54bdea0
[ 121.243012] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS:
00010286
[ 121.243012] CR0:
80050033 CR2:
00000000 CR3:
02ec3000 CR4:
000006b0
[ 121.243012] Call Trace:
[ 121.243012] kset_find_obj+0x3d/0xc0
[ 121.243012] driver_find+0x16/0x40
[ 121.243012] driver_register+0x49/0x100
[ 121.243012] ? i2c_for_each_dev+0x39/0x50
[ 121.243012] ? __process_new_adapter+0x20/0x20
[ 121.243012] ? cht_wc_driver_init+0x11/0x11
[ 121.243012] i2c_register_driver+0x30/0x80
[ 121.243012] ? intel_lpss_pci_driver_init+0x16/0x16
[ 121.243012] mt6360_pmu_driver_init+0xf/0x11
[ 121.243012] do_one_initcall+0x33/0x1a0
[ 121.243012] ? parse_args+0x1eb/0x3d0
[ 121.243012] ? __might_sleep+0x31/0x90
[ 121.243012] ? kernel_init_freeable+0x10a/0x17f
[ 121.243012] kernel_init_freeable+0x12c/0x17f
[ 121.243012] ? rest_init+0x110/0x110
[ 121.243012] kernel_init+0xb/0x100
[ 121.243012] ? schedule_tail_wrapper+0x9/0xc
[ 121.243012] ret_from_fork+0x19/0x24
[ 121.243012] Modules linked in:
[ 121.243012] CR2:
0000000000000000
[ 121.243012] random: get_random_bytes called from init_oops_id+0x3a/0x40 with crng_init=0
[ 121.243012] ---[ end trace
38a803400f1a2bee ]---
[ 121.243012] EIP: strcmp+0x11/0x30
Fixes:
7edd363421dab ("mfd: Add support for PMIC MT6360")
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
[Lee: Taking the opportunity to fix the compatible string too 's/_/-/']
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
w1: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
tracing/probe: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
soc: ti: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
tifm: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
dmaengine: tegra-apb: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
stm class: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
Squashfs: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
ASoC: SOF: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
ima: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
sctp: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
phy: samsung: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
RxRPC: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
rapidio: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
media: pwc: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
firmware: pcdp: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
oprofile: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
block: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
tools/testing/nvdimm: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
libata: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
kprobes: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
keys: encrypted-type: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
kexec: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
KVM: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
jffs2: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
ibft: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
samples: mei: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
ia64: kernel: unwind_i.h: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
FS-Cache: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
firewire: ohci: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
cb710: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
drm/edid: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
drbd: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
crypto: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
can: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
can: peak_canfd: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
dmaengine: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
ARM: tegra: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Thu, 28 May 2020 14:35:11 +0000 (09:35 -0500)]
aio: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Fri, 21 Feb 2020 15:32:33 +0000 (09:32 -0600)]
firmware: google: vpd: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Fri, 21 Feb 2020 15:30:21 +0000 (09:30 -0600)]
firmware: google: memconsole: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Fri, 21 Feb 2020 15:15:44 +0000 (09:15 -0600)]
firmware: dmi-sysfs: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Wei Yongjun [Mon, 15 Jun 2020 01:35:22 +0000 (09:35 +0800)]
mptcp: fix memory leak in mptcp_subflow_create_socket()
socket malloced by sock_create_kern() should be release before return
in the error handling, otherwise it cause memory leak.
unreferenced object 0xffff88810910c000 (size 1216):
comm "00000003_test_m", pid 12238, jiffies
4295050289 (age 54.237s)
hex dump (first 32 bytes):
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 2f 30 0a 81 88 ff ff ........./0.....
backtrace:
[<
00000000e877f89f>] sock_alloc_inode+0x18/0x1c0
[<
0000000093d1dd51>] alloc_inode+0x63/0x1d0
[<
000000005673fec6>] new_inode_pseudo+0x14/0xe0
[<
00000000b5db6be8>] sock_alloc+0x3c/0x260
[<
00000000e7e3cbb2>] __sock_create+0x89/0x620
[<
0000000023e48593>] mptcp_subflow_create_socket+0xc0/0x5e0
[<
00000000419795e4>] __mptcp_socket_create+0x1ad/0x3f0
[<
00000000b2f942e8>] mptcp_stream_connect+0x281/0x4f0
[<
00000000c80cd5cc>] __sys_connect_file+0x14d/0x190
[<
00000000dc761f11>] __sys_connect+0x128/0x160
[<
000000008b14e764>] __x64_sys_connect+0x6f/0xb0
[<
000000007b4f93bd>] do_syscall_64+0xa1/0x530
[<
00000000d3e770b6>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes:
2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 16 Jun 2020 01:06:52 +0000 (18:06 -0700)]
Merge branch 'remove-dependency-between-mlx5-act_ct-nf_flow_table'
Roi Dayan says:
====================
remove dependency between mlx5, act_ct, nf_flow_table
Some exported functions from act_ct and nf_flow_table being used in mlx5_core.
This leads that mlx5 module always require act_ct and nf_flow_table modules.
Those small exported functions can be moved to the header files to
avoid this module dependency.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alaa Hleihel [Sun, 14 Jun 2020 11:12:49 +0000 (14:12 +0300)]
netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline
Currently, nf_flow_table_offload_add/del_cb are exported by nf_flow_table
module, therefore modules using them will have hard-dependency
on nf_flow_table and will require loading it all the time.
This can lead to an unnecessary overhead on systems that do not
use this API.
To relax the hard-dependency between the modules, we unexport these
functions and make them static inline.
Fixes:
978703f42549 ("netfilter: flowtable: Add API for registering to flow table events")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alaa Hleihel [Sun, 14 Jun 2020 11:12:48 +0000 (14:12 +0300)]
net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline
Currently, tcf_ct_flow_table_restore_skb is exported by act_ct
module, therefore modules using it will have hard-dependency
on act_ct and will require loading it all the time.
This can lead to an unnecessary overhead on systems that do not
use hardware connection tracking action (ct_metadata action) in
the first place.
To relax the hard-dependency between the modules, we unexport this
function and make it a static inline one.
Fixes:
30b0cf90c6dd ("net/sched: act_ct: Support restoring conntrack info on skbs")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Levin [Mon, 15 Jun 2020 22:24:27 +0000 (18:24 -0400)]
scripts/decode_stacktrace: warn when modpath is needed but is unset
When a user tries to parse a symbol located inside a module he must have
modpath set. Otherwise, decode_stacktrace won't be able to parse the
symbol correctly.
Right now the failure is silent and easily missed by the user. What's
worse is that by the time the user realizes what happened (or someone on
LKML asks him to add the modpath and re-run), he might have already got
rid of the vmlinux/modules.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Oltean [Sun, 14 Jun 2020 20:54:09 +0000 (23:54 +0300)]
net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles
It isn't actually described clearly at all in UM10944.pdf, but on TX of
a management frame (such as PTP), this needs to happen:
- The destination MAC address (i.e. 01-80-c2-00-00-0e), along with the
desired destination port, need to be installed in one of the 4
management slots of the switch, over SPI.
- The host can poll over SPI for that management slot's ENFPORT field.
That gets unset when the switch has matched the slot to the frame.
And therein lies the problem. ENFPORT does not mean that the packet has
been transmitted. Just that it has been received over the CPU port, and
that the mgmt slot is yet again available.
This is relevant because of what we are doing in sja1105_ptp_txtstamp_skb,
which is called right after sja1105_mgmt_xmit. We are in a hard
real-time deadline, since the hardware only gives us 24 bits of TX
timestamp, so we need to read the full PTP clock to reconstruct it.
Because we're in a hurry (in an attempt to make sure that we have a full
64-bit PTP time which is as close as possible to the actual transmission
time of the frame, to avoid 24-bit wraparounds), first we read the PTP
clock, then we poll for the TX timestamp to become available.
But of course, we don't know for sure that the frame has been
transmitted when we read the full PTP clock. We had assumed that ENFPORT
means it has, but the assumption is incorrect. And while in most
real-life scenarios this has never been caught due to software delays,
nowhere is this fact more obvious than with a tc-taprio offload, where
PTP traffic gets a small timeslot very rarely (example: 1 packet per 10
ms). In that case, we will be reading the PTP clock for timestamp
reconstruction too early (before the packet has been transmitted), and
this renders the reconstruction procedure incorrect (see the assumptions
described in the comments found on function sja1105_tstamp_reconstruct).
So the PTP TX timestamps will be off by 1<<24 clock ticks, or 135 ms
(1 tick is 8 ns).
So fix this case of premature optimization by simply reordering the
sja1105_ptpegr_ts_poll and the sja1105_ptpclkval_read function calls. It
turns out that in practice, the 135 ms hard deadline for PTP timestamp
wraparound is not so hard, since even the most bandwidth-intensive PTP
profiles, such as 802.1AS-2011, have a sync frame interval of 125 ms.
So if we couldn't deliver a timestamp in 135 ms (which we can), we're
toast and have much bigger problems anyway.
Fixes:
47ed985e97f5 ("net: dsa: sja1105: Add logic for TX timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Auhagen [Sun, 14 Jun 2020 07:19:17 +0000 (09:19 +0200)]
mvpp2: ethtool rxtx stats fix
The ethtool rx and tx queue statistics are reporting wrong values.
Fix reading out the correct ones.
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sat, 13 Jun 2020 20:59:30 +0000 (23:59 +0300)]
MAINTAINERS: switch to my private email for Renesas Ethernet drivers
I no longer work for Cogent Embedded (but my old email still works :-)),
and still would like to continue looking after the Renesas Ethernet drivers
and bindings. Let's switch to my private email.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aditya Pakki [Fri, 12 Jun 2020 20:27:55 +0000 (15:27 -0500)]
rocker: fix incorrect error handling in dma_rings_init
In rocker_dma_rings_init, the goto blocks in case of errors
caused by the functions rocker_dma_cmd_ring_waits_alloc() and
rocker_dma_ring_create() are incorrect. The patch fixes the
order consistent with cleanup in rocker_dma_rings_fini().
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aditya Pakki [Fri, 12 Jun 2020 20:01:54 +0000 (15:01 -0500)]
test_objagg: Fix potential memory leak in error handling
In case of failure of check_expect_hints_stats(), the resources
allocated by objagg_hints_get should be freed. The patch fixes
this issue.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bartosz Golaszewski [Thu, 11 Jun 2020 14:01:39 +0000 (16:01 +0200)]
net: ethernet: mtk-star-emac: simplify interrupt handling
During development we tried to make the interrupt handling as fine-grained
as possible with TX and RX interrupts being disabled/enabled independently
and the counter registers reset from workqueue context.
Unfortunately after thorough testing of current mainline, we noticed the
driver has become unstable under heavy load. While this is hard to
reproduce, it's quite consistent in the driver's current form.
This patch proposes to go back to the previous approach of doing all
processing in napi context with all interrupts masked in order to make the
driver usable in mainline linux. This doesn't impact the performance on
pumpkin boards at all and it's in line with what many ethernet drivers do
in mainline linux anyway.
At the same time we're adding a FIXME comment about the need to improve
the interrupt handling.
Fixes:
8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-rpi.git / log