x86/entry: Optimize local_db_save() for virt

Because DRn access is 'difficult' with virt; but the DR7 read is cheaper
than a cacheline miss on native, add a virt specific fast path to
local_db_save(), such that when breakpoints are not in use to avoid
touching DRn entirely.

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.187833200@infradead.org

x86/entry, mce: Disallow #DB during #MC

#MC is fragile as heck, don't tempt fate.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.131187767@infradead.org

x86/entry, nmi: Disable #DB

Instead of playing stupid games with IST stacks, fully disallow #DB
during NMIs. There is absolutely no reason to allow them, and killing
this saves a heap of trouble.

#DB is already forbidden on noinstr and CEA, so there can't be a #DB before
this. Disabling it right after nmi_enter() ensures that the full NMI code
is protected.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.069223695@infradead.org

x86/entry: Introduce local_db_{save,restore}()

In order to allow other exceptions than #DB to disable breakpoints,
provide common helpers.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200529213321.012060983@infradead.org

x86/hw_breakpoint: Prevent data breakpoints on user_pcid_flush_mask

The per-CPU user_pcid_flush_mask is used in the low level entry code. A
data breakpoint can cause #DB recursion.

Protect the full cpu_tlbstate structure for simplicity.

Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200526014221.2119-5-laijs@linux.alibaba.com
Link: https://lkml.kernel.org/r/20200529213320.955117574@infradead.org

x86/hw_breakpoint: Prevent data breakpoints on per_cpu cpu_tss_rw

cpu_tss_rw is not directly referenced by hardware, but cpu_tss_rw is
accessed in CPU entry code, especially when #DB shifts its stacks.

If a data breakpoint would be set on cpu_tss_rw.x86_tss.ist[IST_INDEX_DB],
it would cause recursive #DB ending up in a double fault.

Add it to the list of protected items.

Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200526014221.2119-4-laijs@linux.alibaba.com
Link: https://lkml.kernel.org/r/20200529213320.897976479@infradead.org

x86/hw_breakpoint: Prevent data breakpoints on direct GDT

A data breakpoint on the GDT can be fatal and must be avoided.  The GDT in
the CPU entry area is already protected, but not the direct GDT.

Add the necessary protection.

Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200526014221.2119-3-laijs@linux.alibaba.com
Link: https://lkml.kernel.org/r/20200529213320.840953950@infradead.org

x86/hw_breakpoint: Add within_area() to check data breakpoints

Add a within_area() helper to checking whether the data breakpoints overlap
with cpu_entry_area.

It will be used to completely prevent data breakpoints on GDT, IDT, or TSS.

Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200526014221.2119-2-laijs@linux.alibaba.com
Link: https://lkml.kernel.org/r/20200529213320.784524504@infradead.org

xen: Move xen_setup_callback_vector() definition to include/xen/hvm.h

Kbuild test robot reports the following problem on ARM:

  for 'xen_setup_callback_vector' [-Wmissing-prototypes]
1664 | void xen_setup_callback_vector(void) {}
|      ^~~~~~~~~~~~~~~~~~~~~~~~~

The problem is that xen_setup_callback_vector is a x86 only thing, its
definition is present in arch/x86/xen/xen-ops.h but not on ARM. In
events_base.c there is a stub for !CONFIG_XEN_PVHVM but it is not declared
as 'static'.

On x86 the situation is hardly better: drivers/xen/events/events_base.c
doesn't include 'xen-ops.h' from arch/x86/xen/, it includes its namesake
from include/xen/ which also results in a 'no previous prototype' warning.

Currently, xen_setup_callback_vector() has two call sites: one in
drivers/xen/events_base.c and another in arch/x86/xen/suspend_hvm.c. The
former is placed under #ifdef CONFIG_X86 and the later is only compiled
in when CONFIG_XEN_PVHVM.

Resolve the issue by moving xen_setup_callback_vector() declaration to
arch neutral 'include/xen/hvm.h' as the implementation lives in arch
neutral drivers/xen/events/events_base.c.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/20200520161600.361895-1-vkuznets@redhat.com

x86/entry: Remove the TRACE_IRQS cruft

No more users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202120.523289762@linutronix.de

x86/entry: Move paranoid irq tracing out of ASM code

The last step to remove the irq tracing cruft from ASM. Ignore #DF as the
maschine is going to die anyway.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202120.414043330@linutronix.de

x86/entry/64: Remove TRACE_IRQS_*_DEBUG

Since INT3/#BP no longer runs on an IST, this workaround is no longer
required.

Tested by running lockdep+ftrace as described in the initial commit:

  5963e317b1e9 ("ftrace/x86: Do not change stacks in DEBUG when calling lockdep")

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202120.319418546@linutronix.de

x86/entry/32: Remove redundant irq disable code

All exceptions/interrupts return with interrupts disabled now. No point in
doing this in ASM again.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202120.221223450@linutronix.de

x86/entry: Make enter_from_user_mode() static

The ASM users are gone. All callers are local.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202120.129232680@linutronix.de

x86/entry/64: Remove IRQ stack switching ASM

No more users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202120.021462159@linutronix.de

x86/entry: Remove the apic/BUILD interrupt leftovers

Remove all the code which was there to emit the system vector stubs. All
users are gone.

Move the now unused GET_CR2_INTO macro muck to head_64.S where the last
user is. Fixup the eye hurting comment there while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.927433002@linutronix.de

x86/entry: Convert reschedule interrupt to IDTENTRY_SYSVEC_SIMPLE

The scheduler IPI does not need the full interrupt entry handling logic
when the entry is from kernel mode. Use IDTENTRY_SYSVEC_SIMPLE and spare
all the overhead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.835425642@linutronix.de

x86/entry: Convert XEN hypercall vector to IDTENTRY_SYSVEC

Convert the last oldstyle defined vector to IDTENTRY_SYSVEC:

  - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
  - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
  - Remove the ASM idtentries in 64-bit
  - Remove the BUILD_INTERRUPT entries in 32-bit
  - Remove the old prototypes

Fixup the related XEN code by providing the primary C entry point in x86 to
avoid cluttering the generic code with X86'isms.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.741950104@linutronix.de

x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVEC

Convert various hypervisor vectors to IDTENTRY_SYSVEC:

  - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
  - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
  - Remove the ASM idtentries in 64-bit
  - Remove the BUILD_INTERRUPT entries in 32-bit
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.647997594@linutronix.de

x86/entry: Convert KVM vectors to IDTENTRY_SYSVEC*

Convert KVM specific system vectors to IDTENTRY_SYSVEC*:

The two empty stub handlers which only increment the stats counter do no
need to run on the interrupt stack. Use IDTENTRY_SYSVEC_SIMPLE for them.

The wakeup handler does more work and runs on the interrupt stack.

None of these handlers need to save and restore the irq_regs pointer.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.555715519@linutronix.de

x86/entry: Convert various system vectors

Convert various system vectors to IDTENTRY_SYSVEC:

  - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
  - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
  - Remove the ASM idtentries in 64-bit
  - Remove the BUILD_INTERRUPT entries in 32-bit
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.464812973@linutronix.de

x86/entry: Convert SMP system vectors to IDTENTRY_SYSVEC

Convert SMP system vectors to IDTENTRY_SYSVEC:

  - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
  - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
  - Remove the ASM idtentries in 64-bit
  - Remove the BUILD_INTERRUPT entries in 32-bit
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.372234635@linutronix.de

x86/entry: Convert APIC interrupts to IDTENTRY_SYSVEC

Convert APIC interrupts to IDTENTRY_SYSVEC:

  - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC
  - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC
  - Remove the ASM idtentries in 64-bit
  - Remove the BUILD_INTERRUPT entries in 32-bit
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.280728850@linutronix.de

x86/entry: Provide IDTENTRY_SYSVEC

Provide IDTENTRY variants for system vectors to consolidate the different
mechanisms to emit the ASM stubs for 32- and 64-bit.

On 64-bit this also moves the stack switching from ASM to C code. 32-bit will
excute the system vectors w/o stack switching as before.

The simple variant is meant for "empty" system vectors like scheduler IPI
and KVM posted interrupt vectors. These do not need the full glory of irq
enter/exit handling with softirq processing and more.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.185317067@linutronix.de

x86/entry: Use idtentry for interrupts

Replace the extra interrupt handling code and reuse the existing idtentry
machinery. This moves the irq stack switching on 64-bit from ASM to C code;
32-bit already does the stack switching in C.

This requires to remove HAVE_IRQ_EXIT_ON_IRQ_STACK as the stack switch is
not longer in the low level entry code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202119.078690991@linutronix.de

x86/entry: Add IRQENTRY_IRQ macro

Provide a seperate IDTENTRY macro for device interrupts. Similar to
IDTENTRY_ERRORCODE with the addition of invoking irq_enter/exit_rcu() and
providing the errorcode as a 'u8' argument to the C function, which
truncates the sign extended vector number.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.984573165@linutronix.de

x86/irq: Rework handle_irq() for 64-bit

To consolidate the interrupt entry/exit code vs. the other exceptions
make handle_irq() an inline and handle both 64-bit and 32-bit mode.

Preparatory change to move irq stack switching for 64-bit to C which allows
to consolidate the entry exit handling by reusing the idtentry machinery
both in ASM and C.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.889972748@linutronix.de

x86/irq: Convey vector as argument and not in ptregs

Device interrupts which go through do_IRQ() or the spurious interrupt
handler have their separate entry code on 64 bit for no good reason.

Both 32 and 64 bit transport the vector number through ORIG_[RE]AX in
pt_regs. Further the vector number is forced to fit into an u8 and is
complemented and offset by 0x80 so it's in the signed character
range. Otherwise GAS would expand the pushq to a 5 byte instruction for any
vector > 0x7F.

Treat the vector number like an error code and hand it to the C function as
argument. This allows to get rid of the extra entry code in a later step.

Simplify the error code push magic by implementing the pushq imm8 via a
'.byte 0x6a, vector' sequence so GAS is not able to screw it up. As the
pushq imm8 is sign extending the resulting error code needs to be truncated
to 8 bits in C code.

Originally-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.796915981@linutronix.de

x86/irq: Use generic irq_regs implementation

The only difference is the name of the per-CPU variable: irq_regs
vs. __irq_regs, but the accessor functions are identical.

Remove the pointless copy and use the generic variant.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.704169051@linutronix.de

x86/entry/32: Remove common_exception()

No more users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.611906966@linutronix.de

x86/entry/64: Remove error_exit()

No more users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.516757524@linutronix.de

x86/entry: Change exit path of xen_failsafe_callback

xen_failsafe_callback() is invoked from XEN for two cases:

  1. Fault while reloading DS, ES, FS or GS
  2. Fault while executing IRET

 #1 retries the IRET after XEN has fixed up the segments.
 #2 injects a #GP which kills the task

For #1 there is no reason to go through the full exception return path
because the tasks TIF state is still the same. So just going straight to
the IRET path is good enough.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.423224507@linutronix.de

x86/entry: Remove the transition leftovers

Now that all exceptions are converted over the sane flag is not longer
needed. Also the vector argument of idtentry_body on 64-bit is pointless
now.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.331115895@linutronix.de

x86/entry: Switch page fault exception to IDTENTRY_RAW

Convert page fault exceptions to IDTENTRY_RAW:

  - Implement the C entry point with DEFINE_IDTENTRY_RAW
  - Add the CR2 read into the exception handler
  - Add the idtentry_enter/exit_cond_rcu() invocations in
    in the regular page fault handler and in the async PF
    part.
  - Emit the ASM stub with DECLARE_IDTENTRY_RAW
  - Remove the ASM idtentry in 64-bit
  - Remove the CR2 read from 64-bit
  - Remove the open coded ASM entry code in 32-bit
  - Fix up the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.238455120@linutronix.de

x86/entry/64: Simplify idtentry_body

All C functions which do not have an error code have been converted to the
new IDTENTRY interface which does not expect an error code in the
arguments. Spare the XORL.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202118.145811853@linutronix.de

x86/entry: Switch XEN/PV hypercall entry to IDTENTRY

Convert the XEN/PV hypercall to IDTENTRY:

  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64-bit
  - Remove the open coded ASM entry code in 32-bit
  - Remove the old prototypes

The handler stubs need to stay in ASM code as they need corner case handling
and adjustment of the stack pointer.

Provide a new C function which invokes the entry/exit handling and calls
into the XEN handler on the interrupt stack if required.

The exit code is slightly different from the regular idtentry_exit() on
non-preemptible kernels. If the hypercall is preemptible and need_resched()
is set then XEN provides a preempt hypercall scheduling function.

Move this functionality into the entry code so it can use the existing
idtentry functionality.

[ mingo: Build fixes. ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200521202118.055270078@linutronix.de

x86/entry: Split out idtentry_exit_cond_resched()

The XEN PV hypercall requires the ability of conditional rescheduling when
preemption is disabled because some hypercalls take ages.

Split out the rescheduling code from idtentry_exit_cond_rcu() so it can
be reused for that.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.962199649@linutronix.de

x86/entry/64: Move do_softirq_own_stack() to C

The first step to get rid of the ENTER/LEAVE_IRQ_STACK ASM macro maze.  Use
the new C code helpers to move do_softirq_own_stack() out of ASM code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.870911120@linutronix.de

x86/entry: Provide helpers for executing on the irqstack

Device interrupt handlers and system vector handlers are executed on the
interrupt stack. The stack switch happens in the low level assembly entry
code. This conflicts with the efforts to consolidate the exit code in C to
ensure correctness vs. RCU and tracing.

As there is no way to move #DB away from IST due to the MOV SS issue, the
requirements vs. #DB and NMI for switching to the interrupt stack do not
exist anymore. The only requirement is that interrupts are disabled.

That allows the moving of the stack switching to C code, which simplifies the
entry/exit handling further, because it allows the switching of stacks after
handling the entry and on exit before handling RCU, returning to usermode and
kernel preemption in the same way as for regular exceptions.

The initial attempt of having the stack switching in inline ASM caused too
much headache vs. objtool and the unwinder. After analysing the use cases
it was agreed on that having the stack switch in ASM for the price of an
indirect call is acceptable, as the main users are indirect call heavy
anyway and the few system vectors which are empty shells (scheduler IPI and
KVM posted interrupt vectors) can run from the regular stack.

Provide helper functions to check whether the interrupt stack is already
active and whether stack switching is required.

64-bit only for now, as 32-bit has a variant of that already. Once this is
cleaned up, the two implementations might be consolidated as an additional
cleanup on top.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.763775313@linutronix.de

genirq: Provide __irq_enter/exit_raw()

Like __irq_enter/exit() but without time accounting. To be used for "empty"
system vectors like the scheduler IPI to avoid the overhead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.671682341@linutronix.de

genirq: Provide irq_enter/exit_rcu()

irq_enter()/exit() currently include RCU handling. To properly separate the RCU
handling code, provide variants which contain only the non-RCU related
functionality.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.567023613@linutronix.de

x86/entry: Clean up idtentry_enter/exit() leftovers

Now that everything is converted to conditional RCU handling remove
idtentry_enter/exit() and tidy up the conditional functions.

This does not remove rcu_irq_exit_preempt(), to avoid conflicts with the RCU
tree. Will be removed once all of this hits Linus's tree.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.473597954@linutronix.de

x86/idtentry: Switch to conditional RCU handling

Switch all idtentry_enter/exit() users over to the new conditional RCU
handling scheme and make the user mode entries in #DB, #INT3 and #MCE use
the user mode idtentry functions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.382387286@linutronix.de

x86/entry: Provide idtentry_enter/exit_user()

As there are exceptions which already handle entry from user mode and from
kernel mode separately, providing explicit user entry/exit handling callbacks
makes sense and makes the code easier to understand.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20200521202117.289548561@linutronix.de

x86/entry: Provide idtentry_entry/exit_cond_rcu()

After a lengthy discussion [1] it turned out that RCU does not need a full
rcu_irq_enter/exit() when RCU is already watching. All it needs if
NOHZ_FULL is active is to check whether the tick needs to be restarted.

This allows to avoid a separate variant for the pagefault handler which
cannot invoke rcu_irq_enter() on a kernel pagefault which might sleep.

The cond_rcu argument is only temporary and will be removed once the
existing users of idtentry_enter/exit() have been cleaned up. After that
the code can be significantly simplified.

[ mingo: Simplified the control flow ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: [1] https://lkml.kernel.org/r/20200515235125.628629605@linutronix.de
Link: https://lore.kernel.org/r/20200521202117.181397835@linutronix.de

nmi, tracing: Make hardware latency tracing noinstr safe

The hardware latency tracer calls into instrumentable functions. Move the
calls into the RCU watching sections and annotate them.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20200521202116.904176298@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/entry: Fix allnoconfig build warning

The following commit:

  095b7a3e7745 ("x86/entry: Convert double fault exception to IDTENTRY_DF")

introduced a new build warning on 64-bit allnoconfig kernels, that have CONFIG_VMAP_STACK disabled:

  arch/x86/kernel/traps.c:332:16: warning: unused variable ‘address’ [-Wunused-variable]

This variable is only used if CONFIG_VMAP_STACK is defined, so make it
dependent on that, not CONFIG_X86_64.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>

x86/entry: Convert double fault exception to IDTENTRY_DF

Convert #DF to IDTENTRY_DF
  - Implement the C entry point with DEFINE_IDTENTRY_DF
  - Emit the ASM stub with DECLARE_IDTENTRY_DF on 64bit
  - Remove the ASM idtentry in 64bit
  - Adjust the 32bit shim code
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.583415264@linutronix.de

x86/idtentry: Provide IDTENTRY_DF

Provide a separate macro for #DF as this needs to emit paranoid only code
and has also a special ASM stub in 32bit.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.583415264@linutronix.de

x86/mce: Address objtools noinstr complaints

Mark the relevant functions noinstr, use the plain non-instrumented MSR
accessors. The only odd part is the instrumentation_begin()/end() pair around the
indirect machine_check_vector() call as objtool can't figure that out. The
possible invoked functions are annotated correctly.

Also use notrace variant of nmi_enter/exit(). If MCEs happen then hardware
latency tracing is the least of the worries.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.476734898@linutronix.de

x86/traps: Address objtool noinstr complaints in #DB

The functions invoked from handle_debug() can be instrumented. Tell objtool
about it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.380927730@linutronix.de

x86/traps: Restructure #DB handling

Now that there are separate entry points, move the kernel/user_mode specifc
checks into the entry functions so the common handling code does not need
the extra mode checks. Make the code more readable while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.283276272@linutronix.de

x86/entry: Implement user mode C entry points for #DB and #MCE

The MCE entry point uses the same mechanism as the IST entry point for
now. For #DB split the inner workings and just keep the nmi_enter/exit()
magic in the IST variant. Fixup the ASM code to emit the proper
noist_##cfunc call.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.177564104@linutronix.de

x86/idtentry: Provide IDTRENTRY_NOIST variants for #DB and #MC

Provide NOIST entry point macros which allows to implement NOIST variants
of the C entry points. These are invoked when #DB or #MC enter from user
space. This allows explicit handling of the difference between user mode
and kernel mode entry later.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135315.084882104@linutronix.de

x86/entry/64: Remove error code clearing from #DB and #MCE ASM stub

The C entry points do not expect an error code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.992621707@linutronix.de

x86/entry: Convert Debug exception to IDTENTRY_DB

Convert #DB to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY_DB
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.900297476@linutronix.de

x86/db: Split out dr6/7 handling

DR6/7 should be handled before nmi_enter() is invoked and restore after
nmi_exit() to minimize the exposure.

Split it out into helper inlines and bring it into the correct order.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.808628211@linutronix.de

x86/nmi: Protect NMI entry against instrumentation

Mark all functions in the fragile code parts noinstr or force inlining so
they can't be instrumented.

Also make the hardware latency tracer invocation explicit outside of
non-instrumentable section.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.716186134@linutronix.de

x86/entry: Convert NMI to IDTENTRY_NMI

Convert #NMI to IDTENTRY_NMI:
  - Implement the C entry point with DEFINE_IDTENTRY_NMI
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.609932306@linutronix.de

x86/idtentry: Provide IDTENTRY_XEN for XEN/PV

XEN/PV has special wrappers for NMI and DB exceptions. They redirect these
exceptions through regular IDTENTRY points. Provide the necessary IDTENTRY
macros to make this work

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.518622698@linutronix.de

x86/mce: Use untraced rd/wrmsr in the MCE offline/crash check

mce_check_crashing_cpu() is called right at the entry of the MCE
handler. It uses mce_rdmsr() and mce_wrmsr() which are wrappers around
rdmsr() and wrmsr() to handle the MCE error injection mechanism, which is
pointless in this context, i.e. when the MCE hits an offline CPU or the
system is already marked crashing.

The MSR access can also be traced, so use the untraceable variants. This
is also safe vs. XEN paravirt as these MSRs are not affected by XEN PV
modifications.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.426347351@linutronix.de

x86/entry: Convert Machine Check to IDTENTRY_IST

Convert #MC to IDTENTRY_MCE:
  - Implement the C entry points with DEFINE_IDTENTRY_MCE
  - Emit the ASM stub with DECLARE_IDTENTRY_MCE
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes
  - Remove the error code from *machine_check_vector() as
    it is always 0 and not used by any of the functions
    it can point to. Fixup all the functions as well.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.334980426@linutronix.de

x86/mce: Move nmi_enter/exit() into the entry point

There is no reason to have nmi_enter/exit() in the actual MCE
handlers. Move it to the entry point. This also covers the until now
uncovered initial handler which only prints.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.243936614@linutronix.de

x86/idtentry: Provide IDTENTRY_IST

Same as IDTENTRY but for exceptions which run on Interrupt Stacks (IST) on
64bit. For 32bit this maps to IDTENTRY.

There are 3 variants which will be used:
      IDTENTRY_MCE
      IDTENTRY_DB
      IDTENTRY_NMI

These map to IDTENTRY_IST, but only the MCE and DB variants are emitting
ASM code as the NMI entry needs hand crafted ASM still.

The function defines do not contain any idtenter/exit calls as these
exceptions need special treatment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.137125609@linutronix.de

x86/traps: Split int3 handler up

For code simplicity split up the int3 handler into a kernel and user part
which makes the code flow simpler to understand.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/20200505135314.045220765@linutronix.de

x86/entry: Convert INT3 exception to IDTENTRY_RAW

Convert #BP to IDTENTRY_RAW:
  - Implement the C entry point with DEFINE_IDTENTRY_RAW
  - Invoke idtentry_enter/exit() from the function body
  - Emit the ASM stub with DECLARE_IDTENTRY_RAW
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

This could be a plain IDTENTRY, but as Peter pointed out INT3 is broken
vs. the static key in the context tracking code as this static key might be
in the state of being patched and has an int3 which would recurse forever.
IDTENTRY_RAW is therefore chosen to allow addressing this issue without
lots of code churn.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.938474960@linutronix.de

x86/idtentry: Provide IDTENTRY_RAW

Some exception handlers need to do extra work before any of the entry
helpers are invoked. Provide IDTENTRY_RAW for this.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.830540017@linutronix.de

x86/int3: Inline bsearch()

Avoid calling out to bsearch() by inlining it, for normal kernel configs
this was the last external call and poke_int3_handler() is now fully self
sufficient -- no calls to external code.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.731774429@linutronix.de

lib/bsearch: Provide __always_inline variant

For code that needs the ultimate performance (it can inline the @cmp
function too) or simply needs to avoid calling external functions for
whatever reason, provide an __always_inline variant of bsearch().

[ tglx: Renamed to __inline_bsearch() as suggested by Andy ]

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.624443814@linutronix.de

x86/int3: Avoid atomic instrumentation

Use arch_atomic_*() and __READ_ONCE() to ensure nothing untoward
creeps in and ruins things.

That is; this is the INT3 text poke handler, strictly limit the code
that runs in it, lest it inadvertenly hits yet another INT3.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.517429268@linutronix.de

x86/int3: Ensure that poke_int3_handler() is not traced

In order to ensure poke_int3_handler() is completely self contained -- this
is called while modifying other text, imagine the fun of hitting another
INT3 -- ensure that everything it uses is not traced.

The primary means here is to force inlining; bsearch() is notrace because
all of lib/ is.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135313.410702173@linutronix.de

x86/entry/32: Convert IRET exception to IDTENTRY_SW

Convert the IRET exception handler to IDTENTRY_SW. This is slightly
different than the conversions of hardware exceptions as the IRET exception
is invoked via an exception table when IRET faults. So it just uses the
IDTENTRY_SW mechanism for consistency. It does not emit ASM code as it does
not fit the other idtentry exceptions.

  - Implement the C entry point with DEFINE_IDTENTRY_SW() which maps to
    DEFINE_IDTENTRY()
  - Fixup the XEN/PV code
  - Remove the old prototypes
  - Remove the RCU warning as the new entry macro ensures correctness

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134906.128769226@linutronix.de

x86/entry: Convert SIMD coprocessor error exception to IDTENTRY

Convert #XF to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Handle INVD_BUG in C
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes
  - Remove the RCU warning as the new entry macro ensures correctness

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134906.021552202@linutronix.de

x86/entry: Convert Alignment check exception to IDTENTRY

Convert #AC to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes
  - Remove the RCU warning as the new entry macro ensures correctness

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.928967113@linutronix.de

x86/entry: Convert Coprocessor error exception to IDTENTRY

Convert #MF to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes
  - Remove the RCU warning as the new entry macro ensures correctness

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.838823510@linutronix.de

x86/entry: Convert Spurious interrupt bug exception to IDTENTRY

Convert #SPURIOUS to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.728077036@linutronix.de

x86/entry: Convert General protection exception to IDTENTRY

Convert #GP to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes
  - Remove the RCU warning as the new entry macro ensures correctness

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.637269946@linutronix.de

x86/entry: Convert Stack segment exception to IDTENTRY

Convert #SS to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134905.539867572@linutronix.de

x86/entry: Convert Segment not present exception to IDTENTRY

Convert #NP to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.443591450@linutronix.de

x86/entry: Convert Invalid TSS exception to IDTENTRY

Convert #TS to IDTENTRY_ERRORCODE:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.350676449@linutronix.de

x86/idtentry: Provide IDTENTRY_ERRORCODE

Same as IDTENTRY but the C entry point has an error code argument.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.258989060@linutronix.de

x86/entry: Convert Coprocessor segment overrun exception to IDTENTRY

Convert #OLD_MF to IDTENTRY:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.838823510@linutronix.de

x86/entry: Convert Device not available exception to IDTENTRY

Convert #NM to IDTENTRY:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes
  - Remove the RCU warning as the new entry macro ensures correctness

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134905.056243863@linutronix.de

x86/entry: Convert Invalid Opcode exception to IDTENTRY

Convert #UD to IDTENTRY:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Fixup the FOOF bug call in fault.c
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.955511913@linutronix.de

x86/entry: Convert Bounds exception to IDTENTRY

Convert #BR to IDTENTRY:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes
  - Remove the RCU warning as the new entry macro ensures correctness

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.863001309@linutronix.de

x86/entry: Convert Overflow exception to IDTENTRY

Convert #OF to IDTENTRY:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code
  - Remove the old prototypes

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.771457898@linutronix.de

x86/entry: Convert Divide Error to IDTENTRY

Convert #DE to IDTENTRY:
  - Implement the C entry point with DEFINE_IDTENTRY
  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64bit
  - Remove the open coded ASM entry code in 32bit
  - Fixup the XEN/PV code

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134904.663914713@linutronix.de

x86/traps: Prepare for using DEFINE_IDTENTRY

Prepare for using IDTENTRY to define the C exception/trap entry points. It
would be possible to glue this into the existing macro maze, but it's
simpler and better to read at the end to just make them distinct.

Provide a trivial inline helper to read the trap address and add a comment
explaining the logic behind it.

The existing macros will be removed once all instances are converted.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.556327833@linutronix.de

x86/entry/common: Provide idtentry_enter/exit()

Provide functions which handle the low level entry and exit similar to
enter/exit from user mode.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134904.457578656@linutronix.de

x86/idtentry: Provide macros to define/declare IDT entry points

Provide DECLARE/DEFINE_IDTENTRY() macros.

DEFINE_IDTENTRY() provides a wrapper which acts as the function
definition. The exception handler body is just appended to it with curly
brackets. The entry point is marked noinstr so that irq tracing and the
enter_from_user_mode() can be moved into the C-entry point. As all
C-entries use the same macro (or a later variant) the necessary entry
handling can be implemented at one central place.

DECLARE_IDTENTRY() provides the function prototypes:
  - The C entry point       cfunc
  - The ASM entry point asm_cfunc
  - The XEN/PV entry point xen_asm_cfunc

They all follow the same naming convention.

When included from ASM code DECLARE_IDTENTRY() is a macro which emits the
low level entry point in assembly by instantiating idtentry.

IDTENTRY is the simplest variant which just has a pt_regs argument. It's
going to be used for all exceptions which have no error code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.273363275@linutronix.de

x86/entry/32: Provide macro to emit IDT entry stubs

32 and 64 bit have unnecessary different ways to populate the exception
entry code. Provide a idtentry macro which allows to consolidate all of
that.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134904.166735365@linutronix.de

x86/entry/64: Provide sane error entry/exit

For gradual conversion provide a macro parameter and the required code
which allows to handle instrumentation and interrupt flags tracking in C.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134904.058904490@linutronix.de

x86/entry: Distangle idtentry

idtentry is a completely unreadable maze. Split it into distinct idtentry
variants which only contain the minimal code:

  - idtentry for regular exceptions
  - idtentry_mce_debug for #MCE and #DB
  - idtentry_df for #DF

The generated binary code is equivalent.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.949227617@linutronix.de

x86/entry/64: Reorder idtentries

Move them all together so verifying the cleanup patches for binary
equivalence will be easier.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134903.841853522@linutronix.de

x86/traps: Split trap numbers out in a separate header

So they can be used in ASM code. For this it is also necessary to convert
them to defines. Will be used for the rework of the entry code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134903.731004084@linutronix.de

x86/traps: Make interrupt enable/disable symmetric in C code

Traps enable interrupts conditionally but rely on the ASM return code to
disable them again. That results in redundant interrupt disable and trace
calls.

Make the trap handlers disable interrupts before returning to avoid that,
which allows simplification of the ASM entry code in follow up changes.

Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.622702796@linutronix.de

x86/entry/64: Use native swapgs in asm_load_gs_index()

When PARAVIRT_XXL is in use, then load_gs_index() uses xen_load_gs_index()
and asm_load_gs_index() is unused.

It's therefore pointless to use the paravirtualized SWAPGS implementation
in asm_load_gs_index(). Switch it to a plain swapgs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200512213809.583980272@linutronix.de

x86/entry: Disable interrupts for native_load_gs_index() in C code

There is absolutely no point in doing this in ASM code. Move it to C.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.531534675@linutronix.de

x86/traps: Mark sync_regs() noinstr

Replace the notrace and NOKPROBE annotations with noinstr.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.439765290@linutronix.de

x86/traps: Mark fixup_bad_iret() noinstr

This is called from deep entry ASM in a situation where instrumentation
will cause more harm than providing useful information.

Switch from memmove() to memcpy() because memmove() can't be called
from noinstr code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505134903.346741553@linutronix.de