tg3: Don't turn off led on 5719 serdes port 0

[ Upstream commit 989038e217e94161862a959e82f9a1ecf8dda152 ]

Turning off led on port 0 of the 5719 serdes causes all other ports to
lose power and stop functioning. Add tg3_phy_led_bug() function to check
for this condition. We use a switch() in tg3_phy_led_bug() for
consistency with the tg3_phy_power_bug() function.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ICMPv6: treat dest unreachable codes 5 and 6 as EACCES, not EPROTO

[ Upstream commit 61e76b178dbe7145e8d6afa84bb4ccea71918994 ]

RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination
unreachable) messages:
        5 - Source address failed ingress/egress policy
6 - Reject route to destination

Now they are treated as protocol error and icmpv6_err_convert() converts them
to EPROTO.

RFC 4443 says:
"Codes 5 and 6 are more informative subsets of code 1."

Treat codes 5 and 6 as code 1 (EACCES)

Btw, connect() returning -EPROTO confuses firefox, so that fallback to
other/IPv4 addresses does not work:
https://bugzilla.mozilla.org/show_bug.cgi?id=910773

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delay

[ Upstream commit 2d98c29b6fb3de44d9eaa73c09f9cf7209346383 ]

While looking into MLDv1/v2 code, I noticed that bridging code does
not convert it's max delay into jiffies for MLDv2 messages as we do
in core IPv6' multicast code.

RFC3810, 5.1.3. Maximum Response Code says:

  The Maximum Response Code field specifies the maximum time allowed
  before sending a responding Report. The actual time allowed, called
  the Maximum Response Delay, is represented in units of milliseconds,
  and is derived from the Maximum Response Code as follows: [...]

As we update timers that work with jiffies, we need to convert it.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Linus Lüssing <linus.luessing@web.de>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: revert 8728c544a9c ("net: dev_pick_tx() fix")

[ Upstream commit 702821f4ea6f68db18aa1de7d8ed62c6ba586a64 ]

commit 8728c544a9cbdc ("net: dev_pick_tx() fix") and commit
b6fe83e9525a ("bonding: refine IFF_XMIT_DST_RELEASE capability")
are quite incompatible : Queue selection is disabled because skb
dst was dropped before entering bonding device.

This causes major performance regression, mainly because TCP packets
for a given flow can be sent to multiple queues.

This is particularly visible when using the new FQ packet scheduler
with MQ + FQ setup on the slaves.

We can safely revert the first commit now that 416186fbf8c5b
("net: Split core bits of netdev_pick_tx into __netdev_pick_tx")
properly caps the queue_index.

Reported-by: Xi Wang <xii@google.com>
Diagnosed-by: Xi Wang <xii@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Denys Fedorysychenko <nuclearcat@nuclearcat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: set sk_err correctly when connection fails

[ Upstream commit 2c8d85182348021fc0a1bed193a4be4161dc8364 ]

Should a connect fail, if the publication/server is unavailable or
due to some other error, a positive value will be returned and errno
is never set. If the application code checks for an explicit zero
return from connect (success) or a negative return (failure), it
will not catch the error and subsequent send() calls will fail as
shown from the strace snippet below.

socket(0x1e /* PF_??? */, SOCK_SEQPACKET, 0) = 3
connect(3, {sa_family=0x1e /* AF_??? */, sa_data="\2\1\322\4\0\0\322\4\0\0\0\0\0\0"}, 16) = 111
sendto(3, "test", 4, 0, NULL, 0)        = -1 EPIPE (Broken pipe)

The reason for this behaviour is that TIPC wrongly inverts error
codes set in sk_err.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: tcp_make_synack() should use sock_wmalloc

[ Upstream commit eb8895debe1baba41fcb62c78a16f0c63c21662a ]

In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed
the call to sock_wmalloc in tcp_make_synack to alloc_skb.  In doing so,
the netfilter owner match lost its ability to block the SYNACK packet on
outbound listening sockets.  Revert the change, restoring the owner match
functionality.

This closes netfilter bugzilla #847.

Signed-off-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Don't depend on per socket memory for neighbour discovery messages

[ Upstream commit 25a6e6b84fba601eff7c28d30da8ad7cfbef0d43 ]

Allocating skbs when sending out neighbour discovery messages
currently uses sock_alloc_send_skb() based on a per net namespace
socket and thus share a socket wmem buffer space.

If a netdevice is temporarily unable to transmit due to carrier
loss or for other reasons, the queued up ndisc messages will cosnume
all of the wmem space and will thus prevent from any more skbs to
be allocated even for netdevices that are able to transmit packets.

The number of neighbour discovery messages sent is very limited,
use of alloc_skb() bypasses the socket wmem buffer size enforcement
while the manual call to skb_set_owner_w() maintains the socket
reference needed for the IPv6 output path.

This patch has orginally been posted by Eric Dumazet in a modified
form.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: sendto/hdrincl: don't use destination address found in header

[ Upstream commit c27c9322d015dc1d9dfdf31724fca71c0476c4d1 ]

ipv4: raw_sendmsg: don't use header's destination address

A sendto() regression was bisected and found to start with commit
f8126f1d5136be1 (ipv4: Adjust semantics of rt->rt_gateway.)

The problem is that it tries to ARP-lookup the constructed packet's
destination address rather than the explicitly provided address.

Fix this using FLOWI_FLAG_KNOWN_NH so that given nexthop is used.

cf. commit 2ad5b9e4bd314fc685086b99e90e5de3bc59e26b

Reported-by: Chris Clark <chris.clark@alcatel-lucent.com>
Bisected-by: Chris Clark <chris.clark@alcatel-lucent.com>
Tested-by: Chris Clark <chris.clark@alcatel-lucent.com>
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Chris Clark <chris.clark@alcatel-lucent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: don't apply tsoffset if rcv_tsecr is zero

[ Upstream commit e3e12028315749b7fa2edbc37328e5847be9ede9 ]

The zero value means that tsecr is not valid, so it's a special case.

tsoffset is used to customize tcp_time_stamp for one socket.
tsoffset is usually zero, it's used when a socket was moved from one
host to another host.

Currently this issue affects logic of tcp_rcv_rtt_measure_ts. Due to
incorrect value of rcv_tsecr, tcp_rcv_rtt_measure_ts sets rto to
TCP_RTO_MAX.

Reported-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: initialize rcv_tstamp for restored sockets

[ Upstream commit c7781a6e3c4a9a17e144ec2db00ebfea327bd627 ]

u32 rcv_tstamp;     /* timestamp of last received ACK */

Its value used in tcp_retransmit_timer, which closes socket
if the last ack was received more then TCP_RTO_MAX ago.

Currently rcv_tstamp is initialized to zero and if tcp_retransmit_timer
is called before receiving a first ack, the connection is closed.

This patch initializes rcv_tstamp to a timestamp, when a socket was
restored.

Reported-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: Add HP hs2434 device to ZLP exception table

[ Upstream commit 03803a59e32453ee5737c6096a295f748f03cc49 ]

This patch adds another entry (HP hs2434 Mobile Broadband) to the list
of exceptional devices that require a zero length packet in order to
function properly. This list was added in commit 844e88f0. The hs2434
is manufactured by Sierra Wireless, who also produces the MC7710,
which the ZLP exception list was created for in the first place. So
hopefully it is just this one producer's devices that will need this
workaround.

Tested on a DM1-4310NR HP notebook, which does not function without this
change.

Signed-off-by: Rob Gardner <robmatic@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

be2net: fix disabling TX in be_close()

[ Upstream commit 6e1f99757a2b24b7255263b2240a0eb04215174d ]

commit fba875591 ("disable TX in be_close()") disabled TX in be_close()
to protect be_xmit() from touching freed up queues in the AER recovery
flow.  But, TX must be disabled *before* cleaning up TX completions in
the close() path, not after. This allows be_tx_compl_clean() to free up
all TX-req skbs that were notified to the HW.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sfc: Fix lookup of default RX MAC filters when steered using ethtool

[ Upstream commit f3851b0acc5a75bd33c6d344a2e4f920e1622ff0 ]

commit 385904f819e3 ('sfc: Don't use
efx_filter_{build,hash,increment}() for default MAC filters') used the
wrong name to find the index of default RX MAC filters at insertion/
update time.  This could result in memory corruption and would in any
case silently fail to update the filter.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: restore "linklayer atm" handling

[ Upstream commit 8a8e3d84b1719a56f9151909e80ea6ebc5b8e318 ]

commit 56b765b79 ("htb: improved accuracy at high rates")
broke the "linklayer atm" handling.

 tc class add ... htb rate X ceil Y linklayer atm

The linklayer setting is implemented by modifying the rate table
which is send to the kernel.  No direct parameter were
transferred to the kernel indicating the linklayer setting.

The commit 56b765b79 ("htb: improved accuracy at high rates")
removed the use of the rate table system.

To keep compatible with older iproute2 utils, this patch detects
the linklayer by parsing the rate table.  It also supports future
versions of iproute2 to send this linklayer parameter to the
kernel directly. This is done by using the __reserved field in
struct tc_ratespec, to convey the choosen linklayer option, but
only using the lower 4 bits of this field.

Linklayer detection is limited to speeds below 100Mbit/s, because
at high rates the rtab is gets too inaccurate, so bad that
several fields contain the same values, this resembling the ATM
detect.  Fields even start to contain "0" time to send, e.g. at
1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have
been more broken than we first realized.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: Use the correct bit length for bitmap functions in the VLAN code

[ Upstream commit ef40b7ef181b7b1a24df2ef2d1ef84956bffa635 ]

The VLAN code needs to know the length of the per-port VLAN bitmap to
perform its most basic operations (retrieving VLAN informations, removing
VLANs, forwarding database manipulation, etc). Unfortunately, in the
current implementation we are using a macro that indicates the bitmap
size in longs in places where the size in bits is expected, which in
some cases can cause what appear to be random failures.
Use the correct macro.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: restore packet statistics tp_packets to include drops

[ Upstream commit 8bcdeaff5ed544704a9a691d4aef0adb3f9c5b8f ]

getsockopt PACKET_STATISTICS returns tp_packets + tp_drops. Commit
ee80fbf301 ("packet: account statistics only in tpacket_stats_u")
cleaned up the getsockopt PACKET_STATISTICS code.
This also changed semantics. Historically, tp_packets included
tp_drops on return. The commit removed the line that adds tp_drops
into tp_packets.

This patch reinstates the old semantics.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: set timestamps for restored skb-s

[ Upstream commit 7ed5c5ae96d23da22de95e1c7a239537acd378b1 ]

When the repair mode is turned off, the write queue seqs are
updated so that the whole queue is considered to be 'already sent.

The "when" field must be set for such skb. It's used in tcp_rearm_rto
for example. If the "when" field isn't set, the retransmit timeout can
be calculated incorrectly and a tcp connected can stop for two minutes
(TCP_RTO_MAX).

Acked-by: Pavel Emelyanov <xemul@parallels.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: drop packets with multiple fragmentation headers

[ Upstream commit f46078cfcd77fa5165bf849f5e568a7ac5fa569c ]

It is not allowed for an ipv6 packet to contain multiple fragmentation
headers. So discard packets which were already reassembled by
fragmentation logic and send back a parameter problem icmp.

The updates for RFC 6980 will come in later, I have to do a bit more
research here.

Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: remove max_addresses check from ipv6_create_tempaddr

[ Upstream commit 4b08a8f1bd8cb4541c93ec170027b4d0782dab52 ]

Because of the max_addresses check attackers were able to disable privacy
extensions on an interface by creating enough autoconfigured addresses:

<http://seclists.org/oss-sec/2012/q4/292>

But the check is not actually needed: max_addresses protects the
kernel to install too many ipv6 addresses on an interface and guards
addrconf_prefix_rcv to install further addresses as soon as this limit
is reached. We only generate temporary addresses in direct response of
a new address showing up. As soon as we filled up the maximum number of
addresses of an interface, we stop installing more addresses and thus
also stop generating more temp addresses.

Even if the attacker tries to generate a lot of temporary addresses
by announcing a prefix and removing it again (lifetime == 0) we won't
install more temp addresses, because the temporary addresses do count
to the maximum number of addresses, thus we would stop installing new
autoconfigured addresses when the limit is reached.

This patch fixes CVE-2013-0343 (but other layer-2 attacks are still
possible).

Thanks to Ding Tianhong to bring this topic up again.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: George Kargiotakis <kargig@void.gr>
Cc: P J P <ppandit@redhat.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tun: signedness bug in tun_get_user()

[ Upstream commit 15718ea0d844e4816dbd95d57a8a0e3e264ba90e ]

The recent fix d9bf5f1309 "tun: compare with 0 instead of total_len" is
not totally correct.  Because "len" and "sizeof()" are size_t type, that
means they are never less than zero.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg header

[ Upstream commit 3e805ad288c524bb65aad3f1e004402223d3d504 ]

Fix the iproute2 command `bridge vlan show`, after switching from
rtgenmsg to ifinfomsg.

Let's start with a little history:

Feb 20:   Vlad Yasevich got his VLAN-aware bridge patchset included in
          the 3.9 merge window.
          In the kernel commit 6cbdceeb, he added attribute support to
          bridge GETLINK requests sent with rtgenmsg.

Mar 6th:  Vlad got this iproute2 reference implementation of the bridge
          vlan netlink interface accepted (iproute2 9eff0e5c)

Apr 25th: iproute2 switched from using rtgenmsg to ifinfomsg (63338dca)
          http://patchwork.ozlabs.org/patch/239602/
          http://marc.info/?t=136680900700007

Apr 28th: Linus released 3.9

Apr 30th: Stephen released iproute2 3.9.0

The `bridge vlan show` command haven't been working since the switch to
ifinfomsg, or in a released version of iproute2. Since the kernel side
only supports rtgenmsg, which iproute2 switched away from just prior to
the iproute2 3.9.0 release.

I haven't been able to find any documentation, about neither rtgenmsg
nor ifinfomsg, and in which situation to use which, but kernel commit
88c5b5ce seams to suggest that ifinfomsg should be used.

Fixing this in kernel will break compatibility, but I doubt that anybody
have been using it due to this bug in the user space reference
implementation, at least not without noticing this bug. That said the
functionality is still fully functional in 3.9, when reversing iproute2
commit 63338dca.

This could also be fixed in iproute2, but thats an ugly patch that would
reintroduce rtgenmsg in iproute2, and from searching in netdev it seams
like rtgenmsg usage is discouraged. I'm assuming that the only reason
that Vlad implemented the kernel side to use rtgenmsg, was because
iproute2 was using it at the time.

Signed-off-by: Asbjoern Sloth Toennesen <ast@fiberby.net>
Reviewed-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id.

[ Upstream commit 4221f40513233fa8edeef7fc82e44163fde03b9b ]

Using inner-id for tunnel id is not safe in some rare cases.
E.g. packets coming from multiple sources entering same tunnel
can have same id. Therefore on tunnel packet receive we
could have packets from two different stream but with same
source and dst IP with same ip-id which could confuse ip packet
reassembly.

Following patch reverts optimization from commit
490ab08127 (IP_GRE: Fix IP-Identification.)

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
CC: Jarno Rajahalme <jrajahalme@nicira.com>
CC: Ansis Atteka <aatteka@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genl: Hold reference on correct module while netlink-dump.

[ Upstream commit 33c6b1f6b154894321f5734e50c66621e9134e7e ]

netlink dump operations take module as parameter to hold
reference for entire netlink dump duration.
Currently it holds ref only on genl module which is not correct
when we use ops registered to genl from another module.
Following patch adds module pointer to genl_ops so that netlink
can hold ref count on it.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
CC: Jesse Gross <jesse@nicira.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genl: Fix genl dumpit() locking.

[ Upstream commit 9b96309c5b0b9e466773c07a5bc8b7b68fcf010a ]

In case of genl-family with parallel ops off, dumpif() callback
is expected to run under genl_lock, But commit def3117493eafd9df
(genl: Allow concurrent genl callbacks.) changed this behaviour
where only first dumpit() op was called under genl-lock.
For subsequent dump, only nlk->cb_lock was taken.
Following patch fixes it by defining locked dumpit() and done()
callback which takes care of genl-locking.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
CC: Jesse Gross <jesse@nicira.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtnetlink: Fix inverted check in ndo_dflt_fdb_del()

[ Upstream commit 645359930231d5e78fd3296a38b98c1a658a7ade ]

Fix inverted check when deleting an fdb entry.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8139cp: Fix skb leak in rx_status_loop failure path.

[ Upstream commit d06f5187469eee1b2932c02fd093d113cfc60d5e ]

Introduced in cf3c4c03060b688cbc389ebc5065ebcce5653e96
("8139cp: Add dma_mapping_error checking")

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip_gre: fix ipgre_header to return correct offset MIME-Version: 1.0

[ Upstream commit 77a482bdb2e68d13fae87541b341905ba70d572b ]

Fix ipgre_header() (header_ops->create) to return the correct
amount of bytes pushed. Most callers of dev_hard_header() seem
to care only if it was success, but af_packet.c uses it as
offset to the skb to copy from userspace only once. In practice
this fixes packet socket sendto()/sendmsg() to gre tunnels.

Regression introduced in c54419321455631079c7d6e60bc732dd0c5914c5
("GRE: Refactor GRE tunneling code.")

Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: don't stop backtracking in fib6_lookup_1 if subtree does not match

[ Upstream commit 3e3be275851bc6fc90bfdcd732cd95563acd982b ]

In case a subtree did not match we currently stop backtracking and return
NULL (root table from fib_lookup). This could yield in invalid routing
table lookups when using subtrees.

Instead continue to backtrack until a valid subtree or node is found
and return this match.

Also remove unneeded NULL check.

Reported-by: Teco Boot <teco@inf-net.nl>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: David Lamparter <equinox@diac24.net>
Cc: <boutier@pps.univ-paris-diderot.fr>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: cubic: fix bug in bictcp_acked()

[ Upstream commit cd6b423afd3c08b27e1fed52db828ade0addbc6b ]

While investigating about strange increase of retransmit rates
on hosts ~24 days after boot, Van found hystart was disabled
if ca->epoch_start was 0, as following condition is true
when tcp_time_stamp high order bit is set.

(s32)(tcp_time_stamp - ca->epoch_start) < HZ

Quoting Van :

 At initialization & after every loss ca->epoch_start is set to zero so
 I believe that the above line will turn off hystart as soon as the 2^31
 bit is set in tcp_time_stamp & hystart will stay off for 24 days.
 I think we've observed that cubic's restart is too aggressive without
 hystart so this might account for the higher drop rate we observe.

Diagnosed-by: Van Jacobson <vanj@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: cubic: fix overflow error in bictcp_update()

[ Upstream commit 2ed0edf9090bf4afa2c6fc4f38575a85a80d4b20 ]

commit 17a6e9f1aa9 ("tcp_cubic: fix clock dependency") added an
overflow error in bictcp_update() in following code :

/* change the unit from HZ to bictcp_HZ */
t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) -
      ca->epoch_start) << BICTCP_HZ) / HZ;

Because msecs_to_jiffies() being unsigned long, compiler does
implicit type promotion.

We really want to constrain (tcp_time_stamp - ca->epoch_start)
to a signed 32bit value, or else 't' has unexpected high values.

This bugs triggers an increase of retransmit rates ~24 days after
boot [1], as the high order bit of tcp_time_stamp flips.

[1] for hosts with HZ=1000

Big thanks to Van Jacobson for spotting this problem.

Diagnosed-by: Van Jacobson <vanj@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bridge: don't try to update timers in case of broken MLD queries

[ Upstream commit 248ba8ec05a2c3b118c2224e57eb10c128176ab1 ]

Currently we are reading an uninitialized value for the max_delay
variable when snooping an MLD query message of invalid length and would
update our timers with that.

Fixing this by simply ignoring such broken MLD queries (just like we do
for IGMP already).

This is a regression introduced by:
"bridge: disable snooping if there is no querier" (b00589af3b04)

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fib_trie: remove potential out of bound access

[ Upstream commit aab515d7c32a34300312416c50314e755ea6f765 ]

AddressSanitizer [1] dynamic checker pointed a potential
out of bound access in leaf_walk_rcu()

We could allocate one more slot in tnode_new() to leave the prefetch()
in-place but it looks not worth the pain.

Bug added in commit 82cfbb008572b ("[IPV4] fib_trie: iterator recode")

[1] :
https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: modify only neigh_parms owned by us

[ Upstream commit 9918d5bf329d0dc5bb2d9d293bcb772bdb626e65 ]

Otherwise, on neighbour creation, bond_neigh_init() will be called with a
foreign netdev.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

neighbour: populate neigh_parms on alloc before calling ndo_neigh_setup

[ Upstream commit 63134803a6369dcf7dddf7f0d5e37b9566b308d2 ]

dev->ndo_neigh_setup() might need some of the values of neigh_parms, so
populate them before calling it.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macvlan: validate flags

[ Upstream commit 1512747820367c8b3b8b72035f0f78c62f2bf1e9 ]

commit df8ef8f3aaa6692970a436204c4429210addb23a
    macvlan: add FDB bridge ops and macvlan flags
added a flags field to macvlan, which can be
controlled from userspace.
The idea is to make the interface future-proof
so we can add flags and not new fields.

However, flags value isn't validated, as a result,
userspace can't detect which flags are supported.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: check net.core.somaxconn sysctl values

[ Upstream commit 5f671d6b4ec3e6d66c2a868738af2cdea09e7509 ]

It's possible to assign an invalid value to the net.core.somaxconn
sysctl variable, because there is no checks at all.

The sk_max_ack_backlog field of the sock structure is defined as
unsigned short. Therefore, the backlog argument in inet_listen()
shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall
is truncated to the somaxconn value. So, the somaxconn value shouldn't
exceed 65535 (USHRT_MAX).
Also, negative values of somaxconn are meaningless.

before:
$ sysctl -w net.core.somaxconn=256
net.core.somaxconn = 256
$ sysctl -w net.core.somaxconn=65536
net.core.somaxconn = 65536
$ sysctl -w net.core.somaxconn=-100
net.core.somaxconn = -100

after:
$ sysctl -w net.core.somaxconn=256
net.core.somaxconn = 256
$ sysctl -w net.core.somaxconn=65536
error: "Invalid argument" setting key "net.core.somaxconn"
$ sysctl -w net.core.somaxconn=-100
error: "Invalid argument" setting key "net.core.somaxconn"

Based on a prior patch from Changli Gao.

Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Reported-by: Changli Gao <xiaosuo@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails

[ Upstream commit 446266b0c742a2c9ee8f0dce759a0117bce58a86 ]

Commit 5c766d642 ("ipv4: introduce address lifetime") leaves the ifa
resource that was allocated via inet_alloc_ifa() unfreed when returning
the function with -EINVAL. Thus, free it first via inet_free_ifa().

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

htb: fix sign extension bug

[ Upstream commit cbd375567f7e4811b1c721f75ec519828ac6583f ]

When userspace passes a large priority value
the assignment of the unsigned value hopt->prio
to  signed int cl->prio causes cl->prio to become negative and the
comparison is with TC_HTB_NUMPRIO is always false.

The result is that HTB crashes by referencing outside
the array when processing packets. With this patch the large value
wraps around like other values outside the normal range.

See: https://bugzilla.kernel.org/show_bug.cgi?id=60669

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.11

regmap: rbtree: Fix overlapping rbnodes.

commit 4e67fb5f5e336250db944921e3c68057d6203034 upstream.

Avoid overlapping register regions by making the initial blklen of a new
node 1. If a register write occurs to a yet uncached register, that is
lower than but near an existing node's base_reg, a new node is created
and it's blklen is set to an arbitrary value (sizeof(*rbnode)). That may
cause this node to overlap with another node. Those nodes should be merged,
but this merge doesn't happen yet, so this patch at least makes the initial
blklen small enough to avoid hitting the wrong node, which may otherwise
lead to severe breakage.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Zhouping Liu <zliu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: imx-drm-core: Export imx_drm_encoder_get_mux_id

commit ea8d15832016b0d07a8121159904e6b1d21b5b8b upstream.

When building imx_v6_v7_defconfig with imx-drm drivers selected as modules, we
get the following build error:

ERROR: "imx_drm_encoder_get_mux_id" [drivers/staging/imx-drm/imx-ldb.ko] undefined!

Export the required function to avoid this problem.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/arm: missing put_cpu in xen_percpu_init

commit 0d7febe58413884f6428143221971618fbf3a47d upstream.

When CONFIG_PREEMPT is enabled, Linux will not be able to boot and warn:
[    4.127825] ------------[ cut here ]------------
[    4.133376] WARNING: at init/main.c:699 do_one_initcall+0x150/0x158()
[    4.140738] initcall xen_init_events+0x0/0x10c returned with preemption imbalance

This is because xen_percpu_init uses get_cpu but doesn't have the corresponding
put_cpu.

Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/hpilo: Correct panic when an AUX iLO is detected

commit eefbc594abbb1b7e6e7eeadb65ae7c7538474210 upstream.

 Using an uninitialized variable 'devnum' after 'goto out;' was causing
 panic.  Just go ahead and return, we need to ignore AUX iLO devs.

 Oops: 0002 [#1] SMP
   .
   .
   .
 RIP  [<ffffffffa033e270>] ilo_probe+0xec/0xe7c [hpilo]

Signed-off-by: Mark Rusk <mark.rusk@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT

commit 524f42fab787a9510be826ce3d736b56d454ac6d upstream.

The ECDT of ASUSTEK L4R doesn't provide correct command and data
I/O ports.  The DSDT provides the correct information instead.

For this reason, add this machine to quirk list for ECDT validation
and use the EC information from the DSDT.

[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=60765
Reported-and-tested-by: Daniele Esposti <expo@expobrain.net>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (k10temp) Add support for Fam16h (Kabini)

commit 30b146d1cb5e7560192057098eb705118bd5511f upstream.

The temperature reporting interface stays the same, so we just
add the PCI-ID to the list.

Verified on AMD Olive Hill.

Signed-off-by: Wei Hu <wei@aristanetworks.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: acm gadget: Null termintate strings table

commit d257221854f0b34cca3247e6c45344d0470f7398 upstream.

The gadget strings table should be null terminated.
usb_gadget_get_string() loops through the table
expecting a null at the end of the list.

Signed-off-by: Graham Williams <gwilli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: fix hardware reset flow

commit ff96066e3171acdea356b331163495957cb833d0 upstream.

Both H_IS and H_IE needs to be set to receive H_RDY
interrupt

1. Assert H_IS to clear the interrupts during hw reset
and use mei_me_reg_write instead of mei_hcsr_set as the later
strips down the H_IS

2. fix interrupt disablement embarrassing typo
  hcsr |= ~H_IE -> hcsr &= ~H_IE;
this will remove the unwanted interrupt on power down

3. remove useless debug print outs

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Fix potential NULL pointer in solicited NOPOUT reject

commit 28aaa950320fc7b8df3f6d2d34fa7833391a9b72 upstream.

This patch addresses a potential NULL pointer dereference regression in
iscsit_setup_nop_out() code, specifically for two cases when a solicited
NOPOUT triggers a ISCSI_REASON_PROTOCOL_ERROR reject to be generated.

This is because iscsi_cmd is expected to be NULL for solicited NOPOUT
case before iscsit_process_nop_out() locates the descriptor via TTT
using iscsit_find_cmd_from_ttt().

This regression was originally introduced in:

commit ba159914086f06532079fc15141f46ffe7e04a41
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Wed Jul 3 03:48:24 2013 -0700

    iscsi-target: Fix iscsit_add_reject* usage for iser

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Fix iscsit_transport reference leak during NP thread reset

commit c9a03c12464c851e691e8d5b6c9deba779c512e0 upstream.

This patch fixes a bug in __iscsi_target_login_thread() where an explicit
network portal thread reset ends up leaking the iscsit_transport module
reference, along with the associated iscsi_conn allocation.

This manifests itself with iser-target where a NP reset causes the extra
iscsit_transport reference to be taken in iscsit_conn_set_transport()
during the reset, which prevents the ib_isert module from being unloaded
after the NP thread shutdown has finished.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Fix ImmediateData=Yes failure regression in >= v3.10

commit 9d86a2befceb06ee83c1a588915e6d6e0abef797 upstream.

This patch addresses a regression bug within ImmediateData=Yes failure
handling that ends up triggering an OOPs within >= v3.10 iscsi-target
code.

The problem occurs when iscsit_process_scsi_cmd() does the call to
target_put_sess_cmd(), and once again in iscsit_get_immediate_data()
that is triggered during two different cases:

 - When iscsit_sequence_cmd() returns CMDSN_LOWER_THAN_EXP, for which
   the descriptor state will already have been set to ISTATE_REMOVE
   by iscsit_sequence_cmd(), and
 - When iscsi_cmd->sense_reason is set, for which iscsit_execute_cmd()
   will have already called transport_send_check_condition_and_sense()
   to queue the exception response.

It changes iscsit_process_scsi_cmd() to drop the early call, and makes
iscsit_get_immediate_data() call target_put_sess_cmd() from a single
location after dumping the immediate data for the failed command.

The regression was initially introduced in commit:

commit 561bf15892375597ee59d473a704a3e634c4f311
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Wed Jul 3 03:58:58 2013 -0700

    iscsi-target: Fix iscsit_sequence_cmd reject handling for iser

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix trailing ASCII space usage in INQUIRY vendor+model

commit ee60bddba5a5f23e39598195d944aa0eb2d455e5 upstream.

This patch fixes spc_emulate_inquiry_std() to add trailing ASCII
spaces for INQUIRY vendor + model fields following SPC-4 text:

  "ASCII data fields described as being left-aligned shall have any
   unused bytes at the end of the field (i.e., highest offset) and
   the unused bytes shall be filled with ASCII space characters (20h)."

This addresses a problem with Falconstor NSS multipathing.

Reported-by: Tomas Molota <tomas.molota@lightstorm.sk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwl4965: fix rfkill set state regression

commit b2fcc0aee58a3435566dd6d8501a0b355552f28b upstream.

My current 3.11 fix:

commit 788f7a56fce1bcb2067b62b851a086fca48a0056
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Thu Aug 1 12:07:55 2013 +0200

    iwl4965: reset firmware after rfkill off

broke rfkill notification to user-space . I missed that bug, because
I compiled without CONFIG_RFKILL, sorry about that.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: add a flag to indicate CCK support for HT clients

commit 2dfca312a91631311c1cf7c090246cc8103de038 upstream.

brcm80211 cannot handle sending frames with CCK rates as part of an
A-MPDU session. Other drivers may have issues too. Set the flag in all
drivers that have been tested with CCK rates.

This fixes a reported brcmsmac regression introduced in
commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6
"mac80211/minstrel_ht: fix cck rate sampling"

Reported-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: add missing channel context release

commit 2a3ba63c235fdcd37f6451bdf4a0c7865a3930cf upstream.

IBSS needs to release the channel context when leaving
but I evidently missed that. Fix it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Enable PLL fix only for AR9340/AR9330

commit 19c361608ce3e73f352e323262f7e0a8264be3af upstream.

The PLL hang workaround is required only for AR9330 and
AR9340. This issue was first observed on an AP121 and the WAR
is enabled for AR9340 also (DB120 etc.), since it uses a PLL
design identical to AR9330. This is not required for AR9485 and AR9550.

Various bugs have been reported regarding this:

https://bugzilla.redhat.com/show_bug.cgi?id=997217
https://bugzilla.redhat.com/show_bug.cgi?id=994648

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k_htc: Restore skb headroom when returning skb to mac80211

commit d2e9fc141e2aa21f4b35ee27072d84e9aa6e2ba0 upstream.

ath9k_htc adds padding between the 802.11 header and the payload during
TX by moving the header. When handing the frame back to mac80211 for TX
status handling the header is not moved back into its original position.
This can result in a too small skb headroom when entering ath9k_htc
again (due to a soft retransmission for example) causing an
skb_under_panic oops.

Fix this by moving the 802.11 header back into its original position
before returning the frame to mac80211 as other drivers like rt2x00
or ath5k do.

Reported-by: Marc Kleine-Budde <mkl@blackshift.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Tested-by: Marc Kleine-Budde <mkl@blackshift.org>
Signed-off-by: Marc Kleine-Budde <mkl@blackshift.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix boot crash with DEBUG_PAGE_ALLOC=y and more than 512G RAM

commit 527bf129f9a780e11b251cf2467dc30118a57d16 upstream.

Dave Hansen reported that systems between 500G and 600G RAM
crash early if DEBUG_PAGEALLOC is selected.

 > [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
 > [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
 > [    0.000000] BRK [0x02086000, 0x02086fff] PGTABLE
 > [    0.000000] BRK [0x02087000, 0x02087fff] PGTABLE
 > [    0.000000] BRK [0x02088000, 0x02088fff] PGTABLE
 > [    0.000000] init_memory_mapping: [mem 0xe80ee00000-0xe80effffff]
 > [    0.000000]  [mem 0xe80ee00000-0xe80effffff] page 4k
 > [    0.000000] BRK [0x02089000, 0x02089fff] PGTABLE
 > [    0.000000] BRK [0x0208a000, 0x0208afff] PGTABLE
 > [    0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory

It turns out that we missed increasing needed pages in BRK to
mapping initial 2M and [0,1M) when we switched to use the #PF
handler to set memory mappings:

 > commit 8170e6bed465b4b0c7687f93e9948aca4358a33b
 > Author: H. Peter Anvin <hpa@zytor.com>
 > Date:   Thu Jan 24 12:19:52 2013 -0800
 >
 >     x86, 64bit: Use a #PF handler to materialize early mappings on demand

Before that, we had the maping from [0,512M) in head_64.S, and we
can spare two pages [0-1M).  After that change, we can not reuse
pages anymore.

When we have more than 512M ram, we need an extra page for pgd page
with [512G, 1024g).

Increase pages in BRK for page table to solve the boot crash.

Reported-by: Dave Hansen <dave.hansen@intel.com>
Bisected-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1376351004-4015-1-git-send-email-yinghai@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Fix memory corruption issue on 32-bit highmem systems

commit 347e2233b7667e336d9f671f1a52dfa3f0416e2c upstream.

Some architectures, such as ARM-32 do not return the same base address
when you call kmap_atomic() twice on the same page.
This causes problems for the memmove() call in the XDR helper routine
"_shift_data_right_pages()", since it defeats the detection of
overlapping memory ranges, and has been seen to corrupt memory.

The fix is to distinguish between the case where we're doing an
inter-page copy or not. In the former case of we know that the memory
ranges cannot possibly overlap, so we can additionally micro-optimise
by replacing memmove() with memcpy().

Reported-by: Mark Young <MYoung@nvidia.com>
Reported-by: Matt Craighead <mcraighead@nvidia.com>
Cc: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Matt Craighead <mcraighead@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: ivb: fix edp voltage swing reg val

commit 77fa4cbd5fa389e28419bbe8ac491b5fdd54840d upstream.

Fix the typo introduced in

commit 1a2eb4604b85c5efb343da8a4dcf41288fcfca85
Author: Keith Packard <keithp@keithp.com>
Date:   Wed Nov 16 16:26:07 2011 -0800

    drm/i915: Hook up Ivybridge eDP

This fixes eDP link-training failures and cases where all voltage swing
/pre-emphasis levels were tried and failed during clock recovery and -
as a fallback - we go on to do channel equalization with the last voltage
swing/pre-emphasis level which will succeed. Both issues can lead to a
blank screen.

v2:
- improve commit message

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880
Tested-by: Jeremy Moles <cubicool@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Split GMR2_REMAP commands if they are to large

commit 6e4dcff3adbf25acb87e74500a58e3c07bdec40f upstream.

This fixes the piglit test texturing/max-texture-size
causing the VM to die due to a too large SVGA command.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Biran Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: cond_resched() after processing each work item

commit b22ce2785d97423846206cceec4efee0c4afd980 upstream.

If !PREEMPT, a kworker running work items back to back can hog CPU.
This becomes dangerous when a self-requeueing work item which is
waiting for something to happen races against stop_machine.  Such
self-requeueing work item would requeue itself indefinitely hogging
the kworker and CPU it's running on while stop_machine would wait for
that CPU to enter stop_machine while preventing anything else from
happening on all other CPUs.  The two would deadlock.

Jamie Liu reports that this deadlock scenario exists around
scsi_requeue_run_queue() and libata port multiplier support, where one
port may exclude command processing from other ports.  With the right
timing, scsi_requeue_run_queue() can end up requeueing itself trying
to execute an IO which is asked to be retried while another device has
an exclusive access, which in turn can't make forward progress due to
stop_machine.

Fix it by invoking cond_resched() after executing each work item.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jamie Liu <jamieliu@google.com>
References: http://thread.gmane.org/gmane.linux.kernel/1552567
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: check that kmem_cache has memcg_params before accessing it

commit 6f6b8951897e487ea6f77b90ea01f70a9c363770 upstream.

If the system had a few memory groups and all of them were destroyed,
memcg_limited_groups_array_size has non-zero value, but all new caches
are created without memcg_params, because memcg_kmem_enabled() returns
false.

We try to enumirate child caches in a few places and all of them are
potentially dangerous.

For example my kernel is compiled with CONFIG_SLAB and it crashed when I
tryed to mount a NFS share after a few experiments with kmemcg.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffff8118166a>] do_tune_cpucache+0x8a/0xd0
  PGD b942a067 PUD b999f067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in: fscache(+) ip6table_filter ip6_tables iptable_filter ip_tables i2c_piix4 pcspkr virtio_net virtio_balloon i2c_core floppy
  CPU: 0 PID: 357 Comm: modprobe Not tainted 3.11.0-rc7+ #59
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  task: ffff8800b9f98240 ti: ffff8800ba32e000 task.ti: ffff8800ba32e000
  RIP: 0010:[<ffffffff8118166a>]  [<ffffffff8118166a>] do_tune_cpucache+0x8a/0xd0
  RSP: 0018:ffff8800ba32fb70  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
  RDX: 0000000000000000 RSI: ffff8800b9f98910 RDI: 0000000000000246
  RBP: ffff8800ba32fba0 R08: 0000000000000002 R09: 0000000000000004
  R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000010
  R13: 0000000000000008 R14: 00000000000000d0 R15: ffff8800375d0200
  FS:  00007f55f1378740(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 00007f24feba57a0 CR3: 0000000037b51000 CR4: 00000000000006f0
  Call Trace:
    enable_cpucache+0x49/0x100
    setup_cpu_cache+0x215/0x280
    __kmem_cache_create+0x2fa/0x450
    kmem_cache_create_memcg+0x214/0x350
    kmem_cache_create+0x2b/0x30
    fscache_init+0x19b/0x230 [fscache]
    do_one_initcall+0xfa/0x1b0
    load_module+0x1c41/0x26d0
    SyS_finit_module+0x86/0xb0
    system_call_fastpath+0x16/0x1b

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/base/memory.c: fix show_mem_removable() to handle missing sections

commit 21ea9f5ace3a7317cc3ba1fbc749758021a83136 upstream.

"cat /sys/devices/system/memory/memory*/removable" crashed the system.

The problem is that show_mem_removable() is passing a
bad pfn to is_mem_section_removable(), which causes

    if (!node_online(page_to_nid(page)))

to blow up.  Why is it passing in a bad pfn?

The reason is that show_mem_removable() will loop sections_per_block
times.  sections_per_block is 16, but mem->section_count is 8,
indicating holes in this memory block.  Checking that the memory section
is present before checking to see if the memory section is removable
fixes the problem.

   harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable
   0
   1
   1
   1
   1
   1
   1
   1
   1
   1
   1
   1
   1
   1
   BUG: unable to handle kernel paging request at ffffea00c3200000
   IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90
   PGD 83ffd4067 PUD 37bdfce067 PMD 0
   Oops: 0000 [#1] SMP
   Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod
   CPU: 4 PID: 5991 Comm: cat Tainted: G           O 3.11.0-rc5-rja-uv+ #10
   Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013
   task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000
   RIP: 0010:[<ffffffff81117ed1>]  [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90
   RSP: 0018:ffff880820023df8  EFLAGS: 00010287
   RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004
   RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000
   RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001
   R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000
   R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001
   FS:  00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0
   Call Trace:
     show_mem_removable+0x41/0x70
     dev_attr_show+0x2a/0x60
     sysfs_read_file+0xf7/0x1c0
     vfs_read+0xc8/0x130
     SyS_read+0x5d/0xa0
     system_call_fastpath+0x16/0x1b

Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IPC: bugfix for msgrcv with msgtyp < 0

commit 368ae537e056acd3f751fa276f48423f06803922 upstream.

According to 'man msgrcv': "If msgtyp is less than 0, the first message of
the lowest type that is less than or equal to the absolute value of msgtyp
shall be received."

Bug: The kernel only returns a message if its type is 1; other messages
with type < abs(msgtype) will never get returned.

Fix: After having traversed the list to find the first message with the
lowest type, we need to actually return that message.

This regression was introduced by commit daaf74cf0867 ("ipc: refactor
msg list search into separate function")

Signed-off-by: Svenning Soerensen <sss@secomea.dk>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

timer_list: correct the iterator for timer_list

commit 84a78a6504f5c5394a8e558702e5b54131f01d14 upstream.

Correct an issue with /proc/timer_list reported by Holger.

When reading from the proc file with a sufficiently small buffer, 2k so
not really that small, there was one could get hung trying to read the
file a chunk at a time.

The timer_list_start function failed to account for the possibility that
the offset was adjusted outside the timer_list_next.

Signed-off-by: Nathan Zimmer <nzimmer@sgi.com>
Reported-by: Holger Hans Peter Freyther <holger@freyther.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Berke Durak <berke.durak@xiphos.com>
Cc: Jeff Layton <jlayton@redhat.com>
Tested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: Add another missing header for !CONFIG_REGMAP stubs

commit 3f0fa9a808f98fa10a18ba2a73f13d65fda990fb upstream.

The use of WARN_ON() needs the definitions from bug.h, without it
you can get:

include/linux/regmap.h: In function 'regmap_write':
include/linux/regmap.h:525:2: error: implicit declaration of function 'WARN_ONCE' [-Werror=implicit-function-declaration]

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: pm80xx: fix Adaptec 71605H hang

commit 9504a923924d663e1953f872f0a828e6454a6cfc upstream.

The IO command size is 128 bytes for these new controllers as opposed to 64
for the old 8001 controller.

The Adaptec out-of-tree driver did this correctly. After comparing the two
this turned out to be the crucial difference.

So don't hardcode the IO command size, instead use pm8001_ha->iomb_size as
that is the correct value for both old and new controllers.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/hvsi: Increase handshake timeout from 200ms to 400ms.

commit d220980b701d838560a70de691b53be007e99e78 upstream.

This solves a problem observed in kexec'ed kernel where 200ms timeout is
too short and bootconsole fails to initialize. Console did eventually
become workable but much later into the boot process.

Observed timeout was around 260ms, but I decided to make it a little bigger
for more reliability.

This has been tested on Power7 machine with Petitboot as a primary
bootloader and PowerNV firmware.

Signed-off-by: Eugene Surovegin <surovegin@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Don't Oops when accessing /proc/powerpc/lparcfg without hypervisor

commit f5f6cbb61610b7bf9d9d96db9c3979d62a424bab upstream.

/proc/powerpc/lparcfg is an ancient facility (though still actively used)
which allows access to some informations relative to the partition when
running underneath a PAPR compliant hypervisor.

It makes no sense on non-pseries machines. However, currently, not only
can it be created on these if the kernel has pseries support, but accessing
it on such a machine will crash due to trying to do hypervisor calls.

In fact, it should also not do HV calls on older pseries that didn't have
an hypervisor either.

Finally, it has the plumbing to be a module but is a "bool" Kconfig option.

This fixes the whole lot by turning it into a machine_device_initcall
that is only created on pseries, and adding the necessary hypervisor
check before calling the H_GET_EM_PARMS hypercall

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Work around gcc miscompilation of __pa() on 64-bit

commit bdbc29c19b2633b1d9c52638fb732bcde7a2031a upstream.

On 64-bit, __pa(&static_var) gets miscompiled by recent versions of
gcc as something like:

        addis 3,2,.LANCHOR1+4611686018427387904@toc@ha
        addi 3,3,.LANCHOR1+4611686018427387904@toc@l

This ends up effectively ignoring the offset, since its bottom 32 bits
are zero, and means that the result of __pa() still has 0xC in the top
nibble.  This happens with gcc 4.8.1, at least.

To work around this, for 64-bit we make __pa() use an AND operator,
and for symmetry, we make __va() use an OR operator.  Using an AND
operator rather than a subtraction ends up with slightly shorter code
since it can be done with a single clrldi instruction, whereas it
takes three instructions to form the constant (-PAGE_OFFSET) and add
it on.  (Note that MEMORY_START is always 0 on 64-bit.)

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: opti9xx: Fix conflicting driver object name

commit fb615499f0ad28ed74201c1cdfddf9e64e205424 upstream.

The recent commit to delay the release of kobject triggered NULL
dereferences of opti9xx drivers.  The cause is that all
snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers
register the PnP card driver with the very same name, and also
snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with
the same name, too.  When these drivers are built in, quick
"register-release-and-re-register" actions occur, and this results in
Oops because of the same name is assigned to the kobject.

The fix is simply to assign individual names.  As a bonus, by using
KBUILD_MODNAME, the patch reduces more lines than it adds.

The fix is based on the suggestion by Russell King.

Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add inverted digital mic fixup for Acer Aspire One

commit d3d3835ce919438c00c5d1270d6f9d6ffea59d03 upstream.

Yet another entry, just use the existing fixup for this machine, too.

Reported-by: "Nathanael D. Noblet" <nathanael@gnat.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix NULL dereference with CONFIG_SND_DYNAMIC_MINORS=n

commit 2ca320e294a738c9134a71b5029de05edbfc7aad upstream.

Without the dynamic minor assignment, HDMI codec may have less PCM
instances than the number of pins, which eventually leads to Oops.

Reported-by: Stratos Karafotis <stratosk@semaphore.gr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jfs: fix readdir cookie incompatibility with NFSv4

commit 44512449c0ab368889dd13ae0031fba74ee7e1d2 upstream.

NFSv4 reserves readdir cookie values 0-2 for special entries (. and ..),
but jfs allows a value of 2 for a non-special entry. This incompatibility
can result in the nfs client reporting a readdir loop.

This patch doesn't change the value stored internally, but adds one to
the value exposed to the iterate method.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
[bwh: Backported to 3.2:
 - Adjust context
 - s/ctx->pos/filp->f_pos/]
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/mc: fix race condition between constructor and request_irq()

commit 6ff8c76a566f823d796359a6c1d76b7668f1e34d upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.10

bcache: FUA fixes

commit e49c7c374e7aacd1f04ecbc21d9dbbeeea4a77d6 upstream.

Journal writes need to be marked FUA, not just REQ_FLUSH. And btree node
writes have... weird ordering requirements.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: bcache: io.c: fix a potential NULL pointer dereference

commit 5c694129c8db6d89c9be109049a16510b2f70f6d upstream.

bio_alloc_bioset returns NULL on failure. This fix adds a missing check
for potential NULL pointer dereferencing.

Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: fix waiting for hw ready

commit dab9bf41b23fe700c4a74133e41eb6a21706031e upstream.

1. MEI_INTEROP_TIMEOUT is in seconds not in jiffies
so we use mei_secs_to_jiffies macro
While cold boot is fast this is relevant in resume
2. wait_event_interruptible_timeout can return with
-ERESTARTSYS so do not override it with -ETIMEDOUT
3.Adjust error message

Tested-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: don't have to clean the state on power up

commit 99f22c4ef24cf87b0dae6aabe6b5e620b62961d9 upstream.

When powering up, we don't have to clean up the device state
nothing is connected.

Tested-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: fix reset state machine

commit 315a383ad7dbd484fafb93ef08038e3dbafbb7a8 upstream.

ME HW ready bit is down after hw reset was asserted or on error.
Only on error we need to enter the reset flow, additional reset
need to be prevented when reset was triggered during
initialization , power up/down or a reset is already in progress

Tested-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: do not identity map UNUSABLE regions in the machine E820

commit 3bc38cbceb85881a8eb789ee1aa56678038b1909 upstream.

If there are UNUSABLE regions in the machine memory map, dom0 will
attempt to map them 1:1 which is not permitted by Xen and the kernel
will crash.

There isn't anything interesting in the UNUSABLE region that the dom0
kernel needs access to so we can avoid making the 1:1 mapping and
treat it as RAM.

We only do this for dom0, as that is where tboot case shows up.
A PV domU could have an UNUSABLE region in its pseudo-physical map
and would need to be handled in another patch.

This fixes a boot failure on hosts with tboot.

tboot marks a region in the e820 map as unusable and the dom0 kernel
would attempt to map this region and Xen does not permit unusable
regions to be mapped by guests.

  (XEN)  0000000000000000 - 0000000000060000 (usable)
  (XEN)  0000000000060000 - 0000000000068000 (reserved)
  (XEN)  0000000000068000 - 000000000009e000 (usable)
  (XEN)  0000000000100000 - 0000000000800000 (usable)
  (XEN)  0000000000800000 - 0000000000972000 (unusable)

tboot marked this region as unusable.

  (XEN)  0000000000972000 - 00000000cf200000 (usable)
  (XEN)  00000000cf200000 - 00000000cf38f000 (reserved)
  (XEN)  00000000cf38f000 - 00000000cf3ce000 (ACPI data)
  (XEN)  00000000cf3ce000 - 00000000d0000000 (reserved)
  (XEN)  00000000e0000000 - 00000000f0000000 (reserved)
  (XEN)  00000000fe000000 - 0000000100000000 (reserved)
  (XEN)  0000000100000000 - 0000000630000000 (usable)

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[v1: Altered the patch and description with domU's with UNUSABLE regions]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86 get_unmapped_area: Access mmap_legacy_base through mm_struct member

commit 41aacc1eea645c99edbe8fbcf78a97dc9b862adc upstream.

This is the updated version of df54d6fa5427 ("x86 get_unmapped_area():
use proper mmap base for bottom-up direction") that only randomizes the
mmap base address once.

Signed-off-by: Radu Caragea <sinaelgl@gmail.com>
Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Adrian Sendroiu <molecula2788@gmail.com>
Cc: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "x86 get_unmapped_area(): use proper mmap base for bottom-up direction"

commit 5ea80f76a56605a190a7ea16846c82aa63dbd0aa upstream.

This reverts commit df54d6fa54275ce59660453e29d1228c2b45a826.

The commit isn't necessarily wrong, but because it recalculates the
random mmap_base every time, it seems to confuse user memory allocators
that expect contiguous mmap allocations even when the mmap address isn't
specified.

In particular, the MATLAB Java runtime seems to be unhappy. See

  https://bugzilla.kernel.org/show_bug.cgi?id=60774

So we'll want to apply the random offset only once, and Radu has a patch
for that.  Revert this older commit in order to apply the other one.

Reported-by: Jeff Shorey <shoreyjeff@gmail.com>
Cc: Radu Caragea <sinaelgl@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: sg: Fix user memory corruption when SG_IO is interrupted by a signal

commit 35dc248383bbab0a7203fca4d722875bc81ef091 upstream.

There is a nasty bug in the SCSI SG_IO ioctl that in some circumstances
leads to one process writing data into the address space of some other
random unrelated process if the ioctl is interrupted by a signal.
What happens is the following:

 - A process issues an SG_IO ioctl with direction DXFER_FROM_DEV (ie the
   underlying SCSI command will transfer data from the SCSI device to
   the buffer provided in the ioctl)

 - Before the command finishes, a signal is sent to the process waiting
   in the ioctl.  This will end up waking up the sg_ioctl() code:

result = wait_event_interruptible(sfp->read_wait,
(srp_done(sfp, srp) || sdp->detached));

   but neither srp_done() nor sdp->detached is true, so we end up just
   setting srp->orphan and returning to userspace:

srp->orphan = 1;
write_unlock_irq(&sfp->rq_list_lock);
return result; /* -ERESTARTSYS because signal hit process */

   At this point the original process is done with the ioctl and
   blithely goes ahead handling the signal, reissuing the ioctl, etc.

 - Eventually, the SCSI command issued by the first ioctl finishes and
   ends up in sg_rq_end_io().  At the end of that function, we run through:

write_lock_irqsave(&sfp->rq_list_lock, iflags);
if (unlikely(srp->orphan)) {
if (sfp->keep_orphan)
srp->sg_io_owned = 0;
else
done = 0;
}
srp->done = done;
write_unlock_irqrestore(&sfp->rq_list_lock, iflags);

if (likely(done)) {
/* Now wake up any sg_read() that is waiting for this
 * packet.
 */
wake_up_interruptible(&sfp->read_wait);
kill_fasync(&sfp->async_qp, SIGPOLL, POLL_IN);
kref_put(&sfp->f_ref, sg_remove_sfp);
} else {
INIT_WORK(&srp->ew.work, sg_rq_end_io_usercontext);
schedule_work(&srp->ew.work);
}

   Since srp->orphan *is* set, we set done to 0 (assuming the
   userspace app has not set keep_orphan via an SG_SET_KEEP_ORPHAN
   ioctl), and therefore we end up scheduling sg_rq_end_io_usercontext()
   to run in a workqueue.

 - In workqueue context we go through sg_rq_end_io_usercontext() ->
   sg_finish_rem_req() -> blk_rq_unmap_user() -> ... ->
   bio_uncopy_user() -> __bio_copy_iov() -> copy_to_user().

   The key point here is that we are doing copy_to_user() on a
   workqueue -- that is, we're on a kernel thread with current->mm
   equal to whatever random previous user process was scheduled before
   this kernel thread.  So we end up copying whatever data the SCSI
   command returned to the virtual address of the buffer passed into
   the original ioctl, but it's quite likely we do this copying into a
   different address space!

As suggested by James Bottomley <James.Bottomley@hansenpartnership.com>,
add a check for current->mm (which is NULL if we're on a kernel thread
without a real userspace address space) in bio_uncopy_user(), and skip
the copy if we're on a kernel thread.

There's no reason that I can think of for any caller of bio_uncopy_user()
to want to do copying on a kernel thread with a random active userspace
address space.

Huge thanks to Costa Sapuntzakis <costa@purestorage.com> for the
original pointer to this bug in the sg code.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Tested-by: David Milburn <dmilburn@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: lpfc: Don't force CONFIG_GENERIC_CSUM on

commit f5944daa0a72316077435c18a6571e73ed338332 upstream.

We want ppc64 to be able to select between optimised assembly
checksum routines in big endian and the generic lib/checksum.c
routines in little endian.

The lpfc driver is forcing CONFIG_GENERIC_CSUM on which means
we are unable to make the decision to enable it in the arch
Kconfig. If the option exists it is always forced on.

This got introduced in 3.10 via commit 6a7252fdb0c3 ([SCSI] lpfc:
fix up Kconfig dependencies). I spoke to Randy about it and
the original issue was with CRC_T10DIF not being defined.

As such, remove the select of CONFIG_GENERIC_CSUM.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: zfcp: fix schedule-inside-lock in scsi_device list loops

commit 924dd584b198a58aa7cb3efefd8a03326550ce8f upstream.

BUG: sleeping function called from invalid context at kernel/workqueue.c:2752
in_atomic(): 1, irqs_disabled(): 1, pid: 360, name: zfcperp0.0.1700
CPU: 1 Not tainted 3.9.3+ #69
Process zfcperp0.0.1700 (pid: 360, task: 0000000075b7e080, ksp: 000000007476bc30)
<snip>
Call Trace:
([<00000000001165de>] show_trace+0x106/0x154)
 [<00000000001166a0>] show_stack+0x74/0xf4
 [<00000000006ff646>] dump_stack+0xc6/0xd4
 [<000000000017f3a0>] __might_sleep+0x128/0x148
 [<000000000015ece8>] flush_work+0x54/0x1f8
 [<00000000001630de>] __cancel_work_timer+0xc6/0x128
 [<00000000005067ac>] scsi_device_dev_release_usercontext+0x164/0x23c
 [<0000000000161816>] execute_in_process_context+0x96/0xa8
 [<00000000004d33d8>] device_release+0x60/0xc0
 [<000000000048af48>] kobject_release+0xa8/0x1c4
 [<00000000004f4bf2>] __scsi_iterate_devices+0xfa/0x130
 [<000003ff801b307a>] zfcp_erp_strategy+0x4da/0x1014 [zfcp]
 [<000003ff801b3caa>] zfcp_erp_thread+0xf6/0x2b0 [zfcp]
 [<000000000016b75a>] kthread+0xf2/0xfc
 [<000000000070c9de>] kernel_thread_starter+0x6/0xc
 [<000000000070c9d8>] kernel_thread_starter+0x0/0xc

Apparently, the ref_count for some scsi_device drops down to zero,
triggering device removal through execute_in_process_context(), while
the lldd error recovery thread iterates through a scsi device list.
Unfortunately, execute_in_process_context() decides to immediately
execute that device removal function, instead of scheduling asynchronous
execution, since it detects process context and thinks it is safe to do
so. But almost all calls to shost_for_each_device() in our lldd are
inside spin_lock_irq, even in thread context. Obviously, schedule()
inside spin_lock_irq sections is a bad idea.

Change the lldd to use the proper iterator function,
__shost_for_each_device(), in combination with required locking.

Occurences that need to be changed include all calls in zfcp_erp.c,
since those might be executed in zfcp error recovery thread context
with a lock held.

Other occurences of shost_for_each_device() in zfcp_fsf.c do not
need to be changed (no process context, no surrounding locking).

The problem was introduced in Linux 2.6.37 by commit
b62a8d9b45b971a67a0f8413338c230e3117dff5
"[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit".

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCSI: zfcp: fix lock imbalance by reworking request queue locking

commit d79ff142624e1be080ad8d09101f7004d79c36e1 upstream.

This patch adds wait_event_interruptible_lock_irq_timeout(), which is a
straight-forward descendant of wait_event_interruptible_timeout() and
wait_event_interruptible_lock_irq().

The zfcp driver used to call wait_event_interruptible_timeout()
in combination with some intricate and error-prone locking. Using
wait_event_interruptible_lock_irq_timeout() as a replacement
nicely cleans up that locking.

This rework removes a situation that resulted in a locking imbalance
in zfcp_qdio_sbal_get():

BUG: workqueue leaked lock or atomic: events/1/0xffffff00/10
    last function: zfcp_fc_wka_port_offline+0x0/0xa0 [zfcp]

It was introduced by commit c2af7545aaff3495d9bf9a7608c52f0af86fb194
"[SCSI] zfcp: Do not wait for SBALs on stopped queue", which had a new
code path related to ZFCP_STATUS_ADAPTER_QDIOUP that took an early exit
without a required lock being held. The problem occured when a
special, non-SCSI I/O request was being submitted in process context,
when the adapter's queues had been torn down. In this case the bug
surfaced when the Fibre Channel port connection for a well-known address
was closed during a concurrent adapter shut-down procedure, which is a
rare constellation.

This patch also fixes these warnings from the sparse tool (make C=1):

drivers/s390/scsi/zfcp_qdio.c:224:12: warning: context imbalance in
 'zfcp_qdio_sbal_check' - wrong count at exit
drivers/s390/scsi/zfcp_qdio.c:244:5: warning: context imbalance in
 'zfcp_qdio_sbal_get' - unexpected unlock

Last but not least, we get rid of that crappy lock-unlock-lock
sequence at the beginning of the critical section.

It is okay to call zfcp_erp_adapter_reopen() with req_q_lock held.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: disable L1 Active after pci_enable_device

commit eabc4ac5d7606a57ee2b7308cb7323ea8f60183b upstream.

As Arjan pointed out, we mustn't do anything related to PCI
configuration until the device is properly enabled with
pci_enable_device().

Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: dvm: fix calling ieee80211_chswitch_done() with NULL

commit 9186a1fd9ed190739423db84bc344d258ef3e3d7 upstream.

If channel switch is pending and we remove interface we can
crash like showed below due to passing NULL vif to mac80211:

BUG: unable to handle kernel paging request at fffffffffffff8cc
IP: [<ffffffff8130924d>] strnlen+0xd/0x40
Call Trace:
 [<ffffffff8130ad2e>] string.isra.3+0x3e/0xd0
 [<ffffffff8130bf99>] vsnprintf+0x219/0x640
 [<ffffffff8130c481>] vscnprintf+0x11/0x30
 [<ffffffff81061585>] vprintk_emit+0x115/0x4f0
 [<ffffffff81657bd5>] printk+0x61/0x63
 [<ffffffffa048987f>] ieee80211_chswitch_done+0xaf/0xd0 [mac80211]
 [<ffffffffa04e7b34>] iwl_chswitch_done+0x34/0x40 [iwldvm]
 [<ffffffffa04f83c3>] iwlagn_commit_rxon+0x2a3/0xdc0 [iwldvm]
 [<ffffffffa04ebc50>] ? iwlagn_set_rxon_chain+0x180/0x2c0 [iwldvm]
 [<ffffffffa04e5e76>] iwl_set_mode+0x36/0x40 [iwldvm]
 [<ffffffffa04e5f0d>] iwlagn_mac_remove_interface+0x8d/0x1b0 [iwldvm]
 [<ffffffffa0459b3d>] ieee80211_do_stop+0x29d/0x7f0 [mac80211]

This is because we nulify ctx->vif in iwlagn_mac_remove_interface()
before calling some other functions that teardown interface. To fix
just check ctx->vif on iwl_chswitch_done(). We should not call
ieee80211_chswitch_done() as channel switch works were already canceled
by mac80211 in ieee80211_do_stop() -> ieee80211_mgd_stop().

Resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=979581

Reported-by: Lukasz Jagiello <jagiello.lukasz@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: apply behavioral quirks to sil3826 PMP

commit 8ffff94d20b7eb446e848e0046107d51b17a20a8 upstream.

Fixing support for the Silicon Image 3826 port multiplier, by applying
to it the same quirks applied to the Silicon Image 3726.  Specifically
fixes the repeated timeout/reset process which previously afflicted
the 3726, as described from line 290.  Slightly based on notes from:

https://bugzilla.redhat.com/show_bug.cgi?id=890237

Signed-off-by: Terry Suereth <terry.suereth@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hostap: copying wrong data prism2_ioctl_giwaplist()

commit 909bd5926d474e275599094acad986af79671ac9 upstream.

We want the data stored in "addr" and "qual", but the extra ampersands
mean we are copying stack data instead.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sata_fsl: save irqs while coalescing

commit 99bbdfa6bdcb4bdf5be914a48e9b46941bf30819 upstream.

Before this patch, I was seeing the following lockdep splat on my
MPC8315 (PPC32) target:

  [    9.086051] =================================
  [    9.090393] [ INFO: inconsistent lock state ]
  [    9.094744] 3.9.7-ajf-gc39503d #1 Not tainted
  [    9.099087] ---------------------------------
  [    9.103432] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
  [    9.109431] scsi_eh_1/39 [HC1[1]:SC0[0]:HE0:SE1] takes:
  [    9.114642]  (&(&host->lock)->rlock){?.+...}, at: [<c02f4168>] sata_fsl_interrupt+0x50/0x250
  [    9.123137] {HARDIRQ-ON-W} state was registered at:
  [    9.128004]   [<c006cdb8>] lock_acquire+0x90/0xf4
  [    9.132737]   [<c043ef04>] _raw_spin_lock+0x34/0x4c
  [    9.137645]   [<c02f3560>] fsl_sata_set_irq_coalescing+0x68/0x100
  [    9.143750]   [<c02f36a0>] sata_fsl_init_controller+0xa8/0xc0
  [    9.149505]   [<c02f3f10>] sata_fsl_probe+0x17c/0x2e8
  [    9.154568]   [<c02acc90>] driver_probe_device+0x90/0x248
  [    9.159987]   [<c02acf0c>] __driver_attach+0xc4/0xc8
  [    9.164964]   [<c02aae74>] bus_for_each_dev+0x5c/0xa8
  [    9.170028]   [<c02ac218>] bus_add_driver+0x100/0x26c
  [    9.175091]   [<c02ad638>] driver_register+0x88/0x198
  [    9.180155]   [<c0003a24>] do_one_initcall+0x58/0x1b4
  [    9.185226]   [<c05aeeac>] kernel_init_freeable+0x118/0x1c0
  [    9.190823]   [<c0004110>] kernel_init+0x18/0x108
  [    9.195542]   [<c000f6b8>] ret_from_kernel_thread+0x64/0x6c
  [    9.201142] irq event stamp: 160
  [    9.204366] hardirqs last  enabled at (159): [<c043f778>] _raw_spin_unlock_irq+0x30/0x50
  [    9.212469] hardirqs last disabled at (160): [<c000f414>] reenable_mmu+0x30/0x88
  [    9.219867] softirqs last  enabled at (144): [<c002ae5c>] __do_softirq+0x168/0x218
  [    9.227435] softirqs last disabled at (137): [<c002b0d4>] irq_exit+0xa8/0xb4
  [    9.234481]
  [    9.234481] other info that might help us debug this:
  [    9.240995]  Possible unsafe locking scenario:
  [    9.240995]
  [    9.246898]        CPU0
  [    9.249337]        ----
  [    9.251776]   lock(&(&host->lock)->rlock);
  [    9.255878]   <Interrupt>
  [    9.258492]     lock(&(&host->lock)->rlock);
  [    9.262765]
  [    9.262765]  *** DEADLOCK ***
  [    9.262765]
  [    9.268684] no locks held by scsi_eh_1/39.
  [    9.272767]
  [    9.272767] stack backtrace:
  [    9.277117] Call Trace:
  [    9.279589] [cfff9da0] [c0008504] show_stack+0x48/0x150 (unreliable)
  [    9.285972] [cfff9de0] [c0447d5c] print_usage_bug.part.35+0x268/0x27c
  [    9.292425] [cfff9e10] [c006ace4] mark_lock+0x2ac/0x658
  [    9.297660] [cfff9e40] [c006b7e4] __lock_acquire+0x754/0x1840
  [    9.303414] [cfff9ee0] [c006cdb8] lock_acquire+0x90/0xf4
  [    9.308745] [cfff9f20] [c043ef04] _raw_spin_lock+0x34/0x4c
  [    9.314250] [cfff9f30] [c02f4168] sata_fsl_interrupt+0x50/0x250
  [    9.320187] [cfff9f70] [c0079ff0] handle_irq_event_percpu+0x90/0x254
  [    9.326547] [cfff9fc0] [c007a1fc] handle_irq_event+0x48/0x78
  [    9.332220] [cfff9fe0] [c007c95c] handle_level_irq+0x9c/0x104
  [    9.337981] [cfff9ff0] [c000d978] call_handle_irq+0x18/0x28
  [    9.343568] [cc7139f0] [c000608c] do_IRQ+0xf0/0x1a8
  [    9.348464] [cc713a20] [c000fc8c] ret_from_except+0x0/0x14
  [    9.353983] --- Exception: 501 at _raw_spin_unlock_irq+0x40/0x50
  [    9.353983]     LR = _raw_spin_unlock_irq+0x30/0x50
  [    9.364839] [cc713af0] [c043db10] wait_for_common+0xac/0x188
  [    9.370513] [cc713b30] [c02ddee4] ata_exec_internal_sg+0x2b0/0x4f0
  [    9.376699] [cc713be0] [c02de18c] ata_exec_internal+0x68/0xa8
  [    9.382454] [cc713c20] [c02de4b8] ata_dev_read_id+0x158/0x594
  [    9.388205] [cc713ca0] [c02ec244] ata_eh_recover+0xd88/0x13d0
  [    9.393962] [cc713d20] [c02f2520] sata_pmp_error_handler+0xc0/0x8ac
  [    9.400234] [cc713dd0] [c02ecdc8] ata_scsi_port_error_handler+0x464/0x5e8
  [    9.407023] [cc713e10] [c02ecfd0] ata_scsi_error+0x84/0xb8
  [    9.412528] [cc713e40] [c02c4974] scsi_error_handler+0xd8/0x47c
  [    9.418457] [cc713eb0] [c004737c] kthread+0xa8/0xac
  [    9.423355] [cc713f40] [c000f6b8] ret_from_kernel_thread+0x64/0x6c

This fix was suggested by Bhushan Bharat <R65777@freescale.com>, and
was discussed in email at:

  http://linuxppc.10917.n7.nabble.com/MPC8315-reboot-failure-lockdep-splat-possibly-related-tp75162.html

Same patch successfully tested with 3.9.7.  linux-next compiled but
not tested on hardware.

This patch is based off linux-next tag next-20130819
(which is commit 66a01bae29d11916c09f9f5a937cafe7d402e4a5 )

Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy: fix build breakage

commit 52d5b9aba1f5790ca3231c262979c2c3e26dd99b upstream.

Commit 94ae9843 (usb: phy: rename all phy drivers to phy-$name-usb.c)
renamed drivers/usb/phy/otg_fsm.h to drivers/usb/phy/phy-fsm-usb.h
but changed drivers/usb/phy/phy-fsm-usb.c to include not existing
"phy-otg-fsm.h" instead of new "phy-fsm-usb.h". This breaks building:
  ...
  drivers/usb/phy/phy-fsm-usb.c:32:25: fatal error: phy-otg-fsm.h: No such file or directory
  compilation terminated.
  make[3]: *** [drivers/usb/phy/phy-fsm-usb.o] Error 1

This commit also missed to modify drivers/usb/phy/phy-fsl-usb.h
to include new "phy-fsm-usb.h" instead of "otg_fsm.h" resulting
in another build breakage:
  ...
  In file included from drivers/usb/phy/phy-fsl-usb.c:46:0:
  drivers/usb/phy/phy-fsl-usb.h:18:21: fatal error: otg_fsm.h: No such file or directory
  compilation terminated.
  make[3]: *** [drivers/usb/phy/phy-fsl-usb.o] Error 1

Fix both issues.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/platform/olpc/olpc-ec.c: initialise earlier

commit 93dbc1b3b506e16c1f6d5b5dcfe756a85cb1dc58 upstream.

Being a low-level component, various drivers (e.g.  olpc-battery) assume
that it is ok to communicate with the OLPC Embedded Controller during
probe.  Therefore the OLPC EC driver must be initialised before other
drivers try to use it.  This was the case until it was recently moved
out of arch/x86 and restructured around commits ac2504151f5a ("Platform:
OLPC: turn EC driver into a platform_driver") and 85f90cf6ca56 ("x86:
OLPC: switch over to using new EC driver on x86").

Use arch_initcall so that olpc-ec is readied earlier, matching the
previous behaviour.

Fixes a regression introduced in Linux-3.6 where various drivers such as
olpc-battery and olpc-xo1-sci failed to load due to an inability to
communicate with the EC.  The user-visible effect was a lack of battery
monitoring, missing ebook/lid switch input devices, etc.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: Paul Fox <pgf@laptop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection

commit 4bf93b50fd04118ac7f33a3c2b8a0a1f9fa80bc9 upstream.

Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.

The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:

  do {
      wait_for_completion(&segbuf->sb_bio_event);
  } while (--segbuf->sb_nbio > 0);

Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event.  Otherwise,
wait_for_completion() will hang or leak.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error

commit 2df37a19c686c2d7c4e9b4ce1505b5141e3e5552 upstream.

Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection.  The issue was found by Dan Carpenter
and he suggests first version of the fix too.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: fdt: fix memory initialization for expanded DT

commit 9e40127526e857fa3f29d51e83277204fbdfc6ba upstream.

Already existing property flags are filled wrong for properties created from
initial FDT. This could cause problems if this DYNAMIC device-tree functions
are used later, i.e. properties are attached/detached/replaced. Simply dumping
flags from the running system show, that some initial static (not allocated via
kzmalloc()) nodes are marked as dynamic.

I putted some debug extensions to property_proc_show(..) :
..
+       if (OF_IS_DYNAMIC(pp))
+               pr_err("DEBUG: xxx : OF_IS_DYNAMIC\n");
+       if (OF_IS_DETACHED(pp))
+               pr_err("DEBUG: xxx : OF_IS_DETACHED\n");

when you operate on the nodes (e.g.: ~$ cat /proc/device-tree/*some_node*) you
will see that those flags are filled wrong, basically in most cases it will dump
a DYNAMIC or DETACHED status, which is in not true.
(BTW. this OF_IS_DETACHED is a own define for debug purposes which which just
make a test_bit(OF_DETACHED, &x->_flags)

If nodes are dynamic kernel is allowed to kfree() them. But it will crash
attempting to do so on the nodes from FDT -- they are not allocated via
kzmalloc().

Signed-off-by: Wladislav Wiebe <wladislav.kw@gmail.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Invalidate TLBs for the rings after a reset

commit 884020bf3d2a3787a1cc6df902e98e0eec60330b upstream.

After any "soft gfx reset" we must manually invalidate the TLBs
associated with each ring. Empirically, it seems that a
suspend/resume or D3-D0 cycle count as a "soft reset". The symptom is
that the hardware would fail to note the new address for its status
page, and so it would continue to write the shadow registers and
breadcrumbs into the old physical address (now used by something
completely different, scary). Whereas the driver would read the new
status page and never see any progress, it would appear that the GPU
hung immediately upon resume.

Based on a patch by naresh kumar kachhi <naresh.kumar.kacchi@intel.com>

Reported-by: Thiago Macieira <thiago@kde.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64725
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Thiago Macieira <thiago@kde.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix WREG32_OR macro setting bits in a register

commit d43a93c8d9bc4e0dc0293b6458c077c3c797594f upstream.

This bug (introduced in 3.10) in WREG32_OR made
commit d3418eacad403033e95e49dc14afa37c2112c134
"drm/radeon/evergreen: setup HDMI before enabling it"
cause a regression. Sometimes audio over HDMI wasn't working, sometimes
display was corrupted.

This fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60687
https://bugzilla.kernel.org/show_bug.cgi?id=60709
https://bugs.freedesktop.org/show_bug.cgi?id=67767

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>