Amadeusz Żołnowski [Mon, 25 Jun 2012 16:32:02 +0000 (18:32 +0200)]
dracut-lib.sh: Use "$*" instead of "$@" in warn, info, and so on...
"$@" might cause some uneccessary word breaking.
Amadeusz Żołnowski [Mon, 25 Jun 2012 16:32:01 +0000 (18:32 +0200)]
man pages: hostonly mode generates host-specific configuration
This fact hasn't been mentioned.
Amadeusz Żołnowski [Mon, 25 Jun 2012 16:32:00 +0000 (18:32 +0200)]
98usrmount: depend on fs-lib
Harald Hoyer [Fri, 22 Jun 2012 13:49:25 +0000 (15:49 +0200)]
dracut.sh: do not copy devices nodes, mknod them
Harald Hoyer [Fri, 22 Jun 2012 13:35:09 +0000 (15:35 +0200)]
dracut-logger.sh: empty functions for log funcs, which are below level
Harald Hoyer [Fri, 22 Jun 2012 13:34:24 +0000 (15:34 +0200)]
dracut-logger.sh: use (( )) for numeric comparisons
Harald Hoyer [Fri, 22 Jun 2012 13:33:42 +0000 (15:33 +0200)]
modules.d/*/module-setup.sh: no more sourcing of dracutfunctions
Harald Hoyer [Fri, 22 Jun 2012 13:33:15 +0000 (15:33 +0200)]
multipath/module-setup.sh:installkernel() fix return code
Harald Hoyer [Fri, 22 Jun 2012 13:32:15 +0000 (15:32 +0200)]
kernel-modules/module-setup.sh:installkernel() fix return code
Harald Hoyer [Fri, 22 Jun 2012 13:31:26 +0000 (15:31 +0200)]
plymouth/module-setup.sh:installkernel() fix return code
Harald Hoyer [Fri, 22 Jun 2012 13:30:58 +0000 (15:30 +0200)]
iscsi/module-setup.sh: speedup installkernel()
Harald Hoyer [Fri, 22 Jun 2012 13:24:28 +0000 (15:24 +0200)]
network/module-setup.sh: fixed installkernel() return code
Harald Hoyer [Fri, 22 Jun 2012 13:29:04 +0000 (15:29 +0200)]
terminfo/module-setup.sh: speedup install() of all terminfo
Harald Hoyer [Fri, 22 Jun 2012 13:28:23 +0000 (15:28 +0200)]
udev-rules/module-setup.sh: ln with --force
Harald Hoyer [Fri, 22 Jun 2012 13:27:40 +0000 (15:27 +0200)]
no more "mknod" in the initramfs!!
Harald Hoyer [Fri, 22 Jun 2012 13:23:56 +0000 (15:23 +0200)]
bootchart/module-setup.sh: no need for mknod anymore
Harald Hoyer [Fri, 22 Jun 2012 13:21:11 +0000 (15:21 +0200)]
i18n/module-setup.sh:install_all_kbd(): speedup install
Harald Hoyer [Fri, 22 Jun 2012 13:20:06 +0000 (15:20 +0200)]
systemd/module-setup.sh: ln with --force
Harald Hoyer [Fri, 22 Jun 2012 13:19:32 +0000 (15:19 +0200)]
systemd/module-setup.sh: only create empty machine-id if non existing
Harald Hoyer [Fri, 22 Jun 2012 13:18:45 +0000 (15:18 +0200)]
base/module-setup.sh: use --force for ln
Harald Hoyer [Fri, 22 Jun 2012 13:16:55 +0000 (15:16 +0200)]
fs-lib/fs-lib.sh: removed test mounting of btrfs and xfs
mount/umount check only costs time and we fail later anyway.
mount can take very long on large filesystems. Better fail on the real
mount.
Harald Hoyer [Fri, 22 Jun 2012 13:14:27 +0000 (15:14 +0200)]
profile.py: do not count negative timestamp differences
Harald Hoyer [Fri, 22 Jun 2012 13:13:47 +0000 (15:13 +0200)]
dracut.sh: speedup "strip"
Harald Hoyer [Fri, 22 Jun 2012 13:10:11 +0000 (15:10 +0200)]
dracut-functions.sh:find_kernel_modules_by_path() use IFS=:
For modules.dep use simpler IFS=: to read the file.
Harald Hoyer [Fri, 22 Jun 2012 13:09:45 +0000 (15:09 +0200)]
dracut-functions.sh:inst_decompress() simplify function
Harald Hoyer [Fri, 22 Jun 2012 13:09:07 +0000 (15:09 +0200)]
dracut-functions.sh:inst_simple() do inst_symlink for symlinks
Harald Hoyer [Fri, 22 Jun 2012 12:50:06 +0000 (14:50 +0200)]
Add qemu kernel modules, if we detect a qemu instance
Regardless of the host-only setting, add all know kernel driver for qemu
instances to support changing the virtual hardware.
Harald Hoyer [Fri, 22 Jun 2012 06:59:22 +0000 (08:59 +0200)]
dracut-functions.sh: cp with --reflink=auto and --sparse=auto
cp will use COW data copy most of the time. So, it's even better than
hardlink, because we don't have to care about hardlinks, when modifying
files in post.
Harald Hoyer [Fri, 22 Jun 2012 06:58:39 +0000 (08:58 +0200)]
dracut-functions.sh: mksubdirs(): check for dir existence first
Harald Hoyer [Fri, 22 Jun 2012 06:57:20 +0000 (08:57 +0200)]
dracut-functions.sh: replace strstr()
the new strstr() is faster, when compared
Harald Hoyer [Thu, 21 Jun 2012 12:10:41 +0000 (14:10 +0200)]
systemd: add ConditionPathExists=/etc/initrd-release to services
Cong Wang [Thu, 21 Jun 2012 03:44:35 +0000 (11:44 +0800)]
network: support vlan tagged bonding
This patch adds support of vlan tagged bonding, for example,
bond0.2. In case of regression, I also tested bond0 and eth0.2,
all work fine.
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Harald Hoyer [Thu, 21 Jun 2012 08:50:36 +0000 (10:50 +0200)]
systemd/dracut-pre-pivot.sh: copy service files to /run/systemd/system
and remove the last info, so that the journal is not restarted again.
Harald Hoyer [Thu, 21 Jun 2012 08:50:01 +0000 (10:50 +0200)]
systemd: remove old udev services
Harald Hoyer [Thu, 21 Jun 2012 07:24:44 +0000 (09:24 +0200)]
fixed i18n for systemd and include more config files in host-only
Harald Hoyer [Thu, 21 Jun 2012 01:36:58 +0000 (03:36 +0200)]
systemd: remove unneeded systemd services
Harald Hoyer [Wed, 20 Jun 2012 23:57:11 +0000 (01:57 +0200)]
dracut-functions.sh: use "ln -r" instead of shell functions
Harald Hoyer [Wed, 20 Jun 2012 23:20:11 +0000 (01:20 +0200)]
dracut.spec: require systemd >= 44-15
Harald Hoyer [Wed, 20 Jun 2012 23:09:02 +0000 (01:09 +0200)]
dracut.conf.d/fedora.conf.example: make systemd default
Harald Hoyer [Wed, 20 Jun 2012 23:10:13 +0000 (01:10 +0200)]
base/dracut-lib.sh: for systemd start emergency.service
do not spawn the shell, start the emergency.service for systemd
Harald Hoyer [Wed, 20 Jun 2012 23:09:38 +0000 (01:09 +0200)]
base/dracut-lib.sh: change output of info() and warn() for systemd
Harald Hoyer [Wed, 20 Jun 2012 23:08:29 +0000 (01:08 +0200)]
systemd: fixed I/O of services
Harald Hoyer [Wed, 20 Jun 2012 23:08:03 +0000 (01:08 +0200)]
systemd: fixed ordering of services
Harald Hoyer [Wed, 20 Jun 2012 23:07:08 +0000 (01:07 +0200)]
systemd/dracut-pre-udev.service: fixed description
Harald Hoyer [Wed, 20 Jun 2012 23:06:30 +0000 (01:06 +0200)]
systemd/dracut-pre-pivot.sh: remove trailing space
Harald Hoyer [Wed, 20 Jun 2012 23:05:15 +0000 (01:05 +0200)]
systemd/dracut-cmdline: make dracut-cmdline a service
convert dracut-cmdline from hook to service after the journal
Harald Hoyer [Wed, 20 Jun 2012 23:04:15 +0000 (01:04 +0200)]
systemd/dracut-pre-pivot.sh: stop old udev services
Harald Hoyer [Wed, 20 Jun 2012 23:03:22 +0000 (01:03 +0200)]
systemd: do not flock for console
Harald Hoyer [Wed, 20 Jun 2012 23:02:48 +0000 (01:02 +0200)]
systemd: do not redirect to /dev/console
Harald Hoyer [Wed, 20 Jun 2012 23:01:51 +0000 (01:01 +0200)]
systemd: fix emergency.service and rescue.service
Harald Hoyer [Wed, 20 Jun 2012 23:01:07 +0000 (01:01 +0200)]
systemd/module-setup.sh: add old udev systemd services
Harald Hoyer [Wed, 20 Jun 2012 16:34:35 +0000 (18:34 +0200)]
systemd: output all service output to the journal also
Harald Hoyer [Wed, 20 Jun 2012 16:29:42 +0000 (18:29 +0200)]
dracut-shutdown.service: fixed ordering to be before shutdown.target
Harald Hoyer [Wed, 20 Jun 2012 16:28:35 +0000 (18:28 +0200)]
check for arch before installing drivers/s390
Harald Hoyer [Mon, 18 Jun 2012 17:20:39 +0000 (19:20 +0200)]
disable TEST-16-DMSQUASH for now
Harald Hoyer [Mon, 18 Jun 2012 17:28:44 +0000 (19:28 +0200)]
TEST-50-MULTINIC: libnss cleanup
Harald Hoyer [Mon, 18 Jun 2012 17:23:25 +0000 (19:23 +0200)]
TEST-20-NFS: libnss cleanup
Harald Hoyer [Mon, 18 Jun 2012 17:22:35 +0000 (19:22 +0200)]
TEST-50-MULTINIC: add watchdog
Harald Hoyer [Mon, 18 Jun 2012 17:13:09 +0000 (19:13 +0200)]
TEST-20-NFS: add watchdog
Harald Hoyer [Mon, 18 Jun 2012 17:20:16 +0000 (19:20 +0200)]
TEST-01-BASIC: add watchdog
Harald Hoyer [Mon, 18 Jun 2012 17:17:22 +0000 (19:17 +0200)]
add 04watchdog dracut module
Harald Hoyer [Mon, 18 Jun 2012 11:45:13 +0000 (13:45 +0200)]
plymouth: fixed inst_libdir_file() call
https://bugzilla.redhat.com/show_bug.cgi?id=831349
Harald Hoyer [Mon, 18 Jun 2012 11:26:55 +0000 (13:26 +0200)]
iscsi/module-setup.sh: only install s390 driver on s390 arch
Harald Hoyer [Mon, 18 Jun 2012 10:52:39 +0000 (12:52 +0200)]
Set some global variables in dracut-functions.sh
Harald Hoyer [Mon, 18 Jun 2012 10:51:21 +0000 (12:51 +0200)]
fixed instmods() return code and set pipefail globally
Harald Hoyer [Tue, 12 Jun 2012 12:40:43 +0000 (14:40 +0200)]
resolve conflict between cms network rules and default rules
Harald Hoyer [Fri, 15 Jun 2012 09:56:05 +0000 (11:56 +0200)]
Revert "network/ifup.sh: do not default to dhcp, for interfaces without ip=..."
This reverts commit
ede0532c580fdbace548511b07857fb2e004b299.
Harald Hoyer [Fri, 15 Jun 2012 09:55:59 +0000 (11:55 +0200)]
Revert "network/ifup.sh: default to dhcp for BOOTIF"
This reverts commit
bebb12fd0ec3cbb88006e384a9a277391a2f3a37.
Harald Hoyer [Fri, 15 Jun 2012 09:12:46 +0000 (11:12 +0200)]
TEST-50-MULTINIC: install correct nss libs
Harald Hoyer [Fri, 15 Jun 2012 09:12:08 +0000 (11:12 +0200)]
nfs: extend libnss wildcard
Harald Hoyer [Fri, 15 Jun 2012 09:11:30 +0000 (11:11 +0200)]
dracut.sh: unset some variables
Harald Hoyer [Fri, 15 Jun 2012 09:11:10 +0000 (11:11 +0200)]
dracut.sh: output unknown argument
Harald Hoyer [Fri, 15 Jun 2012 07:34:00 +0000 (09:34 +0200)]
dracut-functions.sh: fixup inst_libdir_file() again
Thomas Lange [Thu, 14 Jun 2012 15:42:34 +0000 (17:42 +0200)]
Debian multiarch support
Hi Jon,
here's the diff which works for me. The quotation marks around $@ do
not work for me. Instead of "$@" I must to use $_dir/$@ (or
"$_dir"/$@) but no quotation marks around $@. Could you please review
my patch.
Harald Hoyer [Thu, 14 Jun 2012 11:04:22 +0000 (13:04 +0200)]
add PARTUUID as root=PARTUUID=<partition uuid> parameter
Will Woods [Mon, 11 Jun 2012 17:46:22 +0000 (13:46 -0400)]
ifcfg: fix output for ipv6 static addressing
IPV6 configuration is pretty different than IPV4; write out the correct
set of values to make static IPV6 addressing work.
Will Woods [Mon, 11 Jun 2012 17:46:21 +0000 (13:46 -0400)]
fix ifup for static ipv6
"brd +" is not valid for ipv6. This causes the 'ip addr add' command to
fail with the message "Broadcast can be set only for IPv4 addresses".
So: don't use "brd +" for ipv6.
Harald Hoyer [Tue, 12 Jun 2012 15:35:49 +0000 (11:35 -0400)]
dracut.sh: mkdir $initdir/lib/dracut
Harald Hoyer [Mon, 11 Jun 2012 15:11:49 +0000 (17:11 +0200)]
network/ifup.sh: default to dhcp for BOOTIF
Harald Hoyer [Fri, 8 Jun 2012 10:42:12 +0000 (12:42 +0200)]
mdraid/md-shutdown.sh: check for presence of mdadm
Harald Hoyer [Fri, 8 Jun 2012 10:41:49 +0000 (12:41 +0200)]
dm: check for presence of dmsetup
Harald Hoyer [Fri, 8 Jun 2012 08:41:59 +0000 (10:41 +0200)]
dracut.sh: mkdir of $libdirs at then end
Harald Hoyer [Fri, 8 Jun 2012 08:29:35 +0000 (10:29 +0200)]
s/Unable to process initqueue/Could not boot/g
Harald Hoyer [Fri, 8 Jun 2012 08:28:31 +0000 (10:28 +0200)]
mdraid/md-shutdown.sh: wait until md devices are clean
Harald Hoyer [Thu, 7 Jun 2012 09:31:45 +0000 (11:31 +0200)]
systemd/dracut-initqueue.sh: remove pre-trigger sourcing
Thanks ms77 on #dracut!
Harald Hoyer [Tue, 29 May 2012 14:34:58 +0000 (16:34 +0200)]
network/ifup.sh: do not default to dhcp, for interfaces without ip=...
Don't try to be smarter than the admin configuring the machine.
Does also conflict with other methods trying to setup the interfaces,
like cmsifup.sh from the cms module.
Harald Hoyer [Thu, 7 Jun 2012 08:38:31 +0000 (10:38 +0200)]
systemd: strip down the installation of some unused tools
Harald Hoyer [Wed, 6 Jun 2012 16:20:35 +0000 (18:20 +0200)]
modules are now only handled with /sys/modules and modules.dep
No more "find" and /proc/modules checking. We now rely entirely on
depmod and modules.dep
Harald Hoyer [Wed, 6 Jun 2012 13:12:59 +0000 (15:12 +0200)]
make udevdir systemdutildir systemdsystemunitdir global vars
your distribution should ship those settings in
/etc/dracut.conf.d/01-distro.conf
see dracut.conf.d/fedora.conf.example
Juan RP [Wed, 6 Jun 2012 12:19:59 +0000 (14:19 +0200)]
Avoid annonying warnings when pkg-config is not installed.
Harald Hoyer [Wed, 6 Jun 2012 09:45:30 +0000 (11:45 +0200)]
kernel-modules/module-setup.sh: include omapdrm in the arm modules to include
Harald Hoyer [Tue, 5 Jun 2012 18:23:35 +0000 (20:23 +0200)]
dasd_mod: change rd.dasd to dasd_mod kernel parameter
Harald Hoyer [Mon, 4 Jun 2012 13:23:15 +0000 (15:23 +0200)]
get rid of libdir and usrlibdir
Harald Hoyer [Mon, 4 Jun 2012 12:24:25 +0000 (14:24 +0200)]
version 019
Harald Hoyer [Mon, 4 Jun 2012 12:23:54 +0000 (14:23 +0200)]
NEWS: dracut-019
Harald Hoyer [Mon, 4 Jun 2012 12:00:49 +0000 (14:00 +0200)]
dracut.sh: precopy some essential device nodes
Harald Hoyer [Mon, 4 Jun 2012 11:56:55 +0000 (13:56 +0200)]
systemd/dracut-pre-trigger.sh: fixed rd.udev.{debug|info}
Harald Hoyer [Mon, 4 Jun 2012 11:12:07 +0000 (13:12 +0200)]
systemd/module-setup.sh: package udev in sysinit.target
Harald Hoyer [Mon, 4 Jun 2012 11:11:38 +0000 (13:11 +0200)]
udev-rules: check for systemd-udevd symlink already present
Harald Hoyer [Mon, 4 Jun 2012 10:58:42 +0000 (12:58 +0200)]
use pkg-config to determine the udev directory