scsi: hisi_sas: Change permission of parameter prot_mask

[ Upstream commit c4e070457a93705e56ed06b3910d9e5fe56d3be3 ]

Currently the permission of parameter prot_mask is 0x0, which means that
the member does not appear in sysfs. Change it as other module parameters
to 0444 for world-readable.

[mkp: s/v3/v2/]

Link: https://lore.kernel.org/r/1645703489-87194-2-git-send-email-john.garry@huawei.com
Fixes: d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw")
Reported-by: Yihang Li <liyihang6@hisilicon.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return

[ Upstream commit f7731754fdce33dad19be746f647d6ac47c5d695 ]

The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can
have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator)
mode.

Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es
uses 11 when enabling the regulator at boot.

Make bq24190_vbus_is_enabled() also check for 11 so that it does not
wrongly returns false when the bits are set to 11.

Fixes: 66b6bef2c4e0 ("power: supply: bq24190_charger: Export 5V boost converter as regulator")
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: Fix reference leak in tegra_dsi_ganged_probe

[ Upstream commit 221e3638feb8bc42143833c9a704fa89b6c366bb ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore. Add put_device() call to fix this.

Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext2: correct max file size computing

[ Upstream commit 50b3a818991074177a56c87124c7a7bdf5fa4f67 ]

We need to calculate the max file size accurately if the total blocks
that can address by block tree exceed the upper_limit. But this check is
not correct now, it only compute the total data blocks but missing
metadata blocks are needed. So in the case of "data blocks < upper_limit
&& total blocks > upper_limit", we will get wrong result. Fortunately,
this case could not happen in reality, but it's confused and better to
correct the computing.

  bits   data blocks   metadatablocks   upper_limit
  10        16843020            66051    2147483647
  11       134480396           263171    1073741823
  12      1074791436          1050627     536870911 (*)
  13      8594130956          4198403     268435455 (*)
  14     68736258060         16785411     134217727 (*)
  15    549822930956         67125251      67108863 (*)
  16   4398314962956        268468227      33554431 (*)

  [*] Need to calculate in depth.

Fixes: 1c2d14212b15 ("ext2: Fix underflow in ext2_max_size()")
Link: https://lore.kernel.org/r/20220212050532.179055-1-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: sbs-charger: Don't cancel work that is not initialized

[ Upstream commit de85193cff0d94d030a53656d8fcc41794807bef ]

This driver can use an interrupt or polling in order get the charger's
status.

When using polling, a delayed work is used.

However, the remove() function unconditionally call
cancel_delayed_work_sync(), even if the delayed work is not used and is not
initialized.

In order to fix it, use devm_delayed_work_autocancel() and remove the now
useless remove() function.

Fixes: feb583e37f8a ("power: supply: add sbs-charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

TOMOYO: fix __setup handlers return values

[ Upstream commit 39844b7e3084baecef52d1498b5fa81afa2cefa9 ]

__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.

Using the documented strings "TOMOYO_loader=string1" and
"TOMOYO_trigger=string2" causes an Unknown parameter message:
  Unknown kernel command line parameters
    "BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
     TOMOYO_trigger=string2", will be passed to user space.

and these strings are added to init's environment string space:
  Run /sbin/init as init process
    with arguments:
     /sbin/init
    with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     TOMOYO_loader=string1
     TOMOYO_trigger=string2

With this change, these __setup handlers act as expected,
and init's environment is not polluted with these strings.

Fixes: 0e4ae0e0dec63 ("TOMOYO: Make several options configurable.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: James Morris <jmorris@namei.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: tomoyo-dev-en@lists.osdn.me
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Remove vupdate_int_entry definition

[ Upstream commit 3679b8518cd213c25d555553ef212e233faf698c ]

Remove the vupdate_int_entry definition and utilization to avoid the
following warning by Clang:

drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:410:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(0),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:404:2:
note: previous initialization is here
    vupdate_int_entry(0),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:411:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(1),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:405:2:
note: previous initialization is here
    vupdate_int_entry(1),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:412:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(2),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:406:2:
note: previous initialization is here
    vupdate_int_entry(2),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:413:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(3),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:407:2:
note: previous initialization is here
    vupdate_int_entry(3),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:414:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(4),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:408:2:
note: previous initialization is here
    vupdate_int_entry(4),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:415:2:
warning: initializer overrides prior initialization of this subobject
[-Winitializer-overrides]
    vupdate_no_lock_int_entry(5),
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:280:39:
note: expanded from macro 'vupdate_no_lock_int_entry'
    [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
    ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:409:2:
note: previous initialization is here
    vupdate_int_entry(5),
    ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/irq/dcn21/irq_service_dcn21.c:269:39:
note: expanded from macro 'vupdate_int_entry'
        [DC_IRQ_SOURCE_VUPDATE1 + reg_num] = {\
        ^~
6 warnings generated.

Fixes: 688f97ed3f5e ("drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1")
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Fix the flow of a miss in the allocation of a cache ODP MR

[ Upstream commit 2f0e60d5e9f96341a0c8a01be8878cdb3b29ff20 ]

When an ODP MR cache entry is empty and trying to allocate it, increment
the ent->miss counter and call to queue_adjust_cache_locked() to verify
the entry is balanced.

Fixes: aad719dcf379 ("RDMA/mlx5: Allow MRs to be created in the cache synchronously")
Link: https://lore.kernel.org/r/09503e295276dcacc92cb1d8aef1ad0961c99dc1.1644947594.git.leonro@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix abort all task initialization

[ Upstream commit 7f12845c8389855dbcc67baa068b6832dc4a396e ]

In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:

[  197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[  197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[  197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[  197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[  197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[  197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[  197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[  197.741493] FS:  0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[  197.749659] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[  197.762656] Call Trace:
[  197.765127]  <IRQ>
[  197.767162]  pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[  197.772364]  ? do_raw_spin_unlock+0x54/0x220
[  197.776680]  pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[  197.782406]  process_oq+0xe85/0x7890 [pm80xx]
[  197.786817]  ? lock_acquire+0x194/0x490
[  197.790697]  ? handle_irq_event+0x10e/0x1b0
[  197.794920]  ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[  197.800378]  ? __wake_up_bit+0x100/0x100
[  197.804340]  ? lock_is_held_type+0x98/0x110
[  197.808565]  pm80xx_chip_isr+0x94/0x130 [pm80xx]
[  197.813243]  tasklet_action_common.constprop.0+0x24b/0x2f0
[  197.818785]  __do_softirq+0x1b5/0x82d
[  197.822485]  ? do_raw_spin_unlock+0x54/0x220
[  197.826799]  __irq_exit_rcu+0x17e/0x1e0
[  197.830678]  irq_exit_rcu+0xa/0x20
[  197.834114]  common_interrupt+0x78/0x90
[  197.840051]  </IRQ>
[  197.844236]  <TASK>
[  197.848397]  asm_common_interrupt+0x1e/0x40

Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all().

Link: https://lore.kernel.org/r/20220220031810.738362-17-damien.lemoal@opensource.wdc.com
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix NCQ NON DATA command completion handling

[ Upstream commit 1d6736c3e162061dc811c76e605f35ef3234bffa ]

NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a
register-device-to-host-FIS response is expected for it.

However, for an IO_SUCCESS case, mpi_sata_completion() expects a
set-device-bits-FIS for any ata task with an use_ncq field true, which
includes NCQ NON DATA commands.

Fix this to correctly treat NCQ NON DATA commands as non-data by also
testing for the DMA_NONE DMA direction.

Link: https://lore.kernel.org/r/20220220031810.738362-16-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix NCQ NON DATA command task initialization

[ Upstream commit aa028141ab0bc62c44a84d42f09db35d82df82a2 ]

In the pm8001_chip_sata_req() and pm80xx_chip_sata_req() functions, all
tasks with a DMA direction of DMA_NONE (no data transfer) are initialized
using the ATAP value 0x04. However, NCQ NON DATA commands, while being
DMA_NONE commands are NCQ commands and need to be initialized using the
value 0x07 for ATAP, similarly to other NCQ commands.

Make sure that NCQ NON DATA command tasks are initialized similarly to
other NCQ commands by also testing the task "use_ncq" field in addition to
the DMA direction. While at it, reorganize the code into a chain of if -
else if - else to avoid useless affectations and debug messages.

Link: https://lore.kernel.org/r/20220220031810.738362-15-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()

[ Upstream commit fd6d0e376211d7ed759db96b0fbd9a1cee67d462 ]

Make sure that the __le32 fields of struct sata_cmd are manipulated after
applying the correct endian conversion. That is, use cpu_to_le32() for
assigning values and le32_to_cpu() for consulting a field value.  In
particular, make sure that the calculations for the 4G boundary check are
done using CPU endianness and *not* little endian values. With these fixes,
many sparse warnings are removed.

While at it, fix some code identation and add blank lines after variable
declarations and in some other places to make this code more readable.

Link: https://lore.kernel.org/r/20220220031810.738362-12-damien.lemoal@opensource.wdc.com
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()

[ Upstream commit 970404cc5744b1033b6ee601be4ef0e2d1fbcf72 ]

Make sure that the __le32 fields of struct ssp_ini_io_start_req are
manipulated after applying the correct endian conversion. That is, use
cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field
value. In particular, make sure that the calculations for the 4G boundary
check are done using CPU endianness and *not* little endian values. With
these fixes, many sparse warnings are removed.

While at it, add blank lines after variable declarations and in some other
places to make this code more readable.

Link: https://lore.kernel.org/r/20220220031810.738362-11-damien.lemoal@opensource.wdc.com
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()

[ Upstream commit f8b12dfb476dad38ce755aaf5e2df46f06f1822e ]

All fields of the kek_mgmt_req structure have the type __le32. So make sure
to use cpu_to_le32() to initialize them. This suppresses the sparse
warning:

warning: incorrect type in assignment (different base types)
   expected restricted __le32 [addressable] [assigned] [usertype] new_curidx_ksop
   got int

Link: https://lore.kernel.org/r/20220220031810.738362-10-damien.lemoal@opensource.wdc.com
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()

[ Upstream commit ca374f5d92b8ae778f6a37dd3e7ed809bbf7a953 ]

All fields of the SASProtocolTimerConfig structure have the __le32 type.
As such, use cpu_to_le32() to initialize them. This change suppresses many
sparse warnings:

warning: incorrect type in assignment (different base types)
   expected restricted __le32 [addressable] [usertype] pageCode
   got int

Note that the check to limit the value of the STP_IDLE_TMO field is removed
as this field is initialized using the fixed (and small) value defined by
the STP_IDLE_TIME macro.

The pm8001_dbg() calls printing the values of the SASProtocolTimerConfig
structure fileds are changed to use le32_to_cpu() to present the values in
human readable form.

Link: https://lore.kernel.org/r/20220220031810.738362-9-damien.lemoal@opensource.wdc.com
Fixes: a6cb3d012b98 ("[SCSI] pm80xx: thermal, sas controller config and error handling update")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()

[ Upstream commit bb225b12dbcc82d53d637d10b8d70b64494f8c16 ]

The fields of the set_ctrl_cfg_req structure have the __le32 type, so use
cpu_to_le32() to assign them. This removes the sparse warnings:

warning: incorrect type in assignment (different base types)
    expected restricted __le32
    got unsigned int

Link: https://lore.kernel.org/r/20220220031810.738362-8-damien.lemoal@opensource.wdc.com
Fixes: 842784e0d15b ("pm80xx: Update For Thermal Page Code")
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()

[ Upstream commit cd2268a180117aa8ebb23e090ba204324b2d0e93 ]

The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32.
Assigning a value to it should thus use cpu_to_le32(). This fixes the
sparse warning:

warning: incorrect type in assignment (different base types)
   expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m
   got int

Link: https://lore.kernel.org/r/20220220031810.738362-7-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix command initialization in pm80XX_send_read_log()

[ Upstream commit 1a37b6738b58d86f6b144b3fc754ace0f2e0166d ]

Since the sata_cmd struct is zeroed out before its fields are initialized,
there is no need for using "|=" to initialize the ncqtag_atap_dir_m
field. Using a standard assignment removes the sparse warning:

warning: invalid assignment: |=

Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32()
to generate the assigned value.

Link: https://lore.kernel.org/r/20220220031810.738362-5-damien.lemoal@opensource.wdc.com
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fnic: Fix a tracing statement

[ Upstream commit 3032ed77a28913203a4fe0ab8f05752331af79b3 ]

Report both the command flags and command state instead of only the
command state.

Link: https://lore.kernel.org/r/20220218195117.25689-22-bvanassche@acm.org
Fixes: 4d7007b49d52 ("[SCSI] fnic: Fnic Trace Utility")
Cc: Hiral Patel <hiralpat@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/pci: wake-up devices around reset functions

[ Upstream commit 26a17b12d7f3dd8a7aa45a290e5b46e9cc775ddf ]

If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then the
current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition. For reset-related
functionalities, vfio driver uses PCI reset API's. These
API's internally change the PCI power state back to D0 first if
the device power state is non-D0. This state change to D0 will happen
without the involvement of vfio driver.

Let's consider the following example:

1. The device is in D3hot.
2. User invokes VFIO_DEVICE_RESET ioctl.
3. pci_try_reset_function() will be called which internally
   invokes pci_dev_save_and_disable().
4. pci_set_power_state(dev, PCI_D0) will be called first.
5. pci_save_state() will happen then.

Now, for the devices which has NoSoftRst-, the pci_set_power_state()
can trigger soft reset and the original PCI config state will be lost
at step (4) and this state cannot be restored again. This original PCI
state can include any setting which is performed by SBIOS or host
linux kernel (for example LTR, ASPM L1 substates, etc.). When this
soft reset will be triggered, then all these settings will be reset,
and the device state saved at step (5) will also have this setting
cleared so it cannot be restored. Since the vfio driver only exposes
limited PCI capabilities to its user, so the vfio driver user also
won't have the option to save and restore these capabilities state
either and these original settings will be permanently lost.

For pci_reset_bus() also, we can have the above situation.
The other functions/devices can be in D3hot and the reset will change
the power state of all devices to D0 without the involvement of vfio
driver.

So, before calling any reset-related API's, we need to make sure that
the device state is D0. This is mainly to preserve the state around
soft reset.

For vfio_pci_core_disable(), we use __pci_reset_function_locked()
which internally can use pci_pm_reset() for the function reset.
pci_pm_reset() requires the device power state to be in D0, otherwise
it returns error.

This patch changes the device power state to D0 by invoking
vfio_pci_set_power_state() explicitly before calling any reset related
API's.

Fixes: 51ef3a004b1e ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220217122107.22434-3-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/pci: fix memory leak during D3hot to D0 transition

[ Upstream commit eadf88ecf6ac7d6a9f47a76c6055d9a1987a8991 ]

If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does
not have No_Soft_Reset bit set in its PMCSR config register), then
the current PCI state will be saved locally in
'vfio_pci_core_device::pm_save' during D0->D3hot transition and same
will be restored back during D3hot->D0 transition.
For saving the PCI state locally, pci_store_saved_state() is being
used and the pci_load_and_free_saved_state() will free the allocated
memory.

But for reset related IOCTLs, vfio driver calls PCI reset-related
API's which will internally change the PCI power state back to D0. So,
when the guest resumes, then it will get the current state as D0 and it
will skip the call to vfio_pci_set_power_state() for changing the
power state to D0 explicitly. In this case, the memory pointed by
'pm_save' will never be freed. In a malicious sequence, the state changing
to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be
run in a loop and it can cause an OOM situation.

This patch frees the earlier allocated memory first before overwriting
'pm_save' to prevent the mentioned memory leak.

Fixes: 51ef3a004b1e ("vfio/pci: Restore device state on PM transition")
Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com>
Link: https://lore.kernel.org/r/20220217122107.22434-2-abhsahu@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS

[ Upstream commit 6fc51504388c1a1a53db8faafe9fff78fccc7c87 ]

Explicitly convert unsigned int in the right of the conditional
expression to int to match the left side operand and the return type,
fixing the following compiler warning:

drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned
type in conditional expression [-Wsign-compare]

Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service")
Signed-off-by: Aashish Sharma <shraash@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix dp audio condition

[ Upstream commit 1e0505a5a7a2fea243f8e6d7e13fcde65f9e41bc ]

DP audio enablement code which is comparing intf_type,
DRM_MODE_ENCODER_TMDS (= 2) with DRM_MODE_CONNECTOR_DisplayPort (= 10).
Which would never succeed. Fix it to check for DRM_MODE_ENCODER_TMDS.

Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217035358.465904-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: add DSPP blocks teardown

[ Upstream commit d5c5e78f217172e87d8fb2c3418dd8b58b4adfcb ]

Add missing calls to dpu_hw_dspp_destroy() to free resources allocated
for DSPP hardware blocks.

Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220121210618.3482550-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode

[ Upstream commit bb07af2ed2a47dc6c4d0681f275bb27d4f845465 ]

The dsi_7nm_phy_enable() disagrees with downstream for
glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update
programmed settings to match downstream driver. To remove the
possibility for such errors in future drop less_than_1500_mhz
assignment and specify settings explicitly.

Fixes: 5ac178381d26 ("drm/msm/dsi: support CPHY mode for 7nm pll/phy")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220217000837.435340-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent

[ Upstream commit 3a3ee71bd8e14c5e852c71f317eebfda8f88dff0 ]

All DSI PHY/PLL drivers were referencing their VCO parent clock by a
global name, most of which don't exist or have been renamed.  These
clock drivers seem to function fine without that except the 14nm driver
for sdm6xx [1].

At the same time all DTs provide a "ref" clock as per the requirements
of dsi-phy-common.yaml, but the clock is never used.  This patchset puts
that clock to use without relying on a global clock name, so that all
dependencies are explicitly defined in DT (the firmware) in the end.

Note that this patch intentionally breaks older firmware (DT) that
relies on the clock to be found globally instead.  The only affected
platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is
left in place to accommodate a more graceful transition period.  All
other platforms had the "ref" clock added to their phy node since its
inception, or in a followup patch some time after.  These patches
wrongly assumed that the "ref" clock was actively used and have hence
been listed as "Fixes:" below.
Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of
27MHz pxo clock, which has been addressed in [3].

It is expected that both [2] and [3] are applied to the tree well in
advance of this patch such that any actual breakage is extremely
unlikely, but might still occur if kernel upgrades are performed without
the DT to match.  After some time the fallback for msm8974 can be
removed again as well.

[1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@somainline.org/
[2]: https://lore.kernel.org/linux-arm-msm/20210830175739.143401-1-marijn.suijten@somainline.org/
[3]: https://lore.kernel.org/linux-arm-msm/20210829203027.276143-2-marijn.suijten@somainline.org/

Fixes: 79e51645a1dd ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY")
Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
Fixes: 0c0e72705a33 ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210911131922.387964-2-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: always add fail-safe mode into connector mode list

[ Upstream commit d4aca422539c441a7f3fec749287b36de37d9b6b ]

Some of DP link compliant test expects to return fail-safe mode
if prefer detailed timing mode can not be supported by mainlink's
lane and rate after link training. Therefore add fail-safe mode
into connector mode list as backup mode. This patch fixes test
case 4.2.2.1.

Changes in v2:
-- add Fixes text string

Fixes: 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1643066274-25814-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: stop link training after link training 2 failed

[ Upstream commit 9051d629dbf7a998a40f7eac65a9512b01bc3bb8 ]

Each DP link training contains link training 1 followed by link
training 2.  There is maximum of 5 retries of DP link training
before declared link training failed. It is required to stop link
training at end of link training 2 if it is failed so that next
link training 1 can start freshly. This patch fixes link compliance
test  case 4.3.1.13 (Source Device Link Training EQ Fallback Test).

Changes in v10:
--  group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read

Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: populate connector of struct dp_panel

[ Upstream commit 5e602f5156910c7b19661699896cb6e3fb94fab9 ]

DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.

The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum and hit a NULL pointer dereference error because the
connector pointer is never assigned.

Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()

Changes in V3:
-- remove unhelpful kernel crash trace commit text
-- remove renaming dp_display parameter to dp

Changes in V4:
-- add more details to commit text

Changes in v10:
--  group into one series

Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read

Fixes: 7948fe12d47 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read")
Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: pl353: Set the nand chip node as the flash node

[ Upstream commit a1fe2ace2c39dcdc7c053705459a73b7598b1e4f ]

In devicetree the flash information is embedded within nand chip node,
so during nand chip initialization the nand chip node should be passed
to nand_set_flash_node() api, instead of nand controller node.

Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220209053427.27676-1-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: Fix an error code in iwl_mvm_up()

[ Upstream commit 583d18336abdfb1b355270289ff8f6a2608ba905 ]

Return -ENODEV instead of success on this error path.

Fixes: dd36a507c806 ("iwlwifi: mvm: look for the first supported channel when add/remove phy ctxt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210816183930.GA2068@kili
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: Fix -EIO error code that is never returned

[ Upstream commit c305c94bdc18e45b5ad1db54da4269f8cbfdff6b ]

Currently the error -EIO is being assinged to variable ret when
the READY_BIT is not set but the function iwlagn_mac_start returns
0 rather than ret. Fix this by returning ret instead of 0.

Addresses-Coverity: ("Unused value")
Fixes: 7335613ae27a ("iwlwifi: move all mac80211 related functions to one place")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210907104658.14706-1-colin.king@canonical.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: yoyo: remove DBGI_SRAM address reset writing

[ Upstream commit ce014c9861544bb4e789323d0d8956a5ad262e25 ]

Due to preg protection we cannot write to this register
while FW is running (when FW in Halt it is ok).
since we have some cases that we need to dump this
region while FW is running remove this writing from DRV.
FW will do this writing.

Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.209f3078bc74.I463530bd2f40daedb39f6d9df987bb7cee209033@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: align locking in D3 test debugfs

[ Upstream commit 59e1221f470c2e5d2f2d4c95153edd577a7071c5 ]

Since commit a05829a7222e ("cfg80211: avoid holding the RTNL when
calling the driver") we're not only holding the RTNL when going
in and out of suspend, but also the wiphy->mtx. Add that to the
D3 test debugfs in iwlwifi since it's required for various calls
to mac80211.

Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.fcec0204e162.Ib73bf787ab4d83581de20eb89b1f8dbfcaaad0e3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: don't iterate unadded vifs when handling FW SMPS req

[ Upstream commit 8a265d1a619c16400406c9d598411850ee104aed ]

We may not have all the interfaces added to the driver when we get the
THERMAL_DUAL_CHAIN_REQUEST notification from the FW, so instead of
iterating all vifs to update SMPS, iterate only the ones that are
already assigned.  The interfaces that were not assigned yet, will be
updated accordingly when we start using them.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 2a7ce54ccc23 ("iwlwifi: mvm: honour firmware SMPS requests")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.9416aade2ba0.I0b71142f89e3f158aa058a1dfb2517c8c1fa3726@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: Don't call iwl_mvm_sta_from_mac80211() with NULL sta

[ Upstream commit 30d17c12b0895e15ce22ebc1f52a4ff02df6dbc6 ]

The recent fix for NULL sta in iwl_mvm_get_tx_rate() still has a call
of iwl_mvm_sta_from_mac80211() that may be called with NULL sta.
Although this practically only points to the address and the actual
access doesn't happen due to the conditional evaluation at a later
point, it looks a bit flaky.

This patch drops the temporary variable above and evaluates
iwm_mvm_sta_from_mac80211() directly for avoiding confusions.

Fixes: d599f714b73e ("iwlwifi: mvm: don't crash on invalid rate w/o STA")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220121114024.10454-1-tiwai@suse.de
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: mptcp: add csum mib check for mptcp_connect

[ Upstream commit 24720d7452df2dff2e539d9dff28904e25bb1c6d ]

This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.

In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.

The output looks like this:

ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP   (duration    86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008      ) MPTCP   (duration    66ms) [ FAIL ]
server got 1 data checksum error[s]

Fixes: 94d66ba1d8e48 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dax: make sure inodes are flushed before destroy cache

[ Upstream commit a7e8de822e0b1979f08767c751f6c8a9c1d4ad86 ]

A bug can be triggered by following command

$ modprobe nd_pmem && modprobe -r nd_pmem

[   10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[   10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[   10.062433] Call Trace:
[   10.062673]  dump_stack_lvl+0x34/0x44
[   10.062865]  slab_err+0x90/0xd0
[   10.063619]  __kmem_cache_shutdown+0x13b/0x2f0
[   10.063848]  kmem_cache_destroy+0x4a/0x110
[   10.064058]  __x64_sys_delete_module+0x265/0x300

This is caused by dax_fs_exit() not flushing inodes before destroy cache.
To fix this issue, call rcu_barrier() before destroy cache.

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220212071111.148575-1-ztong0001@gmail.com
Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/cma: Allow XRC INI QPs to set their local ACK timeout

[ Upstream commit 748663c8ccf6b2e5a800de19127c2cc1c4423fd2 ]

XRC INI QPs should be able to adjust their local ACK timeout.

Fixes: 2c1619edef61 ("IB/cma: Define option to set ack timeout and pack tos_set")
Link: https://lore.kernel.org/r/1644421175-31943-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Suggested-by: Avneesh Pant <avneesh.pant@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix memleak in libbpf_netlink_recv()

[ Upstream commit 1b8c924a05934d2e758ec7da7bd217ef8ebd80ce ]

Ensure that libbpf_netlink_recv() frees dynamically allocated buffer in
all code paths.

Fixes: 9c3de619e13e ("libbpf: Use dynamically allocated buffer when receiving netlink messages")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20220217073958.276959-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add affected crtcs to atomic state for dsc mst unplug

[ Upstream commit 128f8ed5902a287a6bb4afe0ffdae8a80b2a64ec ]

[Why]
When display topology changed on DSC hub we add all crtcs with dsc support to
atomic state.
Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors"
However the original implementation may skip crtc if the topology change
caused by unplug.
That potentially could lead to no-lightup or corruption on DSC hub after
unplug event on one of the connectors.

[How]
Update add_affected_mst_dsc_crtcs() to use old connector state
if new connector state has no crtc (undergoes modeset due to unplug)

Fixes: 44be939ff7ac58 ("drm/amd/display: Trigger modesets on MST DSC connectors")

Reviewed-by: Hersen Wu <hersenwu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: enable pm sysfs write for one VF mode

[ Upstream commit e610941c45bad75aa839af015c27d236ab6749e5 ]

[why]
pm sysfs should be writable in one VF mode as is in passthrough

[how]
do not remove write access on pm sysfs if device is in one VF mode

Fixes: 11c9cc95f818 ("amdgpu/pm: Make sysfs pm attributes as read-only for VFs")
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Monk Liu <Monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Fix the error when lookup in no-btf maps

[ Upstream commit edc21dc909c6c133a2727f063eadd7907af51f94 ]

When reworking btf__get_from_id() in commit a19f93cfafdf the error
handling when calling bpf_btf_get_fd_by_id() changed. Before the rework
if bpf_btf_get_fd_by_id() failed the error would not be propagated to
callers of btf__get_from_id(), after the rework it is. This lead to a
change in behavior in print_key_value() that now prints an error when
trying to lookup keys in maps with no btf available.

Fix this by following the way used in dumping maps to allow to look up
keys in no-btf maps, by which it decides whether and where to get the
btf info according to the btf value type.

Fixes: a19f93cfafdf ("libbpf: Add internal helper to load BTF data by FD")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/1644249625-22479-1-git-send-email-yinjun.zhang@corigine.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: anx7625: Fix overflow issue on reading EDID

[ Upstream commit d5c6f647aec9ed524aedd04a3aec5ebc21d39007 ]

The length of EDID block can be longer than 256 bytes, so we should use
`int` instead of `u8` for the `edid_pos` variable.

Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210103827.402436-1-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/ipmmu-vmsa: Check for error num after setting mask

[ Upstream commit 1fdbbfd5099f797a4dac05e7ef0192ba4a9c39b4 ]

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.

Fixes: 1c894225bf5b ("iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20220106024302.2574180-1-jiasheng@iscas.ac.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports

[ Upstream commit a5e5e03e94764148a01757b2fa4737d3445c13a6 ]

Internally kernel prepends all report buffers, for both numbered and
unnumbered reports, with report ID, therefore to properly handle unnumbered
reports we should prepend it ourselves.

For the same reason we should skip the first byte of the buffer when
calling i2c_hid_set_or_send_report() which then will take care of properly
formatting the transfer buffer based on its separate report ID argument
along with report payload.

[jkosina@suse.cz: finalize trimmed sentence in changelog as spotted by Benjamin]
Fixes: 9b5a9ae88573 ("HID: i2c-hid: implement ll_driver transport-layer callbacks")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init

[ Upstream commit 6a4760463dbc6b603690938c468839985189ce0a ]

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes: 8c0984e5a753 ("power: move power supply drivers to power/supply")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Use dynamically allocated buffer when receiving netlink messages

[ Upstream commit 9c3de619e13ee6693ec5ac74f50b7aa89056a70e ]

When receiving netlink messages, libbpf was using a statically allocated
stack buffer of 4k bytes. This happened to work fine on systems with a 4k
page size, but on systems with larger page sizes it can lead to truncated
messages. The user-visible impact of this was that libbpf would insist no
XDP program was attached to some interfaces because that bit of the netlink
message got chopped off.

Fix this by switching to a dynamically allocated buffer; we borrow the
approach from iproute2 of using recvmsg() with MSG_PEEK|MSG_TRUNC to get
the actual size of the pending message before receiving it, adjusting the
buffer as necessary. While we're at it, also add retries on interrupted
system calls around the recvmsg() call.

v2:
  - Move peek logic to libbpf_netlink_recv(), don't double free on ENOMEM.

Fixes: 8bbb77b7c7a2 ("libbpf: Add various netlink helpers")
Reported-by: Zhiqian Guan <zhguan@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20220211234819.612288-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: dw-hdmi: use safe format when first in bridge chain

[ Upstream commit 1528038385c0a706aac9ac165eeb24044fef6825 ]

When the dw-hdmi bridge is in first place of the bridge chain, this
means there is no way to select an input format of the dw-hdmi HW
component.

Since introduction of display-connector, negotiation was broken since
the dw-hdmi negotiation code only worked when the dw-hdmi bridge was
in last position of the bridge chain or behind another bridge also
supporting input & output format negotiation.

Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks")
was introduced to make negotiation work again by making display-connector
act as a pass-through concerning input & output format negotiation.

But in the case where the dw-hdmi is single in the bridge chain, for
example on Renesas SoCs, with the display-connector bridge the dw-hdmi
is no more single, breaking output format.

Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: add proper fixes commit]
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix compilation warning due to mismatched printf format

[ Upstream commit dc37dc617fabfb1c3a16d49f5d8cc20e9e3608ca ]

On ppc64le architecture __s64 is long int and requires %ld. Cast to
ssize_t and use %zd to avoid architecture-specific specifiers.

Fixes: 4172843ed4a3 ("libbpf: Fix signedness bug in btf_dump_array_data()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220209063909.1268319-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net:enetc: allocate CBD ring data memory using DMA coherent methods

[ Upstream commit b3a723dbc94a6e38f67669d03b521edd766ad895 ]

To replace the dma_map_single() stream DMA mapping with DMA coherent
method dma_alloc_coherent() which is more simple.

dma_map_single() found by Tim Gardner not proper. Suggested by Claudiu
Manoil and Jakub Kicinski to use dma_alloc_coherent(). Discussion at:

https://lore.kernel.org/netdev/AM9PR04MB8397F300DECD3C44D2EBD07796BD9@AM9PR04MB8397.eurprd04.prod.outlook.com/t/

Fixes: 888ae5a3952ba ("net: enetc: add tc flower psfp offload driver")
cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/regs: Fix size of CXL Capability Header Register

[ Upstream commit 74b0fe80409733055971bbfaf33c80a33fddeeb3 ]

In CXL 2.0, 8.2.5.1 CXL Capability Header Register: this register
is given as 32 bits.

8.2.3 which covers the CXL 2.0 Component registers, including the
CXL Capability Header Register states that access restrictions
specified in Section 8.2.2 apply.

8.2.2 includes:
* A 32 bit register shall be accessed as a 4 Byte quantity.
...
If these rules are not followed, the behavior is undefined.

Discovered during review of CXL QEMU emulation. Alex Bennée pointed
out there was a comment saying that 4 byte registers must be read
with a 4 byte read, but 8 byte reads were being emulated.

https://lore.kernel.org/qemu-devel/87bkzyd3c7.fsf@linaro.org/

Fixing that, led to this code failing. Whilst a given hardware
implementation 'might' work with an 8 byte read, it should not be relied
upon. The QEMU emulation v5 will return 0 and log the wrong access width.

The code moved, so one fixes tag for where this will directly apply and
also a reference to the earlier introduction of the code for backports.

Fixes: 0f06157e0135 ("cxl/core: Move register mapping infrastructure")
Fixes: 08422378c4ad ("cxl/pci: Add HDM decoder capabilities")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20220201153437.2873-1-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/core: Fix cxl_probe_component_regs() error message

[ Upstream commit d621bc2e7282f9955033a6359877fd4ac4be60e1 ]

Fix a '\n' vs '/n' typo.

Fixes: 08422378c4ad ("cxl/pci: Add HDM decoder capabilities")
Acked-by: Ben Widawsky <ben.widawsky@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164298418268.3018233.17790073375430834911.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix signedness bug in btf_dump_array_data()

[ Upstream commit 4172843ed4a38f97084032f74f07b2037b5da3a6 ]

The btf__resolve_size() function returns negative error codes so
"elem_size" must be signed for the error handling to work.

Fixes: 920d16af9b42 ("libbpf: BTF dumper support for typed data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220208071552.GB10495@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Check the last packet by RXE_END_MASK

[ Upstream commit b1377cc37f6bebd57ce8747b7e16163a475af295 ]

It's wrong to check the last packet by RXE_COMP_MASK because the flag is
to indicate if responder needs to generate a completion.

Fixes: 9fcd67d1772c ("IB/rxe: increment msn only when completing a request")
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20211229034438.1854908-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Fix reading PCI_EXP_RTSTA_PME bit on emulated bridge

[ Upstream commit 735f5ae49e1b44742cc63ca9b5c1ffde3e94ba91 ]

The emulated bridge returns incorrect value for PCI_EXP_RTSTA register
during readout in advk_pci_bridge_emul_pcie_conf_read() function: the
correct bit is BIT(16), but we are setting BIT(23), because the code
does
  *value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16
where
  PCIE_MSG_PM_PME_MASK
is
  BIT(7).

The code should probably have been something like
  *value = (!!(isr0 & PCIE_MSG_PM_PME_MASK)) << 16,
but we are better of using an if() and using the proper macro for this
bit.

Link: https://lore.kernel.org/r/20220110015018.26359-15-kabel@kernel.org
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Fix reading MSI interrupt number

[ Upstream commit 805dfc18dd3d4dd97a987d4406593b5a225b1253 ]

In advk_pcie_handle_msi() it is expected that when bit i in the W1C
register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is
updated to contain the MSI number corresponding to index i.

Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG
always contains the number of the last received MSI, overall.

Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt
number. Since Aardvark already forbids more than 32 interrupts and uses
own allocated hwirq numbers, the msi_idx already corresponds to the
received MSI number.

Link: https://lore.kernel.org/r/20220110015018.26359-3-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: refactor XDP registration

[ Upstream commit e62ad74aa534404b3ee7e250b114a3536ac56987 ]

On changing the RX ring parameters igb uses a hack to avoid a warning
when calling xdp_rxq_info_reg via igb_setup_rx_resources.  It just
clears the struct xdp_rxq_info content.

Instead, change this to unregister if we're already registered.  Align
code to the igc code.

Fixes: 9cbc948b5a20c ("igb: add XDP support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: avoid kernel warning when changing RX ring parameters

[ Upstream commit 453307b569a0d41bddd07f26bf41b784cd82a4c9 ]

Calling ethtool changing the RX ring parameters like this:

  $ ethtool -G eth0 rx 1024

on igc triggers kernel warnings like this:

[  225.198467] ------------[ cut here ]------------
[  225.198473] Missing unregister, handled but fix driver
[  225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168
xdp_rxq_info_reg+0x79/0xd0
[...]
[  225.198601] Call Trace:
[  225.198604]  <TASK>
[  225.198609]  igc_setup_rx_resources+0x3f/0xe0 [igc]
[  225.198617]  igc_ethtool_set_ringparam+0x30e/0x450 [igc]
[  225.198626]  ethnl_set_rings+0x18a/0x250
[  225.198631]  genl_family_rcv_msg_doit+0xca/0x110
[  225.198637]  genl_rcv_msg+0xce/0x1c0
[  225.198640]  ? rings_prepare_data+0x60/0x60
[  225.198644]  ? genl_get_cmd+0xd0/0xd0
[  225.198647]  netlink_rcv_skb+0x4e/0xf0
[  225.198652]  genl_rcv+0x24/0x40
[  225.198655]  netlink_unicast+0x20e/0x330
[  225.198659]  netlink_sendmsg+0x23f/0x480
[  225.198663]  sock_sendmsg+0x5b/0x60
[  225.198667]  __sys_sendto+0xf0/0x160
[  225.198671]  ? handle_mm_fault+0xb2/0x280
[  225.198676]  ? do_user_addr_fault+0x1eb/0x690
[  225.198680]  __x64_sys_sendto+0x20/0x30
[  225.198683]  do_syscall_64+0x38/0x90
[  225.198687]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  225.198693] RIP: 0033:0x7f7ae38ac3aa

igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to
reset the xdp_rxq_info member before calling igc_setup_rx_resources().
This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info.

Make sure to unregister the xdp_rxq_info structure first in
igc_setup_rx_resources.

Fixes: 73f1071c1d29 ("igc: Add support for XDP_TX action")
Reported-by: Lennert Buytenhek <buytenh@arista.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: mchp48l640: Add SPI ID table

[ Upstream commit 69a6d06878f05d63673b0dcdc3c3ef1af2996d46 ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220202143404.16070-4-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: mchp23k256: Add SPI ID table

[ Upstream commit bc7ee2e34b219da6813c17a1680dd20766648883 ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220202143404.16070-3-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()'

[ Upstream commit b205f5850263632b6897d8f0bfaeeea4955f8663 ]

Some resource should be released if an error occurs in
'bcm2835_i2c_probe()'.
Add an error handling path and the needed 'clk_disable_unprepare()' and
'clk_rate_exclusive_put()' calls.

While at it, rework the bottom of the function to use this newly added
error handling path and have an explicit and more standard "return 0;" at
the end of the normal path.

Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[wsa: rebased]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: bcm2835: Use platform_get_irq() to get the interrupt

[ Upstream commit c3b2f911ac11892b672df7829becf28d3a830073 ]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: asix: add proper error handling of usb read errors

[ Upstream commit 920a9fa27e7805499cfe78491b36fed2322c02ec ]

Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.

Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.

So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code.

Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

livepatch: Fix build failure on 32 bits processors

[ Upstream commit 2f293651eca3eacaeb56747dede31edace7329d2 ]

Trying to build livepatch on powerpc/32 results in:

kernel/livepatch/core.c: In function 'klp_resolve_symbols':
kernel/livepatch/core.c:221:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  221 |                 sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
      |                       ^
kernel/livepatch/core.c:221:21: error: assignment to 'Elf32_Sym *' {aka 'struct elf32_sym *'} from incompatible pointer type 'Elf64_Sym *' {aka 'struct elf64_sym *'} [-Werror=incompatible-pointer-types]
  221 |                 sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
      |                     ^
kernel/livepatch/core.c: In function 'klp_apply_section_relocs':
kernel/livepatch/core.c:312:35: error: passing argument 1 of 'klp_resolve_symbols' from incompatible pointer type [-Werror=incompatible-pointer-types]
  312 |         ret = klp_resolve_symbols(sechdrs, strtab, symndx, sec, sec_objname);
      |                                   ^~~~~~~
      |                                   |
      |                                   Elf32_Shdr * {aka struct elf32_shdr *}
kernel/livepatch/core.c:193:44: note: expected 'Elf64_Shdr *' {aka 'struct elf64_shdr *'} but argument is of type 'Elf32_Shdr *' {aka 'struct elf32_shdr *'}
  193 | static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
      |                                ~~~~~~~~~~~~^~~~~~~

Fix it by using the right types instead of forcing 64 bits types.

Fixes: 7c8e2bdd5f0d ("livepatch: Apply vmlinux-specific KLP relocations early")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5288e11b018a762ea3351cc8fb2d4f15093a4457.1640017960.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/dtc: Call pkg-config POSIXly correct

[ Upstream commit a8b309ce9760943486e0585285e0125588a31650 ]

Running with POSIXLY_CORRECT=1 in the environment the scripts/dtc build
fails, because pkg-config doesn't output anything when the flags come
after the arguments.

Fixes: 067c650c456e ("dtc: Use pkg-config to locate libyaml")
Signed-off-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220131112028.7907-1-t@laumann.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: limit bandwidth in HE capabilities

[ Upstream commit 1f2c104448477512fcf7296df54bfbc3a6f9a765 ]

If we're limiting bandwidth for some reason such as regulatory
restrictions, then advertise that limitation just like we do
for VHT today, so the AP is aware we cannot use the higher BW
it might be using.

Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.70c8e3e7ee76.If317630de69ff1146bec7d47f5b83038695eb71d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Remove a couple of obsolete TODO

[ Upstream commit cee04f3c3a00ffd2a2a6ed1028e0ab58a3a28d25 ]

The HE capability IE is an extension IE so remove
an irrelevant comments.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.550b95b5fca7.Ia31395e880172aefcc0a8c70ed060f84b94bdb83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Enable port policy support on 6097

[ Upstream commit 585d42bb57bb358d48906660a8de273b078810b1 ]

This chip has support for the same per-port policy actions found in
later versions of LinkStreet devices.

Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp: unregister virtual clocks when unregistering physical clock.

[ Upstream commit bfcbb76b0f595ea9ede9f7a218086fef85242f10 ]

When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.

This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:

BUG: unable to handle page fault for address: ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
 timecounter_read+0xf/0x50
 ptp_vclock_refresh+0x2c/0x50
 ? ptp_clock_release+0x40/0x40
 ptp_aux_kworker+0x17/0x30
 kthread_worker_fn+0x9b/0x240
 ? kthread_should_park+0x30/0x30
 kthread+0xe2/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30

Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update

[ Upstream commit 6a6f457ed5fdf6777536c20644a9e42128a50ec2 ]

Check sta_rates pointer value in mt7615_sta_rate_tbl_update routine
since minstrel_ht_update_rates can fail allocating rates array.

Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update

[ Upstream commit fc8e2c707ce11c8ec2e992885b0d53a5e04031ac ]

Check sta_rates pointer value in mt7603_sta_rate_tbl_update routine
since minstrel_ht_update_rates can fail allocating rates array.

Fixes: c8846e1015022 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix a leftover race in runtime-pm

[ Upstream commit 42ce8d3b623162f3248db50a38359f294e6b06fd ]

Fix a possible race in mt7615_pm_power_save_work() if rx/tx napi
schedules ps_work and we are currently accessing device register
on a different cpu.

Fixes: db928f1ab9789 ("mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napi")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix a leftover race in runtime-pm

[ Upstream commit 591cdccebdd4d02eb46d400dea911136400cc567 ]

Fix a possible race in mt7921_pm_power_save_work() if rx/tx napi
schedules ps_work and we are currently accessing device register
on a different cpu.

Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv

[ Upstream commit abdb8bc94be4cf68aa71c9a8ee0bad9b3e6f52d3 ]

Similar to mt7915_mcu_wtbl_generic_tlv, rely on vif->bss_conf.aid for
aid in sta mode and not on sta->aid.

Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode

[ Upstream commit a56b1b0f145ef2d6bb9312dedf3ab8558ef50a5b ]

mac80211 provides aid in vif->bss_conf.aid for sta mode and not in
sta->aid. Fix mt7915_mcu_wtbl_generic_tlv routine using proper value for
aid in sta mode.

Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: connac: fix sta_rec_wtbl tag len

[ Upstream commit 74c337ec0905d99111fc63a15f2e0784b9ed5503 ]

Similar to mt7915 driver, fix tag len error for sta_rec_wtbl, which
causes fw parsing error for the tags placed behind it.

Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Don't use perf_hw_context for trace IMC PMU

[ Upstream commit 0198322379c25215b2778482bf1221743a76e2b5 ]

Trace IMC (In-Memory collection counters) in powerpc is useful for
application level profiling.

For trace_imc, presently task context (task_ctx_nr) is set to
perf_hw_context. But perf_hw_context should only be used for CPU PMU.
See commit 26657848502b ("perf/core: Verify we have a single
perf_hw_context PMU").

So for trace_imc, even though it is per thread PMU, it is preferred to
use sw_context in order to be able to do application level monitoring.
Hence change the task_ctx_nr to use perf_sw_context.

Fixes: 012ae244845f ("powerpc/perf: Trace imc PMU functions")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Update subject & incorporate notes into change log, reflow comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202041837.65968-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: Check return value of kvmppc_radix_init

[ Upstream commit 69ab6ac380a00244575de02c406dcb9491bf3368 ]

The return of the function is being shadowed by the call to
kvmppc_uvmem_init.

Fixes: ca9f4942670c ("KVM: PPC: Book3S HV: Support for running secure guests")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125155735.1018683-2-farosas@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch

[ Upstream commit 5ebb74749202a25da4b3cc2eb15470225a05527c ]

On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.

This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.

This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.

Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ray_cs: Check ioremap return value

[ Upstream commit 7e4760713391ee46dc913194b33ae234389a174e ]

As the possible failure of the ioremap(), the 'local->sram' and other
two could be NULL.
Therefore it should be better to check it in order to avoid the later
dev_dbg.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211230022926.1846757-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe

[ Upstream commit ba18dad0fb880cd29aa97b6b75560ef14d1061ba ]

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: respect metadata on XSK Rx to skb

[ Upstream commit f322a620be69e95594eda89502b478aa7dbf6ec2 ]

For now, if the XDP prog returns XDP_PASS on XSK, the metadata
will be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ixgbe_construct_skb().

Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

[ Upstream commit 8f405221a73a53234486c185d8ef647377a53cc6 ]

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ixgbe_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly

[ Upstream commit 1fbdaa13386804a31eefd3db3c5fe00e80ce9bc3 ]

To not dereference bi->xdp each time in ixgbe_construct_skb_zc(),
pass bi->xdp as an argument instead of bi. We can also call
xsk_buff_free() outside of the function as well as assign bi->xdp
to NULL, which seems to make it closer to its name.

Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

[ Upstream commit f9e61d365bafdee40fe2586fc6be490c3e824dad ]

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, igc_construct_skb_zc() currently allocates and reserves
additional `xdp->data_meta - xdp->data_hard_start`, which is about
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only (+ meta) to
__napi_alloc_skb() and don't reserve anything. This will give
enough headroom for stack processing.
Also, net_prefetch() xdp->data_meta and align the copy size to
speed-up memcpy() a little and better match igc_construct_skb().

Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: respect metadata on XSK Rx to skb

[ Upstream commit 6dba29537c0f639b482bd8f8bbd50ab4ae74b48d ]

For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().

Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

[ Upstream commit bc97f9c6f988b31b728eb47a94ca825401dbeffe ]

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: timestamping: Fix bind_phc check

[ Upstream commit 678dfd5280341d877ca646499bfdc82a3d8b4356 ]

timestamping checks socket options during initialisation. For the field
bind_phc of the socket option SO_TIMESTAMPING it expects the value -1 if
PHC is not bound. Actually the value of bind_phc is 0 if PHC is not
bound. This results in the following output:

SIOCSHWTSTAMP: tx_type 0 requested, got 0; rx_filter 0 requested, got 0
SO_TIMESTAMP 0
SO_TIMESTAMPNS 0
SO_TIMESTAMPING flags 0, bind phc 0
   not expected, flags 0, bind phc -1

This is fixed by setting default value and expected value of bind_phc to
0.

Fixes: 2214d7032479 ("selftests/net: timestamping: support binding PHC")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Fix vmx/vsx mixup in mmio emulation

[ Upstream commit b99234b918c6e36b9aa0a5b2981e86b6bd11f8e2 ]

The MMIO emulation code for vector instructions is duplicated between
VSX and VMX. When emulating VMX we should check the VMX copy size
instead of the VSX one.

Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction ...")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125215655.1026224-3-farosas@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Set MR type in ib_reg_user_mr

[ Upstream commit 32a88d16615c2be295571c29273c4ac94cb75309 ]

Add missing assignment of MR type to IB_MR_TYPE_USER.

Fixes: 33006bd4f37f ("IB/core: Introduce ib_reg_user_mr")
Link: https://lore.kernel.org/r/be2e91bcd6e52dc36be289ae92f30d3a5cc6dcb1.1642491047.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k_htc: fix uninit value bugs

[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ]

Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.

In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.

htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy

Fail logs:

BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
 hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
 htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...

Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00

BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
 hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
 htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...

Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+f83a1df1ed4f67e8d8ad@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220115122733.11160-1-paskripkin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf/test_xdp_redirect_multi: use temp netns for testing

[ Upstream commit cec74489a8dee93053340ec88ea938ff4008c3c0 ]

Use temp netns instead of hard code name for testing in case the netns
already exists.

Remove the hard code interface index when creating the veth interfaces.
Because when the system loads some virtual interface modules, e.g. tunnels.
the ifindex of 2 will be used and the cmd will fail.

As the netns has not created if checking environment failed. Trap the
clean up function after checking env.

Fixes: 8955c1a32987 ("selftests/bpf/xdp_redirect_multi: Limit the tests in netns")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20220125081717.1260849-2-liuhangbin@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Normalize XDP section names in selftests

[ Upstream commit 8fffa0e3451abdd84e4b4e427f7e66040eb24f43 ]

Convert almost all SEC("xdp_blah") uses to strict SEC("xdp") to comply
with strict libbpf 1.0 logic of exact section name match for XDP program
types. There is only one exception, which is only tested through
iproute2 and defines multiple XDP programs within the same BPF object.
Given iproute2 still works in non-strict libbpf mode and it doesn't have
means to specify XDP programs by its name (not section name/title),
leave that single file alone for now until iproute2 gains lookup by
function/program name.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: at803x: move page selection fix to config_init

[ Upstream commit 4f3a00c7f5b2cfe4e127fd3fe49b55e1b318c01f ]

The fix to select the copper page on AR8031 was being done in the probe
function rather than config_init, so it would not be redone after resume
from suspend. Move this to config_init so it is always redone when
needed.

Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function

[ Upstream commit 430e6a0212b2a0eb1de5e9d47a016fa79edf3978 ]

clang static analysis reports this represenative problem
amdgpu_smu.c:144:18: warning: The left operand of '*' is a garbage value
        return clk_freq * 100;
               ~~~~~~~~ ^

If there is no get_dpm_ultimate_freq function,
smu_get_dpm_freq_range returns success without setting the
output min,max parameters.  So return an -ENOTSUPP error.

Fixes: e5ef784b1e17 ("drm/amd/powerplay: revise calling chain on retrieving frequency range")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()

[ Upstream commit 588a70177df3b1777484267584ef38ab2ca899a2 ]

In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode()
is assigned to mode and is passed to drm_mode_probed_add() directly after
that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and
there is a dereference of it in list_add_tail() without recoveries, which
could lead to NULL pointer dereference on failure of
amdgpu_dm_create_common_mode().

Fix this by adding a NULL check of mode.

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: e7b07ceef2a6 ("drm/amd/display: Merge amdgpu_dm_types and amdgpu_dm")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()

[ Upstream commit 2343bcdb4747d4f418a4daf2e898b94f86c24a59 ]

In nvkm_acr_hsfw_load_bl(), the return value of kmalloc() is directly
passed to memcpy(), which could lead to undefined behavior on failure
of kmalloc().

Fix this bug by using kmemdup() instead of kmalloc()+memcpy().

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124165856.57022-1-zhou1615@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: Don't send reset commands if FW isn't running

[ Upstream commit b8fd0271dad00b953caaabe73474788d3d19e252 ]

It's possible the FW is already shutting down while the driver is being
removed and/or when the driver is going through reset. This can cause
unexpected/unnecessary errors to be printed:

eth0: DEV_CMD IONIC_CMD_PORT_RESET (12) error, IONIC_RC_ERROR (29) failed
eth1: DEV_CMD IONIC_CMD_RESET (3) error, IONIC_RC_ERROR (29) failed

Fix this by checking the FW status register before issuing the reset
commands.

Also, since err may not be assigned in ionic_port_reset(), assign it a
default value of 0, and remove an unnecessary log message.

Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: start watchdog after all is setup

[ Upstream commit 9ad2939a1525962a79a2fd974ec7e3a71455b964 ]

The watchdog expects the lif to fully exist when it goes off,
so lets not start the watchdog until all is ready in case there
is some quirky time dialation that makes probe take multiple
seconds.

Fixes: 089406bc5ad6 ("ionic: add a watchdog timer to monitor heartbeat")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>