drm/gma500: Remove 2D accel code

2D acceleration is only available on PSB and MRST and very slow on both
platforms. CPU acceleration is faster so don't bother with 2D accel
anymore.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201115175420.32167-1-patrik.r.jakobsson@gmail.com

drm/gma500: Remove GTT roll support

GTT roll support was used to accelerate fb panning on some machines.
Unfortunately this never worked properly with multiple monitors and
caused issues on others where the framebuffer wouldn't fit in stolen
memory. Let's remove it!

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028143608.1284-1-patrik.r.jakobsson@gmail.com

drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devices

The OnePlus 6/T devices use different panels however they are
functionally identical with the only differences being the resolution.
The panels also don't seem to be used by any other devices, just combine
them into one driver.

The panels are: samsung,sofef00
and             samsung,s6e3fc2x01

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-2-caleb@connolly.tech

dt-bindings: panel-simple-dsi: add samsung panels for OnePlus 6/T

Add compatibles for the samsung,sofef00 and samsung,s6e3fc2x01 panels
used in the OnePlus 6 & 6T respectively.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-3-caleb@connolly.tech

drm/panel/panel-tpo-tpg110: Correct misnaming and supply missing param description

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/panel/panel-tpo-tpg110.c:94: warning: Function parameter or member 'panel_mode' not described in 'tpg110'
 drivers/gpu/drm/panel/panel-tpo-tpg110.c:372: warning: Function parameter or member 'connector' not described in 'tpg110_get_modes'

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113134938.4004947-14-lee.jones@linaro.org

drm: add debug logs for drm_mode_atomic_ioctl errors

Be nice to user-space and log what happened when returning EINVAL in
drm_mode_atomic_ioctl.

v2:

- Migrate to drm_dbg_atomic (Sam)
- Add debug log for arg->reserved (Ville)
- Drop redundant "atomic" word in log messages (Ville)

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/AVFi5ZzKwRVLtY8AQyxvqgIbcUfVgNebOtGVwSNMKvs@cp4-web-038.plabs.ch

drm: convert drm_atomic_uapi.c to new debug helpers

Migrate from DRM_DEBUG_ATOMIC to drm_dbg_atomic.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/FpVdsmqIh7IkH7YIwBjmp5ict1qi4NZlwHrIps@cp4-web-034.plabs.ch

drm/ttm: fix missing NULL check in the new page pool

The pool parameter can be NULL if we free through the shrinker.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Reported-by: Andy Lavr <andy.lavr@gmail.com>
Tested-by: Andy Lavr <andy.lavr@gmail.com>
Link: https://patchwork.freedesktop.org/patch/399365/

drm/udl: Fix missing error code in udl_handle_damage()

If udl_get_urb() fails then this should return a negative error code
but currently it returns success.

Fixes: 798ce3fe1c3a ("drm/udl: Begin/end access to imported buffers in damage-handler")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113101502.GD168908@mwanda

drm/via/via_dma: Remove set but unused variable 'agp_base'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/via/via_dma.c: In function ‘via_cmdbuf_jump’:
 drivers/gpu/drm/via/via_dma.c:596:11: warning: variable ‘agp_base’ set but not used [-Wunused-but-set-variable]

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-5-lee.jones@linaro.org

drm/sti/sti_hdmi: Move 'colorspace_mode_names' array to where its used

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/sti/sti_hdmi.h:36:40: warning: ‘colorspace_mode_names’ defined but not used [-Wunused-const-variable=]
 36 | static const struct drm_prop_enum_list colorspace_mode_names[] = {
 | ^~~~~~~~~~~~~~~~~~~~~

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-28-lee.jones@linaro.org

include: drm: drm_atomic: Artificially use 'crtc' to avoid 'not used' warning

The precedent has already been set by other macros in the same file.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vkms/vkms_drv.c:55:19: warning: variable ‘crtc’ set but not used [-Wunused-but-set-variable]
 55 | struct drm_crtc *crtc;
 | ^~~~

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-3-lee.jones@linaro.org

drm/savage/savage_bci: Remove set but never used 'aper_rsrc' and 'fb_rsrc'

The comment about them (also removed) says:

 /* fb_rsrc and aper_rsrc aren't really used currently, but still exist
  * in case we decide we need information on the BAR for BSD in the
  * future.
  */

Well that was written 12 years ago in 2008.  We are now in the future
and they are still superfluous.  We can always add them again at a
later date if they are ever required.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/savage/savage_bci.c: In function ‘savage_driver_firstopen’:
 drivers/gpu/drm/savage/savage_bci.c:580:24: warning: variable ‘aper_rsrc’ set but not used [-Wunused-but-set-variable]
 drivers/gpu/drm/savage/savage_bci.c:580:15: warning: variable ‘fb_rsrc’ set but not used [-Wunused-but-set-variable]

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-2-lee.jones@linaro.org

drm/atmel-hlcdc/atmel_hlcdc_plane: Fix documentation formatting and add missing description

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:283:6: warning: no previous prototype for ‘atmel_hlcdc_plane_setup_scaler’ [-Wmissing-prototypes]
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:44: warning: cannot understand function prototype: 'struct atmel_hlcdc_plane_state '

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-18-lee.jones@linaro.org

drm/atmel-hlcdc/atmel_hlcdc_plane: Staticise local function 'atmel_hlcdc_plane_setup_scaler()'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:283:6: warning: no previous prototype for ‘atmel_hlcdc_plane_setup_scaler’ [-Wmissing-prototypes]

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-17-lee.jones@linaro.org

drm/atmel-hlcdc/atmel_hlcdc_crtc: Apply correct formatting to struct docs

And fix-up a misnamed member description.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c:33: warning: cannot understand function prototype: 'struct atmel_hlcdc_crtc_state '
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c:52: warning: cannot understand function prototype: 'struct atmel_hlcdc_crtc '

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-14-lee.jones@linaro.org

drm/kmb: fix spelling mistakes in drm_info and drm_dbg messages

There are two spelling mistakes of the word sync in drm_info
and drm_dbg messages. Fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109111225.1485190-1-colin.king@canonical.com

drm/kmb: Fix build warnings

Fixed the following W=1 kernel build warnings
 drivers/gpu/drm/kmb/kmb_plane.h:74:18: warning: ‘kmb_formats_v’
 defined but not used [-Wunused-const-variable=]
 drivers/gpu/drm/kmb/kmb_plane.h:61:18: warning: ‘kmb_formats_g’
 defined but not used [-Wunused-const-variable=]

Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1605045169-2696-1-git-send-email-anitha.chrisanthus@intel.com

drm/nouveau: Fix out-of-bounds access when deferencing MMU type

The value of struct drm_device.ttm.type_vram can become -1 for unknown
types of memory (see nouveau_ttm_init()). This leads to an out-of-bounds
error when accessing struct nvif_mmu.type[]:

  [   18.304116] ==================================================================
  [   18.311649] BUG: KASAN: slab-out-of-bounds in nouveau_ttm_io_mem_reserve+0x17a/0x7e0 [nouveau]
  [   18.320415] Read of size 1 at addr ffff88810ffac1fe by task systemd-udevd/342
  [   18.327681]
  [   18.329208] CPU: 1 PID: 342 Comm: systemd-udevd Tainted: G            E     5.10.0-rc2-1-default+ #581
  [   18.338681] Hardware name: Dell Inc. OptiPlex 9020/0N4YC8, BIOS A24 10/24/2018
  [   18.346032] Call Trace:
  [   18.348536]  dump_stack+0xae/0xe5
  [   18.351919]  print_address_description.constprop.0+0x17/0xf0
  [   18.357787]  ? nouveau_ttm_io_mem_reserve+0x17a/0x7e0 [nouveau]
  [   18.363818]  __kasan_report.cold+0x20/0x38
  [   18.368099]  ? nouveau_ttm_io_mem_reserve+0x17a/0x7e0 [nouveau]
  [   18.374133]  kasan_report+0x3a/0x50
  [   18.377789]  nouveau_ttm_io_mem_reserve+0x17a/0x7e0 [nouveau]
  <...>
  [   18.767690] Allocated by task 342:
  [   18.773087]  kasan_save_stack+0x1b/0x40
  [   18.778890]  __kasan_kmalloc.constprop.0+0xbf/0xd0
  [   18.785646]  __kmalloc_track_caller+0x1be/0x390
  [   18.792165]  kstrdup_const+0x46/0x70
  [   18.797686]  kobject_set_name_vargs+0x2f/0xb0
  [   18.803992]  kobject_init_and_add+0x9d/0xf0
  [   18.810117]  ttm_mem_global_init+0x12c/0x210 [ttm]
  [   18.816853]  ttm_bo_global_init+0x4a/0x160 [ttm]
  [   18.823420]  ttm_bo_device_init+0x39/0x220 [ttm]
  [   18.830046]  nouveau_ttm_init+0x2c3/0x830 [nouveau]
  [   18.836929]  nouveau_drm_device_init+0x1b4/0x3f0 [nouveau]
  <...>
  [   19.105336] ==================================================================

Fix this error, by not using type_vram as an index if it's negative.
Assume default values instead.

The error was seen on Nvidia G72 hardware.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Fixes: 1cf65c45183a ("drm/ttm: add caching state to ttm_bus_placement")
Cc: Christian König <christian.koenig@amd.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201110133655.13174-1-tzimmermann@suse.de

dma-buf: Document that dma-buf size is fixed

The fact that the size of dma-buf is invariant over the lifetime of the
buffer is mentioned in the comment of 'dma_buf_ops.mmap', but is not
documented at where the info is defined. Add the missing documentation.

Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1605044477-51833-7-git-send-email-jianxin.xiong@intel.com

drm/ingenic: ipu: Search for scaling coefs up to 102% of the screen

Increase the scaled image's theorical width/height until we find a
configuration that has valid scaling coefficients, up to 102% of the
screen's resolution. This makes sure that we can scale from almost
every resolution possible at the cost of a very small distorsion.
The CRTC_W / CRTC_H are not modified.

This algorithm was already in place but would not try to go above the
screen's resolution, and as a result would only work if the CRTC_W /
CRTC_H were smaller than the screen resolution. It will now try until it
reaches 102% of the screen's resolution.

Note that this algorithm exists mostly as a band-aid for a missing
functionality: it is not possible for userspace to request the closest
mode that would encapsulate the provided one, because the GEM buffer is
created beforehand. If there was a way to let the kernel tweak the mode,
I could write a better algorithm that would result in a better looking
picture.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105083905.8780-1-paul@crapouillou.net

drm/radeon/ttm: use multihop

This removes the code to move resources directly between
SYSTEM and VRAM in favour of using the core ttm mulithop code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-5-airlied@gmail.com

drm/nouveau/ttm: use multihop

This removes the code to move resources directly between
SYSTEM and VRAM in favour of using the core ttm mulithop code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-4-airlied@gmail.com

drm/amdgpu/ttm: use multihop

This removes the code to move resources directly between
SYSTEM and VRAM in favour of using the core ttm mulithop code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-3-airlied@gmail.com

drm/ttm: add multihop infrastrucutre (v3)

Currently drivers get called to move a buffer, but if they have to
move it temporarily through another space (SYSTEM->VRAM via TT)
then they can end up with a lot of ttm->driver->ttm call stacks,
if the temprorary space moves requires eviction.

Instead of letting the driver do all the placement/space for the
temporary, allow it to report back (-EMULTIHOP) and a placement (hop)
to the move code, which will then do the temporary move, and the
correct placement move afterwards.

This removes a lot of code from drivers, at the expense of
adding some midlayering. I've some further ideas on how to turn
it inside out, but I think this is a good solution to the call
stack problems.

v2: separate out the driver patches, add WARN for getting
MULTHOP in paths we shouldn't (Daniel)
v3: use memset (Christian)

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: hristian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-2-airlied@gmail.com

Revert "drm/dp_mst: Retrieve extended DPCD caps for topology manager"

This reverts commit ad44c03208e46b83e4ae3269e32c9e524aa71cf8.

Currently DRM driver assume the source device caps is higher than the MST device
caps. With this commit, this statement would be broken.

e.g. the source device only support DP1.2 and the mst device support DP1.4.

Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103034907.72129-1-koba.ko@canonical.com

drm: remove pgprot_decrypted() before calls to io_remap_pfn_range()

commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") moves the pgprot_decrypted() into
io_remap_pfn_range(). Delete any, now confusing, open coded calls that
directly precede io_remap_pfn_range():

- drm_io_prot() is only in drm_mmap_locked() to call io_remap_pfn_range()

- fb_mmap() immediately calls vm_iomap_memory() which is a convenience
  wrapper for io_remap_pfn_range()

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/0-v1-2e6a0db57868+166-drm_sme_clean_jgg@nvidia.com

drm: DRM_KMB_DISPLAY should depend on ARCH_KEEMBAY

The Intel Keem Bay display controller is only present on Intel Keem Bay
SoCs.  Hence add a dependency on ARCH_KEEMBAY, to prevent asking the
user about this driver when configuring a kernel without Intel Keem Bay
platform support.

Note that:
  1. The dependency on ARM is dropped, as Keem Bay SoCs are only
     supported in arm64 kernel builds,
  2. The dependencies on OF and COMMON_CLK can be dropped for
     compile-testing, as the driver builds fine regardless.

Fixes: ed794057b052b52a ("drm/kmb: Build files for KeemBay Display driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110144350.3279147-1-geert+renesas@glider.be

drm: DRM_KMB_DISPLAY should select DRM_MIPI_DSI

If CONFIG_DRM_MIPI_DSI=n:

    aarch64-linux-gnu-ld: drivers/gpu/drm/kmb/kmb_dsi.o: in function `kmb_dsi_host_unregister':
    kmb_dsi.c:(.text+0xa48): undefined reference to `mipi_dsi_host_unregister'
    aarch64-linux-gnu-ld: drivers/gpu/drm/kmb/kmb_dsi.o: in function `kmb_dsi_host_bridge_init':
    kmb_dsi.c:(.text+0xb14): undefined reference to `mipi_dsi_host_register'

Fix this be selecting DRM_MIPI_DSI, like other drivers do.

Fixes: ed794057b052b52a ("drm/kmb: Build files for KeemBay Display driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110144219.3278831-1-geert+renesas@glider.be

Merge drm/drm-next into drm-misc-next

We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm: mxsfb: Implement .format_mod_supported

This will make sure applications which use the IN_FORMATS blob
to figure out which modifiers they can use will pick up the
linear modifier which is needed by mxsfb. Such applications
will not work otherwise if an incompatible implicit modifier
ends up being selected.

Before commit ae1ed0093281 ("drm: mxsfb: Stop using DRM simple
display pipeline helper"), the DRM simple display pipeline
helper took care of this.

Signed-off-by: Daniel Abrecht <public@danielabrecht.ch>
Fixes: ae1ed0093281 ("drm: mxsfb: Stop using DRM simple display pipeline helper")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/2a99ffffc2378209307e0992a6e97e70@nodmarc.danielabrecht.ch

drm/vgem: replace idr_init() by idr_init_base()

idr_init() uses base 0 which is an invalid identifier. The new function
idr_init_base allows IDR to set the ID lookup from base 1. This avoids
all lookups that otherwise starts from 0 since 0 is always unused.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105173646.GA41732@localhost

Merge v5.10-rc3 into drm-next

We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/omap: Fix runtime PM imbalance on error

pm_runtime_get_sync() increments the runtime PM usage counter
even when it returns an error code. However, users of its
direct wrappers in omapdrm assume that PM usage counter will
not change on error. Thus a pairing decrement is needed on
the error handling path for these wrappers to keep the counter
balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200822065743.13671-1-dinghao.liu@zju.edu.cn

drm: omapdrm: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713122859.34135-1-grandmaster@al2klimov.de

drm/tidss: use devm_platform_ioremap_resource_byname

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.

Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917062958.2183496-1-wangxiaojun11@huawei.com

drm/omap: dsi: Rework and remove a few unused variables

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘_dsi_print_reset_status’:
 drivers/gpu/drm/omapdrm/dss/dsi.c:1131:6: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
 drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘dsi_update’:
 drivers/gpu/drm/omapdrm/dss/dsi.c:3943:10: warning: variable ‘dh’ set but not used [-Wunused-but-set-variable]
 drivers/gpu/drm/omapdrm/dss/dsi.c:3943:6: warning: variable ‘dw’ set but not used [-Wunused-but-set-variable]

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-9-lee.jones@linaro.org

drm/omap: omap_irq: Fix a couple of doc-rot issues

The API has been updated, but the header was not.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Function parameter or member 'crtc' not described in 'omap_irq_enable_vblank'
 drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'dev' description in 'omap_irq_enable_vblank'
 drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'pipe' description in 'omap_irq_enable_vblank'
 drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Function parameter or member 'crtc' not described in 'omap_irq_disable_vblank'
 drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'dev' description in 'omap_irq_disable_vblank'
 drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'pipe' description in 'omap_irq_disable_vblank'

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-5-lee.jones@linaro.org

drm/omap: dmm_tiler: Demote abusive use of kernel-doc format

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'dmm' not described in 'dmm_txn_init'
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'tcm' not described in 'dmm_txn_init'
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'txn' not described in 'dmm_txn_append'
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'area' not described in 'dmm_txn_append'
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'pages' not described in 'dmm_txn_append'
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'npages' not described in 'dmm_txn_append'
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'roll' not described in 'dmm_txn_append'
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'txn' not described in 'dmm_txn_commit'
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'wait' not described in 'dmm_txn_commit'

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob@ti.com>
Cc: Andy Gross <andy.gross@ti.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-10-lee.jones@linaro.org

drm/omap: gem: Fix misnamed and missing parameter descriptions

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Function parameter or member 'file' not described in 'omap_gem_dumb_create'
 drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Excess function parameter 'drm_file' description in 'omap_gem_dumb_create'
 drivers/gpu/drm/omapdrm/omap_gem.c:619: warning: Function parameter or member 'offset' not described in 'omap_gem_dumb_map_offset'

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-9-lee.jones@linaro.org

drm: Use state helper instead of CRTC state pointer

Many drivers reference the crtc->pointer in order to get the current CRTC
state in their atomic_begin or atomic_flush hooks, which would be the new
CRTC state in the global atomic state since _swap_state happened when those
hooks are run.

Use the drm_atomic_get_new_crtc_state helper to get that state to make it
more obvious.

This was made using the coccinelle script below:

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_begin = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_flush = func,
...,
};
)

@@
identifier crtc_atomic_func.func;
identifier crtc, state;
symbol crtc_state;
expression e;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  ...
- struct tegra_dc_state *crtc_state = e;
+ struct tegra_dc_state *dc_state = e;
  <+...
-       crtc_state
+ dc_state
  ...+>
  }

@@
identifier crtc_atomic_func.func;
identifier crtc, state;
symbol crtc_state;
expression e;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  ...
- struct mtk_crtc_state *crtc_state = e;
+ struct mtk_crtc_state *mtk_crtc_state = e;
  <+...
-       crtc_state
+ mtk_crtc_state
  ...+>
  }

@ replaces_new_state @
identifier crtc_atomic_func.func;
identifier crtc, state, crtc_state;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  ...
- struct drm_crtc_state *crtc_state = crtc->state;
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
  ...
 }

@@
identifier crtc_atomic_func.func;
identifier crtc, state, crtc_state;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
  ...
- crtc->state
+ crtc_state
  ...
 }

@ adds_new_state @
identifier crtc_atomic_func.func;
identifier crtc, state;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
  ...
- crtc->state
+ crtc_state
  ...
 }

@ include depends on adds_new_state || replaces_new_state @
@@

 #include <drm/drm_atomic.h>

@ no_include depends on !include && (adds_new_state || replaces_new_state) @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105164518.392891-1-maxime@cerno.tech

drm/mediatek: Use struct dma_buf_map in GEM vmap ops

Fixes a build failure with mediatek.

This change was supposed to be part of commit 49a3f51dfeee ("drm/gem:
Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but
mediatek was forgotten.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arunpravin <apaneers@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Madhav Chauhan <madhav.chauhan@amd.com>
Cc: Nirmoy Das <Nirmoy.Das@amd.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201109103242.19544-3-tzimmermann@suse.de

drm/msm: Use struct dma_buf_map in GEM vmap ops

Fixes a build failure with msm.

This change was supposed to be part of commit 49a3f51dfeee ("drm/gem:
Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but
msm was forgotten.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arunpravin <apaneers@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Madhav Chauhan <madhav.chauhan@amd.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Qinglang Miao <miaoqinglang@huawei.com>
Cc: dri-devel@lists.freedesktop.org
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201109103242.19544-2-tzimmermann@suse.de

drm/fb_helper: Use min_t() to handle size_t and unsigned long

On arm32:

    drivers/gpu/drm/drm_fb_helper.c: In function ‘fb_read_screen_base’:
    include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
    ...
    drivers/gpu/drm/drm_fb_helper.c:2041:22: note: in expansion of macro ‘min’
     2041 |  size_t alloc_size = min(count, PAGE_SIZE);
  |                      ^~~
    drivers/gpu/drm/drm_fb_helper.c: In function ‘fb_write_screen_base’:
    include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
    ...
    drivers/gpu/drm/drm_fb_helper.c:2115:22: note: in expansion of macro ‘min’
     2115 |  size_t alloc_size = min(count, PAGE_SIZE);
  |                      ^~~

Indeed, on 32-bit size_t is "unsigned int", not "unsigned long".

Fixes: 222ec45f4c69dfa8 ("drm/fb_helper: Support framebuffers in I/O memory")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110090119.2667326-1-geert+renesas@glider.be

drm/ast: Create chip AST2600

[New] Support AST2600

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109093812.161483-1-kuohsiang_chou@aspeedtech.com

Merge tag 'amd-drm-next-5.11-2020-11-05' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-next-5.11-2020-11-05:

amdgpu:
- Add initial support for Vangogh
- Add support for Green Sardine
- Add initial support for Dimgrey Cavefish
- Scatter/Gather display support for Renoir
- Updates for Sienna Cichlid
- Updates for Navy Flounder
- SMU7 power improvements
- Modifier support for gfx9+
- CI BACO fixes
- Arcturus SMU fixes
- Lots of code cleanups
- DC fixes
- Kernel doc fixes
- Add more GPU HW client information to page fault error logging
- MPO clock tuning for RV
- FP fixes for DCN3 on ARM and PPC

radeon:
- Expose voltage via hwmon on Sumo APUs

amdkfd:
- Fix unique id handling
- Misc fixes

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105222749.201798-1-alexander.deucher@amd.com

drm/gma500: Remove unused function psb_gem_get_aperture()

Apparently, the function was never used at all.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106124224.21201-1-tzimmermann@suse.de

drm/cma-helper: Make default object functions the default

As GEM object functions are now mandatory, DRM drivers based on CMA
helpers either set them in their implementation of gem_create_object,
or use the default via drm_gem_cma_create_object_default_funcs().

Simplify this by setting the default CMA object functions for all
objects that don't have any functions of their own. Follows the pattern
of similar code in SHMEM and VRAM helpers. The function
drm_gem_cma_create_object_default_funcs() is redundant and therefore
being removed.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106131632.6796-1-tzimmermann@suse.de

drm/fb_helper: Support framebuffers in I/O memory

At least sparc64 requires I/O-specific access to framebuffers. This
patch updates the fbdev console accordingly.

For drivers with direct access to the framebuffer memory, the callback
functions in struct fb_ops test for the type of memory and call the rsp
fb_sys_ of fb_cfb_ functions. Read and write operations are implemented
internally by DRM's fbdev helper.

For drivers that employ a shadow buffer, fbdev's blit function retrieves
the framebuffer address as struct dma_buf_map, and uses dma_buf_map
interfaces to access the buffer.

The bochs driver on sparc64 uses a workaround to flag the framebuffer as
I/O memory and avoid a HW exception. With the introduction of struct
dma_buf_map, this is not required any longer. The patch removes the rsp
code from both, bochs and fbdev.

v7:
* use min_t(size_t,) (kernel test robot)
* return the number of bytes read/written, if any (fbdev testcase)
v5:
* implement fb_read/fb_write internally (Daniel, Sam)
v4:
* move dma_buf_map changes into separate patch (Daniel)
* TODO list: comment on fbdev updates (Daniel)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-11-tzimmermann@suse.de

dma-buf-map: Add memcpy and pointer-increment interfaces

To do framebuffer updates, one needs memcpy from system memory and a
pointer-increment function. Add both interfaces with documentation.

v5:
* include <linux/string.h> to build on sparc64 (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-10-tzimmermann@suse.de

drm/gem: Store client buffer mappings as struct dma_buf_map

Kernel DRM clients now store their framebuffer address in an instance
of struct dma_buf_map. Depending on the buffer's location, the address
refers to system or I/O memory.

Callers of drm_client_buffer_vmap() receive a copy of the value in
the call's supplied arguments. It can be accessed and modified with
dma_buf_map interfaces.

v6:
* don't call page_to_phys() on framebuffers in I/O memory;
  warn instead (Daniel)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-9-tzimmermann@suse.de

drm/gem: Update internal GEM vmap/vunmap interfaces to use struct dma_buf_map

GEM's vmap and vunmap interfaces now wrap memory pointers in struct
dma_buf_map.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-8-tzimmermann@suse.de

drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends

This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.

TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.

v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de

drm/ttm: Add vmap/vunmap to TTM and TTM GEM helpers

The new functions ttm_bo_{vmap,vunmap}() map and unmap a TTM BO in kernel
address space. The mapping's address is returned as struct dma_buf_map.
Each function is a simplified version of TTM's existing kmap code. Both
functions respect the memory's location ani/or writecombine flags.

On top TTM's functions, GEM TTM helpers got drm_gem_ttm_{vmap,vunmap}(),
two helpers that convert a GEM object into the TTM BO and forward the call
to TTM's vmap/vunmap. These helpers can be dropped into the rsp GEM object
callbacks.

v5:
* use size_t for storing mapping size (Christian)
* ignore premapped memory areas correctly in ttm_bo_vunmap()
* rebase onto latest TTM interfaces (Christian)
* remove BUG() from ttm_bo_vmap() (Christian)
v4:
* drop ttm_kmap_obj_to_dma_buf() in favor of vmap helpers (Daniel,
  Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-6-tzimmermann@suse.de

drm/exynos: Remove empty exynos_drm_gem_prime_{vmap,vunmap}()

The functions exynos_drm_gem_prime_{vmap,vunmap}() are empty. Remove
them before changing the interface to use struct drm_buf_map. As a side
effect of removing drm_gem_prime_vmap(), the error code changes from
ENOMEM to EOPNOTSUPP.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-5-tzimmermann@suse.de

drm/etnaviv: Remove empty etnaviv_gem_prime_vunmap()

The function etnaviv_gem_prime_vunmap() is empty. Remove it before
changing the interface to use struct drm_buf_map.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-4-tzimmermann@suse.de

drm/cma-helper: Remove empty drm_gem_cma_prime_vunmap()

The function drm_gem_cma_prime_vunmap() is empty. Remove it before
changing the interface to use struct drm_buf_map.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-3-tzimmermann@suse.de

drm/vram-helper: Remove invariant parameters from internal kmap function

The parameters map and is_iomem are always of the same value. Removed them
to prepares the function for conversion to struct dma_buf_map.

v4:
* don't check for !kmap->virtual; will always be false

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-2-tzimmermann@suse.de

drm/udl: Retrieve USB device from struct drm_device.dev

Drop the driver's udev field in favor of struct drm_device.dev. No
functional changes made.

v3:
* upcast dev with udl_to_usb_device()
v2:
* upcast dev with drm_dev_get_usb_device()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103113456.3066-3-tzimmermann@suse.de

drm/tiny/gm12u320: Retrieve USB device from struct drm_device.dev

Drop the driver's udev field in favor of struct drm_device.dev. No
functional changes made.

v3:
* upcast dev with gm12u320_to_usb_device()
v2:
* upcast dev with drm_dev_get_usb_device()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103113456.3066-2-tzimmermann@suse.de

drm/ast: Fixed 1920x1080 sync. polarity issue

[Bug] Change the vertical synchroous polary of 1920x1080 @60Hz
      from  Negtive to Positive

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105094729.106059-1-kuohsiang_chou@aspeedtech.com

video: fbdev: riva: remove some unused varibles

Couple of variables are actually useless, remove them to save some gcc
warning:
drivers/video/fbdev/riva/riva_hw.c:250:21: warning: variable ‘mlwm’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:15: warning: variable ‘vraw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:9: warning: variable ‘craw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:73: warning: variable ‘align’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:50: warning: variable
‘color_key_enable’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1604822519-65607-1-git-send-email-alex.shi@linux.alibaba.com

drm/panel: simple: Add flags to boe_nv133fhm_n61

Reading the EDID of this panel shows that these flags should be set. Set
them so that we match what is in the EDID.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106182333.3080124-1-swboyd@chromium.org

Linux 5.10-rc3

Merge tag 'driver-core-5.10-rc3' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core documentation fixes from Greg KH:
 "Some small Documentation fixes that were fallout from the larger
  documentation update we did in 5.10-rc2.

  Nothing major here at all, but all of these have been in linux-next
  and resolve build warnings when building the documentation files"

* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: remove mic/index from misc-devices/index.rst
  scripts: get_api.pl: Add sub-titles to ABI output
  scripts: get_abi.pl: Don't let ABI files to create subtitles
  docs: leds: index.rst: add a missing file
  docs: ABI: sysfs-class-net: fix a typo
  docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys

Merge tag 'tty-5.10-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are a small number of small tty and serial fixes for some
  reported problems for the tty core, vt code, and some serial drivers.

  They include fixes for:

   - a buggy and obsolete vt font ioctl removal

   - 8250_mtk serial baudrate runtime warnings

   - imx serial earlycon build configuration fix

   - txx9 serial driver error path cleanup issues

   - tty core fix in release_tty that can be triggered by trying to bind
     an invalid serial port name to a speakup console device

  Almost all of these have been in linux-next without any problems, the
  only one that hasn't, just deletes code :)"

* tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Disable KD_FONT_OP_COPY
  tty: fix crash in release_tty if tty->port is not set
  serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init
  tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled
  serial: 8250_mtk: Fix uart_get_baud_rate warning

Merge tag 'usb-5.10-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and new device ids:

   - USB gadget fixes for some reported issues

   - Fixes for the ever-troublesome apple fastcharge driver, hopefully
     we finally have it right.

   - More USB core quirks for odd devices

   - USB serial driver fixes for some long-standing issues that were
     recently found

   - some new USB serial driver device ids

  All have been in linux-next with no reported issues"

* tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property
  usb: mtu3: fix panic in mtu3_gadget_stop()
  USB: serial: option: add Telit FN980 composition 0x1055
  USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
  USB: serial: cyberjack: fix write-URB completion race
  USB: Add NO_LPM quirk for Kingston flash drive
  USB: serial: option: add Quectel EC200T module support
  usb: raw-gadget: fix memory leak in gadget_setup
  usb: dwc2: Avoid leaving the error_debugfs label unused
  usb: dwc3: ep0: Fix delay status handling
  usb: gadget: fsl: fix null pointer checking
  usb: gadget: goku_udc: fix potential crashes in probe
  usb: dwc3: pci: add support for the Intel Alder Lake-S

fork: fix copy_process(CLONE_PARENT) race with the exiting ->real_parent

current->group_leader->exit_signal may change during copy_process() if
current->real_parent exits.

Move the assignment inside tasklist_lock to avoid the race.

Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vt: Disable KD_FONT_OP_COPY

It's buggy:

On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ).  The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use  KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.

Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
  and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
  not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016

Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken

https://github.com/systemd/systemd/pull/3651

So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.

Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.

Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:

/* copy font from active VT, where the font was uploaded to */
cfo.op = KD_FONT_OP_COPY;
cfo.height = vcs.v_active-1; /* tty1 == index 0 */
(void) ioctl(vcfd, KDFONTOP, &cfo);

Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.

v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.

Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'xfs-5.10-fixes-3' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:

 - Fix an uninitialized struct problem

 - Fix an iomap problem zeroing unwritten EOF blocks

 - Fix some clumsy error handling when writeback fails on filesystems
   with blocksize < pagesize

 - Fix a retry loop not resetting loop variables properly

 - Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
   actually does permit that combination

 - Fix excessive page cache flushing when unsharing part of a file

* tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: only flush the unshared range in xfs_reflink_unshare
  xfs: fix scrub flagging rtinherit even if there is no rt device
  xfs: fix missing CoW blocks writeback conversion retry
  iomap: clean up writeback state logic on writepage error
  iomap: support partial page discard on writeback block mapping failure
  xfs: flush new eof page on truncate to avoid post-eof corruption
  xfs: set xefi_discard when creating a deferred agfl free log intent item

Merge branch 'hch' (patches from Christoph)

Merge procfs splice read fixes from Christoph Hellwig:
 "Greg reported a problem due to the fact that Android tests use procfs
  files to test splice, which stopped working with the changes for
  set_fs() removal.

  This series adds read_iter support for seq_file, and uses those for
  various proc files using seq_file to restore splice read support"

[ Side note: Christoph initially had a scripted "move everything over"
  patch, which looks fine, but I personally would prefer us to actively
  discourage splice() on random files.  So this does just the minimal
  basic core set of proc file op conversions.

  For completeness, and in case people care, that script was

     sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g'

  but I'll wait and see if somebody has a strong argument for using
  splice on random small /proc files before I'd run it on the whole
  kernel.   - Linus ]

* emailed patches from Christoph Hellwig <hch@lst.de>:
  proc "seq files": switch to ->read_iter
  proc "single files": switch to ->read_iter
  proc/stat: switch to ->read_iter
  proc/cpuinfo: switch to ->read_iter
  proc: wire up generic_file_splice_read for iter ops
  seq_file: add seq_read_iter

Merge tag 'x86-urgent-2020-11-08' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a
     combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs
     integrated assembler upset

   - Correct the mitigation selection logic which prevented the related
     prctl to work correctly

   - Make the UV5 hubless system work correctly by fixing up the
     malformed table entries and adding the missing ones"

* tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Recognize UV5 hubless system identifier
  x86/platform/uv: Remove spaces from OEM IDs
  x86/platform/uv: Fix missing OEM_TABLE_ID
  x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP
  x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S

Merge tag 'perf-urgent-2020-11-08' of git://git./linux/kernel/git/tip/tip

Pull perf fix from Thomas Gleixner:
 "A single fix for the perf core plugging a memory leak in the address
  filter parser"

* tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix a memory leak in perf_event_parse_addr_filter()

drm: remove unneeded break

A break is not needed if it is preceded by a return or break

Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201019163115.25814-1-trix@redhat.com

Merge tag 'locking-urgent-2020-11-08' of git://git./linux/kernel/git/tip/tip

Pull futex fix from Thomas Gleixner:
 "A single fix for the futex code where an intermediate state in the
  underlying RT mutex was not handled correctly and triggering a BUG()
  instead of treating it as another variant of retry condition"

* tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle transient "ownerless" rtmutex state correctly

Merge tag 'irq-urgent-2020-11-08' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Fix the fallout of the IPI as interrupt conversion in Kconfig and
     the BCM2836 interrupt chip driver

   - Fixes for interrupt affinity setting and the handling of
     hierarchical irq domains in the SiFive PLIC driver

   - Make the unmapped event handling in the TI SCI driver work
     correctly

   - A few minor fixes and cleanups in various chip drivers and Kconfig"

* tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events
  irqchip/ti-sci-inta: Add support for unmapped event handling
  dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling
  irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm
  irqchip/sifive-plic: Fix chip_data access within a hierarchy
  irqchip/sifive-plic: Fix broken irq_set_affinity() callback
  irqchip/stm32-exti: Add all LP timer exti direct events support
  irqchip/bcm2836: Fix missing __init annotation
  irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY
  irqchip/mst: Make mst_intc_of_init static
  irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7
  genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY

Merge tag 'core-urgent-2020-11-08' of git://git./linux/kernel/git/tip/tip

Pull entry code fix from Thomas Gleixner:
 "A single fix for the generic entry code to correct the wrong
  assumption that the lockdep interrupt state needs not to be
  established before calling the RCU check"

* tag 'core-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Fix the incorrect ordering of lockdep and RCU check

Merge tag 'powerpc-5.10-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user()

 - fix for an RCU splat at boot caused by a recent lockdep change

 - fix for a possible deadlock in our EEH debugfs code

 - several fixes for handling of _PAGE_ACCESSED on 32-bit platforms

 - build fix when CONFIG_NUMA=n

Thanks to Andreas Schwab, Christophe Leroy, Oliver O'Halloran, Qian Cai,
and Scott Cheloha.

* tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/numa: Fix build when CONFIG_NUMA=n
  powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry
  powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
  powerpc/40x: Always fault when _PAGE_ACCESSED is not set
  powerpc/603: Always fault when _PAGE_ACCESSED is not set
  powerpc: Use asm_goto_volatile for put_user()
  powerpc/smp: Call rcu_cpu_starting() earlier
  powerpc/eeh_cache: Fix a possible debugfs deadlock

drm/bridge: lvds-codec: Use dev_err_probe for error handling

dev_err_probe function simplifies error handling. So use the same in probe
function wherever possible.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020093655.3584-1-biju.das.jz@bp.renesas.com

drm/panel: panel-simple: Add connector_type for EDT ETM0700G0DH6 panel

Fix the warning message "missing connector type" by adding connector_type
for EDT ETM0700G0DH6 panel.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020094910.4756-1-biju.das.jz@bp.renesas.com

drm/bridge: sii902x: Enable I/O and core VCC supplies if present

On the SII9022, the IOVCC and CVCC12 supplies must reach the correct
voltage before the reset sequence is initiated. On most boards, this
assumption is true at boot-up, so initialization succeeds.

However, when we try to initialize the chip with incorrect supply
voltages, it will not respond to I2C requests. sii902x_probe() fails
with -ENXIO.

To resolve this, look for the "iovcc" and "cvcc12" regulators, and
make sure they are enabled before starting the reset sequence. If
these supplies are not available in devicetree, then they will default
to dummy-regulator. In that case everything will work like before.

This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode.
On this board, the supplies would be set by the second stage
bootloader, which does not run in falcon mode.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[Fix checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-2-mr.nuke.me@gmail.com

dt-bindings: display: sii902x: Add supply bindings

The sii902x chip family requires IO and core voltages to reach the
correct voltage before chip initialization. Add binding for describing
the two supplies.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-3-mr.nuke.me@gmail.com

drm/bridge: sii902x: Refactor init code into separate function

Separate the hardware initialization code from setting up the data
structures and parsing the device tree. The purpose of this change is
to provide a single exit point and avoid a waterfall of 'goto's in
the subsequent patch.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-1-mr.nuke.me@gmail.com

drm: panel: simple: add missing platform_driver_unregister() in panel_simple_init

Add the missing platform_driver_unregister() before return
from panel_simple_init in the error handling case when failed
to register panel_simple_dsi_driver with CONFIG_DRM_MIPI_DSI
enabled.

Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201031011856.137307-1-miaoqinglang@huawei.com

drm/encoder: remove obsolete documentation of bridge

In commit 05193dc38197 ("drm/bridge: Make the bridge chain a
double-linked list") the bridge has been removed and replaced by a
private field. Remove the leftover documentation of the removed field.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911135413.3654800-2-m.tretter@pengutronix.de

Merge tag 'block-5.10-2020-11-07' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
    - revert a nvme_queue size optimization (Keith Bush)
    - fabrics timeout races fixes (Chao Leng and Sagi Grimberg)"

 - null_blk zone locking fix (Damien)

* tag 'block-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
  null_blk: Fix scheduling in atomic with zoned mode
  nvme-tcp: avoid repeated request completion
  nvme-rdma: avoid repeated request completion
  nvme-tcp: avoid race between time out and tear down
  nvme-rdma: avoid race between time out and tear down
  nvme: introduce nvme_sync_io_queues
  Revert "nvme-pci: remove last_sq_tail"

Merge tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "A set of fixes for io_uring:

   - SQPOLL cancelation fixes

   - Two fixes for the io_identity COW

   - Cancelation overflow fix (Pavel)

   - Drain request cancelation fix (Pavel)

   - Link timeout race fix (Pavel)"

* tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
  io_uring: fix link lookup racing with link timeout
  io_uring: use correct pointer for io_uring_show_cred()
  io_uring: don't forget to task-cancel drained reqs
  io_uring: fix overflowed cancel w/ linked ->files
  io_uring: drop req/tctx io_identity separately
  io_uring: ensure consistent view of original task ->mm from SQPOLL
  io_uring: properly handle SQPOLL request cancelations
  io-wq: cancel request if it's asking for files and we don't have them

futex: Handle transient "ownerless" rtmutex state correctly

Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner().
This is one possible chain of events leading to this:

Task Prio       Operation
T1   120 lock(F)
T2   120 lock(F)   -> blocks (top waiter)
T3   50 (RT) lock(F)   -> boosts T1 and blocks (new top waiter)
XX    timeout/  -> wakes T2
signal
T1   50 unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set)
T2   120 cleanup   -> try_to_take_mutex() fails because T3 is the top waiter
           and the lower priority T2 cannot steal the lock.
        -> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON()

The comment states that this is invalid and rt_mutex_real_owner() must
return a non NULL owner when the trylock failed, but in case of a queued
and woken up waiter rt_mutex_real_owner() == NULL is a valid transient
state. The higher priority waiter has simply not yet managed to take over
the rtmutex.

The BUG_ON() is therefore wrong and this is just another retry condition in
fixup_pi_state_owner().

Drop the locks, so that T3 can make progress, and then try the fixup again.

Gratian provided a great analysis, traces and a reproducer. The analysis is
to the point, but it confused the hell out of that tglx dude who had to
page in all the futex horrors again. Condensed version is above.

[ tglx: Wrote comment and changelog ]

Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com
Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Driver bugfixes for I2C.

  Most of them are for the new mlxbf driver which got more exposure
  after rc1. The sh_mobile patch should already have reached you during
  the merge window, but I accidently dropped it. However, since it fixes
  a problem with rebooting, it is still fine for rc3"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED
  i2c: designware: call i2c_dw_read_clear_intrbits_slave() once
  i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM
  i2c: mlxbf: Update author and maintainer email info
  i2c: mlxbf: Update reference clock frequency
  i2c: mlxbf: Remove unecessary wrapper functions
  i2c: mlxbf: Fix resrticted cast warning of sparse
  i2c: mlxbf: Add CONFIG_ACPI to guard ACPI function call
  i2c: sh_mobile: implement atomic transfers
  i2c: mediatek: move dma reset before i2c reset

Merge tag 'riscv-for-linus-5.10-rc3' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - SPDX comment style fix

 - ignore memory that is unusable

 - avoid setting a kernel text offset for the !MMU kernels, where
   skipping the first page of memory is both unnecessary and costly

 - avoid passing the flag bits in satp to pfn_to_virt()

 - fix __put_kernel_nofault, where we had the arguments to
   __put_user_nocheck reversed

 - workaround for a bug in the FU540 to avoid triggering PMP issues
   during early boot

 - change to how we pull symbols out of the vDSO. The old mechanism was
   removed from binutils-2.35 (and has been backported to Debian's 2.34)

* tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix the VDSO symbol generaton for binutils-2.35+
  RISC-V: Use non-PGD mappings for early DTB access
  riscv: uaccess: fix __put_kernel_nofault()
  riscv: fix pfn_to_virt err in do_page_fault().
  riscv: Set text_offset correctly for M-Mode
  RISC-V: Remove any memblock representing unusable memory area
  risc-v: kernel: ftrace: Fixes improper SPDX comment style

Merge tag 'usb-serial-5.10-rc3' of https://git./linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.10-rc3

Here's a fix for a long-standing issue with the cyberjack driver and
some new device ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit FN980 composition 0x1055
  USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
  USB: serial: cyberjack: fix write-URB completion race
  USB: serial: option: add Quectel EC200T module support

perf/core: Fix a memory leak in perf_event_parse_addr_filter()

As shown through runtime testing, the "filename" allocation is not
always freed in perf_event_parse_addr_filter().

There are three possible ways that this could happen:

 - It could be allocated twice on subsequent iterations through the loop,
 - or leaked on the success path,
 - or on the failure path.

Clean up the code flow to make it obvious that 'filename' is always
freed in the reallocation path and in the two return paths as well.

We rely on the fact that kfree(NULL) is NOP and filename is initialized
with NULL.

This fixes the leak. No other side effects expected.

[ Dan Carpenter: cleaned up the code flow & added a changelog. ]
[ Ingo Molnar: updated the changelog some more. ]

Fixes: 375637bc5249 ("perf/core: Introduce address range filtering")
Signed-off-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
--
 kernel/events/core.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

drm/bridge: ti-sn65dsi86: Update reply on aux failures

We should be setting the drm_dp_aux_msg::reply field if a NACK or a
SHORT reply happens. Update the error bit handling logic in
ti_sn_aux_transfer() to handle these cases and notify upper layers that
such errors have happened. This helps the retry logic understand that a
timeout has happened, or to shorten the read length if the panel isn't
able to handle the longest read possible.

Note: I don't have any hardware that exhibits these code paths so this
is written based on reading the datasheet for this bridge and inspecting
the code and how this is called.

Changes in v2:
 - Move WRITE_STATUS_UPDATE check from case to assignment

Changes in v2:
 - Handle WRITE_STATUS_UPDATE properly

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102181144.3469197-5-swboyd@chromium.org

drm/bridge: ti-sn65dsi86: Read EDID blob over DDC

Use the DDC connection to read the EDID from the eDP panel instead of
relying on the panel to tell us the modes.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102181144.3469197-4-swboyd@chromium.org

drm/bridge: ti-sn65dsi86: Make polling a busy loop

There's no reason we need to wait here to poll a register over i2c. The
i2c bus is inherently slow and delays are practically part of the
protocol because we have to wait for the device to respond to any
request for a register. Let's rely on the sleeping of the i2c controller
instead of adding any sort of delay here in the bridge driver.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102181144.3469197-3-swboyd@chromium.org

drm/bridge: ti-sn65dsi86: Combine register accesses in ti_sn_aux_transfer()

These register reads and writes are sometimes directly next to each
other in the register address space. Let's use regmap bulk read/write
APIs to get the data with one transfer instead of multiple i2c
transfers. This helps cut down on the number of transfers in the case of
something like reading an EDID where we read in blocks of 16 bytes at a
time and the last for loop here is sending an i2c transfer for each of
those 16 bytes, one at a time. Ouch!

Changes in v3:
 - Undid changes in v2

Changes in v2:
 - Combined AUX_CMD register write

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102181144.3469197-2-swboyd@chromium.org

drm: bridge: add support for lontium LT9611UXC bridge

Add support for Lontium LT9611UXC HDMI bridge. Lontium LT9611UXC is a
DSI to HDMI bridge which supports two DSI ports and I2S port as an input
and HDMI port as output. Despite name being similar to LT9611, these
devices are different enough to warrant separate driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102011435.1100930-3-dmitry.baryshkov@linaro.org

dt-bindings: display: bridge: Add documentation for LT9611UXC

Lontium LT9611UXC is a DSI to HDMI bridge which supports 2 DSI ports
and I2S port as input and one HDMI port as output. The LT9611UXC chip is
handled by a separate driver, but the bindings used are fully compatible
with the LT9611 chip, so let's reuse the lt9611.yaml schema.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102011435.1100930-2-dmitry.baryshkov@linaro.org

x86/platform/uv: Recognize UV5 hubless system identifier

Testing shows a problem in that UV5 hubless systems were not being
recognized.  Add them to the list of OEM IDs checked.

Fixes: 6c7794423a998 ("Add UV5 direct references")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-4-mike.travis@hpe.com

x86/platform/uv: Remove spaces from OEM IDs

Testing shows that trailing spaces caused problems with the OEM_ID and
the OEM_TABLE_ID.  One being that the OEM_ID would not string compare
correctly.  Another the OEM_ID and OEM_TABLE_ID would be concatenated
in the printout.  Remove any trailing spaces.

Fixes: 1e61f5a95f191 ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-3-mike.travis@hpe.com