Chen-Yu Tsai [Tue, 7 Jan 2020 07:01:13 +0000 (15:01 +0800)]
drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
commit
4396393fb96449c56423fb4b351f76e45a6bcaf6 upstream.
In commit
0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.
However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.
Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.
This fixes the scrolling artifacts seen on my A13 tablet.
Fixes:
0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 13 Dec 2019 22:06:58 +0000 (14:06 -0800)]
Input: input_event - fix struct padding on sparc64
commit
f729a1b0f8df7091cea3729fc0e414f5326e1163 upstream.
Going through all uses of timeval, I noticed that we screwed up
input_event in the previous attempts to fix it:
The time fields now match between kernel and user space, but all following
fields are in the wrong place.
Add the required padding that is implied by the glibc timeval definition
to fix the layout, and use a struct initializer to avoid leaking kernel
stack data.
Fixes:
141e5dcaa735 ("Input: input_event - fix the CONFIG_SPARC64 mixup")
Fixes:
2e746942ebac ("Input: input_event - provide override for sparc64")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191213204936.3643476-2-arnd@arndb.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Torokhov [Fri, 13 Dec 2019 22:56:16 +0000 (14:56 -0800)]
Input: add safety guards to input_set_keycode()
commit
cb222aed03d798fc074be55e59d9a112338ee784 upstream.
If we happen to have a garbage in input device's keycode table with values
too big we'll end up doing clear_bit() with offset way outside of our
bitmaps, damaging other objects within an input device or even outside of
it. Let's add sanity checks to the returned old keycodes.
Reported-by: syzbot+c769968809f9359b07aa@syzkaller.appspotmail.com
Reported-by: syzbot+76f3a30e88d256644c78@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20191207212757.GA245964@dtor-ws
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Torokhov [Sat, 7 Dec 2019 21:05:18 +0000 (13:05 -0800)]
HID: hid-input: clear unmapped usages
commit
4f3882177240a1f55e45a3d241d3121341bead78 upstream.
We should not be leaving half-mapped usages with potentially invalid
keycodes, as that may confuse hidinput_find_key() when the key is located
by index, which may end up feeding way too large keycode into the VT
keyboard handler and cause OOB write there:
BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr
ffffffff89a1b2d8 by task syz-executor108/1722
...
kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
input_pass_values drivers/input/input.c:949 [inline]
input_set_keycode+0x290/0x320 drivers/input/input.c:954
evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
evdev_do_ioctl drivers/input/evdev.c:1150 [inline]
Cc: stable@vger.kernel.org
Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcel Holtmann [Wed, 4 Dec 2019 02:43:55 +0000 (03:43 +0100)]
HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
commit
be54e7461ffdc5809b67d2aeefc1ddc9a91470c7 upstream.
Always return EPOLLOUT from uhid_char_poll to allow polling /dev/uhid
for writable state.
Fixes:
1f9dec1e0164 ("HID: uhid: allow poll()'ing on uhid devices")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Tue, 10 Dec 2019 21:26:11 +0000 (16:26 -0500)]
HID: Fix slab-out-of-bounds read in hid_field_extract
commit
8ec321e96e056de84022c032ffea253431a83c3c upstream.
The syzbot fuzzer found a slab-out-of-bounds bug in the HID report
handler. The bug was caused by a report descriptor which included a
field with size 12 bits and count 4899, for a total size of 7349
bytes.
The usbhid driver uses at most a single-page 4-KB buffer for reports.
In the test there wasn't any problem about overflowing the buffer,
since only one byte was received from the device. Rather, the bug
occurred when the HID core tried to extract the data from the report
fields, which caused it to try reading data beyond the end of the
allocated buffer.
This patch fixes the problem by rejecting any report whose total
length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow
for a possible report index). In theory a device could have a report
longer than that, but if there was such a thing we wouldn't handle it
correctly anyway.
Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Fernandes (Google) [Thu, 2 Jan 2020 19:46:25 +0000 (14:46 -0500)]
tracing: Change offset type to s32 in preempt/irq tracepoints
commit
bf44f488e168368cae4139b4b33c3d0aaa11679c upstream.
Discussion in the below link reported that symbols in modules can appear
to be before _stext on ARM architecture, causing wrapping with the
offsets of this tracepoint. Change the offset type to s32 to fix this.
Link: http://lore.kernel.org/r/20191127154428.191095-1-antonio.borneo@st.com
Link: http://lkml.kernel.org/r/20200102194625.226436-1-joel@joelfernandes.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Antonio Borneo <antonio.borneo@st.com>
Cc: stable@vger.kernel.org
Fixes:
d59158162e032 ("tracing: Add support for preempt and irq enable/disable events")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Fri, 3 Jan 2020 03:02:41 +0000 (22:02 -0500)]
tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
commit
b8299d362d0837ae39e87e9019ebe6b736e0f035 upstream.
On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and
this makes the stack tracer fail to compile. Just define it to zero in this
case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Cc: stable@vger.kernel.org
Fixes:
4df297129f622 ("tracing: Remove most or all of stack tracer stack size from stack_max_size")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaitao Cheng [Tue, 31 Dec 2019 13:35:30 +0000 (05:35 -0800)]
kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
commit
50f9ad607ea891a9308e67b81f774c71736d1098 upstream.
In the function, if register_trace_sched_migrate_task() returns error,
sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is
why fail_deprobe_sched_switch was added.
Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com
Cc: stable@vger.kernel.org
Fixes:
478142c39c8c2 ("tracing: do not grab lock in wakeup latency function tracing")
Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Wed, 8 Jan 2020 08:47:56 +0000 (16:47 +0800)]
ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen
commit
54a6a7dc107da0492a9e84fd7e9a107b3c58138d upstream.
Add quirk to ALC285_FIXUP_SPEAKER2_TO_DAC1, which is the same fixup
applied for X1 Carbon 7th gen in commit
d2cd795c4ece ("ALSA: hda -
fixup for the bass speaker on Lenovo Carbon X1 7th gen").
Signed-off-by: Kailang Yang <kailang@realtek.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Tue, 7 Jan 2020 09:22:19 +0000 (17:22 +0800)]
ALSA: hda/realtek - Set EAPD control to default for ALC222
commit
9194a1ebbc56d7006835e2b4cacad301201fb832 upstream.
Set EAPD control to verb control.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Fri, 3 Jan 2020 08:24:06 +0000 (16:24 +0800)]
ALSA: hda/realtek - Add new codec supported for ALCS1200A
commit
6d9ffcff646bbd0ede6c2a59f4cd28414ecec6e0 upstream.
Add ALCS1200A supported.
It was similar as ALC900.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a9bd3cdaa02d4fa197623448d5c51e50@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Sat, 4 Jan 2020 11:09:36 +0000 (12:09 +0100)]
ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5
commit
51d4efab7865e6ea6a4ebcd25b3f03c019515c4c upstream.
Bose Companion 5 (with USB ID 05a7:1020) doesn't seem supporting
reading back the sample rate, so the existing quirk is needed.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206063
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200104110936.14288-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Thu, 26 Dec 2019 15:57:54 +0000 (07:57 -0800)]
usb: chipidea: host: Disable port power only if previously enabled
commit
c1ffba305dbcf3fb9ca969c20a97acbddc38f8e9 upstream.
On shutdown, ehci_power_off() is called unconditionally to power off
each port, even if it was never called to power on the port.
For chipidea, this results in a call to ehci_ci_portpower() with a request
to power off ports even if the port was never powered on.
This results in the following warning from the regulator code.
WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210
unbalanced disables for usb_otg2_vbus
Modules linked in:
CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1
Hardware name: Freescale i.MX7 Dual (Device Tree)
[<
c0313658>] (unwind_backtrace) from [<
c030d698>] (show_stack+0x10/0x14)
[<
c030d698>] (show_stack) from [<
c1133afc>] (dump_stack+0xe0/0x10c)
[<
c1133afc>] (dump_stack) from [<
c0349098>] (__warn+0xf4/0x10c)
[<
c0349098>] (__warn) from [<
c0349128>] (warn_slowpath_fmt+0x78/0xbc)
[<
c0349128>] (warn_slowpath_fmt) from [<
c09f36ac>] (_regulator_disable+0x1a8/0x210)
[<
c09f36ac>] (_regulator_disable) from [<
c09f374c>] (regulator_disable+0x38/0xe8)
[<
c09f374c>] (regulator_disable) from [<
c0df7bac>] (ehci_ci_portpower+0x38/0xdc)
[<
c0df7bac>] (ehci_ci_portpower) from [<
c0db4fa4>] (ehci_port_power+0x50/0xa4)
[<
c0db4fa4>] (ehci_port_power) from [<
c0db5420>] (ehci_silence_controller+0x5c/0xc4)
[<
c0db5420>] (ehci_silence_controller) from [<
c0db7644>] (ehci_stop+0x3c/0xcc)
[<
c0db7644>] (ehci_stop) from [<
c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c)
[<
c0d5bdc4>] (usb_remove_hcd) from [<
c0df7638>] (host_stop+0x38/0xa8)
[<
c0df7638>] (host_stop) from [<
c0df2f34>] (ci_hdrc_remove+0x44/0xe4)
...
Keeping track of the power enable state avoids the warning and traceback.
Fixes:
c8679a2fb8dec ("usb: chipidea: host: add portpower override")
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20191226155754.25451-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Sun, 15 Dec 2019 16:39:05 +0000 (16:39 +0000)]
i2c: fix bus recovery stop mode timing
commit
cf8ce8b80f8bf9669f6ec4e71e16668430febdac upstream.
The I2C specification states that tsu:sto for standard mode timing must
be at minimum 4us. Pictographically, this is:
SCL: ____/~~~~~~~~~
SDA: _________/~~~~
->| |<- 4us minimum
We are currently waiting 2.5us between asserting SCL and SDA, which is
in violation of the standard. Adjust the timings to ensure that we meet
what is stipulated as the minimum timings to ensure that all devices
correctly interpret the STOP bus transition.
This is more important than trying to generate a square wave with even
duty cycle.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 19 Dec 2019 12:02:03 +0000 (12:02 +0000)]
chardev: Avoid potential use-after-free in 'chrdev_open()'
commit
68faa679b8be1a74e6663c21c3a9d25d32f1c079 upstream.
'chrdev_open()' calls 'cdev_get()' to obtain a reference to the
'struct cdev *' stashed in the 'i_cdev' field of the target inode
structure. If the pointer is NULL, then it is initialised lazily by
looking up the kobject in the 'cdev_map' and so the whole procedure is
protected by the 'cdev_lock' spinlock to serialise initialisation of
the shared pointer.
Unfortunately, it is possible for the initialising thread to fail *after*
installing the new pointer, for example if the subsequent '->open()' call
on the file fails. In this case, 'cdev_put()' is called, the reference
count on the kobject is dropped and, if nobody else has taken a reference,
the release function is called which finally clears 'inode->i_cdev' from
'cdev_purge()' before potentially freeing the object. The problem here
is that a racing thread can happily take the 'cdev_lock' and see the
non-NULL pointer in the inode, which can result in a refcount increment
from zero and a warning:
| ------------[ cut here ]------------
| refcount_t: addition on 0; use-after-free.
| WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0
| Modules linked in:
| CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
| RIP: 0010:refcount_warn_saturate+0x6d/0xf0
| Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08
| RSP: 0018:
ffffb524c1b9bc70 EFLAGS:
00010282
| RAX:
0000000000000000 RBX:
ffff9e9da1f71390 RCX:
0000000000000000
| RDX:
ffff9e9dbbd27618 RSI:
ffff9e9dbbd18798 RDI:
ffff9e9dbbd18798
| RBP:
0000000000000000 R08:
000000000000095f R09:
0000000000000039
| R10:
0000000000000000 R11:
ffffb524c1b9bb20 R12:
ffff9e9da1e8c700
| R13:
ffffffffb25ee8b0 R14:
0000000000000000 R15:
ffff9e9da1e8c700
| FS:
00007f3b87d26700(0000) GS:
ffff9e9dbbd00000(0000) knlGS:
0000000000000000
| CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
| CR2:
00007fc16909c000 CR3:
000000012df9c000 CR4:
00000000000006e0
| DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
| DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
| Call Trace:
| kobject_get+0x5c/0x60
| cdev_get+0x2b/0x60
| chrdev_open+0x55/0x220
| ? cdev_put.part.3+0x20/0x20
| do_dentry_open+0x13a/0x390
| path_openat+0x2c8/0x1470
| do_filp_open+0x93/0x100
| ? selinux_file_ioctl+0x17f/0x220
| do_sys_open+0x186/0x220
| do_syscall_64+0x48/0x150
| entry_SYSCALL_64_after_hwframe+0x44/0xa9
| RIP: 0033:0x7f3b87efcd0e
| Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4
| RSP: 002b:
00007f3b87d259f0 EFLAGS:
00000293 ORIG_RAX:
0000000000000101
| RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f3b87efcd0e
| RDX:
0000000000000000 RSI:
00007f3b87d25a80 RDI:
00000000ffffff9c
| RBP:
00007f3b87d25e90 R08:
0000000000000000 R09:
0000000000000000
| R10:
0000000000000000 R11:
0000000000000293 R12:
00007ffe188f504e
| R13:
00007ffe188f504f R14:
00007f3b87d26700 R15:
0000000000000000
| ---[ end trace
24f53ca58db8180a ]---
Since 'cdev_get()' can already fail to obtain a reference, simply move
it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()',
which will cause the racing thread to return -ENXIO if the initialising
thread fails unexpectedly.
Cc: Hillf Danton <hdanton@sina.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: syzbot+82defefbbd8527e1c2cb@syzkaller.appspotmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191219120203.32691-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 12 Jan 2020 11:17:30 +0000 (12:17 +0100)]
Linux 4.19.95
Qi Zhou [Sat, 4 Jan 2020 11:02:01 +0000 (11:02 +0000)]
usb: missing parentheses in USE_NEW_SCHEME
commit
1530f6f5f5806b2abbf2a9276c0db313ae9a0e09 upstream.
According to
bd0e6c9614b9 ("usb: hub: try old enumeration scheme first
for high speed devices") the kernel will try the old enumeration scheme
first for high speed devices. This can happen when a high speed device
is plugged in.
But due to missing parentheses in the USE_NEW_SCHEME define, this logic
can get messed up and the incorrect result happens.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qi Zhou <atmgnd@outlook.com>
Link: https://lore.kernel.org/r/ht4mtag8ZP-HKEhD0KkJhcFnVlOFV8N8eNjJVRD9pDkkLUNhmEo8_cL_sl7xy9mdajdH-T8J3TFQsjvoYQT61NFjQXy469Ed_BbBw_x4S1E=@protonmail.com
[ fixup changelog text - gregkh]
Cc: stable <stable@vger.kernel.org>
Fixes:
bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Fri, 13 Dec 2019 13:56:15 +0000 (14:56 +0100)]
USB: serial: option: add Telit ME910G1 0x110a composition
commit
0d3010fa442429f8780976758719af05592ff19f upstream.
This patch adds the following Telit ME910G1 composition:
0x110a: tty, tty, tty, rmnet
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 19 Dec 2019 16:10:16 +0000 (17:10 +0100)]
USB: core: fix check for duplicate endpoints
commit
3e4f8e21c4f27bcf30a48486b9dcc269512b79ff upstream.
Amend the endpoint-descriptor sanity checks to detect all duplicate
endpoint addresses in a configuration.
Commit
0a8fd1346254 ("USB: fix problems with duplicate endpoint
addresses") added a check for duplicate endpoint addresses within a
single alternate setting, but did not look for duplicate addresses in
other interfaces.
The current check would also not detect all duplicate addresses when one
endpoint is as a (bi-directional) control endpoint.
This specifically avoids overwriting the endpoint entries in struct
usb_device when enabling a duplicate endpoint, something which could
potentially lead to crashes or leaks, for example, when endpoints are
later disabled.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191219161016.6695-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thinh Nguyen [Sat, 14 Dec 2019 02:40:45 +0000 (18:40 -0800)]
usb: dwc3: gadget: Fix request complete check
commit
ea0d762775e20aaff7909a3f0866ff1688b1c618 upstream.
We can only check for IN direction if the request had completed. For OUT
direction, it's perfectly fine that the host can send less than the
setup length. Let's return true fall all cases of OUT direction.
Fixes:
e0c42ce590fe ("usb: dwc3: gadget: simplify IOC handling")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Link: https://lore.kernel.org/r/ac5a3593a94fdaa3d92e6352356b5f7a01ccdc7c.1576291140.git.thinhn@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Machata [Mon, 6 Jan 2020 18:01:56 +0000 (18:01 +0000)]
net: sch_prio: When ungrafting, replace with FIFO
[ Upstream commit
240ce7f6428ff5188b9eedc066e1e4d645b8635f ]
When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.
Fix PRIO by first attempting to create a default Qdisc and only falling
back to noop when that fails. This pattern of attempting to create an
invisible FIFO, using NOOP only as a fallback, is also seen in other
Qdiscs.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Machata [Mon, 6 Jan 2020 18:01:55 +0000 (18:01 +0000)]
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
[ Upstream commit
3971a535b839489e4ea31796cc086e6ce616318c ]
The following patch will change PRIO to replace a removed Qdisc with an
invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the
graft message that is generated. But because FIFO does not issue its own
REPLACE message, when the graft operation takes place, the Qdisc that mlxsw
tracks under the indicated band is still the old one. The child
handle (0:0) therefore does not match, and mlxsw rejects the graft
operation, which leads to an extack message:
Warning: Offloading graft operation failed.
Fix by ignoring the invisible children in the PRIO graft handler. The
DESTROY message of the removed Qdisc is going to follow shortly and handle
the removal.
Fixes:
32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 7 Jan 2020 09:42:25 +0000 (01:42 -0800)]
vlan: vlan_changelink() should propagate errors
[ Upstream commit
eb8ef2a3c50092bb018077c047b8dba1ce0e78e3 ]
Both vlan_dev_change_flags() and vlan_dev_set_egress_priority()
can return an error. vlan_changelink() should not ignore them.
Fixes:
07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 7 Jan 2020 09:42:24 +0000 (01:42 -0800)]
vlan: fix memory leak in vlan_dev_set_egress_priority
[ Upstream commit
9bbd917e0bec9aebdbd0c8dbc966caec15eb33e9 ]
There are few cases where the ndo_uninit() handler might be not
called if an error happens while device is initialized.
Since vlan_newlink() calls vlan_changelink() before
trying to register the netdevice, we need to make sure
vlan_dev_uninit() has been called at least once,
or we might leak allocated memory.
BUG: memory leak
unreferenced object 0xffff888122a206c0 (size 32):
comm "syz-executor511", pid 7124, jiffies
4294950399 (age 32.240s)
hex dump (first 32 bytes):
00 00 00 00 00 00 61 73 00 00 00 00 00 00 00 00 ......as........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
000000000eb3bb85>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<
000000000eb3bb85>] slab_post_alloc_hook mm/slab.h:586 [inline]
[<
000000000eb3bb85>] slab_alloc mm/slab.c:3320 [inline]
[<
000000000eb3bb85>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549
[<
000000007b99f620>] kmalloc include/linux/slab.h:556 [inline]
[<
000000007b99f620>] vlan_dev_set_egress_priority+0xcc/0x150 net/8021q/vlan_dev.c:194
[<
000000007b0cb745>] vlan_changelink+0xd6/0x140 net/8021q/vlan_netlink.c:126
[<
0000000065aba83a>] vlan_newlink+0x135/0x200 net/8021q/vlan_netlink.c:181
[<
00000000fb5dd7a2>] __rtnl_newlink+0x89a/0xb80 net/core/rtnetlink.c:3305
[<
00000000ae4273a1>] rtnl_newlink+0x4e/0x80 net/core/rtnetlink.c:3363
[<
00000000decab39f>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424
[<
00000000accba4ee>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<
00000000319fe20f>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
[<
00000000d51938dc>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<
00000000d51938dc>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
[<
00000000e539ac79>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
[<
000000006250c27e>] sock_sendmsg_nosec net/socket.c:639 [inline]
[<
000000006250c27e>] sock_sendmsg+0x54/0x70 net/socket.c:659
[<
00000000e2a156d1>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
[<
000000008c87466e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
[<
00000000110e3054>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
[<
00000000d71077c8>] __do_sys_sendmsg net/socket.c:2426 [inline]
[<
00000000d71077c8>] __se_sys_sendmsg net/socket.c:2424 [inline]
[<
00000000d71077c8>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424
Fixe:
07b5b17e157b ("[VLAN]: Use rtnl_link API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Thu, 2 Jan 2020 09:23:45 +0000 (17:23 +0800)]
vxlan: fix tos value before xmit
[ Upstream commit
71130f29979c7c7956b040673e6b9d5643003176 ]
Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter
tos value by RT_TOS() instead of using config tos directly.
vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't
return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS()
directly in function ip_tunnel_ecn_encap().
Fixes:
206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API")
Fixes:
1400615d64cf ("vxlan: allow setting ipv6 traffic class")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pengcheng Yang [Mon, 30 Dec 2019 09:54:41 +0000 (17:54 +0800)]
tcp: fix "old stuff" D-SACK causing SACK to be treated as D-SACK
[ Upstream commit
c9655008e7845bcfdaac10a1ed8554ec167aea88 ]
When we receive a D-SACK, where the sequence number satisfies:
undo_marker <= start_seq < end_seq <= prior_snd_una
we consider this is a valid D-SACK and tcp_is_sackblock_valid()
returns true, then this D-SACK is discarded as "old stuff",
but the variable first_sack_index is not marked as negative
in tcp_sacktag_write_queue().
If this D-SACK also carries a SACK that needs to be processed
(for example, the previous SACK segment was lost), this SACK
will be treated as a D-SACK in the following processing of
tcp_sacktag_write_queue(), which will eventually lead to
incorrect updates of undo_retrans and reordering.
Fixes:
fd6dad616d4f ("[TCP]: Earlier SACK block verification & simplify access to them")
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Sat, 4 Jan 2020 06:15:02 +0000 (14:15 +0800)]
sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY
[ Upstream commit
be7a7729207797476b6666f046d765bdf9630407 ]
This patch is to fix a memleak caused by no place to free cmd->obj.chunk
for the unprocessed SCTP_CMD_REPLY. This issue occurs when failing to
process a cmd while there're still SCTP_CMD_REPLY cmds on the cmd seq
with an allocated chunk in cmd->obj.chunk.
So fix it by freeing cmd->obj.chunk for each SCTP_CMD_REPLY cmd left on
the cmd seq when any cmd returns error. While at it, also remove 'nomem'
label.
Reported-by: syzbot+107c4aff5f392bf1517f@syzkaller.appspotmail.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wen Yang [Thu, 2 Jan 2020 09:21:43 +0000 (17:21 +0800)]
sch_cake: avoid possible divide by zero in cake_enqueue()
[ Upstream commit
68aab823c223646fab311f8a6581994facee66a0 ]
The variables 'window_interval' is u64 and do_div()
truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
The unit of window_interval is nanoseconds,
so its lower 32-bit is relatively easy to exceed.
Fix this issue by using div64_u64() instead.
Fixes:
7298de9cd725 ("sch_cake: Add ingress mode")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: cake@lists.bufferbloat.net
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 6 Jan 2020 14:10:39 +0000 (06:10 -0800)]
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
[ Upstream commit
d9e15a2733067c9328fb56d98fe8e574fa19ec31 ]
As diagnosed by Florian :
If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :
if (f->credit <= 0) {
f->credit += q->quantum;
goto begin;
}
... because f->credit is either 0 or -
2147483648.
Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.
Fixes:
afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Florian Westphal <fw@strlen.de>
Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 7 Jan 2020 18:57:01 +0000 (10:57 -0800)]
net: usb: lan78xx: fix possible skb leak
[ Upstream commit
47240ba0cd09bb6fe6db9889582048324999dfa4 ]
If skb_linearize() fails, we need to free the skb.
TSO makes skb bigger, and this bug might be the reason
Raspberry Pi 3B+ users had to disable TSO.
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: RENARD Pierre-Francois <pfrenard@gmail.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Mon, 6 Jan 2020 03:09:22 +0000 (11:09 +0800)]
net: stmmac: dwmac-sunxi: Allow all RGMII modes
[ Upstream commit
52cc73e5404c7ba0cbfc50cb4c265108c84b3d5a ]
Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.
Fixes:
af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen-Yu Tsai [Mon, 6 Jan 2020 03:09:45 +0000 (11:09 +0800)]
net: stmmac: dwmac-sun8i: Allow all RGMII modes
[ Upstream commit
f1239d8aa84dad8fe4b6cc1356f40fc8e842db47 ]
Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.
Fixes:
9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Lunn [Sat, 4 Jan 2020 22:14:51 +0000 (23:14 +0100)]
net: dsa: mv88e6xxx: Preserve priority when setting CPU port.
[ Upstream commit
d8dc2c9676e614ef62f54a155b50076888c8a29a ]
The 6390 family uses an extended register to set the port connected to
the CPU. The lower 5 bits indicate the port, the upper three bits are
the priority of the frames as they pass through the switch, what
egress queue they should use, etc. Since frames being set to the CPU
are typically management frames, BPDU, IGMP, ARP, etc set the priority
to 7, the reset default, and the highest.
Fixes:
33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 6 Jan 2020 20:30:48 +0000 (12:30 -0800)]
macvlan: do not assume mac_header is set in macvlan_broadcast()
[ Upstream commit
96cc4b69581db68efc9749ef32e9cf8e0160c509 ]
Use of eth_hdr() in tx path is error prone.
Many drivers call skb_reset_mac_header() before using it,
but others do not.
Commit
6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit
d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.
Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.
Hopefully we will be able to revert
6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.
BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr
ffff8880a4932401 by task syz-executor947/9579
CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145
__get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
mc_hash drivers/net/macvlan.c:251 [inline]
macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
macvlan_queue_xmit drivers/net/macvlan.c:520 [inline]
macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559
__netdev_start_xmit include/linux/netdevice.h:4447 [inline]
netdev_start_xmit include/linux/netdevice.h:4461 [inline]
dev_direct_xmit+0x419/0x630 net/core/dev.c:4079
packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240
packet_snd net/packet/af_packet.c:2966 [inline]
packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:659
__sys_sendto+0x262/0x380 net/socket.c:1985
__do_sys_sendto net/socket.c:1997 [inline]
__se_sys_sendto net/socket.c:1993 [inline]
__x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x442639
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007ffc13549e08 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000442639
RDX:
000000000000000e RSI:
0000000020000080 RDI:
0000000000000003
RBP:
0000000000000004 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
0000000000403bb0 R14:
0000000000000000 R15:
0000000000000000
Allocated by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
__do_kmalloc mm/slab.c:3656 [inline]
__kmalloc+0x163/0x770 mm/slab.c:3665
kmalloc include/linux/slab.h:561 [inline]
tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9389:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kfree+0x10a/0x2c0 mm/slab.c:3757
tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289
tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
security_inode_getattr+0xf2/0x150 security/security.c:1222
vfs_getattr+0x25/0x70 fs/stat.c:115
vfs_statx_fd+0x71/0xc0 fs/stat.c:145
vfs_fstat include/linux/fs.h:3265 [inline]
__do_sys_newfstat+0x9b/0x120 fs/stat.c:378
__se_sys_newfstat fs/stat.c:375 [inline]
__x64_sys_newfstat+0x54/0x80 fs/stat.c:375
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8880a4932000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1025 bytes inside of
4096-byte region [
ffff8880a4932000,
ffff8880a4933000)
The buggy address belongs to the page:
page:
ffffea0002924c80 refcount:1 mapcount:0 mapping:
ffff8880aa402000 index:0x0 compound_mapcount: 0
raw:
00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000
raw:
0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes:
b863ceb7ddce ("[NET]: Add macvlan driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 6 Jan 2020 14:45:37 +0000 (06:45 -0800)]
gtp: fix bad unlock balance in gtp_encap_enable_socket
[ Upstream commit
90d72256addff9e5f8ad645e8f632750dd1f8935 ]
WARNING: bad unlock balance detected!
5.5.0-rc5-syzkaller #0 Not tainted
-------------------------------------
syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at:
[<
ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
but there are no more locks to release!
other info that might help us debug this:
2 locks held by syz-executor921/9688:
#0:
ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline]
#0:
ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421
#1:
ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline]
#1:
ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951
stack backtrace:
CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline]
print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984
__lock_release kernel/locking/lockdep.c:4242 [inline]
lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503
sock_release_ownership include/net/sock.h:1496 [inline]
release_sock+0x17c/0x1c0 net/core/sock.c:2961
gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
gtp_encap_enable drivers/net/gtp.c:852 [inline]
gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666
__rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305
rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363
rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:659
____sys_sendmsg+0x753/0x880 net/socket.c:2330
___sys_sendmsg+0x100/0x170 net/socket.c:2384
__sys_sendmsg+0x105/0x1d0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg net/socket.c:2424 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x445d49
Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f8019074db8 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00000000006dac38 RCX:
0000000000445d49
RDX:
0000000000000000 RSI:
0000000020000180 RDI:
0000000000000003
RBP:
00000000006dac30 R08:
0000000000000004 R09:
0000000000000000
R10:
0000000000000008 R11:
0000000000000246 R12:
00000000006dac3c
R13:
00007ffea687f6bf R14:
00007f80190759c0 R15:
20c49ba5e353f7cf
Fixes:
e198987e7dd7 ("gtp: fix suspicious RCU usage")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Logan Gunthorpe [Tue, 10 Sep 2019 19:58:33 +0000 (13:58 -0600)]
PCI/switchtec: Read all 64 bits of part_event_bitmap
commit
6acdf7e19b37cb3a9258603d0eab315079c19c5e upstream.
The part_event_bitmap register is 64 bits wide, so read it with ioread64()
instead of the 32-bit ioread32().
Fixes:
52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver")
Link: https://lore.kernel.org/r/20190910195833.3891-1-logang@deltatee.com
Reported-by: Doug Meyer <dmeyer@gigaio.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.12+
Cc: Kelvin Cao <Kelvin.Cao@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anson Huang [Fri, 14 Sep 2018 02:59:21 +0000 (10:59 +0800)]
ARM: dts: imx6ul: use nvmem-cells for cpu speed grading
commit
92f0eb08c66a73594cf200e65689e767f7f0da5e upstream.
On i.MX6UL, accessing OCOTP directly is wrong because the ocotp clock
needs to be enabled first, so use the nvmem-cells binding instead.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anson Huang [Mon, 8 Oct 2018 06:07:34 +0000 (14:07 +0800)]
cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull
commit
2733fb0d0699246711cf622e0e2faf02a05b69dc upstream.
On i.MX6UL/i.MX6ULL, accessing OCOTP directly is wrong because
the ocotp clock needs to be enabled first. Add support for reading
OCOTP through the nvmem API, and keep the old method there to
support old dtb.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Mon, 23 Dec 2019 13:31:47 +0000 (14:31 +0100)]
powerpc/spinlocks: Include correct header for static key
commit
6da3eced8c5f3b03340b0c395bacd552c4d52411 upstream.
Recently, the spinlock implementation grew a static key optimization,
but the jump_label.h header include was left out, leading to build
errors:
linux/arch/powerpc/include/asm/spinlock.h:44:7: error: implicit declaration of function ‘static_branch_unlikely’
44 | if (!static_branch_unlikely(&shared_processor))
This commit adds the missing header.
mpe: The build break is only seen with CONFIG_JUMP_LABEL=n.
Fixes:
656c21d6af5d ("powerpc/shared: Use static key to detect shared processor")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191223133147.129983-1-Jason@zx2c4.com
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srikar Dronamraju [Thu, 5 Dec 2019 08:32:17 +0000 (14:02 +0530)]
powerpc/vcpu: Assume dedicated processors as non-preempt
commit
14c73bd344da60abaf7da3ea2e7733ddda35bbac upstream.
With commit
247f2f6f3c70 ("sched/core: Don't schedule threads on
pre-empted vCPUs"), the scheduler avoids preempted vCPUs to schedule
tasks on wakeup. This leads to wrong choice of CPU, which in-turn
leads to larger wakeup latencies. Eventually, it leads to performance
regression in latency sensitive benchmarks like soltp, schbench etc.
On Powerpc, vcpu_is_preempted() only looks at yield_count. If the
yield_count is odd, the vCPU is assumed to be preempted. However
yield_count is increased whenever the LPAR enters CEDE state (idle).
So any CPU that has entered CEDE state is assumed to be preempted.
Even if vCPU of dedicated LPAR is preempted/donated, it should have
right of first-use since they are supposed to own the vCPU.
On a Power9 System with 32 cores:
# lscpu
Architecture: ppc64le
Byte Order: Little Endian
CPU(s): 128
On-line CPU(s) list: 0-127
Thread(s) per core: 8
Core(s) per socket: 1
Socket(s): 16
NUMA node(s): 2
Model: 2.2 (pvr 004e 0202)
Model name: POWER9 (architected), altivec supported
Hypervisor vendor: pHyp
Virtualization type: para
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 10240K
NUMA node0 CPU(s): 0-63
NUMA node1 CPU(s): 64-127
# perf stat -a -r 5 ./schbench
v5.4 v5.4 + patch
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 45
75.0000th: 62 75.0th: 63
90.0000th: 71 90.0th: 74
95.0000th: 77 95.0th: 78
*99.0000th: 91 *99.0th: 82
99.5000th: 707 99.5th: 83
99.9000th: 6920 99.9th: 86
min=0, max=10048 min=0, max=96
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 46
75.0000th: 61 75.0th: 64
90.0000th: 72 90.0th: 75
95.0000th: 79 95.0th: 79
*99.0000th: 691 *99.0th: 83
99.5000th: 3972 99.5th: 85
99.9000th: 8368 99.9th: 91
min=0, max=16606 min=0, max=117
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 46
75.0000th: 61 75.0th: 64
90.0000th: 71 90.0th: 75
95.0000th: 77 95.0th: 79
*99.0000th: 106 *99.0th: 83
99.5000th: 2364 99.5th: 84
99.9000th: 7480 99.9th: 90
min=0, max=10001 min=0, max=95
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 45 50.0th: 47
75.0000th: 62 75.0th: 65
90.0000th: 72 90.0th: 75
95.0000th: 78 95.0th: 79
*99.0000th: 93 *99.0th: 84
99.5000th: 108 99.5th: 85
99.9000th: 6792 99.9th: 90
min=0, max=17681 min=0, max=117
Latency percentiles (usec) Latency percentiles (usec)
50.0000th: 46 50.0th: 45
75.0000th: 62 75.0th: 64
90.0000th: 73 90.0th: 75
95.0000th: 79 95.0th: 79
*99.0000th: 113 *99.0th: 82
99.5000th: 2724 99.5th: 83
99.9000th: 6184 99.9th: 93
min=0, max=9887 min=0, max=111
Performance counter stats for 'system wide' (5 runs):
context-switches 43,373 ( +- 0.40% ) 44,597 ( +- 0.55% )
cpu-migrations 1,211 ( +- 5.04% ) 220 ( +- 6.23% )
page-faults 15,983 ( +- 5.21% ) 15,360 ( +- 3.38% )
Waiman Long suggested using static_keys.
Fixes:
247f2f6f3c70 ("sched/core: Don't schedule threads on pre-empted vCPUs")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Parth Shah <parth@linux.ibm.com>
Reported-by: Ihor Pasichnyk <Ihor.Pasichnyk@ibm.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com>
Tested-by: Parth Shah <parth@linux.ibm.com>
[mpe: Move the key and setting of the key to pseries/setup.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191213035036.6913-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haiyang Zhang [Fri, 20 Dec 2019 02:28:10 +0000 (18:28 -0800)]
hv_netvsc: Fix unwanted rx_table reset
[ Upstream commit
b0689faa8efc5a3391402d7ae93bd373b7248e51 ]
In existing code, the receive indirection table, rx_table, is in
struct rndis_device, which will be reset when changing MTU, ringparam,
etc. User configured receive indirection table values will be lost.
To fix this, move rx_table to struct net_device_context, and check
netif_is_rxfh_configured(), so rx_table will be set to default only
if no user configured value.
Fixes:
ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chan Shu Tak, Alex [Thu, 19 Dec 2019 06:16:18 +0000 (14:16 +0800)]
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
[ Upstream commit
af1c0e4e00f3cc76cb136ebf2e2c04e8b6446285 ]
When a frame with NULL DSAP is received, llc_station_rcv is called.
In turn, llc_stat_ev_rx_null_dsap_xid_c is called to check if it is a NULL
XID frame. The return statement of llc_stat_ev_rx_null_dsap_xid_c returns 1
when the incoming frame is not a NULL XID frame and 0 otherwise. Hence, a
NULL XID response is returned unexpectedly, e.g. when the incoming frame is
a NULL TEST command.
To fix the error, simply remove the conditional operator.
A similar error in llc_stat_ev_rx_null_dsap_test_c is also fixed.
Signed-off-by: Chan Shu Tak, Alex <alexchan@task.com.hk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Helge Deller [Fri, 20 Dec 2019 20:00:19 +0000 (21:00 +0100)]
parisc: Fix compiler warnings in debug_core.c
[ Upstream commit
75cf9797006a3a9f29a3a25c1febd6842a4a9eb2 ]
Fix this compiler warning:
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
arch/parisc/include/asm/cmpxchg.h:48:3: warning: value computed is not used [-Wunused-value]
48 | ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
arch/parisc/include/asm/atomic.h:78:30: note: in expansion of macro ‘xchg’
78 | #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
| ^~~~
kernel/debug/debug_core.c:596:4: note: in expansion of macro ‘atomic_xchg’
596 | atomic_xchg(&kgdb_active, cpu);
| ^~~~~~~~~~~
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 18 Dec 2019 08:44:04 +0000 (16:44 +0800)]
block: fix memleak when __blk_rq_map_user_iov() is failed
[ Upstream commit
3b7995a98ad76da5597b488fa84aa5a56d43b608 ]
When I doing fuzzy test, get the memleak report:
BUG: memory leak
unreferenced object 0xffff88837af80000 (size 4096):
comm "memleak", pid 3557, jiffies
4294817681 (age 112.499s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
20 00 00 00 10 01 00 00 00 00 00 00 01 00 00 00 ...............
backtrace:
[<
000000001c894df8>] bio_alloc_bioset+0x393/0x590
[<
000000008b139a3c>] bio_copy_user_iov+0x300/0xcd0
[<
00000000a998bd8c>] blk_rq_map_user_iov+0x2f1/0x5f0
[<
000000005ceb7f05>] blk_rq_map_user+0xf2/0x160
[<
000000006454da92>] sg_common_write.isra.21+0x1094/0x1870
[<
00000000064bb208>] sg_write.part.25+0x5d9/0x950
[<
000000004fc670f6>] sg_write+0x5f/0x8c
[<
00000000b0d05c7b>] __vfs_write+0x7c/0x100
[<
000000008e177714>] vfs_write+0x1c3/0x500
[<
0000000087d23f34>] ksys_write+0xf9/0x200
[<
000000002c8dbc9d>] do_syscall_64+0x9f/0x4f0
[<
00000000678d8e9a>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
If __blk_rq_map_user_iov() is failed in blk_rq_map_user_iov(),
the bio(s) which is allocated before this failing will leak. The
refcount of the bio(s) is init to 1 and increased to 2 by calling
bio_get(), but __blk_rq_unmap_user() only decrease it to 1, so
the bio cannot be freed. Fix it by calling blk_rq_unmap_user().
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Haberland [Thu, 19 Dec 2019 08:43:51 +0000 (09:43 +0100)]
s390/dasd: fix memleak in path handling error case
[ Upstream commit
00b39f698a4f1ee897227cace2e3937fc4412270 ]
If for whatever reason the dasd_eckd_check_characteristics() function
exits after at least some paths have their configuration data
allocated those data is never freed again. In the error case the
device->private pointer is set to NULL and dasd_eckd_uncheck_device()
will exit without freeing the path data because of this NULL pointer.
Fix by calling dasd_eckd_clear_conf_data() for error cases.
Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device()
to avoid code duplication.
Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Höppner [Thu, 19 Dec 2019 08:43:50 +0000 (09:43 +0100)]
s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly
[ Upstream commit
dd4b3c83b9efac10d48a94c61372119fc555a077 ]
The max data count (mdc) is an unsigned 16-bit integer value as per AR
documentation and is received via ccw_device_get_mdc() for a specific
path mask from the CIO layer. The function itself also always returns a
positive mdc value or 0 in case mdc isn't supported or couldn't be
determined.
Though, the comment for this function describes a negative return value
to indicate failures.
As a result, the DASD device driver interprets the return value of
ccw_device_get_mdc() incorrectly. The error case is essentially a dead
code path.
To fix this behaviour, check explicitly for a return value of 0 and
change the comment for ccw_device_get_mdc() accordingly.
This fix merely enables the error code path in the DASD functions
get_fcx_max_data() and verify_fcx_max_data(). The actual functionality
stays the same and is still correct.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Mon, 18 Nov 2019 11:39:55 +0000 (19:39 +0800)]
drm/exynos: gsc: add missed component_del
[ Upstream commit
84c92365b20a44c363b95390ea00dfbdd786f031 ]
The driver forgets to call component_del in remove to match component_add
in probe.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Borntraeger [Wed, 18 Dec 2019 08:34:57 +0000 (09:34 +0100)]
s390/purgatory: do not build purgatory with kcov, kasan and friends
[ Upstream commit
c23587c92f6e3260fe3b82bb75b38aa2553b9468 ]
the purgatory must not rely on functions from the "old" kernel,
so we must disable kasan and friends. We also need to have a
separate copy of string.c as the default does not build memcmp
with KASAN.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Abreu [Wed, 18 Dec 2019 10:17:43 +0000 (11:17 +0100)]
net: stmmac: Always arm TX Timer at end of transmission start
[ Upstream commit
4772f26db8d1fb568c4862c538344a1b5fb52081 ]
If TX Coalesce timer is enabled we should always arm it, otherwise we
may hit the case where an interrupt is missed and the TX Queue will
timeout.
Arming the timer does not necessarly mean it will run the tx_clean()
because this function is wrapped around NAPI launcher.
Fixes:
9125cdd1be11 ("stmmac: add the initial tx coalesce schema")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Abreu [Wed, 18 Dec 2019 10:17:40 +0000 (11:17 +0100)]
net: stmmac: RX buffer size must be 16 byte aligned
[ Upstream commit
8d558f0294fe92e04af192e221d0d0f6a180ee7b ]
We need to align the RX buffer size to at least 16 byte so that IP
doesn't mis-behave. This is required by HW.
Changes from v2:
- Align UP and not DOWN (David)
Fixes:
7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Abreu [Wed, 18 Dec 2019 10:17:39 +0000 (11:17 +0100)]
net: stmmac: xgmac: Clear previous RX buffer size
[ Upstream commit
11d55fd9975f8e46a0e5e19c14899544e81e1e15 ]
When switching between buffer sizes we need to clear the previous value.
Fixes:
d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jose Abreu [Wed, 18 Dec 2019 10:17:37 +0000 (11:17 +0100)]
net: stmmac: Do not accept invalid MTU values
[ Upstream commit
eaf4fac478077d4ed57cbca2c044c4b58a96bd98 ]
The maximum MTU value is determined by the maximum size of TX FIFO so
that a full packet can fit in the FIFO. Add a check for this in the MTU
change callback.
Also check if provided and rounded MTU does not passes the maximum limit
of 16K.
Changes from v2:
- Align MTU before checking if its valid
Fixes:
7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Sandeen [Fri, 6 Dec 2019 16:54:23 +0000 (10:54 -0600)]
fs: avoid softlockups in s_inodes iterators
[ Upstream commit
04646aebd30b99f2cfa0182435a2ec252fcb16d0 ]
Anything that walks all inodes on sb->s_inodes list without rescheduling
risks softlockups.
Previous efforts were made in 2 functions, see:
c27d82f fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()
ac05fbb inode: don't softlockup when evicting inodes
but there hasn't been an audit of all walkers, so do that now. This
also consistently moves the cond_resched() calls to the bottom of each
loop in cases where it already exists.
One loop remains: remove_dquot_ref(), because I'm not quite sure how
to deal with that one w/o taking the i_lock.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Shishkin [Tue, 10 Dec 2019 10:51:01 +0000 (12:51 +0200)]
perf/x86/intel: Fix PT PMI handling
[ Upstream commit
92ca7da4bdc24d63bb0bcd241c11441ddb63b80a ]
Commit:
ccbebba4c6bf ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it")
skips the PT/LBR exclusivity check on CPUs where PT and LBRs coexist, but
also inadvertently skips the active_events bump for PT in that case, which
is a bug. If there aren't any hardware events at the same time as PT, the
PMI handler will ignore PT PMIs, as active_events reads zero in that case,
resulting in the "Uhhuh" spurious NMI warning and PT data loss.
Fix this by always increasing active_events for PT events.
Fixes:
ccbebba4c6bf ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it")
Reported-by: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20191210105101.77210-1-alexander.shishkin@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Hebb [Mon, 9 Dec 2019 08:19:17 +0000 (00:19 -0800)]
kconfig: don't crash on NULL expressions in expr_eq()
[ Upstream commit
272a72103012862e3a24ea06635253ead0b6e808 ]
NULL expressions are taken to always be true, as implemented by the
expr_is_yes() macro and by several other functions in expr.c. As such,
they ought to be valid inputs to expr_eq(), which compares two
expressions.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaotao Yin [Tue, 10 Dec 2019 04:27:04 +0000 (12:27 +0800)]
iommu/iova: Init the struct iova to fix the possible memleak
[ Upstream commit
472d26df5e8075eda677b6be730e0fbf434ff2a8 ]
During ethernet(Marvell octeontx2) set ring buffer test:
ethtool -G eth1 rx <rx ring size> tx <tx ring size>
following kmemleak will happen sometimes:
unreferenced object 0xffff000b85421340 (size 64):
comm "ethtool", pid 867, jiffies
4295323539 (age 550.500s)
hex dump (first 64 bytes):
80 13 42 85 0b 00 ff ff ff ff ff ff ff ff ff ff ..B.............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
000000001b204ddf>] kmem_cache_alloc+0x1b0/0x350
[<
00000000d9ef2e50>] alloc_iova+0x3c/0x168
[<
00000000ea30f99d>] alloc_iova_fast+0x7c/0x2d8
[<
00000000b8bb2f1f>] iommu_dma_alloc_iova.isra.0+0x12c/0x138
[<
000000002f1a43b5>] __iommu_dma_map+0x8c/0xf8
[<
00000000ecde7899>] iommu_dma_map_page+0x98/0xf8
[<
0000000082004e59>] otx2_alloc_rbuf+0xf4/0x158
[<
000000002b107f6b>] otx2_rq_aura_pool_init+0x110/0x270
[<
00000000c3d563c7>] otx2_open+0x15c/0x734
[<
00000000a2f5f3a8>] otx2_dev_open+0x3c/0x68
[<
00000000456a98b5>] otx2_set_ringparam+0x1ac/0x1d4
[<
00000000f2fbb819>] dev_ethtool+0xb84/0x2028
[<
0000000069b67c5a>] dev_ioctl+0x248/0x3a0
[<
00000000af38663a>] sock_ioctl+0x280/0x638
[<
000000002582384c>] do_vfs_ioctl+0x8b0/0xa80
[<
000000004e1a2c02>] ksys_ioctl+0x84/0xb8
The reason:
When alloc_iova_mem() without initial with Zero, sometimes fpn_lo will
equal to IOVA_ANCHOR by chance, so when return with -ENOMEM(iova32_full)
from __alloc_and_insert_iova_range(), the new_iova will not be freed in
free_iova_mem().
Fixes:
bb68b2fbfbd6 ("iommu/iova: Add rbtree anchor node")
Signed-off-by: Xiaotao Yin <xiaotao.yin@windriver.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Kemnade [Wed, 11 Dec 2019 22:16:00 +0000 (23:16 +0100)]
regulator: rn5t618: fix module aliases
[ Upstream commit
62a1923cc8fe095912e6213ed5de27abbf1de77e ]
platform device aliases were missing, preventing
autoloading of module.
Fixes:
811b700630ff ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shengjiu Wang [Wed, 11 Dec 2019 11:57:22 +0000 (19:57 +0800)]
ASoC: wm8962: fix lambda value
[ Upstream commit
556672d75ff486e0b6786056da624131679e0576 ]
According to user manual, it is required that FLL_LAMBDA > 0
in all cases (Integer and Franctional modes).
Fixes:
9a76f1ff6e29 ("ASoC: Add initial WM8962 CODEC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Sun, 15 Dec 2019 15:34:08 +0000 (09:34 -0600)]
rfkill: Fix incorrect check to avoid NULL pointer dereference
[ Upstream commit
6fc232db9e8cd50b9b83534de9cd91ace711b2d7 ]
In rfkill_register, the struct rfkill pointer is first derefernced
and then checked for NULL. This patch removes the BUG_ON and returns
an error to the caller in case rfkill is NULL.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Link: https://lore.kernel.org/r/20191215153409.21696-1-pakki001@umn.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Sun, 15 Dec 2019 19:09:27 +0000 (20:09 +0100)]
parisc: add missing __init annotation
[ Upstream commit
aeea5eae4fd54e94d820ed17ea3b238160be723e ]
compilation failed with:
MODPOST vmlinux.o
WARNING: vmlinux.o(.text.unlikely+0xa0c): Section mismatch in reference from the function walk_lower_bus() to the function .init.text:walk_native_bus()
The function walk_lower_bus() references
the function __init walk_native_bus().
This is often because walk_lower_bus lacks a __init
annotation or the annotation of walk_native_bus is wrong.
FATAL: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
make[2]: *** [/home/svens/linux/parisc-linux/src/scripts/Makefile.modpost:64: __modpost] Error 1
make[1]: *** [/home/svens/linux/parisc-linux/src/Makefile:1077: vmlinux] Error 2
make[1]: Leaving directory '/home/svens/linux/parisc-linux/build'
make: *** [Makefile:179: sub-make] Error 2
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cristian Birsan [Fri, 13 Dec 2019 16:33:11 +0000 (18:33 +0200)]
net: usb: lan78xx: Fix error message format specifier
[ Upstream commit
858ce8ca62ea1530f2779d0e3f934b0176e663c3 ]
Display the return code as decimal integer.
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vishal Kulkarni [Fri, 13 Dec 2019 01:09:39 +0000 (06:39 +0530)]
cxgb4: Fix kernel panic while accessing sge_info
[ Upstream commit
479a0d1376f6d97c60871442911f1394d4446a25 ]
The sge_info debugfs collects offload queue info even when offload
capability is disabled and leads to panic.
[ 144.139871] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 144.139874] CR2:
0000000000000000 CR3:
000000082d456005 CR4:
00000000001606e0
[ 144.139876] Call Trace:
[ 144.139887] sge_queue_start+0x12/0x30 [cxgb4]
[ 144.139897] seq_read+0x1d4/0x3d0
[ 144.139906] full_proxy_read+0x50/0x70
[ 144.139913] vfs_read+0x89/0x140
[ 144.139916] ksys_read+0x55/0xd0
[ 144.139924] do_syscall_64+0x5b/0x1d0
[ 144.139933] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 144.139936] RIP: 0033:0x7f4b01493990
Fix this crash by skipping the offload queue access in sge_qinfo when
offload capability is disabled
Signed-off-by: Herat Ramani <herat@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manish Chopra [Wed, 11 Dec 2019 17:59:56 +0000 (09:59 -0800)]
bnx2x: Fix logic to get total no. of PFs per engine
[ Upstream commit
ee699f89bdbaa19c399804504241b5c531b48888 ]
Driver doesn't calculate total number of PFs configured on a
given engine correctly which messed up resources in the PFs
loaded on that engine, leading driver to exceed configuration
of resources (like vlan filters etc.) beyond the limit per
engine, which ended up with asserts from the firmware.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manish Chopra [Wed, 11 Dec 2019 17:59:55 +0000 (09:59 -0800)]
bnx2x: Do not handle requests from VFs after parity
[ Upstream commit
7113f796bbbced2470cd6d7379d50d7a7a78bf34 ]
Parity error from the hardware will cause PF to lose the state
of their VFs due to PF's internal reload and hardware reset following
the parity error. Restrict any configuration request from the VFs after
the parity as it could cause unexpected hardware behavior, only way
for VFs to recover would be to trigger FLR on VFs and reload them.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenz Bauer [Fri, 13 Dec 2019 18:08:17 +0000 (18:08 +0000)]
bpf: Clear skb->tstamp in bpf_redirect when necessary
[ Upstream commit
5133498f4ad1123a5ffd4c08df6431dab882cc32 ]
Redirecting a packet from ingress to egress by using bpf_redirect
breaks if the egress interface has an fq qdisc installed. This is the same
problem as fixed in 'commit
8203e2d844d3 ("net: clear skb->tstamp in forwarding paths")
Clear skb->tstamp when redirecting into the egress path.
Fixes:
80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Fixes:
fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20191213180817.2510-1-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nikolay Borisov [Mon, 18 Nov 2019 12:16:44 +0000 (14:16 +0200)]
btrfs: Fix error messages in qgroup_rescan_init
[ Upstream commit
37d02592f11bb76e4ab1dcaa5b8a2a0715403207 ]
The branch of qgroup_rescan_init which is executed from the mount
path prints wrong errors messages. The textual print out in case
BTRFS_QGROUP_STATUS_FLAG_RESCAN/BTRFS_QGROUP_STATUS_FLAG_ON are not
set are transposed. Fix it by exchanging their place.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Rapoport [Wed, 4 Dec 2019 12:35:24 +0000 (14:35 +0200)]
powerpc: Ensure that swiotlb buffer is allocated from low memory
[ Upstream commit
8fabc623238e68b3ac63c0dd1657bf86c1fa33af ]
Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G.
If a system has more physical memory than this limit, the swiotlb
buffer is not addressable because it is allocated from memblock using
top-down mode.
Force memblock to bottom-up mode before calling swiotlb_init() to
ensure that the swiotlb buffer is DMA-able.
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191204123524.22919-1-rppt@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel T. Lee [Thu, 5 Dec 2019 08:01:14 +0000 (17:01 +0900)]
samples: bpf: fix syscall_tp due to unused syscall
[ Upstream commit
fe3300897cbfd76c6cb825776e5ac0ca50a91ca4 ]
Currently, open() is called from the user program and it calls the syscall
'sys_openat', not the 'sys_open'. This leads to an error of the program
of user side, due to the fact that the counter maps are zero since no
function such 'sys_open' is called.
This commit adds the kernel bpf program which are attached to the
tracepoint 'sys_enter_openat' and 'sys_enter_openat'.
Fixes:
1da236b6be963 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel T. Lee [Thu, 5 Dec 2019 08:01:13 +0000 (17:01 +0900)]
samples: bpf: Replace symbol compare of trace_event
[ Upstream commit
bba1b2a890253528c45aa66cf856f289a215bfbc ]
Previously, when this sample is added, commit
1c47910ef8013
("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and
'sys_write' has been used without no prefixes. But currently there are
no exact symbols with these under kallsyms and this leads to failure.
This commit changes exact compare to substring compare to keep compatible
with exact symbol or prefixed symbol.
Fixes:
1c47910ef8013 ("samples/bpf: add perf_event+bpf example")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205080114.19766-2-danieltimlee@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tomi Valkeinen [Thu, 14 Nov 2019 09:39:48 +0000 (11:39 +0200)]
ARM: dts: am437x-gp/epos-evm: fix panel compatible
[ Upstream commit
c6b16761c6908d3dc167a0a566578b4b0b972905 ]
The LCD panel on AM4 GP EVMs and ePOS boards seems to be
osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly
the panel has changed since the early EVMs, or there has been a mistake
with the panel type.
Update the DT files accordingly.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vignesh Raghavendra [Wed, 11 Dec 2019 15:52:16 +0000 (21:22 +0530)]
spi: spi-ti-qspi: Fix a bug when accessing non default CS
[ Upstream commit
c52c91bb9aa6bd8c38dbf9776158e33038aedd43 ]
When switching ChipSelect from default CS0 to any other CS, driver fails
to update the bits in system control module register that control which
CS is mapped for MMIO access. This causes reads to fail when driver
tries to access QSPI flash on CS1/2/3.
Fix this by updating appropriate bits whenever active CS changes.
Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20191211155216.30212-1-vigneshr@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Chaignon [Mon, 9 Dec 2019 18:52:52 +0000 (19:52 +0100)]
bpf, mips: Limit to 33 tail calls
[ Upstream commit
e49e6f6db04e915dccb494ae10fa14888fea6f89 ]
All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime. In addition, a test was recently added, in tailcalls2,
to check this limit.
This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.
Fixes:
b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasundhara Volam [Tue, 10 Dec 2019 07:49:09 +0000 (02:49 -0500)]
bnxt_en: Return error if FW returns more data than dump length
[ Upstream commit
c74751f4c39232c31214ec6a3bc1c7e62f5c728b ]
If any change happened in the configuration of VF in VM while
collecting live dump, there could be a race and firmware can return
more data than allocated dump length. Fix it by keeping track of
the accumulated core dump length copied so far and abort the copy
with error code if the next chunk of core dump will exceed the
original dump length.
Fixes:
6c5657d085ae ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Wahren [Sat, 30 Nov 2019 12:31:13 +0000 (13:31 +0100)]
ARM: dts: bcm283x: Fix critical trip point
[ Upstream commit
30e647a764d446723a7e0fb08d209e0104f16173 ]
During definition of the CPU thermal zone of BCM283x SoC family there
was a misunderstanding of the meaning "criticial trip point" and the
thermal throttling range of the VideoCore firmware. The latter one takes
effect when the core temperature is at least 85 degree celsius or higher
So the current critical trip point doesn't make sense, because the
thermal shutdown appears before the firmware has a chance to throttle
the ARM core(s).
Fix these unwanted shutdowns by increasing the critical trip point
to a value which shouldn't be reached with working thermal throttling.
Fixes:
0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Tarcatu [Tue, 10 Dec 2019 00:39:39 +0000 (18:39 -0600)]
ASoC: topology: Check return value for soc_tplg_pcm_create()
[ Upstream commit
a3039aef52d9ffeb67e9211899cd3e8a2953a01f ]
The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.
Fix that by checking the status and rejecting the topology on error.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Fri, 6 Dec 2019 07:55:00 +0000 (15:55 +0800)]
spi: spi-cavium-thunderx: Add missing pci_release_regions()
[ Upstream commit
a841e2853e1afecc2ee692b8cc5bff606bc84e4c ]
The driver forgets to call pci_release_regions() in probe failure
and remove.
Add the missed calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191206075500.18525-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Fri, 6 Dec 2019 18:19:09 +0000 (10:19 -0800)]
ARM: dts: Cygnus: Fix MDIO node address/size cells
[ Upstream commit
fac2c2da3596d77c343988bb0d41a8c533b2e73c ]
The MDIO node on Cygnus had an reversed #address-cells and
#size-cells properties, correct those.
Fixes:
40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY")
Reported-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu [Tue, 26 Nov 2019 08:34:42 +0000 (17:34 +0900)]
selftests/ftrace: Fix multiple kprobe testcase
[ Upstream commit
5cc6c8d4a99d0ee4d5466498e258e593df1d3eb6 ]
Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
- Since `wc -l FILE` returns not only line number but also
FILE filename, following "if" statement always failed.
Fix this bug by replacing it with 'cat FILE | wc -l'
- Since "while do-done loop" block with pipeline becomes a
subshell, $N local variable is not update outside of
the loop.
Fix this bug by using actual target number (256) instead
of $N.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Fri, 6 Dec 2019 00:01:20 +0000 (16:01 -0800)]
ARM: dts: BCM5301X: Fix MDIO node address/size cells
[ Upstream commit
093c3f94e922d83a734fc4da08cc5814990f32c6 ]
The MDIO node on BCM5301X had an reversed #address-cells and
#size-cells properties, correct those, silencing checker warnings:
.../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@
18003000: #address-cells:0:0: 1 was expected
Reported-by: Simon Horman <simon.horman@netronome.com>
Fixes:
23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Fri, 6 Dec 2019 21:09:14 +0000 (22:09 +0100)]
netfilter: nf_tables: validate NFT_DATA_VALUE after nft_data_init()
[ Upstream commit
0d2c96af797ba149e559c5875c0151384ab6dd14 ]
Userspace might bogusly sent NFT_DATA_VERDICT in several netlink
attributes that assume NFT_DATA_VALUE. Moreover, make sure that error
path invokes nft_data_release() to decrement the reference count on the
chain object.
Fixes:
96518518cc41 ("netfilter: add nftables")
Fixes:
0f3cd9b36977 ("netfilter: nf_tables: add range expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Fri, 6 Dec 2019 20:55:20 +0000 (21:55 +0100)]
netfilter: nf_tables: validate NFT_SET_ELEM_INTERVAL_END
[ Upstream commit
bffc124b6fe37d0ae9b428d104efb426403bb5c9 ]
Only NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_FLAGS make sense for elements
whose NFT_SET_ELEM_INTERVAL_END flag is set on.
Fixes:
96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Fri, 6 Dec 2019 19:23:29 +0000 (20:23 +0100)]
netfilter: nft_set_rbtree: bogus lookup/get on consecutive elements in named sets
[ Upstream commit
db3b665dd77b34e34df00e17d7b299c98fcfb2c5 ]
The existing rbtree implementation might store consecutive elements
where the closing element and the opening element might overlap, eg.
[ a, a+1) [ a+1, a+2)
This patch removes the optimization for non-anonymous sets in the exact
matching case, where it is assumed to stop searching in case that the
closing element is found. Instead, invalidate candidate interval and
keep looking further in the tree.
The lookup/get operation might return false, while there is an element
in the rbtree. Moreover, the get operation returns true as if a+2 would
be in the tree. This happens with named sets after several set updates.
The existing lookup optimization (that only works for the anonymous
sets) might not reach the opening [ a+1,... element if the closing
...,a+1) is found in first place when walking over the rbtree. Hence,
walking the full tree in that case is needed.
This patch fixes the lookup and get operations.
Fixes:
e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates")
Fixes:
ba0e4d9917b4 ("netfilter: nf_tables: get set elements via netlink")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Phil Sutter [Thu, 5 Dec 2019 12:35:11 +0000 (13:35 +0100)]
netfilter: uapi: Avoid undefined left-shift in xt_sctp.h
[ Upstream commit
164166558aacea01b99c8c8ffb710d930405ba69 ]
With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is
undefined for the signed 32-bit value 1. Avoid this by declaring 1 as
unsigned.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudeep Holla [Wed, 27 Nov 2019 15:56:40 +0000 (15:56 +0000)]
ARM: vexpress: Set-up shared OPP table instead of individual for each CPU
[ Upstream commit
2a76352ad2cc6b78e58f737714879cc860903802 ]
Currently we add individual copy of same OPP table for each CPU within
the cluster. This is redundant and doesn't reflect the reality.
We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init()
anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online()
->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug
operations. It also may cause issues when the vexpress_spc_cpufreq
driver is built as a module.
Since ve_spc_clk_init is built-in device initcall, we should be able to
use the same topology_core_cpumask to set the opp sharing cpumask via
dev_pm_opp_set_sharing_cpus and use the same later in the driver via
dev_pm_opp_get_sharing_cpus.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Roese [Tue, 5 Nov 2019 13:04:56 +0000 (14:04 +0100)]
ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing
[ Upstream commit
0aeb1f2b74f3402e9cdb7c0b8e2c369c9767301e ]
Without this "jedec,spi-nor" compatible property, probing of the SPI NOR
does not work on the NXP i.MX6ULL EVK. Fix this by adding this
compatible property to the DT.
Fixes:
7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration")
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arvind Sankar [Fri, 6 Dec 2019 16:55:40 +0000 (16:55 +0000)]
efi/gop: Fix memory leak in __gop_query32/64()
[ Upstream commit
ff397be685e410a59c34b21ce0c55d4daa466bb7 ]
efi_graphics_output_protocol::query_mode() returns info in
callee-allocated memory which must be freed by the caller, which
we aren't doing.
We don't actually need to call query_mode() in order to obtain the
info for the current graphics mode, which is already there in
gop->mode->info, so just access it directly in the setup_gop32/64()
functions.
Also nothing uses the size of the info structure, so don't update the
passed-in size (which is the size of the gop_handle table in bytes)
unnecessarily.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arvind Sankar [Fri, 6 Dec 2019 16:55:39 +0000 (16:55 +0000)]
efi/gop: Return EFI_SUCCESS if a usable GOP was found
[ Upstream commit
dbd89c303b4420f6cdb689fd398349fc83b059dd ]
If we've found a usable instance of the Graphics Output Protocol
(GOP) with a framebuffer, it is possible that one of the later EFI
calls fails while checking if any support console output. In this
case status may be an EFI error code even though we found a usable
GOP.
Fix this by explicitly return EFI_SUCCESS if a usable GOP has been
located.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arvind Sankar [Fri, 6 Dec 2019 16:55:38 +0000 (16:55 +0000)]
efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs
[ Upstream commit
6fc3cec30dfeee7d3c5db8154016aff9d65503c5 ]
If we don't find a usable instance of the Graphics Output Protocol
(GOP) because none of them have a framebuffer (i.e. they were all
PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return
EFI_SUCCESS even though we didn't find a usable GOP.
Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are
found, allowing the caller to probe for UGA instead.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191206165542.31469-3-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Tue, 3 Dec 2019 22:14:42 +0000 (23:14 +0100)]
ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89
[ Upstream commit
7eccc05c7101f34cc36afe9405d15de6d4099fb4 ]
When the Teclast X89 quirk was added we did not have jack-detection
support yet.
Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Young [Wed, 4 Dec 2019 07:52:33 +0000 (15:52 +0800)]
x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage
[ Upstream commit
af164898482817a1d487964b68f3c21bae7a1beb ]
Michael Weiser reported that he got this error during a kexec rebooting:
esrt: Unsupported ESRT version
2904149718861218184.
The ESRT memory stays in EFI boot services data, and it was reserved
in kernel via efi_mem_reserve(). The initial purpose of the reservation
is to reuse the EFI boot services data across kexec reboot. For example
the BGRT image data and some ESRT memory like Michael reported.
But although the memory is reserved it is not updated in the X86 E820 table,
and kexec_file_load() iterates system RAM in the IO resource list to find places
for kernel, initramfs and other stuff. In Michael's case the kexec loaded
initramfs overwrote the ESRT memory and then the failure happened.
Since kexec_file_load() depends on the E820 table being updated, just fix this
by updating the reserved EFI boot services memory as reserved type in E820.
Originally any memory descriptors with EFI_MEMORY_RUNTIME attribute are
bypassed in the reservation code path because they are assumed as reserved.
But the reservation is still needed for multiple kexec reboots,
and it is the only possible case we come here thus just drop the code
chunk, then everything works without side effects.
On my machine the ESRT memory sits in an EFI runtime data range, it does
not trigger the problem, but I successfully tested with BGRT instead.
both kexec_load() and kexec_file_load() work and kdump works as well.
[ mingo: Edited the changelog. ]
Reported-by: Michael Weiser <michael@weiser.dinsnail.net>
Tested-by: Michael Weiser <michael@weiser.dinsnail.net>
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kexec@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204075233.GA10520@dhcp-128-65.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudip Mukherjee [Fri, 15 Nov 2019 11:36:09 +0000 (11:36 +0000)]
libtraceevent: Fix lib installation with O=
[ Upstream commit
587db8ebdac2c5eb3a8851e16b26f2e2711ab797 ]
When we use 'O=' with make to build libtraceevent in a separate folder
it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the
error:
INSTALL /home/sudip/linux/obj-trace/libtraceevent.a
INSTALL /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0
cp: cannot stat 'libtraceevent.a': No such file or directory
Makefile:225: recipe for target 'install_lib' failed
make: *** [install_lib] Error 1
I used the command:
make O=../../../obj-trace DESTDIR=~/test prefix==/usr install
It turns out libtraceevent Makefile, even though it builds in a separate
folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its
source folder.
So, add the 'OUTPUT' prefix to the source path so that 'make' looks for
the files in the correct place.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
qize wang [Fri, 29 Nov 2019 10:10:54 +0000 (18:10 +0800)]
mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame()
[ Upstream commit
1e58252e334dc3f3756f424a157d1b7484464c40 ]
mwifiex_process_tdls_action_frame() without checking
the incoming tdls infomation element's vality before use it,
this may cause multi heap buffer overflows.
Fix them by putting vality check before use it.
IE is TLV struct, but ht_cap and ht_oper aren’t TLV struct.
the origin marvell driver code is wrong:
memcpy(&sta_ptr->tdls_cap.ht_oper, pos,....
memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,...
Fix the bug by changing pos(the address of IE) to
pos+2 ( the address of IE value ).
Signed-off-by: qize wang <wangqize888888888@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Westphal [Fri, 15 Nov 2019 11:39:23 +0000 (12:39 +0100)]
netfilter: ctnetlink: netns exit must wait for callbacks
[ Upstream commit
18a110b022a5c02e7dc9f6109d0bd93e58ac6ebb ]
Curtis Taylor and Jon Maxwell reported and debugged a crash on 3.10
based kernel.
Crash occurs in ctnetlink_conntrack_events because net->nfnl socket is
NULL. The nfnl socket was set to NULL by netns destruction running on
another cpu.
The exiting network namespace calls the relevant destructors in the
following order:
1. ctnetlink_net_exit_batch
This nulls out the event callback pointer in struct netns.
2. nfnetlink_net_exit_batch
This nulls net->nfnl socket and frees it.
3. nf_conntrack_cleanup_net_list
This removes all remaining conntrack entries.
This is order is correct. The only explanation for the crash so ar is:
cpu1: conntrack is dying, eviction occurs:
-> nf_ct_delete()
-> nf_conntrack_event_report \
-> nf_conntrack_eventmask_report
-> notify->fcn() (== ctnetlink_conntrack_events).
cpu1: a. fetches rcu protected pointer to obtain ctnetlink event callback.
b. gets interrupted.
cpu2: runs netns exit handlers:
a runs ctnetlink destructor, event cb pointer set to NULL.
b runs nfnetlink destructor, nfnl socket is closed and set to NULL.
cpu1: c. resumes and trips over NULL net->nfnl.
Problem appears to be that ctnetlink_net_exit_batch only prevents future
callers of nf_conntrack_eventmask_report() from obtaining the callback.
It doesn't wait of other cpus that might have already obtained the
callbacks address.
I don't see anything in upstream kernels that would prevent similar
crash: We need to wait for all cpus to have exited the event callback.
Fixes:
9592a5c01e79dbc59eb56fa ("netfilter: ctnetlink: netns support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marco Elver [Wed, 20 Nov 2019 15:57:15 +0000 (16:57 +0100)]
locking/spinlock/debug: Fix various data races
[ Upstream commit
1a365e822372ba24c9da0822bc583894f6f3d821 ]
This fixes various data races in spinlock_debug. By testing with KCSAN,
it is observable that the console gets spammed with data races reports,
suggesting these are extremely frequent.
Example data race report:
read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2:
debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline]
do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112
__raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline]
_raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:338 [inline]
get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873
get_partial_node mm/slub.c:1870 [inline]
<snip>
write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3:
debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline]
do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline]
_raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191
spin_unlock_irqrestore include/linux/spinlock.h:393 [inline]
free_debug_processing+0x1b3/0x210 mm/slub.c:1214
__slab_free+0x292/0x400 mm/slub.c:2864
<snip>
As a side-effect, with KCSAN, this eventually locks up the console, most
likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug ->
KCSAN detects data race -> kcsan_print_report() -> printk lock ->
deadlock.
This fix will 1) avoid the data races, and 2) allow using lock debugging
together with KCSAN.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tzung-Bi Shih [Fri, 22 Nov 2019 07:31:14 +0000 (15:31 +0800)]
ASoC: max98090: fix possible race conditions
[ Upstream commit
45dfbf56975994822cce00b7475732a49f8aefed ]
max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:
Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.
max98090_interrupt max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
restart max98090 codec
receive ULK INT
assert ULK == 0
schedule max98090_pll_work (1).
In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.
max98090_interrupt max98090_pll_work max98090 codec
----------------------------------------------------------------------
ULK = 1
receive ULK INT
read 0x01
ULK = 0 (clear on read)
schedule max98090_pll_work
restart max98090 codec
ULK = 1
receive ULK INT
read 0x01
ULK = 0 (clear on read)
read 0x01
assert ULK == 0 (2).
In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register. max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.
There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.
Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously. Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.
Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler. However, it could only punish the jack detection by extra
10~12 msec.
Adopts option B which is the better solution overall.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Sun, 24 Nov 2019 14:58:35 +0000 (22:58 +0800)]
regulator: fix use after free issue
[ Upstream commit
4affd79a125ac91e6a53be843ea3960a8fc00cbb ]
This is caused by dereferencing 'rdev' after put_device() in
the _regulator_get()/_regulator_put() functions.
This patch just moves the put_device() down a bit to avoid the
issue.
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191124145835.25999-1-wenyang@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Borkmann [Mon, 6 Jan 2020 21:51:57 +0000 (22:51 +0100)]
bpf: Fix passing modified ctx to ld/abs/ind instruction
commit
6d4f151acf9a4f6fab09b615f246c717ddedcf0c upstream.
Anatoly has been fuzzing with kBdysch harness and reported a KASAN
slab oob in one of the outcomes:
[...]
[ 77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130
[ 77.360463] Read of size 4 at addr
ffff8880679bac68 by task bpf/406
[ 77.361119]
[ 77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215eba #1
[ 77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 77.362984] Call Trace:
[ 77.363249] dump_stack+0x97/0xe0
[ 77.363603] print_address_description.constprop.0+0x1d/0x220
[ 77.364251] ? bpf_skb_load_helper_8_no_cache+0x71/0x130
[ 77.365030] ? bpf_skb_load_helper_8_no_cache+0x71/0x130
[ 77.365860] __kasan_report.cold+0x37/0x7b
[ 77.366365] ? bpf_skb_load_helper_8_no_cache+0x71/0x130
[ 77.366940] kasan_report+0xe/0x20
[ 77.367295] bpf_skb_load_helper_8_no_cache+0x71/0x130
[ 77.367821] ? bpf_skb_load_helper_8+0xf0/0xf0
[ 77.368278] ? mark_lock+0xa3/0x9b0
[ 77.368641] ? kvm_sched_clock_read+0x14/0x30
[ 77.369096] ? sched_clock+0x5/0x10
[ 77.369460] ? sched_clock_cpu+0x18/0x110
[ 77.369876] ? bpf_skb_load_helper_8+0xf0/0xf0
[ 77.370330] ___bpf_prog_run+0x16c0/0x28f0
[ 77.370755] __bpf_prog_run32+0x83/0xc0
[ 77.371153] ? __bpf_prog_run64+0xc0/0xc0
[ 77.371568] ? match_held_lock+0x1b/0x230
[ 77.371984] ? rcu_read_lock_held+0xa1/0xb0
[ 77.372416] ? rcu_is_watching+0x34/0x50
[ 77.372826] sk_filter_trim_cap+0x17c/0x4d0
[ 77.373259] ? sock_kzfree_s+0x40/0x40
[ 77.373648] ? __get_filter+0x150/0x150
[ 77.374059] ? skb_copy_datagram_from_iter+0x80/0x280
[ 77.374581] ? do_raw_spin_unlock+0xa5/0x140
[ 77.375025] unix_dgram_sendmsg+0x33a/0xa70
[ 77.375459] ? do_raw_spin_lock+0x1d0/0x1d0
[ 77.375893] ? unix_peer_get+0xa0/0xa0
[ 77.376287] ? __fget_light+0xa4/0xf0
[ 77.376670] __sys_sendto+0x265/0x280
[ 77.377056] ? __ia32_sys_getpeername+0x50/0x50
[ 77.377523] ? lock_downgrade+0x350/0x350
[ 77.377940] ? __sys_setsockopt+0x2a6/0x2c0
[ 77.378374] ? sock_read_iter+0x240/0x240
[ 77.378789] ? __sys_socketpair+0x22a/0x300
[ 77.379221] ? __ia32_sys_socket+0x50/0x50
[ 77.379649] ? mark_held_locks+0x1d/0x90
[ 77.380059] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 77.380536] __x64_sys_sendto+0x74/0x90
[ 77.380938] do_syscall_64+0x68/0x2a0
[ 77.381324] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 77.381878] RIP: 0033:0x44c070
[...]
After further debugging, turns out while in case of other helper functions
we disallow passing modified ctx, the special case of ld/abs/ind instruction
which has similar semantics (except r6 being the ctx argument) is missing
such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache()
and others are expecting skb fields in original position, hence, add
check_ctx_reg() to reject any modified ctx. Issue was first introduced back
in
f1174f77b50c ("bpf/verifier: rework value tracking").
Fixes:
f1174f77b50c ("bpf/verifier: rework value tracking")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Konovalov [Mon, 21 Oct 2019 14:20:58 +0000 (16:20 +0200)]
USB: dummy-hcd: increase max number of devices to 32
commit
8442b02bf3c6770e0d7e7ea17be36c30e95987b6 upstream.
When fuzzing the USB subsystem with syzkaller, we currently use 8 testing
processes within one VM. To isolate testing processes from one another it
is desirable to assign a dedicated USB bus to each of those, which means
we need at least 8 Dummy UDC/HCD devices.
This patch increases the maximum number of Dummy UDC/HCD devices to 32
(more than 8 in case we need more of them in the future).
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/665578f904484069bb6100fb20283b22a046ad9b.1571667489.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Konovalov [Mon, 21 Oct 2019 14:20:59 +0000 (16:20 +0200)]
USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein
commit
6dabeb891c001c592645df2f477fed9f5d959987 upstream.
Commit
fea3409112a9 ("USB: add direction bit to urb->transfer_flags") has
added a usb_urb_dir_in() helper function that can be used to determine
the direction of the URB. With that patch USB_DIR_IN control requests with
wLength == 0 are considered out requests by real USB HCDs. This patch
changes dummy-hcd to use the usb_urb_dir_in() helper to match that
behavior.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/4ae9e68ebca02f08a93ac61fe065057c9a01f0a8.1571667489.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log