Niklas Söderlund [Thu, 8 Aug 2019 05:10:58 +0000 (02:10 -0300)]
media: rcar-vin: Report correct image stride
The image stride was adjusted when it was written to hardware and not
when configuring the format. Calculate the correct stride value and
report it to userspace.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Tue, 30 Jul 2019 06:38:17 +0000 (03:38 -0300)]
media: omap_vout: convert to vb2
Convert omap_vout to the vb2 framework. After this change
'v4l2-compliance -s' passes all tests.
As usual, this vb2 conversion is a 'big bang' patch and hard to read.
Tested on a Pandaboard and a Beagle XM board.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Tue, 30 Jul 2019 06:38:16 +0000 (03:38 -0300)]
media: omap_vout: fix various v4l2-compliance failures
This patch fixes the following v4l2-compliance failures:
- FIELD_ANY could be returned, which is not allowed.
- JPEG colorspace was set instead of SRGB.
- No control events.
- Empty bus_info in QUERYCAP.
- Overlay format handling wasn't zeroing bitmap/clips and
didn't return the chromakey correctly.
- G_FBUF didn't fill in many of the v4l2_framebuffer values.
Now also return the base address of the corresponding
framebuffer that this overlays.
- Missing ENUM/G/S_OUTPUT ioctls.
- ROTATE/VFLIP controls were added when the HW didn't support them.
With these changes 'v4l2-compliance' passes all non-streaming tests.
Tested on a Pandaboard and a Beagle XM board.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Mon, 12 Aug 2019 16:22:54 +0000 (13:22 -0300)]
Merge tag 'v5.3-rc4' into patchwork
Linux 5.3-rc4
* tag 'v5.3-rc4': (750 commits)
Linux 5.3-rc4
Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang
ARM: ep93xx: Mark expected switch fall-through
scsi: fas216: Mark expected switch fall-throughs
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
video: fbdev: omapfb_main: Mark expected switch fall-throughs
watchdog: riowd: Mark expected switch fall-through
s390/net: Mark expected switch fall-throughs
crypto: ux500/crypt: Mark expected switch fall-throughs
watchdog: wdt977: Mark expected switch fall-through
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: Mark expected switch fall-throughs
ARM: signal: Mark expected switch fall-through
mfd: omap-usb-host: Mark expected switch fall-throughs
mfd: db8500-prcmu: Mark expected switch fall-throughs
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: alignment: Mark expected switch fall-throughs
ARM: tegra: Mark expected switch fall-through
ARM/hw_breakpoint: Mark expected switch fall-throughs
mm/memremap: Fix reuse of pgmap instances with internal references
...
Hans Verkuil [Tue, 30 Jul 2019 06:17:59 +0000 (03:17 -0300)]
media: mach-omap2/devices.c: set dma mask
The dma_mask and coherent_dma_mask values were never set.
This prevented the media omap_vout driver from loading successfully.
Tested on a Pandaboard and Beagle XM board.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Linus Torvalds [Sun, 11 Aug 2019 20:26:41 +0000 (13:26 -0700)]
Linux 5.3-rc4
Linus Torvalds [Sun, 11 Aug 2019 20:15:10 +0000 (13:15 -0700)]
Merge tag 'dax-fixes-5.3-rc4' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A filesystem-dax and device-dax fix for v5.3.
The filesystem-dax fix is tagged for stable as the implementation has
been mistakenly throwing away all cow pages on any truncate or hole
punch operation as part of the solution to coordinate device-dma vs
truncate to dax pages.
The device-dax change fixes up a regression this cycle from the
introduction of a common 'internal per-cpu-ref' implementation.
Summary:
- Fix dax_layout_busy_page() to not discard private cow pages of
fs/dax private mappings.
- Update the memremap_pages core to properly cleanup on behalf of
internal reference-count users like device-dax"
* tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm/memremap: Fix reuse of pgmap instances with internal references
dax: dax_layout_busy_page() should not unmap cow pages
Linus Torvalds [Sun, 11 Aug 2019 17:13:53 +0000 (10:13 -0700)]
Merge tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb
Pull NTB fix from Jon Mason:
"Bug fix for NTB MSI kernel compile warning"
* tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb:
NTB/msi: remove incorrect MODULE defines
Linus Torvalds [Sat, 10 Aug 2019 23:31:47 +0000 (16:31 -0700)]
Merge tag 'riscv/for-v5.3-rc4' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"A few minor RISC-V updates for v5.3-rc4:
- Remove __udivdi3() from the 32-bit Linux port, converting the only
upstream user to use do_div(), per Linux policy
- Convert the RISC-V standard clocksource away from per-cpu data
structures, since only one is used by Linux, even on a multi-CPU
system
- A set of DT binding updates that remove an obsolete text binding in
favor of a YAML binding, fix a bogus compatible string in the
schema (thus fixing a "make dtbs_check" warning), and clarifies the
future values expected in one of the RISC-V CPU properties"
* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
dt-bindings: riscv: remove obsolete cpus.txt
RISC-V: Remove udivdi3
riscv: delay: use do_div() instead of __udivdi3()
dt-bindings: Update the riscv,isa string description
RISC-V: Remove per cpu clocksource
Linus Torvalds [Sat, 10 Aug 2019 23:24:03 +0000 (16:24 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Don't reset the carefully adjusted build flags for the purgatory
and remove the unwanted flags instead. The 'reset all' approach led
to build fails under certain circumstances.
- Unbreak CLANG build of the purgatory by avoiding the builtin
memcpy/memset implementations.
- Address missing prototype warnings by including the proper header
- Fix yet more fall-through issues"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib/cpu: Address missing prototypes warning
x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS
x86/purgatory: Do not use __builtin_memcpy and __builtin_memset
x86: mtrr: cyrix: Mark expected switch fall-through
x86/ptrace: Mark expected switch fall-through
Linus Torvalds [Sat, 10 Aug 2019 23:19:02 +0000 (16:19 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
"Perf tooling fixes all over the place:
- Fix the selection of the main thread COMM in db-export
- Fix the disassemmbly display for BPF in annotate
- Fix cpumap mask setup in perf ftrace when only one CPU is present
- Add the missing 'cpu_clk_unhalted.core' event
- Fix CPU 0 bindings in NUMA benchmarks
- Fix the module size calculations for s390
- Handle the gap between kernel end and module start on s390
correctly
- Build and typo fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf pmu-events: Fix missing "cpu_clk_unhalted.core" event
perf annotate: Fix s390 gap between kernel end and module start
perf record: Fix module size on s390
perf tools: Fix include paths in ui directory
perf tools: Fix a typo in a variable name in the Documentation Makefile
perf cpumap: Fix writing to illegal memory in handling cpumap mask
perf ftrace: Fix failure to set cpumask when only one cpu is present
perf db-export: Fix thread__exec_comm()
perf annotate: Fix printing of unaugmented disassembled instructions from BPF
perf bench numa: Fix cpu0 binding
Linus Torvalds [Sat, 10 Aug 2019 22:48:02 +0000 (15:48 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Three fixlets for the scheduler:
- Avoid double bandwidth accounting in the push & pull code
- Use a sane FIFO priority for the Pressure Stall Information (PSI)
thread.
- Avoid permission checks when setting the scheduler params for the
PSI thread"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: Do not require setsched permission from the trigger creator
sched/psi: Reduce psimon FIFO priority
sched/deadline: Fix double accounting of rq/running bw in push & pull
Linus Torvalds [Sat, 10 Aug 2019 22:46:25 +0000 (15:46 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A small fix for the affinity spreading code.
It failed to handle situations where a single vector was requested
either due to only one CPU being available or vector exhaustion
causing only a single interrupt to be granted.
The fix is to simply remove the requirement in the affinity spreading
code for more than one interrupt being available"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Create affinity mask for single vector
Linus Torvalds [Sat, 10 Aug 2019 22:44:09 +0000 (15:44 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull objtool warning fix from Thomas Gleixner:
"The recent objtool fixes/enhancements unearthed a unbalanced CLAC in
the i915 driver.
Chris asked me to pick the fix up and route it through"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
drm/i915: Remove redundant user_access_end() from __copy_from_user() error path
Linus Torvalds [Sat, 10 Aug 2019 22:41:15 +0000 (15:41 -0700)]
Merge tag 'gfs2-v5.3-rc3.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
"Fix incorrect lseek / fiemap results"
* tag 'gfs2-v5.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_walk_metadata fix
Joe Perches [Mon, 5 Aug 2019 22:11:15 +0000 (15:11 -0700)]
Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang
A compilation -Wimplicit-fallthrough warning was enabled by commit
a035d552a93b ("Makefile: Globally enable fall-through warning")
Even though clang 10.0.0 does not currently support this warning without
a patch, clang currently does not support a value for this option.
Link: https://bugs.llvm.org/show_bug.cgi?id=39382
The gcc default for this warning is 3 so removing the =3 has no effect
for gcc and enables the warning for patched versions of clang.
Also remove the =3 from an existing use in a parisc Makefile:
arch/parisc/math-emu/Makefile
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 10 Aug 2019 19:24:20 +0000 (12:24 -0700)]
Merge tag 'char-misc-5.3-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes Greg KH:
"Here are some small char/misc driver fixes for 5.3-rc4.
Two of these are for the habanalabs driver for issues found when
running on a big-endian system (are they still alive?) The others are
tiny fixes reported by people, and a MAINTAINERS update about the
location of the fpga development tree.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
MAINTAINERS: Move linux-fpga tree to new location
nvmem: Use the same permissions for eeprom as for nvmem
habanalabs: fix host memory polling in BE architecture
habanalabs: fix F/W download in BE architecture
Linus Torvalds [Sat, 10 Aug 2019 19:20:02 +0000 (12:20 -0700)]
Merge tag 'driver-core-5.3-rc4' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small fixes for some driver core issues that have been
reported. There is also a kernfs "fix" here, which was then reverted
because it was found to cause problems in linux-next.
The driver core fixes both resolve reported issues, one with gpioint
stuff that showed up in 5.3-rc1, and the other finally (and hopefully)
resolves a very long standing race when removing glue directories.
It's nice to get that issue finally resolved and the developers
involved should be applauded for the persistence it took to get this
patch finally accepted.
All of these have been in linux-next for a while with no reported
issues. Well, the one reported issue, hence the revert :)"
* tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "kernfs: fix memleak in kernel_ops_readdir()"
kernfs: fix memleak in kernel_ops_readdir()
driver core: Fix use-after-free and double free on glue directory
driver core: platform: return -ENXIO for missing GpioInt
Linus Torvalds [Sat, 10 Aug 2019 19:17:12 +0000 (12:17 -0700)]
Merge tag 'tty-5.3-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single tty kgdb fix for 5.3-rc4.
It fixes an annoying log message that has caused kdb to become
useless. It's another fallout from commit
ddde3c18b700 ("vt: More
locking checks") which tries to enforce locking checks more strictly
in the tty layer, unfortunatly when kdb is stopped, there's no need
for locks :)
This patch has been linux-next for a while with no reported issues"
* tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
kgdboc: disable the console lock when in kgdb
Linus Torvalds [Sat, 10 Aug 2019 19:13:39 +0000 (12:13 -0700)]
Merge tag 'staging-5.3-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging / IIO driver fixes from Greg KH:
"Here are some small staging and IIO driver fixes for 5.3-rc4.
Nothing major, just resolutions for a number of small reported issues,
full details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: gyroadc: fix uninitialized return code
docs: generic-counter.rst: fix broken references for ABI file
staging: android: ion: Bail out upon SIGKILL when allocating memory.
Staging: fbtft: Fix GPIO handling
staging: unisys: visornic: Update the description of 'poll_for_irq()'
staging: wilc1000: flush the workqueue before deinit the host
staging: gasket: apex: fix copy-paste typo
Staging: fbtft: Fix reset assertion when using gpio descriptor
Staging: fbtft: Fix probing of gpio descriptor
iio: imu: mpu6050: add missing available scan masks
iio: cros_ec_accel_legacy: Fix incorrect channel setting
IIO: Ingenic JZ47xx: Set clock divider on probe
iio: adc: max9611: Fix misuse of GENMASK macro
Linus Torvalds [Sat, 10 Aug 2019 18:59:57 +0000 (11:59 -0700)]
Merge tag 'usb-5.3-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.3-rc4.
The "biggest" one here is moving code from one file to another in
order to fix a long-standing race condition with the creation of sysfs
files for USB devices. Turns out that there are now userspace tools
out there that are hitting this long-known bug, so it's time to fix
them. Thankfully the tool-maker in this case fixed the issue :)
The other patches in here are all fixes for reported issues. Now that
syzbot knows how to fuzz USB drivers better, and is starting to now
fuzz the userspace facing side of them at the same time, there will be
more and more small fixes like these coming, which is a good thing.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: setup authorized_default attributes using usb_bus_notify
usb: iowarrior: fix deadlock on disconnect
Revert "USB: rio500: simplify locking"
usb: usbfs: fix double-free of usb memory upon submiturb error
usb: yurex: Fix use-after-free in yurex_delete
usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests
xhci: Fix NULL pointer dereference at endpoint zero reset.
usb: host: xhci-rcar: Fix timeout in xhci_suspend()
usb: typec: ucsi: ccg: Fix uninitilized symbol error
usb: typec: tcpm: remove tcpm dir if no children
usb: typec: tcpm: free log buf memory when remove debug file
usb: typec: tcpm: Add NULL check before dereferencing config
Linus Torvalds [Sat, 10 Aug 2019 17:21:25 +0000 (10:21 -0700)]
Merge tag 'pinctrl-v5.3-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Delay acquisition of regmaps in the Aspeed G5 driver.
- Make a symbol static to reduce compiler noise.
* tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: aspeed: Make aspeed_pinmux_ips static
pinctrl: aspeed-g5: Delay acquisition of regmaps
Linus Torvalds [Sat, 10 Aug 2019 17:17:19 +0000 (10:17 -0700)]
Merge tag 'powerpc-5.3-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix, a revert of a commit that was meant to be a minor
improvement to some inline asm, but ended up having no real benefit
with GCC and broke booting 32-bit machines when using Clang.
Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick
Desaulniers, Segher Boessenkool"
* tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: slightly improve cache helpers"
Linus Torvalds [Sat, 10 Aug 2019 17:10:33 +0000 (10:10 -0700)]
Merge tag 'Wimplicit-fallthrough-5.3-rc4' of git://git./linux/kernel/git/gustavoars/linux
Pull fall-through fixes from Gustavo A. R. Silva:
"Mark more switch cases where we are expecting to fall through, fixing
fall-through warnings in arm, sparc64, mips, i386 and s390"
* tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
ARM: ep93xx: Mark expected switch fall-through
scsi: fas216: Mark expected switch fall-throughs
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
video: fbdev: omapfb_main: Mark expected switch fall-throughs
watchdog: riowd: Mark expected switch fall-through
s390/net: Mark expected switch fall-throughs
crypto: ux500/crypt: Mark expected switch fall-throughs
watchdog: wdt977: Mark expected switch fall-through
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: Mark expected switch fall-throughs
ARM: signal: Mark expected switch fall-through
mfd: omap-usb-host: Mark expected switch fall-throughs
mfd: db8500-prcmu: Mark expected switch fall-throughs
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: alignment: Mark expected switch fall-throughs
ARM: tegra: Mark expected switch fall-through
ARM/hw_breakpoint: Mark expected switch fall-throughs
Linus Torvalds [Sat, 10 Aug 2019 03:31:04 +0000 (20:31 -0700)]
Merge tag 'kbuild-fixes-v5.3-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- revive single target %.ko
- do not create built-in.a where it is unneeded
- do not create modules.order where it is unneeded
- show a warning if subdir-y/m is used to visit a module Makefile
* tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: show hint if subdir-y/m is used to visit module Makefile
kbuild: generate modules.order only in directories visited by obj-y/m
kbuild: fix false-positive need-builtin calculation
kbuild: revive single target %.ko
Gustavo A. R. Silva [Thu, 8 Aug 2019 02:34:48 +0000 (21:34 -0500)]
ARM: ep93xx: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: arm-ep93xx_defconfig arm):
arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do':
arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may
fall through [-Wimplicit-fallthrough=]
memset(crunch_state, 0, sizeof(*crunch_state));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-ep93xx/crunch.c:53:2: note: here
case THREAD_NOTIFY_EXIT:
^~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Tue, 6 Aug 2019 08:26:15 +0000 (03:26 -0500)]
scsi: fas216: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: rpc_defconfig arm):
drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’:
drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) {
^
drivers/scsi/arm/fas216.c:919:2: note: here
default: /* huh? */
^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_kick’:
drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_allocate_tag(info, SCpnt);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1960:2: note: here
case TYPE_OTHER:
^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’:
drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_stoptransfer(info);
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1414:2: note: here
case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */
^~~~
drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_stoptransfer(info);
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1425:2: note: here
case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */
^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’:
drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
^
drivers/scsi/arm/fas216.c:1579:2: note: here
default:
^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’:
drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
info->scsi.phase = PHASE_MSGOUT_EXPECT;
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:607:2: note: here
case async:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 5 Aug 2019 19:47:35 +0000 (14:47 -0500)]
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: db1xxx_defconfig mips):
drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Fri, 2 Aug 2019 19:10:29 +0000 (14:10 -0500)]
video: fbdev: omapfb_main: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: omap1_defconfig arm):
drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Tue, 30 Jul 2019 01:45:29 +0000 (20:45 -0500)]
watchdog: riowd: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: sparc64):
drivers/watchdog/riowd.c: In function ‘riowd_ioctl’:
drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
riowd_writereg(p, riowd_timeout, WDTO_INDEX);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/watchdog/riowd.c:139:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Tue, 30 Jul 2019 00:13:54 +0000 (19:13 -0500)]
s390/net: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: s390):
drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’:
drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->changed_side == 1) {
^
drivers/s390/net/ctcm_fsms.c:1707:2: note: here
case MPCG_STATE_XID0IOWAIX:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’:
drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (callback)
^
drivers/s390/net/ctcm_mpc.c:360:2: note: here
case MPCG_STATE_XID0IOWAIT:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’:
drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) &&
^
drivers/s390/net/ctcm_mpc.c:1472:2: note: here
default:
^~~~~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’:
drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->estconnfunc) {
^
drivers/s390/net/ctcm_mpc.c:2092:2: note: here
case MPCG_STATE_FLOWC:
^~~~
drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’:
drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (IS_OSN(card)) {
^
drivers/s390/net/qeth_l2_main.c:337:3: note: here
default:
^~~~~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 22:35:45 +0000 (17:35 -0500)]
crypto: ux500/crypt: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’:
drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_4_r = readl_relaxed(&src_reg->key_4_r);
drivers/crypto/ux500/cryp/cryp.c:318:2: note: here
case CRYP_KEY_SIZE_192:
^~~~
drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_3_r = readl_relaxed(&src_reg->key_3_r);
drivers/crypto/ux500/cryp/cryp.c:322:2: note: here
case CRYP_KEY_SIZE_128:
^~~~
drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_2_r = readl_relaxed(&src_reg->key_2_r);
drivers/crypto/ux500/cryp/cryp.c:326:2: note: here
default:
^~~~~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_4_r, ®->key_4_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:365:2: note: here
case CRYP_KEY_SIZE_192:
^~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_3_r, ®->key_3_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:369:2: note: here
case CRYP_KEY_SIZE_128:
^~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_2_r, ®->key_2_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:373:2: note: here
default:
^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 22:30:57 +0000 (17:30 -0500)]
watchdog: wdt977: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’:
LD [M] drivers/media/platform/vicodec/vicodec.o
drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
wdt977_keepalive();
^~~~~~~~~~~~~~~~~~
drivers/watchdog/wdt977.c:403:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 20:03:49 +0000 (15:03 -0500)]
watchdog: scx200_wdt: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: i386):
drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’:
drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
scx200_wdt_ping();
^~~~~~~~~~~~~~~~~
drivers/watchdog/scx200_wdt.c:189:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 15:08:05 +0000 (10:08 -0500)]
watchdog: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/watchdog/ar7_wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 237:3
drivers/watchdog/pcwd.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 653:3
drivers/watchdog/sb_wdog.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 204:3
drivers/watchdog/wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 391:3
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 00:11:11 +0000 (19:11 -0500)]
ARM: signal: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/kernel/signal.c: In function 'do_signal':
arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
restart -= 2;
~~~~~~~~^~~~
arch/arm/kernel/signal.c:599:3: note: here
case -ERESTARTNOHAND:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:57:05 +0000 (18:57 -0500)]
mfd: omap-usb-host: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume':
drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i])) {
^
drivers/mfd/omap-usb-host.c:313:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend':
drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i]))
^
drivers/mfd/omap-usb-host.c:349:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:53:15 +0000 (18:53 -0500)]
mfd: db8500-prcmu: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate':
drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1593:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI_2:
^~~~
drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1595:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:19:41 +0000 (18:19 -0500)]
ARM: OMAP: dma: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode':
arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:393:2: note: here
case OMAP_DMA_DATA_BURST_16:
^~~~
arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:402:2: note: here
default:
^~~~~~~
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode':
arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:481:2: note: here
default:
^~~~~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:17:18 +0000 (18:17 -0500)]
ARM: alignment: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/mm/alignment.c: In function 'thumb2arm':
arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((tinstr & (3 << 9)) == 0x0400) {
^
arch/arm/mm/alignment.c:700:2: note: here
default:
^~~~~~~
arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler':
arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
poffset->un = (tinst2 & 0xff) << 2;
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mm/alignment.c:754:2: note: here
case 0xe940:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:10:21 +0000 (18:10 -0500)]
ARM: tegra: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable':
arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
tegra_cpu_reset_handler_set(reset_address);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-tegra/reset.c:74:2: note: here
case 0:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:02:41 +0000 (18:02 -0500)]
ARM/hw_breakpoint: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse':
arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
^
arch/arm/kernel/hw_breakpoint.c:611:2: note: here
case 3:
^~~~
arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
^
arch/arm/kernel/hw_breakpoint.c:615:2: note: here
default:
^~~~~~~
arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info':
arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE)
^
arch/arm/kernel/hw_breakpoint.c:547:2: note: here
default:
^~~~~~~
In file included from include/linux/kernel.h:11,
from include/linux/list.h:9,
from include/linux/preempt.h:11,
from include/linux/hardirq.h:5,
from arch/arm/kernel/hw_breakpoint.c:16:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending':
include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely'
unlikely(__ret_warn_on); \
^~~~~~~~
arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN'
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
^~~~
arch/arm/kernel/hw_breakpoint.c:864:2: note: here
case ARM_ENTRY_SYNC_WATCHPOINT:
^~~~
arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore':
arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (oslsr & ARM_OSLSR_OSLM0)
^
arch/arm/kernel/hw_breakpoint.c:912:2: note: here
default:
^~~~~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Linus Torvalds [Fri, 9 Aug 2019 22:46:29 +0000 (15:46 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes (arm and x86) and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Adding config fragments
KVM: selftests: Update gitignore file for latest changes
kvm: remove unnecessary PageReserved check
KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
KVM: arm: Don't write junk to CP15 registers on reset
KVM: arm64: Don't write junk to sysregs on reset
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block
x86: kvm: remove useless calls to kvm_para_available
KVM: no need to check return value of debugfs_create functions
KVM: remove kvm_arch_has_vcpu_debugfs()
KVM: Fix leak vCPU's VMCS value into other pCPU
KVM: Check preempted_in_kernel for involuntary preemption
KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire
arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC
KVM: arm: vgic-v3: Mark expected switch fall-through
arm64: KVM: regmap: Fix unexpected switch fall-through
KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
Linus Torvalds [Fri, 9 Aug 2019 22:31:19 +0000 (15:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- newer systems with Elan touchpads will be switched over to SMBus
- HP Spectre X360 will be using SMbus/RMI4
- checks for invalid USB descriptors in kbtab and iforce
- build fixes for applespi driver (misconfigs)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: iforce - add sanity checks
Input: applespi - use struct_size() helper
Input: kbtab - sanity check for endpoint type
Input: usbtouchscreen - initialize PM mutex before using it
Input: applespi - add dependency on LEDS_CLASS
Input: synaptics - enable RMI mode for HP Spectre X360
Input: elantech - annotate fall-through case in elantech_use_host_notify()
Input: elantech - enable SMBus on new (2018+) systems
Input: applespi - fix trivial typo in struct description
Input: applespi - select CRC16 module
Input: applespi - fix warnings detected by sparse
Dan Williams [Thu, 8 Aug 2019 21:43:49 +0000 (14:43 -0700)]
mm/memremap: Fix reuse of pgmap instances with internal references
Currently, attempts to shutdown and re-enable a device-dax instance
trigger:
Missing reference count teardown definition
WARNING: CPU: 37 PID: 1608 at mm/memremap.c:211 devm_memremap_pages+0x234/0x850
[..]
RIP: 0010:devm_memremap_pages+0x234/0x850
[..]
Call Trace:
dev_dax_probe+0x66/0x190 [device_dax]
really_probe+0xef/0x390
driver_probe_device+0xb4/0x100
device_driver_attach+0x4f/0x60
Given that the setup path initializes pgmap->ref, arrange for it to be
also torn down so devm_memremap_pages() is ready to be called again and
not be mistaken for the 3rd-party per-cpu-ref case.
Fixes:
24917f6b1041 ("memremap: provide an optional internal refcount in struct dev_pagemap")
Reported-by: Fan Du <fan.du@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/156530042781.2068700.8733813683117819799.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Josh Poimboeuf [Thu, 25 Jul 2019 20:29:57 +0000 (15:29 -0500)]
drm/i915: Remove redundant user_access_end() from __copy_from_user() error path
Objtool reports:
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x36: redundant UACCESS disable
__copy_from_user() already does both STAC and CLAC, so the
user_access_end() in its error path adds an extra unnecessary CLAC.
Fixes:
0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://github.com/ClangBuiltLinux/linux/issues/617
Link: https://lkml.kernel.org/r/51a4155c5bc2ca847a9cbe85c1c11918bb193141.1564086017.git.jpoimboe@redhat.com
Masahiro Yamada [Thu, 8 Aug 2019 11:21:11 +0000 (20:21 +0900)]
kbuild: show hint if subdir-y/m is used to visit module Makefile
Since commit
ff9b45c55b26 ("kbuild: modpost: read modules.order instead
of $(MODVERDIR)/*.mod"), a module is no longer built in the following
pattern:
[Makefile]
subdir-y := some-module
[some-module/Makefile]
obj-m := some-module.o
You cannot write Makefile this way in upstream because modules.order is
not correctly generated. subdir-y is used to descend to a sub-directory
that builds tools, device trees, etc.
For external modules, the modules order does not matter. So, the
Makefile above was known to work.
I believe the Makefile should be re-written as follows:
[Makefile]
obj-m := some-module/
[some-module/Makefile]
obj-m := some-module.o
However, people will have no idea if their Makefile suddenly stops
working. In fact, I received questions from multiple people.
Show a warning for a while if obj-m is specified in a Makefile visited
by subdir-y or subdir-m.
I touched the %/ rule to avoid false-positive warnings for the single
target.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Tom Stonecypher <thomas.edwardx.stonecypher@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Masahiro Yamada [Tue, 6 Aug 2019 10:03:22 +0000 (19:03 +0900)]
kbuild: generate modules.order only in directories visited by obj-y/m
The modules.order files in directories visited by the chain of obj-y
or obj-m are merged to the upper-level ones, and become parts of the
top-level modules.order. On the other hand, there is no need to
generate modules.order in directories visited by subdir-y or subdir-m
since they would become orphan anyway.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 6 Aug 2019 10:03:21 +0000 (19:03 +0900)]
kbuild: fix false-positive need-builtin calculation
The current implementation of need-builtin is false-positive,
for example, in the following Makefile:
obj-m := foo/
obj-y := foo/bar/
..., where foo/built-in.a is not required.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 2 Aug 2019 10:23:58 +0000 (19:23 +0900)]
kbuild: revive single target %.ko
I removed the single target %.ko in commit
ff9b45c55b26 ("kbuild:
modpost: read modules.order instead of $(MODVERDIR)/*.mod") because
the modpost stage does not work reliably. For instance, the module
dependency, modversion, etc. do not work if we lack symbol information
from the other modules.
Yet, some people still want to build only one module in their interest,
and it may be still useful if it is used within those limitations.
Fixes:
ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod")
Reported-by: Don Brace <don.brace@microsemi.com>
Reported-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Linus Torvalds [Fri, 9 Aug 2019 16:35:23 +0000 (09:35 -0700)]
Merge tag 'drm-fixes-2019-08-09' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Usual fixes roundup. Nothing too crazy or serious, one non-released
ioctl is removed in the amdkfd driver.
core:
- mode parser strncpy fix
i915:
- GLK DSI escape clock setting
- HDCP memleak fix
tegra:
- one gpiod/of regression fix
amdgpu:
- fix VCN to handle the latest navi10 firmware
- fix for fan control on navi10
- properly handle SMU metrics table on navi10
- fix a resume regression on Stoney
- kfd revert a GWS ioctl
vmwgfx:
- memory leak fix
rockchip:
- suspend fix"
* tag 'drm-fixes-2019-08-09' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: fix memory leak when too many retries have occurred
Revert "drm/amdkfd: New IOCTL to allocate queue GWS"
Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)"
drm/amdgpu: pin the csb buffer on hw init for gfx v8
drm/rockchip: Suspend DP late
drm/i915: Fix wrong escape clock divisor init for GLK
drm/i915: fix possible memory leak in intel_hdcp_auth_downstream()
drm/modes: Fix unterminated strncpy
drm/amd/powerplay: correct navi10 vcn powergate
drm/amd/powerplay: honor hw limit on fetching metrics data for navi10
drm/amd/powerplay: Allow changing of fan_control in smu_v11_0
drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0
drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commands
drm/tegra: Fix gpiod_get_from_of_node() regression
Linus Torvalds [Fri, 9 Aug 2019 16:31:40 +0000 (09:31 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix bad_pte warning caused by pte_mkdevmap() not setting PTE_SPECIAL"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64
Linus Torvalds [Fri, 9 Aug 2019 16:30:00 +0000 (09:30 -0700)]
Merge tag 's390-5.3-5' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Map vdso also for statically linked binaries like all other
architectures.
- Fix no .bss usage compile-time check to account common objects with
the help of binutils size tool. Top level Makefile change acked-by
Masahiro.
- A fix to make perf happy with _etext symbol type.
- Fix dump_pagetables which is broken since p*d_offset implementation
change to comply with mm/gup.c expectations.
- Revert memory sharing for diag calls in protected virtualization,
since this is not required after all.
- Couple of other minor code cleanups.
* tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vdso: map vdso also for statically linked binaries
s390/build: use size command to perform empty .bss check
kbuild: add OBJSIZE variable for the size tool
s390: put _stext and _etext into .text section
s390/head64: cleanup unused labels
s390/unwind: remove stack recursion warning
s390/setup: adjust start_code of init_mm to _text
s390/mm: fix dump_pagetables top level page table walking
s390/protvirt: avoid memory sharing for diag 308 set/store
Linus Torvalds [Fri, 9 Aug 2019 16:28:18 +0000 (09:28 -0700)]
Merge tag 'for-linus-
20190809' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Revert of a bcache patch that caused an oops for some (Coly)
- ata rb532 unused warning fix (Gustavo)
- AoE kernel crash fix (He)
- Error handling fixup for blkdev_get() (Jan)
- libata read/write translation and SFF PIO fix (me)
- Use after free and error handling fix for O_DIRECT fragments. There's
still a nowait + sync oddity in there, we'll nail that start next
week. If all else fails, I'll queue a revert of the NOWAIT change.
(me)
- Loop GFP_KERNEL -> GFP_NOIO deadlock fix (Mikulas)
- Two BFQ regression fixes that caused crashes (Paolo)
* tag 'for-linus-
20190809' of git://git.kernel.dk/linux-block:
bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()"
loop: set PF_MEMALLOC_NOIO for the worker thread
bdev: Fixup error handling in blkdev_get()
block, bfq: handle NULL return value by bfq_init_rq()
block, bfq: move update of waker and woken list to queue freeing
block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed
block: aoe: Fix kernel crash due to atomic sleep when exiting
libata: add SG safety checks in SFF pio transfers
libata: have ata_scsi_rw_xlat() fail invalid passthrough requests
block: fix O_DIRECT error handling for bio fragments
ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe
Linus Torvalds [Fri, 9 Aug 2019 16:26:47 +0000 (09:26 -0700)]
Merge tag 'mmc-v5.3-rc3' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- cavium: Fix DMA support
- sdhci-sprd: Fix soft reset when runtime resuming"
* tag 'mmc-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: cavium: Add the missing dma unmap when the dma has finished.
mmc: cavium: Set the correct dma max segment size for mmc_host
mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming
Linus Torvalds [Fri, 9 Aug 2019 16:24:49 +0000 (09:24 -0700)]
Merge tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux
Pull fbdev fix from Bartlomiej Zolnierkiewicz:
"fbdev patches will now go to upstream through drm-misc tree for
improved maintainership and better integration testing so update
MAINTAINERS file accordingly"
* tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux:
MAINTAINERS: handle fbdev changes through drm-misc tree
Linus Torvalds [Fri, 9 Aug 2019 16:23:23 +0000 (09:23 -0700)]
Merge tag 'pwm/for-5.3-rc4' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fix from Thierry Reding:
"A single fix for a backlight brightness regression introduced in
this merge window"
* tag 'pwm/for-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fallback to the static lookup-list when acpi_pwm_get fails
Linus Torvalds [Fri, 9 Aug 2019 16:21:27 +0000 (09:21 -0700)]
Merge tag 'sound-5.3-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes at this time since we've received the ASoC fix
batch now.
- Some coverage in ASoC core mostly for minor issues like NULL checks
for DPCM and proper error handling in DAI instantiation
- A collection of small device-specific changes in various ASoC codec
and platform drivers
- OF-tree refcount fixes in a few ASoC drivers
- Fixes of memory leaks in the error paths of various ASoC / ALSA
drivers
- A workaround for a long-standing issue on AMD HD-audio device
- Updates of MAINTAINERS, mail addresses, file permission fixups"
* tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (38 commits)
ALSA: firewire: fix a memory leak bug
sound: fix a memory leak bug
ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)
ALSA: hiface: fix multiple memory leak bugs
ALSA: hda - Don't override global PCM hw info flag
ALSA: usb-audio: fix a memory leak bug
ASoC: max98373: Remove executable bits
ASoC: amd: acp3x: use dma address for acp3x dma driver
ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver
ASoC: max98373: add 88200 and 96000 sampling rate support
ASoC: sun4i-i2s: Incorrect SR and WSS computation
MAINTAINERS: Update Intel ASoC drivers maintainers
ASoC: ti: davinci-mcasp: Correct slot_width posed constraint
ASoC: rockchip: Fix mono capture
ASoC: Intel: Fix some acpi vs apci typo in somme comments
ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode
ASoC: Fail card instantiation if DAI format setup fails
ASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread
ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links
ASoC: dapm: fix a memory leak bug
...
Linus Torvalds [Fri, 9 Aug 2019 16:19:53 +0000 (09:19 -0700)]
Merge tag 'media/v5.3-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"A fix at the vivid CEC support"
* tag 'media/v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vivid: fix missing cec adapter name
Linus Torvalds [Fri, 9 Aug 2019 16:18:36 +0000 (09:18 -0700)]
Merge tag 'pm-5.3-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Revert a recent PCI power management change that caused problems to
occur on multiple systems (Mika Westerberg)"
* tag 'pm-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI: Add missing link delays required by the PCIe spec"
Linus Torvalds [Fri, 9 Aug 2019 16:17:05 +0000 (09:17 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a number of bugs in the ccp driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Ignore tag length when decrypting GCM ciphertext
crypto: ccp - Add support for valid authsize values less than 16
crypto: ccp - Fix oops by properly managing allocated structures
Andreas Gruenbacher [Mon, 5 Aug 2019 11:22:03 +0000 (12:22 +0100)]
gfs2: gfs2_walk_metadata fix
It turns out that the current version of gfs2_metadata_walker suffers
from multiple problems that can cause gfs2_hole_size to report an
incorrect size. This will confuse fiemap as well as lseek with the
SEEK_DATA flag.
Fix that by changing gfs2_hole_walker to compute the metapath to the
first data block after the hole (if any), and compute the hole size
based on that.
Fixes xfstest generic/490.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Paolo Bonzini [Fri, 9 Aug 2019 14:53:50 +0000 (16:53 +0200)]
Merge tag 'kvmarm-fixes-for-5.3-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.3, take #2
- Fix our system register reset so that we stop writing
non-sensical values to them, and track which registers
get reset instead.
- Sync VMCR back from the GIC on WFI so that KVM has an
exact vue of PMR.
- Reevaluate state of HW-mapped, level triggered interrupts
on enable.
Paolo Bonzini [Fri, 9 Aug 2019 14:53:39 +0000 (16:53 +0200)]
Merge tag 'kvmarm-fixes-for-5.3' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.3
- A bunch of switch/case fall-through annotation, fixing one actual bug
- Fix PMU reset bug
- Add missing exception class debug strings
Naresh Kamboju [Wed, 7 Aug 2019 13:58:14 +0000 (13:58 +0000)]
selftests: kvm: Adding config fragments
selftests kvm test cases need pre-required kernel configs for the test
to get pass.
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth [Wed, 31 Jul 2019 14:28:51 +0000 (16:28 +0200)]
KVM: selftests: Update gitignore file for latest changes
The kvm_create_max_vcpus test has been moved to the main directory,
and sync_regs_test is now available on s390x, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 5 Aug 2019 09:11:08 +0000 (11:11 +0200)]
kvm: remove unnecessary PageReserved check
The same check is already done in kvm_is_reserved_pfn.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bartlomiej Zolnierkiewicz [Fri, 9 Aug 2019 13:46:40 +0000 (15:46 +0200)]
MAINTAINERS: handle fbdev changes through drm-misc tree
fbdev patches will now go to upstream through drm-misc tree (IOW
starting with v5.4 merge window fbdev changes will be included in
DRM pull request) for improved maintainership and better integration
testing. Update MAINTAINERS file accordingly.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Coly Li [Fri, 9 Aug 2019 06:14:05 +0000 (14:14 +0800)]
bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()"
This reverts commit
89e0341af082dbc170019f908846f4a424efc86b.
In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at
the end of list is necessary. Remove the NULL from last element of each
lists will cause the following panic,
[ 4340.455652] bcache: register_cache() registered cache device nvme0n1
[ 4340.464603] bcache: register_bdev() registered backing device sdk
[ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already
[ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set
354e1d46-d99f-4d8b-870b-
078b80dc88a6
[ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI
[ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4
[ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019
[ 5139.248006] task:
ffff888fb25c0b00 task.stack:
ffff9bbacc704000
[ 5139.248021] RIP: 0010:string+0x21/0x70
[ 5139.248030] RSP: 0018:
ffff9bbacc707bf0 EFLAGS:
00010286
[ 5139.248043] RAX:
ffffffffa7e432e3 RBX:
ffff8881c20da02a RCX:
ffff0a00ffffff04
[ 5139.248058] RDX:
3f00656863616362 RSI:
ffff8881c20db000 RDI:
ffffffffffffffff
[ 5139.248075] RBP:
ffff8881c20db000 R08:
0000000000000000 R09:
ffff8881c20da02a
[ 5139.248090] R10:
0000000000000004 R11:
0000000000000000 R12:
ffff9bbacc707c48
[ 5139.248104] R13:
0000000000000fd6 R14:
ffffffffc0665855 R15:
ffffffffc0665855
[ 5139.248119] FS:
00007faf253b8700(0000) GS:
ffff88903f840000(0000) knlGS:
0000000000000000
[ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 5139.248149] CR2:
00007faf25395008 CR3:
0000000f72150006 CR4:
00000000007606e0
[ 5139.248164] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 5139.248179] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 5139.248193] PKRU:
55555554
[ 5139.248200] Call Trace:
[ 5139.248210] vsnprintf+0x1fb/0x510
[ 5139.248221] snprintf+0x39/0x40
[ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache]
[ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache]
[ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210
[ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache]
[ 5139.248297] sysfs_kf_seq_show+0xbb/0x190
[ 5139.248308] seq_read+0xfc/0x3c0
[ 5139.248317] __vfs_read+0x26/0x140
[ 5139.248327] vfs_read+0x87/0x130
[ 5139.248336] SyS_read+0x42/0x90
[ 5139.248346] do_syscall_64+0x74/0x160
[ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 5139.248370] RIP: 0033:0x7faf24eea370
[ 5139.248379] RSP: 002b:
00007fff82d03f38 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
[ 5139.248395] RAX:
ffffffffffffffda RBX:
0000000000020000 RCX:
00007faf24eea370
[ 5139.248411] RDX:
0000000000020000 RSI:
00007faf25396000 RDI:
0000000000000003
[ 5139.248426] RBP:
00007faf25396000 R08:
00000000ffffffff R09:
0000000000000000
[ 5139.248441] R10:
000000007c9d4d41 R11:
0000000000000246 R12:
00007faf25396000
[ 5139.248456] R13:
0000000000000003 R14:
0000000000000000 R15:
0000000000000fff
[ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e
The simplest way to fix is to revert commit
89e0341af082 ("bcache: use
sysfs_match_string() instead of __sysfs_match_string()").
This bug was introduced in Linux v5.2, so this fix only applies to
Linux v5.2 is enough for stable tree maintainer.
Fixes:
89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()")
Cc: stable@vger.kernel.org
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reported-by: Peifeng Lin <pflin@suse.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Heiko Carstens [Wed, 7 Aug 2019 12:31:59 +0000 (14:31 +0200)]
s390/vdso: map vdso also for statically linked binaries
s390 does not map the vdso for statically linked binaries, assuming
that this doesn't make sense. See commit
fc5243d98ac2 ("[S390]
arch_setup_additional_pages arguments").
However with glibc commit
d665367f596d ("linux: Enable vDSO for static
linking as default (BZ#19767)") and commit
5e855c895401 ("s390: Enable
VDSO for static linking") the vdso is also used for statically linked
binaries - if the kernel would make it available.
Therefore map the vdso always, just like all other architectures.
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Alexandru Elisei [Wed, 7 Aug 2019 09:53:20 +0000 (10:53 +0100)]
KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
A HW mapped level sensitive interrupt asserted by a device will not be put
into the ap_list if it is disabled at the VGIC level. When it is enabled
again, it will be inserted into the ap_list and written to a list register
on guest entry regardless of the state of the device.
We could argue that this can also happen on real hardware, when the command
to enable the interrupt reached the GIC before the device had the chance to
de-assert the interrupt signal; however, we emulate the distributor and
redistributors in software and we can do better than that.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Marc Zyngier [Mon, 5 Aug 2019 09:34:51 +0000 (10:34 +0100)]
KVM: arm: Don't write junk to CP15 registers on reset
At the moment, the way we reset CP15 registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.
The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a CP15 register while junk is in there, bad thing may happen.
Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something.
In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the CP15 reg leave outside
of the cp15_regs[] array). It may well be axed in the near future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Marc Zyngier [Mon, 5 Aug 2019 09:34:51 +0000 (10:34 +0100)]
KVM: arm64: Don't write junk to sysregs on reset
At the moment, the way we reset system registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.
The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a system register while junk is in there, bad thing may happen.
Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something. This requires fixing a couple of
sysreg refinition in the trap table.
In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the sysregs leave outside of
the sys_regs[] array). It may well be axed in the near future.
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Dave Airlie [Fri, 9 Aug 2019 05:46:09 +0000 (15:46 +1000)]
Merge tag 'drm-intel-fixes-2019-08-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.3-rc4:
- Fix GLK DSI escape clock setting
- Fix a memleak on HDCP revoked Ksv error path
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pnlghz79.fsf@intel.com
Dave Airlie [Fri, 9 Aug 2019 05:45:02 +0000 (15:45 +1000)]
Merge tag 'drm-misc-fixes-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.3-rc4:
- Suspend fix for rockchip
- Fix unterminated strncpy cmdline mode parser
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ace294a6-6bb2-d9b1-695d-3260e1d60831@linux.intel.com
Dave Airlie [Fri, 9 Aug 2019 05:40:06 +0000 (15:40 +1000)]
Merge branch 'vmwgfx-fixes-5.3' of git://people.freedesktop.org/~thomash/linux into drm-fixes
One single memory leak fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom "VMware" <thomas@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808094615.31040-1-thomas@shipmail.org
Paul Walmsley [Thu, 8 Aug 2019 22:36:44 +0000 (15:36 -0700)]
dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
The YAML binding document for SiFive boards has an incorrect
compatible string for the HiFive Unleashed board. Change it to match
the name of the board on the SiFive web site:
https://www.sifive.com/boards/hifive-unleashed
which also matches the contents of the board DT data file:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts#n13
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Acked-by: Rob Herring <robh@kernel.org>
Paul Walmsley [Thu, 8 Aug 2019 21:46:58 +0000 (14:46 -0700)]
dt-bindings: riscv: remove obsolete cpus.txt
Remove the now-obsolete riscv/cpus.txt DT binding document, since we
are using YAML binding documentation instead.
While doing so, transfer the explanatory text about 'harts' (with some
edits) into the YAML file, at Rob's request.
Link: https://lore.kernel.org/linux-riscv/CAL_JsqJs6MtvmuyAknsUxQymbmoV=G+=JfS1PQj9kNHV7fjC9g@mail.gmail.com/
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Palmer Dabbelt [Wed, 7 Aug 2019 00:05:08 +0000 (17:05 -0700)]
RISC-V: Remove udivdi3
This should never have landed in the first place: it was added as part
of 64-bit divide support for 32-bit systems, but the kernel doesn't
allow this sort of division. I must have forgotten to remove it.
This patch removes the support. Since this routine only worked on
64-bit platforms but was only built on 32-bit platforms, it's
essentially just nonsense anyway.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Link: https://lore.kernel.org/linux-riscv/nycvar.YSQ.7.76.1908061413360.19480@knanqh.ubzr/T/#t
Reported-by: Eric Lin <tesheng@andestech.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Paul Walmsley [Wed, 7 Aug 2019 01:28:33 +0000 (18:28 -0700)]
riscv: delay: use do_div() instead of __udivdi3()
In preparation for removing __udivdi3() from the RISC-V
architecture-specific files, convert its one user to use do_div().
This avoids breaking the RV32 build after __udivdi3() is removed.
This second version removes the assignment of the remainder to an
unused temporary variable. Thanks to Nicolas Pitre <nico@fluxnic.net>
for the suggestion.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Atish Patra [Sat, 3 Aug 2019 04:27:23 +0000 (21:27 -0700)]
dt-bindings: Update the riscv,isa string description
Since the RISC-V specification states that ISA description strings are
case-insensitive, there's no functional difference between mixed-case,
upper-case, and lower-case ISA strings. Thus, to simplify parsing,
specify that the letters present in "riscv,isa" must be all lowercase.
Suggested-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Linus Torvalds [Thu, 8 Aug 2019 21:47:19 +0000 (14:47 -0700)]
Merge tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- NFSv4: Ensure we check the return value of update_open_stateid() so
we correctly track active open state.
- NFSv4: Fix for delegation state recovery to ensure we recover all
open modes that are active.
- NFSv4: Fix an Oops in nfs4_do_setattr
Fixes:
- NFS: Fix regression whereby fscache errors are appearing on 'nofsc'
mounts
- NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()
- NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid
- pNFS: Report errors from the call to nfs4_select_rw_stateid()
- NFSv4: Various other delegation and open stateid recovery fixes
- NFSv4: Fix state recovery behaviour when server connection times
out"
* tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Ensure state recovery handles ETIMEDOUT correctly
NFS: Fix regression whereby fscache errors are appearing on 'nofsc' mounts
NFSv4: Fix an Oops in nfs4_do_setattr
NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()
NFSv4: Check the return value of update_open_stateid()
NFSv4.1: Only reap expired delegations
NFSv4.1: Fix open stateid recovery
NFSv4: Report the error from nfs4_select_rw_stateid()
NFSv4: When recovering state fails with EAGAIN, retry the same recovery
NFSv4: Print an error in the syslog when state is marked as irrecoverable
NFSv4: Fix delegation state recovery
NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid
Thomas Gleixner [Thu, 8 Aug 2019 20:12:01 +0000 (22:12 +0200)]
Merge tag 'perf-urgent-for-mingo-5.3-
20190808' of git://git./linux/kernel/git/acme/linux into perf/urgent
perf/urgent fixes:
db-export:
Adrian Hunter:
- Fix thread__exec_comm() picking of main thread COMM for pre-existing,
synthesized from /proc data records.
annotate:
Arnaldo Carvalho de Melo:
- Fix printing of unaugmented disassembled instructions from BPF, some
lines were leaving leftovers from the previous screen, due to use of
newlines by binutils's libopcode disassembler.
perf ftrace:
He Zhe:
- Fix cpumask problems when only one CPU is present.
PMU events:
Jin Yao:
- Add missing "cpu_clk_unhalted.core" event.
perf bench:
Jiri Olsa:
- Fix cpu0 binding in the NUMA benchmarks.
s390:
Thomas Richter:
- Fix module size calculations.
build system:
Masanari Iida:
- Fix a typo in a variable name in the Documentation Makefile
misc:
Ian Rogers:
- Fix include paths in ui directory.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Mon, 29 Jul 2019 07:27:55 +0000 (15:27 +0800)]
perf pmu-events: Fix missing "cpu_clk_unhalted.core" event
The events defined in pmu-events JSON are parsed and added into perf
tool. For fixed counters, we handle the encodings between JSON and perf
by using a static array fixed[].
But the fixed[] has missed an important event "cpu_clk_unhalted.core".
For example, on the Tremont platform,
[root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a
event syntax error: 'cpu_clk_unhalted.core'
\___ parser error
With this patch, the event cpu_clk_unhalted.core can be parsed.
[root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv
------------------------------------------------------------
perf_event_attr:
type 4
size 112
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
...
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190729072755.2166-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Wed, 24 Jul 2019 12:27:03 +0000 (14:27 +0200)]
perf annotate: Fix s390 gap between kernel end and module start
During execution of command 'perf top' the error message:
Not enough memory for annotating '__irf_end' symbol!)
is emitted from this call sequence:
__cmd_top
perf_top__mmap_read
perf_top__mmap_read_idx
perf_event__process_sample
hist_entry_iter__add
hist_iter__top_callback
perf_top__record_precise_ip
hist_entry__inc_addr_samples
symbol__inc_addr_samples
symbol__get_annotation
symbol__alloc_hist
In this function the size of symbol __irf_end is calculated. The size of
a symbol is the difference between its start and end address.
When the symbol was read the first time, its start and end was set to:
symbol__new: __irf_end 0xe954d0-0xe954d0
which is correct and maps with /proc/kallsyms:
root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms
0000000000e954d0 t __irf_end
root@s8360046:~/linux-4.15.0/tools/perf#
In function symbol__alloc_hist() the end of symbol __irf_end is
symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8
which is identical with the first module entry in /proc/kallsyms
This results in a symbol size of __irf_req for histogram analyses of
70334140059072 bytes and a malloc() for this requested size fails.
The root cause of this is function
__dso__load_kallsyms()
+-> symbols__fixup_end()
Function symbols__fixup_end() enlarges the last symbol in the kallsyms
map:
# fgrep __irf_end /proc/kallsyms
0000000000e954d0 t __irf_end
#
to the start address of the first module:
# cat /proc/kallsyms | sort | egrep ' [tT] '
....
0000000000e952d0 T __security_initcall_end
0000000000e954d0 T __initramfs_size
0000000000e954d0 t __irf_end
000003ff800045a8 T fc_get_event_number [scsi_transport_fc]
000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc]
000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc]
000003ff800046d0 t fc_target_setup [scsi_transport_fc]
On s390 the kernel is located around memory address 0x200, 0x10000 or
0x100000, depending on linux version. Modules however start some- where
around 0x3ff xxxx xxxx.
This is different than x86 and produces a large gap for which histogram
allocation fails.
Fix this by detecting the kernel's last symbol and do no adjustment for
it. Introduce a weak function and handle s390 specifics.
Reported-by: Klaus Theurich <klaus.theurich@de.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Wed, 24 Jul 2019 12:27:02 +0000 (14:27 +0200)]
perf record: Fix module size on s390
On s390 the modules loaded in memory have the text segment located after
the GOT and Relocation table. This can be seen with this output:
[root@m35lp76 perf]# fgrep qeth /proc/modules
qeth 151552 1 qeth_l2, Live 0x000003ff800b2000
...
[root@m35lp76 perf]# cat /sys/module/qeth/sections/.text
0x000003ff800b3990
[root@m35lp76 perf]#
There is an offset of 0x1990 bytes. The size of the qeth module is
151552 bytes (0x25000 in hex).
The location of the GOT/relocation table at the beginning of a module is
unique to s390.
commit
203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
adjusts the start address of a module in the map structures, but does
not adjust the size of the modules. This leads to overlapping of module
maps as this example shows:
[root@m35lp76 perf] # ./perf report -D
0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000)
@ 0]: x /lib/modules/.../qeth.ko.xz
0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000)
@ 0]: x /lib/modules/.../ip6_tables.ko.xz
The module qeth.ko has an adjusted start address modified to b3990, but
its size is unchanged and the module ends at 0x3ff800d8990. This end
address overlaps with the next modules start address of 0x3ff800d85a0.
When the size of the leading GOT/Relocation table stored in the
beginning of the text segment (0x1990 bytes) is subtracted from module
qeth end address, there are no overlaps anymore:
0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000
which is the same as
0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000.
To fix this issue, also adjust the modules size in function
arch__fix_module_text_start(). Add another function parameter named size
and reduce the size of the module when the text segment start address is
changed.
Output after:
0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670)
@ 0]: x /lib/modules/.../qeth.ko.xz
0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60)
@ 0]: x /lib/modules/.../ip6_tables.ko.xz
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org
Fixes:
203d8a4aa6ed ("perf s390: Fix 'start' address of module's map")
Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Wed, 31 Jul 2019 22:54:41 +0000 (15:54 -0700)]
perf tools: Fix include paths in ui directory
These paths point to the wrong location but still work because they get
picked up by a -I flag that happens to direct to the correct file. Fix
paths to point to the correct location without -I flags.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190731225441.233800-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masanari Iida [Thu, 1 Aug 2019 03:28:12 +0000 (12:28 +0900)]
perf tools: Fix a typo in a variable name in the Documentation Makefile
This patch fix a spelling typo in a variable name in the Documentation Makefile.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190801032812.25018-1-standby24x7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
He Zhe [Fri, 2 Aug 2019 08:29:52 +0000 (16:29 +0800)]
perf cpumap: Fix writing to illegal memory in handling cpumap mask
cpu_map__snprint_mask() would write to illegal memory pointed by
zalloc(0) when there is only one cpu.
This patch fixes the calculation and adds sanity check against the input
parameters.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes:
4400ac8a9a90 ("perf cpumap: Introduce cpu_map__snprint_mask()")
Link: http://lkml.kernel.org/r/1564734592-15624-2-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
He Zhe [Fri, 2 Aug 2019 08:29:51 +0000 (16:29 +0800)]
perf ftrace: Fix failure to set cpumask when only one cpu is present
The buffer containing the string used to set cpumask is overwritten at
the end of the string later in cpu_map__snprint_mask due to not enough
memory space, when there is only one cpu.
And thus causes the following failure:
$ perf ftrace ls
failed to reset ftrace
$
This patch fixes the calculation of the cpumask string size.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Fixes:
dc23103278c5 ("perf ftrace: Add support for -a and -C option")
Link: http://lkml.kernel.org/r/1564734592-15624-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 8 Aug 2019 06:48:23 +0000 (09:48 +0300)]
perf db-export: Fix thread__exec_comm()
Threads synthesized from /proc have comms with a start time of zero, and
not marked as "exec". Currently, there can be 2 such comms. The first is
created by processing a synthesized fork event and is set to the
parent's comm string, and the second by processing a synthesized comm
event set to the thread's current comm string.
In the absence of an "exec" comm, thread__exec_comm() picks the last
(oldest) comm, which, in the case above, is the parent's comm string.
For a main thread, that is very probably wrong. Use the second-to-last
in that case.
This affects only db-export because it is the only user of
thread__exec_comm().
Example:
$ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1
$ sudo chown ahunter pt-a-sleep-1
Before:
$ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls
$ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view'
comm_id command thread_id pid tid
---------- ---------- ---------- ---------- ----------
1 swapper 1 0 0
2 rcu_sched 2 10 10
3 kthreadd 3 78 78
5 sudo 4 15180 15180
5 sudo 5 15180 15182
7 kworker/4: 6 10335 10335
8 kthreadd 7 55 55
10 systemd 8 865 865
10 systemd 9 865 875
13 perf 10 15181 15181
15 sleep 10 15181 15181
16 kworker/3: 11 14179 14179
17 kthreadd 12 29376 29376
19 systemd 13 746 746
21 systemd 14 401 401
23 systemd 15 879 879
23 systemd 16 879 945
25 kthreadd 17 556 556
27 kworker/u1 18 14136 14136
28 kworker/u1 19 15021 15021
29 kthreadd 20 509 509
31 systemd 21 836 836
31 systemd 22 836 967
33 systemd 23 1148 1148
33 systemd 24 1148 1163
35 kworker/2: 25 17988 17988
36 kworker/0: 26 13478 13478
After:
$ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls
$ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view'
comm_id command thread_id pid tid
---------- ---------- ---------- ---------- ----------
1 swapper 1 0 0
2 rcu_sched 2 10 10
3 kswapd0 3 78 78
4 perf 4 15180 15180
4 perf 5 15180 15182
6 kworker/4: 6 10335 10335
7 kcompactd0 7 55 55
8 accounts-d 8 865 865
8 accounts-d 9 865 875
10 perf 10 15181 15181
12 sleep 10 15181 15181
13 kworker/3: 11 14179 14179
14 kworker/1: 12 29376 29376
15 haveged 13 746 746
16 systemd-jo 14 401 401
17 NetworkMan 15 879 879
17 NetworkMan 16 879 945
19 irq/131-iw 17 556 556
20 kworker/u1 18 14136 14136
21 kworker/u1 19 15021 15021
22 kworker/u1 20 509 509
23 thermald 21 836 836
23 thermald 22 836 967
25 unity-sett 23 1148 1148
25 unity-sett 24 1148 1163
27 kworker/2: 25 17988 17988
28 kworker/0: 26 13478 13478
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
65de51f93ebf ("perf tools: Identify which comms are from exec")
Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 6 Aug 2019 14:24:09 +0000 (11:24 -0300)]
perf annotate: Fix printing of unaugmented disassembled instructions from BPF
The code to disassemble BPF programs uses binutil's disassembling
routines, and those use in turn fprintf to print to a memstream FILE,
adding a newline at the end of each line, which ends up confusing the
TUI routines called from:
annotate_browser__write()
annotate_line__write()
annotate_browser__printf()
ui_browser__vprintf()
SLsmg_vprintf()
The SLsmg_vprintf() function in the slang library gets confused with the
terminating newline, so make the disasm_line__parse() function that
parses the lines produced by the BPF specific disassembler (that uses
binutil's libopcodes) and the lines produced by the objdump based
disassembler used for everything else (and that doesn't adds this
terminating newline) trim the end of the line in addition of the
beginning.
This way when disasm_line->ops.raw, i.e. for instructions without a
special scnprintf() method, we'll not have that \n getting in the way of
filling the screen right after the instruction with spaces to avoid
leaving what was on the screen before and thus garbling the annotation
screen, breaking scrolling, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Fixes:
6987561c9e86 ("perf annotate: Enable annotation of BPF programs")
Link: https://lkml.kernel.org/n/tip-unbr5a5efakobfr6rhxq99ta@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jia He [Wed, 7 Aug 2019 04:58:51 +0000 (12:58 +0800)]
arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64
Without this patch, the MAP_SYNC test case will cause a print_bad_pte
warning on arm64 as follows:
[ 25.542693] BUG: Bad page map in process mapdax333 pte:
2e8000448800f53 pmd:
41ff5f003
[ 25.546360] page:
ffff7e0010220000 refcount:1 mapcount:-1 mapping:
ffff8003e29c7440 index:0x0
[ 25.550281] ext4_dax_aops
[ 25.550282] name:"__aaabbbcccddd__"
[ 25.551553] flags: 0x3ffff0000001002(referenced|reserved)
[ 25.555802] raw:
03ffff0000001002 ffff8003dfffa908 0000000000000000 ffff8003e29c7440
[ 25.559446] raw:
0000000000000000 0000000000000000 00000001fffffffe 0000000000000000
[ 25.563075] page dumped because: bad pte
[ 25.564938] addr:
0000ffffbe05b000 vm_flags:
208000fb anon_vma:
0000000000000000 mapping:
ffff8003e29c7440 index:0
[ 25.574272] file:__aaabbbcccddd__ fault:ext4_dax_fault mmmmap:ext4_file_mmap readpage:0x0
[ 25.578799] CPU: 1 PID: 1180 Comm: mapdax333 Not tainted 5.2.0+ #21
[ 25.581702] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 25.585624] Call trace:
[ 25.587008] dump_backtrace+0x0/0x178
[ 25.588799] show_stack+0x24/0x30
[ 25.590328] dump_stack+0xa8/0xcc
[ 25.591901] print_bad_pte+0x18c/0x218
[ 25.593628] unmap_page_range+0x778/0xc00
[ 25.595506] unmap_single_vma+0x94/0xe8
[ 25.597304] unmap_vmas+0x90/0x108
[ 25.598901] unmap_region+0xc0/0x128
[ 25.600566] __do_munmap+0x284/0x3f0
[ 25.602245] __vm_munmap+0x78/0xe0
[ 25.603820] __arm64_sys_munmap+0x34/0x48
[ 25.605709] el0_svc_common.constprop.0+0x78/0x168
[ 25.607956] el0_svc_handler+0x34/0x90
[ 25.609698] el0_svc+0x8/0xc
[...]
The root cause is in _vm_normal_page, without the PTE_SPECIAL bit,
the return value will be incorrectly set to pfn_to_page(pfn) instead
of NULL. Besides, this patch also rewrite the pmd_mkdevmap to avoid
setting PTE_SPECIAL for pmd
The MAP_SYNC test case is as follows(Provided by Yibo Cai)
$#include <stdio.h>
$#include <string.h>
$#include <unistd.h>
$#include <sys/file.h>
$#include <sys/mman.h>
$#ifndef MAP_SYNC
$#define MAP_SYNC 0x80000
$#endif
/* mount -o dax /dev/pmem0 /mnt */
$#define F "/mnt/__aaabbbcccddd__"
int main(void)
{
int fd;
char buf[4096];
void *addr;
if ((fd = open(F, O_CREAT|O_TRUNC|O_RDWR, 0644)) < 0) {
perror("open1");
return 1;
}
if (write(fd, buf, 4096) != 4096) {
perror("lseek");
return 1;
}
addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_SYNC, fd, 0);
if (addr == MAP_FAILED) {
perror("mmap");
printf("did you mount with '-o dax'?\n");
return 1;
}
memset(addr, 0x55, 4096);
if (munmap(addr, 4096) == -1) {
perror("munmap");
return 1;
}
close(fd);
return 0;
}
Fixes:
73b20c84d42d ("arm64: mm: implement pte_devmap support")
Reported-by: Yibo Cai <Yibo.Cai@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Thu, 8 Aug 2019 16:57:50 +0000 (09:57 -0700)]
Merge tag '5.3-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six small SMB3 fixes, two for stable"
* tag '5.3-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Kernel oops mounting a encryptData share with CONFIG_DEBUG_VIRTUAL
smb3: update TODO list of missing features
smb3: send CAP_DFS capability during session setup
SMB3: Fix potential memory leak when processing compound chain
SMB3: Fix deadlock in validate negotiate hits reconnect
cifs: fix rmmod regression in cifs.ko caused by force_sig changes
Mikulas Patocka [Thu, 8 Aug 2019 15:17:01 +0000 (11:17 -0400)]
loop: set PF_MEMALLOC_NOIO for the worker thread
A deadlock with this stacktrace was observed.
The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio
shrinker and the shrinker depends on I/O completion in the dm-bufio
subsystem.
In order to fix the deadlock (and other similar ones), we set the flag
PF_MEMALLOC_NOIO at loop thread entry.
PID: 474 TASK:
ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0"
#0 [
ffff8813dedfb938] __schedule at
ffffffff8173f405
#1 [
ffff8813dedfb990] schedule at
ffffffff8173fa27
#2 [
ffff8813dedfb9b0] schedule_timeout at
ffffffff81742fec
#3 [
ffff8813dedfba60] io_schedule_timeout at
ffffffff8173f186
#4 [
ffff8813dedfbaa0] bit_wait_io at
ffffffff8174034f
#5 [
ffff8813dedfbac0] __wait_on_bit at
ffffffff8173fec8
#6 [
ffff8813dedfbb10] out_of_line_wait_on_bit at
ffffffff8173ff81
#7 [
ffff8813dedfbb90] __make_buffer_clean at
ffffffffa038736f [dm_bufio]
#8 [
ffff8813dedfbbb0] __try_evict_buffer at
ffffffffa0387bb8 [dm_bufio]
#9 [
ffff8813dedfbbd0] dm_bufio_shrink_scan at
ffffffffa0387cc3 [dm_bufio]
#10 [
ffff8813dedfbc40] shrink_slab at
ffffffff811a87ce
#11 [
ffff8813dedfbd30] shrink_zone at
ffffffff811ad778
#12 [
ffff8813dedfbdc0] kswapd at
ffffffff811ae92f
#13 [
ffff8813dedfbec0] kthread at
ffffffff810a8428
#14 [
ffff8813dedfbf50] ret_from_fork at
ffffffff81745242
PID: 14127 TASK:
ffff881455749c00 CPU: 11 COMMAND: "loop1"
#0 [
ffff88272f5af228] __schedule at
ffffffff8173f405
#1 [
ffff88272f5af280] schedule at
ffffffff8173fa27
#2 [
ffff88272f5af2a0] schedule_preempt_disabled at
ffffffff8173fd5e
#3 [
ffff88272f5af2b0] __mutex_lock_slowpath at
ffffffff81741fb5
#4 [
ffff88272f5af330] mutex_lock at
ffffffff81742133
#5 [
ffff88272f5af350] dm_bufio_shrink_count at
ffffffffa03865f9 [dm_bufio]
#6 [
ffff88272f5af380] shrink_slab at
ffffffff811a86bd
#7 [
ffff88272f5af470] shrink_zone at
ffffffff811ad778
#8 [
ffff88272f5af500] do_try_to_free_pages at
ffffffff811adb34
#9 [
ffff88272f5af590] try_to_free_pages at
ffffffff811adef8
#10 [
ffff88272f5af610] __alloc_pages_nodemask at
ffffffff811a09c3
#11 [
ffff88272f5af710] alloc_pages_current at
ffffffff811e8b71
#12 [
ffff88272f5af760] new_slab at
ffffffff811f4523
#13 [
ffff88272f5af7b0] __slab_alloc at
ffffffff8173a1b5
#14 [
ffff88272f5af880] kmem_cache_alloc at
ffffffff811f484b
#15 [
ffff88272f5af8d0] do_blockdev_direct_IO at
ffffffff812535b3
#16 [
ffff88272f5afb00] __blockdev_direct_IO at
ffffffff81255dc3
#17 [
ffff88272f5afb30] xfs_vm_direct_IO at
ffffffffa01fe3fc [xfs]
#18 [
ffff88272f5afb90] generic_file_read_iter at
ffffffff81198994
#19 [
ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at
ffffffffa020c970 [xfs]
#20 [
ffff88272f5afcc0] lo_rw_aio at
ffffffffa0377042 [loop]
#21 [
ffff88272f5afd70] loop_queue_work at
ffffffffa0377c3b [loop]
#22 [
ffff88272f5afe60] kthread_worker_fn at
ffffffff810a8a0c
#23 [
ffff88272f5afec0] kthread at
ffffffff810a8428
#24 [
ffff88272f5aff50] ret_from_fork at
ffffffff81745242
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thiébaud Weksteen [Tue, 6 Aug 2019 11:00:50 +0000 (13:00 +0200)]
usb: setup authorized_default attributes using usb_bus_notify
Currently, the authorized_default and interface_authorized_default
attributes for HCD are set up after the uevent has been sent to userland.
This creates a race condition where userland may fail to access this
file when processing the event. Move the appending of these attributes
earlier relying on the usb_bus_notify dispatcher.
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190806110050.38918-1-tweek@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Wed, 7 Aug 2019 09:36:47 +0000 (11:36 +0200)]
bdev: Fixup error handling in blkdev_get()
Commit
89e524c04fa9 ("loop: Fix mount(2) failure due to race with
LOOP_SET_FD") converted blkdev_get() to use the new helpers for
finishing claiming of a block device. However the conversion botched the
error handling in blkdev_get() and thus the bdev has been marked as held
even in case __blkdev_get() returned error. This led to occasional
warnings with block/001 test from blktests like:
kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0
Correct the error handling.
CC: stable@vger.kernel.org
Fixes:
89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Paolo Valente [Wed, 7 Aug 2019 17:21:11 +0000 (19:21 +0200)]
block, bfq: handle NULL return value by bfq_init_rq()
As reported in [1], the call bfq_init_rq(rq) may return NULL in case
of OOM (in particular, if rq->elv.icq is NULL because memory
allocation failed in failed in ioc_create_icq()).
This commit handles this circumstance.
[1] https://lkml.org/lkml/2019/7/22/824
Cc: Hsin-Yi Wang <hsinyi@google.com>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Hsin-Yi Wang <hsinyi@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Paolo Valente [Wed, 7 Aug 2019 14:17:54 +0000 (16:17 +0200)]
block, bfq: move update of waker and woken list to queue freeing
Since commit
13a857a4c4e8 ("block, bfq: detect wakers and
unconditionally inject their I/O"), every bfq_queue has a pointer to a
waker bfq_queue and a list of the bfq_queues it may wake. In this
respect, when a bfq_queue, say Q, remains with no I/O source attached
to it, Q cannot be woken by any other bfq_queue, and cannot wake any
other bfq_queue. Then Q must be removed from the woken list of its
possible waker bfq_queue, and all bfq_queues in the woken list of Q
must stop having a waker bfq_queue.
Q remains with no I/O source in two cases: when the last process
associated with Q exits or when such a process gets associated with a
different bfq_queue. Unfortunately, commit
13a857a4c4e8 ("block, bfq:
detect wakers and unconditionally inject their I/O") performed the
above updates only in the first case.
This commit fixes this bug by moving these updates to when Q gets
freed. This is a simple and safe way to handle all cases, as both the
above events, process exit and re-association, lead to Q being freed
soon, and because dangling references would come out only after Q gets
freed (if no update were performed).
Fixes:
13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O")
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Paolo Valente [Wed, 7 Aug 2019 14:17:53 +0000 (16:17 +0200)]
block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed
Since commit
13a857a4c4e8 ("block, bfq: detect wakers and
unconditionally inject their I/O"), BFQ stores, in a per-device
pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O
request completed. If some bfq_queue receives new I/O right after the
last request of last_completed_rq_bfqq has been completed, then
last_completed_rq_bfqq may be a waker bfq_queue.
But if the bfq_queue last_completed_rq_bfqq points to is freed, then
last_completed_rq_bfqq becomes a dangling reference. This commit
resets last_completed_rq_bfqq if the pointed bfq_queue is freed.
Fixes:
13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O")
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>