Stefan Wahren [Sun, 4 Jun 2023 12:12:21 +0000 (14:12 +0200)]
dt-bindings: mmc: convert bcm2835-sdhost bindings to YAML
Convert the DT binding document for bcm2835-sdhost from .txt to YAML.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230604121223.9625-9-stefan.wahren@i2se.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Victor Shih [Fri, 9 Jun 2023 07:14:41 +0000 (15:14 +0800)]
mmc: sdhci-pci-gli: Add support SD Express card for GL9767
Add support SD Express card for GL9767. The workflow of the
SD Express card in GL9767 is as below.
1. GL9767 operates in SD mode and set MMC_CAP2_SD_EXP flag.
2. If card is inserted, Host send CMD8 to ask the capabilities
of the card.
3. If the card has PCIe capability, then init_sd_express()
will be invoked.
4. If the card has been put in write protect state then the
SD features supported by SD mode but not supported by
PCIe mode, therefore GL9767 switch to SD mode.
5. If the card has not been put in write protect state then
GL9767 switch from SD mode to PCIe/NVMe mode and mmc driver
handover control to NVMe driver.
6. If card is removed, GL9767 will return to SD mode.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-5-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Victor Shih [Fri, 9 Jun 2023 07:14:40 +0000 (15:14 +0800)]
mmc: sdhci: Add VDD2 definition for power control register
Add new definition for VDD2 - UHS2 or PCIe/NVMe.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-4-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Victor Shih [Fri, 9 Jun 2023 07:14:39 +0000 (15:14 +0800)]
mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767
Set GL9767 SDR104's clock to 205MHz and enable SSC feature
depend on register 0x888 BIT(1).
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Victor Shih [Fri, 9 Jun 2023 07:14:38 +0000 (15:14 +0800)]
mmc: sdhci-pci-gli: Add Genesys Logic GL9767 support
Add support for the GL9767 chipset. GL9767 supports
SD3 mode likes UHS-I SDR50, SDR104.
Enable MSI interrupt for GL9767. Some platform do not
support PCI INTx and devices can not work without
interrupt.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230609071441.451464-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Wenbin Mei [Fri, 9 Jun 2023 10:13:55 +0000 (18:13 +0800)]
mmc: mtk-sd: reduce CIT for better performance
CQHCI_SSC1 indicates to CQE the polling period to use when using periodic
SEND_QUEUE_STATUS(CMD13) polling.
Since MSDC CQE uses msdc_hclk as ITCFVAL, so driver should use hclk
frequency to get the actual time.
The default value 0x1000 that corresponds to 150us for MediaTek SoCs, let's
decrease it to 0x40 that corresponds to 2.35us, which can improve the
performance of some eMMC devices.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230609101355.5220-2-wenbin.mei@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Komal Bajaj [Thu, 1 Jun 2023 11:11:26 +0000 (16:41 +0530)]
dt-bindings: mmc: sdhci-msm: Document the QDU1000/QRU1000 compatible
Document the compatible for SDHCI on QDU1000 and QRU1000 SoCs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Link: https://lore.kernel.org/r/20230601111128.19562-2-quic_kbajaj@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Christian Loehle [Thu, 25 May 2023 09:56:04 +0000 (09:56 +0000)]
mmc: block: ioctl: do write error check for spi
SPI doesn't have the usual PROG path we can check for error bits
after moving back to TRAN. Instead it holds the line LOW until
completion. We can then check if the card shows any errors or
is in IDLE state, indicating the line is no longer LOW because
the card was reset.
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/55920f880c9742f486f64aa44e25508e@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Chevron Li [Tue, 23 May 2023 11:11:14 +0000 (19:11 +0800)]
mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used.
Bayhub SD host has hardware limitation:
1.The upper 32bit address is inhibited to be written at SD Host Register
[03E][13]=0 (32bits addressing) mode, is admitted to be written only at
SD Host Register [03E][13]=1 (64bits addressing) mode.
2.Because of above item#1, need to configure SD Host Register [03E][13] to
1(64bits addressing mode) before set 64bit ADMA system address's higher
32bits SD Host Register [05F~05C] if 64 bits addressing mode is used.
The hardware limitation is reasonable for below reasons:
1.Normal flow should set DMA working mode first, then do
DMA-transfer-related configuration, such as system address.
2.The hardware limitation may avoid the software to configure wrong higher
32bit address at 32bits addressing mode although it is redundant.
The change that set 32bits/64bits addressing mode before set ADMA address,
has no side-effect to other host IPs for below reason:
The setting order is reasonable and standard: DMA Mode setting first and
then DMA address setting. It meets all DMA setting sequence.
Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230523111114.18124-1-chevron_li@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Yeqi Fu [Thu, 18 May 2023 10:12:16 +0000 (18:12 +0800)]
mmc: core: Remove unnecessary error checks and change return type
The error checks in mmc_blk_add_debugfs() and mmc_blk_remove_debugfs()
are extraneous. Therefore, this patch removes all error checks from
both functions.
Additionally, mmc_blk_add_debugfs() has been changed to return void
instead of an integer value that was never used. This simplifies the
function and improves its clarity.
Signed-off-by: Yeqi Fu <asuk4.q@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230518101216.369970-1-asuk4.q@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Arnd Bergmann [Tue, 16 May 2023 20:27:04 +0000 (22:27 +0200)]
memstick r592: make memstick_debug_get_tpc_name() static
There are no other files referencing this function, apparently
it was left global to avoid an 'unused function' warning when
the only caller is left out. With a 'W=1' build, it causes
a 'missing prototype' warning though:
drivers/memstick/host/r592.c:47:13: error: no previous prototype for 'memstick_debug_get_tpc_name' [-Werror=missing-prototypes]
Annotate the function as 'static __maybe_unused' to avoid both
problems.
Fixes:
926341250102 ("memstick: add driver for Ricoh R5C592 card reader")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516202714.560929-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Douglas Anderson [Wed, 10 May 2023 13:44:54 +0000 (06:44 -0700)]
mmc: mediatek: Avoid ugly error message when SDIO wakeup IRQ isn't used
When I boot a kukui-kodama board, I see an ugly warning in my kernel
log:
mtk-msdc
11240000.mmc: error -ENXIO: IRQ sdio_wakeup not found
It's pretty normal not to have an "sdio_wakeup" IRQ defined. In fact,
no device trees in mainline seem to have it. Let's use the
platform_get_irq_byname_optional() to avoid the error message.
Fixes:
527f36f5efa4 ("mmc: mediatek: add support for SDIO eint wakup IRQ")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230510064434.1.I935404c5396e6bf952e99bb7ffb744c6f7fd430b@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Simon Horman [Wed, 10 May 2023 12:39:00 +0000 (14:39 +0200)]
mmc: meson-mx-sdhc: Avoid cast to incompatible function type
Rather than casting mmc_free_host to an incompatible function type,
provide a trivial wrapper with the correct signature for the use-case.
Reported by clang-16 with W=1:
.../meson-mx-sdhc-mmc.c:791:38: error: cast from 'void (*)(struct mmc_host *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
ret = devm_add_action_or_reset(dev, (void(*)(void *))mmc_free_host,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device.h:265:38: note: expanded from macro 'devm_add_action_or_reset'
__devm_add_action_or_reset(release, action, data, #action)
^~~~~~
The same approach is taken in litex_mmc.c with the function
litex_mmc_free_host_wrapper(). There may be scope for consolidation.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230510-mmc-sdhci-msm-function-cast-v1-1-5ae634b24fbd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Florian Fainelli [Tue, 9 May 2023 19:44:53 +0000 (12:44 -0700)]
mmc: block: Suppress empty whitespaces in prints
If the device is not read-only, then we will be printing an empty
whitespace before the newline, fix that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230509194455.1791890-1-f.fainelli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Bjorn Andersson [Tue, 9 May 2023 03:01:35 +0000 (20:01 -0700)]
dt-bindings: mmc: sdhci-msm: Document SC8280XP SDHCI
Add compatible for the SDHCI block found in SC8280XP.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230509030136.1524860-1-quic_bjorande@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stanislav Jakubek [Mon, 8 May 2023 12:46:03 +0000 (14:46 +0200)]
dt-bindings: mmc: brcm,kona-sdhci: convert to YAML
Convert Broadcom Kona family SDHCI controller bindings to DT schema.
Changes during conversion:
- also mark reg and interrupts as required
- drop deprecated compatible (it's been deprecated for ~10 years)
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/a1fd4092b8a31c2ee58a3cd4cca062db13197b45.1683548624.git.stano.jakubek@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Uwe Kleine-König [Fri, 5 May 2023 22:15:06 +0000 (00:15 +0200)]
mmc: dw_mmc: Make dw_mci_pltfm_remove() return void
dw_mci_pltfm_remove() returned zero unconditionally. Make it return void
instead which makes its semantics a bit clearer.
Convert the drivers that use this function as .remove() callback to
.remove_new() which has the right prototype. This helps getting rid of
the platform_driver's remove callback that returns an int (which is
error prone). The other users didn't check the return value anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230505221506.1247424-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Mantas Pucka [Mon, 24 Apr 2023 12:13:31 +0000 (15:13 +0300)]
dt-bindings: mmc: sdhci-msm: add IPQ6018 compatible
IPQ6018 has a sdhci-msm compatible MMC controller. Add the appropriate
compatible to the documentation.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1682338412-15420-2-git-send-email-mantas@8devices.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Linus Torvalds [Sun, 11 Jun 2023 21:35:30 +0000 (14:35 -0700)]
Linux 6.4-rc6
Linus Torvalds [Sun, 11 Jun 2023 17:14:02 +0000 (10:14 -0700)]
Merge tag 'x86_urgent_for_v6.4_rc6' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Set up the kernel CS earlier in the boot process in case EFI boots
the kernel after bypassing the decompressor and the CS descriptor
used ends up being the EFI one which is not mapped in the identity
page table, leading to early SEV/SNP guest communication exceptions
resulting in the guest crashing
* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed
Linus Torvalds [Sun, 11 Jun 2023 17:07:35 +0000 (10:07 -0700)]
Merge tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five smb3 server fixes, all also for stable:
- Fix four slab out of bounds warnings: improve checks for protocol
id, and for small packet length, and for create context parsing,
and for negotiate context parsing
- Fix for incorrect dereferencing POSIX ACLs"
* tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate smb request protocol id
ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop
ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR()
ksmbd: fix out-of-bound read in parse_lease_state()
ksmbd: fix out-of-bound read in deassemble_neg_contexts()
Linus Torvalds [Sat, 10 Jun 2023 20:36:07 +0000 (13:36 -0700)]
Merge tag 'i2c-for-6.4-rc6' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Biggest news is that Andi Shyti steps in for maintaining the
controller drivers. Thank you very much!
Other than that, one new driver maintainer and the rest is usual
driver bugfixes. at24 has a Kconfig dependecy fix"
* tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
eeprom: at24: also select REGMAP
i2c: sprd: Delete i2c adapter in .remove's error path
i2c: mv64xxx: Fix reading invalid status value in atomic mode
i2c: designware: fix idx_write_cnt in read loop
i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate"
MAINTAINERS: Add myself as I2C host drivers maintainer
Linus Torvalds [Sat, 10 Jun 2023 20:21:04 +0000 (13:21 -0700)]
Merge tag 'soundwire-6.4-fixes' of git://git./linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
"Core fix for missing flag clear, error patch handling in qcom driver
and BIOS quirk for HP Spectre x360:
- HP Spectre x360 soundwire DMI quirk
- Error path handling for qcom driver
- Core fix for missing clear of alloc_slave_rt"
* tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: Add missing clear of alloc_slave_rt
soundwire: qcom: add proper error paths in qcom_swrm_startup()
soundwire: dmi-quirks: add new mapping for HP Spectre x360
Linus Torvalds [Sat, 10 Jun 2023 20:01:09 +0000 (13:01 -0700)]
Merge tag 'arm-fixes-6.4-2' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
Linus Torvalds [Fri, 9 Jun 2023 21:21:20 +0000 (14:21 -0700)]
Merge tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix an issue with the hardware queue nr_active, causing it to become
imbalanced (Tian)
- Fix an issue with null_blk not releasing pages if configured as
memory backed (Nitesh)
- Fix a locking issue in dasd (Jan)
* tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux:
s390/dasd: Use correct lock while counting channel queue length
null_blk: Fix: memory release when memory_backed=1
blk-mq: fix blk_mq_hw_ctx active request accounting
Linus Torvalds [Fri, 9 Jun 2023 18:04:08 +0000 (11:04 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio bug fixes from Michael Tsirkin:
"A bunch of fixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: use canonical ftrace path
vhost_vdpa: support PACKED when setting-getting vring_base
vhost: support PACKED when setting-getting vring_base
vhost: Fix worker hangs due to missed wake up calls
vhost: Fix crash during early vhost_transport_send_pkt calls
vhost_net: revert upend_idx only on retriable error
vhost_vdpa: tell vqs about the negotiated
vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister
tools/virtio: Add .gitignore for ringtest
tools/virtio: Fix arm64 ringtest compilation error
vduse: avoid empty string for dev name
vhost: use kzalloc() instead of kmalloc() followed by memset()
Linus Torvalds [Fri, 9 Jun 2023 17:53:58 +0000 (10:53 -0700)]
Merge tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for a potential data corruption in differential backup and
snapshot-based mirroring scenarios in RBD and a reference counting
fixup to avoid use-after-free in CephFS, all marked for stable"
* tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client:
ceph: fix use-after-free bug for inodes when flushing capsnaps
rbd: get snapshot context after exclusive lock is ensured to be held
rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting
Jan Höppner [Fri, 9 Jun 2023 15:37:50 +0000 (17:37 +0200)]
s390/dasd: Use correct lock while counting channel queue length
The lock around counting the channel queue length in the BIODASDINFO
ioctl was incorrectly changed to the dasd_block->queue_lock with commit
583d6535cb9d ("dasd: remove dead code"). This can lead to endless list
iterations and a subsequent crash.
The queue_lock is supposed to be used only for queue lists belonging to
dasd_block. For dasd_device related queue lists the ccwdev lock must be
used.
Fix the mentioned issues by correctly using the ccwdev lock instead of
the queue lock.
Fixes:
583d6535cb9d ("dasd: remove dead code")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 9 Jun 2023 16:36:17 +0000 (09:36 -0700)]
Merge tag 'riscv-for-linus-6.4-rc6' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid ISA-disallowed privilege mappings that can result from
WRITE+EXEC mmap requests from userspace.
- A fix for kfence to handle the huge pages.
- A fix to avoid converting misaligned VAs to huge pages.
- ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE has been selected so kprobe
can understand user pointers.
* tag 'riscv-for-linus-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix kprobe __user string arg print fault issue
riscv: Check the virtual alignment before choosing a map size
riscv: Fix kfence now that the linear mapping can be backed by PUD/P4D/PGD
riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable
Linus Torvalds [Fri, 9 Jun 2023 16:29:51 +0000 (09:29 -0700)]
Merge tag 's390-6.4-3' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Avoid linker error for randomly generated config file that has
CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86
and also to commit
4bf3ec384edf ("s390: disable branch profiling for
vdso").
- Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
* tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/purgatory: disable branch profiling
s390/cio: unregister device when the only path is gone
Linus Torvalds [Fri, 9 Jun 2023 16:17:25 +0000 (09:17 -0700)]
Merge tag 'gpio-fixes-for-v6.4-rc6' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the GPIO testing module and one commit making Andy a
reviewer for the GPIO subsystem:
- fix a memory corruption bug in gpio-sim
- fix inconsistencies in user-space configuration of gpio-sim
- make Andy Shevchenko a reviewer for the GPIO subsystem"
* tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem
gpio: sim: quietly ignore configured lines outside the bank
gpio: sim: fix memory corruption when adding named lines and unnamed hogs
Ross Zwisler [Wed, 15 Feb 2023 22:33:49 +0000 (15:33 -0700)]
tools/virtio: use canonical ftrace path
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few spots in tools/virtio still refer to this older debugfs
path, so let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Message-Id: <
20230215223350.2658616-6-zwisler@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Shannon Nelson [Mon, 24 Apr 2023 22:50:31 +0000 (15:50 -0700)]
vhost_vdpa: support PACKED when setting-getting vring_base
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes:
4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <
20230424225031.18947-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Shannon Nelson [Mon, 24 Apr 2023 22:50:30 +0000 (15:50 -0700)]
vhost: support PACKED when setting-getting vring_base
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes:
4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <
20230424225031.18947-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Linus Torvalds [Fri, 9 Jun 2023 16:02:56 +0000 (09:02 -0700)]
Merge tag 'pinctrl-v6.4-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single fix for the Meson driver, nothing else has surfaced so far
this cycle"
* tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson-axg: add missing GPIOA_18 gpio group
Linus Torvalds [Fri, 9 Jun 2023 15:38:22 +0000 (08:38 -0700)]
Merge tag 'sound-6.4-rc6' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes, and almost all are device-specific.
A few of them are the fixes for the old regressions by the fast kctl
lookups (introduced around 5.19). Others are ASoC simple-card fixes,
selftest compile warning fixes, ASoC AMD quirks, various ASoC codec
fixes as well as usual HD-audio quirks"
* tag 'sound-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform
ALSA: hda: Fix kctl->id initialization
ALSA: gus: Fix kctl->id initialization
ALSA: cmipci: Fix kctl->id initialization
ALSA: ymfpci: Fix kctl->id initialization
ALSA: ice1712,ice1724: fix the kcontrol->id initialization
ALSA: hda/realtek: Add quirk for Clevo NS50AU
ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41
ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256
ALSA: hda/realtek: Add Lenovo P3 Tower platform
ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01
selftests: alsa: pcm-test: Fix compiler warnings about the format
ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted
ASoC: simple-card-utils: fix PCM constraint error check
ASoC: cs35l56: Remove NULL check from cs35l56_sdw_dai_set_stream()
ASoC: max98363: limit the number of channel to 1
ASoC: max98363: Removed 32bit support
ASoC: mediatek: mt8195: fix use-after-free in driver remove path
ASoC: mediatek: mt8188: fix use-after-free in driver remove path
ASoC: amd: yc: Add Thinkpad Neo14 to quirks list for acp6x
...
Linus Torvalds [Fri, 9 Jun 2023 15:23:01 +0000 (08:23 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix an ext4 regression which breaks remounting r/w file systems that
have the quota feature enabled"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: only check dquot_initialize_needed() when debugging
Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
Wolfram Sang [Fri, 9 Jun 2023 15:14:33 +0000 (17:14 +0200)]
Merge tag 'at24-fixes-for-v6.4-rc6' of git://git./linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v6.4-rc6
- fix a Kconfig issue (we need to select REGMAP, not only REGMAP_I2C)
Arnd Bergmann [Fri, 9 Jun 2023 12:15:18 +0000 (14:15 +0200)]
Merge tag 'imx-fixes-6.4-2' of git://git./linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.4, round 2:
- Fix SPI CS pinmux for the final production version of imx8mn-beacon
board.
- Fix GPIOs for USDHC2 CD and WP signals on imx8qm-mek board.
- Assign default clock rate for i.MX8 LPUARTs to fix UART failure.
* tag 'imx-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
Link: https://lore.kernel.org/r/20230607141312.GU4199@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Fri, 9 Jun 2023 02:14:10 +0000 (19:14 -0700)]
Merge tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit busier and a bit more scattered than usual. amdgpu is the main
one, with ivpu and msm having a few fixes, then i915, exynos, ast,
lima, radeon with some misc bits, but overall nothing standing out.
fb-helper:
- Fill in fb-helper vars more correctly
amdgpu:
- S0ix fixes
- GPU reset fixes
- SMU13 fixes
- SMU11 fixes
- Misc Display fixes
- Revert RV/RV2/PCO clock counter changes
- Fix Stoney xclk value
- Fix reserved vram debug info
radeon:
- Fix a potential use after free
i915:
- CDCLK voltage fix for ADL-P
- eDP wake sync pulse fix
- Two error handling fixes to selftests
exynos:
- Fix wrong return in Exynos vidi driver
- Fix use-after-free issue to Exynos g2d driver
ast:
- resume and modeset fixes for ast
ivpu:
- Assorted ivpu fixes
lima:
- lima context destroy fix
msm:
- Fix max segment size to address splat on newer a6xx
- Disable PSR by default w/ modparam to re-enable, since there still
seems to be a lingering issue
- Fix HPD issue
- Fix issue with unitialized GMU mutex"
* tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm: (32 commits)
drm/msm/a6xx: initialize GMU mutex earlier
drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
accel/ivpu: Fix sporadic VPU boot failure
accel/ivpu: Do not use mutex_lock_interruptible
accel/ivpu: Do not trigger extra VPU reset if the VPU is idle
drm/amd/display: Reduce sdp bw after urgent to 90%
drm/amdgpu: change reserved vram info print
drm/amdgpu: fix xclk freq on CHIP_STONEY
drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"
Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id"
Revert "drm/amdgpu: change the reference clock for raven/raven2"
drm/amd/display: add ODM case when looking for first split pipe
drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path
drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs
drm/amd/pm: Fix power context allocation in SMU13
drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram
drm/amd: Disallow s0ix without BIOS support again
drm/i915/selftests: Add some missing error propagation
drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl
...
Linus Torvalds [Fri, 9 Jun 2023 01:52:54 +0000 (18:52 -0700)]
Merge tag 'cgroup-for-6.4-rc5-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix css_set reference leaks on fork failures
- Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by
cgroup1 cpuset
- Doc update
* tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Documentation: Clarify usage of memory limits
cgroup: always put cset in cgroup_css_set_put_fork
cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks()
Dave Airlie [Fri, 9 Jun 2023 01:20:22 +0000 (11:20 +1000)]
Merge tag 'drm-msm-fixes-2023-06-08' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few more late fixes for v6.4-rc6
+ Fix max segment size to address splat on newer a6xx
+ Disable PSR by default w/ modparam to re-enable, since there
still seems to be a lingering issue
+ Fix HPD issue
+ Fix issue with unitialized GMU mutex
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGufjVZRNT6YfQ7YUXFC7Cz95wdLF7QHAYkiGfp+3Xc3DQ@mail.gmail.com
Dmitry Baryshkov [Mon, 10 Apr 2023 16:59:08 +0000 (19:59 +0300)]
drm/msm/a6xx: initialize GMU mutex earlier
Move GMU mutex initialization earlier to make sure that it is always
initialized. a6xx_destroy can be called from ther failure path before
GMU initialization.
This fixes the following backtrace:
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 58 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x3d0
Modules linked in:
CPU: 0 PID: 58 Comm: kworker/u16:1 Not tainted 6.3.0-rc5-00155-g187c06436519 #565
Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate:
60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0x1ec/0x3d0
lr : __mutex_lock+0x1ec/0x3d0
sp :
ffff800008993620
x29:
ffff800008993620 x28:
0000000000000002 x27:
ffff47b253c52800
x26:
0000000001000606 x25:
ffff47b240bb2810 x24:
fffffffffffffff4
x23:
0000000000000000 x22:
ffffc38bba15ac14 x21:
0000000000000002
x20:
ffff800008993690 x19:
ffff47b2430cc668 x18:
fffffffffffe98f0
x17:
6f74616c75676572 x16:
20796d6d75642067 x15:
0000000000000038
x14:
0000000000000000 x13:
ffffc38bbba050b8 x12:
0000000000000666
x11:
0000000000000222 x10:
ffffc38bbba603e8 x9 :
ffffc38bbba050b8
x8 :
00000000ffffefff x7 :
ffffc38bbba5d0b8 x6 :
0000000000000222
x5 :
000000000000bff4 x4 :
40000000fffff222 x3 :
0000000000000000
x2 :
0000000000000000 x1 :
0000000000000000 x0 :
ffff47b240cb1880
Call trace:
__mutex_lock+0x1ec/0x3d0
mutex_lock_nested+0x2c/0x38
a6xx_destroy+0xa0/0x138
a6xx_gpu_init+0x41c/0x618
adreno_bind+0x188/0x290
component_bind_all+0x118/0x248
msm_drm_bind+0x1c0/0x670
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x16c
component_add+0x14/0x20
dsi_dev_attach+0x20/0x2c
dsi_host_attach+0x9c/0x144
devm_mipi_dsi_attach+0x34/0xac
lt9611uxc_attach_dsi.isra.0+0x84/0xfc
lt9611uxc_probe+0x5b8/0x67c
i2c_device_probe+0x1ac/0x358
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x2bc/0x594
worker_thread+0x228/0x438
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
irq event stamp: 299345
hardirqs last enabled at (299345): [<
ffffc38bb9ba61e4>] put_cpu_partial+0x1c8/0x22c
hardirqs last disabled at (299344): [<
ffffc38bb9ba61dc>] put_cpu_partial+0x1c0/0x22c
softirqs last enabled at (296752): [<
ffffc38bb9890434>] _stext+0x434/0x4e8
softirqs last disabled at (296741): [<
ffffc38bb989669c>] ____do_softirq+0x10/0x1c
---[ end trace
0000000000000000 ]---
Fixes:
4cd15a3e8b36 ("drm/msm/a6xx: Make GPU destroy a bit safer")
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/531540/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Kuogee Hsieh [Tue, 23 May 2023 21:52:36 +0000 (14:52 -0700)]
drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
case. HDP related interrupts can not be enabled until internal_hpd is set
to true. At current implementation dp_display_config_hpd() will initialize
DP host controller first followed by enabling HDP related interrupts if
internal_hpd was true at that time. Enable HDP related interrupts depends on
internal_hpd status may leave system with DP driver host is in running state
but without HDP related interrupts being enabled. This will prevent external
display from being detected. Eliminated this dependency by moving HDP related
interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
regardless of internal_hpd status.
Changes in V3:
-- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
-- rewording ocmmit text
Changes in V4:
-- replace dp_display_config_hpd() with dp_display_host_start()
-- move enable_irq() at dp_display_host_start();
Changes in V5:
-- replace dp_display_host_start() with dp_display_host_init()
Changes in V6:
-- squash remove enable_irq() and disable_irq()
Fixes:
cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Dave Airlie [Fri, 9 Jun 2023 01:10:09 +0000 (11:10 +1000)]
Merge tag 'drm-misc-fixes-2023-06-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc6:
- resume and modeset fixes for ast.
- Fill in fb-helper vars more correctly.
- Assorted ivpu fixes.
- lima context destroy fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ea6b88ec-b653-3781-0b68-cd0275c27923@linux.intel.com
Dave Airlie [Fri, 9 Jun 2023 01:02:04 +0000 (11:02 +1000)]
Merge tag 'exynos-drm-fixes-for-v6.4-rc6' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- Fix wrong return in Exynos vidi driver.
- Fix use-after-free issue to Exynos g2d driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607043148.43303-1-inki.dae@samsung.com
Dave Airlie [Fri, 9 Jun 2023 00:57:26 +0000 (10:57 +1000)]
Merge tag 'drm-intel-fixes-2023-06-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
CDCLK voltage fix for ADL-P and eDP wake sync pulse fix.
Two error handling fixes to selftests (to appease static checkers)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZIGUHBz7+LsqN2nm@jlahtine-mobl.ger.corp.intel.com
Dave Airlie [Thu, 8 Jun 2023 23:19:56 +0000 (09:19 +1000)]
Merge tag 'amd-drm-fixes-6.4-2023-06-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.4-2023-06-07:
amdgpu:
- S0ix fixes
- GPU reset fixes
- SMU13 fixes
- SMU11 fixes
- Misc Display fixes
- Revert RV/RV2/PCO clock counter changes
- Fix Stoney xclk value
- Fix reserved vram debug info
radeon:
- Fix a potential use after free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607213740.7723-1-alexander.deucher@amd.com
Linus Torvalds [Thu, 8 Jun 2023 20:54:26 +0000 (13:54 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two tiny arm64 fixes for -rc6.
One fixes a build breakage when MAX_ORDER can be nonsensical if
CONFIG_EXPERT=y and the other fixes the address masking for perf's
page fault software events so that it is consistent amongst them:
- Fix build breakage due to bogus MAX_ORDER definitions on !4k pages
- Avoid masking fault address for perf software events"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: pass original fault address to handle_mm_fault() in PER_VMA_LOCK block
arm64: Remove the ARCH_FORCE_MAX_ORDER config input prompt
Mike Christie [Wed, 7 Jun 2023 19:23:38 +0000 (14:23 -0500)]
vhost: Fix worker hangs due to missed wake up calls
We can race where we have added work to the work_list, but
vhost_task_fn has passed that check but not yet set us into
TASK_INTERRUPTIBLE. wake_up_process will see us in TASK_RUNNING and
just return.
This bug was intoduced in commit
f9010dbdce91 ("fork, vhost: Use
CLONE_THREAD to fix freezer/ps regression") when I moved the setting
of TASK_INTERRUPTIBLE to simplfy the code and avoid get_signal from
logging warnings about being in the wrong state. This moves the setting
of TASK_INTERRUPTIBLE back to before we test if we need to stop the
task to avoid a possible race there as well. We then have vhost_worker
set TASK_RUNNING if it finds work similar to before.
Fixes:
f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <
20230607192338.6041-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mike Christie [Wed, 7 Jun 2023 19:23:37 +0000 (14:23 -0500)]
vhost: Fix crash during early vhost_transport_send_pkt calls
If userspace does VHOST_VSOCK_SET_GUEST_CID before VHOST_SET_OWNER we
can race where:
1. thread0 calls vhost_transport_send_pkt -> vhost_work_queue
2. thread1 does VHOST_SET_OWNER which calls vhost_worker_create.
3. vhost_worker_create will set the dev->worker pointer before setting
the worker->vtsk pointer.
4. thread0's vhost_work_queue will see the dev->worker pointer is
set and try to call vhost_task_wake using not yet set worker->vtsk
pointer.
5. We then crash since vtsk is NULL.
Before commit
6e890c5d5021 ("vhost: use vhost_tasks for worker
threads"), we only had the worker pointer so we could just check it to
see if VHOST_SET_OWNER has been done. After that commit we have the
vhost_worker and vhost_task pointer, so we can now hit the bug above.
This patch embeds the vhost_worker in the vhost_dev and moves the work
list initialization back to vhost_dev_init, so we can just check the
worker.vtsk pointer to check if VHOST_SET_OWNER has been done like
before.
Fixes:
6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <
20230607192338.6041-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: syzbot+d0d442c22fa8db45ff0e@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Andrey Smetanin [Mon, 24 Apr 2023 20:44:11 +0000 (23:44 +0300)]
vhost_net: revert upend_idx only on retriable error
Fix possible virtqueue used buffers leak and corresponding stuck
in case of temporary -EIO from sendmsg() which is produced by
tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx
to pass packet data (that is update used_idx in corresponding
vhost_zerocopy_signal_used()) as if packet data has been
transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN
in case of fake successful transmit.
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Message-Id: <
20230424204411.24888-1-asmetanin@yandex-team.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Acked-by: Jason Wang <jasowang@redhat.com>
Shannon Nelson [Mon, 24 Apr 2023 22:50:29 +0000 (15:50 -0700)]
vhost_vdpa: tell vqs about the negotiated
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs
know about the features that have been negotiated. This allows vhost
to more safely make decisions based on the features, such as when using
PACKED vs split queues.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <
20230424225031.18947-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Dragos Tatulea [Tue, 16 May 2023 09:58:01 +0000 (12:58 +0300)]
vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister
Currently the vdpa device is unregistered after the workqueue that
processes vq commands is disabled. However, the device unregister
process can still send commands to the cvq (a vlan delete for example)
which leads to a hang because the handing workqueue has been disabled
and the command never finishes:
[ 2263.095764] rcu: INFO: rcu_sched self-detected stall on CPU
[ 2263.096307] rcu: 9-....: (5250 ticks this GP) idle=dac4/1/0x4000000000000000 softirq=111009/111009 fqs=2544
[ 2263.097154] rcu: (t=5251 jiffies g=393549 q=347 ncpus=10)
[ 2263.097648] CPU: 9 PID: 94300 Comm: kworker/u20:2 Not tainted 6.3.0-rc6_for_upstream_min_debug_2023_04_14_00_02 #1
[ 2263.098535] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2263.099481] Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core]
[ 2263.100143] RIP: 0010:virtnet_send_command+0x109/0x170
[ 2263.100621] Code: 1d df f5 ff 85 c0 78 5c 48 8b 7b 08 e8 d0 c5 f5 ff 84 c0 75 11 eb 22 48 8b 7b 08 e8 01 b7 f5 ff 84 c0 75 15 f3 90 48 8b 7b 08 <48> 8d 74 24 04 e8 8d c5 f5 ff 48 85 c0 74 de 48 8b 83 f8 00 00 00
[ 2263.102148] RSP: 0018:
ffff888139cf36e8 EFLAGS:
00000246
[ 2263.102624] RAX:
0000000000000000 RBX:
ffff888166bea940 RCX:
0000000000000001
[ 2263.103244] RDX:
0000000000000000 RSI:
ffff888139cf36ec RDI:
ffff888146763800
[ 2263.103864] RBP:
ffff888139cf3710 R08:
ffff88810d201000 R09:
0000000000000000
[ 2263.104473] R10:
0000000000000002 R11:
0000000000000003 R12:
0000000000000002
[ 2263.105082] R13:
0000000000000002 R14:
ffff888114528400 R15:
ffff888166bea000
[ 2263.105689] FS:
0000000000000000(0000) GS:
ffff88852cc80000(0000) knlGS:
0000000000000000
[ 2263.106404] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2263.106925] CR2:
00007f31f394b000 CR3:
000000010615b006 CR4:
0000000000370ea0
[ 2263.107542] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 2263.108163] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 2263.108769] Call Trace:
[ 2263.109059] <TASK>
[ 2263.109320] ? check_preempt_wakeup+0x11f/0x230
[ 2263.109750] virtnet_vlan_rx_kill_vid+0x5a/0xa0
[ 2263.110180] vlan_vid_del+0x9c/0x170
[ 2263.110546] vlan_device_event+0x351/0x760 [8021q]
[ 2263.111004] raw_notifier_call_chain+0x41/0x60
[ 2263.111426] dev_close_many+0xcb/0x120
[ 2263.111808] unregister_netdevice_many_notify+0x130/0x770
[ 2263.112297] ? wq_worker_running+0xa/0x30
[ 2263.112688] unregister_netdevice_queue+0x89/0xc0
[ 2263.113128] unregister_netdev+0x18/0x20
[ 2263.113512] virtnet_remove+0x4f/0x230
[ 2263.113885] virtio_dev_remove+0x31/0x70
[ 2263.114273] device_release_driver_internal+0x18f/0x1f0
[ 2263.114746] bus_remove_device+0xc6/0x130
[ 2263.115146] device_del+0x173/0x3c0
[ 2263.115502] ? kernfs_find_ns+0x35/0xd0
[ 2263.115895] device_unregister+0x1a/0x60
[ 2263.116279] unregister_virtio_device+0x11/0x20
[ 2263.116706] device_release_driver_internal+0x18f/0x1f0
[ 2263.117182] bus_remove_device+0xc6/0x130
[ 2263.117576] device_del+0x173/0x3c0
[ 2263.117929] ? vdpa_dev_remove+0x20/0x20 [vdpa]
[ 2263.118364] device_unregister+0x1a/0x60
[ 2263.118752] mlx5_vdpa_dev_del+0x4c/0x80 [mlx5_vdpa]
[ 2263.119232] vdpa_match_remove+0x21/0x30 [vdpa]
[ 2263.119663] bus_for_each_dev+0x71/0xc0
[ 2263.120054] vdpa_mgmtdev_unregister+0x57/0x70 [vdpa]
[ 2263.120520] mlx5v_remove+0x12/0x20 [mlx5_vdpa]
[ 2263.120953] auxiliary_bus_remove+0x18/0x30
[ 2263.121356] device_release_driver_internal+0x18f/0x1f0
[ 2263.121830] bus_remove_device+0xc6/0x130
[ 2263.122223] device_del+0x173/0x3c0
[ 2263.122581] ? devl_param_driverinit_value_get+0x29/0x90
[ 2263.123070] mlx5_rescan_drivers_locked+0xc4/0x2d0 [mlx5_core]
[ 2263.123633] mlx5_unregister_device+0x54/0x80 [mlx5_core]
[ 2263.124169] mlx5_uninit_one+0x54/0x150 [mlx5_core]
[ 2263.124656] mlx5_sf_dev_remove+0x45/0x90 [mlx5_core]
[ 2263.125153] auxiliary_bus_remove+0x18/0x30
[ 2263.125560] device_release_driver_internal+0x18f/0x1f0
[ 2263.126052] bus_remove_device+0xc6/0x130
[ 2263.126451] device_del+0x173/0x3c0
[ 2263.126815] mlx5_sf_dev_remove+0x39/0xf0 [mlx5_core]
[ 2263.127318] mlx5_sf_dev_state_change_handler+0x178/0x270 [mlx5_core]
[ 2263.127920] blocking_notifier_call_chain+0x5a/0x80
[ 2263.128379] mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core]
[ 2263.128951] process_one_work+0x1bb/0x3c0
[ 2263.129355] ? process_one_work+0x3c0/0x3c0
[ 2263.129766] worker_thread+0x4d/0x3c0
[ 2263.130140] ? process_one_work+0x3c0/0x3c0
[ 2263.130548] kthread+0xb9/0xe0
[ 2263.130895] ? kthread_complete_and_exit+0x20/0x20
[ 2263.131349] ret_from_fork+0x1f/0x30
[ 2263.131717] </TASK>
The fix is to disable and destroy the workqueue after the device
unregister. It is expected that vhost will not trigger kicks after
the unregister. But even if it would, the wq is disabled already by
setting the pointer to NULL (done so in the referenced commit).
Fixes:
ad6dc1daaf29 ("vdpa/mlx5: Avoid processing works if workqueue was destroyed")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <
20230516095800.3549932-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Rong Tao [Thu, 25 May 2023 08:37:28 +0000 (16:37 +0800)]
tools/virtio: Add .gitignore for ringtest
Ignore executables for ringtest.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_C121802C93CB4095C6D7D95113442E830A07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rong Tao [Wed, 24 May 2023 12:31:24 +0000 (20:31 +0800)]
tools/virtio: Fix arm64 ringtest compilation error
Add cpu_relax() for arm64 instead of directly assert(), and add assert.h
header file. Also, add smp_wmb and smp_mb for arm64.
Compilation error as follows, avoid __always_inline undefined.
$ make
cc -Wall -pthread -O2 -ggdb -flto -fwhole-program -c -o ring.o ring.c
In file included from ring.c:10:
main.h: In function ‘busy_wait’:
main.h:99:21: warning: implicit declaration of function ‘assert’
[-Wimplicit-function-declaration]
99 | #define cpu_relax() assert(0)
| ^~~~~~
main.h:107:17: note: in expansion of macro ‘cpu_relax’
107 | cpu_relax();
| ^~~~~~~~~
main.h:12:1: note: ‘assert’ is defined in header ‘<assert.h>’; did you
forget to ‘#include <assert.h>’?
11 | #include <stdbool.h>
+++ |+#include <assert.h>
12 |
main.h: At top level:
main.h:143:23: error: expected ‘;’ before ‘void’
143 | static __always_inline
| ^
| ;
144 | void __read_once_size(const volatile void *p, void *res, int
size)
| ~~~~
main.h:158:23: error: expected ‘;’ before ‘void’
158 | static __always_inline void __write_once_size(volatile void *p,
void *res, int size)
| ^~~~~
| ;
make: *** [<builtin>: ring.o] Error 1
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_F53E159DD7925174445D830DA19FACF44B07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sheng Zhao [Tue, 30 May 2023 03:36:26 +0000 (11:36 +0800)]
vduse: avoid empty string for dev name
Syzkaller hits a kernel WARN when the first character of the dev name
provided is NULL. Solution is to add a NULL check before calling
cdev_device_add() in vduse_create_dev().
kobject: (
0000000072042169): attempted to be registered with empty name!
WARNING: CPU: 0 PID: 112695 at lib/kobject.c:236
Call Trace:
kobject_add_varg linux/src/lib/kobject.c:390 [inline]
kobject_add+0xf6/0x150 linux/src/lib/kobject.c:442
device_add+0x28f/0xc20 linux/src/drivers/base/core.c:2167
cdev_device_add+0x83/0xc0 linux/src/fs/char_dev.c:546
vduse_create_dev linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2254 [inline]
vduse_ioctl+0x7b5/0xf30 linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2316
vfs_ioctl linux/src/fs/ioctl.c:47 [inline]
file_ioctl linux/src/fs/ioctl.c:510 [inline]
do_vfs_ioctl+0x14b/0xa80 linux/src/fs/ioctl.c:697
ksys_ioctl+0x7c/0xa0 linux/src/fs/ioctl.c:714
__do_sys_ioctl linux/src/fs/ioctl.c:721 [inline]
__se_sys_ioctl linux/src/fs/ioctl.c:719 [inline]
__x64_sys_ioctl+0x42/0x50 linux/src/fs/ioctl.c:719
do_syscall_64+0x94/0x330 linux/src/arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Cc: "Xie Yongji" <xieyongji@bytedance.com>
Reported-by: Xianjun Zeng <zengxianjun@bytedance.com>
Signed-off-by: Sheng Zhao <sheng.zhao@bytedance.com>
Message-Id: <
20230530033626.1266794-1-sheng.zhao@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Cc: "Michael S. Tsirkin"<mst@redhat.com>, "Jason Wang"<jasowang@redhat.com>,
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Biju Das [Wed, 7 Jun 2023 17:07:29 +0000 (18:07 +0100)]
MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
Add the MAINTAINERS entries for the Renesas RZ/V2M I2C driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Ruan Jinjie [Thu, 4 May 2023 07:29:10 +0000 (15:29 +0800)]
riscv: fix kprobe __user string arg print fault issue
On riscv qemu platform, when add kprobe event on do_sys_open() to show
filename string arg, it just print fault as follow:
echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3
mode=$arg4' > kprobe_events
bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0
As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE,
the +0($arg2) addr is processed as a kernel address though it is a
userspace address, cause the above filename=(fault) print. So select
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the
kprobe trace is ok as below:
bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/"
flags=0x98800 mode=0x0
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Fixes:
0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Linus Torvalds [Thu, 8 Jun 2023 16:27:19 +0000 (09:27 -0700)]
Merge tag 'net-6.4-rc6' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, wifi, netfilter, bluetooth and ebpf.
Current release - regressions:
- bpf: sockmap: avoid potential NULL dereference in
sk_psock_verdict_data_ready()
- wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()
- phylink: actually fix ksettings_set() ethtool call
- eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3
Current release - new code bugs:
- wifi: mt76: fix possible NULL pointer dereference in
mt7996_mac_write_txwi()
Previous releases - regressions:
- netfilter: fix NULL pointer dereference in nf_confirm_cthelper
- wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
- openvswitch: fix upcall counter access before allocation
- bluetooth:
- fix use-after-free in hci_remove_ltk/hci_remove_irk
- fix l2cap_disconnect_req deadlock
- nic: bnxt_en: prevent kernel panic when receiving unexpected
PHC_UPDATE event
Previous releases - always broken:
- core: annotate rfs lockless accesses
- sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values
- netfilter: add null check for nla_nest_start_noflag() in
nft_dump_basechain_hook()
- bpf: fix UAF in task local storage
- ipv4: ping_group_range: allow GID from
2147483648 to
4294967294
- ipv6: rpl: fix route of death.
- tcp: gso: really support BIG TCP
- mptcp: fixes for user-space PM address advertisement
- smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT
- can: avoid possible use-after-free when j1939_can_rx_register fails
- batman-adv: fix UaF while rescheduling delayed work
- eth: qede: fix scheduling while atomic
- eth: ice: make writes to /dev/gnssX synchronous"
* tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event
bnxt_en: Skip firmware fatal error recovery if chip is not accessible
bnxt_en: Query default VLAN before VNIC setup on a VF
bnxt_en: Don't issue AP reset during ethtool's reset operation
bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()
net: bcmgenet: Fix EEE implementation
eth: ixgbe: fix the wake condition
eth: bnxt: fix the wake condition
lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
bpf: Add extra path pointer check to d_path helper
net: sched: fix possible refcount leak in tc_chain_tmplt_add()
net: sched: act_police: fix sparse errors in tcf_police_dump()
net: openvswitch: fix upcall counter access before allocation
net: sched: move rtm_tca_policy declaration to include file
ice: make writes to /dev/gnssX synchronous
net: sched: add rcu annotations around qdisc->qdisc_sleeping
rfs: annotate lockless accesses to RFS sock flow table
rfs: annotate lockless accesses to sk->sk_rxhash
virtio_net: use control_buf for coalesce params
...
Linus Torvalds [Thu, 8 Jun 2023 15:46:58 +0000 (08:46 -0700)]
Merge tag 'xfs-6.4-rc5-fixes' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Dave Chinner:
"These are a set of regression fixes discovered on recent kernels. I
was hoping to send this to you a week and half ago, but events out of
my control delayed finalising the changes until early this week.
Whilst the diffstat looks large for this stage of the merge window, a
large chunk of it comes from moving the guts of one function from one
file to another i.e. it's the same code, it is just run in a different
context where it is safe to hold a specific lock. Otherwise the
individual changes are relatively small and straigtht forward.
Summary:
- Propagate unlinked inode list corruption back up to log recovery
(regression fix)
- improve corruption detection for AGFL entries, AGFL indexes and
XEFI extents (syzkaller fuzzer oops report)
- Avoid double perag reference release (regression fix)
- Improve extent merging detection in scrub (regression fix)
- Fix a new undefined high bit shift (regression fix)
- Fix for AGF vs inode cluster buffer deadlock (regression fix)"
* tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: collect errors from inodegc for unlinked inode recovery
xfs: validate block number being freed before adding to xefi
xfs: validity check agbnos on the AGFL
xfs: fix agf/agfl verification on v4 filesystems
xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag()
xfs: fix broken logic when detecting mergeable bmap records
xfs: Fix undefined behavior of shift into sign bit
xfs: fix AGF vs inode cluster buffer deadlock
xfs: defered work could create precommits
xfs: restore allocation trylock iteration
xfs: buffer pins need to hold a buffer reference
Theodore Ts'o [Thu, 8 Jun 2023 14:06:40 +0000 (10:06 -0400)]
ext4: only check dquot_initialize_needed() when debugging
ext4_xattr_block_set() relies on its caller to call dquot_initialize()
on the inode. To assure that this has happened there are WARN_ON
checks. Unfortunately, this is subject to false positives if there is
an antagonist thread which is flipping the file system at high rates
between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is
enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Theodore Ts'o [Thu, 8 Jun 2023 13:57:04 +0000 (09:57 -0400)]
Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
This reverts commit
a44be64bbecb15a452496f60db6eacfee2b59c79.
Link: https://lore.kernel.org/r/653b3359-2005-21b1-039d-c55ca4cffdcc@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Charles Keepax [Fri, 2 Jun 2023 10:11:36 +0000 (11:11 +0100)]
soundwire: stream: Add missing clear of alloc_slave_rt
The current path that skips allocating the slave runtime does not clear
the alloc_slave_rt flag, this is clearly incorrect. Add the missing
clear, so the runtime won't be erroneously cleaned up.
Fixes:
f3016b891c8c ("soundwire: stream: sdw_stream_add_ functions can be called multiple times")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Paolo Abeni [Thu, 8 Jun 2023 08:52:48 +0000 (10:52 +0200)]
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes
This patchset has the following fixes for bnxt_en:
1. Add missing VNIC ID parameter in the FW message when getting an
updated RSS configuration from the FW.
2. Fix a warning when doing ethtool reset on newer chips.
3. Fix VLAN issue on a VF when a default VLAN is assigned.
4. Fix a problem during DPC (Downstream Port containment) scenario.
5. Fix a NULL pointer dereference when receiving a PTP event from FW.
6. Fix VXLAN/Geneve UDP port delete/add with newer FW.
====================
Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Somnath Kotur [Wed, 7 Jun 2023 07:54:09 +0000 (00:54 -0700)]
bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
As per the new udp tunnel framework, drivers which need to know the
details of a port entry (i.e. port type) when it gets deleted should
use the .set_port / .unset_port callbacks.
Implementing the current .udp_tunnel_sync callback would mean that the
deleted tunnel port entry would be all zeros. This used to work on
older firmware because it would not check the input when deleting a
tunnel port. With newer firmware, the delete will now fail and
subsequent tunnel port allocation will fail as a result.
Fixes:
442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pavan Chebbi [Wed, 7 Jun 2023 07:54:08 +0000 (00:54 -0700)]
bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event
The firmware can send PHC_RTC_UPDATE async event on a PF that may not
have PTP registered. In such a case, there will be a null pointer
deference for bp->ptp_cfg when we try to handle the event.
Fix it by not registering for this event with the firmware if !bp->ptp_cfg.
Also, check that bp->ptp_cfg is valid before proceeding when we receive
the event.
Fixes:
8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode")
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vikas Gupta [Wed, 7 Jun 2023 07:54:07 +0000 (00:54 -0700)]
bnxt_en: Skip firmware fatal error recovery if chip is not accessible
Driver starts firmware fatal error recovery by detecting
heartbeat failure or fw reset count register changing. But
these checks are not reliable if the device is not accessible.
This can happen while DPC (Downstream Port containment) is in
progress. Skip firmware fatal recovery if pci_device_is_present()
returns false.
Fixes:
acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Somnath Kotur [Wed, 7 Jun 2023 07:54:06 +0000 (00:54 -0700)]
bnxt_en: Query default VLAN before VNIC setup on a VF
We need to call bnxt_hwrm_func_qcfg() on a VF to query the default
VLAN that may be setup by the PF. If a default VLAN is enabled,
the VF cannot support VLAN acceleration on the receive side and
the VNIC must be setup to strip out the default VLAN tag. If a
default VLAN is not enabled, the VF can support VLAN acceleration
on the receive side. The VNIC should be set up to strip or not
strip the VLAN based on the RX VLAN acceleration setting.
Without this call to determine the default VLAN before calling
bnxt_setup_vnic(), the VNIC may not be set up correctly. For
example, bnxt_setup_vnic() may set up to strip the VLAN tag based
on stale default VLAN information. If RX VLAN acceleration is
not enabled, the VLAN tag will be incorrectly stripped and the
RX data path will not work correctly.
Fixes:
cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sreekanth Reddy [Wed, 7 Jun 2023 07:54:05 +0000 (00:54 -0700)]
bnxt_en: Don't issue AP reset during ethtool's reset operation
Only older NIC controller's firmware uses the PROC AP reset type.
Firmware on 5731X/5741X and newer chips does not support this reset
type. When bnxt_reset() issues a series of resets, this PROC AP
reset may actually fail on these newer chips because the firmware
is not ready to accept this unsupported command yet. Avoid this
unnecessary error by skipping this reset type on chips that don't
support it.
Fixes:
7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pavan Chebbi [Wed, 7 Jun 2023 07:54:04 +0000 (00:54 -0700)]
bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()
We must specify the vnic id of the vnic in the input structure of this
firmware message. Otherwise we will get an error from the firmware.
Fixes:
98a4322b70e8 ("bnxt_en: update RSS config using difference algorithm")
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Randy Dunlap [Thu, 8 Jun 2023 02:54:24 +0000 (19:54 -0700)]
eeprom: at24: also select REGMAP
Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.
../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration
540 | struct regmap_config *regmap_config)
../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client':
../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config);
../drivers/misc/eeprom/at24.c: In function 'at24_probe':
../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type
586 | struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known
586 | struct regmap_config regmap_config = { };
../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable]
Fixes:
5c015258478e ("eeprom: at24: add basic regmap_i2c support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Xiubo Li [Thu, 1 Jun 2023 00:59:31 +0000 (08:59 +0800)]
ceph: fix use-after-free bug for inodes when flushing capsnaps
There is a race between capsnaps flush and removing the inode from
'mdsc->snap_flush_list' list:
== Thread A == == Thread B ==
ceph_queue_cap_snap()
-> allocate 'capsnapA'
->ihold('&ci->vfs_inode')
->add 'capsnapA' to 'ci->i_cap_snaps'
->add 'ci' to 'mdsc->snap_flush_list'
...
== Thread C ==
ceph_flush_snaps()
->__ceph_flush_snaps()
->__send_flush_snap()
handle_cap_flushsnap_ack()
->iput('&ci->vfs_inode')
this also will release 'ci'
...
== Thread D ==
ceph_handle_snap()
->flush_snaps()
->iterate 'mdsc->snap_flush_list'
->get the stale 'ci'
->remove 'ci' from ->ihold(&ci->vfs_inode) this
'mdsc->snap_flush_list' will WARNING
To fix this we will increase the inode's i_count ref when adding 'ci'
to the 'mdsc->snap_flush_list' list.
[ idryomov: need_put int -> bool ]
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Andrzej Kacprowski [Wed, 7 Jun 2023 09:45:02 +0000 (11:45 +0200)]
accel/ivpu: Fix sporadic VPU boot failure
Wait for AON bit in HOST_SS_CPR_RST_CLR to return 0 before
starting VPUIP power up sequence, otherwise the VPU device
may sporadically fail to boot.
An error in power up sequence is propagated to the runtime
power management - the device will be in an error state
until the VPU driver is reloaded.
Fixes:
35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607094502.388489-1-stanislaw.gruszka@linux.intel.com
Stanislaw Gruszka [Thu, 25 May 2023 10:38:18 +0000 (12:38 +0200)]
accel/ivpu: Do not use mutex_lock_interruptible
If we get signal when waiting for the mmu->lock we do not invalidate
current MMU configuration that might result in undefined behavior.
Additionally there is little or no benefit on break waiting for
ipc->lock. In current code base, we keep this lock for short periods.
Fixes:
263b2ba5fc93 ("accel/ivpu: Add Intel VPU MMU support")
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-2-stanislaw.gruszka@linux.intel.com
Andrzej Kacprowski [Thu, 25 May 2023 10:38:17 +0000 (12:38 +0200)]
accel/ivpu: Do not trigger extra VPU reset if the VPU is idle
Turning off the PLL and entering D0i3 will reset the VPU so
an explicit IP reset is redundant.
But if the VPU is active, it may interfere with PLL disabling
and to avoid that, we have to issue an additional IP reset
to silence the VPU before turning off the PLL.
Fixes:
a8fed6d1e0b9 ("accel/ivpu: Fix power down sequence")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525103818.877590-1-stanislaw.gruszka@linux.intel.com
Jakub Kicinski [Thu, 8 Jun 2023 04:56:01 +0000 (21:56 -0700)]
Merge tag 'batadv-net-pullrequest-
20230607' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix a broken sync while rescheduling delayed work,
by Vladislav Efanov
* tag 'batadv-net-pullrequest-
20230607' of git://git.open-mesh.org/linux-merge:
batman-adv: Broken sync while rescheduling delayed work
====================
Link: https://lore.kernel.org/r/20230607155515.548120-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Fainelli [Tue, 6 Jun 2023 21:43:47 +0000 (14:43 -0700)]
net: bcmgenet: Fix EEE implementation
We had a number of short comings:
- EEE must be re-evaluated whenever the state machine detects a link
change as wight be switching from a link partner with EEE
enabled/disabled
- tx_lpi_enabled controls whether EEE should be enabled/disabled for the
transmit path, which applies to the TBUF block
- We do not need to forcibly enable EEE upon system resume, as the PHY
state machine will trigger a link event that will do that, too
Fixes:
6ef398ea60d9 ("net: bcmgenet: add EEE support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 7 Jun 2023 01:08:26 +0000 (18:08 -0700)]
eth: ixgbe: fix the wake condition
Flip the netif_carrier_ok() condition in queue wake logic.
When I moved it to inside __netif_txq_completed_wake()
I missed negating it.
This made the condition ineffective and could probably
lead to crashes.
Fixes:
301f227fc860 ("net: piggy back on the memory barrier in bql when waking queues")
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 7 Jun 2023 01:08:25 +0000 (18:08 -0700)]
eth: bnxt: fix the wake condition
The down condition should be the negation of the wake condition,
IOW when I moved it from:
if (cond && wake())
to
if (__netif_txq_completed_wake(cond))
Cond should have been negated. Flip it now.
This bug leads to occasional crashes with netconsole.
It may also lead to queue never waking up in case BQL is not enabled.
Reported-by: David Wei <davidhwei@meta.com>
Fixes:
08a096780d92 ("bnxt: use new queue try_stop/try_wake macros")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 8 Jun 2023 04:47:11 +0000 (21:47 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-07
We've added 7 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 112 insertions(+), 7 deletions(-).
The main changes are:
1) Fix a use-after-free in BPF's task local storage, from KP Singh.
2) Make struct path handling more robust in bpf_d_path, from Jiri Olsa.
3) Fix a syzbot NULL-pointer dereference in sockmap, from Eric Dumazet.
4) UAPI fix for BPF_NETFILTER before final kernel ships,
from Florian Westphal.
5) Fix map-in-map array_map_gen_lookup code generation where elem_size was
not being set for inner maps, from Rhys Rustad-Elliott.
6) Fix sockopt_sk selftest's NETLINK_LIST_MEMBERSHIPS assertion,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add extra path pointer check to d_path helper
selftests/bpf: Fix sockopt_sk selftest
bpf: netfilter: Add BPF_NETFILTER bpf_attach_type
selftests/bpf: Add access_inner_map selftest
bpf: Fix elem_size not being set for inner maps
bpf: Fix UAF in task local storage
bpf, sockmap: Avoid potential NULL dereference in sk_psock_verdict_data_ready()
====================
Link: https://lore.kernel.org/r/20230607220514.29698-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ben Hutchings [Fri, 2 Jun 2023 18:28:15 +0000 (20:28 +0200)]
lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap.
So we need to clear the pointer to our glue structure in rmap before
doing that, not after.
Fixes:
4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alvin Lee [Fri, 19 May 2023 15:38:15 +0000 (11:38 -0400)]
drm/amd/display: Reduce sdp bw after urgent to 90%
[Description]
Reduce expected SDP bandwidth due to poor QoS and
arbitration issues on high bandwidth configs
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YiPeng Chai [Wed, 24 May 2023 09:14:15 +0000 (17:14 +0800)]
drm/amdgpu: change reserved vram info print
The link object of mgr->reserved_pages is the blocks
variable in struct amdgpu_vram_reservation, not the
link variable in struct drm_buddy_block.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Chia-I Wu [Thu, 1 Jun 2023 21:48:08 +0000 (14:48 -0700)]
drm/amdgpu: fix xclk freq on CHIP_STONEY
According to Alex, most APUs from that time seem to have the same issue
(vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I
limit the fixup to CHIP_STONEY
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Min Li [Sat, 3 Jun 2023 07:43:45 +0000 (15:43 +0800)]
drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:37:13 +0000 (14:37 -0400)]
Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"
This reverts commit
f03eb1d26c2739b75580f58bbab4ab2d5d3eba46.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:34:12 +0000 (14:34 -0400)]
Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id"
This reverts commit
9d2d1827af295fd6971786672c41c4dba3657154.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 2 Jun 2023 18:32:55 +0000 (14:32 -0400)]
Revert "drm/amdgpu: change the reference clock for raven/raven2"
This reverts commit
fbc24293ca16b3b9ef891fe32ccd04735a6f8dc1.
This results in inconsistent timing reported via asynchronous
GPU queries.
Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Tue, 9 May 2023 20:40:19 +0000 (16:40 -0400)]
drm/amd/display: add ODM case when looking for first split pipe
[Why]
When going from ODM 2:1 single display case to max displays, second
odm pipe needs to be repurposed for one of the new single displays.
However, acquire_first_split_pipe() only handles MPC case and not
ODM case
[How]
Add ODM conditions in acquire_first_split_pipe()
Add commit_minimal_transition_state() in commit_streams() to handle
odm 2:1 exit first, and then process new streams
Handle ODM condition in commit_minimal_transition_state()
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 30 May 2023 17:44:30 +0000 (12:44 -0500)]
drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path
Users have reported that s2idle wasn't working on OEM Phoenix systems,
but it was root caused to be because `CONFIG_AMD_PMC` wasn't set in
the distribution kernel config.
To make this more apparent, raise the messaging to err instead of warn.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217497
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 6 Apr 2023 04:08:21 +0000 (12:08 +0800)]
drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs
Disable the pcie lane switching for some sienna_cichlid SKUs since it
might not work well on some platforms.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Lijo Lazar [Fri, 31 Mar 2023 11:00:01 +0000 (16:30 +0530)]
drm/amd/pm: Fix power context allocation in SMU13
Use the right data structure for allocation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Horatio Zhang [Mon, 29 May 2023 18:23:37 +0000 (14:23 -0400)]
drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram
Use the function of amdgpu_bo_vm_destroy to handle the resource release
of shadow bo. During the amdgpu_mes_self_test, shadow bo released, but
vmbo->shadow_list was not, which caused a null pointer reference error
in amdgpu_device_recover_vram when GPU reset.
Fixes:
6c032c37ac3e ("drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Limonciello [Tue, 30 May 2023 16:57:59 +0000 (11:57 -0500)]
drm/amd: Disallow s0ix without BIOS support again
commit
cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") showed
improvements to power consumption over suspend when s0ix wasn't enabled in
BIOS and the system didn't support S3.
This patch however was misguided because the reason the system didn't
support S3 was because SMT was disabled in OEM BIOS setup.
This prevented the BIOS from allowing S3.
Also allowing GPUs to use the s2idle path actually causes problems if
they're invoked on systems that may not support s2idle in the platform
firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails
for any reason, which could lead to unexpected flows.
The original commit also fixed a problem during resume from suspend to idle
without hardware support, but this is no longer necessary with commit
ca4751866397 ("drm/amd: Don't allow s0ix on APUs older than Raven")
Revert commit
cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support")
to make it match the expected behavior again.
Cc: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Linus Torvalds [Wed, 7 Jun 2023 20:49:42 +0000 (13:49 -0700)]
Merge tag 'input-for-v6.4-rc5' of git://git./linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for unbalanced open count for inhibited input devices
- fixups in Elantech PS/2 and Cyppress TTSP v5 drivers
- a quirk to soc_button_array driver to make it work with Lenovo
Yoga Book X90F / X90L
- a removal of erroneous entry from xpad driver
* tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - delete a Razer DeathAdder mouse VID/PID entry
Input: psmouse - fix OOB access in Elantech protocol
Input: soc_button_array - add invalid acpi_index DMI quirk handling
Input: fix open count when closing inhibited device
Input: cyttsp5 - fix array length
Prathu Baronia [Mon, 22 May 2023 08:50:19 +0000 (14:20 +0530)]
vhost: use kzalloc() instead of kmalloc() followed by memset()
Use kzalloc() to allocate new zeroed out msg node instead of
memsetting a node allocated with kmalloc().
Signed-off-by: Prathu Baronia <prathubaronia2011@gmail.com>
Message-Id: <
20230522085019.42914-1-prathubaronia2011@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Thomas Gleixner [Tue, 6 Jun 2023 23:14:05 +0000 (01:14 +0200)]
MAINTAINERS: Add entry for debug objects
This is overdue and an oversight.
Add myself to this file deespite the fact that I'm trying to reduce the
number of entries in this file which have my name attached, but in the
hope that patches wont get picked up elsewhere completely unreviewed and
unnoticed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Wed, 7 Jun 2023 08:47:13 +0000 (09:47 +0100)]
afs: Fix setting of mtime when creating a file/dir/symlink
kafs incorrectly passes a zero mtime (ie. 1st Jan 1970) to the server when
creating a file, dir or symlink because the mtime recorded in the
afs_operation struct gets passed to the server by the marshalling routines,
but the afs_mkdir(), afs_create() and afs_symlink() functions don't set it.
This gets masked if a file or directory is subsequently modified.
Fix this by filling in op->mtime before calling the create op.
Fixes:
e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Ghiti [Wed, 7 Jun 2023 12:58:51 +0000 (14:58 +0200)]
riscv: Check the virtual alignment before choosing a map size
We used to only check the alignment of the physical address to decide
which mapping would fit for a certain region of the linear mapping, but
it is not enough since the virtual address must also be aligned, so check
that too.
Fixes:
3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")
Reported-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/linux-riscv/tencent_7C3B580B47C1B17C16488EC1@qq.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230607125851.63370-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
projects / platform / kernel / linux-starfive.git / log