subdev/clk: fix repeated words in comments

 Delete the redundant word 'at'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220821143038.46589-1-wangjianli@cdjrlc.com

drm/nouveau/hwmon: use simplified HWMON_CHANNEL_INFO macro

This makes the code look cleaner and easier to read.

Signed-off-by: Beniamin Sandu <beniaminsandu@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220815104028.381271-1-beniaminsandu@gmail.com

drm/panel-edp: add AUO B133UAN02.1 panel entry

Add an eDP panel entry for AUO B133UAN02.1.

Due to lack of documentation, use the delay_200_500_e50 timings like
some other AUO entries for now.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711075202.21775-1-johan+linaro@kernel.org

drm/lcdif: switch to devm_drm_of_get_bridge

The function "drm_of_find_panel_or_bridge" has been deprecated in
favor of "devm_drm_of_get_bridge".

Switch to the new function and reduce boilerplate.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reported-by: Liu Ying <victor.liu@oss.nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 9db35bb349a0e ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819140852.255187-4-marex@denx.de

drm/lcdif: Clean up debug prints and comments

Update debug print to report bridge timings over connector ones.
Drop missed comment commit from mxsfb.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reported-by: Liu Ying <victor.liu@oss.nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 9db35bb349a0e ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819140852.255187-3-marex@denx.de

drm/lcdif: Consistently use plain timings

Drop the crtc_ prefix from mode, consistently use the plain one.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reported-by: Liu Ying <victor.liu@oss.nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 9db35bb349a0e ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819140852.255187-2-marex@denx.de

drm/lcdif: Clean up headers

Drop unneeded headers, sort rest alphabetically, no functional change.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Reported-by: Liu Ying <victor.liu@oss.nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Fixes: 9db35bb349a0e ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liu Ying <victor.liu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Robby Cai <robby.cai@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819140852.255187-1-marex@denx.de

drm/ttm: Switch to using the new res callback

Apply new intersect and compatible callback instead
of having a generic placement range verfications.

v2: Added a separate callback for compatiblilty
    checks (Christian)
v3: Cleanups and removal of workarounds

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-6-Arunpravin.PaneerSelvam@amd.com

drm/nouveau: Implement intersect/compatible functions

Implemented a new intersect and compatible callback function
fetching the start offset from struct ttm_resource.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-5-Arunpravin.PaneerSelvam@amd.com

drm/i915: Implement intersect/compatible functions

Implemented a new intersect and compatible callback function
fetching start offset from drm buddy allocator.

v3: move the bits that are specific to buddy_man (Matthew)
v4: consider the block size /range (Matthew)

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-4-Arunpravin.PaneerSelvam@amd.com

drm/amdgpu: Implement intersect/compatible functions

Implemented a new intersect and compatible callback function
fetching start offset from backend drm buddy allocator.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-3-Arunpravin.PaneerSelvam@amd.com

drm/ttm: Implement intersect/compatible functions

Implemented a new intersect and compatible callback functions
to ttm range manager fetching start offset from drm mm range
allocator.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-2-Arunpravin.PaneerSelvam@amd.com

drm/ttm: Add new callbacks to ttm res mgr

We are adding two new callbacks to ttm resource manager
function to handle intersection and compatibility of
placement and resources.

v2: move the amdgpu and ttm_range_manager changes to
    separate patches (Christian)
v3: rename "intersect" to "intersects" (Matthew)
v4: move !place check to the !res if and return false
    in ttm_resource_compatible() function (Christian)
v5: move bits of code from patch number 6 to avoid
    temporary driver breakup (Christian)

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220820073304.178444-1-Arunpravin.PaneerSelvam@amd.com

drm/msm: Make .remove and .shutdown HW shutdown consistent

Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.

This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.

For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.

That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.

A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.

This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:

  systemd-shutdown[1]: Powering off.
  kvm: exiting hardware virtualization
  platform wifi-firmware.0: Removing from iommu group 12
  platform video-firmware.0: Removing from iommu group 10
  ------------[ cut here ]------------
  WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
  ...
  Hardware name: Google CoachZ (rev3+) (DT)
  pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
  lr : drm_modeset_lock_all_ctx+0x48/0x3d0
  sp : ffff80000805bb80
  x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
  x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
  x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
  x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
  x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
  x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
  x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
  x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
  x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
  x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
  Call trace:
   drm_modeset_lock_all_ctx+0x3c4/0x3d0
   drm_atomic_helper_shutdown+0x70/0x134
   msm_drv_shutdown+0x30/0x40
   platform_shutdown+0x28/0x40
   device_shutdown+0x148/0x350
   kernel_power_off+0x38/0x80
   __do_sys_reboot+0x288/0x2c0
   __arm64_sys_reboot+0x28/0x34
   invoke_syscall+0x48/0x114
   el0_svc_common.constprop.0+0x44/0xec
   do_el0_svc+0x2c/0xc0
   el0_svc+0x2c/0x84
   el0t_64_sync_handler+0x11c/0x150
   el0t_64_sync+0x18c/0x190
  ---[ end trace 0000000000000000 ]---
  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
  Mem abort info:
    ESR = 0x0000000096000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
    FSC = 0x04: level 0 translation fault
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
  [0000000000000018] pgd=0000000000000000, p4d=0000000000000000
  Internal error: Oops: 96000004 [#1] PREEMPT SMP
  ...
  Hardware name: Google CoachZ (rev3+) (DT)
  pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : ww_mutex_lock+0x28/0x32c
  lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
  sp : ffff80000805bb50
  x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
  x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018
  x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800
  x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034
  x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
  x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
  x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
  x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
  x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
  x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018
  Call trace:
   ww_mutex_lock+0x28/0x32c
   drm_modeset_lock_all_ctx+0x1b0/0x3d0
   drm_atomic_helper_shutdown+0x70/0x134
   msm_drv_shutdown+0x30/0x40
   platform_shutdown+0x28/0x40
   device_shutdown+0x148/0x350
   kernel_power_off+0x38/0x80
   __do_sys_reboot+0x288/0x2c0
   __arm64_sys_reboot+0x28/0x34
   invoke_syscall+0x48/0x114
   el0_svc_common.constprop.0+0x44/0xec
   do_el0_svc+0x2c/0xc0
   el0_svc+0x2c/0x84
   el0t_64_sync_handler+0x11c/0x150
   el0t_64_sync+0x18c/0x190
  Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02)
  ---[ end trace 0000000000000000 ]---
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  Kernel Offset: 0x495d77c00000 from 0xffff800008000000
  PHYS_OFFSET: 0xffffcd8500000000
  CPU features: 0x800,00c2a015,19801c82
  Memory Limit: none
  ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816134612.916527-1-javierm@redhat.com

drm/virtio: remove drm_plane_cleanup() destroy hook

drmm_universal_plane_alloc() already registers drm_plane_cleanup() as
managed release action via drmm_add_action_or_reset(). Hence,
drm_plane_cleanup() should not be set as drm_plane_funcs.destroy hook.

Fixes: 7847628862a8 ("drm/virtio: plane: use drm managed resources")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803145520.1143208-1-dakr@redhat.com

drm/nouveau/kms/nv140-: Disable interlacing

As it turns out: while Nvidia does actually have interlacing knobs on their
GPU still pretty much no current GPUs since Volta actually support it.
Trying interlacing on these GPUs will result in NVDisplay being quite
unhappy like so:

nouveau 0000:1f:00.0: disp: chid 0 stat 00004802 reason 4 [INVALID_ARG] mthd 2008 data 00000001 code 00080000
nouveau 0000:1f:00.0: disp: chid 0 stat 10005080 reason 5 [INVALID_STATE] mthd 0200 data 00000001 code 00000001

So let's fix this by following the same behavior Nvidia's driver does and
disable interlacing entirely.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816180436.156310-1-lyude@redhat.com

drm/vc4: Drop of_gpio header

This driver includes the deprecated OF GPIO header <linux/of_gpio.h>
yet fail to use symbols from it, so drop the include.

Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220812205746.609107-6-mairacanal@riseup.net

drm/i915: Use luminance range calculated during edid parsing

Instead of using fixed 0 - 512 range use luminance range calculated
as a part of edid parsing. As a backup fall back to static 0 - 512.

v3: Clean-ups suggested by Jani Nikula
v2: Use values calculated during edid parsing

Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-4-jouni.hogander@intel.com

drm/amdgpu_dm: Rely on split out luminance calculation function

Luminance range calculation was split out into drm_edid.c and is now
part of edid parsing. Rely on values calculated during edid parsing and
use these for caps->aux_max_input_signal and caps->aux_min_input_signal.

v2: Use values calculated during edid parsing

Cc: Roman Li <roman.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-3-jouni.hogander@intel.com

drm: New function to get luminance range based on static hdr metadata

Split luminance min/max calculation using static hdr metadata from
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:update_connector_ext_caps
into drm/drm_edid.c and use it during edid parsing. Calculated range is
stored into connector->display_info->luminance_range.

Add new data structure (drm_luminance_range_inf) to store luminance range
calculated using data from EDID's static hdr metadata block. Add this new
struct as a part of drm_display_info struct.

v3: Squashed adding drm_luminance_range_info patch here
v2: Calculate range during edid parsing

Cc: Roman Li <roman.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220719095700.14923-2-jouni.hogander@intel.com

drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node()

The reference 'child' in the iteration of for_each_available_child_of_node()
is only escaped out into a local variable which is only used to check
its value. So we still need to the of_node_put() when breaking of the
for_each_available_child_of_node() which will automatically increase
and decrease the refcount.

Fixes: ca454bd42dc2 ("drm/pl111: Support the Versatile Express")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711131550.361350-1-windhl@126.com

drm/bridge: tc358767: disable main link PHYs on main link disable

Disable the main link PHYs and put them into reset when the main link
is disabled. When the PHYs stay enabled while the rest of the DP link
circuits are disabled there is some noise on the data lanes, which some
displays try to lock onto, waking them up from their low power state.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706132812.2171250-3-l.stach@pengutronix.de

drm/bridge: tc358767: increase CLRSIPO count

The current CLRSIPO count is marginal and does not work with high
DSI clock rates. Increase it a bit to allow the DSI link to work at
up to 1Gbps lane speed.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706132812.2171250-2-l.stach@pengutronix.de

drm/bridge: tc358767: don't fixup mode sync polarity

There is no need to enforce a specific sync signal polarity on the
DPI interface, as we can simply tell the TC358767 which polarities
it should expect on the input interface.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706132812.2171250-1-l.stach@pengutronix.de

dma-buf/sync_file: use strscpy to replace strlcpy

The strlcpy should not be used because it doesn't limit the source
length. Preferred is strscpy.

Signed-off-by: XueBing Chen <chenxuebing@jari.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/6aad3bff.d1a.181b982d1b1.Coremail.chenxuebing@jari.cn

drm/udl: Replace BUG_ON() with WARN_ON()

BUG_ON() is a tasteless choice as a sanity check for a driver like UDL
that isn't really a core code.  Replace with WARN_ON() and proper
error handling instead.

Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-5-tiwai@suse.de

drm/udl: Kill pending URBs at suspend and disconnect

At both suspend and disconnect, we should rather cancel the pending
URBs immediately.  For the suspend case, the display will be turned
off, so it makes no sense to process the rendering.  And for the
disconnect case, the device may be no longer accessible, hence we
shouldn't do any submission.

Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-4-tiwai@suse.de

drm/udl: Sync pending URBs at suspend / disconnect

We need to wait for finishing to process the all URBs after disabling
the pipe; otherwise pending URBs may stray at suspend/resume, leading
to a possible memory corruption in a worst case.

Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-3-tiwai@suse.de

drm/udl: Replace semaphore with a simple wait queue

UDL driver uses a semaphore for controlling the emptiness of FIFO in a
slightly funky way.  This patch replaces it with a wait queue and
controls the emptiness with the standard wait_event*() macro instead,
which is a more straightforward implementation.

While we are at it, drop the dead code for delayed semaphore down,
too.

Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-2-tiwai@suse.de

drm/format-helper: Rename parameter vmap to src

Rename the parameter vmap to src in all functions. The parameter
contains the locations of the source data and the new name says that.

v3:
* fix typo in commit message

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-15-tzimmermann@suse.de

drm/format-helper: Move destination-buffer handling into internal helper

The format-convertion helpers handle several cases for different
values of destination buffer and pitch. Move that code into the
internal helper drm_fb_xfrm() and avoid quite a bit of duplication.

v2:
* remove a duplicated blank line (Jose)
* use drm_format_info_bpp() (Sam)
  * fix vaddr_cached_hint bug (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-14-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-MONO conversion

Update XRGB8888-to-MONO conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* rebase after renaming CMA helpers to DMA helpers
* update documentation (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-13-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-GRAY8 conversion

Update XRGB8888-to-GRAY8 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-12-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-XRGB2101010 conversion

Update XRGB8888-to-XRGB2101010 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-11-tzimmermann@suse.de

drm/format-helper: Rework RGB888-to-XRGB8888 conversion

Update RGB888-to-XRGB8888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-10-tzimmermann@suse.de

drm/format-helper: Rework RGB565-to-XRGB8888 conversion

Update RGB565-to-XRGB8888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-9-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-RGB888 conversion

Update XRGB8888-to-RGB888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-8-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-RGBG565 conversion

Update XRGB8888-to-RGB565 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* update new Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-7-tzimmermann@suse.de

drm/format-helper: Rework XRGB8888-to-RGBG332 conversion

Update XRGB8888-to-RGB332 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().

v2:
* rebase onto refactored Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-6-tzimmermann@suse.de

drm/format-helper: Convert drm_fb_swab() to struct iosys_map

Convert drm_fb_swab() to use struct iosys_map() and convert users. The
new interface supports multi-plane color formats, but implementation
only supports a single plane for now.

v2:
* use drm_format_info_bpp() (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-5-tzimmermann@suse.de

drm/format-helper: Merge drm_fb_memcpy() and drm_fb_memcpy_toio()

Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy()
that uses struct iosys_map for buffers. The new function also supports
multi-plane color formats. Convert all users of the original helpers.

v2:
* rebase onto refactored mgag200
* use drm_formap_info_bpp() (Sam)
* do static init in hyperv and mgag200 (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-4-tzimmermann@suse.de

drm/format-helper: Provide drm_fb_blit()

Provide drm_fb_blit() that works with struct iosys_map. Update all
users of drm_fb_blit_toio(), which required a destination buffer in
I/O memory.

This patch only updates the function's interface. The implementation
still relies on the destination buffer to be located in  I/O memory.
See the follow-up patches for implementational changes. The new
function's interface works with multi-plane color formats, but again
implementation only supports a single plane for now.

v2:
* rebase onto refactored simpledrm
* use IOSYS_MAP_INIT_VADDR() (Sam)
* update the commit message on the use of I/O memory (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-3-tzimmermann@suse.de

iosys-map: Add IOSYS_MAP_INIT_VADDR_IOMEM()

Add IOSYS_MAP_INIT_VADDR_IOMEM() for static init of variables of type
struct iosys_map.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-2-tzimmermann@suse.de

drm/panfrost: Add support for devcoredump

In the event of a job timeout, debug dump information will be written into
/sys/class/devcoredump.

Inspired by etnaviv's similar feature.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729144610.2105223-3-adrian.larumbe@collabora.com

drm/panfrost: Add specific register offset macros for JS and MMU AS

Each Panfrost job has its own job slot and MMU address space set of
registers, which are selected with a job-specific index.

Turn the shift and stride used for selection of the right register set base
into a define rather than using magic numbers.

Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729144610.2105223-2-adrian.larumbe@collabora.com

gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()

A NULL check for bridge->encoder shows that it may be NULL, but it
already been dereferenced on all paths leading to the check.
812 if (!bridge->encoder) {

Dereference the pointer bridge->encoder.
810 drm_connector_attach_encoder(&lt9611->connector, bridge->encoder);

Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220727073119.1578972-1-zengjx95@gmail.com

drm/simpledrm: Convert to atomic helpers

Replace the simple-KMS helpers with the regular atomic helpers. The
regular helpers are better architectured and therefore allow for easier
code sharing among drivers. No functional changes.

v3:
* remove empty CRTC helpers atomic_{enable, disable} (Javier)
* unconditionally run drm_atomic_helper_check_plane_state()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-6-tzimmermann@suse.de

drm/simpledrm: Compute framebuffer stride if not set

Compute the framebuffer's scanline stride length if not given by
the simplefb data.

v3:
* get pixel size from drm_format_info_bpp() (Geert, Javier)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-5-tzimmermann@suse.de

drm/simpledrm: Remove pdev field from device structure

Replace the remaining uses of the field pdev by upcasts from the Linux
device and remove the field.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-4-tzimmermann@suse.de

drm/simpledrm: Inline device-init helpers

Inline the helpers for initializing the hardware FB, the memory
management and the modesetting into the device-creation function.
No functional changes.

In the original code, init helpers depended on values from other
init helpers. Inlining the functions ensures that steps are taken
in the correct order. It's also easier to see what happens. The
device is simple enough to be set up in one function. Only clocks
and regulators are still set up in their own helpers, as their
presence is system dependent.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-3-tzimmermann@suse.de

drm/simpledrm: Remove mem field from device structure

Remove the unused mem field from struct simpledrm_device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-2-tzimmermann@suse.de

drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()

When booting a kernel compiled with clang's CFI protection
(CONFIG_CFI_CLANG), there is a CFI failure in
drm_simple_kms_crtc_mode_valid() when trying to call
simpledrm_simple_display_pipe_mode_valid() through ->mode_valid():

[    0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8):
...
[    0.324928] Call trace:
[    0.324969]  __ubsan_handle_cfi_check_fail+0x58/0x60
[    0.325053]  __cfi_check_fail+0x3c/0x44
[    0.325120]  __cfi_slowpath_diag+0x178/0x200
[    0.325192]  drm_simple_kms_crtc_mode_valid+0x58/0x80
[    0.325279]  __drm_helper_update_and_validate+0x31c/0x464
...

The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs'
expects a return type of 'enum drm_mode_status', not 'int'. Correct it
to fix the CFI failure.

Cc: stable@vger.kernel.org
Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1647
Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org
(cherry picked from commit 0c09bc33aa8e9dc867300acaadc318c2f0d85a1e)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm: Remove the drm_get_unmapped_area() helper

This has been only used by the vmwgfx driver and vmwgfx over the last
year removed support for transparent hugepages on vram leaving
drm_get_unmapped_area completely unused.

There's no point in keeping unused code in core drm.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220425203152.1314211-2-zack@kde.org

drm/vmwgfx: Remove unused hugepage support

There's no point in explicitly trying to align virtual memory to
facilitate huge page table entries or huge page memory in buffer objects
given that they're not being used.

Transparent hugepages support for vram allocations has been gradually
retired over the last two years making alignment of unmapped areas
unneeded and pointless.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425203152.1314211-1-zack@kde.org

drm/vmwgfx: cleanup comments

Remove second 'should'

Spelling replacements
aqcuire     -> acquire
applcations -> applications
assumings   -> assumes
begining    -> beginning
commited    -> committed
contol      -> control
inbetween   -> in between
resorces    -> resources
succesful   -> successful
successfule -> successful

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220730135704.2889434-1-trix@redhat.com

drm/vmwgfx: clean up some error pointer checking

The vmw_user_bo_noref_lookup() function cannot return NULL.  If it
could, then this function would return PTR_ERR(NULL) which is success.
Returning success without initializing "*vmw_bo_p = vmw_bo;" would
lead to an uninitialized variable bug in the caller.  Smatch complains
about this:

drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:1177 vmw_translate_mob_ptr() warn: passing zero to 'PTR_ERR'
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c:1314 vmw_cmd_dx_bind_query() error: uninitialized symbol 'vmw_bo'.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YtZ9qrKeBqmmK8Hv@kili

drm: fix whitespace in drm_plane_create_color_properties()

The drm_property_create_enum() call for "COLOR_RANGE" contains a tab
character in the middle of the argument list.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803204240.33409-1-contact@emersion.fr

drm/todo: remove task to rename CMA helpers

Both, GEM and FB, CMA helpers were renamed to "GEM DMA" and "FB DMA",
hence the task can be removed.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-6-dakr@redhat.com

drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}

The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.

Hence, rename the field to dma_addr, which is more applicable.

In order to do this renaming the following coccinelle script was used:

```
@@
struct drm_gem_dma_object *gem;
@@

- gem->paddr
+ gem->dma_addr

@@
struct drm_gem_dma_object gem;
@@

- gem.paddr
+ gem.dma_addr

@exists@
typedef dma_addr_t;
symbol paddr;
@@

dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>

@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;

```

This patch is compile-time tested with:

```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com

drm/gem: rename GEM CMA helpers to GEM DMA helpers

Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
       sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
       sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done

# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".

Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com

drm/fb: rename FB CMA helpers to FB DMA helpers

Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.

Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.

In order to do this renaming the following script was used:

```
#!/bin/bash

DIRS="drivers/gpu include/drm Documentation/gpu"

REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"

REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"

REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"

# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
       sed -i -E "$REGEX_SED_UPPER" $ff
done

# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
       sed -i -E "$REGEX_SED_LOWER" $ff
done

# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```

Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files

    -       select CMA if HAVE_DMA_CONTIGUOUS
    +       select DMA if HAVE_DMA_CONTIGUOUS

as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".

This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com

drm/fb: remove unused includes of drm_fb_cma_helper.h

Quite a lot of drivers include the drm_fb_cma_helper.h header file
without actually making use of it's provided API, hence remove those
includes.

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-2-dakr@redhat.com

Merge drm/drm-next into drm-misc-next

Backmerging to pick up fixes from amdgpu.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm/mgag200: Remove type field from struct mga_device

Each model's specific code is located in a separate file. The type
field in struct mga_device is no unused. Remove it.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-15-tzimmermann@suse.de

drm/mgag200: Move CRTC atomic_enable to model-specific code

The CRTC atomic_enable helper contains per-model branches for
G200ER, G200EV and G200SE devices. Implement a dedicated helper
for each of them and remove the branches from the shared helper.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-14-tzimmermann@suse.de

drm/mgag200: Move mode-config to model-specific code

Move the mode-config code into model-specific code and call the
plane/CRTC helpers as needed. This will help with providing per-
model implementations of individual helpers.

Duplication of the pipeline init function is accepted. Some macros
simplify this for shared helpers.

v3:
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-13-tzimmermann@suse.de

drm/mgag200: Provide per-device callbacks for PIXPLLC

Move the PIXPLLC code into per-model source files and wire it up
with per-model callbacks. No functional changes.

The PIXPLLC pixel-clock is part of the CRTC, but really separate
hardware that varies with each model of the G200. Move the PIXPLLC
code for each model into the per-model source file and call it from
CRTC helpers via device functions.

This allows to remove struct mgag200_pll and the related code. The
new callbacks behave like the CRTC's atomic_check and atomic_enable
functions.

v3:
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-12-tzimmermann@suse.de

drm/mgag200: Provide per-device callbacks for BMC synchronization

Move the BMC-related code into its own file and wire it up with device
callbacks.

While programming a new display mode, G200EW3 and G200WB have to de-
synchronize with the BMC. Synchronization is done via VIDRST pins
and controlled via VRSTEN and HRSTEN bits. Move the BMC code behind
a serviceable interface and call it from the CRTC's enable and
disable functions.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-11-tzimmermann@suse.de

drm/mgag200: Add per-device callbacks

While currently empty, the device callbacks will allow mgag200's
modesetting code to interact with the BMC and PIXPLLC.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-10-tzimmermann@suse.de

drm/mgag200: Set SCROFF in primary-plane code

The SCROFF bit controls reading the primary plane's scanout buffer
from video memory. Set it from primary-plane code, instead of CRTC
code.

v3:
* only flip SCROFF when enabling/disabling the plane (Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-9-tzimmermann@suse.de

drm/mgag200: Replace simple-KMS with regular atomic helpers

Drop simple-KMS in favor of regular atomic helpers. Makes the code
more modular and hence better to adapt to per-model requirements.

The simple-KMS helpers provide few extra features, so the patch is
mostly about open-coding what simple-KMS does. The simple-KMS helpers
do mix up plane and CRTC state. Changing to regular atomic helpers
requires to split some of the simple-pipe functions into per-plane
and per-CRTC code

No functional changes.

v3:
* always run drm_atomic_helper_check_plane_state()
* clean up style

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-8-tzimmermann@suse.de

drm/mgag200: Reorganize before dropping simple-KMS helpers

Move around some modesetting code before dropping simple-KMS helpers.
Makes the next patch more readable. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-7-tzimmermann@suse.de

drm/mgag200: Store primary plane's color format in CRTC state

Store the primary plane's color format in the CRTC state and use
it for programming the CRTC's gamma LUTs.

Gamma tables (i.e., color management) are provided by the CRTC, but
depend in the primary plane's color format. Store the format in the
CRTC state and use it. This has not been an issue with simple-KMS
helpers, which mix-up plane and CRTC state to some extent. For using
regular atomic helpers, it's necessary to distinguish between the two.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-6-tzimmermann@suse.de

drm/mgag200: Acquire I/O-register lock in atomic_commit_tail function

Hold I/O-register lock in atomic_commit_tail to protect all pipeline
updates at once. Protects against concurrent I/O access in get-modes
helper.

Complex modesetting operations involve mode changes, plane updates and
possibly BMC updates. Make all this atomic wrt to reading display modes
via EDID. It's not so much an issue with simple-KMS helpers, but will
become necessary for using regular atomic helpers.

v4:
* remove empty line

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-5-tzimmermann@suse.de

drm/mgag200: Move ER/EW3 register initialization to per-model code

The register initialization code contains special cases for G200ER
and G200EW3 hardware. Move this to per-model code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-4-tzimmermann@suse.de

drm/mgag200: Move DAC-register setup into model-specific code

Provide an init function for each model's DAC registers. Remove
the shared helper.

The code for initializing the DAC registers consisted of a large
table of default value, plus many exceptions for the various G200
models. Providing a per-model implementation makes if more readable.
At some point, some of the initialization should probably move into
the modesetting code.

v2:
* don't duplicate DAC values unnecessarily (Sam, Jocelyn)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-3-tzimmermann@suse.de

drm/mgag200: Split mgag200_modeset_init()

Split mgag200_modeset_init() into smaller helpers to initialize
the mode_config structure and the pipeline. This will be helpful
for transforming this code into per-model functions. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220728124103.30159-2-tzimmermann@suse.de

drm/tests: Split up test cases in igt_check_drm_format_min_pitch

The igt_check_drm_format_min_pitch() function had a lot of
KUNIT_EXPECT_* calls, all of which ended up allocating and initializing
various test assertion structures on the stack.

This behavior was producing -Wframe-larger-than warnings on PowerPC, i386,
and MIPS architectures, such as:

drivers/gpu/drm/tests/drm_format_test.c: In function 'igt_check_drm_format_min_pitch':
drivers/gpu/drm/tests/drm_format_test.c:271:1: error: the frame size of
3712 bytes is larger than 2048 bytes

So, the igt_check_drm_format_min_pitch() test case was split into three
smaller functions: one testing single plane formats, one testing
multi-planar formats, and the other testing tiled formats.

Fixes: 0421bb0baa84 ("drm: selftest: convert drm_format selftest to KUnit")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729124726.748221-1-mairacanal@riseup.net

drm/dp_mst: fix drm_dp_dpcd_read return value checks

drm_dp_dpcd_read returns the number of bytes read. The previous code
would print garbage on DPCD error, and would exit with on error on
success.

Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/473500/

drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb565()

Extend the existing test cases to test the conversion from XRGB8888 to
RGB565.

The documentation and the color picker available on [1] are useful
resources to understand this patch and validate the values returned by
the conversion function.

Tested-by: Tales L. Aparecida <tales.aparecida@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: http://www.barth-dev.de/online/rgb565-color-picker/
Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-5-jose.exposito89@gmail.com

drm/format-helper: Support multiple target formats results

In order to support multiple destination format conversions, store the
destination pitch and the expected result in its own structure.

Tested-by: Tales L. Aparecida <tales.aparecida@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-4-jose.exposito89@gmail.com

drm/format-helper: Rename test cases to make them more generic

The tests available at the moment only check the conversion from
XRGB8888 to RGB332. However, more conversions will be tested in the
future.

In order to make the struct and functions present in the tests more
generic, rename xrgb8888_to_rgb332_* to convert_xrgb8888_*.

Tested-by: Tales L. Aparecida <tales.aparecida@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-3-jose.exposito89@gmail.com

drm/format-helper: Fix test on big endian architectures

The tests fail on big endian architectures, like PowerPC:

 $ ./tools/testing/kunit/kunit.py run \
   --kunitconfig=drivers/gpu/drm/tests \
   --arch=powerpc --cross_compile=powerpc64-linux-gnu-

Transform the XRGB8888 buffer from little endian to the CPU endian
before calling the conversion function to avoid this error.

Fixes: 8f456104915f ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb332()")
Reported-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726230916.390575-2-jose.exposito89@gmail.com

drm/todo: remove task for idr_init_base()

All IDRs in the DRM core and drivers which are applicable for using
idr_init_base() over idr_init() should be set up to use a proper base in
order to avoid unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701190227.284783-3-dakr@redhat.com

drm/via: use idr_init_base() to initialize dev_priv->object_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701190227.284783-2-dakr@redhat.com

drm/v3d: use idr_init_base() to initialize v3d_priv->perfmon.idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701190227.284783-1-dakr@redhat.com

drm/sis: use idr_init_base() to initialize dev_priv->object_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-8-dakr@redhat.com

drm: use idr_init_base() to initialize mode_config.tile_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-7-dakr@redhat.com

drm: use idr_init_base() to initialize mode_config.object_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-6-dakr@redhat.com

drm: use idr_init_base() to initialize master->lessee_idr

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-5-dakr@redhat.com

drm: use idr_init_base() to initialize master->magic_map

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-4-dakr@redhat.com

drm/amdgpu: use idr_init_base() to initialize fpriv->bo_list_handles

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested/allocated, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-3-dakr@redhat.com

drm/amdgpu: use idr_init_base() to initialize mgr->ctx_handles

idr_init_base(), implemented by commit 6ce711f27500 ("idr: Make 1-based
IDRs more efficient"), let us set an arbitrary base other than
idr_init(), which uses base 0.

Since, for this IDR, no ID < 1 is ever requested, using
idr_init_base(&idr, 1) avoids unnecessary tree walks.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220701185303.284082-2-dakr@redhat.com

fbdev: Make registered_fb[] private to fbmem.c

No driver access this anymore, except for the olpc dcon fbdev driver but
that has been marked as broken anyways by commit de0952f267ff ("staging:
olpc_dcon: mark driver as broken").

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725075400.68478-1-javierm@redhat.com

drm/panel/panel-sitronix-st7701: Add Densitron DMT028VGHMCMI-1A TFT

Add support for Densitron DMT028VGHMCMI-1A TFT matrix into this driver.
This is a DSI-attached 480x640 2.83 inch panel.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725151703.319939-2-marex@denx.de

dt-bindings: display: panel: sitronix,st7701: Add Densitron DMT028VGHMCMI-1A TFT

Add compatible string for Densitron DMT028VGHMCMI-1A TFT matrix.
This is a DSI-attached 480x640 2.83 inch panel.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725151703.319939-1-marex@denx.de

drm: Fix typo 'the the' in comment

Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721062345.46842-1-slark_xiao@163.com

Merge tag 'topic/nouveau-misc-2022-07-27' of git://anongit.freedesktop.org/drm/drm into drm-next

drm/nouveau-misc: display patches.

These are just some precursor and cleanup display patches from Ben,
tested by Lyude.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAPM=9ty0R37q0mohBr_CegpYLXK2=fAH54QfAsMhHfPygTsdQA@mail.gmail.com

Merge tag 'amd-drm-next-5.20-2022-07-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amdgpu:
- VCN4 fixes
- RAS support for UMC 8.10
- ACP support for jadeite platforms
- NBIO HDP flush fixes
- Misc spelling and grammar fixes
- Runtime PM fixes
- Non-DC HPD fix
- Clean up amdgpu DM code
- DSC fixes
- Expose some additional GFXOFF data via debugfs
- More FP clean up for new DCN blocks
- PPC DC FP fixes
- DCN 3.1.4 fixes
- DC DML stack usage fixes
- GMC fixes
- SPM fixes for RDNA2

amdkfd:
- MMU notifier fix
- Mutex fix

UAPI:
- Add a comment about VCN4 unified queues
- IP version information for UMDs
  Proposed mesa change: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17411/diffs?commit_id=c8a63590dfd0d64e6e6a634dcfed993f135dd075

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726181536.5759-1-alexander.deucher@amd.com

drm/nouveau/disp: move DAC load detection method

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>