review.tizen.org Git - platform/kernel/linux-rpi.git/log

x86/decoder: Add TEST opcode to Group3-2

[ Upstream commit 8b7e20a7ba54836076ff35a28349dabea4cec48f ]

Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.

Commit

  12a78d43de76 ("x86/decoder: Add new TEST instruction pattern")

added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did
not add f7 XX/001/XXX (Group 3-2).

Actually, this TEST opcode variant (ModRM.reg /1) is not described in
the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3,
Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.

Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.

    HOSTCC  arch/x86/tools/insn_decoder_test
    HOSTCC  arch/x86/tools/insn_sanity
    TEST    posttest
  arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
  arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00     testl  $0x80100,(%rbx)
  arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2
  arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures
    TEST    posttest
  arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)

To fix this error, add the TEST opcode according to AMD64 APM Vol.3.

[ bp: Massage commit message. ]

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>

objtool: Fix ARCH=x86_64 build error

[ Upstream commit 8580bed7e751e6d4f17881e059daf3cb37ba4717 ]

Building objtool with ARCH=x86_64 fails with:

   $make ARCH=x86_64 -C tools/objtool
   ...
     CC       arch/x86/decode.o
   arch/x86/decode.c:10:22: fatal error: asm/insn.h: No such file or directory
    #include <asm/insn.h>
                         ^
   compilation terminated.
   mv: cannot stat ‘arch/x86/.decode.o.tmp’: No such file or directory
   make[2]: *** [arch/x86/decode.o] Error 1
   ...

The root cause is that the command-line variable 'ARCH' cannot be
overridden.  It can be replaced by 'SRCARCH', which is defined in
'tools/scripts/Makefile.arch'.

Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/d5d11370ae116df6c653493acd300ec3d7f5e925.1579543924.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: use -S instead of -E for precise cc-option test in Kconfig

[ Upstream commit 3bed1b7b9d79ca40e41e3af130931a3225e951a3 ]

Currently, -E (stop after the preprocessing stage) is used to check
whether the given compiler flag is supported.

While it is faster than -S (or -c), it can be false-positive. You need
to run the compilation proper to check the flag more precisely.

For example, -E and -S disagree about the support of
"--param asan-instrument-allocas=1".

$ gcc -Werror --param asan-instrument-allocas=1 -E -x c /dev/null -o /dev/null
$ echo $?
0

$ gcc -Werror --param asan-instrument-allocas=1 -S -x c /dev/null -o /dev/null
cc1: error: invalid --param name ‘asan-instrument-allocas’; did you mean ‘asan-instrument-writes’?
$ echo $?
1

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations

[ Upstream commit b0177aca7aea7e8917d4e463334b51facb293d02 ]

Make use of a core helper to ensure the desired width is respected
when calling spi-mem operators.

Otherwise only the SPI controller will be matched with the flash chip,
which might lead to wrong widths. Also consider the width specified by
the user in the device tree.

Fixes: 84d043185dbe ("spi: Add a driver for the Freescale/NXP QuadSPI controller")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200114154613.8195-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/hdmi - add retry logic to parse_intel_hdmi()

[ Upstream commit 2928fa0a97ebb9549cb877fdc99aed9b95438c3a ]

The initial snd_hda_get_sub_node() can fail on certain
devices (e.g. some Chromebook models using Intel GLK).
The failure rate is very low, but as this is is part of
the probe process, end-user impact is high.

In observed cases, related hardware status registers have
expected values, but the node query still fails. Retrying
the node query does seem to help, so fix the problem by
adding retry logic to the query. This does not impact
non-Intel platforms.

BugLink: https://github.com/thesofproject/linux/issues/1642
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200120160117.29130-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problems

[ Upstream commit d6152e6ec9e2171280436f7b31a571509b9287e1 ]

The following crash can be seen for setting
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use):

Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain
Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12

[...]

Unable to handle kernel paging request at virtual address 0000000000005008
Mem abort info:
   ESR = 0x96000004
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
Data abort info:
   ISV = 0, ISS = 0x00000004
   CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000
[0000000000005008] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622
Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
pstate: 40000085 (nZcv daIf -PAN -UAO)
pc : mbigen_set_type+0x38/0x60
lr : __irq_set_trigger+0x6c/0x188
sp : ffff800014b4b400
x29: ffff800014b4b400 x28: 0000000000000007
x27: 0000000000000000 x26: 0000000000000000
x25: ffff041fd83bd0d4 x24: ffff041fd83bd188
x23: 0000000000000000 x22: ffff80001193ce00
x21: 0000000000000004 x20: 0000000000000000
x19: ffff041fd83bd000 x18: ffffffffffffffff
x17: 0000000000000000 x16: 0000000000000000
x15: ffff8000119098c8 x14: ffff041fb94ec91c
x13: ffff041fb94ec1a1 x12: 0000000000000030
x11: 0101010101010101 x10: 0000000000000040
x9 : 0000000000000000 x8 : ffff041fb98c6680
x7 : ffff800014b4b380 x6 : ffff041fd81636c8
x5 : 0000000000000000 x4 : 000000000000025f
x3 : 0000000000005000 x2 : 0000000000005008
x1 : 0000000000000004 x0 : 0000000080000000
Call trace:
  mbigen_set_type+0x38/0x60
  __setup_irq+0x744/0x900
  request_threaded_irq+0xe0/0x198
  pcie_pme_probe+0x98/0x118
  pcie_port_probe_service+0x38/0x78
  really_probe+0xa0/0x3e0
  driver_probe_device+0x58/0x100
  __device_attach_driver+0x90/0xb0
  bus_for_each_drv+0x64/0xc8
  __device_attach+0xd8/0x138
  device_initial_probe+0x10/0x18
  bus_probe_device+0x90/0x98
  device_add+0x4c4/0x770
  device_register+0x1c/0x28
  pcie_port_device_register+0x1e4/0x4f0
  pcie_portdrv_probe+0x34/0xd8
  local_pci_probe+0x3c/0xa0
  pci_device_probe+0x128/0x1c0
  really_probe+0xa0/0x3e0
  driver_probe_device+0x58/0x100
  __device_attach_driver+0x90/0xb0
  bus_for_each_drv+0x64/0xc8
  __device_attach+0xd8/0x138
  device_attach+0x10/0x18
  pci_bus_add_device+0x4c/0xb8
  pci_bus_add_devices+0x38/0x88
  pci_host_probe+0x3c/0xc0
  pci_host_common_probe+0xf0/0x208
  hisi_pcie_almost_ecam_probe+0x24/0x30
  platform_drv_probe+0x50/0xa0
  really_probe+0xa0/0x3e0
  driver_probe_device+0x58/0x100
  device_driver_attach+0x6c/0x90
  __driver_attach+0x84/0xc8
  bus_for_each_dev+0x74/0xc8
  driver_attach+0x20/0x28
  bus_add_driver+0x148/0x1f0
  driver_register+0x60/0x110
  __platform_driver_register+0x40/0x48
  hisi_pcie_almost_ecam_driver_init+0x1c/0x24

The specific problem here is that the mbigen driver real probe has failed
as the mbigen_of_create_domain()->of_platform_device_create() call fails,
the reason for that being that we never destroyed the platform device
created during the remove test dry run and there is some conflict.

Since we generally would never want to unbind this driver, and to save
adding a driver tear down path for that, just set the driver
.suppress_bind_attrs member to avoid this possibility.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: core: Fix exported symbols to the exported GPL version

[ Upstream commit 3d7610e8da993539346dce6f7c909fd3d56bf4d5 ]

Change the exported symbols introduced by commit e9153311491da
("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
from EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL(), like is used for all the core
parts.

Fixes: e9153311491da ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200120123921.1204339-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: Initialize rproc_class before use

[ Upstream commit a8f40111d184098cd2b3dc0c7170c42250a5fa09 ]

The remoteproc_core and remoteproc drivers all initialize with module_init().
However remoteproc drivers need the rproc_class during their probe. If one of
the remoteproc drivers runs init and gets through probe before
remoteproc_init() runs, a NULL pointer access of rproc_class's `glue_dirs`
spinlock occurs.

> Unable to handle kernel NULL pointer dereference at virtual address 000000dc
> pgd = c0004000
> [000000dc] *pgd=00000000
> Internal error: Oops: 5 [#1] PREEMPT ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper Tainted: G        W       4.14.106-rt56 #1
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> task: c6050000 task.stack: c604a000
> PC is at rt_spin_lock+0x40/0x6c
> LR is at rt_spin_lock+0x28/0x6c
> pc : [<c0523c90>]    lr : [<c0523c78>]    psr: 60000013
> sp : c604bdc0  ip : 00000000  fp : 00000000
> r10: 00000000  r9 : c61c7c10  r8 : c6269c20
> r7 : c0905888  r6 : c6269c20  r5 : 00000000  r4 : 000000d4
> r3 : 000000dc  r2 : c6050000  r1 : 00000002  r0 : 000000d4
> Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
...
> [<c0523c90>] (rt_spin_lock) from [<c03b65a4>] (get_device_parent+0x54/0x17c)
> [<c03b65a4>] (get_device_parent) from [<c03b6bec>] (device_add+0xe0/0x5b4)
> [<c03b6bec>] (device_add) from [<c042adf4>] (rproc_add+0x18/0xd8)
> [<c042adf4>] (rproc_add) from [<c01110e4>] (my_rproc_probe+0x158/0x204)
> [<c01110e4>] (my_rproc_probe) from [<c03bb6b8>] (platform_drv_probe+0x34/0x70)
> [<c03bb6b8>] (platform_drv_probe) from [<c03b9dd4>] (driver_probe_device+0x2c8/0x420)
> [<c03b9dd4>] (driver_probe_device) from [<c03ba02c>] (__driver_attach+0x100/0x11c)
> [<c03ba02c>] (__driver_attach) from [<c03b7d08>] (bus_for_each_dev+0x7c/0xc0)
> [<c03b7d08>] (bus_for_each_dev) from [<c03b910c>] (bus_add_driver+0x1cc/0x264)
> [<c03b910c>] (bus_add_driver) from [<c03ba714>] (driver_register+0x78/0xf8)
> [<c03ba714>] (driver_register) from [<c010181c>] (do_one_initcall+0x100/0x190)
> [<c010181c>] (do_one_initcall) from [<c0800de8>] (kernel_init_freeable+0x130/0x1d0)
> [<c0800de8>] (kernel_init_freeable) from [<c051eee8>] (kernel_init+0x8/0x114)
> [<c051eee8>] (kernel_init) from [<c01175b0>] (ret_from_fork+0x14/0x24)
> Code: e2843008 e3c2203f f5d3f000 e5922010 (e193cf9f)
> ---[ end trace 0000000000000002 ]---

Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Link: https://lore.kernel.org/r/20190530225223.136420-1-brandon.maier@rockwellcollins.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

module: avoid setting info->name early in case we can fall back to info->mod->name

[ Upstream commit 708e0ada1916be765b7faa58854062f2bc620bbf ]

In setup_load_info(), info->name (which contains the name of the module,
mostly used for early logging purposes before the module gets set up)
gets unconditionally assigned if .modinfo is missing despite the fact
that there is an if (!info->name) check near the end of the function.
Avoid assigning a placeholder string to info->name if .modinfo doesn't
exist, so that we can fall back to info->mod->name later on.

Fixes: 5fdc7db6448a ("module: setup load info before module_sig_check()")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: device stats, log when stats are zeroed

[ Upstream commit a69976bc69308aa475d0ba3b8b3efd1d013c0460 ]

We had a report indicating that some read errors aren't reported by the
device stats in the userland. It is important to have the errors
reported in the device stat as user land scripts might depend on it to
take the reasonable corrective actions. But to debug these issue we need
to be really sure that request to reset the device stat did not come
from the userland itself. So log an info message when device error reset
happens.

For example:
BTRFS info (device sdc): device stats zeroed by btrfs(9223)

Reported-by: philip@philip-seeger.de
Link: https://www.spinics.net/lists/linux-btrfs/msg96528.html
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: safely advance counter when looking up bio csums

[ Upstream commit 4babad10198fa73fe73239d02c2e99e3333f5f5c ]

Dan's smatch tool reports

fs/btrfs/file-item.c:295 btrfs_lookup_bio_sums()
warn: should this be 'count == -1'

which points to the while (count--) loop. With count == 0 the check
itself could decrement it to -1. There's a WARN_ON a few lines below
that has never been seen in practice though.

It turns out that the value of page_bytes_left matches the count (by
sectorsize multiples). The loop never reaches the state where count
would go to -1, because page_bytes_left == 0 is found first and this
breaks out.

For clarity, use only plain check on count (and only for positive
value), decrement safely inside the loop. Any other discrepancy after
the whole bio list processing should be reported by the exising
WARN_ON_ONCE as well.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix possible NULL-pointer dereference in integrity checks

[ Upstream commit 3dbd351df42109902fbcebf27104149226a4fcd9 ]

A user reports a possible NULL-pointer dereference in
btrfsic_process_superblock(). We are assigning state->fs_info to a local
fs_info variable and afterwards checking for the presence of state.

While we would BUG_ON() a NULL state anyways, we can also just remove
the local fs_info copy, as fs_info is only used once as the first
argument for btrfs_num_copies(). There we can just pass in
state->fs_info as well.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205003
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: Remove set but not set variable 'pwm'

[ Upstream commit 9871abffc81048e20f02e15d6aa4558a44ad53ea ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/pwm/pwm-pca9685.c: In function ‘pca9685_pwm_gpio_free’:
drivers/pwm/pwm-pca9685.c:162:21: warning: variable ‘pwm’ set but not used [-Wunused-but-set-variable]

It is never used, and so can be removed. In that case, hold and release
the lock 'pca->lock' can be removed since nothing will be done between
them.

Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ide: serverworks: potential overflow in svwks_set_pio_mode()

[ Upstream commit ce1f31b4c0b9551dd51874dd5364654ed4ca13ae ]

The "drive->dn" variable is a u8 controlled by root.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cmd64x: potential buffer overflow in cmd64x_program_timings()

[ Upstream commit 117fcc3053606d8db5cef8821dca15022ae578bb ]

The "drive->dn" value is a u8 and it is controlled by root only, but
it could be out of bounds here so let's check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional

[ Upstream commit 43efdc8f0e6d7088ec61bd55a73bf853f002d043 ]

In the old code (e.g.) mutex_destroy() was called before
pwmchip_remove(). Between these two calls it is possible that a PWM
callback is used which tries to grab the mutex.

Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd

[ Upstream commit 75fbef0a8b6b4bb19b9a91b5214f846c2dc5139e ]

The following commit:

15f003d20782 ("x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd()")

modified kernel_map_pages_in_pgd() to manage writable permissions
of memory mappings in the EFI page table in a different way, but
in the process, it removed the ability to clear NX attributes from
read-only mappings, by clobbering the clear mask if _PAGE_RW is not
being requested.

Failure to remove the NX attribute from read-only mappings is
unlikely to be a security issue, but it does prevent us from
tightening the permissions in the EFI page tables going forward,
so let's fix it now.

Fixes: 15f003d20782 ("x86/mm/pat: Don't implicitly allow _PAGE_RW in kernel_map_pages_in_pgd()
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200113172245.27925-5-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix memleak of kobject

[ Upstream commit fe396ad8e7526f059f7b8c7290d33a1b84adacab ]

If kobject_init_and_add() failed, caller needs to invoke kobject_put()
to release kobject explicitly.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage

[ Upstream commit e9153311491da9d9863ead9888a1613531cb4a1b ]

`cat /sys/kernel/debug/regulator/regulator_summary` ends on a deadlock
when you have a voltage controlled regulator (vctrl).

The problem is that the vctrl_get_voltage() and vctrl_set_voltage() calls the
regulator_get_voltage() and regulator_set_voltage() and that will try to lock
again the dependent regulators (the regulator supplying the control voltage).

Fix the issue by exporting the unlocked version of the regulator_get_voltage()
and regulator_set_voltage() API so drivers that need it, like the voltage
controlled regulator driver can use it.

Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200116094543.2847321-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda: Fix SKL dai count

[ Upstream commit a6947c9d86bcfd61b758b5693eba58defe7fd2ae ]

With fourth pin added for iDisp for skl_dai, update SOF_SKL_DAI_NUM to
account for the change. Without this, dais from the bottom of the list
are skipped. In current state that's the case for 'Alt Analog CPU DAI'.

Fixes: ac42b142cd76 ("ASoC: SOF: Intel: hda: Add iDisp4 DAI")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113114054.9716-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

debugobjects: Fix various data races

[ Upstream commit 35fd7a637c42bb54ba4608f4d40ae6e55fc88781 ]

The counters obj_pool_free, and obj_nr_tofree, and the flag obj_freeing are
read locklessly outside the pool_lock critical sections. If read with plain
accesses, this would result in data races.

This is addressed as follows:

* reads outside critical sections become READ_ONCE()s (pairing with
   WRITE_ONCE()s added);

* writes become WRITE_ONCE()s (pairing with READ_ONCE()s added); since
   writes happen inside critical sections, only the write and not the read
   of RMWs needs to be atomic, thus WRITE_ONCE(var, var +/- X) is
   sufficient.

The data races were reported by KCSAN:

  BUG: KCSAN: data-race in __free_object / fill_pool

  write to 0xffffffff8beb04f8 of 4 bytes by interrupt on cpu 1:
   __free_object+0x1ee/0x8e0 lib/debugobjects.c:404
   __debug_check_no_obj_freed+0x199/0x330 lib/debugobjects.c:969
   debug_check_no_obj_freed+0x3c/0x44 lib/debugobjects.c:994
   slab_free_hook mm/slub.c:1422 [inline]

  read to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 2:
   fill_pool+0x3d/0x520 lib/debugobjects.c:135
   __debug_object_init+0x3c/0x810 lib/debugobjects.c:536
   debug_object_init lib/debugobjects.c:591 [inline]
   debug_object_activate+0x228/0x320 lib/debugobjects.c:677
   debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]

  BUG: KCSAN: data-race in __debug_object_init / fill_pool

  read to 0xffffffff8beb04f8 of 4 bytes by task 10 on cpu 6:
   fill_pool+0x3d/0x520 lib/debugobjects.c:135
   __debug_object_init+0x3c/0x810 lib/debugobjects.c:536
   debug_object_init_on_stack+0x39/0x50 lib/debugobjects.c:606
   init_timer_on_stack_key kernel/time/timer.c:742 [inline]

  write to 0xffffffff8beb04f8 of 4 bytes by task 1 on cpu 3:
   alloc_object lib/debugobjects.c:258 [inline]
   __debug_object_init+0x717/0x810 lib/debugobjects.c:544
   debug_object_init lib/debugobjects.c:591 [inline]
   debug_object_activate+0x228/0x320 lib/debugobjects.c:677
   debug_rcu_head_queue kernel/rcu/rcu.h:176 [inline]

  BUG: KCSAN: data-race in free_obj_work / free_object

  read to 0xffffffff9140c190 of 4 bytes by task 10 on cpu 6:
   free_object+0x4b/0xd0 lib/debugobjects.c:426
   debug_object_free+0x190/0x210 lib/debugobjects.c:824
   destroy_timer_on_stack kernel/time/timer.c:749 [inline]

  write to 0xffffffff9140c190 of 4 bytes by task 93 on cpu 1:
   free_obj_work+0x24f/0x480 lib/debugobjects.c:313
   process_one_work+0x454/0x8d0 kernel/workqueue.c:2264
   worker_thread+0x9a/0x780 kernel/workqueue.c:2410

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200116185529.11026-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog/softlockup: Enforce that timestamp is valid on boot

[ Upstream commit 11e31f608b499f044f24b20be73f1dcab3e43f8a ]

Robert reported that during boot the watchdog timestamp is set to 0 for one
second which is the indicator for a watchdog reset.

The reason for this is that the timestamp is in seconds and the time is
taken from sched clock and divided by ~1e9. sched clock starts at 0 which
means that for the first second during boot the watchdog timestamp is 0,
i.e. reset.

Use ULONG_MAX as the reset indicator value so the watchdog works correctly
right from the start. ULONG_MAX would only conflict with a real timestamp
if the system reaches an uptime of 136 years on 32bit and almost eternity
on 64bit.

Reported-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87o8v3uuzl.fsf@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/amd: Constrain Large Increment per Cycle events

[ Upstream commit 471af006a747f1c535c8a8c6c0973c320fe01b22 ]

AMD Family 17h processors and above gain support for Large Increment
per Cycle events.  Unfortunately there is no CPUID or equivalent bit
that indicates whether the feature exists or not, so we continue to
determine eligibility based on a CPU family number comparison.

For Large Increment per Cycle events, we add a f17h-and-compatibles
get_event_constraints_f17h() that returns an even counter bitmask:
Large Increment per Cycle events can only be placed on PMCs 0, 2,
and 4 out of the currently available 0-5.  The only currently
public event that requires this feature to report valid counts
is PMCx003 "Retired SSE/AVX Operations".

Note that the CPU family logic in amd_core_pmu_init() is changed
so as to be able to selectively add initialization for features
available in ranges of backward-compatible CPU families.  This
Large Increment per Cycle feature is expected to be retained
in future families.

A side-effect of assigning a new get_constraints function for f17h
disables calling the old (prior to f15h) amd_get_event_constraints
implementation left enabled by commit e40ed1542dd7 ("perf/x86: Add perf
support for AMD family-17h processors"), which is no longer
necessary since those North Bridge event codes are obsoleted.

Also fix a spelling mistake whilst in the area (calulating ->
calculating).

Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191114183720.19887-2-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/topology: Assert non-NUMA topology masks don't (partially) overlap

[ Upstream commit ccf74128d66ce937876184ad55db2e0276af08d3 ]

topology.c::get_group() relies on the assumption that non-NUMA domains do
not partially overlap. Zeng Tao pointed out in [1] that such topology
descriptions, while completely bogus, can end up being exposed to the
scheduler.

In his example (8 CPUs, 2-node system), we end up with:
  MC span for CPU3 == 3-7
  MC span for CPU4 == 4-7

The first pass through get_group(3, sdd@MC) will result in the following
sched_group list:

  3 -> 4 -> 5 -> 6 -> 7
  ^                  /
   `----------------'

And a later pass through get_group(4, sdd@MC) will "corrupt" that to:

  3 -> 4 -> 5 -> 6 -> 7
       ^             /
`-----------'

which will completely break things like 'while (sg != sd->groups)' when
using CPU3's base sched_domain.

There already are some architecture-specific checks in place such as
x86/kernel/smpboot.c::topology.sane(), but this is something we can detect
in the core scheduler, so it seems worthwhile to do so.

Warn and abort the construction of the sched domains if such a broken
topology description is detected. Note that this is somewhat
expensive (O(t.c²), 't' non-NUMA topology levels and 'c' CPUs) and could be
gated under SCHED_DEBUG if deemed necessary.

Testing
=======

Dietmar managed to reproduce this using the following qemu incantation:

  $ qemu-system-aarch64 -kernel ./Image -hda ./qemu-image-aarch64.img \
  -append 'root=/dev/vda console=ttyAMA0 loglevel=8 sched_debug' -smp \
  cores=8 --nographic -m 512 -cpu cortex-a53 -machine virt -numa \
  node,cpus=0-2,nodeid=0 -numa node,cpus=3-7,nodeid=1

alongside the following drivers/base/arch_topology.c hack (AIUI wouldn't be
needed if '-smp cores=X, sockets=Y' would work with qemu):

8<---
@@ -465,6 +465,9 @@ void update_siblings_masks(unsigned int cpuid)
if (cpuid_topo->package_id != cpu_topo->package_id)
continue;

+ if ((cpu < 4 && cpuid > 3) || (cpu > 3 && cpuid < 4))
+ continue;
+
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);

8<---

[1]: https://lkml.kernel.org/r/1577088979-8545-1-git-send-email-prime.zeng@hisilicon.com

Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200115160915.22575-1-valentin.schneider@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Fix size of rq::uclamp initialization

[ Upstream commit dcd6dffb0a75741471297724640733fa4e958d72 ]

rq::uclamp is an array of struct uclamp_rq, make sure we clear the
whole thing.

Fixes: 69842cba9ace ("sched/uclamp: Add CPU's clamp buckets refcountinga")
Signed-off-by: Li Guanglei <guanglei.li@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lkml.kernel.org/r/1577259844-12677-1-git-send-email-guangleix.li@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu

[ Upstream commit 3f03a58b25753843ce9e4511e9e246c51bd11011 ]

Add power-domains entry for smmu, so that the it is accessible as long
as the driver is active. Without this device shutdown is throwing the
below warning:
"[ 44.736348] arm-smmu-v3 36600000.smmu: failed to clear cr0"

Reported-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Remove set but not used variable 'ra', 'rs', 'rt'

[ Upstream commit 4de0a8355463e068e443b48eb5ae32370155368b ]

Fixes gcc '-Wunused-but-set-variable' warning:

arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:6: warning: variable ra set but not used [-Wunused-but-set-variable]
arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:10: warning: variable rs set but not used [-Wunused-but-set-variable]
arch/powerpc/kvm/emulate_loadstore.c: In function kvmppc_emulate_loadstore:
arch/powerpc/kvm/emulate_loadstore.c:87:14: warning: variable rt set but not used [-Wunused-but-set-variable]

They are not used since commit 2b33cb585f94 ("KVM: PPC: Reimplement
LOAD_FP/STORE_FP instruction mmio emulation with analyse_instr() input")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/sifive: Fix return value check in ecc_register()

[ Upstream commit 6cd18453b68942913fd3b1913b707646e544c2ac ]

In case of error, the function edac_device_alloc_ctl_info() returns a
NULL pointer, not ERR_PTR(). Replace the IS_ERR() test in the return
value check with a NULL test.

Fixes: 91abaeaaff35 ("EDAC/sifive: Add EDAC platform driver for SiFive SoCs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200115150303.112627-1-weiyongjun1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fixup DML dependencies

[ Upstream commit 34ad0230062c39cdcba564d16d122c0fb467a7d6 ]

[why]
Need to fix DML portability issues to enable SW unit testing around DML

[how]
Move calcs into dc include folder since multiple components reference it
Remove relative paths to external dependencies

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: fix alternatives with LLVM's integrated assembler

[ Upstream commit c54f90c2627cc316d365e3073614731e17dbc631 ]

LLVM's integrated assembler fails with the following error when
building KVM:

  <inline asm>:12:6: error: expected absolute expression
   .if kvm_update_va_mask == 0
       ^
  <inline asm>:21:6: error: expected absolute expression
   .if kvm_update_va_mask == 0
       ^
  <inline asm>:24:2: error: unrecognized instruction mnemonic
          NOT_AN_INSTRUCTION
          ^
  LLVM ERROR: Error parsing inline asm

These errors come from ALTERNATIVE_CB and __ALTERNATIVE_CFG,
which test for the existence of the callback parameter in inline
assembly using the following expression:

  " .if " __stringify(cb) " == 0\n"

This works with GNU as, but isn't supported by LLVM. This change
splits __ALTERNATIVE_CFG and ALTINSTR_ENTRY into separate macros
to fix the LLVM build.

Link: https://github.com/ClangBuiltLinux/linux/issues/472
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: lse: fix LSE atomics with LLVM's integrated assembler

[ Upstream commit e0d5896bd356cd577f9710a02d7a474cdf58426b ]

Unlike gcc, clang considers each inline assembly block to be independent
and therefore, when using the integrated assembler for inline assembly,
any preambles that enable features must be repeated in each block.

This change defines __LSE_PREAMBLE and adds it to each inline assembly
block that has LSE instructions, which allows them to be compiled also
with clang's assembler.

Link: https://github.com/ClangBuiltLinux/linux/issues/671
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Andrew Murray <andrew.murray@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Don't fake udata for kernel path

[ Upstream commit 4835709176e8ccf6561abc9f5c405293e008095f ]

Kernel paths must not set udata and provide NULL pointer,
instead of faking zeroed udata struct.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: add implicit fb quirk for MOTU M Series

[ Upstream commit c249177944b650816069f6c49b769baaa94339dc ]

This fixes crackling sound during playback.

Further note: MOTU is known for reusing Product IDs for different
devices or different generations of the device (e.g. MicroBook
I/II/IIc shares a single Product ID). This patch was only tested with
M4 audio interface, but the same Product ID is also used by M2. Hope
it will work for M2 as well.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200115151358.56672-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: essiv - fix AEAD capitalization and preposition use in help text

[ Upstream commit ab3d436bf3e9d05f58ceaa85ff7475bfcd6e45af ]

"AEAD" is capitalized everywhere else.
Use "an" when followed by a written or spoken vowel.

Fixes: be1eb7f78aa8fbe3 ("crypto: essiv - create wrapper template for ESSIV generation")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Don't destroy session if there are outstanding connections

[ Upstream commit 54155ed4199c7aa3fd20866648024ab63c96d579 ]

A faulty userspace that calls destroy_session() before destroying the
connections can trigger the failure.  This patch prevents the issue by
refusing to destroy the session if there are outstanding connections.

------------[ cut here ]------------
kernel BUG at mm/slub.c:306!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__slab_free+0x181/0x350
[...]
[ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246
[ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800
[ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40
[ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26
[ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00
[ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000
[ 1209.691213] FS:  00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000
[ 1209.692316] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0
[ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1209.695631] Call Trace:
[ 1209.695957]  ? __wake_up_common_lock+0x8a/0xc0
[ 1209.696712]  iscsi_pool_free+0x26/0x40
[ 1209.697263]  iscsi_session_teardown+0x2f/0xf0
[ 1209.698117]  iscsi_sw_tcp_session_destroy+0x45/0x60
[ 1209.698831]  iscsi_if_rx+0xd88/0x14e0
[ 1209.699370]  netlink_unicast+0x16f/0x200
[ 1209.699932]  netlink_sendmsg+0x21a/0x3e0
[ 1209.700446]  sock_sendmsg+0x4f/0x60
[ 1209.700902]  ___sys_sendmsg+0x2ae/0x320
[ 1209.701451]  ? cp_new_stat+0x150/0x180
[ 1209.701922]  __sys_sendmsg+0x59/0xa0
[ 1209.702357]  do_syscall_64+0x52/0x160
[ 1209.702812]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1209.703419] RIP: 0033:0x7f7946433914
[...]
[ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914
[ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005
[ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07
[ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038
[ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace a2d933ede7f730d8 ]---

Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.com
Signed-off-by: Nick Black <nlb@google.com>
Co-developed-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Salman Qazi <sqazi@google.com>
Co-developed-by: Junho Ryu <jayr@google.com>
Signed-off-by: Junho Ryu <jayr@google.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs-mediatek: add apply_dev_quirks variant operation

[ Upstream commit ea92c32bd336efba89c5b09cf609e6e26e963796 ]

Add vendor-specific variant callback "apply_dev_quirks" to MediaTek UFS
driver.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578726707-6596-3-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: pass device information to apply_dev_quirks

[ Upstream commit c40ad6b7fcd35bc4d36db820c7737e1aa18d5d41 ]

Pass UFS device information to vendor-specific variant callback
"apply_dev_quirks" because some platform vendors need to know such
information to apply special handling or quirks in specific devices.

At the same time, modify existing vendor implementations according to the
new interface for those vendor drivers which will be built-in or built as a
module alone with UFS core driver.

[mkp: clarified commit desc]

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578726707-6596-2-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: free sysfs kobject

[ Upstream commit 820d366736c949ffe698d3b3fe1266a91da1766d ]

Detected kmemleak.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: set I_LINKABLE early to avoid wrong access by vfs

[ Upstream commit 5b1dbb082f196278f82b6a15a13848efacb9ff11 ]

This patch moves setting I_LINKABLE early in rename2(whiteout) to avoid the
below warning.

[ 3189.163385] WARNING: CPU: 3 PID: 59523 at fs/inode.c:358 inc_nlink+0x32/0x40
[ 3189.246979] Call Trace:
[ 3189.248707]  f2fs_init_inode_metadata+0x2d6/0x440 [f2fs]
[ 3189.251399]  f2fs_add_inline_entry+0x162/0x8c0 [f2fs]
[ 3189.254010]  f2fs_add_dentry+0x69/0xe0 [f2fs]
[ 3189.256353]  f2fs_do_add_link+0xc5/0x100 [f2fs]
[ 3189.258774]  f2fs_rename2+0xabf/0x1010 [f2fs]
[ 3189.261079]  vfs_rename+0x3f8/0xaa0
[ 3189.263056]  ? tomoyo_path_rename+0x44/0x60
[ 3189.265283]  ? do_renameat2+0x49b/0x550
[ 3189.267324]  do_renameat2+0x49b/0x550
[ 3189.269316]  __x64_sys_renameat2+0x20/0x30
[ 3189.271441]  do_syscall_64+0x5a/0x230
[ 3189.273410]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 3189.275848] RIP: 0033:0x7f270b4d9a49

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: unlock on error in probe

[ Upstream commit a3afa29942b84b4e2548beacccc3a68b8d77e3dc ]

We need to unlock before we returning on this error path.

Fixes: 73ac9f5e5b43 ("ALSA: usb-audio: Add boot quirk for MOTU M Series")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200115174604.rhanfgy4j3uc65cx@kili.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE

[ Upstream commit d71e01716b3606a6648df7e5646ae12c75babde4 ]

If, for some bizarre reason, the compiler decided to split up the write
of STE DWORD 0, we could end up making a partial structure valid.

Although this probably won't happen, follow the example of the
context-descriptor code and use WRITE_ONCE() to ensure atomicity of the
write.

Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: remove *.tmp file when filechk fails

[ Upstream commit 88fe89a47153facd8cb2d06d5c8727f7224c43c2 ]

Bartosz Golaszewski reports that when "make {menu,n,g,x}config" fails
due to missing packages, a temporary file is left over, which is not
ignored by git.

For example, if GTK+ is not installed:

  $ make gconfig
  *
  * Unable to find the GTK+ installation. Please make sure that
  * the GTK+ 2.0 development package is correctly installed.
  * You need gtk+-2.0 gmodule-2.0 libglade-2.0
  *
  scripts/kconfig/Makefile:208: recipe for target 'scripts/kconfig/gconf-cfg' failed
  make[1]: *** [scripts/kconfig/gconf-cfg] Error 1
  Makefile:567: recipe for target 'gconfig' failed
  make: *** [gconfig] Error 2
  $ git status
  HEAD detached at v5.4
  Untracked files:
    (use "git add <file>..." to include in what will be committed)

          scripts/kconfig/gconf-cfg.tmp

  nothing added to commit but untracked files present (use "git add" to track)

This is because the check scripts are run with filechk, which misses
to clean up the temporary file on failure.

When the line

  { $(filechk_$(1)); } > $@.tmp;

... fails, it exits immediately due to the 'set -e'. Use trap to make
sure to delete the temporary file on exit.

For extra safety, I replaced $@.tmp with $(dot-target).tmp to make it
a hidden file.

Reported-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue

[ Upstream commit 91b6dec32e5c25fbdbb564d1e5af23764ec17ef1 ]

We currently have musb_set_vbus() called from two different paths. Mostly
it gets called from the USB PHY via omap_musb_set_mailbox(), but in some
cases it can get also called from musb_stage0_irq() rather via .set_vbus:

(musb_set_host [musb_hdrc])
(omap2430_musb_set_vbus [omap2430])
(musb_stage0_irq [musb_hdrc])
(musb_interrupt [musb_hdrc])
(omap2430_musb_interrupt [omap2430])

This is racy and will not work with introducing generic helper functions
for musb_set_host() and musb_set_peripheral(). We want to get rid of the
busy loops in favor of usleep_range().

Let's just get rid of .set_vbus for omap2430 glue layer and let the PHY
code handle VBUS with musb_set_vbus(). Note that in the follow-up patch
we can completely remove omap2430_musb_set_vbus(), but let's do it in a
separate patch as this change may actually turn out to be needed as a
fix.

Reported-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200115132547.364-5-b-liu@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/imx_ddr: Fix cpu hotplug state cleanup

[ Upstream commit 9ee68b314e9aa63ed11b98beb8a68810b8234dcf ]

This driver allocates a dynamic cpu hotplug state but never releases it.
If reloaded in a loop it will quickly trigger a WARN message:

"No more dynamic states available for CPU hotplug"

Fix by calling cpuhp_remove_multi_state on remove like several other
perf pmu drivers.

Also fix the cleanup logic on probe error paths: add the missing
cpuhp_remove_multi_state call and properly check the return value from
cpuhp_state_add_instant_nocalls.

Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf")
Acked-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: prevent memory leak in vmw_cmdbuf_res_add

[ Upstream commit 40efb09a7f53125719e49864da008495e39aaa1e ]

In vmw_cmdbuf_res_add if drm_ht_insert_item fails the allocated memory
for cres should be released.

Fixes: 18e4a4669c50 ("drm/vmwgfx: Fix compat shader namespace")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: Set lockdep class for hierarchical irq domains

[ Upstream commit c34f6dc8c9e6bbe9fba1d53acd6d9a3889599da3 ]

I see the following lockdep splat in the qcom pinctrl driver when
attempting to suspend the device.

============================================
WARNING: possible recursive locking detected
5.4.2 #2 Tainted: G S
--------------------------------------------
cat/6536 is trying to acquire lock:
ffffff814787ccc0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

but task is already holding lock:
ffffff81436740c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

7 locks held by cat/6536:
  #0: ffffff8140e0c420 (sb_writers#7){.+.+}, at: vfs_write+0xc8/0x19c
  #1: ffffff8121eec480 (&of->mutex){+.+.}, at: kernfs_fop_write+0x128/0x1f4
  #2: ffffff8147cad668 (kn->count#263){.+.+}, at: kernfs_fop_write+0x130/0x1f4
  #3: ffffffd011446000 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x354
  #4: ffffff814302b970 (&dev->mutex){....}, at: __device_suspend+0x16c/0x420
  #5: ffffff81436740c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94
  #6: ffffff81479b8c10 (&pctrl->lock){....}, at: msm_gpio_irq_set_wake+0x48/0x7c

stack backtrace:
CPU: 4 PID: 6536 Comm: cat Tainted: G S                5.4.2 #2
Call trace:
  dump_backtrace+0x0/0x174
  show_stack+0x20/0x2c
  dump_stack+0xdc/0x144
  __lock_acquire+0x52c/0x2268
  lock_acquire+0x1dc/0x220
  _raw_spin_lock_irqsave+0x64/0x80
  __irq_get_desc_lock+0x64/0x94
  irq_set_irq_wake+0x40/0x144
  msm_gpio_irq_set_wake+0x5c/0x7c
  set_irq_wake_real+0x40/0x5c
  irq_set_irq_wake+0x70/0x144
  cros_ec_rtc_suspend+0x38/0x4c
  platform_pm_suspend+0x34/0x60
  dpm_run_callback+0x64/0xcc
  __device_suspend+0x314/0x420
  dpm_suspend+0xf8/0x298
  dpm_suspend_start+0x84/0xb4
  suspend_devices_and_enter+0xbc/0x628
  pm_suspend+0x214/0x354
  state_store+0xb0/0x108
  kobj_attr_store+0x14/0x24
  sysfs_kf_write+0x4c/0x64
  kernfs_fop_write+0x158/0x1f4
  __vfs_write+0x54/0x18c
  vfs_write+0xdc/0x19c
  ksys_write+0x7c/0xe4
  __arm64_sys_write+0x20/0x2c
  el0_svc_common+0xa8/0x160
  el0_svc_compat_handler+0x2c/0x38
  el0_svc_compat+0x8/0x10

This is because the msm_gpio_irq_set_wake() function calls
irq_set_irq_wake() as a backup in case the irq comes in during the path
to idle. Given that we're calling irqchip functions from within an
irqchip we need to set the lockdep class to be different for this child
controller vs. the default one that the parent irqchip gets.

This used to be done before this driver was converted to hierarchical
irq domains in commit e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in
hierarchy") via the gpiochip_irq_map() function. With hierarchical irq
domains this function has been replaced by
gpiochip_hierarchy_irq_domain_alloc(). Therefore, set the lockdep class
like was done previously in the irq domain path so we can avoid this
lockdep warning.

Fixes: fdd61a013a24 ("gpio: Add support for hierarchical IRQ domains")
Cc: Thierry Reding <treding@nvidia.com>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200114231103.85641-1-swboyd@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm thin: don't allow changing data device during thin-pool reload

[ Upstream commit 873937e75f9a8ea231a502c3d29d9cb6ad91b3ef ]

The existing code allows changing the data device when the thin-pool
target is reloaded.

This capability is not required and only complicates device lifetime
guarantees. This can cause crashes like the one reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=1788596
where the kernel tries to issue a flush bio located in a structure that
was already freed.

Take the first step to simplifying the thin-pool's data device lifetime
by disallowing changing it. Like the thin-pool's metadata device, the
data device is now set in pool_create() and it cannot be changed for a
given thin-pool.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/fault/gv100-: fix memory leak on module unload

[ Upstream commit 633cc9beeb6f9b5fa2f17a2a9d0e2790cb6c3de7 ]

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/drm/ttm: Remove set but not used variable 'mem'

[ Upstream commit 2e4534a22794746b11a794b2229b8d58797eccce ]

drivers/gpu/drm/nouveau/nouveau_ttm.c: In function nouveau_vram_manager_new:
drivers/gpu/drm/nouveau/nouveau_ttm.c:66:22: warning: variable mem set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/nouveau/nouveau_ttm.c: In function nouveau_gart_manager_new:
drivers/gpu/drm/nouveau/nouveau_ttm.c:106:22: warning: variable mem set but not used [-Wunused-but-set-variable]

They are not used any more, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: Fix copy-paste error in nouveau_fence_wait_uevent_handler

[ Upstream commit 1eb013473bff5f95b6fe1ca4dd7deda47257b9c2 ]

Like other cases, it should use rcu protected 'chan' rather
than 'fence->channel' in nouveau_fence_wait_uevent_handler.

Fixes: 0ec5f02f0e2c ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/gr/gk20a,gm200-: add terminators to method lists read from fw

[ Upstream commit 7adc77aa0e11f25b0e762859219c70852cd8d56f ]

Method init is typically ordered by class in the FW image as ThreeD,
TwoD, Compute.

Due to a bug in parsing the FW into our internal format, we've been
accidentally sending Twod + Compute methods to the ThreeD class, as
well as Compute methods to the TwoD class - oops.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/secboot/gm20b: initialize pointer in gm20b_secboot_new()

[ Upstream commit 3613a9bea95a1470dd42e4ed1cc7d86ebe0a2dc0 ]

We accidentally set "psb" which is a no-op instead of "*psb" so it
generates a static checker warning. We should probably set it before
the first error return so that it's always initialized.

Fixes: 923f1bd27bf1 ("drm/nouveau/secboot/gm20b: add secure boot support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vme: bridges: reduce stack usage

[ Upstream commit 7483e7a939c074d887450ef1c4d9ccc5909405f8 ]

With CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the stack usage in vme_fake
grows above the warning limit:

drivers/vme/bridges/vme_fake.c: In function 'fake_master_read':
drivers/vme/bridges/vme_fake.c:610:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
drivers/vme/bridges/vme_fake.c: In function 'fake_master_write':
drivers/vme/bridges/vme_fake.c:797:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

The problem is that in some configurations, each call to
fake_vmereadX() puts another variable on the stack.

Reduce the amount of inlining to get back to the previous state,
with no function using more than 200 bytes each.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107200610.3482901-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Return -EBADRQC for invalid map type in __bpf_tx_xdp_map

[ Upstream commit 0a29275b6300f39f78a87f2038bbfe5bdbaeca47 ]

A negative value should be returned if map->map_type is invalid
although that is impossible now, but if we run into such situation
in future, then xdpbuff could be leaked.

Daniel Borkmann suggested:

-EBADRQC should be returned to stay consistent with generic XDP
for the tracepoint output and not to be confused with -EOPNOTSUPP
from other locations like dev_map_enqueue() when ndo_xdp_xmit is
missing and such.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1578618277-18085-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda-dai: fix compilation warning in pcm_prepare

[ Upstream commit d873997192ddcacb5333575502be2f91ea4b47b8 ]

Fix GCC warning with W=1, previous cleanup did not remove unnecessary
variable.

sound/soc/sof/intel/hda-dai.c: In function ‘hda_link_pcm_prepare’:

sound/soc/sof/intel/hda-dai.c:265:31: warning: variable ‘hda_stream’
set but not used [-Wunused-but-set-variable]
265 | struct sof_intel_hda_stream *hda_stream;
| ^~~~~~~~~~

Fixes: a3ebccb52efdf ("ASoC: SOF: Intel: hda: reset link DMA state in prepare")
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113205620.27285-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Print device when resources present in really_probe()

[ Upstream commit 7c35e699c88bd60734277b26962783c60e04b494 ]

If a device already has devres items attached before probing, a warning
backtrace is printed. However, this backtrace does not reveal the
offending device, leaving the user uninformed. Furthermore, using
WARN_ON() causes systems with panic-on-warn to reboot.

Fix this by replacing the WARN_ON() by a dev_crit() message.
Abort probing the device, to prevent doing more damage to the device's
resources.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191206132219.28908-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: platform: Prevent resouce overflow from causing infinite loops

[ Upstream commit 39cc539f90d035a293240c9443af50be55ee81b8 ]

num_resources in the platform_device struct is declared as a u32. The
for loops that iterate over num_resources use an int as the counter,
which can cause infinite loops on architectures with smaller ints.
Change the loop counters to u32.

Signed-off-by: Simon Schwartz <kern.simon@theschwartz.xyz>
Link: https://lore.kernel.org/r/2201ce63a2a171ffd2ed14e867875316efcf71db.camel@theschwartz.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

visorbus: fix uninitialized variable access

[ Upstream commit caf82f727e69b647f09d57a1fc56e69d22a5f483 ]

The setup_crash_devices_work_queue function only partially initializes
the message it sends to chipset_init, leading to undefined behavior:

drivers/visorbus/visorchipset.c: In function 'setup_crash_devices_work_queue':
drivers/visorbus/visorchipset.c:333:6: error: '((unsigned char*)&msg.hdr.flags)[0]' is used uninitialized in this function [-Werror=uninitialized]
if (inmsg->hdr.flags.response_expected)

Set up the entire structure, zero-initializing the 'response_expected'
flag.

This was apparently found by the patch that added the -O3 build option
in Kconfig.

Fixes: 12e364b9f08a ("staging: visorchipset driver to provide registration and other services")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107202950.782951-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: xilinx_sdfec: fix xsdfec_poll()'s return type

[ Upstream commit fa4e7fc1386078edcfddd8848cb0374f4af74fe7 ]

xsdfec_poll() is defined as returning 'unsigned int' but the
.poll method is declared as returning '__poll_t', a bitwise type.

Fix this by using the proper return type and using the EPOLL
constants instead of the POLL ones, as required for __poll_t.

CC: Derek Kiernan <derek.kiernan@xilinx.com>
CC: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Link: https://lore.kernel.org/r/20191209213655.57985-1-luc.vanoostenryck@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: synclink_gt: Adjust indentation in several functions

[ Upstream commit 446e76873b5e4e70bdee5db2f2a894d5b4a7d081 ]

Clang warns:

../drivers/tty/synclink_gt.c:1337:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (C_CRTSCTS(tty)) {
        ^
../drivers/tty/synclink_gt.c:1335:2: note: previous statement is here
        if (I_IXOFF(tty))
        ^
../drivers/tty/synclink_gt.c:2563:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
        ^
../drivers/tty/synclink_gt.c:2561:2: note: previous statement is here
        if (I_INPCK(info->port.tty))
        ^
../drivers/tty/synclink_gt.c:3221:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
        set_signals(info);
        ^
../drivers/tty/synclink_gt.c:3219:2: note: previous statement is here
        else
        ^
3 warnings generated.

The indentation on these lines is not at all consistent, tabs and spaces
are mixed together. Convert to just using tabs to be consistent with the
Linux kernel coding style and eliminate these warnings from clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/822
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20191218023912.13827-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: synclinkmp: Adjust indentation in several functions

[ Upstream commit 1feedf61e7265128244f6993f23421f33dd93dbc ]

Clang warns:

../drivers/tty/synclinkmp.c:1456:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (C_CRTSCTS(tty)) {
        ^
../drivers/tty/synclinkmp.c:1453:2: note: previous statement is here
        if (I_IXOFF(tty))
        ^
../drivers/tty/synclinkmp.c:2473:8: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                                                info->port.tty->hw_stopped = 0;
                                                ^
../drivers/tty/synclinkmp.c:2471:7: note: previous statement is here
                                                if ( debug_level >= DEBUG_LEVEL_ISR )
                                                ^
../drivers/tty/synclinkmp.c:2482:8: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                                                info->port.tty->hw_stopped = 1;
                                                ^
../drivers/tty/synclinkmp.c:2480:7: note: previous statement is here
                                                if ( debug_level >= DEBUG_LEVEL_ISR )
                                                ^
../drivers/tty/synclinkmp.c:2809:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
        ^
../drivers/tty/synclinkmp.c:2807:2: note: previous statement is here
        if (I_INPCK(info->port.tty))
        ^
../drivers/tty/synclinkmp.c:3246:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
        set_signals(info);
        ^
../drivers/tty/synclinkmp.c:3244:2: note: previous statement is here
        else
        ^
5 warnings generated.

The indentation on these lines is not at all consistent, tabs and spaces
are mixed together. Convert to just using tabs to be consistent with the
Linux kernel coding style and eliminate these warnings from clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/823
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20191218024720.3528-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

raid6/test: fix a compilation warning

[ Upstream commit 5e5ac01c2b8802921fee680518a986011cb59820 ]

The compilation warning is redefination showed as following:

        In file included from tables.c:2:
        ../../../include/linux/export.h:180: warning: "EXPORT_SYMBOL" redefined
         #define EXPORT_SYMBOL(sym)  __EXPORT_SYMBOL(sym, "")

        In file included from tables.c:1:
        ../../../include/linux/raid/pq.h:61: note: this is the location of the previous definition
         #define EXPORT_SYMBOL(sym)

Fixes: 69a94abb82ee ("export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols")
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m

[ Upstream commit 8fea78029f5e6ed734ae1957bef23cfda1af4354 ]

If CONFIG_SND_ATMEL_SOC_DMA=m, build error:

sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio':
(.text+0x7cd): undefined reference to `atmel_pcm_dma_platform_register'

Function atmel_pcm_dma_platform_register is defined under
CONFIG SND_ATMEL_SOC_DMA, so select SND_ATMEL_SOC_DMA in
CONFIG SND_ATMEL_SOC_SSC, same to CONFIG_SND_ATMEL_SOC_PDC.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Link: https://lore.kernel.org/r/20200113133242.144550-1-chenzhou10@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Add boot quirk for MOTU M Series

[ Upstream commit 73ac9f5e5b43a5dbadb61f27dae7a971f7ec0d22 ]

Add delay to make sure that audio urbs are not sent too early.
Otherwise the device hangs. Windows driver makes ~2s delay, so use
about the same time delay value.

snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which
is an overkill. Thus a quirk that is called only once is implemented.

Also send two vendor-specific control messages before and after
the delay. This behaviour is blindly copied from the Windows driver.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200112102358.18085-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc

[ Upstream commit cf206bca178cd5b5a436494b2e0cea75295944f4 ]

An experimental test with the command below gives this error:
rk3188-bqedison2qc.dt.yaml: dwmmc@10218000: wifi@1:
'reg' is a required property

So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110134420.11280-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: add reg property to brcmf sub-nodes

[ Upstream commit 96ff264bccb22175bbe2185a1eb5204ca3c5f03f ]

An experimental test with the command below gives this error:
rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: fix dwmmc clock name for px30

[ Upstream commit 7f2147350291569acd1df5a26dcdfc573916016f ]

An experimental test with the command below gives this error:
px30-evb.dt.yaml: dwmmc@ff390000: clock-names:2:
'ciu-drive' was expected

'ciu-drv' is not a valid dwmmc clock name,
so fix this by changing it to 'ciu-drive'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110161200.22755-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource: davinci: only enable clockevents once tim34 is initialized

[ Upstream commit cea931c25104e6bddc42eb067f58193f355dbdd7 ]

The DM365 platform has a strange quirk (only present when using ancient
u-boot - mainline u-boot v2013.01 and later works fine) where if we
enable the second half of the timer in periodic mode before we do its
initialization - the time won't start flowing and we can't boot.

When using more recent u-boot, we can enable the timer, then reinitialize
it and all works fine.

To work around this issue only enable clockevents once tim34 is
initialized i.e. move clockevents_config_and_register() below tim34
initialization.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wan: ixp4xx_hss: fix compile-testing on 64-bit

[ Upstream commit 504c28c853ec5c626900b914b5833daf0581a344 ]

Change the driver to use portable integer types to avoid
warnings during compile testing:

drivers/net/wan/ixp4xx_hss.c:863:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast]
        memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
                           ^
drivers/net/wan/ixp4xx_hss.c:979:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
                                              &port->desc_tab_phys)))
                                              ^~~~~~~~~~~~~~~~~~~~
include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here
                     dma_addr_t *handle);
                                 ^

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/nmi: Remove irq_work from the long duration NMI handler

[ Upstream commit 248ed51048c40d36728e70914e38bffd7821da57 ]

First, printk() is NMI-context safe now since the safe printk() has been
implemented and it already has an irq_work to make NMI-context safe.

Second, this NMI irq_work actually does not work if a NMI handler causes
panic by watchdog timeout. It has no chance to run in such case, while
the safe printk() will flush its per-cpu buffers before panicking.

While at it, repurpose the irq_work callback into a function which
concentrates the NMI duration checking and makes the code easier to
follow.

[ bp: Massage. ]

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200111125427.15662-1-changbin.du@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt: Detach page from page pool before sending up the stack

[ Upstream commit 3071c51783b39d6a676d02a9256c3b3f87804285 ]

When running in XDP mode, pages come from the page pool, and should
be freed back to the same pool or specifically detached. Currently,
when the driver re-initializes, the page pool destruction is delayed
forever since it thinks there are oustanding pages.

Fixes: 322b87ca55f2 ("bnxt_en: add page_pool support")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: edt-ft5x06 - work around first register access error

[ Upstream commit e112324cc0422c046f1cf54c56f333d34fa20885 ]

The EP0700MLP1 returns bogus data on the first register read access
(reading the threshold parameter from register 0x00):

edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40

It ignores writes until then. This patch adds a dummy read after which
the number of sensors and parameter read/writes work correctly.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls

[ Upstream commit 860c8802ace14c646864795e057349c9fb2d60ad ]

Eric Dumazet supplied a KCSAN report of a bug that forces use
of hlist_unhashed_lockless() from sk_unhashed():

------------------------------------------------------------------------

BUG: KCSAN: data-race in inet_unhash / inet_unhash

write to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 1:
__hlist_nulls_del include/linux/list_nulls.h:88 [inline]
hlist_nulls_del_init_rcu include/linux/rculist_nulls.h:36 [inline]
__sk_nulls_del_node_init_rcu include/net/sock.h:676 [inline]
inet_unhash+0x38f/0x4a0 net/ipv4/inet_hashtables.c:612
tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249
tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854
tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56
tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599
tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619
call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786
__do_softirq+0x115/0x33f kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0xbb/0xe0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x1af/0x280 kernel/sched/idle.c:263
cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355
start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

read to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 0:
sk_unhashed include/net/sock.h:607 [inline]
inet_unhash+0x3d/0x4a0 net/ipv4/inet_hashtables.c:592
tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249
tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854
tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56
tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599
tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619
call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786
__do_softirq+0x115/0x33f kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0xbb/0xe0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x1af/0x280 kernel/sched/idle.c:263
cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355
rest_init+0xec/0xf6 init/main.c:452
arch_call_rest_init+0x17/0x37
start_kernel+0x838/0x85e init/main.c:786
x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490
x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc6+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011

------------------------------------------------------------------------

This commit therefore replaces C-language assignments with WRITE_ONCE()
in include/linux/list_nulls.h and include/linux/rculist_nulls.h.

Reported-by: Eric Dumazet <edumazet@google.com> # For KCSAN
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/x86: Don't panic or BUG() on non-critical error conditions

[ Upstream commit e2d68a955e49d61fd0384f23e92058dc9b79be5e ]

The logic in __efi_enter_virtual_mode() does a number of steps in
sequence, all of which may fail in one way or the other. In most
cases, we simply print an error and disable EFI runtime services
support, but in some cases, we BUG() or panic() and bring down the
system when encountering conditions that we could easily handle in
the same way.

While at it, replace a pointless page-to-virt-phys conversion with
one that goes straight from struct page to physical.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Matthew Garrett <mjg59@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20200103113953.9571-14-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: fuse: Correct straps' address for older Tegra124 device trees

[ Upstream commit 2d9ea1934f8ef0dfb862d103389562cc28b4fc03 ]

Trying to read out Chip ID before APBMISC registers are mapped won't
succeed, in a result Tegra124 gets a wrong address for the HW straps
register if machine uses an old outdated device tree.

Fixes: 297c4f3dcbff ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Add RcvShortLengthErrCnt to hfi1stats

[ Upstream commit 2c9d4e26d1ab27ceae2ded2ffe930f8e5f5b2a89 ]

This counter, RxShrErr, is required for error analysis and debug.

Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200106134235.119356.29123.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Add software counter for ctxt0 seq drop

[ Upstream commit 5ffd048698ea5139743acd45e8ab388a683642b8 ]

All other code paths increment some form of drop counter.

This was missed in the original implementation.

Fixes: 82c2611daaf0 ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0")
Link: https://lore.kernel.org/r/20200106134228.119356.96828.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8188: avoid excessive stack usage

[ Upstream commit c497ae2077c055b85c1bf04f3d182a84bd8f365b ]

The rtl8188 copy of the os_dep support code causes a
warning about a very significant stack usage in the translate_scan()
function:

drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function 'translate_scan':
drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:306:1: error: the frame size of 1560 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]

Use the same trick as in the rtl8723bs copy of the same function, and
allocate it dynamically.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200104214832.558198-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Add gamma property according to hardware capability

[ Upstream commit 4cebc1de506fa753301266a5a23bb21bca52ad3a ]

If there is no gamma function in the crtc
display path, don't add gamma property
for crtc

Fixes: 2f3f4dda747c ("drm/mediatek: Add gamma correction.")
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udf: Fix free space reporting for metadata and virtual partitions

[ Upstream commit a4a8b99ec819ca60b49dc582a4287ef03411f117 ]

Free space on filesystems with metadata or virtual partition maps
currently gets misreported. This is because these partitions are just
remapped onto underlying real partitions from which keep track of free
blocks. Take this remapping into account when counting free blocks as
well.

Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usbip: Fix unsafe unaligned pointer usage

[ Upstream commit 585c91f40d201bc564d4e76b83c05b3b5363fe7e ]

Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool
build fails with new gcc -Werror=address-of-packed-member checks.

usbip_network.c: In function ‘usbip_net_pack_usb_device’:
usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
79 | usbip_net_pack_uint32_t(pack, &udev->busnum);

Fix with minor changes to pass by value instead of by address.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco

[ Upstream commit 0ff15a86d0c5a3f004fee2e92d65b88e56a3bc58 ]

Add a fixed regulator and use it as power supply for DSI panel.

Fixes: 18c8866266 ("ARM: dts: stm32: Add display support on stm32f469-disco")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: use proper initializers for property entries

[ Upstream commit 5eb5afb07853d6e90d3a2b230c825e028e948f79 ]

We should not be reaching into property entries and initialize them by
hand, but rather use proper initializer macros. This way we can alter
internal representation of property entries with no visible changes to
their users.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: remove the newline for CRC source name.

[ Upstream commit 72a848f5c46bab4c921edc9cbffd1ab273b2be17 ]

userspace may transfer a newline, and this terminating newline
is replaced by a '\0' to avoid followup issues.

'len-1' is the index to replace the newline of CRC source name.

v3: typo fix (Sam)

v2: update patch subject, body and format. (Sam)

Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610134751.14356-1-dingchen.zhang@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Avoid printing address of mtt page

[ Upstream commit eca44507c3e908b7362696a4d6a11d90371334c6 ]

Address of a page shouldn't be printed in case of security issues.

Link: https://lore.kernel.org/r/1578313276-29080-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlx5: work around high stack usage with gcc

[ Upstream commit 42ae1a5c76691928ed217c7e40269db27f5225e9 ]

In some configurations, gcc tries too hard to optimize this code:

drivers/net/ethernet/mellanox/mlx5/core/en_stats.c: In function 'mlx5e_grp_sw_update_stats':
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c:302:1: error: the frame size of 1336 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

As was stated in the bug report, the reason is that gcc runs into a corner
case in the register allocator that is rather hard to fix in a good way.

As there is an easy way to work around it, just add a comment and the
barrier that stops gcc from trying to overoptimize the function.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92657
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix permissions of hang_hws

[ Upstream commit 2bdac179e217a0c0b548a8c60524977586621b19 ]

Reading from /sys/kernel/debug/kfd/hang_hws would cause a kernel
oops because we didn't implement a read callback. Set the permission
to write-only to prevent that.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Avoid sending invalid page response

[ Upstream commit 5f75585e19cc7018bf2016aa771632081ee2f313 ]

Page responses should only be sent when last page in group (LPIG) or
private data is present in the page request. This patch avoids sending
invalid descriptors.

Fixes: 5d308fc1ecf53 ("iommu/vt-d: Add 256-bit invalidation descriptor support")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Match CPU and IOMMU paging mode

[ Upstream commit 79db7e1b4cf2a006f556099c13de3b12970fc6e3 ]

When setting up first level page tables for sharing with CPU, we need
to ensure IOMMU can support no less than the levels supported by the
CPU.

It is not adequate, as in the current code, to set up 5-level paging
in PASID entry First Level Paging Mode(FLPM) solely based on CPU.

Currently, intel_pasid_setup_first_level() is only used by native SVM
code which already checks paging mode matches. However, future use of
this helper function may not be limited to native SVM.
https://lkml.org/lkml/2019/11/18/1037

Fixes: 437f35e1cd4c8 ("iommu/vt-d: Add first level page table interface")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch

[ Upstream commit 0528904926aab19bffb2068879aa44db166c6d5f ]

Running evemu-record on the lid switch event shows that the lid reports
the first "close" but then never reports an "open". This causes systemd
to continuously re-suspend the laptop every 30s. Resetting the _LID to
"open" fixes the issue.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_rt5682: Ignore the speaker amp when there isn't one.

[ Upstream commit d4b74e218a8d0d6cf58e546627ab9d4d4f2645ab ]

Some members of the Google_Hatch family include a rt5682 jack codec, but
no speaker amplifier. This uses the same driver (sof_rt5682) as a
combination of rt5682 jack codec and max98357a speaker amplifier. Within
the sof_rt5682 driver, these cases are not currently distinguishable,
relying on a DMI quirk to decide the configuration. This causes an
incorrect configuration when only the rt5682 is present on a
Google_Hatch device.

For CML, the jack codec is used as the primary key when matching,
with a possible speaker amplifier described in quirk_data. The two cases
of interest are the second and third 10EC5682 entries in
snd_soc_acpi_intel_cml_machines[]. The second entry matches the
combination of rt5682 and max98357a, resulting in the quirk_data field
in the snd_soc_acpi_mach being non-null, pointing at
max98357a_spk_codecs, the snd_soc_acpi_codecs for the matched speaker
amplifier. The third entry matches just the rt5682, resulting in a null
quirk_data.

The sof_rt5682 driver's DMI data matching identifies that a speaker
amplifier is present for all Google_Hatch family devices. Detect cases
where there is no speaker amplifier by checking for a null quirk_data in
the snd_soc_acpi_mach and remove the speaker amplifier bit in that case.

Signed-off-by: Sam McNally <sammc@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200103124921.v3.1.Ib87c4a7fbb3fc818ea12198e291b87dc2d5bc8c2@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/spapr/nvlink2: Skip unpinning pages on error exit

[ Upstream commit 338b4e10f939a71194d8ecef7ece205a942cec05 ]

The nvlink2 subdriver for IBM Witherspoon machines preregisters
GPU memory in the IOMMI API so KVM TCE code can map this memory
for DMA as well. This is done by mm_iommu_newdev() called from
vfio_pci_nvgpu_regops::mmap.

In an unlikely event of failure the data->mem remains NULL and
since mm_iommu_put() (which unregisters the region and unpins memory
if that was regular memory) does not expect mem=NULL, it should not be
called.

This adds a check to only call mm_iommu_put() for a valid data->mem.

Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools lib api fs: Fix gcc9 stringop-truncation compilation error

[ Upstream commit 6794200fa3c9c3e6759dae099145f23e4310f4f7 ]

GCC9 introduced string hardening mechanisms, which exhibits the error
during fs api compilation:

error: '__builtin_strncpy' specified bound 4096 equals destination size
[-Werror=stringop-truncation]

This comes when the length of copy passed to strncpy is is equal to
destination size, which could potentially lead to buffer overflow.

There is a need to mitigate this potential issue by limiting the size of
destination by 1 and explicitly terminate the destination with NULL.

Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: fixed_phy: fix use-after-free when checking link GPIO

[ Upstream commit d266f19f3ae7fbcaf92229639b78d2110ae44f33 ]

If we fail to locate GPIO for any reason other than deferral or
not-found-GPIO, we try to print device tree node info, however if might
be freed already as we called of_node_put() on it.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: sh: Fix compile warning wrt const

[ Upstream commit f1dd4795b1523fbca7ab4344dd5a8bb439cc770d ]

A long-standing compile warning was seen during build test:
sound/sh/aica.c: In function 'load_aica_firmware':
sound/sh/aica.c:521:25: warning: passing argument 2 of 'spu_memload' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]

Fixes: 198de43d758c ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device")
Link: https://lore.kernel.org/r/20200105144823.29547-69-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Apply mic mute LED quirk for Dell E7xx laptops, too

[ Upstream commit 5fab5829674c279839a7408ab30c71c6dfe726b9 ]

Dell E7xx laptops have also mic mute LED that is driven by the
dell-laptop platform driver. Bind it with the capture control as
already done for other models.

A caveat is that the fixup hook for the mic mute LED has to be applied
at last, otherwise it results in the invalid override of the callback.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205529
Link: https://lore.kernel.org/r/20200105081119.21396-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: uniphier: Add SCSSI clock gate for each channel

[ Upstream commit 1ec09a2ec67a0baa46a3ccac041dbcdbc6db2cb9 ]

SCSSI has clock gates for each channel in the SoCs newer than Pro4,
so this adds missing clock gates for channel 1, 2 and 3. And more, this
moves MCSSI clock ID after SCSSI.

Fixes: ff388ee36516 ("clk: uniphier: add clock frequency support for SPI")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lkml.kernel.org/r/1577410925-22021-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: Use parent node pointer during registration if necessary

[ Upstream commit 9011f92622e5ef2d075f45e5fa818776d4feb8c0 ]

Sometimes clk drivers are attached to devices which are children of a
parent device that is connected to a node in DT. This happens when
devices are MFD-ish and the parent device driver mostly registers child
devices to match against drivers placed in their respective subsystem
directories like drivers/clk, drivers/regulator, etc. When the clk
driver calls clk_register() with a device pointer, that struct device
pointer won't have a device_node associated with it because it was
created purely in software as a way to partition logic to a subsystem.

This causes problems for the way we find parent clks for the clks
registered by these child devices because we look at the registering
device's device_node pointer to lookup 'clocks' and 'clock-names'
properties. Let's use the parent device's device_node pointer if the
registering device doesn't have a device_node but the parent does. This
simplifies clk registration code by avoiding the need to assign some
device_node to the device registering the clk.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20191230190455.141339-1-sboyd@kernel.org
[sboyd@kernel.org: Fixup kernel-doc notation]
Reviewed-by: Niklas Cassel <nks@flawful.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: sh: Fix unused variable warnings

[ Upstream commit 5da116f164ce265e397b8f59af5c39e4a61d61a5 ]

Remove unused variables that are left over after the conversion of new
PCM ops:
  sound/sh/sh_dac_audio.c:166:26: warning: unused variable 'runtime'
  sound/sh/sh_dac_audio.c:186:26: warning: unused variable 'runtime'
  sound/sh/sh_dac_audio.c:205:26: warning: unused variable 'runtime'

Fixes: 1cc2f8ba0b3e ("ALSA: sh: Convert to the new PCM ops")
Link: https://lore.kernel.org/r/20200104110057.13875-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock

[ Upstream commit ec97faff743b398e21f74a54c81333f3390093aa ]

The A64 PLL_CPU clock has the same instability if some factor changed
without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33,
H3.

Add the mux and pll notifiers for A64 CPU clock to workaround the
problem.

Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>