review.tizen.org Git - kernel/kernel-generic.git/log

staging: comedi: ni_pcimio: Add support for NI PXIe-6251

Paul Fulmek reports that PXIe-6251 works the same as the existing
PCIe-6251 and just needs the new PCI device ID adding to ni_pci_table[]
and a new entry adding to ni_boards[] based on the existing entry for
PCIe-6251.

The new entry has PCI device ID 0x72e8 and board name "pxie-6251".

Thanks Paul!

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: cap the ssid length

We're getting the ssid length from the scan here. Let's cap it before
doing the memcpy().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging, media, easycap: Fix mem leak in easycap_usb_probe()

If allocating 'pdata_urb' fails, the function will return -ENOMEM
without freeing the memory allocated, just a few lines above, for
'purb' and will leak that memory when 'purb' goes out of scope.

This patch resolves the leak by freeing the allocated storage with
usb_free_urb() before the return.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Fix typo in ieee80211_rx.c

Correct spelling "suppported" to "supported" in
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c

Signed-off-by: Masanari iida<standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sbe-2t3e3: logical || vs bitwise |

Bitwise OR was clearly intended here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: TODO : how to handle example code after unstaging

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: add mei user space example

this example tries to connect to amt host interface client and retrieve
versions of its sub components

When AMT is enabled an output might look like that:
Intel AMT: ENABLED
Flash: 6.1.0
Netstack: 6.1.0
AMTApps: 6.1.0
AMT: 6.1.0
Sku: 258
VendorID: 8086
Build Number: 1042
Recovery Version: 6.1.0
Recovery Build Num: 1042
Legacy Mode: False

otherwise:
Intel AMT: DISABLED

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: normalize prototypes of all read buffers

1. convert all read buffers to unsigned char and drop useless castings
2. simplify mei_read_slots implementation

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/mei: update copyright year to 2012

1. Update Copyright to 2012
2. Also fix mei.h copyright format
checkpaatch complained:
WARNING: please, no spaces at the start of a line

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ft1000: ft1000-pcmia: fix space required after that ', ' in ft1000_proc.c

This is a patch to the ft1000_proc.c that fixes up space required after
',' errors found by the checkpatch.pl tool

Signed-off-by: Kashyap Gada <gada.kashyap@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: removed #if 0'd out code

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: changed function return type to void

The function usbip_pad_iso never returns anything but 0 (success).

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: removed unused structure field

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drm/omap: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(..

The semantic patch that makes this change is available
in scripts/coccinelle/api/err_cast.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: fix pointer coding style

This will remove the following checkpatch.pl error:
ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: Márton Németh <nm127@freemail.hu>
Acked-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Use pr_err and pr_info for logs

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove CONFIG_TIDSPBRIDGE_DEBUG

Since all the asserts and DBC macros are gone, the kconfig macro
CONFIG_TIDSPBRIDGE_DEBUG is not almost used, but for printing trace messages.

Since it is almost not used, I don't see any case for keep it churning the
configuration menu.

This patch removes completely the kconfig macro CONFIG_TIDSPBRIDGE_DEBUG,
using only TIDSPBRIDGE_BACKTRACE for enabling the debug trace messages.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove dbc.h

All the macros in dbc.h are removed now so this patch removes it completely.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove DBC_ASSERT macro

This macro is only valid when CONFIG_TIDSPBRDIGE_DEBUG is enabled and it only
prints a log message, it is not a real assertion mechanism like BUG_ON() or
WARN_ON().

It is better to remove them: less code to maintain.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove DBC_ENSURE and DBC_REQUIRED

The kernel does not use a "Design by Contract" approach, and it is only
activated in the module if CONFIG_TIDSPBRDIGE_DEBUG is enabled, so they are
executed rarely. It is better to remove them: less code to maintain.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: Rename module from bridgedriver to tidspbridge

tidspbridge when built as a module is named bridgedriver.

bridgedriver is not a particularly good module name.

tidspbridge is what the source is named. That seems
a more appropriate module name too as it describes
the hardware function better.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: use the driver name string

Instead of assign it to a global variable which is not used anymore.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: clean up bridge_mmap()

The variable offset is not used but in the debug log, so I don't see reason to
calculate it here.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove trivial assert

The function dsp_deinit() always return true, so assert its output is
pointless. As consequence the variable were the returned value is stored, is
no longer needed.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove header inclusions

drv_interface.c include several header files that are not really used.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: silence the compiler

When compiling this report is raised by the compiler:

CC [M] drivers/staging/tidspbridge/rmgr/drv_interface.o
drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'bridge_mmap':
drivers/staging/tidspbridge/rmgr/drv_interface.c:275:2: warning: format '%lx' expects type 'long unsigned int', but argument 9 has type 'pgprot_t'

This patch fixes that warning message.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: Lindent to drv_interface.c

No functional changes.

According to Lindent, the file drv_internface.c had some lines with bad
indentation.

This commit is the output of Lindent.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: remove unused header

No functional changes.

The header file drv_interface.h was only used locally, hence there's no need
to have it.

Also the only prototyped functions were the file_operations callbacks, then
this commit moves them up to avoid prototyping too.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: more readable code

Uppercase function names are not pretty. Also the code flow readability is
enhanced.

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: checkpatch cleanup printk() -> pr_lvl()

Rewrote code to use pr_lvl() instead of printk(). There are still a few
instances of printk(), mainly in the debug code which looks like it's going to
be dropped/rewrote (most of it is blocked out).

Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: checkpatch cleanup __func__

Replaced an instance of __FUNCTION__ with __func__ in XGI_main_26.c.

Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: checkpatch cleanup braces

Cleaned up XGI_main_26.c and removed some unneeded braces to keep with code
conventions.

Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: pr_fmt kbuild macro

Added the kbuild macro pr_fmt() to XGI_main_26.c

Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: Remove remaining duplicate structs and defines

This patch removes the now unused structs and defines which were mere
duplicates of the ones in the sgi headers

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: Use structs and defines from the sis headers

This patch removes the usage of some xgi structs and defines and
replaces them with the _identical_ structs from the sis headers.
Thus the old structs and defines can be removed.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: Include sis headers

This patch includes the headers of the sis driver and reorders some
includes.

Since the xgi driver used to redefine a lot of stuff from the sis
driver, we can simply include the headers of the sis driver itself, so
we can remove duplicated stuff later on.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/xgifb: Remove unsupported mode LCD_320x480

This patch removes the probed mode LCD_320x480 which isn't supported
anyway since this mode falls through to the default (=invalid) mode in
the
XGIfb_validate_mode function (see line 529 ff. for details. the
commented out code for this mode is also removed).

By removing this assignment, we can use the LCD_TYPEs from the sis
driver without modifications.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging, vt6656/wpactl.c: Fix mem leak in wpa_ioctl()

If we hit the default case in the switch statement in wpa_ioctl()
we'll leak the memory allocated to 'param' when the variable goes out
of scope without having been assigned to anything.

This patch fixes the leak by kfree()'ing the memory before we return
from the function.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging, vt6656/wpactl.c: A basic style cleanup

This patch cleans up the coding style in
drivers/staging/vt6656/wpactl.c to closer match the generally accepted
kernel CodingStyle. It is by no means a "make it perfect" patch, but
it does get the file a fair bit closer to matching the accepted style
(whomever was involved in the evolution of this file seriously need to
configure their editors to maintain a consistent style - it was a
mess).

Besides pure style cleanups I also took the liberty of removing some
pointless parens, some unneeded casts and removing some commented out code
(it was obviously not used and git has it if it's ever needed in the
future).

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: Fix brace coding style issues in ioctl.c

This patch fixes up unnecessary brace warnings found in ioctl.c
by checkpatch.pl .

Signed-off-by: Mahendra Singh Meena <mahendra.devel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: iwctl.c: Rewrite siwrts funciton

This function has the following issues:
Parameter info and extra are not used
Wrong error handling(the function not return -EINVAL when it
happens)

This patch simplifies this funtion, remove the not used parameters and
fix the error handilng.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: iwctl.c: Remove return statement of iwctl_giwrate

This function will always return 0, and this data is not used by who
calls this function.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: iwctl.c: Remove return statement of iwctl_giwessid

This function will always return 0, and this data is not used by who
calls this function.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove return statement of iwctl_giwrange

The function iwctl_giwrange will always return 0, and this data is not
used by who calls this function.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove return statement of iwctl_giwmode

This function will always return 0, and this data is not used by who
calls this function.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: iwctl.c: Remove useless function

The funciton iwctl_commit does nothing, and can be removed.

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: iwctl.c: Remove commented code

Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vme: code convention fix

Fixed a code convention violation in vme.h

Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: separate handling of buffer allocation and stream startup

There are several features of the Line6 USB driver which require PCM
data to be exchanged with the device:
*) PCM playback and capture via ALSA
*) software monitoring (for devices without hardware monitoring)
*) optional impulse response measurement
However, from the device's point of view, there is just a single
capture and playback stream, which must be shared between these
subsystems. It is therefore necessary to maintain the state of the
subsystems with respect to PCM usage. We define several constants of
the form LINE6_BIT_PCM_<subsystem>_<direction>_<resource> with the
following meanings:
*) <subsystem> is one of
-) ALSA: PCM playback and capture via ALSA
-) MONITOR: software monitoring
-) IMPULSE: optional impulse response measurement
*) <direction> is one of
-) PLAYBACK: audio output (from host to device)
-) CAPTURE: audio input (from device to host)
*) <resource> is one of
-) BUFFER: buffer required by PCM data stream
-) STREAM: actual PCM data stream

The subsystems call line6_pcm_acquire() to acquire the (shared)
resources needed for a particular operation (e.g., allocate the buffer
for ALSA playback or start the capture stream for software monitoring).
When a resource is no longer needed, it is released by calling
line6_pcm_release(). Buffer allocation and stream startup are handled
separately to allow the ALSA kernel driver to perform them at
appropriate places (since the callback which starts a PCM stream is not
allowed to sleep).

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: use source select control for UX2 devices

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: line6: removed obsolete code

Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: precedence bug in crystalhd_stop_tx_dma_engine()

The intent here is to see if we have cleared the DMA_START_BIT flag. We
clear it a couple lines later. The current code has a precedence bug so
it is equivalent to "if (!dma_cntrl) { ...".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging: adjust double test

Rewrite a duplicated test to test the correct value

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E;
@@

(
* E
|| ... || E
|
* E
&& ... && E
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8712u: Simplify semaphores

I am preparing to convert this driver from semaphore to mutex locking,
The first step has been to eliminate a number of semaphores that were
initialized but never used, and one whose only use was a single "up"
after initialization. A total of 9 semaphores were removed in this process.

One other change was to remove some inline semaphore routines that were
unused.

In addition, several cases had the following structure:

down()
if () {
...
}
up()

The locking overhead was reduced by moving the up/down inside the if
block.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fix the build breakage cuased by telephony drivers

Fix build error caused by commit:

6222d7a17745f6e48fddda7245e4bb0d58bfeaf0
telephony: Move to staging

The telephony driver was moved to staging but the Makefiles
weren't updated

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Use memdup_user rather than duplicating its implementation

This is a little bit restricted to reduce false positives

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup_user.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Alter name, datatype, and default value of iterator variables.

This patch renames variables used in iteration
statements with i, changes the datatype to int,
and removes any default value.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Replace variables and function outputs defined as INT with int.

This patch replaces all variables and function output
that have a datatype definition of "INT" with "int".

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Remove assignment from if statement and reverse if logic for readability.

This patch removes an assignment from an if statement,
and it reverses the logic in several if statements to
make them more readable and understandable.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Remove typedef from CmHost.c and use enum.

This patch removes a typedef from a variable definition
in CmHost.c, and uses a enum instead. This Warning
was reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Replace dated variable __FUNCTION__.

This patch replaces the obsolete variable, __FUNCTION__,
that holds the name of the current function with
variable, __func__. Reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fix coding style issues in CmHost.c

This patch cleans up several code style issues found
in CmHost.c reported by checkpatch.pl. These include:
white space, braces, indents, and comments.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fix an integer overflow in IOCTL_BCM_NVM_READ/WRITE

Variables stNVMReadWrite.uioffset and stNVMReadWrite.uiNumBytes
are chosen from userspace and can be very high. The sum of
these two digits would result in a small number. Therefore,
this patch verifies a negative number was not entered, and
reorganizes the equation to remove the integer overflow.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Rename quickstart_btn to quickstart_button

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Use %u for printing button id

Button id is of unsigned int type.

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Use list.h API for buttons list

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Get rid of quickstart_data struct

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Remove unused defines

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Use switch-case in quickstart_acpi_notify

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Cleanup quickstart_acpi_config

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Cleanup quickstart_acpi_add

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Cleanup quickstart_acpi_remove

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Cleanup quickstart_acpi_ghid

Also fix memory leak (buffer.pointer) when returned buffer of length
less than 8.

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Make quickstart_input static

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Move some code to avoid forward declarations

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Prefix remaining functions names with quickstart_

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: quickstart: Some style, whitespaces and typos fixes

Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: remove xvmalloc

Removes the xvmalloc allocator code from the zram driver

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: replace xvmalloc with zsmalloc

Replaces xvmalloc with zsmalloc as the compressed page allocator
for zram

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: add zsmalloc to Kconfig/Makefile

Adds the new zsmalloc library to the staging Kconfig and Makefile

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: zsmalloc memory allocation library

This patch creates a new memory allocation library named
zsmalloc.

NOTE: zsmalloc currently depends on SPARSEMEM for the MAX_PHYSMEM_BITS
value needed to determine the format of the object handle. There may
be a better way to do this. Feedback is welcome.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zcache: crypto API support

This patch allow zcache to use the crypto API for page compression.
It replaces the direct LZO compress/decompress calls with calls
into the crypto compression API. The compressor to be used is
specified in the kernel boot line with the zcache parameter like:
zcache=lzo or zcache=deflate. If the specified compressor can't
be loaded, zcache uses lzo as the default compressor.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Consolidate all the wire protocol definitions

Consolidate all definitions that support communication with the host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Consolidate the request structure

Consolidate the request structure by getting rid of struct hv_storvsc_request.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Get rid of some unused defines

Get rid of some unused defines.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Cleanup some protocol related constants

Cleanup some protocol related constants.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Cleanup the code for generating protocol version

Cleanup the code for generating protocol version.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Miscellaneous cleanup of storvsc driver

Miscellaneous cleanup of storvsc driver - get rid of unnecessary defines and
use fixed size types for structures used for communication with the host.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Rename the context field in hv_storvsc_request

Rename the context field in hv_storvsc_request. As part of this change
fix the type of this field.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Get rid of the on_io_completion in hv_storvsc_request

Get rid of the on_io_completion field in struct hv_storvsc_request. As part of this
relocate the bounce buffer handling code (to avoid having forward declarations).

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Add a comment to explain life-cycle management

Add a comment to explain life-cycle management and fix format issue.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Move and cleanup storvsc_remove()

Relocate the storvsc_remove() function to a different location in the file
and invoke scsi_host_put() only after all the cleanup.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Cleanup storvsc_host_reset_handler()

Cleanup storvsc_host_reset_handler() by getting rid of storvsc_host_reset().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Introduce defines for srb status codes

Introduce defines for srb status codes.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Cleanup storvsc_queuecommand()

Cleanup storvsc_queuecommand(). As part of this cleanup, rename the function to
check if the scsi command can be sent to the host, consolidate error recovery
and get rid of some dead code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Cleanup storvsc_probe()

Cleanup storvsc_probe(). As part of this cleanup, get rid of
storvsc_get_ide_info() by inlining the necessary code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: hv: storvsc: Cleanup some comments

Use consistent format for comments and get rid of some unnecessary
comments.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ramster: enable as staging driver

Enable build of ramster as a staging driver

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ramster: ramster-specific new files

New files for ramster support:  The file ramster.h declares externs
and some pampd bitfield manipulation.  The file zcache.h declares
some zcache functions that now must be accessed from the ramster
glue code.  The file ramster_o2net.c is the glue between
zcache and the o2net messaging code, providing routines called
from zcache that initiate messages, and routines that handle
messages by calling zcache. TODO explains future plans for merging.

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>