wenxu [Sat, 4 Jul 2020 07:42:47 +0000 (15:42 +0800)]
net/sched: act_ct: add miss tcf_lastuse_update.
When tcf_ct_act execute the tcf_lastuse_update should
be update or the used stats never update
filter protocol ip pref 3 flower chain 0
filter protocol ip pref 3 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 1.1.1.1
ip_flags frag/firstfrag
skip_hw
not_in_hw
action order 1: ct zone 1 nat pipe
index 1 ref 1 bind 1 installed 103 sec used 103 sec
Action statistics:
Sent 151500 bytes 101 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie
4519c04dc64a1a295787aab13b6a50fb
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Andrzej Siewior [Fri, 3 Jul 2020 16:44:32 +0000 (18:44 +0200)]
net/mlx5e: Do not include rwlock.h directly
rwlock.h should not be included directly. Instead linux/splinlock.h
should be included. Including it directly will break the RT build.
Fixes:
549c243e4e010 ("net/mlx5e: Extract neigh-specific code from en_rep.c to rep/neigh.c")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 3 Jul 2020 16:06:04 +0000 (18:06 +0200)]
mptcp: fix DSS map generation on fin retransmission
The RFC 8684 mandates that no-data DATA FIN packets should carry
a DSS with 0 sequence number and data len equal to 1. Currently,
on FIN retransmission we re-use the existing mapping; if the previous
fin transmission was part of a partially acked data packet, we could
end-up writing in the egress packet a non-compliant DSS.
The above will be detected by a "Bad mapping" warning on the receiver
side.
This change addresses the issue explicitly checking for 0 len packet
when adding the DATA_FIN option.
Fixes:
6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Reported-by: syzbot+42a07faa5923cfaeb9c9@syzkaller.appspotmail.com
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Fri, 3 Jul 2020 15:00:32 +0000 (17:00 +0200)]
ipv4: fill fl4_icmp_{type,code} in ping_v4_sendmsg
IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to
incomplete IPsec ACQUIRE messages being sent to userspace. Currently,
both raw sockets and IPv6 ping sockets set those fields.
Expected output of "ip xfrm monitor":
acquire proto esp
sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4
policy src 10.0.2.15/32 dst 8.8.8.8/32
<snip>
Currently with ping sockets:
acquire proto esp
sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4
policy src 10.0.2.15/32 dst 8.8.8.8/32
<snip>
The Libreswan test suite found this problem after Fedora changed the
value for the sysctl net.ipv4.ping_group_range.
Fixes:
c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Paul Wouters <pwouters@redhat.com>
Tested-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz [Fri, 3 Jul 2020 14:10:58 +0000 (16:10 +0200)]
net: ethernet: fec: prevent tx starvation under high rx load
In the ISR, we poll the event register for the queues in need of
service and then enter polled mode. After this point, the event
register will never be read again until we exit polled mode.
In a scenario where a UDP flow is routed back out through the same
interface, i.e. "router-on-a-stick" we'll typically only see an rx
queue event initially. Once we start to process the incoming flow
we'll be locked polled mode, but we'll never clean the tx rings since
that event is never caught.
Eventually the netdev watchdog will trip, causing all buffers to be
dropped and then the process starts over again.
Rework the NAPI poll to keep trying to consome the entire budget as
long as new events are coming in, making sure to service all rx/tx
queues, in priority order, on each pass.
Fixes:
4d494cdc92b3 ("net: fec: change data structure to support multiqueue")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Rix [Fri, 3 Jul 2020 13:33:59 +0000 (06:33 -0700)]
net: sky2: initialize return of gm_phy_read
clang static analysis flags this garbage return
drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
return v;
^~~~~~~~
static inline u16 gm_phy_read( ...
{
u16 v;
__gm_phy_read(hw, port, reg, &v);
return v;
}
__gm_phy_read can return without setting v.
So handle similar to skge.c's gm_phy_read, initialize v.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Thu, 2 Jul 2020 18:52:56 +0000 (11:52 -0700)]
cgroup: fix cgroup_sk_alloc() for sk_clone_lock()
When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.
sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.
The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.
This bug seems to be introduced since the beginning, commit
d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit
090e28b229af
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.
Fixes:
bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Cameron Berkenpas <cam@neo-zeon.de>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reported-by: Daniël Sonck <dsonck92@gmail.com>
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Tested-by: Cameron Berkenpas <cam@neo-zeon.de>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 7 Jul 2020 13:39:24 +0000 (07:39 -0600)]
ipv6: Fix use of anycast address with loopback
Thomas reported a regression with IPv6 and anycast using the following
reproducer:
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
ip -6 a add fc12::1/16 dev lo
sleep 2
echo "pinging lo"
ping6 -c 2 fc12::
The conversion of addrconf_f6i_alloc to use ip6_route_info_create missed
the use of fib6_is_reject which checks addresses added to the loopback
interface and sets the REJECT flag as needed. Update fib6_is_reject for
loopback checks to handle RTF_ANYCAST addresses.
Fixes:
c7a1ce397ada ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create")
Reported-by: thomas.gambier@nexedi.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
AceLan Kao [Tue, 7 Jul 2020 08:14:45 +0000 (16:14 +0800)]
net: usb: qmi_wwan: add support for Quectel EG95 LTE modem
Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0195 Rev=03.18
S: Manufacturer=Android
S: Product=Android
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 7 Jul 2020 19:43:18 +0000 (12:43 -0700)]
Merge branch 'net-ipa-fix-warning-reported-errors'
Alex Elder says:
====================
net: ipa: fix warning-reported errors
Building the kernel with W=1 produces numerous warnings for the IPA
code. Some of those warnings turn out to flag real problems, and
this series fixes them. The first patch fixes the most important
ones, but the second and third are problems I think are worth
treating as bugs as well.
Note: I'll happily combine any of these if someone prefers that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 6 Jul 2020 23:10:10 +0000 (18:10 -0500)]
net: ipa: include declarations in "ipa_gsi.c"
Include "ipa_gsi.h" in "ipa_gsi.c", so the public functions are
defined before they are used in "ipa_gsi.c". This addresses some
warnings that are reported with a "W=1" build.
Fixes:
c3f398b141a8 ("soc: qcom: ipa: IPA interface to GSI")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 6 Jul 2020 23:10:09 +0000 (18:10 -0500)]
net: ipa: declare struct types in "ipa_gsi.h"
Pointers to two struct types are used in "ipa_gsi.h", without those
struct types being forward-declared. Add these declarations.
Fixes:
c3f398b141a8 ("soc: qcom: ipa: IPA interface to GSI")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Mon, 6 Jul 2020 23:10:08 +0000 (18:10 -0500)]
net: ipa: fix QMI structure definition bugs
Building with "W=1" did exactly what it was supposed to do, namely
point out some suspicious-looking code to be verified not to contain
bugs.
Some QMI message structures defined in "ipa_qmi_msg.c" contained
some bad field names (duplicating the "elem_size" field instead of
defining the "offset" field), almost certainly due to copy/paste
errors that weren't obvious in a scan of the code. Fix these bugs.
Fixes:
530f9216a953 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Mon, 6 Jul 2020 17:45:07 +0000 (11:45 -0600)]
ipv6: fib6_select_path can not use out path for nexthop objects
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.
More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.
Update selftests for this problem.
Fixes:
f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 6 Jul 2020 19:33:28 +0000 (12:33 -0700)]
Merge branch 'hns3-fixes'
Huazhong Tan says:
====================
net: hns3: fixes for -net
There are some fixes about reset issue and a use-after-free
of self-test.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonglong Liu [Mon, 6 Jul 2020 11:26:02 +0000 (19:26 +0800)]
net: hns3: fix use-after-free when doing self test
Enable promisc mode of PF, set VF link state to enable, and
run iperf of the VF, then do self test of the PF. The self test
will fail with a low frequency, and may cause a use-after-free
problem.
[ 87.142126] selftest:
000004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 87.159722] ==================================================================
[ 87.174187] BUG: KASAN: use-after-free in hex_dump_to_buffer+0x140/0x608
[ 87.187600] Read of size 1 at addr
ffff003b22828000 by task ethtool/1186
[ 87.201012]
[ 87.203978] CPU: 7 PID: 1186 Comm: ethtool Not tainted 5.5.0-rc4-gfd51c473-dirty #4
[ 87.219306] Hardware name: Huawei TaiShan 2280 V2/BC82AMDA, BIOS TA BIOS 2280-A CS V2.B160.01 01/15/2020
[ 87.238292] Call trace:
[ 87.243173] dump_backtrace+0x0/0x280
[ 87.250491] show_stack+0x24/0x30
[ 87.257114] dump_stack+0xe8/0x140
[ 87.263911] print_address_description.isra.8+0x70/0x380
[ 87.274538] __kasan_report+0x12c/0x230
[ 87.282203] kasan_report+0xc/0x18
[ 87.288999] __asan_load1+0x60/0x68
[ 87.295969] hex_dump_to_buffer+0x140/0x608
[ 87.304332] print_hex_dump+0x140/0x1e0
[ 87.312000] hns3_lb_check_skb_data+0x168/0x170
[ 87.321060] hns3_clean_rx_ring+0xa94/0xfe0
[ 87.329422] hns3_self_test+0x708/0x8c0
The length of packet sent by the selftest process is only
128 + 14 bytes, and the min buffer size of a BD is 256 bytes,
and the receive process will make sure the packet sent by
the selftest process is in the linear part, so only check
the linear part in hns3_lb_check_skb_data().
So fix this use-after-free by using skb_headlen() to dump
skb->data instead of skb->len.
Fixes:
c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Mon, 6 Jul 2020 11:26:01 +0000 (19:26 +0800)]
net: hns3: add a missing uninit debugfs when unload driver
When unloading driver, if flag HNS3_NIC_STATE_INITED has been
already cleared, the debugfs will not be uninitialized, so fix it.
Fixes:
b2292360bb2a ("net: hns3: Add debugfs framework registration")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Mon, 6 Jul 2020 11:26:00 +0000 (19:26 +0800)]
net: hns3: fix for mishandle of asserting VF reset fail
When asserts VF reset fail, flag HCLGEVF_STATE_CMD_DISABLE
and handshake status should not set, otherwise the retry will
fail. So adds a check for asserting VF reset and returns
directly when fails.
Fixes:
ef5f8e507ec9 ("net: hns3: stop handling command queue while resetting VF")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan [Mon, 6 Jul 2020 11:25:59 +0000 (19:25 +0800)]
net: hns3: check reset pending after FLR prepare
If there is a PF reset pending before FLR prepare, FLR's
preparatory work will not fail, but the FLR rebuild procedure
will fail for this pending. So this PF reset pending should
be handled in the FLR preparatory.
Fixes:
8627bdedc435 ("net: hns3: refactor the precedure of PF FLR")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 6 Jul 2020 19:22:24 +0000 (12:22 -0700)]
Merge branch 'smsc95xx-fix-smsc95xx_bind'
Andre Edich says:
====================
smsc95xx: fix smsc95xx_bind
The patchset fixes two problems in the function smsc95xx_bind:
- return of false success
- memory leak
Changes in v2:
- added "Fixes" tags to both patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andre Edich [Mon, 6 Jul 2020 08:39:35 +0000 (10:39 +0200)]
smsc95xx: avoid memory leak in smsc95xx_bind
In a case where the ID_REV register read is failed, the memory for a
private data structure has to be freed before returning error from the
function smsc95xx_bind.
Fixes:
bbd9f9ee69242 ("smsc95xx: add wol support for more frame types")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andre Edich [Mon, 6 Jul 2020 08:39:34 +0000 (10:39 +0200)]
smsc95xx: check return value of smsc95xx_reset
The return value of the function smsc95xx_reset() must be checked
to avoid returning false success from the function smsc95xx_bind().
Fixes:
2f7ca802bdae2 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Mon, 6 Jul 2020 00:45:21 +0000 (17:45 -0700)]
drivers/net/wan/lapbether: Fixed the value of hard_header_len
When this driver transmits data,
first this driver will remove a pseudo header of 1 byte,
then the lapb module will prepend the LAPB header of 2 or 3 bytes,
then this driver will prepend a length field of 2 bytes,
then the underlying Ethernet device will prepend its own header.
So, the header length required should be:
-1 + 3 + 2 + "the header length needed by the underlying device".
This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Jul 2020 01:04:56 +0000 (18:04 -0700)]
Merge branch 'net-rmnet-fix-interface-leak-for-rmnet-module'
Taehee Yoo says:
====================
net: rmnet: fix interface leak for rmnet module
There are two problems in rmnet module that they occur the leak of
a lower interface.
The symptom is the same, which is the leak of a lower interface.
But there are two different real problems.
This patchset is to fix these real problems.
1. Do not allow to have different two modes.
As a lower interface of rmnet, there are two modes that they are VND
and BRIDGE.
One interface can have only one mode.
But in the current rmnet, there is no code to prevent to have
two modes in one lower interface.
So, interface leak occurs.
2. Do not allow to add multiple bridge interfaces.
rmnet can have only two bridge interface.
If an additional bridge interface is tried to be attached,
rmnet should deny it.
But there is no code to do that.
So, interface leak occurs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Thu, 2 Jul 2020 17:08:55 +0000 (17:08 +0000)]
net: rmnet: do not allow to add multiple bridge interfaces
rmnet can have only two bridge interface.
One of them is a link interface and another one is added by
the master operation.
rmnet interface shouldn't allow adding additional
bridge interfaces by mater operation.
But, there is no code to deny additional interfaces.
So, interface leak occurs.
Test commands:
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add rmnet0 link dummy0 type rmnet mux_id 1
ip link set dummy1 master rmnet0
ip link set dummy2 master rmnet0
ip link del rmnet0
In the above test command, the dummy0 was attached to rmnet as VND mode.
Then, dummy1 was attached to rmnet0 as BRIDGE mode.
At this point, dummy0 mode is switched from VND to BRIDGE automatically.
Then, dummy2 is attached to rmnet as BRIDGE mode.
At this point, rmnet0 should deny this operation.
But, rmnet0 doesn't deny this.
So that below splat occurs when the rmnet0 interface is deleted.
Splat looks like:
[ 186.684787][ C2] WARNING: CPU: 2 PID: 1009 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[ 186.684788][ C2] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_x
[ 186.684805][ C2] CPU: 2 PID: 1009 Comm: ip Not tainted 5.8.0-rc1+ #621
[ 186.684807][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 186.684808][ C2] RIP: 0010:rollback_registered_many+0x986/0xcf0
[ 186.684811][ C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5
[ 186.684812][ C2] RSP: 0018:
ffff8880cd9472e0 EFLAGS:
00010287
[ 186.684815][ C2] RAX:
ffff8880cc56da58 RBX:
ffff8880ab21c000 RCX:
ffffffff9329d323
[ 186.684816][ C2] RDX:
1ffffffff2be6410 RSI:
0000000000000008 RDI:
ffffffff95f32080
[ 186.684818][ C2] RBP:
dffffc0000000000 R08:
fffffbfff2be6411 R09:
fffffbfff2be6411
[ 186.684819][ C2] R10:
ffffffff95f32087 R11:
0000000000000001 R12:
ffff8880cd947480
[ 186.684820][ C2] R13:
ffff8880ab21c0b8 R14:
ffff8880cd947400 R15:
ffff8880cdf10640
[ 186.684822][ C2] FS:
00007f00843890c0(0000) GS:
ffff8880d4e00000(0000) knlGS:
0000000000000000
[ 186.684823][ C2] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 186.684825][ C2] CR2:
000055b8ab1077b8 CR3:
00000000ab612006 CR4:
00000000000606e0
[ 186.684826][ C2] Call Trace:
[ 186.684827][ C2] ? lockdep_hardirqs_on_prepare+0x379/0x540
[ 186.684829][ C2] ? netif_set_real_num_tx_queues+0x780/0x780
[ 186.684830][ C2] ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[ 186.684831][ C2] ? __kasan_slab_free+0x126/0x150
[ 186.684832][ C2] ? kfree+0xdc/0x320
[ 186.684834][ C2] ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[ 186.684835][ C2] unregister_netdevice_many.part.135+0x13/0x1b0
[ 186.684836][ C2] rtnl_delete_link+0xbc/0x100
[ ... ]
[ 238.440071][ T1009] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1
Fixes:
037f9cdf72fb ("net: rmnet: use upper/lower device infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Thu, 2 Jul 2020 17:08:18 +0000 (17:08 +0000)]
net: rmnet: fix lower interface leak
There are two types of the lower interface of rmnet that are VND
and BRIDGE.
Each lower interface can have only one type either VND or BRIDGE.
But, there is a case, which uses both lower interface types.
Due to this unexpected behavior, lower interface leak occurs.
Test commands:
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add rmnet0 link dummy0 type rmnet mux_id 1
ip link set dummy1 master rmnet0
ip link add rmnet1 link dummy1 type rmnet mux_id 2
ip link del rmnet0
The dummy1 was attached as BRIDGE interface of rmnet0.
Then, it also was attached as VND interface of rmnet1.
This is unexpected behavior and there is no code for handling this case.
So that below splat occurs when the rmnet0 interface is deleted.
Splat looks like:
[ 53.254112][ C1] WARNING: CPU: 1 PID: 1192 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[ 53.254117][ C1] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nfx
[ 53.254182][ C1] CPU: 1 PID: 1192 Comm: ip Not tainted 5.8.0-rc1+ #620
[ 53.254188][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 53.254192][ C1] RIP: 0010:rollback_registered_many+0x986/0xcf0
[ 53.254200][ C1] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 0f 0b e5
[ 53.254205][ C1] RSP: 0018:
ffff888050a5f2e0 EFLAGS:
00010287
[ 53.254214][ C1] RAX:
ffff88805756d658 RBX:
ffff88804d99c000 RCX:
ffffffff8329d323
[ 53.254219][ C1] RDX:
1ffffffff0be6410 RSI:
0000000000000008 RDI:
ffffffff85f32080
[ 53.254223][ C1] RBP:
dffffc0000000000 R08:
fffffbfff0be6411 R09:
fffffbfff0be6411
[ 53.254228][ C1] R10:
ffffffff85f32087 R11:
0000000000000001 R12:
ffff888050a5f480
[ 53.254233][ C1] R13:
ffff88804d99c0b8 R14:
ffff888050a5f400 R15:
ffff8880548ebe40
[ 53.254238][ C1] FS:
00007f6b86b370c0(0000) GS:
ffff88806c200000(0000) knlGS:
0000000000000000
[ 53.254243][ C1] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 53.254248][ C1] CR2:
0000562c62438758 CR3:
000000003f600005 CR4:
00000000000606e0
[ 53.254253][ C1] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 53.254257][ C1] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 53.254261][ C1] Call Trace:
[ 53.254266][ C1] ? lockdep_hardirqs_on_prepare+0x379/0x540
[ 53.254270][ C1] ? netif_set_real_num_tx_queues+0x780/0x780
[ 53.254275][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[ 53.254279][ C1] ? __kasan_slab_free+0x126/0x150
[ 53.254283][ C1] ? kfree+0xdc/0x320
[ 53.254288][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[ 53.254293][ C1] unregister_netdevice_many.part.135+0x13/0x1b0
[ 53.254297][ C1] rtnl_delete_link+0xbc/0x100
[ 53.254301][ C1] ? rtnl_af_register+0xc0/0xc0
[ 53.254305][ C1] rtnl_dellink+0x2dc/0x840
[ 53.254309][ C1] ? find_held_lock+0x39/0x1d0
[ 53.254314][ C1] ? valid_fdb_dump_strict+0x620/0x620
[ 53.254318][ C1] ? rtnetlink_rcv_msg+0x457/0x890
[ 53.254322][ C1] ? lock_contended+0xd20/0xd20
[ 53.254326][ C1] rtnetlink_rcv_msg+0x4a8/0x890
[ ... ]
[ 73.813696][ T1192] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1
Fixes:
037f9cdf72fb ("net: rmnet: use upper/lower device infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Thu, 2 Jul 2020 17:06:19 +0000 (17:06 +0000)]
hsr: fix interface leak in error path of hsr_dev_finalize()
To release hsr(upper) interface, it should release
its own lower interfaces first.
Then, hsr(upper) interface can be released safely.
In the current code of error path of hsr_dev_finalize(), it releases hsr
interface before releasing a lower interface.
So, a warning occurs, which warns about the leak of lower interfaces.
In order to fix this problem, changing the ordering of the error path of
hsr_dev_finalize() is needed.
Test commands:
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1
ip link add hsr1 type hsr slave1 dummy2 slave2 dummy0
Splat looks like:
[ 214.923127][ C2] WARNING: CPU: 2 PID: 1093 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[ 214.923129][ C2] Modules linked in: hsr dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipx
[ 214.923154][ C2] CPU: 2 PID: 1093 Comm: ip Not tainted 5.8.0-rc2+ #623
[ 214.923156][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 214.923157][ C2] RIP: 0010:rollback_registered_many+0x986/0xcf0
[ 214.923160][ C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5
[ 214.923162][ C2] RSP: 0018:
ffff8880c5156f28 EFLAGS:
00010287
[ 214.923165][ C2] RAX:
ffff8880d1dad458 RBX:
ffff8880bd1b9000 RCX:
ffffffffb929d243
[ 214.923167][ C2] RDX:
1ffffffff77e63f0 RSI:
0000000000000008 RDI:
ffffffffbbf31f80
[ 214.923168][ C2] RBP:
dffffc0000000000 R08:
fffffbfff77e63f1 R09:
fffffbfff77e63f1
[ 214.923170][ C2] R10:
ffffffffbbf31f87 R11:
0000000000000001 R12:
ffff8880c51570a0
[ 214.923172][ C2] R13:
ffff8880bd1b90b8 R14:
ffff8880c5157048 R15:
ffff8880d1dacc40
[ 214.923174][ C2] FS:
00007fdd257a20c0(0000) GS:
ffff8880da200000(0000) knlGS:
0000000000000000
[ 214.923175][ C2] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 214.923177][ C2] CR2:
00007ffd78beb038 CR3:
00000000be544005 CR4:
00000000000606e0
[ 214.923179][ C2] Call Trace:
[ 214.923180][ C2] ? netif_set_real_num_tx_queues+0x780/0x780
[ 214.923182][ C2] ? dev_validate_mtu+0x140/0x140
[ 214.923183][ C2] ? synchronize_rcu.part.79+0x85/0xd0
[ 214.923185][ C2] ? synchronize_rcu_expedited+0xbb0/0xbb0
[ 214.923187][ C2] rollback_registered+0xc8/0x170
[ 214.923188][ C2] ? rollback_registered_many+0xcf0/0xcf0
[ 214.923190][ C2] unregister_netdevice_queue+0x18b/0x240
[ 214.923191][ C2] hsr_dev_finalize+0x56e/0x6e0 [hsr]
[ 214.923192][ C2] hsr_newlink+0x36b/0x450 [hsr]
[ 214.923194][ C2] ? hsr_dellink+0x70/0x70 [hsr]
[ 214.923195][ C2] ? rtnl_create_link+0x2e4/0xb00
[ 214.923197][ C2] ? __netlink_ns_capable+0xc3/0xf0
[ 214.923198][ C2] __rtnl_newlink+0xbdb/0x1270
[ ... ]
Fixes:
e0a4b99773d3 ("hsr: use upper/lower device infrastructure")
Reported-by: syzbot+7f1c020f68dab95aab59@syzkaller.appspotmail.com
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo bin [Sat, 4 Jul 2020 07:32:43 +0000 (15:32 +0800)]
hinic: fix sending mailbox timeout in aeq event work
When sending mailbox in the work of aeq event, another aeq event
will be triggered. because the last aeq work is not exited and only
one work can be excuted simultaneously in the same workqueue, mailbox
sending function will return failure of timeout. We create and use
another workqueue to fix this.
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Jul 2020 00:47:35 +0000 (17:47 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use kvfree() to release vmalloc()'ed areas in ipset, from Eric Dumazet.
2) UAF in nfnetlink_queue from the nf_conntrack_update() path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Jul 2020 00:46:21 +0000 (17:46 -0700)]
Merge branch 'Documentation-networking-eliminate-doubled-words'
Randy Dunlap says:
====================
Documentation: networking: eliminate doubled words
Drop all duplicated words in Documentation/networking/ files.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 3 Jul 2020 22:41:15 +0000 (15:41 -0700)]
Documentation: networking: rxrpc: drop doubled word
Drop the doubled word "have".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 3 Jul 2020 22:41:14 +0000 (15:41 -0700)]
Documentation: networking: ipvs-sysctl: drop doubled word
Drop the doubled word "that".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 3 Jul 2020 22:41:13 +0000 (15:41 -0700)]
Documentation: networking: ip-sysctl: drop doubled word
Drop the doubled word "that".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 3 Jul 2020 22:41:12 +0000 (15:41 -0700)]
Documentation: networking: dsa: drop doubled word
Drop the doubled word "in".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 3 Jul 2020 22:41:11 +0000 (15:41 -0700)]
Documentation: networking: can_ucan_protocol: drop doubled words
Drop the doubled words "the" and "of".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 3 Jul 2020 22:41:10 +0000 (15:41 -0700)]
Documentation: networking: ax25: drop doubled word
Drop the doubled word "and".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-hams@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Fri, 3 Jul 2020 22:41:09 +0000 (15:41 -0700)]
Documentation: networking: arcnet: drop doubled word
Drop the doubled word "to".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Fri, 3 Jul 2020 20:26:43 +0000 (22:26 +0200)]
sched: consistently handle layer3 header accesses in the presence of VLANs
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.
However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).
To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.
To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.
v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
bpf_skb_ecn_set_ce()
v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
calling the helper twice
Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes:
d8b9605d2697 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 1 Jul 2020 11:17:40 +0000 (13:17 +0200)]
netfilter: conntrack: refetch conntrack after nf_conntrack_update()
__nf_conntrack_update() might refresh the conntrack object that is
attached to the skbuff. Otherwise, this triggers UAF.
[ 633.200434] ==================================================================
[ 633.200472] BUG: KASAN: use-after-free in nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[ 633.200478] Read of size 1 at addr
ffff888370804c00 by task nfqnl_test/6769
[ 633.200487] CPU: 1 PID: 6769 Comm: nfqnl_test Not tainted 5.8.0-rc2+ #388
[ 633.200490] Hardware name: LENOVO 23259H1/23259H1, BIOS G2ET32WW (1.12 ) 05/30/2012
[ 633.200491] Call Trace:
[ 633.200499] dump_stack+0x7c/0xb0
[ 633.200526] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[ 633.200532] print_address_description.constprop.6+0x1a/0x200
[ 633.200539] ? _raw_write_lock_irqsave+0xc0/0xc0
[ 633.200568] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[ 633.200594] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[ 633.200598] kasan_report.cold.9+0x1f/0x42
[ 633.200604] ? call_rcu+0x2c0/0x390
[ 633.200633] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[ 633.200659] nf_conntrack_update+0x34e/0x770 [nf_conntrack]
[ 633.200687] ? nf_conntrack_find_get+0x30/0x30 [nf_conntrack]
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1436
Fixes:
ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Nicolas Ferre [Thu, 2 Jul 2020 13:00:21 +0000 (15:00 +0200)]
MAINTAINERS: net: macb: add Claudiu as co-maintainer
I would like that Claudiu becomes co-maintainer of the Cadence macb
driver. He's already participating to lots of reviews and enhancements
to this driver and knows the different versions of this controller.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Codrin Ciubotariu [Thu, 2 Jul 2020 09:44:50 +0000 (12:44 +0300)]
net: dsa: microchip: set the correct number of ports
The number of ports is incorrectly set to the maximum available for a DSA
switch. Even if the extra ports are not used, this causes some functions
to be called later, like port_disable() and port_stp_state_set(). If the
driver doesn't check the port index, it will end up modifying unknown
registers.
Fixes:
b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 2 Jul 2020 01:39:33 +0000 (18:39 -0700)]
tcp: md5: allow changing MD5 keys in all socket states
This essentially reverts commit
721230326891 ("tcp: md5: reject TCP_MD5SIG
or TCP_MD5SIG_EXT on established sockets")
Mathieu reported that many vendors BGP implementations can
actually switch TCP MD5 on established flows.
Quoting Mathieu :
Here is a list of a few network vendors along with their behavior
with respect to TCP MD5:
- Cisco: Allows for password to be changed, but within the hold-down
timer (~180 seconds).
- Juniper: When password is initially set on active connection it will
reset, but after that any subsequent password changes no network
resets.
- Nokia: No notes on if they flap the tcp connection or not.
- Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until
both sides are ok with new passwords.
- Meta-Switch: Expects the password to be set before a connection is
attempted, but no further info on whether they reset the TCP
connection on a change.
- Avaya: Disable the neighbor, then set password, then re-enable.
- Zebos: Would normally allow the change when socket connected.
We can revert my prior change because commit
9424e2e7ad93 ("tcp: md5: fix potential
overestimation of TCP option space") removed the leak of 4 kernel bytes to
the wire that was the main reason for my patch.
While doing my investigations, I found a bug when a MD5 key is changed, leading
to these commits that stable teams want to consider before backporting this revert :
Commit
6a2febec338d ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
Commit
e6ced831ef11 ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers")
Fixes:
721230326891 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Helmut Grohne [Wed, 1 Jul 2020 11:22:20 +0000 (13:22 +0200)]
net: dsa: microchip: enable ksz9893 via i2c in the ksz9477 driver
The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI,
I²C or MDIO (very limited and not supported by this driver). While there
is already a compatible entry for the SPI bus, it was missing for I²C.
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 30 Jun 2020 20:51:28 +0000 (13:51 -0700)]
tcp: fix SO_RCVLOWAT possible hangs under high mem pressure
Whenever tcp_try_rmem_schedule() returns an error, we are under
trouble and should make sure to wakeup readers so that they
can drain socket queues and eventually make room.
Fixes:
03f45c883c6f ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 1 Jul 2020 20:00:06 +0000 (16:00 -0400)]
ip: Fix SO_MARK in RST, ACK and ICMP packets
When no full socket is available, skbs are sent over a per-netns
control socket. Its sk_mark is temporarily adjusted to match that
of the real (request or timewait) socket or to reflect an incoming
skb, so that the outgoing skb inherits this in __ip_make_skb.
Introduction of the socket cookie mark field broke this. Now the
skb is set through the cookie and cork:
<caller> # init sockc.mark from sk_mark or cmsg
ip_append_data
ip_setup_cork # convert sockc.mark to cork mark
ip_push_pending_frames
ip_finish_skb
__ip_make_skb # set skb->mark to cork mark
But I missed these special control sockets. Update all callers of
__ip(6)_make_skb that were originally missed.
For IPv6, the same two icmp(v6) paths are affected. The third
case is not, as commit
92e55f412cff ("tcp: don't annotate
mark on control socket from tcp_v6_send_response()") replaced
the ctl_sk->sk_mark with passing the mark field directly as a
function argument. That commit predates the commit that
introduced the bug.
Fixes:
c6af0c227a22 ("ip: support SO_MARK cmsg")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reported-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 1 Jul 2020 19:41:23 +0000 (12:41 -0700)]
tcp: md5: do not send silly options in SYNCOOKIES
Whenever cookie_init_timestamp() has been used to encode
ECN,SACK,WSCALE options, we can not remove the TS option in the SYNACK.
Otherwise, tcp_synack_options() will still advertize options like WSCALE
that we can not deduce later when receiving the packet from the client
to complete 3WHS.
Note that modern linux TCP stacks wont use MD5+TS+SACK in a SYN packet,
but we can not know for sure that all TCP stacks have the same logic.
Before the fix a tcpdump would exhibit this wrong exchange :
10:12:15.464591 IP C > S: Flags [S], seq
4202415601, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val
456965269 ecr 0,nop,wscale 8], length 0
10:12:15.464602 IP S > C: Flags [S.], seq
253516766, ack
4202415602, win 65535, options [nop,nop,md5 valid,mss 1400,nop,nop,sackOK,nop,wscale 8], length 0
10:12:15.464611 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid], length 0
10:12:15.464678 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid], length 12
10:12:15.464685 IP S > C: Flags [.], ack 13, win 65535, options [nop,nop,md5 valid], length 0
After this patch the exchange looks saner :
11:59:59.882990 IP C > S: Flags [S], seq
517075944, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val
1751508483 ecr 0,nop,wscale 8], length 0
11:59:59.883002 IP S > C: Flags [S.], seq
1902939253, ack
517075945, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val
1751508479 ecr
1751508483,nop,wscale 8], length 0
11:59:59.883012 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val
1751508483 ecr
1751508479], length 0
11:59:59.883114 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val
1751508483 ecr
1751508479], length 12
11:59:59.883122 IP S > C: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val
1751508483 ecr
1751508483], length 0
11:59:59.883152 IP S > C: Flags [P.], seq 1:13, ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val
1751508484 ecr
1751508483], length 12
11:59:59.883170 IP C > S: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val
1751508484 ecr
1751508484], length 0
Of course, no SACK block will ever be added later, but nothing should break.
Technically, we could remove the 4 nops included in MD5+TS options,
but again some stacks could break seeing not conventional alignment.
Fixes:
4957faade11b ("TCPCT part 1g: Responder Cookie => Initiator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rao Shoaib [Wed, 1 Jul 2020 19:23:38 +0000 (12:23 -0700)]
rds: If one path needs re-connection, check all and re-connect
In testing with mprds enabled, Oracle Cluster nodes after reboot were
not able to communicate with others nodes and so failed to rejoin
the cluster. Peers with lower IP address initiated connection but the
node could not respond as it choose a different path and could not
initiate a connection as it had a higher IP address.
With this patch, when a node sends out a packet and the selected path
is down, all other paths are also checked and any down paths are
re-connected.
Reviewed-by: Ka-cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 1 Jul 2020 18:43:04 +0000 (11:43 -0700)]
tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers
My prior fix went a bit too far, according to Herbert and Mathieu.
Since we accept that concurrent TCP MD5 lookups might see inconsistent
keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb()
Clearing all key->key[] is needed to avoid possible KMSAN reports,
if key->keylen is increased. Since tcp_md5_do_add() is not fast path,
using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler.
data_race() was added in linux-5.8 and will prevent KCSAN reports,
this can safely be removed in stable backports, if data_race() is
not yet backported.
v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add()
Fixes:
6a2febec338d ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Marco Elver <elver@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Tranchetti [Tue, 30 Jun 2020 17:50:17 +0000 (11:50 -0600)]
genetlink: remove genl_bind
A potential deadlock can occur during registering or unregistering a
new generic netlink family between the main nl_table_lock and the
cb_lock where each thread wants the lock held by the other, as
demonstrated below.
1) Thread 1 is performing a netlink_bind() operation on a socket. As part
of this call, it will call netlink_lock_table(), incrementing the
nl_table_users count to 1.
2) Thread 2 is registering (or unregistering) a genl_family via the
genl_(un)register_family() API. The cb_lock semaphore will be taken for
writing.
3) Thread 1 will call genl_bind() as part of the bind operation to handle
subscribing to GENL multicast groups at the request of the user. It will
attempt to take the cb_lock semaphore for reading, but it will fail and
be scheduled away, waiting for Thread 2 to finish the write.
4) Thread 2 will call netlink_table_grab() during the (un)registration
call. However, as Thread 1 has incremented nl_table_users, it will not
be able to proceed, and both threads will be stuck waiting for the
other.
genl_bind() is a noop, unless a genl_family implements the mcast_bind()
function to handle setting up family-specific multicast operations. Since
no one in-tree uses this functionality as Cong pointed out, simply removing
the genl_bind() function will remove the possibility for deadlock, as there
is no attempt by Thread 1 above to take the cb_lock semaphore.
Fixes:
c380d9a7afff ("genetlink: pass multicast bind/unbind to families")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Johannes Berg <johannes.berg@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luo bin [Wed, 1 Jul 2020 03:16:33 +0000 (11:16 +0800)]
hinic: fix passing non negative value to ERR_PTR
get_dev_cap and set_resources_state functions may return a positive
value because of hardware failure, and the positive return value
can not be passed to ERR_PTR directly.
Fixes:
7dd29ee12865 ("hinic: add sriov feature support")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 30 Jun 2020 11:46:15 +0000 (14:46 +0300)]
net: qrtr: Fix an out of bounds read qrtr_endpoint_post()
This code assumes that the user passed in enough data for a
qrtr_hdr_v1 or qrtr_hdr_v2 struct, but it's not necessarily true. If
the buffer is too small then it will read beyond the end.
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reported-by: syzbot+b8fe393f999a291a9ea6@syzkaller.appspotmail.com
Fixes:
194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 30 Jun 2020 23:41:01 +0000 (16:41 -0700)]
tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()
MD5 keys are read with RCU protection, and tcp_md5_do_add()
might update in-place a prior key.
Normally, typical RCU updates would allocate a new piece
of memory. In this case only key->key and key->keylen might
be updated, and we do not care if an incoming packet could
see the old key, the new one, or some intermediate value,
since changing the key on a live flow is known to be problematic
anyway.
We only want to make sure that in the case key->keylen
is changed, cpus in tcp_md5_hash_key() wont try to use
uninitialized data, or crash because key->keylen was
read twice to feed sg_init_one() and ahash_request_set_crypt()
Fixes:
9ea88a153001 ("tcp: md5: check md5 signature without socket lock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Carl Huang [Tue, 30 Jun 2020 06:52:51 +0000 (14:52 +0800)]
net: qrtr: free flow in __qrtr_node_release
The flow is allocated in qrtr_tx_wait, but not freed when qrtr node
is released. (*slot) becomes NULL after radix_tree_iter_delete is
called in __qrtr_node_release. The fix is to save (*slot) to a
vairable and then free it.
This memory leak is catched when kmemleak is enabled in kernel,
the report looks like below:
unreferenced object 0xffffa0de69e08420 (size 32):
comm "kworker/u16:3", pid 176, jiffies
4294918275 (age 82858.876s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 28 84 e0 69 de a0 ff ff ........(..i....
28 84 e0 69 de a0 ff ff 03 00 00 00 00 00 00 00 (..i............
backtrace:
[<
00000000e252af0a>] qrtr_node_enqueue+0x38e/0x400 [qrtr]
[<
000000009cea437f>] qrtr_sendmsg+0x1e0/0x2a0 [qrtr]
[<
000000008bddbba4>] sock_sendmsg+0x5b/0x60
[<
0000000003beb43a>] qmi_send_message.isra.3+0xbe/0x110 [qmi_helpers]
[<
000000009c9ae7de>] qmi_send_request+0x1c/0x20 [qmi_helpers]
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Heng [Mon, 29 Jun 2020 10:49:51 +0000 (18:49 +0800)]
net: cxgb4: fix return error value in t4_prep_fw
t4_prep_fw goto bye tag with positive return value when something
bad happened and which can not free resource in adap_init0.
so fix it to return negative value.
Fixes:
16e47624e76b ("cxgb4: Add new scheme to update T4/T5 firmware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Jun 2020 21:20:45 +0000 (14:20 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2020-06-30
The following pull-request contains BPF updates for your *net* tree.
We've added 28 non-merge commits during the last 9 day(s) which contain
a total of 35 files changed, 486 insertions(+), 232 deletions(-).
The main changes are:
1) Fix an incorrect verifier branch elimination for PTR_TO_BTF_ID pointer
types, from Yonghong Song.
2) Fix UAPI for sockmap and flow_dissector progs that were ignoring various
arguments passed to BPF_PROG_{ATTACH,DETACH}, from Lorenz Bauer & Jakub Sitnicki.
3) Fix broken AF_XDP DMA hacks that are poking into dma-direct and swiotlb
internals and integrate it properly into DMA core, from Christoph Hellwig.
4) Fix RCU splat from recent changes to avoid skipping ingress policy when
kTLS is enabled, from John Fastabend.
5) Fix BPF ringbuf map to enforce size to be the power of 2 in order for its
position masking to work, from Andrii Nakryiko.
6) Fix regression from CAP_BPF work to re-allow CAP_SYS_ADMIN for loading
of network programs, from Maciej Żenczykowski.
7) Fix libbpf section name prefix for devmap progs, from Jesper Dangaard Brouer.
8) Fix formatting in UAPI documentation for BPF helpers, from Quentin Monnet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yonghong Song [Tue, 30 Jun 2020 17:12:41 +0000 (10:12 -0700)]
bpf: Add tests for PTR_TO_BTF_ID vs. null comparison
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison,
one for PTR_TO_BTF_ID in the ctx structure and the
other for PTR_TO_BTF_ID after one level pointer chasing.
In both cases, the test ensures condition is not
removed.
For example, for this test
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
Before the previous verifier change, we have xlated codes:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
1: (b4) w0 = 0
2: (95) exit
After the previous verifier change, we have:
int test7(long long unsigned int * ctx):
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
0: (79) r1 = *(u64 *)(r1 +0)
; if (arg == 0)
1: (55) if r1 != 0x0 goto pc+4
; test7_result = 1;
2: (18) r1 = map[id:6][0]+48
4: (b7) r2 = 1
5: (7b) *(u64 *)(r1 +0) = r2
; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
6: (b4) w0 = 0
7: (95) exit
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630171241.2523875-1-yhs@fb.com
Yonghong Song [Tue, 30 Jun 2020 17:12:40 +0000 (10:12 -0700)]
bpf: Fix an incorrect branch elimination by verifier
Wenbo reported an issue in [1] where a checking of null
pointer is evaluated as always false. In this particular
case, the program type is tp_btf and the pointer to
compare is a PTR_TO_BTF_ID.
The current verifier considers PTR_TO_BTF_ID always
reprents a non-null pointer, hence all PTR_TO_BTF_ID compares
to 0 will be evaluated as always not-equal, which resulted
in the branch elimination.
For example,
struct bpf_fentry_test_t {
struct bpf_fentry_test_t *a;
};
int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
{
if (arg == 0)
test7_result = 1;
return 0;
}
int BPF_PROG(test8, struct bpf_fentry_test_t *arg)
{
if (arg->a == 0)
test8_result = 1;
return 0;
}
In above bpf programs, both branch arg == 0 and arg->a == 0
are removed. This may not be what developer expected.
The bug is introduced by Commit
cac616db39c2 ("bpf: Verifier
track null pointer branch_taken with JNE and JEQ"),
where PTR_TO_BTF_ID is considered to be non-null when evaluting
pointer vs. scalar comparison. This may be added
considering we have PTR_TO_BTF_ID_OR_NULL in the verifier
as well.
PTR_TO_BTF_ID_OR_NULL is added to explicitly requires
a non-NULL testing in selective cases. The current generic
pointer tracing framework in verifier always
assigns PTR_TO_BTF_ID so users does not need to
check NULL pointer at every pointer level like a->b->c->d.
We may not want to assign every PTR_TO_BTF_ID as
PTR_TO_BTF_ID_OR_NULL as this will require a null test
before pointer dereference which may cause inconvenience
for developers. But we could avoid branch elimination
to preserve original code intention.
This patch simply removed PTR_TO_BTD_ID from reg_type_not_null()
in verifier, which prevented the above branches from being eliminated.
[1]: https://lore.kernel.org/bpf/
79dbb7c0-449d-83eb-5f4f-
7af0cc269168@fb.com/T/
Fixes:
cac616db39c2 ("bpf: Verifier track null pointer branch_taken with JNE and JEQ")
Reported-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630171240.2523722-1-yhs@fb.com
David S. Miller [Tue, 30 Jun 2020 20:10:57 +0000 (13:10 -0700)]
Merge branch 'net-ipa-three-bug-fixes'
Alex Elder says:
====================
net: ipa: three bug fixes
This series contains three bug fixes for the Qualcomm IPA driver.
In practice these bugs are unlikke.y to be harmful, but they do
represent incorrect code.
Version 2 adds "Fixes" tags to two of the patches and fixes a typo
in one (found by checkpatch.pl).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 30 Jun 2020 12:44:44 +0000 (07:44 -0500)]
net: ipa: introduce ipa_cmd_tag_process()
Create a new function ipa_cmd_tag_process() that simply allocates a
transaction, adds a tag process command to it to clear the hardware
pipeline, and commits the transaction.
Call it in from ipa_endpoint_suspend(), after suspending the modem
endpoints but before suspending the AP command TX and AP LAN RX
endpoints (which are used by the tag sequence).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 30 Jun 2020 12:44:43 +0000 (07:44 -0500)]
net: ipa: no checksum offload for SDM845 LAN RX
The AP LAN RX endpoint should not have download checksum offload
enabled.
The receive handler does properly accommodate the trailer that's
added by the hardware, but we ignore it.
Fixes:
1ed7d0c0fdba ("soc: qcom: ipa: configuration data")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Tue, 30 Jun 2020 12:44:42 +0000 (07:44 -0500)]
net: ipa: always check for stopped channel
In gsi_channel_stop(), there's a check to see if the channel might
have entered STOPPED state since a previous call, which might have
timed out before stopping completed.
That check actually belongs in gsi_channel_stop_command(), which is
called repeatedly by gsi_channel_stop() for RX channels.
Fixes:
650d1603825d ("soc: qcom: ipa: the generic software interface")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Tue, 30 Jun 2020 10:04:40 +0000 (11:04 +0100)]
net: mvneta: fix use of state->speed
When support for short preambles was added, it incorrectly keyed its
decision off state->speed instead of state->interface. state->speed
is not guaranteed to be correct for in-band modes, which can lead to
short preambles being unexpectedly disabled.
Fix this by keying off the interface mode, which is the only way that
mvneta can operate at 2.5Gbps.
Fixes:
da58a931f248 ("net: mvneta: Add support for 2500Mbps SGMII")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Jun 2020 19:29:39 +0000 (12:29 -0700)]
Merge branch 'support-AF_PACKET-for-layer-3-devices'
Jason A. Donenfeld says:
====================
support AF_PACKET for layer 3 devices
Hans reported that packets injected by a correct-looking and trivial
libpcap-based program were not being accepted by wireguard. In
investigating that, I noticed that a few devices weren't properly
handling AF_PACKET-injected packets, and so this series introduces a bit
of shared infrastructure to support that.
The basic problem begins with socket(AF_PACKET, SOCK_RAW,
htons(ETH_P_ALL)) sockets. When sendto is called, AF_PACKET examines the
headers of the packet with this logic:
static void packet_parse_headers(struct sk_buff *skb, struct socket *sock)
{
if ((!skb->protocol || skb->protocol == htons(ETH_P_ALL)) &&
sock->type == SOCK_RAW) {
skb_reset_mac_header(skb);
skb->protocol = dev_parse_header_protocol(skb);
}
skb_probe_transport_header(skb);
}
The middle condition there triggers, and we jump to
dev_parse_header_protocol. Note that this is the only caller of
dev_parse_header_protocol in the kernel, and I assume it was designed
for this purpose:
static inline __be16 dev_parse_header_protocol(const struct sk_buff *skb)
{
const struct net_device *dev = skb->dev;
if (!dev->header_ops || !dev->header_ops->parse_protocol)
return 0;
return dev->header_ops->parse_protocol(skb);
}
Since AF_PACKET already knows which netdev the packet is going to, the
dev_parse_header_protocol function can see if that netdev has a way it
prefers to figure out the protocol from the header. This, again, is the
only use of parse_protocol in the kernel. At the moment, it's only used
with ethernet devices, via eth_header_parse_protocol. This makes sense,
as mostly people are used to AF_PACKET-injecting ethernet frames rather
than layer 3 frames. But with nothing in place for layer 3 netdevs, this
function winds up returning 0, and skb->protocol then is set to 0, and
then by the time it hits the netdev's ndo_start_xmit, the driver doesn't
know what to do with it.
This is a problem because drivers very much rely on skb->protocol being
correct, and routinely reject packets where it's incorrect. That's why
having this parsing happen for injected packets is quite important. In
wireguard, ipip, and ipip6, for example, packets from AF_PACKET are just
dropped entirely. For tun devices, it's sort of uglier, with the tun
"packet information" header being passed to userspace containing a bogus
protocol value. Some userspace programs are ill-equipped to deal with
that. (But of course, that doesn't happen with tap devices, which
benefit from the similar shared infrastructure for layer 2 netdevs,
further motiviating this patchset for layer 3 netdevs.)
This patchset addresses the issue by first adding a layer 3 header parse
function, much akin to the existing one for layer 2 packets, and then
adds a shared header_ops structure that, also much akin to the existing
one for layer 2 packets. Then it wires it up to a few immediate places
that stuck out as requiring it, and does a bit of cleanup.
This patchset seems like it's fixing real bugs, so it might be
appropriate for stable. But they're also very old bugs, so if you'd
rather not backport to stable, that'd make sense to me too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 30 Jun 2020 01:06:25 +0000 (19:06 -0600)]
net: xfrmi: implement header_ops->parse_protocol for AF_PACKET
The xfrm interface uses skb->protocol to determine packet type, and
bails out if it's not set. For AF_PACKET injection, we need to support
its call chain of:
packet_sendmsg -> packet_snd -> packet_parse_headers ->
dev_parse_header_protocol -> parse_protocol
Without a valid parse_protocol, this returns zero, and xfrmi rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 30 Jun 2020 01:06:24 +0000 (19:06 -0600)]
net: sit: implement header_ops->parse_protocol for AF_PACKET
Sit uses skb->protocol to determine packet type, and bails out if it's
not set. For AF_PACKET injection, we need to support its call chain of:
packet_sendmsg -> packet_snd -> packet_parse_headers ->
dev_parse_header_protocol -> parse_protocol
Without a valid parse_protocol, this returns zero, and sit rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 30 Jun 2020 01:06:23 +0000 (19:06 -0600)]
net: vti: implement header_ops->parse_protocol for AF_PACKET
Vti uses skb->protocol to determine packet type, and bails out if it's
not set. For AF_PACKET injection, we need to support its call chain of:
packet_sendmsg -> packet_snd -> packet_parse_headers ->
dev_parse_header_protocol -> parse_protocol
Without a valid parse_protocol, this returns zero, and vti rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 30 Jun 2020 01:06:22 +0000 (19:06 -0600)]
tun: implement header_ops->parse_protocol for AF_PACKET
The tun driver passes up skb->protocol to userspace in the form of PI headers.
For AF_PACKET injection, we need to support its call chain of:
packet_sendmsg -> packet_snd -> packet_parse_headers ->
dev_parse_header_protocol -> parse_protocol
Without a valid parse_protocol, this returns zero, and the tun driver
then gives userspace bogus values that it can't deal with.
Note that this isn't the case with tap, because tap already benefits
from the shared infrastructure for ethernet headers. But with tun,
there's nothing.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 30 Jun 2020 01:06:21 +0000 (19:06 -0600)]
wireguard: queueing: make use of ip_tunnel_parse_protocol
Now that wg_examine_packet_protocol has been added for general
consumption as ip_tunnel_parse_protocol, it's possible to remove
wg_examine_packet_protocol and simply use the new
ip_tunnel_parse_protocol function directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 30 Jun 2020 01:06:20 +0000 (19:06 -0600)]
wireguard: implement header_ops->parse_protocol for AF_PACKET
WireGuard uses skb->protocol to determine packet type, and bails out if
it's not set or set to something it's not expecting. For AF_PACKET
injection, we need to support its call chain of:
packet_sendmsg -> packet_snd -> packet_parse_headers ->
dev_parse_header_protocol -> parse_protocol
Without a valid parse_protocol, this returns zero, and wireguard then
rejects the skb. So, this wires up the ip_tunnel handler for layer 3
packets for that case.
Reported-by: Hans Wippel <ndev@hwipl.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 30 Jun 2020 01:06:19 +0000 (19:06 -0600)]
net: ipip: implement header_ops->parse_protocol for AF_PACKET
Ipip uses skb->protocol to determine packet type, and bails out if it's
not set. For AF_PACKET injection, we need to support its call chain of:
packet_sendmsg -> packet_snd -> packet_parse_headers ->
dev_parse_header_protocol -> parse_protocol
Without a valid parse_protocol, this returns zero, and ipip rejects the
skb. So, this wires up the ip_tunnel handler for layer 3 packets for
that case.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld [Tue, 30 Jun 2020 01:06:18 +0000 (19:06 -0600)]
net: ip_tunnel: add header_ops for layer 3 devices
Some devices that take straight up layer 3 packets benefit from having a
shared header_ops so that AF_PACKET sockets can inject packets that are
recognized. This shared infrastructure will be used by other drivers
that currently can't inject packets using AF_PACKET. It also exposes the
parser function, as it is useful in standalone form too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Sitnicki [Tue, 30 Jun 2020 16:45:41 +0000 (18:45 +0200)]
bpf, netns: Fix use-after-free in pernet pre_exit callback
Iterating over BPF links attached to network namespace in pre_exit hook is
not safe, even if there is just one. Once link gets auto-detached, that is
its back-pointer to net object is set to NULL, the link can be released and
freed without waiting on netns_bpf_mutex, effectively causing the list
element we are operating on to be freed.
This leads to use-after-free when trying to access the next element on the
list, as reported by KASAN. Bug can be triggered by destroying a network
namespace, while also releasing a link attached to this network namespace.
| ==================================================================
| BUG: KASAN: use-after-free in netns_bpf_pernet_pre_exit+0xd9/0x130
| Read of size 8 at addr
ffff888119e0d778 by task kworker/u8:2/177
|
| CPU: 3 PID: 177 Comm: kworker/u8:2 Not tainted 5.8.0-rc1-00197-ga0c04c9d1008-dirty #776
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: netns cleanup_net
| Call Trace:
| dump_stack+0x9e/0xe0
| print_address_description.constprop.0+0x3a/0x60
| ? netns_bpf_pernet_pre_exit+0xd9/0x130
| kasan_report.cold+0x1f/0x40
| ? netns_bpf_pernet_pre_exit+0xd9/0x130
| netns_bpf_pernet_pre_exit+0xd9/0x130
| cleanup_net+0x30b/0x5b0
| ? unregister_pernet_device+0x50/0x50
| ? rcu_read_lock_bh_held+0xb0/0xb0
| ? _raw_spin_unlock_irq+0x24/0x50
| process_one_work+0x4d1/0xa10
| ? lock_release+0x3e0/0x3e0
| ? pwq_dec_nr_in_flight+0x110/0x110
| ? rwlock_bug.part.0+0x60/0x60
| worker_thread+0x7a/0x5c0
| ? process_one_work+0xa10/0xa10
| kthread+0x1e3/0x240
| ? kthread_create_on_node+0xd0/0xd0
| ret_from_fork+0x1f/0x30
|
| Allocated by task 280:
| save_stack+0x1b/0x40
| __kasan_kmalloc.constprop.0+0xc2/0xd0
| netns_bpf_link_create+0xfe/0x650
| __do_sys_bpf+0x153a/0x2a50
| do_syscall_64+0x59/0x300
| entry_SYSCALL_64_after_hwframe+0x44/0xa9
|
| Freed by task 198:
| save_stack+0x1b/0x40
| __kasan_slab_free+0x12f/0x180
| kfree+0xed/0x350
| process_one_work+0x4d1/0xa10
| worker_thread+0x7a/0x5c0
| kthread+0x1e3/0x240
| ret_from_fork+0x1f/0x30
|
| The buggy address belongs to the object at
ffff888119e0d700
| which belongs to the cache kmalloc-192 of size 192
| The buggy address is located 120 bytes inside of
| 192-byte region [
ffff888119e0d700,
ffff888119e0d7c0)
| The buggy address belongs to the page:
| page:
ffffea0004678340 refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0
| flags: 0x2fffe0000000200(slab)
| raw:
02fffe0000000200 ffffea00045ba8c0 0000000600000006 ffff88811a80ea80
| raw:
0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
|
ffff888119e0d600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
|
ffff888119e0d680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
| >
ffff888119e0d700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ^
|
ffff888119e0d780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
|
ffff888119e0d800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================
Remove the "fast-path" for releasing a link that got auto-detached by a
dying network namespace to fix it. This way as long as link is on the list
and netns_bpf mutex is held, we have a guarantee that link memory can be
accessed.
An alternative way to fix this issue would be to safely iterate over the
list of links and ensure there is no access to link object after detaching
it. But, at the moment, optimizing synchronization overhead on link release
without a workload in mind seems like an overkill.
Fixes:
ab53cad90eb1 ("bpf, netns: Keep a list of attached bpf_link's")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630164541.1329993-1-jakub@cloudflare.com
Alexei Starovoitov [Tue, 30 Jun 2020 17:46:39 +0000 (10:46 -0700)]
Merge branch 'fix-sockmap-flow_dissector-uapi'
Lorenz Bauer says:
====================
Both sockmap and flow_dissector ingnore various arguments passed to
BPF_PROG_ATTACH and BPF_PROG_DETACH. We can fix the attach case by
checking that the unused arguments are zero. I considered requiring
target_fd to be -1 instead of 0, but this leads to a lot of churn
in selftests. There is also precedent in that bpf_iter already
expects 0 for a similar field. I think that we can come up with a
work around for fd 0 should we need to in the future.
The detach case is more problematic: both cgroups and lirc2 verify
that attach_bpf_fd matches the currently attached program. This
way you need access to the program fd to be able to remove it.
Neither sockmap nor flow_dissector do this. flow_dissector even
has a check for CAP_NET_ADMIN because of this. The patch set
addresses this by implementing the desired behaviour.
There is a possibility for user space breakage: any callers that
don't provide the correct fd will fail with ENOENT. For sockmap
the risk is low: even the selftests assume that sockmap works
the way I described. For flow_dissector the story is less
straightforward, and the selftests use a variety of arguments.
I've includes fixes tags for the oldest commits that allow an easy
backport, however the behaviour dates back to when sockmap and
flow_dissector were introduced. What is the best way to handle these?
This set is based on top of Jakub's work "bpf, netns: Prepare
for multi-prog attachment" available at
https://lore.kernel.org/bpf/87k0zwmhtb.fsf@cloudflare.com/T/
Since v1:
- Adjust selftests
- Implement detach behaviour
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lorenz Bauer [Mon, 29 Jun 2020 09:56:30 +0000 (10:56 +0100)]
selftests: bpf: Pass program to bpf_prog_detach in flow_dissector
Calling bpf_prog_detach is incorrect, since it takes target_fd as
its argument. The intention here is to pass it as attach_bpf_fd,
so use bpf_prog_detach2 and pass zero for target_fd.
Fixes:
06716e04a043 ("selftests/bpf: Extend test_flow_dissector to cover link creation")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-7-lmb@cloudflare.com
Lorenz Bauer [Mon, 29 Jun 2020 09:56:29 +0000 (10:56 +0100)]
selftests: bpf: Pass program and target_fd in flow_dissector_reattach
Pass 0 as target_fd when attaching and detaching flow dissector.
Additionally, pass the expected program when detaching.
Fixes:
1f043f87bb59 ("selftests/bpf: Add tests for attaching bpf_link to netns")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-6-lmb@cloudflare.com
Lorenz Bauer [Mon, 29 Jun 2020 09:56:28 +0000 (10:56 +0100)]
bpf: sockmap: Require attach_bpf_fd when detaching a program
The sockmap code currently ignores the value of attach_bpf_fd when
detaching a program. This is contrary to the usual behaviour of
checking that attach_bpf_fd represents the currently attached
program.
Ensure that attach_bpf_fd is indeed the currently attached
program. It turns out that all sockmap selftests already do this,
which indicates that this is unlikely to cause breakage.
Fixes:
604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-5-lmb@cloudflare.com
Lorenz Bauer [Mon, 29 Jun 2020 09:56:27 +0000 (10:56 +0100)]
bpf: sockmap: Check value of unused args to BPF_PROG_ATTACH
Using BPF_PROG_ATTACH on a sockmap program currently understands no
flags or replace_bpf_fd, but accepts any value. Return EINVAL instead.
Fixes:
604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-4-lmb@cloudflare.com
Lorenz Bauer [Mon, 29 Jun 2020 09:56:26 +0000 (10:56 +0100)]
bpf: flow_dissector: Check value of unused flags to BPF_PROG_DETACH
Using BPF_PROG_DETACH on a flow dissector program supports neither
attach_flags nor attach_bpf_fd. Yet no value is enforced for them.
Enforce that attach_flags are zero, and require the current program
to be passed via attach_bpf_fd. This allows us to remove the check
for CAP_SYS_ADMIN, since userspace can now no longer remove
arbitrary flow dissector programs.
Fixes:
b27f7bb590ba ("flow_dissector: Move out netns_bpf prog callbacks")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-3-lmb@cloudflare.com
Lorenz Bauer [Mon, 29 Jun 2020 09:56:25 +0000 (10:56 +0100)]
bpf: flow_dissector: Check value of unused flags to BPF_PROG_ATTACH
Using BPF_PROG_ATTACH on a flow dissector program supports neither
target_fd, attach_flags or replace_bpf_fd but accepts any value.
Enforce that all of them are zero. This is fine for replace_bpf_fd
since its presence is indicated by BPF_F_REPLACE. It's more
problematic for target_fd, since zero is a valid fd. Should we
want to use the flag later on we'd have to add an exception for
fd 0. The alternative is to force a value like -1. This requires
more changes to tests. There is also precedent for using 0,
since bpf_iter uses this for target_fd as well.
Fixes:
b27f7bb590ba ("flow_dissector: Move out netns_bpf prog callbacks")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-2-lmb@cloudflare.com
Alexei Starovoitov [Tue, 30 Jun 2020 17:45:08 +0000 (10:45 -0700)]
Merge branch 'bpf-multi-prog-prep'
Jakub Sitnicki says:
====================
This patch set prepares ground for link-based multi-prog attachment for
future netns attach types, with BPF_SK_LOOKUP attach type in mind [0].
Two changes are needed in order to attach and run a series of BPF programs:
1) an bpf_prog_array of programs to run (patch #2), and
2) a list of attached links to keep track of attachments (patch #3).
Nothing changes for BPF flow_dissector. Just as before only one program can
be attached to netns.
In v3 I've simplified patch #2 that introduces bpf_prog_array to take
advantage of the fact that it will hold at most one program for now.
In particular, I'm no longer using bpf_prog_array_copy. It turned out to be
less suitable for link operations than I thought as it fails to append the
same BPF program.
bpf_prog_array_replace_item is also gone, because we know we always want to
replace the first element in prog_array.
Naturally the code that handles bpf_prog_array will need change once
more when there is a program type that allows multi-prog attachment. But I
feel it will be better to do it gradually and present it together with
tests that actually exercise multi-prog code paths.
[0] https://lore.kernel.org/bpf/
20200511185218.1422406-1-jakub@cloudflare.com/
v2 -> v3:
- Don't check if run_array is null in link update callback. (Martin)
- Allow updating the link with the same BPF program. (Andrii)
- Add patch #4 with a test for the above case.
- Kill bpf_prog_array_replace_item. Access the run_array directly.
- Switch from bpf_prog_array_copy() to bpf_prog_array_alloc(1, ...).
- Replace rcu_deref_protected & RCU_INIT_POINTER with rcu_replace_pointer.
- Drop Andrii's Ack from patch #2. Code changed.
v1 -> v2:
- Show with a (void) cast that bpf_prog_array_replace_item() return value
is ignored on purpose. (Andrii)
- Explain why bpf-cgroup cannot replace programs in bpf_prog_array based
on bpf_prog pointer comparison in patch #2 description. (Andrii)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jakub Sitnicki [Thu, 25 Jun 2020 14:13:57 +0000 (16:13 +0200)]
selftests/bpf: Test updating flow_dissector link with same program
This case, while not particularly useful, is worth covering because we
expect the operation to succeed as opposed when re-attaching the same
program directly with PROG_ATTACH.
While at it, update the tests summary that fell out of sync when tests
extended to cover links.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200625141357.910330-5-jakub@cloudflare.com
Jakub Sitnicki [Thu, 25 Jun 2020 14:13:56 +0000 (16:13 +0200)]
bpf, netns: Keep a list of attached bpf_link's
To support multi-prog link-based attachments for new netns attach types, we
need to keep track of more than one bpf_link per attach type. Hence,
convert net->bpf.links into a list, that currently can be either empty or
have just one item.
Instead of reusing bpf_prog_list from bpf-cgroup, we link together
bpf_netns_link's themselves. This makes list management simpler as we don't
have to allocate, initialize, and later release list elements. We can do
this because multi-prog attachment will be available only for bpf_link, and
we don't need to build a list of programs attached directly and indirectly
via links.
No functional changes intended.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200625141357.910330-4-jakub@cloudflare.com
Jakub Sitnicki [Thu, 25 Jun 2020 14:13:55 +0000 (16:13 +0200)]
bpf, netns: Keep attached programs in bpf_prog_array
Prepare for having multi-prog attachments for new netns attach types by
storing programs to run in a bpf_prog_array, which is well suited for
iterating over programs and running them in sequence.
After this change bpf(PROG_QUERY) may block to allocate memory in
bpf_prog_array_copy_to_user() for collected program IDs. This forces a
change in how we protect access to the attached program in the query
callback. Because bpf_prog_array_copy_to_user() can sleep, we switch from
an RCU read lock to holding a mutex that serializes updaters.
Because we allow only one BPF flow_dissector program to be attached to
netns at all times, the bpf_prog_array pointed by net->bpf.run_array is
always either detached (null) or one element long.
No functional changes intended.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200625141357.910330-3-jakub@cloudflare.com
Jakub Sitnicki [Thu, 25 Jun 2020 14:13:54 +0000 (16:13 +0200)]
flow_dissector: Pull BPF program assignment up to bpf-netns
Prepare for using bpf_prog_array to store attached programs by moving out
code that updates the attached program out of flow dissector.
Managing bpf_prog_array is more involved than updating a single bpf_prog
pointer. This will let us do it all from one place, bpf/net_namespace.c, in
the subsequent patch.
No functional change intended.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200625141357.910330-2-jakub@cloudflare.com
Eric Dumazet [Tue, 30 Jun 2020 00:04:17 +0000 (17:04 -0700)]
netfilter: ipset: call ip_set_free() instead of kfree()
Whenever ip_set_alloc() is used, allocated memory can either
use kmalloc() or vmalloc(). We should call kvfree() or
ip_set_free()
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 21935 Comm: syz-executor.3 Not tainted 5.8.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__phys_addr+0xa7/0x110 arch/x86/mm/physaddr.c:28
Code: 1d 7a 09 4c 89 e3 31 ff 48 d3 eb 48 89 de e8 d0 58 3f 00 48 85 db 75 0d e8 26 5c 3f 00 4c 89 e0 5b 5d 41 5c c3 e8 19 5c 3f 00 <0f> 0b e8 12 5c 3f 00 48 c7 c0 10 10 a8 89 48 ba 00 00 00 00 00 fc
RSP: 0000:
ffffc900018572c0 EFLAGS:
00010046
RAX:
0000000000040000 RBX:
0000000000000001 RCX:
ffffc9000fac3000
RDX:
0000000000040000 RSI:
ffffffff8133f437 RDI:
0000000000000007
RBP:
ffffc90098aff000 R08:
0000000000000000 R09:
ffff8880ae636cdb
R10:
0000000000000000 R11:
0000000000000000 R12:
0000408018aff000
R13:
0000000000080000 R14:
000000000000001d R15:
ffffc900018573d8
FS:
00007fc540c66700(0000) GS:
ffff8880ae600000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fc9dcd67200 CR3:
0000000059411000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
virt_to_head_page include/linux/mm.h:841 [inline]
virt_to_cache mm/slab.h:474 [inline]
kfree+0x77/0x2c0 mm/slab.c:3749
hash_net_create+0xbb2/0xd70 net/netfilter/ipset/ip_set_hash_gen.h:1536
ip_set_create+0x6a2/0x13c0 net/netfilter/ipset/ip_set_core.c:1128
nfnetlink_rcv_msg+0xbe8/0xea0 net/netfilter/nfnetlink.c:230
netlink_rcv_skb+0x15a/0x430 net/netlink/af_netlink.c:2469
nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:564
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e8/0x810 net/socket.c:2352
___sys_sendmsg+0xf3/0x170 net/socket.c:2406
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45cb19
Code: Bad RIP value.
RSP: 002b:
00007fc540c65c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00000000004fed80 RCX:
000000000045cb19
RDX:
0000000000000000 RSI:
0000000020001080 RDI:
0000000000000003
RBP:
000000000078bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00000000ffffffff
R13:
000000000000095e R14:
00000000004cc295 R15:
00007fc540c666d4
Fixes:
f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Fixes:
03c8b234e61a ("netfilter: ipset: Generalize extensions support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Andrii Nakryiko [Tue, 30 Jun 2020 06:15:00 +0000 (23:15 -0700)]
bpf: Enforce BPF ringbuf size to be the power of 2
BPF ringbuf assumes the size to be a multiple of page size and the power of
2 value. The latter is important to avoid division while calculating position
inside the ring buffer and using (N-1) mask instead. This patch fixes omission
to enforce power-of-2 size rule.
Fixes:
457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200630061500.1804799-1-andriin@fb.com
Christoph Hellwig [Mon, 29 Jun 2020 13:03:59 +0000 (15:03 +0200)]
xsk: Use dma_need_sync instead of reimplenting it
Use the dma_need_sync helper instead of (not always entirely correctly)
poking into the dma-mapping internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-5-hch@lst.de
Christoph Hellwig [Mon, 29 Jun 2020 13:03:58 +0000 (15:03 +0200)]
xsk: Remove a double pool->dev assignment in xp_dma_map
->dev is already assigned at the top of the function, remove the duplicate
one at the end.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-4-hch@lst.de
Christoph Hellwig [Mon, 29 Jun 2020 13:03:57 +0000 (15:03 +0200)]
xsk: Replace the cheap_dma flag with a dma_need_sync flag
Invert the polarity and better name the flag so that the use case is
properly documented.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-3-hch@lst.de
Christoph Hellwig [Mon, 29 Jun 2020 13:03:56 +0000 (15:03 +0200)]
dma-mapping: Add a new dma_need_sync API
Add a new API to check if calls to dma_sync_single_for_{device,cpu} are
required for a given DMA streaming mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-2-hch@lst.de
Cong Wang [Sat, 27 Jun 2020 07:12:24 +0000 (00:12 -0700)]
genetlink: get rid of family->attrbuf
genl_family_rcv_msg_attrs_parse() reuses the global family->attrbuf
when family->parallel_ops is false. However, family->attrbuf is not
protected by any lock on the genl_family_rcv_msg_doit() code path.
This leads to several different consequences, one of them is UAF,
like the following:
genl_family_rcv_msg_doit(): genl_start():
genl_family_rcv_msg_attrs_parse()
attrbuf = family->attrbuf
__nlmsg_parse(attrbuf);
genl_family_rcv_msg_attrs_parse()
attrbuf = family->attrbuf
__nlmsg_parse(attrbuf);
info->attrs = attrs;
cb->data = info;
netlink_unicast_kernel():
consume_skb()
genl_lock_dumpit():
genl_dumpit_info(cb)->attrs
Note family->attrbuf is an array of pointers to the skb data, once
the skb is freed, any dereference of family->attrbuf will be a UAF.
Maybe we could serialize the family->attrbuf with genl_mutex too, but
that would make the locking more complicated. Instead, we can just get
rid of family->attrbuf and always allocate attrbuf from heap like the
family->parallel_ops==true code path. This may add some performance
overhead but comparing with taking the global genl_mutex, it still
looks better.
Fixes:
75cdbdd08900 ("net: ieee802154: have genetlink code to parse the attrs during dumpit")
Fixes:
057af7071344 ("net: tipc: have genetlink code to parse the attrs during dumpit")
Reported-and-tested-by: syzbot+3039ddf6d7b13daf3787@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+80cad1e3cb4c41cde6ff@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+736bcbcb11b60d0c0792@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+520f8704db2b68091d44@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+c96e4dfb32f8987fdeed@syzkaller.appspotmail.com
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Jun 2020 23:58:30 +0000 (16:58 -0700)]
Merge tag 'mac80211-for-net-2020-06-29' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Couple of fixes/small things:
* TX control port status check fixed to not assume frame format
* mesh control port fixes
* error handling/leak fixes when starting AP, with HE attributes
* fix broadcast packet handling with encapsulation offload
* add new AKM suites
* and a small code cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 27 Jun 2020 20:31:50 +0000 (13:31 -0700)]
llc: make sure applications use ARPHRD_ETHER
syzbot was to trigger a bug by tricking AF_LLC with
non sensible addr->sllc_arphrd
It seems clear LLC requires an Ethernet device.
Back in commit
abf9d537fea2 ("llc: add support for SO_BINDTODEVICE")
Octavian Purdila added possibility for application to use a zero
value for sllc_arphrd, convert it to ARPHRD_ETHER to not cause
regressions on existing applications.
BUG: KASAN: use-after-free in __read_once_size include/linux/compiler.h:199 [inline]
BUG: KASAN: use-after-free in list_empty include/linux/list.h:268 [inline]
BUG: KASAN: use-after-free in waitqueue_active include/linux/wait.h:126 [inline]
BUG: KASAN: use-after-free in wq_has_sleeper include/linux/wait.h:160 [inline]
BUG: KASAN: use-after-free in skwq_has_sleeper include/net/sock.h:2092 [inline]
BUG: KASAN: use-after-free in sock_def_write_space+0x642/0x670 net/core/sock.c:2813
Read of size 8 at addr
ffff88801e0b4078 by task ksoftirqd/3/27
CPU: 3 PID: 27 Comm: ksoftirqd/3 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
__read_once_size include/linux/compiler.h:199 [inline]
list_empty include/linux/list.h:268 [inline]
waitqueue_active include/linux/wait.h:126 [inline]
wq_has_sleeper include/linux/wait.h:160 [inline]
skwq_has_sleeper include/net/sock.h:2092 [inline]
sock_def_write_space+0x642/0x670 net/core/sock.c:2813
sock_wfree+0x1e1/0x260 net/core/sock.c:1958
skb_release_head_state+0xeb/0x260 net/core/skbuff.c:652
skb_release_all+0x16/0x60 net/core/skbuff.c:663
__kfree_skb net/core/skbuff.c:679 [inline]
consume_skb net/core/skbuff.c:838 [inline]
consume_skb+0xfb/0x410 net/core/skbuff.c:832
__dev_kfree_skb_any+0xa4/0xd0 net/core/dev.c:2967
dev_kfree_skb_any include/linux/netdevice.h:3650 [inline]
e1000_unmap_and_free_tx_resource.isra.0+0x21b/0x3a0 drivers/net/ethernet/intel/e1000/e1000_main.c:1963
e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3854 [inline]
e1000_clean+0x4cc/0x1d10 drivers/net/ethernet/intel/e1000/e1000_main.c:3796
napi_poll net/core/dev.c:6532 [inline]
net_rx_action+0x508/0x1120 net/core/dev.c:6600
__do_softirq+0x262/0x98c kernel/softirq.c:292
run_ksoftirqd kernel/softirq.c:603 [inline]
run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595
smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165
kthread+0x361/0x430 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Allocated by task 8247:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
__kasan_kmalloc mm/kasan/common.c:513 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521
slab_post_alloc_hook mm/slab.h:584 [inline]
slab_alloc mm/slab.c:3320 [inline]
kmem_cache_alloc+0x121/0x710 mm/slab.c:3484
sock_alloc_inode+0x1c/0x1d0 net/socket.c:240
alloc_inode+0x68/0x1e0 fs/inode.c:230
new_inode_pseudo+0x19/0xf0 fs/inode.c:919
sock_alloc+0x41/0x270 net/socket.c:560
__sock_create+0xc2/0x730 net/socket.c:1384
sock_create net/socket.c:1471 [inline]
__sys_socket+0x103/0x220 net/socket.c:1513
__do_sys_socket net/socket.c:1522 [inline]
__se_sys_socket net/socket.c:1520 [inline]
__ia32_sys_socket+0x73/0xb0 net/socket.c:1520
do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline]
do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408
entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
Freed by task 17:
save_stack+0x23/0x90 mm/kasan/common.c:72
set_track mm/kasan/common.c:80 [inline]
kasan_set_free_info mm/kasan/common.c:335 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
__cache_free mm/slab.c:3426 [inline]
kmem_cache_free+0x86/0x320 mm/slab.c:3694
sock_free_inode+0x20/0x30 net/socket.c:261
i_callback+0x44/0x80 fs/inode.c:219
__rcu_reclaim kernel/rcu/rcu.h:222 [inline]
rcu_do_batch kernel/rcu/tree.c:2183 [inline]
rcu_core+0x570/0x1540 kernel/rcu/tree.c:2408
rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2417
__do_softirq+0x262/0x98c kernel/softirq.c:292
The buggy address belongs to the object at
ffff88801e0b4000
which belongs to the cache sock_inode_cache of size 1152
The buggy address is located 120 bytes inside of
1152-byte region [
ffff88801e0b4000,
ffff88801e0b4480)
The buggy address belongs to the page:
page:
ffffea0000782d00 refcount:1 mapcount:0 mapping:
ffff88807aa59c40 index:0xffff88801e0b4ffd
raw:
00fffe0000000200 ffffea00008e6c88 ffffea0000782d48 ffff88807aa59c40
raw:
ffff88801e0b4ffd ffff88801e0b4000 0000000100000003 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88801e0b3f00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff88801e0b3f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>
ffff88801e0b4000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801e0b4080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801e0b4100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes:
abf9d537fea2 ("llc: add support for SO_BINDTODEVICE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 26 Jun 2020 18:25:27 +0000 (11:25 -0700)]
net: explain the lockdep annotations for dev_uc_unsync()
The lockdep annotations for dev_uc_unsync() and dev_mc_unsync()
are not easy to understand, so add some comments to explain
why they are correct.
Similar for the rest netif_addr_lock_bh() cases, they don't
need nested version.
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 26 Jun 2020 18:24:22 +0000 (11:24 -0700)]
net: get rid of lockdep_set_class_and_subclass()
lockdep_set_class_and_subclass() is meant to reduce
the _nested() annotations by assigning a default subclass.
For addr_list_lock, we have to compute the subclass at
run-time as the netdevice topology changes after creation.
So, we should just get rid of these
lockdep_set_class_and_subclass() and stick with our _nested()
annotations.
Fixes:
845e0ebb4408 ("net: change addr_list_lock back to static key")
Suggested-by: Taehee Yoo <ap420073@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sun, 28 Jun 2020 14:49:35 +0000 (17:49 +0300)]
lib: packing: add documentation for pbuflen argument
Fixes sparse warning:
Function parameter or member 'pbuflen' not described in 'packing'
Fixes:
554aae35007e ("lib: Add support for generic packing operations")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Sun, 28 Jun 2020 13:45:16 +0000 (15:45 +0200)]
bridge: mrp: Fix endian conversion and some other warnings
The following sparse warnings are fixed:
net/bridge/br_mrp.c:106:18: warning: incorrect type in assignment (different base types)
net/bridge/br_mrp.c:106:18: expected unsigned short [usertype]
net/bridge/br_mrp.c:106:18: got restricted __be16 [usertype]
net/bridge/br_mrp.c:281:23: warning: incorrect type in argument 1 (different modifiers)
net/bridge/br_mrp.c:281:23: expected struct list_head *entry
net/bridge/br_mrp.c:281:23: got struct list_head [noderef] *
net/bridge/br_mrp.c:332:28: warning: incorrect type in argument 1 (different modifiers)
net/bridge/br_mrp.c:332:28: expected struct list_head *new
net/bridge/br_mrp.c:332:28: got struct list_head [noderef] *
net/bridge/br_mrp.c:332:40: warning: incorrect type in argument 2 (different modifiers)
net/bridge/br_mrp.c:332:40: expected struct list_head *head
net/bridge/br_mrp.c:332:40: got struct list_head [noderef] *
net/bridge/br_mrp.c:682:29: warning: incorrect type in argument 1 (different modifiers)
net/bridge/br_mrp.c:682:29: expected struct list_head const *head
net/bridge/br_mrp.c:682:29: got struct list_head [noderef] *
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
2f1a11ae11d222 ("bridge: mrp: Add MRP interface.")
Fixes:
4b8d7d4c599182 ("bridge: mrp: Extend bridge interface")
Fixes:
9a9f26e8f7ea30 ("bridge: mrp: Connect MRP API with the switchdev API")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Sun, 28 Jun 2020 15:33:28 +0000 (08:33 -0700)]
Merge branch 'fix-sockmap'
John Fastabend says:
====================
Fix a splat introduced by recent changes to avoid skipping ingress policy
when kTLS is enabled. The RCU splat was introduced because in the non-TLS
case the caller is wrapped in an rcu_read_lock/unlock. But, in the TLS
case we have a reference to the psock and the caller did not wrap its
call in rcu_read_lock/unlock.
To fix extend the RCU section to include the redirect case which was
missed. From v1->v2 I changed the location a bit to simplify the code
some. See patch 1.
But, then Martin asked why it was not needed in the non-TLS case. The
answer for patch 1 was, as stated above, because the caller has the
rcu read lock. However, there was still a missing case where a BPF
user could in-theory line up a set of parameters to hit a case
where the code was entered from strparser side from a different context
then the initial caller. To hit this user would need a parser program
to return value greater than skb->len then an ENOMEM error could happen
in the strparser codepath triggering strparser to retry from a workqueue
and without rcu_read_lock original caller used. See patch 2 for details.
Finally, we don't actually have any selftests for parser returning a
value geater than skb->len so add one in patch 3. This is especially
needed because at least I don't have any code that uses the parser
to return value greater than skb->len. So I wouldn't have caught any
errors here in my own testing.
Thanks, John
v1->v2: simplify code in patch 1 some and add patches 2 and 3.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
John Fastabend [Thu, 25 Jun 2020 23:13:38 +0000 (16:13 -0700)]
bpf, sockmap: Add ingres skb tests that utilize merge skbs
Add a test to check strparser merging skbs is working.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159312681884.18340.4922800172600252370.stgit@john-XPS-13-9370
John Fastabend [Thu, 25 Jun 2020 23:13:18 +0000 (16:13 -0700)]
bpf, sockmap: RCU dereferenced psock may be used outside RCU block
If an ingress verdict program specifies message sizes greater than
skb->len and there is an ENOMEM error due to memory pressure we
may call the rcv_msg handler outside the strp_data_ready() caller
context. This is because on an ENOMEM error the strparser will
retry from a workqueue. The caller currently protects the use of
psock by calling the strp_data_ready() inside a rcu_read_lock/unlock
block.
But, in above workqueue error case the psock is accessed outside
the read_lock/unlock block of the caller. So instead of using
psock directly we must do a look up against the sk again to
ensure the psock is available.
There is an an ugly piece here where we must handle
the case where we paused the strp and removed the psock. On
psock removal we first pause the strparser and then remove
the psock. If the strparser is paused while an skb is
scheduled on the workqueue the skb will be dropped on the
flow and kfree_skb() is called. If the workqueue manages
to get called before we pause the strparser but runs the rcvmsg
callback after the psock is removed we will hit the unlikely
case where we run the sockmap rcvmsg handler but do not have
a psock. For now we will follow strparser logic and drop the
skb on the floor with skb_kfree(). This is ugly because the
data is dropped. To date this has not caused problems in practice
because either the application controlling the sockmap is
coordinating with the datapath so that skbs are "flushed"
before removal or we simply wait for the sock to be closed before
removing it.
This patch fixes the describe RCU bug and dropping the skb doesn't
make things worse. Future patches will improve this by allowing
the normal case where skbs are not merged to skip the strparser
altogether. In practice many (most?) use cases have no need to
merge skbs so its both a code complexity hit as seen above and
a performance issue. For example, in the Cilium case we always
set the strparser up to return sbks 1:1 without any merging and
have avoided above issues.
Fixes:
e91de6afa81c1 ("bpf: Fix running sk_skb program types with ktls")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159312679888.18340.15248924071966273998.stgit@john-XPS-13-9370