Nicolas Ferre [Wed, 3 Apr 2019 10:23:57 +0000 (12:23 +0200)]
dmaengine: at_xdmac: remove BUG_ON macro in tasklet
[ Upstream commit
e2c114c06da2d9ffad5b16690abf008d6696f689 ]
Even if this case shouldn't happen when controller is properly programmed,
it's still better to avoid dumping a kernel Oops for this.
As the sequence may happen only for debugging purposes, log the error and
just finish the tasklet call.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robin Murphy [Tue, 16 Apr 2019 15:24:24 +0000 (16:24 +0100)]
perf/arm-cci: Remove broken race mitigation
[ Upstream commit
0d2e2a82d4de298d006bf8eddc86829e3c7da820 ]
Uncore PMU drivers face an awkward cyclic dependency wherein:
- They have to pick a valid online CPU to associate with before
registering the PMU device, since it will get exposed to userspace
immediately.
- The PMU registration has to be be at least partly complete before
hotplug events can be handled, since trying to migrate an
uninitialised context would be bad.
- The hotplug handler has to be ready as soon as a CPU is chosen, lest
it go offline without the user-visible cpumask value getting updated.
The arm-cci driver has tried to solve this by using get_cpu() to pick
the current CPU and prevent it from disappearing while both
registrations are performed, but that results in taking mutexes with
preemption disabled, which makes certain configurations very unhappy:
[ 1.983337] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:2004
[ 1.983340] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
[ 1.983342] Preemption disabled at:
[ 1.983353] [<
ffffff80089801f4>] cci_pmu_probe+0x1dc/0x488
[ 1.983360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.20-rt8-yocto-preempt-rt #1
[ 1.983362] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[ 1.983364] Call trace:
[ 1.983369] dump_backtrace+0x0/0x158
[ 1.983372] show_stack+0x24/0x30
[ 1.983378] dump_stack+0x80/0xa4
[ 1.983383] ___might_sleep+0x138/0x160
[ 1.983386] __might_sleep+0x58/0x90
[ 1.983391] __rt_mutex_lock_state+0x30/0xc0
[ 1.983395] _mutex_lock+0x24/0x30
[ 1.983400] perf_pmu_register+0x2c/0x388
[ 1.983404] cci_pmu_probe+0x2bc/0x488
[ 1.983409] platform_drv_probe+0x58/0xa8
It is not feasible to resolve all the possible races outside of the perf
core itself, so address the immediate bug by following the example of
nearly every other PMU driver and not even trying to do so. Registering
the hotplug notifier first should minimise the window in which things
can go wrong, so that's about as much as we can reasonably do here. This
also revealed an additional race in assigning the global pointer too
late relative to the hotplug notifier, which gets fixed in the process.
Reported-by: Li, Meng <Meng.Li@windriver.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Douglas Anderson [Fri, 12 Apr 2019 16:17:47 +0000 (09:17 -0700)]
clk: rockchip: undo several noc and special clocks as critical on rk3288
[ Upstream commit
f4033db5b84ebe4b32c25ba2ed65ab20b628996a ]
This is mostly a revert of commit
55bb6a633c33 ("clk: rockchip: mark
noc and some special clk as critical on rk3288") except that we're
keeping "pmu_hclk_otg0" as critical still.
NOTE: turning these clocks off doesn't seem to do a whole lot in terms
of power savings (checking the power on the logic rail). It appears
to save maybe 1-2mW. ...but still it seems like we should turn the
clocks off if they aren't needed.
About "pmu_hclk_otg0" (the one clock from the original commit we're
still keeping critical) from an email thread:
> pmu ahb clock
>
> Function: Clock to pmu module when hibernation and/or ADP is
> enabled. Must be greater than or equal to 30 MHz.
>
> If the SOC design does not support hibernation/ADP function, only have
> hclk_otg, this clk can be switched according to the usage of otg.
> If the SOC design support hibernation/ADP, has two clocks, hclk_otg and
> pmu_hclk_otg0.
> Hclk_otg belongs to the closed part of otg logic, which can be switched
> according to the use of otg.
>
> pmu_hclk_otg0 belongs to the always on part.
>
> As for whether pmu_hclk_otg0 can be turned off when otg is not in use,
> we have not tested. IC suggest make pmu_hclk_otg0 always on.
For the rest of the clocks:
atclk: No documentation about this clock other than that it goes to
the CPU. CPU functions fine without it on. Maybe needed for JTAG?
jtag: Presumably this clock is only needed if you're debugging with
JTAG. It doesn't seem like it makes sense to waste power for every
rk3288 user. In any case to do JTAG you'd need private patches to
adjust the pinctrl the mux the JTAG out anyway.
pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two
clocks on only during kernel panics in order to access some coresight
registers. Since nothing in the upstream kernel does this we should
be able to leave them off safely. Maybe also needed for JTAG?
hsicphy12m_xin12m: There is no indication of why this clock would need
to be turned on for boards that don't use HSIC.
pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn
these 4 clocks on only when doing DDR transitions and they are off
otherwise. I see no reason why they'd need to be on in the upstream
kernel which doesn't support DDRFreq.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Fri, 12 Apr 2019 06:02:22 +0000 (14:02 +0800)]
pinctrl: samsung: fix leaked of_node references
[ Upstream commit
44b9f86cd41db6c522effa5aec251d664a52fbc0 ]
The call to of_find_compatible_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:76:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:82:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Fri, 12 Apr 2019 06:02:19 +0000 (14:02 +0800)]
pinctrl: pistachio: fix leaked of_node references
[ Upstream commit
44a4455ac2c6b0981eace683a2b6eccf47689022 ]
The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 20 Apr 2019 11:22:10 +0000 (13:22 +0200)]
HID: logitech-hidpp: use RAP instead of FAP to get the protocol version
[ Upstream commit
096377525cdb8251e4656085efc988bdf733fb4c ]
According to the logitech_hidpp_2.0_specification_draft_2012-06-04.pdf doc:
https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf
We should use a register-access-protocol request using the short input /
output report ids. This is necessary because 27MHz HID++ receivers have
a max-packetsize on their HIP++ endpoint of 8, so they cannot support
long reports. Using a feature-access-protocol request (which is always
long or very-long) with these will cause a timeout error, followed by
the hidpp driver treating the device as not being HID++ capable.
This commit fixes this by switching to using a rap request to get the
protocol version.
Besides being tested with a (046d:c517) 27MHz receiver with various
27MHz keyboards and mice, this has also been tested to not cause
regressions on a non-unifying dual-HID++ nano receiver (046d:c534) with
k270 and m185 HID++-2.0 devices connected and on a unifying/dj receiver
(046d:c52b) with a HID++-2.0 Logitech Rechargeable Touchpad T650.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Balakrishna Godavarthi [Mon, 1 Apr 2019 09:49:08 +0000 (15:19 +0530)]
Bluetooth: hci_qca: Give enough time to ROME controller to bootup.
[ Upstream commit
7f09d5a6c33be66a5ca19bf9dd1c2d90c5dfcf0d ]
This patch enables enough time to ROME controller to bootup
after we bring the enable pin out of reset.
Fixes:
05ba533c5c11 ("Bluetooth: hci_qca: Add serdev support").
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Rocky Liao <rjliao@codeaurora.org>
Tested-by: Rocky Liao <rjliao@codeaurora.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Wed, 24 Apr 2019 07:19:25 +0000 (09:19 +0200)]
mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions
[ Upstream commit
29da93fea3ea39ab9b12270cc6be1b70ef201c9e ]
Randy reported objtool triggered on his (GCC-7.4) build:
lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x315: call to __ubsan_handle_add_overflow() with UACCESS enabled
lib/strnlen_user.o: warning: objtool: strnlen_user()+0x337: call to __ubsan_handle_sub_overflow() with UACCESS enabled
This is due to UBSAN generating signed-overflow-UB warnings where it
should not. Prior to GCC-8 UBSAN ignored -fwrapv (which the kernel
uses through -fno-strict-overflow).
Make the functions use 'unsigned long' throughout.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: http://lkml.kernel.org/r/20190424072208.754094071@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Kosina [Wed, 24 Apr 2019 07:04:57 +0000 (09:04 +0200)]
x86/mm: Remove in_nmi() warning from 64-bit implementation of vmalloc_fault()
[ Upstream commit
a65c88e16f32aa9ef2e8caa68ea5c29bd5eb0ff0 ]
In-NMI warnings have been added to vmalloc_fault() via:
ebc8827f75 ("x86: Barf when vmalloc and kmemcheck faults happen in NMI")
back in the time when our NMI entry code could not cope with nested NMIs.
These days, it's perfectly fine to take a fault in NMI context and we
don't have to care about the fact that IRET from the fault handler might
cause NMI nesting.
This warning has already been removed from 32-bit implementation of
vmalloc_fault() in:
6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")
but the 64-bit version was omitted.
Remove the bogus warning also from 64-bit implementation of vmalloc_fault().
Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")
Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1904240902280.9803@cbobk.fhfr.pm
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Andrzej Siewior [Wed, 24 Apr 2019 08:52:53 +0000 (10:52 +0200)]
smpboot: Place the __percpu annotation correctly
[ Upstream commit
d4645d30b50d1691c26ff0f8fa4e718b08f8d3bb ]
The test robot reported a wrong assignment of a per-CPU variable which
it detected by using sparse and sent a report. The assignment itself is
correct. The annotation for sparse was wrong and hence the report.
The first pointer is a "normal" pointer and points to the per-CPU memory
area. That means that the __percpu annotation has to be moved.
Move the __percpu annotation to pointer which points to the per-CPU
area. This change affects only the sparse tool (and is ignored by the
compiler).
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
f97f8f06a49fe ("smpboot: Provide infrastructure for percpu hotplug threads")
Link: http://lkml.kernel.org/r/20190424085253.12178-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Tue, 23 Apr 2019 18:38:27 +0000 (11:38 -0700)]
x86/build: Move _etext to actual end of .text
[ Upstream commit
392bef709659abea614abfe53cf228e7a59876a4 ]
When building x86 with Clang LTO and CFI, CFI jump regions are
automatically added to the end of the .text section late in linking. As a
result, the _etext position was being labelled before the appended jump
regions, causing confusion about where the boundaries of the executable
region actually are in the running kernel, and broke at least the fault
injection code. This moves the _etext mark to outside (and immediately
after) the .text area, as it already the case on other architectures
(e.g. arm64, arm).
Reported-and-tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190423183827.GA4012@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Farhan Ali [Mon, 8 Apr 2019 21:05:33 +0000 (17:05 -0400)]
vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdev
[ Upstream commit
b49bdc8602b7c9c7a977758bee4125683f73e59f ]
When releasing the vfio-ccw mdev, we currently do not release
any existing channel program and its pinned pages. This can
lead to the following warning:
[1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1]
....
1038876.561921] Call Trace:
[1038876.561935] ([<
00000009897fb870>] 0x9897fb870)
[1038876.561949] [<
000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1]
[1038876.561965] [<
000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio]
[1038876.561978] [<
000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio]
[1038876.562024] [<
000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm]
[1038876.562045] [<
000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm]
[1038876.562065] [<
000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm]
[1038876.562083] [<
000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm]
[1038876.562098] [<
00000000003c2dc4>] __fput+0x144/0x228
[1038876.562113] [<
000000000016ee82>] task_work_run+0x8a/0xd8
[1038876.562125] [<
000000000014c7a8>] do_exit+0x5d8/0xd90
[1038876.562140] [<
000000000014d084>] do_group_exit+0xc4/0xc8
[1038876.562155] [<
000000000015c046>] get_signal+0x9ae/0xa68
[1038876.562169] [<
0000000000108d66>] do_signal+0x66/0x768
[1038876.562185] [<
0000000000b9e37e>] system_call+0x1ea/0x2d8
[1038876.562195] 2 locks held by qemu-system-s39/144727:
[1038876.562205] #0:
00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio]
[1038876.562230] #1:
00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1]
[1038876.562250] Last Breaking-Event-Address:
[1038876.562262] [<
000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1]
[1038876.562272] irq event stamp: 4236481
[1038876.562287] hardirqs last enabled at (4236489): [<
00000000001cee7a>] console_unlock+0x6d2/0x740
[1038876.562299] hardirqs last disabled at (4236496): [<
00000000001ce87e>] console_unlock+0xd6/0x740
[1038876.562311] softirqs last enabled at (4234162): [<
0000000000b9fa1e>] __do_softirq+0x556/0x598
[1038876.562325] softirqs last disabled at (4234153): [<
000000000014e4cc>] irq_exit+0xac/0x108
[1038876.562337] ---[ end trace
6c96d467b1c3ca06 ]---
Similarly we do not free the channel program when we are removing
the vfio-ccw device. Let's fix this by resetting the device and freeing
the channel program and pinned pages in the release path. For the remove
path we can just quiesce the device, since in the remove path the mediated
device is going away for good and so we don't need to do a full reset.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <
ae9f20dc8873f2027f7b3c5d2aaa0bdfe06850b8.
1554756534.git.alifm@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Farhan Ali [Mon, 8 Apr 2019 21:05:31 +0000 (17:05 -0400)]
vfio-ccw: Do not call flush_workqueue while holding the spinlock
[ Upstream commit
cea5dde42a83b5f0a039da672f8686455936b8d8 ]
Currently we call flush_workqueue while holding the subchannel
spinlock. But flush_workqueue function can go to sleep, so
do not call the function while holding the spinlock.
Fixes the following bug:
[ 285.203430] BUG: scheduling while atomic: bash/14193/0x00000002
[ 285.203434] INFO: lockdep is turned off.
....
[ 285.203485] Preemption disabled at:
[ 285.203488] [<
000003ff80243e5c>] vfio_ccw_sch_quiesce+0xbc/0x120 [vfio_ccw]
[ 285.203496] CPU: 7 PID: 14193 Comm: bash Tainted: G W
....
[ 285.203504] Call Trace:
[ 285.203510] ([<
0000000000113772>] show_stack+0x82/0xd0)
[ 285.203514] [<
0000000000b7a102>] dump_stack+0x92/0xd0
[ 285.203518] [<
000000000017b8be>] __schedule_bug+0xde/0xf8
[ 285.203524] [<
0000000000b95b5a>] __schedule+0x7a/0xc38
[ 285.203528] [<
0000000000b9678a>] schedule+0x72/0xb0
[ 285.203533] [<
0000000000b9bfbc>] schedule_timeout+0x34/0x528
[ 285.203538] [<
0000000000b97608>] wait_for_common+0x118/0x1b0
[ 285.203544] [<
0000000000166d6a>] flush_workqueue+0x182/0x548
[ 285.203550] [<
000003ff80243e6e>] vfio_ccw_sch_quiesce+0xce/0x120 [vfio_ccw]
[ 285.203556] [<
000003ff80245278>] vfio_ccw_mdev_reset+0x38/0x70 [vfio_ccw]
[ 285.203562] [<
000003ff802458b0>] vfio_ccw_mdev_remove+0x40/0x78 [vfio_ccw]
[ 285.203567] [<
000003ff801a499c>] mdev_device_remove_ops+0x3c/0x80 [mdev]
[ 285.203573] [<
000003ff801a4d5c>] mdev_device_remove+0xc4/0x130 [mdev]
[ 285.203578] [<
000003ff801a5074>] remove_store+0x6c/0xa8 [mdev]
[ 285.203582] [<
000000000046f494>] kernfs_fop_write+0x14c/0x1f8
[ 285.203588] [<
00000000003c1530>] __vfs_write+0x38/0x1a8
[ 285.203593] [<
00000000003c187c>] vfs_write+0xb4/0x198
[ 285.203597] [<
00000000003c1af2>] ksys_write+0x5a/0xb0
[ 285.203601] [<
0000000000b9e270>] system_call+0xdc/0x2d8
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <
626bab8bb2958ae132452e1ddaf1b20882ad5a9d.
1554756534.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Parav Pandit [Wed, 10 Apr 2019 08:23:04 +0000 (11:23 +0300)]
RDMA/cma: Consider scope_id while binding to ipv6 ll address
[ Upstream commit
5d7ed2f27bbd482fd29e6b2e204b1a1ee8a0b268 ]
When two netdev have same link local addresses (such as vlan and non
vlan), two rdma cm listen id should be able to bind to following different
addresses.
listener-1: addr=lla, scope_id=A, port=X
listener-2: addr=lla, scope_id=B, port=X
However while comparing the addresses only addr and port are considered,
due to which 2nd listener fails to listen.
In below example of two listeners, 2nd listener is failing with address in
use error.
$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545&
$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545
rdma_bind_addr: Address already in use
To overcome this, consider the scope_ids as well which forms the accurate
IPv6 link local address.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Wed, 24 Apr 2019 16:48:28 +0000 (00:48 +0800)]
bcache: avoid clang -Wunintialized warning
[ Upstream commit
78d4eb8ad9e1d413449d1b7a060f50b6efa81ebd ]
clang has identified a code path in which it thinks a
variable may be unused:
drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
fifo_pop(&ca->free_inc, bucket);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
#define fifo_pop(fifo, i) fifo_pop_front(fifo, (i))
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front'
if (_r) { \
^~
drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here
allocator_wait(ca, bch_allocator_push(ca, bucket));
^~~~~~
drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait'
if (cond) \
^~~~
drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true
fifo_pop(&ca->free_inc, bucket);
^
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
#define fifo_pop(fifo, i) fifo_pop_front(fifo, (i))
^
drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front'
if (_r) { \
^
drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning
long bucket;
^
This cannot happen in practice because we only enter the loop
if there is at least one element in the list.
Slightly rearranging the code makes this clearer to both the
reader and the compiler, which avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Wed, 24 Apr 2019 16:48:34 +0000 (00:48 +0800)]
bcache: add failure check to run_cache_set() for journal replay
[ Upstream commit
ce3e4cfb59cb382f8e5ce359238aa580d4ae7778 ]
Currently run_cache_set() has no return value, if there is failure in
bch_journal_replay(), the caller of run_cache_set() has no idea about
such failure and just continue to execute following code after
run_cache_set(). The internal failure is triggered inside
bch_journal_replay() and being handled in async way. This behavior is
inefficient, while failure handling inside bch_journal_replay(), cache
register code is still running to start the cache set. Registering and
unregistering code running as same time may introduce some rare race
condition, and make the code to be more hard to be understood.
This patch adds return value to run_cache_set(), and returns -EIO if
bch_journal_rreplay() fails. Then caller of run_cache_set() may detect
such failure and stop registering code flow immedidately inside
register_cache_set().
If journal replay fails, run_cache_set() can report error immediately
to register_cache_set(). This patch makes the failure handling for
bch_journal_replay() be in synchronized way, easier to understand and
debug, and avoid poetential race condition for register-and-unregister
in same time.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tang Junhui [Wed, 24 Apr 2019 16:48:41 +0000 (00:48 +0800)]
bcache: fix failure in journal relplay
[ Upstream commit
631207314d88e9091be02fbdd1fdadb1ae2ed79a ]
journal replay failed with messages:
Sep 10 19:10:43 ceph kernel: bcache: error on
bb379a64-e44e-4812-b91d-
a5599871a3b1: bcache: journal entries
2057493-2057567 missing! (replaying 2057493-2076601), disabling
caching
The reason is in journal_reclaim(), when discard is enabled, we send
discard command and reclaim those journal buckets whose seq is old
than the last_seq_now, but before we write a journal with last_seq_now,
the machine is restarted, so the journal with the last_seq_now is not
written to the journal bucket, and the last_seq_wrote in the newest
journal is old than last_seq_now which we expect to be, so when we doing
replay, journals from last_seq_wrote to last_seq_now are missing.
It's hard to write a journal immediately after journal_reclaim(),
and it harmless if those missed journal are caused by discarding
since those journals are already wrote to btree node. So, if miss
seqs are started from the beginning journal, we treat it as normal,
and only print a message to show the miss journal, and point out
it maybe caused by discarding.
Patch v2 add a judgement condition to ignore the missed journal
only when discard enabled as Coly suggested.
(Coly Li: rebase the patch with other changes in bch_journal_replay())
Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com>
Tested-by: Dennis Schridde <devurandom@gmx.net>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Coly Li [Wed, 24 Apr 2019 16:48:36 +0000 (00:48 +0800)]
bcache: return error immediately in bch_journal_replay()
[ Upstream commit
68d10e6979a3b59e3cd2e90bfcafed79c4cf180a ]
When failure happens inside bch_journal_replay(), calling
cache_set_err_on() and handling the failure in async way is not a good
idea. Because after bch_journal_replay() returns, registering code will
continue to execute following steps, and unregistering code triggered
by cache_set_err_on() is running in same time. First it is unnecessary
to handle failure and unregister cache set in an async way, second there
might be potential race condition to run register and unregister code
for same cache set.
So in this patch, if failure happens in bch_journal_replay(), we don't
call cache_set_err_on(), and just print out the same error message to
kernel message buffer, then return -EIO immediately caller. Then caller
can detect such failure and handle it in synchrnozied way.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shenghui Wang [Wed, 24 Apr 2019 16:48:43 +0000 (00:48 +0800)]
bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set
[ Upstream commit
95f18c9d1310730d075499a75aaf13bcd60405a7 ]
In the CACHE_SYNC branch of run_cache_set(), LIST_HEAD(journal) is used
to collect journal_replay(s) and filled by bch_journal_read().
If all goes well, bch_journal_replay() will release the list of
jounal_replay(s) at the end of the branch.
If something goes wrong, code flow will jump to the label "err:" and leave
the list unreleased.
This patch will release the list of journal_replay(s) in the case of
error detected.
v1 -> v2:
* Move the release code to the location after label 'err:' to
simply the change.
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Thu, 18 Apr 2019 08:17:34 +0000 (10:17 +0200)]
crypto: sun4i-ss - Fix invalid calculation of hash end
[ Upstream commit
f87391558acf816b48f325a493d81d45dec40da0 ]
When nbytes < 4, end is wronlgy set to a negative value which, due to
uint, is then interpreted to a large value leading to a deadlock in the
following code.
This patch fix this problem.
Fixes:
6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Wed, 24 Apr 2019 18:53:18 +0000 (11:53 -0700)]
nvme-rdma: fix a NULL deref when an admin connect times out
[ Upstream commit
1007709d7d06fab09bf2d007657575958676282b ]
If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.
Fixes:
4c174e636674 ("nvme-rdma: fix timeout handler")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sagi Grimberg [Mon, 11 Mar 2019 22:02:25 +0000 (15:02 -0700)]
nvme: set 0 capacity if namespace block size exceeds PAGE_SIZE
[ Upstream commit
01fa017484ad98fccdeaab32db0077c574b6bd6f ]
If our target exposed a namespace with a block size that is greater
than PAGE_SIZE, set 0 capacity on the namespace as we do not support it.
This issue encountered when the nvmet namespace was backed by a tempfile.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Tue, 12 Mar 2019 08:05:02 +0000 (03:05 -0500)]
net: cw1200: fix a NULL pointer dereference
[ Upstream commit
0ed2a005347400500a39ea7c7318f1fea57fb3ca ]
In case create_singlethread_workqueue fails, the fix free the
hardware and returns NULL to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aditya Pakki [Sat, 23 Mar 2019 20:49:16 +0000 (15:49 -0500)]
rsi: Fix NULL pointer dereference in kmalloc
[ Upstream commit
d5414c2355b20ea8201156d2e874265f1cb0d775 ]
kmalloc can fail in rsi_register_rates_channels but memcpy still attempts
to write to channels. The patch replaces these calls with kmemdup and
passes the error upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Thu, 4 Apr 2019 08:44:23 +0000 (11:44 +0300)]
mwifiex: prevent an array overflow
[ Upstream commit
b4c35c17227fe437ded17ce683a6927845f8c4a4 ]
The "rate_index" is only used as an index into the phist_data->rx_rate[]
array in the mwifiex_hist_data_set() function. That array has
MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some
debugfs information. The "rate_index" variable comes from the network
skb->data[] and it is a u8 so it's in the 0-255 range. We need to cap
it to prevent an array overflow.
Fixes:
cbf6e05527a7 ("mwifiex: add rx histogram statistics support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Baluta [Sun, 21 Apr 2019 19:39:08 +0000 (19:39 +0000)]
ASoC: fsl_sai: Update is_slave_mode with correct value
[ Upstream commit
ddb351145a967ee791a0fb0156852ec2fcb746ba ]
is_slave_mode defaults to false because sai structure
that contains it is kzalloc'ed.
Anyhow, if we decide to set the following configuration
SAI slave -> SAI master, is_slave_mode will remain set on true
although SAI being master it should be set to false.
Fix this by updating is_slave_mode for each call of
fsl_sai_set_dai_fmt.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Sat, 13 Apr 2019 10:34:47 +0000 (11:34 +0100)]
slimbus: fix a potential NULL pointer dereference in of_qcom_slim_ngd_register
[ Upstream commit
06d5d6b7f9948a89543e1160ef852d57892c750d ]
In case platform_device_alloc fails, the fix returns an error
code to avoid the NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel T. Lee [Tue, 23 Apr 2019 20:24:56 +0000 (05:24 +0900)]
libbpf: fix samples/bpf build failure due to undefined UINT32_MAX
[ Upstream commit
32e621e55496a0009f44fe4914cd4a23cade4984 ]
Currently, building bpf samples will cause the following error.
./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) ..
#define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */
^
./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE'
extern char bpf_log_buf[BPF_LOG_BUF_SIZE];
^~~~~~~~~~~~~~~~
Due to commit
4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error")
hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is
defined in <stdint.h> header.
Even with this change, bpf selftests are running fine since these are built
with clang and it includes header(-idirafter) from clang/6.0.0/include.
(it has <stdint.h>)
clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \
-idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \
-Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \
llc -march=bpf -mcpu=generic -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o
But bpf samples are compiled with GCC, and it only searches and includes
headers declared at the target file. As '#include <stdint.h>' hasn't been
declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples.
gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \
-O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \
-I./tools/ lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c;
This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h
to fix this problem.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Matyukevich [Tue, 26 Mar 2019 09:27:37 +0000 (09:27 +0000)]
mac80211/cfg80211: update bss channel on channel switch
[ Upstream commit
5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 ]
FullMAC STAs have no way to update bss channel after CSA channel switch
completion. As a result, user-space tools may provide inconsistent
channel info. For instance, consider the following two commands:
$ sudo iw dev wlan0 link
$ sudo iw dev wlan0 info
The latter command gets channel info from the hardware, so most probably
its output will be correct. However the former command gets channel info
from scan cache, so its output will contain outdated channel info.
In fact, current bss channel info will not be updated until the
next [re-]connect.
Note that mac80211 STAs have a workaround for this, but it requires
access to internal cfg80211 data, see ieee80211_chswitch_work:
/* XXX: shouldn't really modify cfg80211-owned data! */
ifmgd->associated->channel = sdata->csa_chandef.chan;
This patch suggests to convert mac80211 workaround into cfg80211 behavior
and to update current bss channel in cfg80211_ch_switch_notify.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sugar Zhang [Wed, 3 Apr 2019 11:06:22 +0000 (19:06 +0800)]
dmaengine: pl330: _stop: clear interrupt status
[ Upstream commit
2da254cc7908105a60a6bb219d18e8dced03dcb9 ]
This patch kill instructs the DMAC to immediately terminate
execution of a thread. and then clear the interrupt status,
at last, stop generating interrupts for DMA_SEV. to guarantee
the next dma start is clean. otherwise, one interrupt maybe leave
to next start and make some mistake.
we can reporduce the problem as follows:
DMASEV: modify the event-interrupt resource, and if the INTEN sets
function as interrupt, the DMAC will set irq<event_num> HIGH to
generate interrupt. write INTCLR to clear interrupt.
DMA EXECUTING INSTRUCTS DMA TERMINATE
| |
| |
... _stop
| |
| spin_lock_irqsave
DMASEV |
| |
| mask INTEN
| |
| DMAKILL
| |
| spin_unlock_irqrestore
in above case, a interrupt was left, and if we unmask INTEN, the DMAC
will set irq<event_num> HIGH to generate interrupt.
to fix this, do as follows:
DMA EXECUTING INSTRUCTS DMA TERMINATE
| |
| |
... _stop
| |
| spin_lock_irqsave
DMASEV |
| |
| DMAKILL
| |
| clear INTCLR
| mask INTEN
| |
| spin_unlock_irqrestore
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 25 Apr 2019 16:25:54 +0000 (18:25 +0200)]
s390: qeth: address type mismatch warning
[ Upstream commit
46b83629dede262315aa82179d105581f11763b6 ]
clang produces a harmless warning for each use for the qeth_adp_supported
macro:
drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to
different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion]
if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported'
qeth_is_ipa_supported(&c->options.adp, f)
~~~~~~~~~~~~~~~~~~~~~ ^
Add a version of this macro that uses the correct types, and
remove the unused qeth_adp_enabled() macro that has the same
problem.
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mariusz Bialonczyk [Thu, 21 Mar 2019 10:52:55 +0000 (11:52 +0100)]
w1: fix the resume command API
[ Upstream commit
62909da8aca048ecf9fbd7e484e5100608f40a63 ]
>From the DS2408 datasheet [1]:
"Resume Command function checks the status of the RC flag and, if it is set,
directly transfers control to the control functions, similar to a Skip ROM
command. The only way to set the RC flag is through successfully executing
the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM
command"
The function currently works perfectly fine in a multidrop bus, but when we
have only a single slave connected, then only a Skip ROM is used and Match
ROM is not called at all. This is leading to problems e.g. with single one
DS2408 connected, as the Resume Command is not working properly and the
device is responding with failing results after the Resume Command.
This commit is fixing this by using a Skip ROM instead in those cases.
The bandwidth / performance advantage is exactly the same.
Refs:
[1] https://datasheets.maximintegrated.com/en/ds/DS2408.pdf
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Fri, 12 Apr 2019 04:26:13 +0000 (14:26 +1000)]
sched/nohz: Run NOHZ idle load balancer on HK_FLAG_MISC CPUs
[ Upstream commit
9b019acb72e4b5741d88e8936d6f200ed44b66b2 ]
The NOHZ idle balancer runs on the lowest idle CPU. This can
interfere with isolated CPUs, so confine it to HK_FLAG_MISC
housekeeping CPUs.
HK_FLAG_SCHED is not used for this because it is not set anywhere
at the moment. This could be folded into HK_FLAG_SCHED once that
option is fixed.
The problem was observed with increased jitter on an application
running on CPU0, caused by NOHZ idle load balancing being run on
CPU1 (an SMT sibling).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190412042613.28930-1-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Rudo [Mon, 1 Apr 2019 10:48:43 +0000 (12:48 +0200)]
s390/kexec_file: Fix detection of text segment in ELF loader
[ Upstream commit
729829d775c9a5217abc784b2f16087d79c4eec8 ]
To register data for the next kernel (command line, oldmem_base, etc.) the
current kernel needs to find the ELF segment that contains head.S. This is
currently done by checking ifor 'phdr->p_paddr == 0'. This works fine for
the current kernel build but in theory the first few pages could be
skipped. Make the detection more robust by checking if the entry point lies
within the segment.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manish Rangankar [Fri, 26 Apr 2019 10:55:45 +0000 (03:55 -0700)]
scsi: qedi: Abort ep termination if offload not scheduled
[ Upstream commit
f848bfd8e167210a29374e8a678892bed591684f ]
Sometimes during connection recovery when there is a failure to resolve
ARP, and offload connection was not issued, driver tries to flush pending
offload connection work which was not queued up.
kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0
kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11
kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018
kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0
kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1
f 84 00 00 00 00 00 0f 1f
kernel: RSP: 0018:
ffffa6b4054dba68 EFLAGS:
00010246
kernel: RAX:
0000000000000000 RBX:
ffff91df21c36fc0 RCX:
0000000000000000
kernel: RDX:
0000000000000001 RSI:
0000000000000000 RDI:
ffff91df21c36fc0
kernel: RBP:
ffff91df21c36ef0 R08:
0000000000000000 R09:
0000000000000000
kernel: R10:
0000000000000038 R11:
ffffa6b4054dbd60 R12:
ffffffffc05e72c0
kernel: R13:
ffff91db10280820 R14:
0000000000000048 R15:
0000000000000000
kernel: FS:
00007f5d83cc1740(0000) GS:
ffff91df2f840000(0000) knlGS:
0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
kernel: CR2:
0000000001cc5000 CR3:
0000000465450002 CR4:
00000000001606e0
kernel: Call Trace:
kernel: ? try_to_del_timer_sync+0x4d/0x80
kernel: qedi_ep_disconnect+0x3b/0x410 [qedi]
kernel: ? 0xffffffffc083c000
kernel: ? klist_iter_exit+0x14/0x20
kernel: ? class_find_device+0x93/0xf0
kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi]
kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi]
kernel: ? copyout+0x22/0x30
kernel: ? _copy_to_iter+0xa0/0x430
kernel: ? _cond_resched+0x15/0x30
kernel: ? __kmalloc_node_track_caller+0x1f9/0x270
kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi]
kernel: netlink_unicast+0x17f/0x230
kernel: netlink_sendmsg+0x2d2/0x3d0
kernel: sock_sendmsg+0x36/0x50
kernel: ___sys_sendmsg+0x280/0x2a0
kernel: ? timerqueue_add+0x54/0x80
kernel: ? enqueue_hrtimer+0x38/0x90
kernel: ? hrtimer_start_range_ns+0x19f/0x2c0
kernel: __sys_sendmsg+0x58/0xa0
kernel: do_syscall_64+0x5b/0x180
kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabien Dessenne [Wed, 24 Apr 2019 12:26:48 +0000 (14:26 +0200)]
rtc: stm32: manage the get_irq probe defer case
[ Upstream commit
cf612c5949aca2bd81a1e28688957c8149ea2693 ]
Manage the -EPROBE_DEFER error case for the wake IRQ.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Van Asbroeck [Fri, 26 Apr 2019 18:36:35 +0000 (14:36 -0400)]
rtc: 88pm860x: prevent use-after-free on device remove
[ Upstream commit
f22b1ba15ee5785aa028384ebf77dd39e8e47b70 ]
The device's remove() attempts to shut down the delayed_work scheduled
on the kernel-global workqueue by calling flush_scheduled_work().
Unfortunately, flush_scheduled_work() does not prevent the delayed_work
from re-scheduling itself. The delayed_work might run after the device
has been removed, and touch the already de-allocated info structure.
This is a potential use-after-free.
Fix by calling cancel_delayed_work_sync() during remove(): this ensures
that the delayed work is properly cancelled, is no longer running, and
is not able to re-schedule itself.
This issue was detected with the help of Coccinelle.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Tue, 5 Mar 2019 09:31:11 +0000 (10:31 +0100)]
iwlwifi: pcie: don't crash on invalid RX interrupt
[ Upstream commit
30f24eabab8cd801064c5c37589d803cb4341929 ]
If for some reason the device gives us an RX interrupt before we're
ready for it, perhaps during device power-on with misconfigured IRQ
causes mapping or so, we can crash trying to access the queues.
Prevent that by checking that we actually have RXQs and that they
were properly allocated.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qu Wenruo [Tue, 26 Feb 2019 08:33:56 +0000 (16:33 +0800)]
btrfs: Don't panic when we can't find a root key
[ Upstream commit
7ac1e464c4d473b517bb784f30d40da1f842482e ]
When we failed to find a root key in btrfs_update_root(), we just panic.
That's definitely not cool, fix it by outputting an unique error
message, aborting current transaction and return -EUCLEAN. This should
not normally happen as the root has been used by the callers in some
way.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josef Bacik [Mon, 25 Feb 2019 16:14:45 +0000 (11:14 -0500)]
btrfs: fix panic during relocation after ENOSPC before writeback happens
[ Upstream commit
ff612ba7849964b1898fd3ccd1f56941129c6aab ]
We've been seeing the following sporadically throughout our fleet
panic: kernel BUG at fs/btrfs/relocation.c:4584!
netversion: 5.0-0
Backtrace:
#0 [
ffffc90003adb880] machine_kexec at
ffffffff81041da8
#1 [
ffffc90003adb8c8] __crash_kexec at
ffffffff8110396c
#2 [
ffffc90003adb988] crash_kexec at
ffffffff811048ad
#3 [
ffffc90003adb9a0] oops_end at
ffffffff8101c19a
#4 [
ffffc90003adb9c0] do_trap at
ffffffff81019114
#5 [
ffffc90003adba00] do_error_trap at
ffffffff810195d0
#6 [
ffffc90003adbab0] invalid_op at
ffffffff81a00a9b
[exception RIP: btrfs_reloc_cow_block+692]
RIP:
ffffffff8143b614 RSP:
ffffc90003adbb68 RFLAGS:
00010246
RAX:
fffffffffffffff7 RBX:
ffff8806b9c32000 RCX:
ffff8806aad00690
RDX:
ffff880850b295e0 RSI:
ffff8806b9c32000 RDI:
ffff88084f205bd0
RBP:
ffff880849415000 R8:
ffffc90003adbbe0 R9:
ffff88085ac90000
R10:
ffff8805f7369140 R11:
0000000000000000 R12:
ffff880850b295e0
R13:
ffff88084f205bd0 R14:
0000000000000000 R15:
0000000000000000
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
#7 [
ffffc90003adbbb0] __btrfs_cow_block at
ffffffff813bf1cd
#8 [
ffffc90003adbc28] btrfs_cow_block at
ffffffff813bf4b3
#9 [
ffffc90003adbc78] btrfs_search_slot at
ffffffff813c2e6c
The way relocation moves data extents is by creating a reloc inode and
preallocating extents in this inode and then copying the data into these
preallocated extents. Once we've done this for all of our extents,
we'll write out these dirty pages, which marks the extent written, and
goes into btrfs_reloc_cow_block(). From here we get our current
reloc_control, which _should_ match the reloc_control for the current
block group we're relocating.
However if we get an ENOSPC in this path at some point we'll bail out,
never initiating writeback on this inode. Not a huge deal, unless we
happen to be doing relocation on a different block group, and this block
group is now rc->stage == UPDATE_DATA_PTRS. This trips the BUG_ON() in
btrfs_reloc_cow_block(), because we expect to be done modifying the data
inode. We are in fact done modifying the metadata for the data inode
we're currently using, but not the one from the failed block group, and
thus we BUG_ON().
(This happens when writeback finishes for extents from the previous
group, when we are at btrfs_finish_ordered_io() which updates the data
reloc tree (inode item, drops/adds extent items, etc).)
Fix this by writing out the reloc data inode always, and then breaking
out of the loop after that point to keep from tripping this BUG_ON()
later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ add note from Filipe ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robbie Ko [Tue, 26 Mar 2019 03:56:11 +0000 (11:56 +0800)]
Btrfs: fix data bytes_may_use underflow with fallocate due to failed quota reserve
[ Upstream commit
39ad317315887c2cb9a4347a93a8859326ddf136 ]
When doing fallocate, we first add the range to the reserve_list and
then reserve the quota. If quota reservation fails, we'll release all
reserved parts of reserve_list.
However, cur_offset is not updated to indicate that this range is
already been inserted into the list. Therefore, the same range is freed
twice. Once at list_for_each_entry loop, and once at the end of the
function. This will result in WARN_ON on bytes_may_use when we free the
remaining space.
At the end, under the 'out' label we have a call to:
btrfs_free_reserved_data_space(inode, data_reserved, alloc_start, alloc_end - cur_offset);
The start offset, third argument, should be cur_offset.
Everything from alloc_start to cur_offset was freed by the
list_for_each_entry_safe_loop.
Fixes:
18513091af94 ("btrfs: update btrfs_space_info's bytes_may_use timely")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nadav Amit [Fri, 26 Apr 2019 00:11:31 +0000 (17:11 -0700)]
x86/modules: Avoid breaking W^X while loading modules
[ Upstream commit
f2c65fb3221adc6b73b0549fc7ba892022db9797 ]
When modules and BPF filters are loaded, there is a time window in
which some memory is both writable and executable. An attacker that has
already found another vulnerability (e.g., a dangling pointer) might be
able to exploit this behavior to overwrite kernel code. Prevent having
writable executable PTEs in this stage.
In addition, avoiding having W+X mappings can also slightly simplify the
patching of modules code on initialization (e.g., by alternatives and
static-key), as would be done in the next patch. This was actually the
main motivation for this patch.
To avoid having W+X mappings, set them initially as RW (NX) and after
they are set as RO set them as X as well. Setting them as executable is
done as a separate step to avoid one core in which the old PTE is cached
(hence writable), and another which sees the updated PTE (executable),
which would break the W^X protection.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lkml.kernel.org/r/20190426001143.4983-12-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Wed, 17 Apr 2019 21:44:41 +0000 (14:44 -0700)]
scsi: qla2xxx: Fix hardirq-unsafe locking
[ Upstream commit
300ec7415c1fed5c73660f50c8e14a67e236dc0a ]
Since fc_remote_port_delete() must be called with interrupts enabled, do
not disable interrupts when calling that function. Remove the lockin calls
from around the put_sess() call. This is safe because the function that is
called when the final reference is dropped, qlt_unreg_sess(), grabs the
proper locks. This patch avoids that lockdep reports the following:
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
kworker/2:1/62 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
0000000009e679b3 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0
and this task is already holding:
00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]
which would create a new lock dependency:
(&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&(&ha->tgt.sess_lock)->rlock){-...}
... which became HARDIRQ-irq-safe at:
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
__handle_irq_event_percpu+0x79/0x3c0
handle_irq_event_percpu+0x70/0xf0
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x12c/0x310
handle_irq+0x192/0x20a
do_IRQ+0x73/0x160
ret_from_intr+0x0/0x1d
default_idle+0x23/0x1f0
arch_cpu_idle+0x15/0x20
default_idle_call+0x35/0x40
do_idle+0x2bb/0x2e0
cpu_startup_entry+0x1d/0x20
start_secondary+0x2a8/0x320
secondary_startup_64+0xa4/0xb0
to a HARDIRQ-irq-unsafe lock:
(&(&k->k_lock)->rlock){+.+.}
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0xe3/0x200
_raw_spin_lock+0x32/0x50
klist_add_tail+0x33/0xb0
device_add+0x7e1/0xb50
device_create_groups_vargs+0x11c/0x150
device_create_with_groups+0x89/0xb0
vtconsole_class_init+0xb2/0x124
do_one_initcall+0xc5/0x3ce
kernel_init_freeable+0x295/0x32e
kernel_init+0x11/0x11b
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&k->k_lock)->rlock);
local_irq_disable();
lock(&(&ha->tgt.sess_lock)->rlock);
lock(&(&k->k_lock)->rlock);
<Interrupt>
lock(&(&ha->tgt.sess_lock)->rlock);
*** DEADLOCK ***
3 locks held by kworker/2:1/62:
#0:
00000000a4319c16 ((wq_completion)"qla2xxx_wq"){+.+.}, at: process_one_work+0x437/0xa80
#1:
00000000ffa34c42 ((work_completion)(&sess->del_work)){+.+.}, at: process_one_work+0x437/0xa80
#2:
00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]
the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 8 {
IN-HARDIRQ-W at:
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
__handle_irq_event_percpu+0x79/0x3c0
handle_irq_event_percpu+0x70/0xf0
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x12c/0x310
handle_irq+0x192/0x20a
do_IRQ+0x73/0x160
ret_from_intr+0x0/0x1d
default_idle+0x23/0x1f0
arch_cpu_idle+0x15/0x20
default_idle_call+0x35/0x40
do_idle+0x2bb/0x2e0
cpu_startup_entry+0x1d/0x20
start_secondary+0x2a8/0x320
secondary_startup_64+0xa4/0xb0
INITIAL USE at:
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
__handle_irq_event_percpu+0x79/0x3c0
handle_irq_event_percpu+0x70/0xf0
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x12c/0x310
handle_irq+0x192/0x20a
do_IRQ+0x73/0x160
ret_from_intr+0x0/0x1d
default_idle+0x23/0x1f0
arch_cpu_idle+0x15/0x20
default_idle_call+0x35/0x40
do_idle+0x2bb/0x2e0
cpu_startup_entry+0x1d/0x20
start_secondary+0x2a8/0x320
secondary_startup_64+0xa4/0xb0
}
... key at: [<
ffffffffa0c0d080>] __key.85462+0x0/0xfffffffffff7df80 [qla2xxx_scst]
... acquired at:
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
klist_next+0x43/0x1d0
device_for_each_child+0x96/0x110
scsi_target_block+0x3c/0x40 [scsi_mod]
fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
process_one_work+0x511/0xa80
worker_thread+0x67/0x5b0
kthread+0x1d2/0x1f0
ret_from_fork+0x3a/0x50
the dependencies between the lock to be acquired
and HARDIRQ-irq-unsafe lock:
-> (&(&k->k_lock)->rlock){+.+.} ops: 13831 {
HARDIRQ-ON-W at:
lock_acquire+0xe3/0x200
_raw_spin_lock+0x32/0x50
klist_add_tail+0x33/0xb0
device_add+0x7e1/0xb50
device_create_groups_vargs+0x11c/0x150
device_create_with_groups+0x89/0xb0
vtconsole_class_init+0xb2/0x124
do_one_initcall+0xc5/0x3ce
kernel_init_freeable+0x295/0x32e
kernel_init+0x11/0x11b
ret_from_fork+0x3a/0x50
SOFTIRQ-ON-W at:
lock_acquire+0xe3/0x200
_raw_spin_lock+0x32/0x50
klist_add_tail+0x33/0xb0
device_add+0x7e1/0xb50
device_create_groups_vargs+0x11c/0x150
device_create_with_groups+0x89/0xb0
vtconsole_class_init+0xb2/0x124
do_one_initcall+0xc5/0x3ce
kernel_init_freeable+0x295/0x32e
kernel_init+0x11/0x11b
ret_from_fork+0x3a/0x50
INITIAL USE at:
lock_acquire+0xe3/0x200
_raw_spin_lock+0x32/0x50
klist_add_tail+0x33/0xb0
device_add+0x7e1/0xb50
device_create_groups_vargs+0x11c/0x150
device_create_with_groups+0x89/0xb0
vtconsole_class_init+0xb2/0x124
do_one_initcall+0xc5/0x3ce
kernel_init_freeable+0x295/0x32e
kernel_init+0x11/0x11b
ret_from_fork+0x3a/0x50
}
... key at: [<
ffffffff83ed8780>] __key.15491+0x0/0x40
... acquired at:
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
klist_next+0x43/0x1d0
device_for_each_child+0x96/0x110
scsi_target_block+0x3c/0x40 [scsi_mod]
fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
process_one_work+0x511/0xa80
worker_thread+0x67/0x5b0
kthread+0x1d2/0x1f0
ret_from_fork+0x3a/0x50
stack backtrace:
CPU: 2 PID: 62 Comm: kworker/2:1 Tainted: G O 5.0.7-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: qla2xxx_wq qla24xx_delete_sess_fn [qla2xxx_scst]
Call Trace:
dump_stack+0x86/0xca
check_usage.cold.52+0x473/0x563
__lock_acquire+0x11c0/0x23e0
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
klist_next+0x43/0x1d0
device_for_each_child+0x96/0x110
scsi_target_block+0x3c/0x40 [scsi_mod]
fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
process_one_work+0x511/0xa80
worker_thread+0x67/0x5b0
kthread+0x1d2/0x1f0
ret_from_fork+0x3a/0x50
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Wed, 17 Apr 2019 21:44:43 +0000 (14:44 -0700)]
scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()
[ Upstream commit
d4023db71108375e4194e92730ba0d32d7f07813 ]
This patch avoids that lockdep reports the following warning:
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
5.1.0-rc1-dbg+ #11 Tainted: G W
-----------------------------------------------------
rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0
and this task is already holding:
00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]
which would create a new lock dependency:
(&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&(&ha->tgt.sess_lock)->rlock){-...}
... which became HARDIRQ-irq-safe at:
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
__handle_irq_event_percpu+0x79/0x3c0
handle_irq_event_percpu+0x70/0xf0
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x12c/0x310
handle_irq+0x192/0x20a
do_IRQ+0x73/0x160
ret_from_intr+0x0/0x1d
default_idle+0x23/0x1f0
arch_cpu_idle+0x15/0x20
default_idle_call+0x35/0x40
do_idle+0x2bb/0x2e0
cpu_startup_entry+0x1d/0x20
start_secondary+0x24d/0x2d0
secondary_startup_64+0xa4/0xb0
to a HARDIRQ-irq-unsafe lock:
(&(&k->k_lock)->rlock){+.+.}
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0xe3/0x200
_raw_spin_lock+0x32/0x50
klist_add_tail+0x33/0xb0
device_add+0x7f4/0xb60
device_create_groups_vargs+0x11c/0x150
device_create_with_groups+0x89/0xb0
vtconsole_class_init+0xb2/0x124
do_one_initcall+0xc5/0x3ce
kernel_init_freeable+0x295/0x32e
kernel_init+0x11/0x11b
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&k->k_lock)->rlock);
local_irq_disable();
lock(&(&ha->tgt.sess_lock)->rlock);
lock(&(&k->k_lock)->rlock);
<Interrupt>
lock(&(&ha->tgt.sess_lock)->rlock);
*** DEADLOCK ***
4 locks held by rmdir/1478:
#0:
000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70
#1:
00000000c85eb147 (&default_group_class[depth - 1]#2/1){+.+.}, at: do_rmdir+0x217/0x2d0
#2:
000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0
#3:
00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]
the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 {
IN-HARDIRQ-W at:
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
__handle_irq_event_percpu+0x79/0x3c0
handle_irq_event_percpu+0x70/0xf0
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x12c/0x310
handle_irq+0x192/0x20a
do_IRQ+0x73/0x160
ret_from_intr+0x0/0x1d
default_idle+0x23/0x1f0
arch_cpu_idle+0x15/0x20
default_idle_call+0x35/0x40
do_idle+0x2bb/0x2e0
cpu_startup_entry+0x1d/0x20
start_secondary+0x24d/0x2d0
secondary_startup_64+0xa4/0xb0
INITIAL USE at:
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx]
qla2x00_do_dpc+0xcee/0xf30 [qla2xxx]
kthread+0x1d2/0x1f0
ret_from_fork+0x3a/0x50
}
... key at: [<
ffffffffa125f700>] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx]
... acquired at:
__lock_acquire+0x11ed/0x1b60
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
klist_next+0x43/0x1d0
device_for_each_child+0x96/0x110
scsi_target_block+0x3c/0x40 [scsi_mod]
fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
target_shutdown_sessions+0x17b/0x190 [target_core_mod]
core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
config_item_release+0x9f/0x120 [configfs]
config_item_put+0x29/0x2b [configfs]
configfs_rmdir+0x3d2/0x520 [configfs]
vfs_rmdir+0xb3/0x1d0
do_rmdir+0x25c/0x2d0
__x64_sys_rmdir+0x24/0x30
do_syscall_64+0x77/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
the dependencies between the lock to be acquired
and HARDIRQ-irq-unsafe lock:
-> (&(&k->k_lock)->rlock){+.+.} ops: 14568 {
HARDIRQ-ON-W at:
lock_acquire+0xe3/0x200
_raw_spin_lock+0x32/0x50
klist_add_tail+0x33/0xb0
device_add+0x7f4/0xb60
device_create_groups_vargs+0x11c/0x150
device_create_with_groups+0x89/0xb0
vtconsole_class_init+0xb2/0x124
do_one_initcall+0xc5/0x3ce
kernel_init_freeable+0x295/0x32e
kernel_init+0x11/0x11b
ret_from_fork+0x3a/0x50
SOFTIRQ-ON-W at:
lock_acquire+0xe3/0x200
_raw_spin_lock+0x32/0x50
klist_add_tail+0x33/0xb0
device_add+0x7f4/0xb60
device_create_groups_vargs+0x11c/0x150
device_create_with_groups+0x89/0xb0
vtconsole_class_init+0xb2/0x124
do_one_initcall+0xc5/0x3ce
kernel_init_freeable+0x295/0x32e
kernel_init+0x11/0x11b
ret_from_fork+0x3a/0x50
INITIAL USE at:
lock_acquire+0xe3/0x200
_raw_spin_lock+0x32/0x50
klist_add_tail+0x33/0xb0
device_add+0x7f4/0xb60
device_create_groups_vargs+0x11c/0x150
device_create_with_groups+0x89/0xb0
vtconsole_class_init+0xb2/0x124
do_one_initcall+0xc5/0x3ce
kernel_init_freeable+0x295/0x32e
kernel_init+0x11/0x11b
ret_from_fork+0x3a/0x50
}
... key at: [<
ffffffff83f3d900>] __key.15805+0x0/0x40
... acquired at:
__lock_acquire+0x11ed/0x1b60
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
klist_next+0x43/0x1d0
device_for_each_child+0x96/0x110
scsi_target_block+0x3c/0x40 [scsi_mod]
fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
target_shutdown_sessions+0x17b/0x190 [target_core_mod]
core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
config_item_release+0x9f/0x120 [configfs]
config_item_put+0x29/0x2b [configfs]
configfs_rmdir+0x3d2/0x520 [configfs]
vfs_rmdir+0xb3/0x1d0
do_rmdir+0x25c/0x2d0
__x64_sys_rmdir+0x24/0x30
do_syscall_64+0x77/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
stack backtrace:
CPU: 7 PID: 1478 Comm: rmdir Tainted: G W 5.1.0-rc1-dbg+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x86/0xca
check_usage.cold.59+0x473/0x563
check_prev_add.constprop.43+0x1f1/0x1170
__lock_acquire+0x11ed/0x1b60
lock_acquire+0xe3/0x200
_raw_spin_lock_irqsave+0x3d/0x60
klist_next+0x43/0x1d0
device_for_each_child+0x96/0x110
scsi_target_block+0x3c/0x40 [scsi_mod]
fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
target_shutdown_sessions+0x17b/0x190 [target_core_mod]
core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
config_item_release+0x9f/0x120 [configfs]
config_item_put+0x29/0x2b [configfs]
configfs_rmdir+0x3d2/0x520 [configfs]
vfs_rmdir+0xb3/0x1d0
do_rmdir+0x25c/0x2d0
__x64_sys_rmdir+0x24/0x30
do_syscall_64+0x77/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Wed, 17 Apr 2019 21:44:28 +0000 (14:44 -0700)]
scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()
[ Upstream commit
e209783d66bca04b5fce4429e59338517ffc1a0b ]
Implementations of the .write_pending() callback functions must guarantee
that an appropriate LIO core callback function will be called immediately or
at a later time. Make sure that this guarantee is met for aborted SCSI
commands.
[mkp: typo]
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Fixes:
694833ee00c4 ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13.
Fixes:
a07100e00ac4 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Wed, 17 Apr 2019 21:44:24 +0000 (14:44 -0700)]
scsi: qla2xxx: Fix a qla24xx_enable_msix() error path
[ Upstream commit
24afabdbd0b3553963a2bbf465895492b14d1107 ]
Make sure that the allocated interrupts are freed if allocating memory for
the msix_entries array fails.
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Viresh Kumar [Tue, 30 Apr 2019 06:05:52 +0000 (11:35 +0530)]
sched/cpufreq: Fix kobject memleak
[ Upstream commit
9a4f26cc98d81b67ecc23b890c28e2df324e29f3 ]
Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.
Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20190430001144.24890-1-tobin@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Tue, 9 Apr 2019 04:40:05 +0000 (14:40 +1000)]
powerpc/watchdog: Use hrtimers for per-CPU heartbeat
[ Upstream commit
7ae3f6e130e8dc6188b59e3b4ebc2f16e9c8d053 ]
Using a jiffies timer creates a dependency on the tick_do_timer_cpu
incrementing jiffies. If that CPU has locked up and jiffies is not
incrementing, the watchdog heartbeat timer for all CPUs stops and
creates false positives and confusing warnings on local CPUs, and
also causes the SMP detector to stop, so the root cause is never
detected.
Fix this by using hrtimer based timers for the watchdog heartbeat,
like the generic kernel hardlockup detector.
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reported-by: Ravikumar Bangoria <ravi.bangoria@in.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Mon, 29 Apr 2019 17:37:01 +0000 (13:37 -0400)]
arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
[ Upstream commit
74dd022f9e6260c3b5b8d15901d27ebcc5f21eda ]
When building with -Wunused-but-set-variable, the compiler shouts about
a number of pte_unmap() users, since this expands to an empty macro on
arm64:
| mm/gup.c: In function 'gup_pte_range':
| mm/gup.c:1727:16: warning: variable 'ptem' set but not used
| [-Wunused-but-set-variable]
| mm/gup.c: At top level:
| mm/memory.c: In function 'copy_pte_range':
| mm/memory.c:821:24: warning: variable 'orig_dst_pte' set but not used
| [-Wunused-but-set-variable]
| mm/memory.c:821:9: warning: variable 'orig_src_pte' set but not used
| [-Wunused-but-set-variable]
| mm/swap_state.c: In function 'swap_ra_info':
| mm/swap_state.c:641:15: warning: variable 'orig_pte' set but not used
| [-Wunused-but-set-variable]
| mm/madvise.c: In function 'madvise_free_pte_range':
| mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used
| [-Wunused-but-set-variable]
Rewrite pte_unmap() as a static inline function, which silences the
warnings.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Zyngier [Mon, 8 Apr 2019 15:49:01 +0000 (16:49 +0100)]
ARM: vdso: Remove dependency with the arch_timer driver internals
[ Upstream commit
1f5b62f09f6b314c8d70b9de5182dae4de1f94da ]
The VDSO code uses the kernel helper that was originally designed
to abstract the access between 32 and 64bit systems. It worked so
far because this function is declared as 'inline'.
As we're about to revamp that part of the code, the VDSO would
break. Let's fix it by doing what should have been done from
the start, a proper system register access.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabien Dessenne [Wed, 24 Apr 2019 13:25:44 +0000 (09:25 -0400)]
media: stm32-dcmi: return appropriate error codes during probe
[ Upstream commit
b5b5a27bee5884860798ffd0f08e611a3942064b ]
During probe, return the provided errors value instead of -ENODEV.
This allows the driver to be deferred probed if needed.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jon Derrick [Sat, 16 Mar 2019 00:05:16 +0000 (18:05 -0600)]
drm/nouveau/bar/nv50: ensure BAR is mapped
[ Upstream commit
f10b83de1fd49216a4c657816f48001437e4bdd5 ]
If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Tue, 30 Apr 2019 15:52:29 +0000 (10:52 -0500)]
ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()
[ Upstream commit
23583f7795025e3c783b680d906509366b0906ad ]
When the DSDT tables expose devices with subdevices and a set of
hierarchical _DSD properties, the data returned by
acpi_get_next_subnode() is incorrect, with the results suggesting a bad
pointer assignment. The parser works fine with device_nodes or
data_nodes, but not with a combination of the two.
The problem is traced to an invalid pointer used when jumping from
handling device_nodes to data nodes. The existing code looks for data
nodes below the last subdevice found instead of the common root. Fix
by forcing the acpi_device pointer to be derived from the same fwnode
for the two types of subnodes.
This same problem of handling device and data nodes was already fixed
in a similar way by 'commit
bf4703fdd166 ("ACPI / property: fix data
node parsing in acpi_get_next_subnode()")' but broken later by 'commit
34055190b19 ("ACPI / property: Add fwnode_get_next_child_node()")', so
this should probably go to linux-stable all the way to 4.12
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 24 Apr 2019 09:52:18 +0000 (12:52 +0300)]
brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
[ Upstream commit
e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d ]
If "ret_len" is negative then it could lead to a NULL dereference.
The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer. Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd(). We memcpy() to and
from the buffer so it would result in a NULL dereference.
The fix is to change the types so that "ret_len" can't be negative. (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).
Fixes:
1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Flavio Suligoi [Fri, 12 Apr 2019 07:32:19 +0000 (09:32 +0200)]
spi: pxa2xx: fix SCR (divisor) calculation
[ Upstream commit
29f2133717c527f492933b0622a4aafe0b3cbe9e ]
Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.
When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.
For example, with:
- ssp_clk = 50 MHz
- dev freq = 15 MHz
without this patch the SSP clock will be greater than 15 MHz:
- 25 MHz for PXA25x_SSP and CE4100_SSP
- 16,56 MHz for the others
Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 16 Apr 2019 13:12:23 +0000 (15:12 +0200)]
ASoC: imx: fix fiq dependencies
[ Upstream commit
ea751227c813ab833609afecfeedaf0aa26f327e ]
During randconfig builds, I occasionally run into an invalid configuration
of the freescale FIQ sound support:
WARNING: unmet direct dependencies detected for SND_SOC_IMX_PCM_FIQ
Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]
Selected by [y]:
- SND_SOC_FSL_SPDIF [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]!=n && (MXC_TZIC [=n] || MXC_AVIC [=y])
sound/soc/fsl/imx-ssi.o: In function `imx_ssi_remove':
imx-ssi.c:(.text+0x28): undefined reference to `imx_pcm_fiq_exit'
sound/soc/fsl/imx-ssi.o: In function `imx_ssi_probe':
imx-ssi.c:(.text+0xa64): undefined reference to `imx_pcm_fiq_init'
The Kconfig warning is a result of the symbol being defined inside of
the "if SND_IMX_SOC" block, and is otherwise harmless. The link error
is more tricky and happens with SND_SOC_IMX_SSI=y, which may or may not
imply FIQ support. However, if SND_SOC_FSL_SSI is set to =m at the same
time, that selects SND_SOC_IMX_PCM_FIQ as a loadable module dependency,
which then causes a link failure from imx-ssi.
The solution here is to make SND_SOC_IMX_PCM_FIQ built-in whenever
one of its potential users is built-in.
Fixes:
ff40260f79dc ("ASoC: fsl: refine DMA/FIQ dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anju T Sudhakar [Tue, 18 Dec 2018 06:20:41 +0000 (11:50 +0530)]
powerpc/perf: Fix loop exit condition in nest_imc_event_init
[ Upstream commit
860b7d2286236170a36f94946d03ca9888d32571 ]
The data structure (i.e struct imc_mem_info) to hold the memory address
information for nest imc units is allocated based on the number of nodes
in the system.
nest_imc_event_init() traverse this struct array to calculate the memory
base address for the event-cpu. If we fail to find a match for the event
cpu's chip-id in imc_mem_info struct array, then the do-while loop will
iterate until we crash.
Fix this by changing the loop exit condition based on the number of
non zero vbase elements in the array, since the allocation is done for
nr_chips + 1.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bo YU [Tue, 30 Oct 2018 13:21:55 +0000 (09:21 -0400)]
powerpc/boot: Fix missing check of lseek() return value
[ Upstream commit
5d085ec04a000fefb5182d3b03ee46ca96d8389b ]
This is detected by Coverity scan: CID: 1440481
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anju T Sudhakar [Tue, 27 Nov 2018 08:24:52 +0000 (13:54 +0530)]
powerpc/perf: Return accordingly on invalid chip-id in
[ Upstream commit
a913e5e8b43be1d3897a141ce61c1ec071cad89c ]
Nest hardware counter memory resides in a per-chip reserve-memory.
During nest_imc_event_init(), chip-id of the event-cpu is considered to
calculate the base memory addresss for that cpu. Return, proper error
condition if the chip_id calculated is invalid.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jerome Brunet [Mon, 29 Apr 2019 13:29:39 +0000 (15:29 +0200)]
ASoC: hdmi-codec: unlock the device on startup errors
[ Upstream commit
30180e8436046344b12813dc954b2e01dfdcd22d ]
If the hdmi codec startup fails, it should clear the current_substream
pointer to free the device. This is properly done for the audio_startup()
callback but for snd_pcm_hw_constraint_eld().
Make sure the pointer cleared if an error is reported.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Wed, 27 Mar 2019 09:56:08 +0000 (10:56 +0100)]
usb: dwc3: move synchronize_irq() out of the spinlock protected block
[ Upstream commit
41a91c606e7d2b74358a944525267cc451c271e8 ]
dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context
calling synchronize_irq() is not allowed. Move the problematic call out
of the protected block to fix the following kernel BUG during system
suspend:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:112
in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake
6 locks held by rtcwake/1601:
#0:
f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c
#1:
b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4
#2:
7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4
#3:
8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04
#4:
fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c
#5:
4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c
irq event stamp: 11252
hardirqs last enabled at (11251): [<
c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74
hardirqs last disabled at (11252): [<
c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c
softirqs last enabled at (9744): [<
c0102564>] __do_softirq+0x3a4/0x66c
softirqs last disabled at (9737): [<
c0128528>] irq_exit+0x140/0x168
Preemption disabled at:
[<
00000000>] (null)
CPU: 7 PID: 1601 Comm: rtcwake Not tainted
5.0.0-rc3-next-
20190122-00039-ga3f4ee4f8a52 #5252
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<
c01110f0>] (unwind_backtrace) from [<
c010d120>] (show_stack+0x10/0x14)
[<
c010d120>] (show_stack) from [<
c09a4d04>] (dump_stack+0x90/0xc8)
[<
c09a4d04>] (dump_stack) from [<
c014c700>] (___might_sleep+0x22c/0x2c8)
[<
c014c700>] (___might_sleep) from [<
c0189d68>] (synchronize_irq+0x28/0x84)
[<
c0189d68>] (synchronize_irq) from [<
c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c)
[<
c05cbbf8>] (dwc3_gadget_suspend) from [<
c05bd020>] (dwc3_suspend_common+0x154/0x410)
[<
c05bd020>] (dwc3_suspend_common) from [<
c05bd34c>] (dwc3_suspend+0x14/0x2c)
[<
c05bd34c>] (dwc3_suspend) from [<
c051c730>] (platform_pm_suspend+0x2c/0x54)
[<
c051c730>] (platform_pm_suspend) from [<
c05285d4>] (dpm_run_callback+0xa4/0x3dc)
[<
c05285d4>] (dpm_run_callback) from [<
c0528a40>] (__device_suspend+0x134/0x74c)
[<
c0528a40>] (__device_suspend) from [<
c052c508>] (dpm_suspend+0x174/0x588)
[<
c052c508>] (dpm_suspend) from [<
c0182134>] (suspend_devices_and_enter+0xc0/0xe74)
[<
c0182134>] (suspend_devices_and_enter) from [<
c0183658>] (pm_suspend+0x770/0xc04)
[<
c0183658>] (pm_suspend) from [<
c0180ddc>] (state_store+0x6c/0xcc)
[<
c0180ddc>] (state_store) from [<
c09a9a70>] (kobj_attr_store+0x14/0x20)
[<
c09a9a70>] (kobj_attr_store) from [<
c02d6800>] (sysfs_kf_write+0x4c/0x50)
[<
c02d6800>] (sysfs_kf_write) from [<
c02d594c>] (kernfs_fop_write+0xfc/0x1e4)
[<
c02d594c>] (kernfs_fop_write) from [<
c02593d8>] (__vfs_write+0x2c/0x160)
[<
c02593d8>] (__vfs_write) from [<
c0259694>] (vfs_write+0xa4/0x16c)
[<
c0259694>] (vfs_write) from [<
c0259870>] (ksys_write+0x40/0x8c)
[<
c0259870>] (ksys_write) from [<
c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed55ffa8 to 0xed55fff0)
...
Fixes:
01c10880d242 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minas Harutyunyan [Mon, 18 Mar 2019 10:24:30 +0000 (14:24 +0400)]
usb: dwc2: gadget: Increase descriptors count for ISOC's
[ Upstream commit
54f37f56631747075f1f9a2f0edf6ba405e3e66c ]
Some function drivers queueing more than 128 ISOC requests at a time.
To avoid "descriptor chain full" cases, increasing descriptors count
from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's
only.
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mac Chiang [Thu, 2 May 2019 06:12:04 +0000 (14:12 +0800)]
ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE
[ Upstream commit
16ec5dfe0327ddcf279957bffe4c8fe527088c63 ]
On kbl_rt5663_max98927, commit
38a5882e4292
("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE")
This key pair mapping to play/pause when playing Youtube
The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.
For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.
Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec
The same fix is required on Chrome kbl_da7219_max98357a.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Fri, 12 Apr 2019 06:02:23 +0000 (14:02 +0800)]
pinctrl: zte: fix leaked of_node references
[ Upstream commit
02d15f0d80720545f1f4922a1550ea4aaad4e152 ]
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
João Paulo Rechi Vita [Thu, 2 May 2019 02:01:52 +0000 (10:01 +0800)]
Bluetooth: Ignore CC events not matching the last HCI command
[ Upstream commit
f80c5dad7b6467b884c445ffea45985793b4b2d0 ]
This commit makes the kernel not send the next queued HCI command until
a command complete arrives for the last HCI command sent to the
controller. This change avoids a problem with some buggy controllers
(seen on two SKUs of QCA9377) that send an extra command complete event
for the previous command after the kernel had already sent a new HCI
command to the controller.
The problem was reproduced when starting an active scanning procedure,
where an extra command complete event arrives for the LE_SET_RANDOM_ADDR
command. When this happends the kernel ends up not processing the
command complete for the following commmand, LE_SET_SCAN_PARAM, and
ultimately behaving as if a passive scanning procedure was being
performed, when in fact controller is performing an active scanning
procedure. This makes it impossible to discover BLE devices as no device
found events are sent to userspace.
This problem is reproducible on 100% of the attempts on the affected
controllers. The extra command complete event can be seen at timestamp
27.420131 on the btmon logs bellow.
Bluetooth monitor ver 5.50
= Note: Linux version 5.0.0+ (x86_64) 0.352340
= Note: Bluetooth subsystem version 2.22 0.352343
= New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344
= Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345
= Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346
@ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347
@ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366
@ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164
@ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310
Address type: 0x06
LE Public
LE Random
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496
Address: 15:60:F2:91:B2:24 (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
Own address type: Random (0x01)
Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059
Start Discovery (0x0023) plen 1
Status: Success (0x00)
Address type: 0x06
LE Public
LE Random
@ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067
Address type: 0x06
LE Public
LE Random
Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067
Address type: 0x06
LE Public
LE Random
Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067
Address type: 0x06
LE Public
LE Random
Discovery: Enabled (0x01)
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haiyang Zhang [Tue, 30 Apr 2019 19:29:07 +0000 (19:29 +0000)]
hv_netvsc: fix race that may miss tx queue wakeup
[ Upstream commit
93aa4792c3908eac87ddd368ee0fe0564148232b ]
When the ring buffer is almost full due to RX completion messages, a
TX packet may reach the "low watermark" and cause the queue stopped.
If the TX completion arrives earlier than queue stopping, the wakeup
may be missed.
This patch moves the check for the last pending packet to cover both
EAGAIN and success cases, so the queue will be reliably waked up when
necessary.
Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sameeh Jubran [Wed, 1 May 2019 13:47:10 +0000 (16:47 +0300)]
net: ena: gcc 8: fix compilation warning
[ Upstream commit
f913308879bc6ae437ce64d878c7b05643ddea44 ]
GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.
In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.
This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:
https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sameer Pujar [Thu, 2 May 2019 12:55:16 +0000 (18:25 +0530)]
dmaengine: tegra210-dma: free dma controller in remove()
[ Upstream commit
f030e419501cb95e961e9ed35c493b5d46a04eca ]
Following kernel panic is seen during DMA driver unload->load sequence
==========================================================================
Unable to handle kernel paging request at virtual address
ffffff8001198880
Internal error: Oops:
86000007 [#1] PREEMPT SMP
CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f
Hardware name: galen (DT)
task:
ffffffc3590d1a80 task.stack:
ffffffc3d0678000
PC is at 0xffffff8001198880
LR is at of_dma_request_slave_channel+0xd8/0x1f8
pc : [<
ffffff8001198880>] lr : [<
ffffff8008746f30>] pstate:
60400045
sp :
ffffffc3d067b710
x29:
ffffffc3d067b710 x28:
000000000000002f
x27:
ffffff800949e000 x26:
ffffff800949e750
x25:
ffffff800949e000 x24:
ffffffbefe817d84
x23:
ffffff8009f77cb0 x22:
0000000000000028
x21:
ffffffc3ffda49c8 x20:
0000000000000029
x19:
0000000000000001 x18:
ffffffffffffffff
x17:
0000000000000000 x16:
ffffff80082b66a0
x15:
ffffff8009e78250 x14:
000000000000000a
x13:
0000000000000038 x12:
0101010101010101
x11:
0000000000000030 x10:
0101010101010101
x9 :
fffffffffffffffc x8 :
7f7f7f7f7f7f7f7f
x7 :
62ff726b6b64622c x6 :
0000000000008064
x5 :
6400000000000000 x4 :
ffffffbefe817c44
x3 :
ffffffc3ffda3e08 x2 :
ffffff8001198880
x1 :
ffffffc3d48323c0 x0 :
ffffffc3d067b788
Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028)
Call trace:
[<
ffffff8001198880>] 0xffffff8001198880
[<
ffffff80087459f8>] dma_request_chan+0x50/0x1f0
[<
ffffff8008745bc0>] dma_request_slave_channel+0x28/0x40
[<
ffffff8001552c44>] tegra_alt_pcm_open+0x114/0x170
[<
ffffff8008d65fa4>] soc_pcm_open+0x10c/0x878
[<
ffffff8008d18618>] snd_pcm_open_substream+0xc0/0x170
[<
ffffff8008d1878c>] snd_pcm_open+0xc4/0x240
[<
ffffff8008d189e0>] snd_pcm_playback_open+0x58/0x80
[<
ffffff8008cfc6d4>] snd_open+0xb4/0x178
[<
ffffff8008250628>] chrdev_open+0xb8/0x1d0
[<
ffffff8008246fdc>] do_dentry_open+0x214/0x318
[<
ffffff80082485d0>] vfs_open+0x58/0x88
[<
ffffff800825bce0>] do_last+0x450/0xde0
[<
ffffff800825c718>] path_openat+0xa8/0x368
[<
ffffff800825dd84>] do_filp_open+0x8c/0x110
[<
ffffff8008248a74>] do_sys_open+0x164/0x220
[<
ffffff80082b66dc>] compat_SyS_openat+0x3c/0x50
[<
ffffff8008083040>] el0_svc_naked+0x34/0x38
---[ end trace
67e6d544e65b5145 ]---
Kernel panic - not syncing: Fatal exception
==========================================================================
In device probe(), of_dma_controller_register() registers DMA controller.
But when driver is removed, this is not freed. During driver reload this
results in data abort and kernel panic. Add of_dma_controller_free() in
driver remove path to fix the issue.
Fixes:
f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Wed, 1 May 2019 13:45:59 +0000 (22:45 +0900)]
bpftool: exclude bash-completion/bpftool from .gitignore pattern
[ Upstream commit
a7d006714724de4334c5e3548701b33f7b12ca96 ]
tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:
tools/bpf/bpftool/bpftool
However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.
So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:
tools/bpf/bpftool/bash-completion/bpftool
As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.
However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.
For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.
So, I believe it is better to fix this issue.
You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yonghong Song [Mon, 29 Apr 2019 23:59:38 +0000 (16:59 -0700)]
selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c
[ Upstream commit
6cea33701eb024bc6c920ab83940ee22afd29139 ]
Test test_libbpf.sh failed on my development server with failure
-bash-4.4$ sudo ./test_libbpf.sh
[0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
Couldn't load basic 'r0 = 0' BPF program.
test_libbpf: failed at file test_l4lb.o
selftests: test_libbpf [FAILED]
-bash-4.4$
The reason is because my machine has 64KB locked memory by default which
is not enough for this program to get locked memory.
Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK
to infinity, which fixed the issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vineet Gupta [Thu, 2 May 2019 15:56:50 +0000 (08:56 -0700)]
tools/bpf: fix perf build error with uClibc (seen on ARC)
[ Upstream commit
ca31ca8247e2d3807ff5fa1d1760616a2292001c ]
When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.
| Auto-detecting system features:
|
| ... get_cpuid: [ OFF ]
| ... bpf: [ on ]
|
| # error __NR_bpf not defined. libbpf does not support your arch.
^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
| return syscall(__NR_bpf, cmd, attr, size);
| ^~~~~~~~
| sys_bpf
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raul E Rangel [Mon, 29 Apr 2019 17:32:39 +0000 (11:32 -0600)]
mmc: core: Verify SD bus width
[ Upstream commit
9e4be8d03f50d1b25c38e2b59e73b194c130df7d ]
The SD Physical Layer Spec says the following: Since the SD Memory Card
shall support at least the two bus modes 1-bit or 4-bit width, then any SD
Card shall set at least bits 0 and 2 (SD_BUS_WIDTH="0101").
This change verifies the card has specified a bus width.
AMD SDHC Device 7806 can get into a bad state after a card disconnect
where anything transferred via the DATA lines will always result in a
zero filled buffer. Currently the driver will continue without error if
the HC is in this condition. A block device will be created, but reading
from it will result in a zero buffer. This makes it seem like the SD
device has been erased, when in actuality the data is never getting
copied from the DATA lines to the data buffer.
SCR is the first command in the SD initialization sequence that uses the
DATA lines. By checking that the response was invalid, we can abort
mounting the card.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andreas Gruenbacher [Thu, 4 Apr 2019 20:11:11 +0000 (21:11 +0100)]
gfs2: Fix occasional glock use-after-free
[ Upstream commit
9287c6452d2b1f24ea8e84bd3cf6f3c6f267f712 ]
This patch has to do with the life cycle of glocks and buffers. When
gfs2 metadata or journaled data is queued to be written, a gfs2_bufdata
object is assigned to track the buffer, and that is queued to various
lists, including the glock's gl_ail_list to indicate it's on the active
items list. Once the page associated with the buffer has been written,
it is removed from the ail list, but its life isn't over until a revoke
has been successfully written.
So after the block is written, its bufdata object is moved from the
glock's gl_ail_list to a file-system-wide list of pending revokes,
sd_log_le_revoke. At that point the glock still needs to track how many
revokes it contributed to that list (in gl_revokes) so that things like
glock go_sync can ensure all the metadata has been not only written, but
also revoked before the glock is granted to a different node. This is
to guarantee journal replay doesn't replay the block once the glock has
been granted to another node.
Ross Lagerwall recently discovered a race in which an inode could be
evicted, and its glock freed after its ail list had been synced, but
while it still had unwritten revokes on the sd_log_le_revoke list. The
evict decremented the glock reference count to zero, which allowed the
glock to be freed. After the revoke was written, function
revoke_lo_after_commit tried to adjust the glock's gl_revokes counter
and clear its GLF_LFLUSH flag, at which time it referenced the freed
glock.
This patch fixes the problem by incrementing the glock reference count
in gfs2_add_revoke when the glock's first bufdata object is moved from
the glock to the global revokes list. Later, when the glock's last such
bufdata object is freed, the reference count is decremented. This
guarantees that whichever process finishes last (the revoke writing or
the evict) will properly free the glock, and neither will reference the
glock after it has been freed.
Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Marciniszyn [Mon, 18 Mar 2019 16:55:09 +0000 (09:55 -0700)]
IB/hfi1: Fix WQ_MEM_RECLAIM warning
[ Upstream commit
4c4b1996b5db688e2dcb8242b0a3bf7b1e845e42 ]
The work_item cancels that occur when a QP is destroyed can elicit the
following trace:
workqueue: WQ_MEM_RECLAIM ipoib_wq:ipoib_cm_tx_reap [ib_ipoib] is flushing !WQ_MEM_RECLAIM hfi0_0:_hfi1_do_send [hfi1]
WARNING: CPU: 7 PID: 1403 at kernel/workqueue.c:2486 check_flush_dependency+0xb1/0x100
Call Trace:
__flush_work.isra.29+0x8c/0x1a0
? __switch_to_asm+0x40/0x70
__cancel_work_timer+0x103/0x190
? schedule+0x32/0x80
iowait_cancel_work+0x15/0x30 [hfi1]
rvt_reset_qp+0x1f8/0x3e0 [rdmavt]
rvt_destroy_qp+0x65/0x1f0 [rdmavt]
? _cond_resched+0x15/0x30
ib_destroy_qp+0xe9/0x230 [ib_core]
ipoib_cm_tx_reap+0x21c/0x560 [ib_ipoib]
process_one_work+0x171/0x370
worker_thread+0x49/0x3f0
kthread+0xf8/0x130
? max_active_store+0x80/0x80
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
Since QP destruction frees memory, hfi1_wq should have the WQ_MEM_RECLAIM.
The hfi1_wq does not allocate memory with GFP_KERNEL or otherwise become
entangled with memory reclaim, so this flag is appropriate.
Fixes:
0a226edd203f ("staging/rdma/hfi1: Use parallel workqueue for SDMA engines")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roberto Bergantinos Corpas [Thu, 25 Apr 2019 13:36:51 +0000 (15:36 +0200)]
NFS: make nfs_match_client killable
[ Upstream commit
950a578c6128c2886e295b9c7ecb0b6b22fcc92b ]
Actually we don't do anything with return value from
nfs_wait_client_init_complete in nfs_match_client, as a
consequence if we get a fatal signal and client is not
fully initialised, we'll loop to "again" label
This has been proven to cause soft lockups on some scenarios
(no-carrier but configured network interfaces)
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Mon, 6 May 2019 15:57:54 +0000 (23:57 +0800)]
cxgb4: Fix error path in cxgb4_init_module
[ Upstream commit
a3147770bea76c8dbad73eca3a24c2118da5e719 ]
BUG: unable to handle kernel paging request at
ffffffffa016a270
PGD 3270067 P4D 3270067 PUD 3271063 PMD
230bbd067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:atomic_notifier_chain_register+0x24/0x60
Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08
RSP: 0018:
ffffc90000e2bc60 EFLAGS:
00010086
RAX:
0000000000000292 RBX:
ffffffff83467240 RCX:
ffffffff83467278
RDX:
ffffffffa016a260 RSI:
ffffffff83752140 RDI:
ffffffff83467240
RBP:
ffffc90000e2bc70 R08:
0000000000000000 R09:
0000000000000001
R10:
0000000000000000 R11:
00000000014fa61f R12:
ffffffffa01c8260
R13:
ffff888231091e00 R14:
0000000000000000 R15:
ffffc90000e2be78
FS:
00007fbd8d7cd540(0000) GS:
ffff888237a00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffa016a270 CR3:
000000022c7e3000 CR4:
00000000000006f0
Call Trace:
register_inet6addr_notifier+0x13/0x20
cxgb4_init_module+0x6c/0x1000 [cxgb4
? 0xffffffffa01d7000
do_one_initcall+0x6c/0x3cc
? do_init_module+0x22/0x1f1
? rcu_read_lock_sched_held+0x97/0xb0
? kmem_cache_alloc_trace+0x325/0x3b0
do_init_module+0x5b/0x1f1
load_module+0x1db1/0x2690
? m_show+0x1d0/0x1d0
__do_sys_finit_module+0xc5/0xd0
__x64_sys_finit_module+0x15/0x20
do_syscall_64+0x6b/0x1d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
If pci_register_driver fails, register inet6addr_notifier is
pointless. This patch fix the error path in cxgb4_init_module.
Fixes:
b5a02f503caa ("cxgb4 : Update ipv6 address handling api")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ross Lagerwall [Wed, 27 Mar 2019 17:09:17 +0000 (17:09 +0000)]
gfs2: Fix lru_count going negative
[ Upstream commit
7881ef3f33bb80f459ea6020d1e021fc524a6348 ]
Under certain conditions, lru_count may drop below zero resulting in
a large amount of log spam like this:
vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \
negative objects to delete nr=-1
This happens as follows:
1) A glock is moved from lru_list to the dispose list and lru_count is
decremented.
2) The dispose function calls cond_resched() and drops the lru lock.
3) Another thread takes the lru lock and tries to add the same glock to
lru_list, checking if the glock is on an lru list.
4) It is on a list (actually the dispose list) and so it avoids
incrementing lru_count.
5) The glock is moved to lru_list.
5) The original thread doesn't dispose it because it has been re-added
to the lru list but the lru_count has still decreased by one.
Fix by checking if the LRU flag is set on the glock rather than checking
if the glock is on some list and rearrange the code so that the LRU flag
is added/removed precisely when the glock is added/removed from lru_list.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Sterba [Wed, 29 May 2019 17:25:44 +0000 (19:25 +0200)]
Revert "btrfs: Honour FITRIM range constraints during free space trim"
This reverts commit
8b13bb911f0c0c77d41e5ddc41ad3c127c356b8a.
There is currently no corresponding patch in master due to additional
changes that would be significantly different from plain revert in the
respective stable branch.
The range argument was not handled correctly and could cause trim to
overlap allocated areas or reach beyond the end of the device. The
address space that fitrim normally operates on is in logical
coordinates, while the discards are done on the physical device extents.
This distinction cannot be made with the current ioctl interface and
caused the confusion.
The bug depends on the layout of block groups and does not always
happen. The whole-fs trim (run by default by the fstrim tool) is not
affected.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 5 Apr 2019 01:04:13 +0000 (21:04 -0400)]
acct_on(): don't mess with freeze protection
commit
9419a3191dcb27f24478d288abaab697228d28e6 upstream.
What happens there is that we are replacing file->path.mnt of
a file we'd just opened with a clone and we need the write
count contribution to be transferred from original mount to
new one. That's it. We do *NOT* want any kind of freeze
protection for the duration of switchover.
IOW, we should just use __mnt_{want,drop}_write() for that
switchover; no need to bother with mnt_{want,drop}_write()
there.
Tested-by: Amir Goldstein <amir73il@gmail.com>
Reported-by: syzbot+2a73a6ea9507b7112141@syzkaller.appspotmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Mon, 8 Apr 2019 03:45:29 +0000 (11:45 +0800)]
at76c50x-usb: Don't register led_trigger if usb_register_driver failed
commit
09ac2694b0475f96be895848687ebcbba97eeecf upstream.
Syzkaller report this:
[ 1213.468581] BUG: unable to handle kernel paging request at
fffffbfff83bf338
[ 1213.469530] #PF error: [normal kernel read fault]
[ 1213.469530] PGD
237fe4067 P4D
237fe4067 PUD
237e60067 PMD
1c868b067 PTE 0
[ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI
[ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G C 5.1.0-rc3+ #8
[ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1213.473514] RIP: 0010:strcmp+0x31/0xa0
[ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
[ 1213.473514] RSP: 0018:
ffff8881f2b7f950 EFLAGS:
00010246
[ 1213.473514] RAX:
1ffffffff83bf338 RBX:
ffff8881ea6f7240 RCX:
ffffffff825350c6
[ 1213.473514] RDX:
0000000000000000 RSI:
ffffffffc1ee19c0 RDI:
ffffffffc1df99c0
[ 1213.473514] RBP:
ffffffffc1df99c1 R08:
0000000000000001 R09:
0000000000000004
[ 1213.473514] R10:
0000000000000000 R11:
ffff8881de353f00 R12:
ffff8881ee727900
[ 1213.473514] R13:
dffffc0000000000 R14:
0000000000000001 R15:
ffffffffc1eeaaf0
[ 1213.473514] FS:
00007fa66fa01700(0000) GS:
ffff8881f7200000(0000) knlGS:
0000000000000000
[ 1213.473514] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1213.473514] CR2:
fffffbfff83bf338 CR3:
00000001ebb9e005 CR4:
00000000007606f0
[ 1213.473514] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 1213.473514] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 1213.473514] PKRU:
55555554
[ 1213.473514] Call Trace:
[ 1213.473514] led_trigger_register+0x112/0x3f0
[ 1213.473514] led_trigger_register_simple+0x7a/0x110
[ 1213.473514] ? 0xffffffffc1c10000
[ 1213.473514] at76_mod_init+0x77/0x1000 [at76c50x_usb]
[ 1213.473514] do_one_initcall+0xbc/0x47d
[ 1213.473514] ? perf_trace_initcall_level+0x3a0/0x3a0
[ 1213.473514] ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514] ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514] do_init_module+0x1b5/0x547
[ 1213.473514] load_module+0x6405/0x8c10
[ 1213.473514] ? module_frob_arch_sections+0x20/0x20
[ 1213.473514] ? kernel_read_file+0x1e6/0x5d0
[ 1213.473514] ? find_held_lock+0x32/0x1c0
[ 1213.473514] ? cap_capable+0x1ae/0x210
[ 1213.473514] ? __do_sys_finit_module+0x162/0x190
[ 1213.473514] __do_sys_finit_module+0x162/0x190
[ 1213.473514] ? __ia32_sys_init_module+0xa0/0xa0
[ 1213.473514] ? __mutex_unlock_slowpath+0xdc/0x690
[ 1213.473514] ? wait_for_completion+0x370/0x370
[ 1213.473514] ? vfs_write+0x204/0x4a0
[ 1213.473514] ? do_syscall_64+0x18/0x450
[ 1213.473514] do_syscall_64+0x9f/0x450
[ 1213.473514] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1213.473514] RIP: 0033:0x462e99
[ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
[ 1213.473514] RSP: 002b:
00007fa66fa00c58 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 1213.473514] RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
[ 1213.473514] RDX:
0000000000000000 RSI:
0000000020000300 RDI:
0000000000000003
[ 1213.473514] RBP:
00007fa66fa00c70 R08:
0000000000000000 R09:
0000000000000000
[ 1213.473514] R10:
0000000000000000 R11:
0000000000000246 R12:
00007fa66fa016bc
[ 1213.473514] R13:
00000000004bcefa R14:
00000000006f6fb0 R15:
0000000000000004
If usb_register failed, no need to call led_trigger_register_simple.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
1264b951463a ("at76c50x-usb: add driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Lüssing [Wed, 24 Apr 2019 01:19:14 +0000 (03:19 +0200)]
batman-adv: mcast: fix multicast tt/tvlv worker locking
commit
a3c7cd0cdf1107f891aff847ad481e34df727055 upstream.
Syzbot has reported some issues with the locking assumptions made for
the multicast tt/tvlv worker: It was able to trigger the WARN_ON() in
batadv_mcast_mla_tt_retract() and batadv_mcast_mla_tt_add().
While hard/not reproduceable for us so far it seems that the
delayed_work_pending() we use might not be quite safe from reordering.
Therefore this patch adds an explicit, new spinlock to protect the
update of the mla_list and flags in bat_priv and then removes the
WARN_ON(delayed_work_pending()).
Reported-by: syzbot+83f2d54ec6b7e417e13f@syzkaller.appspotmail.com
Reported-by: syzbot+050927a651272b145a5d@syzkaller.appspotmail.com
Reported-by: syzbot+979ffc89b87309b1b94b@syzkaller.appspotmail.com
Reported-by: syzbot+f9f3f388440283da2965@syzkaller.appspotmail.com
Fixes:
cbebd363b2e9 ("batman-adv: Use own timer for multicast TT and TVLV updates")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 13 May 2019 16:59:16 +0000 (09:59 -0700)]
bpf: devmap: fix use-after-free Read in __dev_map_entry_free
commit
2baae3545327632167c0180e9ca1d467416f1919 upstream.
synchronize_rcu() is fine when the rcu callbacks only need
to free memory (kfree_rcu() or direct kfree() call rcu call backs)
__dev_map_entry_free() is a bit more complex, so we need to make
sure that call queued __dev_map_entry_free() callbacks have completed.
sysbot report:
BUG: KASAN: use-after-free in dev_map_flush_old kernel/bpf/devmap.c:365
[inline]
BUG: KASAN: use-after-free in __dev_map_entry_free+0x2a8/0x300
kernel/bpf/devmap.c:379
Read of size 8 at addr
ffff8801b8da38c8 by task ksoftirqd/1/18
CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
dev_map_flush_old kernel/bpf/devmap.c:365 [inline]
__dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379
__rcu_reclaim kernel/rcu/rcu.h:178 [inline]
rcu_do_batch kernel/rcu/tree.c:2558 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2818 [inline]
__rcu_process_callbacks kernel/rcu/tree.c:2785 [inline]
rcu_process_callbacks+0xe9d/0x1760 kernel/rcu/tree.c:2802
__do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
run_ksoftirqd+0x86/0x100 kernel/softirq.c:645
smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
kthread+0x345/0x410 kernel/kthread.c:240
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
Allocated by task 6675:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
kmalloc include/linux/slab.h:513 [inline]
kzalloc include/linux/slab.h:706 [inline]
dev_map_alloc+0x208/0x7f0 kernel/bpf/devmap.c:102
find_and_alloc_map kernel/bpf/syscall.c:129 [inline]
map_create+0x393/0x1010 kernel/bpf/syscall.c:453
__do_sys_bpf kernel/bpf/syscall.c:2351 [inline]
__se_sys_bpf kernel/bpf/syscall.c:2328 [inline]
__x64_sys_bpf+0x303/0x510 kernel/bpf/syscall.c:2328
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 26:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xd9/0x260 mm/slab.c:3813
dev_map_free+0x4fa/0x670 kernel/bpf/devmap.c:191
bpf_map_free_deferred+0xba/0xf0 kernel/bpf/syscall.c:262
process_one_work+0xc64/0x1b70 kernel/workqueue.c:2153
worker_thread+0x181/0x13a0 kernel/workqueue.c:2296
kthread+0x345/0x410 kernel/kthread.c:240
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412
The buggy address belongs to the object at
ffff8801b8da37c0
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
512-byte region [
ffff8801b8da37c0,
ffff8801b8da39c0)
The buggy address belongs to the page:
page:
ffffea0006e368c0 count:1 mapcount:0 mapping:
ffff8801da800940
index:0xffff8801b8da3540
flags: 0x2fffc0000000100(slab)
raw:
02fffc0000000100 ffffea0007217b88 ffffea0006e30cc8 ffff8801da800940
raw:
ffff8801b8da3540 ffff8801b8da3040 0000000100000004 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801b8da3780: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8801b8da3800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8801b8da3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8801b8da3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801b8da3980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
Fixes:
546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+457d3e2ffbcf31aee5c0@syzkaller.appspotmail.com
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Wed, 6 Mar 2019 11:56:58 +0000 (19:56 +0800)]
ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
commit
b2c01aab9646ed8ffb7c549afe55d5349c482425 upstream.
Syzkaller report this:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468
Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d
RSP: 0018:
ffff8881e9d9fc00 EFLAGS:
00010206
RAX:
dffffc0000000000 RBX:
ffffffff900367e0 RCX:
ffffffff81a95952
RDX:
0000000000000006 RSI:
ffffc90001405000 RDI:
0000000000000030
RBP:
0000000000000000 R08:
fffffbfff1fa22ed R09:
fffffbfff1fa22ed
R10:
0000000000000001 R11:
fffffbfff1fa22ec R12:
0000000000000000
R13:
ffffffffc1abdac0 R14:
1ffff1103d3b3f8b R15:
0000000000000000
FS:
00007fe409dc1700(0000) GS:
ffff8881f1200000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000001b2d721000 CR3:
00000001e98b6005 CR4:
00000000007606f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline]
pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209
ssb_modexit+0xa/0x1b [ssb]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007fe409dc0c58 EFLAGS:
00000246 ORIG_RAX:
00000000000000b0
RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
00000000200000c0
RBP:
0000000000000002 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007fe409dc16bc
R13:
00000000004bccaa R14:
00000000006f6bc8 R15:
00000000ffffffff
Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6
[last unloaded: 3c59x]
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace
3913cbf8011e1c05 ]---
In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed,
however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver
unconditionally, which may tigger a NULL pointer dereference issue as above.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Potapenko [Thu, 4 Apr 2019 14:56:46 +0000 (10:56 -0400)]
media: vivid: use vfree() instead of kfree() for dev->bitmap_cap
commit
dad7e270ba712ba1c99cd2d91018af6044447a06 upstream.
syzkaller reported crashes on kfree() called from
vivid_vid_cap_s_selection(). This looks like a simple typo, as
dev->bitmap_cap is allocated with vzalloc() throughout the file.
Fixes:
ef834f7836ec0 ("[media] vivid: add the video capture and output
parts")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Syzbot <syzbot+6c0effb5877f6b0344e2@syzkaller.appspotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans Verkuil [Mon, 19 Nov 2018 11:09:00 +0000 (06:09 -0500)]
media: vb2: add waiting_in_dqbuf flag
commit
d65842f7126aa1a87fb44b7c9980c12630ed4f33 upstream.
Calling VIDIOC_DQBUF can release the core serialization lock pointed to
by vb2_queue->lock if it has to wait for a new buffer to arrive.
However, if userspace dup()ped the video device filehandle, then it is
possible to read or call DQBUF from two filehandles at the same time.
It is also possible to call REQBUFS from one filehandle while the other
is waiting for a buffer. This will remove all the buffers and reallocate
new ones. Removing all the buffers isn't the problem here (that's already
handled correctly by DQBUF), but the reallocating part is: DQBUF isn't
aware that the buffers have changed.
This is fixed by setting a flag whenever the lock is released while waiting
for a buffer to arrive. And checking the flag where needed so we can return
-EBUSY.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Syzbot <syzbot+4180ff9ca6810b06c1e9@syzkaller.appspotmail.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Tue, 5 Mar 2019 05:40:26 +0000 (00:40 -0500)]
media: serial_ir: Fix use-after-free in serial_ir_init_module
commit
56cd26b618855c9af48c8301aa6754ced8dd0beb upstream.
Syzkaller report this:
BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr
ffff8881dc7ae030 by task syz-executor.0/6249
CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
? 0xffffffffc1728000
sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
remove_bind_files drivers/base/bus.c:585 [inline]
bus_remove_driver+0x186/0x220 drivers/base/bus.c:725
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
serial_ir_init_module+0x169/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f9450132c58 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
RDX:
0000000000000000 RSI:
0000000020000100 RDI:
0000000000000003
RBP:
00007f9450132c70 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f94501336bc
R13:
00000000004bcefa R14:
00000000006f6fb0 R15:
0000000000000004
Allocated by task 6249:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
kmalloc include/linux/slab.h:545 [inline]
kzalloc include/linux/slab.h:740 [inline]
bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
serial_ir_init_module+0xe8/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 6249:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
slab_free_hook mm/slub.c:1430 [inline]
slab_free_freelist_hook mm/slub.c:1457 [inline]
slab_free mm/slub.c:3005 [inline]
kfree+0xe1/0x270 mm/slub.c:3957
kobject_cleanup lib/kobject.c:662 [inline]
kobject_release lib/kobject.c:691 [inline]
kref_put include/linux/kref.h:67 [inline]
kobject_put+0x146/0x240 lib/kobject.c:708
bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
serial_ir_init_module+0x14c/0x1000 [serial_ir]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8881dc7ae000
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
256-byte region [
ffff8881dc7ae000,
ffff8881dc7ae100)
The buggy address belongs to the page:
page:
ffffea000771eb80 count:1 mapcount:0 mapping:
ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw:
02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00
raw:
0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
There are already cleanup handlings in serial_ir_init error path,
no need to call serial_ir_exit do it again in serial_ir_init_module,
otherwise will trigger a use-after-free issue.
Fixes:
fa5dc29c1fcc ("[media] lirc_serial: move out of staging and rename to serial_ir")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Wed, 6 Mar 2019 12:45:08 +0000 (07:45 -0500)]
media: cpia2: Fix use-after-free in cpia2_exit
commit
dea37a97265588da604c6ba80160a287b72c7bfd upstream.
Syzkaller report this:
BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr
ffff8881f59a6b70 by task syz-executor.0/8363
CPU: 0 PID: 8363 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
sysfs_remove_file include/linux/sysfs.h:519 [inline]
driver_remove_file+0x40/0x50 drivers/base/driver.c:122
usb_remove_newid_files drivers/usb/core/driver.c:212 [inline]
usb_deregister+0x12a/0x3b0 drivers/usb/core/driver.c:1005
cpia2_exit+0xa/0x16 [cpia2]
__do_sys_delete_module kernel/module.c:1018 [inline]
__se_sys_delete_module kernel/module.c:961 [inline]
__x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f86f3754c58 EFLAGS:
00000246 ORIG_RAX:
00000000000000b0
RAX:
ffffffffffffffda RBX:
000000000073bf00 RCX:
0000000000462e99
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000020000300
RBP:
0000000000000002 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f86f37556bc
R13:
00000000004bcca9 R14:
00000000006f6b48 R15:
00000000ffffffff
Allocated by task 8363:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
kmalloc include/linux/slab.h:545 [inline]
kzalloc include/linux/slab.h:740 [inline]
bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
usb_register_driver+0x267/0x520 drivers/usb/core/driver.c:965
0xffffffffc1b4817c
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 8363:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
slab_free_hook mm/slub.c:1430 [inline]
slab_free_freelist_hook mm/slub.c:1457 [inline]
slab_free mm/slub.c:3005 [inline]
kfree+0xe1/0x270 mm/slub.c:3957
kobject_cleanup lib/kobject.c:662 [inline]
kobject_release lib/kobject.c:691 [inline]
kref_put include/linux/kref.h:67 [inline]
kobject_put+0x146/0x240 lib/kobject.c:708
bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
usb_register_driver+0x341/0x520 drivers/usb/core/driver.c:980
0xffffffffc1b4817c
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at
ffff8881f59a6b40
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
256-byte region [
ffff8881f59a6b40,
ffff8881f59a6c40)
The buggy address belongs to the page:
page:
ffffea0007d66980 count:1 mapcount:0 mapping:
ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw:
02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6c02e00
raw:
0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881f59a6a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881f59a6a80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
>
ffff8881f59a6b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^
ffff8881f59a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881f59a6c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
cpia2_init does not check return value of cpia2_init, if it failed
in usb_register_driver, there is already cleanup using driver_unregister.
No need call cpia2_usb_cleanup on module exit.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiufei Xue [Thu, 11 Apr 2019 17:25:12 +0000 (19:25 +0200)]
fbdev: fix WARNING in __alloc_pages_nodemask bug
commit
8c40292be9169a9cbe19aadd1a6fc60cbd1af82f upstream.
Syzkaller hit 'WARNING in __alloc_pages_nodemask' bug.
WARNING: CPU: 1 PID: 1473 at mm/page_alloc.c:4377
__alloc_pages_nodemask+0x4da/0x2130
Kernel panic - not syncing: panic_on_warn set ...
Call Trace:
alloc_pages_current+0xb1/0x1e0
kmalloc_order+0x1f/0x60
kmalloc_order_trace+0x1d/0x120
fb_alloc_cmap_gfp+0x85/0x2b0
fb_set_user_cmap+0xff/0x370
do_fb_ioctl+0x949/0xa20
fb_ioctl+0xdd/0x120
do_vfs_ioctl+0x186/0x1070
ksys_ioctl+0x89/0xa0
__x64_sys_ioctl+0x74/0xb0
do_syscall_64+0xc8/0x550
entry_SYSCALL_64_after_hwframe+0x49/0xbe
This is a warning about order >= MAX_ORDER and the order is from
userspace ioctl. Add flag __NOWARN to silence this warning.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Goldstein [Thu, 28 Mar 2019 15:38:29 +0000 (17:38 +0200)]
ovl: relax WARN_ON() for overlapping layers use case
commit
acf3062a7e1ccf67c6f7e7c28671a6708fde63b0 upstream.
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=
12c7a94f400000
Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:
mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"
The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.
The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.
On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.
Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.
The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes:
01b39dcc9568 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Wed, 16 Jan 2019 16:00:57 +0000 (11:00 -0500)]
btrfs: honor path->skip_locking in backref code
commit
38e3eebff643db725633657d1d87a3be019d1018 upstream.
Qgroups will do the old roots lookup at delayed ref time, which could be
while walking down the extent root while running a delayed ref. This
should be fine, except we specifically lock eb's in the backref walking
code irrespective of path->skip_locking, which deadlocks the system.
Fix up the backref code to honor path->skip_locking, nobody will be
modifying the commit_root when we're searching so it's completely safe
to do.
This happens since
fb235dc06fac ("btrfs: qgroup: Move half of the qgroup
accounting time out of commit trans"), kernel may lockup with quota
enabled.
There is one backref trace triggered by snapshot dropping along with
write operation in the source subvolume. The example can be reliably
reproduced:
btrfs-cleaner D 0 4062 2 0x80000000
Call Trace:
schedule+0x32/0x90
btrfs_tree_read_lock+0x93/0x130 [btrfs]
find_parent_nodes+0x29b/0x1170 [btrfs]
btrfs_find_all_roots_safe+0xa8/0x120 [btrfs]
btrfs_find_all_roots+0x57/0x70 [btrfs]
btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs]
btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs]
btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs]
do_walk_down+0x541/0x5e3 [btrfs]
walk_down_tree+0xab/0xe7 [btrfs]
btrfs_drop_snapshot+0x356/0x71a [btrfs]
btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs]
cleaner_kthread+0x12b/0x160 [btrfs]
kthread+0x112/0x130
ret_from_fork+0x27/0x50
When dropping snapshots with qgroup enabled, we will trigger backref
walk.
However such backref walk at that timing is pretty dangerous, as if one
of the parent nodes get WRITE locked by other thread, we could cause a
dead lock.
For example:
FS 260 FS 261 (Dropped)
node A node B
/ \ / \
node C node D node E
/ \ / \ / \
leaf F|leaf G|leaf H|leaf I|leaf J|leaf K
The lock sequence would be:
Thread A (cleaner) | Thread B (other writer)
-----------------------------------------------------------------------
write_lock(B) |
write_lock(D) |
^^^ called by walk_down_tree() |
| write_lock(A)
| write_lock(D) << Stall
read_lock(H) << for backref walk |
read_lock(D) << lock owner is |
the same thread A |
so read lock is OK |
read_lock(A) << Stall |
So thread A hold write lock D, and needs read lock A to unlock.
While thread B holds write lock A, while needs lock D to unlock.
This will cause a deadlock.
This is not only limited to snapshot dropping case. As the backref
walk, even only happens on commit trees, is breaking the normal top-down
locking order, makes it deadlock prone.
Fixes:
fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans")
CC: stable@vger.kernel.org # 4.14+
Reported-and-tested-by: David Sterba <dsterba@suse.com>
Reported-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ rebase to latest branch and fix lock assert bug in btrfs/007 ]
[ backport to linux-4.19.y branch, solve minor conflicts ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ copy logs and deadlock analysis from Qu's patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Apr 2019 12:03:57 +0000 (13:03 +0100)]
arm64: errata: Add workaround for Cortex-A76 erratum #1463225
commit
969f5ea627570e91c9d54403287ee3ed657f58fe upstream.
Revisions of the Cortex-A76 CPU prior to r4p0 are affected by an erratum
that can prevent interrupts from being taken when single-stepping.
This patch implements a software workaround to prevent userspace from
effectively being able to disable interrupts.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arend van Spriel [Thu, 14 Feb 2019 12:43:48 +0000 (13:43 +0100)]
brcmfmac: add subtype check for event handling in data path
commit
a4176ec356c73a46c07c181c6d04039fafa34a9f upstream.
For USB there is no separate channel being used to pass events
from firmware to the host driver and as such are passed over the
data path. In order to detect mock event messages an additional
check is needed on event subtype. This check is added conditionally
using unlikely() keyword.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arend van Spriel [Thu, 14 Feb 2019 12:43:47 +0000 (13:43 +0100)]
brcmfmac: assure SSID length from firmware is limited
commit
1b5e2423164b3670e8bc9174e4762d297990deff upstream.
The SSID length as received from firmware should not exceed
IEEE80211_MAX_SSID_LEN as that would result in heap overflow.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Mon, 22 Oct 2018 23:11:04 +0000 (01:11 +0200)]
bpf: add bpf_jit_limit knob to restrict unpriv allocations
commit
ede95a63b5e84ddeea6b0c473b36ab8bfd8c6ce3 upstream.
Rick reported that the BPF JIT could potentially fill the entire module
space with BPF programs from unprivileged users which would prevent later
attempts to load normal kernel modules or privileged BPF programs, for
example. If JIT was enabled but unsuccessful to generate the image, then
before commit
290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
we would always fall back to the BPF interpreter. Nowadays in the case
where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort
with a failure since the BPF interpreter was compiled out.
Add a global limit and enforce it for unprivileged users such that in case
of BPF interpreter compiled out we fail once the limit has been reached
or we fall back to BPF interpreter earlier w/o using module mem if latter
was compiled in. In a next step, fair share among unprivileged users can
be resolved in particular for the case where we would fail hard once limit
is reached.
Fixes:
290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
Fixes:
0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olga Kornievskaia [Thu, 11 Apr 2019 18:34:18 +0000 (14:34 -0400)]
NFSv4.1 fix incorrect return value in copy_file_range
commit
0769663b4f580566ef6cdf366f3073dbe8022c39 upstream.
According to the NFSv4.2 spec if the input and output file is the
same file, operation should fail with EINVAL. However, linux
copy_file_range() system call has no such restrictions. Therefore,
in such case let's return EOPNOTSUPP and allow VFS to fallback
to doing do_splice_direct(). Also when copy_file_range is called
on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support
COPY functionality), we also need to return EOPNOTSUPP and
fallback to a regular copy.
Fixes xfstest generic/075, generic/091, generic/112, generic/263
for all NFSv4.x versions.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Yu Xu <xuyu@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olga Kornievskaia [Sat, 12 Jan 2019 00:04:44 +0000 (19:04 -0500)]
NFSv4.2 fix unnecessary retry in nfs4_copy_file_range
commit
45ac486ecf2dc998e25cf32f0cabf2deaad875be upstream.
Currently nfs42_proc_copy_file_range() can not return EAGAIN.
Fixes:
e4648aa4f98a ("NFS recover from destination server reboot for copies")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Yu Xu <xuyu@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shile Zhang [Mon, 1 Apr 2019 15:47:00 +0000 (17:47 +0200)]
fbdev: fix divide error in fb_var_to_videomode
commit
cf84807f6dd0be5214378e66460cfc9187f532f9 upstream.
To fix following divide-by-zero error found by Syzkaller:
divide error: 0000 [#1] SMP PTI
CPU: 7 PID: 8447 Comm: test Kdump: loaded Not tainted 4.19.24-8.al7.x86_64 #1
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
RIP: 0010:fb_var_to_videomode+0xae/0xc0
Code: 04 44 03 46 78 03 4e 7c 44 03 46 68 03 4e 70 89 ce d1 ee 69 c0 e8 03 00 00 f6 c2 01 0f 45 ce 83 e2 02 8d 34 09 0f 45 ce 31 d2 <41> f7 f0 31 d2 f7 f1 89 47 08 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00
RSP: 0018:
ffffb7e189347bf0 EFLAGS:
00010246
RAX:
00000000e1692410 RBX:
ffffb7e189347d60 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffffb7e189347c10
RBP:
ffff99972a091c00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000100
R13:
0000000000010000 R14:
00007ffd66baf6d0 R15:
0000000000000000
FS:
00007f2054d11740(0000) GS:
ffff99972fbc0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f205481fd20 CR3:
00000004288a0001 CR4:
00000000001606a0
Call Trace:
fb_set_var+0x257/0x390
? lookup_fast+0xbb/0x2b0
? fb_open+0xc0/0x140
? chrdev_open+0xa6/0x1a0
do_fb_ioctl+0x445/0x5a0
do_vfs_ioctl+0x92/0x5f0
? __alloc_fd+0x3d/0x160
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5b/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f20548258d7
Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48
It can be triggered easily with following test code:
#include <linux/fb.h>
#include <fcntl.h>
#include <sys/ioctl.h>
int main(void)
{
struct fb_var_screeninfo var = {.activate = 0x100, .pixclock = 60};
int fd = open("/dev/fb0", O_RDWR);
if (fd < 0)
return 1;
if (ioctl(fd, FBIOPUT_VSCREENINFO, &var))
return 1;
return 0;
}
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Fredrik Noring <noring@nocrew.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 20 Dec 2018 18:13:07 +0000 (19:13 +0100)]
udlfb: fix some inconsistent NULL checking
commit
c143a559b073aeea688b9bb7c5b46f3cf322d569 upstream.
In the current kernel, then kzalloc() can't fail for small allocations,
but if it did fail then we would have a NULL dereference in the error
handling. Also in dlfb_usb_disconnect() if "info" were NULL then it
would cause an Oops inside the unregister_framebuffer() function but it
can't be NULL so let's remove that check.
Fixes:
68a958a915ca ("udlfb: handle unplug properly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Wen Yang <wen.yang99@zte.com.cn>
[b.zolnierkie: added "Fixes:" tag]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 May 2019 03:39:12 +0000 (13:39 +1000)]
btrfs: sysfs: don't leak memory when failing add fsid
commit
e32773357d5cc271b1d23550b3ed026eb5c2a468 upstream.
A failed call to kobject_init_and_add() must be followed by a call to
kobject_put(). Currently in the error path when adding fs_devices we
are missing this call. This could be fixed by calling
btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or
by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid().
Here we choose the second option because it prevents the slightly
unusual error path handling requirements of kobject from leaking out
into btrfs functions.
Add a call to kobject_put() in the error path of kobject_add_and_init().
This causes the release method to be called if kobject_init_and_add()
fails. open_tree() is the function that calls btrfs_sysfs_add_fsid()
and the error code in this function is already written with the
assumption that the release method is called during the error path of
open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the
fail_fsdev_sysfs label).
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tobin C. Harding [Mon, 13 May 2019 03:39:11 +0000 (13:39 +1000)]
btrfs: sysfs: Fix error path kobject memory leak
commit
450ff8348808a89cc27436771aa05c2b90c0eef1 upstream.
If a call to kobject_init_and_add() fails we must call kobject_put()
otherwise we leak memory.
Calling kobject_put() when kobject_init_and_add() fails drops the
refcount back to 0 and calls the ktype release method (which in turn
calls the percpu destroy and kfree).
Add call to kobject_put() in the error path of call to
kobject_init_and_add().
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi3.git / log