Florian Weimer [Wed, 24 Jul 2019 08:59:45 +0000 (10:59 +0200)]
build-many-glibcs.py: Use Linux 5.2 by default
Florian Weimer [Wed, 24 Jul 2019 08:59:34 +0000 (10:59 +0200)]
Linux: Use in-tree copy of SO_ constants for !__USE_MISC [BZ #24532]
The kernel changes for a 64-bit time_t on 32-bit architectures
resulted in <asm/socket.h> indirectly including <linux/posix_types.h>.
The latter is not namespace-clean for the POSIX version of
<sys/socket.h>.
This issue has persisted across several Linux releases, so this commit
creates our own copy of the SO_* definitions for !__USE_MISC mode.
The new test socket/tst-socket-consts ensures that the copy is
consistent with the kernel definitions (which vary across
architectures). The test is tricky to get right because CPPFLAGS
includes include/libc-symbols.h, which in turn defines _GNU_SOURCE
unconditionally.
Tested with build-many-glibcs.py. I verified that a discrepancy in
the definitions actually results in a failure of the
socket/tst-socket-consts test.
Tulio Magno Quites Machado Filho [Mon, 22 Jul 2019 20:34:13 +0000 (17:34 -0300)]
test-container: Install with $(all-subdirs) [BZ #24794]
Whenever a sub-make is created, it inherits the variable subdirs from its
parent. This is also true when make check is called with a restricted
list of subdirs. In this scenario, make install is executed "partially"
and testroot.pristine ends up with an incomplete installation.
[BZ #24794]
* Makefile (testroot.pristine/install.stamp): Pass
subdirs='$(all-subdirs)' to make install.
Reviewed-by: DJ Delorie <dj@redhat.com>
Tulio Magno Quites Machado Filho [Mon, 22 Jul 2019 19:30:45 +0000 (16:30 -0300)]
test-container: Avoid copying unintended system libraries
Some DSOs are distributed in hardware capability directories, e.g.
/usr/lib64/power7/libc.so.6
Whenever the processor is able to use one of these hardware-enabled
DSOs, testroot.pristine ends up with copies of glibc-provided libraries
from the system because it can't overwrite or remove them.
This patch avoids the unintended copies by executing ld.so with the same
arguments passed to each glibc test.
* Makefile (testroot.pristine/install.stamp): Execute ld.so with
the same arguments used in all tests.
Szabolcs Nagy [Mon, 22 Jul 2019 09:14:16 +0000 (10:14 +0100)]
Add NEWS entry about the new AArch64 IFUNC resolver call ABI
The new IFUNC resolver call ABI was introduced in
commit
2b8a3c86e7606cf1b0a997dad8af2d45ae8989c3
Commit: Szabolcs Nagy <szabolcs.nagy@arm.com>
CommitDate: 2019-07-04 11:13:32 +0100
aarch64: new ifunc resolver ABI
See the commit log and the comments in sys/ifunc.h for details.
Egor Kobylkin [Wed, 2 Jan 2019 04:50:13 +0000 (05:50 +0100)]
locale/C-translit.h.in: Cyrillic -> ASCII transliteration [BZ #2872]
This patch adds Cyrillic to plain ASCII transliteration table according
to GOST 7.79-2000 System B standard to the C locale.
[BZ #2872]
* locale/C-translit.h.in: Add Cyrillic transliteration.
Florian Weimer [Fri, 19 Jul 2019 06:53:04 +0000 (08:53 +0200)]
Linux: Update syscall-names.list to Linux 5.2
This adds the system call names fsconfig, fsmount, fsopen, fspick,
move_mount, open_tree.
Tested with build-many-glibcs.py.
Carlos O'Donell [Thu, 18 Jul 2019 17:30:00 +0000 (13:30 -0400)]
Regenerate po/libc.pot for 2.30 release.
Adhemerval Zanella [Wed, 17 Jul 2019 17:56:51 +0000 (14:56 -0300)]
nptl: Add POSIX-proposed _clock functions to hppa pthread.h
The pthread _clock functions that were recently added to nptl need to be
declared in hppa's pthread.h too. After this change, the function
declaration part of sysdeps/nptl/pthread.h and
sysdeps/unix/sysv/linux/hppa/pthread.h are identical.
* sysdeps/unix/sysv/linux/hppa/pthread.h: Add declarations of
functions recently added to sysdeps/nptl/pthread.h:
pthread_mutex_clocklock, pthread_rwlock_clockrdlock,
pthread_rwlock_clockwrlock and pthread_cond_clockwait.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Wed, 17 Jul 2019 17:51:08 +0000 (14:51 -0300)]
nptl: Remove unnecessary forwarding of pthread_cond_clockwait from libc
In
afe4de7d283ebd88157126c5494ce1796194c16e, I added forwarding functions
from libc to libpthread for __pthread_cond_clockwait and
pthread_cond_clockwait to mirror those for pthread_cond_timedwait. These
are unnecessary[1], since these functions aren't (yet) being called from
within libc itself. Let's remove them.
* nptl/forward.c: Remove unnecessary __pthread_cond_clockwait and
pthread_cond_clockwait forwarding functions. There are no internal
users, so it is unnecessary to expose these functions in libc.so.
* sysdeps/nptl/pthread-functions.h (pthread_functions): Remove
unnecessary ptr___pthread_cond_clockwait member.
* nptl/nptl-init.c (pthread_functions): Remove assignment of
removed member.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
[1] https://sourceware.org/ml/libc-alpha/2017-10/msg00082.html
Rafal Luzynski [Mon, 8 Jul 2019 21:49:42 +0000 (23:49 +0200)]
Afar locales: Months and days updated from CLDR (bug 21897).
This commit updates month and weekday names (full and abbreviated)
from CLDR 35.1 with the following exceptions.
It was not clear why the full name of February in aa_DJ and aa_ER was
"Kudo" while the abbreviated version is "Nah" but some additional
sources [1] [2] as well as the content of aa_ER and aa_ER@saaho
suggest it should be "Naharsi Kudo". This commit consequently sets
the translation of February to "Naharsi Kudo" in aa_DJ and aa_ET.
aa_ER@saaho is not supported by CLDR but since the month names were
identical to aa_ER before this commit, the same values have been copied
from aa_ER.
Links:
[1] https://fr.wiktionary.org/wiki/naharsi_kudo
[2] http://www.mcit.gov.et/web/guest/-/localization-standard-for-afaraf
[BZ #21897]
* localedata/locales/aa_DJ (abday): Update from CLDR, all words
begin with an uppercase letter now.
(abmon): Likewise.
(mon): Update from CLDR, reword February from "Kudo" to
"Naharsi Kudo", April from "Agda Baxisso" to "Agda Baxis",
and August from "Liiqen" to "Leqeeni".
* localedata/locales/aa_ER (mon): Update from CLDR, reword
April from "Agda Baxisso" to "Agda Baxis" and August from
"Leqeeni" to "Liiqen".
* localedata/locales/aa_ER@saaho (mon): Likewise.
* localedata/locales/aa_ET (abmon): Update from CLDR, reword
abbreviated February from "Kud" to "Nah".
(mon): Update from CLDR, reword February from "Kudo" to
"Naharsi Kudo" and April from "Agda Baxisso" to "Agda Baxis".
Rafal Luzynski [Tue, 9 Jul 2019 09:53:43 +0000 (11:53 +0200)]
nl_BE locale: Use "copy "nl_NL"" in LC_NAME (bug 23996).
The content of the section is identical in both languages.
[BZ #23996]
* localedata/locales/nl_BE (LC_NAME): Replace with “copy "nl_NL"”.
PanderMusubi [Sun, 16 Dec 2018 20:09:07 +0000 (20:09 +0000)]
nl_BE and nl_NL locales: Dutch salutations (bug 23996).
[BZ #23996]
* localedata/locales/nl_BE (LC_NAME): Add name_gen, name_mr,
name_mrs, name_miss, and name_ms.
* localedata/locales/nl_NL (LC_NAME): Likewise.
Daniil Zhilin [Sun, 27 Nov 2016 19:46:26 +0000 (22:46 +0300)]
ga_IE and en_IE locales: Revert first_weekday removal (bug 24200).
These values were removed by the commit
0a410e76f5.
[BZ #24200]
* localedata/locales/ga_IE (first_weekday): Add, set to 2 (Monday).
* localedata/locales/en_IE (first_weekday): Likewise.
Mike Crowe [Mon, 24 Jun 2019 20:18:00 +0000 (20:18 +0000)]
nptl: Remove futex_supports_exact_relative_timeouts
The only implementation of futex_supports_exact_relative_timeouts always
returns true. Let's remove it and all its callers.
* nptl/pthread_cond_wait.c: (__pthread_cond_clockwait): Remove code
that is only useful if futex_supports_exact_relative_timeouts ()
returns false.
* nptl/pthread_condattr_setclock.c: (pthread_condattr_setclock):
Likewise.
* sysdeps/nptl/futex-internal.h: Remove comment about relative
timeouts potentially being imprecise since it's no longer true.
Remove declaration of futex_supports_exact_relative_timeouts.
* sysdeps/unix/sysv/linux/futex-internal.h: Remove implementation
of futex_supports_exact_relative_timeouts.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Mon, 24 Jun 2019 19:51:03 +0000 (19:51 +0000)]
Update NEWS for new _clockwait and _clocklock functions
* NEWS: Mention recently-added pthread_cond_clockwait,
pthread_rwlock_clockrdlock, pthread_rwlock_clockwrlock and
sem_clockwait functions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Mon, 24 Jun 2019 19:48:14 +0000 (19:48 +0000)]
nptl: Add POSIX-proposed pthread_mutex_clocklock
Add POSIX-proposed pthread_mutex_clocklock function that works like
pthread_mutex_timedlock but takes a clockid parameter to measure the
abstime parameter against.
* sysdeps/nptl/pthread.h: Add pthread_mutex_clocklock.
* nptl/DESIGN-systemtap-probes.txt: Likewise.
* nptl/pthread_mutex_timedlock.c
(__pthread_mutex_clocklock_common): Rename from
__pthread_mutex_timedlock and add clockid parameter. Pass this
parameter to lll_clocklock and lll_clocklock_elision in place of
CLOCK_REALTIME. (__pthread_mutex_clocklock): New function to add
LIBC_PROBE and validate clockid parameter before calling
__pthread_mutex_clocklock_common. (__pthread_mutex_timedlock): New
implementation to add LIBC_PROBE and calls
__pthread_mutex_clocklock_common passing CLOCK_REALTIME as the
clockid.
* nptl/Makefile: Add tst-mutex11.c.
* nptl/tst-abstime.c (th): Add tests for pthread_mutex_clocklock.
* nptl/tst-mutex11.c: New tests for passing invalid and unsupported
clockid parameters to pthread_mutex_clocklock.
* nptl/tst-mutex5.c (do_test_clock): Rename from do_test and take
clockid parameter to indicate which clock to be used. Call
pthread_mutex_timedlock or pthread_mutex_clocklock as appropriate.
(do_test): Call do_test_clock to separately test
pthread_mutex_timedlock, pthread_mutex_clocklock(CLOCK_REALTIME)
and pthread_mutex_clocklock(CLOCK_MONOTONIC).
* nptl/tst-mutex9.c: Likewise.
* nptl/Versions (GLIBC_2.30): Add pthread_mutex_clocklock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Mon, 24 Jun 2019 13:08:25 +0000 (13:08 +0000)]
nptl: Rename lll_timedlock to lll_clocklock and add clockid parameter
Rename lll_timedlock to lll_clocklock and add clockid
parameter to indicate the clock that the abstime parameter should
be measured against in preparation for adding
pthread_mutex_clocklock.
The name change mirrors the naming for the exposed pthread functions:
timed => absolute timeout measured against CLOCK_REALTIME (or clock
specified by attribute in the case of pthread_cond_timedwait.)
clock => absolute timeout measured against clock specified in preceding
parameter.
* sysdeps/nptl/lowlevellock.h (lll_clocklock): Rename from
lll_timedlock and add clockid parameter. (__lll_clocklock): Rename
from __lll_timedlock and add clockid parameter.
* sysdeps/unix/sysv/linux/sparc/lowlevellock.h (lll_clocklock):
Likewise.
* nptl/lll_timedlock_wait.c (__lll_clocklock_wait): Rename from
__lll_timedlock_wait and add clockid parameter. Use __clock_gettime
rather than __gettimeofday so that clockid can be used. This means
that conversion from struct timeval is no longer required.
* sysdeps/sparc/sparc32/lowlevellock.c (lll_clocklock_wait):
Likewise.
* sysdeps/sparc/sparc32/lll_timedlock_wait.c: Update comment to
refer to __lll_clocklock_wait rather than __lll_timedlock_wait.
* nptl/pthread_mutex_timedlock.c (lll_clocklock_elision): Rename
from lll_timedlock_elision, add clockid parameter and use
meaningful names for other parameters. (__pthread_mutex_timedlock):
Pass CLOCK_REALTIME where necessary to lll_clocklock and
lll_clocklock_elision.
* sysdeps/unix/sysv/linux/powerpc/lowlevellock.h
(lll_clocklock_elision): Rename from lll_timedlock_elision and add
clockid parameter. (__lll_clocklock_elision): Rename from
__lll_timedlock_elision and add clockid parameter.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/x86/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-timed.c
(__lll_lock_elision): Call __lll_clocklock_elision rather than
__lll_timedlock_elision. (EXTRAARG): Add clockid parameter.
(LLL_LOCK): Likewise.
* sysdeps/unix/sysv/linux/s390/elision-timed.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-timed.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Mon, 24 Jun 2019 13:05:27 +0000 (13:05 +0000)]
nptl: Add POSIX-proposed pthread_rwlock_clockrdlock & pthread_rwlock_clockwrlock
Add:
int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
and:
int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock,
clockid_t clockid,
const struct timespec *abstime)
which behave like pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock respectively, except they always measure
abstime against the supplied clockid. The functions currently support
CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other
clock is specified.
* sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and
pthread_wrlock_clockwrlock.
* nptl/Makefile: Build pthread_rwlock_clockrdlock.c and
pthread_rwlock_clockwrlock.c.
* nptl/pthread_rwlock_clockrdlock.c: Implement
pthread_rwlock_clockrdlock.
* nptl/pthread_rwlock_clockwrlock.c: Implement
pthread_rwlock_clockwrlock.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add
clockid parameter and verify that it indicates a supported clock on
entry so that we fail even if it doesn't end up being used. Pass
that clock on to futex_abstimed_wait when necessary.
(__pthread_rwlock_wrlock_full): Likewise.
* nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass
CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't
be used because there's no timeout.
* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass
CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't
be used because there is no timeout.
* nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock):
Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime
uses that clock.
* nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock):
Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime
uses that clock.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock timeout tests to match the existing
pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests.
* nptl/tst-rwlock14.c (do_test): Likewise.
* nptl/tst-rwlock6.c Invent verbose_printf macro, and use for
ancillary output throughout. (tf): Accept thread_args structure so
that rwlock, a clockid and function name can be passed to the
thread. (do_test_clock): Rename from do_test. Accept clockid
parameter to specify test clock. Use the magic clockid value of
CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and
pthread_rwlock_timedwrlock should be tested, otherwise pass the
specified clockid to pthread_rwlock_clockrdlock and
pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* nptl/tst-rwlock7.c: Likewise.
* nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept
thread_args structure so that the (now int) thread number, the
clockid and the function name can be passed to the thread.
(do_test_clock): Renamed from do_test. Pass the necessary
thread_args when creating the reader and writer threads. Use
xpthread_create and xpthread_join.
(do_test): Call do_test_clock to test each clockid in turn.
* manual/threads.texi: Add documentation for
pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Mon, 24 Jun 2019 12:39:02 +0000 (12:39 +0000)]
nptl: pthread_rwlock: Move timeout validation into _full functions
As recommended by the comments in the implementations of
pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock, let's move
the timeout validity checks into the corresponding pthread_rwlock_rdlock_full
and pthread_rwlock_wrlock_full functions. Since these functions may be
called with abstime == NULL, an extra check for that is necessary too.
* nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full):
Check validity of abstime parameter.
(__pthread_rwlock_rwlock_full): Likewise.
* nptl/pthread_rwlock_timedrdlock.c
* (pthread_rwlock_timedrdlock):
Remove check for validity of abstime parameter.
* nptl/pthread_rwlock_timedwrlock.c
* (pthread_rwlock_timedwrlock):
Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Fri, 21 Jun 2019 17:36:56 +0000 (17:36 +0000)]
nptl: Add POSIX-proposed pthread_cond_clockwait
Add:
int pthread_cond_clockwait (pthread_cond_t *cond,
pthread_mutex_t *mutex,
clockid_t clockid,
const struct timespec *abstime)
which behaves just like pthread_cond_timedwait except it always measures
abstime against the supplied clockid. Currently supports CLOCK_REALTIME
and
CLOCK_MONOTONIC and returns EINVAL if any other clock is specified.
Includes feedback from many others. This function was originally
proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group
preferred the new name.
* nptl/Makefile: Add tst-cond26 and tst-cond27
* nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait
* sysdeps/nptl/pthread.h: Likewise
* nptl/forward.c: Add __pthread_cond_clockwait
* nptl/forward.c: Likewise
* nptl/pthreadP.h: Likewise
* sysdeps/nptl/pthread-functions.h: Likewise
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add
clockid parameter and comment describing why we don't need to
check
its value. Use that value when calling
futex_abstimed_wait_cancelable rather than reading the clock
from
the flags. (__pthread_cond_wait): Pass unused clockid parameter.
(__pthread_cond_timedwait): Read clock from flags and pass it to
__pthread_cond_wait_common. (__pthread_cond_clockwait): Add new
function with weak alias from pthread_cond_clockwait.
* sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist
* (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30):
* Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-cond11.c (run_test): Support testing
pthread_cond_clockwait too by using a special magic
CLOCK_USE_ATTR_CLOCK value to determine whether to call
pthread_cond_timedwait or pthread_cond_clockwait. (do_test):
Pass
CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using
all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME.
* ntpl/tst-cond26.c: New test for passing unsupported and
* invalid
clocks to pthread_cond_clockwait.
* nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using
struct timespec and pthread_cond_clockwait.
* manual/threads.texi: Document pthread_cond_clockwait. The
* comment
was provided by Carlos O'Donell.
[1] https://sourceware.org/ml/libc-alpha/2015-07/msg00193.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Fri, 21 Jun 2019 15:57:41 +0000 (15:57 +0000)]
nptl: Add POSIX-proposed sem_clockwait
Add:
int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec
*abstime)
which behaves just like sem_timedwait, but measures abstime against the
specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC
and sets errno == EINVAL if any other clock is specified.
* nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add
clockid parameters to indicate the clock which abstime should be
measured against.
* nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c
(__new_sem_wait): Pass CLOCK_REALTIME as clockid to
__new_sem_wait_slow.
* nptl/sem_clockwait.c: New file to implement sem_clockwait based
on sem_timedwait.c.
* nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for
sem_clockwait.c to match those used for sem_timedwait.c.
* sysdeps/pthread/semaphore.h: Add sem_clockwait.
* nptl/Versions (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-sem17.c: Add new test for passing invalid clock to
sem_clockwait.
* nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait
tests to also test sem_clockwait.
* manual/threads.texi: Document sem_clockwait.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Fri, 21 Jun 2019 14:53:40 +0000 (14:53 +0000)]
nptl: Add clockid parameter to futex timed wait calls
In preparation for adding POSIX clockwait variants of timedwait functions,
add a clockid_t parameter to futex_abstimed_wait functions and pass
CLOCK_REALTIME from all callers for the time being.
Replace lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset
which takes a clockid_t parameter rather than the magic clockbit.
* sysdeps/nptl/lowlevellock-futex.h,
sysdeps/unix/sysv/linux/lowlevellock-futex.h: Replace
lll_futex_timed_wait_bitset with lll_futex_clock_wait_bitset that
takes a clockid rather than a special clockbit.
* sysdeps/nptl/lowlevellock-futex.h: Add
lll_futex_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling lll_futex_clock_wait_bitset.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h
(futex_abstimed_wait, futex_abstimed_wait_cancelable): Add
clockid_t parameter to indicate which clock the absolute time
passed should be measured against. Pass that clockid onto
lll_futex_clock_wait_bitset. Add invalid clock as reason for
returning -EINVAL.
* sysdeps/nptl/futex-internal.h,
sysdeps/unix/sysv/linux/futex-internal.h: Introduce
futex_abstimed_supported_clockid so that client functions can check
whether their clockid parameter is valid even if they don't
ultimately end up calling futex_abstimed_wait.
* nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Remove
code to calculate relative timeout for
__PTHREAD_COND_CLOCK_MONOTONIC_MASK and just pass CLOCK_MONOTONIC
or CLOCK_REALTIME as required to futex_abstimed_wait_cancelable.
* nptl/pthread_rwlock_common (__pthread_rwlock_rdlock_full)
(__pthread_wrlock_full), nptl/sem_waitcommon (do_futex_wait): Pass
additional CLOCK_REALTIME to futex_abstimed_wait_cancelable.
* nptl/pthread_mutex_timedlock.c (__pthread_mutex_timedlock):
Switch to lll_futex_clock_wait_bitset and pass CLOCK_REALTIME
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Adhemerval Zanella [Tue, 18 Jun 2019 17:09:09 +0000 (14:09 -0300)]
posix: Fix large mmap64 offset for mips64n32 (BZ#24699)
The fix for BZ#21270 (commit
158d5fa0e19) added a mask to avoid offset larger
than 1^44 to be used along __NR_mmap2. However mips64n32 users __NR_mmap,
as mips64n64, but still defines off_t as old non-LFS type (other ILP32, such
x32, defines off_t being equal to off64_t). This leads to use the same
mask meant only for __NR_mmap2 call for __NR_mmap, thus limiting the maximum
offset it can use with mmap64.
This patch fixes by setting the high mask only for __NR_mmap2 usage. The
posix/tst-mmap-offset.c already tests it and also fails for mips64n32. The
patch also change the test to check for an arch-specific header that defines
the maximum supported offset.
Checked on x86_64-linux-gnu, i686-linux-gnu, and I also tests tst-mmap-offset
on qemu simulated mips64 with kernel 3.2.0 kernel for both mips-linux-gnu and
mips64-n32-linux-gnu.
[BZ #24699]
* posix/tst-mmap-offset.c: Mention BZ #24699.
(do_test_bz21270): Rename to do_test_large_offset and use
mmap64_maximum_offset to check for maximum expected offset value.
* sysdeps/generic/mmap_info.h: New file.
* sysdeps/unix/sysv/linux/mips/mmap_info.h: Likewise.
* sysdeps/unix/sysv/linux/mmap64.c (MMAP_OFF_HIGH_MASK): Define iff
__NR_mmap2 is used.
DJ Delorie [Fri, 28 Jun 2019 23:30:00 +0000 (18:30 -0500)]
nss_db: fix endent wrt NULL mappings [BZ #24695] [BZ #24696]
nss_db allows for getpwent et al to be called without a set*ent,
but it only works once. After the last get*ent a set*ent is
required to restart, because the end*ent did not properly reset
the module. Resetting it to NULL allows for a proper restart.
If the database doesn't exist, however, end*ent erroniously called
munmap which set errno.
The test case runs "makedb" inside the testroot, so needs selinux
DSOs installed.
Szabolcs Nagy [Tue, 9 Jul 2019 11:11:39 +0000 (12:11 +0100)]
aarch64: simplify the DT_AARCH64_VARIANT_PCS handling code
Remove unnecessary variant_pcs field: the dynamic tag can be checked
directly.
* sysdeps/aarch64/dl-machine.h (elf_machine_runtime_setup): Remove the
DT_AARCH64_VARIANT_PCS check.
(elf_machine_lazy_rel): Use l_info[DT_AARCH64 (VARIANT_PCS)].
* sysdeps/aarch64/linkmap.h (struct link_map_machine): Remove
variant_pcs.
Andreas Schwab [Tue, 9 Jul 2019 14:44:02 +0000 (16:44 +0200)]
Don't declare __malloc_check_init in <malloc.h> (bug 23352)
The function was never part of the malloc API.
Mao Han [Wed, 10 Jul 2019 06:09:51 +0000 (14:09 +0800)]
locale/tst-locale-locpath: Fix arguments passing
The arguments passed by Makefile are missing match with the arguments
taken by locale/tst-locale-locpath.sh. Without this patch
cross-test-ssh.sh will be called twice in a single command while
doing the make check test wish ssh test wrapper.
* locale/Makefile: Fix tst-locale-locpath arguments passing.
Paul A. Clarke [Mon, 8 Jul 2019 22:06:19 +0000 (17:06 -0500)]
[powerpc] fenv_libc.h: protect use of __builtin_cpu_supports
Using __builtin_cpu_supports() requires support in GCC and Glibc.
My recent patch to fenv_libc.h added an unprotected use of
__builtin_cpu_supports(). Compilation of Glibc itself will fail
with a sufficiently new GCC and sufficiently old Glibc:
../sysdeps/powerpc/fpu/fegetexcept.c: In function ‘__fegetexcept’:
../sysdeps/powerpc/fpu/fenv_libc.h:52:20: error: builtin ‘__builtin_cpu_supports’ needs GLIBC (2.23 and newer) that exports hardware capability bits [-Werror]
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Fixes
3db85a9814784a74536a1f0e7b7ddbfef7dc84bb.
DJ Delorie [Wed, 19 Jun 2019 21:07:41 +0000 (17:07 -0400)]
nftw: fill in stat buf for dangling links [BZ #23501]
As per Austin Group interpretation, "the object" wrt a
dangling symlink is the symlink itself, despite FTW_PHYS.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
DJ Delorie [Mon, 8 Jul 2019 21:10:52 +0000 (17:10 -0400)]
NEWS: clarify copy_file_range
Minor tweak to clarify what applications must do.
Adhemerval Zanella [Tue, 19 Mar 2019 12:22:21 +0000 (12:22 +0000)]
powerpc: refactor logb{f,l}
The power7 logb implementation does not show a performance gain on
ISA 2.07+ chips with faster floating-point to GRP instructions
(currently POWER8 and POWER9).
This patch moves the POWER7 implementation to generic one and enables
it for POWER7. It also add some cleanup to use inline floating-point
number instead of define them using static const.
The performance difference is for POWER9:
- Without patch:
"logb": {
"subnormal": {
"duration": 4.99202e+09,
"iterations": 8.83662e+08,
"max": 75.194,
"min": 5.501,
"mean": 5.64925
},
"normal": {
"duration": 4.97063e+09,
"iterations": 9.97094e+08,
"max": 46.489,
"min": 4.956,
"mean": 4.98512
}
}
- With patch:
"logb": {
"subnormal": {
"duration": 4.97226e+09,
"iterations": 9.92036e+08,
"max": 77.209,
"min": 4.892,
"mean": 5.01218
},
"normal": {
"duration": 4.96192e+09,
"iterations": 1.07545e+09,
"max": 12.361,
"min": 4.593,
"mean": 4.61382
}
}
The ifunc implementation is also enabled only for powerpc64.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/power7/fpu/s_logb.c: Move to ...
* sysdeps/powerpc/fpu/s_logb.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Move to ...
* sysdeps/powerpc/fpu/s_logbf.c: ... here. Use inline FP constants.
* sysdeps/powerpc/power7/fpu/s_logbl.c: Move to ...
* sysdeps/powerpc/fpu/s_logbl.c: ... here. Use inline FP constants.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbl-power7.c:
Adjust implementation path.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_log* objects.
(CFLAGS-s_logbf-power7.c, CFLAGS-s_logbl-power7.c,
CFLAGS-s_logb-power7.c): New fule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logb.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-power7.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-power7.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl-ppc64.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbl.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_logbl.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logb.c: Remove file.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbf.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_logbl.c: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Thu, 28 Mar 2019 19:14:04 +0000 (19:14 +0000)]
math: Use wordsize-64 version for s_logb
- The resulting binary difference on 32 bits architecture is
minimum. On i686-linux-gnu (with architecture optimization
routine removed) there is no different using logb benchtests
- It helps wordsize-64 architectures that use ldbl-opt.
- It add some code simplification with reduction of duplicated
implementations.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Move to ...
* sysdeps/ieee754/dbl-64/s_logb.c: ... here. Add work around for
powerpc32 integer 0 converting to -0.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Thu, 14 Mar 2019 11:55:04 +0000 (11:55 +0000)]
benchtests: Add logb{f} benchmark
* benchtests/Makefile (bench-math): Add logb.
* benchtests/logb-inputs: New file.
* benchtests/logbf-inputs: New file.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Mon, 18 Mar 2019 20:18:49 +0000 (20:18 +0000)]
powerpc: Refactor modf{f}
The modf{f} optimization is not an optimization for ISA 2.07+. This
patch move the IFUNC for powerpc64 only, move the power5+ to generic
location, and include the generic implementation for ISA 2.07+.
The performance changes are based on modf benchtests:
* POWER9 - ppc64
"modf": {
"": {
"duration": 4.97057e+09,
"iterations": 1.00688e+09,
"max": 28.76,
"min": 4.912,
"mean": 4.9366
}
}
* POWER9 - power5+
"modf": {
"": {
"duration": 4.98291e+09,
"iterations": 9.32818e+08,
"max": 15.058,
"min": 5.107,
"mean": 5.34178
}
}
* POWER8 - ppc64
"modf": {
"": {
"duration": 5.05329e+09,
"iterations": 8.38814e+08,
"max": 518.051,
"min": 5.79,
"mean": 6.02433
}
}
* POWER8 - power5+
"modf": {
"": {
"duration": 5.05573e+09,
"iterations": 8.35254e+08,
"max": 63.141,
"min": 5.873,
"mean": 6.05293
}
}
* POWER7 - ppc64
"modf": {
"": {
"duration": 4.89818e+09,
"iterations": 1.08408e+09,
"max": 57.556,
"min": 3.953,
"mean": 4.51827
}
}
* POWER7 - power5+
"modf": {
"": {
"duration": 4.83789e+09,
"iterations": 1.33409e+09,
"max": 46.608,
"min": 2.224,
"mean": 3.62636
}
}
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/power5+/fpu/s_modf.c: Move to ...
* sysdeps/powerpc/fpu/s_modf.c: ... here. Add ISA 2.07 optimization.
* sysdeps/powerpc/power5+/fpu/s_modff.c: Move to ...
* sysdeps/powerpc/fpu/s_modff.c: ... here. Add ISA 2.07 optimization.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf-power5+.c:
Adjust include.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modff-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile (sysdep_calls,
sysdep_routines): Add s_modf* objects.
(CFLAGS-s_modf-power5+.c, CFLAGS-s_modff-power5+.c,
CFLAGS-s_modf-ppc64.c, CFLAGS-s_modff-ppc64.c): New rule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-power5+.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf-power5+.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-power5+.c: Movo
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf-power5+.c: Move
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff-power5+.c: Move
to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff-power5+.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff-ppc64.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff-ppc64.c:
... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_modff.c: ... here.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Mon, 18 Mar 2019 17:40:50 +0000 (17:40 +0000)]
powerpc: hypot refactor and optimization
The powerpc hypot is slight optimized by:
- Commit
8df4e219e43, both isnan and isinf are always inlined and thus
the check TEST_INF_NAN does not make sense anymore. The generic
check for POWER7 should be faster on all powerpc configuration.
- The redundant check 'y > two60factor && (x / y) > two60' is removed.
Both changes leads to unrequired ifunc especialization for power7 and
thus they are removed. Finally The code is also cleanup a bit by inlining
the constants floating points.
The performance changes using the hypot benchtests are:
- POWER9 without patch:
"hypot": {
"overflow": {
"duration": 4.98585e+09,
"iterations": 4.84932e+08,
"max": 46.551,
"min": 10.229,
"mean": 10.2815
},
"higher_two500": {
"duration": 5.00192e+09,
"iterations": 4.24843e+08,
"max": 33.319,
"min": 11.606,
"mean": 11.7736
},
"subnormal": {
"duration": 5.0075e+09,
"iterations": 4.06792e+08,
"max": 22.178,
"min": 12.15,
"mean": 12.3097
},
"less_two500": {
"duration": 5.00685e+09,
"iterations": 4.08772e+08,
"max": 22.784,
"min": 12.052,
"mean": 12.2485
},
"default": {
"duration": 5.06002e+09,
"iterations": 4.09894e+08,
"max": 20.648,
"min": 11.874,
"mean": 12.3447
}
}
- POWER9 with patch:
"hypot": {
"overflow": {
"duration": 4.91848e+09,
"iterations": 7.28039e+08,
"max": 47.958,
"min": 6.436,
"mean": 6.75579
},
"higher_two500": {
"duration": 4.9359e+09,
"iterations": 6.63376e+08,
"max": 20.783,
"min": 7.321,
"mean": 7.44057
},
"subnormal": {
"duration": 4.9479e+09,
"iterations": 6.19772e+08,
"max": 18.856,
"min": 7.817,
"mean": 7.98341
},
"less_two500": {
"duration": 4.94275e+09,
"iterations": 6.3889e+08,
"max": 17.452,
"min": 7.597,
"mean": 7.73647
},
"default": {
"duration": 5.03645e+09,
"iterations": 5.70718e+08,
"max": 18.904,
"min": 8.55,
"mean": 8.82476
}
}
- POWER7 without patch
"hypot": {
"overflow": {
"duration": 4.86637e+09,
"iterations": 6.43196e+08,
"max": 53.958,
"min": 7.328,
"mean": 7.56592
},
"higher_two500": {
"duration": 4.99842e+09,
"iterations": 3.11012e+08,
"max": 78.227,
"min": 15.696,
"mean": 16.0715
},
"subnormal": {
"duration": 4.99841e+09,
"iterations": 3.08935e+08,
"max": 51.392,
"min": 15.983,
"mean": 16.1795
},
"less_two500": {
"duration": 5.00108e+09,
"iterations": 2.99464e+08,
"max": 73.247,
"min": 16.416,
"mean": 16.7001
},
"default": {
"duration": 5.04645e+09,
"iterations": 3.52608e+08,
"max": 70.073,
"min": 13.38,
"mean": 14.3118
}
}
- POWER7 with patch
"hypot": {
"overflow": {
"duration": 4.80785e+09,
"iterations": 8.00001e+08,
"max": 66.262,
"min": 5.888,
"mean": 6.00981
},
"higher_two500": {
"duration": 4.9859e+09,
"iterations": 3.39449e+08,
"max": 5148.44,
"min": 14.539,
"mean": 14.6882
},
"subnormal": {
"duration": 4.9905e+09,
"iterations": 3.28874e+08,
"max": 64.905,
"min": 14.971,
"mean": 15.1745
},
"less_two500": {
"duration": 4.99494e+09,
"iterations": 3.19755e+08,
"max": 103.696,
"min": 14.972,
"mean": 15.6211
},
"default": {
"duration": 5.03951e+09,
"iterations": 4.02502e+08,
"max": 61.008,
"min": 12.368,
"mean": 12.5205
}
}
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/e_hypot.c (two60, two500, two600, two1022,
twoM500, twoM600, two60factor, pdnum): Remove.
(TEST_INFO_NAN, GET_TW0_HIGH_WORD): Remove macro.
(__ieee754_hypot): Replace static variables with inline definition,
remove ununsed branches.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove e_hypot-* objects.
(CFLAGS-e_hypot-power7.c, CFLAGS-e_hypotf-power7.c): Remove rule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot-power7.c: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypot.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf-power7.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_hypotf.c: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Mon, 11 Mar 2019 17:01:11 +0000 (17:01 +0000)]
benchtests: hypot benchmark
Inputs are based on argument reductions from generic and powerpc
implementation.
* benchtests/Makefile (bench-math): Add hypot.
* benchtests/hypot-inputs: New file.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Vincent Chen [Mon, 8 Jul 2019 18:56:43 +0000 (15:56 -0300)]
dl-vdso: Add LINUX_4 HASH CODE to support nds32 vdso mechanism
* sysdeps/unix/sysv/linux/dl-vdso.h: Add LINUX_4
HASH code to support nds32 vdso mechanism.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Andreas Schwab [Wed, 3 Jul 2019 11:52:49 +0000 (13:52 +0200)]
riscv: restore ABI compatibility (bug 24484)
The contents of the dynamic section are part of the ABI, thus
DL_RO_DYN_SECTION cannot be changed.
Szabolcs Nagy [Tue, 23 Apr 2019 14:59:34 +0000 (15:59 +0100)]
aarch64: new ifunc resolver ABI
Passing a second argument to the ifunc resolver allows accessing
AT_HWCAP2 values from the resolver. AArch64 will start using AT_HWCAP2
on linux because for ilp32 to remain compatible with lp64 ABI no more
than 32bit hwcap flags can be in AT_HWCAP which is already used up.
Currently the relocation ordering logic does not guarantee that ifunc
resolvers can call libc apis or access libc objects, so only the
resolver arguments and runtime environment dependent instructions can
be used to do the dispatch (this affects ifunc resolvers outside of
the libc).
Since ifunc resolver is target specific and only supposed to be
called by the dynamic linker, the call ABI can be changed in a
backward compatible way:
Old call ABI passed hwcap as uint64_t, new abi sets the
_IFUNC_ARG_HWCAP flag in the hwcap and passes a second argument
that's a pointer to an extendible struct. A resolver has to check
the _IFUNC_ARG_HWCAP flag before accessing the second argument.
The new sys/ifunc.h installed header has the definitions for the
new ABI, everything is in the implementation reserved namespace.
An alternative approach is to try to support extern calls from ifunc
resolvers such as getauxval, but that seems non-trivial
https://sourceware.org/ml/libc-alpha/2017-01/msg00468.html
* sysdeps/aarch64/Makefile: Install sys/ifunc.h and add tests.
* sysdeps/aarch64/dl-irel.h (elf_ifunc_invoke): Update to new ABI.
* sysdeps/aarch64/sys/ifunc.h: New file.
* sysdeps/aarch64/tst-ifunc-arg-1.c: New file.
* sysdeps/aarch64/tst-ifunc-arg-2.c: New file.
Florian Weimer [Tue, 2 Jul 2019 13:12:20 +0000 (15:12 +0200)]
nptl: Remove vfork IFUNC-based forwarder from libpthread [BZ #20188]
With commit
f0b2132b35248c1f4a80f62a2c38cddcc802aa8c ("ld.so:
Support moving versioned symbols between sonames [BZ #24741]"), the
dynamic linker will find the definition of vfork in libc and binds
a vfork reference to that symbol, even if the soname in the version
reference says that the symbol should be located in libpthread.
As a result, the forwarder (whether it's IFUNC-based or a duplicate
of the libc implementation) is no longer necessary.
On older architectures, a placeholder symbol is required, to make sure
that the GLIBC_2.1.2 symbol version does not go away, or is turned in
to a weak symbol definition by the link editor. (The symbol version
needs to preserved so that the symbol coverage check in
elf/dl-version.c does not fail for old binaries.)
mips32 is an outlier: It defined __vfork@@GLIBC_2.2, but the
baseline is GLIBC_2.0. Since there are other @@GLIBC_2.2 symbols,
the placeholder symbol is not needed there.
Florian Weimer [Tue, 2 Jul 2019 14:45:52 +0000 (16:45 +0200)]
malloc: Add nptl, htl dependency for the subdirectory [BZ #24757]
memusagestat may indirectly link against libpthread. The built
libpthread should be used, but that is only possible if it has been
built before the malloc programs.
Stefan Liebler [Tue, 2 Jul 2019 12:07:44 +0000 (14:07 +0200)]
Fix build warnings in resolv/res_send.c
This patch fixes the gcc warnings seen with gcc 9 -march>=z13 on s390x:
res_send.c: In function ‘__res_context_send’:
res_send.c:498:7: error: ‘resplen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
498 | if (n == 0 && (buf2 == NULL || *resplen2 == 0))
| ^
In this case send_vc is inlined into __res_context_send
and the maybe uninitialized resplen belongs to the one in send_vc.
In send_vc there is already a DIAG_IGNORE_NEEDS_COMMENT (5, "-Wmaybe-uninitialized")
and a comment which explains that this is a false-positive.
Note that resplen is used as return value.
This patch adds a further DIAG_IGNORE_NEEDS_COMMENT around the declaration of n
in __res_context_send and the comparison after n was set to the return value of send_vc.
ChangeLog:
* resolv/res_send.c (__res_context_send): Disable maybe-uninitialized
warning.
Florian Weimer [Tue, 2 Jul 2019 11:14:58 +0000 (13:14 +0200)]
build-many-glibcs.py: Add v4t variant for arm-linux-gnueabi
H.J. Lu [Mon, 1 Jul 2019 19:23:10 +0000 (12:23 -0700)]
Call _dl_open_check after relocation [BZ #24259]
This is a workaround for [BZ #20839] which doesn't remove the NODELETE
object when _dl_open_check throws an exception. Move it after relocation
in dl_open_worker to avoid leaving the NODELETE object mapped without
relocation.
[BZ #24259]
* elf/dl-open.c (dl_open_worker): Call _dl_open_check after
relocation.
* sysdeps/x86/Makefile (tests): Add tst-cet-legacy-5a,
tst-cet-legacy-5b, tst-cet-legacy-6a and tst-cet-legacy-6b.
(modules-names): Add tst-cet-legacy-mod-5a, tst-cet-legacy-mod-5b,
tst-cet-legacy-mod-5c, tst-cet-legacy-mod-6a, tst-cet-legacy-mod-6b
and tst-cet-legacy-mod-6c.
(CFLAGS-tst-cet-legacy-5a.c): New.
(CFLAGS-tst-cet-legacy-5b.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-5a.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-5b.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-5c.c): Likewise.
(CFLAGS-tst-cet-legacy-6a.c): Likewise.
(CFLAGS-tst-cet-legacy-6b.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-6a.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-6b.c): Likewise.
(CFLAGS-tst-cet-legacy-mod-6c.c): Likewise.
($(objpfx)tst-cet-legacy-5a): Likewise.
($(objpfx)tst-cet-legacy-5a.out): Likewise.
($(objpfx)tst-cet-legacy-mod-5a.so): Likewise.
($(objpfx)tst-cet-legacy-mod-5b.so): Likewise.
($(objpfx)tst-cet-legacy-5b): Likewise.
($(objpfx)tst-cet-legacy-5b.out): Likewise.
(tst-cet-legacy-5b-ENV): Likewise.
($(objpfx)tst-cet-legacy-6a): Likewise.
($(objpfx)tst-cet-legacy-6a.out): Likewise.
($(objpfx)tst-cet-legacy-mod-6a.so): Likewise.
($(objpfx)tst-cet-legacy-mod-6b.so): Likewise.
($(objpfx)tst-cet-legacy-6b): Likewise.
($(objpfx)tst-cet-legacy-6b.out): Likewise.
(tst-cet-legacy-6b-ENV): Likewise.
* sysdeps/x86/tst-cet-legacy-5.c: New file.
* sysdeps/x86/tst-cet-legacy-5a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-5b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-6.c: Likewise.
* sysdeps/x86/tst-cet-legacy-6a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-6b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-5.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-5a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-5b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-5c.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-6.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-6a.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-6b.c: Likewise.
* sysdeps/x86/tst-cet-legacy-mod-6c.c: Likewise.
Paul A. Clarke [Thu, 20 Jun 2019 16:57:18 +0000 (11:57 -0500)]
powerpc: Use faster means to access FPSCR when possible in some cases
Using 'mffs' instruction to read the Floating Point Status Control Register
(FPSCR) can force a processor flush in some cases, with undesirable
performance impact. If the values of the bits in the FPSCR which force the
flush are not needed, an instruction that is new to POWER9 (ISA version 3.0),
'mffsl' can be used instead.
Cases included: get_rounding_mode, fegetround, fegetmode, fegetexcept.
* sysdeps/powerpc/bits/fenvinline.h (__fegetround): Use
__fegetround_ISA300() or __fegetround_ISA2() as appropriate.
(__fegetround_ISA300) New.
(__fegetround_ISA2) New.
* sysdeps/powerpc/fpu_control.h (IS_ISA300): New.
(_FPU_MFFS): Move implementation...
(_FPU_GETCW): Here.
(_FPU_MFFSL): Move implementation....
(_FPU_GET_RC_ISA300): Here. New.
(_FPU_GET_RC): Use _FPU_GET_RC_ISA300() or _FPU_GETCW() as appropriate.
* sysdeps/powerpc/fpu/fenv_libc.h (fegetenv_status_ISA300): New.
(fegetenv_status): New.
* sysdeps/powerpc/fpu/fegetmode.c (fegetmode): Use fegetenv_status()
instead of fegetenv_register().
* sysdeps/powerpc/fpu/fegetexcept.c (__fegetexcept): Likewise.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Wilco Dijkstra [Fri, 28 Jun 2019 12:42:36 +0000 (13:42 +0100)]
Further improve string bench timing
Further improve the timings of the string benchmarks. Ensure most take
between 1 and 4 seconds to improve accuracy. Overall time taken increases
by 35%. Tested on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* benchtests/bench-math-inlines.c: Increase iterations.
* benchtests/bench-memcmp.c: Likewise.
* benchtests/bench-rawmemchr.c: Likewise.
* benchtests/bench-strcmp.c: Likewise.
* benchtests/bench-strcpy_chk.c: Likewise.
* benchtests/bench-string.h (INNER_LOOP_ITERS8): Add define.
(INNER_LOOP_ITERS_MEDIUM): Increase iterations.
(INNER_LOOP_ITERS_SMALL): Likewise.
* benchtests/bench-strncat.c: Increase iterations.
* benchtests/bench-strncmp.c: Increase iterations.
* benchtests/bench-strncpy.c: Reduce iterations for wide strings.
* benchtests/bench-strrchr.c: Increase iterations.
* benchtests/bench-strstr.c: Keep iterations unchanged.
* benchtests/bench-strtod.c: Increase iterations.
Anton Youdkevitch [Fri, 28 Jun 2019 12:38:07 +0000 (13:38 +0100)]
Bump up the runtime for "short" benchmarks
Some benchmarks with a very short runtime show significantly
different results across runs on Aarch64 - up to tens of percents.
Increasing the runtime to 100ms+ makes the deviation under 5%.
Tested on Aarch64 and x86-64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* benchtests/bench-memccpy.c: Replace INNER_LOOP_ITERS
with INNER_LOOP_ITERS_LARGE.
* benchtests/bench-memchr.c: Likewise.
* benchtests/bench-rawmemchr.c: Likewise.
* benchtests/bench-strcat.c: Likewise.
* benchtests/bench-strchr.c: Likewise.
* benchtests/bench-string.h: Likewise.
* benchtests/bench-strlen.c: Likewise.
* benchtests/bench-strncpy.c: Likewise.
* benchtests/bench-strnlen.c: Likewise.
Florian Weimer [Fri, 28 Jun 2019 08:48:48 +0000 (10:48 +0200)]
Linux: Use mmap instead of malloc in dirent/tst-getdents64
malloc dirties the entire allocated memory region due to M_PERTURB
in the test harness.
Tobias Klauser [Fri, 28 Jun 2019 11:46:00 +0000 (08:46 -0300)]
Replace PREPARE_VERSION macro with inline function
* sysdeps/unix/sysv/linux/dl-vdso.h (PREPARE_VERSION): Remove macro.
(prepare_version_base): New helper inline function.
(prepare_version): New macro replacing PREPARE_VERSION.
(PREPARE_VERSION_KNOWN): Use prepare_version instead of PREPARE_VERSION.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Fri, 28 Jun 2019 08:12:50 +0000 (10:12 +0200)]
ld.so: Support moving versioned symbols between sonames [BZ #24741]
This change should be fully backwards-compatible because the old
code aborted the load if a soname mismatch was encountered
(instead of searching further for a matching symbol). This means
that no different symbols are found.
The soname check was explicitly disabled for the skip_map != NULL
case. However, this only happens with dl(v)sym and RTLD_NEXT,
and those lookups do not come with a verneed entry that could be used
for the check.
The error check was already explicitly disabled for the skip_map !=
NULL case, that is, when dl(v)sym was called with RTLD_NEXT. But
_dl_vsym always sets filename in the struct r_found_version argument
to NULL, so the check was not active anyway. This means that
symbol lookup results for the skip_map != NULL case do not change,
either.
Florian Weimer [Fri, 28 Jun 2019 08:15:30 +0000 (10:15 +0200)]
support: Add xdlvsym function
Florian Weimer [Fri, 28 Jun 2019 07:39:21 +0000 (09:39 +0200)]
io: Remove copy_file_range emulation [BZ #24744]
The kernel is evolving this interface (e.g., removal of the
restriction on cross-device copies), and keeping up with that
is difficult. Applications which need the function should
run kernels which support the system call instead of relying on
the imperfect glibc emulation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Gabriel F. T. Gomes [Thu, 27 Jun 2019 20:43:44 +0000 (17:43 -0300)]
Prepare vfprintf to use __printf_fp/__printf_fphex with float128 arg
On powerpc64le, long double can currently take two formats: the same as
double (-mlong-double-64) or IBM Extended Precision (default with
-mlong-double-128 or explicitly with -mabi=ibmlongdouble). The internal
implementation of printf-like functions is aware of these possibilities
and properly parses floating-point values from the variable arguments,
before making calls to __printf_fp and __printf_fphex. These functions
are also aware of the format possibilities and know how to convert both
formats to string.
When library support for TS 18661-3 was added to glibc, __printf_fp and
__printf_fphex were extended with support for an additional type
(__float128/_Float128) with a different format (binary128). Now that
powerpc64le is getting support for its third long double format, and
taking into account that this format is the same as the format of
__float128/_Float128, this patch extends __vfprintf_internal to properly
call __printf_fp and __printf_fphex with this new format.
Tested for powerpc64le (with additional patches to actually enable the
use of these preparations) and for x86_64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Thu, 27 Jun 2019 13:08:40 +0000 (15:08 +0200)]
Linux: Adjust gedents64 buffer size to int range [BZ #24740]
The kernel interface uses type unsigned int, but there is an
internal conversion to int, so INT_MAX is the correct limit.
Part of the buffer will always be unused, but this is not a
problem. Such huge buffers do not occur in practice anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
H.J. Lu [Wed, 26 Jun 2019 22:07:18 +0000 (15:07 -0700)]
x86: Add sysdeps/x86/dl-lookupcfg.h
Since sysdeps/i386/dl-lookupcfg.h and sysdeps/x86_64/dl-lookupcfg.h are
identical, we can replace them with sysdeps/x86/dl-lookupcfg.h.
* sysdeps/i386/dl-lookupcfg.h: Moved to ...
* sysdeps/x86/dl-lookupcfg.h: Here.
* sysdeps/x86_64/dl-lookupcfg.h: Removed.
Adhemerval Zanella [Wed, 13 Mar 2019 17:55:03 +0000 (17:55 +0000)]
powerpc: Use generic e_expf
Generic implementation is faster on both power8 and power9:
POWER9:
- sysdeps/ieee754/flt-32/e_expf.c
"expf": {
"workload-spec2017.wrf": {
"duration": 5.1236e+09,
"iterations": 7.53344e+08,
"reciprocal-throughput": 5.9436,
"latency": 7.65869,
"max-throughput": 1.68248e+08,
"min-throughput": 1.30571e+08
}
}
- sysdeps/powerpc/powerpc64/power8/fpu/e_expf.S
"expf": {
"workload-spec2017.wrf": {
"duration": 5.14429e+09,
"iterations": 5.29248e+08,
"reciprocal-throughput": 8.05372,
"latency": 11.3863,
"max-throughput": 1.24166e+08,
"min-throughput": 8.78249e+07
}
}
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove e_expf-power8 and expf-ppc64.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-power8.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/e_expf.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
Adhemerval Zanella [Fri, 22 Mar 2019 16:47:34 +0000 (16:47 +0000)]
powerpc: Refactor powerpc32 lround/lroundf/llround/llroundf
This patches consolidates all the powerpc llround{f} implementations on
the generic sysdeps/powerpc/powerpc32/fpu/s_llround{f}.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc32/fpu/Makefile
[$(subdir) == math] (CFLAGS-s_lround.c): New rule.
* sysdeps/powerpc/powerpc32/fpu/s_llround.c (__llround): Add power5+
and fctidz optimization.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_lround.c: New file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(CFLAGS-s_llround-power6.c, CFLAGS-s_llround-power5+.c,
CFLAGS-s_llround-ppc32.c, CFLAGS-s_lround-ppc32.c,
CFLAGS-s_lround-power5+.c): New rule.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-power5+.c:
New file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-power6.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround-power5+.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-power5+.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-power6.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround-power5+.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Likewise.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llroundf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabriel@inconstante.eti.br>
Vincent Chen [Wed, 26 Jun 2019 09:30:11 +0000 (17:30 +0800)]
Linux: Add nds32 specific syscalls to syscall-names.list
The nds32 creates two specific syscalls, udftrap and fp_udfiex_crtl, in
kernel v5.0 and v5.2, respectively. Add these two syscalls to
syscall-names.list.
Stefan Liebler [Wed, 26 Jun 2019 10:29:50 +0000 (12:29 +0200)]
Fix build warnings in nptl/tst-eintr1.c
This patch fixes the gcc warnings seen with gcc 9.1 -O3 on s390x:
tst-eintr1.c: In function ‘tf1’:
tst-eintr1.c:46:1: error: no return statement in function returning non-void [-Werror=return-type]
46 | }
| ^
tst-eintr1.c: In function ‘do_test’:
tst-eintr1.c:57:17: error: unused variable ‘th’ [-Werror=unused-variable]
57 | pthread_t th = xpthread_create (NULL, tf1, NULL);
| ^~
ChangeLog:
* nptl/tst-eintr1.c (tf1): Add return statement.
(do_test): Remove unused th variable.
Stefan Liebler [Wed, 26 Jun 2019 06:34:25 +0000 (08:34 +0200)]
Fix build warnings in locale/programs/ld-ctype.c
This patch fixes the gcc warnings seen with gcc 9 -march>=z13 on s390x:
programs/ld-ctype.c: In function ‘ctype_read’:
programs/ld-ctype.c:1392:13: error: ‘wch’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1392 | uint32_t wch;
| ^~~
programs/ld-ctype.c:1401:7: error: ‘seq’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
1401 | if (seq != NULL && seq->nbytes == 1)
| ^
programs/ld-ctype.c:1391:20: note: ‘seq’ was declared here
1391 | struct charseq *seq;
| ^~~
Both seq and wch are uninitialized if get_character fails.
Thus we are now returning with an error.
ChangeLog:
* locale/programs/ld-ctype.c (charclass_symbolic_ellipsis):
Return error if get_character fails.
Stefan Liebler [Tue, 25 Jun 2019 13:14:17 +0000 (15:14 +0200)]
S390: Regenerate ULPs.
The update is needed for builds with -O3 and -march>=z13.
ChangeLog:
* sysdeps/s390/fpu/libm-test-ulps: Regenerated.
Rafal Luzynski [Mon, 24 Jun 2019 20:04:41 +0000 (22:04 +0200)]
szl_PL locale: Fix a typo in the previous commit (bug 24652).
The Unicode sequences in the format <Uxxxx> should be used instead of
non-ASCII characters.
Reported by Piotr Drąg:
https://sourceware.org/bugzilla/show_bug.cgi?id=24652#c8
[BZ #24652]
* localedata/locales/szl_PL (day): Use the correct Unicode
sequences instead of non-ASCII characters.
Grzegorz Kulik [Tue, 18 Jun 2019 16:41:19 +0000 (18:41 +0200)]
szl_PL locale: Spelling corrections (bug 24652).
This commit also provides the correct month names in both nominative
and genitive case for Silesian language, as required by the fix for
the bug 10871.
[BZ #24652]
* localedata/locales/szl_PL (abday): Spelling corrections.
(day): Likewise.
(abmon): Likewise.
(mon): Rename to...
(alt_mon): This, then apply spelling corrections.
(mon): New entry, month names in the genitive case.
Rafal Luzynski [Fri, 21 Jun 2019 18:18:48 +0000 (20:18 +0200)]
nl_{AW,NL}: Correct the thousands separator and grouping (bug 23831).
According to CLDR 35.1 and the bug report the thousands grouping
separator should be always "." (a single dot) and digits should be
grouped by 3.
[BZ #23831]
* localedata/locales/nl_AW (mon_thousands_sep): Set to ".".
* localedata/locales/nl_NL (mon_thousands_sep): Likewise.
(thousands_sep): Likewise.
(grouping): Set to 3;3.
Tobias Klauser [Fri, 21 Jun 2019 13:36:52 +0000 (10:36 -0300)]
Add missing VDSO_{NAME,HASH}_* macros and use them for PREPARE_VERSION_KNOWN
Define all currently used Linux versions used for
PREPARE_VERSION{,_KNOWN} in sysdeps/unix/sysv/linux/dl-vdso.h and use
them instead of duplicating the versions and precomputed hashes across
architecture specific files.
* sysdeps/unix/sysv/linux/aarch64/gettimeofday.c (INIT_ARCH): Use
PREPARE_VERSION_KNOWN.
* sysdeps/unix/sysv/linux/aarch64/init-first.c: Likewise.
* sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME_LINUX_2_6_39): New
define.
(VDSO_HASH_LINUX_2_6_39): Likewise.
(VDSO_NAME_LINUX_4_9): Likewise.
(VDSO_HASH_LINUX_4_9): Likewise.
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c (INIT_ARCH): Likewise.
* sysdeps/unix/sysv/linux/powerpc/init-first.c
(_libc_vdso_platform_setup): Likewise.
* sysdeps/unix/sysv/linux/powerpc/time.c (INIT_ARCH): Likewise.
* sysdeps/unix/sysv/linux/s390/init-first.c (_libc_vdso_platform_setup):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/init-first.c (__vdso_platform_setup):
Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Mike Crowe [Wed, 19 Jun 2019 21:07:58 +0000 (18:07 -0300)]
nptl: Convert various tests to use libsupport
* nptl/eintr.c: Use libsupport.
* nptl/tst-eintr1.c: Likewise.
* nptl/tst-eintr2.c: Likewise.
* nptl/tst-eintr3.c: Likewise.
* nptl/tst-eintr4.c: Likewise.
* nptl/tst-eintr5.c: Likewise.
* nptl/tst-mutex-errorcheck.c: Likewise.
* nptl/tst-mutex5.c: Likewise.
Mike Crowe [Wed, 19 Jun 2019 21:06:14 +0000 (18:06 -0300)]
support: Invent verbose_printf macro
Make it easier for tests to emit progress messages only when --verbose is
specified.
* support/test-driver.h: Add verbose_printf macro.
Mike Crowe [Wed, 19 Jun 2019 21:05:12 +0000 (18:05 -0300)]
support: Add xclock_now helper function.
It's easier to read and write tests with:
const struct timespec ts = xclock_now(CLOCK_REALTIME);
than
struct timespec ts;
xclock_gettime(CLOCK_REALTIME, &ts);
* support/xtime.h: Add xclock_now() helper function.
Dmitry V. Levin [Wed, 13 Feb 2019 01:20:51 +0000 (01:20 +0000)]
libio: do not attempt to free wide buffers of legacy streams [BZ #24228]
Commit
a601b74d31ca086de38441d316a3dee24c866305 aka glibc-2.23~693
("In preparation for fixing BZ#16734, fix failure in misc/tst-error1-mem
when _G_HAVE_MMAP is turned off.") introduced a regression:
_IO_unbuffer_all now invokes _IO_wsetb to free wide buffers of all
files, including legacy standard files which are small statically
allocated objects that do not have wide buffers and the _mode member,
causing memory corruption.
Another memory corruption in _IO_unbuffer_all happens when -1
is assigned to the _mode member of legacy standard files that
do not have it.
[BZ #24228]
* libio/genops.c (_IO_unbuffer_all)
[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_1)]: Do not attempt to free wide
buffers and access _IO_FILE_complete members of legacy libio streams.
* libio/tst-bz24228.c: New file.
* libio/tst-bz24228.map: Likewise.
* libio/Makefile [build-shared] (tests): Add tst-bz24228.
[build-shared] (generated): Add tst-bz24228.mtrace and
tst-bz24228.check.
[run-built-tests && build-shared] (tests-special): Add
$(objpfx)tst-bz24228-mem.out.
(LDFLAGS-tst-bz24228, tst-bz24228-ENV): New variables.
($(objpfx)tst-bz24228-mem.out): New rule.
Paul A. Clarke [Tue, 11 Jun 2019 19:37:37 +0000 (14:37 -0500)]
[powerpc] add 'volatile' to asm
Add 'volatile' keyword to a few asm statements, to force the compiler
to generate the instructions therein.
Some instances were implicitly volatile, but adding keyword for consistency.
2019-06-19 Paul A. Clarke <pc@us.ibm.com>
* sysdeps/powerpc/fpu/fenv_libc.h (relax_fenv_state): Add 'volatile'.
* sysdeps/powerpc/fpu/fpu_control.h (__FPU_MFFS): Likewise.
(__FPU_MFFSL): Likewise.
(_FPU_SETCW): Likewise.
Stan Shebs [Wed, 19 Jun 2019 20:15:35 +0000 (17:15 -0300)]
powerpc: Fix static-linked version of __ppc_get_timebase_freq [BZ #24640]
__ppc_get_timebase_freq() always return 0 when using static linked
glibc.
This is a minimal example.c to reproduce:
/******************************/
#include <inttypes.h>
#include <stdint.h>
#include <stdio.h>
#include <sys/platform/ppc.h>
int main() {
uint64_t freq = __ppc_get_timebase_freq();
printf("Time Base frequency = %"PRIu64" Hz\n", freq);
if (freq == 0)
return -1;
return 0;
}
/******************************/
Compile command: gcc -static example.c
This bug has been reproduced, fixed and tested on all powerpc platforms
(ppc32, ppc64 and ppc64le).
The underlying code of __ppc_get_timebase_freq uses __get_timebase_freq
that has a different implementation for shared and static version of
glibc. In the static version, there is an incorrect sense in the if
check for the fd returned when opening /proc/cpuinfo.
This solution is mostly a cherry-pick from:
commit
4791e4f773d060c1a37b27aac5b03cdfa9327afc
Author: Stan Shebs <stanshebs@google.com>
Date: Fri May 17 12:25:19 2019 -0700
Subject: Fix sense of a test in the static-linking version of ppc get_clockfreq
That is in branch glibc/google/grte/v5-2.27/master and was mentioned for
inclusion on master here:
https://www.sourceware.org/ml/libc-alpha/2019-05/msg00409.html
Adapted from original fix for get_clockfreq. That code was moved to
get_timebase_freq.
Also added a static-build testcase for __ppc_get_timebase_freq since the
underlying function has different implementations for shared and static
build.
[BZ #24640]
* sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c
[!SHARED] (__get_timebase_freq): Fix sense of a test in the
static-linking version.
* sysdeps/unix/sysv/linux/powerpc/Makefile
(tests-static): Add test-gettimebasefreq-static.
(tests): Likewise.
* sysdeps/unix/sysv/linux/powerpc/test-gettimebasefreq-static.c:
New file.
Rafal Luzynski [Mon, 17 Jun 2019 23:20:11 +0000 (01:20 +0200)]
nl_AW locale: Correct the negative monetary format (bug 24614).
Follow the same changes as made in the commit
02d8b5ab1c because the
respective entries in nl_NL and nl_AW had been the same before the change
so they should be the same after. CLDR does not provide complete data
for nl_AW, it says it is missing and displays a copy of nl_NL.
[BZ #24614]
* localedata/locales/nl_AW (n_sep_by_space): Set to 2 (a space
between the currency symbol and the minus sign).
(n_sign_posn): Set to 4 (the minus sign after the currency symbol).
Stefan Liebler [Wed, 19 Jun 2019 10:32:04 +0000 (12:32 +0200)]
Fix gcc 9 build errors for make xcheck. [BZ #24556]
This patch fixes the following gcc 9 warnings for "make xcheck" / "make bench":
-string/tst-strcasestr.c:
../include/bits/../../misc/bits/error.h:42:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
-argp/argp-test.c:
argp-test.c:130:20: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
argp-test.c:130:19: note: directive argument in the range [-
2147483648, 122]
argp-test.c:130:5: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 10
-nss/tst-field.c:
tst-field.c:52:7: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
-benchtests/bench-strstr.c:
../include/bits/../../misc/bits/error.h:42:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
-benchtests/bench-malloc-simple.c:
bench-malloc-simple.c:93:16: error: iteration 3 invokes undefined behavior [-Werror=aggressive-loop-optimizations]
ChangeLog:
[BZ #24556]
* string/test-strcasestr.c (check_result): Add NULL check.
* nss/tst-field.c (check_rewrite): Likewise.
* benchtests/bench-strstr.c (do_one_test): Likewise.
* string/test-strstr.c (check_result): Likewise.
* argp/argp-test.c (popt): Increase size of buf to 12.
* benchtests/bench-malloc-simple.c (bench):
Do not initialize tests array out of bounds.
Florian Weimer [Wed, 19 Jun 2019 08:13:50 +0000 (10:13 +0200)]
dlfcn: Avoid one-element flexible array in Dl_serinfo [BZ #24166]
The dls_serpath path field, as an array of length 1, introduces
unexpected array subscript checks with some compilers.
GCC versions before 3.0 treat the nested anonymous union as a
declaration of an unnamed type, and not as a member declaration,
so this construct cannot be used for these compilers.
Florian Weimer [Tue, 18 Jun 2019 14:42:10 +0000 (16:42 +0200)]
elf: Refuse to dlopen PIE objects [BZ #24323]
Another executable has already been mapped, so the dynamic linker
cannot perform relocations correctly for the second executable.
Rafal Luzynski [Wed, 5 Jun 2019 22:22:54 +0000 (00:22 +0200)]
nl_NL locale: Correct the negative monetary format (bug 24614).
According to CLDR 35.1 and the bug report the correct monetary format
for negative amounts should be "EUR -1 234,56" while previously it was
"EUR 1 234,56-".
This patch does not change the thousands (grouping) separator.
[BZ #24614]
* localedata/Makefile (LOCALES): Add nl_NL.UTF-8.
* localedata/locales/nl_NL (n_sep_by_space): Set to 2 (a space
between the currency symbol and the minus sign).
(n_sign_posn): Set to 4 (the minus sign after the currency symbol).
* localedata/tst-strfmon1.c (tests): Add test data for nl_NL.UTF-8.
Adhemerval Zanella [Wed, 29 May 2019 21:39:06 +0000 (18:39 -0300)]
m68k: Remove vDSO support
Although defined in initial TLS/NPTL ABI for m68k and ColdFire [1], kernel
support was never pushed upstream. This patch removes the unused m68k
vDSO support.
Checked with a build against m68k and m68k-coldfire and some basic
tests on ARAnyM.
* sysdeps/unix/sysv/linux/m68k/Makefile (sysdep_routines,
sysdep-rtld-routines): Remove rules.
* sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_PRIVATE]:
Remove __vdso_atomic_cmpxchg_32 and __vdso_atomic_barrier.
(ld) [GLIBC_PRIVATE]: __rtld___vdso_read_tp,
__rtld___vdso_atomic_cmpxchg_32, and __rtld___vdso_atomic_barrier.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h
(atomic_compare_and_exchange_val_acq, atomic_full_barrier): Remove
vDSO path for SHARED.
* sysdeps/unix/sysv/linux/m68k/init-first.c: Remove file.
* sysdeps/unix/sysv/linux/m68k/libc-m68k-vdso.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-helpers.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-vdso.c: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-vdso.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/m68k-helpers.c: New file.
[1] https://lists.debian.org/debian-68k/2007/11/msg00071.html
Adhemerval Zanella [Mon, 18 Mar 2019 11:28:13 +0000 (11:28 +0000)]
powerpc: Refactor powerpc64 lround/lroundf/llround/llroundf
This patches consolidates all the powerpc {l}lround{f} implementations
on the generic sysdeps/powerpc/fpu/s_{l}lround{f}.c.
The IFUNC support is also moved only to powerpc64 only, since for
powerpc64le generic implementation resulting in optimized code.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_llround-power8, s_llround-power6x,
s_llround-power5+, s_llround-ppc64, and s_llroundf-ppc64.
(CFLAGS-s_llround-power8.c, CFLAGS-s_llround-power6x.c,
CFLAGS-s_llround-power5+.c): New rule.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround-power5+.c:
New file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround-power6x.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround-power8.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llroundf-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llround.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llroundf.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_lround.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lround.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/Makefile
[$(subdir) == math] (CFLAGS-s_llround.c): New rule.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_llround-* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround-power5+.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround-power6x.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround-power8.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround-ppc64.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf-ppc64.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lround.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lroundf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llround.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lround.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lroundf.c: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llroundf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Mon, 18 Mar 2019 02:01:03 +0000 (02:01 +0000)]
powerpc: Refactor powerpc32 lrint/lrintf/llrint/llrintf
This patches consolidates all the powerpc llrint{f} implementations on
the generic sysdeps/powerpc/powerpc32/fpu/s_llrint{f}.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cpu and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/s_lrintf.S: Remove file.
* sysdeps/powerpc/powerpc64/fpu/s_lrintf.c: Move to ...
* sysdeps/powerpc/fpu/s_lrintf.c: ... here.
* sysdeps/powerpc/powerpc32/fpu/Makefile
[$(subdir) == math] (CFLAGS-s_lrint.c): New rule.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c (__llrint): Add power4
optimization.
* sysdeps/powerpc/powerpc32/fpu/s_llrintf.c (__llrintf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.c: New file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(CFLAGS-s_llrintf-power6.c, CFLAGS-s_llrintf-ppc32.c,
CFLAGS-s_llrint-power6.c, CFLAGS-s_llrint-ppc32.c,
CFLAGS-s_lrint-ppc32.c): New rule.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint-power6.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf-power6.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrint-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrint.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint-power6.c:
New file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf-power6.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrint-ppc32.c:
Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Sun, 17 Mar 2019 16:46:01 +0000 (16:46 +0000)]
powerpc: refactor powerpc64 lrint/lrintf/llrint/llrintf
This patches consolidates all the powerpc llrint{f} implementations on
the generic sysdeps/powerpc/fpu/s_llrint{f}.
The IFUNC support is also moved only to powerpc64 only, since for
powerpc64le generic implementation resulting in optimized code.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_llrint-power8, s_llrint-power6x, and
s_llrint-ppc64.
(CFLAGS-s_llrint-power8.c, CFLAGS-s_llrint-power6x.c): New rule.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-power6x.c: New
file.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-power8.c:
Likewise.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint-ppc64.c:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_lrint.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lrint.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrint.c: ... here.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Move to ...
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_llrintf.c: ... here.
* sysdeps/powerpc/powerpc64/be/fpu/multiarch/s_lrint.c: New file.
* sysdeps/powerpc/powerpc64/fpu/Makefile: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Remove s_llrint-* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-power6x.S: Remove
file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-power8.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrint.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrintf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Remove file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_lrint.S: Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Florian Weimer [Fri, 14 Jun 2019 14:28:41 +0000 (16:28 +0200)]
Linux: Fix __glibc_has_include use for <sys/stat.h> and statx
The identifier linux is used as a predefined macro, so the actually
used path is 1/stat.h or 1/stat64.h. Using the quote-based version
triggers a file lookup for /usr/include/bits/linux/stat.h (or whatever
directory is used to store bits/statx.h), but since bits/ is pretty
much reserved by glibc, this appears to be acceptable.
This is related to GCC PR 80005: incorrect macro expansion of the
argument of __has_include.
Suggested by Zack Weinberg.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Fri, 14 Jun 2019 13:46:02 +0000 (15:46 +0200)]
<sys/cdefs.h>: Inhibit macro expansion for __glibc_has_include
This is currently ineffective with GCC because of GCC PR 80005, but
it makes sense to anticipate a fix for this defect.
Suggested by Zack Weinberg.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Joseph Myers [Thu, 13 Jun 2019 16:08:20 +0000 (16:08 +0000)]
Add IPV6_ROUTER_ALERT_ISOLATE from Linux 5.1 to bits/in.h.
This patch adds the new constant IPV6_ROUTER_ALERT_ISOLATE from Linux
5.1 to sysdeps/unix/sysv/linux/bits/in.h.
Tested for x86_64.
* sysdeps/unix/sysv/linux/bits/in.h (IPV6_ROUTER_ALERT_ISOLATE):
New macro.
Joseph Myers [Thu, 13 Jun 2019 12:21:50 +0000 (12:21 +0000)]
Allow memset local PLT reference for powerpc soft-float.
Some recent change on GCC mainline resulted in the localplt test
failing for powerpc soft-float (not sure exactly when, as the failure
appeared when there were other build test failures as well;
<https://sourceware.org/ml/libc-testresults/2019-q2/msg00261.html>
shows it remaining when other failures went away). The problem is a
call to memset that GCC now generates in the libgcc long double code.
Since memset is documented as a function GCC may always implicitly
generate calls to, it seems reasonable to allow that local PLT
reference (just like those for libgcc functions that GCC implicitly
generates calls to and that are also exported from libc.so), which
this patch does.
Tested for powerpc soft-float with build-many-glibcs.py.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/localplt.data:
Allow memset in libc.so.
Szabolcs Nagy [Thu, 25 Apr 2019 14:35:35 +0000 (15:35 +0100)]
aarch64: handle STO_AARCH64_VARIANT_PCS
Avoid lazy binding of symbols that may follow a variant PCS with different
register usage convention from the base PCS.
Currently the lazy binding entry code does not preserve all the registers
required for AdvSIMD and SVE vector calls. Saving and restoring all
registers unconditionally may break existing binaries, even if they never
use vector calls, because of the larger stack requirement for lazy
resolution, which can be significant on an SVE system.
The solution is to mark all symbols in the symbol table that may follow
a variant PCS so the dynamic linker can handle them specially. In this
patch such symbols are always resolved at load time, not lazily.
So currently LD_AUDIT for variant PCS symbols are not supported, for that
the _dl_runtime_profile entry needs to be changed e.g. to unconditionally
save/restore all registers (but pass down arg and retval registers to
pltentry/exit callbacks according to the base PCS).
This patch also removes a __builtin_expect from the modified code because
the branch prediction hint did not seem useful.
* sysdeps/aarch64/dl-dtprocnum.h: New file.
* sysdeps/aarch64/dl-machine.h (DT_AARCH64): Define.
(elf_machine_runtime_setup): Handle DT_AARCH64_VARIANT_PCS.
(elf_machine_lazy_rel): Check STO_AARCH64_VARIANT_PCS and bind such
symbols at load time.
* sysdeps/aarch64/linkmap.h (struct link_map_machine): Add variant_pcs.
Szabolcs Nagy [Thu, 25 Apr 2019 14:35:35 +0000 (15:35 +0100)]
aarch64: add STO_AARCH64_VARIANT_PCS and DT_AARCH64_VARIANT_PCS
STO_AARCH64_VARIANT_PCS is a non-visibility st_other flag for marking
symbols that reference functions that may follow a variant PCS with
different register usage convention from the base PCS.
DT_AARCH64_VARIANT_PCS is a dynamic tag that marks ELF modules that
have R_*_JUMP_SLOT relocations for symbols marked with
STO_AARCH64_VARIANT_PCS (i.e. have variant PCS calls via a PLT).
* elf/elf.h (STO_AARCH64_VARIANT_PCS): Define.
(DT_AARCH64_VARIANT_PCS): Define.
Adhemerval Zanella [Mon, 11 Mar 2019 03:29:37 +0000 (03:29 +0000)]
powerpc: Remove optimized finite
The powerpc finite optimization do not show much gain:
- GCC will call libm iff -fsignaling-nans is used. This usage pattern
is usually not performance oriented and for such calls PLT overhead
should dominate execution time.
- The power7 uses ftdiv to optimize for some input patterns, but at
cost of others. Comparing against generic C implementation built
for powerpc64-linux-gnu-power7 (--with-cpu=power7):
- Generic sysdeps/ieee754 implementation:
"isfinite": {
"": {
"duration": 5.0082e+09,
"iterations": 2.45299e+09,
"max": 43.824,
"min": 2.008,
"mean": 2.04167
},
"INF": {
"duration": 4.66554e+09,
"iterations": 2.28288e+09,
"max": 35.73,
"min": 2.008,
"mean": 2.04371
},
"NAN": {
"duration": 4.66274e+09,
"iterations": 2.28716e+09,
"max": 34.161,
"min": 2.009,
"mean": 2.03866
}
}
- power7 optimized one:
"isfinite": {
"": {
"duration": 4.99111e+09,
"iterations": 2.65566e+09,
"max": 25.015,
"min": 1.716,
"mean": 1.87942
},
"INF": {
"duration": 4.6783e+09,
"iterations": 2.0999e+09,
"max": 35.264,
"min": 1.868,
"mean": 2.22787
},
"NAN": {
"duration": 4.67915e+09,
"iterations": 2.08678e+09,
"max": 38.099,
"min": 1.869,
"mean": 2.24228
}
}
So it basically optimizes marginally for normal numbers while
increasing the latency for other kind of FP.
- The power8 implementation is just the generic implementation using
ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation).
So generic implementation is the best option for powerpc64le.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdeps_routines, libm-sysdep_routines): Remove s_finite*
objects.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-power7.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_finitef.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call):
Remove s_finite* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power7.S: Remove file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_finitef.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_finite.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_finitef.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Tue, 26 Mar 2019 17:47:54 +0000 (17:47 +0000)]
math: Use wordsize-64 version for finite
- math.h will use compiler builtin for gcc 4.4 when built without
-fsignaling-nans and the builtin is expanded inline for all
support architectures. As an example, there is no intra finite
call on libm for the architecture I checked, x86, arm, aarch64,
and powerpc.
- The resulting binary difference on 32 bits architecture is minimum
for the non hotspot symbol.
- It helps wordsize-64 architectures that use ldbl-opt.
- It add some code simplification with reduction of duplicated
implementations.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/ieee754/dbl-64/wordsize-64/s_finite.c: Move to ...
* sysdeps/ieee754/dbl-64/s_finite.c: ... here and format code.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Fri, 8 Mar 2019 20:26:00 +0000 (20:26 +0000)]
powerpc: Remove optimized isinf
The powerpc isinf optimizations onyl adds complexity:
- GCC will call libm iff -fsignaling-nans is used. This usage pattern
is usually not performance oriented and for such calls PLT overhead
should dominate execution time.
- The power7 uses ftdiv to optimize for some input pattern and branch
implementation for INF and denormal that does:
return (ix & UINT64_C (0x7fffffffffffffff)) == UINT64_C (0x7ff0000000000000)
Although it does show slight better latency than generic algorithm
(as below), it is only for power7 and requires it to override it
for power8.
- The power8 implementation is just the generic implementation using
ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation).
So generic implementation is the best option for powerpc64le.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdeps_routines, libm-sysdep_routines): Remove s_isinf* and s_isinf*
objects.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf-power7.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff-ppc32.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_isinf.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_isinff.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_call):
Remove s_isinf* and s_isinf* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_isinf.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_isinff.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_isinf.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_isinff.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Tue, 26 Mar 2019 17:32:26 +0000 (17:32 +0000)]
math: Use wordsize-64 version for isinf
- math.h will use compiler builtin for gcc 4.4 when built without
-fsignaling-nans and the builtin is expanded inline for all
support architectures. As an example, there is no intra isinf
call on libm for the architecture I checked, x86, arm, aarch64,
and powerpc.
- The resulting binary difference on 32 bits architecture is minimum
for the non hotspot symbol.
- It helps wordsize-64 architectures that use ldbl-opt.
- It add some code simplification with reduction of duplicated
implementations.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/ieee754/dbl-64/wordsize-64/s_isinf.c: Move to ...
* sysdeps/ieee754/dbl-64/s_isinf.c: ... here and format code.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Fri, 8 Mar 2019 19:32:15 +0000 (19:32 +0000)]
powerpc: Remove optimized isnan
The powerpc isnan optimizations are not really a gain:
- GCC will call libm iff -fsignaling-nans is used. This usage pattern
is usually not performance oriented and for such calls PLT overhead
should dominate execution time.
- The power5, power6, and power6x are just micro-optimization to
improve the Load-Hit-Store hazards from floating-point to general
register transfer, and current GCC already has support to minimize
it by inserting either extra nops or group dispatch instructions.
- The power7 uses ftdiv to optimize for some input patterns, but at
cost of others. Comparing against generic C implementation built
for powerpc-linux-gnu-power4 (which uses the hp-timing support on
benchtests):
- Generic sysdeps/ieee754 implementation:
"isnan": {
"": {
"duration": 4.98415e+09,
"iterations": 2.34516e+09,
"max": 45.925,
"min": 2.052,
"mean": 2.12529
},
"INF": {
"duration": 4.74057e+09,
"iterations": 1.69761e+09,
"max": 91.01,
"min": 2.052,
"mean": 2.79249
},
"NAN": {
"duration": 4.74071e+09,
"iterations": 1.68768e+09,
"max": 282.343,
"min": 2.052,
"mean": 2.809
}
}
- power7 optimized one:
$ ./testrun.sh benchtests/bench-isnan
"isnan": {
"": {
"duration": 4.96842e+09,
"iterations": 2.56297e+09,
"max": 50.048,
"min": 1.872,
"mean": 1.93854
},
"INF": {
"duration": 4.76648e+09,
"iterations": 1.54213e+09,
"max": 373.408,
"min": 2.661,
"mean": 3.09084
},
"NAN": {
"duration": 4.76845e+09,
"iterations": 1.54515e+09,
"max": 51.016,
"min": 2.736,
"mean": 3.08607
}
}
So it basically optimizes marginally for normal numbers while
increasing the latency for other kind of FP.
- The generic implementation requires getting the floating point
status, disable the invalid operation bit, and restore the
floating-point status. Each operation is costly and requires
flushing the FP pipeline.
Using the same scenarion for the previous analysis:
"isnan": {
"": {
"duration": 5.08284e+09,
"iterations": 6.2898e+08,
"max": 41.844,
"min": 8.057,
"mean": 8.08108
},
"INF": {
"duration": 4.97904e+09,
"iterations": 6.16176e+08,
"max": 39.661,
"min": 8.057,
"mean": 8.08055
},
"NAN": {
"duration": 4.98695e+09,
"iterations": 5.95866e+08,
"max": 29.728,
"min": 8.345,
"mean": 8.36925
}
}
- The power8 implementation is just the generic implementation using
ISA 2.07 mfvsrd instruction (which GCC uses for generic implementation).
So generic implementation is the best option for powerpc64le.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/s_isnan.c: Remove file.
* sysdeps/powerpc/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdeps_routines, libm-sysdep_routines): Remove s_isnan-* and
s_isnanf-* objects.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power5.S:
Remove file
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power6.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-power7.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf-power5.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf-power6.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf.c: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdep_calls):
Remove s_isnan-* and s_isnanf-* objects.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power5.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power6.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power6x.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnanf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power5/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/fpu/s_isnanf.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_isnan.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_isnanf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Tue, 26 Mar 2019 13:32:19 +0000 (13:32 +0000)]
math: Use wordsize-64 version for isnan
- math.h will use compiler builtin for gcc 4.4 when built without
-fsignaling-nans and the builtin is expanded inline for all
support architectures. As an example, there is no intra isnan
call on libm for the architecture I checked, x86, arm, aarch64,
and powerpc.
- The resulting binary difference on 32 bits architecture is minimum
for the non hotspot symbol.
- It helps wordsize-64 architectures that use ldbl-opt.
- It add some code simplification with reduction of duplicated
implementations.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/ieee754/dbl-64/wordsize-64/s_isnan.c: Move to ...
* sysdeps/ieee754/dbl-64/s_isnan.c: ... here and format code.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Wed, 27 Mar 2019 14:10:13 +0000 (14:10 +0000)]
benchtests: Add isnan/isinf/isfinite benchmark
* benchtests/Makefile (bench-math): Add isnan, isinf, and isfinite.
(CFLAGS-bench-isnan.c, CFLAGS-bench-isinf.c,
CFLAGS-bench-isfinite.c): New rule.
* benchtests/isnan-input: New file.
* benchtests/isinf-input: New file.
* benchtests/isfinite-input: New file.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Fri, 8 Mar 2019 16:55:52 +0000 (16:55 +0000)]
powerpc: copysign cleanup
GCC always expand copysign{f} for all possible cpus, so calling the libm
is only done if user explicitly states to disable the builtin (which is
done usually not for performance reason). So to provide ifunc variant
for copysign is just unrequired complexity, since libm will be called
on non-performance critical code.
This patch removes both powerpc32 and powerpc64 ifunc variants and
consolidates the powerpc implementation on
sysdeps/powerpc/fpu/s_copysign{f}.c using compiler builtins.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/s_copysign.c: New file.
* sysdeps/powerpc/fpu/s_copysignf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_copysignf.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(sysdep_routines, libm-sysdep_routines): Remove s_copysign-power6 and
s_copysign-ppc32.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign-power6.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c:
Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysignf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile (sysdeps_calls):
Remove s_copysign-power6 s_copysign-ppc64.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign-power6.S:
Remove file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign-ppc64.S:
Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_copysignf.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysignf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Adhemerval Zanella [Fri, 8 Mar 2019 20:26:36 +0000 (20:26 +0000)]
powerpc: consolidate rint
This patches consolidates all the powerpc rint{f} implementations on
the generic sysdeps/powerpc/fpu/s_rint{f}.
Checked on powerpc-linux-gnu (built without --with-cpu, with
--with-cpu=power4 and with --with-cpu=power5+ and --disable-multi-arch),
powerpc64-linux-gnu (built without --with-cp and with --with-cpu=power5+
and --disable-multi-arch).
* sysdeps/powerpc/fpu/round_to_integer.h (set_fenv_mode,
round_to_integer_float, round_mode): Add RINT handling.
(reset_fenv_mode): New symbol.
* sysdeps/powerpc/fpu/s_rint.c (__rint): Use generic implementation.
* sysdeps/powerpc/fpu/s_rintf.c (__rintf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Likewise.
Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Florian Weimer [Wed, 12 Jun 2019 12:48:33 +0000 (14:48 +0200)]
libio: freopen of default streams crashes in old programs [BZ #24632]
As seen with very old i386 GCC binaries.
Florian Weimer [Wed, 12 Jun 2019 12:32:08 +0000 (14:32 +0200)]
Linux: Deprecate <sys/sysctl.h> and sysctl
Now that there are no internal users of __sysctl left, it is possible
to add an unconditional deprecation warning to <sys/sysctl.h>.
To avoid a test failure due this warning in check-install-headers,
skip the test for sys/sysctl.h.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Wed, 12 Jun 2019 10:04:09 +0000 (12:04 +0200)]
<sys/stat.h>: Use Linux UAPI header for statx if available and useful
This will automatically import new STATX_* constants. It also avoids
a conflict between <sys/stat.h> and <linux/stat.h>.
Florian Weimer [Wed, 12 Jun 2019 08:41:19 +0000 (10:41 +0200)]
<sys/cdefs.h>: Add __glibc_has_include macro
projects / external / glibc.git / log